Steam Cleaner
OWNER’S MANUAL
Model SC507
120V., 60 Hz, 1550 Watts
USA: EURO-PRO Operating LLC
94 Main Mill Street, Door 16
Plattsburgh, NY 12901
Canada: EURO-PRO Operating LLC
4400 Bois Franc
St. Laurent, QC H4S 1A7
Tel: 1 (800) 798-7398
Download from Www.Somanuals.com. All Manuals Search And Download.
TIPS ON HOW TO USE YOUR SYSTEM
IMPORTANT SAFETY INSTRUCTIONS
When using your Steam Cleaner, basic safety precautions should always be
observed, including the following:
ALWAYS FINISH CLEANING BY WIPING DOWN THE CLEANED SURFACE
WITH A TOWEL
Hints
To reduce the risk of fire, electric shock, or
injury:
1. Read all instructions before using your
steam cleaner.
2. Use the system only for its intended use.
3. To protect against a risk of electric shock,
do not immerse any part of the system in
water or other liquids.
4. Never yank cord to disconnect from
outlet; instead, grasp plug and pull to
disconnect.
Refrigerator - Use the concentrator to
The steam cleaner has many uses that
blow away dirt in the ice machine and
have not been mentioned. This was
on door seals. The vapor will not dry
meant only to give you a general idea of
out or crack the seals as chemicals
what can be achieved with the unit.
often do. Can openers and other
However, the ways in which to use the
kitchen equipment can be easily
•
Do not leave the steam cleaner plugged
in when unattended. Unplug the electrical
cord when not in use and before servicing
or refilling water tank.
•
•
•
Do not allow to be used as a toy. Close
attention is necessary when used by or
near children, pets or plants.
Use only as described in this manual. Use
only manufacturer’s recommended
accessories.
Do not pull cord, use cord as a handle,
close a door on cord, or pull cord around
sharp edges or corners. Keep cord away
from heated surfaces.
attachments and brushes are in most
cleaned with the bristle brush to get into
cases universal. It is most helpful to
all the nooks and crannies. Mold stains
always have a terry cloth towel or paper
around door gaskets can be removed
towel ready to use for removal of
5. Do not allow cord to touch hot surfaces.
Let the system cool completely before
putting away or opening water tank
(removing the safety cap). Wrap cord
loosely around system when storing.
6. Always disconnect system from electrical
outlet when filling with water or emptying
and when not in use. Always turn the
safety cap slowly when opening the water
tank . This will allow any remaining steam
to escape gradually.
7. Do not operate the system with a damaged
cord or plug, or if the appliance or any other
part of the system has been dropped or
damaged. To avoid the risk of electric
shock, do not disassemble or attempt to
repair the steam cleaner. Return the
system to EURO-PRO Operating LLC (see
warranty) for examination and repair.
Incorrect re-assembly or repair can cause a
risk of electrical shock or injury to persons
when the steam cleaner is used.
8. Close supervision is necessary for any
appliance being used by or near children.
Do not leave the system unattended while
connected to electrical outlet or when hot.
9. Burns can occur from touching hot metal
parts, hot water or steam. Use caution
when draining unit after use as there may
be hot water in the unit. Never direct steam
at any person. The steam is very hot and
can cause burns.
10. Do not operate in the presence of
explosive and/or flammable fumes.
11. This appliance is intended only for
household use. Follow all user instructions
in this manual.
with the bristle brush.
moisture and residue. 100% white
To clean microwaves or other small
cotton towels work best.
appliances use the nylon bristle brush
You can clean the brushes with your
for small areas.
steam cleaner. When cleaning the
Note: When cleaning small electrical
bristle brushes, use a pair of pliers to
appliances always unplug them from
hold and blow dirt as above or place in
outlet before cleaning. Do not direct
the basket of your dishwasher.
•
•
•
•
•
•
Do not use extension cords or outlets with
inadequate current carrying capacity.
Do turn off all controls as applicable
before unplugging from electrical outlet.
Do not unplug by pulling on cord. To
unplug, grasp the plug, not the cord.
Do not handle plug or steam cleaner with
wet hands or operate without shoes.
Do not put any objects into openings. Do
not use with any opening blocked.
ALWAYS STORE YOUR APPLIANCE
INDOORS in a cool, dry area.
steam into any openings of the
appliances.
To clean counter tops, use the bristle
brush first in order to loosen the debris,
then wipe with a terry cloth towel to
finish.
Note: Wipe with a towel immediately
before the cleaned area dries. When
cleaning the oven, use the bristle brush
to clean around the elements and drip
trays. Use the bristle brush for cracks,
crevices, and hard to reach areas.
•
•
Do keep your work area well lit.
Do Not turn the appliance over or on its
side. Never direct steam towards
people, animals or plants.
ORDERING SUPPLIES
If you need to order supplies such as steam pocket towels, etc. please call
the customer service number at 1 (800) 798-7398.
•
•
Do not immerse the steam cleaner into
water or other liquids. Always unplug the
power cord from the electrical socket
when filling the steam cleaner.
Do NOT add cleaning solutions,
scented perfumes, oils or any other
chemicals to the water used in this
appliance as this may damage the unit
or make it unsafe for use. Use tap water
or distilled/purified water if the tap water in
your area is very hard.
12. Never use any chemicals or substance
other than tap water in the machine. Use of
chemicals may damage the machine. Use
of chemicals will automatically void your
warranty.
SAVE THESE INSTRUCTIONS
For Household Use Only
12
1
Rev. 09/04A
Download from Www.Somanuals.com. All Manuals Search And Download.
TIPS ON HOW TO USE YOUR SYSTEM
ADDITIONAL IMPORTANT SAFEGUARDS
Fiberglass or Stainless Steel Surfaces
Blinds
1. To avoid circuit overload, do not operate another appliance on the same socket
(circuit) as the steam cleaner.
2. If an extension cord is absolutely necessary, an extension cord rated a minimum
of 15 ampere, 14 gage cord should be used. Cords rated for less amperage may
overheat. Care should be taken to arrange cord so that it cannot be pulled or
tripped over.
Use the bristle brush. Slowly move the
brush over the surface to be cleaned.
The vapor will emulsify the dirt and
grease on the surface. Follow behind
with a terry cloth towel over the brush to
remove excess moisture and residue.
Tip: An old idea for polishing stainless
steel is to wipe it down with seltzer soda
water after it is cleaned.
Use the nylon bristle brush to clean
blinds. Move the brush over the
surface, allowing enough time for the
vapor to penetrate. Work quickly on
PVC blinds. Test for color fastness on
fabric blinds before using. Finish by
wiping with a towel.
3. Do not leave unattended when the system is connected to a power
supply/electrical outlet.
Automotive
For detailing the wheels, use the
concentrator and the bristle brush.
Exterior windows are cleaned best by
applying the vapor with the concentrator
and following with a paper towel.
To clean bicycles, use the bristle brush.
To clean equipment, use the bristle
brush, depending on the surface area.
Finish by wiping down with a towel.
Bathroom Areas
WARNING: This appliance is equipped with a grounded,
type 3-wire cord (3-prong plug). This plug will only fit into an
electrical outlet made for a 3-prong plug. This is a safety
feature. If the plug should fail to fit the outlet, contact an
electrician to replace the outlet. Do not attempt to defeat the
safety purpose of the grounding pin, part of the 3-prong plug.
To clean the bathtub or shower area, use
the bristle brush for grout, shower door
tracks, hard to get areas and heavily
soiled areas. The dual edge window/tile
squeegee will be the most efficient way
to clean the rest of the area. Allow plenty
of time for the heat to penetrate the
surface. This is especially helpful in the
shower area if there is tile or grout. Wipe
with towel.
Removal of soap scum on tile, grout, and
shower doors is also easier with the
steam cleaner.
To clean sanitary fixtures, use the
concentrator with or without bristle brush.
Use a terry cloth towel or paper towel to
wipe up excess moisture and residue.
To clean the sink and faucets, use bristle
brush then finish by wiping with a towel.
Artificial Plants
Use the concentrator without a brush
attached to blow off the dust and dirt.
CAUTION: Always drain condensed water from hose
before use or if unit has been left idle for a period of time. To
drain hose, direct nozzle into an appropriate container or sink
and depress hand grip steam trigger. Once hose has been
drained, normal use may be resumed. Never direct nozzle
towards people, animals or plants.
Clothing
A vapor cleaning system is excellent for
removing wrinkles from fabrics. Simply
“vaporize” the surface from a distance
(12”-18”) The dry vapor removes
wrinkles without leaving the fabric wet
like ordinary fabric steamers do.
WARNING: Your Steam Cleaner is designed to clean hard surfaces
and upholstery that will withstand high heat. Do not use on soft plastics
and cold glass. On surfaces that have been treated with wax or some no
wax floors, the sheen may be removed by the heat and steam action. Do
not use on unsealed wood. This could cause the wood grain to rise. It is
therefore recommended to test an isolated area of the surface to be
cleaned before proceeding.
Nicotine and Tar
Nicotine and tar dissolves at high
temperatures and becomes a light
yellow oil that has the consistency of
sewing machine oil. When the
nicotine/tar film is touched by steam
pocket, it immediately dissolves and
flows into the steam pocket towel. You
can remove it from flat surfaces as fast
as you can move the steam pocket over
the surface.
Soap Scum
Soap scum dissolves almost immediately
under a combination of heat and
moisture. Rinse the surface with a small
amount of water afterwards or go back
over it once more with a clean terry cloth
towel.
Note: Soap scum sometimes will develop
a hard surface from waterborne minerals.
If this is the case, use the bristle brush to
break up this surface - or spray or wipe
first with lemon, vinegar or seltzer soda
water to soften the minerals.
Moving too slowly can dry out the soap
scum and cause it to granulate on the
surface. The surface will have a gritty
feel. If this happens, apply vapor to the
surface with the bristle brush again and
re-clean.
IMPORTANT: Do NOT add cleaning solutions, scented perfumes, oils or
any other chemicals to the water used in this appliance.
Use regular water or distilled/purified water if the tap
water in your area is very hard.
Removing Wax, Tar, Etc.
Many stains are only stuck on the
surface of materials and can be easily
and quickly removed by “blowing”
excess material away from the surface
from the side. This is accomplished by
using the concentrator. Hold the terry
cloth towel to the side to catch the loose
residue as it is blown by the
WARNING: Danger of Scalding. Please use caution when using the
steam cleaner. The steam emitted from this opening is very hot.
concentrator. Note: Always vacuum
any loose residue off the surface before
you apply vapor to it.
Garden Furniture
Use any of the brushes depending on the
surface area. Work quickly when
cleaning resin outdoor furniture. Finish by
wiping with a towel.
SAVE THESE INSTRUCTIONS
FOR HOUSEHOLD USE ONLY
2
11
Download from Www.Somanuals.com. All Manuals Search And Download.
TIPS ON HOW TO USE YOUR SYSTEM
GETTING TO KNOW YOUR STEAM CLEANER
Wood, Vinyl and Marble Floors
Spot Cleaning (Carpets)
Use the Steam Pocket ™ to clean wood,
vinyl and marble floors. Move the
Steam Pocket™ across the floor as if
you are mopping. When one side of the
towel is soiled, turn the Steam Pocket™
frame and use the other side. One of
the great advantages of using our
Steam Pocket™ is that your floor will dry
faster than if you used a mop or other
floor cleaning device. It is normal that
some moisture may be left behind
depending on how quickly you move the
Steam Pocket™ across the floor and the
relative heat and humidity of the room.
Be sure to move quickly and steadily
over wood, linoleum and vinyl flooring to
avoid damaging the surface and
Use the concentrator with or without the
bristle brush. Move slowly over the soiled
area, allowing the steam to penetrate.
Agitate with bristle brush or clean towel.
Dab the spot with the towel (do not rub).
Repeat as necessary to remove stain.
Vacuum only after the carpet has
completely dried.
Always test color fastness of carpet in an
inconspicuous area before cleaning.
If your steam cleaner fails to remove
stubborn stains a commercially available
carpet shampoo may be required. Do
NOT add cleaning solutions, scented
perfumes, oils or any other chemicals to
the water used in this appliance as this
may damage the unit or make it unsafe
for use.
removing wax.
To Clean Waxed Floors: Use the
Steam Pocket™ with quick strokes.
This will cause the dirt to be removed
but not the wax.
Vinyl Floors: Do not allow heat to build
up in any kind of vinyl since it can soften
it enough to affect its texture. Work fast
on vinyl.
Tile Floors: Use the concentrator with
the bristle brush. Have the Steam
Pocket™ ready as well. Clean the grout
between the tiles with the bristle brush.
Remove the concentrator and bristle
brush and attach the hose and Steam
Pocket™. Move the Steam Pocket™
across the floor to clean the tile and
remove excess moisture and residue.
14b
a
CAUTION: Always determine
the color-fastness of any fabric-
especially with reds or blues - by taking a
clean, moist, warm towel and gently
rubbing a small area as far down on the
back or other out of the way place on the
furniture as possible. If color comes off
on the towel, you may need to have the
piece dry cleaned.
1. Main Unit
9. Steam Trigger
10. Steam Trigger Lock
11. Locking Button
2. Handle
3. Shoulder Strap
4. Power “On” (Red) / Steam Ready
(Green) Light
5. Safety Cap
6. Power Cord
Window, Glass Surfaces and Mirrors
12. Variable Steam Control
13. Window Squeegee
14a. Steam Pocket Frame
14b. Steam Pocket Angle Adapter
15. Steam Pocket Towel
16. Extension Tubes (x2)
17. Funnel
Use the window squeegee. Work with
the vapor jet on using the top to bottom
movements. Use the squeegee with the
vapor off to clear the water from the
glass. To do this without leaving streaks,
use lateral movements from the top to
the bottom of the surface.
7. Flexible Hose
8. Hand Grip
18. Concentrator
19. Nylon Bristle Brushes (x2)
CAUTION: When cleaning
windows, always avoid any sudden
changes in temperature to prevent glass
breakage or cracks.
Technical Specifications
Voltage:
120V., 60Hz.
Power:
1550 Watts
Water Capacity:
Steam Generator:
27 US fl. oz. (800 ml.)
Stainless Steel
* Illustrations may differ from actual product.
10
3
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES OF STEAM CLEANER
TIPS ON HOW TO USE YOUR SYSTEM
Water
4. Heavy-duty crush-resistant
Care and Maintenance
1. Multipurpose Steam Cleaner:
•
Use tap water for all your cleaning
needs.
hose.
Bathrooms, kitchens, living
areas, pet areas and
appliances.
If you consistently use demineralized or
distilled water, cleaning the tank is
unnecessary.
•
However, if you live in an area with
hard water, use de-mineralized /
distilled water when steaming light
colored fabrics to eliminate the
possibility of hard water stains.
Automotive, patio and
windows.
Rinsing Out the Steam Cleaner
Normally, a periodic rinse of your steam
cleaner will free it from deposits. This is
recommended every 10-15 tankfulls, to
free up any scale deposits from the tank.
Fill the boiler with 20 oz. of water and
shake the cleaner vigorously. Tilt the
cleaner upside down to empty the boiler of
water and any scale deposits.
IMPORTANT: Do NOT add cleaning
solutions, scented perfumes, oils or any
other chemicals to the water used in
this appliance. Use tap water or
distilled/purified water if the tap
water in your area is very hard.
2. Lightweight & Portable
5. Versatile, quick-change
accessories
Descaling Your Steam Cleaner
If the tap water in you area contains a high
level of calcium deposits and you have
been using tap water to do your steam
cleaning, you should descale your unit
after 10-15 tankfulls.
Efficient Work
•
For vertical surfaces, wipe with a
towel from the top down, in this
way the dirty water will not soil
surfaces already cleaned.
•
•
•
Avoid changing brushes back and
forth while cleaning.
Start with the smallest brush to
clean tight spots and corners first.
Use a towel to wipe dirt as soon as
possible, otherwise it will dry and
re-adhere to the surface.
To Descale the Steam Cleaner
Step 1: Unplug the steam cleaner from
the power source before you
descale the boiler. Allow to cool
for 15 minutes.
Step 2: Fill the boiler with 1 part
vinegar and 5 parts water and
leave overnight or for a period
of approximately 8 hours. Do
not screw the safety/filler cap
onto the steam cleaner while
you are descaling the boiler.
3. Stainless Steel Boiler:
Non-corroding, stainless
steel boiler. Welded
construction.
Do not use the steam cleaner
while descaling solution is
inside the boiler.
Step 3: After the period of soaking, turn
the steam cleaner upside down
to empty solution from the
boiler. Due to the fact that a
small amount of solution will be
left in the boiler, it is necessary
to rinse the boiler out with clean
water 2 or 3 times. Your steam
cleaner is now ready for use.
Note: When storing your unit, always
drain any residual water in the boiler and
do not tighten the safety filler cap onto
the unit. Always leave the safety filler cap
loose on the unit when not in use.
4
9
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS
Attaching the Shoulder Strap
Components
Using the detachable shoulder strap
allows for greater freedom of movement
when both hands are needed for
various cleaning tasks. To attach the
shoulder strap to the steam cleaner,
simply snap the shoulder strap hooks
onto the connecting rings on the unit
body. See Fig. 11, 12 & 13.
Power “On” Light (red): This light will
illuminate when the unit is plugged into
the 120V. wall outlet. It will then turn
“green” when the steam is ready.
CAUTION: Read the instructions
for “Filling the Water Tank” before
opening the Safety Cap.
Fig. 13
CAUTION: Always unplug
before filling. ALLOW UNIT TO
COOL FOR FIFTEEN (15)
Connecting
points
Fig. 1
MINUTES BEFORE REFILLING.
IMPORTANT: Do NOT add cleaning
solutions, scented perfumes, oils or any
other chemicals to the boiler in this
appliance. Use tap water or
Fig. 11
distilled/purified water if the tap water
in your area is very hard.
Filling or Refilling Your Steam
Cleaner With Water
IMPORTANT: When using the
steam cleaner with the shoulder
strap, avoid rocking or tilting the unit
excessively as this may cause water
to enter the hose and be discharged
along with the steam.
IMPORTANT: Always insure that the unit
is “UNPLUGGED” from the wall receptacle
prior to initial filling or re-filling the water
tank and has been allowed to cool for 15
minutes. Never attempt to fill this unit
under a water tap, always use the filling
funnel provided.
Fig. 2
Fig. 12
WARNING:Allow unit to cool
for 15 minutes before refilling.
When refilling the steam cleaner
while the boiler is still hot, there is
a risk that water will squirt back
during filling and cause scalding.
Extreme care should be taken
when refilling the unit. Use
caution when opening the Safety
Cap as it may become hot during
use and escaping steam can
cause scalding.
Step 1: Before refilling the steam cleaner,
make sure that the unit is NOT
plugged in and has been allowed to
cool for fifteen (15) minutes.
Step 2: Plug the power cord in to an electrical
outlet and press the steam trigger on
the hand grip to vent any residual
steam that is in the boiler.
Step 3: Remove the power cord from the
electrical outlet.
Step 4: Place the unit on a flat, stable
surface. Slowly turn the safety filler
cap counter clockwise until it is
removed.
Step 6: Connect desired attachments
onto the end of the hand grip.
Step 7: Plug the unit into a standard
(120 volt, grounded) wall
Step 5: Insert the funnel into the tank
opening and add 27 US fl, oz.
(800 ml) of water. (Fig. 2) Place the
funnel in the tank opening as
receptacle. Allow approximately
8-10 minutes for vapor to reach
its working temperature and
pressure. When the unit is ready
for use, the red light will change
to green. Always point nozzle
outlet in a safe direction. At the
start, some water will come out
from the nozzle. This is normal.
NOTE: When the steam cleaner has run
out of water, steam output will
cease.
illustrated in Fig. 1. The funnel has
been specially designed to show
when the water tank is full. When
water starts to come out of the vent
hole of the funnel, the tank is full.
Remove the funnel slowly and let the
remaining water in it to go inside the
water tank. Do Not Overfill. Replace
the Safety Cap.
8
5
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS
Using the Trigger Lock
• Air dry the towel. Do not put in a clothes
3. Bring the velcro strips
that are on the
Locking Button
The steam cleaner has a steam trigger
lock. The steam trigger will lock when
you have pushed it all the way in.
(Fig. 3) To unlock the steam trigger, just
press it in the other direction. If you
want to have continuous steam,
dryer as high heat will cause the towel to
shrink and the microfibers to break down.
• If you wash your towel on a regular basis
and don’t let them get too dirty, they will
last much longer. As with any fabric, dirt
particles, grease and other contaminants
can cause the fibers to break down,
back side of the
steam pocket towel
over the steam pocket
frame and attach to
the inside of the
front side of the
steam pocket towel.
(Fig. 10)
NOTE: When replacing the steam pocket
towel, make sure that the steam pocket
frame has been allowed to cool before
removing or attaching a new steam
pocket towel.
Hand Grip
Fig. 6
Fig. 5
depress the steam trigger and then
push in the steam trigger lock.
Fig. 10
therefore regular cleaning will help
preserve your microfiber towels.
NOTE: Fit the steam pocket frame with
the angle adapter onto the extension
tube.
Step 2. If the angle adapter is not
attached to the steam pocket
frame, attach as follows: Hold
the steam pocket frame in one
hand and the
• As you use the microfiber towel, you will
notice that sometimes a thread will loosen
or pull out. This is normal and you should
NEVER PULL AT THE LOOSE THREAD!
Pulling the thread can cause the weave to
come undone. Instead, simply trim the
thread with a pair of sharp scissors.
Fig. 3
Care & Maintenance of the Steam
Pocket Towel
Due to the unique cleaning ability of this
cloth, proper care of your microfiber towel is
required to ensure long life and continued
cleaning ability.
angle adapter in the
other. Insert the
angle adapter
stem into the
opening of the
steam pocket
frame as shown in
WARNING: This appliance is
under pressure. After every use,
unplug the unit and press the
steam trigger button until all
pressure has been released
before removing safety cap.
Allow unit to cool for fifteen (15)
minutes before refilling.
Attaching the Accessories to the
Flexible Steam Hose
Allow the unit to cool for 15 minutes
before changing accessories.
Fig. 7
• The first thing you should do when
you get a new microfiber towel is to
wash and dry it. During the manufacturing
process the fabric has a tendency to
become flat as it picks up contaminants
from the air and machinery. There will
also be a number of loose threads that,
while they cause no harm, can be
annoying the first time you use the towel.
• To clean the towel, simply wash it in your
washing machine using the warm water
setting.
• Always wash your towels separately from
other fabrics. They have a tendency to
pick up lint and other particles from other
fabrics and the next time you use your
towel, this lint will transfer to the surface
being cleaned.
• ONLY USE LIQUID DETERGENTS, never
use dry detergents as many times the
granules do not fully dissolve and become
trapped in the towel. This can scratch the
surface that you are cleaning.
• NEVER USE BLEACH OR FABRIC
SOFTENERS! Bleach will damage the
microfiber fabric and fabric softeners
deposit a coating on the microfiber fabric
that will not allow the cloth to clean
efficiently.
Window Squeegee
Fig. 7. Note that the flat on the
nozzle must face toward the
side of the frame with the brass
pin. Once inserted, rotate it 90°
Step 3. Insert the electrical power cord
into the outlet. Heating time is
approximately 8-10 minutes with
cold water. Filling the steam
generator with hot water will
shorten the heat up time.
This attachment is very useful for
cleaning large windows, plastic material,
ceramic, tiled or marble surfaces.
Using the Variable Steam
Feature
Your steam cleaner has a variable
steam feature that allows you to adjust
the steam flow to the job that you are
doing. The variable steam control is
located on the handgrip. To increase
the steam flow, turn the knob counter
clockwise and to decrease, turn it
clockwise. (Fig. 4)
IMPORTANT: When cleaning
windows, always avoid any sudden
changes in temperature to prevent glass
breakage or cracks.
To use: Connect the tile
squeegee to the hand
grip or use with
Attaching the Steam Pocket Towel
to the Frame
extension tube for
hard to reach surfaces.
Apply steam abundantly, rub with the
soft spongy edge, then remove excess
water and dirt with the glass wiping
edge.
WARNING: Always insure the
unit is “UNPLUGGED” from the
wall receptacle prior to attaching
or removing accessories.
Fig. 4
1. Slide the steam
pocket towel over
the steam pocket
frame. (Fig. 8)
Concentrator
Using Your Steam Cleaner with
Steam Pocket
Step 1: Connect one of the extension
tubes to the hand grip on the
flexible steam hose. To
Attach the concentrator
to the handgrip or to the
extension tubes.
Nylon Bristle Brush (x2)
It is best for cleaning grout in-between
the ceramic and marble tiles.
To use: Attach the nylon
bristle brush on to the end
of the concentrator, which
then may be used directly
on the hand grip or with extension
tubes.
Fig. 8
2. Bring the towel all
the way to the top
of the steam
pocket frame.
(Fig. 9)
attach the extension tubes
one onto the other or onto the
hand grip, press the locking
button ensuring that it fits into
the hole. (Fig. 5, Fig. 6) To
disconnect, repeat the
operation by pressing the
locking button and pulling the
two sections apart.
Fig. 9
6
7
Download from Www.Somanuals.com. All Manuals Search And Download.
|