SE4
ROTARY MOWER
Rev 09-05
S/N 16874 -Current
Part No.00760866P
PART'S MANUAL
An Operator's Manual was shipped with the equipment in the
Manual Canister. This Operator's Manual is an integral part of
the safe operation of this machine and must be maintained
with the unit at all times. READ, UNDERSTAND, and FOLLOW
the Safety and Operation Instructions contained in this manual
before operating the equipment. If the Operator's Manual is
not with the equipment, contact your dealer or Servis-Rhino
(800-446-5158) to obtain a Free copy before operating the
equipment.
RHINO®
1020 S. SangamonAve.
Gibson City, IL 60936
800-446-5158
Email: [email protected]
© 2005 Alamo Group Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
PARTS
SECTION
Parts Section – 1
Download from Www.Somanuals.com. All Manuals Search And Download.
PARTS ORDERING GUIDE
Thefollowinginstructionsareofferedtohelpeliminateneedlessdelayanderrorinprocessing
purchase orders for the equipment in this section.
1. The Parts Section is prepared in logical sequence and grouping of parts that belong to the
basic machine featured in this manual. Part Numbers and Descriptions are given to help
locate the parts and quantities required.
2. The Purchase Order must include the name and address of the person or organization
ordering the parts, who should be charged, and if possible, the serial number of the machine
for which the parts are ordered.
3. ThePurchaseOrdermustclearlylistthequantityofeachpart, thecompleteandcorrectpart
number (be sure to include all periods), and the basic name of the part.
4. The Manufacturer reserves the right to substitute parts where applicable.
5. Somepartsareunlisteditemswhicharespecialproductionitemsnotnormallystockedand
are subject to special handling. Request a quotation for such parts before sending a
PurchaseOrder.
6. The Manufacturer reserves the right to change prices without prior notice.
NOTE:
Please refer to The Safety Section in the front of this Manual for the proper
Part Number when ordering Replacement Safety Decals.
For maximum safety and to guarantee optimum product reliability, always use
genuine Servis-Rhino Parts. The use of inferior replacement parts may cause
premature or catastrophic failure which could result in serious injury or death.
Direct any questions regarding parts to:
RHINO®
1020 S. Sangamon Ave.
Gibson City, IL 60936
800-446-5158
Email: [email protected]
Parts Section – 2
©2005 Alamo Group Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
PART NAME INDEX
DRIVELINE ASSEMBLY S/N 16873 -BELOW Rev 10-04..................................................................................................... 8
DRIVELINE ASSEMBLY S/N 16874 -CURRENT Rev 09-05 .............................................................................................. 10
FRONT DEFLECTORS ASSEMBLY.................................................................................................................................... 11
GEARBOX ASSEMBLY.......................................................................................................................................................... 6
HYDRAULIC RELIEF ASSEMBLY (OPTION)...................................................................................................................... 13
MAIN ASSEMBLY................................................................................................................................................................... 4
OFFSET ADAPTER (OPTION) ............................................................................................................................................ 14
REAR DEFLECTORS ASSEMBLY ...................................................................................................................................... 12
SAFETY DECAL SHEETS ................................................................................................................................................... 15
SE4 (Oct-04) S/N 16874 -Current Rev 09-05
©2007 Alamo Group Inc.
Parts Section – 3
Download from Www.Somanuals.com. All Manuals Search And Download.
MAIN ASSEMBLY
SE4 (Oct-04) S/N 16874 -Current Rev 09-05
©2007 Alamo Group Inc.
Parts Section – 4
Download from Www.Somanuals.com. All Manuals Search And Download.
MAIN ASSEMBLY
ITEM
PART NO.
QTY.
DESCRIPTION
00773753
00770773
00770772
00757949R
00770781
00766542
00603500
00770777
00766505
00773564
00755881
00766610
00761655P
00762365
02957510
00768968
02963669
00036900
15B2000
00773768
00773565R
00773566
9143009
00761402
00773812
00761535
00750226
00766590R
00606000
00758692
7192
02958784
00773755R
00762423
00772590
00766611
00770066
001465
00772588
03101646
00773567
00766086
00772291
02958788
-
MAIN ASSEMBLY
LOCKNUT
BOLT
BAR TOP LINK
BOLT
BUSHING
HITCH PIN (CAT 1)
LOCKNUT
A-FRAME BAR
REAR BRACE
LOCKNUT
MOUNTING FLAT
GEARBOX
BOLT
BOLT
LOCKNUT
BOLT
COTTER PIN
WASHER
TAILWHEEL BEAM
CASTER FORK
SPINDLE
1
2
3
4
5
6
7
8
1
1
1
4
1
2
4
2
2
5
1
1
2
1
9
2
1
1
1
1
1
1
2
2
2
2
1
1
1
1
2
1
2
1
1
1
1
1
2
1
1
2
4
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
LOCKNUT
BLADE BOLT
SUCTION BLADE
WASHER
LOCKNUT
DISHPAN
COTTER PIN
SLOTTED NUT
SNAP RING
BOLT
MAIN FRAME
WASHER
SHIELD BRACKET
GAUGE WHEEL MOUNT
CABLE & PINS ASSY
GREASE FITTING
SHIELD PLATE
LOCKWASHER
TIRE RIM ASSEMBLY
FLATWASHER
HITCH LUG
BOLT
SE4 (Oct-04) S/N 16874 -Current Rev 09-05
©2007 Alamo Group Inc.
Parts Section – 5
Download from Www.Somanuals.com. All Manuals Search And Download.
GEARBOX ASSEMBLY
SE4 (Oct-04) S/N 16874 -Current Rev 09-05
©2007 Alamo Group Inc.
Parts Section – 6
Download from Www.Somanuals.com. All Manuals Search And Download.
GEARBOX ASSEMBLY
ITEM
PART NO.
QTY.
DESCRIPTION
00761655
00564700
00564200
00563700
00564300
00564400
00752481
00564100
00563900
00564800
00752480
00757682
00760928
00760929
02161100
00011400
00563500
00606000
7202
-
1
1
3
1
AR
1
3
1
1
1
1
AR
AR
10
10
1
1
1
GEARBOX ASSY
INPUT SHAFT
SEAL
BALL BEARING
INPUT CAP
1
2
3
4
5
6
7
8
GASKET
INPUT GEAR
RETAINING RING
HOUSING
9
BEARING
10
11
12
OUTPUT PINION & SHAFT
BEARING SPACER
GASKET .25
GASKET .10
LOCKWASHER
BOLT
13
14
15
17
18
19
20
21
22
23
SEAL
COTTER PIN
SLOTTED NUT
WASHER
OUTPUT CAP
BOLT
RETAINING RING
LOCKNUT
QT,ALAMO 000 GEAR LUBE
6192
1
1
1
1
1
1qt
00757683
7A81324
7192
00001800
00765444
SE4 (Oct-04) S/N 16874 -Current Rev 09-05
©2007 Alamo Group Inc.
Parts Section – 7
Download from Www.Somanuals.com. All Manuals Search And Download.
DRIVELINE ASSEMBLY S/N 16873 -BELOW Rev 10-04
SE4 (Oct-04) S/N 16874 -Current Rev 09-05
©2007 Alamo Group Inc.
Parts Section – 8
Download from Www.Somanuals.com. All Manuals Search And Download.
DRIVELINE ASSEMBLY S/N 16873 -BELOW Rev 10-04
ITEM
PART NO.
QTY.
DESCRIPTION
00759161B
00768296
001465
-
DRIVELINE ASSEMBLY
INNER SHAFT & SHIELD ASSY
GREASE FITTING
1
2
3
4
5
6
7
8
1
1
1
2
1
1
1
1
1
1
6
1
1
1
00768257
00756231
00768295
00768294
00768293
00770391
00759170
00764506
00754330
00764507
00775112
00775113
SHEAR BOTL YOKE
CROSS & BEARING KIT
INNER TUBE ASSEMBLY
OUTER SHAFT & SHIELD ASSY
OUTER TUBE ASSEMBLY
TWIST COLLAR KIT
YOKE ASSEMBLY
INNER TUBE BEARING
LOCKING PIN
9
10
11
12
13
14
OUTER TUBE BEARING
INNER HALF SHIELD ASSEMBLY
OUTER HALF SHIELD ASSEMBLY
SE4 (Oct-04) S/N 16874 -Current Rev 09-05
©2007 Alamo Group Inc.
Parts Section – 9
Download from Www.Somanuals.com. All Manuals Search And Download.
DRIVELINE ASSEMBLY S/N 16874 -CURRENT Rev 09-05
ITEM
PART NO.
QTY.
DESCRIPTION
00759161C
00764500A
00756231
----------------
00759169
----------------
----------------
00759165
----------------
00777329A
00764506
00754330
00764507
00768342
----------------
----------------
----------------
----------------
00768294
-
DRIVELINE
1
2
3
4
5
6
7
8
1
2
1
1
1
1
1
1
1
1
6
1
1
1
1
1
1
1
1
1
1
1
ASY,YOKE COLLAR - COMPLETE
CROSS & BEARING KIT SERIES 40
OUTER YOKE
PIN ROLL 8mm X 60mm
OUTER TUBE WITH LABEL
INNER TUBE
PIN ROLL INNER TUBE
INNER YOKE
YOKE, 1-3/8 BORE SP
COLLAR-INNER-GUARD-RETAINER
BOLT, NYLON - SAFETY SHIELD]
COLLAR-OUTER-GUARD-RETAINER
SHIELD, ASY, CMPLT
FEMALE TUBE YOKE WITH LABEL
MALE TUBE YOKE
HALF FEMALE GUARD
HALF FEMALE GUARD
SHAFT, ASY, OUTER W/SHIELD
SHAFT, ASY, INNER W/SHIELD
DANGER LABEL FOR OUTER TUBE
DANGER LABEL FOR OUTER GUARD TUBE
KIT,SLIDE COLLAR REPAIR
9
10
11
12
13
14
15
16
17
18
19
20
21
22
00768296
----------------
----------------
00774079
SE4 (Oct-04) S/N 16874 -Current Rev 09-05
©2007 Alamo Group Inc.
Parts Section – 10
Download from Www.Somanuals.com. All Manuals Search And Download.
FRONT DEFLECTORS ASSEMBLY
ITEM
PART NO.
QTY.
DESCRIPTION
00773940
00001800
00748823
00773944
00773943
-
FRONT DEFLECTOR ASSY
LOCKNUT
BOLT
DEFLECTOR STRAP
DEFLECTOR
1
2
3
4
6
6
1
1
SE4 (Oct-04) S/N 16874 -Current Rev 09-05
©2007 Alamo Group Inc.
Parts Section – 11
Download from Www.Somanuals.com. All Manuals Search And Download.
REAR DEFLECTORS ASSEMBLY
ITEM
PART NO.
QTY.
DESCRIPTION
00761603
00761597
00761596
00761598
00761599
7A181310
00001800
-
REAR DEFLECTOR ASSY
SIDE STRAP
SIDE DEFLECTOR
CENTER DEFLECTOR
CENTER STRAP
BOLT
1
2
3
4
5
6
2
2
1
1
6
6
LOCKNUT
SE4 (Oct-04) S/N 16874 -Current Rev 09-05
©2007 Alamo Group Inc.
Parts Section – 12
Download from Www.Somanuals.com. All Manuals Search And Download.
HYDRAULIC RELIEF ASSEMBLY (OPTION)
ITEM
PART NO.
QTY.
DESCRIPTION
1
2
3
4
8709
8708
02845500
00695100
2
2
2
2
CHAIN ASSEMBLY
BRACKET
BOLT
NUT
SE4 (Oct-04) S/N 16874 -Current Rev 09-05
©2007 Alamo Group Inc.
Parts Section – 13
Download from Www.Somanuals.com. All Manuals Search And Download.
OFFSET ADAPTER (OPTION)
ITEM
PART NO.
QTY.
DESCRIPTION
0702310000
0702310100
0702310001
0702310300
0702310200
511027
7A14924
15B1400
423013
5JRC1490
3W6
02030400
00001300
00001200
7AH5121636
595062
00748539
7AH5101816
00749136
743013
-
OFFSET ADAPTER
ADAPTER MAINFRAME
BRACE BAR
BRACE LUG AND CHAIN
ADJUSTABLE LIFT LUG
WRIST PIN
BOLT
WASHER
BUSHING
LOCKNUT
RETAING PIN
BOLT
LOCKWASHER
HEX NUT
BOLT
SPACER
LOCKNUT
BOLT
LOCKNUT
BUSHING
1
2
3
4
5
6
7
8
1
1
1
1
2
2
4
4
2
2
4
4
4
1
1
1
2
2
2
9
10
11
12
13
14
15
16
17
18
19
SE4 (Oct-04) S/N 16874 -Current Rev 09-05
©2007 Alamo Group Inc.
Parts Section – 14
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY DECAL SHEETS
ITEM
PART NO.
QTY.
DESCRIPTION
1
2
3
00776481
00773310
2738332
1
1
2
SHEET,MANUALCANISTER DECAL
KIT, DECAL SHEET SE-4
DECAL, RED OBLONG REFLECTOR (NOT SHOWN)
SE4 (Oct-04) S/N 16874 -Current Rev 09-05
©2007 Alamo Group Inc.
Parts Section – 15
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
SERVIS-RHINO
LIMITED WARRANTY
1. LIMITED WARRANTIES
1.01.Servis-Rhino warrants for one year from the purchase date to the original non-commercial, governmental, or municipal
purchaser (“Purchaser”) and warrants for six months to the original commercial or industrial purchaser (“Purchaser”)
that the goods purchased are free from defects in material or workmanship.
1.02.Manufacturer will replace for the Purchaser any part or parts found, upon examination at one of its factories, to be
defective under normal use and service due to defects in material or workmanship.
1.03.This limited warranty does not apply to any part of the goods which has been subjected to improper or abnormal use,
negligence, alteration, modification, or accident, damaged due to lack of maintenance or use of wrong fuel, oil, or
lubricants, or which has served its normal life. This limited warranty does not apply to any part of any internal
combustion engine, or expendable items such as blades, shields, guards, or pneumatic tires except as specifically found
in your Operator’s Manual.
1.04.Except as provided herein, no employee, agent, Dealer, or other person is authorized to give any warranties of any
nature on behalf of Manufacturer.
2. REMEDIES AND PROCEDURES.
2.01.This limited warranty is not effective unless the Purchaser returns the Registration and Warranty Form to Manufacturer
within 30 days of purchase.
2.02.Purchaser claims must be made in writing to the Authorized Dealer (“Dealer”) from whom Purchaser purchased the
goods or an approved Authorized Dealer (“Dealer”) within 30 days after Purchaser learns of the facts on which the
claim is based.
2.03.Purchaser is responsible for returning the goods in question to the Dealer.
2.04.If after examining the goods and/or parts in question, Manufacturer finds them to be defective under normal use and
service due to defects in material or workmanship, Manufacturer will:
(a) Repair or replace the defective goods or part(s) or
(b) Reimburse Purchaser for the cost of the part(s) and reasonable labor charges (as determined by Manufacturer)
if Purchaser paid for the repair and/or replacement prior to the final determination of applicability of the warranty
by Manufacturer.
The choice of remedy shall belong to Manufacturer.
2.05.Purchaser is responsible for any labor charges exceeding a reasonable amount as determined by Manufacturer and
for returning the goods to the Dealer, whether or not the claim is approved. Purchaser is responsible for the trans-
portation cost for the goods or part(s) from the Dealer to the designated factory.
3. LIMITATION OF LIABILITY.
3.01.MANUFACTURER DISCLAIMS ANY EXPRESS (EXCEPT AS SET FORTH HEREIN) AND IMPLIED WARRANTIES
WITH RESPECT TO THE GOODS INCLUDING, BUT NOT LIMITED TO, MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE.
3.02.MANUFACTURER MAKES NO WARRANTY AS TO THE DESIGN, CAPABILITY, CAPACITY, OR SUITABILITY FOR
USE OF THE GOODS.
3.03.EXCEPT AS PROVIDED HEREIN, MANUFACTURER SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO
PURCHASER OR ANY OTHER PERSON OR ENTITY WITH RESPECT TO ANY LIABILITY, LOSS, OR DAMAGE
CAUSED OR ALLEGED TO BE CAUSED DIRECTLY OR INDIRECTLY BY THE GOODS INCLUDING, BUT NOT
LIMITED TO, ANY INDIRECT, SPECIAL, CONSEQUENTIAL, OR INCIDENTAL DAMAGES RESULTING FROM
THE USE OR OPERATION OF THE GOODS OR ANY BREACH OF THIS WARRANTY. NOT WITHSTANDING THE
ABOVE LIMITATIONS AND WARRANTIES, MANUFACTURER’S LIABILITY HEREUNDER FOR DAMAGES
INCURRED BY PURCHASER OR OTHERS SHALL NOT EXCEED THE PRICE OF THE GOODS.
3.04.NO ACTION ARISING OUT OF ANY CLAIMED BREACH OF THIS WARRANTY OR TRANSACTIONS UNDER
THIS WARRANTY MAY BE BROUGHT MORE THAN TWO (2) YEARS AFTER THE CAUSE OF ACTION HAS
OCCURRED.
4. MISCELLANEOUS.
4.01.Proper Venue for any lawsuits arising from or related to this limited warranty shall be only in Guadalupe County,
Texas.
4.02.Manufacturer may waive compliance with any of the terms of this limited warranty, but no waiver of any terms shall
be deemed to be a waiver of any other term.
4.03.If any provision of this limited warranty shall violate any applicable law and is held to be unenforceable, then the
invalidity of such provision shall not invalidate any other provisions herein.
4.04.Applicable law may provide rights and benefits to purchaser in addition to those provided herein.
KEEP FOR YOUR RECORDS
ATTENTION: Purchaser should fill in the blanks below for his reference when buying repair parts and/or for proper machine
identification when applying for warranty.
Servis-Rhino Implement Model _______________________________ Serial Number ________________________________
Date Purchased __________________________________________ Dealer ______________________________________
RHINO®
ATTENTION:
READ YOUR OPERATOR'S MANUAL
1020 S. SangamonAve.
Gibson City, IL60936
R
800-446-5158
Email: [email protected]
Download from Www.Somanuals.com. All Manuals Search And Download.
TO THE OWNER/OPERATOR/DEALER
Tokeepyourimplementrunningefficientlyandsafely,readyourmanualthoroughlyandfollowthesedirectionsand
the Safety Messages in this Manual. The Table of Contents clearly identifies each section where you can easily
find the information you need.
The OCCUPATIONAL SAFETY AND HEALTH ACT (1928.51 Subpart C) makes these minimum safety
requirementsoftractoroperators:
REQUIREDOFTHEOWNER:
1. Provide a Roll-Over-Protective Structure that meets the requirements of this Standard; and
2. Provide Seatbelts that meet the requirements of this paragraph of this Standard and SAE J4C; and
3. Ensure that each employee uses such Seatbelt while the tractor is moving; and
4. Ensure that each employee tightens the Seatbelt sufficiently to confine the employee to the protected
area provided by the ROPS.
REQUIREDOFTHEOPERATOR
1. Securely fasten seatbelt if the tractor has a ROPS.
2. Where possible, avoid operating the tractor near ditches, embankments, and holes.
3. Reduce speed when turning, crossing slopes, and on rough, slick, or muddy surfaces.
4. Stay off slopes too steep for safe operation.
5. Watch where you are going - especially at row ends, on roads, and around trees.
6. Do not permit others to ride.
7. Operate the tractor smoothly - no jerky turns, starts, or stops.
8. Hitch only to the drawbar and hitch points recommended by the tractor manufacturer.
9. When the tractor is stopped, set brakes securely and use park lock, if available.
Keep children away from danger all day, every day...
Equip tractors with rollover protection (ROPS) and keep all machinery
guards in place...
Please work, drive, play and live each day with care and concern for
your safety and that of your family and fellow citizens.
Download from Www.Somanuals.com. All Manuals Search And Download.
SE4 PL 10/04
Printed U.S.A.
P/N 00760866P
Download from Www.Somanuals.com. All Manuals Search And Download.
|