FS15
FLEX-WING
ROTARY CUTTER
P/N 00773425MB
Published 07-05
MASTER PARTS BOOK
S/N 00101 TO 10429
PARTSLISTING
Rhino®
An Alamo Group Company
1020 S. SangamonAve.
Gibson City, Il 60936
1-800-446-5158
Email: [email protected]
© 2005Alamo Group Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
PARTS
SECTION
Parts Section – 1
Download from Www.Somanuals.com. All Manuals Search And Download.
PARTS ORDERING GUIDE
Thefollowinginstructionsareofferedtohelpeliminateneedlessdelayanderrorinprocessing
purchase orders for the equipment in this section.
1. The Parts Section is prepared in logical sequence and grouping of parts that belong to the
basic machine featured in this manual. Part Numbers and Descriptions are given to help
locate the parts and quantities required.
2. The Purchase Order must include the name and address of the person or organization
ordering the parts, who should be charged, and if possible, the serial number of the machine
for which the parts are ordered.
3. ThePurchaseOrdermustclearlylistthequantityofeachpart, thecompleteandcorrectpart
number (be sure to include all periods), and the basic name of the part.
4. The Manufacturer reserves the right to substitute parts where applicable.
5. Somepartsareunlisteditemswhicharespecialproductionitemsnotnormallystockedand
are subject to special handling. Request a quotation for such parts before sending a
PurchaseOrder.
6. The Manufacturer reserves the right to change prices without prior notice.
NOTE:
Please refer to The Safety Section in the front of this Manual for the proper
Part Number when ordering Replacement Safety Decals.
For maximum safety and to guarantee optimum product reliability, always use
genuine Servis-Rhino Parts. The use of inferior replacement parts may cause
premature or catastrophic failure which could result in serious injury or death.
Direct any questions regarding parts to:
®
RHINO
1020 S. Sangamon Ave.
Gibson City, IL 60936
800-446-5158
Email: [email protected]
Parts Section – 2
©2005 Alamo Group Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
PART NAME INDEX
AXLE ASSEMBLY - CTR & WING S/N 00101 - 10147 OCT 1977 - JAN 1988.................................................................... 5
AXLE ASSEMBLY - CTR & WING S/N 10148 - 10429 JAN 1988 - MAY 1988.................................................................... 6
BLADE BAR ASSEMBLY - CTR HEAVY DUTY S/N 01162 - 10429 DEC 1980 - MAY 1988.............................................. 7
BLADE BAR ASSEMBLY - CTR STANDARD S/N 00101 - 01162 OCT 1977 - DEC 1980 ................................................. 8
BLADE BAR ASSEMBLY - WING HEAVY DUTY S/N 01162 - 10429 DEC 1980 - MAY 1988 ........................................... 9
BLADE BAR ASSEMBLY - WING STANDARD S/N 01162 - 10429 OCT 1977 - DEC 1980............................................. 10
BLADE PAN ASSEMBLY - CTR HEAVY DUTY S/N 01162 - 10429 DEC 1980 - MAY 1988............................................ 11
BLADE PAN ASSEMBLY - CTR STANDARD S/N 00101 - 01162 OCT 1977 - DEC 1980 ............................................... 12
BLADE PAN ASSEMBLY - WING HEAVY DUTY S/N 01162 - 10429 DEC 1980 - MAY 1988 ......................................... 13
BLADE PAN ASSEMBLY - WING STANDARD S/N 00101 - 01162 OCT 1977 - DEC 1980............................................. 14
CHAIN GUARD - CENTER & WING SECTION S/N 01497 - 10429 JUN 1982 - MAY 1988 ............................................. 15
CHAIN GUARD - REAR CENTER SECTION S/N 01497 - 10429 JUN 1982 - MAY 1988................................................. 16
CHAIN GUARD - REAR WING SECTION S/N 01497 - 10429 JUN 1982 - MAY 1988...................................................... 17
CYLINDER ASSEMBLY - CENTER AXLE S/N 00101 - 01377 OCT 1977 - JAN 1982...................................................... 18
CYLINDER ASSEMBLY - CENTER AXLE S/N 00101 - 10429 OCT 1977 - MAY 1988..................................................... 19
CYLINDER ASSEMBLY - CENTER AXLE S/N 01376 - 10429 JAN 1982 - MAY 1988 ..................................................... 20
CYLINDER ASSEMBLY - LEVEL LIFT - 2-1/2 X 8 SLAVE CYL S/N 00101 - 10429 OCT 1977 - MAY 1988................... 21
CYLINDER ASSEMBLY - LEVEL LIFT - 2-3/4 X 8 SLAVE CYL S/N 00101 - 10429 OCT 1977 - MAY 1988................... 22
CYLINDER ASSEMBLY - LEVEL LIFT - 3 X 8 SLAVE CYL S/N 00101 - 10429 OCT 1977 - MAY 1988......................... 23
CYLINDER ASSEMBLY - LEVEL LIFT REPLACEMENT ASSY (P/N 8719) S/N 00101 - 10429 OCT 1977 - MA............ 24
CYLINDER ASSEMBLY - LEVEL LIFT REPLACEMENT ASSY (P/N 8720) S/N 00101 - 10429 OCT 1977 - MA............ 25
CYLINDER ASSEMBLY - LEVEL LIFT REPLACEMENT ASSY (P/N 8721) S/N 00101 - 10429 OCT 1977 - MA............ 26
CYLINDER ASSEMBLY - WING-HYDRAULIC CYLINDER & HOSE GROUP S/N 00101 - 01376 OCT 1977 - JAN ....... 27
CYLINDER ASSEMBLY - WING-LANTEX HYDRAULIC CYL & HOSE GRP S/N 01377 - 10429 JAN 1982 - MAY......... 28
CYLINDER ASSEMBLY - WING-REPLACEMENT S/N 00101 - 10429 OCT 1977 - MAY 1988........................................ 29
DECALS S/N 00101 - 10429 OCT 1977 - MAY 1988.......................................................................................................... 30
DEFLECTOR - REAR WING S/N 01497 - 10429 JUN 1982 - MAY 1988 .......................................................................... 31
DEFLECTOR - RUBBER FRONT CENTER S/N 00101 - 10429 OCT 1977 - MAY 1988 .................................................. 32
DEFLECTOR - RUBBER FRONT WING LEFT & RIGHT S/N 00101 - 10429 OCT 1977 - MAY 1988 ............................. 33
DEFLECTOR - RUBBER LEFT & RIGHT CENTER S/N 00101 - 10429 OCT 1977 - MAY 1988...................................... 34
DRIVELINE ASSEMBLY - CTR GEARBOX SQUARE SHAFT SLIP 35R S/N 00101 - 10429 OCT 1977 - MAY 19......... 35
DRIVELINE ASSEMBLY - OUTBOARD SQUARE SHAFT ASSEMBLY 35R S/N 00101 - 10429 OCT 1977 - MAY 1..... 36
DRIVELINE ASSEMBLY - PTO SQUARE SHAFT ASSEMBLY 44R S/N 00101 - 10429 OCT 1977 - MAY 1988............ 37
DRIVELINE ASSEMBLY - SHIELDING ASSEMBLY SQUARE SHAFTS S/N 00101 - 10429 OCT 1977 - MAY 198 ....... 38
GEARBOX ASSEMBLY - CENTER SECTION S/N 00101 - 10429 OCT 1977 - MAY 1988 .............................................. 40
GEARBOX ASSEMBLY - DIVIDER (COMER) S/N 01901 - 10429 FEB 1985 - MAY 1988 ............................................... 42
GEARBOX ASSEMBLY - DIVIDER S/N 00101 - 01900 OCT 1977 - FEB 1985 ................................................................ 44
GEARBOX ASSEMBLY - LEFT WING S/N 00101 - 10429 OCT 1977 - MAY 1988 .......................................................... 46
GEARBOX ASSEMBLY - RIGHT WING S/N 00101 - 10429 OCT 1977 - MAY 1988........................................................ 48
GEARBOX ATTACHMENT - DIVIDER & CENTER GEARBOX S/N 00101 - 10429 OCT 1977 - MAY 1988.................... 50
GEARBOX ATTACHMENT- RIGHT & LEFT WING GEARBOX S/N 00101 - 10429 OCT 1977 - MAY 1988 ................... 51
HOSE BRACKET COMPONENTS S/N 00101 - 10429 OCT 1977 - MAY 1988................................................................. 52
HUB ASSEMBLY - CENTER & OUTBOARD S/N 10148 - 10428 JAN 1988 - MAY 1988 ................................................. 53
HUB ASSEMBLY - OUTBOARD AXLES S/N 00101 - 10147 OCT 1977 - JAN 1988 ........................................................ 54
HUB ASSEMBLY - STANDARD CENTER AXLE S/N 00101 - 10147 OCT 1977 - JAN 1988 ........................................... 55
HYDRAULIC CONTROL VALVE MOUNTING KIT S/N 00101 - 10429 OCT 1977 - MAY 1988 ........................................ 56
HYDRAULIC HOSE ADAPTERS S/N 00101 - 10429 OCT 1977 - MAY 1988 ................................................................... 57
HYDRAULIC VALVE ASSEMBLY - DETENT W/SPRING ASSEMBLY S/N 00101 - 10429 OCT 1977 - MAY 1988........ 58
HYDRAULIC VALVE ASSEMBLY - OPEN/CLOSED CENTER VALVE S/N 00101 - 10429 OCT 1977 - MAY 1988........ 59
JACK ASSEMBLY - TOP WING S/N 00101 - 10429 OCT 1977 - MAY 1988 .................................................................... 60
LEFT SCREW S/N 00101 - 10429 OCT 1977 - MAY 1988................................................................................................. 61
LEVEL LIFT KIT FIELD INSTALLATION S/N 00101 - 10429 OCT 1977 - MAY 1988 ....................................................... 62
LEVEL LIFT ROD ASSEMBLY S/N 10148 - 10428 JAN 1988 - MAY 1988 ....................................................................... 63
MAINFRAME ASSEMBLY S/N 00101 - 01900 OCT 1977 - FEB 1985............................................................................... 64
MAINFRAME ASSEMBLY S/N 01901 - 10429 FEB 1985 - MAY 1988 .............................................................................. 65
NOTES.................................................................................................................................................................................. 39
SIDE SHOE & SIDE SKIRT - OFFSET MODELS CTR SECTION S/N 00101 - 10429 OCT 1977 - MAY 1988................ 66
SIDE SHOE & SIDE SKIRT S/N 00101 - 10429 OCT 1977 - MAY 1988 ........................................................................... 67
SKID SHOE ASSEMBLY S/N 00101 - 00466 OCT 1977 - FEB 1979 ................................................................................ 68
SKID SHOE ASSEMBLY S/N 00101 - 10429 OCT 1977 - MAY 1988................................................................................ 69
SPRING ASSEMBLY - CENTER AXLE S/N 00101 - 10429 OCT 1977 - MAY 1988......................................................... 70
SPRING ASSEMBLY - WING S/N 00101 - 10429 OCT 1977 - MAY 1988 ........................................................................ 71
TIRE/WHEEL ASSEMBLY S/N 00101 - 10429 OCT 1977 - MAY 1988 ............................................................................. 72
FS15 Master Parts Book (July-05)
©2005 Alamo Group Inc.
Parts Section – 3
Download from Www.Somanuals.com. All Manuals Search And Download.
PART NAME INDEX
TONGUE ASSEMBLY S/N 00101 - 10429 OCT 1977 - MAY 1988.................................................................................... 73
TORQUE LIMITER ASSEMBLY S/N 00101 - 10001 OCT 1977 - AUG 1987..................................................................... 74
TORQUE LIMITER ASSEMBLY S/N 10001 - 10429 AUG 1987 - MAY 1988 .................................................................... 75
WEIGHT BOX S/N 00101 - 10429 OCT 1977 - MAY 1988................................................................................................. 76
WINCH AND STAND ASSSEMBLY S/N 00101 - 10429 OCT 1977 - MAY 1988............................................................... 77
FS15 Master Parts Book (July-05)
©2005 Alamo Group Inc.
Parts Section – 4
Download from Www.Somanuals.com. All Manuals Search And Download.
AXLE ASSEMBLY - CTR & WING S/N 00101 - 10147 OCT 1977 - JAN 1988
ITEM
PART NO.
QTY.
DESCRIPTION
1
5
6
0656060100
0656280100
0656070110
0656070100
0656070210
0656070200
20BH5012
15B1600
65106A4
D121
D301
0652140220
0652140210
0652140260
0652140250
1
1
1
1
1
1
4
4
4
1
1
1
15
1
1
CENTER AXLE WELD NOT SHOWN
DOUBLE AXLE WELD SHOWN
AXLE WLD R.H. ONLY
AXLE ASSY
AXLE WLD L.H. ONLY
AXLE ASSY
PIN-SPIRAL 5/16 X 1 1/2 *
WASHER 1 SAE P *
WLDMT,AXLE PIVOT PIN *
DECAL ADJ-NUTS
DECAL,RHINO
WLDMT, AXLE ARM - LEFT **
LEFT AXLE ASSY **
WLDMT, AXLE ARM - RIGHT
RIGHT AXLE ASSY **
7
8
9
10
11
15
16
Note: This Axle uses hub #3741247 assembly on center and hub #271033 assembly on wing. Washers are welded to
spindle on center axle but not on the wing.
FOR REPLACEMENT PARTS ONLY
*QTY SHOWN FOR 1 MACHINE, COMPLETE
**USED W/FACTORY LEVEL LIFT ONLY ITEM #15 AND #16
FS15 Master Parts Book (July-05)
©2005 Alamo Group Inc.
Parts Section – 5
Download from Www.Somanuals.com. All Manuals Search And Download.
AXLE ASSEMBLY - CTR & WING S/N 10148 - 10429 JAN 1988 - MAY 1988
ITEM
PART NO.
QTY.
DESCRIPTION
1
00756458
00756456
00756461
00756464
00756455
00756457
00756459
00756462
20BH5012
15B1600
65106A4
D121
1
1
1
1
1
1
1
1
4
4
4
1
1
1
1
1
1
AXLE CENTER ASSY NOT SHOWN
AXLE DOUBLE CENTER SHOWN
AXLE ARM ASSY (R.H.), COMPLETE W/1 HUB
AXLE ARM ASSY(L.H.), COMPLETE W/1 HUB
DOUBLE AXLE ARM WELD SHOWN
CENTER AXLE WELD NOT SHOWN
AXLE WELD (R.H.) ONLY
AXLE WELD (L.H.) ONLY
PIN-SPIRAL 5/16 X 1 1/2 *
WASHER 1 SAE P *
WLDMT,AXLE PIVOT PIN *
DECAL ADJ-NUTS
DECAL,RHINO
LEFT AXLE ARM ASSY
RIGHT AXLE ARM ASSY
LEFT AXLE ARM WELD N/S
RIGHT AXLE ARM WELD
2
3
4
5
6
7
8
9
10
11
12
13
15
16
D301
00756466
00756468
00756465
00756467
Note: This axle center & win uses hub #00757241 assembly.
FOR REPLACEMENT PARTS ONLY.
*QTY SHOWN FOR 1 MACHINE, COMPLETE
**USED W/FACTORY HYDRAULIC LEVEL LIFT ONLY ITEM #12 THRU #16
FS15 Master Parts Book (July-05)
©2005 Alamo Group Inc.
Parts Section – 6
Download from Www.Somanuals.com. All Manuals Search And Download.
BLADE BAR ASSEMBLY - CTR HEAVY DUTY S/N 01162 - 10429 DEC 1980 - MAY 1988
ITEM
PART NO.
QTY.
DESCRIPTION
1
2
3
4
5
6
7
0656160100
0652010030
571044
1
2
2
2
2
2
2
WLDMT, BLADE CARRIER
BLADE, CCW/CW FLAT
BOLT SHOULDER
WASHER
LOCKNUT 1 -14 LH TLN PL
BLADE, CCW FAN
571045
5GL16140
0622010330
0656150200
WASHER,SQ HOLE HT
Note: This carrier was optional until Dec. 1980 then, it became standard. These blade bolts have square shoulders.
The blade bolt hole is 1-25/64 diameter. Check Before Ordering Parts
FS15 Master Parts Book (July-05)
©2005 Alamo Group Inc.
Parts Section – 7
Download from Www.Somanuals.com. All Manuals Search And Download.
BLADE BAR ASSEMBLY - CTR STANDARD S/N 00101 - 01162 OCT 1977 - DEC 1980
ITEM
PART NO.
QTY.
DESCRIPTION
1
2
3
4
5
6
701021R
701022R
36107A2ALH
481043
5GL12160
71103
1
2
2
2
2
2
CARRIER,BAR BLADE
BLADE
BOLT SHOULDER L.H THREAD
SPCR 1-1/4 X 3/4 X 5/16
LOCKNUT TLM 3/4 NF PLB L.H. THREAD
BLD,OFT/FAN,CCW
Note: This blade carrier was standard till Dec. 1980. These Blade bolts have round shoulder.
The blade bolt hole is 1-1/64 dia. Check Before Ordering Parts
FS15 Master Parts Book (July-05)
©2005 Alamo Group Inc.
Parts Section – 8
Download from Www.Somanuals.com. All Manuals Search And Download.
BLADE BAR ASSEMBLY - WING HEAVY DUTY S/N 01162 - 10429 DEC 1980 - MAY 1988
ITEM
PART NO.
QTY.
DESCRIPTION
1
2
3
0656180100
0652010030
0622010330
0652010330
571044
571045
5GL16140
0656150200
1
2
2
3
2
2
2
2
WLDMT, BLADE CARRIER, FS15
BLADE, CCW/CW FLAT
BLADE, CCW FAN
BLADE, CW FAN
BOLT SHOULDER
WASHER
LOCKNUT 1 -14 LH TLN PL
WASHER,SQ HOLE HT
4
5
6
7
Note: This was optional till Dec. 1980. These blades bolts have square shoulders.
The blade bolt hole is 1-25/64 dia. Check Before Ordering Parts
FS15 Master Parts Book (July-05)
©2005 Alamo Group Inc.
Parts Section – 9
Download from Www.Somanuals.com. All Manuals Search And Download.
BLADE BAR ASSEMBLY - WING STANDARD S/N 01162 - 10429 OCT 1977 - DEC 1980
ITEM
PART NO.
QTY.
DESCRIPTION
1
2
711021
1
2
2
2
2
2
2
BLADE CARRIER
BLADE
BLADE STD FAN
BLD,OFT/FAN,CCW
BOLT SHOULDER
WASHER (SPECIAL)
LOCKNUT TLM (LH) 3/4 NF PLB
701022R
0656240000
71103
36107A2ALH
5312316
3
4
5
6
5GL12160
Note: This blade carrier was optional till Dec. 1980.
The blade bolt hole is 1-1/64 dia. Check Before Ordering Parts
FS15 Master Parts Book (July-05)
©2005 Alamo Group Inc.
Parts Section – 10
Download from Www.Somanuals.com. All Manuals Search And Download.
BLADE PAN ASSEMBLY - CTR HEAVY DUTY S/N 01162 - 10429 DEC 1980 - MAY 1988
ITEM
PART NO.
QTY.
DESCRIPTION
1
2
3
0656150100
701332
0652010030
0652010030
0622010330
571044
7AH5101816
0656150200
571045
1
1
2
3
2
2
4
2
2
4
4
2
BALDE CARRIER WELDMENT
DISHPAN
OFFSET FLAT BLADE
HARD SURFACED OFFSET FLAT BLADE
OFFSET FAN BLADE
OFFSET HARD SURFACED FAN BLADE
BOLT
SPACER WASHER
SHOULDER BOLT
HARD WASHER
LOCKNUT
4
5
6
7
8
9
10
11
W67
00749136
5GL1640
LOCKNUT L.H. THREAD
Note: This carrier was optional until Dec. 1980 then, it became standard. These blade bolts have square shoulders.
The blade bolt hole is 1-25/64 diameter. Check Before Ordering Parts
FS15 Master Parts Book (July-05)
©2005 Alamo Group Inc.
Parts Section – 11
Download from Www.Somanuals.com. All Manuals Search And Download.
BLADE PAN ASSEMBLY - CTR STANDARD S/N 00101 - 01162 OCT 1977 - DEC 1980
ITEM
PART NO.
QTY.
DESCRIPTION
1
2
3
4
701333
701332
1
1
2
2
2
2
4
2
2
4
4
2
CARRIER BLADE WELDMENT
DISHPAN
BLADE, OFFSET FLAT
BLADE, OFFSET FAN
BLADE OFFSET FAN (HARD SURFACED)
SHOULDER BLADE BOLT
BOLT
701022R
71103
HS71103
36107A2ALH
7AH5101816
671044
681064
W67
5GR10180
5GL12160
5
6
7
8
9
10
11
SPACER WASHER
WASHER (HARDENED)
WASHER (HARDENED)
NUT-TOPLOCK
NUT-TOPLOCK LH THREAD
Note: This blade carrier was standard till Dec. 1980. These Blade bolts have round shoulder.
The blade bolt hole is 1-1/64 dia. Check Before Ordering Parts
FS15 Master Parts Book (July-05)
©2005 Alamo Group Inc.
Parts Section – 12
Download from Www.Somanuals.com. All Manuals Search And Download.
BLADE PAN ASSEMBLY - WING HEAVY DUTY S/N 01162 - 10429 DEC 1980 - MAY 1988
ITEM
PART NO.
QTY.
DESCRIPTION
1
2
3
0656170100
671042
1
1
2
3
2
3
2
4
2
2
2
2
4
4
4
2
2
BLADE CARRIER, WELDMENT
BLADE PAN
0652010030
0652010030
0652010030
0652010030
0622010330
0622010330
0652010330
0652010330
571044
571045
7AH5101816
W67
00749136
5GL16140
0656150200
OFFSET FLAT BLADE, CCW
OFFSET FLAT BLADE, HARD SURFACED, CCW
OFFSET FLAT BLADE, CW
OFFSET FLAT BLADE, HARD SURFACED, CW
OFFSET FAN BLADE, CCW
OFFSET FAN BLADE, HARD SURFACED, CCW
OFFSET FAN BLADE, CW
FAN, BLADE HARD SURFACED, CW
SHOULDER BOLT (L.H. THREADS)
SHOULDER BOLT WASHER
BOLT
4
5
6
7
8
9
10
11
WASHER
LOCKNUT
LOCKNUT L.H. THREADS
WASHER SPACER
Note: This was optional till Dec. 1980. These blades bolts have square shoulders.
The blade bolt hole is 1-25/64 dia. Check Before Ordering Parts
FS15 Master Parts Book (July-05)
©2005 Alamo Group Inc.
Parts Section – 13
Download from Www.Somanuals.com. All Manuals Search And Download.
BLADE PAN ASSEMBLY - WING STANDARD S/N 00101 - 01162 OCT 1977 - DEC 1980
ITEM
PART NO.
QTY.
DESCRIPTION
1
2
3
671041
671042
1
1
2
2
2
2
2
2
2
2
2
4
4
4
2
2
CARRIER, BLADE (WELDMENT)
BLADE PAN
BLADE, OFFSET, CCW
BLADE, OFFSET, CW (HARD SURFACE)
BLADE, OFFSET, CW
BLADE, SUCTION, CCW
BLADE, SUCTION, CW
BLADE, SUCTION, HARD SURFACED, CCW
BLADE, SUCTION, HARD SURFACED, CW
BOLT, SHOULDER L.H. THD.
WASHER, SPECIAL (HEAT TREATED)
BOLT
701022R
0656240000
0656240000
71103
0656240000
71103
0656240000
36107A2ALH
5312316
7AH5101816
W67
00749136
5GI12160
671044
4
5
6
7
8
9
10
11
WASHER, HARD
NUT, LOCK HEX.
NUT, LOCK HEX.
WASHER, SPACER
Note: This blade carrier was optional till Dec. 1980.
The blade bolt hole is 1-1/64 dia. Check Before Ordering Parts
FS15 Master Parts Book (July-05)
©2005 Alamo Group Inc.
Parts Section – 14
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAIN GUARD - CENTER & WING SECTION S/N 01497 - 10429 JUN 1982 - MAY 1988
ITEM
PART NO.
QTY.
DESCRIPTION
0652100000
0652100100
0652100200
0652100110
0652100201
0652100101
0652100203
0652100202
0652100104
0652100102
0652100105
7A81312
-
CHAIN GUARDS, FRONT
CTR SECT FRNT CHN GD ASSY
FRNT CHN GD ASSY, WING *
WLDMT, MOUNTING BRACKET
GUARD MNTING BRKT *
CHAIN 5/16 5-LINKS
CHAIN 5/16, 6 LINK *
ROD CHAIN *
ROD CHAIN
ROD CHAIN
ROD CHAIN
C/S1/2 X 1 1/2 NC
(WING) *
1
2
3
4
5
1
1
1
1
69
63
1
2
1
2
7
5
2
7
7
7
7
6
7
8
9
10
11
12
00013300
15B800
HEXB 1/2 NC 2 PL5 *
WASHER 1/2 SAE ZP
(WING) *
NUT,LOCKNUT 1/2 NC
(WING) *
13
5GR8130
Note: These replace assembly used prior to Serial #07497 June 1982. Chain Guards with chain links welded on longer
available.
Leading edge of mower will be turned down 90` approximately.
FS15 Master Parts Book (July-05)
©2005 Alamo Group Inc.
Parts Section – 15
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAIN GUARD - REAR CENTER SECTION S/N 01497 - 10429 JUN 1982 - MAY 1988
ITEM
PART NO.
QTY.
DESCRIPTION
0652110000
0652110100
0652110101
0652100203
0652110102
00748823
00752680
15B800
-
CHAIN GUARDS, REAR *
REAR CHN GD ASSY, CTR SECT
MOUNTING BRACKET
1
1
57
1
4
2
6
6
2
2
1
2
3
4
CHAIN 5/16, 6 LINK
ROD,CHAIN GUARD 52 1/2 LG
HHCS 1/2-13UNC 1-1/2 PL5
HHCS 1/2-13UNC X 4LG PL5
WASHER 1/2 SAE ZP
LOCKNUT TLM 1/2 NC PLB
ROD,CHAIN GUARD 11 1/2 LG
SPACER
5
6
7
?8
00001800
0652110103
652053
Note: These chain guards as an assembly replace earlier chain guards prior to serial #01497 June 1982. Chain guards
with chain links welded on bracket are no longer available.
FS15 Master Parts Book (July-05)
©2005 Alamo Group Inc.
Parts Section – 16
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAIN GUARD - REAR WING SECTION S/N 01497 - 10429 JUN 1982 - MAY 1988
ITEM
PART NO.
QTY.
DESCRIPTION
1
2
0652110300
0652110200
0652110210
0652110310
00751126
0652110201
00013300
652053
1
1
1
2
110
2
2
LEFT REAR WING CHN GD
RT REAR CHN GD ASSY
MOUNTING BRKT, RIGHT
MOUNTING BRKT, LEFT
CHAIN 5/16 WLD 6 LINK
ROD CHAIN
3
4
5
9
HEXB 1/2 NC 2 PL5
SPACER
8
10
12
00752680
7A81336
6
2
HHCS 1/2-13UNC X 4LG PL5
C/S1/2 X 4-1/2 NC PL5
Complete Rear Chain Guard Assembly to include center, left and right wing. See Center Chain Guard Section. These are
the same for all previous serial #’s listed without modification. Chain Guards with welded on links are no longer available.
FS15 Master Parts Book (July-05)
©2005 Alamo Group Inc.
Parts Section – 17
Download from Www.Somanuals.com. All Manuals Search And Download.
CYLINDER ASSEMBLY - CENTER AXLE S/N 00101 - 01377 OCT 1977 - JAN 1982
ITEM
PART NO.
QTY.
DESCRIPTION
1
65113B1
00759946
00755234
651302
94514
691354
65113A3
65113B6
651136
65113B8
65113A8
65113A9
651139
6511310
691315
6511311
65113A12
0651130001
8354
37107B13
65113A16
0651130017
6511320
00001200
00999316
6511322
00013901
6511324
00749508
2717100
6511325A
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
4
4
1
1
4
1
1
1
1
-
CYLINDER
CYLINDER 3 X 8 W/1-1/4 ROD
CONTROL SPACER KIT
HOSE #6 - 8 MP - 8 MP 180 LG
ADAPTER, HYD, ELBOW SWIVEL
CLEVIS 1 1/4-12 NF THD
CLEVIS 1/16-12 NF THD
COLLAR
2
3
4
7
COLLAR
9
HEAD 1 1/4 ROD 3 BR
HEAD 1 1/16 ROD 3 BR
ROD 1 1/4
ROD, 1-1/16 DIA.,3/4NF THDS.
TUBE CENTER CYL
PISTON, 3, O RING SEAL
PISTON, 3, UCUP SEAL
CLEVIS BASE 1/2
CLEVIS BASE 7/16
PIN-HYD. CYLINDER
CLIP-X HAIR PIN
TIE ROD 1/2 - 13
TIE ROD
NUT, PISTON (3/4-NF HEX)
NUT,HEX 1/2 NC PL
NUT HEX 7/16 NC PL
BOLT
NUT HEX 3/8 NC PL
BREATHER,1/2 SQ HD CORED
PLUG 1/2-14 NPT
10
11
12
13
14
15
16
17
18
19
20
21
22
SEAL KIT 1 1/4
SEAL KIT,3 CROSS CYLINDER 1 1/16
-
Note: This cylinder was used approx. through 1982. Always check length of barrel, type of stroke control, size and rod
(Item #10), size of tie rods. (Item #16) before ordering parts. Replacement part # for complete assembly is 00759946 and
the stroke control spacer kit is 00755234. This cylind
FS15 Master Parts Book (July-05)
©2005 Alamo Group Inc.
Parts Section – 18
Download from Www.Somanuals.com. All Manuals Search And Download.
CYLINDER ASSEMBLY - CENTER AXLE S/N 00101 - 10429 OCT 1977 - MAY 1988
ITEM
PART NO.
QTY.
DESCRIPTION
00759946
8354
163016
00760199
4675M
7339
00023100
00760661
00760194
00760200
4376
4690W
00760197
8754
CYLINDER 3 X 8 W/1-1/4 ROD
PIN-HYD. CYLINDER
PIN, COTTER 3/16 X 2
SEAL KIT (3 DIA HYD CYL)
NUT PISTON
BREATHER, CYLINDER
HHCS 3/8 -16UNC 1-1/2 PL5
PISTON FOR 3BORE CYL
TUBE, CYL 3X8
1
2
3
4
5
6
7
8
2
2
1
1
1
1
1
1
1
1
8
1
1
1
4
1
9
PISTON ROD
10
11
12
13
14
15
19
NUT HEX 1/2-20 NF PL
INSTALL SHEET-BELT TENSIONER&S
HEAD, CYL 3
CLEVIS,OUTER
BASE, CYL 3
ROD,CYL TIE (1/2NFX13)3X8 CYL
CONTROL SPACER KIT
SEAL KIT (3 DIA HYD CYL)
00760196
00760202
00755234
00760199
REPLACEMENT PARTS ONLY
Replacement cylinder not used in production. Used as replacement assembly. Parts WILL NOT interchange with earlier
cylinder.
Note: No screw on stroke control - use clip on spacers. (Item # 19)
Seal Kit # 00760199 contains both old and new style piston seals. New style seal can be installed in old style piston.
FS15 Master Parts Book (July-05)
©2005 Alamo Group Inc.
Parts Section – 19
Download from Www.Somanuals.com. All Manuals Search And Download.
CYLINDER ASSEMBLY - CENTER AXLE S/N 01376 - 10429 JAN 1982 - MAY 1988
ITEM
PART NO.
QTY.
DESCRIPTION
1
2
3
4
5
6
7
8
65113B1
651302
94514
0651130001
0651130005
0651130006
0651130007
00750208
0651130012
5B6240
1
1
1
1
1
1
1
1
1
1
1
8
1
4
1
2
4
1
-
CYLINDER
HOSE #6 - 8 MP - 8 MP 180 LG
ADAPTER, HYD, ELBOW SWIVEL
CLEVIS BASE
PISTON
ROD
BARREL
PLUG,BREATHER 1/2 NPTM - 007
STROKE CONTROL
NUT,ROD CLEVIS
SHCS 3/8 NF 1-3/4
NUT 1/2 NF HEX
HEAD 3 HYD CYL 1-1/4 ROD
TIE ROD
9
10
11
12
13
14
15
16
17
18
7E62414
02816800
0651130016
0651130017
691351
NUT
8354
PIN-HYD. CYLINDER
PIN-COTTER 1/8 X 1-1/2 PLATED
CLEVIS 1-14 NF THD
SEAL KIT,3 LANTEX CYLINDER
00000400
0651130022
0651130014
Note: This cylinder was used approx. after 1982. Always check length of barrel, and type of stroke control before ordering
part. Replacement part # for complete cylinder assy is 00759946, and stroke control spacer kit is 00755234. Parts Will
Not Interchange.
This is an lantex cylinder length of barrel (Item #7) is 10 1/8" long. Stroke control (Item #9) is round with notches cast into
it.
FS15 Master Parts Book (July-05)
©2005 Alamo Group Inc.
Parts Section – 20
Download from Www.Somanuals.com. All Manuals Search And Download.
CYLINDER ASSEMBLY - LEVEL LIFT - 2-1/2 X 8 SLAVE CYL S/N 00101 - 10429 OCT 1977 - MAY 1988
ITEM
PART NO.
QTY.
DESCRIPTION
0652141500
0652141501
0652141312
0652141502
0652141503
0652141504
5JRC10180
0652140305
0652141506
0652140307
691356
37107B13
0652141311
691302
B651302
6513015
-
CLY, LEVEL LIFT
PISTON ROD
PLUG, STRAIGHT ADAPTER
TUBE
HEAD
1
2
3
4
5
6
7
8
1
1
1
1
1
1
4
1
1
2
4
2
1
1
1
1
6
PISTON
NUT TOPLOCK 5/8 NF PLC
TIEROD,HYD CYL W/NUT
CLEVIS,BASE
CLEVIS, ROD
PIN
9
10
11
12
13
14
15
16
17
CLIP-X HAIR PIN
ADP HYD STGHT 8MB - 8FP
HYD HOSE-3/8-8W/ 1/2 FITTING (NOT SHOWN)
HOSE #6 - 8MP - 8MP - 180LG (NOT SHOWN)
HOSE #6 - 8 MP - 8 MP 216 LG (NOT SHOWN)
HYD HOSE ONE (NOT SHOWN)
ADAPTER, HYD, ELBOW SWIVEL (NOT SHOWN)
B65113A2
94514
FS15 Master Parts Book (July-05)
©2005 Alamo Group Inc.
Parts Section – 21
Download from Www.Somanuals.com. All Manuals Search And Download.
CYLINDER ASSEMBLY - LEVEL LIFT - 2-3/4 X 8 SLAVE CYL S/N 00101 - 10429 OCT 1977 - MAY 1988
ITEM
PART NO.
QTY.
DESCRIPTION
0652141400
0652141401
0652141312
0652141402
0652141403
0652141404
5JRC12100
0652140305
0652141406
0652140307
691356
37107B13
0652141311
691302
B651302
6513015
-
HYD CYL KIT
ROD,PISTON
PLUG, STRAIGHT ADAPTER
TUBE HYD CYL
GLAND,ROD END
PISTON
NUT TOPLOCK 3/4
TIEROD,HYD CYL W/NUT
CLEVIS,BASE
CLEVIS, ROD
1
2
3
4
5
6
7
8
1
1
1
1
1
1
4
1
1
2
4
2
1
1
1
1
6
9
10
11
12
13
14
15
16
17
PIN
CLIP-X HAIR PIN
ADP HYD STGHT 8MB - 8FP
HYD HOSE-3/8-8W/(1/2FITTING (NOT SHOWN)
HOSE #6 - 8MP - 8MP - 180LG (NOT SHOWN)
HOSE #6 - 8 MP - 8 MP 216 LG (NOT SHOWN)
HYD HOSE ONE (NOT SHOWN)
ADAPTER, HYD, ELBOW SWIVEL (NOT SHOWN)
B65113A2
94514
FS15 Master Parts Book (July-05)
©2005 Alamo Group Inc.
Parts Section – 22
Download from Www.Somanuals.com. All Manuals Search And Download.
CYLINDER ASSEMBLY - LEVEL LIFT - 3 X 8 SLAVE CYL S/N 00101 - 10429 OCT 1977 - MAY 1988
ITEM
PART NO.
QTY.
DESCRIPTION
0652141300
0652141301
0652141312
0652141302
0652141303
0652141304
6511320
0652140305
0652141306
0652140307
691356
37107B13
691302
B651302
6513015
B65113A2
94514
-
HYD CYL KIT
PISTON ROD
PLUG, STRAIGHT ADAPTER
TUBE
HEAD
1
2
3
4
5
6
7
8
1
1
1
1
1
1
4
1
1
2
4
1
1
1
1
6
PISTON
NUT, PISTON (3/4-NF HEX)
TIEROD,HYD CYL W/NUT
BASE CLEVIS
CLEVIS, ROD
PIN
9
10
11
12
13
14
15
16
CLIP-X HAIR PIN
HYD HOSE-3/8-8W/ 1/2FITTING (NOT SHOWN)
HOSE #6 - 8MP - 8MP - 180LG (NOT SHOWN)
HOSE #6 - 8 MP - 8 MP 216 LG (NOT SHOWN)
HYD HOSE ONE (NOT SHOWN)
ADAPTER, HYD, ELBOW SWIVEL (NOT SHOWN)
Note; Center Cylinder has stroke control (Item 13) on shaft. The unit must already have hydraulic cylinders to fit arms and
deck.
FS15 Master Parts Book (July-05)
©2005 Alamo Group Inc.
Parts Section – 23
Download from Www.Somanuals.com. All Manuals Search And Download.
CYLINDER ASSEMBLY - LEVEL LIFT REPLACEMENT ASSY (P/N 8719) S/N 00101 - 10429 OCT 1977 - MA
ITEM
PART NO.
QTY.
DESCRIPTION
8719
8772
4705M
8768
8769
4706
8754
8773
4689
8774
8764
8354
163016
00755234
1
1
1
1
1
1
1
4
8
1
1
2
4
1
HYDRAULIC CYLINDER
CAP
PISTON NUT
PISTON
TUBE
PISTON ROD
CLEVIS,OUTER
TIE ROD
NUT HEX 9/16-18NF PL
HEAD
SEAL KIT
1
2
3
4
5
6
7
8
9
10
11
12
?13
PIN-HYD. CYLINDER
PIN, COTTER 3/16 X 2
CONTROL SPACER KIT (NOT SHOWN.)
Note: Center cylinder WILL NOT have screw on stroke control. The unit must already have hydraulic level left for these
cylinders it mount to axle arms and deck.
REPLACE CYL’S ONLY NOT USED IN PRODUCTION UNIT, PARTS WILL NOT INTERCHANE WITH EARLIER
CYLINDERS.
FS15 Master Parts Book (July-05)
©2005 Alamo Group Inc.
Parts Section – 24
Download from Www.Somanuals.com. All Manuals Search And Download.
CYLINDER ASSEMBLY - LEVEL LIFT REPLACEMENT ASSY (P/N 8720) S/N 00101 - 10429 OCT 1977 - MA
ITEM
PART NO.
QTY.
DESCRIPTION
8720
8778
4705
8775
8776
4706
8754
8773
4689
8779
8765
8354
163016
-
WING AXLE 3 1/4 X 8 SLAVE CYLINDER
BASE CLEVIS
PISTON NUT
PISTON
1
2
3
4
5
6
7
8
1
1
1
1
1
1
4
8
1
1
2
4
TUBE
PISTON ROD
ROD CLEVIS
TIE ROD
NUT 9/16 - 18
HEAD
SEAL KIT
PIN, CLEVIS
COTTER PIN
9
10
11
12
Note: Center cylinder WILL NOT have screw on stroke control. The unit must already have hydraulic level left for these
cylinders it mount to axle arms and deck.
REPLACE CYL’S ONLY NOT USED IN PRODUCTION UNIT, PARTS WILL NOT INTERCHANE WITH EARLIER
CYLINDERS.
FS15 Master Parts Book (July-05)
©2005 Alamo Group Inc.
Parts Section – 25
Download from Www.Somanuals.com. All Manuals Search And Download.
CYLINDER ASSEMBLY - LEVEL LIFT REPLACEMENT ASSY (P/N 8721) S/N 00101 - 10429 OCT 1977 - MA
ITEM
PART NO.
QTY.
DESCRIPTION
8721
8784
4675M
8780
8781
8753
8754
8785
4376
8786
8766
8354
163016
1
1
1
1
1
1
1
4
8
1
1
2
4
CYL HYD LEVEL LIFT 3 DIA
CAP (HYD. CYLINDER)
NUT PISTON
PISTON
TUBE
PISTON ROD
CLEVIS,OUTER
TIE ROD
NUT HEX 1/2-20 NF PL
HEAD
SEAL KIT
1
2
3
4
5
6
7
8
9
10
11
12
PIN-HYD. CYLINDER
PIN, COTTER 3/16 X 2
Note: Center cylinder WILL NOT have screw on stroke control. The unit must already have hydraulic level left for these
cylinders it mount to axle arms and deck.
REPLACE CYL’S ONLY NOT USED IN PRODUCTION UNIT, PARTS WILL NOT INTERCHANE WITH EARLIER
CYLINDERS.
FS15 Master Parts Book (July-05)
©2005 Alamo Group Inc.
Parts Section – 26
Download from Www.Somanuals.com. All Manuals Search And Download.
CYLINDER ASSEMBLY - WING-HYDRAULIC CYLINDER & HOSE GROUP S/N 00101 - 01376 OCT 1977 - JAN
ITEM
PART NO.
QTY.
DESCRIPTION
1
2
3
4
00759947
6513015
94514
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
2
4
4
4
1
8
8
1
1
1
1
-
CYLINDER 3 X 14 W/1-1/4 ROD
HOSE #6 - 8 MP - 8 MP 216 LG
ADAPTER, HYD, ELBOW SWIVEL
NUT
CLEVIS 1 1/8-12 NF THD
HEAD 1 1/4 ROD 3 BR
HEAD 3 BORE X 1-1/8 ROD
HEAD 3 BORE X 1-1/8 ROD
ROD,CYL 1-1/4 DIA,1-1/4-12 THD
ROD
691351
65130A12
65113B8
65130A4
65130A4
65130B15
651306
5
6
7
8
651307
691315
TUBE OUTBOARD
PISTON, 3, O RING SEAL
PISTON, 3, UCUP SEAL
CLEVIS BASE 1/2
6511311
65113A12
0651130001
8354
00000400
65130A8
0651300003
6511320
00001200
5B7140
6511322
00013901
00750208
00749508
65113A30
6513011A
9
CLEVIS BASE 7/16
10
11
12
PIN-HYD. CYLINDER
PIN-COTTER 1/8 X 1-1/2 PLATED
TIE ROD 1/2 X 19
ROD
13
14
NUT, PISTON (3/4-NF HEX)
NUT,HEX 1/2 NC PL
NUT 7/16 NC HEX
BOLT
NUT HEX 3/8 NC PL
PLUG,BREATHER 1/2 NPTM - 007
PLUG 1/2-14 NPT
SEAL KIT 3 CR CYL, 1 1/4
SEAL KIT,3 CROSS CYLINDER 1 1/8
15
16
17
18
-
Note: This cylinder used throught approx 1982. Check length of barrel before ordering replacement pars. If the cylinder
was used check size of tie rods (Item #12) and size of cylinder rod (Item #6).
REPLACEMENT PARTS FOR THIS COMPLETE CYLINDER ASSY IS 00759947.
PARTS WILL NOT INTERCHANGE.
FS15 Master Parts Book (July-05)
©2005 Alamo Group Inc.
Parts Section – 27
Download from Www.Somanuals.com. All Manuals Search And Download.
CYLINDER ASSEMBLY - WING-LANTEX HYDRAULIC CYL & HOSE GRP S/N 01377 - 10429 JAN 1982 - MAY
ITEM
PART NO.
QTY.
DESCRIPTION
1
2
3
4
5
6
7
8
65130B1
6513015
94514
0651130001
0651130005
0651300001
0651300002
5B6240
1
1
1
1
1
1
1
1
1
1
8
1
4
1
2
4
1
-
HYD. CYL. 3" BORE X 14" STROKE 1-1/4" DIA. ROD BASE END
HOSE #6 - 8 MP - 8 MP 216 LG
ADAPTER, HYD, ELBOW SWIVEL
CLEVIS BASE
PISTON
ROD
TUBE
NUT,ROD CLEVIS
SHCS 3/8 NF 1-3/4
CLEVIS 1-14 NF THD
NUT 1/2 NF HEX
HEAD 3 HYD CYL 1-1/4 ROD
ROD
9
7E62414
10
11
12
13
14
15
16
17
0651130022
02816800
0651130016
0651300003
691351
NUT
8354
PIN-HYD. CYLINDER
PIN-COTTER 1/8 X 1-1/2 PLATED
PLUG,BREATHER 1/2 NPTM - 007
SEAL KIT,3 LANTEX CYLINDER
00000400
00750208
0651130014
Note: This cylinder used approx. After 1982 always check barrel lenght (Item #7) before ordering replacement parts.
REPLACE THIS CYLINDER ASSY WITH #00759947.
PARTS WILL NOT INTERCHANGE.
FS15 Master Parts Book (July-05)
©2005 Alamo Group Inc.
Parts Section – 28
Download from Www.Somanuals.com. All Manuals Search And Download.
CYLINDER ASSEMBLY - WING-REPLACEMENT S/N 00101 - 10429 OCT 1977 - MAY 1988
ITEM
PART NO.
QTY.
DESCRIPTION
1
2
3
4
5
5
6
7
00759947
00756496
94517
7329
94507
00760196
00760198
00760201
00760195
00013901
00023100
8754
1
1
1
1
1
1
1
1
1
1
1
1
8
1
4
1
2
2
1
CYLINDER 3 X 14 W/1-1/4 ROD
HOSE-#4-6MP-6MP-216LG
ADAPTER, HYD, ELBOW SWIVEL
ADAPTER, HYD, STGHT RESTRICTOR
ADAPTER, HYD, REDUCER
BASE, CYL 3
PISTON
ROD, CYL 3X14
TUBE, CYL 3X14
NUT HEX 3/8 NC PL
HHCS 3/8 -16UNC 1-1/2 PL5
CLEVIS,OUTER
INSTALL SHEET-BELT TENSIONER&S
HEAD, CYL 3
TIE ROD, CYL 3X14
NUT PISTON
PIN-HYD. CYLINDER
PIN,COTTER
BREATHER,1/2 SQ HD CORED
SEAL KIT (3 DIA HYD CYL)
8
9
10
11
12
13
14
15
16
17
18
?19
4690W
00760197
00760203
4675M
8354
162012
6511324
00760199
Note: This is a replcaement cylinder and was not used in production.
PARTS WILL NOT INTERCHANGE WITH EARLIER CYLINDERS.
FS15 Master Parts Book (July-05)
©2005 Alamo Group Inc.
Parts Section – 29
Download from Www.Somanuals.com. All Manuals Search And Download.
DECALS S/N 00101 - 10429 OCT 1977 - MAY 1988
ITEM
PART NO.
QTY.
DESCRIPTION
1
2
D303
D301
3
1
DECAL,RHINO
DECAL,RHINO
3
5
D337
D121
3
1
DECAL-FLX-S-15
DECAL ADJ-NUTS
6
7
8
9
D122
999200
D112
D103
D102
D101A
D137
99203
D138
D131
D304
1
1
1
1
1
4
1
2
1
1
2
1
1
3
1
2
DECAL(PREV. STREAKNG)
DECAL GENERAL WARNING ALL UNIT
DECAL USE SAE GER LUB
DECAL,OPERATE AT 540 RPM
DECAL PTO SFT TO HTCH
DECAL OIL LEVEL
DECAL CCW BLADE ROTATION
DECAL, RED REFLECTOR
DECAL-CW BLADE ROTATION
DECAL NOTICE
10
11
12
13
14
15
16
17
18
21
23
24
DECAL (RHINO)
NFS
SERIAL NUMBER PLATE
DECAL-DANGER, OFFSET WGT. BOX
DECAL-DANGER,DRIVELINE
DECAL-YELLOW REFLECTOR
DECAL, ROTATING BLADE
PAINT,1 QT,RH ORANGE
PAINT, 1 GAL,RH ORNG
PAINT,(SPRAY)RHINO ORANGE
999403
00756494
99204
999401
26E127001
26E127004
26E127000
A/R
A/R
A/R
FS15 Master Parts Book (July-05)
©2005 Alamo Group Inc.
Parts Section – 30
Download from Www.Somanuals.com. All Manuals Search And Download.
DEFLECTOR - REAR WING S/N 01497 - 10429 JUN 1982 - MAY 1988
ITEM
PART NO.
QTY.
DESCRIPTION
6
7
8
13
00002700
00001800
00756876
02030700
10
10
2
FLATWASHER 1/2 PL STD
LOCKNUT TLM 1/2 NC PLB
WING REAR COVER
7
HHCS 1/2-13UNC 1-1/4 PL5
FS15 Master Parts Book (July-05)
©2005 Alamo Group Inc.
Parts Section – 31
Download from Www.Somanuals.com. All Manuals Search And Download.
DEFLECTOR - RUBBER FRONT CENTER S/N 00101 - 10429 OCT 1977 - MAY 1988
ITEM
PART NO.
QTY.
DESCRIPTION
00758370
00758261
00758263
02030700
00001800
1
1
1
3
3
DEFLECTOR, ASY, FRT CTR
BAND RUBBER GD FRT CTR
PANEL RUBBER GD FRT CTR
HHCS 1/2-13UNC 1-1/4 PL5
LOCKNUT TLM 1/2 NC PLB
1
2
3
4
Note: These will not fit earlier serial numbers. Complete of deflectors front-center, left and right wings assembly
#00758355.
For 10 foot unit order assembly #00756994.
FS15 Master Parts Book (July-05)
©2005 Alamo Group Inc.
Parts Section – 32
Download from Www.Somanuals.com. All Manuals Search And Download.
DEFLECTOR - RUBBER FRONT WING LEFT & RIGHT S/N 00101 - 10429 OCT 1977 - MAY 1988
ITEM
PART NO.
QTY.
DESCRIPTION
00758368
00758264
00758259
02030700
00001800
1
1
1
7
7
DEFLECTOR ASSEMBLY
PANEL
BAND
HEX BOLT
LOCKNUT
1
2
3
4
FS15 Master Parts Book (July-05)
©2005 Alamo Group Inc.
Parts Section – 33
Download from Www.Somanuals.com. All Manuals Search And Download.
DEFLECTOR - RUBBER LEFT & RIGHT CENTER S/N 00101 - 10429 OCT 1977 - MAY 1988
ITEM
PART NO.
QTY.
DESCRIPTION
00758369
00758262
00758260
02030700
00001800
1
1
1
2
2
DEFLECTOR, ASY, FRT L-R CTR
PANEL RUBBER GD L&R CTR
BAND, RUBBER GD LH & RH
HHCS 1/2-13UNC 1-1/4 PL5
LOCKNUT TLM 1/2 NC PLB
1
2
3
4
Note: These will not fit earlier serial numbers. Complete of deflectors front-center, left and right wings assembly
#00758355.
For 10 foot unit order assembly #00756994.
FS15 Master Parts Book (July-05)
©2005 Alamo Group Inc.
Parts Section – 34
Download from Www.Somanuals.com. All Manuals Search And Download.
DRIVELINE ASSEMBLY - CTR GEARBOX SQUARE SHAFT SLIP 35R S/N 00101 - 10429 OCT 1977 - MAY 19
ITEM
PART NO.
QTY.
DESCRIPTION
1
0657070000
W707LSA
W341
1
1
1
1
1
1
1
1
1
1
4
4
2
1
DRIVELINE, SLIP ASSY
CTR D/L,S15,
SHAFT SQ
YOKE 1 3/16 SQ HOLE PAINT BLK
SHSS 1/2 NF 1-1/4
NUT 1/2 NF HEX
YOKE W/TAPERED SHAFT PAINT BLK
YOKE,SLIDE COLLAR PAINT BLACK
YOKE, TORQUE LIMITER (7-1/16
BUSHING SP & TL YOKE
HEXB 5/16NC 2
NUT TOPLOCK 5/16
CROSS REPAIR KIT, CTR
YOKE,1-3/16 SQ HOLE W/SETSCREW
2
3
4
5
6
W324
9C482010
5B8200
W318
W284A
W3071
271105B
7AH551816
5JRC5180
W279R
7
8
9
10
11
12
W324A
FS15 Master Parts Book (July-05)
©2005 Alamo Group Inc.
Parts Section – 35
Download from Www.Somanuals.com. All Manuals Search And Download.
DRIVELINE ASSEMBLY - OUTBOARD SQUARE SHAFT ASSEMBLY 35R S/N 00101 - 10429 OCT 1977 - MAY 1
ITEM
PART NO.
QTY.
DESCRIPTION
1
2
3
4
5
6
7
8
W705RB7
W316B
W3071
271105B
W279R
7AH551816
5JRC5180
W702RZ4
W702RZ
W312Z
1
1
1
1
1
4
4
1
1
1
1
1
1
SHFT, SHLD,SM TL YK
YK & SHFT ASSY 39-1/8
YOKE, TORQUE LIMITER (7-1/16
BUSHING SP & TL YOKE
CROSS REPAIR KIT, CTR
HEXB 5/16NC 2
NUT TOPLOCK 5/16
HSG, SHLD,TPR YOKE
HSG, SHLD,QD YOKE
9
10
YOKE TB & SLV 50
W318
W284A
17C1981
YOKE W/TAPERED SHAFT PAINT BLK
YOKE,SLIDE COLLAR PAINT BLACK
GREASE ZERK
11
FS15 Master Parts Book (July-05)
©2005 Alamo Group Inc.
Parts Section – 36
Download from Www.Somanuals.com. All Manuals Search And Download.
DRIVELINE ASSEMBLY - PTO SQUARE SHAFT ASSEMBLY 44R S/N 00101 - 10429 OCT 1977 - MAY 1988
ITEM
PART NO.
QTY.
DESCRIPTION
1
W805O4
W805O11
W816A
W826
W827A
W840
W802B
W812A
W821A
W44B2A
W44B3
W44B4A
17C1981
1
1
1
1
1
1
1
1
1
1
1
1
1
SHFT, SHLD,TPR YK PAINT BLACK
SHAFT 44R SQ ASY 1-3/4-20 SPL
YOKE SHAFT PAINT BLACK
YOKE,SAE TAPER PAINT BLACK
YOKE,CLP,1-3/4-20SP PAINT BLK
CROSS REPR KIT
HSG,SHLD,QD YK PAINT BLACK
YOKE SLEEVE PAINT BLACK
YOKE,Q.D. 6BSPLN PAINT BLACK
QD REPAIR KIT
2
3
4
5
6
7
8
9
10
11
SPRING-PIN LOCK
WASHER X
GREASE ZERK
FS15 Master Parts Book (July-05)
©2005 Alamo Group Inc.
Parts Section – 37
Download from Www.Somanuals.com. All Manuals Search And Download.
DRIVELINE ASSEMBLY - SHIELDING ASSEMBLY SQUARE SHAFTS S/N 00101 - 10429 OCT 1977 - MAY 198
ITEM
PART NO.
QTY.
DESCRIPTION
1
W811Q
W815R
W315RA1
W311RZ1
W335
00751176
W936
AR
AR
AR
AR
AR
AR
AR
AR
SHIELD D/L OUTER PAINT BLACK
SHLD IN ASSY PAINT BLACK
SHIELD ASSY, INNER
SHIELD, OUTER
BEARING, NYLON
RETAINER, NYLON BRG.
WASHER THRUST
2
4
5
6
7
W937
RING SNAP
FS15 Master Parts Book (July-05)
©2005 Alamo Group Inc.
Parts Section – 38
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTES
FS15 Master Parts Book (July-05)
©2005 Alamo Group Inc.
Parts Section – 39
Download from Www.Somanuals.com. All Manuals Search And Download.
GEARBOX ASSEMBLY - CENTER SECTION S/N 00101 - 10429 OCT 1977 - MAY 1988
FS15 Master Parts Book (July-05)
©2005 Alamo Group Inc.
Parts Section – 40
Download from Www.Somanuals.com. All Manuals Search And Download.
GEARBOX ASSEMBLY - CENTER SECTION S/N 00101 - 10429 OCT 1977 - MAY 1988
ITEM
PART NO.
QTY.
DESCRIPTION
1
2
3
4
5
6
7
8
7010414
1
1
1
1
1
1
1
1
1
1
2
2
1
1
1
2
HOUSING MAIN
00748532
00752155
7010416
HOUSING-BEARING CAP
CAP BEARING RETAINING
SHAFT, INPUT 1-3/8-6
OUTPUT SHAFT & GEAR
GEAR BEVEL-22 TOOTH
BEARING CONE TIMKEN #LM603049
BEARING CUP
BEARING CONE 16137
BEARING CUP 16282
BEARING CONE
BEARING CUP 363
SEAL
OIL SEAL
RING
701047R
00752159
00748527
00748525
00753738
00753737
00748522
701044R
00749509
00748519
7010422
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
00748526
701046R
00758647
7010419
RING, RETAINING
SPACER
SHIM, ADJUSTMENT .010 OR .25M
SHIM KIT
1
A/R
A/R
1
8
4
4
8
4
1
4
1
1
1
2
4
00758648
00011400
02030700
7AH5121620
00011700
00753743
00748547
00748539
5E16140
00606000
00565000
00749508
5312316
SHIM ,ADJUSTMENT O.5
HHCS 3/8 NC 1 PL5
HHCS 1/2-13UNC 1-1/4 PL5
C/S 3/4 X 2 1/2 NF 5
LOCKWASHER 5/16 PL STD
LOCKWASHER
FLATWASHER 1-1/32 X 2-3/16X.22
NUT TOPLOCK 3/4 NF PLB
NUT CASTLE 1 -14 STD PL
PIN-COTTER 3/16 X 2
PLUG, HEX HEAD PIPE 1/8-27NPT
PLUG 1/2-14 NPT
WASHER (SPECIAL)
NOTE: ITEM 15,23,27, & 32 NOT INCLUDED WITH GEARBOX ASSEMBLY AND MUST BE SPECIFIED WHEN
ORDERING 701041 GEARBOX ASSEMBLY.
FS15 Master Parts Book (July-05)
©2005 Alamo Group Inc.
Parts Section – 41
Download from Www.Somanuals.com. All Manuals Search And Download.
GEARBOX ASSEMBLY - DIVIDER (COMER) S/N 01901 - 10429 FEB 1985 - MAY 1988
FS15 Master Parts Book (July-05)
©2005 Alamo Group Inc.
Parts Section – 42
Download from Www.Somanuals.com. All Manuals Search And Download.
GEARBOX ASSEMBLY - DIVIDER (COMER) S/N 01901 - 10429 FEB 1985 - MAY 1988
ITEM
PART NO.
QTY.
DESCRIPTION
0656030000
00753232
00753240
00753233
00753221
00753234
00753228
00753223
00755070
00753238
00753225
00753237
00753237
00753239
00753226
00753230
00753231
00755069
00753222
00753235
00753227
DIVIDER GEARBOX
CASING
COVER
SHAFT
SHAFT
CROWNWHEEL
BEVEL PINION
BEARING
BEARING
OIL SEAL
1
2
3
4
5
6
7
8
1
1
1
2
1
2
4
2
2
2
2
2
1
2
6
6
1
2
2
2
9
10
11
12
13
14
15
16
17
19
21
22
OIL SEAL
INTERNAL CIRCLIP
INTERNAL CIRCLIP
OIL FILLER PLUG
PLUG
HEXB METRIC 8-P1.25- 30MM PL5
SCHNORR WASHER
GASKET
SHIM
SHIM
TAKE-UP RING
NOTE: ITEMS 30 AND 31 ARE NOT FURNISHED WITH THE GEARBOX ASSEMBLY. THIS GEARBOX HAS 1 3/8
TAPER SHAFTS.
P/N 651033 GEAR REPLACE BY P/N 00757028.
Offest units used gearbox#0651030000 (same as #65103 except only on wing out put shaft) Cover #0682053, 6 bolts
#0682053, 6 bolts #7A10118, &6 lockwashers #131000.
FS15 Master Parts Book (July-05)
©2005 Alamo Group Inc.
Parts Section – 43
Download from Www.Somanuals.com. All Manuals Search And Download.
GEARBOX ASSEMBLY - DIVIDER S/N 00101 - 01900 OCT 1977 - FEB 1985
FS15 Master Parts Book (July-05)
©2005 Alamo Group Inc.
Parts Section – 44
Download from Www.Somanuals.com. All Manuals Search And Download.
GEARBOX ASSEMBLY - DIVIDER S/N 00101 - 01900 OCT 1977 - FEB 1985
ITEM
PART NO.
QTY.
DESCRIPTION
65103
GEARBOX ASSY
COTTER PIN
CASTE NUT (SPECIAL THIN)
SPECIAL WASHER (HEAT TREATED)
INPUT SHAFT
BEARING CARRIER CAP
PLACE BOLT
BEVEL GEAR, 18-TEETH
PRIMARY GEAR BOX HOUSING
SHIM SET
1
2
3
4
5
6
7
8
16212012
5312315
5312316
651035
651037
7A1101110
00757028
651031
5312312
PT204A
531232
651036
W84
4
3
4
1
1
18
3
1
3
3
2
2
3
3
2
2
4
2
2
3
3
3
2
1
8
8
1
1
1
6
6
1
1
1
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
GASKET
DRIVE SHAFT HOUSING
OUTPUT SHAFT
BEARING CUP
BEARING CONE
OIL SEAL
BEARING COLLAR
KEY (HEAT TREATED)
LOCKNUT
LOCKWASHER
BEARING CUP
BEARING CONE
WOODRUFF KEY
OIL SEAL
GASKET
LOCKWASHER
CAPSCREW
BREATHER PLUG
GEAR BOX COVER PLATE
PIPE PLUG
LOCKWASHER
CAPSCREW
W83
PT103
271096
5312310
PT104
PT105
531237
531238
PT209
5310415
651034
00001300
00750959
301021
651032
00751003
00010300
00752658
5DR12160
D112
NUT
DECAL (USE SAE GEAR LUBE)
DECAL (OIL LEVEL)
D101A
FS15 Master Parts Book (July-05)
©2005 Alamo Group Inc.
Parts Section – 45
Download from Www.Somanuals.com. All Manuals Search And Download.
GEARBOX ASSEMBLY - LEFT WING S/N 00101 - 10429 OCT 1977 - MAY 1988
FS15 Master Parts Book (July-05)
©2005 Alamo Group Inc.
Parts Section – 46
Download from Www.Somanuals.com. All Manuals Search And Download.
GEARBOX ASSEMBLY - LEFT WING S/N 00101 - 10429 OCT 1977 - MAY 1988
ITEM
PART NO.
QTY.
DESCRIPTION
0656230000
00563900
00564300
711052
GEARBOX
MAIN HOUSING
CAP, BEARING
CAP W/SPACER
SHAFT,1-3/8-6 INPUT W/PILOT
PINION OUTPUT SHAFT
INPUT GEAR
BEARING,BALL
BEARING, BALL
SPACER, BEARING
SHIM
GASKET
SNAP-RETAINER RING
RING,RETAINING
RING, RETAINING
SEAL, OIL OUTPUT
OIL SEAL
PLUG, HEX HEAD PIPE 1/8-27NPT
PLUG 1/2-14 NPT
HHCS 3/8 NC 1 PL5
HHCS,3/8NC X 1-1/4,ZP,GRD5
C/S 5/8 X 2 NF GR5
WASHER
LOCKWASHER 5/16 PL STD
FLATWASHER 1-1/32 X 2-3/16X.22
NUT CASTLE 1 -14 STD PL
PIN-COTTER 3/16 X 2
NUT TOPLOCK 5/8 NF PLB
1
2
3
4
5
6
7
8
1
1
1
1
1
1
1
3
1
A/R
1
2
1
3
1
1
1
1
6
4
4
4
10
1
1
1
0656230001
00564000
00564600
00564800
00563700
00757682
00564400
00563600
00612703
00564500
00564100
00563500
00564200
00565000
00749508
00011400
00753642
7AH5101816
W67
9
10
11
12
13
14
15
16
17
18
19
20
22
24
25
26
28
29
30
00011700
00748547
5E16140
00606000
00749136
4
IMPORTANT NOTE: Item #3 and Item #9 must be replaced together at the same time, do not change one without the
other. If #711052 or #6710510 is ordered a cup and spacer will be shipped together as a kit so order one # or the other,
not both.
ITEMS 12,22,24,29, AND 30 ARE NOT FURNISHED WITH GEARBOX ASSEMBLY AND MUST BE SPECIFIED, IF
REQUIRED.
FS15 Master Parts Book (July-05)
©2005 Alamo Group Inc.
Parts Section – 47
Download from Www.Somanuals.com. All Manuals Search And Download.
GEARBOX ASSEMBLY - RIGHT WING S/N 00101 - 10429 OCT 1977 - MAY 1988
FS15 Master Parts Book (July-05)
©2005 Alamo Group Inc.
Parts Section – 48
Download from Www.Somanuals.com. All Manuals Search And Download.
GEARBOX ASSEMBLY - RIGHT WING S/N 00101 - 10429 OCT 1977 - MAY 1988
ITEM
PART NO.
QTY.
DESCRIPTION
0656220000
0656220001
0656220003
00757683
0656220002
00564000
00564600
00564800
00563700
00757682
00564400
00563600
00612703
00564500
00564100
00563500
00564200
00565000
00749508
00011400
00753642
7AH5101816
00751003
W67
-
GEARBOX
HOUSING
CAP
CAP, OUTPUT
SHAFT
PINION OUTPUT SHAFT
INPUT GEAR
BEARING,BALL
BEARING, BALL
1
2
3
4
5
6
7
8
1
1
1
1
1
1
1
3
1
A/R
1
2
1
3
1
1
1
1
6
4
4
1
4
10
1
1
1
4
9
SPACER, BEARING
SHIM
GASKET
10
11
12
13
14
15
16
17
18
19
20
22
23
24
25
26
28
29
30
SNAP-RETAINER RING
RING,RETAINING
RING, RETAINING
SEAL, OIL OUTPUT
OIL SEAL
PLUG, HEX HEAD PIPE 1/8-27NPT
PLUG 1/2-14 NPT
HHCS 3/8 NC 1 PL5
HHCS,3/8NC X 1-1/4,ZP,GRD5
C/S 5/8 X 2 NF GR5
PIPE PLUG 1/4 NPTM STANDARD
WASHER
LOCKWASHER 5/16 PL STD
DECAL - PC2040
NUT CASTLE 1 -14 STD PL
PIN-COTTER 3/16 X 2
NUT TOPLOCK 5/8 NF PLB
00011700
00768547
5E16140
00606000
00749136
IMPORTANT NOTE: Item #3 and Item #9 must be replaced together at the same time, do not change one without the
other. If #711052 or #6710510 is ordered a cup and spacer will be shipped together as a kit so order one # or the other,
not both.
ITEMS 12,22,24,29, AND 30 ARE NOT FURNISHED WITH GEARBOX ASSEMBLY AND MUST BE SPECIFIED, IF
REQUIRED.
FS15 Master Parts Book (July-05)
©2005 Alamo Group Inc.
Parts Section – 49
Download from Www.Somanuals.com. All Manuals Search And Download.
GEARBOX ATTACHMENT - DIVIDER & CENTER GEARBOX S/N 00101 - 10429 OCT 1977 - MAY 1988
ITEM
PART NO.
QTY.
DESCRIPTION
1
2
0651470000
0656130100
0656520000
1
1
1
SHIELD ASSEMBLY
SHIELD, PRIMARY GEARBOX
CTR GEAR BOX SHIELD
FS15 Master Parts Book (July-05)
©2005 Alamo Group Inc.
Parts Section – 50
Download from Www.Somanuals.com. All Manuals Search And Download.
GEARBOX ATTACHMENT- RIGHT & LEFT WING GEARBOX S/N 00101 - 10429 OCT 1977 - MAY 1988
ITEM
PART NO.
QTY.
DESCRIPTION
1
0656451210
0656451110
1
1
SHIELD WLD
SHIELD WLD
FS15 Master Parts Book (July-05)
©2005 Alamo Group Inc.
Parts Section – 51
Download from Www.Somanuals.com. All Manuals Search And Download.
HOSE BRACKET COMPONENTS S/N 00101 - 10429 OCT 1977 - MAY 1988
ITEM
PART NO.
QTY.
DESCRIPTION
1
2
3
4
5
0651140100
0651150100
02675800
00010400
00010300
1
1
2
2
2
WLDMT, HYD. HOSE BRKT
HYD. HOSE BRKT.
HHCS 5/8-11UNC 1-1/2 PL5
NUT 5/8 NC HEX PL
LOCKWASHER 5/8 PL STD
FS15 Master Parts Book (July-05)
©2005 Alamo Group Inc.
Parts Section – 52
Download from Www.Somanuals.com. All Manuals Search And Download.
HUB ASSEMBLY - CENTER & OUTBOARD S/N 10148 - 10428 JAN 1988 - MAY 1988
ITEM
PART NO.
QTY.
DESCRIPTION
00757241
00756576
00750434
00756577
00752177
00750614
00756490
00750616
00756493
00756492
00026200
00003500
00756489
0371242102
WHEEL HUB, PREASSY
BEARING CUP OUTSIDE
BEARING CONE INSIDE
BEARING CUP INSIDE
BOLT, STUD 1/2-20 NF X 1-7/8
NUT 1/2-20NF 90DEG.CONE LUG PL
NUT SLOTTED THIN 1 NF PLC
OIL SEAL
WASHER
DUST CAP
PIN-COTTER 5/32 X 1-1/2
ZERK FITTING 1/8 STRAIGHT
HUB W/ CUPS & STUBS
BEARING CONE
3
4
5
6
7
8
9
10
11
12
13
14
15
1
1
4
5
5
1
1
1
1
1
1
1
1
Note: This hub was used on all center and outboard, standard, level lift axles between these serial numbers. this hub has
no washer behind seal on spindle and logo cast into backside of hub.
When using sectional tires install item #7 flat against wheel, opposite picture.
FS15 Master Parts Book (July-05)
©2005 Alamo Group Inc.
Parts Section – 53
Download from Www.Somanuals.com. All Manuals Search And Download.
HUB ASSEMBLY - OUTBOARD AXLES S/N 00101 - 10147 OCT 1977 - JAN 1988
ITEM
PART NO.
QTY.
DESCRIPTION
271033
PT108
HUB GROUP ASSY
BEARING CUP
BEARING CONE
BEARING CUP
3
4
5
6
7
8
9
10
11
12
13
14
15
1
1
1
5
5
1
1
1
1
1
1
1
1
00006500
00016900
13198
00750614
5DR12160
00771458
15B1200
PT112
1621/2010
00003500
PT110SA
PT109
BOLT, HUB
NUT 1/2-20NF 90DEG.CONE LUG PL
NUT 3/4 NF SLOTTED
OIL SEAL
WASHER 3/4 P SAE
HUB CAP
CTR
ZERK FITTING 1/8 STRAIGHT
WHEEL HUB
BEARING CONE
Note: When using sectional tires install item #7 flat against wheel, opposite picture.
FS15 Master Parts Book (July-05)
©2005 Alamo Group Inc.
Parts Section – 54
Download from Www.Somanuals.com. All Manuals Search And Download.
HUB ASSEMBLY - STANDARD CENTER AXLE S/N 00101 - 10147 OCT 1977 - JAN 1988
ITEM
PART NO.
QTY.
DESCRIPTION
371247
HUB, ASY
BEARING CUP
3
4
5
6
7
8
9
10
11
12
13
14
15
00016900
371247E
371247D
13198
00750614
371247J
371247F
371247H
371247H
1621/2012
00003500
371247SA
371247C
1
1
1
5
5
1
1
1
1
1
1
1
1
BEARING CONE 342A
BEARING CUP 332
BOLT, HUB
NUT 1/2-20NF 90DEG.CONE LUG PL
NUT, 7/8-14 UNF STD SLOTTED
SEAL
WASHER
WASHER
PINS-CTR 5/32 X 1 1/2
ZERK FITTING 1/8 STRAIGHT
HUB
BEARING CONE
Note: Spindel will have washer welded to it behind seal. When using sectional tires install item #7 flat against wheel,
opposite picture.
FS15 Master Parts Book (July-05)
©2005 Alamo Group Inc.
Parts Section – 55
Download from Www.Somanuals.com. All Manuals Search And Download.
HYDRAULIC CONTROL VALVE MOUNTING KIT S/N 00101 - 10429 OCT 1977 - MAY 1988
ITEM
PART NO.
QTY.
DESCRIPTION
1
2
3
4
651401
00016200
13500
1
6
6
6
MT BKT WLD
HHCS 5/16NC 2 PL5
L WSHR 5/16
5B5180
NUT 5/16 NC HEX
FS15 Master Parts Book (July-05)
©2005 Alamo Group Inc.
Parts Section – 56
Download from Www.Somanuals.com. All Manuals Search And Download.
HYDRAULIC HOSE ADAPTERS S/N 00101 - 10429 OCT 1977 - MAY 1988
ITEM
PART NO.
QTY.
DESCRIPTION
2
4
5
00275400
651311
651312
3
3
3
Q.D, COUPLER #8
QD COUPLER HALF FEMALE
COUPLER HALF, MALE
Note: Choice of couplers is up to the customer.
FS15 Master Parts Book (July-05)
©2005 Alamo Group Inc.
Parts Section – 57
Download from Www.Somanuals.com. All Manuals Search And Download.
HYDRAULIC VALVE ASSEMBLY - DETENT W/SPRING ASSEMBLY S/N 00101 - 10429 OCT 1977 - MAY 1988
ITEM
PART NO.
QTY.
DESCRIPTION
18
19
20
21
22
23
24
25
26
27
28
29
30
6514016
6514017
6514018
6514019
6514020
6514021
7E42012
6514022
7D42014
6514023
6514024
6514025
65140A54
1
1
1
1
1
1
1
1
4
1
1
1
1
HOUSING DETENT
SLEEVE
WASHER
SPRING CENTERING (25#)
COLLAR STEP
WASHER
C/S1/4 X 1 1/2 SK HD
CAP,END
BOLT
BALL 1/4 STEEL
SPRING
PLUG
WASHER
Standard quantities for one Detent Assembly 3 required per hydraulic valve.
FS15 Master Parts Book (July-05)
©2005 Alamo Group Inc.
Parts Section – 58
Download from Www.Somanuals.com. All Manuals Search And Download.
HYDRAULIC VALVE ASSEMBLY - OPEN/CLOSED CENTER VALVE S/N 00101 - 10429 OCT 1977 - MAY 1988
ITEM
PART NO.
QTY.
DESCRIPTION
1
2
3
4
5
6
7
8
19E13/41/2
65140A47
65140A48
7E4204
2
3
3
6
3
6
6
3
3
3
3
3
3
1
1
1
1
PIPE BUSHING
HANDLE
KIT-PIN
SHCS 1/4 NC 1/2
BRKT
PLATE RETAINER
SEAL, O-RING
POPPET
SPRING,LIFT CHECK
SEAL, O-RING
PLUG
PLATE,1/16 ORIFICE
65140A46
6514012
6514013
6514026
6514027
6514028
6514029
6514030
6514031
65140A50
6514042
6514039
6514037
9
10
11
12
13
14
15
16
17
RETAINER
NON -ADJUSTABLE RELIEF ASSEMBLY (OPEN CENTER ONLY)
CLOSED CENTER ASSEMBLY (CLOSED CENTER ONLY)
CONVERSION PLUG ASSEMBLY
NO-RELIEF ASSEMBLY (CLOSED CENTER ONLY)
FS15 Master Parts Book (July-05)
©2005 Alamo Group Inc.
Parts Section – 59
Download from Www.Somanuals.com. All Manuals Search And Download.
JACK ASSEMBLY - TOP WING S/N 00101 - 10429 OCT 1977 - MAY 1988
ITEM
PART NO.
QTY.
DESCRIPTION
1
2
3
4
5
6
7
0811140000
00749892
00751685
651081W
7A101116
131000
1
1
1
1
2
2
2
PARKING JACK
PIN-JACK RETAINING
PIN-CLIP HAIR
BKTS PARKING JACK
BLT 5/8 X 2 ZP
LOCK WASHER
5B10110
NUT 5/8 HEX, ZP
FS15 Master Parts Book (July-05)
©2005 Alamo Group Inc.
Parts Section – 60
Download from Www.Somanuals.com. All Manuals Search And Download.
LEFT SCREW S/N 00101 - 10429 OCT 1977 - MAY 1988
ITEM
PART NO.
QTY.
DESCRIPTION
1
2
3
4
5
6
?7
0656510000
651062F
00609200
02030300
00760135
00756579
0656510001
1
2
2
2
1
1
1
MANUAL-LIFT SCREW
FITTING,GREASE (DRIVE TYPE)
HEXB 1 NC 4 GR5
NUT TOPLOCK 1 NC PLB
HANDLE,MANUAL LIFT SCREW
TOP LINK THREAD LOCK
MANUAL-LIFT SCREW
FS15 Master Parts Book (July-05)
©2005 Alamo Group Inc.
Parts Section – 61
Download from Www.Somanuals.com. All Manuals Search And Download.
LEVEL LIFT KIT FIELD INSTALLATION S/N 00101 - 10429 OCT 1977 - MAY 1988
ITEM
PART NO.
QTY.
DESCRIPTION
1
2
3
4
5
6
7
8
0652140120
0652140130
0652140140
0652140150
371063A
0652140160
691154
5GR12100
7AH5101132
02956948
15B1600
163016
65107A3C
0652150100
0652150000
1
1
1
1
1
1
1
1
2
2
1
1
1
1
WLDMT, BASE
WLDMT, PIVOT ARM
WLDMT, SPRING ROD
SPRING GUIDE
SPRING
PIN
PIN
LOCKNUT TLM 3/4 NC PL
C/S 5/8 X 4 NC GR.5
LOCKNUT 5/8 NC PLC
WASHER 1 SAE P
PIN, COTTER 3/16 X 2
WASHER
9
10
11
12
13
14
AXLE LUG ASSEMBLY
LEVEL LIFT KIT FS15
Note: Factory level lift did not use bracket #14 on axle arms. Axle arms had longer lugs on them.
To order complete field installation level lift kit, including hydraulic cylinders and hoses, order bundle #0652150000. (Most
current type cylinder used will be used shipped)
FS15 Master Parts Book (July-05)
©2005 Alamo Group Inc.
Parts Section – 62
Download from Www.Somanuals.com. All Manuals Search And Download.
LEVEL LIFT ROD ASSEMBLY S/N 10148 - 10428 JAN 1988 - MAY 1988
ITEM
PART NO.
QTY.
DESCRIPTION
1
2
3
4
5
6
7
584042
651101
00770485A
651102
5C1490
00606000
15B1200
2
2
2
4
2
8
8
WLDMT-ROD CONTROL
ROD
NUT,EXTENDED ADJUSTMENT
PIN-DRILLED
HEXNUT 7/8 JAM ZP
PIN-COTTER 3/16 X 2
WASHER 3/4 P SAE
FS15 Master Parts Book (July-05)
©2005 Alamo Group Inc.
Parts Section – 63
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINFRAME ASSEMBLY S/N 00101 - 01900 OCT 1977 - FEB 1985
ITEM
PART NO.
QTY.
DESCRIPTION
1
2
3
4
5
6
7
8
9
0656011000
0656020200
0656020100
65109
20A4012E
5710121
1
1
1
2
2
3
6
2
2
2
WLDMT, FS15 CTR SECT M.FF
L/H O/B FRAME WLD
R/H O/B FRAME WLD
PIN HINGE
PIN
COVER PLATE
5F5180
NUT 5/16 NC WING
T,SPACER,LONG
SPACER,SHORT HINGE
SPACER,SHORT
0656270000
0656261000
0656260000
Note: Later models replaced lock pin w/bolts and nut. Part number 7A51812 bolt, 5GR5180 locknut.
PART NUMBER 0656261000 REPLACES PART NUMBER 0656260000 FOR SERIAL # 00631 AND ON. PART
NUMBER 0656261000, 21-5/8" LONG. PART #0656260000, 171/4" LONG.
FS15 Master Parts Book (July-05)
©2005 Alamo Group Inc.
Parts Section – 64
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINFRAME ASSEMBLY S/N 01901 - 10429 FEB 1985 - MAY 1988
ITEM
PART NO.
QTY.
DESCRIPTION
1
2
3
4
5
6
7
8
9
0656011000
0656020200
0656020100
65109
20A4012E
5710121
1
1
1
2
2
3
6
2
2
2
WLDMT, FS15 CTR SECT M.FF
L/H O/B FRAME WLD
R/H O/B FRAME WLD
PIN HINGE
PIN
COVER PLATE
5F5180
NUT 5/16 NC WING
T,SPACER,LONG
SPACER,SHORT HINGE
SPACER
0656270000
0656261000
0656260000
Note: Later models replaced lock pin w/bolts and nut. Part number 7A51812 bolt, 5GR5180 locknut.
FS15 Master Parts Book (July-05)
©2005 Alamo Group Inc.
Parts Section – 65
Download from Www.Somanuals.com. All Manuals Search And Download.
SKID SHOE & SIDE SKIRT - OFFSET MODELS CTR SECTION S/N 00101 - 10429 OCT 1977 - MAY 1988
ITEM
PART NO.
QTY.
DESCRIPTION
1
2
3
4
5
6
7
652071
65203L
2A381312
00001200
00001300
281316
1
1
3
8
8
3
2
SIDESKIRT WLDMT, LEFT SIDE
SHOES SLIDE
BOLT,PLOW 1/2 NC X 1-1/2 GR.5
NUT,HEX 1/2 NC PL
LOCKWASHER 1/2 PL STD
CARB 1/2NC X 2
HHCS 1/2-13UNC 1-1/2 PL5
00748823
FS15 Master Parts Book (July-05)
©2005 Alamo Group Inc.
Parts Section – 66
Download from Www.Somanuals.com. All Manuals Search And Download.
SKID SHOE & SIDE SKIRT S/N 00101 - 10429 OCT 1977 - MAY 1988
ITEM
PART NO.
QTY.
DESCRIPTION
1
2
3
4
5
6
7
8
65202RW
65202LW
65203R
65203L
15B800
00001200
7A81312
13800
1
1
1
1
12
18
12
18
6
2
2
SKIRT SIDE
SKIRT SIDE
SHOES SLIDE
SHOES SLIDE
WASHER 1/2 SAE ZP
NUT,HEX 1/2 NC PL
C/S1/2 X 1 1/2 NC
LOCK WASHER
BOLT,PLOW 1/2 NC X 1-1/2 GR.5
DECAL,RHINO
9
10
11
2A381312
D303
D337
DECAL-FLX-S-15
Note: This side skirt is 1/4" thick. Replace old 3/16" Thick side skirt with out modification.
FS15 Master Parts Book (July-05)
©2005 Alamo Group Inc.
Parts Section – 67
Download from Www.Somanuals.com. All Manuals Search And Download.
SKID SHOE ASSEMBLY S/N 00101 - 00466 OCT 1977 - FEB 1979
ITEM
PART NO.
QTY.
DESCRIPTION
1
0656490010
0656490020
2A381312
00001200
13800
00013300
15B800
1
1
2
5
5
3
2
1
ASY,RIGHT SKID SHOE
ASY,LEFT SKID SHOE
BOLT,PLOW 1/2 NC X 1-1/2 GR.5
NUT,HEX 1/2 NC PL
LOCK WASHER
HEXB 1/2 NC 2 PL5
WASHER 1/2 SAE ZP
WEAR PLATE
2
3
4
5
6
7
0656490107
Note: Later Models have item 1 welded to center section of the mainframe at assembly. These can be used to replace
skid shoe mount broken off on units
FS15 Master Parts Book (July-05)
©2005 Alamo Group Inc.
Parts Section – 68
Download from Www.Somanuals.com. All Manuals Search And Download.
SKID SHOE ASSEMBLY S/N 00101 - 10429 OCT 1977 - MAY 1988
ITEM
PART NO.
QTY.
DESCRIPTION
1
2
3
4
0656490107
2A381312
00001200
13800
1
2
2
2
WEAR PLATE
BOLT,PLOW 1/2 NC X 1-1/2 GR.5
NUT,HEX 1/2 NC PL
LOCK WASHER
FS15 Master Parts Book (July-05)
©2005 Alamo Group Inc.
Parts Section – 69
Download from Www.Somanuals.com. All Manuals Search And Download.
SPRING ASSEMBLY - CENTER AXLE S/N 00101 - 10429 OCT 1977 - MAY 1988
ITEM
PART NO.
QTY.
DESCRIPTION
1
2
3
4
5
6
7
8
9
0656460110
0656460120
5JRC12100
371063A
1
1
4
4
4
4
4
2
2
UPPER SPRING WLD
LOWER SPRING WLD
NUT TOPLOCK 3/4
SPRING
65107A4
GUIDE SPRING
00002701
02023800
37107B13
0656460240
FLATWASHER,3/4,TYPE AW,ZP
HEXB 3/4 NC 6-1/2PL
CLIP-X HAIR PIN
WLDMT-PIN
Note: Center Spring Assembly was optional eqpt.
FS15 Master Parts Book (July-05)
©2005 Alamo Group Inc.
Parts Section – 70
Download from Www.Somanuals.com. All Manuals Search And Download.
SPRING ASSEMBLY - WING S/N 00101 - 10429 OCT 1977 - MAY 1988
ITEM
PART NO.
QTY.
DESCRIPTION
0656460200
0656460220
0656460210
37107B13
0656460230
65107A4
OUTBOARD SPRING ASSY
ROCKER ARM WLD
SPRING BASE WLD
CLIP-X HAIR PIN
PIN-WLD
GUIDE SPRING
1
2
3
4
5
6
7
8
9
10
1
1
2
1
1
1
1
1
1
1
371063A
SPRING
00037200
02023800
0656460240
00002701
NUT TOPLOCK 3/4 NC PLC
HEXB 3/4 NC 6-1/2PL
WLDMT-PIN
FLATWASHER,3/4,TYPE AW,ZP
Note: These sere not used on units with hyd level lift. See level lift section for spring assy’s used
FS15 Master Parts Book (July-05)
©2005 Alamo Group Inc.
Parts Section – 71
Download from Www.Somanuals.com. All Manuals Search And Download.
TIRE/WHEEL ASSEMBLY S/N 00101 - 10429 OCT 1977 - MAY 1988
ITEM
PART NO.
QTY.
DESCRIPTION
1
1
2
00008700
00019200
00025200
00749700
1
1
1
WHEEL, 15 X 5.00 DC (RIM ONLY)
WHEEL 14 X 5.00 DC (RIM ONLY)
LAMINATED PUNCTURE-PROOF TIRE & WHEEL ASSEMBLY (21" OD) 6.00 X 9
14" AIRPLANE TIRE AND WHEEL
ALSO AVAILABLE
Used 14" Airplane Tire and Wheel - P/N 00749700 (not shown)
FS15 Master Parts Book (July-05)
©2005 Alamo Group Inc.
Parts Section – 72
Download from Www.Somanuals.com. All Manuals Search And Download.
TONGUE ASSEMBLY S/N 00101 - 10429 OCT 1977 - MAY 1988
ITEM
PART NO.
QTY.
DESCRIPTION
1
2
3
B65105
651051
0656050200
651052
0656050300
651053
1
1
1
1
1
1
2
2
1
6
3
2
TONGUE
WLDMT, TONGUE
WLDMT, TONGUE HITCH, FS15 PART
CLEVIS, TONGUE
TNG-HITCH CONT ROD
ROD HITCH CONTROL
PIN-TONGUE PIVOT
C/S 3/4 X 2 1/2 NF 5
HHCS 3/4 NF 3 PL5
C/S 3/4 X 4 1/2 NF 5
NUT TOPLOCK 3/4 NF PLB
PIN-COTTER 3/16 X 2
4
5
6
651054
7AH5121620
00752161
7AH5121636
00748539
00606000
7
8
Note: Item #6 has ears cast on to it. Check before ordering. Item #5 bronze bushing
FS15 Master Parts Book (July-05)
©2005 Alamo Group Inc.
Parts Section – 73
Download from Www.Somanuals.com. All Manuals Search And Download.
TORQUE LIMITER ASSEMBLY S/N 00101 - 10001 OCT 1977 - AUG 1987
ITEM
PART NO.
QTY.
DESCRIPTION
70105
701052
TORQUE LIMITER ASSY
DRIVE PLATE
PLATE,PRESSURE
DISC,CLUTCH
HUB, TORQUE LIMITER
BUSHING
NUT ADJ TOPLOCK
SPRING, BELLEVILLE
PLUG BRONZE
1
2
3
4
5
6
7
8
9
10
1
1
2
1
1
1
4
1
1
1
00748832
00748833
701054R
00748825
701055R
00748831
701053R
9C16163
00748834
SHSS CUP POINT 3/8NC X 3/8 PL
BACK PLATE
Note: Item #7 is hex shaped nut. Check before ordering.
Notice: Most Parts are interchangeable with the Warner-Motive Torque Limiter (70105). To prevent damage to the
assembly, do not use or mix 0731070006 spring together with 701056 spring on the sam assemly. Also, replacement of
the disc and spring with Warner parts will lower the capacity of the
FS15 Master Parts Book (July-05)
©2005 Alamo Group Inc.
Parts Section – 74
Download from Www.Somanuals.com. All Manuals Search And Download.
TORQUE LIMITER ASSEMBLY S/N 10001 - 10429 AUG 1987 - MAY 1988
ITEM
PART NO.
QTY.
DESCRIPTION
0731070000
00748829
00748834
0731070003
0731070004
0731070005
0731070006
0731070007
TORQUE-LIMITER 3SPG
HUB
BACK PLATE
DISK, FRICTION
PLATE,DRIVE
PLATE, PRESSURE
SPRING, BELLVILLE
NUT, ADJUSTING
1
2
3
4
5
6
7
1
1
2
1
1
3
1
FS15 Master Parts Book (July-05)
©2005 Alamo Group Inc.
Parts Section – 75
Download from Www.Somanuals.com. All Manuals Search And Download.
WEIGHT BOX S/N 00101 - 10429 OCT 1977 - MAY 1988
ITEM
PART NO.
QTY.
DESCRIPTION
1
2
3
4
5
6
7
8
9
10
0656390100
0656390300
12BF6168
00012101
00757359
7A121016
00003901
00000200
15B1200
1
1
6
6
1
1
1
1
1
1
WEIGHT BOX WELD
COVER
SCREW 3/8 X 1 NC
LOCKWASHER 3/8 PL HVY
BRACE STRAP
C/S 3/4 X 2 NC ZP
LOCKWASHER 3/4 PL HEAVY
NUT 3/4 NC HEX PL
WASHER 3/4 P SAE
PIN
20A4012E
FS15 Master Parts Book (July-05)
©2005 Alamo Group Inc.
Parts Section – 76
Download from Www.Somanuals.com. All Manuals Search And Download.
WINCH AND STAND ASSSEMBLY S/N 00101 - 10429 OCT 1977 - MAY 1988
ITEM
PART NO.
QTY.
DESCRIPTION
1
2
3
4
5
6
7
8
0656200100
00011400
00748823
15B600
00012101
00001300
00013901
00001200
B651202
651202
1
3
2
1
3
2
3
2
1
1
1
1
2
STAND WINCH FS15
HHCS 3/8 NC 1 PL5
HHCS 1/2-13UNC 1-1/2 PL5
WASHER 3/8 SAE P
LOCKWASHER 3/8 PL HVY
LOCKWASHER 1/2 PL STD
NUT HEX 3/8 NC PL
NUT,HEX 1/2 NC PL
WINCH & CABLE
9
10
11
12
13
WINCH
651203
65111
37107B13
CABLE, 1/4 AIRCRAFT W/THIMBLE
BAR, TRANSPORT
CLIP-X HAIR PIN
Note: this winch will fit and work in place of all previous winches with no modifications.
FS15 Master Parts Book (July-05)
©2005 Alamo Group Inc.
Parts Section – 77
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
SERVIS-RHINO
LIMITED WARRANTY
1. LIMITED WARRANTIES
1.01.Servis-Rhino warrants for one year from the purchase date to the original non-commercial, governmental, or municipal
purchaser (“Purchaser”) and warrants for six months to the original commercial or industrial purchaser (“Purchaser”)
that the goods purchased are free from defects in material or workmanship.
1.02.Manufacturer will replace for the Purchaser any part or parts found, upon examination at one of its factories, to be
defective under normal use and service due to defects in material or workmanship.
1.03.This limited warranty does not apply to any part of the goods which has been subjected to improper or abnormal use,
negligence, alteration, modification, or accident, damaged due to lack of maintenance or use of wrong fuel, oil, or
lubricants, or which has served its normal life. This limited warranty does not apply to any part of any internal
combustion engine, or expendable items such as blades, shields, guards, or pneumatic tires except as specifically found
in your Operator’s Manual.
1.04.Except as provided herein, no employee, agent, Dealer, or other person is authorized to give any warranties of any
nature on behalf of Manufacturer.
2. REMEDIES AND PROCEDURES.
2.01.This limited warranty is not effective unless the Purchaser returns the Registration and Warranty Form to Manufacturer
within 30 days of purchase.
2.02.Purchaser claims must be made in writing to the Authorized Dealer (“Dealer”) from whom Purchaser purchased the
goods or an approved Authorized Dealer (“Dealer”) within 30 days after Purchaser learns of the facts on which the
claim is based.
2.03.Purchaser is responsible for returning the goods in question to the Dealer.
2.04.If after examining the goods and/or parts in question, Manufacturer finds them to be defective under normal use and
service due to defects in material or workmanship, Manufacturer will:
(a) Repair or replace the defective goods or part(s) or
(b) Reimburse Purchaser for the cost of the part(s) and reasonable labor charges (as determined by Manufacturer)
if Purchaser paid for the repair and/or replacement prior to the final determination of applicability of the warranty
by Manufacturer.
The choice of remedy shall belong to Manufacturer.
2.05.Purchaser is responsible for any labor charges exceeding a reasonable amount as determined by Manufacturer and
for returning the goods to the Dealer, whether or not the claim is approved. Purchaser is responsible for the trans-
portation cost for the goods or part(s) from the Dealer to the designated factory.
3. LIMITATION OF LIABILITY.
3.01.MANUFACTURER DISCLAIMS ANY EXPRESS (EXCEPT AS SET FORTH HEREIN) AND IMPLIED WARRANTIES
WITH RESPECT TO THE GOODS INCLUDING, BUT NOT LIMITED TO, MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE.
3.02.MANUFACTURER MAKES NO WARRANTY AS TO THE DESIGN, CAPABILITY, CAPACITY, OR SUITABILITY FOR
USE OF THE GOODS.
3.03.EXCEPT AS PROVIDED HEREIN, MANUFACTURER SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO
PURCHASER OR ANY OTHER PERSON OR ENTITY WITH RESPECT TO ANY LIABILITY, LOSS, OR DAMAGE
CAUSED OR ALLEGED TO BE CAUSED DIRECTLY OR INDIRECTLY BY THE GOODS INCLUDING, BUT NOT
LIMITED TO, ANY INDIRECT, SPECIAL, CONSEQUENTIAL, OR INCIDENTAL DAMAGES RESULTING FROM
THE USE OR OPERATION OF THE GOODS OR ANY BREACH OF THIS WARRANTY. NOT WITHSTANDING THE
ABOVE LIMITATIONS AND WARRANTIES, MANUFACTURER’S LIABILITY HEREUNDER FOR DAMAGES
INCURRED BY PURCHASER OR OTHERS SHALL NOT EXCEED THE PRICE OF THE GOODS.
3.04.NO ACTION ARISING OUT OF ANY CLAIMED BREACH OF THIS WARRANTY OR TRANSACTIONS UNDER
THIS WARRANTY MAY BE BROUGHT MORE THAN TWO (2) YEARS AFTER THE CAUSE OF ACTION HAS
OCCURRED.
4. MISCELLANEOUS.
4.01.Proper Venue for any lawsuits arising from or related to this limited warranty shall be only in Guadalupe County,
Texas.
4.02.Manufacturer may waive compliance with any of the terms of this limited warranty, but no waiver of any terms shall
be deemed to be a waiver of any other term.
4.03.If any provision of this limited warranty shall violate any applicable law and is held to be unenforceable, then the
invalidity of such provision shall not invalidate any other provisions herein.
4.04.Applicable law may provide rights and benefits to purchaser in addition to those provided herein.
KEEP FOR YOUR RECORDS
ATTENTION: Purchaser should fill in the blanks below for his reference when buying repair parts and/or for proper machine
identification when applying for warranty.
Servis-Rhino Implement Model _______________________________ Serial Number ________________________________
Date Purchased __________________________________________ Dealer ______________________________________
®
ATTENTION:
READ YOUR OPERATOR'S MANUAL
RHINO
1020 S. SangamonAve.
Gibson City, IL60936
800-446-5158
Email: [email protected]
Download from Www.Somanuals.com. All Manuals Search And Download.
TO THE OWNER/OPERATOR/DEALER
Tokeepyourimplementrunningefficientlyandsafely,readyourmanualthoroughlyandfollowthesedirectionsand
the Safety Messages in this Manual. The Table of Contents clearly identifies each section where you can easily
find the information you need.
The OCCUPATIONAL SAFETY AND HEALTH ACT (1928.51 Subpart C) makes these minimum safety
requirementsoftractoroperators:
REQUIREDOFTHEOWNER:
1. Provide a Roll-Over-Protective Structure that meets the requirements of this Standard; and
2. Provide Seatbelts that meet the requirements of this paragraph of this Standard and SAE J4C; and
3. Ensure that each employee uses such Seatbelt while the tractor is moving; and
4. Ensure that each employee tightens the Seatbelt sufficiently to confine the employee to the protected
area provided by the ROPS.
REQUIREDOFTHEOPERATOR
1. Securely fasten seatbelt if the tractor has a ROPS.
2. Where possible, avoid operating the tractor near ditches, embankments, and holes.
3. Reduce speed when turning, crossing slopes, and on rough, slick, or muddy surfaces.
4. Stay off slopes too steep for safe operation.
5. Watch where you are going - especially at row ends, on roads, and around trees.
6. Do not permit others to ride.
7. Operate the tractor smoothly - no jerky turns, starts, or stops.
8. Hitch only to the drawbar and hitch points recommended by the tractor manufacturer.
9. When the tractor is stopped, set brakes securely and use park lock, if available.
Keep children away from danger all day, every day...
Equip tractors with rollover protection (ROPS) and keep all machinery
guards in place...
Please work, drive, play and live each day with care and concern for
your safety and that of your family and fellow citizens.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
FS15
PL 07-05
P/N 00773425MB
Printed U.S.A.
Download from Www.Somanuals.com. All Manuals Search And Download.
|