EM 3532-U
Instructions for use
Download from Www.Somanuals.com. All Manuals Search And Download.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter
Contents ............................................................................................................................. Page
1
Brief description, special features ........................................................................... 40
Connections and operating elements ..................................................................... 41
Noise reduction with HiDyn plus™ .......................................................................... 42
Diversity reception .................................................................................................. 43
Assembly and mounting, assembly instructions ................................................... 44
Connection and mounting of remote antennæ...................................................... 46
Selecting the mains voltage / Mains connection.................................................... 47
Putting the EM 3532 into operation...................................................................... 48
Basic functions of the Sennheiser operating menu ............................................... 49
Menus / Overview................................................................................................... 50
LC display panel ..................................................................................................... 51
Setting a receiving frequency, allocating a frequency memory and
2
3
4
5
6
7
8
9
10
11
12
assigning a channel number ................................................................................... 52
Deleting a receiving frequency, emptying a frequency memory.......................... 54
Setting the receiving frequency via the channel number...................................... 55
Squelch (Muting) ..................................................................................................... 56
Advanced muting function ..................................................................................... 57
Automatic transmitter search tuning – Scan function .......................................... 58
Adding a supply voltage for antenna boosters ...................................................... 60
Stand-by operation .................................................................................................. 61
Remote control ........................................................................................................ 62
Power of the received RF signal ............................................................................. 63
Monitoring the sound signal, headphone connection .......................................... 64
Replacing a fuse....................................................................................................... 65
Sennheiser transmitters report their battery status ............................................... 66
Suitable Sennheiser transmitters ............................................................................ 67
Error checklist ......................................................................................................... 68
Safety instructions ................................................................................................... 68
Recommended accessories...................................................................................... 69
Technical Data ......................................................................................................... 70
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Thank you for choosing Sennheiser!
We have designed this product to give you reliable operation over many years.
Please take a few moments to read these instructions carefully, as we want you to enjoy your new
Sennheiser product quickly and to the full.
1
Brief description
With the EM 3532-U twin receiver, Sennheiser offers the professional user a high-quality state-of-
the-art RF receiver with a high level of operational reliability and ease of use. The EM 3532-U
receiver together with the suitable hand-held and pocket transmitters permits wireless transmission
with studio-quality sound. Due to further optimised PLL and microprocessor technology and the
Sennheiser patented HiDyn plus™ noise reduction system, these transmission systems surpass the
signal-to-noise ratio and dynamic range of modern CD productions. The true diversity technology
of the EM 3532-U receiver ensures interference-free transmission and minimises dropouts in the
RF link.
Especially for small television studios and theatres, the simultaneous use of several Sennheiser
3000 series receivers – such as the EM 3532-U – is an economical alternative to technically more
sophisticated and therefore more expensive multi-channel systems of the 5000 series.
Special features
ț
ț
ț
ț
ț
PLL microprocessor control, programmable
Sennheiser HiDyn plus™ noise reduction system
High transmission reliability due to true diversity reception
Ease of use due to menu-assisted operation
Indication of transmitter battery status and “LOW BATT” warning
(only with Sennheiser transmitters transmitting battery status information)
ț
ț
ț
ț
ț
Rugged 19” 1 U metal housing
Disconnectable supply voltage for external antenna boosters
Remote-controllable via PC with S-MCD software
External DC supply 11–18 Volt
Advanced scan function / transmitter search tuning
40
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Connections and operating elements
ᕡ
ᕢ
ᕣ
ᕤ
ᕥ
ᕦ
ᕧ
ᕨ
ᕩ
µ
¸
¹
Ƹ
ƹ
ƺ
Headphone socket 1/4 ” (6.3 mm) ø
Headphone volume control
Multi-function LC display panel
Buttons for selecting and programming the menus
SET/storage button
ON / OFF switch
Fuse holder and mains voltage selection
2-pin IEC mains connector
Cable grip for mains cable
Data interface for connecting a remote computer
AF output XLR-3M, balanced
Control for the AF output level at the XLR socket ¸
Antenna input B
DC socket (e.g. for use in an OB van)
Antenna input A
41
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Noise reduction with HiDyn plus™
Progress you can hear:
This receiver is equipped with HiDyn plus™, the Sennheiser noise reduction system that reduces RF
interference. It increases the signal-to-noise ratio in wireless audio transmission to up to 110 dB.
The 96 dB dynamic range of a CD is thus considerably surpassed.
HiDyn plus™ is a wideband compander system which compresses the AF level on the transmitter
side in a ratio of 2:1 (related to dB), and expands it in exactly the same way on the receiver side.
The optimisation of the dynamic range and the supporting effect of the control amplifier in the
transmitter effectively reduce modulation problems.
HiDyn plus™ has been specially developed for use in high quality radiomicrophone systems.
Note
Only transmitters which are also equipped with HiDyn plus™ can work correctly in
combination with the EM 3532-U receiver. If this is not the case, the dynamic
range is drastically reduced and the transmission sounds blunt and flat. HiDyn plus™
cannot be switched off on the EM 3532 receiver.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
AF-signal
AF-signal
receiver 1
receiver 2
electronic switching
from one signal to another
4
Diversity reception
The EM 3532 receiver operates on the “true diversity” principle:
A receiving antenna receives not only the electromagnetic waves which reach it by a direct path,
but also the reflections of these waves which are created in the room by walls, windows, ceilings
and fittings. When these waves are superimposed, destructive interference occurs, which can also
be called “field strength gaps”. Repositioning the receiving antenna can bring a solution, provided
the transmitter remains in its original position. With mobile transmitters, however (which all
radiomicrophones are ), the “field strength gap“ will then occur with a different transmitter position.
These “field strength gaps“ can only be eliminated with true diversity receivers.
In true diversity, instead of one antenna and one receiver there are now two antennæ and two
receiver sections. The antennæ are spatially separated. By means of a comparison circuit, the
receiver section with the strongest RF signal is always switched to the common AF output. The
risk of the occurrence of “field strength gaps” in both antennæ at the same time is virtually
nonexistant.
The display panel of the receiver always shows whether the diversity channel switched is channel
A or channel B.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Assembly and mounting
Use as a stand-alone receiver
When using the EM 3532 as a stand-alone receiver, it is easiest to use the supplied telescopic
antennæ. They can be mounted quickly and easily to the rear of the receiver and are suitable for
all applications where – good reception conditions provided – a wireless transmission system is to
be used without a large amount of installation work. The best reception quality, however, is obtained
by using remote antennæ (see chapter 6).
To ensure that the receiver is securely mounted
on a surface on which it cannot slip, four self-
adhesive soft rubber feet are supplied. These feet
are stuck into the recesses on the lower side of
the receiver.
Ensure that the recesses are clean and free from
grease before mounting the feet.
Note
Do not use these feet if rack-mounting
the receiver.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Mounting the receiver into a rack
With the two supplied rack mount “ears”, the receiver can be mounted into a 19” rack (1 U). The
rack mount “ears” are screwed to the receiver on the left and right ቢ.
Note
If you wish to connect the antennæ to the front side, you must pull the cables of the
GA 3030-AM antenna mount through the holes on the rack mount “ears” before
mouting the “ears” ቤ.
The GA 3030-AM antenna mount (accessory, see chapter 28) allows the antennæ to be connected
to the front of the receiver, for example if the rear of the rack is closed.
Mount the antenna holders to the right and left to the handles of the receiver ባ. The connection
cables, which are firmly fixed to the antenna holders, are connected to the antenna sockets on the
rear of the receiver.
Assembly instructions
ț
ț
Do not place the receiver in direct proximity to digitally controlled devices!
Site the receiver as high as possible so that the receiving antennæ have a
“free line of sight” to the transmitter antennæ!
45
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Connection and mounting of remote antennæ
If the receiver position is not the best antenna position for optimum reception, you can use remote
antennæ and antenna boosters. These are available as accessories.
The best reception quality is obtained with the Sennheiser A12 AD-UHF active antenna. Antenna
and receiver can be connected with RG 58 co-axial cable. Ready made up antenna cables from
Sennheiser are available as accessories with lengths of 1 m, 5 m and 10 m (see chapter 28).
Ǡ
Ǡ
To supply the antenna booster integrated in the A12 AD-UHF active antenna, a
supply voltage needs to be added via the antenna sockets (see chapter 18).
External AB 1036-TV antenna boosters can be used for compensating for cable
losses if the remote antennæ are at a long distance from the receiver. The antenna
boosters are connected in the antenna cable line and can be supplied with the DC
supply voltage by the EM 3532 via the antenna cables.
Essential notes on mounting the antennæ
ț
ț
Position antennæ in the same room in which the transmission takes place!
Maintain a minimum distance of 1 metre from metal objects (including
reinforced concrete walls)!
ț
Maintain a minimum distance of 1 metre between receiving antennæ!
46
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Selecting the mains voltage
Before you plug the mains connector into the mains, please check first of all
that the receiver is set to the correct mains voltage!
You can change the mains voltage by removing the fuse holder ᕧ with the inserted fuse ቢ,
turning it through 180° ባ and inserting it again ቤ. The set voltage can be seen at the top of the
fuse holder.
Mains connection
Insert the supplied mains cable into socket ᕨ on the receiver and pass the cable through the cable
grip ᕩ.
Because of the cable grip, the cable cannot slip out of socket ᕨ and interrupt operation.
Note
A cable grip is particularly important when the receiver is permanently rack
mounted. Inside the rack there are often a large number of cables - a cable grip
prevents the cables from pulling each other out.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Putting the EM 3532 into operation
The receivers are switched on separately with the ON / OFF switches ². The respective display
panel » is now lit up to show that the receiver is switched on, and the standard display is shown
(see chapter 11). The display “MUTE” ቢ (see chapter 15) lights up, and the RF field strength is
indicated. If a suitable transmitter is already operating on this frequency, the display “MUTE” is
initially lit up for about two seconds. Then the deviation is indicated ባ (modulation, see chapter
21), and the diversity branch in use is now displayed for the first time (see chapter 4).
After approx. ten more seconds, the battery status display indicates the (remaining) capacity of the
transmitter’s battery or rechargeable accupack, provided the transmitter in use transmits a battery
status signal (see chapter 24).
Note
The ON / OFF switch ² works in the secondary circuit of the integrated mains
transformer, and thus only switches the low voltage side. By using a modern magnetic
1
core transformer, the power consumption of a receiver of approx. /2 Watt when
switched off is extremely low. For larger installations with several receivers, a
complete mains disconnection can best be achieved by an additional common
ON / OFF switch.
The AF connection is via sockets ¸ on the rear. The controls ¹ control the AF signal output
level.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Basic functions of the Sennheiser operating menu
A special feature of the Sennheiser 3000 series is the similar operation of transmitters and receivers.
In stressfull situations, for example on stage or during a live show or presentation, it is important
that the receiver is easy to operate and that adjustments to the receiver settings can be made
quickly and “without looking”. Therefore, the necessary operating steps for each device must be
similar.
ᕡ
Press the ̃/̅ buttons to select a menu:
By briefly pressing the ̃/̅ buttons, you can jump either forwards or backwards to the
next menu. Your selection is indicated by the corresponding LC dot on the right of the
display panel ᕣ.
ᕢ
Press the SET button to get into the setting mode:
If you now press the SET button, the corresponding display on the display panel begins to
flash, indicating that you are in the setting mode of the selected menu.
ᕣ
ᕤ
Press the ̃/̅ buttons to adjust the settings of the selected menu.
Press the SET button to store the setting:
To store a setting, press the SET button until “Sto” briefly appears on the display, indicating
that your setting has been stored. The display then switches back to the standard display.
Important: Only now is your setting stored!
Ǡ
If you do not press the ̃/̅ buttons or the SET button for more than 30 seconds, the
setting mode is automatically left and the display switches back to the standard display.
You can discontinue your preselection by briefly (!) pressing the SET button. The display
briefly indicates “ESC” and then switches back to the standard display.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
10 Menus / Overview
FREQUENCY
indicates the current receiving frequency.
(ꢀ chapter 12)
CHANNEL
indicates the currently assigned channel number.
(ꢀ chapter 14)
SQUELCH
indicates the squelch threshold.
(ꢀ chapter 15)
SCAN
scans for available RF signals, the receiving frequency
found is shown on the display.
(ꢀ chapter 17)
BOOSTER FEED
indicates whether the supply voltage for active
antennæ or antenna boosters is switched on or
off. (ꢀ chapter 18)
STANDBY
indicates whether the receiver is set to stand-by
operation. All menus – except for “REMOTE” and
“STANDBY” – are then locked. (ꢀ chapter 19).
REMOTE
indicates whether the receiver is set for “computer
remote control only”. (ꢀ chapter 20).
50
Download from Www.Somanuals.com. All Manuals Search And Download.
11 LC display panel
ᕡ ᕢ ᕣ ᕤ ᕥ
ᕦ
ᕧ
ᕨ
ᕩ µ ¸ ¹
Ƹ
ᕡ
Display for the “FREQUENCY” menu. This display can be the receiver’s standard display
which always appears after switch-on.
ᕢ
ᕣ
Display for the “BOOSTER FEED” menu.
Display for the “CHANNEL” menu. This display can also be the receiver’s standard
display which always appears after switch-on.
ᕤ
ᕥ
ᕦ
ᕧ
Display for the “STANDBY” menu.
Alphanumeric main display, indicates the settings that can be adjusted in the menus.
Ten-step bargraph for the received RF signal, with overmodulation display (Peak).
Ten-step bargraph for the received AF signal,
with overmodulation display (Peak) and “peak hold”.
ᕨ
Six-step bargraph for the transmitter battery status (in %) and
“LOW BATT” display if transmitter battery is going flat.
ᕩ
µ
¸
¹
Ƹ
Antenna A is currently receiving (diversity selection).
Display for the “REMOTE” menu.
Reception is muted, “MUTE”.
Antenna B is currently receiving (diversity selection).
Menu selection with display via LC dots.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
12 Setting a receiving frequency, allocating a frequency memory and
assigning a channel number
The EM 3532 receiver has a switchable frequency memory to store a maximum of 32 receiving
frequencies with their respective channel numbers. The storing procedure is similar for each entry or
modification:
Ǡ
Press the ̃/̅ buttons to select the “FREQUENCY” menu. Then press the SET button. The
“FREQUENCY MHZ” display on the display panel ᕣ begins to flash:
Ǡ
With the ̃/̅ buttons you can now select a different frequency.
The display jumps to the next frequency in 5-kHz steps:
Ǡ
When you get to the desired frequency, press the SET button until “Sto” briefly appears on
the display.
Ǡ
You now have to check whether the frequency memory (nos. 1 to 32) is allocated correctly.
The display indicates the receiving channel with the allocated frequency memory, and the
“CHANNEL” display lights up. The display for the frequency memory begins to flash.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Ǡ
With the ̃/̅ buttons you can now select a frequency memory (nos. 1 to 32). If the
frequency memory has been assigned a channel number, this is also indicated. If no channel
number has been assigned, three “hyphens” appear on the display, indicating that the frequency
memory is empty (see chapter 13).
Ǡ
Have you set the frequency memory correctly? Press the SET button until “Sto” briefly
appears on the display.
Ǡ
You now have to assign the frequency memory a channel number (from 001 to 255). With
larger systems, it is recommended to use the same channel numbers for both transmitters
and receivers in order to provide for simpler monitoring of the system. With the ̃/̅
buttons you can now select the desired channel number:
Ǡ
Have you set the channel number correctly? Press the SET button until “Sto” briefly appears
on the display. The display then switches back to the standard display.
Only now does the receiver change to the new frequency / channel.
For some countries, this menu is locked via a special configuration program, since not all tunable
receiving frequencies are approved in these countries. If the “FREQUENCY” menu is selected, “Loc”
appears on the display.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
13 Deleting a receiving frequency, emptying a frequency memory
Ǡ
You can empty a frequency memory if you enter three “hyphens” when assigning a channel
number.
Ǡ
The last frequency stored cannot be deleted. If you try to delete the last frequency stored,
the display briefly indicates “LASt” and then switches back to the standard display.
You can discontinue the programming of this menu by briefly (!) pressing the SET button. The
display briefly indicates “ESC” and then switches back to the standard display. The previous settings
are kept.
If you do not press any of the three programming buttons for more than 30 seconds, the setting
mode is automatically left. The display briefly indicates “ESC” and then switches back to the
standard display. The previous settings are kept.
For some countries, this menu is locked via a special configuration program, since not all tunable
receiving frequencies are approved in these countries. If the “FREQUENCY” menu is selected, “Loc”
appears on the display.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
14 Setting the receiving frequency via the channel number
In the “CHANNEL” menu, you can directly change from one stored receiving frequency to the next.
Ǡ
Press the ̃/̅ buttons to select the “CHANNEL” menu. Then press the SET button. The
“CHANNEL” display on the display panel ᕣ begins to flash:
The display indicates the receiving frequency in alternation with the channel number.
Ǡ
With the ̃/̅ buttons you can now select a different channel. The display jumps either
forwards or backwards to the next channel. The next channel is not necessarily identical
with the next channel number assigned!
The display indicates the new channel in alternation with the receiving frequency assigned.
Note
If you have reached the first or the last frequency memory, the display briefly indicates
“EndtAb”. Continue with your selection in the opposite direction.
Ǡ
Have you selected the desired channel? Press the SET button until “Sto” briefly appears on
the display. The display then switches back to the standard display.
Only now does the receiver change to the new frequency / channel.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
15 Squelch (Muting)
The EM 3532 receiver is equipped with an adjustable squelch which eliminates annoying noise
when the transmitters are switched on and off. It also suppresses sudden noise when a transmitter
leaves the reception area and there is no longer sufficient transmitter power received by the receiver.
The adjustment of the squelch is via the “SQUELCH” menu. The adjustment range is between 0
and 134 (on the display), which corresponds to 0 to up to 100 μV. When the squelch is active, the
display “MUTE” is lit up on the display panel. If set to position “0”, the squelch is switched off.
Ǡ
Press the ̃/̅ buttons to select the “SQUELCH” menu. Then press the SET button. The LC
dot on the left of the text SQUELCH begins to flash and the current value of the squelch
is shown on the alphanumeric main display and in the deviation bargraph. For the exact
value in μV please refer to the RF level bargraph on the left of the deviation bargraph:
Ǡ
Ǡ
With the ̃/̅ buttons you can now select a squelch threshold between 0 and 134.
Only after having been stored does the new squelch treshold become effective. To store a
setting, press the SET button until “Sto” briefly appears on the display, indicating that your
setting has been stored. The display then switches back to the standard display.
You can discontinue the programming of this menu by briefly (!) pressing the SET button. The
display briefly indicates “ESC” and then switches back to the standard display. The previous settings
are kept.
If you do not press any of the three programming buttons for more than 30 seconds, the setting
mode is automatically left. The display briefly indicates “ESC” and then switches back to the
standard display. The previous settings are kept.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
16 Advanced muting function
This receiver also features AMF (Advanced Muting Function). This special electronic feature
comes into effect when an RF signal drops by about 40 dB in a short time. The reception is then
muted for at least three seconds. AMF thus suppresses the annoying switch-off click when a
transmitter is switched off. Because of the delay in switching on again, the PLL circuit of the
transmitter has enough time to adjust itself back to the corresponding transmission frequency.
Example
One possible area of use for AMF is the inaudible change of a hand-held transmitter.
If the battery of the first transmitter has run down (display “LOW BATT” on the
receiver), a second transmitter is prepared on the same frequency: insert battery,
select transmission channel. Then the first transmitter is switched off, AMF switches
to mute and the second transmitter is switched on. The PLL of transmitter 2 stabilises
itself, AMF switches on again. The whole procedure takes place inaudibly in the
background while AMF is switched to mute. Without AMF, the switching off,
switching on and stabilising of the transmission frequency would have been audible
in the form of possible crackles and whistling noises.
AMF can be switched off. As it is coupled with the setting of the normal squelch, its function is
cancelled if the squelch is set to position “0” (see chapter 15).
57
Download from Www.Somanuals.com. All Manuals Search And Download.
17 Automatic transmitter search tuning – Scan function
The EM 3532 receiver features a scan function to scan the frequency range of the tuner for a
transmitter.
For some countries, this menu is locked via a special configuration program, since not all tunable
receiving frequencies are approved in these countries. If the “SCAN” menu is selected, “Loc” appears
on the display.
Ǡ
Press the ̃/̅ buttons to select the “SCAN” menu. “SCAn” appears on the display:
Then press the SET button. The current receiving frequency set appears on the display,
and the “FREQUENCY MHZ” display as well as the LC dot on the left of the text SCAN begin
to flash.
Ǡ
With the ̃/̅ buttons you can now start the transmitter search tuning either upwards or
downwards. During transmitter search tuning, the display indicates:
or:
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Ǡ
If no transmitter is found, the search tuning stops at the upper or lower limit of the
24 MHz frequency window. The display then indicates:
Ǡ
If a transmitter with a strong enough RF signal (higher than the squelch level, but at least
5 μV) is found, this frequency is indicated on the display. In addition, the deviation and the
RF level of the received signal are indicated via the bargraphs. You can now monitor the
sound signal with headphones.
Information on how to store the new receiving frequency is given in chapter 12.
Note
If you wish to acquire data from your transmitters in use via this menu, the
modulation of the transmitters must not be too high, otherwise frequency deviations
may occur. The solution to this problem is simple: do not talk into the transmitter
when the search tuning is activated. In general, it is best to put the transmitter
down!
You can discontinue the programming of this menu by briefly (!) pressing the SET button. The
display briefly indicates “ESC” and then switches back to the standard display. The previous settings
are kept.
Note
In this menu, the display does not switch back to the standard display after 30
seconds. The search tuning between the two limits of the frequency window takes
about 12 – 15 seconds, and you should have time enough to write the new frequency
down or to compare it with a frequency table.
Ǡ
Press the SET button to leave this menu!
59
Download from Www.Somanuals.com. All Manuals Search And Download.
18 Adding a supply voltage for antenna boosters
Antenna boosters can be connected to the antenna inputs of the EM 3532 receiver and can be
supplied by the receiver via the antenna cables. The supply voltage can be switched on or off. Both
receivers in the EM 3532 should be set to the same setting, i.e. both receiver should be set to either
“On” or “OFF”!
Ǡ
Press the ̃/̅ buttons to select the “BOOSTER FEED” menu. The current setting – i.e. “On”
or “OFF” – is indicated on the display.
Then press the SET button. The “BOOSTER FEED” display on the display panel begins to
flash.
You can now select your desired setting:
Ǡ
Press the ̅ button to switch on the booster supply voltage, “On” appears on the display:
Ǡ
Press the ̃ button to switch off the booster supply voltage, “OFF” appears on the display:
Ǡ
Your setting has to be stored before it becomes effective. To store a setting, press the SET
button until “Sto” briefly appears on the display, indicating that your setting has been
stored. The display then switches back to the standard display.
If the booster supply voltage is switched on, the “BOOSTER FEED” display on the display
panel is lit up.
You can discontinue the programming of this menu at any time by briefly (!) pressing the
SET button. The previous setting is then kept. If you do not press any of the three
programming buttons for more than 30 seconds, the setting mode is automatically left and
the previous setting is also kept.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
19 Stand-by operation
The EM 3532 receiver can be set to stand-by operation. During stand-by operation, information
from the RF section is no longer processed and the AF section is muted (MUTE). All other menus
– except for “REMOTE” and “STANDBY” – are locked. If you try to select any other menu, “Loc”
appears on the display.
Ǡ
Press the ̃/̅ buttons to select the “STANDBY” menu. The current setting – i.e. “On” or
“OFF” – is indicated on the display.
Then press the SET button. The “STANDBY” display on the display panel begins to flash.
You can now select your desired setting:
Ǡ
Press the ̅ button to switch on the stand-by operation, “On” appears on the display:
Ǡ
Press the ̃ button to switch off the stand-by operation, “OFF” appears on the display:
Ǡ
Your setting has to be stored before it becomes effective. To store a setting, press the SET
button until “Sto” briefly appears on the display, indicating that your setting has been
stored. The display then switches back to the standard display.
If the receiver is set to stand-by operation, the “STANDBY” display on the display panel is lit
up.
You can discontinue the programming of this menu at any time by briefly (!) pressing the
SET button. The previous setting is then kept. If you do not press any of the three
programming buttons for more than 30 seconds, the setting mode is automatically left and
the previous setting is also kept.
61
Download from Www.Somanuals.com. All Manuals Search And Download.
20 Remote control
The EM 3532 receiver can be set for “computer remote control only”. When set for remote control,
all other menus – except for “REMOTE” – are locked. If you try to select any other menu, “Loc”
appears on the display.
Ǡ
Press the ̃/̅ buttons to select the “REMOTE” menu. The current setting – i.e. “On” or
“OFF” – is indicated on the display.
Then press the SET button. The “REMOTE” display on the display panel begins to flash.
You can now select your desired setting:
Ǡ
Press the ̅ button to switch on the remote control, “On” appears on the display:
Ǡ
Press the ̃ button to switch off the remote control, “OFF” appears on the display:
Ǡ
Your setting has to be stored before it becomes effective. To store a setting, press the SET
button until “Sto” briefly appears on the display, indicating that your setting has been
stored. The display then switches back to the standard display.
If the receiver is set to remote control, the “REMOTE” display on the display panel is lit up.
You can discontinue the programming of this menu at any time by briefly (!) pressing the
SET button. The previous setting is then kept. If you do not press any of the three
programming buttons for more than 30 seconds, the setting mode is automatically left and
the previous setting is also kept.
62
Download from Www.Somanuals.com. All Manuals Search And Download.
ቢ
ባ
21 Power of the received RF signal
In display panel ᕣ, the power of the received RF signal ቢ (in μV) and the level control of the AF
signal (in %) ባ – i.e. the modulation of the RF signal – are shown. Both displays have an
overmodulation display. If the signal is too high, “PEAK” lights up briefly. Short overmodulation is
not critical. Where longer overmodulation occurs, the modulation of the corresponding transmitter
must be reduced. For the AF signal, “peak hold” is also shown, which means that short peaks
remain visible for some time.
Note
If, with multi-channel systems (more than tree channels), the overmodulation display
(“PEAK”) for the AF signal ባ lights up during normal operation, the RF level
should be reduced at the receivers in order to avoid intermodulation interference.
In this case, increase the distance between receiving antennæ and transmitters or
use attenuators in the antenna inputs.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
22 Monitoring the sound signal, headphone connection
Sockets ᕡ on the EM 3532 receiver can be used to monitor the sound signal received with
headphones. The headphone volume is adjusted with controls ᕢ.
Please use headphones with a 1/4 ” (6.3 mm) ø stereo jack plug. The sound signal itself is mono.
The Sennheiser HD 25 headphone is especially usefull for this purpose.
In order to judge the quality of the received sound signal even under unfavourable conditions (low
AF level in the transmitter) and with high ambient noise (e.g. on the stage), the sound signal at
sockets ᕡ can be monitored at an amplification of up to 30 dB compared with the LINE output.
For strong sound signals, however, this can distort the sound if control ᕢ is turned to a high level.
In this case, turn control ᕢ down until the distortion disappears. If the distortion remains, the
transmitter itself is overmodulated.
Volume up? – No!
First of all, the volume control ᕢ should always be adjusted to the lowest volume
(by turning it anti-clockwise as far as possible). Then turn up the volume control ᕢ
gradually until you have reached the desired volume.
When people use headphones, they tend to choose a higher volume than with
loudspeakers. Listening at high volume levels for long periods can lead to perma-
nent hearing defects. Please protect your hearing, and as far as possible, check the
sound signal only at moderate volumes.
64
Download from Www.Somanuals.com. All Manuals Search And Download.
23 Replacing a fuse
Disconnect the receiver completely from the mains! To do so, pull out the mains connector ᕨ on
the receiver. You can then remove the fuse holder ᕧ with the inserted fuse. Replace the fuse by a
new fuse with the same rating and switch on the receiver again. Make sure that you have inserted
the fuse holder the correct way round! The set voltage is shown at the top of the fuse holder.
A faulty fuse should always be regarded as a warning. In most cases, the cause is harmless – a
short voltage surge or some similar cause has triggered the protective mechanism. When the fuse
has been replaced, the receiver works again.
If the replacement fuse also blows, please consult a specialist who can discover the cause. We
recommend you to contact your Sennheiser distributor or to send the receiver, with a precise
description of the trouble, to a Sennheiser service department in your area. You can find the
address of your nearest service department in the enclosed Service card or on the Internet at
65
Download from Www.Somanuals.com. All Manuals Search And Download.
ቢ
ባ
24 Sennheiser transmitters report their battery status
Sennheiser supplies hand-held and pocket transmitters which provide information on the available
transmitter battery status to the receiver. This information can be evaluated with the EM 3532
receiver.
ቢ
ባ
The remaining battery capacity is first indicated via the six-step bargraph on the display
panel ᕣ.
When the battery capacity is so low that only a transmission time of about 20 to 30 minutes
remains, the “LOW BATT” display flashes on the display panel ᕣ.
You should now immediately replace the transmitter battery. The AMF (Advanced Muting
Function) in the EM 3532 receiver helps you, as far as possible, to maintain the transmission
without noise.
Notes
Ǡ
Ǡ
The “LOW BATT” display is reset by the mute function. Whenever the squelch is activated
in the receiver, the “LOW BATT” display goes off and the evaluation of the battery status
signal from the transmitter starts over again.
Under favourable reception conditions, the evaluation of the battery information from the
transmitter lasts about 10 – 20 seconds. However, it can be significantly longer if reception
is subject to interference from time to time. This time is then also needed by the display in
display panel ᕣ in order to update the information shown.
66
Download from Www.Somanuals.com. All Manuals Search And Download.
25 Suitable Sennheiser transmitters
For the optimum use of the excellent reception qualities of the EM 3532 receivers, Sennheiser
offers hand-held and pocket transmitters in a variety of configurations:
Pocket transmitters:
SK 1063-U
BF 1083-U
SK 50-U
(without display of battery status)
(without display of battery status)
(with display of battery status)
(with display of battery status)
SK 250-U
Hand-held transmitters:
SKM 1072-U
SKM 3072-U
SKM 5000-U
(without display of battery status)
(with display of battery status)
(with display of battery status)
Information on the many possible combinations of Sennheiser products and their use in multi-
channel systems can be found in the planning brochure “Practical Applications in RF Technology”
which your Sennheiser distributor has in stock or will be pleased to order for you from Sennheiser.
For up-to-date information on Sennheiser products, you can also
visit the Sennheiser Web site at “http://www.sennheiser.com”.
67
Download from Www.Somanuals.com. All Manuals Search And Download.
26 Error checklist
Error
Possible cause
Receiver does not work;
display panel dark
ț
ț
Fuse defective
Receiver does not work;
display panel lit up
Transmission frequency does not agree
with receiving frequency
ț
ț
Squelch threshold adjusted too high
Sound distorted
AF output signal adjusted too high. Input
of the connected mixing console or
amplifier is overmodulated
ț
ț
Transmission microphone overmodulated,
reduce microphone sensitivity
(see corresponding section in the operating
manual of the transmitter)
Sound overlaid with background noise
Transmitter not sensitive enough; where
appropriate, switch transmitter sensitivity
from “low” to “high” or increase trans-
mitter sensitivity from - 30 dB to 0 dB via
operating menu (SKM 3072-U only)
27 Safety instructions
ț
Never open electronic devices! This must only be done by authorised personnel and is all
the more important for current-carrying units. If devices are opened by customers in breach
of this instruction, the warranty becomes null and void.
ț
ț
Always disconnect the receiver from the mains by removing the plug when you wish to
change connections or move the device to a different place.
Keep the receiver away from central heating radiators and electric heaters. Never expose it
to direct sunlight.
ț
ț
Use the receiver in dry rooms only.
Use a damp cloth for cleaning the receiver. Do not use any cleansing agents or solvents.
68
Download from Www.Somanuals.com. All Manuals Search And Download.
28 Recommended accessories
ț
ț
ț
ț
ț
ț
ț
Antenna mount
GA 3030-AM
A 12 AD-UHF
GZA 1036-9
Cat. no. 04368
Cat. no. 04156
Cat. no. 02332
Cat. no. 03598
Cat. no. 02324
Cat. no. 02325
Cat. no. 02326
Cat. no. 02368
Active antenna
Ground plane antenna
Antenna booster
AB 1036-TV
GZL 1019 A1
GZL 1019 A5
GZL 1019 A10
GZV 1019A
Co-axial cable, 1 m
Co-axial cable, 5 m
Co-axial cable, 10 m
ț
ț
BNC coupler
Active antenna splitter
custom-built to customer specifications
AS-X
Cat. no. 03273
Cat. no. 02976
ț
Monitoring headphone
HD 25
69
Download from Www.Somanuals.com. All Manuals Search And Download.
29 Technical data
RF characteristics
Frequency range
430–960 MHz
Receiving frequencies
Switching bandwidth
max. 32 (32 frequency memories)
24 MHz
Frequency stability
10 ppm (– 10 °C to + 55 °C)
< 5 μV for 90 dBA rms SNR
0 to 100 μV, adjustable
≥ 50 dB, typ. 65 dB
≥ 75 dB
> 66 dB (400 kHz/800 kHz)
< – 57 dBm (2 nW)
2 BNC sockets
Sensitivity (with HiDyn plus™)
Squelch treshold
Image rejection
Adjacent channel rejection
Intermodulation attenuation
Free field interference radiation 30–2,000 MHz
Antenna inputs
Antenna input impedance
50 Ω
AF characteristics
Modulation
Compander system
De-emphasis
wideband FM
Sennheiser HiDyn plus™
50 μs
Nominal/peak deviation
AF frequency response
40 kHz/ 56 kHz
45–20,000 Hz
AF outputs
LINE
MONITOR
3-pin XLR, transformer balanced
1/4 ” (6.3 mm) ø jack plug
(mono signal on stereo socket
Signal to L- and R-ring, sleeve earthed)
AF output voltage at peak deviation
LINE: 0–5.6 V adjustable, ≥ 2 kΩ
MONITOR: 0–2.8 V adjustable, ≥ 600 Ω
Amplification on monitor output
Source impedance of AF outputs
Signal-to-noise ratio
30 dB
≤ 50 Ω (LINE at max. level)
≥ 120 dBA rms
≥ 116 dB external rms
≥ 106 dB CCIR peak
≤ 0.5 %, typ. 0.25 %
at 1 mVRF and peak deviation
THD at 1 kHz and nominal deviation
Overall device
Temperature range
Power supply
Power consumption
DC supply
– 10 °C to + 55 °C
115/230 V AC + 10 %/– 15 %
max. 15 VA
11–18 V/< 13 W
Dimensions (without rack mount “ears”)
Weight
436 x 248 x 43,4 mm (19”, 1 U)
approx. 4,000 g
In compliance with standards
ETS 300422 and 300445
70
Download from Www.Somanuals.com. All Manuals Search And Download.
|