now you can see
MANUAL
COLOUR 2.4GHz WIRELESS DVR
SYSTEM WITH TFT-LCD HANDHELD
MONITOR AND INDOOR CAMERA
COLOREZ LE SYSTÈME SANS FIL DE 2.4GHZ DVR AVEC LE MONITEUR
TENU DANS LA MAIN DE TFT-LCD ET LA CAMERA D'INTÉRIEUR
MODEL #: GX5400
Download from Www.Somanuals.com. All Manuals Search And Download.
PACKING LIST
Check to make sure all of the items shown below are included in your
Wireless Digital Video Recording System. If something is missing, contact your
dealer as soon as possible.
MPEG4 DVR
Handheld Monitor
Colour Camera
AV Cables
AC Adapters
FUNCTIONS AND PARTS LIST
MPEG4 DVR Handheld Monitor -Side View
1. INPUT SOURCE: RF(wireless camera) or AV cameras.
2
AV IN: 3.5 mm jack for audio/ video line in.
3
AV OUT: 3.5 mm jack for audio/ video line out.
4
5
6
7
VIDEO SYSTEM: Switches from NTSC or PAL format.
POWER: Switches power to ON or OFF.
DC 12V IN: Power input.
Compact Flash Card Slot.
2
GX5400: 2.4GHz Wireless Digital Video Recording System
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONS AND PARTS LIST
MPEG4 DVR Handheld Monitor -Front View
1
2
3
4
5
6
LCD: 2.5" Colour TFT-LCD
POWER LED: Lights up when POWER ON.
STATUS LED: Lights up when recording, flashes when storage or otherwise unlit.
RECꢀ BUTTON: Press to start manual recording.
PLAYꢁ/ PAUSEꢂ BUTTON: Press to pause or restart playback.
STOP/EXIT ꢃ BUTTON: Press to stop playback or manual recording. Press to
exit the menu.
7
DISPLAY BUTTON: Press to switch screen ON/ OFF or remove status info.
8 ꢄVOL UP BUTTON: Press to adjust the volume level up.
9 ꢅCH DOWN BUTTON: Press to switch camera channels in viewing mode.
In video playback mode press to fast rewind. When paused press to step
play.
10 ꢆMENU/ ENTER BUTTON: Press to enter menu setup.
11 ꢇVOL DOWN BUTTON: Press to adjust the volume level down.
12 ANTENNA
13 ꢈ CH UP BUTTON: Press to switch camera channels. In video playback
mode press to fast forward. When paused press to step play.
14 BUILD-IN SPEAKER.
3
GX5400: 2.4GHz Wireless Digital Video Recording System
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONS AND PARTS LIST
MPEG4 DVR Handheld Monitor -Front View
1
2
3
IR (infrared) LED: Emit invisible IR light to see in the dark.
CAMERA LENS
BRACKET HOLE: There is a hole on the top of the camera for ceiling
mounting and the bottom for other mounting solutions.
ANTENNA
4
5
LIGHT DETECTOR: CDS Sensor will automatically turn on the IR LEDs when
it gets dark.
6
7
8
9
MICROPHONE
POWER CONNECTOR
CHANNEL SWITCH (ON/ OFF)
POWER LED: Indicates that power is being fed to the camera.
4
GX5400: 2.4GHz Wireless Digital Video Recording System
Download from Www.Somanuals.com. All Manuals Search And Download.
CONFIGURATION
1
RF Camera: Switch INPUT SOURCE to "RF".
Audio/ Video Transmission
Install camera to a high position in order to avoid from motion interference and reduce
effects of transmission quality.
When low signals occur, please adjust the antenna to the appropriate angle for the
optimum receiver/ transmission performance.
2
AV Line In: Switch INPUT SOURCE to "AV". Lets you connect a wired
camera, DVD or other AV source to the monitor.
5
GX5400: 2.4GHz Wireless Digital Video Recording System
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
Power On
1
Before turning the system on, please check the local area video system
(NTSC/ PAL). The VIDEO SYSTEM is situated on the right side panel; this
setup will affect the video system input and output. NTSC is the standard
video system in North America.
2
The power switch is situated on the right side of the device as well.
(switch "ON" to power-on and "OFF" to power-off)
NOTE: The system auto-detects its cameras when the monitor is turned on. When the status LED
flashes, this indicates that the CF card is proceeding with testing (complete boot time is
several seconds). If an image file error has been detected, the CF card will suggest the user to
initiate repair using the computer or use the Repair/Format function supported by the device.
[CF Card Management: Repair/Format function]
3
4
The user may use AV/ RF switch to select the video input system.
Live mode is the pre-set mode after power-on. When it is currently under
schedule recording, system auto enters recording mode.
•
•
•
CF auto repair status, RF channel selection, speaker volume setup, and LCD power on
status can be setup in [7.7 Power On Setup].
Do not withdraw the CF card while booting. It may destroy the data stored within the
CF card.
When no images are displayed on the LCD monitor, please check the video source
(line in or RF1~RF4) and NTSC/ PAL switch.
Live Mode
1
Live mode is the default setup after system start-up. User may view live
images, setup the receiving channel of the camera and adjust the
sound volume.
a. Two types of video input source (RF/AV): Switch to "RF" for
connecting to RF camera and "AV" to line input camera.
AV IN
The device supports one line input camera.
RF1 ~ RF4 The device supports portable wireless (RF) camera
(maximum connection of 4 RF cameras).
Press ꢅorꢈ button to switch between cameras (RF1 ~ RF4).
b. Sound volume: The user may press ꢄorꢇ button to adjust the
volume of the build-in speaker.
continued...
6
GX5400: 2.4GHz Wireless Digital Video Recording System
Download from Www.Somanuals.com. All Manuals Search And Download.
c. Monitoring Display: Press ꢆDISPLAY button to switch between LCD
display mode and OSD info.
1
2
Time Display: System Date and Time.
Record Status Display:
: Connect the camera to the AV terminal.
: Record Resolution, please refer to Record Setup for VIDEO SIZE setup.
: Record Quality, please refer to Record Setup for VIDEO QUALITY setup.
: Audio Off Record, please refer to Record Setup for AUDIO RECORD setup.
3
CF Card Status:
CF Card has not been inserted or malfunction
CF Card is proceeding file testing.
CF Card is functioning normally.
Disk full and overwrite record.
ꢉ
Record Mode
1. Start Record: 3 Types of recording mode.
Manual Record: Suitable recording at anytime. Press RECꢀ button, to enter
manual recording status (start recording). For more information, please
refer to Record Setup.
Motion Detection Record: Suitable to record when you have a specific
area to monitor. Motion detection triggers schedule recording, but it will
only start recording when the movement variation exceeds the set alarm
limitation value. For more information, please refer to the Record setup
Continuous Record: Suitable on few constant frame recording or on long-
term continuous recording. For more information, please refer to the
Record Setup.
2. Stop Record: Press STOP ꢃ button. It stops manual recording only. If you
enter playback or menu mode, any kinds of recording mode will be
stopped. To continue recording, please follow the methods below to
restart recording.
continued...
7
GX5400: 2.4GHz Wireless Digital Video Recording System
Download from Www.Somanuals.com. All Manuals Search And Download.
Manual Record
Schedule Record
Motion Detection Record
Repress RECꢀ button.
After exit playback or menu mode, whether
the setup has been changed or not, the
system will auto re-check the record
schedule setup again.
3
Record Display
Indicates recording is in progress.
Indicates the status of the event that has been triggered.
4. The event status is determined by the system recording, according to the
order of priority. The order of priority: Manual Record, Motion Detection
and then Schedule Record.
5. Different recording modes may have different kinds of setups. Basic setup:
video size, recording frames, video quality, and audio recording. When
different recording modes are triggered, the system starts recording
according to the different setup. This kind of design provides flexibility to
ensure efficient recording time and quality.
Example: if you’re working from 8:00am to 6:00pm, setup [Schedule
Record] to low video quality (less recording frames per second) to extend
the recording time. And off working hours, setup [Motion Detection
Record] to enable high video quality with the highest recording frames,
when an event occurs.
6. Video or audio may be recorded into the CF card (CF card is purchased
separately). When the video has been stored, the status LED flashes and
indicates that the system is currently loading the file into the CF card.
•
Do not withdraw the CF card while recording. It may destroy the data stored within
the CF card.
•
•
Power loss during recording results incomplete videos or errors.
Video loss during recording, the system stops recording, backups the files, and when the
videos are normal again, the system will continue recording.
8
GX5400: 2.4GHz Wireless Digital Video Recording System
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback Mode
Selectable Playback format: Continuous Playback and Searching Playback.
A. Normal Playback: Pressꢁbutton to playback according to the CF card
file order recorded.
ꢁ:
Normal speed playback.
ꢅꢈ:
Fast Rewind and Fast Forward (Speed: x2/ x4/ x8/ x16/ x32).
Pressꢁbutton to return to normal speed playback.
During playback, press PAUSEꢂ button to pause playback and press
it twice to return to playback status.
ꢂ:
ꢊꢋ:
During pause, press ꢅorꢈ button to step back one frame or to step
forward one frame and pressꢁ button to return to normal speed
playback.
DISPLAY: Switch to [Hide Status Info.], [Hide LCD Monitor], and
[Display LCD Monitor and Status Info.]
Press STOPꢌ button to stop playback function and to return to live status.
B. Search and Playback:
1
File directory shows dates and the number of recordings under the
directory. The user may press ꢄorꢇ button to move the cursor up or
down.
2
3
Current location page.
Each color distinguishing different recording events, the user may press
ꢅ+ or ꢈ- button to move the cursor left or right and immediately shows
the first image of the highlighted event on the screen display.
Displays the time highlighted by the event bar.
Blue: Manual Record, Red: Motion Detection Record, White: Schedule
Record. Press STOPꢌ button to stop playback and the system will return
to [SEARCH and PLAY] selection and enables the user to select the
preferred input source.
4
5
9
GX5400: 2.4GHz Wireless Digital Video Recording System
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
Withdrawing the CF card during playback, stops playback and
enters the monitoring mode.
The device supports playback only to images recorded by our
device, other ASF video files are not guaranteed.
PC Playback
1. The device uses a CF card as its main storage. The user may read the
data stored in the CF card from computers that support CF card reader
device. You will need a device capable of reading a CF card.
2. All files (under DV\ASF folder) have approximate sizes of 1MB and file
names are ordered according to recorded times (sequence).
File Playback: User may use Microsoft® -Media Player or DivX- DivX Player
Backup playback: You may playback backup files from the computer to
the DVR Monitor (copy files to the CF card under \DV\ASF folder).
•
When first time using Media Player to playback, it requires the most updated decoder
from the Microsoft® software website.
CF Card Maintenance
1. The device supports only the FAT16 file system; therefore it is unable to
determine other file systems. Not Mac compatible. Please proceed the
function [MENU / CF CARD OPTIONS], or use the computer to format the
CF card to FAT16 file system.
2. The system supports only partial CF card file system repair. The system is
unable to detect any file system damage, therefore please format the
function by entering [MENU / CF CARD OPTIONS] and select
Repair/Format, or format the CF card on a computer.
•
Due to special design of the device, the maximum storage capacity is 4GB, but you
have to format the CF card on this device. (The maximum storage capacity of a FAT16
file system is 2GB).
•
Except ASF files generated from this device, please don't copy any other files to
\DV\ASF folder. Other files in \DV\ASF folder will be deleted automatically.
How to Download the Update Software
Use the Compact Flash card to update your system firmware:
1
2
Create a new directory under DV directory (:\DV\Hex).
Copy the new system firmware into the new directory of the Compact
Flash card from your computer.
3
4
Insert the CF card; switch off the main power and then restart.
Wait for 5 to 6 seconds, the system update will be completed and
returned back to live mode.
Do not switch off the device or withdraw the CF card during system update. If power loss
occurs during step (4), please repeat step (3) and (4) again.
10
GX5400: 2.4GHz Wireless Digital Video Recording System
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU SETUP
MAIN MENU
1
2
MAIN MENU: Item subject.
Menu Layer Indication: The device consists of three menu layers.
ꢌ : First Menu Layer (Main Menu)
ꢌꢌ : Second Menu Layer
ꢌꢌꢌ : Third Menu Layer
3
MENU Content: Basic Menu Operations.
Press ꢄorꢇ button, to move the highlight-bar and the cursor (ꢁ).
Press MENU/ENTERꢆ button, to enter the sub menu (ꢁ).
Press STOPꢌ button:
•
Under second or third menu layer, the system will return to the
previous menu layer (second layer to first layer or third layer to
second layer).
•
Under main menu (first menu layer), the system will enter live mode.
Press ꢅorꢈ button, to increase or decrease the setting values that has
been highlighted.
NOTE: All words underlined and bold indicates [Default Value].
DATE/TIME
1
1
2
Date Format: Y/M/D M/D/Y D/M/Y are the possible options.
Date/Time Adjustment: Year settings are from 2000 to 2099.
11
GX5400: 2.4GHz Wireless Digital Video Recording System
Download from Www.Somanuals.com. All Manuals Search And Download.
Motion Detection
1
Window setup:
1
2
3
4
Detection Cell: Whole screen is divided into 22x15 square cells.
Detection Block: Two or more cells form a block.
Cursor: Press [PLAY] button to switch to Select/ Edit mode.
Detection Block: Area that is being targeted for motion detection.
2. Cursor Movement: Press [PLAY] button, switch cursor to setup mode
(cursor color is black). Press ꢄ,ꢇ,ꢅ,ꢈ button to move the cursor freely.
3. Detection Area Setup:
1
Press [PLAY] button to select edit detection block function.
2
Press [PLAY] button, switch cursor to edit mode (the cursor color is
pink). Press ꢄ,ꢇ,ꢅ,ꢈ button, follow step (1) to change the size of
the detection block.
3
4
The detection area is colored red and non-detection area by color
blue.
When a detected object is moving in the detection area, the area
turns from red to transparent (color turns from red to transparent
indicates moving status).
5
Video Detection Block Sensitivity Setup:
Changing the alert value setup may affect the recording sensitivity
of the Motion Detection.
continued...
12
GX5400: 2.4GHz Wireless Digital Video Recording System
Download from Www.Somanuals.com. All Manuals Search And Download.
1
Sensitivity Bar: The color black indicates the image variable value and
color red indicates the motion detection threshold.
MD Energy: Current image variation value.
MD Threshold: Press ꢅorꢈ button, to change the motion detection
threshold value.
2
3
RECORD SETUP
Selectable manual or schedule recording, basic setups are shown below:
1
Manual Record:
A
B
Video Size/ Frame Rate:
Image Quality:
C
Audio Record: Enable or disable audio recording.
2
Schedule Record: Records only within the setup time range.
continued...
13
GX5400: 2.4GHz Wireless Digital Video Recording System
Download from Www.Somanuals.com. All Manuals Search And Download.
RECORD: Enable or disable the schedule recording (ON/ OFF).
SCHEDULE: ab:cd - ab:cd = 24 hour recording and 00:00 - 00:01 = Record
of one minute image from 00:00 to 00:01.
DURATION: Duration time when motion detection has been triggered
(1 SEC/ 5 SEC/10 SEC/ 20 SEC/ 30 SEC)
CF CARD FUNCTION
1
CF FULL: LOOPꢉ (continuous recording)/ STOP (stop recording).
When CF card storage capacity is full, it will start overwriting information
from the earliest videos (auto repeating continuous recording).
REPAIR: Checks internal CF card data and delete error files.
FORMAT: It will delete all data stored in the CF Card, and create a new
directory under DV directory (:\DV\ASF).
2
3
NOTE: Proceeding continuous recording, old videos can be deleted and
overwritten. Please confirm before setup.
NOTE: Recording time depend on the CF card capacity, different
recording modes, and degree of video variation.
SYSTEM STATUS DISPLAY
Press any button to return to the Main Menu.
14
GX5400: 2.4GHz Wireless Digital Video Recording System
Download from Www.Somanuals.com. All Manuals Search And Download.
POWER ON SETUP
1
2
3
4
CF AUTO REPAIR: CF auto repair on/off during power on.
RF CHANNEL: RF channel selection during power on.
SPK VOLUME: Speaker volume setup during power on.
LCD: LCD on/off during power on
RETURN TO FACTORY DEFAULT VALUE
TROUBLESHOOTING
A
Power
Q: Why are there no images after power-on?
A: a. Power LED is unlit: indicates power failure or insufficient power.
b. Power LED is lit: please check the input source (camera or AV).
When RF input source is used, please make sure that the camera
and the main device have been setup to the same channel. When
AV IN input source is used, please make sure that the AV line is
properly connected to the camera (Video/ Audio terminal);
otherwise check the camera video output line connections.
Q: Which type of batteries to choose from?
A: Please use nickel metal hydride (NiMh) or alkaline batteries for the
power supply.
B
Camera
Q: Why does video interference occur when using wireless IR camera?
A: a. Please make a channel adjustment, make sure that the camera
15
GX5400: 2.4GHz Wireless Digital Video Recording System
Download from Www.Somanuals.com. All Manuals Search And Download.
and the main device have been setup to the same channel. If you
have 2 wireless IR cameras, one should select channel 1 & 3 or 2 & 4
to obtain the optimum result.
b. Prevent obstructions (caused by wall or steel) between the main
device and the camera during transmission.
c. Due to wireless network access point and wireless IR camera
having the same 2.4GHz frequency. Therefore, please prevent
operating the wireless IR camera under wireless networking
environment.
Q: May one use other branded wireless IR cameras?
A: Please adjust the channel of the main device, check whether
normal video images are displayed and furthermore apply audio
testing. It is recommended that the GX5400 system only be used with
a GX540 camera because the channel frequencies are identical.
Q: May one switch channels to monitor multiple wireless IR cameras?
A: Yes, please refer to [IR Camera-Back View] for wireless IR camera
channel setup.
Q: Why is there no audio?
A: Please make sure that the monitor is properly connected to the
correct camera input and the volume is turned up.
Q: Why are video images constantly changing color?
A: It is because according to the CCD camera, different illuminants
reflects different degrees of color rolling; please keep the camera
away from direct lighting.
Q: How can the wireless IR function on the camera be started?
A: IR function is auto started during the night time (low illumination).
The CDS sensor recognizes low light and will automatically turn on
the LEDs.
Q: Why is the video black & white when the IR function is activated?
A: It is because under low lux video, images turn from color to black
and white.
C
CF Card
Q: Why can't the device read the CF card?
A: a. The CF card is damaged.
b. The CF card system format is incompatible to the device.
Please format the CF card to the FAT16 file system.
Q: May one use the CF card from their digital camera?
A: Yes, only if it is FAT16 format.
Q: Are there any limitations on CF card brand?
A: No, any standard brand may be used. CF cards are universal.
D
Record
Q: Why are the video images distorted?
A: Make sure that the monitor’s video source is setup properly
(i.e., main device is setup to PAL and camera to NTSC).
Q: Why is the recording quality poor?
A: Please adjust your recording parameter; adjust your quality to high.
Q: Why is the device unable to record?
A: a. Check the input system.
b. Check whether the CF card have been inserted (to view the
monitoring status, please refer to the bottom right screen corner, CF
16
GX5400: 2.4GHz Wireless Digital Video Recording System
Download from Www.Somanuals.com. All Manuals Search And Download.
card status info).
c. [ CF Card Management] When the recording method is not setup
as continuous recording, it stops recording when the storage
capacity is full.
d. Unable to perform schedule recording, please refer to
[Record Mode - Stop Record].
e. If still unable to record contact SVAT technical support at
E
Playback
Q: Why is the device unable to playback?
A: a. Check whether the CF card has been inserted (to view the
monitoring status, please refer to the bottom right screen corner,
CF card status info).
b. See if there are any files on the CF card.
c. The device does not guarantee to playback videos of other
MPEG4 files.
d. If still unable to playback contact SVAT technical support at
CAMERA SPECIFICATIONS
100mA
17
GX5400: 2.4GHz Wireless Digital Video Recording System
Download from Www.Somanuals.com. All Manuals Search And Download.
MONITOR SPECIFICATIONS
Contact [email protected] if a french version of this manual is required.
18
GX5400: 2.4GHz Wireless Digital Video Recording System
Download from Www.Somanuals.com. All Manuals Search And Download.
GX5400: 2.4GHz Wireless Digital Video Recording System
now you can see
Download from Www.Somanuals.com. All Manuals Search And Download.
|