®
SUPER
M28SAB/M28SAB-OEM
MOBILE RACK
USER'S GUIDE
Rev. 1.0
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Information and Technical Specifications
Table of Contents
Contacting Supermicro.......................................................................................iv
Returning Merchandise for Service.....................................................................v
Chapter 1 Safety Guidelines ....................................................................1-1
1-1
1-2
1-3
ESD Safety Guidelines ................................................................................... 1-1
General Safety Guidelines.............................................................................. 1-1
An Important Note to Users............................................................................ 1-2
Chapter 2 Introduction..............................................................................2-1
2-1
2-2
Overview ......................................................................................................... 2-1
Product Features ........................................................................................... 2-1
Operating Systems..................................................................................... 2-1
Additional Information ..................................................................................... 2-2
Chapter 3 SAS-I28A Backplane Specifications......................................3-1
3-1
3-2
3-3
Front Connectors and Jumpers ...................................................................... 3-1
Front Components, Connectors and Pin Definitions ...................................... 3-2
Front Jumper Locations and Pin Definitions................................................... 3-3
Explanation of Jumpers .................................................................................. 3-3
Rear Connectors and LED Indicators............................................................. 3-4
3-4
Chapter 4 Mobile Rack Installation Instructions....................................4-1
4-1
Shipping List.................................................................................................... 4-1
4-2
4-3
Tools Required ................................................................................................ 4-1
Other Parts...................................................................................................... 4-1
4-4
Setup and Installation Steps........................................................................... 4-2
4-5
4-6
4-7
General Safety Guidelines.............................................................................. 4-2
Before Accessing the Mobile Rack ................................................................. 4-2
Cooling Fan Installation .................................................................................. 4-3
Installing the Cooling Fan ............................................................................... 4-3
Fan Removal................................................................................................... 4-3
Hard Drive Installation..................................................................................... 4-4
Connect Data and Power Cables ................................................................... 4-6
4-8
4-9
4-10 Advanced Configuration.................................................................................. 4-6
iii
Download from Www.Somanuals.com. All Manuals Search And Download.
M28SAB Mobile Rack User's Guide
Contacting Supermicro
Headquarters
Address:
Super Micro Computer, Inc.
980 Rock Ave.
San Jose, CA 95131 U.S.A.
Tel:
+1 (408) 503-8000
Fax:
Email:
+1 (408) 503-8008
[email protected] (General Information)
Web Site:
Europe
Address:
Super Micro Computer B.V.
Het Sterrenbeeld 28, 5215 ML
's-Hertogenbosch, The Netherlands
Tel:
+31 (0) 73-6400390
Fax:
Email:
+31 (0) 73-6416525
[email protected] (General Information)
[email protected] (Customer Support)
Asia-Pacific
Address:
Super Micro Computer, Inc.
4F, No. 232-1, Liancheng Rd.
Chung-Ho 235, Taipei County
Taiwan, R.O.C.
Tel:
+886-(2) 8226-3990
+886-(2) 8226-3991
Fax:
Web Site:
Technical Support:
Email:
Tel:
886-2-8226-1900
iv
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Information and Technical Specifications
Returning Merchandise for Service
A receipt or copy of your invoice marked with the date of purchase is required be-
fore any warranty service will be rendered. You can obtain service by calling your
vendor for a Returned Merchandise Authorization (RMA) number. When returning
to the manufacturer, the RMA number should be prominently displayed on the
outside of the shipping carton, and mailed prepaid or hand-carried. Shipping and
handling charges will be applied for all orders that must be mailed when service
is complete.
micro.com/support/rma/).
Whenever possible, repack the mobile rack in the original Supermicro carton, using
the original packaging material. If these are no longer available, be sure to pack the
mobile rack securely, using packaging material to surround the mobile rack so that
it does not shift within the carton and become damaged during shipping.
This warranty only covers normal consumer use and does not cover damages in-
curred in shipping or from failure due to the alteration, misuse, abuse or improper
maintenance of products.
During the warranty period, contact your distributor first for any product problems.
v
Download from Www.Somanuals.com. All Manuals Search And Download.
M28SAB Mobile Rack User's Guide
Notes
vi
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Information and Technical Specifications
Chapter 1
Safety Guidelines
To avoid personal injury and property damage, carefully follow all the safety steps
listed below when accessing your system or handling the components.
1-1 ESD Safety Guidelines
Electrostatic Discharge (ESD) can damage electronic components. To prevent dam-
age to your system, it is important to handle it very carefully. The following measures
are generally sufficient to protect your equipment from ESD.
•
•
Use a grounded wrist strap designed to prevent static discharge.
Touch a grounded metal object before removing a component from the antistatic
bag.
•
Handle the mobile rack backplane by its edges only; do not touch its compo-
nents, peripheral chips, memory modules or gold contacts.
•
•
When handling chips or modules, avoid touching their pins.
Put the card and peripherals back into their antistatic bags when not in use.
1-2 General Safety Guidelines
•
•
•
Always disconnect power cables before installing or removing any components
from the computer, including the backplane.
Disconnect the power cable before installing or removing any cables from the
backplane.
Make sure that the backplane is securely and properly installed on the mother-
board to prevent damage to the system due to power shortage.
1-1
Download from Www.Somanuals.com. All Manuals Search And Download.
M28SAB Mobile Rack User's Guide
1-3 An Important Note to Users
All images and layouts shown in this user's guide are based upon the latest equip-
ment and PCB revision available at the time of publishing. The card and equipment
you have received may or may not look exactly the same as the graphics shown
in this manual.
1-2
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Information and Technical Specifications
Chapter 2
Introduction
2-1 Overview
This manual has been written for system integrators, PC technicians and
knowledgeable PC users. It provides detailed information for the installation and
use of the M28SAB mobile rack.
The Supermicro M28SAB mobile rack showcases advanced technology innovations
in modular connectivity and data transferability and supplies reliable, effective, and
scalable solutions for tomorrow’s data communications industry.
2-2 Product Features
The M28SAB mobile rack includes the following:
•
•
•
•
Slim design: pocket-size (5-3/4” width x 3-3/8” height).
Supports a 8 x 2.5” small form factor hard disk drive.
Supports up to 5V/10A (average) and 12V/10A (average).
Supports SAS 2.0 and SATA III at 6 Gbps transfer speed.
Operating Systems
This mobile rack supports the following operating systems:
•
•
Windows 2000, Windows XP, Windows 7 and Windows 2003.
Linux: Red Hat and SuSE.
For the most current information on supported operating systems visit the
2-1
Download from Www.Somanuals.com. All Manuals Search And Download.
M28SAB Mobile Rack User's Guide
Additional Information
The M28SAB mobile rack was designed for use in certain chassis and servers or
as an optional unit for storage expansion. Use the chassis or server manual for
installation instructions. Use the instructions listed in this manual to use the mobile
rack independent of a chassis.
The pictures or graphics shown in this user’s guide were based upon the latest revi-
sion available at the time of publication of this manual. The M28SAB mobile rack
may or may not look exactly the same as the graphics shown in this manual.
The availability of the SAS devices supported depends upon the readiness of firm-
ware and hardware support.
The SAS-I28A mobile rack backplane has been designed to utilize the most up-
to-date technology available, providing your system with reliable, high-quality
performance.
This manual reflects SAS-I28A Revision 1.00, the most current release available at
com for the latest updates, compatible parts and supported configurations.
2-2
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Information and Technical Specifications
Chapter 3
SAS-I28A Backplane Specifications
3-1 Front Connectors and Jumpers
7
1
UPGRADE #2
1
UPGRDE #1
5
22
JSM2
12
JSM1
A18
A1
A18
A1
34
44
6
2
2
6
23
MH1
MH2
1
JP61
5
1-2 WITH FAN
2-3 NO FAN
33
23
1
Y1
Y2
B18
B1
B18
B1
SAS IN #4-#7
34
SAS IN #0-#3
U40
44
RP14
JP61
JP54
3
TP4 TP3
8
1
ACT LED TEST
1
FAN
2
1
1
1
6
1
5
1
9
1
4
1
3
1
JP3
JP62
3
1
+
4
1
3
JP25
R69
C84
JP25: OH TEMP
1
1
C78
4
+5V
OPEN 45
C
+12V
JP1
1-2 50
2-3 55
C
C
C77
DESIGNED IN USA
REV 1.00
BPN-SASI28A
9071 RST
Figure 3-1: Front Connectors and Components
Front Connectors and Components
1. SAS IN #0 - #3: JSM1
6. MG9071 chip
2. SAS IN #4 - #7: JSM2
3. Power connector: JP1
4. Power connector: JP3
5. MG9071 chip
7. Upgrade connector #1: JP46
8. Upgrade connector #2: JP47
9. Fan connector: JP54
3-1
Download from Www.Somanuals.com. All Manuals Search And Download.
M28SAB Mobile Rack User's Guide
3-2 Front Components, Connectors and Pin Definitions
#1 - #2 SAS Ports
The SAS ports are used to connect the Mini-
SAS cables. The ports are designated SAS IN
#0 - #3, and SAS IN #4 - #7. Each port is also
compatible with SATA drives.
#3 - #4 Backplane Main Power Connectors
Backplane
Main Power
The 4-pin connectors, designated JP1 and
JP3, provide power to the backplane. See the
table on the right for pin definitions. Both of
these connectors must be used at the same
time.
4-Pin Connectors
Pin#
1
Definition
+12V
2 and 3
4
Ground
+5V
#5. - #6. MG9071 Chip
The MG9071 chip is an enclosure manage-
ment controller chip.
#7 - #8 Upgrade Connector
The upgrade connectors are designated JP46
and JP47. The upgrade connector is for manu-
facturing use only.
#9 Fan Connectors
The fan connector is designated JP54.
3-2
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Information and Technical Specifications
3-3 Front Jumper Locations and Pin Definitions
UPGRADE #2
1
UPGRADE #1
5
22
JSM2
12
JSM1
A18
A1
A18
A1
34
44
6
2
2
6
23
MH1
MH2
1
JP61
5
1-2 WITH FAN
2-3 NO FAN
33
23
1
Y1
Y2
B18
B1
B18
B1
SAS IN #4-#7
34
SAS IN #0-#3
U40
44
JP61
RP14
JP61
JP54
3
TP4 TP3
ACT LED TEST
1
FAN
JP62
JP3
JP62
3
1
+
4
1
3
JP25
R69
JP25
C84
JP25: OH TEMP
OPEN 45 C
1-2 50 C
1
1
C78
4
+5V
+12V
JP1
C77
2-3 55 C
DESIGNED IN USA
REV 1.00
BPN-SASI28A
9071 RST
Figure 3-2: Front Jumper
Explanation of Jumpers
3
2
1
Connector
Pins
To modify the operation of the backplane,
jumpers can be used to choose between
optional settings. Jumpers create shorts
between two pins to change the function of
theconnector.Pin1isidentifiedwithasquare
solder pad on the printed circuit board.
Jumper
Setting
3
2
1
Note: On two-pin jumpers, "Closed" means
the jumper is on and "Open" means the
jumper is off the pins.
General Jumper Settings
Jumper
JP61
Jumper Settings
Note
1-2: Fan enabled
2-3: Fan disabled
Enables or disables the fan power.
1-2: Fan enabled
2-3: Fan disabled
Enclosure monitor enable/disable.
JP62
JP25
Open: 45o C
1-2: 50o C
2-3: 55oC
Allows the overheat temperature to be
adjusted.
3-3
Download from Www.Somanuals.com. All Manuals Search And Download.
M28SAB Mobile Rack User's Guide
3-4 Rear Connectors and LED Indicators
SAS #0
J1
SAS #1
J2
SAS #6 SAS #7
SAS #2 SAS #3
SAS #5
J6
SAS #4
J5
J3
J4
J7
J8
#3
#0
#1
#2
#4
#5
#6
J6
J7
J8
J2
J3
J1
J5
#7
J4
1
27
27
27
27
27
7
27
27
7
7
7
8
7
7
8
7
8
8
4
8
8
27
7
8
33
9
8
33
9
33
33
9
33
9
33
9
33
9
33
9
9
D9
D47
21
21
21
21
21
21
21
22
22
22
22
22
22
22
D41
C
C
A
A
D30
D31
D33
D35
D38
D39
D44
A
D32
D34
A
D36
D37
D42
D43
A
D45
A
A
A
C
A
D40
A
A
C
A
C
C
C
A
C
C
C
C
C
A
C
A
ACT2C
FAIL3
ACT3
FAIL4
ACT4
FAIL5
ACT5
ACT7
C
C
FAIL2
FAIL0
ACT0
ACT1
FAIL6
ACT6
FAIL7
FAIL1
D32
D33
D34
D35
D36
D37
D38
D39
D40
D41
D42
D43
D44
D45
D30
D31
Figure 3-3: Rear Connectors and LED Indicators
Rear LEDs
LED
Description
OH/DRIVE FAIL
D9
D47
FAN FAIL
Rear SAS/SATA Connectors and LED Indicators
Rear Connector Hard Drive Activity LED Failure LED
SAS Drive
SAS #0
SAS #1
SAS #2
SAS #3
SAS #4
SAS #5
SAS #6
SAS #7
D31
D33
D35
D37
D39
D41
D43
D45
D30
D32
D34
D36
D38
D40
D42
D44
SAS/SATA HDD #0
SAS/SATA HDD #1
SAS/SATA HDD #2
SAS/SATA HDD #3
SAS/SATA HDD #4
SAS/SATA HDD #5
SAS/SATA HDD #6
SAS/SATA HDD #7
3-4
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Information and Technical Specifications
Chapter 4
Mobile Rack Installation Instructions
4-1 Shipping Lists for M28SAB and M28SAB-OEM
Examine the your order for the following parts:
M28SAB
•
•
•
•
One M28SAB mobile rack
One 40 mm cooling fan
Thirty-two M3 screws
Four round-head screws
M28SAB-OEM
•
•
•
One M28SAB mobile rack
Thirty-two M3 screws
Four round-head screws
4-2 Tools Required
M28SAB series mobile rack assembly requires the following:
•
•
Phillips head screwdriver
Industry standard anti-static strap (recommended)
4-1
Download from Www.Somanuals.com. All Manuals Search And Download.
M28SAB Mobile Rack User's Guide
4-3 Other Parts
When using this mobile rack independent of a chassis, you may need the follow-
ing parts.
•
•
Two 4-pin power cords to connect the mobile rack to a power supply.
SAS iPass cable, part numbers CBL-0108L (39 cm), CBL-0281L (75 cm) or
CBL-0294L-01 are used to connect the SAS ports to the motherboard or RAID
controller.
4-4 Setup and Installation Steps
Use the following list as a guide to set up and install the mobile rack. If this mobile
rack is to be installed in a chassis, use the instructions in the chassis manual.
Mobile Rack Chassis Installation
1. Unpack and examine system parts.
2. Review all system and safety guidelines.
3. M28SAB: Install the system fan as described in section 4-7 of this manual
(not required on M28SAB-OEM).
M28SAB-OEM: Reset jumper JP61 to "enable", pins 2 - 3, without the fan
connected.
4. Install the hard drives.
5. Connect data and power cables.
4-5 General Safety Guidelines
•
•
Always disconnect power cables before installing or removing any components
from the computer, including the backplane.
Disconnect the power cable before installing or removing any cables from the
mobile rack or backplane.
4-2
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Information and Technical Specifications
•
Make sure that the backplane is securely and properly installed on the mother-
board to prevent damage to the system due to power shortage.
4-6 Before Accessing the Mobile Rack
Prior to Accessing the Mobile Rack
1. Power-down and power supply connected to the chassis or server. In addi-
tion, unplug all power cords from the wall outlet.
2. Disconnect all necessary cables and label the cables for easy identification.
3. Use a grounded wrist strap designed to prevent static discharge when han-
dling components.
4. Save all screws and fasteners for later use.
5. Familiarize yourself with and follow the instructions in this section.
4-3
Download from Www.Somanuals.com. All Manuals Search And Download.
M28SAB Mobile Rack User's Guide
4-7 Cooling Fan Installation (M28SAB Only)
Installing the Cooling Fan
The M28SAB mobile rack includes a cooling fan (not required on M28SAB-OEM).
When using the M28SAB without installing the mobile rack in a larger unit such as
a chassis, a cooling fan must be installed on the mobile rack unit.
For more information on installing the mobile rack into a chassis or server, see the
documentation for your mobile rack or server. You can also visit our Web site at
1. Align the mounting holes on the fan with the mounting holes in the mobile
rack.
2. Attach the cooling fan cable to the fan connector.
3. Secure with two screws as illustrated.
Figure 4-1: Installing the Fan on the M28SAB Mobile Rack
Fan Removal
Removing the Cooling Fan from the Mobile Rack
1. Remove the fan cable from the mobile rack by gentlypulling the cable from
the backplane.
2. Remove the screws securing the fan to the mobile rack.
3. Pull the fan away from the rear of the mobile rack.
4-4
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Information and Technical Specifications
4-8 Hard Drive Installation
Each M28 mobile rack includes dummy trays that act as place holders for hard
drives. Before using the mobile rack, you must install hard drives into the drive
carriers. Hard drives are sold separately.
Release Tab
Hard Drive Tray Latch
Figure 4-2: Mobile Rack with Hard Drive Trays
Installing Hard Drives into the Mobile Rack
1. Press the release tabs to open the hard drive carrier latch.
2. Using the latch as a handle, pull the drive carrier from the hard drive.
Warning! Enterprise level hard disk drives are recommended for use
in Supermicro chassis and servers. For information on recommended
!
4-5
Download from Www.Somanuals.com. All Manuals Search And Download.
M28SAB Mobile Rack User's Guide
Hard Drive
Hard Drive Carrier
M3 Screws
Figure 4-3: Hard Drive and Hard Drive Tray
3. Place a 2.5" hard drive in the hard drive carrier.
4. Align the hard drives to the rear of the hard drive tray.
5. Secure the hard drive to the tray using four M3 screws (as illustrated).
6. Using the hard drive tray latch as a handle, slide the hard drive into the
mobile rack.
7. Close the hard drive tray handle to lock the hard drive into place.
8. Repeat steps 1-8 for each hard drive that you will install into the mobile rack.
4-6
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Information and Technical Specifications
4-9 Connect Data and Power Cables
Connecting the Cables
1. Connect the SAS cables to the mobile rack. A longer SAS cable may be
required (see the recommended cables listed earlier in this manual).
2. Connect the power cables from the chassis power supply. A power cable
extension may be required.
4-10 Advanced Configuration
Use the following instructions in the unlikely event that you must access the jump-
ers, buzzer, or other backplane components.
Remove
Screws
Remove
Screw
Mobile Rack
Casing
Remove
Screw
Figure 4-4: Mobile Rack and Rear Casing
Accessing the Mobile Rack Backplane (Optional)
1. Remove the two screws that secure the casing to the mobile rack.
2. Slide the casing downward and remove it from the mobile rack.
4-7
Download from Www.Somanuals.com. All Manuals Search And Download.
M28SAB Mobile Rack User's Guide
Notes
4-8
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Information and Technical Specifications
Disclaimer (cont.)
The products sold by Supermicro are not intended for and will not be used in life sup-
port systems, medical equipment, nuclear facilities or systems, aircraft, aircraft devices,
aircraft/emergency communication devices or other critical systems whose failure to per-
form be reasonably expected to result in significant injury or loss of life or catastrophic
property damage. Accordingly, Supermicro disclaims any and all liability, and should
buyer use or sell such products for use in such ultra-hazardous applications, it does so
entirely at its own risk. Furthermore, buyer agrees to fully indemnify, defend and hold
Supermicro harmless for and against any and all claims, demands, actions, litigation,
and proceedings of any kind arising out of or related to such ultra-hazardous use or
sale.
4-9
Download from Www.Somanuals.com. All Manuals Search And Download.
|