OWNER’S MANUAL
MT-SYJCP32B1AB
Please read this manual carefully before operating your set.
Retain it for future reference.
Download from Www.Somanuals.com. All Manuals Search And Download.
WARNING / CAUTION
The lightning flash with arrowhead
symbol, within an equilateral triangle,
is intended to alert the user to the
presence of uninsulated “dangerous
voltage” within the product’s enclosure
that may be of sufficient magnitude to
constitute a risk of electric shock to
persons.
WARNING/CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR
BACK). NO USER SERVICEABLE PARTS
INSIDE. REFER TO QUALIFIED SERVICE
PERSONNEL.
The exclamation point within an equi-
lateral triangle is intended to alert the
user to the presence of important
operating and maintenance (servicing)
instructions in the literature accompa-
nying the appliance.
WARNING/CAUTION
TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE.
NOTE TO CABLE/TV INSTALLER
This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the National
Electric Code (U.S.A.). The code provides guidelines for proper grounding and, in particular, specifies
that the cable ground shall be connected to the grounding system of the building, as close to the point of
the cable entry as practical.
CAUTION
Do not attempt to modify this product in any way without written authorization from the dealer.
Unauthorized modification could void the user’s authority to operate this product.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
WARNING / CAUTION
To prevent fire or shock hazards, do not expose this product to rain or moisture.
FCC NOTICE
Class B digital device
This equipment has been tested and found to comply with the limits for a Class B digital device, pursu-
ant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential
installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be deter-
mined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution
Changes or modification not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
On Disposal
a. The fluorescent lamp used in this product contains a small amount of mercury.
b. Do not dispose of this product with general household waste.
c. Disposal of this product must be carried out in accordance to the regulations of your local authority.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings.
Install in accordance with the manufacturer's instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding type plug has two blades and a third grounding
prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit
into your outlet, consult an electrician for replacement of the obsolete outlet.
10.Protect the power cord from being walked on or pinched particularly at plugs, convenience recepta-
cles, and the point where they exit from the apparatus.
11.Only use attachments/accessories specified by the manufacturer.
12.Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid
injury from tip-over.
13.Unplug this apparatus during lightning storms or when unused for long periods of time.
14.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
15.Do not expose this apparatus to dripping or splashing and ensure that no objects filled with liquids,
such as vases, are placed on the apparatus.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Instructions
16.To completely disconnect this apparatus from the AC Mains, disconnect the mains plug from the AC
receptacle.
17.The mains plug of the power supply cord shall remain readily operable.
18.This apparatus shall be connected to a Mains socket outlet with a protective earthing connection.
NOTE
Prolonged use of headphones at a high volume may cause health damage on your ears.
The lightning flash with arrowhead symbol within an equilateral triangle, is intended to alert the
user to the presence of uninsulated "dangerous voltage " within the product's enclosure that
may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the pres-
ence of important operating and maintenance (servicing) instructions in the literature accompa-
nying the product.
WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or
moisture .
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
WARNING / CAUTION
Important Safety Instructions
Contents
3-4
5-6
7-8
Accessories
9
9
9
Supplied Accessories
Installing Batteries
Controls
10-13
10
11
12-13
Front Panel
Rear Panel
Remote Control
Installation
14
14
14
Wall mount Installation
Desktop Pedestal Installation
Connections
15-24
15
16-17
18-19
20-21
22
Antenna Connection
VCR Connection
DVD Connection
HDSTB Connection
External A/V Source
Digital Audio Out
PC Connection
22
23
Resolution
24
Basic Operation
Turning On or Off
Channel Selection
Volume Adjustment
Sound Mute
25-26
25
25
25
25
Quick View
25
Input Selection
Language Selection
26
26
On Screen Menus
27
Setting up TV Channel
Auto Scan
28-30
28
Add/Delete Channel
EPG(Electronic Program Guide)
29
30
Picture Controls
31-33
31
Auto Picture Controls
Manual Picture Controls
Color Temperature
32
33
Advanced Video
34-39
34
Dynamic Noise Reduce
Black Level Extender
White Peak Limiter
35
36
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
CTI
Flesh Tone
Adaptive Luma Control
37
38
39
Sound Controls
40-42
40
Auto Sound Controls
Manual Sound Controls
Auto Volume Control
Stereo/SAP Broadcast Setup
41
42
42
Time Setting
44-47
43
Time Zone Setting
Auto Time Setting
Manual Time Setting
Auto On/Off Time Setting
Sleep Timer
44
45
46
47
Captions
49-50
48
Closed Caption-Analog
Closed Caption-Digital
Closed Caption Options
49
50
Reset
51
Reset Default
51
Parental Control
52-60
52
Enter the your password
Set Password
52
Rating Enable/Disable
TV Ratings for USA
Movie Ratings
53
54-55
56
TV Rating English for Canada
TV Rating French for Canada
Downloadable Rating
Clean All
57
58
59
60
Setting the PC Mode
Auto Picture Controls
Manual Picture Controls
Color Temperature
Auto Adjustment
61-65
61
62
63
64
Manual Adjustment
65
Special Functions
66
Picture Format
66
Specification
67
68
Troubleshooting
Warranty Card
Registration Card
70
71-72
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Accessories
Supplied Accessories
Ensure that the following accessories are included with your product.
If an accessory is missing, please contact the dealer where you purchased the product.
User must use shielded signal interface cables with ferrite cores to maintain standard compliance for
the product.
1. Remote
2. Batteries
3. Power Cord
4. Owner's Manual
Installing Batteries
1
2
3
Open the battery cover
on the back side.
Insert two batteries in
correct polarity, match
(+ with +), and match
(- with -).
Close the battery cover.
Don't mix old batteries
with new batteries.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls
Front Panel
VOL
VOL
CH
1
2
CH
TV/AV
MENU
3
4
5
6
1. VOL + / VOL -
Adjusts menu setting.
Adjusts sound level.
2. CH + / CH -
Select a channel.
3. TV/AV
Selects the TV, AV, S-Video, YPbPr, VGA or HDMI mode.
4. MENU
Display on screen menus.
5. POWER
Switches the set on or off.
6. Power Indicator
Illuminates in bright blue when the TV is in standby mode.
Illuminates in dark blue when the TV is switched on.
Remote control sensor
Accepts the IR signal of remote controller.
NOTE
Here shown may be somewhat different from your set.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls
Rear Panel
COMPONENT IN
HDMI/DVI
IN
RGB IN
(PC)
AUDIO IN
(RGB/DVI)
ANTENNA/
CABLE IN
DIGITAL AUDIO
OUT(COAXIAL)
S-VIDEO
IN
L
R
AV IN
L
AUDIO
R
Y
Pb
Pr
VIDEO
VIDEO
AUDIO
1
2
3
4
5
6
7
8
1. HDMI/DVI IN
Connect to the HDMI jack for device with HDMI 5. AV IN
output. (This input can also be used as a DVI
connection with an HDMI to DVI adaptor and
separate analog audio inputs.)
Connect RCA cable to an appropriate external
A/V device such as VCR, DVD or Camcorder.
6. AUDIO IN (RGB/DVI)
2. RGB IN (PC)
Connect to the audio output jack on your PC.
Connect to the video output jack on your PC.
7. ANTENNA/CABLE IN
Connect to your antenna or cable box for TV
signal.
3. COMPONENT IN
Video/Audio inputs for Component.
4. S-VIDEO IN
8. DIGITAL AUDIO OUT(COAXIAL)
Connect digital audio to various types of equip-
ment.
Connect the output of an S-VIDEO device to
the S-VIDEO input.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls
Remote Control
- All the functions can be controlled with the remote control handset.
- Some functions can also be adjusted with the buttons on the side panel of the set.
- Before you use remote control handset, please install the batteries.
1. POWER
Switches the set on or off.
2. SOURCE
POWER
SOURCE
Selects the TV, AV, S-Video, YPbPr, VGA or HDMI
mode.
1
3
2
1
4
7
2
5
8
0
3
6
9
3. NUMBER BUTTONS
Selects channel numbers.
4. Hyphen(
)
5
8
Press to select DTV channels.
For example, to select channel ‘10-1’, press ‘10’ then
press ‘ ’ and ‘1’.
4
6
EXIT
VOL
CH
7
5.
Switch to the previous channel number.
9
OK
6. VOL+ / VOL-
MENU
MUTE
Adjusts sound level.
IPI
ISI
SEELP ZOOM
7. CH+ / CH-
Select a channel.
CC
MTS
EPG DISPLAY
8. EXIT
Clear all on-screen menus and return to TV viewing
from any menu.
9.
Navigational Controls
Adjusts menu settings.
Selects menu item.
Accepts your selection.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls
10. MENU
Display on screen menus.
11. MUTE
Switches the sound on or off.
POWER
SOURCE
12.
13.
1
4
7
2
5
8
0
3
6
9
Recalls your preferred picture setting.
Recalls your preferred sound setting.
14. SLEEP
Sets the sleep timer.
EXIT
VOL
CH
15. ZOOM
Selects your desired picture format.
OK
16. CC
Select the Caption menu directly.
MENU
MUTE
11
14
15
10
13
12
IPI
ISI
SEELP ZOOM
17. MTS
Select MTS sound : Mono, Stereo and SAP in Analog
CC
MTS
EPG DISPLAY
Channel.
16
17
19
18
Change the audio language in DTV Channel.
18. EPG
Displays the program guide.
19. DISPLAY
Shows the present screen information.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Wall mount Installation
4 inches
4 inches
4 inches
4 inches
4 inches
The set can be installed on a wall as shown above.
For proper ventilation, allow a clearance of 4 inches on all four sides from the wall.
Detailed instructions are available from your dealer, refer to the optional Wall Mounting Bracket
Installation and Setup Guide. (Wall Mount Sold Separately)
Desktop Pedestal Installation
4 inches
4 inches
4 inches
4 inches
The set can be mounted on a desk as shown above.
For proper ventilation, allow a clearance of 4 inches on each side from the wall.
Detailed instructions are available from your dealer, refer to the optional Desktop Stand Installation and
Setup Guide.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Antenna Connection
Multi-family Dwellings/ Apartments
(Connect to wall antenna socket)
AUDIO IN
(RGB/DVI)
ANTENNA/
CABLE IN
DIGITAL AUDIO
OUT(COAXIAL)
AV IN
L
R
VIDEO
AUDIO
Wall Antenna Socket
RF Coaxial Wire (75 ohm)
Turn clockwise to tighten.
VHF
UHF
Outdoor Antenna
Be careful not to bend the bronze wire when
connecting to an antenna port.
* Separately purchase a RF Coaxial Wire(75 ohm)
Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna)
NOTE
AUDIO IN
(RGB/DVI)
ANTENNA/
CABLE IN
DIGITAL AUDIO
OUT(COAXIAL)
AV IN
L
- To improve the picture quality in a poor
signal area, please purchase a signal
amplifier and install properly.
VIDEO
R
AUDIO
- If the antenna is not installed properly,
contact your dealer for assistance.
VHF
UHF
Signal
Amplifier
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
VCR Connection
- To avoid picture noise (interface), leaves an adequate distance between the TV and the VCR.
A When connecting with an antenna
1. Connect the Antenna out socket of the VCR to
the Antenna input socket on the TV.
VCR
ANT IN
2. Press the PLAY button on the VCR and match
(R) AUDIO (L)
VIDEO
the appropriate input selection between the TV
and VCR for viewing.
OUT
IN
ANT OUT
S-VIDEO
AUDIO IN
(RGB/DVI)
ANTENNA/
CABLE IN
DIGITAL AUDIO
OUT(COAXIAL)
AV IN
L
VIDEO
R
AUDIO
Back panel of the set
A When connecting with an RCA cable
1. Connect the AUDIO/VIDEO jacks between TV
and VCR. Match the jack colors (Video = yel-
low, Audio Left = white, and Audio Right = red)
VCR
ANT IN
VIDEO (L) AUDIO (R)
OUT
IN
ANT OUT
S-VIDEO
OUTPUT
SWITCH
2. Insert a video tape into the VCR and press
PLAY on the VCR.
3. Select the AV input source with using the
SOURCE button on the remote control.
COMPONENT IN
4. Refer to the VCR manual for operating instruc-
tions.
S-VIDEO
IN
L
R
AV IN
L
AUDIO
Y
Pb
VIDEO
Pr
VIDEO
R
AUDIO
Back panel of the set
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
A When connecting with an S-Video cable
1. Connect the S-VIDEO output of the VCR to the
S-VIDEO input on the set. The picture quality is
improved; compared to normal composite (RCA
cable) input.
VCR
ANT IN
VIDEO (L) AUDIO (R)
OUT
IN
ANT OUT
S-VIDEO
OUUT
SWH
2. Connect the audio outputs of the VCR to the
AV AUDIO L, R input jacks on the set.
3. Insert a video tape into the VCR and press
PLAY on the VCR.
COMPONENT IN
S-VIDEO
IN
L
R
AV IN
L
AUDIO
4. Select the S-Video input source with using the
Y
Pb
Pr
VIDEO
R
AUDIO
VIDEO
SOURCE button on the remote control.
Back panel of the set
5. Refer to the VCR manual for operating instruc-
tions.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
DVD Connection
A When connecting with a S-Video cable
1. Connect the S-VIDEO output of the DVD to the
DVD
S-VIDEO input on the set.
ANT IN
VIDEO (L) AUDIO (R)
OUT
IN
ANT OUT
S-VIDEO
2. Connect the audio outputs of the DVD to the
OUUT
SWH
AV AUDIO L, R input jacks on the set.
3. Turn on the DVD player, insert a DVD.
4. Select S-Video input source with using the
SOURCE button on the remote control.
COMPONENT IN
S-VIDEO
IN
L
R
AV IN
L
AUDIO
5. Refer to the DVD player's manual for operating
instructions.
Y
Pb
Pr
VIDEO
R
AUDIO
VIDEO
Back panel of the set
A When connecting with a Component cable
DVD
1. Connect the video outputs (Y, PB, PR) of the
DVD to the COMPONENT VIDEO(Y, Pb, Pr)
jacks on the set.
(L) AUDIO (R)
Y
Pb
Pr
2. Connect the audio outputs of the DVD to the
COMPONENT AUDIO L, R jacks on the set.
3. Turn on the DVD player, insert a DVD.
COMPONENT IN
S-VIDEO
IN
L
R
4. Select YPbPr source with using the SOURCE
AV IN
AUDIO
Y
Pb
VIDEO
Pr
VIDEO
L
R
button on the remote control.
AUDIO
Back panel of the set
5. Refer to the DVD player's manual for operating
instructions.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
A When connecting with a HDMI cable
1. Connect the HDMI output of the DVD to the
DVD
HDMI/DVI IN jack on the set.
HDMI-DVD OUTPUT
2. Select HDMI input source with using the
SOURCE button on the remote control.
3. Refer to the DVD player's manual for operating
instructions.
COMPONENT IN
HDMI/DVI
IN
RGB IN
(PC)
L
R
AUDIO
Y
Pb
Pr
VIDEO
Back panel of the set
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
HDSTB Connection
- This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box.
However, if you do receive Digital signals from a digital set-top box or other digital external device,
refer to the figure as shown below.
A When connecting with a D-Sub 15 pin cable
Digital Set-top Box
1. Connect the RGB output of the digital set-top
box to the RGB IN (PC) jack on the set.
(R) AUDIO (L)
RGB-DTV OUTPUT
2. Connect the audio outputs of the set-top box to
the AUDIO IN (RGB/DVI) jack on the set.
3. Turn on the digital set-top box.
4. Select VGA input source with using the
SOURCE button on the remote control.
5. Refer to the digital set-top box manual for oper-
ating instructions.
COMPONENT IN
RGB IN
(PC)
AUDIO IN
(RGB/DVI)
S-VIDEO
IN
L
R
AV IN
L
AUDIO
VIDEO
R
Y
Pb
Pr
VIDEO
AUDIO
Back panel of the set
A When connecting with a HDMI cable
Digital Set-top Box
1. Connect the HDMI output of the digital set-top
box to the HDMI/DVI IN jack on the set.
HDMI-DVD OUTPUT
2. Turn on the digital set-top box.
3. Select HDMI input source with using the
SOURCE button on the remote control.
4. Refer to the digital set-top box manual for oper-
ating instructions.
COMPONENT IN
HDMI/DVI
IN
RGB IN
(PC)
L
R
AUDIO
Y
Pb
Pr
VIDEO
Back panel of the set
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
A When connecting with a Component cable
Digital Set-top Box
1. Connect the video outputs (Y, PB, PR) of the
digital set-top box to the COMPONENT
VIDEO(Y, Pb, Pr) jacks on the set.
(L) AUDIO (R)
Y
Pb
Pr
2. Connect the audio outputs of the digital set-top
box to the COMPONENT AUDIO L, R jacks on
the set.
3. Turn on the digital set-top box.
COMPONENT IN
S-VIDEO
IN
L
R
AV IN
AUDIO
Y
Pb
VIDEO
Pr
VIDEO
L
R
4. Select YPbPr source with using the SOURCE
AUDIO
button on the remote control.
Back panel of the set
5. Refer to the digital set-top box manual for oper-
ating instructions.
A When connecting with a HDMI to DVI cable
1. Connect the DVI output of the digital set-top
Digital Set-top Box
box to the HDMI/DVI IN jack on the set.
DVI-DTV OUTPUT
(R) AUDIO (L)
2. Connect the audio outputs of the set-top box to
the AUDIO IN (RGB/DVI) jack on the set.
3. Turn on the digital set-top box.
4. Select HDMI input source with using the
SOURCE button on the remote control.
COMPONENT IN
HDMI/DVI
IN
RGB IN
(PC)
AUDIO IN
(RGB/DVI)
S-VIDEO
IN
L
R
AV IN
L
AUDIO
5. Refer to the digital set-top box manual for oper-
ating instructions.
VIDEO
R
Y
Pb
Pr
VIDEO
AUDIO
Back panel of the set
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
External A/V Source
1. Connect the AUDIO/VIDEO jacks between TV
and external equipment. Match the jack colors |