SY-KT333 DRAGON Lite
Motherboard
Quick Start Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
SY-KT333 DRAGON Lite Quick Start Guide
1
Introduction
Guide illustrates the steps for installing and setting up your new motherboard.
Congratulations on your purchase of the SY-KT333 DRAGON Lite motherboard. This Quick Start
This guide provides all users with the basic steps of motherboard setting and operation. For further
information, please refer to the SY-KT333 DRAGON Lite motherboard User’s Manual that came with
your motherboard.
Unpacking
When unpacking the motherboard, check for the following items:
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
The SY-KT333 DRAGON LiteAGP/PCI Motherboard
The user manual
The Installation CD-ROM
SOYO Bonus Pack CD-ROM
One IDE DeviceATA66 Flat Cable
One Floppy Disk Drive Flat Cable
One Heat Sink Compound
Two motherboard Spacer Support
3
Download from Www.Somanuals.com. All Manuals Search And Download.
SY-KT333 DRAGON Lite Quick Start Guide
SY-KT333 DRAGON Lite Motherboard Layout
PS/2 KB
Connector
PS/2 Mouse
Connector
USB 1_2
COM 1
ATX Power
COM 2
PRT
LINE-OUT
LINE-IN
MIC
IDE 1 IDE 2
GAME PORT
AGP Slot
H/W
Audio
FDC1
PCI Slot #1
1
4
PCI Slot #2
PCI Slot #3
PCI Slot #4
JP44
3
WOL
Header
VT8233A
1
Super
I/O
USB 2.0
CHIP
3V
Lithium
Battery
PCI Slot #5
JP5
1
3
13
1
2
14
SMCARDCN
4
Download from Www.Somanuals.com. All Manuals Search And Download.
SY-KT333 DRAGON Lite Quick Start Guide
Key Features
ꢁ
ꢁ
Supports SocketA AMD®K7 processors
ꢁ
ꢁ
ꢁ
ꢁ
ꢁ
ꢁ
Supports suspend to RAM (STR)
Supports 5 sets of voltage monitoring
On-board hardware audio
-
Supports 200/266 MHz Front Side Bus
Athlon /XP CPU (750MHz ~ 2100+)
-
Duron/Morgan CPU (650MHZ ~
1.2GHz)
Power failure resume
Supports 200/266/333 DDR (Double Data
Rate) module
Supports multiple-boot function
Smart Card Reader
ꢁ
ꢁ
PC99,ACPI
- Compliant with Personal Computer Smart
Card(PC/SC)Working Group standard
Ultra DMA33/66/100/133
(ATA33/66/100/133)
- Compliant with smart card
protocols
(
ISO 7816
)
ꢁ
ꢁ
Supports Wake-On-LAN (WOL)
Power-on by modem and alarm and PS/2
Keyboard
- Supports card present detect
- Supports Smart Card insertion power-on
feature
ꢁ
ꢁ
Supports onboard hardware monitoring
Easy CPU settings in BIOS with the “SOYO
COMBO Setup”
ꢁ
ꢁ
ꢁ
ꢁ
ꢁ
ꢁ
1 x IrDAport
3 x DIMM slots for DDR RAM memory
5 x 32-bit bus master PCI slots
1 xAGP slot
- CPU FSB frequency
- CPU multiplier
- CPUVcore voltage
- DDR RAM Clock
- DDR Voltage
4 x USB ports onboard
ATX power connector
-AGPVoltage
5
Download from Www.Somanuals.com. All Manuals Search And Download.
SY-KT333 DRAGON Lite Quick Start Guide
2
Installation
To avoid damage to your motherboard, please follow these simple rules while handling
this equipment:
ꢂ
Before handling the motherboard, ground yourself by touching on to an unpainted portion of the
system's metal chassis.
ꢂ
ꢂ
Remove the motherboard from its anti-static packaging. Hold the motherboard by the edges
and avoid touching its components.
Check the motherboard for damage. If any chip appears to be loose, press carefully to seat it
firmly in its socket.
Follow the directions in this section which is designed to guide you through a quick and correct method
to install your new SY-KT333 DRAGON Lite motherboard. For detailed information, please refer to the
SY-KT333 DRAGON Lite motherboard User's Manual and Technical Reference online manual on the
CD-ROM package that came with your motherboard.
Gather and prepare all necessary components to complete the installation successfully:
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
SocketAprocessor with built-in CPU cooling fan (boxed type)
DDR RAM module(s)
Computer case with adequate power supply unit
Monitor
PS/2 Keyboard
Pointing Device (PS/2 Mouse)
Speaker(s) (optional)
Disk Drives: HDD, CD-ROM, Floppy drive…
External Peripherals: Printer, Plotter, and Modem (optional)
Internal Peripherals: Modem and LAN cards (optional)
Note: If you want to use an external speaker connected to "Line-out" port, please make sure to use an
"amplified speaker" that can generate proper output sound volume.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
SY-KT333 DRAGON Lite Quick Start Guide
We will now begin the installation process. Please follow the step-by-step
procedure designed to lead you to a complete and correct installation.
Step 1-Assembling the motherboard to the case
Step 2- Install the Central Processing Unit (CPU)
Step 3- Install memory modules
Step 4- Install expansion cards
Step 5- Connect cables, case wires, and power supply
Install the Motherboard
Step 1. Assembling the motherboard to the case
To avoid shorting the motherboard to the case,
please use the provided spacer support on this
screw hole…
DIMM3
DIMM1
7
Download from Www.Somanuals.com. All Manuals Search And Download.
SY-KT333 DRAGON Lite Quick Start Guide
Step 2. Install the CPU
CPU Mount Procedure: To mount theAMD®K7Athlon & DuronTM processor that you have
purchased separately, follow these instructions.
1
2
3
4
1. Lift the socket handle up to a vertical position.
2. Align the blunt edge of the CPU with the matching pinhole edge on the socket.
3. Seat the processor in the socket completely and without forcing.
4. Then close the socket handle to secure the CPU in place.
Remember to connect the CPU Cooling Fan to the appropriate power connector on
the motherboard. The fan is a key component that stabilizes the system. It prevents the
equipment from overheating and prolongs the life of your CPU.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
SY-KT333 DRAGON Lite Quick Start Guide
CPU Fan Installation
Your SocketAprocessor kit comes with a cooling fan. Mount the fan on the processor according to the instructions provided
by the manufacturer. The fan is a key component that will ensure system stability. The fan prevents overheating, therefore
prolonging the life of your CPU.
Note:Remember to connect the fan tothe appropriate power source.
CPU Fan Mount Procedure: To prevent scratch or damage on the motherboard, please follow the
instructions on how to mount the CPU fan properly.
1. Apply thermal paste to the die of the CPU.
2. Carefully mount the fan on top of the CPU and clip-on the first lock.
1
9
Download from Www.Somanuals.com. All Manuals Search And Download.
SY-KT333 DRAGON Lite Quick Start Guide
3. Clip-on the second lock and please make sure not to damage/scratch the board.
2
4. The fans power connector should be connected to CPUFAN1.
DIMM3
DIMM1
Note: If the fan is defective or power connector is not connected to CPUFAN1, the system will enable Fan
Off Control function. See below for more information on FOC function.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
SY-KT333 DRAGON Lite Quick Start Guide
FOC (Fan-Off Control)
The newly designed SOYO “FOC” is based on the concept of total protection for CPU, which is very
different from currently seen on the market. The H/W control function is used tosee a passive security
system of monitoring and warning. S/WSimultaneous Signal Follow-ups techniques andAuto Power Off
System are included to prevent all possible damage caused by the malfunctioning of the CPU fan. With the
help of “O/S OnTime MonitoringAndWarning” function, provided by the H/Wmonitoring system, the
double-protection purpose is achieved.
“FOC” includes the following functions:
(1) Simultaneous Signal Follow Ups: Before the system enters the O/S, H/Wwill detect the signals
of the CPU fan pins, get their revolution information and send it to the BIOS.
(2) Auto Power Off System: If the BIOS receives the information of CPU fan revolution, it continues
to function normally. If no signalis received, it will inform the systemand disconnects the power
supply immediately to protect the CPU from overheating.
Note:The following must be observed to secure the normal functioning of “Fan-Off Control”:
1. FOC only works on CPUFAN 1.
2. CPU fan with sensor pins must be used.
3. CPU fans approved byAMD are strongly recommended.
The “HOTKEY” function is provided for the CPU fans without sensor pins, to avoid the power off. Users
may press the “Insert” key to jump over the “Power Off” mode; go to the BIOS and disable “FOC”. Now
system can be booted normally.
We provide the following User-Friendly protection features:
1. Fan-Off Control : The motherboard detects the status of the CPU fan and protects the CPU by
automatically disconnecting the power supply. The default value of this function is Enable.
After booting up, the user may disable it.
2. Heat Dissipation Paste: Heat Dissipation Paste is included for all Socket-Amotherboards, to
enhance the heat dissipation capability.
Furthermore, we strongly recommend our users to enable the function of H/W monitoring in
the BIOS. This function, together with the FOC, provides the total protection to the CPU and
allows it to maximize its performance.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
SY-KT333 DRAGON Lite Quick Start Guide
Step 3. Configure Memory
Your board comes with three DIMM sockets, providing support for up to 3GB of main memory using
unbuffered and non-ECC DIMM modules from 64MB to 1GB. On this motherboard, DRAM speed can
be set independent from the CPU front side bus speed. Depending on the DRAM clock speed setting in
the BIOS setup, appropriate memory modules must be used. For 100MHz DRAM speed, use
PC1600 memory; for 133MHz DRAM speed, use PC2100 memory; for 166 MHz DRAM speed, use
PC2700 memory.
Memory Configuration Table
Number of Memory
DIMM 1
DIMM 2
DDR RAM
DIMM 3
Modules
RAM Type
Memory Module Size
(MB)
64 / 128 / 256 / 512 / 1024 MB
Step 4 Install Expansion Card
The motherboard has 1AGPPRO slot and 5 PCI slots.
1. Read the related expansion card’s instruction document before inserting the expansion card into
the computer.
2. Press the expansion card firmly into expansion slot in motherboard.
3. Be sure the metal contacts on the card are indeed seated in the slot.
4. Replace the screw to secure the slot bracket of the expansion card.
5. Install related driver from the operating system.
Step 5 Connections to the Motherboard
This section tells how to connect internal peripherals and the power supply to the motherboard.
The internal peripherals consist of IDE devices (HDD, CD-ROM), Floppy Disk Drive, Chassis Fan, Front
Panel Devices (Internal Speaker, Reset Button and IDE LED Switch.), Wake-On-LAN card, VGAcard,
Sound Card, and other devices.
For more details on connecting internal and external peripherals to your new SY-KT333 DRAGON Lite
motherboard, please refer to SY-KT333 DRAGON Lite motherboard User's Manual and Technical
Reference online manual on the CD-ROM.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
SY-KT333 DRAGON Lite Quick Start Guide
Connectors and Plug-ins
Standard IrDA(Infrared Device Header):SIRCON
Wake-On-LAN Header: JP44
Pin1 Pin2 Pin3
5V-SB GND MP_Wakeup
Pin1 Pin2 Pin3 Pin4 Pin5 Pin6 Pin7 Pin8 Pin9 Pin10
VCC NC IRRX GND IRTX VCC NC CIRRX GND CIRTX
SMCARDCN
Pin1 Pin2 Pin3 Pin4 Pin5 Pin6 Pin7 Pin8 Pin9 Pin10 Pin11 Pin12 Pin13 Pin14
VCC NC NC NC Scrfet RST CLK NC NC Scrio GND Scrpres NC
NC
USB3
USB4
Pin8
Pin1
Pin2
Pin3
Pin4
Pin6
Pin7
Pin9
Pin10
GND
Power
Data(-)
Data(+)
GND
Power
Data(-)
Data(+)
GND
CPU CoolingFan: CPUFAN1
CPU Cooling Fan:CPUFAN2
Pin1
Pin2
Pin3
Pin1
Pin2
Pin3
GND
12V
Chassis Fan: CHAFAN1
Pin2
SENSOR
GND
12V
NC
Chassis Fan: CHAFAN2/3
Pin1
Pin3
Pin1
Pin2
12V
Pin3
NC
CONTROL
12V
SENSOR
GND
CD -IN: CDIN1 / CDIN2
Pin1
L
Pin2
G
Pin3
G
Pin4
R
CDIN1
CDIN2
Connect the CD Line-in cord from the CR-ROM
device to the matching connector CDIN
G
L
G
R
Power LED
Pin2
Speaker
Power LED
Pin1
VCC
Pin3
NC
GND
Speaker
Pin3
Pin1
Pin2
NC
Pin4
Reset PWRBT
HDD LED
VCC
NC
Speaker out
RESET
HDD LED
PWRBT
Pin1
Pin2
LED Cathode
Pin1
Power On/Off
Pin2
Pin1
Pin2
LEDAnode
GND
Control PIN
GND
ATX Power On/Off: PWRBT
Connect your power switch to this header (momentary switch type).
To turn off the system, press this switch and hold down for longer than 4 seconds.
ATX Power Supply:ATX PW
Attach theATX Power cable to this connector. (This motherboard requires anATX power supply, anATpower supply can
NOTbe used.)
When using the Power-On by PS/2 Keyboard function, please make sure theATX power supply is able to provide at least
720mAon the 5V Standby lead (5VSB) in order to meet the standardATX specifications.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
SY-KT333 DRAGON Lite Quick Start Guide
CMOS Clear (JP5)
In some cases the CMOS memory may contain wrong data, follow the steps below to clear the CMOS
memory.
1. Put the jumper back to 1-2 to allow writing of new data into the CMOS memory.
2. Clear the CMOS memory by momentarily shorting pin 2-3 on jumper JP5. This jumper can be
easily identified by its white cap.
CMOS Clearing
Retain CMOS Data
Clear CMOS Data
Short pin 2-3 for
at least 5 seconds to
clear the CMOS
Short pin 1-2 toretain
new settings
JP5 Setting
1 2 3
1 2 3
Note: You must unplug theATX power cable from theATX power connector when
performing the CMOS Clear operation.
Audio Speakers connections
When using 2 channel speaker, connect the speaker cable to line-out.
If you’re using 4 channel speaker, connect the front L/R speakers to line-out and rear L/R speakers to
Line-in. make sure to set the audio software for 4 channel speaker system.
Line-out
Line-in
14
Download from Www.Somanuals.com. All Manuals Search And Download.
SY-KT333 DRAGON Lite Quick Start Guide
3
Quick BIOS Setup
This motherboard does not use any hardware jumpers to set the CPU frequency. Instead, CPU settings
are software configurable with the BIOS [SOYO COMBO FEATURE]. The [SOYO COMBO
FEATURE] combines the main parameters that you need to configure, all in one menu, for a quick
setup in BIOS.
After the hardware installation is complete, turn the power switch on, then press the <DEL> key during the
system diagnostic checks to enter the Award BIOS Setup program. The CMOS SETUP UTILITY will be
shown on the screen. Then, follow these steps to configure the CPU settings.
Step 1. Select [STANDARD CMOS SETUP]
Set [Date/Time] and [Floppy drive type], then set [Hard Disk Type] to “Auto”.
Step 2. Select [LOAD OPTIMIZED DEFAULTS]
Select the “LOAD OPTIMIZED DEFAULTS” menu and type “Y” at the prompt to load the BIOS optimal
setup.
Step 3. Select [SOYO COMBO FEATURE]
Set the [CPU Frequency Select] to 100/133MHz, depending on the Front Side Bus of your CPU.
To overclock your CPU’s Front Side Bus, [Frequency 1MHz Stepping] enables you to overclock in
1MHz increment or you can input the desired FSB value of the CPU.
Set the [DRAM Clock] to 100/133/166 MHz or By SPD, depending on the DDR Clock. If you overclock
your CPU’s Front Side Bus, it overclocks your DDR Clock as well.
Note: The maximum FSB you can overclock for a 100MHz FSB CPU is 132MHz and 233MHz for
133MHz FSB CPU.
DDRAM clock speed should not be lower than the CPU speed. Ex, if you have a 133MHz FSB
CPU, BIOS will not have 100MHz option in the DRAM clock.
SOYO is not responsible for damage done in your CPU or system instability due to
overclocking.
Step 4. Select [SAVE & EXIT SETUP]
Press <Enter> to save the new configuration to the CMOS memory, and continue the boot sequence.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
SY-KT333 DRAGON Lite Quick Start Guide
4
The SOYO CD
The SOYO-CD will Auto Run only in Windows Base Operating System .
Your SY-KT333 DRAGON Lite motherboard comes with a CD-ROM labeled "SOYO CD." The
SOYO CD contains
a.
b.
c.
The user's manual for your new motherboard -in PDF format,
The drivers software available for installation, and
Adatabase in HTMLformat with information on SOYO motherboards and other
products.
Step 1. Insert the SOYO CD into the CD-ROM drive
If you are running Windows NT/2K/XP, the SOYO-CD will not detect your motherboard type. In that case
the following dialog will pop up. Please choose your motherboard model number and press OK.
Now the SOYO-CD Start Up Menu will come up as shown on the following page
(SOYO CD Start Up Program Menu)
Under Windows 95/98/ME, the SOYO CD Start Up Program automatically detects the SOYO
motherboard the system uses and displays the corresponding model name.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
SY-KT333 DRAGON Lite Quick Start Guide
The user's manual files included on the SOYO CD are in PDF (Postscript Document) format. In order
to read a PDF file, the appropriateAcrobat Reader software must be installed in your system.
Note: The Start Up program automatically detects if theAcrobat Reader utility is already present in
your system, and otherwise prompts you on whether or not you want to install it. You must install the
Acrobat Reader utility to be able to read the user's manual file. Follow the instructions on your screen
during installation, then once the installation is completed, restart your system and re-run the SOYO
CD.
Step 2. Install Drivers and Utilities
The following drivers need to be installed in order for the system to operate properly
1. VIA4 in 1 driver.
2. C-Media 4 channel audio driver. – Only required if you are using the onboard audio.
The rest of the available drivers are optional.
Click the Install Drivers button to display the list of drivers software that can be installed with your
motherboard. The Start Up program displays the drivers available for the particular model of
motherboard you own. We recommend that you only install those drivers.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
SY-KT333 DRAGON Lite Quick Start Guide
driver
VIA 4 in 1 Driver Package for Win 9x/ME/NT/2k/XP
revision:
C-MEDIA 4-channel onboard audio Driver/Application for Win 9x/ME/2000/NT/XP
KT333 DRAGON Lite hardware monitor for Win 9x/ME/2000/NT/XP
KT333 DRAGON Lite ITE SIM card reader driver for Win 9x/ME/2000/NT/XP(english)
C-MEDIA 4-channel onboard audio Driver for NT4.0 Installation
Cancel
OK
(Driver Installation Menu)
A short description of all available drivers follows:
ꢁ VIA 4 in 1 Driver Package for Win 9x/ME/NT/2k/XP
VIA4 In 1 driver includes four system drivers to improve the performance and maintain
the stability of systems using VIAchipsets. These four drivers are :
VIARegistry (INF) Driver, VIAAGP VxD driver, VIAATAPI Vendor Support Driver and
VIAPCI IRQ Miniport Driver. For Windows NT users, the VIAIDE Bus Mastering driver is
the only driver to be installed in your system.
Adescription of 4 drivers follows:
Bus Master PCI IDE Driver
TheATAPI IDE driver enables the performance enhancing bus mastering
functions onATA-capable Hard Disk Drives and ensures IDE device compatibility.
AGP VxD Driver
VIAAGP VxD Driver is to be installed if you are using anAGP VGAdevice.
VIAGART.VXD will provide service routines to your VGAdriver and interface
directly to hardware, providing fast graphical access.
VIAChipset Functions Registry
VIARegistry (INF) Driver is to be installed under Windows. The driver will enable
the VIAPower Management function.
IRQ remapping utility (This driver is installed automatically)
VIAPCI IRQ Miniport Driver is to be installed under Windows 98 only, it sets the
system's PCI IRQ routing sequence.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
SY-KT333 DRAGON Lite Quick Start Guide
ꢁ C-MEDIA 4-channel Onboard Audio Driver/Application for Win 9x/ME/
2000/NT/XP
1. The driver supports 2/4/6 speakers 3D positional audio.
2. The application is include CD Player/MIDI Player/MP3/Wave Player/Mixer with the
control over your PC’s audio functions.
ꢁ KT333 DRAGON Lite hardware monitor for Win 9x/ME/2000/NT/XP
Your motherboard comes with a hardware monitoring IC. By installing this utility
Temperature, Fan speed and Voltages can be monitored. It is also possible to set alarms
when current system values exceed or fall below pre-set values.
ꢁ KT333 DRAGON Lite ITE SIM card reader driver for Win 9x/ME/2000/NT/
XP(english)
If you have reader card, it must be installed.
Select which driver you want to install and click OK, or click Cancel to abort the driver
installation and return to the main menu.
Note: Once you have selected a driver, the system will automatically exit the SOYO CD
to begin the driver installation program. When the installation is complete, most drivers
require to restart your system before they can become active.
Step 3. Check the Latest Releases
Click the 'Check the latest Releases' button to go the SOYO Website to automatically
find the latest BIOS, manual and driver releases for your motherboard. This button will
only work if your computer is connected to the internet through a network or modem
connection. Make sure to get your modem connection up before clicking this button.
(* Internet Explorer is a Microsoft Trademark)
19
Download from Www.Somanuals.com. All Manuals Search And Download.
SY-KT333 DRAGON Lite Quick Start Guide
5
Audio Driver Installation
Audio Driver Installation for Windows 98/98se.
After you have installed the audio driver, windows may prompt you to restart your computer.
When your computer restarted it may look for windows driver from your Win98CD and ask you to
insert your Win98/98se CD to your CD-drive.At this point you need to insert the Win98 CD to your
CD-drive and type in D:\win98 (assuming your CD-Rom in driver D).
Audio Driver Installation for Windows NT
1. Double click my computer.
2. Double click control panel.
3. Double click multimedia and select devices.
4. SelectADD and select OK.
5. Click on “Browse” then point it to the SOYO CD for theAudio driver.
6. The audio driver path is in SOYO CD “D:\audio\cmi8738_6ch\Win_NT40\drv”
(where D: is your CD-ROM).
20
Download from Www.Somanuals.com. All Manuals Search And Download.
SY-KT333 DRAGON Lite Quick Start Guide
Quick Trouble shoot tips
Boot-up Issues
The system do not power-up, no beeping sound heard and the CPU fan does not turn
on.
1. Check if the power cord is plug to the power source.
2. Check if the power is connected to the M/B.
3. Check if the cable of the case power button is connected to the M/B power button
connector (see connectors and plug-ins in the manual for more info).
4. Make sure the power supply is not defective. Change the power supply. The
minimum should be 250 watts.
5. Remove the M/B fromthe case and test the system. The M/B might be shorted to the case.
The system power-up, no video, no beeping sound heard, but the CPU fan is turning.
1. Clear CMOS battery. (JP5 connector, see Quick start guide for more info on how
to clear the CMOS).
2. Check all the jumper settings on the M/B. (if the M/B have any).
3. Check if the CPU is ok by using another CPU (check the Quick start guide for
CPU supported on this M/B).
4. Check if the power supply is ok. The minimum should be 250 watts.
5. Make sure the CPU fan is connected to CPUFAN1 connector.
6. Remove the M/B from the case and test the system. The M/B might be shorted to
the case.
The system power-up, no video, beeping heard.
1. Clear CMOS battery. (JP5 connector, see Quick start guide for more info on how
to clear the CMOS).
2. Check all the jumper settings on the M/B. (if the M/B have any).
3. Check the memory module and theVGAcard if inserted properly on the M/B.
4. If yes, change the memory module, it might be defective. Make sure the memory
specification is supported by the M/B. (for more info on this, check our FAQ
website).
5. Change the VGAcard.
The system turns on for some seconds then shutdown by itself.
1. Check if the CPU fan is connected to the CPUFAN1 connector.
2. The CPU might be overheating. Check the CPU FAN if it is defective or see if the
CPU fan is in contact with the CPU.
3. Clear CMOS battery. (JP5 connector, see Quick start guide for more info on how
to clear the CMOS).
21
Download from Www.Somanuals.com. All Manuals Search And Download.
SY-KT333 DRAGON Lite Quick Start Guide
4. If you already checked the power supply specification, change the power supply it
might be defective. The minimum is 250 watts.
When I boot up my system, everything works fine, it sees my CPU and memory,
detects my hard drive, floppy drive and CD-ROM but locks up at "Verify DMI pool
data... ". Don't go any further. What should I do?
1. Clear CMOS battery. (JP5 connector, see Quick start guide for more info on how
to clear the CMOS).
2. If still has the problem, remove all other add-on cards except video card see if it
move further. Then put peripherals in one by one to identify which one cause the
lockup.
3. Change the CPU.
During Boot-up, my computer says CMOS memory Checksum error. What is the
problem?
1. Clear CMOS memory.
2. Re-flash BIOS. Check on how to flash BIOS on the later part of this book.
3. Change the CMOS battery, the battery might be drained.
4. The BIOS chip might be failing.
I hear 3 beep sound before the system boot-up, is this normal?
Yes, this is normal. This is to inform the user that the system is still booting up.
I hear 1-2 beeping sound and then the system shutdown, what is the problem?
Make sure to connect the CPU fan to CPUFAN1 connector.
Stability Issue
My system intermittently locks up, very unstable
1. Check the CPU Temp, it might be overheating. Change the CPU FAN.
2. Do not over clock your CPU
3. Check the specification of the memory module, maybe the M/B do not support it.
4. Go to BIOS setup and load fail safe settings. Please check if the system
performance in the BIOS setup is set toTurbo/Maximum.
5. Check website for latest BIOS update.
6. Check website for FAQ’s regarding instability issue.
7. Change the memory module or CPU.
8. The power supply might not have enough wattage to support all the peripherals. If
your system has other peripherals connected, like CD-RW, extra HDD, etc.
disconnect them.
9. Install VIA4 in 1 driver.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
SY-KT333 DRAGON Lite Quick Start Guide
My system intermittently locks up, during Windows installation.
1. Go to BIOS and load “load optimized default”.
2. Check website for any BIOS update.
3. If still has the problem, remove all other add-on cards except CPU/Memory/
Video card/Hard disk. See if you can finish Windows installation. Then put
peripherals in one by one to identify which one cause the lockup.
My system will not boot-up when I set my CPU to 133MHz FSB, works with
100MHz FSB
1. Make sure to put some thermal paste above the CPU.
2. CPU might be defective.
BIOS Issue
Where can I find the BIOS revision of my mainboard?
It will be displayed on the up-left corner on the screen during boot-up. It will show as your
board type followed by the revision number, such as kvxa_2BA1 (meaning BIOS revision
2BA1 for the SY-K7V Dragon plus! board) or 6BA+ IV_2AA2 which means SY-6BA+ IV
motherboard with 2AA2 BIOS.
Where can I find the latest BIOS of my motherboard?
Please go to the technical support page of one of the SOYO websites (Taiwan:
www.soyo.com.tw), and look up your motherboard to find the latest BIOS revision.
How can I flash the BIOS?
1. Download the BIOS on our support website.
2. Make a bootable floppy disk with out any memory manager loaded (i.e. himem,
emm386, etc…).
3. Copy the BIOS file and awdflash utility to the diskette.
4. Type "awdflash biosname.bin /sn /py".
5. Then reboot.
After flashing the BIOS, my system will not boot-up.
1. Try clearing the CMOS.
2. The BIOS chip is defected due to unsuccessful flash, contact your nearest SOYO
branch for re-flashing.
Is there a way to reprogram my BIOS after an unsuccessful flash?
No other way, you need to send back the BIOS ROM to your nearest SOYO branch for
re-flashing.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
SY-KT333 DRAGON Lite Quick Start Guide
VGAIssue
I cannot set my VGAto go higher than 16 color (640x 480).
1. Make sure that you have installed the VIA4 in 1 driver.
2. Install/ re-install the VGAdriver.
After wake-up from Suspend to RAM or Standby mode, the screen has no display but
I can hear the hard disk operating
1. Install VIA4 in 1 driver.
2. Check the VGAcard manufacturer for driver update, or make sure the VGAcard
support Suspend to Ram function.
Audio Issue
How can I disable the on-boardAudio?
Go to the SOYO Combo Feature in the BIOS setup, then set the “onboard 4CH H/W audio”
to disable.
I cannot get the sound working on my system.
1. Check if the speaker wire is connected to the line out connector in the M/B.
2. Check if the speaker power is powered on.
3. Install the audio driver supplied on our driver disc.
4. Check BIOS setup if “onboard 4CH H/W audio” is enabled.
5. If sound already installed, check our website for audio driver update.
The sound is working in my system, but when I play CD music from the CD-ROM, I
do not get any sound. What is wrong?
This is because the 3-wire audio cable from the CD-ROM to the on-board CDIN1 connector
in the M/B is not connected. See manual for location of CDIN1.
The sound from my sound card is distorted when Windows start. What is wrong?
If you are using an ISAsound card, please make sure the IRQ needed for the sound card is
set to 'Legacy ISA' in the BIOS. In other word, if your ISAsound card takes IRQ5, then set
IRQ5 to 'Legacy ISA'.
The sound and everything else works fine except that the recorder and microphone do
not work. What is wrong?
1. Please go to sound properties and check if the recorder and microphone in the are
enabled.
2. Check if Microphone is ok.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
SY-KT333 DRAGON Lite Quick Start Guide
Hard disk/FDD/CD-ROM issue
My Western digital HDD is not detected during boot-up
Change the jumper settings to cable select or single.
Sometimes the system finds my CD-ROM, sometimes not
1. Check CD-ROM if it is working properly.
2. The power supply might not have enough wattage to support all the peripherals. If
your system has other peripherals connected, like CD-RW, extra HDD, etc.
disconnect them.
When I boot up my new computer I got "floppy boot failure" and the LED on the
floppy stays on
Make sure the red wire of floppy ribbon cable goes to Pin1 on the floppy drive side (don't
trust the "key lock" or "notch") and use the end-connector of the cable (don't use middle one).
25
Download from Www.Somanuals.com. All Manuals Search And Download.
SY-KT333 DRAGON Lite Quick Start Guide
How to contact us:
ꢃ
If you are interested in our products, please contact the SOYO sales department in the
region you live.
ꢃ
If you require TechnicalAssistance, please contact our Technical Support in the region
you live.
SOYO prefers Email as communication medium, remember to always add to the email the
country that you live in.
TAIWAN
Hong Kong
SOYO COMPUTER INC.
SOYOASIALTD.
No. 21 Wu-Kung 5 Rd., Hsing Chuang
City, Taipei Hsien, Taiwan, R.O.C.
TEL: 886-2-22903300
5C, Big Star Centre, 8 Wang Kwong
Road, Kowloon Bay, Kowloon, Hong Kong
TEL: 852-2-710-9810
FAX: 852-2-710-9078
FAX: 886-2-22983322
Email: [email protected]
Email: [email protected]
USA
SOYO INC.
41484 Christy Street, Fremont, CA
94538, USA
TEL: 1-510-226-7696
FAX: 1-510-226-9218
Email: [email protected]
GM
SOYO Deutschland GmbH
(SAATTechnology GmbH)
August-Wilhelm-Kuhnholz-Str. 15,
D-26135 Oldenburg (Oldb), Germany
TEL: 49-441-209100
FAX: 49-441-203442
Email: [email protected]
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Edition: July 2002
Version 1.3
SY-KT333 DRAGON Lite
SERIAL
Download from Www.Somanuals.com. All Manuals Search And Download.
|