SY-7VCM
Motherboard
Quick Start Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
SY-7VCM Quick Start Guide
1 Introduction
Congratulations on your purchase of the SY-7VCM Motherboard. This Quick Start Guide
illustrates the steps for installing and setting up your new Motherboard.
This guide provides all users with the basic steps of Motherboard setting and operation. For
further information, please refer to the SY-7VCM Motherboard Uses’ Guide that came with
your Motherboard.
Unpacking
When unpacking the Motherboard, check for the following items:
u
u
The SY-7VCM VT82C694X AGP/PCI Motherboard
The Quick Start Guide
u
u
u
u
The Installation CD-ROM
SOYO Bonus Pack CD-ROM
One IDE Device ATA 66 Flat Cable
One Floppy Disk Drive Flat Cable
3
Download from Www.Somanuals.com. All Manuals Search And Download.
SY-7VCM Quick Start Guide
SY-7VCM Motherboard Layout
PS/2 KB
Connector
PS/2 Mouse
Connector
CPUFAN
1
HJ1
USB 1
COMA
USB 2
PRT
2
2
2
1HJ2
1
HJ3
ATX Power
1
HJ4
COMB
4
4
PHON
1
AUXIN
JOYSTICK
®
1
LINE-OUT
1
VT82C694X
4
FLP
1
1
CDIN1
1
LINE-IN
IDE 1 IDE 2
MIC JACK
AGP Slot
JP5
CMOS Cl ear
Jumper
3
CODEC
AC97
PCI Slot #1
PCI Slot #2
1
VT82C686A
3
1
JP10
WOL
Header
SIRCON
1
5
PCI Slot #3
1USB4
Reset
HDD LED PWRBT
3V
_
5
1
Lithium
Battery
_
1USB35
Speaker
CHAFAN
Power
LED
4
Download from Www.Somanuals.com. All Manuals Search And Download.
SY-7VCM Quick Start Guide
Key Features
Ø
Supports Intel® processors
-FSB 66MHz: Celeron (400-700MHz)
- FSB 100MHz: Pentium® III (500E-
850MHz)
- FSB 133MHz: Pentium® III (533-
933MHz)
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Support 5 sets of voltage monitoring
Supports multiple-boot function
3 x 32-bit bus mastering PCI slots
1 x 32-bit AGP slot
Ô
Ø
Supports 66/100/133 MHz Front Side
Bus Frequency
4 x USB ports onboard
1 x IrDA port
Ø
Ø
Auto-detect CPU voltage
ATX power connector
Easy CPU settings in BIOS with the
“SOYO COMBO Setup”
Hardware Random Number Generator
(RNG) for enabling enhanced platform
security
Ø
Ø
Ø
Ø
Ø
PC99, ACPI
Ultra DMA33/66 (ATA 33/66)
Supports Wake-On-LAN (WOL)
Power-on by modem and alarm
Supports onboard hardware monitoring
Ø
RTC hardware to handle Y2K Century
Rollover
5
Download from Www.Somanuals.com. All Manuals Search And Download.
SY-7VCM Quick Start Guide
2
Installation
To avoid damage to your Motherboard, please follow these simple rules while
handling this equipment:
l
Before handling the Motherboard, ground yourself by touching on to an unpainted
portion of the system's metal chassis.
l
l
Remove the Motherboard from its anti-static packaging. Hold the motherboard by the
edges and avoid touching its components.
Check the Motherboard for damage. If any chip appears to be loose, press carefully
to seat it firmly in its socket.
Follow the directions in this section which is designed to guide you through a quick and
correct method to install your new SY-7VCM Motherboard. For detailed information, please
refer to the SY-7VCM Motherboard User's guide and Technical Reference online manual on
in the CD-ROM package that came with your Motherboard.
Gather and prepare all necessary components to complete the installation successfully:
u
u
u
u
u
u
u
u
u
u
Pentium® Socket370 processor with built-in CPU cooling fan (boxed type)
SDRAM module(s)
Computer case with adequate power supply unit
Monitor
PS/2 Keyboard
Pointing Device (PS/2 Mouse)
Speaker(s) (optional)
Disk Drives: HDD, CD-ROM, Floppy drive …
External Peripherals: Printer, Plotter, and Modem (optional)
Internal Peripherals: Modem and LAN cards (optional)
Note: 1. If you want to use an external speaker connected to "Line-out" port, please make
sure to use an "amplified speaker" that can generate proper output sound volume.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
SY-7VCM Quick Start Guide
Install the Motherboard
To perform the installation of your new SY-7VCM Motherboard, follow the steps below:
Step 1.
CPU Installation
Mark your CPU Frequency: Record the working frequency of your CPU that
should be clearly marked on the CPU cover.
FSB 66MHz
400MHz(66x6.0)
433MHz(66x6.5)
466MHz(66x7.0)
500MHz(66x7.5)
533MHz(66x8.0)
566MHz(66x8.5)
600MHz(66x9.0)
633MHz(66x9.5)
667MHz(66x10.0)
700MHz(66x10.5)
FSB 100MHz
500MHz (100 x 5.0)
550MHz (100 x 5.5)
600MHz (100 x 6.0)
650MHz (100 x 6.5)
700MHz (100 x 7.0)
750MHz (100 x7.5)
800MHz (100 x 8.0)
850MHz (100 x 8.5)
FSB 133MHz
533MHz (133 x 4.0)
600MHz (133 x 4.5)
667MHz (133 x 5.0)
733MHz (133 x 5.5)
800MHz (133 x 6.0)
866MHz (133 x 6.5)
933MHz (133 x 7.0)
CPU Mount Procedure: To mount the Pentium® & CeleronTM processor that you
have purchased separately, follow these instructions.
1
2
3
4
1. Lift the socket handle up to a vertical position.
2. Align the blunt edge of the CPU with the matching pinhole edge on the socket.
3. Seat the processor in the socket completely and without forcing.
4. Then close the socket handle to secure the CPU in place.
Remember to connect the CPU Cooling Fan to the appropriate power
connector on the Motherboard. The fan is a key component that stabilizes the
system. It prevents the equipment from overheating and prolongs the life of
your CPU.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
SY-7VCM Quick Start Guide
Step 2. Connections to the Motherboard
This section tells how to connect internal peripherals and the power supply to the Motherboard.
The internal peripherals consist of IDE devices (HDD, CD-ROM), Floppy Disk Drive, Chassis
Fan, Front Panel Devices (Internal Speaker, Reset Button and IDE LED Switch.), Wake-On-
LAN card, VGA card, Sound Card, and other devices.
For more details on connecting internal and external peripherals to your new SY-7VCM
Motherboard, please refer to SY-7VCM Motherboard User's Guide and Technical Reference
online manual on the CD-ROM.
Connectors and Plug-ins
Wake-On-LAN Header: JP10
Standard IrDA (Infrared Device Header): SIRCON
Pin1
5VSB
Pin2
GND
Pin3
MP-Wakeup
Pin1
VCC
Pin2
None
Pin3
IRRX
Pin4
GND
Pin5
IRTX
CPU Cooling Fan: CPUFAN
Chassis Fan: CHAFAN
Pin1
GND
Pin2
12V
Pin3
SENSOR
Pin1
GND
Pin2
12V
Pin3
SENSOR
USB3
USB4
Pin1
Power
Pin2
Pin3
Pin4
Pin1
Pin2
Pin3
Pin4
Pin5
Data(-)
Data(+)
GND
Power Data(-) Data(+) GND
GND
Pin1 Pin2 Pin3 Pin4
CD -IN: CDIN1 Connect to your CD-ROM audio output.
L
G
G
R
Pin1 Pin2 Pin3 Pin4
AUX-IN: AUXIN For Auxiliary Audio devices (1.0Vrms typ.)
L
G
G
R
Pin1 Pin2 Pin3 Pin4
PHON IN:
PHON
Connect to phone connector
IN
G
G
Mono
PWRBT
1
Reset
HDD LED
Power LED
+
Pin1
5V
Pin2
NC
Pin3
GND
1
_
Speaker
Pin3
+
+
_
_
Pin1
Pin2
NC
Pin4
5V
NC
Speaker out
RESET
Speaker
Power LED
HDD LED
PWRBT
Pin1
LED Anode
Pin2
Pin1
Pin2
GND
ATX Power On/Off: PWRBT
Connect your power switch to this header (momentary switch type).
Pin1
Power Good
Pin2
GND
LED Cathode Power On/Off
To turn off the system, press this switch and hold down for longer than 4 seconds.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
SY-7VCM Quick Start Guide
ATX Power Supply: ATX PW
Attach the ATX Power cable to this connector. (This motherboard requires an ATX power supply, an AT
power supply can NOT be used.)
When using the Power-On by PS/2 Keyboard function, please make sure the ATX power supply is able to
provide at least 720mA on the 5V Standby lead (5VSB) in order to meet the standard ATX specifications.
Step 3. Configure Memory
Your board comes with two DIMM sockets, providing support for up to 1GB of main memory
using unbuffered and registered DIMM modules from 8MB to 512MB. On this motherboard,
DRAM speed can be set independent from the CPU front side bus speed. Depending on the
DRAM clock speed setting in the BIOS setup, appropriate memory modules must be used.
For 66MHz DRAM speed, use PC66 memory; for 100MHz DRAM speed, use PC100
memory; for 133MHz DRAM speed, use PC133 memory.
Memory Configuration Table
Number of Memory Modules
DIMM 1
DIMM 2
RAM Type
EDO/ SDRAM/ VCM SDRAM
8/16/32/64/128/256/512 MB
Memory Module Size (MB)
CMOS Clear (JP5)
In some cases the CMOS memory may contain wrong data, follow the steps below to clear
CMOS memory.
1. Clear the CMOS memory by momentarily shorting pin 2-3 on jumper JP5. This jumper
can be easily identified by its white colored cap.
2. Then put the jumper back to 1-2 to allow writing new of data into the CMOS memory.
CMOS Clearing
Clear CMOS Data
Retain CMOS Data
Short pin 2-3 for
at least 5 seconds to
clear the CMOS
1
Short pin 1-2 to
retain new settings
JP5 Setting
2
3
1
2
3
Note: You must unplug the ATX power cable from the ATX power connector when
performing the CMOS Clear operation.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
SY-7VCM Quick Start Guide
3
Quick BIOS Setup
This Motherboard does not require any hardware jumpers to set the CPU operating
frequency. Instead, CPU settings are software configurable through the BIOS [Soyo Combo
Feature]. The [Soyo Combo Feature] menu combines the main parameters that you need
to configure your system. They are all in one menu to enable a quick setup in BIOS.
After completion of hardware installation, turn the power switch on, then press the <DEL> key while
the system diagnostic is checking to enter the Award BIOS Setup program. The CMOS SETUP
UTILITY will be displayed on screen. Then follow these steps to configure the CPU settings.
Step 1. Select [Standard CMOS Features]
Set [Date/Time] and [Floppy drive type], then set [Hard Disk Type] to “Auto”.
Step 2. Select [Load Optimized Defaults]
Select the “Load Optimized Defaults” menu and type “Y” at the prompt to load the BIOS
optimal setup.
Step 3. Select [Soyo Combo Feature]
Move the cursor to the [CPU Frequency] field to set the CPU frequency.
The following table shows all available [CPU Frequency] settings on your SY-7VCM
Motherboard . If you set this field to [Manual], you will be required to fill in the next two
consecutive fields: (1) the CPU Host/PCI Clock, and (2) the CPU Ratio.
CPU Frequency (MHz)
633MHz (66 x 9.5)
800MHz (100 x 8.0)
Manual
667MHz (66 x 10.0)
700MHz (66 x 10.5)
500MHz (100 x 5.0)
550MHz (100 x 5.5)
600MHz (100 x 6.0)
650MHz (100 x 6.5)
700MHz(100 x 7.0)
750MHz (100 x 7.5)
850MHz (100 x 8.5)
600MHz (133 x 4.5)
666MHz (133 x 5.0)
733MHz (133 x 5.5)
800MHz (133 x 6.0)
866MHz (133 x 6.5)
933MHz (133 x 7.0)
400MHz (66 x 6.0)
433MHz (66 x 6.5)
466MHz ( 66 x 7.0)
500MHz( 66 x 7.5)
533MHz ( 66 x 8.0)
566MHz ( 66 x 8.5)
600MHz ( 66 x 9.0)
Select the working frequency of your Pentium® III, CeleronÔ processor among these preset values.
Note:
Mark the checkbox that corresponds to the working frequency of your Pentium® III, CeleronÔ
processor in case the CMOS configuration should be lost.
Step 4. Select [SAVE & EXIT SETUP]
Press <Enter> to save the new configuration to the CMOS memory, and continue with the
boot sequence.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
SY-7VCM Quick Start Guide
4
The SOYO CD
The SOYO-CD will NOT autorun if you use it on an Operating System other
than Windows 9x or NT.
Your SY-7VCM Motherboard comes with a CD-ROM labeled "SOYO CD." The SOYO
CD contains (1) the user's manual file for your new Motherboard, (2) the drivers software
available for installation, and (3) a database in HTML format with information on SOYO
Motherboards and other products.
Step 1. Insert the SOYO CD into the CD-ROM drive
The SOYO CD will auto-run, and the SOYO CD Start Up Menu will be as shown.
If you use Windows NT, the SOYO-CD will not detect your motherboard type. In that case
the following dialog will pop up, please choose your motherboard and press OK. Now the
SOYO-CD Start Up Menu will be shown.
X
LI-7000
7IWB
7IWA-F
7IWA-F V1.0
6IWM/L
6IWM
7IWB V1.0
7IWM
6IWA
7IWM/L V1
OK
(SOYO CD Start Up Program Menu)
If you use Windows 95 or 98, the SOYO CD Start Up Program automatically detects
which SOYO Motherboard you own and displays the corresponding model name.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
SY-7VCM Quick Start Guide
The user's manual files included on the SOYO CD are in PDF (Postscript Document)
format. In order to read a PDF file, the appropriate Acrobat Reader software must be
installed in your system.
Note: The Start Up program automatically detects if the Acrobat Reader utility is already
present in your system, and otherwise prompts you on whether or not you want to install it.
You must install the Acrobat Reader utility to be able to read the user's manual file. Follow
the instructions on your screen during installation, then once the installation is completed,
restart your system and re-run the SOYO CD.
Step 2. Install Drivers and Utilities
Click the Install Drivers button to display the list of drivers software that can be installed
with your Motherboard. The Start Up program displays the drivers available for the
particular model of Motherboard you own. We recommend that you only install those
drivers.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
SY-7VCM Quick Start Guide
driver
VIA 4 in 1 driver package for Win 9x/NT
revision:
VIA Ac97 Codec Driver for Win 9x/NT/2000
VIA hardware monitor for (Win 95/98)
Cancel
OK
(Driver Installation Menu)
A short description of all available drivers follows:
Ø
VIA 4in1 driver package
The 4 in 1 driver package includes all drivers your motherboard needs. After selecting this
driver package, one driver will be installed automatically (the IRQ remapping utility), the
other three are installed if selected. By default all three drivers are selected. A description of
the 4 drivers follows:
¾
Bus Master PCI IDE Driver
This driver will speed up the data-transfer rate to and from the harddisk.
¾
AGP VxD Driver
This driver must be installed in order to be able to make use of the on-board AGP
Video functionality.
¾
¾
VIA Chipset Functions Registry
This driver will make the necessary changes to the Windows registry, in order to
make sure that Windows has no problems recognizing your VIA chipset.
IRQ remapping utility (This driver is installed automatically)
This utility will remap the IRQ lines to make sure that everything functions properly
under Windows.
Ø
VIA Ac97 Codec Driver for Win 95
You have to install the drivers before installing any application for the Ac97 codec.
Ø
VIA hardware monitor for (Win 95/98)
Your motherboard comes with a hardware monitoring IC. By installing this utility
Temperature, Fan speed and Voltages can be monitored. It is also possible to set alarms
when current system values exceed or fall below pre-set values.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
SY-7VCM Quick Start Guide
Select which driver you want to install and click OK, or click Cancel to abort the driver
installation and return to the main menu.
Note: Once you have selected a driver, the system will automatically exit the SOYO CD to
begin the driver installation program. When the installation is complete, most drivers
require to restart your system before they can become active.
Step 3. Check the Latest Releases
Click the 'Check the latest Releases' button to go the SOYO Website to automatically find
the latest BIOS, manual and driver releases for your motherboard. This button will only
work if your computer is connected to the internet through a network or modem
connection. Make sure to get your modem connection up before clicking this button.
(* Internet Explorer is a Microsoft Trademark)
14
Download from Www.Somanuals.com. All Manuals Search And Download.
SY-7VCM Quick Start Guide
Quick Trouble shoot tips
Video (no display) related issues
I built a new computer system using a Soyo board and nothing happens when
turning it on, no video and no beeps from the PC speaker. What is happening
and how can it be fixed?
No screen and no beeps mean that your CPU and motherboard do not work at all. It
could be that the CPU is not seated correctly or that a component on the M/B is
grounded (shorted) with the case. Also make sure to check the voltage setting
switch (110V/220V) on the back of the power supply. To isolate the problem do
the following:
1. Press and hold down on the “Ins” (insert) key while turning on the computer
until you get video. If you do not get video then,
2. Double-check jumpers setting on you motherboard and remove all add-on
cards, unplug all hard-disk and floppy-disk drive cables and see if you can hear
some beeps. If you still do not get any beeps, then try putting the motherboard on
the table (to isolate it from the case) with the CPU and speaker only, and give it one
more try.
I hear a series of beeps and I do not get anything from my monitor. What
could be wrong?
The following lists some basic beep codes and their possible meanings:
·
One long beep and 3 very short beeps - The video card is not detected by
the motherboard. Please re-seat your video card. If you are using an AGP
card, please push your AGP card down real hard. You may have to push
VERY hard without the AGP card mounting screw. Make sure not to
insert the card the other way around.
·
Continuous beeps – One or more of the memory modules is not seated
correctly in its socket.
My PCI VGA card works fine with my system, but when I put in a new AGP
card, it does not give me any video. Is my AGP slot bad?
This is a common problem with AGP video cards. The reason is that your AGP
card did not get seated into the AGP slot fully and firmly. Please push your AGP
card down into the socket real hard, it should snap twice. You may have to unscrew
15
Download from Www.Somanuals.com. All Manuals Search And Download.
SY-7VCM Quick Start Guide
the AGP card to allow the card to go further down. Do take care not to damage the
card by using too much force.
I get distorted video my AGP card right after I save my bios. Why is that?
The cause is likely that your AGP card is not running at the correct bus speed. To
fix this, please clear the CMOS via JP5 and if it still does not work, please upgrade
your motherboard bios to the latest version.
BIOS Issues
Where can I find the BIOS revision of my mainboard?
It will be displayed on the up-left corner on the screen during boot-up. It will show
as your board type followed by the revision number, such as 5EH_2CA1 (meaning
revision 2CA1 for the SY-5EH board) or 6BA+ IV_2AA2 which means SY-6BA+
IV motherboard with 2AA2 bios.
Where can I find the latest BIOS of my motherboard?
Please go to the technical support page of one of the SOYO websites (Taiwan:
www.soyo.com.tw), and look up your motherboard to find the latest BIOS
revision.
Hard disk, floppy drive, CD-ROM etc
When I boot up my new computer I got "floppy boot failure" and the LED on
the floppy stays on
Make sure the red wire of floppy ribbon cable goes to Pin1 on the floppy drive side
(don't trust the "key lock" or "notch") and use the end-connector of the cable (don't
use middle one).
Modem issues
I get an "I/O Conflict" message when I turn on my system and I can not get
my modem to work
What you need to do is to disable 'COM2' (or UART2 or serial port 2) in the bios
under integrated peripheral setup.
I have installed my modem drivers several times and I still cannot get my
modem to work. Why?
If you are sure that the modem driver has been installed correctly, then you need to
install the south bridge driver from the SOYO CD, this is because Windows does
not properly recognize relatively new chipsets.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
SY-7VCM Quick Start Guide
Audio Issues
I do not get any sound from my sound card. What could be wrong?
Please make sure the speaker is connected to the speaker out port on your sound card.
In Device Manager, I keep getting yellow exclamation signs on my sound port
even though I have installed my sound driver several times and I could not get
my sound card to work. What is wrong?
It is likely that you did not have the correct driver installed. If you are sure that the
correct sound driver has been installed, then please install the 'south bridge' driver
for the motherboard.
The sound is working in my system, but when I play CD music from the CD-
ROM, I do not get any sound. What is wrong?
This is because the 3-wire audio cable from the CD-ROM to the sound card is not
connected or it is loose.
The sound from my sound card is distorted when Windows starts. What is
wrong?
First, if you are using an ISA sound card, please make sure the IRQ needed for the
sound card is set to 'Legacy ISA' in the bios. In other words, if your ISA sound card
takes IRQ5, then set IRQ5 to 'Legacy ISA'. Next, install the 'south bridge' driver for
the motherboard.
The sound and everything else works fine except that the recorder and
microphone do not work. What is wrong?
This is because the recorder and microphone in the Windows are not enabled.
Please go to sound properties and enable them.
Lock up (freeze)
When I boot up my system, everything works fine. It sees my CPU and
memory, detects my hard drive, floppy drive and CD-ROM but locks up at
"Verify DMI pool data... ", and it won’ t go any further. What should I do?
Please clear the CMOS via JP5 then choose 'load setup default' in the bios and save
the bios and exit. Next, unplug all other add-on cards except the video card and
floppy drive controller, and see if it can boot from floppy. Then put back the
peripherals one by one to identify which one causes the lockup. If you are running a
Cyrix CPU, make sure the 'linear burst function' is enabled in the bios.
I can not get my board to run properly.
Please make sure you have the latest bios and driver from the SOYO web site at:
17
Download from Www.Somanuals.com. All Manuals Search And Download.
SY-7VCM Quick Start Guide
How to contact us:
n
If you are interested in our products, please contact the SOYO sales
department in the region you live.
n
If you require Technical Assistance, please contact our Technical Support in
the region you live.
SOYO prefers Email as communication medium, remember to always add to the
email the country that you live in.
SOYO Taiwan
SOYO USA
41484 Christy Street, Fremont, CA
94538
No. 21 Wu-Kung 5 Rd., Hsin Chuang
City, Taipei Hsien, Taiwan
Region Covered: US and Canada
Region Covered: Taiwan and Asia-
Pacific. (Including Australia).
Web Site: www.soyo.com.tw
Sales:
Sales:
Email : [email protected]
Tel: 886-2-22903300-318
Fax: 886-2-22983322
E-mail: [email protected]
Technical Support:
Support Web Site:
Technical Support:
Fax: 886-2-22983322
E-mail: [email protected]
SOYO (U.K.) LTD.
Unit 7, Alice Way, Hounslow Business
Park,
SOYO Europe BV
Hanworth Road, Hounslow, TW3 3UD
Signaalrood 19, 2718 SH Zoetermeer
The Netherlands
Region Covered: United Kingdom and
Republic of Ireland
Region Covered: Europe except
Germany and United Kingdom
Web Site: www.soyo.co.uk
Sales:
Tel : +44 (0)181 569 4111
Fax: +44 (0)181 569 4134
E-mail: [email protected]
europe.com
Sales:
Tel: +31-69-3637500
Fax: +31-79-3637575
Email: [email protected]
Technical Support:
Tel : +44 (0)181 569 4111
Fax: +44 (0)181 569 4134
E-Mail: [email protected]
Technical Support:
Tel : +31-79-3637500
Fax: +31-79-3637575
Email: [email protected]
18
Download from Www.Somanuals.com. All Manuals Search And Download.
SY-7VCM Quick Start Guide
SOYO Deutschland GmbH
SOYO Hong Kong
August-Wilhelm-Kuhnholz-Str. 15
D-26135 Oldenburg
Region Covered: Hong Kong
Web Site: www.soyo.com.hk
Sales:
Region Covered: Germany
tel: 852-27109810
fax: 852-27109078
E-mail: [email protected]
Vertrieb Mainboards, Notebooks und
SoyoCom Produkte:
Technical Support:
tel: 852-27109810
fax: 852-27109078
E-mail: [email protected]
E-Mail: [email protected]
Fon: +49-(0)441/20910-31/33
Fax: +49-(0)441/203422
Technischer Support:
SOYO China (Gin Mei Jei)
E-Mail: [email protected]
Fon: +49-(0)441/20910-40
Fax: +49-(0)441/203422
Region Covered: All of China
Sales:
Tel: 86-10-62510089
fax: 86-10-62510388
E-mail: [email protected]
SOYO KOREA
Region Covered: Korea
Sales:
Technical Support:
Tel : 82-2-716-2850
Fax : 82-2-704-2619
E-mail : [email protected]
Tel: 86-10-62510089
fax: 86-10-62510388
E-mail: [email protected]
Technical Support:
SOYO Japan
tel : 82-2-717-4392
fax : 82-2-712-5853
e-mail : [email protected]
Region Covered: Japan
Web site: www.soyo.co.jp
Sales:
Tel: 81-3-33682188
Fax: 81-3-33682199
E-mail: [email protected]
Technical Support:
Tel: 81-3-33682188
Fax: 81-3-33682199
E-mail: [email protected]
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Edition: June 2000
Version 1.2
SY-7VCM
SERIAL
Download from Www.Somanuals.com. All Manuals Search And Download.
|