CordlessRechargeableLED
FoldingLight
QuickReferenceGuide
Introduction
SIIG's Cordless Rechargeable LED Folding Light features tri-
folddesignandrechargeablebatteryforportabilityandease
of use. It integrates 18 LEDs with adjustable light output,
multi-functionclock/alarm/temperaturedisplay,battery
charge/power status LED and is wall mountable. This
portable cordless rechargeable LED light is the prefect
solution for your on-the-go or at home lighting needs.
Package Contents
•
•
•
•
•
Cordless Rechargeable LED Folding Light
Mini USB charging cable
Wallmountbracket
Carrying pouch
Quickreferenceguide
1
04-0918A
Download from Www.Somanuals.com. All Manuals Search And Download.
4.
Time/Temperature Display
Displaysthetime,day,dateandtemperature.Youcan
also set the alarm here.
Mode
Time
Date
Day
Temperature
Figure 3
5.
6.
7.
8.
DisplaySettingsButtons
Press the buttons to change the alarm or time/date/
day setting.
CR2025 Battery Compartment
Powers the Time/Temperature display via CR2025
battery.
MiniUSBChargingPort
Connect to USB power source to charge the internal
rechargeablebattery
ChargingStatusLED
The indicator of the charging status
Mini USB
Charging
charging port
status LED
Figure 4
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Instructions for Use
1.
WhenusingtheLEDLight,holdthebasestandbyone
hand,andpulltheupperlightarmupwardbyanother
hand to unfold it.
Pull up or press down the
upper light arm
hold the base
stand
Figure 5
2.
PlugtheMiniUSBtipofincludedMiniUSBcharging
cable into the LED Light's Mini USB Charging Port,
then plug the other end of the Mini USB charging
cableintoeitheraUSBportofyourcomputeroraUSB
wall charger.
The Charge Status LED will turn red to indicate the
charging process has begun.
External
power source
USB
Mini
USB
Figure 6
4
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTE:PleaseusetheincludedMiniUSBcharging
cabletochargetheLEDLight.UsingadifferentUSB
cable is not recommended.
3.
4.
WaitfortheChargingStatusLEDgoesoff,thecharging
processiscomplete.
NOTE: Please make sure the LED Folding Light is
fullychargedbeforeuse.
Before initial use, please remove the CR2025 Battery
protectiontabtopowerontheTimeandTemperature
Display.
Pull out the protection tab
before initial use
Figure 7
5.
Forfuturebatteryreplacement,rotatethebatterycover
clockwiseusingacoinorothersimilarshapedobject
to remove it. Insert a new CR2025 with the positive
side facing up, then reinstall the battery cover by
turning it counter clockwise.
CR2025 battery
rotate clockwise to
open the cover
Figure 8
5
Download from Www.Somanuals.com. All Manuals Search And Download.
6.
Pulluporpressdowntheupperlightarmtothebest
angle to fit your needs.
NOTE: There'sasensoronthebackofthebasestand
(See Figure 9a). If the unit is fully folded, the LED
lights turn off automatically (See Figure 9b).
When fully folded, the LEDs
go off automatically
sensor
Figure 9a
Figure 9b
LEDLightAdjustment
UsetheOne-TouchDimmerSwitchtoadjustthebrightness
as needed.
Touch one time To turn on or turn off the LED light
Touch and hold To turn down or turn up the brightness
NOTE: The LED light output will gradually dim
during use. Please recharge the LED Light at this
time.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Time/DateSettings
Press the Display Settings Buttons on the rear side of the
change the Time/Date settings.
Press the button to switch between "time display
mode" or "alarm mode".
MODE * In time display mode, it shows TIME on the
display; in alarm mode, a clock symbol appears
instead.
Press SET button and the section you are going
to change will start blinking. To change the
settings, press UP/DOWN buttons; to keep it the
same, just press SET button again, and you'll
proceed editing the next section.
When the setup is complete, press the SET
SET
button again to save the change.
NOTE: The "Day" information will change
automatically. No need to adjust it manually.
Press the SET then UP button to set your
Time/Date backward.
UP
Press the SET then DOWN button to set your
Time/Date backward.
DOWN
7
Download from Www.Somanuals.com. All Manuals Search And Download.
AlarmSettings
1.
Press the MODE button to change to Alarm mode.
2.
Press the SET and UP/DOWN button to set your
alarm time, alarm internal in snooze mode, and ring
tone in order.
NOTE:SnoozemodeissupportedbytheLEDLight;
thealarmwillringfor1minuteonregularinterval.
3.
Press the SET button again to save the settings.
OtherDisplaySettings
1.
2.
3.
PresstheUPbuttontoselectbetween12-hourand24-
hour time display.
PresstheDOWNbuttontoselectbetweenFahrenheit
and Celsius temperature display.
Press the Alarm button to turn off the alarm.
Application
•
WallMount
Pealofftheprotectivecoverfromtheadhesivetapeon
the back of the Wall mount bracket, then press and
hold the Wall mount bracket to the wall for 5-10
seconds. IMPORTANT: The hook opening should
faceup.
hook opening face
up
Figure 10
8
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTE: For best adhesion, make sure to clean the
wallsurfacebeforeattachingthebrackettothewall.
Place the LED Folding Light vertically. Make sure the
Mini USB Charging Port is facing up.
LineupthetwoMountingHolesontheLEDLightto
thehooksoftheWallmountbracket,theninsertit.See
Figure 11a.
PulldowntheLEDLight firmly,butgently,makesure
theLEDLightishookedontotheWallmountbracket.
See Figure 11b.
Mini USB
Charging Port
Figure 11a
Figure 11b
9
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
Desktop
Unfold and place on the desktop. See Figure 12a.
Fullyfolded
Fully fold and carry anywhere. See Figure 12b.
Figure 12a
Figure 12b
10
Download from Www.Somanuals.com. All Manuals Search And Download.
TechnicalSupportandWarranty
QUESTIONS? SIIG’s Online Support has answers! Simply visit our web site at
new drivers and solutions. Answers to your questions could be just a few clicks
away. You can also submit questions online and a technical support analyst will
promptlyrespond.
SIIG offers a 2-year manufacturer warranty with this product. This warranty
coverstheoriginalpurchaserandguaranteestheproducttobefreeofanydefectsin
materialsorworkmanshipfortwo(2)yearsfromthedateofpurchaseoftheproduct.
SIIG will, at our discretion, repair or replace (with an identical product or product
having similar features and functionality) the product if defective in materials or
workmanship. Thiswarrantygivesyouspecificlegalrights,andyoumayalsohave
other rights which vary from state to state. Please see our web site for more
warranty details.
If you encounter any problems with this product, please follow the procedures
below.
A)Ifitiswithinthestore'sreturnpolicyperiod,pleasereturntheproducttothestore
whereyoupurchasedfrom.
B)Ifyourpurchasehaspassedthestore'sreturnpolicyperiod,pleasefollowthesteps
belowtohavetheproductrepairedorreplaced.
Step 1: Submit your RMA request.
to submit a request to SIIG RMA or fax a request to 510-657-5962. Your RMA
requestwillbeprocessed, iftheproductisdeterminedtobedefective, anRMA
numberwill be issued.
Step 2: After obtaining an RMA number, ship the product.
•
Properlypacktheproductforshipping. Allaccessoriesthatcamewiththe
originalpackagemustbeincluded.
•
Clearly write your RMA number on the top of the returned package. SIIG
willrefuseto acceptanyshippingpackage, and willnotberesponsiblefor
a product returned without an RMA number posted on the outside of the
shippingcarton.
•
•
YouareresponsibleforthecostofshippingtoSIIG. Shiptheproducttothe
followingaddress:
SIIG,Inc.
6078 Stewart Avenue
Fremont, CA 94538-3152, USA
RMA#:
SIIG will ship the repaired or replaced product via Ground in the U.S. and
International Economy outside of the U.S. at no cost to the customer.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
About SIIG, Inc.
Founded in 1985, SIIG, Inc. is a leading manufacturer of IT connectivity
solutions (including Serial ATA and Ultra ATA Controllers, FireWire, USB,
and legacy I/O adapters) that bridge the connection between Desktop/
Notebook systems and external peripherals. SIIG continues to grow by
adding A/V and Digital Signage connectivity solutions to our extensive
portfolio.
SIIG products offer comprehensive user manuals, many user-friendly
features, and are backed by an extensive manufacturer warranty. High
quality control standards are evident by the overall ease of installation and
compatibility of our products, as well as one of the lowest defective return
rates in the industry. SIIG products can be found in computer retail stores,
mail order catalogs, through major distributors, system integrators, and
VARs in the Americas and the UK, and through e-commerce sites.
PRODUCT NAME
Cordless Rechargeable LED Folding Light
FCC RULES: TESTED TO COMPLY WITH FCC PART 15, CLASS B
OPERATING ENVIRONMENT: FOR HOME OR OFFICE USE
FCC COMPLIANCE STATEMENT:
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
THE PARTY RESPONSIBLE FOR PRODUCT COMPLIANCE
SIIG, Inc.
6078 Stewart Avenue
Fremont, CA 94538-3152, USA
Phone: 510-657-8688
Cordless Rechargeable LED Folding Light is a trademark of SIIG, Inc. SIIG and
theSIIGlogoareregisteredtrademarksofSIIG,Inc. MicrosoftandWindowsare
registered trademarks of Microsoft Corporation. All other names used in this
publicationareforidentificationonlyandmaybetrademarksoftheirrespective
owners.
October, 2013
Copyright © 2013 by SIIG, Inc. All rights reserved.
Download from Www.Somanuals.com. All Manuals Search And Download.
|