SIIG TV Mount 04 0660A User Manual

Low Profile Universal TV Mount - 23" to 42"  
Installation Instructions  
Fixed Flat-Panel TV Wall Mount  
Material: 2.0mm Cold Rolled Steel Plate  
TV Size: 23" - 42"  
Max load capacity: 132lbs / 60kgs  
Wall distance: 1.38" / 35mm  
Bubble level included  
Universal Mounting Pattern  
IMPORTANT: If you don't understand the installation instructions, please consult an installation  
specialist  
04-0660A  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
Tools Required:  
Phillips head screw driver  
1
2
3
Stud finder for drywall installation  
7/16" Socket and Wrench  
Electric drill, 1/8" (3mm) drill bit for wood stud installation and 5/16" (8mm) masonry bit for concrete/brick installation  
4
Note: Please ensure that the bubble level (G2) is properly mounted on the wall plate prior to mounting the wall  
plate.  
Step1: Wall Plate Installation  
A) Wood Stud Installation  
NOTE: When mounting to wood studs, the two wood studs must be a minimum of 16" apart.  
1
2
Use a high-quality electronic stud finder to locate dead center of two  
studs and mark their locations with a pencil (figure 1-a).  
Attach the bubble level (G2) to the wall plate and with the help of an  
assistant ensure the wall plate is level, position the wall plate against  
the wall in the desired mounting location.  
3
Mark the right (upper and lower) and the left (upper and lower) positions of the small horizontal slots that are in  
alignment with the studs. You should mark four positions total.  
4
5
Next, pre-drill a 1/8" hole to a depth of approximately 2" in the wood stud at each marked location.  
Place the wall plate against the wall and line up the mounting slots with the drilled holes. Check the bubble level to  
verify that the wall plate is level.  
6
7
For each location, insert a bolt (E) and washer (G1) into the wall.  
Tighten the bolt with a 7/16" socket or open ended wrench by turning clockwise until tight.  
CAUTION: Do not over-tighten bolts-doing so many cause unnecessary damage to the wall. Avoid excessive torque.  
CAUTION: Do not release the wall plate until it is properly mounted and secured to the wall.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
B) Concrete / Brick Installation  
The concrete anchors must be used for concrete installation.  
NOTE:  
1
Attach the bubble level (G2) to the wall plate, with the help of an assistant place the wall plate into position against the  
wall, using the bubble level to keep it level.  
2
3
4
Mark four holes to be used for securing the mount and place the wall plate aside.  
Next, drill holes using an electric drill and 5/16" masonry bit to a depth of approximately 2".  
Insert a concrete anchor (F) into each hole. If necessary, a hammer can be used to lightly tap each anchor into place  
so that they are flush with the wall.  
5
Once all of the anchors are in place, move the wall plate back into position. Check the bubble level to verify that the  
wall plate is level.  
6
7
Insert bolt (E) with washer (G1) into each concrete anchor in the wall. Do not tighten until all bolts are in place.  
Tighten the bolt with a 7/16" socket or open ended wrench by turning clockwise until tight.  
Step 2 Display Bracket Installation  
1
2
To ensure optimal installation, this kit includes various screws of  
different diameters and lengths.  
Place your TV screen down on a soft, flat surface, and locate the  
threaded mounting points that are located on the back of the display.  
3
4
5
Determine which screw (A1/A2/B1/B2/C1/C2) is the correct length by  
carefully inserting a straw, or toothpick, and mark how deep the  
mounting point is.  
According to the size of display's hole, choose the corresponding  
screw and hole on the rectangle washer, then thread them in line as  
shown.  
If your display has a curved back or a recessed thread mounting  
point, place a spacer (H) between the mounting bracket and display.  
Then choose a screw (A2/B2/C2) to match.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Step 3 Final Installation & Adjustment  
1
2
Hook the TV rails over the top of the wall plate.  
Then rotate the long screw at the bottom of the display rail to tighten.  
Maintenance  
Check the mounting screws every two months for tightness.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Blank Page  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Technical Support and Warranty  
QUESTIONS? SIIG’s Online Support has answers! Simply visit our web site at www.siig.com and click Support. Our online  
support database is updated daily with new drivers and solutions. Answers to your questions could be just a few clicks away. You  
can also submit questions online and a technical support analysts will promptly respond.  
SIIG offers a 5-year manufacturer warranty with this product. This warranty covers the original purchaser and guarantees the  
product to be free of any defects in materials or workmanship for five (5) years from the date of purchase of the product.  
SIIG will, at our discretion, repair or replace (with an identical product or product having similar features and functionality) the  
product if defective in materials or workmanship. This warranty gives you specific legal rights, and you may also have other rights  
which vary from state to state. Please see our web site for more warranty details.  
If you encounter any problems with this product, please follow the procedures below.  
A) If it is within the store's return policy period, please return the product to the store where you purchased from.  
B) If your purchase has passed the store's return policy period, please follow these steps to have the product repaired or replaced.  
Step 1: Submit your RMA request.  
product is determined to be defective, an RMA number will be issued.  
Step 2: After obtaining an RMA number, ship the product.  
• Properly pack the product for shipping. All software, cable(s) and any other accessories that came with the original package must  
be included.  
• Clearly write your RMA number on the top of the returned package. SIIG will refuse to accept any shipping package, and will not  
be responsible for a product returned without an RMA number posted on the outside of the shipping carton.  
• You are responsible for the cost of shipping to SIIG. Ship the product to the following address:  
SIIG, Inc.  
6078 Stewart Avenue  
Fremont, CA 94538-3152, USA  
RMA #: ________________  
• SIIG will ship the repaired or replaced product via Ground in the U.S. and International Economy outside of the U.S. at no cost to  
the customer.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
About SIIG, Inc.  
Founded in 1985, SIIG, Inc. is a leading manufacturer of IT connectivity solutions (including Serial ATA and Ultra ATA  
Controllers, FireWire, USB, and legacy I/O adapters) that bridge the connection between Desktop/Notebook systems and  
external peripherals. SIIG continues to grow by adding A/V and Digital Signage connectivity solutions to our extensive  
portfolio. All centered around the distribution and switching of A/V signals over CAT5/6, these products include matrix  
switches, distribution amplifiers, extenders, converters, splitters, cabling, and more.  
SIIG is the premier one-stop source of upgrades and is committed to providing high quality products while keeping  
economical and competitive prices. High-quality control standards are evident by one of the lowest defective return rates  
in the industry. Our products offer comprehensive user manuals, user-friendly features, and most products are backed  
by a lifetime warranty.  
SIIG products can be found in many computer retail stores, mail order catalogs, and e-commerce sites in the Americas,  
as well as through major distributors, system integrators, and VARs.  
PRODUCT NAME  
Low Profile Universal TV Mount - 23" to 42"  
Low Profile Universal TV Mount - 23" to 42" is a trademark of SIIG, Inc. SIIG and the SIIG logo are registered trademarks of SIIG, Inc. Other names  
used in this publication are for identification only and may be trademarks of their respective owners.  
January, 2011  
Copyright © 2011 by SIIG, Inc. All rights reserved.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  

Sharp Computer Monitor LL 191A User Manual
Sharp CRT Television 32C231 User Manual
Sony Camcorder A390 User Manual
Sony Satellite Radio STR DN1030 User Manual
Sony Speaker RDH SK8iP User Manual
Southern Pride Smoker SPK 700 SL User Manual
Star Trac Elliptical Trainer E TBTe User Manual
Stoelting Freezer E157 User Manual
Sylvania Flat Panel Television LC200SL9 User Manual
Symphonic VCR VR 69WF User Manual