4x2 HDMI Matrix Switch
with 3DTV Support
Quick Installation Guide
Introduction
The 4x2 HDMI Matrix Switch with 3DTV Support
allows any four HDMI sources to be displayed on
any two displays and routes high definition video
in multiple resolutions up to 1080p plus multi-
channel audio.
Key Features and Benefits
•
•
•
HDMI and HDCP compliant
Support 1080p with 3DTV support
Support standard, DSD and HD (HBR)
audio
Package Contents
•
4x2 HDMI Matrix Switch with 3DTV
support
•
•
•
Power adapter
IR remote control & 4 rubber pads
Quick installation guide
04-0755A
1
Download from Www.Somanuals.com. All Manuals Search And Download.
S/PDIF Out
HDMI In 4
HDMI In 3
HDMI In 2
HDMI In
HDMI Out 2
USB port
HDMI Out 1
Power jack
Figure 2 Rear Panel Layout
•
•
USB port: For firmware update only
Power jack: Connects to the included power
adapter
•
•
•
HDMI Output (1-2): Connects to your
HDMI displays via HDMI cables (cables not
included)
HDMI Input (1-4): Connects to your HDMI
source's HDMI output via HDMI cables
(cables not included)
S/PDIF out: Extracts audio signal from
HDMI output 1
3
Download from Www.Somanuals.com. All Manuals Search And Download.
IRRemoteControl
Output 1 select
Output 2 select
Power
Figure 3: IR Remote Control
•
•
•
Output 1 select: Select HDMI input 1, 2, 3 or
4 for Output 1
Output 2 select: Select HDMI input 1, 2, 3 or
4 for Output 2
Power: Press the button to power on/off
the switch
Do4wnload from Www.Somanuals.com. All Manuals Search And Download.
HardwareInstallation
1.
2.
Power off all source devices and displays.
Connect up to 4 HDMI source devices to the
switch's HDMI input ports using HDMI
cables (cables not included).
3.
Connect up to 2 HDMI displays to the
switch's HDMI output ports using HDMI
cables (cables not included).
4.
5.
6.
Plug the power adapter into the switch's
Power jack.
Plug the power adapter into a reliable power
outlet.
Power on the switch and ensure the switch's
power LED is lit.
7.
8.
Poweronalldevicesconnectedtotheswitch.
The switch is now ready for use.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Use the front panel push buttons or the IR Remote
Control to select the sources and displays.
Front Panel Push Button Selection
See descriptions and instructions on page 2.
IR Remote Control Selection
See descriptions and instructions on page 2.
Do6wnload from Www.Somanuals.com. All Manuals Search And Download.
TechnicalSupportandWarranty
QUESTIONS? SIIG’s Online Support has answers! Simply visit our web site at
new drivers and solutions. Answers to your questions could be just a few clicks away.
You can also submit questions online and a technical support analyst will promptly
respond.
SIIG offers a 3-year manufacturer warranty with this product. This warranty covers the
original purchaser and guarantees the product to be free of any defects in materials or
workmanship for three (3) years from the date of purchase of the product.
SIIG will, at our discretion, repair or replace (with an identical product or product
having similar features and functionality) the product if defective in materials or
workmanship. This warranty gives you specific legal rights, and you may also have other
rights which vary from state to state. Please see our web site for more warranty details.
If you encounter any problems with this product, please follow the procedures below.
A) If it is within the store's return policy period, please return the product to the store
where you purchased from.
B) If your purchase has passed the store's return policy period, please follow the steps
below to have the product repaired or replaced.
Step 1: Submit your RMA request.
to submit a request to SIIG RMA or fax a request to 510-657-5962. Your RMA request
will be processed, if the product is determined to be defective, an RMA number will
be issued.
Step 2: After obtaining an RMA number, ship the product.
•
Properly pack the product for shipping. All accessories that came with the
original package must be included.
•
Clearly write your RMA number on the top of the returned package. SIIG will
refuse to accept any shipping package, and will not be responsible for a product
returned without an RMA number posted on the outside of the shipping
carton.
•
•
You are responsible for the cost of shipping to SIIG. Ship the product to the
followingaddress:
SIIG, Inc.
6078 Stewart Avenue
Fremont, CA 94538-3152, USA
RMA #:
SIIG will ship the repaired or replaced product via Ground in the U.S. and
International Economy outside of the U.S. at no cost to the customer.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
About SIIG, Inc.
Founded in 1985, SIIG, Inc. is a leading manufacturer of IT connectivity
solutions (including Serial ATA and Ultra ATA Controllers, FireWire, USB,
and legacy I/O adapters) that bridge the connection between Desktop/
Notebooksystemsandexternalperipherals. SIIGcontinuestogrowbyadding
A/V and Digital Signage connectivity solutions to our extensive portfolio.
SIIGproductsoffercomprehensiveusermanuals,manyuser-friendlyfeatures,
andarebackedbyanextensivemanufacturerwarranty. Highqualitycontrol
standards are evident by the overall ease of installation and compatibility of
ourproducts,aswellasoneofthelowestdefectivereturnratesintheindustry.
SIIG products can be found in computer retail stores, mail order catalogs,
throughmajordistributors,systemintegrators,andVARsintheAmericasand
theUK,andthroughe-commercesites.
PRODUCT NAME
4 x 2 HDMI Matrix Switch with 3DTV Support
FCC RULES: TESTED TO COMPLY WITH FCC PART 15, CLASS B
OPERATING ENVIRONMENT: FOR HOME OR OFFICE USE
FCCCOMPLIANCESTATEMENT:
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
THE PARTY RESPONSIBLE FOR PRODUCT COMPLIANCE
SIIG, Inc.
6078 Stewart Avenue
Fremont, CA 94538-3152, USA
Phone: 510-657-8688
4 x 2 HDMI Matrix Switch with 3DTV Support is a trademark of SIIG, Inc. SIIG and the SIIG
logo are registered trademarks of SIIG, Inc. All other names used in this publication are for
identification only and may be trademarks of their respective owners.
January, 2012
Copyright © 2012 by SIIG, Inc. All rights reserved.
Download from Www.Somanuals.com. All Manuals Search And Download.
|