SIIG Computer Drive 04 0790A User Manual

SuperSpeedUSB3.0to  
SATA 2.5" Tool-less  
Enclosure  
Quick Installation Guide  
Introduction  
The SuperSpeed USB 3.0 to SATA 2.5" Tool-less  
Enclosure is designed to work USB equipped  
computers.Thisenclosureprovideslargecapacity  
mobile storage using 2.5" SATA hard disk drives  
through hot-swapping SuperSpeed USB 3.0  
interface.  
Key Features and Benefits  
Quickly adds more storage space to your  
USB-enabled PC (USB 3.0 recommended)  
Supports USB 3.0 data transfer rate up to  
5Gb/s  
Tool-less design and no driver installation  
required  
Supports up to 3TB hard disk capacity  
04-0790A  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
Layout  
Top cover  
USB 3.0 micro-B connector  
Bottom cover  
Power/Activity LED  
Slider to release the cases  
Figure 1: Back Panel Layout  
USB 3.0 Y-split Cable  
Figure 2: USB 3.0 Y-split Cable Connectors  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
Power and Activity LED  
The LED indicator illuminates solid blue when  
the enclosure is connected and powered up. The  
LED flashes during data transfer. Do not  
disconnect the enclosure while the LED is flashing  
HardwareInstallation  
The following section guides you through the  
installation of your drive kit.  
Installing a 2.5" Hard Disk Drive  
1.  
Slide the slider to the right to release the top  
cover (see Figure 3). Slide the top cover out  
of the enclosure (See Figure 4).  
Figure 3  
Figure 4  
Do4wnload from Www.Somanuals.com. All Manuals Search And Download.  
2.  
Open the inner top case, slide in the SATA  
HDD and connect it to the PCBA SATA  
connector (see Figure 5 and Figure 6).  
Figure 5  
Figure 6  
Note: This enclosure supports 12.5mm  
height hard drives. For a 9.5mm drive,  
attach the included sponge(s) to the inner  
top case to fill the gap and secure the drive  
from moving (see Figure 6).  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
3.  
Close the inner top case and slide the top  
coverbacktotheoriginalposition(seeFigure  
7 and Figure 8).  
Figure 7  
Figure 8  
4.  
5.  
Plug the included USB 3.0 cable to the  
enclosure via the micro-B connector (see  
Figure 2).  
Plug the Type-A data (blue) connector (see  
Figure 2) to the computer’s USB port.  
Do6wnload from Www.Somanuals.com. All Manuals Search And Download.  
Important: In most cases the Type-A data  
(blue) connector will supply enough  
power to the enclosure. If not, use the  
optional Type-A power (white) connector  
to supply more power. Before proceeding,  
first unplug the Type-A data (blue)  
connector, then plug the Type-A power  
(white) connector to an available USB  
port, then re-plug the Type-A data (blue)  
connector.  
6.  
The SuperSpeed USB 3.0 to SATA 2.5" Tool-  
less Enclosure will turn on automatically.  
Make sure that the LED is lit. Go to Driver  
Installation to complete the installation.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
DriverInstallation  
Windows will automatically detect and install  
drivers for the SuperSpeed USB 3.0 to SATA 2.5"  
Tool-less Enclosure. No additional driver  
installation is needed.  
Using the SuperSpeed USB 3.0 to SATA  
2.5" Tool-less Enclosure  
An additional drive icon will appear in My  
Computer when the enclosure is plugged into a  
USB port. The drive acts just like a conventional  
hard drive in your system.  
Disconnecting from the Computer  
Before unplugging the SuperSpeed USB 3.0 to  
SATA 2.5" Tool-less Enclosure from the computer,  
follow the steps below for your version of  
Windows. The same rule applies when turning  
off the Enclosure. Not following the instructions  
may result in data corruption or damage to the hard  
disk drive.  
Do8wnload from Www.Somanuals.com. All Manuals Search And Download.  
Windows 7  
1.  
Click Show hidden icons; click the Safely  
Remove Hardware and Eject Media icon  
located in the system tray by the system  
clock.  
2.  
3.  
Click Eject USB Mass Storage Device.  
You can now unplug or turn off the  
SuperSpeed USB 3.0 to SATA 2.5" Tool-less  
Enclosure.  
Windows Vista / Server 2008  
1.  
Click the Safely Remove Hardware icon  
located in the system tray by the system  
clock.  
2.  
3.  
Click Safely remove USB Mass Strorage  
Device, then click OK.  
You can now unplug or turn off the  
SuperSpeed USB 3.0 to SATA 2.5" Tool-less  
Enclosure.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Windows XP / Server 2003  
1.  
Double click the Safely Remove Hardware  
icon located in the system tray by the system  
clock.  
2.  
3.  
Highlight Mass Storage Device, click Stop,  
OK, OK, and then Close.  
You can now unplug or turn off the  
SuperSpeed USB 3.0 to SATA 2.5" Tool-less  
Enclosure.  
Do10wnload from Www.Somanuals.com. All Manuals Search And Download.  
TechnicalSupportandWarranty  
QUESTIONS? SIIGs Online Support has answers! Simply visit our web site at  
www.siig.com and click Support. Our online support database is updated daily with  
new drivers and solutions. Answers to your questions could be just a few clicks away. You  
can also submit questions online and a technical support analyst will promptly respond.  
SIIG offers a 5-year manufacturer warranty with this product. This warranty covers the  
original purchaser and guarantees the product to be free of any defects in materials or  
workmanship for five (5) years from the date of purchase of the product.  
SIIG will, at our discretion, repair or replace (with an identical product or product having  
similar features and functionality) the product if defective in materials or workmanship.  
This warranty gives you specific legal rights, and you may also have other rights which  
vary from state to state. Please see our web site for more warranty details.  
If you encounter any problems with this product, please follow the procedures below.  
A) If it is within the store's return policy period, please return the product to the store  
where you purchased from.  
B) If your purchase has passed the store's return policy period, please follow the steps  
below to have the product repaired or replaced.  
Step 1: Submit your RMA request.  
Go to www.siig.com, click Support, then RMA to submit a request to SIIG RMA or  
fax a request to 510-657-5962. Your RMA request will be processed, if the product  
is determined to be defective, an RMA number will be issued.  
Step 2: After obtaining an RMA number, ship the product.  
Properly pack the product for shipping. All accessories that came with the  
original package must be included.  
Clearly write your RMA number on the top of the returned package. SIIG will  
refuse to accept any shipping package, and will not be responsible for a product  
returned without an RMA number posted on the outside of the shipping  
carton.  
You are responsible for the cost of shipping to SIIG. Ship the product to the  
followingaddress:  
SIIG, Inc.  
6078 Stewart Avenue  
Fremont, CA 94538-3152, USA  
RMA #: ___________________  
SIIG will ship the repaired or replaced product via Ground in the U.S. and  
International Economy outside of the U.S. at no cost to the customer.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
About SIIG, Inc.  
Founded in 1985, SIIG, Inc. is a leading manufacturer of IT connectivity  
solutions (including Serial ATA and Ultra ATA Controllers, FireWire, USB,  
and legacy I/O adapters) that bridge the connection between Desktop/  
Notebooksystemsandexternalperipherals. SIIGcontinuestogrowbyadding  
A/V and Digital Signage connectivity solutions to our extensive portfolio.  
SIIGproductsoffercomprehensiveusermanuals,manyuser-friendlyfeatures,  
andarebackedbyanextensivemanufacturerwarranty. Highqualitycontrol  
standards are evident by the overall ease of installation and compatibility of  
ourproducts,aswellasoneofthelowestdefectivereturnratesintheindustry.  
SIIG products can be found in computer retail stores, mail order catalogs,  
throughmajordistributors,systemintegrators,andVARsintheAmericasand  
theUK,andthroughe-commercesites.  
PRODUCT NAME  
SuperSpeed USB 3.0 to SATA 2.5" Tool-less Enclosure  
FCC RULES: TESTED TO COMPLY WITH FCC PART 15, CLASS B  
OPERATING ENVIRONMENT: FOR HOME OR OFFICE USE  
FCCCOMPLIANCESTATEMENT:  
This device complies with part 15 of the FCC Rules. Operation is subject  
to the following two conditions: (1) This device may not cause harmful  
interference, and (2) this device must accept any interference received,  
including interference that may cause undesired operation.  
THE PARTY RESPONSIBLE FOR PRODUCT COMPLIANCE  
SIIG, Inc.  
6078 Stewart Avenue  
Fremont, CA 94538-3152, USA  
Phone: 510-657-8688  
SuperSpeed USB 3.0 to SATA 2.5" Tool-less Enclosure is a trademark of SIIG, Inc. SIIG and  
the SIIG logo are registered trademarks of SIIG, Inc. All other names used in this publication  
are for identification only and may be trademarks of their respective owners.  
March, 2012  
Copyright © 2011 by SIIG, Inc. All rights reserved  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Servis Rhino Compact Loader 4211B User Manual
Soleus Air Air Conditioner KFHHP 22 ID User Manual
Sony Personal Computer PCV RX590G User Manual
Sony Portable Speaker SS FCR455H User Manual
Sony Stereo System ZS D7 User Manual
Sony Universal Remote RM AX5000 User Manual
Stanton Turntable DJ For Life User Manual
Sunrise Medical Bicycle Shark S User Manual
SUPER MICRO Computer Server 2042G 6RF User Manual
Symphonic VCR SF225B User Manual