cordless TV listening system
Set 830 S
Instruction manual
Download from Www.Somanuals.com. All Manuals Search And Download.
II
D
8
C
9
B
0
A
H
G
F
E
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Contents
Safety instructions ................................................................. 2
Delivery includes ..................................................................... 4
Product overview .................................................................... 5
Putting the Set 830 S into operation ................................. 6
Setting up the transmitter ............................................... 6
Attaching the receiver to clothing ................................ 11
for hearing aids to the receiver ..................................... 12
Using the Set 830 S .............................................................. 13
Switching the receiver on/off ........................................ 14
Adjusting the volume ...................................................... 14
Searching for a sound source ......................................... 15
Adjusting the balance ..................................................... 15
...you hear acoustic signals or warning signals? ........ 21
Cleaning the transmitter and the receiver .................. 23
If a problem occurs ... ........................................................... 23
Additional technical information ...................................... 26
Accessories and spare parts ............................................... 29
Specifications ........................................................................ 31
Manufacturer Declarations ................................................. 33
Index ........................................................................................ 34
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety instructions
Safety instructions
• Please read this instruction manual carefully and completely before
using the devices.
• Make this instruction manual easily accessible to all users at all
times. Always include this instruction manual when passing the
devices on to third parties.
• Do not use the devices in situations which require special attention
(e.g. when performing skilled jobs).
• Always keep the devices dry and do not expose them to extreme
temperatures.
• Use the devices with care and set them up in a clean, dust-free
environment.
• Varnish or furniture polish may degrade the feet of the transmitter,
which could stain your furniture. You should therefore place the
transmitter on a non-slip pad to avoid potential staining of furni-
ture.
• This receiver allows you to set higher volumes than conventional
headphones. This can cause hearing damage in persons with healthy
hearing and especially in children.
• Refer all servicing to qualified service personnel. Servicing is
required if the devices have been damaged in any way, such as
mains cable or plug damage, liquid has been spilled, objects have
fallen inside, the devices have been exposed to rain or moisture, do
not operate properly or have been dropped.
• WARNING: To reduce the risk of fire or electric shock, do not expose
the device and the mains unit to rain or moisture.
• Use only the supplied mains unit.
• Disconnect the mains connector from the wall socket
– to completely disconnect the device from the mains,
– during lightning storms or when unused for long periods of time.
• Ensure that the mains unit is:
– always readily operable and easily accessible,
– properly plugged into the wall socket,
– not covered or exposed to direct sunlight for longer periods of
time in order to prevent heat accumulation,
– only operated within the permissible temperature range (see
– not operated near heat sources.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety instructions
Intended use of the devices
Intended use includes:
• having read this instruction manual, especially the chapter “Safety
instructions”,
• using the devices within the operating conditions and limitations
described in this instruction manual.
“Improper use” means using the devices other than as described in this
instructions, or under operating conditions which differ from those
described herein.
Safety instructions for the Lithium-Ion rechargeable battery
The BA 300 is a Lithium-Ion rechargeable battery. If abused or misused,
this rechargeable battery may be damaged. Please understand that
Sennheiser does not accept liability for damage arising from abuse or
misuse.
WARNING! In extreme cases, the rechargeable battery may even
present a
• heat hazard
• fire hazard
• explosion hazard
• smoke and gas hazard
Do not heat above
70°C/158°F, e.g. do
not expose to sunlight
or throw into a fire.
Only charge rechargeable
batteries with the appro-
priate Sennheiser chargers.
Do not expose to
moisture.
When not using the
rechargeable battery for
extended periods of time,
charge it regularly
(every six months for
about one hour).
Do not short-circuit.
Only charge rechargeable
batteries at ambient
temperatures between
10°C and 40°C.
Do not mutilate or
dismantle.
Do not charge the
rechargeable battery if
the device is obviously
defective.
Store the devices/
Return defective devices
or devices with defective
rechargeable batteries to
your specialist dealer.
rechargeable batteries
in a cool and dry place
at room temperature.
!
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Delivery includes
Delivery includes
Delivery of the Set 830 S system includes:
1 RI 830 S receiver
with BA 300 Lithium-Ion rechargeable battery
1 TI 830 transmitter
with integrated charging compart-ments
1 EZT 3011 induction loop
1 NT 13 mains unit
with 3 country adapters (EU, UK, US)
1 connection cable
with two 3.5 mm stereo jack plugs
for connection to a headphone socket
3 audio adapters:
1 adapter 3.5 mm to ¼” (6.3 mm) jack plug
1 adapter for RCA socket
1 SCART adapter for SCART socket
1 lanyard
1 clip for attaching the receiver
1 instruction manual
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Product overview
Product overview
Receiver
(see inside cover)
I
1 Channel indicator
2 Volume control
3 On/off button
4 Balance control
5 Channel search button
6 Battery compartment
7 Socket for headphones,
induction loop or
connection cable
to hearing aid
Transmitter
(see inside cover)
II
8 Charging compartment for receiver
9 Charging compartment for optional spare
rechargeable battery
0 Charging indicator for optional spare
rechargeable battery
A Charging indicator for receiver’s
rechargeable battery
B Operation indicator
C “Speech intelligibility” button
D Indicator for the selected speech intelligibility
E Socket (marked blue) for connection of sound
source or external microphone
F Mono/stereo slide switch
G Treble adjustment control
H DC socket (marked yellow) for connection
of mains unit
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Putting the Set 830 S into operation
Putting the Set 830 S into operation
Setting up the transmitter
̈ Place the transmitter so that:
– there are no obstacles in the light path between trans-
mitter and receiver and
– transmitter and receiver are not exposed to direct sun-
light. Direct sunlight may interfere with the reception
and may damage the transmitter.
If you are using a plasma TV screen:
Plasma TV screens radiate an infra-red signal that can
adversely affect the transmission quality.
̈ Make sure that the transmitter is placed as far as pos-
sible from your plasma TV screen.
̈ If necessary, use a standard extension cable (3.5 mm
stereo jack plug) to reduce the distance between trans-
mitter and receiver. This extension cable is available from
your Sennheiser dealer.
Note:
One transmitter can be used to transmit to several
receivers on the same frequency.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Putting the Set 830 S into operation
Connecting the transmitter to a sound source
̈ Switch your sound source (e.g. TV) off before connecting
the transmitter.
I
E
̈ Plug one end of the connection cable I into the blue
socket E on the transmitter.
̈ Check the connection possibilities of your sound source
(e.g. TV).
Connection
possibility
A
B
C
D
Socket on
sound
L
R
–
source
Name of
Head- RCA
SCART
MKE 800 TV-N
connection phone socket socket* external
possibility socket
microphone*
A
B
C
̈ Select one of the four connection possibilities
,
,
D
or
and follow the instructions in the corresponding
chapter.
Note:
If there are several connections (
,
or ) available,
A
B
C
select the SCART socket
.
C
SCART adapter and microphone are also available as
*
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Putting the Set 830 S into operation
Connecting the transmitter to a headphone socket
A
̈ Plug the other end of the connec-
J
tion cable I into the head-phone
socket on your sound source.
I
Is the plug on the connection cable
too small for the headphone
socket?
̈ Plug the adapter to ¼” (6.3 mm)
jack socket J onto the connection
cable I.
̈ Adjust the volume of the headphone socket on your
sound source to a medium level.
This improves the quality of cordless sound transmission.
For detailed information, please refer to the instruction
manual of your sound source (e.g. TV).
Note:
With most TVs, the headphone socket is located at the
front or sides.
Connecting the transmitter to an RCA socket
B
̈ Plug the adapter for RCA
K
socket K onto the connection
cable I.
I
̈ Connect the red connector of
the adapter K to the red RCA
socket R of your sound source.
̈ Connect the white connector of
the adapter K to the white or
black RCA socket L of your
sound source.
Note:
With most TVs, the RCA socket is located at the rear.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Putting the Set 830 S into operation
Connecting the transmitter to a SCART socket
C
̈ Plug the SCART adapter L
L
I
onto the connection cable I.
̈ Connect the SCART adapter L
to the SCART socket on your
TV.
Note:
If your TV has several SCART sockets, use the socket
SCART output.
Using the MKE 800 TV-N external microphone
D
Your sound source doesn’t have any of the connections
mentioned above? You can then use the MKE 800 TV-N
̈ Directly connect the microphone to the blue socket E on
the transmitter.
̈ Position the microphone in front of the loudspeaker of
your sound source.
Note:
You can change the sound by varying the position of the
microphone in front of the loudspeaker.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Putting the Set 830 S into operation
Connecting the transmitter to the mains
̈ Select the suitable country
M
adapter N for your wall
socket.
̈ Plug the suitable country
adapter onto the mains
unit M.
N
EU
UK
US
̈ Connect the yellow connector
of the mains unit to the yellow
socket H on the transmitter.
H
̈ Plug the mains unit M into a
wall socket.
The operation indicator B
on the transmitter lights up
green.
M
Notes:
– When connecting the transmitter to the mains
for the first time, charge the rechargeable
battery for 3 hours as described in the chapter
3h
– If there is no audio signal from the sound source for
about 3 minutes, the transmitter automatically switches
off. The operation indicator B goes off.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Putting the Set 830 S into operation
Wearing the receiver around the neck
Use the supplied lanyard P or induction loop Q to wear
the receiver around your neck.
Note:
If you want to use the receiver with your hearing aid,
attach the induction loop instead of the lanyard.
̈ If necessary, remove the attach-
P
ment clip O from the receiver.
̈ Connect the fasteners of the
lanyard P to the metal ring at the
rear of the receiver.
̈ Wear the receiver around your
neck, with the Sennheiser logo
facing away from your body.
Attaching the receiver to clothing
̈ Attach the clip O or the clip of the
induction loop to the receiver as
shown.
O
O
̈ Attach the clip O to your clothing
or belt.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Putting the Set 830 S into operation
Connecting headphones or the induction loop for
hearing aids to the receiver
The socket 7 on the receiver allows you to connect
• headphones,
• the induction loop Q or
• a connection cable to your hearing aid.
7
̈ Connect the corresponding cable to the socket 7 on the
receiver.
Q
7
If you want to connect the induction loop Q to the receiver:
̈ Set your hearing aid to position “T”.
If your hearing aid has no position “T”, please contact
your hearing aid acoustician.
Note:
For alternative connection possibilities to your hearing
aid as well as the connection to cochlea implants, please
contact your hearing aid acoustician.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Set 830 S
Using the Set 830 S
To switch the Set 830 S system on, proceed as follows:
1. Switch your sound source (e.g. TV) on. The transmitter
automatically switches on (see next chapter).
Switching the transmitter on/off
To switch the transmitter on:
̈ Switch your sound source on.
The transmitter automatically switches on. The opera-
tion indicator B lights up green.
The transmitter doesn’t switch on?
To switch the transmitter off:
̈ Switch your sound source off.
The transmitter automatically switches off after
3 minutes. The operation indicator B goes off.
To disconnect the transmitter from the mains:
̈ Pull out the mains connector from the wall socket.
Note:
When not using the transmitter for extended periods of
time (e.g. when you are on holiday), pull out the mains
connector from the wall socket. In this case, however, the
receiver’s rechargeable battery will not be recharged.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Set 830 S
Switching the receiver on/off
Hearing damage due to high volumes!
CAUTION!
This receiver allows you to set higher
volumes than conventional headphones.
This can cause hearing damage in persons
with healthy hearing and especially in
children.
̈ Before using the receiver, set the volume
on the receiver to a low value.
̈ Do not continuously expose yourself to
high volumes.
Switching the receiver on
1
̈ Press the on/off button 3 for
2 seconds.
The channel indicator 1 lights up.
Switching the receiver off
3
̈ Press the on/off button 3.
The channel indicator 1 goes off.
Notes:
– For how to store and charge the receiver, see
page 18.
3h
– If you are not within the range of the trans-
mitter, the receiver automatically switches off
after 3 minutes.
Adjusting the volume
̈ Use the volume control 2 to adjust
the volume to a sufficient and com-
fortable level.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Set 830 S
Searching for a sound source
̈ Switch the receiver on.
Do you hear the desired sound source?
Yes: The receiver has already found the sound source.
No:
1
5
̈ Briefly press the channel search
The sound source is searched for.
On the receiver, the channel indi-
cator 1 can light up as follows:
Channel
Frequency
You hear
indicator
the sound in
2.3+2.8 MHz
2.3 MHz
stereo
mono
2.8 MHz
̈ If you still haven’t found your sound source, press the
channel search button once more.
You cannot find your sound source?
Note:
The channel indicator ቢ goes off after 30 seconds so
that the light won’t disturb you in a dark room.
Adjusting the balance
The balance control allows for right/left
4
volume adjustment. Adjust the balance
so that you hear equally well with both
ears.
̈ Turn the balance control 4 to the
left L or right R in order to increase the
volume for the corresponding ear.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Set 830 S
Switching between mono and stereo operation
If, despite a correct balance adjustment, you can hear the
sound only with one ear:
̈ Set the ST/MO switch F on the
transmitter to MO (mono).
F
Meaning of the terms “mono” and “stereo”
Stereo (ST)
Mono (MO)
L
R
L + R
Example: L: Speech from the left
R: Music from the right
You hear speech from
the left and music from
the right.
You hear speech and music
coming from the front.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Set 830 S
Individually enhancing the speech intelligibility
The “speech intelligibility” button
allows you to adjust the
sound to your individual needs.
D
C
C
Try out which setting works best for
you.
̈ Press the “speech intelligibility” button C
until the
sound is optimally adjusted to your needs.
Press the
button
1 x
2 x
3 x
4 x
Indicator D
lit yellow
Setting
1
2
3
Default setting
If necessary, you can have the speech intelligibility fine
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Set 830 S
Storing and charging the receiver
̈ After use, place the receiver into
the transmitter’s charging compart-
ment 8 without exerting too much
pressure.
When the receiver is placed correctly
into the charging compartment, the
indicator A lights up:
8
B
A
red: The battery is being charged.
green: The battery is fully charged.
Notes:
– With a fully charged battery, the operating time is up
to 12 hours.
– If you have several receivers, they can be used during
charging.
– Always store the receiver in the transmitter’s charging
compartment 8 to ensure that it is fully charged. The
intelligent battery charging technology prevents over-
charging.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Set 830 S
Charging a rechargeable battery in the
transmitter’s charging compartment
You can charge the receiver’s rechargeable battery or a
spare BA 300 rechargeable battery (not included in the
delivery of the Set 830 S) in the charging compartment9
at the side of the transmitter.
The spare battery offers extended listening time while the
discharged first battery is being recharged.
Note:
Before using the spare rechargeable battery for
the first time, charge it for at least 3 hours.
3h
Removing and charging the receiver’s battery
To remove the receiver’s battery:
̈ Pull the battery out of the receiver’s
battery compartment 6.
6
̈ Insert the receiver’s battery into the
9
charging compartment 9 at the side
of the transmitter as shown.
When the battery is inserted correctly
into the charging compartment, the
indicator 0 lights up:
0
red: The battery is being charged.
green: The battery is fully charged.
̈ Slide the battery into the receiver’s
battery compartment 6 as far as it
will go.
6
19
Download from Www.Somanuals.com. All Manuals Search And Download.
What if...
What if...
...this indicator lights up?
Indicator
Status
Meaning
Channel
indicator 1
on the receiver
lit yellow Receiver has just been
switched on or a button
has just been pressed.
off
Receiver is switched on
for more than 30 secs.
and no button has been
pressed.
Receiver is switched off.
Operation
indicator B
on the trans-
mitter
lit green Transmitter is
switched on.
off
Transmitter is
switched off.
Charging
indicator A
Charging
lit red
Rechargeable battery
is being charged.
lit green Rechargeable battery
is fully charged.
indicator 0
“Speech
lit yellow Speech intelligibility
enhancement is
intelligibility”
indicator D on
the transmitter
switched on.
off
Speech intelligibility
enhancement is
switched off.
...you press this button?
Button
Function
see
page
Channel search Searches for the sound source
or a different channel.
the receiver
“Speech
intelligibility”
Selects one of the possible
settings in order to
individually enhance the
speech intelligibility.
button C on
the transmitter
20
Download from Www.Somanuals.com. All Manuals Search And Download.
What if...
...you change the position of this control/switch?
Control/switch
Function
see
page
Reduces or increases the
volume of the receiver.
Volume control 2
on the receiver
Increases the volume for the
left or the right ear.
Balance control 4
on the receiver
Mono/stereo slide Sets the transmitter to mono
or stereo operation.
switch F on the
transmitter
Treble adjustment Treble adjustment is only to
be made by a hearing aid
technician / an expert.
control G on the
transmitter
...you hear acoustic signals or warning signals?
Acoustic signal
3 ascending beeps
Meaning
The receiver has just
been switched on.
3 descending beeps The receiver has just
been switched off.
1 acknowledgement The channel search
beep
button has been
pressed once briefly.
The channel search
button has been
pressed for
6 seconds.
1–2 short beeps
The receiver is set to
channel 1 or 2.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
What if...
Warning signal
Meaning
6 short
beeps
The receiver does not
receive any signal from
the transmitter:
• Transmitter and
receiver are too distant.
The receiver switches
off after 3 minutes.
• The transmitter is
switched off.
2 long
beeps
The rechargeable battery
is almost flat.
To switch the acoustic signals on
and off:
̈ Press the channel search
button 5 on the receiver for
approx. 5 seconds.
5
You hear a short acoustic signal.
Note:
Warning signals cannot be switched off.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning the Set 830 S
Cleaning the Set 830 S
Cleaning the transmitter and the receiver
Liquids can damage the electronics of the
devices!
CAUTION!
Liquids entering the housing of the devices
can cause a short-circuit and damage the
electronics.
̈ Keep all liquids far away from the devices.
̈ Do not use any cleansing agents or sol-
vents.
̈ Before cleaning, disconnect the transmitter from the
mains.
̈ Use only a slightly damp cloth to clean the devices.
If a problem occurs ...
The transmitter does not switch on
Possible cause
Solution
Is the mains unit
Check the connection of the mains
connected correctly? unit to the transmitter and to the
Is the sound source Switch your sound source on.
switched on?
Is the volume of
the sound source
sufficient?
Set the volume on your sound
source to a medium value.
Is the transmitter
set to operating
mode 2
Take the receiver out of the
charging compartment.
The transmitter automatically
switches on.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
If a problem occurs ...
You cannot hear anything
Possible cause
Solution
Is there a free line
of sight between
receiver and
Remove obstacles in the light path
between receiver and transmitter.
transmitter?
Are transmitter and Avoid exposure to direct sunlight.
receiver exposed to
direct sunlight?
Is the receiver still
within the
Move the receiver closer to the
transmitter. If necessary, switch
transmitter’s range? the receiver on again.
Are all connectors
Check the connection between the
connected correctly? transmitter and your sound source
Is the operation
indicator B lit?
Check if the transmitter is switched
Is the transmitter
set up the wrong
way round?
Set up the transmitter so that
the cables are guided away from
Does the receiver’s Wear the receiver the right way
Sennheiser logo face round, with the Sennheiser logo
the transmitter?
facing the transmitter.
Is the volume of
the sound source
sufficient?
Set the volume on your sound
source to a medium value.
Is the volume of the Increase the volume by turning
receiver sufficient?
the volume control 2 on the
Is the rechargeable
battery inserted
properly into the
receiver and fully
charged?
Check if the channel indicator 1
is lit. If it is not lit: recharge
the rechargeable battery
Remove the rechargeable battery
and reinsert it into the receiver.
If this doesn’t help: recharge
the rechargeable battery
24
Download from Www.Somanuals.com. All Manuals Search And Download.
If a problem occurs ...
You hear the sound only with one ear
Possible cause
Solution
Is the balance
Turn the balance control 4 to
adjusted correctly?
the left or right (see page 15).
Is the transmitter
set to mono?
Set the mono/stereo switch F on
the transmitter to the left
The sound of your sound source is hardly intelligible
Possible cause
Solution
Is the speech
intelligibility
enhancement out
of adjustment?
Press the “speech intelligibility”
button C on the transmitter
until the sound is optimally
adjusted to your needs
Do you use a
plasma TV screen?
Make sure that the transmitter is
placed as far as possible from your
desired channel?
on the receiver to restart the search
for your desired channel.
Is the receiver still
within the trans-
mitter’s range?
Move the receiver closer to the
transmitter. If necessary, switch
the receiver on again.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional technical information
The loudspeakers of your TV are muted
Possible cause
Solution
Some TVs have a
Via the operating menu of your TV,
function that mutes check if and how the muting func-
the loudspeakers
when you connect
a transmitter.
tion can be deactivated.
Use either a different audio socket
on your TV or use the MKE 800 TV-N
If a problem occurs that is not listed in the above tables or
if the problem cannot be solved with the proposed solu-
tions, please contact your Sennheiser partner for assis-
tance.
Additional technical information
Fine adjusting the speech intelligibility
The speech intelligibility can be enhanced individually on the trans-
There are the following settings:
Setting
Indicator D Fine adjustment
lit yellow
1
Compression
2
3
Treble boost
Compression and treble boost
Default
setting
No fine adjustment made
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional technical information
Compression (settings 1 and 3)
Deterioration of the ability to hear quiet sounds as well as loud ones is
a typical symptom of old age. Compression compensates for these
volume differences by boosting the volume of quiet sounds and
reducing the volume of loud sounds if necessary.
Compression seems to put the speech in the foreground, making it
easier to understand.
Compression is self-regulating; once it has been activated, it is not
necessary to make any other settings.
Treble boost (settings 2 and 3)
Another typical age-related phenomenon is the deterioration of the
hearing with regard to high frequencies. However, high frequencies are
important for the intelligibility of speech.
The treble boost makes the speech clearer and easier to understand.
With the treble boost (settings 2 and 3), additional fine adjustment is
possible using the treble boost control G on the rear of the trans-
mitter.
̈ Use a screwdriver to turn the treble boost
control G to the left or right until the sound
can be heard very well.
The position “0” corresponds to a minimum
boost, the position “MAX” corresponds to a
maximum boost, and the control is factory-
preset to the medium position.
G
Function of the treble boost control
By means of the transmitter’s steplessly adjustable treble boost
control G, the audio signal is boosted as shown in the diagram. The
treble boost control G allows you to select one of the curves shown in
the diagram below.
dB
20
“MAX”
10
Factory-preset
setting
“0”
0.1
1
10
kHz
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional technical information
Changing the operating mode
The transmitter can be set to a different operating mode. This is useful
when the sound of your sound source is very low and the transmitter
therefore does not always switch on automatically.
̈ Press the “speech intelligibility” button C
D
for approx. 5 seconds.
C
The indicator D goes off. The charging indi-
cator for the spare rechargeable battery 0
flashes several times:
red: operating mode 2
green: operating mode 1 (factory-preset)
If the operating mode was changed success-
fully, the charging indicator for the spare
rechargeable battery 0 goes off and the
indicator D lights up again.
0
Particularities of operating mode 2:
In operating mode 2, the transmitter is not switched on by the sound
signal from the sound source.
To switch the transmitter on:
̈ Take the receiver out of the charging compartment.
To switch the transmitter off:
̈ Place the receiver into the charging compartment.
If – in operating mode 2 – you want to use a second receiver and charge
its rechargeable battery during operation:
̈ Pull the battery out of the receiver’s battery
compartment 6.
̈ Slide the battery into the transmitter’s
charging compartment 9 as far as it will go.
6
9
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Accessories and spare parts
Accessories and spare parts
CAUTION!
Danger of damage to the device!
Components from other manufacturers (e.g.
for power supply or rechargeable battery)
may cause damage to the device and will
invalidate the warranty!
̈ Use only use original Sennheiser accesso-
ries and spare parts.
Do you wish to use additional receivers?
The following receivers are available from your specialist
dealer:
Cat. No. Accessory/spare part
502021 RI 830 S receiver
502020 RI 830 stethoset receiver
502023 RI 900 stethoset receiver
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Accessories and spare parts
The following Set 830 S accessories are available from your
specialist dealer:
Cat. No. Accessory/spare part
HZL connection cables
001676 HZL 30-6
(3.5 mm jack plug to 1 mini-plug, 40 cm)
004658 HZL 30-600
(3.5 mm jack plug to 1 mini-plug, 60 cm)
001678 HZL 32-6
(3.5 mm jack plug to 2 mini-plugs, 40 cm)
004657 HZL 32-600
(3.5 mm jack plug to 2 mini-plugs, 60 cm)
002408 HZL 34-6E
(3.5 mm jack plug to 1 Euro plug, 40 cm)
004652 HZL 34-600E
(3.5 mm jack plug to 1 Euro plug, 60 cm)
002409 HZL 36-6E
(3.5 mm jack plug to 2 Euro plugs, 40 cm)
004653 HZL 36-600E
(3.5 mm jack plug to 2 Euro plugs, 60 cm)
003448 EZI 120 induction couplers
528184 Clip for attaching the receiver
528185 Lanyard
500898 BA 300 spare rechargeable battery
517627 Extension cable, 3 m
(3.5 stereo jack plug)
500974 MKE 800 TV-N external microphone (mono)
502566 EZT 3011 induction loop
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Specifications
System
Modulation
Carrier frequencies
Frequency response
THD
FM, stereo
2.3 MHz/2.8 MHz
50 Hz–16,000 Hz
< 1 %
Charging time for
rechargeable battery
approx. 3 hours
Signal-to-noise ratio
(1 mV, peak deviation) typ. 75 dB(A)
Operating temperature 10°C to 40°C
Transmitter
Range
up to 12 m within a room
3.5 mm stereo jack socket
Audio/microphone
connection
Power supply
13.5 V DC/500 mA
via NT 13 mains unit
Weight
approx. 260 g
Dimensions
approx. 115 x 145 x 40 mm
Receiver
Audio connection
Max. SPL
3.5 mm stereo jack socket
125 dB (SPL)
Power supply
via BA 300 rechargeable Li-Ion
battery (3.7 V / 150 mAh)
Operating time
Weight
up to 12 hours
approx. 50 g (incl. BA 300)
approx. 72 x 60 x 25 mm
Dimensions
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
NT 13 mains unit
Nominal input voltage
Mains frequency
100 V~ to 240 V~
50–60 Hz
Max. power consumption 2.4 W (incl. battery charging)
Nominal output voltage 13.5 V DC
Nominal output current 500 mA
Standby consumption
approx. 0.9 W
(w/o battery charging)
Ambient temperature
+5°C to +40°C
The devices comply with the following standards:
Europe
EMC: EN 55013, EN 55020
Safety: EN 60065, EN 61558, EN 60950
USA
47CFR15_B
Canada IC ICES-003
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Manufacturer Declarations
Manufacturer Declarations
Warranty
Sennheiser electronic GmbH & Co. KG gives a warranty of 24 months on
this product. For the current warranty conditions, please visit our web
CE Declaration of Conformity
This equipment is in compliance with the essential requirements
and other relevant provisions of Directives 2004/108/EC and
2006/95/EC.
Batteries or rechargeable batteries
Please dispose of exhausted batteries and rechargeable bat-
teries as special waste or return them to your specialist dealer.
WEEE Declaration
Please dispose of this product at the end of its operational life-
time by taking it to your local collection point or recycling centre
for such equipment.
Statements regarding FCC and industry Canada
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment gener-
ates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful inter-
ference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This class B digital apparatus complies with the Canadian ICES-003.
Changes or modifications made to this equipment not expressly
approved by Sennheiser electronic Corp. may void the FCC authoriza-
tion to operate this equipment.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
Index
Receiver
Adjusting the balance 15
Adjusting the volume 14
Attaching the receiver to clothing 11
Channel indicator (meaning) 20
Cleaning 23
Indicators (meaning) 20
No sound signal 24
Operating time 18
Sound only audible with one ear 25
Storing and charging the receiver 18
Switching the acoustic signals off 22
Switching the receiver on/off 14
Wearing the receiver around the neck 11
Rechargeable battery
Replacing and charging the rechargeable battery 19
Special functions
Changing the operating mode 28
Fine adjusting the speech intelligibility 26
Treble boost control 27
Terms
Compression/treble boost 27
Mono/stereo 16
Transmitter
Cleaning 23
Connection to a headphone socket 8
Connection to a SCART socket 9
Connection to a sound source 7
Connection to an RCA socket 8
Connection to the mains 10
Enhancing the speech intelligibility 17
Installation 6
Operation indicator (meaning) 20
Switching between mono and stereo operation 16
Switching the transmitter on/off 13
Troubleshooting 23
Using the MKE 800 TV-N external microphone 9
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Sennheiser electronic GmbH & Co. KG
Am Labor 1, 30900 Wedemark, Germany
Printed in China
Publ.07/08
528251/A01
Download from Www.Somanuals.com. All Manuals Search And Download.
|