Bluetooth headset for phone calls
VMX 200-II
Instruction manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Contents
Important safety information ...................................................................... 2
Delivery includes ............................................................................................ 5
Product overview ........................................................................................... 6
VMX 200-II headset ....................................................................................... 6
Overview of pictograms ............................................................................... 7
Overview of buttons ..................................................................................... 9
Using the VMX 200-II .................................................................................. 13
Managing multiple calls ............................................................................. 19
If a problem occurs ... .................................................................................. 22
Manufacturer Declarations ......................................................................... 25
VMX 200-II | 1
Download from Www.Somanuals.com. All Manuals Search And Download.
Important safety information
Important safety information
̈ Read this instruction manual carefully and completely before using the
product.
̈ Always include this instruction manual when passing the product on to
third parties.
̈ Do not use an obviously defective product.
Preventing damage to health and accidents
̈ Do not listen at high volume levels for long periods of time to prevent
hearing damage.
̈ Always maintain a distance of at least 3.94“ (10 cm) between the ear
cups and the cardiac pacemaker or implanted defibrillator since the
product generates permanent magnetic fields.
̈ Keep the product, accessories and packaging parts out of reach of chil-
dren and pets to prevent accidents and choking hazards.
̈ Do not use the product in an environment that requires your special
attention (e.g. in traffic).
̈ Do not wear the headset during charging since the rechargeable
battery can get warm.
Preventing damage to the product and malfunctions
̈ Always keep the product dry and do not expose it to extreme temper-
atures (hairdryer, heater, extended exposure to sunlight, etc.) to avoid
corrosion or deformation.
̈ Only use attachments/accessories supplied or recommended by
Sennheiser.
̈ Only clean the product with a soft, dry cloth.
̈ Only use the product in environments where wireless Bluetooth®
transmission is permitted.
Intended use/Liability
The VMX 200-II is an accessory for mobile phones or any Bluetooth com-
pliant device with a “hands free profile” (HFP), a “headset profile” (HSP),
an “audio video remote control profile” (AVRCP) and an “advanced audio
distribution profile” (A2DP). It is intended for wireless communication via
Bluetooth connection.
It is considered improper use when this product is used for any application
not named in this instruction manual.
Sennheiser does not accept liability for damage arising from abuse or
misuse of this product and its attachments/accessories.
Sennheiser is not liable for damages to USB devices that are not consistent
with the USB specifications.
Sennheiser is not liable for damages resulting from the loss of connection
due to flat or overaged rechargeable batteries or exceeding the Bluetooth
transmission range.
2 | VMX 200-II
Download from Www.Somanuals.com. All Manuals Search And Download.
Important safety information
Safety instructions for rechargeable batteries
In extreme cases, abuse or misuse of rechargeable batteries can lead to:
WARNING
•
•
•
•
explosion,
fire development,
heat generation or
smoke or gas development.
Dispose of products with
built-in rechargeable bat-
teries at special collection
points or return them to
your specialist dealer.
Switch rechargeable
battery-powered products
off after use.
Only use rechargeable bat-
teries recommended by
Sennheiser and the appro-
priate chargers.
When not using recharge-
able batteries for extended
periods of time, charge
them regularly (about
every 3 months).
Only charge rechargeable
batteries at ambient
temperatures between
10°C/50°F and 40°C/104°F.
Do not heat above
70°C/158°F, e.g. do not
expose to sunlight or
throw into a fire.
VMX 200-II | 3
Download from Www.Somanuals.com. All Manuals Search And Download.
The VMX 200-II Bluetooth headset
The VMX 200-II Bluetooth headset
The stylish new VMX 200-II Bluetooth headset is the wireless solution for
phone calls with superb sound quality. It features VoiceMax Dual Micro-
phone technology that filters away background noise and enhances your
voice, thus providing crystal clear speech.
Bluetooth
The VMX 200-II complies with the Bluetooth 3.0 standard and is compat-
ible with all Bluetooth 1.1, 1.2, 2.0, 2.1 and 3.0 devices with a “hands free
profile” (HFP), a “headset profile” (HSP), an “audio video remote control
profile“ (AVRCP) and an “advanced audio distribution profile” (A2DP). The
VMX 200-II provides wireless freedom to give hands-free convenience
with your mobile phone.
Additional features of the VMX 200-II Bluetooth headset
•
•
•
•
VoiceMax Dual Microphone technology – two microphones work in syn-
ergy; one to emphasize your voice, the other to remove noise
Echo-free conversations – digital echo cancellation eliminates all
echoes while you are talking
Easy call control – with just one hand, you can quickly take or end calls
and adjust the volume to suit you best
HD quality sound – crystal-clear, detailed and transparent sound repro-
duction due to large wideband speaker (11 mm) and extended fre-
quency response
•
•
•
Lightweight comfort – weighs only 10 grams
Flexible wearing style – wear left or right, use with or without ear hook
Long talk time – talk to business partners and friends for up to
10 hours, with up to 12 days of standby time
•
•
Headset battery level indicator displayed on Apple iPhone® screen
Adaptive volume level – automatic, adaptive volume adjustment for
optimized speech intelligibility and sound quality
4 | VMX 200-II
Download from Www.Somanuals.com. All Manuals Search And Download.
Delivery includes
Delivery includes
VMX 200-II mono Bluetooth headset
with built-in rechargeable Lithium-Polymer battery
Ear hook
Ear adapter without loop
Ear adapters with loop (S, M, L)
Power supply unit (EU/US version)
not supplied with the VMX 200-II USB version
Car charger
only for VMX 200-II 3in1 version
Charging cable
Quick Guide
Quick
Guide
Safety
Guide
Safety Guide
A list of accessories can be found on the VMX 200-II product page at
VMX 200-II | 5
Download from Www.Somanuals.com. All Manuals Search And Download.
Product overview
Product overview
VMX 200-II headset
1
3
7
2
6
3
5
4
1 Multi-function button
2 LED
5 Volume up button
6 Ear adapter with loop
7 USB socket
3 Microphone
4 Volume down button
Charging accessories
8
9
0
8 Power supply unit
(EU/US version)
9 Charging cable
0 Car charger
not supplied with the
VMX 200-II USB version
only for VMX 200-II 3in1 version
6 | VMX 200-II
Download from Www.Somanuals.com. All Manuals Search And Download.
Product overview
Overview of pictograms
Meaning of the pictograms for pressing a button
Pictogram
Meaning
Briefly press this button.
2 x
5 s
Double-press this button.
Keep this button pressed for 5 seconds.
Meaning of the pictograms for the beeps
Pictogram
Meaning
Ascending sequence of beeps
Descending sequence of beeps
One beep
Several beeps
Two descending beeps
Two ascending beeps
Meaning of the pictograms for the flashing of the LED
Pictogram
Meaning
This pictogram symbolizes a flashing.
This pictogram symbolizes an interruption.
This pictogram symbolizes a time interval.
Examples of some of the pictograms that are used throughout this instruc-
tion manual:
Pictogram
Meaning
The LED flashes rapidly.
The LED flashes once every 3 seconds.
The LED flashes 3 times per second.
3s
The pictogram “i”
Notes marked with the pictogram “i” provide important information
on the use of the headset.
VMX 200-II | 7
Download from Www.Somanuals.com. All Manuals Search And Download.
Product overview
Overview of the LED indications
Meaning during operation
LED
Meaning
Headset switches on
Headset switches off
Headset is in pairing mode
Pairing was successful
Pairing has failed or has been cancelled
Connectable state, not connected
3s
Once the headset is successfully connected, the LED goes off.
Meaning during calls
LED
Meaning
Incoming call
Incoming call + rechargeable battery is weak
Meaning during charging
LED Meaning
Charging in progress:
battery level between 0% and 50%
Charging in progress:
battery level above 50%
Battery is fully charged
8 | VMX 200-II
Download from Www.Somanuals.com. All Manuals Search And Download.
Product overview
Overview of buttons
Multi-function button
Press the
button
Function
Page
Accepts a call
Ends a call
Transfers a call from the mobile phone to the
headset
Accepts an incoming call and ends the active call
(managing two calls)
(managing two calls)
Stops redialing
Pauses the track/resumes the track
Rejects the incoming call and continues the active
call (managing two calls)
1 s
Establishes a conference call (managing two calls)
Transfers a call from the headset to the mobile
phone
Rejects a call
Voice dialing
2s
Stops voice dialing
Rejects the incoming call and continues the active
call (managing two calls)
Redials the last number
2 x
Accepts an incoming call and puts the active call
on hold (managing two calls)
Toggles between two calls (managing two calls)
Switches the headset on
Switches the headset off
3 s
5 s
Changes to pairing mode
Volume buttons
Button
Duration Function
Increases/reduces the volume
Page
Vol + Vol –
Vol –
2s
2s
Unmutes the headset‘s
microphone
Vol +
Vol +
Vol –
Retrieves information on the
remaining talk time
Resets the headset to the
factory default settings
3 s
Vol + Vol –
VMX 200-II | 9
Download from Www.Somanuals.com. All Manuals Search And Download.
Putting the VMX 200-II into operation
Putting the VMX 200-II into operation
Charging the headset battery
WARNING
Danger of injury!
Wearing the headset when charging can cause burns and injuries.
̈ Do not wear the headset when charging.
A complete charging cycle takes about 1 hour and 20 minutes. Before
using the headset for the first time, charge the rechargeable battery for
a complete charging cycle without interruption.
1:20 h
A charging time of ...
approx. 10 min
approx. 20 min
approx. 40 min
approx. 60 min
approx. 80 min
corresponds to a talk time of ...
approx. 1 h 30 min
approx. 2 h 40 min
approx. 5 h 20 min
approx. 7 h 30 min
approx. 10 h
1
2
Take off the headset and switch it off (see page 15).
Connect the smaller plug of the charging cable to the USB socket of the
VMX 200-II.
3
4
Connect the USB plug of the charging cable to the USB socket of the
power supply unit or your computer.
The battery is being charged.
The LED lights up red until the charge state reaches 50%. Then the LED
lights up blue until the charging cycle is complete. When the recharge-
able battery is fully charged, the LED flashes 3 times blue and then goes
off.
1
2
OFF
3 s
3
4
0 – 50 %
*
50 – 100 %
100 %
**
3x Off
*
not supplied with USB version
only supplied with 3in1 version
**
When the battery level drops below 15 minutes of talk time, the LED
flashes red and you hear a low battery warning every 5 minutes. The
headset automatically switches off after the battery has dropped
below the minimum level.
10 | VMX 200-II
Download from Www.Somanuals.com. All Manuals Search And Download.
Putting the VMX 200-II into operation
Charging the rechargeable battery using the USB smart charging cable
The shapeable USB charging cable allows you to charge the headset so that
it, for example, does not even touch your desk. Its compact size also pre-
vents cable tangles.
Connecting the headset to a Bluetooth device
CAUTION
Danger of malfunction!
The transmitted radio waves of mobile phones can impair the operation of
sensitive and unprotected devices.
̈ Only make calls with the headset in locations where wireless Bluetooth
transmission is permitted.
The headset complies with the Bluetooth 3.0 standard. In order that data
can be transmitted wirelessly using Bluetooth technology, you have to
pair your headset with Bluetooth devices that support the “hands free
profile” (HFP), the “headset profile” (HSP), the “audio video remote
control profile” (AVRCP) and the “advanced audio distribution profile”
(A2DP).
The headset can save the connection profiles of up to eight Bluetooth
devices with which it has been paired. After switch-on, the headset auto-
matically tries to connect to the two last connected Bluetooth devices.
If you pair the headset with a ninth Bluetooth device, the saved connection
profile of the first Bluetooth device will be overwritten. If you want to re-
establish a connection with the first Bluetooth device, you have to pair the
headset again.
connected
stored
VMX 200-II | 11
Download from Www.Somanuals.com. All Manuals Search And Download.
Putting the VMX 200-II into operation
Pairing the VMX 200-II with a Bluetooth device
The following chapter describes, by way of example of a mobile phone,
how to pair the VMX 200-II with a Bluetooth device. In case of deviation,
proceed as described in the instruction manual of your mobile phone.
1
button pressed until the LED alternately flashes blue and red. The
headset is in pairing mode.
2
3
Enable the Bluetooth visibility on your mobile phone.
On the mobile phone, start a search for Bluetooth devices. All available
devices in the proximity of the mobile phone are displayed.
4
5
From the found Bluetooth devices, select “Sennheiser VMX 200-II” to
establish a Bluetooth connection to the headset. If necessary, enter
thedefault PIN code “0000”.
Once the headset is paired with the mobile phone, the LED turns off.
1
3
5
2
Menu
Bluetooth on
Bluetooth off
5 s
20 cm
4
Sennheiser VMX 200-II
Mobile phone Jane
Menu
Add device
Sennheiser VMX 200-II
Keyword:
0000
If pairing is not successful within 5 minutes, the headset automatically
returns to connectable mode. Repeat the pairing procedure.
12 | VMX 200-II
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the VMX 200-II
Wearing the VMX 200-II using the ear hook
If you prefer using the ear hook, always wear it in combination with the ear
adapter without loop to ensure optimum wearing comfort.
1
2
3
Remove the pre-installed ear adapter with loop.
Attach the ear adapter without loop to the headset.
Attach the ear hook to the VMX 200-II. If you want to change the
wearing ear of the headset, attach the ear hook the other way round.
4
5
Move the headset to your ear and guide the ear hook behind your ear.
Position the headset so that it fits comfortably.
14 | VMX 200-II
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the VMX 200-II
Switching the VMX 200-II on/off
Switching the headset on
̈ Press and hold the multi-function button until the LED flashes blue
3 times. The voice prompt “power on” is announced in the headset.
When the headset is paired but not yet connected to the mobile phone,
the LED flashes 3 times blue every 5 seconds. Once the headset and the
mobile phone are connected, the LED goes off and the voice prompt
“connected” is announced in the headset.
”power on“
ON
3 s
Switching the headset off
̈ Press the multi-function button for 3 seconds.
The voice prompt “power off” is announced in the headset and the LED
flashes red 3 times. The headset switches off.
If the headset is switched off during an active call, the call will be trans-
fered to the mobile phone.
”Power off“
OFF
3 s
If the headset has not been used for more than 1 hour, it automatically
switches off to conserve battery power.
Connection profiles and volume settings are saved automatically
when the headset is switched off.
VMX 200-II | 15
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the VMX 200-II
Making calls using the headset
Making a call
̈ Dial the desired number on your mobile phone.
You hear a beep in the headset.
̈ If your mobile phone does not automatically transfer the call to the
headset, simply press the multi-function button once to transfer the
call from the mobile phone to the headset. Alternatively, press a button
on your mobile phone (see the instruction manual of your mobile
phone).
Accepting/rejecting/ending a call
When your VMX 200-II is connected to a mobile phone and you receive
a call, you hear a ring tone in the headset and the LED flashes blue. If the
headset battery is low, the LED flashes red instead of blue.
If you listen to music, the music is paused until you end the call.
When you receive a call and your headset is switched off, simply switch
your headset on to accept the call.
̈ Press the multi-function button:
Duration Function
Voice prompt/beeps
Accepts a call
Rejects a call
Ends a call
”Rejecting call”
”Call ended”
2s
Transfering the call to/from the headset
Once a connection is established, you can transfer the call to/from the
headset.
̈ Press the multi-function button:
Duration Function
Beep(s)
Transfers a call from the headset to
the mobile phone
2s
Transfers a call from the mobile
phone to the headset
VMX 200-II | 17
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the VMX 200-II
Redialing
The redialing function must be supported by your mobile phone or
Bluetooth device (with HF profile respectively) and be activated.
̈ Press the multi-function button:
Duration Function
Voice prompt
2 x
Redials the last number
Stops redialing
”Redialing”
”Call ended”
Voice dialing
The voice dialing function must be supported by your mobile phone (with
HF profile) and be activated. Follow the instructions in the instruction
manual of your mobile phone.
̈ Press the multi-function button for about 2 seconds until you hear
2 beeps. Release the multi-function button to start the voice dialing.
Duration Function
Voice prompt
Starts/stops voice dialing
”Voice dial“
2s
̈ Say the name of the person you want to call.
The mobile phone automatically dials the corresponding number.
Muting the headset’s microphone
̈ Press the Volume up or down button:
Duration Function
Voice prompt
”Mute on“
Mutes the headset’s microphone
2s
Unmutes the headset’s microphone ”Mute off“
2s
While the microphone is muted, you hear a beep every 4 seconds.
18 | VMX 200-II
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the VMX 200-II
Managing multiple calls
You can use the VMX 200-II simultaneously with two connected Bluetooth
devices (Multi Connection).
In order for this to function, at least two Bluetooth devices must already
be paired with the headset. To do so, follow the instructions in the chapter
“Connecting the headset to a Bluetooth device” (see page 11).
̈ Switch the headset on. The headset automatically tries to establish
a Bluetooth connection to the two last connected Bluetooth devices.
Managing two calls
You can manage two calls:
•
•
from either two different Bluetooth devices or
from one Bluetooth device.
If you want to manage two calls from one Bluetooth device, disconnect
the second Bluetooth device.
If you receive a call during an active call:
̈ Press the multi-function button:
2nd
Duration Active call incoming call Function
Accepts the incoming call and
ends the active call
Voice prompt: ”Call ended”
Accepts the incoming call and
puts an active call on hold
(toggling – phone dependent)
2 x
2s
Rejects the incoming call and
continues the active call
If you put an active call on hold (toggling):
̈ Press the multi-function button again:
2nd call
Duration Active call put on hold Function
Ends the active call and makes the
call on hold active
(phone dependent)
Establishes a conference call
(for 2 calls on one mobile phone
only)
2s
VMX 200-II | 19
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the VMX 200-II
Listening to music using the headset
If your headset has a Bluetooth connection to an audio source (e.g. mobile
phone, tablet or computer) and supports the A2DP/AVRCP standard, you
can use the headset to listen to music and remote-control your audio
source.
Once music is selected and started from the audio source, further changes
can be activated directly from the headset as follows:
̈ Press the multi-function button or the Volume up or down button:
Duration Function
Resumes the track (if paused)
Pauses the track
Duration Function
Skips to the next track
2s
2s
Skips to the previous track
Duration Music
Function
Pauses the track and activates
voice dialing
2s
Pauses the track and starts
redialing
2 x
20 | VMX 200-II
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and maintaining the VMX 200-II
Cleaning and maintaining the VMX 200-II
CAUTION
Liquids can damage the electronics of the product!
Liquids entering the housing of the device can cause a short circuit and
damage the electronics.
̈ Keep all liquids far away from the product.
̈ Do not use any cleansing agents or solvents.
Cleaning the headset
̈ Only use a dry cloth to clean the product.
Storing the headset
If you do not use the headset for extended periods of time:
̈ Charge the built-in rechargeable battery every 6 months for about 1 hour.
̈ Store the headset in a clean and dry environment.
VMX 200-II | 21
Download from Www.Somanuals.com. All Manuals Search And Download.
If a problem occurs ...
If a problem occurs ...
Problem
Possible cause
Possible solution
Page
Headset cannot The rechargeable
be switched on battery is flat.
Recharge the recharge-
able battery.
No audio signal The headset is not
paired with the
Check if the headset is
paired. If necessary, pair
the headset with the
mobile phone again.
mobile phone.
The volume is
adjusted too low.
Increase the volume.
–
The headset is
switched off.
Switch the headset on.
Headset cannot The pairing does
Check if the your
Bluetooth device
supports the HF or
HS profile.
be paired
not work.
The mobile phone
is switched off.
Switch the mobile
phone on.
Headset does
The operation of the Reset the headset to
not react to any headset is faulty.
button press
the factory default
settings.
If a problem occurs that is not listed in the above table or if the problem
cannot be solved with the proposed solutions, please contact your local
Sennheiser partner for assistance.
To find a Sennheiser partner in your country, search at
Restoring factory default settings (Reset)
You can restore the following settings to their factory default settings:
•
list of paired Bluetooth devices (afterwards empty)
1
nately blue and red, indicating that the headset is in pairing mode.
2
Simultaneously press and hold the volume up button and the volume
down button for 3 seconds.
1
2
3 s
5 s
Vol +
Vol -
22 | VMX 200-II
Download from Www.Somanuals.com. All Manuals Search And Download.
If a problem occurs ...
If you are out of the Bluetooth transmission range
Calling is only possible in the Bluetooth transmission range of the mobile
phone. The transmission range largely depends on environmental condi-
tions such as wall thickness, wall composition etc. With a free line of sight,
the transmission range of most mobile phones and Bluetooth devices is up
to 10 meters.
If the headset gets out of the the Bluetooth transmission range of the
mobile phone, the sound quality deteriorates and the voice prompt “lost
connection” is announced in the headset. This announcement is repeated
at regular intervals for 5 minutes.
If you re-enter the Bluetooth transmission range within these 5 minutes,
the connection is re-established and the voice prompt “connected” is
announced in the headset.
If you spend more than 5 minutes outside the Bluetooth transmission
range, the connection breaks down completely and you have to manually
re-establish the connection.
To re-establish a connection to the mobile phone:
̈ Briefly press the multi-function button.
Once the connection is successfully re-established, the voice prompt
“connected” is announced in the headset.
”connected“
10 m
VMX 200-II | 23
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Specifications
VMX 200-II
Dimensions (W x H x D)
Weight without ear hook
Standby time
approx. 55 x 26 x 58 mm
approx. 10 g
up to 12 days
Talk time
up to 10 hours
Charging time
1 h 20 min
Rechargeable battery (built-in)
Speaker type
Lithium Polymer; 3.7 V; 120 mA
dynamic, neodymium magnet
Microphone type
dual omni-directional electret
microphone
Audio
digital noise and echo suppression
Operating temperature range
+10°C (+50°F) to
+40°C (+104°F)
Operating relative humidity
Storage temperature range
Storage relative humidity
Car charger – model number*
20 to 85%, non-condensing
20°C (4°F) to +60°C (140°F)
10 to 95%, non-condensing
CAWQ02-5.0-150C/SIL-C05050A
Bluetooth
Bluetooth
version 3.0
Range
up to 10 m/class 2
2402 MHz to 2480 MHz
Transmission frequency
Profiles
HSP (v1.2), HFP (v1.6),
A2DP (v1.2), AVRCP (v1.0)
Output power
3.07 dbm/2.028 mW
VMX 200-II power supply unit*
Model number
US version: SSA-3P 050015US
EU version: SSA-3P 050015EU
Nominal input voltage
Nominal input current
Mains frequency
100 – 240 V~
max. 0.2 A
50 – 60 Hz
5 V
Nominal output voltage
Nominal output current
Operating temperature range
max. 150 mA
+10°C (+50°F) to
+40°C (+104°F)
Operating relative humidity
Storage temperature range
Storage relative humidity
Weight
20 to 85%, non-condensing
20°C (4°F) to +60°C (140°F)
10 to 95%, non-condensing
approx. 75 g
* Not supplied in VMX 200-II USB version.
24 | VMX 200-II
Download from Www.Somanuals.com. All Manuals Search And Download.
Manufacturer Declarations
Manufacturer Declarations
Warranty
Sennheiser electronic GmbH & Co. KG gives a warranty of 24 months on this
product. For the current warranty conditions, please visit our website at
FOR AUSTRALIA ONLY
Sennheiser’s goods come with guarantees that cannot be excluded under
the Australian Consumer Law. You are entitled to a replacement or refund
for a major failure and compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired or
replaced if the goods fail to be of acceptable quality and the failure does
not amount to a major failure.
This warranty is in addition to other rights or remedies under law. Nothing
in this warranty excludes, limits or modifies any liability of Sennheiser
which is imposed by law, or limits or modifies any remedy available
to the consumer which is granted by law. To make a claim under this
warranty, contact Syntec International Pty Ltd, Unit 3, 31 Gibbes Street
Chatswood NSW 2067, AUSTRALIA Phone: (02) 9910 6700, email:
[email protected]. All expenses of claiming the warranty will be
borne by the person making the claim.
The Sennheiser International Warranty is provided by Syntec International
Pty Ltd (ABN 94003433798), unit 3, 31 Gibbes Street Chatswood NSW
2067 Australia.
In compliance with the following requirements
•
•
RoHS Directive (2002/95/EC)
WEEE Directive (2002/96/EC)
Please dispose of this product by taking it to your local collection
point or recycling center for such equipment. This will help to
protect the environment in which we all live.
•
Battery Directive (2006/66/EC)
The product built-in rechargeable batteries can be recycled. In
order to protect the environment, please dispose of defective
products with built-in rechargeable batteries as special waste or
return them to your specialist dealer.
CE Conformity
•
•
•
•
R&TTE Directive (1999/5/EC)
EMC Directive (2004/108/EC)
Low Voltage Directive (2006/95/EC)
ErP Directive (2009/125/EC)
The CE Declaration of Conformity is available on our website at
observe the respective country specific regulations!
VMX 200-II | 25
Download from Www.Somanuals.com. All Manuals Search And Download.
Manufacturer Declarations
In compliance with:
USA
FCC ID: DMOCBMSDE
Canada
Europe
IC: 2099A-VMX200II
Australia/
New Zealand
Singapore
Russia
ME10
Japan
Korea
R
201-125641
䂹Ḿꢀ♹ⱥⱩ⦉ᷙꢀㇹꢀ㑖㍉㹑䆁⸥ꢀᝅᷪⱶ㊹ꢀ㋍㊑ꢁꢀ
䂹Ḿꢀ♹ⱥⱩ⦉ᷙꢀ㍉㹑䆁⸥ꢀᝅᷪⱶ㊹ꢀ㋍㊁✅⎡ꢀ㊽◊ろ㍉ᡁꢀᡅ⍭
ὡꢀⱡ⦉ⷩᷙꢀ䂥ꢀⵝꢀㄋ㊑ꢁ
Certification no.
KCC-CRM-SE9-VMX200-II
Product name
Model
Bluetooth headset
VMX 200-II
Applicant
Manufacturer
Country of Origin
Sennheiser electronic GmbH & Co. KG
Sennheiser electronic GmbH & Co. KG
China
Bluetooth
26 | VMX 200-II
Download from Www.Somanuals.com. All Manuals Search And Download.
Manufacturer Declarations
Statements regarding FCC and Industry Canada
This device complies with Part 15 of the FCC Rules and with Industry
Canada standard(s) for license-exempt radio devices. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules and RSS 210
of Industry Canada. These limits are designed to provide reasonable pro-
tection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guar-
antee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television recep-
tion, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications made to this equipment not expressly approved
by Sennheiser electronic Corp. may void the FCC authorization to operate
this equipment.
RF Radiation Exposure Information
Since the radiated output of this device is far below the FCC/IC RF radio fre-
quency exposure limits, it is not subjected to routine RF exposure evalua-
tion as per Section 2.1093 of the FCC rules and RSS GEN rules sections 2.5.1
& 2.5.2.
Trademarks
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by Sennheiser electronic
GmbH & Co. KG is under license.
iPod® and iPhone® are registered trademarks of Apple Inc, registered in the
U.S. and other countries.
VMX 200-II | 27
Download from Www.Somanuals.com. All Manuals Search And Download.
|
