®
DuraSpin DS300-24V
Cordless Collated Screwdriver
Fastening Solutions™
The powerful SENCO DS300-24V is a cordless utility tool
designed for a wide variety of screw applications.
Professional remodelers, contractors and DlYers will
appreciate the convenience of the 3000 rpm collated screw
system, which increases productivity by eliminating the
need for handling loose screws. The DS300-24V comes
with a powerful 24v battery to drive 11/4" – 3" screws into
even the toughest work surfaces. With the built-in extension
you can adjust tool to the proper height to speed
productivity and save your back and knees.
Applications:
Ideal for deck builders, floor sheathing, remodelers and
high end DIYers.
Tool Specifications:
Item Code: 1N0001N
Battery Voltage: 24 volts
Battery Ampacity: 2.0 amps
Battery Recharge Time: One hour
RPM: 3000
Weight: 10.8 lbs. (4.9 kg)
Height: 6 7/8" (175 mm)
Length: collapsed 311/2" (800 mm),
fully extended 411/2" (1054 mm)
Width: 4" (102 mm)
Features and Benefits:
• 24 Volts of Power
• 3000 RPM high-torque motor drives screws without
bogging down
• Drives 11/4" – 3" screws, even into hard woods and
composites
• Easy depth-of-drive adjustment regulates the precise
amount of countersink
Fastener Capacity: 50 screws (one strip)
Torque Delivered: 70 in-lbs
• Fast and simple adjustable height extension
• Ergonomically designed to position hands directly over
screw for precise straight drives
• Comfortable grip for less exertion
• Reverse switch to back out driven screws
• Trigger lock for continuous work
Fastener Specifications:
Screw Lengths: 11
/4" – 3" (32 mm – 75 mm)
Screw Diameters: #6 – #10 (see reverse side for chart)
• Patented clutch design means long-lasting durability
• Fast and easy loading of screws
®
• Easy bit change – from Phillips to square
• Super-tough drive bits – the longest lasting bits available
• One-year warranty
• Each kit comes complete with tool, two 24 volt batteries,
battery charger, spare drive bits, wrenches, spare non-slip
nose pads and rugged carrying case
Average number of screws
Screw Type
driven per battery charge
#8 X 2"
450
350
250
#8 X 2-1/2"
#9 X 3"
These are representative averages. Your results may vary based on
specific work conditions.
©2005 by Senco Products, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
|