Seiko Watch H024 User Guide

Cal. H024  
INSTRUCTIONS  
(P.  
3)  
INSTRUCTIONS  
INSTRUCCIONES  
BEDIENUNGSANLEITUNG  
ISTRUZIONI  
(P. 33)  
(P. 63)  
(S. 93)  
(P. 123)  
(P. 153)  
INSTRUÇÕES  
(183  
)
Download from Www.Somanuals.com. All Manuals Search And Download.  
BUTTONS & DISPLAY  
[TIME/CALENDARmode]  
SEIKO DUO-DISPLAY QUARTZ  
Cal. H024  
FEATURES  
Hour hand  
Minute hand  
STOPWATCH  
TIME/CALENDAR  
Hour and minute hands  
Fully automatic calendar from  
Jan. 1. 2006 to Dec. 31, 2055  
Measures up to 23 hours, 59  
minutes and 59.999 seconds in  
1/1000-second increments  
Laptime/splittimemeasurement  
Stores the first 100 lap and split  
times in memory.  
ALARM  
Two daily alarms work  
independently.  
Mode indicator  
MEMORY RECALL  
FUNCTION  
TIMER  
Countdown timer  
A time-up warning beep and  
time-up beep  
The stored lap and split times  
can be recalled.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
5
TIME/CALENDAR MODE (TIME)  
The calendar adjusts automatically for odd and even months including February of  
leap years from 2006 up to 2055.  
MODE CHANGE  
With each press, the mode in the digital display changes in the  
A
following order:  
Press to show TIME/CALENDAR mode.  
A
[FULL (Time & Calendar) Display]  
[D&D(Day & Date) Display]  
Date  
Date  
Minute hand  
Hour hand  
Mode indicator  
: The flashing STOPWATCH/  
TIMER indicator in any display  
mode shows that the  
stopwatch/timer is counting.  
If left untouched  
for 2 minutes  
B
C
A
Day of  
the week  
TIME  
TIME/  
CALENDAR  
mode  
CHR  
STOPWATCH  
RCLL  
MEMORY  
RECALL  
mode  
ALM  
ALARM  
mode  
TMR  
TIMER  
mode  
Mode indicator  
Press any one  
button.  
mode  
A
D
Second  
PM indicator for  
12-hour display only  
Day of the week  
Hour  
Minute  
:  
When the hourly time signal/confirmation sound for button operation is switched on,  
a beep sounds with each press of Button A.  
:  
If the watch is left untouched for 2 minutes when Day & Date Display is selected, the  
digital time disappears and only the day and date are shown. To show  
the digital time, press any one of the four buttons.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6
7
TIME/CALENDAR SETTING  
Set the digital time first before setting the analogue time, as the hour and minute  
hands move together with the digital time.  
If the digital time display cannot be seen because of positions of the hour and  
minute hands, advance them by pressing button D before setting the digital time.  
Analogue time setting  
Press to show analogue time setting  
display.  
C
C
Press repeatedly to set Hour and  
Minute hands to match the digital  
time.  
D
Press for 2 to 3 seconds to show TIME/  
CALENDAR SETTING display.  
* The second digits start flashing.  
Digital time/calendar setting  
B
C
(See *3 on page 22)  
B
C
D
Press for the display selection.  
C
Press to select an item(flashing) to be  
adjusted. With each press of the but-  
ton, a flashing item changes over in  
the following order  
Analogue time setting display  
Press to select the desired display.  
D
D
(See *1 on page 22)  
*
[FULL(Time & Calendar) Display] or  
[D&D(Day Date) Display] can be  
alternatively selected.  
&
Second  
Hour  
Minute  
12-/24-hour  
display  
Press to return to TIME/CALENDAR  
mode. (See *4 on page 22)  
Date  
B
*
Seconds setting  
Month  
Year  
By pressing the button,the seconds  
are reset to "00" and start counting  
immediately.  
Press to adjust the selected item.  
D
(See *2 on page 22)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8
9
ENGAGEMENT/DISENGAGEMENT OF HOURLY TIME SIGNAL AND  
TURNING ON/OFF OF CONFIRMATION SOUND FOR BUTTON OPERATION  
STOPWATCH MODE (CHR)  
Stopwatch measures up to 23 hours, 59 minutes and 59.999 seconds in 1/1000-  
second increments.  
With each press in TIME/CALENDAR mode,  
The lap time display and split time display can be shown alternately. However,  
while the stopwatch is counting, the display cannot be changed to another.  
(See *6 on page 23)  
C
the hourly time signal and confirmation sound  
for button operation are alternately switched  
on and off. (See *5 on page 22 )  
C
Hourly time signal indicator  
(displayed when hourly time signal and confirmation  
sound are switched on)  
A
Press to show STOPWATCH mode.  
1/1000 second  
✩✩ When all indicators light ✩✩  
C
B
Lap/Split number  
Mode indicator  
Lap/Split display indicator  
If all indicators of the display light while in the  
TIME/CALENDAR mode, it is not a malfunction.  
(See "ALARM TEST AND DEMONSTRATION MODE" on  
page 21 )  
This happens if Button C and D are pressed at the  
same time during time setting. In such a  
case,press any one of the four buttons to return  
to the TIME/CALENDAR mode.  
C
D
A
D
Hour  
Minute  
Second  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10  
11  
STOPWATCH OPERATION  
Before using the stopwatch, reset the digital counter to read “00:00'00"000” by  
pressing Button D.  
Press when the stopwatch is reset to select the lap time or split time display.  
With each press of button B, the display indicator “LAP” and “SPLIT”  
appear alternately.  
B
C
D
1 Standardmeasurement  
3 Lap time measurement  
C
C
D
START  
STOP  
RESET  
C
D
LAP 1  
D
LAP 2  
C
D
RESET  
FINAL LAP/  
STOP  
START  
2 Accumulated elapsed time measurement  
*
*
Timing and release of lap times can be repeated as many times as required by pressing Button D.  
The lap time measured remain displayed for 10 seconds together with the flashing lap indicator, and  
then, the display automatically returns to the measurement in progress.  
When Button C is pressed at the end of timing, the final lap time is displayed for 10 seconds with the  
flashing lap display indicator, and then the display automatically changes to show the final split time.  
C
START  
C
C
C
D
RESTART  
STOP  
RESET  
*
STOP  
* Stop and restart of stopwatch can be repeated as many times as required by pressing Button C.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
12  
13  
MEMORY RECALL MODE (RCLL)  
The first 100 lap and split times are automatically stored in memory and can be  
recalled either during or after the stopwatch measurement.  
4 Split time measurement  
Even if the digits are reset to “00” in the stopwatch measurement, the stored data  
is not erased and can be recalled unless a new measurement is started.  
In order to recall lap and split times while timing an event, press Button A to cycle  
through the 5 different modes. The stopwatch mode indicator (CHR) will continue  
to flash to indicate that the STOPWATCH mode is in use.  
C
D
SPLIT 1  
D
SPLIT 2  
C
D
START  
FINAL SPLIT/ RESET  
STOP  
*
*
Timing and release of split times can be repeated as many times as required by  
pressing Button D.  
The split time measured remain displayed for 10 seconds together with the flashing  
split indicator, and then the display automatically returns to the measurement in  
progress.  
Press to show the MEMORY RECALL mode.  
A
*
When Button C is pressed at the end of timing, the final split time is displayed for 10  
seconds with the flashing split display indicator, and then the flashing stops.  
Lap time” is the time that has  
Lap 1  
Lap 2  
elapsed from the start of one stage  
of an activity to that of the next  
stage. “Split time” is the time  
that has elapsed from the start of  
an activity to any given stage.  
Start  
Split time  
A
Ex.)  
Lap No.1: 30 sec. Split No.1: 30 sec.  
Lap No.2: 40 sec. Split No.2: 1 min.,10 sec.  
Lap No.3: 45 sec. Split No.3: 1 min.,55 sec.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
14  
15  
TIMER MODE (TMR)  
The timer can be set up to 23 hours and 59 minutes in minute increments. (See *8  
on page 23)  
Press to select the data (lap time/split time) to be recalled. With each press  
of Button B, the lap time and split time are displayed alternately.  
B
A time-up warning beep sounds 3 seconds before the set time is up. When the set  
time is up, time-up beep sounds for 5 seconds.  
TIMER SETTING  
A
Press to show TIMER mode.  
Press for 2 to 3 seconds to show TIMER  
SETTING display.  
B
With each press, stored data are recalled from the newest to the oldest.  
C
* The minute digits start flashing.  
OR  
Press to select an item (flashing) to be  
adjusted.  
C
With each press, stored data are recalled from the oldest to the newest.  
D
A
(See *7 on page 23)  
Minute  
Hour  
Press to adjust the selected item.  
(See *2 on page 22 and *8 on page 23)  
D
Press to exit from the MEMORY RECALL mode.  
Press to return to TIMER mode.  
B
Download from Www.Somanuals.com. All Manuals Search And Download.  
16  
17  
ALARM MODE (ALM)  
Two daily alarms work independently.  
TIMER OPERATION  
The alarms can be set in minute increments.  
The alarms can be engaged and disengaged independently of one another.  
C
D
Press to show ALARM mode.  
A
B
C
C
START  
C
STOP  
C
RESTART  
C
STOP  
D
RESET  
Mode indicator  
PM indicator for 12-hour  
display only  
* Stop and restart of the timer can be repeated as many times as required by pressing Button C.  
* A time-up warning beep sounds 3 seconds before the set time is up. When the set time is up, time-  
up beep sounds for 5 seconds.  
A
D
* If Button D is pressed when the timer is stopped, the display returns to show the set timer time.  
Alarm indicator  
Alarm time  
*
The timer will continue to count down even if you move to one of the other 5 modes by pressing Button  
A. If the timer is counting down and the watch is displaying one of the other modes, the timer mode  
indicator (TMR) will flash.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
18  
19  
ALARM TIME SETTING  
ALARM ENGAGEMENT/DISENGAGEMENT  
Press for 2 to 3 seconds to show ALARM  
SETTING display.  
Press to show ALARM mode.  
B
A
B
C
*
The hour digits start flashing.  
With each press, alarm is alternately engaged and disengaged.  
Press to select an item (flashing) to be  
adjusted.  
C
C
C
C
Hour  
Minute  
D
A
Press to adjust the selected item.  
(See *9 on page 23)  
“on” indicator  
D
Alarm indicator  
“off” indicator  
Press to return to ALARM mode.  
B
[Alarm engaged]  
[Alarm disengaged]  
*
The alarm mark is displayed and the alarm is  
automatically engaged.  
*
The alarm sounds at the designated time for 20 seconds. To stop it manually, press any one of the four  
buttons. If the alarm sounds while the stopwatch is operating, press button A or B to stop the alarm.  
*
If you want to use the alarm channel 2, press  
Button D to select “ch” number, and follow  
the above procedures.  
ALARM TEST AND DEMONSTRATION MODE  
Press and hold Buttons C and D at the same time in the TIME/CALENDAR mode.  
The alarm sound can be heard, and then the DEMONSTRATION mode will start,  
showing the display of each mode repeatedly. To stop the demonstration, press  
any of the buttons.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
20  
21  
*6 Remarks on stopwatch function:  
• The lap number counts up to “199”. After “199”, the number is displayed in two digits  
such as “00” for 200, “00” for 300, and so on.  
• The split number counts up to “199”. After “199”, the number is displayed in two  
digits such as “00” for 200, “00” for 300, and so on.  
NOTES ON OPERATING THE WATCH  
*1-*5 Remarks on time/calendar function:  
*1 • The day of the week is automatically set once the year, month and date are set.  
• When the time is set in the 24-hour display, the alarm time will also be shown in the  
24-hour display.  
*7 Remarks on memory recall function:  
*2 • The digits,other than seconds and “12H”/“24H”, advance quickly if Button D is kept  
pressed.  
• When the seconds read any number between “30” and “59” and Button D is  
pressed, one minute is added.  
• In memory recall after measurement, the oldest measurement in memory is displayed. In  
memory recall during measurement, the newest measurement in memory is displayed.  
*8 Remarks on timer function:  
• The digits advance quickly if Button D is kept pressed.  
• Pressing button A while the digits are flashing can reset the timer to “0:00,” and the  
minute digits start flashing.  
• If the watch is left untouched in the TIMER SETTING display with an item flashing,  
it will automatically return to the TIMER mode in 2 to 3 minutes.  
*9 Remarks on alarm function:  
• The digits advance quickly if Button D is kept pressed.  
• When the time in the TIME/CALENDAR mode is set in the 24-hour display, the alarm  
time will also be shown in the 24-hour display.  
• When setting the hours in the 12-hour display, check that AM/PM is properly set. “P”  
mark appears when the alarm time is set to PM.  
• When setting the hours in the 12-hour display, check that AM/PM is properly set. A  
PM indicator (“P” mark) from the afternoon is shown when the 12-hour display is  
selected. In the 24-hour display, there is no such indicator.  
*3 • The hands move clockwise by pressing Button D. They move quickly if the button is  
kept pressed.  
• The hands keep advancing if Button D is released. Press Button D again to stop  
them.  
• After the digital and analogue times are set, if you want to correct digital time to adjust  
second digits only, it is not necessary to adjust analogue time again  
*4 If the watch is left untouched in the TIME/CALENDAR SETTING display with an item  
flashing, it will automatically return to the TIME/CALENDAR mode in 2 to 3 minutes.  
*5 The hourly time signal will not ring while alarm is sounding.  
• If the watch is left untouched in the ALARM SETTING display with an item flashing,  
it will automatically return to the ALARM mode in 2 to 3 minutes.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
22  
23  
NECESSARY PROCEDURES AFTER CHANGING THE BATTERY  
* After the battery is replaced with a new one , or in case an abnormal display (broken  
numerals or letters etc.) appear, follow the procedures below to reset the IC.  
BATTERY LIFE INDICATOR  
When the second digits start flashing in the TIME/CALENDAR mode, replace the  
battery with a new one as soon as possible. Otherwise, the watch will stop  
operating in a couple of days. We suggest that you have the battery replaced by an  
AUTHORIZED SEIKO DEALER.  
Press and hold the four buttons for 2 to 3  
seconds at the same time.  
* Even after the battery life indicator appears, time accuracy is not affected.  
B
A
C
D
BATTERY CHANGE  
All digital indicators disappear at  
once and the display shown at left  
appears when the buttons are re-  
leased.  
The miniature battery which powers your watch should last approxi-  
mately 3 years. However, because the battery is inserted at the  
factory to check the function and performance of the watch, its actual  
life once in your possession may be less than the specified period.  
When the battery expires, be sure to replace it as soon as possible  
to prevent any malfunction. For battery replacement, we recom-  
mend that you contact an AUTHORIZED SEIKO DEALER and request  
SEIKO SR1130W battery.  
Set the digital time/calendar and analogue  
time.  
(See “TIME/CALENDAR SETTING” on page 8)  
*
All digital indicators are reset to show  
" 1" , " SUN" and "12:00 00" in the TIME/  
CALENDAR mode.  
* The battery life may be less than 3 years if:  
• the alarm is used for longer than 20 seconds a day,  
• the stopwatch is used for longer than 3 minutes a day,  
• the confirmation sound is used more than 10 times a day, and/or  
• the timer is used more than once a day.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
24  
25  
TO PRESERVE THE QUALITY OF YOUR WATCH  
WARNING  
WATER RESISTANCE  
Do not remove the battery from the watch.  
Accidental  
Condition  
of use  
If it is necessary to take out the battery, keep it out of the reach of children.  
If a child swallows it, consult a doctor immediately.  
contact  
with water  
such  
Taking a  
bath and  
shallow  
diving  
Swimming,  
yachting  
and taking  
a shower  
Scuba  
diving**  
and  
saturation  
diving  
Indication on  
case back  
Never short-circuit, tamper with or heat the battery, and never expose it to  
fire. The battery may burst, become very hot or catch fire.  
Degree  
of water  
as rain  
and  
resistance*  
splashes  
CAUTION  
Non-water  
resistant  
No indication  
No  
Yes  
Yes  
No  
No  
Yes  
No  
No  
No  
No  
No  
No  
The battery is not rechargeable. Never attempt to recharge it, as this may  
cause battery leakage or damage to the battery.  
WATER  
RESISTANT  
3 bar  
5 bar  
WATER  
RESISTANT  
5 BAR  
WATER  
RESISTANT  
10/15/20 bar  
Yes  
Yes  
Yes  
No  
10/15/20 BAR  
Download from Www.Somanuals.com. All Manuals Search And Download.  
26  
27  
Non-water resistant  
• If the watch becomes wet, have it  
* Pressure in bar is a test pressure and  
should not be considered as  
corresponding to actual diving depth  
since swimming movement tends to  
increase the pressure at a given  
depth. Care should also be taken on  
diving into water.  
** We recommend that you wear a  
SEIKO Diver’s Watch for scuba  
diving.  
CARE OF CASE AND BRACELET  
SHOCKS & VIBRATION  
Be careful not to drop your watch  
or hit it against hard surfaces.  
To prevent possible rusting of  
the case and bracelet, wipe them  
periodically with a soft dry cloth.  
checked by an AUTHORIZED  
SEIKO DEALER or SERVICE  
CENTER.  
Water resistant 5/10/15/20 bar  
PERIODIC CHECK  
MAGNETISM  
• Do not operate the buttons when  
the watch is wet or in water.  
If used in sea water, rinse the  
watch in fresh water and dry it  
completely.  
• When taking a shower with a  
water resistant 5 bar watch, or  
The analogue unit of your watch  
will be adversely affected by strong  
magnetism, though the digital unit  
will not be affected. Keep the  
watch away from close contact with magnetic  
objects.  
It is recommended that the  
watch be checked once every 2  
to 3 years. Have your watch  
checked by an AUTHORIZED  
TEMPERATURES  
SEIKO DEALER or SERVICE CENTER to  
ensure that the case, buttons, gasket and  
crystal seal remain intact.  
taking a bath with a water resistant  
10, 15 or 20 bar watch, be sure to  
observe the following:  
* Do not operate the buttons when the watch  
is wet with soapy water or shampoo.  
* If the watch is left in warm water, a slight  
time loss or gain may be caused. This  
condition, however, will be corrected when  
the watch returns to normal temperature.  
Your watch works with stable  
accuracy within a temperature  
range of 5°C and 35°C (41°F  
and 95°F).  
CHEMICALS  
PRECAUTION REGARDING  
CASE BACK PROTECTIVE FILM  
Be careful not to expose the  
watch to solvents, mercury,  
cosmetic spray, detergents,  
Temperatures over 60°C (140°F) or below  
–10°C (+14°F) may cause a slight time loss  
or gain or battery leakage or shorten the  
battery life.  
If your watch has a protective  
film and/or a sticker on the case  
back, be sure to peel them off  
before using your watch.  
adhesives or paints. Otherwise,  
the case, bracelet, etc. may become  
discolored, deteriorated or damaged.  
However, the above conditions will be  
corrected when the watch returns to normal  
temperature.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
28  
29  
LIQUID CRYSTAL PANEL  
5
6
Analogue display system  
STATIC ELECTRICITY  
Time ............................................ Two hands (hour and minute)  
The IC (Integrated Circuit) used  
The normal life expectancy  
for a liquid crystal panel is  
approximately 7 years. After  
Digital display system  
in your watch will be affected by  
static electricity which may disturb  
the display. Keep the watch away  
TIME/CALENDAR mode.............. Hour, minute, second, date and day of the week  
PM indicator in the 12-hour display  
that it may decrease in con-  
STOPWATCH mode .................... Hour , minute, second, 1/1000 seconds and lap/  
split number  
from close contact with objects such as TV  
screens which emit strong static electricity.  
trast, becoming difficult to read. Please  
contact your AUTHORIZED SEIKO  
DEALER or SERVICE CENTER if you  
wish to have a new panel fitted (guaran-  
teed one year).  
MEMORY RECALL mode ........... Lap time / Split time (hour, minute, second and 1/  
1000 seconds) and lap/split number  
TIMER mode ............................... Countdown timer (hour and minute)  
ALARM mode.............................. Alarm time (hour and minute)  
PM indicator in the 12-hour display  
7
Digital display medium ...................... Nematic Liquid Crystal, FEM (Field Effect Mode)  
Battery............................................... SEIKO SR1130W, 1 piece  
Battery life ......................................... Approximately 3 years  
8
9
SPECIFICATIONS  
1
10 IC (Integrated Circuit) ........................ C-MOS-LSI, 1 piece  
Frequency of crystal oscillator........... 32,768 Hz (Hz = Hertz ... Cycles per second)  
2
Loss/gain (monthly rate) .................... Less than 15 seconds at normal temperature  
* The specifications may be subject to periodic changes without prior notice due to product  
improvements.  
range (5° C ~ 35° C) (41° F ~ 95° F)  
3
4
Operational temperature range ......... –5° C ~ +50° C (23° F ~ 122° F)  
Desirable temperature range of use . 0° C ~ +50° C (32° F ~ 122° F)  
Driving system .................................. Step motor  
Download from Www.Somanuals.com. All Manuals Search And Download.  
30  
31  

PYLE Audio TV Mount PSW117ET1 User Guide
Q See Car Video System QR40198 403 User Guide
RCA MP3 Player M3000 User Guide
Rotel Cassette Player RD1010 User Guide
Samson Stereo System C com 16 User Guide
Samsung Cell Phone C6625 User Guide
Samsung Film Camera Samsung SmartCam User Guide
Samsung Network Card SCH T300 User Guide
Samsung Vacuum Cleaner DJ68 00339U User Guide
Sanus Systems Indoor Furnishings PFV59S User Guide