OWNER'S MANUAL
L A W N R O L L E R
ROLLER MODEL:
PRC-241 BH
PRT-361 BH
PRT-361S BH
PRT-481S BH
Safety
Assembly
Operation
Repair Parts
Maintenance
Recommended for use with Riding Mowers,
Lawn or Garden Tractors, and ATV’s
*PRC-241 BH Push version not shown.
For the latest product updates and setup tips:
Important: This manual contains information for the safety of
persons and property. Read it carefully before assembly and
operation of the equipment!
Visit us on the web!
L-1681BH Rev. C
Download from Www.Somanuals.com. All Manuals Search And Download.
Parts Reference
Tools Required for Assembly:
1/2” Wrench (2)
3/4” Wrench (2) -PRC-241 BH Only
Slip Joint Pliers
Handle for PRC-241 BH only
Parts List
DESCRIPTION
REF. NO.
QTY.
PRC-241 BH
PRT-361 BH
PRT-481S BH
PRT-361S BH
Frame Extension Bar
Roller Drum Assembly
Scraper Bar
5/16" x 1", Carriage Bolt
5/16" x 1-1/2", Carriage Bolt
5/16" x 2-1/4", Carriage Bolt
5/8" Flat Washer
5/16" Nylon Lock Nut
Plug
Square Bearing
5/8" E-Ring
Frame Spacer
Hitch Pin
Hitch Pin Cotter
Handle
Hex Bolt 1/2” x 2-1/4
Hex Nut 1/2”
Lock Washer 1/2”
Grip
Clevis
1
2
3
4
5
6
7
8
2
1
1
4
2
2
4
8
1
2
2
1
1
1
1
1
1
1
2
2
B-3554-10
B-5121
B-6289-10
B-6271
B-6290-10
B-5789-B
B-6294-10
11M1016P
11M1024P
11M1036P
45M2121P
B-4786
B5121-PL
B-6270
F-577
R-1141
B-3861
B-5357-10
B-5353-B
B-6292-10
11M1016P
11M1024P
11M1036P
45M2121P
B-4786
B5121-PL
B-6270
F-577
R-1141
B-3861
B-6291-10
11M1016P
11M1024P
11M1036P
45M2121P
B-4786
B5121-PL
B-6270
F-577
R-1141
B-3861
D-146P
B-3556-10
1M1636P
30M1600P
40M1600P
B-2579
B-6272-10
11M1016P
11M1024P
11M1036P
45M2121P
B-4786
B5121-PL
B-6270
F-577
9
10
11
12
13
14
15
16
17
18
19
20
R-1141
B-3861
D-146P
D-146P
D-146P
R-892-10
R-892-10
R-892-10
R-892-10
3
L-1681BH Rev. C
Download from Www.Somanuals.com. All Manuals Search And Download.
Figure 1.
2
7
7
Assemble both sides
10
11
Square Bearing
Qty. 2
5/8" E-Ring
Qty. 2
5/8" Flat Washer
Qty. 4
Figure 2.
8
1
8
Assemble both sides
4
5/16" x 1" Carriage Bolt
Qty. 4
5/16" Nylon Lock Nut
Qty. 4
L-1681BH Rev. C
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Figure 3.
5
12
8
Do not tighten until
fig. 4 is complete
8
12
5
5/16" x 1-1/2" Carriage Bolt
Qty. 2
5/16" Nylon Lock Nut
Qty. 2
Frame Spacer
Qty. 1
Figure 4.
13
Hitch Pin
Qty. 1
8
14
6
Hitch Pin Cotter
Qty. 1
5/16" x 2-1/4" Carriage Bolt
Qty. 2
5/16" Nylon Lock Nut
Qty. 2
5
L-1681BH Rev. C
Download from Www.Somanuals.com. All Manuals Search And Download.
Figure 5.
NOTE: For PRC-241 Version Only!!
18
17
1/2" Lock Washer
Qty. 1
1/2" Hex Nut
Qty. 1
16
1/2" x 2-1/4 Hex Bolt
Qty. 1
!
OPERATION
!
MAINTENANCE
The key to years of trouble-free service is to keep your
Lawn Roller clean and dry.
CAUTION! Do not overload your Tractor/Rider. Roller
fully loaded with water weighs:
Occasionally check all moving parts for free movement
and, if necessary, lubricate with oil.
PRC-241 BH = 270 lbs.
PRT-361 BH = 690 lbs.
PRT-361S BH = 390 lbs.
PRT-481S BH = 485 lbs.
Should rust develop, sand lightly and then paint area with
enamel.
Refer to tractor manual to determine proper towing
capacity or your Tractor/Rider.
Periodically check all fasteners for tightness.
TRACTOR/RIDING MOWER SPEED
!
Fill the Roller with amount of water recommended for your
tractor/ rider. Screw in the plug (plug has pipe threads
and may not screw all the way in) and tighten securely.
Rollers yield the best results when ground conditions are
correct, and equipment is operated at less than 3 MPH.
To calibrate your tractor to 3 MPH.
For longest life, drain the Roller and leave the plug out
when not in use. Please note that sand may be used in
place of water with no risk of freezing.
Measure a distance of 20 feet on a flat level surface.
Adjust tractor throttle and select a gear to cover this
distance in 4.5 seconds.
Ground condition is vital to good leveling. Soil should be
moist, but not muddy.
Refer to your Tractor or Riding Mower Owner’s manual for
proper towing capacity and safe operation of your towing
equipment. Towing/Stopping distances will be greatly
affected by added weight of roller.
L-1681BH Rev. C
6
Download from Www.Somanuals.com. All Manuals Search And Download.
MANUFACTURER'S LIMITED WARRANTY FOR
Pull Behind Accessories
The limited warranty set forth below is given by Brinly-Hardy
Company with respect to new merchandise purchased and
used in the United States, its possessions and territories.
The provisions as set forth in this warranty provide
the sole and exclusive remedy arising from the sale.
Brinly-Hardy Co. shall not be liable for incidental or
consequential loss or damage including, without
limitation, expenses incurred for substitute or
replacement lawn care services or for rental expenses to
temporarily replace a warranted product.
Brinly-Hardy Company warrants the products listed below
against defects in material and workmanship, and will at
its option, repair or replace, free of charge, any part found
to be defective in materials or workmanship. This limited
warranty shall only apply if this product has been assembled, Some states do not allow the exclusion or limitation of
operated, and maintained in accordance with the Operator’s
manual furnished with the product, and has not been subject
to misuse, abuse, commercial use, neglect, accident,
improper maintenance, alteration, vandalism, theft, fire,
water, or damage because of other peril or natural disaster.
incidental or consequential damages, or limitations on how
long an implied warranty lasts, so the above exclusions or
limitations may not apply to you.
During the warranty period, the exclusive remedy is
replacement of the part. In no event shall recovery of any
kind be greater that the amount of the purchase price of the
product sold. Alteration of safety features of the product shall
void this warranty. You assume the risk and liability for loss,
damage, or injury to you and your property and/or to others
and their property arising out of the misuse or inability to use
this product.
Normal Wear Parts or components thereof are subject
to separate terms as follows: All normal wear parts or
component failures will be covered on the product for a
period of 90 days.
Parts found to be defective within the warranty period will
be replaced at our expense. Our obligation under this
warranty is expressly limited to the replacement or repair,
at our option, of parts found to be defective in material and
workmanship.
This limited warranty shall not extend to anyone other than
the original purchaser or to the person for whom it was
purchased as a gift.
HOW TO OBTAIN SERVICE: Warranty parts replacements
HOW STATE LAW RELATES TO THIS WARRANTY: This
are available, ONLY WITH PROOF OF PURCHASE, through limited warranty gives you specific legal rights, and you may
our Pull Behind Accessories Customer Service Department.
Call 877-728-8224.
also have other rights which vary from state to state.
IMPORTANT: The Warranty period stated below begins with
the PROOF OF PURCHASE. Without the proof of purchase,
the Warranty period begins from the date of manufacture
This limited warranty does not provide coverage in the
following cases:
•
•
Routine maintenance items such as lubricants and filters. determined by the serial number manufacturing date.
Normal deterioration of the exterior finish due to use or
exposure.
SPREADER WARRANTY PERIOD:
•
•
Transportation and/or labor charges.
The warranty does not include commercial and/or rental
use.
The warranty period is as follows: 2 Years.
No implied warranty, including any implied warranty
of merchantability of fitness for a particular purpose,
applies after the applicable period of express written
warranty above as to the part as identified below.
No other express warranty whether written or oral,
except as mentioned above, given by any person or
entity, including a dealer or retailer, with respect to
any product, shall bind Brinly-Hardy Co. During the
period of the warranty, the exclusive remedy is repair or
replacement of the product as set forth above.
7
L-1681BH Rev. C
Download from Www.Somanuals.com. All Manuals Search And Download.
|