Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparation for Setting Up
Live View button sticker
The "Quick Control button" on the rear case of
this product controls the [Live View shooting/
Movie shooting button] of the REBEL T1i / 500D
camera. Please place the provided Live View
button sticker on the "Quick Control button".
(Red)
Live View button sticker
Eliminate any old stains before placing the sticker on the product.
Place the Live View button sticker on the "Live View shooting/Movie
shooting button" when using the REBEL T2i / 550D camera.
<Supports REBEL T2i /
550D Cameras>
<Supports REBEL T1i /
500D Cameras>
Live View shooting/
Movie shooting button
Place sticker
Invalid
Quick Control button (
)
Place
sticker
E-12
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Attaching and Detaching the Port
In order to use this product underwater, the optional port for the camera
lens must be attached to this product.
CAUTION
Only the optional ports designed for SEA&SEA RDX-series housings can
be attached to this product.
This product is delivered with a housing body cap attached to the port mount.
Make sure to remove the housing body cap when attaching the port.
The housing body cap has no watertight capability.
When attaching the port to the housing, always refer to the instruction
manual provided.
Attaching the port
1
Release the port lock on the
RDX housing (front case) by
sliding it in the direction of
the arrow as shown in the
diagram, and rotate the port
mount ring toward OPEN (in a
counterclockwise direction)
until it stops
Slide
Port lock
2
Align the convex part of the
Port with the concave part of
the port mount ring, and fully
insert the port into the housing
Convex part
Convex part
Concave
part
Concave part
CAUTION
Before attaching the port, make sure there are no specks of dust, scratches,
or deformities on the O-ring and the O-ring contact surfaces.
E-14
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Mounting the Camera in the Housing
Pull the power switch and
focus/zoom dial out
5
Pop up the camera's built-in
6
flash. Align the camera tray
with the camera base inside the
front case, and slide the camera
forward into the front case
Make sure to pop up the built-in flash
of the camera before mounting the
camera in the housing. Once the
camera has been mounted, the flash
button of the camera cannot be used,
and the camera's built-in flash cannot
be popped up.
Make sure the camera tray is inserted
all the way into the camera base until
it stops.
Make sure that the camera tray is
properly placed and the knob is
locked.
Lever
Align the lever of the housing's
power switch and the camera's
power switch
7
Power switch
8
Place the rear case on the front
case, and close the buckles
See:
“Opening and Closing the Housing” (P. E-13)
Make sure that the O-ring is properly fitted in the O-ring groove before
setting of the rear case.
CAUTION
After the camera is mounted in the housing, make sure to check that all of
the housing's control parts work properly and the camera functions correctly.
E-17
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the Strobe
With the YS converter (option)
Connect the strobe with the YS converter (option) when the strobe is
triggered in conjunction with the camera.
CAUTION
Carefully observe the instruction manual for the YS converter before use.
A Grip-stay L (option) is required when using the YS converter.
Do not connect the strobe and the YS converter connector with a sync cord
(option) because this will damage the YS converter connector.
1
2
Remove the connector cap from the YS converter connector
Make sure there are no scratches
YS converter
or debris on the O-ring of the
connector
Connecting cable
connecting cable being connected
3
Align the round mark (or the notch
on the tip) of the connecting cable
with the round mark (or the convex
part inside) of the strobe bulkhead,
and then push it straight in
E-22
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
External Controls
Quick control button
It controls the Live View shooting / Movie shooting button of the EOS REBEL
T1i / EOS 500D camera.
Live View shooting / Movie shooting button
It is not be used with EOS REBEL T1i / EOS 500D camera.
Other controls
Other control parts on the housing correspond to the operation parts of the
digital camera. Refer to the camera's instruction manual for details of each
function.
CAUTION
After mounting the camera in the housing, make sure to check that all of
the housing's control parts work properly and the camera functions correctly
before underwater use.
E-26
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Compatible
camera
Canon EOS REBEL T1i / EOS 500D
Canon EOS REBEL T2i / EOS 550D
Power switch, Main dial, Shutter lever, Focus /
Zoom dial, Mode dial, AE lock / FE lock / Index /
Reduce button, AF point selection / Magnify button,
Live View shooting / Movie shooting button(* 1),
Aperture / Exposure compensation button, Quick
control button(* 2), WB selection button, AF mode
selection button, Setting button, Erase button,
Picture Style selection button, Playback button,
Drive mode selection button, MENU button,
Shooting settings display button
Controls
Body: Polycarbonate resin (Black)
60 m (200 feet)
Construction
Depth rating
Dimensions
Approx. 200 (W) × 190 (H) × 139.5 (D) mm
(14.2× 8.8 × 6.0 inches)
Approx. 2000 g (4.4 lbs.) (housing only)
Weight
・Release Rubber
・Live View button sticker
・Silicone grease
Accessories
・O-ring remover
・ Attachment tool
・Hand strap
・O-ring maintenance manual
・Instruction manual (this manual)
Mounted accessories to the product :
・Housing body cap
・Fiber-optic cable socket cap (x2)
・Converter connector cap
The specifications and appearance are subject to change without notice.
*1: It is not be used with EOS REBEL T1i / EOS 500D camera.
*2: It controls the Live View shooting / Movie shooting button of the EOS REBEL T1i /
EOS 500D camera.
E-30
Download from Www.Somanuals.com. All Manuals Search And Download.
|