SCEPTRE X32 HDTV User Manual
Dear Sceptre Customer,
Congratulations on your new SCEPTRE X32 High Definition LCD Television
purchase. Thank you for your support. To ensure safety and many years of
trouble free operation of your TV, please read the manual carefully before
making any adjustments, and keep them in a safe place for future reference. We
hope you enjoy your new SCEPTRE X32 High Definition LCD Television.
For technical assistance, please call 1800-788-2878 and select option 3 or
For all other inquiries, please call 1800-788-2878 and select option 4 or email
We recommend you register your SCEPTRE X32 HDTV with the enclosed
registration card and mail it in. For peace of mind and to protect your investment
beyond the standard warranty, SCEPTRE offers a two year extended warranty
service for your TV. This plan gives additional coverage once your standard
warranty period runs out. Please call our customer service group to purchase
the extended warranty.
- 1 -
www.SCEPTRE.com
Download from Www.Somanuals.com. All Manuals Search And Download.
SCEPTRE X32 HDTV User Manual
IMPORTANT INFORMATION
THIS PRODUCT HAS BEEN TESTED FOR COMPLIANCE WITH
REGULATORY SAFETY CERTIFICATIONS
This product is designed and manufactured to operate within defined design limits, and
misuse may result in electric shock or fire. To prevent the product from being damaged,
the following rules should be observed for the installation, use and maintenance of the
product. Read the following safety instructions before operating the display. Keep these
instructions in a safe place for future reference.
•
•
To avoid the risk of electric shock or component damage, switch off the power before
connecting other components to the X32 LCD TV.
Unplug the power cord before cleaning the X32 LCD TV. A damp cloth is sufficient for
cleaning the X32 LCD TV. Do not use a liquid or a spray cleaner for cleaning the
product. Do not use abrasive cleaners.
•
•
Always use the accessories recommended by the manufacturer to insure
compatibility.
When moving the X32 LCD TV from an area of low temperature to an area of high
temperature, condensation may form on the housing. Do not turn on the X32 LCD TV
immediately after this to avoid causing fire, electric shock or component damage.
Do not place the X32 LCD TV on an unstable cart, stand, or table. If the X32 LCD TV
falls, it can injure a person and cause serious damage to the appliance. Use only a
cart or stand recommended by the manufacturer or sold with the X32 LCD TV.
Any heat source should maintain a distance of at least 5 feet away from the X32 LCD
TV, i.e. radiator, heater, oven, amplifier etc. Do not install the product too close to
anything that produces smoke or moisture. Operating the product close to smoke or
moisture may cause fire or electric shock.
•
•
•
Slots and openings in the back and bottom of the cabinet are provided for ventilation.
To ensure reliable operation of the X32 LCD TV and to protect it from overheating, be
sure these openings are not blocked or covered. Do not place the X32 LCD TV in a
bookcase or cabinet unless proper ventilation is provided.
•
•
Never push any object into the ventilation slots of the X32 LCD TV. Do not place any
objects on the top of the Product. It could short circuit parts causing a fire or electric
shock. Never spill liquids on the X32 LCD TV.
The X32 LCD TV should be operated only from the type of power source indicated on
the label. If you are not sure of the type of power supplied to your home, consult your
dealer or local power company.
•
•
The power cable must be replaced when using different voltage from that specified in
the User Manual. For more information, contact your dealer.
The X32 LCD TV is equipped with a three-pronged grounded plug, a plug with a third
(grounding) pin. This plug will fit only into a grounded power outlet as a safety feature.
If your outlet does not accommodate the three-wire plug, have an electrician install
the correct outlet, or use an adapter to ground the appliance safely. Do not defeat the
- 3 -
www.SCEPTRE.com
Download from Www.Somanuals.com. All Manuals Search And Download.
SCEPTRE X32 HDTV User Manual
safety purpose of the grounded plug.
•
•
•
•
•
•
Do not overload power strips and extension cords. Overloading can result in fire or
electric shock.
The wall socket should be installed near the equipment and should be easily
accessible.
Only the marked power source can be used for the product. Any power source other
than the specified one may cause fire or electric shock.
Do not touch the power cord during thunderstorms. To avoid electric shock, avoid
handling the power cord during electrical storms.
Unplug the unit during a lightning storm or when it will not be used for a long period of
time. This will protect the X32 LCD TV from damage due to power surges.
Do not attempt to repair or service the product yourself. Opening or removing the
back cover may expose you to high voltages, the risk of electric shock, and other
hazards. If repair is required, please contact your dealer and refer all servicing to
qualified service personnel.
•
•
•
Keep the product away from moisture. Do not expose this appliance to rain or
moisture. If water penetrates into the product, unplug the power cord and contact your
dealer. Continuous use in this case may result in fire or electric shock.
Do not use the product if any abnormality occurs. If any smoke or odor becomes
apparent, unplug the power cord and contact your dealer immediately. Do not try to
repair the product yourself.
Avoid using dropped or damaged appliances. If the product is dropped and the
housing is damaged, the internal components may function abnormally. Unplug the
power cord immediately and contact your dealer for repair. Continued use of the
product may cause fire or electric shock.
•
•
Do not install the product in an area with heavy dust or high humidity. Operating the
product in environments with heavy dust or high humidity may cause fire or electric
shock.
Hold the power connector when removing the power cable. Pulling the power cable
itself may damage the wires inside the cable and cause fire or electric shocks. When
the product will not be used for an extended period of time, unplug the power
connector.
•
•
To avoid risk of electric shock, do not touch the connector with wet hands.
Insert batteries in accordance with instructions while using the remote control.
Incorrect polarities may cause damage and leakage of the batteries, operator injury
and contamination the remote control.
•
If any of the following occurs please contact the dealer:
o
o
o
o
o
The power connector fails or frays.
Liquid sprays or any object drops into the X32 LCD TV.
The Display is exposed to rain or other moisture.
The Display is dropped or damaged in any way.
The performance of the Display changes substantially.
•
Operating environment: Temperature: 5°C ~ 35°C, Humidity: 10% to 90% non-
condensing, Altitude: 0~10,000 ft.
- 4 -
www.SCEPTRE.com
Download from Www.Somanuals.com. All Manuals Search And Download.
SCEPTRE X32 HDTV User Manual
IMPORTANT INFORMATION
Television Antenna Connection Protection
External Television Antenna Grounding
If an outside antenna or cable system is to be connected to the LCD TV, make
sure that the antenna or cable system is electrically grounded to provide some
protection against voltage surges and static charges. Article 810 of the National
Electrical Code, ANSI/NFPSA 70, provides information with regard to proper
grounding of the mast and supporting structure, grounding of the lead-in wire to
an antenna discharge unit, size of the grounding conductors, location of antenna
discharge unit, connection to grounding electrodes, and requirements of the
grounding electrode.
Lightning Protection
For added protection of the LCD TV during a lightning storm or when it is left
unattended or unused for long periods of time, unplug the LCD TV from the wall
outlet and disconnect the antenna or cable system.
Power Lines
Do not locate the antenna near overhead light or power circuits, or where it could
fall into such power lines or circuits.
- 5 -
www.SCEPTRE.com
Download from Www.Somanuals.com. All Manuals Search And Download.
SCEPTRE X32 HDTV User Manual
Opening the Package
The SCEPTRE X32 is packaged in a carton. Any standard accessories are
packed separately in another carton. The weight of the LCD display is
approximately 33 lbs. Due to the size and weight of the product, it is suggested
that it must be handled by a minimum of 2 or more persons. Since the glass can
be easily scratched or broken, please handle the product gently. Never place the
unit on a surface with the glass facing downwards unless it is on protective
padding. When opening the carton, check that the product is in good condition
and that all standard accessories and items are included. Save the original box
and all packing materials for future shipping needs.
Package Contents
SCEPTRE X32GV-KOMODO TV Display x 1
TV Stand x 1
User Manual x 1
Power Cord x 1
Screwdriver x 1
Warranty / Registration Card x 1
X32 Remote Control (AAA Batteries included) x 1
Audio Cable (Red, and White Connectors) x 1
Component Cable (Green, Blue, and Red Connectors) x 1
Screws x 10 (For TV Stand Installation, 8 to install, 2 for spare)
- 6 -
www.SCEPTRE.com
Download from Www.Somanuals.com. All Manuals Search And Download.
SCEPTRE X32 HDTV User Manual
Installation
Please read the user manual carefully before performing the installation. The
power consumption of the display is approximately 170 watts. Please use the
power cord designated for the product. When an extension cord is required, use
one with the correct power rating. The cord must be grounded and the grounding
feature must not be defeated. The product should be installed on a flat surface to
avoid tipping. Space should be maintained between the back of the product and
the wall for proper ventilation. If you would like to mount the TV onto the wall,
please see page 13 for additional information. Avoid installing the product in the
kitchen, bathroom or other places with high humidity dust or smoke, so as not to
shorten the service life of the electronic components. Please ensure the product
is installed with the screen in landscape orientation. Any 90° clockwise or
counterclockwise installation may induce poor ventilation and successive
component damage.
Attaching the TV Stand
1. Please handle the TV with two or more people. Please locate a large flat
surface (i.e. table) and put a soft cloth (i.e. blanket) on the surface. Please
set the TV facing up on the flat surface so the panel does not get damaged.
- 7 -
www.SCEPTRE.com
Download from Www.Somanuals.com. All Manuals Search And Download.
SCEPTRE X32 HDTV User Manual
2. Please connect the stand to the TV and secure the connection with the screw
driver and the 8 screws included in the accessory box.
3. You can screw them in from the bottom of the stand. DO NOT over tighten
the screws when installing the stand; otherwise the stand’s threading will
become stripped. Please Note: To disassemble the TV stand, for wall
mounting purposes, please repeat the step 1, but unscrew the 8 screws to
remove the stand.
- 8 -
www.SCEPTRE.com
Download from Www.Somanuals.com. All Manuals Search And Download.
SCEPTRE X32 HDTV User Manual
Table of Contents
Television Antenna Connection Protection ................................... 5
Identifying Front and Rear Panel ....................................................... 11
Front View .......................................................................................... 11
Side Connection View...................................................................... 12
Side View Control Buttons............................................................... 12
Rear View Mounting Pattern........................................................... 13
Rear View Connections.................................................................... 14
SCEPTRE X32 Remote Control ........................................................... 16
Installing Batteries to the Remote ...................................................... 17
Which Port Should I Use ?.................................................................... 18
Knowing Your Cables........................................................................... 20
Switching Sources for Ports................................................................. 22
Connecting Your Antenna or Cable to TV ....................................... 23
If You Have Digital Cable without Cable Box or Antenna… .... 23
If You Have Cable or Antenna through VCR… ........................... 24
If You have Cable or Antenna…..................................................... 25
Connecting Your DVD Player to the TV ........................................... 26
If You Want the Best Connection with HDMI… ........................... 26
If You Want the Better Connection with Component…............. 27
If You Want the Good Connection with S-Video…..................... 28
If You Want the Fair Connection with Composite… .................. 29
Connecting Your Satellite or Cable Set-top box to the TV........... 30
If You Want the Best Connection with HDMI… ........................... 30
If You Want the Better Connection with Component…............. 31
If You Want the Good Connection with S-Video…..................... 32
If You Want the Fair Connection with Composite… .................. 33
Connecting an External Surround Sound Receiver ....................... 35
If You Want the Best Connection with Coaxial SPDIF (digital)…
............................................................................................................... 35
If You Want the Good Connection with RCA Audio (analog)…
............................................................................................................... 36
- 9 -
www.SCEPTRE.com
Download from Www.Somanuals.com. All Manuals Search And Download.
SCEPTRE X32 HDTV User Manual
Connecting a PC.................................................................................... 37
Ready to Watch Some TV?................................................................... 38
If You’ve Connected Antenna or Cable to the TV… .................. 38
OSD (On Screen Display) Controls ................................................... 40
Via Remote Control .......................................................................... 40
Via TV Side Panel Buttons................................................................ 41
OSD (On Screen Display) Options..................................................... 42
Channel Main Option ....................................................................... 43
Picture Main Option.......................................................................... 49
Function Main Option....................................................................... 66
Detailed Explanations .......................................................................... 86
Info Banner Explained...................................................................... 86
Aspect Ratio Explained.................................................................... 89
Closed Captioning (digital and analog) Explained................... 91
Rating Explained............................................................................... 92
Glossary .............................................................................................. 94
How do I clean the TV ?.................................................................... 95
Trouble Shooting................................................................................... 96
Call Us If You Need Help!.................................................................. 100
Specification......................................................................................... 101
LIMITED PRODUCT WARRANTY...................................................... 104
FCC Compliance Statement.............................................................. 107
- 10 -
www.SCEPTRE.com
Download from Www.Somanuals.com. All Manuals Search And Download.
SCEPTRE X32 HDTV User Manual
Identifying Front and Rear Panel
Front View
INDICATOR LIGHT – The light is red when power is plugged in but the TV is not
turned on. The light turns blue when the TV is turned on.
REMOTE SENSOR – The remote sensor receives all the commands from the
remote control.
- 11 -
www.SCEPTRE.com
Download from Www.Somanuals.com. All Manuals Search And Download.
SCEPTRE X32 HDTV User Manual
Side ConnectionView
COMPOSITE 2 – Connects to devices that use composite video cables such as
VCR or camcorder or video game consoles. The S-Video connector is
associated with AV2’s video. Please connect the video portion with either the
yellow connector or the S-Video connector. Do NOT connect both video
connectors.
Side View Control Buttons
- 12 -
www.SCEPTRE.com
Download from Www.Somanuals.com. All Manuals Search And Download.
SCEPTRE X32 HDTV User Manual
POWER – Turn on the TV by pressing the button once. Press the button again
to turn off the TV.
SOURCE – This button switches between all the different sources of the TV.
The switching sequence is as follows : TV (cable or air), AV1 (CVBS), AV1 (S-
Video), AV2 (CVBS), AV2 (S-Video), YPbPr1, YPbPr2, HDMI, and VGA. When
the OSD is active, this button acts as the enter button and confirms the menu
selection.
MENU – This button activates the On Screen Display (OSD). If a sub-menu is
active, pressing this button will return selection to the previous menu level.
CH(▲/▼) – These buttons change the TV channel up or down. If the OSD is
active, these buttons function as up or down controls for the menu.
VOL(+/-) – These buttons increase or decrease the TV’s volume. If a sub-menu
is active, pressing these buttons will move the selection left or right.
RearView Mounting Pattern
Mounting Specification : 200mm x 100mm using screw M6 (6mm) diameter
screws.
- 13 -
www.SCEPTRE.com
Download from Www.Somanuals.com. All Manuals Search And Download.
SCEPTRE X32 HDTV User Manual
RearView Connections
The following descriptions are for connections from left to right.
SERVICE – This port is for factory service by Sceptre’s technicians only.
LINE OUT - This connection port is used for sending out audio signals to other
audio devices such as stereo/surround sound receivers and sending out video
signals to other video device such as TV monitor or VCR. The red (R) and white
(L) connectors send out the audio signal. The yellow (AV OUT) connector sends
out the video signal. The orange (COAXIAL SPDIF OUT) connector sends out
either bit-stream or PCM digital sound signal to a home theater receiver with
digital input. This connection uses RCA audio cable for sound, composite cable
for video, and a coaxial cable for digital out. Please note : You can only use the
red/white connection or the orange one. Do NOT connect both.
HDMI – Connects to devices that use HDMI cable, such as Blu-ray or HD DVD
player, or HD cable / satellite set-top box. This connection port receives pure
digital audio and high definition signal through one single cable. This port also
can accept a HDCP video device for video.
VGA - This connection port connects to a PC for video using VGA cable. Be sure
to connect your audio cable to the VGA Stereo input if you want sound out of
VGA video source.
VGA STEREO INPUT - This connection port is for people who want to provide
audio to the TV when using a PC or a DVI video device. The sources uses
3.5mm mini-jack audio cable to provides audio for a HDCP enabled DVI video
device or PCs with VGA connection.
COMPONENT 1 & 2 (YPbPr with Audi L/R) – These connection ports are for
DVD players, or satellite / cable set-top boxes that use component cables. From
left to right, connect green, blue, and red for video, and then connect white for left
channel audio, and red for right channel audio.
- 14 -
www.SCEPTRE.com
Download from Www.Somanuals.com. All Manuals Search And Download.
SCEPTRE X32 HDTV User Manual
The following descriptions are for connections from left to right.
COMPOSITE 1 - Connects to devices that use composite video cables such as
VCR or camcorder or video game consoles. The S-Video connector is
associated with AV1’s video. Please connect the video portion with either the
yellow connector or the S-Video connector. Do NOT connect both video
connectors.
ATSC/NTSC – This connection is for digital or analog cable without the cable box
or over-the-airwave antennas. The tuner is a hybrid tuner that tunes to both
analog and digital channels. This connection uses coaxial RF cable. For over-
the airwave digital stations please check http://www.antennaweb.org.
AC IN - This connection is for providing power to the TV. This connection uses a
standard computer power cord.
- 15 -
www.SCEPTRE.com
Download from Www.Somanuals.com. All Manuals Search And Download.
SCEPTRE X32 HDTV User Manual
SCEPTRE X32 Remote Control
POWER – Turns the TV on or off.
MUTE – Mutes the TV’s audio.
0~9 – Sets the channels.
SOUND – Selects various preset
sound settings
Dash (-) – Inserts the dash for
selecting digital channels directly.
R – Returns to the previous channel.
GUIDE – Opens the current digital
channel information guide.
SOURCE – Cycles between
different inputs of the TV.
▲/▼/◄/►/↵ – Selects and moves
the item on screen. ▲/▼also
functions as channel up and down.
◄/► also functions as volume
increase and decrease. ↵ acts as
enter button for OSD menu and
changing channels in conjunction
with number buttons.
MENU – Opens / Exits the TV menu.
EXIT – Exits the TV menu.
SLEEP – Sets the Sleep timer.
ASPECT – Selects different screen
size.
ADD – Adds the current channel.
FREEZE – Freezes the TV picture.
CC – Cycles between different
closed captioning modes.
DELETE – Deletes the current
channel.
INFO – Shows the TV info.
MTS – Selects stereo, mono, or
second audio programming.
FAVORITE – Cycles the favorite
channels
PICTURE – Selects various preset
picture settings
- 16 -
www.SCEPTRE.com
Download from Www.Somanuals.com. All Manuals Search And Download.
SCEPTRE X32 HDTV User Manual
Installing Batteries to the Remote
Please insert two AAA batteries into the remote control. Make sure that you
match the (+) and (-) symbols on the batteries with the (+) and (-) symbols inside
the battery compartment. Afterwards, re-attach the battery cover.
Please note:
•
•
Only use AAA batteries.
Do not mix new and old batteries. This may result in cracking or leakage that
may pose a fire risk or lead to personal injury.
•
Inserting the batteries incorrectly may also result in cracking or leakage that
may pose a fire risk or lead to personal injury.
•
•
•
•
Dispose the batteries in accordance with local laws and regulations.
Keep the batteries away from children and pets.
If the remote control is not used for a long time, remove the batteries.
Keep the remote control away from moisture, sunlight, and high
temperatures.
- 17 -
www.SCEPTRE.com
Download from Www.Somanuals.com. All Manuals Search And Download.
SCEPTRE X32 HDTV User Manual
Which Port Should I Use ?
Port Quality
& Name
Cable Used
&
Devices that use
this Port
Port Picture
Resolution
Blu-ray DVD
Best
HDMI
(Digital HD
Capable)
HDMI
1080i, 720p,
480p, 480i
Player, HD-DVD
Player, High
Definition Cable or
Satellite Set-top
Box, HDCP devices
Best/Fair
ATSC/NTSC
(Digital HD
Capable)
Coaxial RF Antenna or Digital
Cable with out the
cable box
1080i, 720p,
480p, 480i
Best
VGA
(HD Capable)
VGA
1360x768 or
lower
PC or MAC with
VGA connection
Better
COMPONENT
1 & 2
DVD Player, Video
Component Game Console,
High Definition
Cable or Satellite
Set-top Box
1080i, 720p,
480p, 480i
(HD Capable)
Good
COMPOSITE
1 & 2
Non High Definition
Cable or Satellite
Set-top Box, S-
Video VCR
S-Video
480i only
(Non-HD)
Non High Definition
Cable or Satellite
Composite Set-top Box, VCR,
Fair
COMPOSITE
1 & 2
Old Game Console,
Camcorder
480i only
(Non-HD)
- 18 -
www.SCEPTRE.com
Download from Www.Somanuals.com. All Manuals Search And Download.
SCEPTRE X32 HDTV User Manual
What Port Should I Use ? (continued)
Port Quality,
Type & Name
Cable
Used &
Resolution
Devices
that use
this Port
Port Picture
Good
VGA STEREO
INPUT
HDCP
devices,
PC, MAC
3.5mm
mini-jack
(Audio)
Receiver
with Digital
Surround
Sound
Best
LINE OUT
(Digital Audio)
Coaxial
SPDIF
Decoding
Service
Port
This port is
for Sceptre
technicians
only.
Not Available
Any Stereo
or Better
RCA Audio Receiver,
Good
LINE OUT
(Audio)
VCR, or
DVR
Fair
Composite VCR, or
LINE OUT
(Non-HD)
DVR
480i only
- 19 -
www.SCEPTRE.com
Download from Www.Somanuals.com. All Manuals Search And Download.
SCEPTRE X32 HDTV User Manual
KnowingYour Cables
Cable Name
Cable Picture
HDMI
Coaxial RF
VGA
Component
S-Video
- 20 -
www.SCEPTRE.com
Download from Www.Somanuals.com. All Manuals Search And Download.
SCEPTRE X32 HDTV User Manual
Knowing Your Cables (continued)
Cable Name
Cable Picture
Composite
3.5 mm Mini-jack
RCA Audio
AC Power
Coaxial SPDIF
- 21 -
www.SCEPTRE.com
Download from Www.Somanuals.com. All Manuals Search And Download.
SCEPTRE X32 HDTV User Manual
Switching Sources for Ports
The X32 offers multiple ways of connecting your devices to the TV; the chart
below will help you understand which source you switch to for each of the ports.
Port Picture
Cable Used
Source Name to Switch to
HDMI or
HDMI
HDMI-DVI
COAXIAL RF
TV (CABLE / AIR)
VGA
VGA
COMPONENT
YPBPR1 or YPBPR2
S-VIDEO
AV1 (S-VIDEO) or
AV2 (S-VIDEO)
COMPOSITE
AV1 (CBVS) or
AV2 (CVBS)
- 22 -
www.SCEPTRE.com
Download from Www.Somanuals.com. All Manuals Search And Download.
SCEPTRE X32 HDTV User Manual
ConnectingYour Antenna or Cable to TV
IfYou Have Digital Cable without Cable Box or Antenna…
1. Make sure the power of X32 LCD HDTV is turned off.
2. Connect the Coaxial RF cable from your antenna or digital cable to
the ATSC/NTSC port off the back of your X32 LCD HDTV.
3. Turn on X32 LCD HDTV.
4. Select TV (Air) for antenna or TV (Cable) for digital cable from either
your remote control’s source button or source button on the right side
of the TV.
5. Use the On Screen Display to scan for channels.
Please Note :
•
•
Not all broadcasts are in High Definition (HD). Please refer to
your local broadcasting stations for more information.
The X32 LCD HDTV’s tuner is designed for HDTV therefore
requires a stronger signal than normal TVs. If you cannot
achieve that signal level with your antenna or cable, your X32
LCD HDTV might lose picture or sound.
- 23 -
www.SCEPTRE.com
Download from Www.Somanuals.com. All Manuals Search And Download.
SCEPTRE X32 HDTV User Manual
IfYou Have Cable or Antenna throughVCR…
1. Make sure the power of X32 LCD HDTV is turned off.
2. Make sure there is an antenna or cable connection to the VCR
already.
3. Use a Coaxial RF cable and connect from your VCR’s Antenna Out
or Output to TV to the ATSC/NTSC port off the back of your X32
LCD HDTV.
4. Turn on X32 LCD HDTV.
5. Select TV (Air) for antenna or TV (Cable) for digital cable from either
your remote control’s source button or source button on the right side
of the TV.
6. Use the On Screen Display to scan for channels.
Please Note :
•
Some VCRs require you to turn it on before its output will
have a signal to the TV. Please consult your VCR manual
for further reference.
•
•
Not all broadcasts are in High Definition (HD). Please refer
to your local broadcasting stations for more information.
The X32 LCD HDTV’s tuner is designed for HDTV therefore
requires a stronger signal than normal TVs. If you cannot
achieve that signal level with your antenna or cable, your
X32 LCD HDTV might lose picture or sound.
- 24 -
www.SCEPTRE.com
Download from Www.Somanuals.com. All Manuals Search And Download.
SCEPTRE X32 HDTV User Manual
IfYou have Cable or Antenna…
1. Make sure the power of X32 LCD HDTV is turned off.
2. Connect the Coaxial RF cable from your antenna or cable to the
ATSC/NTSC port off the back of your X32 LCD HDTV.
3. Turn on the X32 LCD HDTV.
4. Select TV (Air) for antenna or TV (Cable) for cable from either your
remote control’s source button or source button on the right side of
the TV.
5. Use the On Screen Display to scan for channels.
Please Note :
•
•
Not all broadcasts are in High Definition (HD). Please refer to
your local broadcasting stations for more information.
The X32 LCD HDTV’s tuner is designed for HDTV therefore
requires a stronger signal than normal TVs. If you cannot
achieve that signal level with your antenna or cable, your X32
LCD HDTV might lose picture or sound.
- 25 -
www.SCEPTRE.com
Download from Www.Somanuals.com. All Manuals Search And Download.
SCEPTRE X32 HDTV User Manual
ConnectingYour DVD Player to the TV
IfYouWant the Best Connection with HDMI…
1. Make sure the power of X32 LCD HDTV and your DVD player is turned
off.
2. Connect a HDMI cable to the HDMI port of your DVD player and the
other end to the HDMI port off the back of your X32 LCD HDTV.
3. Turn on the X32 LCD HDTV and your DVD player.
4. Use the remote control’s source button or the source button on the right
side of the TV to switch to HDMI.
Please Note :
•
Please reference the DVD player’s manual as well, to make sure
the DVD player is configured to output correctly to the TV.
- 26 -
www.SCEPTRE.com
Download from Www.Somanuals.com. All Manuals Search And Download.
SCEPTRE X32 HDTV User Manual
IfYou Want the Better Connection with Component…
1. Make sure the power of X32 LCD HDTV and your DVD player is turned
off.
2. Obtain a Component Cable. Connect the green color connector to both
your DVD player and Component 1’s green connector port off the back of
your X32 LCD HDTV.
3. Connect the blue color connector to both your DVD player and
Component 1’s blue connector port off the back of your X32 LCD HDTV.
4. Connect the red color connector to both your DVD player and
Component 1’s red connector port off the back of your X32 LCD HDTV.
5. Obtain a RCA Audio Cable. Connect the white color connector to both
your DVD player and Component 1’s white connector port off the back of
your X32 LCD HDTV to the right side of your green, blue, red component
connection.
6. Connect the red color connector to both your DVD player and
Component 1’s red connector port off the back of your X32 LCD HDTV to
the right side of your green, blue, red component connection.
7. Turn on the X32 LCD HDTV and your DVD player.
8. Use the remote control’s source button or the source button on the right
side of the TV to switch to YPbPr1.
Please Note :
•
•
If Component 1 is already occupied, please use Component 2 as
your connection port and switch to source YPbPr2.
Please reference the DVD player’s manual as well, to make sure
the DVD player is configured to output correctly to the TV.
- 27 -
www.SCEPTRE.com
Download from Www.Somanuals.com. All Manuals Search And Download.
SCEPTRE X32 HDTV User Manual
IfYouWant the Good Connection with S-Video…
1. Make sure the power of X32 LCD HDTV and your DVD player is turned
off.
2. Obtain an S-Video Cable. Connect the S-Video connector to both your
DVD player and Composite 1’s S-Video connector port off the back of
your X32 LCD HDTV.
3. Obtain a RCA Audio Cable. Connect the white color connector to both
your DVD player and Composite 1’s white connector port off the back of
your X32 LCD HDTV.
4. Connect the red color connector to both your DVD player and Composite
1’s red connector port off the back of your X32 LCD HDTV.
5. Turn on the X32 LCD HDTV and your DVD player.
6. Use the remote control’s source button or the source button on the right
side of the TV to switch to AV1 (S-Video).
Please Note :
•
•
If Composite 1 is already occupied, please use Composite 2 as
your connection port and switch source to AV2 (S-Video).
Make sure the yellow connector in the same group is not
connected. You can only connect either the S-Video port or the
Yellow Video connector port. DO NOT CONNECT BOTH.
Please reference the DVD player’s manual as well, to make sure
the DVD player is configured to output correctly to the TV.
•
- 28 -
www.SCEPTRE.com
Download from Www.Somanuals.com. All Manuals Search And Download.
SCEPTRE X32 HDTV User Manual
IfYouWant the Fair Connection with Composite…
1. Make sure the power of X32 LCD HDTV and your DVD player is turned
off.
2. Obtain a Yellow Video Cable. Connect the Yellow Video connector to
both your DVD player and Composite 1’s Yellow Video connector port off
the back of your X32 LCD HDTV.
3. Obtain a RCA Audio Cable. Connect the white color connector to both
your DVD player and Composite 1’s white connector port off the back of
your X32 LCD HDTV.
4. Connect the red color connector to both your DVD player and Composite
1’s red connector port off the back of your X32 LCD HDTV.
5. Turn on the X32 LCD HDTV and your DVD player.
6. Use the remote control’s source button or the source button on the right
side of the TV to switch to AV1 (CVBS).
Please Note :
•
•
If Composite 1 is already occupied, please use Composite 2 as
your connection port and switch source to AV2 (CVBS).
Make sure the yellow connector in the same group is not
connected. You can only connect either the S-Video port or the
Yellow Connector port. DO NOT CONNECT BOTH.
•
Please reference the DVD player’s manual as well, to make sure
the DVD player is configured to output correctly to the TV.
- 29 -
www.SCEPTRE.com
Download from Www.Somanuals.com. All Manuals Search And Download.
SCEPTRE X32 HDTV User Manual
ConnectingYour Satellite or Cable Set-
top box to the TV
IfYouWant the Best Connection with HDMI…
1. Make sure the power of X32 LCD HDTV and your set-top box is turned
off.
2. Connect a HDMI cable to the HDMI output of your set-top box and the
other end to the HDMI port off the back of your X32 LCD HDTV.
3. Turn on the X32 LCD HDTV and your set-top box.
4. Use the remote control’s source button or the source button on the right
side of the TV to switch to HDMI.
Please Note :
•
•
Please reference the set-top box’s manual, to make sure the set-
top box is configured to output correctly to the TV.
Sceptre’s X32 LCD HDTV supports SONY’s universal remote
code. Please look up SONY’s codes in your universal
remote’s hand book.
- 30 -
www.SCEPTRE.com
Download from Www.Somanuals.com. All Manuals Search And Download.
SCEPTRE X32 HDTV User Manual
IfYou Want the Better Connection with Component…
1. Make sure the power of X32 LCD HDTV and your set-top box is turned
off.
2. Obtain a Component Cable. Connect the green color connector to both
your set-top box and Component 1’s green connector port off the back of
your X32 LCD HDTV.
3. Connect the blue color connector to both your set-top box and
Component 1’s blue connector port off the back of your X32 LCD HDTV.
4. Connect the red color connector to both your set-top box and
Component 1’s red connector port off the back of your X32 LCD HDTV.
5. Obtain a RCA Audio Cable. Connect the white color connector to both
your set-top box and Component 1’s white connector port off the back of
your X32 LCD HDTV to the right side of your green, blue, red component
connection.
6. Connect the red color connector to both your set-top box and
Component 1’s red connector port off the back of your X32 LCD HDTV to
the right side of your green, blue, red component connection.
7. Turn on the X32 LCD HDTV and your set-top box.
8. Use the remote control’s source button or the source button on the right
side of the TV to switch to YPbPr1.
Please Note :
•
If Component 1 is already occupied, please use Component 2 as
your connection port and switch to source YPbPr2.
- 31 -
www.SCEPTRE.com
Download from Www.Somanuals.com. All Manuals Search And Download.
SCEPTRE X32 HDTV User Manual
•
•
Please reference the set-top box’s manual as well, to make sure
the set-top box is configured to output correctly to the TV.
Sceptre’s X32 LCD HDTV supports SONY’s universal remote
code. Please look up SONY’s codes in your universal
remote’s hand book.
IfYouWant the Good Connection with S-Video…
1. Make sure the power of X32 LCD HDTV and your set-top box is
turned off.
2. Obtain an S-Video Cable. Connect the S-Video connector to both
your set-top box and Composite 1’s S-Video connector port off the
back of your X32 LCD HDTV.
3. Obtain a RCA Audio Cable. Connect the white color connector to
both your set-top box and Composite 1’s white connector port off the
back of your X32 LCD HDTV.
4. Connect the red color connector to both your set-top box and
Composite 1’s red connector port off the back of your X32 LCD
HDTV.
5. Turn on the X32 LCD HDTV and your set-top box.
6. Use the remote control’s source button or the source button on the
right side of the TV to switch to AV1 (S-Video).
- 32 -
www.SCEPTRE.com
Download from Www.Somanuals.com. All Manuals Search And Download.
SCEPTRE X32 HDTV User Manual
Please Note :
•
•
If Composite 1 is already occupied, please use Composite 2 as
your connection port and switch source to AV2 (S-Video).
Make sure the yellow connector in the same group is not
connected. You can only connect either the S-Video port or the
Yellow Video connector port. DO NOT CONNECT BOTH.
Please reference the set-top box’s manual as well, to make sure
the set-top box is configured to output correctly to the TV.
Sceptre’s X32 LCD HDTV supports SONY’s universal remote
code. Please look up SONY’s codes in your universal
remote’s hand book.
•
•
IfYouWant the Fair Connection with Composite…
1. Make sure the power of X32 LCD HDTV and your set-top box is
turned off.
2. Obtain a Yellow Video Cable. Connect the Yellow Video connector to
both your set-top box and Composite 1’s Yellow Video connector
port off the back of your X32 LCD HDTV.
3. Obtain a RCA Audio Cable. Connect the white color connector to
both your set-top box and Composite 1’s white connector port off the
back of your X32 LCD HDTV.
- 33 -
www.SCEPTRE.com
Download from Www.Somanuals.com. All Manuals Search And Download.
SCEPTRE X32 HDTV User Manual
4. Connect the red color connector to both your set-top box and
Composite 1’s red connector port off the back of your X32 LCD
HDTV.
5. Turn on the X32 LCD HDTV and your set-top box.
6. Use the remote control’s source button or the source button on the
right side of the TV to switch to AV1 (CVBS).
Please Note :
•
•
If Composite 1 is already occupied, please use Composite 2 as
your connection port and switch source to AV2 (CVBS).
Make sure the yellow connector in the same group is not
connected. You can only connect either the S-Video port or the
Yellow Connector port. DO NOT CONNECT BOTH.
Please reference the set-top box’s manual as well, to make sure
the set-top box is configured to output correctly to the TV.
Sceptre’s X32 LCD HDTV supports SONY’s universal remote
code. Please look up SONY’s codes in your universal
remote’s hand book.
•
•
- 34 -
www.SCEPTRE.com
Download from Www.Somanuals.com. All Manuals Search And Download.
SCEPTRE X32 HDTV User Manual
Connecting an External Surround Sound
Receiver
IfYou Want the Best Connection with Coaxial SPDIF
(digital)…
1. Make sure the power of X32 LCD HDTV and your receiver is turned
off.
2. Obtain a Coaxial SPDIF cable, connect it to your receiver’s coaxial
SPDIF digital input and the Coaxial SPDIF connection on the LINE
OUT port off the back of the X32 LCD HDTV.
3. Turn on the X32 LCD HDTV and your receiver.
Please Note :
•
If you want pure digital stream for your receiver to decode,
you must also configure the TV’s OSD Sound->Digital Audio
Out function. Make sure the option is on Bit Stream.
If your receiver is making static noises when receiving Bit
Stream, you must use the PCM option instead.
Please reference the receiver’s manual as well, to make
sure the receiver is configured to receive signals correctly
from the TV.
•
•
- 35 -
www.SCEPTRE.com
Download from Www.Somanuals.com. All Manuals Search And Download.
SCEPTRE X32 HDTV User Manual
IfYouWant the Good Connection with RCA Audio (analog)…
1. Make sure the power of X32 LCD HDTV and your receiver is turned
off.
2. Obtain a RCA Audio cable, connect it to your receiver’s RCA audio
analog input and the RCA Audio connection on the LINE OUT port
off the back of the X32 LCD HDTV.
3. Turn on the X32 LCD HDTV and your receiver.
Please Note :
•
Please reference the receiver’s manual as well, to make
sure the receiver is configured to receive signals correctly
from the TV.
- 36 -
www.SCEPTRE.com
Download from Www.Somanuals.com. All Manuals Search And Download.
SCEPTRE X32 HDTV User Manual
Connecting a PC
1. Make sure the power of X32 LCD HDTV and your PC is turned off.
2. Obtain a 15-pin D-Sub VGA cable, connect to the VGA output of
your PC and the other end to the VGA port off the back of your X32
LCD HDTV.
3. Obtain a 3.5 mm Mini-jack, connect to the audio out of your PC and
the other end to the VGA Stereo Input port.
4. Turn on the power of the X32 LCD HDTV and your PC.
5. Use the remote control’s source button or the source button on the
right side of the TV to switch to VGA.
Please Note :
•
For the best picture, please set your PC resolution to
1360x768 at 60 Hz. Please refer to the PC or graphic card’s
manual for further instructions on how to set your resolution
and refresh rate.
•
Please refer to your PC manual for video output
requirements of the video card.
- 37 -
www.SCEPTRE.com
Download from Www.Somanuals.com. All Manuals Search And Download.
SCEPTRE X32 HDTV User Manual
Ready to Watch Some TV?
Starting up the X32 LCD HDTV
1. Make sure your power cable is connected and the standby red light in
the front of the TV is lit up.
2. Check all your connection cables off the side or the back of your TV and
also your AV devices. Make sure they are all connected securely.
3. Turn on your TV and other AV devices if necessary.
4. Select the correct source according to the Connecting pages.
IfYou’ve Connected Antenna or Cable to the TV…
If an antenna or cable is connected to your TV’s ATSC/NTSC port, you will need
to use the source button on the remote control or the source button on the right
side of the TV to switch to TV (Cable / Air) and auto-scan for channels.
1. Open up the OSD by pressing the MENU button on the remote control.
2. Make sure CHANNEL main option is highlighted in yellow; if not please
use the ▲ or ▼ buttons to select CHANNEL then press the ► direction
button to switch to TUNER MODE function.
- 38 -
www.SCEPTRE.com
Download from Www.Somanuals.com. All Manuals Search And Download.
SCEPTRE X32 HDTV User Manual
3. Press the ↵ button to go into TUNER MODE function.
4. Press the ▲ or ▼ buttons to select the options AIR or CABLE.
5. If you have an antenna connected to the X32 LCD HDTV, please select
AIR as your option by pressing the ↵ button.
6. If you have cable connected to your X32 LCD HDTV, please select
CABLE as your option by pressing the ↵ button. An additional option
will pop up. Please use the ▲ or ▼ buttons to select AUTO as your
cable option and press ↵ to confirm the selection.
7. Once you have made the selection, the OSD will return you back to
CHANNEL main options. Press the ▼ button to highlight the AUTO
SCAN function and press ↵ twice to start scanning for channels.
8. Once the scanning is done, you can watch the TV.
Please Note :
•
Not all broadcasts are in High Definition (HD). Please refer to
your local broadcasting stations for more information.
The X32 LCD HDTV’s tuner is designed for HDTV therefore
requires a stronger signal than normal TVs. If you cannot
achieve that signal level with your antenna or cable, your X32
LCD HDTV might lose picture or sound.
•
- 39 -
www.SCEPTRE.com
Download from Www.Somanuals.com. All Manuals Search And Download.
SCEPTRE X32 HDTV User Manual
OSD (On Screen Display) Controls
Via Remote Control
In order to adjust most of the options inside the OSD (On Screen Display), the
picture below shows all the buttons used on the remote control.
▲ – This button changes the channel to a higher number and also functions as
up direction in the OSD.
▼ – This button changes the channel to a lower number and also functions as
down direction in the OSD.
◄ – This button decreases the volume and also functions as left direction in the
OSD.
► – This button increases the volume and also functions as right direction in the
OSD.
↵ – This button changes the channel in conjunction with the number pad and
also functions as enter for selecting options in the OSD.
– This button opens the OSD and also exits the OSD by going to the
previous level of the OSD.
– This button exits the OSD entirely.
- 40 -
www.SCEPTRE.com
Download from Www.Somanuals.com. All Manuals Search And Download.
SCEPTRE X32 HDTV User Manual
Via TV Side Panel Buttons
In order to provide more than one type of OSD control buttons, the side panel’s
buttons have also been made functional for adjusting the OSD.
MENU – This button opens the OSD.
CH(▲) – This button changes the channel to a higher number and also functions
as up direction in the OSD.
CH(▼) – This button changes the channel to a lower number and also functions
as down direction in the OSD.
VOL(+) – This button decreases the volume and functions as left direction in the
OSD.
VOL(-) – This button decreases the volume and functions as right direction in the
OSD.
- 41 -
www.SCEPTRE.com
Download from Www.Somanuals.com. All Manuals Search And Download.
SCEPTRE X32 HDTV User Manual
OSD (On Screen Display) Options
CHANNEL – This main option has
functions for the ATSC/NTSC port,
such as scanning channels, editing
channels, checking signal
strength….etc.
PICTURE – This main option has
functions for changing the picture
settings for all ports, such as tint,
contrast, sharpness, and dynamic
noise reduction.
SOUND – This main option has
functions for changing sound
settings for all ports, such as digital
audio out, treble, bass….etc.
FUNCTION – This main option has
functions for only composite and
ATSC/NTSC port. Some of the
functions are closed captioning and
channel blocking for parents.
SETUP – This main option has
functions for all ports, such as
power on / off time, sleep, menu
language, menu opacity, emergency
alert for emergency broadcasting
system.
- 42 -
www.SCEPTRE.com
Download from Www.Somanuals.com. All Manuals Search And Download.
SCEPTRE X32 HDTV User Manual
Channel Main Option
This option chooses various antenna and cable functions. Extra functions
include signal strength for digital signals and changing input via External Input
function.
TUNER MODE – This function allows users to choose what connection the TV is
accepting.
1. Press MENU to open the OSD and highlight CHANNEL.
2. Press ↵ or ► to move to the functions and highlight TUNER MODE.
3. Once in TUNER MODE, press ► again to select either AIR or CABLE.
4. Use ▲ or ▼ to select which connection you have then press ↵ to finalize
the selection.
Please Note :
•
If you are choosing cable, the default scanning mode is AUTO.
Unless you know what cable system your cable company uses,
please leave the tuner mode at AUTO.
- 43 -
www.SCEPTRE.com
Download from Www.Somanuals.com. All Manuals Search And Download.
SCEPTRE X32 HDTV User Manual
AUTO SCAN – This function scans all the channels available from the
ATSC/NTSC port.
1. Press MENU to open the OSD and highlight CHANNEL.
2. Press ↵ or ► to move to the functions and highlight TUNER MODE.
3. Once in TUNER MODE, press ▼ to select AUTO SCAN.
4. Press ↵ twice to enter and begin scanning for channels.
Please Note :
•
•
Not all broadcasts are in High Definition (HD). Please refer to
your local broadcasting stations for more information.
The X32 LCD HDTV’s tuner is designed for HDTV therefore
requires a stronger signal than normal TVs. If you cannot
achieve that signal level with your antenna or cable, your X32
LCD HDTV might lose picture or sound.
- 44 -
www.SCEPTRE.com
Download from Www.Somanuals.com. All Manuals Search And Download.
SCEPTRE X32 HDTV User Manual
CHANNEL EDIT – This function allows users to add, delete, or add to favorites,
the TV’s scanned in channels.
1. Press MENU to open the OSD and highlight CHANNEL.
2. Press ↵ or ► to move to the functions and highlight TUNER MODE.
3. Once in TUNER MODE, press ▼ repeatedly to select CHANNEL EDIT.
4. Press ↵ twice to enter start editing the scanned in channels.
- 45 -
www.SCEPTRE.com
Download from Www.Somanuals.com. All Manuals Search And Download.
SCEPTRE X32 HDTV User Manual
5. You will be able to edit the channels by either deleting the channel or
adding the channel to the favorites list.
a. You can delete the channel by removing the 9 from the ADD
column.
i. Match the channel you want to remove with the ▲▼◄►
buttons in the ADD column then press ↵. If you do this,
you will not be able to browse that channel until you go
back into channel edit and add the 9 back.
ii. Press the MENU button to save and exit.
b. You can add the channel to your favorite list by adding a
the FAV. column.
♥
in
i. Match the channel you want to add to favorites with the
▲▼◄► buttons in the FAV. column then press ↵. If
you do this, the channel will be part of the sequential
cycling list of the FAVORITE button on the remote
control, until you go back into channel edit and remove
the
♥
.
ii. Press the MENU button to save and exit.
- 46 -
www.SCEPTRE.com
Download from Www.Somanuals.com. All Manuals Search And Download.
SCEPTRE X32 HDTV User Manual
SIGNAL STRENGTH – This function allows users to view their digital channel’s
signal strength.
1. Press MENU to open the OSD and highlight CHANNEL.
2. Press ↵ or ► to move to the functions and highlight TUNER MODE.
3. Once in TUNER MODE, press ▼ repeatedly to select SIGNAL
STRENGTH.
Please Note :
•
•
This function is only available if you are on a digital channel.
This function will not work under analog channels.
When using this function, the OSD menu will not auto exit.
- 47 -
www.SCEPTRE.com
Download from Www.Somanuals.com. All Manuals Search And Download.
SCEPTRE X32 HDTV User Manual
EXTERNAL INPUT – This function allows users to change the current source to
another.
1. Press MENU to open the OSD and highlight CHANNEL.
2. Press ↵ or ► to move to the functions and highlight TUNER MODE.
3. Once in TUNER MODE, press ▼ repeatedly to select EXTERNAL
INPUT.
4. Press ↵ to select the function and use ◄ or ► to change the source of
your choice and press ↵ to finalize your selection.
- 48 -
www.SCEPTRE.com
Download from Www.Somanuals.com. All Manuals Search And Download.
SCEPTRE X32 HDTV User Manual
Picture Main Option
This option allows users to adjust the TV’s picture sharpness, color, tint, and
other various functions.
PICTURE MODE – This function allows you to select the various picture modes
of the TV from custom, standard, mild, to vivid.
1. Press MENU to open the OSD and highlight PICTURE by pressing the
▼ button.
2. Press ↵ or ► to move to the functions and highlight PICTURE MODE.
3. Press ↵ or ► to select PICTURE MODE function.
4. Use ▲ or ▼ to select which picture mode you want.
5. Press ↵ to confirm your selection.
Please Note :
•
CUSTOM allows you to adjust all the settings to your personal
preference.
•
•
•
•
STANDARD is for watching regular TV.
MILD is for watching movies.
VIVID is for watching sports and HDTV programming.
RECALL is not a picture mode but a function to restore any
changes under CUSTOM picture mode back to its original
factory settings.
- 49 -
www.SCEPTRE.com
Download from Www.Somanuals.com. All Manuals Search And Download.
SCEPTRE X32 HDTV User Manual
BRIGHTNESS – This function adjusts the black level in a picture.
1. Press MENU to open the OSD and highlight PICTURE by pressing the
▼ button.
2. Press ↵ or ► to move to the functions and highlight PICTURE MODE.
3. Press ▼ to select BRIGHTNESS function and press ↵.
4. Use ◄ or ► to adjust the brightness level.
Please Note :
•
This function can be reset back to default via the RECALL
subfunction under PICTURE MODE.
•
If the brightness is too high, the picture will look washed out,
if the brightness is too low the picture will not have much
detail in dark spots of the picture.
- 50 -
www.SCEPTRE.com
Download from Www.Somanuals.com. All Manuals Search And Download.
SCEPTRE X32 HDTV User Manual
SATURATION – This function adjusts how strong your picture’s colors are going
to be.
1. Press MENU to open the OSD and highlight PICTURE by pressing the
▼ button.
2. Press ↵ or ► to move to the functions and highlight PICTURE MODE.
3. Press ▼ repeatedly to select SATURATION function and press ↵.
4. Use ◄ or ► to adjust the saturation level.
Please Note :
•
This function can be reset back to default via the RECALL
subfunction under PICTURE MODE.
- 51 -
www.SCEPTRE.com
Download from Www.Somanuals.com. All Manuals Search And Download.
SCEPTRE X32 HDTV User Manual
CONTRAST – This function adjusts the white levels in a picture.
1. Press MENU to open the OSD and highlight PICTURE by pressing the
▼ button.
2. Press ↵ or ► to move to the functions and highlight PICTURE MODE.
3. Press ▼ repeatedly to select CONTRAST function and press ↵.
4. Use ◄ or ► to adjust the contrast level.
Please Note :
•
This function can be reset back to default via the RECALL
subfunction under PICTURE MODE.
•
If the contrast is too high, the picture will not have any details
in bright parts of the picture. If the contrast is too low, the
picture will look washed out.
- 52 -
www.SCEPTRE.com
Download from Www.Somanuals.com. All Manuals Search And Download.
SCEPTRE X32 HDTV User Manual
SHARPNESS – This function adjusts how sharp objects in your pictures are.
1. Press MENU to open the OSD and highlight PICTURE by pressing the
▼ button.
2. Press ↵ or ► to move to the functions and highlight PICTURE MODE.
3. Press ▼ repeatedly to select SHARPNESS function and press ↵.
4. Use ◄ or ► to adjust the sharpness level.
Please Note :
•
This function can be reset back to the default via the
RECALL subfunction under PICTURE MODE.
If the sharpness is adjusted too high, the picture will look
overly pixilated. If the sharpness is adjusted too low, the
picture will look blurry.
•
- 53 -
www.SCEPTRE.com
Download from Www.Somanuals.com. All Manuals Search And Download.
SCEPTRE X32 HDTV User Manual
TINT – This function adjusts your picture’s overall color with everything looking
green on one end and everything looking red on the other.
1. Press MENU to open the OSD and highlight PICTURE by pressing the
▼ button.
2. Press ↵ or ► to move to the functions and highlight PICTURE MODE.
3. Press ▼ repeatedly to select TINT function and press ↵.
4. Use ◄ or ► to adjust the tint level.
Please Note :
•
This function can be reset back to the default via the
RECALL subfunction under PICTURE MODE.
- 54 -
www.SCEPTRE.com
Download from Www.Somanuals.com. All Manuals Search And Download.
SCEPTRE X32 HDTV User Manual
RGB (RED, GREEN, BLUE) – This function adjusts the white color’s overall
balance of white colors in a picture. Each color, red, green, and blue will fine
tune the overall white color’s balance in small increments..
1. Press MENU to open the OSD and highlight PICTURE by pressing the
▼ button.
2. Press ↵ or ► to move to the functions and highlight PICTURE MODE.
3. Press ▼ repeatedly to select RGB function and press ↵.
4. Use ◄ or ► to adjust the RGB’s 3 color levels level.
5. Use ▲ or ▼ to select the 3 colors; red, green, and blue.
Please Note :
•
This function can be reset back to the default via the
RECALL subfunction under PICTURE MODE.
- 55 -
www.SCEPTRE.com
Download from Www.Somanuals.com. All Manuals Search And Download.
SCEPTRE X32 HDTV User Manual
COLOR TEMP. – This function adjusts the white color’s overall balance of white
colors in a picture. The function changes the white color’s overall balance in
large increments.
1. Press MENU to open the OSD and highlight PICTURE by pressing the
▼ button.
2. Press ↵ or ► to move to the functions and highlight PICTURE MODE.
3. Press ▼ repeatedly to select COLOR TEMP. function and press ↵.
4. Use ◄ or ► to adjust the color temperature level.
5. Press ↵ to finalize your selection.
Please Note :
•
•
•
•
This function can be reset back to the default via the
RECALL subfunction under PICTURE MODE.
COOL – This option will produce a picture with overall bluish
color.
NORMAL – This option will produce a picture with normal
white color.
WARM – This option will produce a picture with overall
reddish color.
- 56 -
www.SCEPTRE.com
Download from Www.Somanuals.com. All Manuals Search And Download.
SCEPTRE X32 HDTV User Manual
DNR (DIGITAL NOISE REDUCTION) – This function reduces the amount of
pixilation under analog TV channels. This function works for analog TV channels
only.
1. Press MENU to open the OSD and highlight PICTURE by pressing the
▼ button.
2. Press ↵ or ► to move to the functions and highlight PICTURE MODE.
3. Press ▼ repeatedly to select DNR function and press ↵.
4. Use ◄ or ► to adjust the DNR’s 3 levels (minimum, medium, and
maximum).
5. Press ↵ to finalize your selection.
Please Note :
•
This function can be reset back to the default via the RECALL
subfunction under PICTURE MODE.
•
This function works under analog TV channels only.
- 57 -
www.SCEPTRE.com
Download from Www.Somanuals.com. All Manuals Search And Download.
SCEPTRE X32 HDTV User Manual
BACKLIGHT CONTROL – This function adjusts the LCD lamp’s current. The
current affects the brilliance of the picture.
1. Press MENU to open the OSD and highlight PICTURE by pressing the
▼ button.
2. Press ↵ or ► to move to the functions and highlight PICTURE MODE.
3. Press ▼ repeatedly to select BACKLIGHT CONTROL function and press
↵.
4. Use ◄ or ► to adjust the backlight level.
Please Note :
•
•
The backlight level does not affect the brightness or the contrast
of the picture. It just affects the brilliance of the picture.
This function can be reset back to the default via the RECALL
subfunction under PICTURE MODE.
- 58 -
www.SCEPTRE.com
Download from Www.Somanuals.com. All Manuals Search And Download.
SCEPTRE X32 HDTV User Manual
Sound Main Option
This option allows users to adjust the TV’s sound functions, including sound
mode, auto volume level, digital audio out..etc.
SOUND MODE – This function allows you to select various sound modes among
custom, standard, movies, music, and speech.
1. Press MENU to open the OSD and highlight SOUND by pressing the ▼
button.
2. Press ↵ or ► to move to the functions and highlight SOUND MODE.
3. Press ↵ or ► to select SOUND MODE function.
4. Use ▲ or ▼ to select which sound mode you want.
5. Press ↵ to confirm you selection.
Please Note :
•
This function can be reset back to the default via the RECALL
subfunction under SOUND MODE.
•
CUSTOM allows you to adjust the sound levels to your personal
preference.
•
•
•
•
•
STANDARD is for normal TV programs.
MOVIES – is for watching movies.
MUSIC – is for watching MTVs and concerts.
SPEECH – is for watching news.
RECALL – is not a sound mode but a function to reset CUSTOM
sound mode back to it’s default settings.
- 59 -
www.SCEPTRE.com
Download from Www.Somanuals.com. All Manuals Search And Download.
SCEPTRE X32 HDTV User Manual
TREBLE – This function adjusts the level of high pitch sound in a TV.
1. Press MENU to open the OSD and highlight SOUND by pressing the ▼
button.
2. Press ↵ or ► to move to the functions and highlight SOUND MODE.
3. Press ▼ repeatedly to select TREBLE.
4. Press ↵ or ► to select the function.
5. Use ◄ or ► to adjust the level.
Please Note :
•
This function can be reset back to the default via the RECALL
subfunction under SOUND MODE.
- 60 -
www.SCEPTRE.com
Download from Www.Somanuals.com. All Manuals Search And Download.
SCEPTRE X32 HDTV User Manual
BASS – This function adjusts the level of low pitch sound in a TV.
1. Press MENU to open the OSD and highlight SOUND by pressing the ▼
button.
2. Press ↵ or ► to move to the functions and highlight SOUND MODE.
3. Press ▼ repeatedly to select BASS.
4. Press ↵ or ► to select the function.
5. Use ◄ or ► to adjust the level.
Please Note :
•
This function can be reset back to the default via the RECALL
subfunction under SOUND MODE.
- 61 -
www.SCEPTRE.com
Download from Www.Somanuals.com. All Manuals Search And Download.
SCEPTRE X32 HDTV User Manual
BALANCE – This function adjusts the balance of sound from left to right.
1. Press MENU to open the OSD and highlight SOUND by pressing the ▼
button.
2. Press ↵ or ► to move to the functions and highlight SOUND MODE.
3. Press ▼ repeatedly to select BALANCE.
4. Press ↵ or ► to select the function.
5. Use ◄ or ► to adjust the level.
Please Note :
•
This function can be reset back to the default via the RECALL
subfunction under SOUND MODE.
- 62 -
www.SCEPTRE.com
Download from Www.Somanuals.com. All Manuals Search And Download.
SCEPTRE X32 HDTV User Manual
AVL (Auto Volume Level) – This function will enable an automatic balancing of
sound when certain channels suddenly become over bearing.
1. Press MENU to open the OSD and highlight SOUND by pressing the ▼
button.
2. Press ↵ or ► to move to the functions and highlight SOUND MODE.
3. Press ▼ repeatedly to select AVL.
4. Press ↵ or ► to select the function.
5. Use ◄ or ► to enable or disable the auto volume level.
Please Note :
•
This function can be reset back to the default via the RECALL
subfunction under SOUND MODE.
- 63 -
www.SCEPTRE.com
Download from Www.Somanuals.com. All Manuals Search And Download.
SCEPTRE X32 HDTV User Manual
AUDIO LANGUAGE – This function is for MTS (multi-channel television sound).
It will change the spoken language of a TV program via SAP (secondary audio
programming). The TV station will need to support the TV program in different
languages in order for this function to work.
1. Press MENU to open the OSD and highlight SOUND by pressing the ▼
button.
2. Press ↵ or ► to move to the functions and highlight SOUND MODE.
3. Press ▼ repeatedly to select AUDIO LANGUAGE.
4. Press ↵ or ► to select the function.
5. Use ◄ or ► to switch between the languages.
Please Note :
•
•
This function can be reset back to the default via the RECALL
subfunction under SOUND MODE.
This function is not always available. It is based upon the
support of your local TV broadcasting station’s signal. If the TV
station does not support MTS/SAP, you will not be able to
receive any alternative audio language. Please check with your
local broadcasting stations for more information.
- 64 -
www.SCEPTRE.com
Download from Www.Somanuals.com. All Manuals Search And Download.
SCEPTRE X32 HDTV User Manual
DIGITAL AUDIO OUT – This function enables the TV to output sound in 2 digital
formats, PCM, and Bit Stream for digital home theater receivers.
1. Press MENU to open the OSD and highlight SOUND by pressing the ▼
button.
2. Press ↵ or ► to move to the functions and highlight SOUND MODE.
3. Press ▼ repeatedly to select DIGITAL AUDIO OUT.
4. Press ↵ or ► to select the function.
5. Use ◄ or ► to select between the two options PCM and BITSTREAM.
Please Note :
•
•
PCM & BIT STREAM are two formats of digital sound. If you
have a digital home theater system, you should use BIT
STREAM for your digital audio out.
Not all TV programming will give you digital surround sound.
The sound signal is based on the TV broadcasting station’s
support. Please check with your local broadcasting stations for
more information.
•
This function can be reset back to the default via the RECALL
subfunction under SOUND MODE.
- 65 -
www.SCEPTRE.com
Download from Www.Somanuals.com. All Manuals Search And Download.
SCEPTRE X32 HDTV User Manual
Function Main Option
This option allows users to turn on TV program filters for children, and also
closed captioning support options. To use this option you will need to enter in
the password first. The password is “0000”.
AUTO LOCK – This function helps parents filter TV programming by either
locking channels by choice or blocking channels based on the ratings that TV
stations submit through the signal.
- 66 -
www.SCEPTRE.com
Download from Www.Somanuals.com. All Manuals Search And Download.
SCEPTRE X32 HDTV User Manual
1. SET BLOCKING – This subfunction turns blocking from CHANNEL
BLOCKING on or off.
a. Press MENU to open the OSD and highlight FUNCTION by pressing
the ▼ button.
b. Press ↵ or ► to select the option and highlight AUTO LOCK.
c. Press ↵ to select the function.
d. Use ↵ or ► to select SET BLOCKING.
e. Enter “0000” as the default password.
f. Press ↵ to select the function.
g. Use ▲ or ▼ to choose the option you want and press ↵ to select.
Please Note :
•
•
Turning the subfunction on will enable the CHANNEL
BLOCKING FUNCTION. Turning the subfunction off will disable
the CHANNEL BLOCKING FUNCTION.
You can also disable the function by pressing in the password.
- 67 -
www.SCEPTRE.com
Download from Www.Somanuals.com. All Manuals Search And Download.
SCEPTRE X32 HDTV User Manual
2. CHANNEL BLOCKING – This subfunction blocks channels by selecting
them off a channel list.
a. Press MENU to open the OSD and highlight FUNCTION by
pressing the ▼ button.
b. Press ↵ or ► to select the functions and highlight AUTO LOCK.
c. Press ↵ to select the function.
d. Press ▼ to select CHANNEL BLOCKING.
e. Press ↵ to select the function.
f. Highlight the channel you want to lock by using ▲ or ▼ buttons.
g. Lock or unlock the channel by pressing the ↵ button.
i.
If a channel is locked it would have the ±symbol.
If a channel is unlocked it would have the symbol.
ii.
Please Note :
•
•
•
This function will only work if SET BLOCKING subfunction is
turned on.
You can disable the function during channel browsing when
it asks you for the auto lock password.
The default auto lock password is “0000”.
- 68 -
www.SCEPTRE.com
Download from Www.Somanuals.com. All Manuals Search And Download.
SCEPTRE X32 HDTV User Manual
3. BLOCK BY RATING – This subfunction blocks channels by reading each
channel’s TV program or movie rating.
a. Press MENU to open the OSD and highlight FUNCTION by pressing
the ▼ button.
b. Press ↵ or ► to select the functions and highlight AUTO LOCK.
c. Press ↵ to select the function.
a. Press ▼ until you see BLOCK BY RATING and use ↵ to select
BLOCK BY RATING.
b. You can block movies by selecting the ratings under MPAA and TV
shows under TV Parental Guidelines.
i. Use ▲▼◄► to move to the ratings you want to block.
ii. Press ↵ to block or unblock. If a rating is locked it would
have the ±symbol. If a rating is unlocked it would have the
symbol.
Please Note :
•
This type of filtering for children watching TV will not always
work since the ratings signal is dependent on whether the
TV station sends the signal or not and whether the TV
receives the ratings signal or not. For better assurance
please use the CHANNEL BLOCKING subfunction.
- 69 -
www.SCEPTRE.com
Download from Www.Somanuals.com. All Manuals Search And Download.
SCEPTRE X32 HDTV User Manual
4. DTV RATING – This subfunction gathers all digital channels’s
programming rating.
a. Press MENU to open the OSD and highlight FUNCTION by pressing
the ▼ button.
b. Press ↵ or ► to select the functions and highlight AUTO LOCK.
c. Press ↵ to select the function.
d. Press ▼ until you see DTV RATING and use ↵ to select it.
e. Press ↵ again to begin scanning for DTV ratings.
Please Note :
•
This type of ratings for children watching TV will not always
work since the ratings signal is dependent on whether the
TV station sends the signal or not and whether the TV
receives the ratings signal or not. For better assurance
please use the CHANNEL BLOCKING subfunction.
- 70 -
www.SCEPTRE.com
Download from Www.Somanuals.com. All Manuals Search And Download.
SCEPTRE X32 HDTV User Manual
5. SETUP CODE – This subfunction sets the password.
a. Press MENU to open the OSD and highlight FUNCTION by pressing
the ▼ button.
b. Press ↵ or ► to select the functions and highlight AUTO LOCK.
c. Press ↵ to select the function.
d. Press ▼ until you see SETUP CODE and use ↵ to select it.
e. Input “0000” as your password and input your new password.
Please Note :
•
•
There is no way of resetting the password.
If you’re going to change the password, please write it down
and keep it in a safe place just in case you forget.
- 71 -
www.SCEPTRE.com
Download from Www.Somanuals.com. All Manuals Search And Download.
SCEPTRE X32 HDTV User Manual
CAPTION – This function shows closed caption of TV programs.
1. Press MENU to open the OSD and highlight FUNCTION by pressing the
▼ button.
2. Press ↵ or ► to select the functions and highlight AUTO LOCK.
3. Press ▼ until you see CAPTION and use ↵ to select it.
4. Use ▲▼◄► to select the option you want.
5. US stations usually use CC1 for analog and CS1 for digital closed
captioning.
6. Other CC and CS services do not apply to TV captioning inside US.
7. TT refers to text boxes that display the TV channel’s extra information.
Please Note :
•
•
Analog and digital closed captioning will automatically switch for you
when you switch channels.
Not all TV programs support closed captioning. This function
depends on the TV station to support the signal with captioning. For
more information please contact your TV broadcasting stations.
TT box information may or may not display any related info to the TV
program you are watching
•
- 72 -
www.SCEPTRE.com
Download from Www.Somanuals.com. All Manuals Search And Download.
SCEPTRE X32 HDTV User Manual
CAPTION OPTION – This function locks or unlocks options you can use to
adjust the way your digital caption is displayed.
1. Press MENU to open the OSD and highlight FUNCTION by pressing the
▼ button.
2. Press ↵ or ► to select the functions and highlight AUTO LOCK.
3. Press ▼ until you see CAPTION OPTION and use ↵ to select it.
4. Use ◄ or ► to select the option you want.
5. AUTO locks up the functions CC BACKGROUND and CAPTION TEXT.
6. OPTIONS unlocks the functions CC BACKGROUND and CAPTION
TEXT.
Please Note :
•
Only digital station’s closed captioning will be affected by this
function. If you are on an analog TV channel, the caption will
remain the same as before.
- 73 -
www.SCEPTRE.com
Download from Www.Somanuals.com. All Manuals Search And Download.
SCEPTRE X32 HDTV User Manual
CC BACKGROUND – This function adjusts digital channel’s closed captioning
background.
1. Press MENU to open the OSD and highlight FUNCTION by pressing the
▼ button.
2. Press ↵ or ► to select the functions and highlight AUTO LOCK.
3. Press ▼ until you see CC BACKGROUND and use ↵ to select it.
4. Use ▲▼◄► to select the option you want.
5. The normal closed captioning defaults to a solid black background with
white color text.
6. COLOR adjusts the background color.
7. OPACITY adjusts how transparent or solid you want the background
color to be.
Please Note :
•
This function only works under digital channels. If you are on an
analog channel this function will default to the regular black
background with white text.
- 74 -
www.SCEPTRE.com
Download from Www.Somanuals.com. All Manuals Search And Download.
SCEPTRE X32 HDTV User Manual
CAPTION TEXT – This function adjusts digital channel’s closed captioning text
styles.
1. Press MENU to open the OSD and highlight FUNCTION by pressing the
▼ button.
2. Press ↵ or ► to select the functions and highlight AUTO LOCK.
3. Press ▼ until you see CAPTION TEXT and use ↵ to select it.
4. Use ▲▼◄► to select the options you want.
5. The normal closed captioning defaults to a solid black background with
white color text.
6. CAPTION SIZE changes the font size of the text.
7. CAPTION STYLE changes the font style of the text.
8. TEXT COLOR changes the font color of the text.
9. TEXT OPACITY changes the caption text from transparent to solid.
10. EDGE STYLE enhances a caption text’s visibility by adding a 3
dimensional detail to the text. There are various options to this
subfunction.
11. EDGE COLOR changes the 3 dimensional effect’s color.
12. ITALIC makes the caption text look slanted.
13. UNDERLINE puts a line across the bottom of the caption text.
Please Note :
•
These options only work under digital channels. If you are on an
analog channel this function will default to the regular black
background with white text.
- 75 -
www.SCEPTRE.com
Download from Www.Somanuals.com. All Manuals Search And Download.
SCEPTRE X32 HDTV User Manual
GUIDE – This function shows you detailed information about your current digital
channel’s programming and the entire day’s program list.
1. Press MENU to open the OSD and highlight FUNCTION by pressing the
▼ button.
2. Press ↵ or ► to select the functions and highlight AUTO LOCK.
3. Press ▼ until you see GUIDE and use ↵ twice to select it.
- 76 -
www.SCEPTRE.com
Download from Www.Somanuals.com. All Manuals Search And Download.
SCEPTRE X32 HDTV User Manual
Setup Main Option
This main option has functions that allows users to power the TV on or off at a
specific time and date, adjusting PC resolutions for VGA cards, and changing
time and date for the TV.
DATE / TIME – This function adjusts the time and date.
1. Press MENU to open the OSD and highlight SETUP by pressing the ▼
button.
2. Press ↵ or ► to select the functions and highlight DATE/TIME.
3. Press ↵ to select the function.
4. Use ▲▼◄► to select the options.
5. MANUAL allows you to choose your own time and date.
6. AUTO makes the TV receive time from TV station’s broadcasting signals.
7. You can select the time zone of your TV and also whether you observe
daylight savings time or not.
Please Note :
•
The AUTO DATE/TIME feature only works under digital antenna
channels. If you are on an analog antenna, analog cable, or
digital cable channel, you will have to manually set the time.
- 77 -
www.SCEPTRE.com
Download from Www.Somanuals.com. All Manuals Search And Download.
SCEPTRE X32 HDTV User Manual
POWER ON TIME – This function automatically turns the TV on to a specific
channel at a set specific time and date.
1. Press MENU to open the OSD and highlight SETUP by pressing the ▼
button.
2. Press ↵ or ► to select the functions and highlight DATE/TIME.
3. Press ▼ to select POWER ON TIME and press ↵.
4. Use ▲▼◄► to select the options.
5. You choose the time, date, and channel.
6. After you have finished setting up the time, date, and channel, please
choose if you want this option to turn on the TV daily or once only.
7. Select ACTIVATE and press ↵.
Please Note :
•
This function is only for turning on the TV. If you do not setup
POWER OFF TIME function, the TV will never turn itself off. If
you are going on vacation for a long time, please do not forget to
set the function POWER OFF TIME.
- 78 -
www.SCEPTRE.com
Download from Www.Somanuals.com. All Manuals Search And Download.
SCEPTRE X32 HDTV User Manual
POWER OFF TIME – This function automatically turns the TV off at a set specific
time and date.
1. Press MENU to open the OSD and highlight SETUP by pressing the ▼
button.
2. Press ↵ or ► to select the functions and highlight DATE/TIME.
3. Press ▼ repeatedly until you select POWER OFF TIME and press ↵.
4. Use ▲▼◄► to select the options.
5. You choose the time, and date.
6. After you have finished setting up the time, and date, please choose if
you want this option to turn on the TV daily or once only.
7. Select ACTIVATE and press ↵.
- 79 -
www.SCEPTRE.com
Download from Www.Somanuals.com. All Manuals Search And Download.
SCEPTRE X32 HDTV User Manual
SLEEP – This function makes the TV turn itself off after a set number of minutes.
1. Press MENU to open the OSD and highlight SETUP by pressing the ▼
button.
2. Press ↵ or ► to select the functions and highlight DATE/TIME.
3. Press ▼ repeatedly until you select SLEEP and press ↵.
4. Use ▲ or ▼ to select how many minutes you want the TV to be on and
press ↵.
5. Once selected the TV will begin counting the minutes immediately.
- 80 -
www.SCEPTRE.com
Download from Www.Somanuals.com. All Manuals Search And Download.
SCEPTRE X32 HDTV User Manual
MENU LANGUAGE – This function changes the entire OSD’s language.
1. Press MENU to open the OSD and highlight SETUP by pressing the ▼
button.
2. Press ↵ or ► to select the functions and highlight DATE/TIME.
3. Press ▼ repeatedly until you select MENU LANGUAGE and press ↵.
4. Use ◄ or ► to select language you want the TV to display the OSD in
and press ↵.
5. Once selected the TV will display the language of your choice.
- 81 -
www.SCEPTRE.com
Download from Www.Somanuals.com. All Manuals Search And Download.
SCEPTRE X32 HDTV User Manual
MENU OPACITY – This function changes the OSD menu’s visual from
transparent to solid.
1. Press MENU to open the OSD and highlight SETUP by pressing the ▼
button.
2. Press ↵ or ► to select the functions and highlight DATE/TIME.
3. Press ▼ repeatedly until you select MENU OPACITY and press ↵.
4. Use ◄ or ► to select how transparent or solid you want to display the
OSD in and press ↵.
- 82 -
www.SCEPTRE.com
Download from Www.Somanuals.com. All Manuals Search And Download.
SCEPTRE X32 HDTV User Manual
EMERGENCY ALERT – This function adjusts options regarding your local
emergency broadcasting service.
1. Press MENU to open the OSD and highlight SETUP by pressing the ▼
button.
2. Press ↵ or ► to select the functions and highlight DATE/TIME.
3. Press ▼ repeatedly until you select EMERGENCY ALERT and press ↵.
4. Use ▲▼◄► to select if you want to display medium or low emergency
alerts in your local area and press ↵.
Please Note :
•
This function is dependent on your local TV station’s support. If
your local TV stations do not support such function,
EMERGENCY ALERT will not work.
- 83 -
www.SCEPTRE.com
Download from Www.Somanuals.com. All Manuals Search And Download.
SCEPTRE X32 HDTV User Manual
PC – This function is for people who use the X32 LCD HDTV’s VGA port as a PC
monitor only. The function adjusts the position and syncs the signal of the PC.
1. Press MENU to open the OSD and highlight SETUP by pressing the ▼ button.
2. Press ↵ or ► to select the functions and highlight DATE/TIME.
3. Press ▼ repeatedly until you select PC and press ↵.
4. Use ▲ or ▼ to select the subfunction you want and press ↵.
5. AUTO ADJUST is a typical LCD monitor’s auto adjust function. It syncs to the
signal of the VGA card and auto adjusts the clock and phase of the signal so
your picture comes out clear and centered.
6. HOR.CENTER moves the picture left or right.
7. VER.CENTER moves the picture up or down.
8. PHASE adjusts the video signal in a small increment to sync with the PC.
9. CLOCK adjusts the video signal in a large increment to sync with the PC.
10. PREF. RESOLUTION is a special function for two specific resolutions. They are
1360x768 at 60hz refresh rate and 1280x768 at 60hz refresh rate. These two
resolutions are the only two that are proportionate to the LCD screen itself. If you
are using those two resolutions, you will need to set the screen to those
resolutions using this function. To set them, change your PC side resolution first,
and then select this function.
Please Note :
•
•
The X32 LCD HDTV’s best PC resolution is 1360x768 at 60hz.
Always try to use AUTO ADJUST over manual adjustments.
- 84 -
www.SCEPTRE.com
Download from Www.Somanuals.com. All Manuals Search And Download.
SCEPTRE X32 HDTV User Manual
MENU TIMEOUT – This function adjusts how long the menu will be on the
screen when you’re not using it.
1. Press MENU to open the OSD and highlight SETUP by pressing the ▼
button.
2. Press ↵ or ► to select the functions and highlight DATE/TIME.
3. Press ▼ repeatedly until you select MENU TIMEOUT and press ↵.
4. Use ▲ or ▼ to select how long you want the OSD to display when it is
idle.
5. Please finalize the selection by pressing ↵.
- 85 -
www.SCEPTRE.com
Download from Www.Somanuals.com. All Manuals Search And Download.
SCEPTRE X32 HDTV User Manual
Detailed Explanations
Info Banner Explained
The info banner is a banner that shows TV programming info on the top portion
of your TV. This function is only available when you use the ATSC/NTSC tuner
port.
The info banner’s left side shows you typical programming information such as
TV station name, number, program name, date, and times the show starts and
ends.
- 86 -
www.SCEPTRE.com
Download from Www.Somanuals.com. All Manuals Search And Download.
SCEPTRE X32 HDTV User Manual
The info banner’s right side shows you the TV’s display information such as HD
(High Definition) or SD (regular TV) mode, stereo sound, closed captioning, and
digital surround sound.
•
HD or SD – If highlighted this symbol shows you whether the
channel you are watching is in HD (High Definition) or Standard
Definition (regular TV).
((S)) – If Highlighted this symbol shows you that the channel you
are watching is in stereo sound.
- 87 -
www.SCEPTRE.com
Download from Www.Somanuals.com. All Manuals Search And Download.
SCEPTRE X32 HDTV User Manual
•
If highlighted this symbol shows you are using the SAP
(secondary audio programming) function from the TV
channel. You can do so via the MTS button on the remote
control. Please Note : This function is always active under
analog stations whether the station supports this function or not.
•
CC – If highlighted, this symbol tells you that this channel
supports closed captioning.
•
5.1 CH – If highlighted this symbol tells you that this channel
supports 5.1 channel digital surround sound.
- 88 -
www.SCEPTRE.com
Download from Www.Somanuals.com. All Manuals Search And Download.
SCEPTRE X32 HDTV User Manual
•
TV-MA ALL – This is a type of TV rating. This section tells you
the TV ratings of the program you are watching. Please refer to
ratings explained for more information on ratings.
•
This symbol and the indicator bar show you how strong
your current channel’s signal is. This function is only
available under digital channels.
Aspect Ratio Explained
The TV will display the TV channel’s signal format automatically. There are
mainly two types of signal format, 16:9 and 4:3.
1. 16:9 Wide
This mode will stretch the picture to a widescreen ratio. If you have a perfect
16:9 ratio picture you will not see any black bars. If you are watching a
widescreen movie in 1.85:1 or 2.35:1 ratio, you will still get black bars on the
top and bottom of the screen.
- 89 -
www.SCEPTRE.com
Download from Www.Somanuals.com. All Manuals Search And Download.
SCEPTRE X32 HDTV User Manual
2. 16:9 Normal
This mode will squeeze a 16:9 picture into a 4:3 format with black bars on the
side.
3. 4:3 Wide
Most analog TV channels have 4:3 signal formats. If the original 4:3 aspect
ratio (1.33:1 source) is preserved, black bars are added to the left and right
of the display image. This aspect stretches the picture to fill up the screen so
that the black bars will not be present. Please Note : You will receive a
distorted image when selecting this mode.
- 90 -
www.SCEPTRE.com
Download from Www.Somanuals.com. All Manuals Search And Download.
SCEPTRE X32 HDTV User Manual
4. 4:3 Normal
Most analog TV channels have 4:3 signal formats. If the original 4:3 aspect
ratio (1.33:1 source) is preserved, black bars are added to the left and right
of the display image. This aspect keeps that aspect ratio and shows you the
black bars on the side.
5. 4:3 Zoom
When watching a 4:3 aspect ratio TV or movie, this mode zooms in to cut off
most of the black bars on the side while preserving the 16:9 ratio. Because
of the zoom, the top and bottom are cut off as well. Please Note : When in
HD mode aspect ratios will not work because it is controlled by the signal.
Closed Captioning (digital and analog) Explained
•
Your TV is equipped with an internal Closed Caption decoder. It allows
you to view conservations, narration and sound effects as subtitles on
your TV. Closed Captions are available on most TV program, and on
- 91 -
www.SCEPTRE.com
Download from Www.Somanuals.com. All Manuals Search And Download.
SCEPTRE X32 HDTV User Manual
some VHS home video tapes, at the election of the program provider.
•
Digital Closed Caption service is a new caption service available on
digital TV programs (also at the election of the service provider). It is a
more flexible system than the original Closed Caption system, because it
allows a variety of caption sizes and font styles.
•
•
Not all programs and VHS video tapes offer closed caption. Please look
for the CC symbol to ensure that captions will be shown.
In the Closed Caption system, there can be more than one caption
service provided. Each is identified by its own number. The CC1 and
CC2 services display subtitles of TV programs superimposed over the
program’s picture.
•
In the Closed Caption system, the TEXT1 or TEXT2 services display text
that is unrelated to the program being viewed (e.g., weather or news).
These services are also superimposed over the program currently being
viewed.
Rating Explained
General Operation
To block channels you don’t want your children to watch, you can filter them with
the ratings function. MPAA lets you control ratings for movies. For regular TV
programs you can use USTV settings. USTV settings lets you filter what content
you want at each age level, TV-Y, to TV-MA (refer to definitions below). Below
are definitions for each setting.
- 92 -
www.SCEPTRE.com
Download from Www.Somanuals.com. All Manuals Search And Download.
SCEPTRE X32 HDTV User Manual
USTV Rating
TV-Y (USTV) – For All Children
This program is designed to be appropriate for all children. Whether animated or
live-action, the themes and elements in this program are specifically designed for
a very young audience, including children from ages 2-6. This program is not
expected to frighten younger children.
TV-Y7 (USTV) – Directed to Older Children
This program is designed for children age 7 and above. It may be more
appropriate for children who have acquired the developmental skills needed to
distinguish between make-believe and reality. Themes and elements in this
program may include mild fantasy violence or comedic violence, or may frighten
children under the age of 7. Therefore, parents may want to consider the
suitability of this program for their very young children. Note: For those programs
where fantasy violence may be more intense or more combative than other
programs in this category, such programs will be designated TV-Y7-FV.
TV-G (USTV) – General Audience
Most parents would find this program suitable for all ages. Although this rating
does not signify a program designed specifically for children, most parents may
let younger children watch this program unattended. It contains little or no
violence, no strong language and little or no sexual dialogue or situations.
TV-PG (USTV) – Parental Guidance Suggested
This program contains material that parents may find unsuitable for younger
children. Many parents may want to watch it with their younger children. The
theme itself may call for parental guidance and/or the program contains one or
more of the following: moderate violence (V), some sexual situations (S),
infrequent coarse language (L), or some suggestive dialogue (D).
TV-14 (USTV) – Parents Strongly Cautioned
This program contains some material that many parents would find unsuitable for
children less than 14 years of age. Parents are strongly urged to exercise greater
care in monitoring this program and are cautioned against letting children under
the age of 14 watches unattended. This program contains one or more of the
following: intense violence (V), intense sexual situations (S), strong coarse
language (L), or intensely suggestive dialogue (D).
TV-MA (USTV) – Mature Audience Only
This program is specifically designed to be viewed by adults and therefore may
be unsuitable for children under 17. This program contains one or more of the
- 93 -
www.SCEPTRE.com
Download from Www.Somanuals.com. All Manuals Search And Download.
SCEPTRE X32 HDTV User Manual
following: graphic violence (V), explicit sexual activity (S), or crude indecent
language (L).
TV program description
FV - Fantasy Violence
V - Violence
S - Sexual Situations
L - Adult Language
D - Sexually Suggestive Dialog
MPAA Rating
G (MPAA)
General audiences. All ages admitted.
PG (MPAA)
Parental guidance suggested. Some material may not be suitable for children.
PG-13 (MPAA)
Parents strongly cautioned. Some material may be inappropriate for children
under 13.
R (MPAA)
Restricted. Under 17 requires accompanying parent or adult guardian (age varies
in some juridictions).
NC-17 (MPAA)
No one 17 and under admitted.
X (MPAA)
X is an older rating that is unified with NC-17 but may be encoded in the data of
older movies.
Glossary
Analog TV – Today’s TV system is using radio frequency waves to transmit and
display pictures and sound. 480i is today’s analog TV resolution.
Aspect Ratio 4:3 – Traditional TV “ aspect ratio”, that is, the screen’s width as
compared to it’s height. For example a 32 inch TV would be 25 inches wide and
19 inches tall.
- 94 -
www.SCEPTRE.com
Download from Www.Somanuals.com. All Manuals Search And Download.
SCEPTRE X32 HDTV User Manual
Aspect Ratio 16:9 – “Wide screen TV” aspect ratio, which is more like a movie
screen than a traditional TV. For example your X32 LCD HDTV would be around
28 inches wide and 16 inches tall.
Digital Channel – Television channel delivered and displayed using radio
frequency waves that contain information that is digitally encoded for improved
quality and efficiency.
ATSC/NTSC Tuner – A device capable of receiving and outputting HDTV and
analog TV signals for display.
HDTV – Television with the best quality picture, wide screen 16:9 display with at
least 720 progressively scanned lines (720P) or 1080 interlaced lines (1080i) and
digital surround sound. HDTV provides 900,000 – 2.1 million pixels.
Interlace Scan – A way to scan vertical lines onto a TV picture by scanning all
the odd lines first, then filling in the even lines (this happens instantaneously). In
a fast moving action picture or sports channel, this type of scanning will show
pixilation.
Progressive Scan – A way to scan vertical lines onto a TV picture by scanning
all the lines consecutively (progressively). In a fast moving action picture or
sports channel, this type of scanning will show NO pixilation.
How do I clean the TV ?
IMPORTANT
1. The power cable has to be removed from the socket before cleaning
the TV.
2. Do not use volatile solvent (alcohol, rosin, and toluene) to clean the
TV. These types of chemicals might damage the housing and the
LCD glass.
Cleaning the bezel and remote control
1. Use a 100% cotton cloth or micro-fiber cloth for cleaning.
2. If the remote control or bezel is dirty to the point where you cannot
simply dry wipe it, please lightly dampen the wiping material with
- 95 -
www.SCEPTRE.com
Download from Www.Somanuals.com. All Manuals Search And Download.
SCEPTRE X32 HDTV User Manual
clean water and wipe again. Wipe the display with a dry micro-fiber
cloth or 100% cotton cloth afterwards.
Please Note :
•
Make sure you wring the water out of the cloth before
cleaning the bezel or remote in order to prevent water
from penetrating into the electronics.
Cleaning the Screen
1. Use a 100% cotton cloth or micro-fiber cloth for cleaning.
2. The LCD screen glass is extremely fragile. Do not scrape it with any
material. Do not press or tap the screen to avoid cracking. When
the screen is dirty to the point where you cannot simply dry wipe it,
please lightly dampen the wiping material with clean water and wipe
again. Wipe the display with a dry micro-fiber cloth or 100% cotton
cloth afterwards.
Trouble Shooting
The following table contains the common problems and the solutions to these
problems. Please check this list before you contact the technicians.
Problems
Solutions
Connect power cord correctly.
Turn on power.
NO
PICTURE
Connect video cable correctly.
Select the input signal source with proper cable connection with
the source button.
ABNORMAL Match the colors on the cables to the ports off the back of the
COLORS television. I.E. red cable to red colored port.
PICTURE IS Adjust your contrast, brightness and lamp settings from the OSD
TOO DARK Menu.
AUDIO
Make sure you have connected both your video and audio cables.
ONLY NO
PICTURE
The TV’s tuner signal must not be lower than 65 dB.
- 96 -
www.SCEPTRE.com
Download from Www.Somanuals.com. All Manuals Search And Download.
SCEPTRE X32 HDTV User Manual
Problems
Solutions
PICTURE ONLY Make sure the audio cable is connected.
NO AUDIO
Readjust your volume via the remote control.
The TV’s tuner signal must not be lower than 65 dB.
Turn off the TV, unplug it from the socket. Remove the
batteries out of the remote for 30 minutes. Press the remote
buttons and the power button randomly for a good 2 seconds,
and then reinstall the batteries. Try the remote to see if it
works.
The TV’s remote sensor is also housed in the same place as
the power indicator light. Please make sure there is line of
sight from the remote control’s front sensor to the remote
sensor of the TV.
REMOTE
CONTROL
DOES NOT
WORK
CANNOT
RECEIVE
The TV’s tuner signal must not be lower than 65 dB. Change
the direction of your antenna and rescan your channels. If
you have cable call up your cable company and ask about
signal strength of your local cable.
SUFFICIENT
CHANNELS
THROUGH THE
ATSC/NTSC
TUNER
Please adjust your picture setup and make sure the saturation
and the RGB are not turned all the way down.
The TV’s tuner signal must not be lower than 65 dB. Check
your signal.
NO COLOR
WEAK SIGNAL The TV’s tuner signal must not be lower than 65 dB. Change
OR NO
the direction of your antenna and rescan your channels. If
you have cable call up your cable company and ask about
signal strength of your local cable.
PROGRAM
SYMBOL ON
SCREEN
TV CHANNELS Check your auto lock function’s settings inside the OSD. You
ARE BLOCKED may have locked up some channels but forgot about them.
UNIVERSAL
This TV follows SONY’s universal remote code. Please check
REMOTE CODE your hand book for SONY’s codes then apply them.
THE TV TURNS This TV is a High Definition liquid crystal display panel TV. It
ON OR OFF
SLOWLY AND
THE SCREEN
SHOWS UP
SLOWLY
requires a few more seconds than normal TVs to power up
and show the picture.
NO SOUND ON Make sure you have a 3.5 mm mini-jack cable connected from
PC
your pc’s sound output to the TV’s VGA STEREO INPUT.
- 97 -
www.SCEPTRE.com
Download from Www.Somanuals.com. All Manuals Search And Download.
SCEPTRE X32 HDTV User Manual
Problems
HDCP VIDEO
Solutions
Reboot your HDCP video device but turning them off and
SAYS NO HDCP unplugging the power cord. Wait up to 8 minutes to plug the
SUPPORT
power back in to see if it works or not.
Make sure you have a 3.5 mm mini-jack cable connected from
your HDCP video device’s sound output to the TV’s VGA
HDCP VIDEO
HAS NO AUDIO STEREO INPUT. If your HDCP video device uses RCA
AUDIO jacks, you’ll need to obtain a RCA audio converted
into 3.5 mm mini-jack cable.
CANNOT GET
1366X768 ON
PC VGA
Although the screen’s max resolution is 1366x768, no video
card maker can support such resolution. The industry
standard for similar resolution support is 1360x768. Please
use that as you resolution.
PICTURE IS
This might be from interference from large electrical
DISTORTED OR appliances, cars, motorcycles, or fluorescent lights. If the TV
HAS ABNORMAL is close to the wall, try moving the TV to another room in your
SOUND
house to see if the problem still occurs.
If you’re using HDMI or a TV digital channel make sure you
use the ASPECT button to switch to 16:9 WIDE format. If you
are using VGA, use the AUTO ADJUST function to adjust to
PICTURE DOES the screen. Please Note : If you are using 1360x768 or
NOT COVER
THE ENTIRE
SCREEN
1280x768 you must also use the PREF. RESOLUTION
function to adjust to the screen as well. If you are using
regular analog TV, AV2, AV2, or component in 480i
resolution, use the ASPECT button to switch to 4:3 WIDE in
order to fill up the screen. Please Note : This note this feature
will distort the picture.
For best image quality, view HD widescreen programs where
possible. If HD content is not available view “Standard
Definition” from a digital source. Standard, analog TV will
always be noticeable inferior to HD because your X32 LCD
HDTV has video that is many times better than old TV’s and
so you can see interference and deficiencies you did not
KNOW you had.
PICTURE
QUALITY IS
HORRIBLE!!
PICTURE HAS
PIXELS THAT
ARE ALWAYS
DISPLAYING
THE SAME
Your X32 LCD HDTV is manufactured using an extremely
high level of precision technology, however, sometimes some
pixels of your X32 LCD HDTV may not display. Pixels defects
within industry specifications are inherent to this type of
product and do not constitute a defective product.
COLOR
- 98 -
www.SCEPTRE.com
Download from Www.Somanuals.com. All Manuals Search And Download.
SCEPTRE X32 HDTV User Manual
Problems
SWITCHING A
CHANNEL OR
SOURCE
Solutions
Different channels and inputs will sometimes have this effect
because the channel signal’s own volume is already loud.
There is no way remove this completely. The TV has an
CHANGES THE AUTO VOLUME LEVEL function that can combat this type of
VOLUME
THERE IS
NOISE OR
effect. Please make sure that function is turned on.
When your LCD HDTV’s resolution is higher than the digital
channel’s broadcast resolution, the signal is up-converted to
TRASH PIXELS match your TV’s resolution. Up-converting can cause this
ON THE
type of effect.
SCREEN
TIPS FOR HIGH The X32 LCD HDTV is an ideal platform for viewing High
DEFINITION
USERS
Definition Content. The best image quality can be achieved
by HDMI, YPbPr (Component), then VGA. However, due to
variances in broadcast practices, it is possible some image
distortions can occur.
TIPS FOR
LETTERBOX
CONTENT
USERS
Letterboxed (Widescreen) versions of DVD movies are most
commonly formatted for standard 4:3 TVs. The X32 LCD
HDTV has the capability of expanding this content so the
entire screen is filled at the expense of the image proportion.
To use this function press the aspect button on the remote
control and cycle among the available options.
- 99 -
www.SCEPTRE.com
Download from Www.Somanuals.com. All Manuals Search And Download.
SCEPTRE X32 HDTV User Manual
Call Us IfYou Need Help!
Products are often returned due to a technical problem rather than a defective
product that may result in unnecessary shipping charges billed to you. Our
trained support personnel can often resolve the problem over the phone or email.
For more information on warranty services or repairs after the warranty period,
please contact our support department at the number below.
For technical help, contact our Sceptre Technical Support Group via email or
phone. Please have your Sceptre p/n number, serial number, and date of
purchase available before you call.
Tech Support E-mail : [email protected]
Customer Service Email : [email protected]
TEL : 1800-788-2878
Operation Hours : Mon - Fri at 8:30 AM – 5:30 PM Pacific Standard Time
16800 East Gale Ave.
City of Industry, CA 91745
TEL : 626-369-3698
FAX : 626-855-5711
Website : www.SCEPTRE.com
- 100 -
www.SCEPTRE.com
Download from Www.Somanuals.com. All Manuals Search And Download.
SCEPTRE X32 HDTV User Manual
Specification
Display panel
Illustration
Diagonal 31.51 inches
Item
Active Area / Screen Size
AspectRatio
Widescreen 16:9
Pixel Pitch
0.5 (H) x RGB x 0.5 (V)mm
HD (1366 x 768 pixels) resolution
500 nits (Typical)
Max. of Pixels (Resolution)
Brightness
Contrast
1200:1 (Typical)
Response Time
8ms (gray to gray)
Typical 176 Degree
(Horizontal/Vertical)
Viewing Angle
Lamp Life of Backlight
> 50,000hrs
TV DISPLAY
31½“(W)x21½“(H)x4”(D) inch without Base
31½“(W)x23½“(H)x9½”(D) inch with Base
Dimension
Weight
30.4 lbs with Base
100-240AVC, 50/60Hz, 2.5A max
Function
Power input
(1)Video
De-interlace
3D
Frame recover
3:2
Noise reducing core technology
3D
16:9 Wide, 16:9 Normal, 4:3 Wide, 4:3
Normal, 4:3 Zoom
Aspect ratio
- 101 -
www.SCEPTRE.com
Download from Www.Somanuals.com. All Manuals Search And Download.
SCEPTRE X32 HDTV User Manual
Gamma
Fixed Gamma
Lamp adjust
Picture mode
Yes
Custom / Standard / Mild / Vivid / Recall
Contrast / Brightness / Sharpness /
Saturation / Tint / RGB
Cool / Normal / Warm
Video adjust
3 levels of color temp. for VGA
(2)Audio
Custom / Standard / Movies / Music /
Speech / Recall
Sound Mode
Auto Volume Level (AVL)
Tone
Loudness
Yes
Bass / Treble / Balance
Yes
SPDIF Out
Speakers
Yes
8 watt per channel
(3) General
Hybrid TV Tuner
Channel auto scan
NTSC / ATSC / QAM (Digital Cable Ready)
Yes
Off /15mins /30mins /60mins /90mins
/120mins
Sleep timer
Standby power
Under 5W
Timing support-Video
480i / 480p / 720p / 1080i scaled
PC timing
1360*768@60Hz(NATIVE)
1280*768@60Hz
1024*768@75Hz
800*600@75Hz
640*480@75Hz
(4)NTSC/ATSC
Sound: Mono / Stereo / SAP
Favorite Channel
NTSC
V-chip
Closed caption
(CC1-CC4, Text 1-Text 4)
Sound: Mono / Stereo / SAP
Favorite Channel
ATSC
V-chip
Video input format: 1080i, 720p, 480p, 480i
- 102 -
www.SCEPTRE.com
Download from Www.Somanuals.com. All Manuals Search And Download.
SCEPTRE X32 HDTV User Manual
Analog closed caption:
(CC1-CC4, Text 1-Text 4)
Digital closed caption:
(Service 1-Service 6)
ATSC (continued)
(5)I/O
TV Tuner (NTSC/ATSC), AV1, AV2, S-
Video1 (Audio Shared with AV1), S-Video2
(Audio Shared with AV2), YPbPr1,
YPbPr2, HDMI/HDCP (optional), VGA,
Video Out, Audio Out, SPDIF out
*The product’s specifications may change without notice or obligation.
**This manual’s pictures and words are for references only and are subject to change without notice
or obligation. Sceptre Inc is not liable for the misuse or misinterpretation of this manual.
- 103 -
www.SCEPTRE.com
Download from Www.Somanuals.com. All Manuals Search And Download.
SCEPTRE X32 HDTV User Manual
LIMITED PRODUCT WARRANTY
Please read this warranty card carefully, it is a “ONE-YEAR LIMITED
WARRANTY” on parts and labor and is only valid when purchased from an
Authorized Reseller, only on new and non-refurbished product, and available to
customers in the Continental US, Alaska, Hawaii and Puerto Rico. See below for
the SCEPTRE Extended Service warranty.
SCEPTRE’s Responsibility
SCEPTRE Displays purchased in the United States are warranted to be free from
defects in materials or workmanship for a period of one (1) year from the date of
their original retail purchase. If the unit fails to conform to this warranty, we will
service the monitor using new or refurbished parts.
Service Labor
During a period of one (1) year from the effective warranty date, SCEPTRE will
provide, when needed, service labor to repair a manufacturing defect at its
designated Service Center. To obtain warranty service in the Untied States, you
must first call our Customer Support at (800) 788-2878. The determination of
service will be made by SCEPTRE Customer Support. PLEASE DO NOT
RETURN YOUR UNIT TO SCEPTRE WITHOUT PRIOR AUTHORIZATION.
Parts
New or remanufactured replacements for defective parts will be used for repairs
by SCEPTRE at its designated Service Center for one (1) year from the effective
warranty date. Such replacement parts are warranted for the remaining portion of
the original warranty period.
Service
During the one (1) year warranty period, SCEPTRE will, at its option and sole
discretion, repair or replace defective parts, including replacement of the entire
Panel. The Customer will be required to ship the unit to the Service Center
indicated at the time Customer Support is contacted to make the necessary
repairs, you are responsible for all transportation charges to the service facility.
SCEPTRE is not responsible for the de-installation or re-installation of the unit.
Packaging and Shipping Instruction
When you send the product to an authorized SCEPTRE service facility you must
use the original carton box and packing material or an equivalent as designated
by SCEPTRE.
- 104 -
www.SCEPTRE.com
Download from Www.Somanuals.com. All Manuals Search And Download.
SCEPTRE X32 HDTV User Manual
Not Covered
This warranty does not cover defects, malfunctions or failures resulting from
shipping or transit accidents, abuse, misuse, operation contrary to furnished
instructions, operation on incorrect power supplies, operation with faulty
associated equipment, modification, alteration, improper servicing, tampering or
normal wear and tear or TVs on which the serial number has been removed or
defaced. Image Sticking caused by operating at excessive brightness levels for
extended periods or mishandling are not covered by this warranty.
ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE SHALL
BE LIMITED IN DURATION TO THE PERIOD OF TIME SET FORTH ABOVE.
OUR LIABILITY FOR ANY AND ALL LOSSES AND DAMAGES RESULTING
FROM ANY CAUSE WHATSOEVER, INCLUDING OUR NEGLIGENCE,
ALLEGED DAMAGE OR DEFECTIVE GOODS, WHETHER SUCH DEFECTS
ARE DISCOVERABLE OR LATENT, SHALL IN NO EVENT EXCEED THE
PURCHASE PRICE OF THE DISPLAY. WE SHALL NOT BE RESPONSIBLE
FOR LOSS OF USE, COMMERCIAL LOSS OR OTHER INCIDENTAL OR
CONSEQUENTIAL DAMAGES. SOME STATES DO NOT ALLOW
LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE
EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT
APPLY TO YOU. This warranty gives you specific legal rights, and you may also
have other rights which vary from state to state. This is the only warranty
applicable; no one is authorized to extend or modify it or to grant any other
warranty.
SCEPTRE retains the right to assess all warranty claims and to determine if
damages are covered by the warranty. In case of a claim that is not covered by
the warranty, you will be contacted to determine whether SCEPTRE should
repair the damage for a fee or whether the product should be returned to you as
received by the repair center.
Dead Pixel Policy
There are millions of pixels on a LCD screen. Therefore, there is industry
standard specification regarding dead or bad pixels. SCEPTRE sets limit on the
LCD at 3 dead pixels in a cluster adjacent to each other, or 5 dead pixels in a
combination of color and brightness of dead pixels. Any number of dead or bad
pixels under the limit is considered normal specification.
Owner’s Responsibility
Effective Warranty Date
Warranty begins on the date of sale to the end user. To ensure warranty service,
keep the dated bill or sale receipt as evidence of the purchase date.
- 105 -
www.SCEPTRE.com
Download from Www.Somanuals.com. All Manuals Search And Download.
SCEPTRE X32 HDTV User Manual
Warranty Service
For warranty service information, contact SCEPTRE Customer Support at (800)
788-2878, 8:30 am to 5:30 pm PST or visit www.Sceptre.com. Parts and service
labor that are SCEPTRE’s responsibility (see above) will be provided without
charge. Other service is at the owner’s expense. You must provide the model,
serial number and date of purchase. Before you ask for warranty service, read
your User Manual. You might avoid a service call.
Warranty conditions are subject to change, for latest Warranty Terms and
Conditions and additional information regarding your warranty, please see
complete details online at www.SCEPTRE.com.
Sceptre Extended Warranty
Protect your investment beyond the standard warranty and experience piece of
mind with SCEPTRE’s Extended Service Warranty.
Depending on your model, plans are offered for an additional 2 years. Visit
www.SCEPTRE.com or call 1-800-788-2878 to purchase a plan today.
- 106 -
www.SCEPTRE.com
Download from Www.Somanuals.com. All Manuals Search And Download.
SCEPTRE X32 HDTV User Manual
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following conditions:
This device may not cause harmful interference
This device must accept any interference received, including interference that my
cause undesired operation.
Please Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
Caution: To comply with the limits for an FCC Class B computing device,
always use the signal cord and power cord supplied with this unit.
The Federal communications Commission warns that changes or modifications
to the unit not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
European Notice
Products with the CE marking comply with both the EMC Directive (89/336/EEC),
(93/68/EEC) and the Low Voltage Directive (72/23/EEC) issued by the
Commission of the European Community.
- 107 -
www.SCEPTRE.com
Download from Www.Somanuals.com. All Manuals Search And Download.
|