Important Information
SCEPTRE X24
Page1
Download from Www.Somanuals.com. All Manuals Search And Download.
European Notice
CE mark for Class B ITE (Following European standard EN55022/1998;
EN61000-3-2/1995; EN61000-3-3/1995, EN55024/1998,
EN60950/1992+A1+A2+A3+A4+A11)
Radio Frequency Interference Statement
Warning:
This is a Class B product. In a domestic environment, this product may cause
radio interference in which case the user may be required to take adequate
measures.
Canadian Doc Notice
For Class B Computing Devices
This digital apparatus does not exceed the Class B limits for radio noise
emissions from digital apparatus as set out in the Radio Interference
Regulation of the Canadian Department of Communications.
“Le présent appareil numérique n’èmet pas de bruits radioélectriques
dépassant les limites applicables aux appareils numériques de la class B
prescrites dans le Règlement sur le brouillage radioélectrique édicté par le
ministère des Communications du Canada."
SCEPTRE X24
Page3
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Information
Electricity is used to perform many useful functions, but it can also cause personal
injuries and property damage if improperly handled. This product has been
engineered and manufactured with the highest priority on safety. However,
improper use can result in electric shock and / or fire. In order to prevent
potential danger, please observe the following instructions when installing,
operating and cleaning the product. To ensure your safety and prolong the
service life of your Liquid Crystal Display, please read the following precautions
carefully before using the product.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug.
A
polarized plug has two blades with one wider than the other. A grounding type
plug has two blades and a third grounding prong. The wide blade and the third
prong are provided for your safety. If the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at the plugs,
convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightening storms or when unused for long periods of
time.
14. Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or
has been dropped.
Page4
SCEPTRE X24
Download from Www.Somanuals.com. All Manuals Search And Download.
Tips and Safety Precautions
This product is designed and manufactured to operate within defined design limits, and
misuse may result in electric shock or fire. To prevent the product from being damaged, the
following rules should be observed for the installation, use and maintenance of the product.
Read the following safety instructions before operating the display. Keep these instructions
in a safe place for future reference.
•
To avoid the risk of electric shock or
component damage, switch off the
power before connecting other
components to the X24 LCD
to smoke or moisture may cause fire
or electric shock.
Slots and openings in the back and
bottom of the bezel are provided for
ventilation. To ensure reliable
•
MONITOR.
•
Unplug the power cord before
cleaning the X24 LCD MONITOR. Do
not use a liquid or a spray cleaner for
cleaning the product. Do not use
abrasive cleaners.
Always use the accessories
recommended by the manufacturer to
insure compatibility.
operation of the X24 LCD MONITOR
and to protect it from overheating, be
sure these openings are not blocked
or covered. Do not place the X24 LCD
MONITOR in a bookcase or cabinet
unless proper ventilation is provided.
It is not recommended to use the X24
LCD MONITOR in a portrait format
(by rotating 90 degrees) under high
temperature environment (25°C or
higher), since this would retard heat
dissipation and would eventually
damage the monitor.
•
•
•
•
When moving the X24 LCD
MONITOR from an area of low
temperature to an area of high
temperature, condensation may form
on the housing. Do not turn on the
X24 LCD MONITOR immediately after
this to avoid causing fire, electric
shock or component damage.
Do not place the X24 LCD MONITOR
on an unstable cart, stand, or table. If
the X24 LCD MONITOR falls, it can
injure a person and cause serious
damage to the appliance. Use only a
cart or stand recommended by the
manufacturer or sold with the X24
LCD MONITOR.
Any heat source should maintain a
distance of at least 5 feet away from
the X24 LCD MONITOR, i.e. radiator,
heater, oven, amplifier etc. Do not
install the product too close to
anything that produces smoke or
moisture. Operating the product close
Never push any object into the
ventilation slots of the X24 LCD
MONITOR. Do not place any objects
on the top of the Product. It could
short circuit parts causing a fire or
electric shock. Never spill liquids on
the X24 LCD MONITOR.
The X24 LCD MONITOR should be
operated only from the type of power
source indicated on the label. If you
are not sure of the type of power
supplied to your home, consult your
dealer or local power company.
The power cable must be replaced
when using different voltage from that
specified in the User Manual. For
more information, contact your dealer.
•
•
•
•
SCEPTRE X24
Page5
Download from Www.Somanuals.com. All Manuals Search And Download.
•
The X24 LCD MONITOR is equipped
with a three-pronged grounded plug,
a plug with a third (grounding) pin.
This plug will fit only into a grounded
power outlet as a safety feature. If
your outlet does not accommodate
the three-wire plug, have an
immediately. Do not try to repair the
product yourself.
•
Avoid using dropped or damaged
appliances. If the product is dropped
and the housing is damaged, the
internal components may function
abnormally. Unplug the power cord
immediately and contact your dealer
for repair. Continued use of the
product may cause fire or electric
shock.
Do not install the product in an area
with heavy dust or high humidity.
Operating the product in
environments with heavy dust or high
humidity may cause fire or electric
shock.
Hold the power connector when
removing the power cable. Pulling the
power cable itself may damage the
wires inside the cable and cause fire
or electric shocks. When the product
will not be used for an extended
period of time, unplug the power
connector.
To avoid risk of electric shock, do not
touch the connector with wet hands.
Insert batteries in accordance with
instructions while using the remote
control. Incorrect polarities may cause
damage and leakage of the batteries,
operator injury and contamination the
remote control.
electrician install the correct outlet, or
use an adapter to ground the
appliance safely. Do not defeat the
safety purpose of the grounded plug.
Do not overload power strips and
extension cords. Overloading can
result in fire or electric shock.
The wall socket should be installed
near the equipment and should be
easily accessible.
Only the marked power source can be
used for the product. Any power
source other than the specified one
may cause fire or electric shock.
Do not touch the power cord during
thunderstorms. To avoid electric
shock, avoid handling the power cord
during electrical storms.
Unplug the unit during a lightning
storm or when it will not be used for a
long period of time. This will protect
the X24 LCD MONITOR from damage
due to power surges.
•
•
•
•
•
•
•
•
•
•
Do not attempt to repair or service the
product yourself. Opening or
removing the back cover may expose
you to high voltages, the risk of
electric shock, and other hazards. If
repair is required, please contact your
dealer and refer all servicing to
qualified service personnel.
Keep the product away from moisture.
Do not expose this appliance to rain
or moisture. If water penetrates into
the product, unplug the power cord
and contact your dealer. Continuous
use in this case may result in fire or
electric shock.
•
If any of the following occurs please
contact the dealer:
o
The power connector fails or
frays.
o
Liquid sprays or any object
drops into the X24 LCD
MONITOR.
•
•
o
o
o
The Display is exposed to
rain or other moisture.
The Display is dropped or
damaged in any way.
The performance of the
Display changes
Do not use the product if any
abnormality occurs. If any smoke or
odor becomes apparent, unplug the
power cord and contact your dealer
substantially.
•
Operating environment: Temperature:
5°C ~ 35°C, Humidity: 10% to 90%
non-condensing, Altitude: 0~10,000 ft.
Page6
SCEPTRE X24
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Important Information...................................................................... 1
FCC Compliance Statement............................................................ 2
Important Information...................................................................... 4
Tips and Safety Precautions ........................................................... 5
Table of Contents............................................................................ 7
Opening the Package ................................................................... 10
Package Contents......................................................................... 10
Optional Accessories .................................................................... 10
Installing the Base..........................................................................11
Setting Up Your Monitor................................................................ 12
Mounting Preparations.................................................................. 13
Identifying Front and Rear Panel .................................................. 15
Front View.............................................................................. 15
Side View Control Buttons ..................................................... 16
Side View Tilt Angle ............................................................... 17
Rear View .............................................................................. 18
Rear View Connections ......................................................... 19
Understanding Your Cables & Connections........................... 20
Connecting the LCD to Your PC.................................................... 21
If You Have DVI Connection on Your Video Card…............... 21
If You Have VGA Connection on Your Video Card….............. 22
Connecting the LCD to Your Video Device.................................... 23
If You Have HDMI Connection on Your DVD Player…........... 23
If You Have HDMI Connection on Your HD Box… ................. 24
If You Have HDMI Connection on PlayStation® 3… .............. 25
If You Have VGA Connection on Xbox 360™…..................... 26
If You Have Component Connection on Your DVD Player….. 27
If You Have Component Connection on Your HD Box…........ 28
If You Have Component Connection on PlayStation® 3…..... 29
If You Have Component Connection on Xbox 360™….......... 30
Connecting the LCD with (optional) HDMI .................................... 31
SCEPTRE X24
Page7
Download from Www.Somanuals.com. All Manuals Search And Download.
If You Have HDMI Connection on Your DVD Player…........... 31
If You Have HDMI Connection on Your HD Box… ................. 32
If You Have HDMI Connection on PlayStation® 3… .............. 33
Connections to PC on the LCD with (optional) HDMI.................... 34
If You Have DVI Connection on Your Video Card…............... 34
If You Have VGA Connection on Your Video Card….............. 35
On Screen Display (OSD) Menu................................................... 36
AUTO ADJUST ...................................................................... 36
LUMINANCE.......................................................................... 37
GEOMETRY .......................................................................... 38
COLOR.................................................................................. 40
VOLUME (optional)................................................................ 41
OSD....................................................................................... 42
LANGUAGE........................................................................... 42
RECALL................................................................................. 43
MISCELLANEOUS ................................................................ 44
EXIT....................................................................................... 44
Supported PC Resolution.............................................................. 45
Supported Video Resolution ......................................................... 46
Troubleshooting ............................................................................ 46
How do I clean the LCD? .............................................................. 49
Specification.................................................................................. 50
Call Us If You Need Help!.............................................................. 52
LIMITED PRODUCT WARRANTY................................................ 53
Disclaimer & Copyright Information............................................... 55
Page8
SCEPTRE X24
Download from Www.Somanuals.com. All Manuals Search And Download.
Dear SCEPTRE Customer,
Congratulations on your new SCEPTRE monitor purchase. Thank you for your
support. To ensure safety and many years of trouble free operation of your LCD
monitor, please read the manual carefully before making any adjustments, and
keep them in a safe place for future reference. We hope you enjoy your new
SCEPTRE monitor.
For technical assistance, please call 1800-788-2878 and select option 3 or
For all other inquiries, please call 1800-788-2878 and select option 4 or email
We recommend you register your SCEPTRE monitor with the enclosed
registration card and mail it in. For peace of mind and to protect your investment
beyond the standard warranty, SCEPTRE offers a two year extended warranty
service for your LCD monitor. This plan gives additional coverage once your
standard warranty period runs out. Please call our customer service group to
purchase the extended warranty.
SCEPTRE X24
Page9
Download from Www.Somanuals.com. All Manuals Search And Download.
Opening the Package
The SCEPTRE X24 is packaged in a carton together with standard accessories. The weight of the
LCD display is approximately 13.1 lbs. Since the LCD panel can be easily scratched or broken, please
handle the product gently. Never place the unit on a surface with the glass facing downwards unless it
is on a protective padding. When opening the carton, make sure the product is in good condition and
that all the standard accessories and items are included. After unpacking your LCD monitor, be sure to
save the original box and all packing materials for future shipping needs.
Package Contents
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Monitor Display x 1
User Manual x 1
Warranty Card x 1
Power Cord x 1
VGA Cable x 1
Optional Accessories
ꢀ
ꢀ
ꢀ
ꢀ
HDMI – DVI Video Conversion Cable
VGA – YPbPr Video Conversion Cable
3.5 mm Jack Audio Cable x 1
DVI Cable x 1
You can order the optional accessories from SCEPTRE directly. Please contact SCEPTRE
customer service for further instructions.
Page10
SCEPTRE X24
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Base
1. Please place the base on a flat surface (i.e. table). Hold the monitor directly
90 degrees above the base. Connect the monitor to the base by inserting the
monitor into the base.
2. After the monitor is connected to the base, take a look at the bottom of the
base. In the square opening of the metal plate, move the two plastic plates
outwards to lock the stand. Your monitor is ready for use.
SCEPTRE X24
Page11
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up Your Monitor
The following are general short steps to setup and use the monitor with your PC under the Microsoft
Windows XP operating system.
1. After you have installed the base, connect your VGA or DVI cord to both the monitor and PC and
turn on the PC and the monitor.
2. While booting up keep pressing F8 and choose the VGA mode option.
3. Under Windows, use your mouse to right click on the background with nothing selected. Left click
on the PROPERTIES option. Click on the SETTINGS tab.
4. Under SETTINGS change your resolution to 1920 x 1200 and click on APPLY. (if you are using
DVI as your connection click on OK and you are done, steps 6-10 are unnecessary)
5. Click on ADVANCED button, and then click on MONITOR tab. Under MONITOR make sure your
refresh rate is set to 60 Hz.
6. Click on OK on all windows to exit.
7. On the monitor, press the M button twice in succession to AUTO ADJUST.
8. Wait until the monitor finishes calibrating. Reboot your computer and your monitor is ready for
use.
9. [OPTIONAL] Because this monitor’s native resolution is very high, words may seem too small for
some users. Please follow steps 1-5. Afterwards, click on the GENERAL tab. In there you
can change the size of the words by changing from the option from “normal size” to “large size”.
Click on APPLY to finalize this selection. This will make the words bigger under Windows XP.
The following are general short steps to setup and use the monitor with your PC under the Microsoft
Windows VISTA operating system.
1. After you have installed the base, connect your VGA or DVI cord to both the monitor and PC and
turn on the PC and the monitor.
2. While booting up keep pressing F8 and choose the VGA mode option.
3. Under Windows, use your mouse to right click on the background with nothing selected. Left click
on the PERSONALIZE option. Click on the DISPLAY SETTINGS option.
4. Change your resolution to 1920 x 1200 and click on APPLY. (if you are using DVI as your
connection click on OK and you are done, steps 6-10 are unnecessary)
5. Click on ADVANCED SETTINGS button, and then click on MONITOR tab. Under MONITOR
make sure your refresh rate is set to 60 Hz.
6. Click on OK on all windows to exit.
7. On the monitor, press the M button twice in succession to AUTO ADJUST.
8. Wait until the monitor finishes calibrating. Reboot your computer and your monitor is ready for
use.
9.
[OPTIONAL] Because this monitor’s native resolution is very high, words may seem too small for
some users. Under Windows Vista please right click on the background with nothing selected
and select the PERSONALIZE option. Afterwards, click on the ADJUST FONT SIZE (DPI)
option on the left column and click on continue. In there you can change the size of the words by
changing from the option from “default scale” to “large scale”. This will make the words bigger
under Windows XP. Click on APPLY to finalize your selection.
Page12
SCEPTRE X24
Download from Www.Somanuals.com. All Manuals Search And Download.
Mounting Preparations
1. Place the monitor on a flat surface with cloth so the bezel does not get
scratched. Unscrew the 4 screws that lock the arm to the monitor.
2. Once the 4 screws are removed, the stand will slide off.
SCEPTRE X24
Page13
Download from Www.Somanuals.com. All Manuals Search And Download.
3. The monitor is ready for mounting.
Please note : The mounting pattern of the monitor is 100mm x 100mm
using M4 metric system screws. The screw depth of the mounting
pattern should not exceed 8mm.
Page14
SCEPTRE X24
Download from Www.Somanuals.com. All Manuals Search And Download.
Identifying Front and Rear Panel
Front View
POWER INDICATOR : If light is blue, the monitor is turned on. If the light is
blinking blue, the monitor is turned on but not receiving a signal from the
computer.
NATIVE RESOLUTION : This monitor’s clearest picture is produced under its
native resolution. The native resolution of the monitor is 1920 x 1200 at 60 Hz
refresh rate.
SCEPTRE X24
Page15
Download from Www.Somanuals.com. All Manuals Search And Download.
Side View Control Buttons
The following buttons are facing downwards in the center of the monitor.
– This button turns the monitor ON or OFF.
▲/ + – While in the OSD this button acts as a navigation button moving your
selection to the next one. If you entered the function this button acts as the
increase adjustment button. This button also functions as a BRIGHTNESS
adjustment hotkey.
M / ↵ – This is the MENU button. It opens the On Screen Display (OSD) Menu.
While in the OSD, this button also acts as the ENTER button and goes into the
function you want to adjust. While adjusting the actual value of options, press this
button again to exit.
▼/ – – While in the OSD this button acts as a navigation button moving your
selection to the previous one. If you entered the function this button acts as the
decrease adjustment button. This button also functions as a VOLUME
adjustment hotkey for X24s with HDMI port.
S – This button allows you choose the source of the monitor between VGA and
DVI.
Page16
SCEPTRE X24
Download from Www.Somanuals.com. All Manuals Search And Download.
Side View Tilt Angle
The LCD Monitor’s angle settings range from 0° to 10°.
SCEPTRE X24
Page17
Download from Www.Somanuals.com. All Manuals Search And Download.
Rear View
Mounting Specification : 100mm x 100mm using screw size
M4 metric system screws. The Depth of the mounting pattern should not exceed
8mm.
Page18
SCEPTRE X24
Download from Www.Somanuals.com. All Manuals Search And Download.
Rear View Connections
The following descriptions are from left to right.
Audio Line In (OPTIONAL)* – This connection is for linking to the PC’s line out
connection for transmitting audio signal to the monitor’s speakers. Do NOT
connect a headset or external speakers to this connection. You can also use this
connection for audio on game consoles or HD video devices by using a
3.5mm Mini-jack to Female RCA (red / white) audio conversion cable in
conjunction with a regular RCA (red / white) audio cable.
POWER – This plug is responsible for providing power to the monitor.
HDMI (OPTIONAL)* – HDMI stands for High Definition Multimedia Interface. This
is an optional port and is not available on all models. HDMI is an all digital
audio / video interface capable of transmitting uncompressed streams of high
definition video and audio. This connection is for HD DVD™ players,
Playstation®3, Blu-ray Disc™ players, HD satellite or cable boxes. The following
video resolutions are supported; 480i, 480p, 720p, 1080i, and 1080p.
DVI – DVI stands for Digital Video Interface. This connection is for computers to
send video signals to the monitor digitally so that colors and video are more
accurate and vivid. This connection supports HDCP video and regular video.
If you have a HDCP DVI or HDMI video device, you can use a conversion
cable to connect to this port. The following video resolutions are
supported; 480i, 480p, 720p, 1080i, and 1080p.
VGA – VGA stands for Video Graphics Array. This connection is for computers to
send video signals to the monitor by an analog signal. This method of connection
is the most commonly used connection. This port supports video through a
VGA to YPbPr video conversion cable. The following video resolutions are
supported; 480i, 480p, 720p, 1080i, and 1080p.
*The optional HDMI port is only available in certain models.
SCEPTRE X24
Page19
Download from Www.Somanuals.com. All Manuals Search And Download.
Understanding Your Cables & Connections
Cable
Name
Corresponding Connection
Picture
Cable Picture
DVI
(digital
video)
VGA
(analog
video)
3.5 mm
Mini-jack
(OPTIONAL)
HDMI*
(OPTIONAL)
Conversion
Cable Name
Conversion Cable Picture
HDMI to DVI
(optional
accessory)
3.5mm Mini-jack
to Female RCA
Audio (optional
accessory)
VGA to Female
Component
YPbPr (optional
accessory)
*The optional HDMI port is only available in certain models.
Page20
SCEPTRE X24
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the LCD to Your PC
If You Have DVI Connection on Your Video Card…
1. Make sure the power of X24 LCD MONITOR is turned off.
2. Obtain a DVI cable and connect to the DVI connection on your PC. Connect the other
end of the cable to your X24 LCD MONITOR.
3. Turn on the power of both the X24 LCD MONITOR and the PC.
Please Note :
•
Some video cards may have their DVI connection turned off by default. If you do
not get video, please consult your video card’s technical support.
The PC’s clearest picture is produced under 1920x1200 at 60Hz.
Since this monitor does not feature audio, you need to have your own
speaker setup for audio.
•
•
SCEPTRE X24
Page21
Download from Www.Somanuals.com. All Manuals Search And Download.
If You Have VGA Connection on Your Video Card…
1. Make sure the power of X24 LCD MONITOR is turned off.
2. If you were previously using a CRT (bulky) monitor, please hook up your old
monitor first and make sure your refresh rate is set to 60 Hz frequency before using the
X24 LCD MONITOR. You can find the refresh rate information and change it by RIGHT
CLICKING on the desktop with nothing selected. After you have right clicked, select the
PROPERTIES option. Click on the SETTINGS tab. Click on the ADVANCED button.
Click on the MONITOR tab. In that tab, change the refresh rate to 60Hz and click on
APPLY. After the refresh rate changed, please shut down the computer and monitor.
3. Obtain the VGA cable and connect to the VGA connection on your PC. Connect the
other end of the cable to your X24 LCD MONITOR.
4. Turn on the power of both the X24 LCD MONITOR and the PC.
Please Note :
•
•
The PC’s clearest picture is produced under 1920x1200 at 60Hz.
Since this monitor does not feature audio, you need to have your own
speaker setup for audio.
Page22
SCEPTRE X24
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the LCD to Your Video Device
If You Have HDMI Connection on Your DVD Player…
1. Make sure the power of X24 LCD MONITOR is turned off.
2. If you have HDMI connection on your DVD player, purchase a HDMI to DVI video
conversion cable and connect the HDMI end to the DVD player. Connect the DVI end
to the X24 LCD monitor. Make sure to match the shapes on both connections.
3. Turn on the X24 LCD MONITOR and your video device.
Please Note :
•
•
•
Please reference your DVD player manual or call the DVD player’s tech
support to make sure the proper settings are configured for your DVD player.
If you have a DVI out on your DVD player you can use a DVI cable to get
video.
Since this monitor does not feature audio, you need to have your own
speaker setup for audio.
SCEPTRE X24
Page23
Download from Www.Somanuals.com. All Manuals Search And Download.
If You Have HDMI Connection on Your HD Box…
1. Make sure the power of X24 LCD MONITOR is turned off.
2. If you have HDMI connection on your HD set-top box, purchase a HDMI to DVI
video conversion cable and connect the HDMI end to the HD set-top box. Connect the
DVI end to the X24 LCD monitor. Make sure you match the shapes on both
connections.
3. Turn on the X24 LCD MONITOR and your video device.
Please Note :
•
•
•
Please reference your set-top box manual to make sure the proper settings
are configured for your video device.
If you have a DVI out on your HD box, you can use a DVI cable to get
video.
Since this monitor does not feature audio, you need to have your own
speaker setup for audio.
Page24
SCEPTRE X24
Download from Www.Somanuals.com. All Manuals Search And Download.
If You Have HDMI Connection on PlayStation® 3…
1. Make sure the power of X24 LCD MONITOR is turned off.
2. If you have HDMI connection on your PlayStation® 3, purchase a HDMI to DVI
video conversion cable and connect the HDMI end to your PlayStation® 3 and connect
the DVI end to the X24 LCD monitor.
3. Turn on the X24 LCD MONITOR and your PlayStation® 3.
Please Note :
•
•
Please reference your PlayStation® 3’s manual to make sure the proper
settings are configured for your video device.
Since this monitor does not feature audio, you need to have your own
speaker setup for audio.
SCEPTRE X24
Page25
Download from Www.Somanuals.com. All Manuals Search And Download.
If You Have VGA Connection on Xbox 360™…
1. Make sure the power of X24 LCD MONITOR is turned off.
2. If you have VGA connection on your Xbox 360™, purchase an Xbox 360™ VGA
video cable and connect the proprietary single head to your Xbox 360™. Connect the
VGA end to the X24 LCD monitor. Make sure you match the shapes on all connections.
3. Turn on the X24 LCD MONITOR and your Xbox 360™.
4. Press MENU on the X24 and use the Auto Adjust function.
Please Note :
•
•
Please reference your Xbox 360™’s manual to make sure the proper
settings are configured for your video device.
Since this monitor does not feature audio, you need to have your own
speaker setup for audio.
Page26
SCEPTRE X24
Download from Www.Somanuals.com. All Manuals Search And Download.
If You Have Component Connection on Your DVD Player…
1. Make sure the power of X24 LCD monitor is turned off.
2. If you have component connection on your DVD player, purchase a VGA to female
component video conversion cable and connect the component end to regular
component cables and regular component cables to the DVD player. Connect the VGA
end to the X24 LCD monitor. Make sure you match the colors on the component
connection.
3. Turn on the X24 LCD MONITOR and your video device.
4. Use the side button ► to select VGA on the X24 LCD MONITOR.
Please Note :
•
•
Please reference your DVD player manual or call the DVD player’s tech
support to make sure the proper settings are configured for your video
device.
Since this monitor does not feature audio, you need to have your own
speaker setup for audio.
SCEPTRE X24
Page27
Download from Www.Somanuals.com. All Manuals Search And Download.
If You Have Component Connection on Your HD Box…
1. Make sure the power of X24 LCD MONITOR is turned off.
2. If you have component connection on your HD set-top box, purchase a VGA to female
component video conversion cable and connect the component end to regular component
cables and regular component cables to the HD set-top box. Connect the VGA end to the
X24 LCD monitor. Make sure you match the colors on the component connection.
3. Turn on the X24 LCD MONITOR and your video device.
4. Use the side button ► to select VGA on the X24 LCD MONITOR.
Please Note :
•
•
Please reference your set-top box manual to make sure the proper settings
are configured for your video device.
Since this monitor does not feature audio, you need to have your own
speaker setup for audio.
Page28
SCEPTRE X24
Download from Www.Somanuals.com. All Manuals Search And Download.
If You Have Component Connection on PlayStation® 3…
1. Make sure the power of X24 LCD MONITOR is turned off.
2. If you have component connection on your PlayStation® 3, purchase a VGA to female
component video conversion cable and connect the component end to your PlayStation® 3
component cables and the proprietary single head to your PlayStation® 3. Connect the VGA
end to the X24 LCD monitor. Make sure you match the colors on the component connection.
3. Turn on the X24 LCD MONITOR and your PlayStation® 3.
4. Use the side button ► to select VGA on the X24 LCD MONITOR.
Please Note :
•
•
Please reference your PlayStation® 3’s manual to make sure the proper
settings are configured for your video device.
Since this monitor does not feature audio, you need to have your own
speaker setup for audio.
SCEPTRE X24
Page29
Download from Www.Somanuals.com. All Manuals Search And Download.
If You Have Component Connection on Xbox 360™…
1. Make sure the power of X24 LCD MONITOR is turned off.
2. If you have component connection on your Xbox 360™, purchase a VGA to female
component video conversion cable and connect the component end to your Xbox 360™
component cables and the proprietary single head to your Xbox 360™. Connect the VGA
end to the X24 LCD monitor. Make sure you match the colors on the component connection.
3. Turn on the X24 LCD MONITOR and your Xbox 360™.
4. Use the side button ► to select VGA on the X24 LCD MONITOR.
Please Note :
•
•
Please reference your Xbox 360™’s manual to make sure the proper
settings are configured for your video device.
Since this monitor does not feature audio, you need to have your own
speaker setup for audio.
Page30
SCEPTRE X24
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the LCD with (optional) HDMI
If You Have HDMI Connection on Your DVD Player…
1. Make sure the power of X24 LCD MONITOR is turned off.
2. If you have HDMI connection on your DVD player, purchase a HDMI cable and
connect the HDMI end to the DVD player. Connect the other HDMI end to the X24 LCD
monitor. Make sure to match the shapes on both connections.
3. Turn on the X24 LCD MONITOR and your video device.
Please Note :
•
Please reference your DVD player manual or call the DVD player’s tech
support to make sure the proper settings are configured for your DVD player.
The optional HDMI port is only available in certain models.
If you do not hear sound, make sure your DVD player is outputting PCM
format for sound output. Consult the DVD player manual for further
instructions.
•
•
SCEPTRE X24
Page31
Download from Www.Somanuals.com. All Manuals Search And Download.
If You Have HDMI Connection on Your HD Box…
1. Make sure the power of X24 LCD MONITOR is turned off.
2. If you have HDMI connection on your HD set-top box, purchase a HDMI cable and
connect the HDMI end to the HD set-top box. Connect the other HDMI end to the X24
LCD monitor. Make sure you match the shapes on both connections.
3. Turn on the X24 LCD MONITOR and your video device.
Please Note :
•
Please reference your set-top box manual to make sure the proper settings
are configured for your video device.
•
•
The optional HDMI port is only available in certain models.
If you do not hear sound, make sure your HD set-top box is outputting PCM
format for sound output. Consult the HD set-top box manual for further
instructions.
Page32
SCEPTRE X24
Download from Www.Somanuals.com. All Manuals Search And Download.
If You Have HDMI Connection on PlayStation® 3…
1. Make sure the power of X24 LCD MONITOR is turned off.
2. If you have HDMI connection on your PlayStation® 3, purchase a HDMI cable and
connect the HDMI end to your PlayStation® 3 and connect the other HDMI end to the
X24 LCD monitor.
3. Turn on the X24 LCD MONITOR and your PlayStation® 3.
Please Note :
•
•
Please reference your PlayStation® 3’s manual to make sure the proper
settings are configured for your video device.
If you do not hear sound, make sure your PlayStation® 3 is outputting PCM
format for sound output. Consult the PlayStation® 3 manual for further
instructions.
•
The optional HDMI port is only available in certain models.
SCEPTRE X24
Page33
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections to PC on the LCD with (optional) HDMI
If You Have DVI Connection on Your Video Card…
1. Make sure the power of X24 LCD MONITOR is turned off.
2. Obtain a DVI cable and connect to the DVI connection on your PC. Connect the other
end of the cable to your X24 LCD MONITOR.
3. Obtain the audio cable and connect the 3.5 mm Mini-jack cable to the Audio Line In
connection of the monitor. Connect the other end of the 3.5 mm Mini-jack cable to your
PC’s audio line out connection.
4. Turn on the power of both the X24 LCD MONITOR and the PC.
Please Note :
•
•
Some video cards may have their DVI connection turned off by default. If you do
not get video, please consult your video card’s technical support.
The PC’s clearest picture is produced under 1920x1200 at 60Hz.
Page34
SCEPTRE X24
Download from Www.Somanuals.com. All Manuals Search And Download.
If You Have VGA Connection on Your Video Card…
1. Make sure the power of X24 LCD MONITOR is turned off.
2. If you were previously using a CRT (bulky) monitor, please hook up your old
monitor first and make sure your refresh rate is set to 60 Hz frequency before using the
X24 LCD MONITOR. You can find the refresh rate information and change it by RIGHT
CLICKING on the desktop with nothing selected. After you have right clicked, select the
PROPERTIES option. Click on the SETTINGS tab. Click on the ADVANCED button.
Click on the MONITOR tab. In that tab, change the refresh rate to 60Hz and click on
APPLY. After the refresh rate changed, please shut down the computer and monitor.
3. Obtain the VGA cable and connect to the VGA connection on your PC. Connect the
other end of the cable to your X24 LCD MONITOR.
4. Obtain the audio cable and connect the 3.5 mm Mini-jack cable to the Audio Line In
connection of the monitor. Connect the other end of the 3.5 mm Mini-jack cable to your
PC’s audio line out connection.
5. Turn on the power of both the X24 LCD MONITOR and the PC.
Please Note :
•
The PC’s clearest picture is produced under 1920x1200 at 60Hz.
SCEPTRE X24
Page35
Download from Www.Somanuals.com. All Manuals Search And Download.
On Screen Display (OSD) Menu
The OSD menu of the monitor provides various adjustments for the monitor such
as color, brightness, contrast, screen settings…..etc.
When you press the M button on the side of the monitor, the OSD screen will
appear. Select each of the functions with the (▲/+) or (▼/–) buttons. Use the M
button to enter each of the function or when you’re in the function already, use the
M button to select the option you want to adjust. Use the (▲/+) or (▼/–) buttons
to adjust each option’s values.
AUTO ADJUST
This function auto adjusts the clock and phase of the monitor when using VGA
cable so the monitor will sync better with the video card and produce a clearer
picture.
1. You can use this function by pressing M, then press (▲/+) or (▼/–) to
select Auto Adjust.
2. Once Auto Adjust is highlighted, press M again to use the function.
Please Note :
•
This function is only available under VGA.
Page36
SCEPTRE X24
Download from Www.Somanuals.com. All Manuals Search And Download.
LUMINANCE
This function adjusts the brightness and contrast of the LCD.
1. To use this function, press M to open the OSD then highlight
LUMINANCE function by pressing the (▲/+) or (▼/–) button.
2. Press M to enter the function.
3. Press (▲/+) or (▼/–) button to select BRIGHTNESS or CONTRAST to
adjust.
4. Press M to select the option you want to adjust.
5. Use the (▲/+) or (▼/–) button to adjust the values.
Please Note :
•
•
BRIGHTNESS adjusts the black level in a picture. If the value is
adjusted too high, the picture will look washed out. If too low, the
picture will not have much detail in dark colors.
CONTRAST adjusts the white levels in a picture. If the value is
adjusted too high, the picture will not have any details in bright
parts of the picture. If set too low, the picture will looked washed
out.
•
While DCR is turned on, BRIGHTNESS adjustments will be
disabled. If you see BRIGHTNESS function grayed out, you
will not be able to adjust it.
SCEPTRE X24
Page37
Download from Www.Somanuals.com. All Manuals Search And Download.
GEOMETRY
This function adjusts the screen’s image quality manually.
1. Press M to open the OSD then highlight GEOMETRY by pressing the
(▲/+) or (▼/–) buttons.
2. Press M to enter the function.
3. Press the (▲/+) or (▼/–) buttons to select the option you want to adjust.
Use M to enter the option and (▲/+) or (▼/–) buttons to adjust the
values.
a. H-POSITION – This option moves the picture left or right.
b. V-POSITION – This option moves the picture up or down.
c. PIXELCLOCK – This option adjusts the video signal in a large
increment to sync with the PC.
d. PHASE – This option adjusts the video signal in a small
increment to sync with the PC.
e. FORMAT – This option adjusts the signal syncing compatibility of
the LCD to different types of resolutions while using VGA
connection. When using VGA connection, you need to use
this option for changing the resolutions below then use
AUTO ADJUST after changing the format option.
Page38
SCEPTRE X24
Download from Www.Somanuals.com. All Manuals Search And Download.
i. 16:10 – This format sets the monitor for 16:10 ratio
resolutions such as 1440x900, 1680x1050, 1920x1200
resolution, making the screen clearer.
ii. 16:9 – This format sets up the monitor for 16:9 ratio
resolutions such as 1280x720, 1360x768, and
1920x1080 making the screen clearer.
iii. 4:3 – This format sets up the monitor for 4:3 ratio
resolutions such as 800x600, 1024x768, 1280x1024,
and 1600x1200 making the screen clearer.
Please Note :
•
•
•
It is always suggested for the USER to use the AUTO ADJUST
function instead of manual adjustments.
Make sure you AUTO ADJUST after changing the resolution and
the format.
LCDs will always be a little blurry when they’re not in their native
resolution. Make sure you are in the native resolution of the
monitor first before making screen setting adjustments.
This LCD’s native resolution is 1920x1200 at 60 Hz.
FORMAT options are only available under VGA.
•
•
SCEPTRE X24
Page39
Download from Www.Somanuals.com. All Manuals Search And Download.
COLOR
This function adjusts the overall balance of white colors in a picture in large
increments. Color temperature consists of 5800K, 6500K, and 9300K.
1. Press M to open the OSD then highlight COLOR by pressing the (▲/+)
or (▼/–) buttons.
2. Press M to enter the function.
3. Press (▲/+) or (▼/–) button to select the option you want to adjust to.
Use M to select the option.
a. 9300K – This option adjusts the white balance towards the blue
color giving the picture a bluish tint and cooler look.
b. 6500K – This option adjusts the white balance to give the picture
a no biased white color.
c. 5800K – This option adjusts the white balance towards the red
color giving the picture a reddish tint and warmer look.
d. USER PRESET – This option lets the user adjust the white
balance by tweaking the RED, GREEN, and BLUE color.
Page40
SCEPTRE X24
Download from Www.Somanuals.com. All Manuals Search And Download.
i. Use the (▲/+) or (▼/–) buttons to select the color you
want to adjust and press M to select it.
ii. Use the (▲/+) or (▼/–) button to adjust the values.
e. AUTO COLOR – This option automatically adjusts the overall
balance of white colors in a picture automatically.
VOLUME (optional)
This optional function changes the X24 LCD MONITOR’s speaker volume.
1. Press M to open the OSD then highlight OSD SETTING by pressing the
(▲/+) or (▼/–) buttons.
2. Press M to enter the function.
3. Press the (▲/+) or (▼/–) buttons to adjust the option.
Please Note :
•
The speakers are generic mini speakers and will not have full range
highs and lows. The volume will sometimes be considered very low
even at full depending on the sound card’s output power.
•
This function is only available on X24s with HDMI port.
SCEPTRE X24
Page41
Download from Www.Somanuals.com. All Manuals Search And Download.
OSD
This function adjusts the OSD’s display options.
1. Press M to open the OSD then highlight OSD by pressing the (▲/+) or (▼/–) buttons.
2. Press M to enter the function.
3. Press the (▲/+) or (▼/–) buttons to select the option you want to adjust and press M to enter
the option.
4. Use the (▲/+) or (▼/–) buttons to adjust the values.
a. H-POSITION – This option moves the OSD menu left or right.
b. V-POSITION – This option moves the OSD menu up or down.
c. OSD TIME – This option change the time which the OSD will remain on screen
while idle.
LANGUAGE
This function allows you to change the language of the OSD.
1. Press M to open the OSD then highlight LANGUAGE by pressing the (▲/+) or (▼/–)
buttons.
2. Press M to enter the function.
3. Press the (▲/+) or (▼/–) buttons to select the language you want to change to and press M
to finalize the change.
Please Note :
•
Changing the language of the OSD will alter all the messages and OSD language
of the monitor. There is no reset for this function.
Page42
SCEPTRE X24
Download from Www.Somanuals.com. All Manuals Search And Download.
RECALL
This function recalls adjustments to the monitor.
1. Press M to open the OSD then highlight RECALL by pressing the (▲/+)
or (▼/–) buttons.
2. Press M to enter the function.
3. Press the (▲/+) or (▼/–) buttons to select the option you want to recall.
4. Press M to enter the option and with the (▲/+) or (▼/–) buttons select
Yes to recall.
a. COLOR RECALL – recalls all settings of COLOR function.
b. RECALL ALL – recalls all settings besides COLOR function.
SCEPTRE X24
Page43
Download from Www.Somanuals.com. All Manuals Search And Download.
MISCELLANEOUS
This function adjusts many loose options inside the monitor.
1. Press M to open the OSD then highlight MISCELLANEOUS by pressing with the (▲/+) or
(▼/–) buttons.
2. Press M to enter the function.
3. Press with the (▲/+) or (▼/–) buttons to select the option you want to adjust and press M to
adjust the function.
4. Press the (▲/+) or (▼/–) buttons to adjust the value of the option.
i. SHARPNESS – This option adjusts the sharpness of the graphics and text.
ii. INPUT SELECT – This option lets you select the input you want.
iii. OVER DRIVE – This option helps increase pixel response time reducing
ghosting effects.
iv. DCR – This option turns dynamic contrast on or off.
v. DISPLAY INFORMATION – This option shows the monitor’s information
such as resolution and refresh rate.
Please Note :
•
•
You can switch sources easily by using the SOUCE button on the side of the
monitor.
The DCR function automatically controls the BRIGHTNESS of the monitor,
therefore, when this function is enabled, you will not be able to adjust the
values in the BRIGHTNESS function.
EXIT
This function exits the OSD menu.
1. Select the EXIT function with the (▲/+) or (▼/–) buttons and press M to
exit.
Page44
SCEPTRE X24
Download from Www.Somanuals.com. All Manuals Search And Download.
Supported PC Resolution
Vertical
Scanning
Frequency
(Hz)
Horizontal
Scanning
Frequency
(kHz)
Dot
Clock
(MHz)
STD
RES
MAC 13"
mode
MAC 17"
mode
MAC 18"
mode
640x480
1024x768
1152x870
30.24
80
66.67
74.93
75.06
35.00
60.24
68.68
100
DOS
DOS
DOS
640x350
720x400
640x480
640x480
640x480
800x600
800x600
800x600
832x624
1024x768
1024x768
1024x768
1152x864
1280x1024
1280x1024
1280x1024
1360x768
1440x900
1440x900
1680x1050
25.18
28.32
25.18
31.50
31.50
40
70.09
70.08
59.94
72.81
75
60.32
72.19
75
74.55
60
70.07
75.03
75
60
71.53
75
59.8
60
60
31.47
31.47
31.47
37.86
37.50
37.88
48.08
46.88
49.73
48.36
56.48
60.02
67.5
63.98
75.83
80
47.72
55.5
59.9
64.7
65.29
67.158
74.04
VESA
VESA
SVGA
VESA
VESA
VESA
XGA
VESA
VESA
VESA
VESA
IBM
VESA
VESA
WSXGA
WSXGA
VESA
VESA
VESA
VESA
50
49.5
57.28
65
75
78.75
108
108
128.
135
84.75
88.75
106.5
119
59.883
59.954
60
1680x1050 146.25
1920x1080
1920x1200
173
154
60
*Once a mode is optimized, there is no need to make any further adjustment as long as the VGA card
remains unchanged. **Specifications are subject to change without notice.
SCEPTRE X24
Page45
Download from Www.Somanuals.com. All Manuals Search And Download.
Supported Video Resolution
Vertical
Scanning
Frequency
(Hz)
Horizontal
Scanning
Frequency
(kHz)
Item
Standards
1
2
3
4
5
720x480i
720x480P
29.97
59.94
60
15.73
31.46
1280x720P
1920x1080i
1920x1080P
45
30
33.75
60
67.5
Troubleshooting
Problem
Possible solutions
To stabilize and clarify your display, use the AUTO ADJUST function or
change the resolution to the display’s optimal setting 1920 X 1200 at
60Hz, then AUTO ADJUST.
DISPLAY IS UNCLEAR
AND UNSTABLE
Make sure you switched to the correct source. Check both sources to
see video is on the other source. Check your video cable. It might be
corrupt. Swap out the video cable for another one to see if the monitor
will work. Check your power plug. See if it is fully plugged in on both
the monitor and the wall.
THERE IS NO LCD
DISPLAY or SCREEN
SAYS NO VIDEO
If you have a CRT monitor, please connect the CRT monitor to the
computer and change the refresh rate down to 60Hz via your video
card’s display settings menu. After the setting of 60Hz has been
change you can then use the LCD on the computer.
1. To change the setting go to display settings by right clicking
on your desktop with nothing selected. Choose the
PROPERTIES option.
MONITOR SAYS
“SIGNAL OUT OF
RANGE”
2. Click on the SETTINGS tab, verify the resolution is NOT
higher than 1920x1200, click on the ADVANCED button.
3. Click on the MONITOR tab and change the refresh rate to
60Hz.
4. Click on OK 2-3 times to finalize your change.
If you do NOT have a CRT monitor or it’s already broken, please make
sure both the X24 monitor and your computer is turned off.
Page46
SCEPTRE X24
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem
Possible solutions (continued)
1. Turn on the LCD and the computer.
2. While the computer is turned on, press the “F8” key on your
keyboard continuously until a selection menu appears and
select the “Safe Mode” option.
3. When you’ve entered Safe Mode please uninstall any video
card driver and monitor driver by using either the “Add /
Remove Programs” icon or going into “System
4. Properties” and manually removing anything under
“Monitors” and “Display Adapters”. After removing all the
drivers, please reboot your computer and you should be
able to see windows. Please install your monitor driver
first, then your video card driver. Please remember to
make sure your refresh rate should be at 60Hz.
If you are using DVI, please try out VGA to see if you are able to
achieve that resolution. If your VGA can then, your video card’s DVI
cannot support widescreen resolutions.
I CANNOT GET THE
RESOLUTION
1920X1200
Sometimes your video card will not read the monitor correctly and will
not allow you to achieve the resolution you want. Rebooting your
computer will solve the situation.
You can also make sure your video card’s video drivers are up to date.
You can find what video card you have by clicking on START then
RUN. Type in “DXDIAG”. When the diagnostic window pops up, click
on the DISPLAY tab. The program will tell you what video chipset you
have. Copy that name then search it with an online search engine like
GOOGLE™. Find your video card company’s web address and search
for newer drivers. If updating your drivers does not work, you probably
have one of the older video cards and cannot achieve a widescreen
resolution. You’ll need to upgrade your video card to a newer one.
THERE IS NO SOUND
COMING OUT OF THE
MONITOR
The non-HDMI monitor does not contain any audio hook ups or any
speakers. You are responsible for obtaining and hooking up
independent speakers to your computer or video device.
Sometimes having older video cards this type of problem might
happen due to newer LCDs having to provide HD video capability and
not being fully compatible with older video cards. You can try
adjusting the contrast to a lower value and adjust the brightness to
compensate.
THE VIDEO IS TOO
BRIGHT NO MATTER
WHAT I ADJUST
Are you using the monitor’s native resolution? If not you’ll need to
switch resolution to the native 1920x1200 at 60 Hz to make the words
clearer. If you’re using VGA please do not forget to AUTO ADJUST
and to use FORMAT under OSD.
THE WORDS AND
VIDEO ARE TOO
BLURRY
If the words are still blurry, please try enabling or disabling CLEAR
TYPE function from windows.
SCEPTRE X24
Page47
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem
Possible solutions (continued)
Sometimes the colors are not correct because your VGA or DVI cable
is loose or corrupt. Please try reconnecting your cable or swap out
your current cable to see if the problem persists. Afterwards please
use the AUTO COLOR function inside the OSD to recalibrate the
colors.
THE COLORS ARE
NOT CORRECT
At the native resolution of 1920x1080, some people might feel that the
THE WORDS ARE TOO words are too small to read. You can change the size of the words in
SMALL AT 1920X1080
Windows Operating System via its display properties.
For Windows XP
1. Right click on the background with nothing selected. Left
click on the PROPERTIES option.
2. Click on the SETTINGS tab.
3. Under SETTINGS, click on the ADVANCED button.
4. Under GENERAL tab, change the size of the words by
selecting the option NORMAL SIZE and change it to LARGE
SIZE.
5. Click on OK on all windows to exit.
6. Once you have finished rebooting, the computer is ready for
use.
For Windows VISTA
1. Right click on the background with nothing selected. Left
click on the PERSONALIZE option.
2. Click on ADJUST FONT SIZE (DPI) option on the left
column and
3. Click on CONTINUE.
4. In there you can change the size of the words by changing
from the option DEFAULT SCALE to LARGE SCALE.
5. Click on APPLY to finalize your selection.
6. Once you have finished rebooting, the computer is ready for
use.
I CANNOT ADJUST
THE BRIGHTNESS
SETTINGS
Check the OSD to see if DCR is turned on. If DCR is turned on, you
will not be able to adjust the BRIGHTNESS option. With DCR turned
off you will be able to adjust those options.
MY X24 DOES NOT
The HDMI port is an optional design that is only available in certain
HAVE THE HDMI PORT models.
THE X24 WITH HDMI
PORT IS TOO LOW OR
HAS NOTHING BUT
STATIC
If your sound has static, check your video device to make sure that the
digital sound output is on PCM.
If your sound is too low, this might be because the HDMI’s sound
output is a pure digital signal. This is the design of digital sound
signals and you’ll need to have an independent set of self powered
speakers to hear well.
Page48
SCEPTRE X24
Download from Www.Somanuals.com. All Manuals Search And Download.
How do I clean the LCD?
IMPORTANT
1. The power cable has to be removed from the socket before cleaning
the TV.
2. Do not use volatile solvent (alcohol, rosin, and toluene) to clean the
TV. These types of chemicals might damage the housing and the
LCD glass.
Cleaning the bezel
1. Use a 100% cotton cloth or micro-fiber cloth for cleaning.
2. If the bezel is dirty to the point where you cannot simply dry wipe it,
please lightly dampen the wiping material with clean water and wipe
again. Wipe the display with a dry micro-fiber cloth or 100% cotton
cloth afterwards.
Please Note :
•
Make sure you wring the water out of the cloth before
cleaning the bezel in order to prevent water from
penetrating into the electronics.
Cleaning the Screen
1. Use a 100% cotton cloth or micro-fiber cloth for cleaning.
2. The LCD screen glass is extremely fragile. Do not scrape it with any
material. Do not press or tap the screen to avoid cracking. When
the screen is dirty to the point where you cannot simply dry wipe it,
please lightly dampen the wiping material with clean water and wipe
again. Wipe the display with a dry micro-fiber cloth or 100% cotton
cloth afterwards.
SCEPTRE X24
Page49
Download from Www.Somanuals.com. All Manuals Search And Download.
Specification
Display panel
Illustration
Item
518.4 mm x 324 mm Display Area
diagonal 24 inches
Active Area / Screen Size
Aspect Ratio
Resolution
Brightness
Contrast
Widescreen 16 : 10
Native: 1920 x 1200
300 nits
4000:1 (DCR) 1000:1 (NATIVE)
2ms (Gray to Gray)
Response Time
Typical 160/160 Degree
(Horizontal/Vertical)
Viewing Angle
Lamp Life of Backlight
> 50,000hrs
Monitor Display
22.3(W)X15.3(H)X8(D) inches
546.35(W)X374.85(H)X196(D) mm
13.12 lbs (5.96 Kgs)
Dimension
Weight
Power input
100V to 240VAC @ 50/60 Hz Max, 50W
Features
(1)Audio (optional)
Speakers output
(2) General
2w + 2w
Page50
SCEPTRE X24
Download from Www.Somanuals.com. All Manuals Search And Download.
Features (continued)
480i @ 30 Hz
480p @ 60 Hz
VIDEO SUPPORT
PC timing
720p @ 60 Hz
1080i @ 30 Hz
1080p @ 60 Hz
640 * 350 @ 70 Hz
720 * 400 @ 70 Hz
640 * 480 @ 60, 70, 75 Hz
800 * 600 @ 60, 70, 75 Hz
1024 * 768 @ 60, 70, 75 Hz
1152 * 864 @ 75 Hz
1280 * 720 @ 60 Hz
1280 * 768 @ 60 Hz
1280 * 1024 @ 60, 70 ,75 Hz
1360 * 768 @ 60 Hz
1440 * 900 @ 60 Hz
1680 * 1050 @ 60 Hz
1920 * 1080 @ 60 Hz
1920 * 1200 @ 60 Hz
VGA (YPbPr), DVI (HDCP), HDMI (optional)
(5)I/O
Audio Line In (optional)
*Specifications are subject to change without notice.
SCEPTRE X24
Page51
Download from Www.Somanuals.com. All Manuals Search And Download.
Call Us If You Need Help!
Products are often returned due to a technical problem rather than a defective
product that may result in unnecessary shipping charges billed to you. Our
trained support personnel can often resolve the problem over the phone or email.
For more information on warranty services or repairs after the warranty period,
please contact our support department at the number below.
For technical help, contact our SCEPTRE Technical Support Group via email or
phone. Please have your SCEPTRE p/n number, serial number, and date of
purchase available before you call.
Customer Service Email : [email protected]
TEL : 626-217-1022
Operation Hours : Mon - Fri at 8:30 AM – 5:30 PM (PST)
16800 East Gale Ave.
City of Industry, CA 91745
TEL : 626-369-3698
FAX : 626-855-5711
Website : www.SCEPTRE.com
Page52
SCEPTRE X24
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITED PRODUCT WARRANTY
Please read this warranty card carefully, it is a “ONE-YEAR LIMITED WARRANTY” on parts and labor
and is only valid when purchased from an Authorized Reseller, only on new and non-refurbished
product, and available to customers in the Continental US, Alaska, Hawaii and Puerto Rico. See below
for the SCEPTRE Extended Service warranty.
SCEPTRE’s Responsibility
SCEPTRE Displays purchased in the United States are warranted to be free from defects in materials
or workmanship for a period of one (1) year from the date of their original retail purchase. If the unit
fails to conform to this warranty, we will service the monitor using new or refurbished parts.
Service Labor
During a period of one (1) year from the effective warranty date, SCEPTRE will provide, when needed,
service labor to repair a manufacturing defect at SCEPTRE’s own Service Center. To obtain warranty
service in the Untied States, you must first call our Customer Support at (800) 788-2878. The
determination of service will be made by SCEPTRE Customer Support. PLEASE DO NOT
RETURN YOUR UNIT TO SCEPTRE WITHOUT PRIOR AUTHORIZATION.
Parts
New or remanufactured replacements for defective parts will be used for repairs by SCEPTRE at its
designated Service Center for one (1) year from the effective warranty date. Such replacement parts
are warranted for the remaining portion of the original warranty period.
Service
During the one (1) year warranty period, SCEPTRE will, at its option and sole discretion, repair or
replace defective parts, including replacement of the entire Panel. The Customer will be required to
ship the unit to the Service Center indicated at the time Customer Support is contacted to make the
necessary repairs, you are responsible for all transportation charges to the service facility. SCEPTRE
is NOT responsible for the de-installation or re-installation of the unit.
Packaging and Shipping Instruction
When you send the product to an authorized SCEPTRE service facility you must use the original
carton box and packing material or an equivalent as designated by SCEPTRE.
Not Covered
This warranty does not cover defects, malfunctions or failures resulting from shipping or transit
accidents, abuse, misuse, operation contrary to furnished instructions, operation on incorrect power
supplies, operation with faulty associated equipment, modification, alteration, improper servicing,
tampering or normal wear and tear or TVs on which the serial number has been removed or defaced.
Image Sticking caused by operating at excessive brightness levels for extended periods or
mishandling are not covered by this warranty.
ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE SHALL BE LIMITED IN
DURATION TO THE PERIOD OF TIME SET FORTH ABOVE. OUR LIABILITY FOR ANY AND ALL
LOSSES AND DAMAGES RESULTING FROM ANY CAUSE WHATSOEVER, INCLUDING OUR
NEGLIGENCE, ALLEGED DAMAGE OR DEFECTIVE GOODS, WHETHER SUCH DEFECTS ARE
DISCOVERABLE OR LATENT, SHALL IN NO EVENT EXCEED THE PURCHASE PRICE OF THE
DISPLAY. WE SHALL NOT BE RESPONSIBLE FOR LOSS OF USE, COMMERCIAL LOSS OR
OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES. SOME STATES DO NOT ALLOW
SCEPTRE X24
Page53
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OR
LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS
OR EXCLUSIONS MAY NOT APPLY TO YOU. This warranty gives you specific legal rights, and you
may also have other rights which vary from state to state. This is the only warranty applicable; no one
is authorized to extend or modify it or to grant any other warranty.
SCEPTRE retains the right to assess all warranty claims and to determine if damages are covered by
the warranty. In case of a claim that is not covered by the warranty, you will be contacted to determine
whether SCEPTRE should repair the damage for a fee or whether the product should be returned to
you as received by the repair center.
Dead Pixel Policy
There are millions of pixels on a LCD screen. Therefore, there is industry standard specification
regarding dead or bad pixels. SCEPTRE sets limit on the LCD at 3 dead pixels in a cluster adjacent to
each other, 5 dead pixels of the same brightness and color, or 8 total in a combination of color and
brightness of dead pixels. Any number of dead or bad pixels under the limit is considered normal
specification.
Owner’s Responsibility
Effective Warranty Date
Warranty begins on the date of sale to the end user. To ensure warranty service, keep the dated bill or
sale receipt as evidence of the purchase date.
Warranty Service
For warranty service information, contact SCEPTRE Customer Support at (800) 788-2878, 8:30 am to
(see above) will be provided without charge. Other service is at the owner’s expense. You must
provide the model, serial number and date of purchase. Before you ask for warranty service, read your
User Manual. You might avoid a service call.
Warranty conditions are subject to change, for latest Warranty Terms and Conditions and additional
SCEPTRE Extended Warranty
Protect your investment beyond the standard warranty and experience piece of mind with SCEPTRE’s
Extended Service Warranty.
1-800-788-2878 to purchase a plan today.
Page54
SCEPTRE X24
Download from Www.Somanuals.com. All Manuals Search And Download.
Disclaimer & Copyright Information
Microsoft, Windows are registered trademarks of Microsoft Corporation in the
United States and other countries.
Xbox 360™ is a registered trademark or trademark of Microsoft Corporation in the
United States and other countries.
PlayStation® 3 is a registered trademark or trademark of Sony Computer
Entertainment Inc. in the United States and other countries.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing LLC.
HDCP is a trademark or registered trademark of Digital Content Protection, LLC.
HD DVD and DVD are trademarks of the DVD Format/Logo Licensing
Corporation.
Blu-ray Disc is a registered trademark of the Blu-ray Disc Association.
Sceptre, Inc. shall not be liable for technical or editorial errors or omissions
contained herein; nor for incidental or consequential damages resulting from
furnishing this material, or the performance or use of this product.
In the interest of continuing product improvement, Sceptre, Inc. reserves the right
to change product specifications without notice. Information in this document may
change without notice.
No part of this document may be copied, reproduced, or transmitted by any
means, for any purpose without prior written permission from Sceptre, Inc..
SCEPTRE is a trademark or registered trademark of Sceptre Group.
SCEPTRE X24
Page55
Download from Www.Somanuals.com. All Manuals Search And Download.
|