|
X20WG-Naga
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
To comply with the limits for an FCC Class B computing device, always
use the shielded signal cord supplied with this unit.
The Federal Communications Commission warns that changes or
modifications of the unit not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
CE mark for Class B ITE (Following European standard EN55022/1998; EN61000-
3-2/1995; EN61000-3-3/1995, EN55024/1998, EN60950/1992+A1+A2+A3+A4+A11)
Radio Frequency Interference Statement
Warning:
This is a Class B product. In a domestic environment, this product may
cause radio interference in which case the user may be required to take
adequate measures.
Canadian Doc Notice
For Class B Computing Devices
This digital apparatus does not exceed the Class B limits for radio noise
emissions from digital apparatus as set out in the Radio Interference
Regulation of the Canadian Department of Communications.
“Le présent appareil numérique n’èmet pas de bruits radioélectriques
dépassant les limites applicables aux appareils numériques de la class B
prescrites dans le Règlement sur le brouillage radioélectrique édicté par
le ministère des Communications du Canada."
ii
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE OF CONTENTS
TABLE OF CONTENTS ..........................................................................................III
Your New LCD Monitor
1
1
3
5
6
Unpacking
Identifying Components
Adjusting the Tilting Angle
Connecting AC Power and Video Cable
Power Management System
How to install the detacheable stand
The LCD Monitor’s Control Panel
Adjusting the Monitor’s Display
TFT LCD Monitor Specifications
Supported Timing
6
7
8
9
15
17
19
Troubleshooting
iii
Download from Www.Somanuals.com. All Manuals Search And Download.
The LCD Monitor
Your New LCD Monitor
Your LCD Monitor has been designed to be versatile, ergonomic and
user-friendly. The LCD Monitor is capable of displaying most
standards, from 640x350 VGA to 1680x1050 WSXGA+. The digital
controls located on the front panel allow the user to easily adjust the
Monitor’s display parameters, and the LCD Monitor’s small footprint
gives you more room in your workspace for other peripherals.
Lightweight and compact, the LCD Monitor is the perfect solution for
users on the go. You can use the LCD Monitor for everything from
making business presentations to playing computer games. The
Monitor also has a wall-mountable stand for added convenience.
The architecture of the LCD Monitor incorporates an LCD panel that
produces a clear display with low radiation emission. And with its low
power consumption, the LCD Monitor helps you reduce your power bill.
Unpacking
Before unpacking your LCD Monitor, prepare a suitable workspace
for your LCD Monitor and computer. Look for a stable, level and clean
surface near a wall outlet. Even though the LCD Monitor uses very
little power, you should put it in a location, which allows sufficient
airflow to ensure that the LCD Monitor and your computer do not
overheat. Set up your LCD Monitor so that the panel is not facing a
window where sunlight often comes in. The glare caused by sunlight
reflecting off of the LCD Monitor’s screen will make it difficult to use
the Monitor for viewing.
1
Rev.3
Download from Www.Somanuals.com. All Manuals Search And Download.
Note: Using a computer for an extended period of time with a poor workstation
set-up and incorrect working habits can cause health problems. The science of
ergonomics studies the relationship between health and a suitable working
environment. There is a section on ergonomics at the end of this chapter. For
more information on ergonomics, contact your nearest computer bookstore, or
local library. The Internet also has information on this and other subjects.
If you previously were using a CRT monitor instead of a LCD monitor,
please do not connect the LCD monitor to your computer yet. Please
use the CRT monitor and turn on your computer. Make sure your video
card’s refresh rate is at 60hz in the Display Setting’s Advance Menu
under the Display Adapter tab. Once that is achieved you can then turn
off the computer and plug your new LCD monitor in
After unpacking your LCD monitor, make sure the following items are included
in the box and are in good condition:
•
•
•
•
•
LCD monitor
Power Cord
Monitor-To-PC Analog signal cable 15pin
1.5M stereo Jack Audio Cable
User’s manual
¾
Monitor-To-PC DVI signal cable – Option
If you find that any item to be missing or appear to be damaged,
contact your dealer immediately. DO NOT throw away the packing
material or shipping carton in case you need to ship or store the LCD
monitor in the future.
2
Rev.3
Download from Www.Somanuals.com. All Manuals Search And Download.
Identifying Components
A. The LCD Monitor — Front View
3
1
2
4
Figure 1-1: The LCD Monitor Front View
1. Sceptre logo Indicator
This foursquare LED indicator blue lit when the power is on
and red lit when the LCD monitor is in power-saving mode.
2. Monitor Stand
3. LCD Screen
The LCD monitor is a 20.1-inch TFT 1680 x 1050 Wide
WSXGA+ screen.
4. LCD Monitor Control Panel
Refer to Chapter 2 for more details.
3
Rev.3
Download from Www.Somanuals.com. All Manuals Search And Download.
B. "Hot Keys" for Quick Adjustment of Monitor Settings
Figure 1-2: "Hot Keys"
1. Brightness adjustment " Hot Key ":
Press this Z button to allow you to
adjust the brightness of the LCD
Monitor directly
<
> 50
2. Source select “ Hot Key :
Source D-Sub
Source DVI
Press S button to allow you to change
the input source between DVI port and
RGB port, if the screen can’t detect
signal, then it will switch to the next
automatically
3. Volume adjustment “ Hot Key ”
Press this Y button to allow you to
adjust the volume of the LCD Monitor
directly
<
> 50
4. Auto adjustment “ Hot Key “
Press this - button to allow you to do
the auto adjustment to get the
optimized view
( For VGA port only, DVI port can’t
adjustment )
4
Rev.3
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Tilting Angle
The LCD Monitor’s angle settings range from 0° to 10°.
0 to 10
Figure 1-3: Tilting the Monitor
5
Rev.3
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting AC Power and PC Video Cable
Note: Turn off your PC and the LCD monitor before connecting your LCD
monitor to the computer.
AC-IN
Audio
DVI
VGA
AC Outlet
(Wall Socket)
Monitor Power Cord
Figure 1-4: PC conenction
Power Management System
This LCD Monitor complies with the VESA DPMS power management
proposal.
When the LCD Monitor is in power-saving mode or detects an incorrect
timing, the monitor screen will be blank and the power LED indicator change
to red lit.
6
Rev.3
Download from Www.Somanuals.com. All Manuals Search And Download.
How to install the detacheable stand:
Please see the below drawing.
7
Rev.3
Download from Www.Somanuals.com. All Manuals Search And Download.
The Display Controls
The LCD Monitor’s Control Panel
Figure 2-1: The Control Panel
1. Hot key button Y &Z
These buttons let you to adjustment volume and brightness of
the LCD Monitor directly
2. Cursor Movement & Adjustment button - & +
These buttons let you move vertical across your settings
item or to change the setting value.
3. Menu: OSD Menu button
Press this button to display the OSD (On-Screen Display)
Menu or move to next sub-menu
4. Source: Source select hot key
Press this button to change the input source from D-Sub to
DVI
5.
Power Switch
This button lets you turn power for the LCD monitor ON or
OFF.
8
Rev.3
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Monitor’s Display
OSD Main Menu
1. Pressing the OSD Menu button causes the screen below to appear.
2. Use the - & + key to select the desired group, then press Menu key
to the sub-menu
3. Repeat step 2 to select the changed item, then press - & + to change the
value.
4. Move to Exit item, Press the Menu to return to the sub-menu item 3 to
another adjustment
The OSD Main Menu
OSD Main SCREEN
9
Rev.3
Download from Www.Somanuals.com. All Manuals Search And Download.
Auto Adjust Option
The Auto Adjust option lets the monitor determine and
select the settings that are most appropriate for your
system requirements.
Note: it only apply for Analog RGB input
Luminance -- Brightness and Contrast Adjustment.
Brightness -- Adjusts the Brightness value
Contrast -- Adjusts the Contrast value
Exit -- Return to the previous Menu
Geometry -- Display Quality Adjustment
( For VGA port only, DVI port can’t adjustment )
H. Position -- Moves the whole screen right or left
V. Position -- Moves the whole screen up or down
Pixel Clock -- Changes the screen viewing size
Phase -- Adjusts phase tracking to reduce display flicker
Exit -- Return to the previous Menu
10
Rev.3
Download from Www.Somanuals.com. All Manuals Search And Download.
Color -- Color Temperature Adjustment
Auto Color -- To adjust automatically the white balance display.
9300 -- Sets the color temperature to 9300K
6500 -- Sets the color temperature to 6500K
5800 -- Sets the color temperature to 5800K
User Preset
Red -- change Red gain for the color temperature
Green -- change Green gain for the color temperature
Blue -- change Blue gain for the color temperature
Exit -- Return to the previous Menu
Exit -- Return to the previous Menu
Volume -- Adjust the speaker volume
11
Rev.3
Download from Www.Somanuals.com. All Manuals Search And Download.
OSD – OSD Adjustment
H. Position -- Moves the OSD menu horizontally
V. Position -- Moves the OSD menu vertically
OSD Time -- Sets the OSD time ( 0 to 60 second )
Exit -- Return to the previous Menu
Language -- The supported languages include English, French,
German, Italian, Spanish, Japanese, Traditional
Chinese and Simple Chinese
Recall
Color Recall -- To reset the color settings to the factory default.
Recall All -- To reset the entire settings to the factory default.
Exit -- Return to the previous Menu
12
Rev.3
Download from Www.Somanuals.com. All Manuals Search And Download.
Miscellaneous
Input selection -- To switch between analog and DVI port for
PC signal input
Sharpness -- The sharpness value can be set at 1. 2. 3. 4. 5.
the factory default at 3.
Display Information
Exit -- Return to the previous Menu
Exit – Exit the OSD screen
13
Rev.3
Download from Www.Somanuals.com. All Manuals Search And Download.
Note:
1) No signal detected
When the monitor is ON and there is no video signal received, the following
message will be displayed
No signal detected!
2) Signal out of range
When the frequency range of the signal is out of the Monitor’s specifications,
(over 75HZ) the display will show the following message
Out of Range!
14
Rev.3
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix A
TFT LCD Monitor Specifications
Item
Specification
LCD Panel
20.1" WSXGA+
Control
Functions
Power
Software Power switch with LED indicator
(ON/OFF)
On-Screen
Display
(OSD)
Main Menu
Submenu
Auto adjust
Luminance
Geometry
Brightness/Contrast/ /Exit
H.Position/V. Position/Pixel
Clock/Phase/Exit
Color
Auto Color/9300K/6500K/5800K
User Preset(R,G,B, gain value)/Exit
Volume
OSD
OSD H. Position// OSD V. Position/
OSD time/Exit
Language
English/French/German/Italian/
Spanish/Japanese/Traditional Chinese
/Simple Chinese
Recall
Color Recall/Recall All/Exit
Miscellaneous
Input Selection/Sharpness/Display
Information/Exit
Exit
Display Area
(mm)
433.44 x 270.9
(20.1" diagonal)
Display
Colors
16.2 M
15
Rev.3
Download from Www.Somanuals.com. All Manuals Search And Download.
Video
Interface
VGA Compatible Analog RGB
DVI compatible signal
Scanning Frequency
H/V, Hz
31K-80K
60-75
Power Management
Meets VESA DPMS
45W/1W Max.
Power Consumption
(ON/OFF, W)
Dimensions
WxHxD
18.72 x 16.14 x 6.89 in.
(475.4 x 410 x 175mm)
Net Weight
(approx.)
16.256 lbs
(6.4 Kg)
Power Supply
Environment
Universal Input AC Socket
Operating Temperature: 32 to 104°F (0 to 40° C)
Relative Humidity: 10% to 90%
Regulatory
FCC B DoC,UL/cUL,Energy star
16
Rev.3
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix B
Supported PC Timing
Vertical
Scanning
Frequency
(Hz)
Horizontal
Scanning
Frequency
(kHz)
Item
Standards
Resolution
Dot Clock
(MHz)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
DOS
DOS
720x400
640x480
640x480
640x480
640x480
800x600
800x600
800x600
832x624
1024x768
1024x768
1024x768
1024X768
1152X864
1152X870
1152x900
1152x900
1280X1024
1280X1024
1280X1024
1680X1050
1680x1050
28.32
25.18
30.24
31.50
31.50
40.00
50.00
49.50
57.28
65.00
75.00
78.75
80.00
108.00.
100.00
94.50
108.00
108
70.08
59.94
67.00
72.80
75.00
60.32
72.19
75.00
74.55
60.00
70.07
75.00
74.93
75.00
75.06
66.00
76.14
60
31.47
31.47
35.00
37.86
37.50
37.88
48.08
46.88
49.73
48.36
56.48
60.02
60.24
67.50
68.68
61.80
71.81
63.98
75.83
80
Macintosh
VESA
VESA
VESA
VESA
VESA
VESA
VESA
VESA
VESA
Macintosh
VESA
Macintosh
SUN 66
SUN
VESA
IBM1
VESA
VESA
VESA
128.
135
119
146.25
71.53
75
59.883
59.954
64.7
65.29
*Once a mode is optimized, there is no need to make any further
adjustment
as long as the VGA card remains unchanged.
*Specifications are subject to change without notice.
17
Rev.3
Download from Www.Somanuals.com. All Manuals Search And Download.
Supported Video mode
Vertical
Horizontal
Scanning
Frequency
(kHz)
Item
Standards
Scanning
Frequency
(Hz)
1
2
3
4
5
720x480i
720x480P
1280x720P
1920x1080i
1920x1080P
29.97
59.94
60
30
60
15.73
31.46
45
33.75
67.5
18
Rev.3
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix C
Troubleshooting
This LCD monitor comes pre-adjusted with standard VGA timing. Due to
output timing differences among various VGA cards, you may initially
experience an unstable or unclear display when a new display mode or new
VGA card is selected.
Before applying any of the following troubleshooting procedures, you should
first apply the Auto Adjust option in the OSD menu.
PROBLEM: Display is unclear and unstable
To stabilize and clarify your display, open the OSD and adjust the clock and
phase to obtain a clear display or change the resolution to the display’s optimal
setting 1680 x 1050 at 60hz. Make sure you use auto adjust function after
changing the resolution.
PROBLEM: There is no LCD display
If there is no display on the LCD, refer to the following:
1. Make sure that the power indicator on the LCD monitor is lit,
that all connections are secure, and that the system is running
on the correct timing. Refer to Appendix B for information on
timing.
2. Turn off the LCD monitor and then turn it back on again. Press
the OSD Menu button (refer to Chapter 2) once and then press
one of the Adjustment Control buttons several times. If there is
still no display, press the other Adjustment Control button
several times.
3. If step 2 does not work, connect your PC system to another
external CRT. If your PC system functions properly with a CRT
monitor but it does not function with the LCD monitor, and the
LCD monitor’s power LED is blinking, the output timing of the
19
Rev.3
Download from Www.Somanuals.com. All Manuals Search And Download.
PC’s VGA card may be out of the LCD’s synchronous range.
Change to one of the alternate modes listed in Appendix B, or
replace the VGA card and repeat steps 1 and 2.
4. If the power LED is not lit, check that the AC power connector is
securely connected, and verify that the AC adapter LED is lit. If
the AC adapter LED is not lit, please contact your dealer for
assistance.
PROBLEM: The LCD displays “signal out of range” error message
1. If you have a CRT monitor, please connect the CRT monitor to
the computer and change the refresh rate down to 60hz via
your video card’s display settings menu. After the setting of
60hz has been change you can then use the LCD on the
computer.
2. If you do NOT have a CRT monitor, please make sure both the
X20WG-Naga and your computer is turned off. Afterwards turn
on the LCD and the computer.
3. While the computer is turned on, press the “F8” key on your
keyboard continuously until a selection menu appears and
select the “Safe Mode” option.
4. When you’ve entered Safe Mode please uninstall any video
card driver and monitor driver by using either the “Add /
Remove Programs” icon or going into “System Properties” and
manually removing anything under “Monitors” and “Display
Adapters”.
5. After removing all the drivers, please reboot your computer and
you should be able to see windows. Please then procede to
install your monitor driver first, then your video card driver.
Please remember to make sure your refresh rate should be at
60hz.
20
Rev.3
Download from Www.Somanuals.com. All Manuals Search And Download.
|