Scag Power Equipment Lawn Mower GC STWC 61 User Guide

MODEL GC-STWC-61  
THIS MANUALCONTAINS THE OPERATING  
INSTRUCTIONS AND SAFETY INFORMA-  
TION FORYOUR SCAGACCESSORY. READ-  
ING THIS MANUAL WILL PROVIDE YOU  
WITH MAINTENANCE AND ADJUSTMENT  
PROCEDURES TO KEEPYOURACCESSORY  
PERFORMING TO MAXIMUM EFFICIENCY.  
THE SPECIFIC MODELS THAT THIS BOOK  
COVERS ARE CONTAINED ON THE INSIDE  
COVER. BEFORE OPERATING YOUR MA-  
CHINE, PLEASE READ ALL THE INFORMA-  
TION ENCLOSED.  
PART NUMBER 03229  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1.1 INTRODUCTION  
A replacement manual is available from your  
authorized Scag Service Dealer or by contacting:  
Scag Power Equipment, Service Department at P.O.  
Box 152, Mayville, WI 53050. You may also contact  
manual for this grass catcher can be downloaded by  
using the model and serial number or use the contact  
form to make your request. Please indicate the  
complete model and serial number of your Scag  
product when requesting replacement manuals.  
This manual has been prepared to provide the  
information you need to correctly assemble, operate,  
and maintain this grass catcher. Read it carefully and  
keep it for future reference.  
THEREPLACEMENTOFANYPARTONTHIS  
PRODUCTBYOTHERTHANTHE  
MANUFACTURER'SAUTHORIZED  
REPLACEMENTPARTMAYADVERSELY  
AFFECTTHEPERFORMANCE,DURABILITY  
ORSAFETYOFTHISPRODUCT.  
USE OF OTHER THAN ORIGINAL SCAG  
REPLACEMENTPARTSWILLVOIDTHE  
WARRANTY.  
WARNING  
DO NOT OPERATE WITHOUT DISCHARGE CHUTE, MULCHING  
KIT, OR ENTIRE GRASS CATCHER INSTALLED  
If additional information or service is needed that is  
not outlined in this manual, please contact your Scag  
Power Equipment dealer. Scag dealers are trained in  
the latest service methods and carry a full line of Scag  
replacement parts.  
2. Before removing the grass bags, disengage the  
mower, stop the engine and wait for all  
movement to stop.  
3. ALWAYS turn the engine OFF, remove the key  
and wait for all movement to stop before  
servicing or cleaning the mower or the grass  
catcher.  
When ordering parts, always provide the complete  
model number of your catcher.  
All information provided in this manual is based upon  
information available at the time of printing. Scag  
Power Equipment reserves the right to make changes  
at any time without notice or obligation.  
DANGER  
ROTATING BLOWER  
BLADES  
1.2 DIRECTION REFERENCE  
STOP ENGINE BEFORE  
ENTERING CHUTE  
The "Right" and "Left", "Front" and "Rear" of the  
machine are referenced from the normal operating  
position.  
CONTACT CAN INJURE  
4. Do not modify or alter any component of the  
grass catcher attachment or mower.  
2.1 SAFETY AND OPERATING  
INSTRUCTIONS  
5. Do not allow any passengers to ride on the grass  
catcher attachment or on the mower.  
-NOTE-  
To avoid personal injury, it is imperative that all  
safety instructions be observed.  
1. Read this operator's manual and the  
operator's manual that is supplied with the  
machine this attachment is used on.  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
4. Install the grass catcher pulley onto the spindle  
assembly. Apply loctite to both pulley setscrews  
and tighten. See Figure 3-1.  
3.1 ASSEMBLY INSTRUCTIONS FOR 61"  
CUTTER DECK  
-NOTE-  
5. Install the blower mounting bracket to the deck  
using carriage bolts (p/n 04003-11), lockwashers,  
and nuts. Do not fully tighten the hardware at  
this time. See Figure 3-2, Page 3.  
Use the illustrated parts list as a part number  
reference when following the assembly  
instructions.  
1. Remove all packaging materials. Lay out the  
mounting hardware and the catcher assembly  
parts for easy access. Prepare the work area  
making sure that it is a clean, safe environment.  
6. Install the blower assembly to the mounting  
bracket and secure with the mounting pin.  
See Figure 3-3, Page 3.  
7. Align the blower assembly with the discharge  
opening of the cutter deck. Tighten the hardware  
for the mounting bracket. Then tighten the  
hardware for the catch plate. See Figure 3-3,  
Page 3.  
WARNING  
DO NOT OPERATE WITHOUT DISCHARGE CHUTE, MULCHING  
KIT, OR ENTIRE GRASS CATCHER INSTALLED  
8. Install the large hair pin through the rear hole in  
the discharge chute mounting bracket. See  
Figure 3-3, Page 3.  
2. Remove the discharge chute from the cutter  
deck. See Figure 3-1.  
-NOTE-  
9. Install the belt to the spindle pulley. When  
replacing the belt, see figure below.  
Do not discard the discharge chute or  
mounting hardware. The discharge chute  
MUST be reinstalled any time the grass  
catcher has been removed from the machine.  
BACK SIDE  
IDLER PULLEY  
BLOWER  
PULLEY  
3. Remove the right side belt cover to gain access to  
the spindle assembly. Remove the front u-nut  
from the cutter deck bracket. See Figure 3-1.  
-NOTE-  
Retain the original belt cover. This cover  
MUST be reinstalled any time the  
complete catcher system is removed.  
SPINDLE  
PULLEY  
FRONT SIDE  
IDLER PULLEY  
REMOVE DISCHARGE  
INSTALL PULLEY  
ON RH SPINDLE SHAFT -  
ON TOP OF EXISTING  
SPINDLE DRIVE  
CHUTE AND  
HARDWARE  
REMOVE EXISTING  
RT. SIDE BELT  
COVER  
PULLEY  
REMOVE U-NUT  
RIGHT SIDE OF  
CUTTER DECK SHOWN  
(Note: Some parts not shown for viewing purposes.)  
Figure 1- GC-STC install art  
FIGURE 3-1  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
FLATWASHER  
ELASTIC STOP  
NUT  
CARRIAGE BOLT  
FIGURE 3-2  
BLOWER  
ASSEMBLY  
HAIR  
PIN  
MOUNTING  
BRACKET  
TIGHTEN  
CATCH PLATE  
HARDWARE  
MOUNTING PIN  
TIGHTEN MOUNTING  
BRACKET HARDWARE  
RIGHT SIDE OF  
CUTTER DECK SHOWN  
(Note: Some parts not shown for viewing purposes.)  
2005 GC-STC install art 3  
FIGURE 3-3  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
10. Install the new belt covers and secure. See items  
number 1 and number 21 on page 8 of the Blower  
Mounting Components section in the Illustrated  
Parts List for proper installation.  
13. Attach the hood assembly to the machine by  
installing the mounting post into the hopper  
mounting brackets. Secure with the ring pins and  
tighten the locking bolts. See Figure 3-6.  
11. Install the LH & RH hopper mounting brackets to  
the outside of the frame on the rear of the machine  
and secure using six (6) 3/8-16 x 1" hex head  
bolts, and six (6) 3/8-16 elastic stop nuts. See  
Figure 3-4. Do Not install mounting hardware in  
the rear holes provided in the RH hopper mounting  
Locking  
Bolts  
bracket at this time  
LH  
Ring Pins  
Hopper  
Mounting  
Bracket  
Locking  
Bolts  
Ring Pins  
RH  
Hopper  
Mounting  
Bracket  
Rear Frame  
3/8-16  
Elastic Stop Nut  
04021-09  
FIGURE 3-6  
Figure  
4
A
2008 GC-STT Install Art  
14. Install the hose from the blower assembly adapter  
to the hopper hood and secure using the 6-1/2"  
clamps.  
3/8-16 x 1”  
04001-32  
FIGURE 3-4  
15. Install the bag assemblies.  
12. Remove the upper hex head bolt and serrated  
flange nut securing the support bracket to the  
frame of the machine. Retain the serrated flange  
nut for re-use. Install the muffler guard as shown  
and assemble to the frame of the machine by  
installing two (2) 3/8-16 x 1-1/4" hex head bolts  
through the rear holes in the RH hopper mounting  
bracket and secure with two (2) 3/8-16 elastic  
stop nuts provided. See Figure 3-5. Install the  
front mounting tab of the muffler guard between  
the support bracket and the frame of the machine.  
Secure with the 3/8-16 x 1-1/2" hex head bolt  
supplied with this catcher and the serrated flange  
nut removed previously.  
16. Using the weight support bar as a guide, identify  
the four corresponding mounting holes, and the  
existing hardware that will need to be removed in  
order to secure the weight support bar to the front  
of the machine as shown. See Figure 3-7.  
17. Install one (1) 7/16-14 x 1-3/4" hex head bolt into  
each of the four mounting holes in the weight  
support bar, and through the matching holes in the  
caster support weldment. Secure this assembly to  
the front of the machine using the  
7/16- .5" x 1-1/4" x .083" flatwashers, and the  
7/16-14 elastic stop nuts. Torque hardware to  
59 ft. lbs. See Figure 3-7.  
3/8-16  
Elastic Stop Nut  
04021-09  
Existing  
Nut  
3/8-16 x 1-1/4  
04001-32  
Muffler Guard  
3/8-16 x 1-1/2  
Support  
Bracket  
04001-20  
FIGURE 3-7  
18. Operate and test.  
FIGURE 3-5  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
4.1 GRASS CATCHER REMOVAL  
INSTRUCTIONS  
1. Prepare the machine so there is easy and safe  
access to the work area. Remove the key and  
maintain all safety related work procedures.  
Always wear eye and hand protection.  
Loosen  
Locking  
Bolts  
2. Remove the bag assemblies from the grass  
catcher.  
Remove Pins  
Loosen  
Locking  
Bolts  
3. Remove the rubber strap holding the adapter to  
the blower assembly. See Figure 4-1.  
Remove Pins  
4. Remove the belt, pin and large hair pin securing  
the blower assembly to the cutter deck and  
remove the blower assembly. See Figure 4-1.  
FIGURE 4-2  
ADAPTER  
6. With help from an assistant, remove the hood  
assembly.  
BLOWER  
ASSEMBLY  
HAIR  
PIN  
WARNING  
DO NOT OPERATE WITHOUT DISCHARGE CHUTE, MULCHING  
KIT, OR ENTIRE GRASS CATCHER INSTALLED  
PIN  
MOUNTING  
BRACKET  
7. Re-install the side discharge chute to the opening  
on the cutter deck. Replace the two outside  
mounting bolts on the discharge chute with the  
clevis pins (p/n 04064-15) and rue cotter pins  
(p/n 04069-03). See Figure 4-3.  
RIGHT SIDE OF  
CUTTER DECK SHOWN  
2005 GC-STC removal art 1  
(Note: Some parts not shown for viewing purposes.)  
DISCHARGE  
CHUTE  
CLEVIS PIN  
P/N 04064-15  
FIGURE 4-1  
5. Loosen the locking bolts and remove the two (2)  
pins holding the hood assembly to the mounting  
posts on the rear of the machine. See Figure 4-2.  
CLEVIS PIN  
P/N 04064-15  
RUE COTTER PIN  
P/N 04069-03  
GC-STC removal art 3  
FIGURE 4-3  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
MAINTENANCE  
5.1 MAINTENANCE CHART - RECOMMENDED SERVICE INTERVALS  
HOURS  
Break-In 8 20 40 100 200 500 Procedure  
(First 10)  
Comments  
X
X
X
X
Check all hardware for tightness  
Inspect hose and adapter  
Check belt for proper alignment  
Inspect fabric bags  
X
X
X
X
X
*Check screen in hopper  
Inspect hose and adapter  
Inspect fabric bags  
Remove debris from screen  
Check condition of blower  
*Apply grease to blower bearings  
Check belt for proper alignment  
See figure below  
X
* Perform these maintenance procedures more frequently under extreme dusty or dirty conditions.  
GREASE FITTING  
ON BEARING HOUSING  
GREASE FITTING  
ON BEARING HOUSING  
BEHIND PULLEY  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
NOTES  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
GC-STWC BLOWER HOUSING ASSEMBLY  
9
48  
10  
11  
12  
13  
2
4
8
1
9
5
6
3
11  
7
10  
10  
14  
44  
47  
27  
14  
11  
12  
15  
43  
42  
41  
16  
14  
15  
17  
26  
28  
17  
39  
40  
18  
34  
27  
19  
25  
20  
21  
41  
38  
22  
23  
3
35  
27  
51  
24  
14  
46  
R
D
O
T
A
B
A
T
N
S
IN  
24  
14  
t
o
G
W
p
G
e
n
B
E
R
g
i
n
L
A
D
D
e
U
H
O
D
b
N
I
N
e
f
S
L
C
E
O
o
r
S
T
E
e
A
S
O
P
E
S
c
S
R
G
l
G
e
A
R
a
n
E
A
R
G
A
in  
N
U
S
T
g
D
E
A
C
o
r
R
A
M
O
D
T
r
e
C
W
E
m
L
I
S
H
O
o
v
I
E
R
N
R
i
n
S
T
O
g
A
R
E
L
R
L
E
D
29  
50  
30  
33  
32  
37  
31  
31  
45  
47  
2005 GC Blower Assembly  
45  
35 34  
49  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
GC-STWC BLOWER HOUSING ASSEMBLY  
Ref.  
No.  
Part  
Number  
Ref.  
No.  
Part  
Number  
Description  
Description  
1
2
3
4
5
6
7
8
04067-07  
481547  
04019-02  
04001-59  
04001-01  
423298  
481428  
482300  
04024-02  
04021-05  
04041-07  
43277  
Pin, Ring 2-1/4" Long  
Lanyard, Deck Height Pin  
Nut, Serr. Flange 1/4-20  
Bolt, Hex Head 1/4-20 x 1-1/4"  
Bolt, Hex Head 1/4-20 x 3/4"  
Belt Cover, Rear  
Grip, Blower Lever  
Cap, Square  
Nut, Push On 3/8 Thread  
Lock Nut, 3/8-16  
Flatwasher, 3/8-.391 x .938 x .105  
Spacer  
27  
28  
29  
30  
31  
32  
33  
34  
35  
36  
37  
38  
39  
40  
41  
42  
43  
44  
45  
46  
04019-04  
Nut, Serr. Flange 3/8-16  
04001-136 Bolt, Hex Head 3/8-16 x 1-1/2 Gr. 8  
483391  
461681  
04003-12  
04063-06  
461796  
483034  
04019-03  
04040-04  
421319  
48136-02  
48135-13  
482298  
04012-04  
461684  
481522  
43212  
Decal, Danger  
Blower Housing w/Decals  
Bolt, Carr. 5/16-18 x 3/4" Gr. 5  
Key, 1/4 x 1/4 x 1-1/2"  
FanWeldment  
Bearing Assembly  
9
Nut, Serr. Flange 5/16-18  
Flatwasher, 5/16-.344 x .688 x .065  
Cover, Blower Housing  
Clamp, 8-5/8" Max Dia.  
Hose, 8" Dia. x 56" Long  
Pulley, 4-3/4" O.D. - 1" Bore  
Set Screw, 5/16-18 x 3/8"  
Frame, Blower Mount - 61"  
Spring, Main Drive  
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
25  
26  
483209  
Pulley, Idler 4" Dia.  
Nut, Elastic Stop 3/8-16  
Lockwasher, 3/8-16  
04021-09  
04030-04  
423933  
04003-05  
04001-46  
04001-81  
04001-21  
461928  
482379  
483189  
04043-04  
43575  
483402  
Plate, Catch Mounting  
Bolt, Carr. 3/8-16 x 1-1/2"  
Bolt, Hex Head 3/8-16 x 2-1/4"  
Bolt, Hex Head 3/8-16 x 3-1/2"  
Bolt, Hex Head 3/8-16 x 1-3/4"  
Idler Arm Assembly, GC-STT 61"  
Belt, GC-STT 61"  
Pulley, 4" O.D., GC-STT  
Washer, 3/8 Hardened  
Pivot, Idler - 61" & 72"  
Decal, Belt Cover  
Spacer  
Nut, Serr. Flange 5/16-18  
Adapter w/Strap  
04019-03  
461419  
424094  
04062-05  
461680  
483393  
47  
Plate, Blower Catch  
48  
49  
50  
51  
Hair Pin Cotter, .243 x 4"  
Blower Housing Assembly, GC-STT  
Decal, Rotating Blower  
Decal, Blower  
483392  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
GC-STWC 61" BLOWER MOUNTING COMPONENTS  
10  
6
10  
11  
5
2
4
6
1
7
8
3
6
22  
9
13  
12  
21  
14  
15  
15  
22  
20  
16  
18  
17  
19  
RIGHT SIDE OF 61"  
CUTTER DECK SHOWN  
GC-STWC-61 Blower Attachment Parts  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GC-STWC 61" BLOWER MOUNTING COMPONENTS  
Ref. Part  
No.  
Number  
Description  
1
2
3
483226  
04029-04  
482300  
BeltCover, GC-STWC-61"  
Wingnut, Plastic 3/8" Small  
Cap, Square Vinyl  
4
5
04021-08  
461723  
Nut, Elastic Stop 1/4-20  
Adapter, Blower GC-STT  
6
7
8
9
04040-14  
48137-04  
04001-59  
481625-01  
04064-15  
04069-03  
04067-07  
481547  
Flatwasher, 1/4-.312 x .750 x .065  
Rubber Strap 7-3/4"  
Bolt, Hex Head 1/4-20 x 1-1/4"  
Knob W/Stud, 3/8-16 x 1-1/4"  
Clevis Pin, 5/16 x 1-1/2"  
Pin, Rue Cotter 5/16 Dia.  
Pin, Ring 1/2 x 2-1/4"  
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
Lanyard  
482377  
Pulley, 5-1/2" for 61" Deck  
Setscrew, 5/16-18 x 3/8"  
Nut, Elastic Stop 1/2-13  
Lockwasher, 1/2"  
Flatwasher, 1/2-.531 x 1.062 x .095  
Bolt, Hex Head 1/2-13 x 1-1/2" Grade 5  
Mounting Post Weldment, Blower - 61"  
Belt Cover, GC-STWC-61  
04012-04  
04021-07  
04030-06  
04040-07  
04001-71  
451413  
423826  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GC-STWC BUCKET SUPPORT COMPONENTS (UPPER)  
3
36  
37  
35  
1
6
4
2
3
5
9
11  
8
33  
4
33  
5
23  
16  
21  
22  
9
21  
16  
13  
23  
32  
5
18  
31  
11  
19  
13  
16  
9
16  
5
24  
9
18  
20  
16  
14  
5
4
5
38  
16  
35  
25  
17  
31  
9
34  
15  
27  
30  
32  
29  
26  
28  
12  
10  
40  
39  
7
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GC-STWC BUCKET SUPPORT COMPONENTS (UPPER)  
Ref.  
No.  
Part  
Number  
Description  
1
423302  
Screen, Catcher Hood  
2
3
4
5
6
7
8
04090-02  
04041-19  
04001-32  
04041-01  
461408  
Pop Rivet, 3/16 x .652  
Flatwasher, 3/16-.196 x .469 x .048  
Bolt, Hex Head 3/8-16 x 1-1/4"  
Flatwasher, 3/8-.391 x .938 x .105  
Hood Assembly, GC-STT (includes items 1, 2 & 3 and items 2 & 15 on page 14)  
Bolt, Hex Head 7/16-14 x 1-3/4"  
Hinge, Upper LH  
04001-117  
423258  
9
04021-09  
04040-11  
04001-46  
04021-11  
04001-20  
04001-135  
451674  
04019-04  
04090-03  
43546  
482304  
423436  
43212  
04021-05  
43277  
Nut, Elastic Stop 3/8-16  
Flatwasher, 7/16-.500 x 1-1/4"  
Bolt, Hex Head 3/8-16 x 2-1/4"  
Nut, Elastic Stop 7/16-14  
Bolt, Hex Head 3/8-16 x 1-1/2"  
Bolt, Hex Head 3/8-16 x 1-3/4" Grade 8  
Support Weldment, Bag Frame  
Nut, Serrated Flange 3/8-16  
Rivet, 3/16 x .402 POP  
Bushing, Hopper Pivot  
Spring, Hood Hinge  
Hinge, Lower LH  
Spacer  
Locknut, 3/8-16  
Spacer  
Hinge, Upper RH  
Hinge, Lower RH  
Hose, 8" Dia. x 56" (61")  
Clamp, 8-5/8" Max Dia. (61")  
Tube, Filler (8" Hose)  
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
25  
26  
27  
28  
29  
30  
31  
32  
33  
34  
35  
36  
37  
38  
39  
40  
423259  
423261  
48135-13  
48136-02  
482422  
482421  
Elbow (8" Hose)  
04001-10  
04021-10  
04040-15  
04041-11  
04030-04  
482409  
04010-25  
04021-01  
04001-08  
451517  
Bolt, Hex Head 5/16-18 x 1-1/4"  
Nut, Elastic Stop 5/16-18  
Flatwasher, 5/16-.375 x .875 x .083  
Flatwasher, 3/8- .406 x 1-1/2" x .179  
Lockwasher, 3/8" Spring  
Latch  
Screw, #10-32 x 3/4"  
Nut, Elastic Stop #10-32  
Bolt, Hex Head 5/16-18 x 3/4"  
Support Weldment, Weights  
Weight Assembly  
461097  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GC-STWC BUCKET SUPPORT COMPONENTS (LOWER)  
1
2
24  
22  
23  
21  
"A"  
18  
20 19  
17  
16  
3
4
5
6
11  
7
15  
TO "A"  
4
4
5
4
8
6
14  
7
12  
3
4
8
FRAME  
6
9
5
6
25  
10  
10A  
26  
9
STC 2008 BSC  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GC-STWC BUCKET SUPPORT COMPONENTS (LOWER)  
Ref.  
No.  
Part  
Number  
Description  
1
2
04090-02  
482321  
Pop Rivet, 3/16 x .652  
Seal, Hood  
3
423262  
Tube, Upright  
4
5
6
7
8
9
04041-07  
04021-09  
04020-04  
04021-05  
04067-07  
04001-19  
461995  
Flatwasher, 3/8-.391 x .938 x .105  
Nut, Elastic Stop 3/8-16  
Nut, 3/8-16  
Hex Lock Nut, 3/8-16  
Pin, Ring 1/2 x 2-1/4"  
Bolt, Hex Head 3/8-16 x 1"  
Mounting Bracket Weldment RH  
Mounting Bracket Weldment LH  
Lock Nut, 1/4-20 Center  
Bolt, Hex Head 3/8-16 x 2-1/4"  
Bolt, Hex Head 3/8-16 x 2-1/2"  
Bag Assembly, GC-STT  
Retainer, Seal  
10  
10A  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
25  
26  
461994  
04021-02  
04001-46  
04001-31  
482569  
423312  
451674  
04003-02  
04001-08  
423198  
04003-12  
423197  
04019-03  
04040-15  
04021-10  
04001-32  
451969  
Support, Bag Frame  
Bolt, Carr. 1/4-20 x 3/4"  
Bolt, Hex Head 5/16-18 x 3/4"  
Mount, Bag Frame Tube  
Bolt, Carr. 5/16-18 x 3/4"  
Tube, Bag Support  
Nut, Serr. Flange 5/16-18  
Flatwasher, 5/16-.375 x .875 x .083  
Nut, Elastic Stop 5/16-18  
Bolt, Hex Head 3/8-16 x 1-1/4"  
Muffler Guard  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GC-STWC DECALS  
483402  
482275  
MANUFACTURED UNDER ONE OR MORE  
OF THE FOLLOWING PATENTS:  
4,487,006 4,885,903 4,920,733 4,967,543  
4,991,382 4,998,948 5,042,239 5,117,617  
5,133,176 5,826,416 5,832,708 5,865,018  
6,192,666 6,766,633 6,892,519 6,996,962  
7,065,946  
PATENTS PENDING  
483044  
481327  
483392  
483392  
483391  
483391  
483393  
483393  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LIMITED WARRANTY- COMMERCIAL ACCESSORY  
AnypartoftheScagcommercialaccessorymanufacturedbyScagandfound,inthereasonablejudgmentofScag,  
tobedefectiveinmaterialorworkmanship,willberepairedorreplacedbyanAuthorizedScagServiceDealerwithout  
charge for parts and labor.  
The Scag accessory, including any defective part, must be returned to an Authorized Scag Service Dealer within  
the warranty period. The expense of delivering the accessory to the dealer for warranty work and the expense of  
returningitbacktotheownerafterrepairorreplacementwillbepaidforbytheowner. Scag’sresponsibilityinrespect  
toclaimsislimitedtomakingtherequiredrepairsorreplacements,andnoclaimofbreachofwarrantyshallbecause  
for cancellation or rescission of the contract of sale of any Scag machine. Proof of purchase will be required by the  
dealer to substantiate any warranty claim. All warranty work must be performed by an Authorized Scag Service  
Dealer.  
This warranty is limited to 90 days from the date of original retail purchase for any Scag accessory that is used for  
commercial purposes, or any other income-producing purpose including rental use.  
The warranty for the blower assembly (excluding the belt) is limited to 1-year from the date of original retail  
purchase. 90 Days for rental use.  
This warranty does not cover any accessory that has been subject to misuse, neglect, negligence, or accident,  
or that has been operated in any way contrary to the operating instructions as specified in the Operator's Manual.  
The warranty does not apply to any damage to the accessory that is the result of improper maintenance, or to  
any accessory or parts that have not been assembled or installed as specified in the Operator's Manual.  
The warranty does not cover any accessory that has been altered or modified. In addition, the warranty does not  
extend to repairs made necessary by normal wear, or by the use of parts or accessories which, in the reasonable  
judgment of Scag, are either incompatible with the Scag mower or adversely affect its operation, performance or  
durability. This warranty does not cover engines and electric starters, which are warranted separately by their  
manufacturer.  
ScagPowerEquipmentreservestherighttochangeorimprovethedesignofanyaccessorywithoutassumingany  
obligation to modify any accessory previously manufactured.  
All other implied warranties are limited in duration to the 90 day warranty period. Accordingly, any such implied  
warranties including merchantability, fitness for a particular purpose, or otherwise, are disclaimed in their entirety  
after the expiration of the appropriate ninety day warranty period. Scag’s obligation under this warranty is strictly  
andexclusivelylimitedtotherepairorreplacementofdefectivepartsandScagdoesnotassumeorauthorizeanyone  
toassumeforthemanyotherobligation. Somestatesdonotallowlimitationsonhowlonganimpliedwarrantylasts,  
so the above limitation may not apply to you.  
Scagassumesnoresponsibilityforincidental,consequentialorotherdamagesincluding,butnotlimitedto,expense  
forgasoline,oil,expenseofdeliveringthemachinetoanAuthorizedScagServiceDealerandexpenseofreturning  
it back to the owner, mechanic’s travel time, telephone or telegram charges, rental of a like product during the time  
warranty repairs are being performed, travel, loss or damage to personal property, loss of revenue, loss of use of  
the mower, loss of time, or inconvenience. Some states do not allow the exclusion or limitation of incidental or  
consequential damages, so the above limitation or exclusion may not apply to you.  
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
© 2007  
PART NO. 03229  
PRINTED 3-2007  
PRINTED IN USA  
SCAG POWER EQUIPMENT  
DIVISION OF METALCRAFT OF MAYVILLE, INC  
WWW.SCAG.COM  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Ramsey Electronics Stereo Amplifier 2 1 2 Watt Super Sleuth Audio Amplifier User Guide
Renesas Network Card RJJ10J1643 0101 User Guide
Ryobi Laminate Trimmer TR45 User Guide
Samsung Car Stereo System MCD CM300 User Guide
Samsung Home Security System SCV 2080 User Guide
Sanyo Battery Charger UR14650P User Guide
Sanyo Vacuum Cleaner SC X2015N User Guide
Scag Power Equipment Lawn Mower GC STWC 61 User Guide
Sealife Digital Camera DC100 User Guide
Senco Air Compressor PC1010 User Guide