Sanyo Flat Panel Television LCD 42XR9DA User Guide

INSTRUCTION MANUAL  
LCD-42XR9DA  
LCD TV  
Before connecting, operating or adjusting this product, please read the manual completely.  
Please keep this manual for future reference.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
Important Safety Precautions..........................................................................................................................1  
Important Notice............................................................................................................................................3  
Preparations....................................................................................................................................................4  
Identification of Controls................................................................................................................................6  
Connections....................................................................................................................................................9  
Basic Operations...........................................................................................................................................13  
Memorizing the Channels.............................................................................................................................16  
Channel and Program Selection....................................................................................................................20  
Picture Adjustment.......................................................................................................................................21  
Sound Adjustment.........................................................................................................................................22  
System Setup ................................................................................................................................................24  
Rating and Lock Setup ..................................................................................................................................25  
Timer Setup..................................................................................................................................................27  
EPG Operation.............................................................................................................................................29  
Teletext & Subtitle........................................................................................................................................30  
Screen setup for D-SUB (PC) Mode............................................................................................................31  
Hotel Mode Setup........................................................................................................................................32  
Troubleshooting............................................................................................................................................33  
Specifications................................................................................................................................................35  
Assembling the stand and removing the stand column.................................................................................36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Important Safety Precautions  
Electrical energy can perform many useful functions, but it can also cause personal injuries and property damage if improperly  
handled. This product has been engineered and manufactured with the highest priority on safety. But IMPROPER USE CAN  
RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARD. In order to prevent potential danger, please read the  
following instructions when installing, operating and cleaning the product. To ensure your safety and prolong the service life of  
your newTVproduct, pleaseread thefollowing precautions carefully before usingtheproduct.  
1. Read these instructions---Alloperatinginstructionsmustberead and understood before theproduct isoperated.  
2. Keep these instructions---Thesesafetyand operatinginstructionsmustbekeptina safe place for futurereference.  
3. Heedall warnings---Allwarningson theproduct and intheinstructionsmustbeobservedclosely.  
4. Followall instructions---Alloperatinginstructionsmustbefollowed.  
5.Attachments---Only use attachments/accessories specified by the manufacturer. Do not use attachments not  
recommendedbythemanufacturer. Useof improper attachmentscan resultinaccidents.  
6. Power source---This product is intended to be supplied by a listed power supply indicated on the marking label. If you are  
not sure of the type of power supply to your home, consult your product dealer or local power company. For added  
protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it  
from thewall outletand disconnectthecable system.  
7.Power cord protection---Protect the power cord from being walked on or pinched particularly at plugs, convenience  
receptacles, and thepoint wheretheyexitfrom theapparatus.  
Note: where the mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain  
readilyoperable.  
8.Overloading---Do not overload wall outlets, extension cords, or convenience receptacles on other equipment as this can  
resultina riskof fireor electricshock.  
9.Entering of objects and liquids---Never insert an object into the product through vents or openings. High voltages are  
present in the product, and inserting an object can cause electric shock and/or short internal parts. For the same reason, do  
notspill wateror liquid on theproduct.  
10. Servicing---Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged  
in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the  
apparatus has beenexposed torain or moisture, does notoperatenormally, or has beendropped.  
11.Damage requiring service---If any of the following conditions occurs, unplug the power cord from the AC outlet, and  
requesta qualified serviceperson toperform repairs.  
a. Whenthepower cord or plugisdamaged.  
b. Whena liquid isspilled on theproduct or whenobjectshavefallen intotheproduct.  
c. Whentheproduct has beenexposed torain or water.  
d. Whentheproduct does notoperateproperly as described intheoperatinginstructions.  
Do not touch the controls other than those described in the operating instructions. Improper adjustment of controls not  
described intheinstructionscan causedamage, whichoftenrequiresextensiveadjustmentworkbya qualified technician.  
e. If theproduct has beendropped or thecabinethas beendamaged inanyway.  
f. When the product displays an abnormal condition or exhibits a distinct change in performance. Any noticeable abnormality  
intheproduct indicatesthattheproduct needsservicing.  
12. Replacement parts---In case the product needs replacement parts, make sure that the service person replaces parts  
specified by the manufacturer, or those with the same characteristics and performance as the original parts. Use of  
unauthorized parts can resultinfire, electricshockand/or otherdanger.  
13. Safety checks---Upon completion of service or repair work, request the service technician to perform safety checks to  
ensurethattheproduct isinproper operatingcondition.  
14. Wall or ceiling mounting---When mounting the product on a wall or ceiling, be sure to ask a authorized service  
personneltocarryoutsetup. Thisisa safetyfeature.  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
Important Safety Precautions (Continued)  
15. Stand---Use only with the cart, stand, tripod, bracket, or table specified by the  
manufacturer, or sold with the apparatus. Do not place the product on an unstable  
trolley, stand, tripod or table. Placing the product on an unstable base can cause the  
product to fall, resulting in serious personal injuries as well as damage to the product.  
When mounting the product on a wall, be sure to follow the manufacturer’s instructions.  
Useonlythemountinghardware recommendedbythemanufacturer.  
16.Careful move---When a cart is used, use caution when moving the cart/apparatus  
combination to avoid injury from tip-over. Sudden stops, excessive force and uneven  
floor surfaces can causetheproduct tofall from thetrolley.  
NeverattempttomovetheTVunlesstheAC power cord has beendisconnected.  
17. Lightning---Unplug this apparatus during lightning storms or when unused for long  
periods of time.  
For added protection for this television equipment during a lightning storm, or when it is  
left unattended and unused for long periods of time, unplug it from the wall outlet and  
disconnect the antenna. This will prevent damage to the equipment due to lightning and  
power-linesurges.  
18. Do not use this apparatus near water---for example, near a bathtub, washbowl,  
kitchensink, or laundry tub, ina wetbasement, or neara swimmingpool, and thelike.  
Do not use immediately after moving from a low temperature to high temperature  
environment, as this causes condensation, which may result in fire, electric shock, or  
otherhazards.  
The apparatus shall not be exposed to dripping or splashing and that no objects filled with  
liquids, suchas vases, shall beplaced on theapparatus.  
19. Clean only with dry cloth---Unplug this product from the wall outlet before  
cleaning. Do notuseliquid cleanersor aerosol cleaners. Usea damp clothfor cleaning.  
20. Ventilation---Do not block any ventilation openings. Install in accordance with the  
manufacturer instructions. The vents and other openings in the cabinet are designed for  
ventilation. Do not cover or block these vents and openings since insufficient ventilation  
can cause overheating and/or shorten the life of the product. Do not place the product on  
a bed, sofa, rug or other similar surface, since they can block ventilation openings. This  
product is not designed for built-in installation; do not place the product in an enclosed  
place such as a bookcase or rack, unless proper ventilation is provided or the  
manufacturer’sinstructionsarefollowed.  
21.Heat sources---Do not install near any heat sources such as radiators, heat registers,  
stoves, or otherapparatus (includingamplifiers) thatproduce heat.  
22.Panel protection---The display panel used in this product is made of glass.  
Therefore, it can break when the product is dropped or impacted upon by other objects.  
Becareful nottobeinjuredbybrokenglasspiecesincasethedisplay panel breaks.  
23.Pixel defect---The display panel is a very high technology product, giving you finely detailed pictures. Occasionally, a few  
non-active pixels may appear on the screen as a fixed point of blue, green or red. Please note that this does not affect the  
performance of yourproduct.  
Warning: For continued safety, apparatus with class I construction shall be connected to a mains socket outlet with a  
protectiveearthingconnection.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
Important Notice  
Do not use inhot andcold rooms (locations)  
About Temperature  
! When the unit is used in rooms (locations) with low temperature, the picture may  
leave trails or appear slightly delayed. This is not a malfunction, and the unit will  
recoverwhenthetemperaturereturnstonormal.  
! Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location  
exposed to direct sunlight or near a heater, as this may cause the cabinet to deform  
and thescreentomalfunction.  
! Storagetemperature: 0°Cto+50°C  
! Workingtemperature:5°Cto+40°C  
The extended use of fixed image program material can cause a permanent after-image  
on thescreen.  
About After-Image  
This background image is viewable on normal programs in the form of a stationary fixed  
image. This type of irreversible screen deterioration can be limited by observing the  
following steps:  
A. Reducethebrightness/contrastsettingto a minimumviewinglevel.  
B. Do notdisplay thefixed imagefor extendedperiods of time.  
C. Turn thepower off whennot in actual use.  
Important Information Regarding Use of Video Games, Computers,  
Captions or Other FixedImageDisplays.  
! Do not allow a still picture to be displayed for an extended period, as this can cause a  
permanentafter-imagetoremainon thescreen.  
Examples of still pictures include logos, video games, computer images, teletext and  
imagesdisplayed in4:3mode.  
CAUTIONS:  
! The permanent after-image on the screen resulting from fixed image use is not an  
operatingdefectand as suchisnotcoveredbythewarranty.  
! Thisproduct isnotdesignedtodisplay fixed imagesfor extendedperiods of time.  
To clean this unit, wipewitha soft, drycloth.  
If the surfaces are extremely dirty, use a soft cloth dipped in a soap and water solution or  
a weakdetergentsolution.  
Cleaning and  
Maintenance  
! Useeyeglasscleanerto removestubborn dirtfrom thescreen.  
! Neverusealcohol, paint thinneror benzineto cleanthisunit.  
! Before using a chemically treated cloth, read the instructions that came with the  
cloth carefully.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preparations  
Using the Remote Control  
<Use the remote control by pointing it towards the remote sensor window of the  
set. Objects between the remote control and sensor window may prevent proper  
operation.  
3
0
0
3
5m  
Cautions regarding use of remote control  
<Do not expose the remote control to shock. In addition, do not expose the remote  
control toliquids, and do notplace inan area withhighhumidity.  
<Do not install or place the remote control under direct sunlight. The heat may cause deformation  
of theunit.  
<The remote control may not work properly if the remote sensor window of the main unit is under direct sunlight or strong  
lighting. In such a case, change the angle of the lighting or the TV set, or operate the remote control closer to the remote  
sensorwindow.  
Installing the Batteries  
If theremotecontrol fails tooperatetheTVfunctions, replacethebatteriesintheremotecontrol.  
1 Openthebatterycover.  
Inserttwosize-AAAbatteries.  
<(Place the batteries with their terminals corresponding to the (+)  
2
and (–)indications inthebatterycompartment.)  
3 Replacethecoverand slideinreverseuntilthelocksnaps.  
Precaution on battery use  
Improper useof batteriescan resultina leakageof chemicalsand/or explosion. Besuretofollow theinstructionsbelow.  
<Placebatterieswiththeirterminalscorresponding tothe(+)and (–)indications.  
<Differenttypesof batterieshavedifferentcharacteristics. Do notmixbatteriesof differenttypes.  
<Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries and/or cause old  
batteriestoleakchemicals.  
<Remove batteries as soon as they are non-operable. Chemicals that leak from batteries can cause a rash. If chemical  
leakageisfound, wipewitha cloth.  
<If theremotecontrol isnotusedfor an extendedperiod of time, removethebatteriesfrom theremotecontrol.  
<Thebatteries(batterypack of batteriesinstalled)shall notbeexposed toexcessiveheatsuchas sunshine, fireor thelike.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preparations (continued)  
Antenna Connection  
INSTALL the unit in a room where direct light will not fall upon the screen. Total darkness or a reflection on the picture  
screenmaycauseeyestrain. Softand indirectlightingisrecommended forcomfortableviewing.  
Optimum reception of colour requires a good signal and will generally mean that an outdoor antenna must be used.  
Theexacttypeand positionoftheantenna willdependuponyourparticulararea.  
TV REAR  
75-ohm coaxial cable (round cable)  
RF  
Note  
=It is recommended that the 75-ohm coaxial cable be used to eliminate interference and noise which may occur due to radio wave  
conditions.  
=The antennacable should not be bundled with the power cord.  
Power Connection  
InserttheACplugintoa convenientlylocated ACoutlet.  
Note  
=This product should be operated only fromthe type ofpower source indicated on the markinglabel.  
=Always unplug the ACcord frompower outlet when not using foralong period oftime.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Identification of Controls  
Main Unit (front view/side view)  
6 Main Power on/off Switch  
Remote Sensor  
Power Indicator  
CH+  
CH-  
1
2
VOL+  
VOL-  
MENU  
SOURCE  
3
4
5
1. CH+/-  
Press these two buttons to directly change the TV channel.  
In OSD menu, press these buttons to choose the OSD items.  
2. VOL+/-  
Press the VOL+ or VOL- button to directly increase or decrease the sound volume level;  
In OSD menu, press these buttons to adjust the value or setting of each item.  
3. MENU  
Press this button to access Menu main page.  
4. SOURCE  
To access input source select menu.  
5. STANDBY SWITCH  
Press this button to turn the unit ON from STANDBY mode. Press it again to turn the set back to STANDBY.  
6. POWER SWITCH  
Switch this switch ON first before you use the STANDBY switch to power the unit up.  
Note  
Functions of CH+/-, VOL+/-, MENU, SOURCE and are also provided to the remote control. This operation manual  
provides a description based on operatingfunctions withtheremotecontrol.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Identification of Controls (Continued)  
Main Unit (rear view)  
3
5
6 7 8 9  
1
2
4
1. HDMI 1/2/3 interface  
To connect with those equipments with HDMI or DVI interface, for example, Set-top box or DVD player. (A  
HDMI-to-DVI adapter cable is required when you are connecting a DVI-equipped device to this TV.)  
2. D-SUB input  
Connect to the D-SUB/AUDIO output jack on your computer.  
3. COMPONENT 1/2inputs  
Connecttotheaudio and component output jacksof a DVD player or Set-Top Box.  
4. Headphone jack  
Connectto your headphones.  
5. AV inputs (Video, Audio L, R)  
Receivevideo/audio signal from externalsources suchas VCRor DVDplayer.  
6. AV outputs(Video, Audio L, R)  
Connecttoyour VCRtorecord programs.  
7. RS232 interface  
For serviceuse. Theusercannot operatetheunitthroughthisterminal.  
8. Antenna input  
Connecttoyour cable systemor outdoor antenna.  
9. S/PDIF digitalaudio out terminal(coaxial)  
Connectto thedigital audio input of a digital audio component.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Identification of Controls (Continued)  
Remote Control Unit  
1 POWER:SwitchestheTVpower on or Standby.  
TV/Radio: SwitchesbetweenTVand Radio mode. (DTVonly)  
2
3
EPG:Displays theElectronicProgram Guide(DTVonly).  
1
4 FAV.LIST:Displays thefavoritechannellist.  
2
3
14  
15  
FAV+/ FAV–: Selectsthefavoritechannel.  
5
6
0 – 9 number buttons: Press to enter channel numbers or  
inputpassword.  
4
5
16  
7 ZOOM:Selectsthescreensize.  
MENU:Displays themain menuscreen.  
8
9
5/6/3/4  
/OK: Press the arrows to navigate through the  
menus or adjust an item. Press OK to confirm a selection or  
6
entera sub-menu.  
MUTE: Mutesthesound.  
10  
11  
12  
13  
14  
INFO:Displays theinformation banner.  
VOL+/–: Increasesor decreasesthevolume.  
S.MODE: Selectssound mode.  
7
8
17  
18  
STEREO: Selects bilingual, stereo or mono ( ATV only ), or  
audio track(DTVonly).  
FREEZE: To freezecurrentpicture.  
SLEEP:Setsthesleeptimer.  
15  
16  
17  
18  
9
RECALL: Returnstothepreviouschannel.  
EXIT:Exitsthemenuscreen.  
10  
11  
19  
20  
19 SOURCE: Displays inputsourcemenu.  
LIST:Displays thechannellist.  
20  
21  
21  
12  
CH / :Changeschannelup and down.  
P.MODE: Selectspicturemode.  
22 22  
13  
23  
Belowis teletext control buttons:  
Colored buttons (RED/GREEN/YELLOW/BLUE): Direct  
accesstothecolored itemsor corresponding pages. (Teletext)  
TTX: Usedtoenteror exitteletextmode. (Teletext)  
Subtitle: Displays the subtitle (DTV only), or the teletext  
subpage (ATVonly).  
23  
28  
24  
25  
26  
27  
29  
24  
30  
25  
31  
Size: Press this button several times to display the upper, then  
the lower part of the screen and then return to the normal size  
teletextpage. (Teletext)  
26  
Index: Pressthisbuttonto view the main index page.(Teletext)  
27  
28 Reveal: To revealor hidetheconcealed information. (Teletext)  
29 Hold:To stop or resumesub-pageacquisition. (Teletext)  
Update: Press the button to view the updated teletext page.  
(Teletext)  
30  
Mix: Press the button to display the Teletext on the screen with  
transparent background while viewing the TV program  
simultaneously. (Teletext)  
31  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections  
Cautions before connecting  
Carefullychecktheterminalsfor position and typebefore makinganyconnections.  
Theillustrationof theexternalequipmentmaybedifferentdependingon yourmodel.  
Loose connectors can result in image or color problems. Make sure that all connectors are securely inserted into their  
terminals.  
Refertotheoperatingmanual of theexternaldeviceas well.  
Whenconnectingan externaldevice, turnthepower off toavoid anyissues.  
Connecting digital coaxial audio  
TV REAR  
Coaxial cable  
OR  
S/PDIF IN  
(Coaxial)  
HIFi System  
Audio Processor  
For a full Home Theater sound experience, you must connect your Hi-Fi or  
Audio processor to the S/PDIF OUT(Coaxial) terminal on the TV rear.  
Note  
The S/PDIF OUT terminal only can output digital TV program’s audio.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections (Continued)  
Connecting a Camcorder  
TV REAR  
or  
Camcorder  
Cables are often color-coded  
to connectors. Connect red to  
red, whiteto white, etc.  
“PlayStation”  
AV cable  
How to connect:  
Connect the Audio/Video cables between the Audio (L/R)/Video jacks on the unit and camcorder.  
To playback Camcorder  
1. Turnon yourTV, thenpressSOURCEbutton. TheInputSourcemenuopens.  
2. Press5or6toselectAV, thenpressOKtoconfirm.  
3. Turn on your camcorder and set it to output mode. (For details, refer to your camcorder user manual.)  
4. Insert the tape into the camcorder and press Play button.  
Note  
The operations of the camcorder may be different and is dependent on your model. Please read the user manual of your camcorder  
to confirm operation.  
Connecting an HDMI device  
TV REAR  
Device with HDMI output  
HDMI cable  
How to connect a device using HDMI Connection:  
Connect the HDMI cable between the HDMI1, HDMI2 or HDMI3 interface on the unit and HDMI output on the device.  
To play from the device using HDMI:  
1. Turnon yourTV, thenpressSOURCE button. TheInputSourcemenuopens.  
2. Press5or6toselectHDMI1/HDMI2/HDMI3correspondingly, thenpressOKtoconfirm.  
3. Turnon yourdeviceand setittothecorrectmode. Seethedevice’suserguidefor moreinformation.  
Note  
If the external device has DVI output only, use a DVI to HDMI adapter cable to connect to the HDMI terminal. Connect the audio  
cable to the D-SUBAUDIOIN jackon the TV rear.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections (Continued)  
Connecting Component Video  
TV REAR  
Component video cable  
Device with  
component video  
Audio cable  
Cables are often color-coded  
to connectors. Connect red to  
red, whiteto white, etc.  
To connect a device using component video:  
Connect the Component Video cable between the Y, Cb/Pb, Cr/Pr input jacks on the unit and Y, Cb/Pb, Cr/Pr output jacks on  
thedevice.  
ConnecttheAudio cable betweentheAUDIOinputjackson theunitand AUDIOoutputjackson thedevice.  
To play component video from an external device:  
1. Turnon yourTV, thenpressSOURCE button. TheInputSourcemenuopens.  
2. Press5or6toselectComponent1/Component2 correspondingly, thenpressOKtoconfirm.  
3. Turnon yourexternaldeviceand setittothecorrectmode. Seethedevice’suserguidefor moreinformation.  
Connecting a Computer  
TV REAR  
D-Sub cable  
(analog RGB)  
To monitor port  
(15-pin D-Sub)  
To audio output jack  
Audio cable  
(stereo mini plugs)  
How to connect:  
Connect a D-Sub cable between the D-SUB jack on the computer and the D-SUB input jack on the unit.  
Connect an Audio cable between the AUDIO output on the computer and AUDIO input jack on the unit.  
To play video from a computer  
1. Turnon yourTV, thenpressSOURCE button. TheInputSourcemenuopens.  
2. Press5or6toselectD-SUB, thenpressOKtoconfirm.  
3. Turn on your computer, and adjust the display properties as required.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections (Continued)  
Connecting a VCR (for Recording)  
TV REAR  
VCR for Recording  
S-VIDEO  
AV cable  
How to connect:  
Connect the Audio/Video cables between the Audio (L/R)/Video jacks on the unit and VCR.  
To record program  
1. Turn on your TV, select a program you wish to record.  
2. Turn on your VCR, insert a videotape for recording.  
3. Press the Record button to begin recording.  
Note  
! Only analog TV programs and AV input source can be output through the AV output jacks.  
Connecting Headphones  
Inserttheplug of theheadphone into theTV’sHeadphone jack.  
When usingheadphones, adjust theheadphone volumeso as to avoid excessivelevels, as hearingdamage mayresult.  
TV REAR  
Headphones  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic Operations  
Main Menu Overview  
List of main menus to help you with operations  
PICTURE menu  
SOUND menu  
Picture  
Sound  
Time  
Option  
Lock  
Channel  
Picture  
Sound  
Time  
Option  
Lock  
Channel  
Sound Mode  
Treble  
Bass  
Balance  
Auto Volume  
User  
Picture Mode  
Contrast  
Brightness  
Color  
Sharpness  
User  
50  
50  
0
75  
45  
50  
50  
Off  
Off  
Spatial  
Tint  
0
Prev Page  
Next Page  
Move  
Menu  
Menu  
Select  
Return  
Select  
Move  
Return  
TIME menu  
OPTION menu  
Picture  
Sound  
Time  
Option  
Lock  
Channel  
Picture  
Sound  
Time  
Option  
Lock  
Channel  
Allow Update  
Clock  
28/Sep /2008 15:30  
On  
Off Time  
On Time  
Sleep Timer  
Auto Sleep  
Time Zone  
Off  
Off  
Off  
Off  
System Update Time  
Hearing Impaired  
SPDIF  
03:00  
On  
Auto  
Audio Preference  
Dolby Digital  
VIC GMT+10  
Menu  
Menu  
Select  
Move  
Return  
Select  
Move  
Return  
LOCK menu  
CHANNEL menu  
Picture  
Sound  
Time  
Option  
Lock  
Channel  
Picture  
Sound  
Time  
Option  
Lock  
Channel  
Lock Tuning  
Auto Tuning  
Off  
Set Password  
Block Program  
Parental Guidance  
DTV Manual Tuning  
ATV Manual Tuning  
Programme Edit  
No Block  
Restore Factory Default  
Menu  
Menu  
Select  
Move  
Return  
Select  
Move  
Return  
To navigate through the OSD main menu  
Withthepower on, pressMENUand themain menuscreendisplays.  
1
2
3
Press3  
or4  
toselectmenu. Press6  
toaccessthemenu.  
Within the menu, press 5, 6,3or4  
navigate through the options or adjust  
an option. PressOKtoconfirm a selectionor entera sub-menu.  
Press MENU to return to previous menu. Press EXITto exit the menu screen  
directly. Or you may wait for a few seconds and the on-screen menu will  
disappear from thescreenautomatically.  
4
Note  
=
Some menuitems maybe differentwhen the unit works in differentmode, andmenuitems thatarenot selectable aregrayedout.  
=
The Picturemenuhasmore thanone page, please use 5  
or 6to scroll through.  
=
The illustrations and on-screen displays in this manual are for explanation purpose (some are enlarged, others cropped) and may  
vary slightly fromthe actualones.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic Operations (Continued)  
Turning On/Off the Power  
Turning On  
Insertthepower cord intothewall outlet. PressthePower Switchon theunittopower on.  
If the unit is in standby mode, press Power button on the unit or the remote control to turn on the unit, and you will be ready  
touseitsfeatures.  
Turning Off  
With the power on, press the Power button on the unit or on the remote control to turn off the unit, and put the unit in  
standby mode. To cutoff thepower completely, pressthePower Switchdirectly.  
First Time Setup  
ThefirsttimeyouusetheTV, youneedtosetup theTV.  
Make sure that:  
1
! You haveinstalled thebatteriesin theremotecontrol.  
! You haveconnectedtheTVtoan antenna or cable TVoutlet.  
! You haveconnectedthepower cord.  
Energy Save Mode  
To use this TV for displaying in a store, please select [Store/Dynamic].  
[Standard/Energy Save] mode is recommended for normal home use.  
Press POWER to turn on the TV. After a few seconds  
theEnergy Save Modescreenopens.  
2
Standard/Energy Save  
Navigate  
Store/Dynamic  
Press 3or4to select Standard/Energy Save or  
Store/Dynamic. PressOKtoconfirm theselection.  
3
4
OK  
Confirm  
Installation Guide  
NowtheInstallation Guide screenwilldisplay.  
HighlightAuto Tuningitem, and pressOKtoaccess.  
Language  
English  
Auto Tuning  
OK  
Exit  
Start  
Exit  
Press 3or4to highlight Start item, and then Press OK to  
begintheauto channelsearch.  
5
Country Selection  
Langu
Australia  
Auto T
Start  
Cancel  
OK  
Exit  
Start  
Exit  
Note  
=
The LanguageandCountrySelectionitems aredefaultedandcannot be adjusted.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic Operations (Continued)  
Selecting the Input Signal Source  
PressSOURCE button.  
1
2
Input Source  
Press6or 5toselect theinputsource. Optionsinclude:  
! DTV WatchtheDTVsignal.  
DTV  
ATV  
! ATV— WatchtheATVsignal.  
AV  
! AV— Watchthesignal from theAVinput terminals.  
! Component 1Watch thesignal from theCOMPONENT 1input terminals.  
! Component 2 — Watch thesignal from theCOMPONENT 2input terminals.  
! D-SUB— Watch thesignal from theD-SUBinput jack.  
! HDMI1 — Watchthesignal from theHDMI 1input jack.  
! HDMI2 — Watchthesignal from theHDMI 2input jack.  
! HDMI3 — Watchthesignal from theHDMI 3input jack.  
Component 1  
Component 2  
D-SUB  
HDMI 1  
HDMI 2  
HDMI 3  
Move  
Select  
Press 3,4or OKtoconfirm theselection.  
3
Displaying the Information Banner  
Press the INFO button to display the information banner. The information banner displays current status information such as  
thechannelnumberand signalsource.  
Depending on the mode, different information is displayed. In DTV mode, more information will be displayed. Below is an  
examplebanner inDTVmode.  
InDTVmode, theinformation banner maycontain:  
! Channelnumberand name.  
! Currenttime.  
2
DTV  
SD MPEG  
ABC TV Sydney  
! Currentprogram name, startand endplay times.  
! Nextprogram nameand startand endplay times.  
! TVor Radio.  
! Audio mode, audio track.  
! Signalstrengthfor currentchannel.  
! Signalresolution.  
British Isles: A Natural History  
11:08  
Fri, Feb 27 2008  
12:00  
11:05  
Next  
English  
Subtitle  
Teletext  
576i  
Reserved for future use  
Alan Titchmarsh continues his epic journey around the  
British Isles and discovers why they are so diverse.  
! Subtitle, teletext.  
Note  
=
The above OSD is only served asanexample, andit is in DTV mode.  
=
Informationbanner content varies, depending on the broadcaster andyour settings.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Memorizing the Channels  
Whenyouturnon theTVfor thefirsttime, youshould perform an auto channelsearchtosetup stationson yourTV.  
Note:Be sure to select the proper inputsource(ATV/DTV) before operation.  
Auto Channel Search  
You should perform an auto channel search to searchfor all channels available and storesthemin memory.  
And before youstartAuto Tuning, itis necessaryto selecta countryfirstly.  
Picture  
Sound  
Time  
Option  
Lock  
Channel  
PressMENUand themain menuscreendisplays.  
Press3or4toselectChannel menu, press6toaccessthemenu.  
Highlight Auto Tuningitem, and press4or OKtoaccess.  
1
Auto Tun
DTV Man
Country Selection  
ATV Man
Start  
Australia  
Cancel  
2
3
4
Program
Now a confirmation box appears on the screen. Press 3  
highlight Start item, and then press OK to begin the auto  
channel search.(If you want to cancel, press 4to select Cancel  
or4to  
Menu  
Select  
Move  
Return  
Channel Tuning  
2 %... 78.50MHz  
item, and useOK toconfirm.)  
TV  
Then the TV begins memorizing all ATV/DTV channels available in  
your area. During the process, you can press MENU to skip the  
search, or EXITtostop.  
5
Programme(s)  
ATV  
:2  
DTV :0 Programme(s)  
Radio :0 Programme(s)  
Note  
In the confirmation box, the Country Selection item is defaulted to be Australia  
Press <Menu> to skip.  
Press <Exit> to exit.  
=
andcannot be adjusted.  
Manual Searching for DTV programs  
If desired digital programs cannot be searched by Auto Tuning, you can make  
useof DTV Manual Tuningto search programs manually.  
Picture  
Sound  
Time  
Option  
Lock  
Channel  
Auto Tuning  
DTV Manual Tuning  
ATV Manual Tuning  
Programme Edit  
In Channel menu, press 6  
item, thenpress4or OKtoaccess.  
or5to select DTV Manual Tuning  
1
2
3
Highlight VHF CH (or UHF CH) item, press 3  
selectyourdesiredchannelnumber.  
or4button to  
Menu  
Select  
Move  
Return  
Press OKtobeginthemanual DTV channelsearch.  
DTV Manual Tuning  
VHF CH  
At the bottom of the menu screen the DTV Signal strength bar is  
displayed. You can make use of it to check how strong your DTV  
signal is and whether you need to adjust your antenna or digital  
cable input. The higher the signal strength is, the less likely you are  
to experiencepicturedegradation.  
6
Please select channel then  
Press OK to search  
Bad  
Normal  
Good  
Then all the digital programs available in this channel will be  
searched and stored. During the process, you can press MENU or  
EXITtoexitthesearch.  
4
Menu  
Exit  
Select  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Memorizing the Channels (Continued)  
Manual Searching for ATV programs  
If desired analog programs cannot be searched by Auto Tuning, you can make  
useof ATV Manual Tuningto searchprograms manually.  
Channel  
Picture  
Sound  
Time  
Option  
Lock  
Auto Tuning  
DTV Manual Tuning  
ATV Manual Tuning  
Programme Edit  
In Channel menu, press 6  
item, thenpress4or OKtoaccess.  
or5to select ATV Manual Tuning  
1
2
3
Highlight Storage To item, press 3  
or4button to select a channel  
position inwhichyouwanttostore.  
Menu  
Select  
Move  
Return  
Use 6or5to select Search item, press 3  
or4to begin the  
manual ATVchannelsearch.  
Press 4, the unit searches towards higher frequency;  
Press 3, the unit searches towards lower frequency.  
ATV Manual Tuning  
Storage To  
1
Color System  
Audio System  
PAL  
BG  
1
The search stops when a program is found and this program will be  
stored in current channel, then press the RED button to save. During  
theprocess, If you want to stop the search , pleasepressEXITbutton.  
4
Current CH  
Search  
Fine-Tune  
Frequency  
445.25 MHz  
Exit  
SAVE  
Select  
Manual Fine Tuning  
Fine Tuning is not necessary under normal conditions. However, in area of  
inferior broadcast conditions where adjustment is necessary for a better  
pictureand sound effect, useFineTune.  
ATV Manual Tuning  
Storage To  
1
Navigate to ATV Manual Tuning submenu, highlight Current  
1
Color System  
Audio System  
PAL  
BG  
1
CH item, press 3  
or4to select a channel you want to perform fine  
tune.  
Current CH  
Search  
Fine-Tune  
Frequency  
Press 6  
to select Fine-Tune item, and then use 3or4button to  
2
3
finetuneuntilthebestpossible pictureand sound areobtained.  
445.25 MHz  
Exit  
SAVE  
Select  
During the process, press EXIT to exit, and RED button to save  
theeffect.  
Note  
Fine Tune is only foranalogTV program.  
=
Setting Audio System  
ATV Manual Tuning  
Normally it is unnecessary to set audio system. However, if  
abnormal sound occurs, youmaytrytoadjusttheaudio system.  
Storage To  
1
Color System  
Audio System  
PAL  
BG  
1
Navigate to ATV Manual Tuning submenu, press 5  
highlighttheAudio Systemitem.  
or6to  
Current CH  
Search  
1
Fine-Tune  
Frequency  
445.25 MHz  
Press 3or4to select the proper audio system. Press RED button  
tosave.  
2
3
Exit  
SAVE  
Select  
Press MENU to return to previous menu. Press EXIT to exit the  
menuscreendirectly.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Memorizing the Channels (Continued)  
Labeling Channels  
If required, youcan givea name to theprograms.  
Channel  
Picture  
Sound  
Time  
Option  
Lock  
Auto Tuning  
PressMENUand themain menuscreendisplays.  
1
DTV Manual Tuning  
ATV Manual Tuning  
Programme Edit  
Press3or4toselectChannel menu, press6toaccessthemenu.  
2
3
Press 6or5to select Programme Edit item, press 4or OK to  
open theProgramme Editmenu.  
Menu  
Select  
Move  
Return  
Within the program list, press 6or5to select a channel you want to  
edit, press GREEN button to start to label. Then a name symbol  
appears alongside.  
Programme Edit  
4
5
NAME  
TV  
TV  
TV  
TV  
1
2
3
4
S-03  
C-42  
S-04  
C-04  
Use6or5toselect charactertoinput, use3or4tomovethecursor.  
To deletetheinputting, pleasepressREDbutton.  
Afterfinishinginputting, pressOKtoconfirm.  
Themaximum lengthof label is5characters.  
Fav.List  
DEL  
NAME MOVE  
SKIP  
Repeattheabove stepstosetup morechannellabels.  
Note  
!Thelabels of DTVchannelsareautomatically assigned and cannot be changed by user.  
!Therewill beno NAMEitemin DTVmode.  
Setting Favorite Channels  
You can setup favoritechannelslistso thatyoucan quicklybrowse throughyour  
favoritechannels by usingFavoritebutton.  
Navigate to the Channel menu, press 5  
Edititem, press 4or OKtoopen theProgramme Editmenu.  
or6to select Programme  
Favourite List  
1
2
TV  
TV  
TV  
TV  
1
2
3
4
S-03  
C-42  
S-04  
C-04  
Use 6or5to select your favorite program, use FAV.LIST button to  
mark the selected program as favorite (a favorite symbol appears). To  
cancel the favorite mark, just press FAV.LIST button again and the  
symbol disappears. If the program list has more than one page, you can  
press6or5toscroll thepage.  
Repeattheabove stepstosetmorefavoriteprograms.  
OK  
Move  
Select  
To exit, pressEXIT button.  
3
Now you can press FAV.LIST button to display the favorite list,  
press 6or5to browse through the favorite programs and press  
OK to access the channel. Or you can use FAV+/FAV- to cycle  
amongthe favorite channels.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Memorizing the Channels (Continued)  
Channel List Management  
After auto search, a default channel list is created. You can make use of Programme Edit menu to select program, to skip  
unnecessarychannels, todeletechannels, tosortprograms, and tocreatea favoritechannellist.  
To skip unnecessary channels  
Afterauto search, youcan skipunnecessarychannelsso thatonlythechannelsyouwanttowatchcan beselectedby  
CH / CH .  
Navigate to Channel menu and press 6  
and thenpress4or OKtoaccess.  
or5to select Programme Edit item  
1
2
Programme Edit  
TV  
TV  
TV  
TV  
1
2
3
4
S-03  
C-42  
S-04  
C-04  
Press 6or5to select your unwanted channel, press BLUE button and a skip  
symbol appears alongside the selected channel in the list, which means this  
channelwillbeskipped.  
SKIP  
If you want to skip more channels, repeat the above steps to set more skip  
symbols tomorechannels.  
3
Fav.List  
DEL  
NAME MOVE  
SKIP  
Press EXIT to quit the list. Now when you press CH  
/
, these unwanted  
channelswillbeskipped.  
Note  
=
Ifthe Programme Edit menuhas more than one page, youmay press5or6to scroll the page upwardordownward.  
=
To restore askippedchannel, navigate to the ProgrammeEditmenu, selectthe channel andpress BLUEbuttonto cancel the skip symbol.  
To sort channels  
Programme Edit  
Thisfunction allows youtoarrangethechannelorder.  
TV  
1
2
3
4
S-03  
C-42  
S-04  
C-04  
SelectthechannelyouwanttomoveintheProgramme Editmenu.  
MOVE  
TV  
TV  
TV  
1
2
Press YELLOW button and a move symbol appears alongside the  
selected channel in the list, then use 6or5to move the channel  
upward or downward to a desired new position. Press YELLOW  
buttonagain tofinish thesorting.  
Fav.List  
DEL  
NAME MOVE  
SKIP  
Repeattheabove stepsfor eachchannelyouwishtomove.  
3
Note  
=
Ifthe Programme Editmenu has more thanone page, youmay press5or6to scroll the page upwardordownward.  
=
The order ofthe DTV channels is automaticallyassigned and cannotbechanged byuser.  
=
Therewill beno MOVEitem in DTVmode.  
To delete channels  
Programme Edit  
Thisfunction allows youtodeleteyourunwantedchannels.  
TV  
TV  
TV  
TV  
1
2
3
4
S-03  
C-42  
S-04  
C-04  
SelectthechannelyouwanttodeleteintheProgramme Editmenu.  
DEL  
1
2
Press RED button and a delete symbol appears alongside the  
selected channel in the list. Press RED button again to finish the  
delete.  
Repeattheabove stepsfor morechannelsyouwanttodelete.  
3
Fav.List  
DEL  
NAME MOVE  
SKIP  
Note  
=
Ifthe Programme Edit menuhas more thanone page, youmay press5or6to scroll the page upwardor downward.  
=
The deletedchannels cannot be foundunless you performachannel searchagain.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Channel and Program Selection  
Please note: your new TV is capable of receiving both radio and TV broadcasts. And for TV reception, your new TV is capable  
of receivingboth traditional analog channelsand digitalchannels.  
When watching digital TV program and you want to listen to radio program, simply press TV/Radio button to  
switch. To return to TV program, press TV/Radio button again. (When watching analog TV program, the TV/Radio  
buttondoes notwork.)  
TheTVallows channeland program selectioninthefollowing ways:  
Method 1— Using CH or CH  
PresstheCH or CH tocycleamong all available channels. Theskipped channelscan notbeselectedby  
CH or CH button.  
Note  
=
Byusing CH or CH , you cannot select analogchannels in DTV mode, or digital channels in ATV mode.  
Method 2— Using RECALL button  
PressRECALLtoswitchtothepreviouslytunedchannel.  
PressRECALL again toswitchback tothecurrentlytunedchannel.  
Note  
=
RECALLwill not work ifno channel hasbeen changedafterTV is turnedon.  
Method 3— Using 0 – 9 and OK button  
Press the 0 – 9 number buttons to input a channel number, then wait for some seconds or press OK to go directly to that  
channel.  
Whenselecting, theTVwillindicatethechannelthroughtheinformation banner.  
Note  
=
Byusing 0–9numberbuttons, you cannot select analogchannels in DTV mode, or digital channels in ATV mode.  
=
Whenin Radio mode, you canpress TV/Radio button to switch to TV mode.  
=
Ifyou input one-digit or two-digitchannel number, you canpress OKto go directly to the channel without waiting.  
Method 4— Using channel list  
Channel List  
TV  
1
2
3
4
S-03  
C-42  
S-04  
C-04  
Press LIST button to display the channel list. Use 5or6to select a channel and then press  
OKbutton.  
TV  
TV  
TV  
Note  
=
If the channel list has more than one page, you may press 5or6to scroll the page upward or  
downward.  
OK  
Move  
Select  
Favourite List  
TV  
TV  
TV  
TV  
1
2
3
4
S-03  
C-42  
S-04  
C-04  
Method 5— Using favorite channel list  
After you have created the favorite channel list, you can press FAV.LIST button to display  
thefavoritechannellist. Use5or6toselecta channeland thenpressOKbutton.  
Note  
=
You candirectly press FAV+/ FAVbutton to cycle amongthe favorite channels.  
OK  
Move  
Select  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Picture Adjustment  
Customizing the Picture  
PressMENUand themain menuscreendisplays.  
1
2
3
Press3or4toselectPicture menu, press6toaccessthemenu.  
Within the menu, press 5  
or 6  
to scroll through the page upward or downward,  
and press5,6,3,4tonavigatethroughtheoptions or adjustan option.  
PressMENUtoreturntopreviousmenu. PressEXITtoexitthemenuscreendirectly.  
4
Picture  
Sound  
Time  
Option  
Lock  
Channel  
Picture  
Sound  
Time  
Option  
Lock  
Channel  
Color Temperature  
Aspect Ratio  
Noise Reduction  
Light Sensor  
Light Status  
Screen  
Cool  
16:9  
Off  
On  
Picture Mode  
Contrast  
Brightness  
Color  
Sharpness  
User  
75  
45  
50  
50  
Dark  
Tint  
0
Prev Page  
Next Page  
Move  
Prev Page  
Next Page  
Select  
Select  
Move  
Menu  
Menu  
Return  
Return  
Option  
Picture Mode  
Description  
Selects a desired picture mode. You can select from Standard, Dynamic, Mild and User.  
Standard: Select for a standard picture.  
Dynamic: Select for a bright and vivid picture.  
Mild: Select for a finely detailed picture.  
User: The picture quality you set.  
Note: 1. To quickly change the picture mode, press the P.MODE button on the remote control repeatedly.  
2. The Dynamic mode is recommended for store use. When the set is switched on in this mode, an on-screen warning to  
that effect will appear.  
Adjusts image contrast.  
Contrast  
Adjustsscreenbrightnessfor easierviewingof dark picturesuchas nightscenesand black hair.  
Adjusts color saturation.  
Brightness  
Color  
Adjusts image sharpness and displays a sharp image.  
Adjusts tint for image.  
Sharpness  
Tint  
Note: The Tint item is only for NTSC system.  
Selects one of three automatic color adjustments. Sets to Warm to enhance hotter colors such as  
Color Temperature  
red, or set to Cool to see less intense colors with more blue. You can select from Warm, Cool  
and Normal.  
You can select the aspect ratio (display proportions) according to your video signal type or personal  
preference. You can select from 16:9, Zoom1, Zoom2 , Auto and 4:3.  
Aspect Ratio  
16:9: Displays a 16:9 picture.  
Zoom1: Enlarges the picture to fill the full screen.  
Zoom2: Enlarges the picture, the top and bottom portions may be cropped.  
Auto: Displays picture automatically in proper ratio.  
4:3: Displays a 4:3 picture.  
Note: You can press the ZOOM button repeatedly to select a desired aspect ratio.  
When selecting Zoom1/Zoom2, you may use 5or 6to move the picture upward or downward, or press4  
or 3  
to  
zoom in or out the picture.  
For the sake of protecting the screen, please do not display the image in 4:3 mode for extended periods of time.  
Select from Low/Middle/High to reduce noise in the picture, commonly called snow.  
Noise Reduction  
Light Sensor  
Select Off to turn off this function.  
Select On to enable the automatic brightness control. The light sensor measures the room  
brightness which allows the TV to automatically adjust the picture brightness, based on the ambient  
room light conditions.  
Note: Be sure not to put anything around the sensor, as its function may be affected.  
When Light Sensor is turned On, the ambient room light status will appear at the bottom of the  
menu. You can check the light status to know whether it is dark or normal or bright.  
Light Status  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Sound Adjustment  
Adjusting the Volume  
Using the volume buttons (VOL+ and VOL – )  
PresstheVOL+or VOL-toincreaseor decreasethevolume.  
Using the Mute  
PresstheMUTE buttontotemporarilyturnoff all sound. To restorethesound, presstheMUTE buttonagain.  
Adjusting the Sound  
PressMENUand themain menuscreendisplays.  
1
2
Picture  
Sound  
Time  
Option  
Lock  
Channel  
Sound Mode  
Treble  
Bass  
Balance  
Auto Volume  
User  
Press3or4toselectSound menu, press6toaccessthemenu.  
50  
50  
0
Within the menu, press 5  
or 6to navigate through the options,  
3
press3or4toadjustan option.  
Off  
Off  
Spatial  
Press MENU to return to previous menu. Press EXIT to exit the  
menuscreendirectly.  
4
Select  
Move  
Menu  
Return  
Option  
Sound Mode  
Description  
Selectsadesiredsoundmode. YoucanselectfromStandard,Music,Movie,SportsandUser.  
Standard: Select for normal programs.  
Music: Select for a music program.  
Movie: Select for a movie program.  
Sports: Select for a sports program.  
User: The sound quality you set.  
Note: To quickly change the sound mode, press the S.MODE button repeatedly.  
Adjusts Treble (high sounds).  
Treble  
Bass  
Adjusts Bass (low sounds)  
Adjusts volume balance (left and right volumes).  
Balance  
Auto Volume  
Select On to equalize overall volume levels across all channels.  
Select Off to turn off the auto volume control.  
Select On to turn on the surround sound effect. The benefits of surround sound are enormous.  
You can be completely enveloped in sound, just as if you were at a concert hall or cinema.  
Select Off to turn off surround sound.  
Spatial  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Sound Adjustment (Continued)  
Stereo/Bilingual Selection (for analog channels)  
You can quickly select sound multiplex mode by using the STEREO button on the remote control.  
NICAM Broadcast Selection  
This enables the selection of the reception mode when receiving a NICAM signal. To let you enjoy NICAM broadcasting, this  
TVsetreceivesNICAMsystemstereo, bilingual, and monaural broadcasts.  
Stereo  
When the TV set is receiving a stereo broadcast, press the STEREO button to select Stereo or Mono. When Mono is  
selected, theTVsound isoutputmonaurally.  
Bilingual  
When the TV set is receiving a bilingual program, press the STEREO button to select NICAM DUAL A or NICAM  
DUAL B.  
IGR (German stereo system) Broadcasts  
This enables the selection of the reception mode when receiving an IGR signal. To let you enjoy IGR broadcasting, this TV set  
receivesIGRsystemstereoand bilingual broadcasts.  
Stereo  
When the TV set is receiving a stereo broadcast, press the STEREO button to select Stereo or Mono. When Mono is  
selected, theTVsound isoutputmonaurally.  
Bilingual  
WhentheTVsetisreceivingbilingual program, presstheSTEREO buttontoselectDUAL A or DUAL B.  
Audio Track Selection (for digital channels)  
The digital-TV transmission system is capable of simultaneous transmission of many audio tracks (for example,  
simultaneous translations of the program into foreign languages, or different commentators for sport events). You can  
press STEREObuttontoselecttheaudio track.  
Note  
=
The availability ofthese additionalmulti-tracks” depends upon the broadcaster.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
System Setup  
System Setup  
You may change systemsettings such as Hearing impaired, SPDIF, Audio Preference, etc. by making use of Option menu.  
PressMENUand themain menuscreendisplays.  
1
Picture  
Sound  
Time  
Option  
Lock  
Channel  
2
Press3or4toselectOptionmenu, press6toaccessthemenu.  
Allow Update  
System Update Time  
Hearing Impaired  
On  
03:00  
On  
Auto  
Within the menu, press 5,6,3,4to navigate through the options  
or adjustan option.  
3
SPDIF  
Audio Preference  
Dolby Digital  
Press MENU to return to previous menu. Press EXIT to exit the  
menuscreendirectly.  
4
Menu  
Select  
Move  
Return  
Option  
Allow Update  
Description  
Press 3/4  
to select On to allow system update.  
Select Off to turn off the function.  
Note: You should first set this item to On before performing system update time function.  
Press 4or OK to display the System Update Time screen, then set On time. When the TV is in  
System Update Time  
standby mode, the TV will automatically turn on at the preset time and detect OTA, then start  
system update.  
Press 3/4to select On to display the subtitles (if available) for the hearing impaired.  
Hearing Impaired  
(Only for digital programs)  
Select Off to turn off the function.  
Selects the digital audio output mode for S/PDIF. You can select Auto or PCM.  
SPDIF  
(Only for digital programs)  
Auto: Output audio signal by the rule: If current audio track is in Dolby Digital format, then Dolby  
Digital format will be selected. If current audio track is in MPEG, then PCM format will be selected.  
PCM: Output audio signal by PCM format.  
Note: To select Auto is recommended.  
Selects the audio track to output. You can select MPEG or Dolby Digital.  
Audio Preference  
(Only for digital programs)  
MPEG: If the program has MPEG and Dolby Digital tracks, select MPEG to output MPEG track in  
preference.  
Dolby Digital: If the program has MPEG and Dolby Digital tracks, select Dolby Digital to output  
Dolby Digital track in preference.  
Note  
! Manufactured underlicensefrom Dolby Laboratories.  
! Dolby and double-D symbol aretrademarksof Dolby Laboratories.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Rating and Lock Setup  
Password Setup  
The Password setup sub-menu is used to set a new system password or to change an existing system password. By default, the  
system password is 0000 and you may change it. To access Parental Guidance, to lock or unlock channels, to view locked  
channels, etc., thesystempassword isrequired.  
To create a new password  
Picture  
Sound  
Time  
Option  
Lock  
Channel  
Lock Tuni
Set Passw
Block Pro
Parental G
Restore Factory Default  
Please enter Password  
PressMENUand themain menuscreendisplays.  
Press3/4toselectLock menu, press6toaccessthemenu.  
1
2
3
- - - -  
Now a password is required to input. Use number buttons to input  
thecorrectpassword (thedefault password is0000).  
Menu  
Select  
Move  
Return  
Press 5or6to select Set Password item, and then press 4or  
OKbutton toaccessitssubmenu.  
Use thenumberbuttonstoinputa newpassword (4-digit).  
4
5
Picture  
Sound  
Time  
Option  
Lock  
Channel  
Lock Tunin
Set Passw
Block Pro
Please enter Password  
Inputthenewpassword again.  
Nowthenewpassword has beencreatedsuccessfully.  
New  
Confirm  
- - - -  
- - - -  
Parental G
Restore Factoy Defut  
Note  
! Be sure to write down your password and retain it for future use. If you  
do forget the password, the unit provides a super password “2580”.  
PleaseDONOTletyourchildrenknowthesuperpassword.  
Menu  
Select  
Move  
Return  
Block Program Setup  
The Block Program function blocks any channels that you do not want to  
watchor thatyoudo notwantyourchildrentowatch.  
Picture  
Sound  
Time  
Option  
Lock  
Channel  
Lock Tuning  
Off  
Navigate to the Lock menu and input the correct password to  
access.  
1
Set Password  
Block Program  
Parental Guidance  
No Block  
Use 5  
or6to highlight Block Program item, press 4or OK to  
Restore Factory Default  
2
3
access.  
Now the Block Program screen opens. Use 5  
channel you want to lock, then press GREEN button to set lock to  
thechannel. Alocksymbol appears alongside thelockedchannel.  
or6to select the  
Menu  
Select  
Move  
Return  
Block Program  
TV  
TV  
TV  
20 S-48  
21 S-51  
22 S-56  
Repeattheabove stepsfor eachprogram youwishtolock.  
4
5
Press MENU to return to previous menu. Press EXIT to exit the  
menu screen directly. Then the Block Program comes into effect  
for theLockedchannel.  
Note  
OK  
LOCK  
Select  
! To viewa lockedchannel, justinputthepassword.  
! To cancel channel lock, use password to enter into the Lock menu, and  
call up Block Program screen, then use GREEN button to unlock the  
channel, and thelocksymbol willdisappear.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Rating and Lock Setup (Continued)  
Parental Guidance Setup (DTV only)  
Parental Guidance blocks programs according to their classification so that  
childrencan notviewcertainprograms.  
Picture  
Sound  
Time  
Option  
Lock  
Channel  
Lock Tuning  
Off  
Set Password  
Block Program  
Parental Guidance  
No Block  
Navigate to the Lock menu and input the correct password to  
access.  
1
Restore Factory Default  
Press5or6tohighlighttheParental Guidanceitem.  
Menu  
Select  
Move  
Return  
2
3
G (General Audiences): Content not  
offensiveto most viewers.  
Use3or4to select your desired  
rating.  
PG (Parental Guidance Suggested):  
Content is such that parents may not want  
theirchildrentoviewtheprogram.  
Block All  
Block G and above  
Block PG and above  
Block M and above  
Block MA and above  
Block AV and above  
Block R and above  
No Block  
Use the “Block All” setting to completely  
block all viewing. The menu can still be  
accessed to unblock all programs.  
M (Mature Audience): Suitable for mature  
audience.  
MA(Mature Adult Audience): May contain  
mature themes, profane language, graphic  
violence, and sexual situations.  
AV (AdultAudience): Strongviolence.  
Press MENU to return to previous  
menu. Press EXIT to exit the menu  
screendirectly.  
R (Restricted viewing): Not for children  
under age 17. Strong elements of sex  
and/or violence.  
4
Lock Tuning Setup  
Making use of Lock Tuning you can protect some TV settings from being  
accidentallychanged.  
Picture  
Sound  
Time  
Option  
Lock  
Channel  
Navigate to the Lock menu and input the correct password to  
access.  
1
Lock Tuning  
Off  
Set Password  
Block Program  
Parental Guidance  
NowtheLockTuningitemwillbehighlightedautomatically.  
2
No Block  
Restore Factory Default  
Use3or4toturnon or turnoff theLockTuning.  
3
Once you turn on Lock Tuning, all items in Channel Menu can not be  
accessed by the user without the correct password. To cancel, use  
password toenterintoLockMenuand setLockTuningitemtoOFF.  
Menu  
Select  
Move  
Return  
Restoring Factory Default  
Runningthisfunction toresetall settingstoitsoriginal factory condition.  
Navigate to the Lock menu and input the correct password to  
access.  
1
Picture  
Sound  
Time  
Option  
Lock  
Channel  
Lock Tuning  
Are you sure?  
Press 5or6to select the Restore Factory Default item, press 4  
Set Password  
2
3
Block Progra
Parental GuidYes  
Restore Factory Default  
or OKtoactivatethefunction.  
No  
Now the screen will display a dialog box for you to confirm your  
operation. Use 3  
pressOKtoconfirm youroperation.  
or4to toggle between YES or NO item, and  
Menu  
Select  
Move  
Return  
Note  
! This function will clear most of your customized settings. So make sure you do want to reset  
all settingstoitsoriginal factory condition before youperform thisoperation.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Timer Setup  
Time Zone Selection  
To obtain local time, you should first set local time zone. and it depends on  
yourlocal stationwhetherhas broadcast timezoneinformation.  
Picture  
Sound  
Time  
Option  
Lock  
Channel  
PressMENUand themain menuscreendisplays.  
1
2
Clock  
28/Sep /2008 15:30  
Off Time  
On Time  
Off  
Off  
Press3or4toselectTime menu, press6toaccess.  
Off  
Sleep Timer  
Auto Sleep  
Off  
Press 5  
selecttheappropriate one.  
or6to select Time Zone item, and then press 3or4to  
3
Time Zone  
VIC GMT+10  
Menu  
Select  
Move  
Return  
Current Time Setup  
Makeuseof thisfunction can setthecurrenttimefor theTV.  
NavigatetotheTimemenu, press6toaccess.  
1
Press 5or6to select Clock item, Press4or OK to access the  
submenu.  
Picture  
Sound  
Time  
Option  
Lock  
Channel  
2
Clock  
Off Time  
On Time  
Sleep Timer  
Auto Sleep  
Time Zone  
28/Sep /2008 15:30  
Date  
Month  
Year  
28  
Sep  
2008  
15  
Within the menu, use 5or6to highlight the Date, Month, Year,  
3
Houror Minute item, and use3  
When finished, use 5or6to select Close and press OK to  
confirm thesetting.  
or4toadjustthevalues.  
Hour
Minute  
30  
Close  
Menu  
Select  
Move  
Return  
Note  
!Before settingOff timerand Ontimer, pleasesettheClockfor theTV.  
On Timer Setup  
WithOnTimerfunction On, theTVwillautomatically turnon atthepresettime.  
NavigatetotheTimemenu, press6toaccess.  
1
2
Press 5  
or6to select On Time item, Press 4or OK to access  
thesubmenu.  
Picture  
Sound  
Time  
Option  
Lock  
Channel  
Clock  
Off Time  
On Time  
28/Sep /2008 15:30  
Now the Activate item will be highlighted automatically, press  
or4to select On . (If you want to cancel setting, please choose  
Off )  
3
Activate  
On  
00  
00  
00  
3
Hour  
Minute  
Volume  
Sleep Timer  
Auto Sleep  
Press 5or6to select Hour or Minute item, and press 3or4to  
Mode  
DTV  
Time Zone  
22 ABC TV  
4
5
adjustthevalue.  
Close  
Menu  
Select  
Move  
Return  
After setting On Timer, you can press 5,6,3or4to navigate  
throughthefollowing threeoptions and adjusttheoptions .  
Option  
Volume  
Description  
Sets desired volume for the On program.  
Selects one source to be viewed through On timer.  
Selects a broadcasting program for On timer.  
Mode  
Program Number  
Whenfinished, use5or6toselectClose item and pressOKtoconfirm thesetting.  
6
7
Press to switch the TV to standby mode. At the preset time, the TV will  
auto turn on and broadcast the preset program at the preset volume.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Timer Setup (Continued)  
Off Timer Setup  
WithOff Timerfunction On, theTVwillautomatically turnoff atthepresettime.  
NavigatetotheTimemenu, press6toaccess.  
1
Press 5  
or6to select Off Time item, press 4or OK to access  
Picture  
Sound  
Time  
Option  
Lock  
Channel  
2
3
4
thesubmenu.  
Clock  
Off Time  
On Time  
Sleep Timer  
Auto Sleep  
28/Sep /2008 15:30  
Activate  
Hour  
On  
00  
00  
Now the Activate item will be highlighted automatically, press  
or4toselectOn. (If youwanttocancelsetting, pleasechoose Off )  
3
Minute  
Press 5or6 to  
to select Hour or Minute item, and press 3or4Time Zone  
adjustthevalue.  
When finished, use 5or6to select Close and press OK to confirm  
Close  
Menu  
Select  
Move  
Return  
thesetting.  
Note  
!OnceyouhavesetOntimeror Off timerfunction, theunitwillperform iteverydayatthepresettime.  
Sleep Timer Setup  
Sleep timer lets you select the amount of time before your TV turns itself off  
automatically. Thissettingiscleared whentheTVisturned off.  
Picture  
Sound  
Time  
Option  
Lock  
Channel  
Clock  
Off Time  
On Time  
Sleep Timer  
Auto Sleep  
Time Zone  
28/Sep /2008 15:30  
NavigatetotheTimemenu,press6toaccess.  
Press5or6toselectSleep Timer item.  
1
2
3
Off  
Off  
Off  
Off  
Press 3  
or4  
to select the amount of the time; to turn off the timer,  
VIC GMT+10  
pleaseselectOff.  
Menu  
Select  
Move  
Return  
Note  
! You maydirectlypressSLEEP buttonon theremotecontrol tosetsleeptimer.  
! After you have set sleep timer, when the last 30 seconds have come up, the Power Off screen will  
appear toremindyouafterhow manyseconds theTVwillpower off. You can pressanybuttontoquit.  
Auto Sleep Setup  
When there is no signal input for a certain time, the unit will turn off  
automatically.  
Picture  
Sound  
Time  
Option  
Lock  
Channel  
Clock  
28/Sep /2008 15:30  
Off Time  
On Time  
Sleep Timer  
Auto Sleep  
Time Zone  
Off  
Off  
NavigatetotheTimemenu, press6toaccess.  
Press5or6toselect Auto Sleep item.  
Press3or4toselectOnor Off.  
1
2
Off  
On  
VIC GMT+10  
3
Menu  
Select  
Move  
Return  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EPG Operation  
EPG  
The Electronic Programme Guide (EPG) makes it possible for users to see details about the programme they are watching,  
other programmes and even a schedule of the next 7 days. The information available includes the number and name of the  
channel, the name and type of programme, the start and end time, and a summary. Thus viewers can easily select the  
programmes theywanttosee.  
Operation  
Press the EPG button to open the EPG (Electronic  
PROGRAMME GUIDE  
1
DTV  
72 7 Digital 2  
Program Guide). In the EPG window (as shown on  
the right), several channels’ current and upcoming  
program’s information willbedisplayed.  
28 Jul 2008 15:03  
15:00 - 16:00 BLUE HEELERS  
28 Jul  
16:00  
DTV  
15:00  
7 7 Digital  
70 7 HD Digital  
71 7 Digital 1  
72 7 Digital 2  
BLUE HEELERS  
BLUE HEELERS  
BLUE HEELERS  
BLUE HEELERS  
BLUE HEELERS  
No information  
No information  
No information  
No information  
No information  
Press YELLOW button to highlight the date bar,  
2
use 3  
or4to select the proper date, and then  
pressYELLOWbuttonagain toexit.  
Use 5,6,3or4to navigate among the channels  
73 7 Digital 3  
and program events, and press INFO button to get  
more detailed information (if available) about the  
programme youchoose.  
TV/Radio  
Info  
OK  
DATE  
EXIT  
If you want to switch between TV and Radio  
programmes, pleasepressTV/Radio.  
PressOK totunetothechannelyouhaveselected.  
To cleartheEPGwindow, pressEXITbuttonor EPGbutton.  
3
Note  
! TheEPGwillonlyworkwhenyouarereceivingdigitalchannels.  
! To enableEPGtoworkproperly, itissuggestedtosettheappropriate timezone.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Teletext & Subtitle  
Teletext  
What Is Teletext?  
Your System receives Teletext signals broadcast by a TV network, and decodes them into graphical format for viewing.  
News, weather and sports information, stock exchange prices and programme previews are among the many services  
available.  
To Turn On/Off Teletext  
Selecta TVchannelproviding theTeletextprogram.  
PressTTX buttontodisplay theteletext.  
PressTTX buttonagain toswitchback toTVscreen.  
Teletext control button list  
!5/6button  
Usedtoscroll pageupward or downward.  
! 0–9button  
Directlyselectanypagebyusing0-9.  
! Colored buttons (RED/GREEN/YELLOW/BLUE)  
Colored areas are displayed at the bottom of the screen. The 4 colored  
buttonsareusedtoaccesstheitemsor corresponding pages.  
!Hold button  
Certain pages contain sub-pages which are automatically displayed  
successively. Thisbuttonisusedtostop or resumesub-pageacquisition.  
! Reveal button  
Press the button to reveal the concealed information such as games  
solutions. Pressthebuttonagain tohidetheinformation.  
! Size button  
Press this button several times to display the upper, then the lower part of  
thescreenand thenreturntothenormal sizeteletextpage.  
! Indexbutton  
Inteletextmode, pressthisbuttontodisplay theindexpage.  
! Mixbutton  
Press the button to display the Teletext on the screen with transparent  
background whileviewingtheTVprogram simultaneously.  
! Updatebutton  
Pressthebuttontoviewtheupdated teletextpage.  
Subtitle  
Whenwatchingdigitalprograms, pressSubtitlebuttontodisplay thesubtitle.  
If theprogram has subtitle, simplypressSubtitlebuttontodisplay subtitle.  
1
PressSubtitleagain tocancelthesubtitle.  
2
When watching analog programs, press this button to display the teletext  
subpage.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Screen Setup for D-SUB(PC) Mode  
Before adjustingthescreen, makesurethatyouselectthecorrectsource(D-SUB).  
Screen Setup  
PressMENUand themain menuscreendisplays.  
1
Press3or4toselectthe Picture menu, press6toaccessthemenu.  
2
3
Within the menu, press 5  
or 6to scroll through the page upward or downward until you select the Screen  
item, thenpress4or OKto access.  
Press5,6,3,4tonavigatethroughtheoptions or adjustan option. To confirm, pressOK.  
4
5
PressMENUtoreturntopreviousmenu. PressEXITtoexitthemenuscreendirectly.  
Picture  
Sound  
Time  
Option  
Lock  
Channel  
Picture  
Sound  
Time  
Option  
Lock  
Channel  
Color Temperature  
Aspect Ratio  
Noise Reduction  
Light Sensor  
Light Status  
Screen  
Cool  
16:9  
Off  
On  
Auto Adjust  
Horizontal Pos.  
Vertical Pos.  
Size  
Phase  
50  
50  
0
Dark  
60  
Prev Page  
Next Page  
Select  
Move  
Select  
Move  
Menu  
Menu  
Return  
Return  
Option  
Description  
Auto adjust  
Selects and activates to start auto adjustment. The set automatically adjusts the image settings,  
such as position and phase.  
Moves the image on the screen left or right.  
Moves the image on the screen up or down.  
Horizontal Position  
Vertical Position  
Size  
Adjust the horizontal width of the image on the screen.  
Improves the focusing of a stable image.  
Phase  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Hotel Mode Setup  
Hotel Mode Setup  
PressSOURCE button. TheInputSourcemenuopens.  
1
Hotel Mode  
2
Press numberbuttons:[1, 4, 7]toaccesstheHotel Modescreen.  
Channel Preset Lock  
Volume Max  
AV Lock  
Off  
100  
Off  
Off  
Within the menu, press 5,6,3,4to navigate through the options  
or adjustan option.  
3
Panel Lock  
Press OK to save the setting. Press MENU or EXIT to exit the  
menuscreendirectly.  
4
Press < OK > to save  
Option  
Description  
Channel Preset Lock Press 3/4  
to select On to lock the Channel menu and Lock Tuning item in Lock menu.  
Select Off to release.  
Note: When the item is set to On, the Channel menu and Lock Tuning item will be grayed out and unselectable.  
Press 3/4  
Press 3/4to select On to lock the input source of the unit to AV.  
Select Off to return to normal operation.  
Note: If AV Lock is set to On, options except AV in the Input Source menu will be grayed out and unselectable.  
to set the maximum volume (30 -100) for the unit.  
Volume Max  
AV Lock  
Panel Lock  
Press 3/4to select On or Off.  
When the Panel Lock is set to On, buttons on the control panel on the main unit are not  
active. To restore, please set it to Off.  
Note  
! When you press keys:[ 1, 4, 7 ] to call up Hotel Mode screen, please make sure to finish the inputing when the Input  
Sourcemenu isstillvisible.  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
If, after reading these operating instructions, you have additional questions related to the use of your television, please call the  
servicescenterinyour local area.  
Before calling service, please checkthesymptoms and follow suggestedsolutions.  
Remote Control  
Problem  
Possible Solutions  
! Thebatteriescould beweak. Replacethebatteries.  
! Checktheorientationof thebatteries.  
Remotecontrol does notoperate  
! Makesurethepower cord ispluggedin.  
Video and Audio  
Problem  
Possible Solutions  
Nopicture(screennotlit),  
Nosound  
! Makesurethepower cord ispluggedin.  
! PressPOWER on theTVor on theremotecontrol.  
! Tryanotherchannel; itcould be station trouble.  
Dark, poor or no picture  
(Screenlit), good sound  
! Selecta proper picturemode.  
! Adjustthebrightnessinthevideosetting.  
! Checktheantennaconnections.  
Nocolor/dark picture/color  
isnotcorrect  
! Adjustthecolor saturation inthevideo setting.  
Onlysnow and noiseappear  
on thescreen  
! Checktheantennaconnections.  
! Tryanotherchannel;itcould bestationtrouble.  
Dottedlinesor stripes  
! Adjusttheantenna.  
! MovetheTVawayfromnoisesourcessuchascars, neonsigns, orhairdryers.  
Double images  
! Usinga highlydirectional outdoor antennaor a cable maysolvetheproblem.  
Good picture, no sound  
! Thesound maybemuted. PressMUTEagain tocancel.  
! Makesurethestereomode issettostereoor mono.  
Audio noise  
! Communication problems may occur if infrared communication equipment (e.g.,  
infrared cordless headphones) is used near the TV. Move the infrared  
communication equipmentaway from theTVuntilthenoiseiseliminated.  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
General  
Problem  
Possible Solutions  
! These channels may be locked. Please unlock them (see <Rating and Lock Setup>  
section).  
! These channels may be set skipped in the channel list. You may set it to not skipped or  
selectthemwith0-9numberbuttons.  
One or some channels can’t be  
displayed  
Lostpassword  
! You mayusethesuperpassword (2580).  
Someitemscan’tbeaccessed  
! If a setting option appears in gray, this indicates that the settings option is unavailable  
incurrentinputmode.  
TVcabinetcreaks  
! When the TV is in use, there is a natural rise in temperature, causing the cabinet to  
expand or contract and may be accompanied by a slight creaking noise. This is not a  
malfunction.  
Some settings (such as volume  
setting, etc.)may not be memorized  
when the TV loses power or you  
press main Power Switch to turn off  
theTV.  
! After you make some settings or adjustments, and within 30 seconds you turn off the  
TV by main Power Switch or the TV loses power, then the settings you have made  
within 30 seconds may not be memorized. But you can use Power button to switch  
the TV to standby mode before cutting off the power, then the settings can be  
memorized.  
! Disconnect the power cord and wait for a few seconds. Then re-plug the power cord  
Controlbuttonsdo notoperate  
and turnon theunitagain.  
Note  
If your problem is not solved, turn your unit off and then on again.  
Cautions:  
Never attempt to repair a defective TV yourself.  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Type:  
LCD TV  
Display Size diagonal:  
Power Supply:  
Power Consumption:  
Dimensions(mm):  
Unit Weight(kg):  
TV System:  
106cm (42 inch)  
AC220-240V 50/60Hz  
180W  
1007 (W) x 700 (H) x 300 (D)  
21  
Analogue: CCIR(PAL-B/G, NTSC(AV))  
Digital: DVB-T(2K/8K OFDM)  
Note  
! Design and specifications are subject to change without notice.  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Assembling the stand and removing the stand column(Option)  
If the standis provided, please readthese instructions thoroughlybefore attemptingthis installation.  
SafetyPrecautions:  
1. Pleaseread theseinstructionsthoroughlypriorto attemptingthisinstallation.  
2. Be sure to handle this product very carefully when attempting assembly. If you are unsure of  
your capability, or the use of tools necessary to complete this activity, refer to a professional  
installer or service personnel. The manufacturer is not responsible for any damages or  
injuriesthatoccur dueto mishandlingorimproper assembly/installation.  
3. When using a table or bench as an aid to assembly, be sure to put a soft cushion or covering to  
preventaccidental scratchingor damageto theunit'sfinish.  
4. The speaker is not intended to support the weight of this display. Do not move or handle this  
product from the speaker; which can cause damage to the display not covered under the  
manufacturer's warranty.  
To install the stand:  
1. Removethestand fromtheboxand placeitona tableorbench.  
You must pay attention to the direction of the stand. The wide portion of the stand should go towards  
thefrontof theTV.  
2. Lay your TV flat (screen down) on the edge of a table or bench. Make sure that you put down a soft  
cushionorclothso thatyourTVis notscratched.  
3. Insert the stand column into the stand socket, move the column steadily until the Locators on the  
column align with the locating grooves on the stand. And align the holes in the stand with the holes in  
thestand column, thensecurethestand to thecolumnwith fiveM5screws(provided).  
Locators  
Locating grooves  
Stand  
M5 screws  
To removethestand fromtheTV, performthesestepsinreverseorder.  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Assembling the stand and removing the stand column(Option)  
To remove the stand column:  
1. Lay your TV flat (screen down) on a table or bench. Make sure that you put down a soft cushion or cloth  
so thatyour TVisnotscratched.  
2. Removethefour screws holdingthestand columnto yourTV, thenremovethestand column.  
Remove four screws  
Stand column  
Note  
The appearance of this product in these illustrations may differ from your actual product, and is for  
comparative purposes only.  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5944035780  
Ver. 1.0  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Radio Shack Door 63 1123 User Guide
Raymarine GPS Receiver RS12 User Guide
RCA Portable CD Player RP2730 User Guide
Rheem Water Heater GX90 550 User Guide
Rolls Car Stereo System DB24 User Guide
Samsung Bluetooth Headset GH68 19203A User Guide
Samsung Clothes Dryer DV409AEW User Guide
Sanus Systems Indoor Furnishings PFV59S User Guide
Sanyo Microwave Oven SM GA0005 User Guide
Sanyo Projector PLV HD100 User Guide