LCD TV
MODEL LCD-19E30A
LCD-26E30A
LCD-32E30A
LCD-42E30FA
Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY INSTRUCTIONS
All the safety and operating instructions should be
read before the product is operated.
Do not install the LCD TV near the ventilation duct of
air-conditioning equipment.
Read all of the instructions given here and retain them
for later use. Unplug this LC D TV from AC power
supply before cleaning. Do not use liquid or aerosol
cleaners. Use a damp cloth for cleaning.
This LCD TV should be operated only from the type
of power source indicated on the marking label. If you
are not sure of the type of power supplied,onsult your
authorized dealer or local power company.
Follow all warnings and instructions marked on the
LCD TV.
Do not overload wall outlets and extension cords as
this can result in fire or electric shock. Do not allow
anything to rest on the power cord. Do not locate this
LCD TV where the cord may be damaged by persons
walking on it.
For added protection to the LCD TV during a lightning
storm, or when it is left unattended and unused for
long periods of time, unplug it from the wall outlet. This
will prevent dam age due to lightning and power line
surges.
Do not attempt to service this LCD TV yourself
as opening or removing covers may expose you
to dangerous voltage or other hazards. Refer all
servicing to qualified service personnel.
Do not expose this unit to rain or use near water...for
example, in a wet basement, near a swimming pool,
etc...
Unplug this LCD TV from wall outlet and refer
servicing to qualified service personnel under the
following condition:
Do not use attachments not recommended by the
manufacturer as they may cause hazards.
a. When the power cord or plug is damaged or rayed.
b. If liquid has been spilled into the LCD TV.
Do not place this LCD TV on an unstable cart,stand,
or table. The LCD TV may fall, causing serious injury
to a child or adult, and serious damage to the LCD
TV. Use only with a cart or stand recommended by
the manufacturer, or sold with the LCD TV. Wall or
shelf mounting should follow the manufacturer’s
instructions, and should use a mounting kit approved
by the manufacturers.
c. If the LCD TV has been exposed to rain or water.
d. If the LCD TV does not operate normally byfollowing
the operating instructions. Adjust only those controls
that are covered by the operating instructions as
improper adjustment of other controls may result in
damage and will often require extensive work by a
qualified technician to restore the LCD TV to normal
operation.
An appliance and cart combination should be
moved with care. Quick stops, excessive force, and
uneven surfaces m ay cause the appliance and cart
combination to overturn.
e. If the LCD TV has been dropped or the cabinet has
been damaged.
f. When the LCD TV exhibits a distinct change in
performance-this indicates a need for service.
Slots and openings in the back and
bottom of the cabinet are provided for
ventilation, to insure reliable operation
of the equipment and to protect it from
overheating.
When replacement parts are required, be sure
theservice technician has used replacement parts
specified by the manufacturer that have the same
characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock, or injury
to persons.
The openings should never be covered with cloth or
other materials, and the bottom opening should not
be blocked by placing the LCD TV on a rug, or other
similar surface. This LCD TV should never be placed
near or over a radiator or heat register.
Upon completion of any service or repairs to this
LCD TV, ask the service technician to perform routine
safety checks to determine that the LCD TV is in safe
operating condition.
This LCD TV should not be placed in a built-
in installation such as a book case unless proper
ventilation is provided.
Never push objects of any kind into this LCD TV
through cabinet slots as they may touch dangerous
voltage points or short out parts that could result in a
fire or electric shock. Never spill liquid of any kind on
the LCD TV.
Do not place item s such as vases containing liquid on
top of the LCD TV.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE
SAFETY INSTRUCTIONS ........................3
FEATURE AND DESIGN ...........................5
SETUP...................................................27
TIMER........................................................
FUNCTION ................................................
PREPARATION..........................................6
MENU OPERATION (PC/HDMI mode)....35
PICTURE ...............................................35
AUDIO....................................................35
SETUP...................................................36
TIMER....................................................36
FUNCTION ............................................36
PARTNAMES AND FUNCTIONS.............6
PREPARATION..........................................7
CONNECTING LCD TV .............................8
CONNECTING THE AC POWER CORD.8
CONNECTING OUTDOOR AERIAL........8
CONNECTING A COMPUTER ................9
CONNECTING VIDEO EQUIPMENT ....10
APPENDIX...............................................37
CLEANING LCD TV...............................37
FUNCTION OF PRODUCT SAFETY
BEFORE OPERATION ............................11
OPERATION OF REMOTE CONTROL.11
TURNING ON/OFF LCD TV ..................15
SELECTING INPUT SOURCE ..............15
CHANNEL SELECTION.........................15
SELECTING CHANNEL SOURCE........16
SOUND SYSTEM ..................................16
COLOUR SYSTEM................................16
DISPLAY................................................16
VOLUME CONTROL .............................17
ECO .......................................................17
VIRTUAL SURROUND ..........................17
STILL......................................................17
STEREO/MONO....................................17
ASPECT RATIO.....................................18
TIMMER SETTING ................................19
SPORTS ................................................19
TEXT / TV ..............................................19
TEXT CANCEL ......................................20
TEXT INDEX..........................................20
TEXT SUBCODE...................................20
TEXT SIZE.............................................20
TEXT HOLD...........................................20
TEXT RED .............................................20
TEXT GREEN........................................20
TEXT YELLOW......................................20
TEXT BLUE ...........................................20
FEATURE ..............................................37
TROUBLESHEETING............................38
specifications .........................................39
MENU OPERATION (TV/AV mode) ........21
TUNING THE TV FOR THE FIRST TIME 21
PICTURE ...............................................22
AUDIO....................................................25
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURE AND DESIGN
Ƈ
Picture
Ƈ
Ƈ
Feature
•
LCD Panel
•
•
Auto ECO
1920 x 1080 pixel Full HD LCD Panel makes perfect
reproduction of 1080p/1080i HD contents in pixel-to-
pixel. ( for 42” HD panel)
Automatically adjust by ECO 1/ECO 2/ECO 3.
Light Senson formation
Ambient light sensor automatically adjusts
picture brightness to provide more relaxing view for
your eyes. (see page 16)
1366 x 768 pixel LCD Panel markes perfect
Reproduction of 1080p/1080i HD contents in pixel-
transfer to -pixel.
•
•
Video Enhance Engine
Compatibilty
Video Enhance Engine, SANYO Hight Quality image
Processing Technology rocessing clear. dynamic,
natural and realistic Picture along with HD/SD LCD
Panel Technology.
•
•
•
Full Multy System
PAL, SECAM, NTSC, NTSC 4.43 system can be
connected. (see page 16)
Dynamic AC
HD-Ready
The AC (Automatic image Control) circuit
compensates picture contrast and brightness level
dynamically and reproduces bright and hight-contrast
picture. (see page 22,23)
1080p, 1080i, 720, High Definition signals are
receivable.
HDMI
HDMI provides complete transmission of digital image
and sound signals without any quality deterioration.
DVI can be connected to HDMI.
Ƈ
Sound
•
NICAM/A2 Stereo
•
•
PC Input
It’s the Stereo Sound PAL Color TV Broadcasting
System upgrading Mono-sound TV serice to stereo or
dual-language sound.(see page 25)
Personal Computer/Laptop can be connected
with automatic resolution adjustment.
Terminals
•
•
Bass Boost
HDMI for BluRay Player etc.
D -SUB 15-pin for PC input etc.
Component Video for DVD
S-Video/Video for VCR /DVD
Bass Boost providing powerful sound markes viewing
experience bass Boost sound. (see page 24)
Virtural Surround
Virtural Surround providing powerful sound markes
viewing experience Virtural Surround.
Ƈ
Others
•
•
Wall Mounting
Ƈ
Feature
It’s designed for VESA Standard wall hanging bracket.
•
Super Mode
Light Commertial Mode
Just by pressing the button, sport mode optimizes
picture and audio settings suitable for each sport
program.
By entering Dealer m ode, Volume Lock, Sart Mode,
OSD, RC, Reset, AC Power Mode can be selected.
Convenient for placing in Hotel, Hospital, School, S
tore, Bank etc.
(see page 19)
Ŷ
Colorful World
Dynamic picture and sound performance setting
(Default setting).
Ŷ
Ŷ
Ŷ
Green Field
Suitable setting for Football, Golf program etc.
Snow World
Suitable setting for Skiing, Ice Skating program etc.
Water World
Suitable le setting for Swimming, Diving program
etc.
Ŷ
Indoor Sport
Suitable setting for Basketball, Boxing program etc.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
PREPARATION
PARTNAMES AND FUNCTIONS
FRONT
For exsample : 26”
Side Controls
Panel
Indicator
For exsample : 26”
INDICATORS
For exsample : 26”
IR
Light Sensor
LED
CARE FOR USING LCD TV
•
•
Do not bump or scratch the panel surface as this causes flaws on the surface of the screen.
There may be some tiny black points and/or blight points on the SCREEN. These points are normal.
Download from Www.Somanuals.com. All Manuals Search And Download.
PREPARATION
(Each button on the control panel has the same function with its counterpart on the remote control.)
SIDE CONTROLS
>PC<
POWER ON/OFF button
Used to turn the LCD TV ON or OFF.
For exsample : 26”
POWER
CHANNEL UP/DOWN buttons
Used to Change channels.
Used to select items.
CHANNEL
VOLUME UP/DOWN buttons
Used to adjust the volume.
Used to adjust the value of the
selected item on On-Screen Menu.
Used to execute the seleted menu on
On-Screen menu.
VOLUME
MENU
INPUT
OK
MENU button
Open or Close the On-Screen Menu.
INPUT MODE button
Used to select input source:DTV, AV1,
AV2, AV3, HDMI 1, HDMI 2, HDMI 3,
PC, ATV.
BACK TERMINALS
19”
DVI
INPUT1
HDMI Input Terminal
Y
Connect all kinds of HDMI output equioment
to this terminal.
• HDMI Cable
Pb
Pr
L
PC INPUT
RS232 INPUT
S-VIDEO
VIDEO
PC AUDIO DIGITAL AUDIO
INPUT
OUTPUT
VIDEO
L
R
R
L
ANT
R
PC Input Terminal
VIDEO
VIDEO3
OUTPUT INPUT VIDEO1 INPUT
Connect computer outputs to these terminals
• RGB (D-SUB)
26”
PC Audio Input Terminal
Connect computer outputs to these terminals
• Audio (L/R)
DVI
INPUT1
INPUT2
HDMI Input Terminal
Connect all kinds of HDMI output
equioment to this terminal.
• HDMI Cable
VIDEO Output Terminal
Connect a television, video recorder
or external audio amplifier to these
jacks.
Y
RS-232 Input Terminal
Pb
PC INPUT
RS232 INPUT
S-VIDEO
DIGITAL AUDIO OUTPUT Terminal
VIDEO
Pr
L
PC AUDIO DIGITAL AUDIO
INPUT
OUTPUT
VIDEO
L
L
R
R
ANT
R
Aerial Jack
VIDEO
OUTPUT
VIDEO3
INPUT VIDEO1 INPUT
Connect the cable with a plug from aerial jack
to the aerial socket on the cabinetback.
• Video (RCA type)
• Audio L and R (RCA type)
VIDEO Input Terminal
Connect video and audio output from video
equipment.
• Video (RCA type)
• Audio L and R (RCA type)
• S-Video (mini Din 4 type)
Video Input Terminal
Connect video and audio output from
video equipment.
• DVD component (RCA type)
• Audio L and R (RCA type)
32”/42”
DVI
INPUT1
INPUT2
INPUT3
HDMI Input Terminal
Y
Connect all kinds of HDMI output equioment
to this terminal.
• HDMI Cable
Pb
PC INPUT
RS232 INPUT
S-VIDEO
VIDEO
Pr
L
PC AUDIO DIGITAL AUDIO
INPUT
OUTPUT
VIDEO
L
L
R
R
ANT
R
VIDEO
VIDEO3
OUTPUT INPUT VIDEO1 INPUT
7
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTING LCD TV
CONNECTING THE AC POWER CORD
For exsample : 26”
This LCD TV uses nominal input voltages of 100-240V
AC. This LCD TV automatically selects the correct input
voltage. It is designed to work with single-phase power
systems. To reduce risk of electrical shock, do not plug
into any other type of power system . Consult your
authorized dealer or service station if you are notsure of
the type of power being supplied.
Connect the LCD TV with all peripheral equipment
before turning the LCD TV on.
AC POWER CORD
CAUTION
For safety, unplug AC power cord when the LCD
TV is not in use.
To the AC Outlet (100-240V AC) Pulls the
AC power cord out from the LCD TV. The
AC outlet must be near this equipment
and must be easily accessible.
CONNECTING OUTDOOR AERIAL
For exsample : 26”
Cable used for connection (This Outdoor
Aerial cable is not supplied with this LCD TV.)
•
Aerial Cable
NOTE:
ANT
For all aerial circuit problems please consult
your local dealer.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTING LCD TV
CONNECTING A COMPUTER
Cable used for connection (This cable is not supplied
with this LCD TV.)
NOTE:
When connecting the cable, AC Power
Cords of both LCD TV and external
equipment should be disconnected from
AC outlet. Turn LCD TV and peripheral
equipment on before your computer is
switched on.
•
•
•
PC/VGA Cable (D-SUB 15pin)
HDMI Cable
MAC Adapter (in the case of connecting Macintosh
computer)
•
Audio Cable [Mini Plug (L/R)]
IBM-
Desktop Type
Laptop Type
compatible
computers
or Macintosh
computers
(VGA/SVGA/
XGA)
For exsample : 26”
HDMI Output
HDMI Input
PC Input
DVI
INPUT1
INPUT2
Monitor
Output
MAC
Adapter
Y
Pb
PC INPUT
RS232 INPUT
S-VIDEO
Pr
L
Audio Output
(stereo)
PC AUDIO DIGITAL AUDIO
INPUT
OUTPUT
Audio Input
(stereo)
VIDEO
L
R
ANT
R
VIDEO
OUTPUT
VIDEO3
INPUT
VIDEO1 INPUT
NOTE : You can connect the DVI source to HDMI input terminal by using the DVI to HDM I converter, and you just
can watch image, but without sound.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTING LCD TV
CONNECTING VIDEO EQUIPMENT
Cables used for connection (These cables are not supplied with this LCD TV.)
•
•
•
•
Video Cable (RCA X 1), S-Video Cable, Audio Cable (RCA X2) : Video 1 or Video 2
Video Cable (RCA X3), Audio Cable (RCA X 2) : DVD (Component Video)
Video Cable (RCA X 1), Audio Cable (RCA X2) : Monitor Outputs
HDMI Cable: HDMI Input
NOTE : When connecting the cable, AC Power Cords
of both LCD TV and external equipment should be
disconnected from AC outlet.
HDMI cable
HDMI Output
HDMI Input
DVI
INPUT1
INPUT2
Composite
Video and
Y
Audio Output
Pb
Video cable
(RCA x1)
PC INPUT
RS232 INPUT
Audio Amplifier
S-VIDEO
V
Pr
L
Audio
Speaker
(stereo)
PC AUDIO DIGITAL AUDIO
INPUT
OUTPUT
VIDEO
L
External
Monitor
R
ANT
R
Audio cable
(RCA x2)
VIDEO
OUTPUT
VIDEO3
INPUT
External Audio
Equipment
VIDEO1 INPUT
For exsample : 26”
Component Video Source
(example)
DVD
(RCA x3)
DVD video equipment
(such as DVD player
or high-definition TV
source)
S-Video cable
S-Video output
Video Source (example)
Video Cassette Video Disc
Recorder
Player
Audio cable
(RCA x2)
Video and Audio
cable (RCA x3)
AV OUT
Note:
Video (RCA) output is for TV, AV or S-VIDEO only.
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE OPERATION
OPERATION OF REMOTE CONTROL
MUTE
POWER
POWER ON/OFF
NUMBER KEY
MUTE
1
4
2
5
8
0
3
6
7
9
TXT REVEAL
INFO
INPUT
INFO/TXT REVEAL
SPORTS
INPUT
SPORTS
ECO
TXT/TV
TXT/TV
SUBTITLE
WIDE
ECO
A/B
VOL
CH
VOLUME +/-
POWER OFF
CHANNEL +/-
FAV/LIST
POWER OFF POWER ON EPG
FAV/LIST
POWER ON
OK
GUIDE
PROGRAM KEY
OK
TXT
INDEX
BACK
MENU/TXT INDEX
TXT SIZE
BACK
MENU
TXT HOLD
TXT SUBꢀ TXT SIZE TXT HOLD TXT CNL
STILL
P
P
TXT SUB
TXT RED
TXT CNL
TXT BLUE
TXT YELLOW
TST GREEN
CS-90283U
Note: In different mode, some buttons have different functions.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE OPERATION
OPERATION RANGE
Point Remote Control toward LCD TV (Infrared
Remote Receiver) whenever pressing the buttons.
Maxim um operating range for Remote Control is
about 16.4’(5m ) in front, about 30°to the left or the
right, about 15°for up or down.
o
o
15
15
30o 30o
5m
REMOTE CONTROL BATTERIES INSTALLATION
Remove the battery compartment cover .
Insert two size AAA batteries (1.5V ) according
2
1
to “+” and “-” polarity markings inside the battery
compartment.
Close the battery compartment cover.
3
To insure safe operation, please observe the following precautions:
•
•
•
•
•
•
•
•
•
Use (2) AAA, alkaline batteries.
Replace two batteries at the same time.
Do not use a new battery with a used battery.
Avoid contacting with water or liquid.
Do not expose the Remote Control or Batteries to moisture, or heat such as sunshine,fire or the like.
Do not drop the Remote Control.
If a battery has leaked on the Remote Control, carefully wipe case clean and install new batteries.
Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE OPERATION
ON-SCREEN MENU
TV/AV MODE MENU LIST
Note : “SET UP” menu is only active in TV mode.
MAIN MENU (CHANNEL MENU)
DTV Menu...〔PICTURE〕
Picture Mode
Color Temp
Aspect Ratio
Backlight
DNR
Auto Conrrast Enhancement
On
Dynamic
Picture Mode
Contrast
Brightness
Color
Sharpness
Tint
50
50
50
0
0
OK
MENU
BACK
Cancel
Confirm
Return
Navigate
PICTURE MENU
DTV Menu...〔PICTURE〕
Picture Mode
Color Temp
Aspect Ratio
Backlight
DNR
Auto Conrrast Enhancement
On
Picture Mode
Dynamic
Contrast
Brightness
Color
Sharpness
Tint
50
50
50
0
0
OK
MENU
BACK
Confirm
Return
Navigate
Cancel
Cancel
Cancel
AUDIO MENU
DTV Menu...〔AUDIO〕
MTS
Dual
Selectable Sound
Bass Boost
Virtal Surround
Auto
OK
MENU
BACK
Confirm
Return
Navigate
SETUP MENU
DTV Menu...〔SETUP〕
Language
English
Menu Language
Country/Region
Full Search
Quick Search
Manual Search
Channel List
Fav Group: 1
OK
MENU
BACK
Confirm
Return
Navigate
TIMER MENU
DTV Menu...〔TIMER〕
Time Setting
Current Time
Power Control
Banner Duration
2008
-
01
-
06
19
:
57
:
29
WakeUp Timer
Sleep Timer
After 00 Hours
After 00 Hours
00 Minutes
00 Minutes
OK
MENU
BACK
Cancel
Confirm
Return
Navigate
FUNCTION MENU
DTV Menu...〔FUNCTION〕
Reset to default
AV Connection
Password
Parental Rating
Channel Lock
EPG
OK
MENU
BACK
Cancel
Confirm
Return
Navigate
13
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE OPERATION
ON-SCREEN MENU
PC/HDMI MODE MENU LIST
MAIN MENU (PICTURE MENU)
DTV Menu...〔PICTURE〕
Picture Mode
Color Temp
Aspect Ratio
Backlight
Contrast
Brightness
Color
50
50
50
VGA Set
OK
MENU
BACK
Cancel
Confirm
Return
Navigate
PICTURE MENU
DTV Menu...〔PICTURE〕
Picture Mode
Color Temp
Aspect Ratio
Backlight
Contrast
Brightness
Color
50
50
50
VGA Set
OK
MENU
BACK
BACK
BACK
Confirm
Return
Navigate
Cancel
Cancel
Cancel
AUDIO MENU
DTV Menu...〔AUDIO〕
MTS
Dual
Selectalbe Soun
Bass Boost
d
Auto
Virtal Surround
OK
MENU
Return
Confirm
Navigate
SETUP MENU
DTV Menu...〔SETUP〕
Language
English
Menu Language
OK
MENU
Confirm
Return
Navigate
TIMER MENU
DTV Menu...〔TIMER〕
Time Setting
Current Time
Power Control
Banner Duration
208
-
10
-
60
19
:
75
:
92
WakeUpTimer
SleepTimer
fAter
0
Hours
0
Minutes
After
0
Hours
0
Minutes
OK
MENU
BAC
K
Confirm
Return
Navigate
Cancel
FUNCTION MENU
DTV Menu...〔FUNCTION〕
Reset to default
AV Connection
OK
MENU
BACK
Cancel
Confirm
Return
Navigate
Note : 1. “PC ADJUST” is only active in PC mode.
2. SOUND/TIMER/OSD menu in PC/HDMI mode is the same as TV/AV mode, please refer to page 13~14.
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATION
TURNING ON/OFF LCD TV
!
1
Complete the peripheral connections before turning on LCD TV. (Please refer to “CONNECTING LCD
TV”.)
!
!
Connect LCD TV ‘s AC Power Cord into an AC outlet.
2
3
Press POWER ON/OFF button on Side Controls of LCD TV or on Remote Control to turn it ON. The
POWER indicator will light up (green). Press POWER ON/OFF button again to shift it to stand-by status,
the POWER indicator will become red.
NO SIGNAL SHUT OFF
This TV set incorporates the NO SIGNAL SHUT OFF function. If no signal is input in TV mode, “OFF 00:15”
will display for about 15 minutes and TV will be turned off automatically.
SELECTING INPUT SOURCE
Select mode “DTV”, “VIDEO 1”, “VIDEO 2”, “VIDEO 3”, “HDMI 1”,“HDMI 2”,
“HDMI 3”,“PC”,“ATV”, by pressing INPUT button on Remote Control or on Side
Controls.
CHANNEL SELECTION
There are 256 channels can be selected on the LCD TV.
DIRECT SELECTION
For direct access to program using the (0-9) numeric button.
1) For selection of channel position 0-9. Example: For channel position 8, press the “8”button.
2) For selection of channel position 10 - 99. For channel position 25, press the DIGIT button to display “- -”,
then press “2” and “5” buttons.
3) For selection of channel position 100 - 199. For channel position 125, press the DIGIT button twice to
display “1 “, then press “2” and “5” buttons.
4) For selection of channel position 200 - 255. For channel position 235, press the DIGIT button three times
to display “2 “, then press “3” and “5” buttons.
CHANNEL UP/DOWN
3UHVVꢀ32,17ꢀŸꢁźEXWWRQVꢀRQꢀ6LGHꢀ&RQWUROVꢀRUꢀRQꢀ5HPRWHꢀ&RQWUROVꢀWRꢀVHOHFWꢀSURJUDPVꢂ
Ɣꢀ3UHVVꢀ32,17ꢀŸꢀEXWWRQꢀWRꢀVHOHFWꢀQH[WꢀFKDQQHOꢂ
Ɣꢀ3UHVVꢀ32,17ꢀźꢀEXWWRQꢀWRꢀVHOHFWꢀSUHYLRXVꢀFKDQQHOꢂ
15
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATION
SELECTING CHANNEL SOURCE
Press
button to switch between the previous channel and the current channel.
For example, now you are watching channel “4”, but you watched channel “2” previously. If you press
button, channel “2” will appear immediately.
SOUND SYSTEM
Press SOUND SYSTEM button repeatedly to select “D/K”, “I”, “B/G “ or “Auto” until the best sound effect is
reached.
COLOUR SYSTEM
Press COLOUR SYSTEM button then you can see display.
DISPLAY
Press DISPLAY button on Remote Control to display the status of LCD TV. Press again to remove the
display.
ATV
DTV
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATION
VOLUME CONTROL
To adjust the volume value desired by pressing POINT buttons on Remote Control or on Side Controls.
The volume dialogue box will appear on the screen for a short while.POINT button to increase volume, and
POINT button to decrease volume.
ECO
This function is used to automatically adjust panel’s brightness by ambient brightness. Press ECO button on
Remote Control to set “ECO 1“, “ECO 2 “, “ECO 3 “ or “ECO OFF”.
VIRTUAL SURROUND
Wonderful Virtual Surround has set in the TV, you can enjoy splendid Virtual Surround effect in your family.
Press Menu button on Remote Control to set “Virtual Surround On “ or “Virtual Surround OFF”.
Select this mode for user to call out the preset sound adjustment in SOUND menu.
STILL
Press TXT HOLD button to switch the still function On or Off.
When in PIP mode, still function can still main picture.
To cancel “Still” function:
Press TXT HOLD button or PIP button to cancel the function, or you can switch the input source to cancel
it also.
Note:When the still function is On, the picture will still, but thesound will be remain.
The function doesn’t work when the input signal is 1080p.
STEREO/MONO
Simply press STEREO/MONO button to select the following audio signals: “STEREO “, “MONO “, “NICAM “,
“A “ and “B “.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATION
ASPECT RATIO
Select screen size among “Wide”, “Super Live 2 “, “Cinema2”,
“4:3”,“Super Live 1”,“Cinema 1”, “Subtitle”,“14:9” and “Auto” by
pressing WIDE button on Remote Controls.
WIDE button
*Only “Wide”and“4:3” mode can be selected when the input
mode is “VGA”, “HDMI” and the input signal is 1080i, 720p or
1080p.
WIDE
Use this setting when watching a widescreen DVD,widescreen
video tape or a 16:9 broadcast (when available).
Due to the range of widescreen formats (16:9,14:9,20:9 etc.)
black bars may be visible on the top and bottom of the screen.
WIDE
SUPRLIVE
SUPER LIVE 2
2
If a‘side panel format’signal is being received this setting will.
enlarge the image to fit the screen by stretching the image
horizontally and vertically, holding better proportions at the
centre of the image. Some distortion may occur.
CINEMA
2
CINEMA 2
When watching ‘all sides panel format’ films/video tapes, this
setting will eliminate or reduce the black bars at all sides of
the screen by zooming in and selecting the image without
distortion.
4:3
4:3
Use this setting to view a true 4:3 broadcast.
SUPER LIVE 1
SUPRLIVE
1
This setting will enlarge a 4:3 image to fit the screen by
stretching the image horizontally and vertically, holding better
proportions at the centre of the image. Some distortion may
occur.
CINEMA
1
CINEMA 1
When watching ‘letterbox format’ films/video tapes, this setting
will eliminate or reduce the black bars at the top and bottom
of the screen by zooming in and selecting the image without
distortion.
SUBTITLE
SUBTITLE
14:9
When subtitles are included on a letterbox format broadcast, this.
setting will raise the picture to ensure.
that all the text is displayed.
SUBTITLE
14:9
Use this setting when watching a 14:9 broadcast.
Auto
Auto
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATION
TIMMER SETTING
To set TIMER SETTING by pressing TIMER Menu on remote control. The timer dialogue box will appear on the
screen for a short while.
To select “WakeUP Timer” or ” Sleep Timer” with TIMER buttons.
SPORTS
Select sports mode “Field Game”, “Winter Sport”, “Marine Sport”,
and “Indoor Sport” by pressing SPORTS button repeatly on
SPORT button
Remote Controls
/
Field Game
(Picture)
Emphasize vivid greenof the glass. High contrast, deep black for
the bright scene.
(Sound)
Emphasize surrounded cheers and sound of hitting the ball.
WINTER SPORT
(Picture)
Reduce white saturation of snow. Emphasize primary colors of the
skiing suit by slightly reducing contrast and brightness and slightly
increase the color gain.
(Sound)
Emphasize mid and high range of sound (sliding sound of skiing
and skating)
MARINE SPORT
(Picture)
Emphaszie blue sky and blue ocean with high contraast with deep
black.
(Sound)
Emphasize the sound of waves.
INDOOR SPORT
(Picture)
Emphasize red and skin color and clarify the figures in the dark
stadium.
(Sound)
Emphasize surrounded cherrs and sound of bumping bodies.
Clear voice of an announcer.
TEXT / TV
Press TXT/TV button to select teletext. Press again
w
ill display:
79ꢀPRGHꢀꢃꢀ79ꢀĺꢀ7(;7ꢀPRGHꢀĺꢀ0,;ꢀPRGHꢀĺꢀ79
$9ꢀPRGHꢀꢃꢀ$9ꢀĺꢀ7(;7ꢀPRGHꢀĺꢀ0,;ꢀPRGHꢀĺꢀ$9
Ŷ
Ŷ
Note:
Ŷ
TEXT mode: TEXT screen is displayed.
Ŷ
MIX mode: TV /AV (broadcast image) screen and the contents of TE XT(it superim posed) are displayed
simultaneously.
Ŷ
CANCEL mode: TEXT/MIX MODE is canceled temporarily and broadcast image is displayed. Ho
available key are the same as TEXT mode.
wever, the
Ŷ
Ŷ
Ŷ
Ŷ
In the following state, the TXT/TV button is invalid.
RF non-signal (Auto shut off)
AV non-signal (Blue back)
The TXT/TV button is pressed during the CANCEL mode. The CANCEL mode will be canceled, and it
will
19
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATION
TEXT CANCEL
Ŷ
When press the TEXT CANCEL button in TEXT or MIX mode, the TV picture appears on the screen. CANCEL
mode will be canceled if the button pressed once again.
CANCEL mode is also canceled by the TXT/TV button.
In CANCEL mode, “CAN “ is always displayed on the screen upper left.
Ŷ
Ŷ
TEXT INDEX
Press the INDEX button to select the teletext index page in TEXT, MIX , CANCEL mode.
TEXT SUBCODE
1. Press TEXT SUB CODE button, "110/. . . ."will be displayed (e.g. the current page is 10).
2. Press the NUMER IC buttons(0-9) to enter the sub page. For example, to select sub page 4, press NUMERIC
buttons 0-0-0-4, and “110/0004” will be displayed.
TEXT SIZE
Press TEXT SIZE button to enlarge the top half of the text page.
Press TEXT SIZE button again to enlarge the bottom half of the text page. Press TEXT SIZE button again to
return to the norm al size page.
1RUPDOꢀĺꢀWRSꢀKDOIꢀHQODUJHPHQWꢀĺꢀERWWRPꢀKDOIꢀHQODUJHPHQWꢀĺꢀQRUPDO
Note:
Ŷ
Ŷ
Ŷ
During the top half enlargement or the bottom half enlargement mode, if a page request is performed by [0] - [9]
button and the TEXT INDEX button, it will become the normal mode and a page will be requested.
If HOLD ON / OFF is performed during the top half enlargement m ode, it will still at the top half enlargement
mode. (AHOLD symbol display )
If HOLD ON / OFF is performed during the bottom half enlargement mode, it will still at the bottom half
enlargement m ode. (AHOLD symbol not display )
TEXT HOLD
Press TEXT HOLD button to stop page request and updating.
Ŷ
Ŷ
HOLD ON: The symbo
will appear instead of the page number.
Update of TELETEXT is forbidden. It stops on the TEXT screen display now. HOLD OFF: A status display will be
page number display.
Ŷ
TELETEXT page data is updated.
Ŷ
Ŷ
Ŷ
A screen is updated by reception of the UPDATE signal.
A screen is eliminated by reception of an ERASE signal.
TEXT HOLD button does not work except a text function.
TEXT RED
The page of a red prompt is required. (also cancel mode)
TEXT GREEN
The page of a green prompt is required. (also cancel mode)
This button does’s work except for TEXT mode .
TEXT YELLOW
The page of a yellow prompt is required. (also cancel mode)
This button does’s work except for TEXT mode .
TEXT BLUE
The page of a blue prom pt is required. (also cancel mode)
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU OPERATION (TV/AV mode)
TUNING THE TV FOR THE FIRST TIME
Before switching on the TV, put your decoder and media recorder
Initial Installation
to Standby if they are connected and ensure the antenna is
connected. Tosetup the TV use the buttons on the remote control
as detailed on page.
Menu Language
English
Country/Region
Province/State
Australia
NSW/ACT
This screen will appear the first time that the TV is switched on and
ezch time the TV is reset.
1
3UHVVꢀŻŹEXWWRQVꢀWRꢀVHOHFWꢀWKHꢀ³0HQXꢀODQJXDJH´ꢀIXQFWLRQꢂꢀ
Language include the “English”, “Françals” and “
2
OK
BACK
Star TV Scan
Cancel
˛̜
".
8VHꢀźEXWWRQꢀWRꢀVHOHFWꢀ³3URYLQFHꢁ6WDWH´ꢂꢀ3UHVVꢀŻŹEXWWRQVꢀ
to select the state in which you live. State include the NSW/
ACT(New South Wales/Australian Capital Territory). VIC(Victoria),
OLD(Queensland), SA(South Australia), WA(Westem Australia),
TAS(Tasmania) and NT(Northern Territory).
3
Press
to setup “Energy Saving Mode”.
4
5
3UHVVꢀŻŹEXWWRQVꢀWRꢀVHOHFWꢀWKHꢀ³(QHUJ\ꢀ6DYLQJꢀ0RGH´ꢂ
Notes:
•
To ensure your television is operating at optimal energy
efficiency, select ECO mode during initial activation. ECO mode is
recommended for normal home use.
•
Energy Saving Mode: The factory default settings of this television
meet ENERGY SAVING requirements. Changing Picture Settings
may increase energy consumption, possibly beyond the limits
required for ENERGY SAVING qualification.
TV Auto Scan
ATV Channels:0
•
To return to ECO mode settings, select Standard picture mode.
•
Standard picture mode is used to achieve published average
power values, and this mode is recommended for normal home
use.
VL
10%
Press
to set “Energy Saving Mode” and to start ATV/DTV Scan.
6
The Auto Scan screen will appear and the TV will automatically
start to search for available stations. The progress bar will
move along the line.
When DTV search is completed, the TV will automatically turn to
the lowest logical channel number.
7
21
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU OPERATION (TV/AV mode)
PICTURE
Press MENU buttoQꢀDQGꢀWKHꢀPDLQꢀPHQXꢀZLOOꢀDSSHDUꢂꢀ3UHVVꢀŻŹꢀ
SCREEN MENU
1
buttons to select "PICTURE".
DTV Menu...〔PICTURE〕
3UHVVꢀŸźꢀEXWWRQVꢀWRꢀVHOHFWꢀWKHꢀLWHPꢀGHVLUHGꢂ
3UHVVꢀŻŹꢀEXWWRQVꢀWRꢀDGMXVWꢀYDOXHꢂ
Picture Mode
Color Temp
Aspect Ratio
Backlight
DNR
Auto Conrrast Enhancement
On
2
3
Picture Mode
Dynamic
Contrast
Brightness
Color
Sharpness
Tint
50
50
50
0
Ŷ
Press BACK button to return to the previous menu.
0
PICTURE MODE
OK
MENU
BACK
Cancel
Confirm
Return
Navigate
• Select "Dynamic", "Standare", "Movie" pressing ŻŹꢀEXWWRQVꢂ
Mode
Picture quality
Dynamic
Standard
Movie
Bright and dynamic picture
Standard picture
DTV Menu...〔PICTURE... Picture Mode〕
Picture Mode
Color Temp
Aspect Ratio
Backlight
DNR
Auto Conrrast Enhancement
On
Picture Mode
Dynamic
Contrast
Brightness
Color
Sharpness
Tint
50
50
50
0
Mild soft picture
Memory
Memory the picture quality you set
0
Note:
OK
MENU
BACK
Cancel
Confirm
Return
Navigate
• In the PC input mode this mode is not available.
Adjusting the Basic picture quality
3UHVVꢀ0(18ꢀEXWWRQꢄꢀWKHQꢀSUHVVꢀŻŹEXWWRQVꢀWRꢀGLVSOD\ꢀWKHꢀ
“PICTURE”.
1
Press
ꢀEXWWRQꢄꢀWKHQꢀSUHVVŸźEXWWRQVꢀWRꢀVHOHFWꢀ³3LFWXUHꢀ0RGH´ꢂ
2
3
4
3UHVVꢀŻŹꢀEXWWRQVꢀWRꢀVHOHFWꢀ³0HPRU\´ꢂ
3UHVVꢀꢀŸźEXWWRQVꢀWRꢀVHOHFWꢀDQꢀLWHPꢀ\RXꢀZDQWꢀWRꢀDGMXVWꢄꢀWKHQꢀSUHVVꢀ
ŸźꢀEXWWRQVꢀWRꢀDGMXVWꢀWKHꢀVHWWLQJꢀDVꢀUHTXLUHGꢂ
Żꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ
Pressing
Ź
Selection
Contrast
Brightness
Color
lower
higher
darker
paler
lighter
deeper
sharper
greenish
Sharpness
Tint
softer
reddish
Note:
• The Tint may only be adjust on a tape which has been recorded
and played back on an NTSC VCR.
• In the PC input mode ( page xx ) Sharpness mode is not available.
Color Temperature
You can change the tone of the picture by selecting from three
preset color temperatures: “Cool”, “Normal” or “Warm”.
)URPꢀWKHꢀ³3LFWXUH´ꢀꢄꢀSUHVVꢀŸźEXWWRQVꢀWRꢀVHOHFWꢀ³&RORUꢀ7HPS´ꢀWKHQꢀ
1
press
.
3UHVVꢀŻŹEXWWRQVꢀWRꢀVHOHFWꢀPRGHꢀ\RXꢀSUHIHUꢂ
2
Cool:
Lends a blue hue to the picture.
Normal: Neutral
Warm: Lends a red hue to the picture.
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU OPERATION (TV/AV mode)
Aspect Ratio
Select screen size among “Wide”,”Super Live 2”,”Cinema2”,”4:3”
,”Super Live1”, “Cinema 1”, “Subtitle”, “14:9” and “Auto” on Menu.
(See Page 18)
)URPꢀWKHꢀ³3,&785(´ꢄꢀSUHVVꢀŸźꢀEXWWRQVꢀWRꢀVHOHFWꢀ³$VSHFWꢀ5DWLR´ꢀ
1
then press
.
3UHVVꢀŻŹꢀꢀEXWWRQVꢀWRꢀVHOHFWꢀVFUHHQꢀVL]Hꢂ
2
Backlight
In order to improve screen visibility, the active backlight control
sets the screen brightness automatically during dark scenes.
)URPꢀWKHꢀ³3,&785(´ꢄꢀSUHVVꢀŸźꢀEXWWRQVꢀWRꢀVHOHFWꢀ³%DFNOLJKW´ꢀWKHQꢀ
1
press
.
3UHVVꢀŻŹꢀꢀEXWWRQVꢀWRꢀVHOHFWꢀ³2II´ꢀRUꢀ³2Q´ꢂ
2
3
If you want to adjust Backlight manually, turn Active Backlight
&RQWUROꢀWRꢀ2IIꢄꢀWKHQꢀSUHVVꢀźꢂ
3UHVVŻŹꢀEXWWRQVꢀWRꢀDGMXVWꢀWKHꢀVHWWLQJVꢀDVꢀUHTXLUHGꢂ
4
DNR
If the receiving signal is weak and the picture is blurry, the picture
may be improved whe using this function.
)URPꢀWKHꢀ³3,&785(´ꢀꢄꢀSUHVVꢀŸźꢀEXWWRQVꢀWRꢀVHOHFWꢀ³'15´ꢀWKHQꢀ
1
press
.
3UHVVꢀŸźEXWWRQVꢀWRꢀVHOHFWꢀDQꢀLWHPꢀ\RXꢀZDQWꢀWRꢀDGMXVWꢄꢀSUHVVꢀŻŹꢀ
buttons to adjust the settings as requires.
2
Note:
• In the PC input mode this mode is not available.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU OPERATION (TV/AV mode)
Cinema Mode ( VIDEO 1/VIDEO 2 only)
Menu...〔PICTURE... Picture Mode〕
A movie film’s picture runs at 24 frames a second, whereas movie
software suvh as DVD, etc., that you enjoy watching on television at
home runs at 30 (NTSC) or 25 (PAL) frames a second. To convert this
signal to reproduce a smooth motion and picture quality, select the
“On” mode.
Picture Mode
Cinema Mode
Color Temp
Aspect Ratio
Backlight
Cinema Mode
Off
DNR
OK
MENU
BACK
Cancel
Confirm
Return
Navigate
Effective signal and setup confitions:
•
•
When the Video input mode is selected.
When the input signal format is 480i and 576i signals,
3UHVVꢀ0(18ꢀEXWWRQꢄꢀWKHQꢀSUHVVŻŹꢀEXWWRQVꢀWRꢀGLVSOD\ꢀWKHꢀ
1
2
3
“PICTURE” menu then press
.
3UHVVꢀŸźEXWWRQVꢀWRꢀVHOHFWꢀꢅ&LQHPDꢀ0RGHꢅꢄꢀDQGꢀZLOOꢀGLVSOD\ꢀ
³3,&785(´ꢀPHQXꢂꢀ3UHVVꢀŸźꢀEXWWRQVꢀWRꢀVHOHFWꢀWKHQꢀSUHVVꢀ
.
3UHVVꢀŻŹꢀEXWWRQVꢀWRꢀWXUQꢀ³2Q´ꢀRUꢀ³2II´ꢂ
Note:
• When a DVD movie with subtitle is playing back, this mode may
not work correctly.
• Cinema Mode only support to VIDEO 1, VIDEO 2, when AV
connection setting is in CVBS mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU OPERATION (TV/AV mode)
AUDIO
SCREEN MENU
Press MENUꢀEXWWRQꢀDQGꢀWKHꢀPDLQꢀPHQXꢀZLOOꢀDSSHDUꢂꢀ3UHVVꢀŻŹꢀ
1
buttons to select “AUDIO”, and will display AUDIO menu.
DTV Menu...〔AUDIO〕
3UHVVꢀŸźꢀEXWWRQVꢀWRꢀVHOHFWꢀWKHꢀLWHPꢀGHVLUHGꢂ
2
3
Selectable Sound
Selectable Sound
Bass Setting
Treble Setting
Balance Setting
User
Bass Boost
0
0
0
Virtal Surround
3UHVVꢀŻŹꢀEXWWRQVꢀWRꢀDGMXVWꢀYDOXHꢂ
Ŷ
Press BACK button to return to the previous menu.
OK
MENU
BACK
Cancel
Confirm
Return
Navigate
Selectable Sound ( Digital only)
3UHVVꢀ0(18ꢀEXWWRQꢄꢀWKHQꢀSUHVVꢀŻŹꢀEXWWRQVꢀWRꢀGLVSOD\ꢀꢀ³$'8,2´ꢄꢀ
1
then press
.
3UHVVꢀŸźꢀEXWWRQVꢀWRꢀVHOHFWꢀWKHꢀ6HOHFWDEOHꢀ6RXQGꢄꢀWKHQꢀSUHVVꢀ
DTV Menu...〔AUDIO...Selectable Sound〕
2DQGꢀŻŹꢀWRꢀVHOHFWꢀ³6WDQGDUG´ꢄꢀ³0RYLH´ꢄꢀ³0XVLF´ꢀDQGꢀ³8VHU´ꢂ
Selectable Sound
Bass Boost
Selectable Sound
Bass Setting
Treble Setting
Balance Setting
User
0
0
0
Virtal Surround
,Qꢀ8VHUꢀLWHPꢄꢀ\RXꢀFDQꢀSUHVVŸźꢀEXWWRQVꢀWRꢀVHOHFWꢀDQꢀLWHPꢀ\RXꢀZDQWꢀ
WRꢀDGMXVWꢄꢀSUHVVꢀŻŹꢀWRꢀDGMXVWꢀWKHꢀVHWWLQJVꢀDVꢀUHTXLUHVꢂ
3
When you select “Standard”, “Movie”, “Music”, the setting was fixed
and can’t adjust.
4
OK
MENU
BACK
Cancel
Confirm
Return
Navigate
Żꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ
Pressing
Ź
stronger
stronger
Selection
Bass
weaker
weaker
Treble
decreases the right
channel
decreases the left
channel
Blance
Bass Boost (For User mode adjust)
)URPꢀWKHꢀ³$8',2´ꢄꢀSUHVVꢀŸźꢀWRꢀVHOHFWꢀ³%DVVꢀ%RRVW´ꢀWKHQꢀSUHVVꢀ
1
2
.
3UHVVꢀŻŹꢀWRꢀVHOHFWꢀ³2II´ꢄꢀ³/RZ´ꢄꢀ³0LG´ꢀDQGꢀ³+LJK´ꢂ
Note:
•
The Bass Boost effect is active only when the sound outputs from
the speaker.
Vitual Surround (For User mode adjust)
The Virtual Surround is especially useful if you want to setting up
virtual surround for TV.
)URPꢀWKHꢀ³6RXQG´ꢄꢀSUHVVꢀŸźꢀWRꢀVHOHFWꢀ³9LUWXDOꢀ6XUURXQG´ꢀWKHQꢀSUHVVꢀ
1
.
3UHVVꢀŻŹꢀWRꢀVHOHFWꢀ³2II´ꢀRUꢀ³2Q´ꢂ
2
Note:
•
The Virtual Surround effect is active only when the sound outputs
from the speaker.
•
When the Selectable Sound setting isn't in User mode, the "Virtual
Surround" menu is not selectable.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU OPERATION (TV/AV mode)
SCREEN MENU
MTS ( analog TV only)
Auto mode
ATV Menu...〔AUDIO〕
The MTS Auto mode automatically recognize stereo/bilingual
programs depending on the broadcast signal.
MTS
Dual
Selectable Sound
Bass Boost
Virtal Surround
Auto
Press MENUꢀEXWWRQꢄꢀWKHQꢀSUHVVŻŹꢀEXWWRQVꢀWRꢀGLVSOD\ꢀWKHꢀ
1
“SOUND” menu then press
.
! !
OK
MENU
BACK
Confirm
Return
Navigate
Cancel
3UHVVꢀŸźEXWWRQVꢀWRꢀVHOHFWꢀꢅ076ꢅꢀWKHQꢀSUHVVꢀ ꢀDQGꢀŻŹꢀEXWWRQVꢀ
2
3
to “Auto” or “Mono”.
3UHVVꢀŻŹꢀEXWWRQVꢀWRꢀWXUQꢀ³2Q´ꢀRUꢀ³2II´ꢂ
Mono mode
ATV Menu...〔AUDIO...MTS〕
MTS
If you experience noise or poor reception of any stereo/bilingual
program, set the Sound mode to Mono.
Noise will be reduced and reception may improve.
Dual
Selectable Sound
Bass Boost
Virtal Surround
Auto
Note:
• If you experience noise with a particular program on whose
OK
MENU
BACK
Cancel
Confirm
Return
Navigate
channel reception is usually good, try setting MTS mode to Auto,
A/B
then switch
to Mono (monaural).
Dual 1 or Dual 2 mode ( analog TV only)
AV Menu...〔AUDIO...Dual〕
MTS
You can hear only Dual 1 or Dual 2 sound selected, whenever
bilingual programs are received.
Dual
Selectable Sound
Bass Boost
Virtal Surround
Dual 1
3UHVVꢀ0(18ꢀEXWWRQꢄꢀWKHQꢀSUHVVŻŹꢀEXWWRQVꢀWRꢀGLVSOD\ꢀWKHꢀ
1
“SOUND” menu then press
.
OK
MENU
BACK
Cancel
Confirm
Return
Navigate
3UHVVꢀŸźEXWWRQVꢀWRꢀVHOHFWꢀꢅ'XDOꢅꢀWKHQꢀSUHVVꢀ ꢀDQGꢀŻŹꢀEXWWRQVꢀ
2
3
to “Dual 1” or “Dual 2”.
3UHVVꢀŻŹꢀEXWWRQVꢀWRꢀWXUQꢀ³2Q´ꢀRUꢀ³2II´ꢂ
Mono mode
If you experience noise or poor reception of any stereo/bilingual
program, set the Sound mode to Mono.
Noise will be reduced and reception may improve.
Note:
• When the MTS setting is in Mono mode, the "Dual" is not
selectable.
• The "Dual" setting status remains even if the TV is turned off.
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU OPERATION (TV/AV mode)
SETUP
SCREEN MENU
Press MENUꢀEXWWRQꢀDQGꢀWKHꢀPDLQꢀPHQXꢀZLOOꢀDSSHDUꢂꢀ3UHVVꢀŻŹꢀ
1
buttons to select “SETUP”, and will display “SETUP” menu.
DTV Menu...〔SETUP〕
3UHVVꢀŸźꢀEXWWRQVꢀWRꢀVHOHFWꢀWKHꢀLWHPꢀGHVLUHGꢂ
3UHVVꢀŻŹꢀEXWWRQVꢀWRꢀDGMXVWꢀYDOXHꢂ
Language
English
Menu Language
2
3
Country/Region
Full Search
Quick Search
Manual Search
Channel List
Groupe Fav: 1
Ŷ
Press BACK button to return to the previous menu.
Language
OK
MENU
BACK
Cancel
Confirm
Return
Navigate
Coutry/Region
Full Search ( Digital TV only)
DTV Menu...〔SETUP〕
As new services are broadcast, it will be necessary to re-tune the TV in
order to view them.
Quick Search
Manual Search
Channel List
Full Seach will completely re-tune the TV and can be used to updated
the channel list. It is recommended that Full Seach is run periodically
to ensure that all new services are added. All stored programs and
settings, including Timer entries, favorites and locked programs, will be
lost.
Groupe Fav: 1
Groupe Fav: 2
Groupe Fav: 3
Erase Channels
OK
MENU
BACK
Cancel
Confirm
Return
Navigate
Press MENUꢀEXWWRQꢄꢀDQGŻŹꢀEXWWRQVꢀWRꢀGLVSOD\ꢀWKHꢀ³6(783´ꢀ
1
menu
.
!
Press
ꢄꢀDQGŸźEXWWRQVꢀWRꢀVHOHFWꢀꢅ)XOOꢀ6HDUFK´ꢂ
2
3
Press
, a confirmation screen willappear indicating that This
will do full search, Are your sure?
Press , to start “Auto tuning”.
4
The below sample display shows “Full Search” in progress.
The channel number will show 1~69.
DTV Channels will display searched channel and name
information.
Radio Channels will display searched channel and name
information.
“Full Search” will show scan of “DTV Channels/Radio Channels” list.
5
6
When the search is complete, the TV will auto matically tune to the
lowest logical channel number.
Note:
• After the Full Search, the TV may have scanned identical
channels being broadcast from different transmitters. Pressing
to helps you to check Full Search result. If you do find
channels with the same logical channel numbers but different
physical channel numbers, it is recommended that you skip these
duplicate channels and keep only one channel with the best
signal strength as indicated by the signal strength bar in the on-
screen information.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU OPERATION (TV/AV mode)
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU OPERATION (TV/AV mode)
29
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU OPERATION (TV/AV mode)
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU OPERATION (TV/AV mode)
SCREEN MENU
Manual Search ( Digital TV only)
If there were any missing channel after “Full Search”, these channels
might be found by using “Manual Search” described in this section.
)URPꢀWKHꢀ³6(783´ꢄꢀSUHVVꢀŸźEXWWRQVꢀWRꢀVHOHFWꢀ³0DQXDOꢀ6HDUFK´ꢂ
1
Press
to search.
ꢄꢀWKHQŻŹEXWWRQVꢀWRꢀVHOHFWꢀWKHQꢀFKDQQHOꢀꢆꢇaꢈꢉꢊꢀ\RXꢀZLVKꢀ
2
3
4
If scanning was successful, “Signal Strength” will appear at almost
100%. Repeat to scan other channels as necessary.
If scanning was unsuccessful, “Signal Strength” will appear at
almost 0%.
At this point you can rescan the signal or refer to aligning the
direction of the antenna to get the signal. Refer to your antenna
installer if problem persists.
Note:
• Signal Strength refers to the input Radio Frequency (RF) signal
strength as perceived by the RV. Note that too strong signal may
cause erroneous readings. If you use an antenna booster and
find that you still get a low signal level, your booster gain may be
set too high. In this case, adjust the gain accordingly. You may
also see the No Signal on the screen when the signal level is low.
Channel List ( Digital TVonly)
)URPꢀWKHꢀ³6(783´ꢄꢀSUHVVꢀŸźEXWWRQVꢀWRꢀVHOHFWꢀ³&KDQQHOꢀ/LVW´ꢂ
1
DTV Menu...〔SETUP...Channel List〕
Language
Press
to display the “Channel List”.
2
Country/Region
Full Search
3UHVVꢀŸźEXWWRQꢀWRꢀVHOHFWꢀWKHꢀSURJUDPꢀSRVLWLRQꢀ\RXꢀZDQWꢀWRꢀ
arrange.
3
Quick Search
Manual Search
Channel List
Groupe Fav: 1
3UHVVꢀŹꢀEXWWRQꢀWRꢀGLVSOD\ꢀWKHꢀEUHDNGRZQꢀPHQXꢂ
4
5
OK
MENU
BACK
Cancel
Confirm
Return
Navigate
3UHVVꢀŸźEXWWRQꢀWRꢀVHOHFWꢀDQꢀLWHPꢄꢀWKHQꢀSUHVVꢀ
as shown below:
to select the item
•
•
•
•
•
•
•
•
•
•
Add to Fav:1 - Add selected channel to Favorite group 1.
Add to Fav:2 - Add selected channel to Favorite group 2.
Add to Fav:3 - Add selected channel to Favorite group 3.
Sort: LCN - Sort all channels by channel number.
Sort: Name Down - Sort all channels by name.
Sort: Name Up - Sort all channels by name.
Delete - Delete selected channel from the channel list.
Lock/Unlock - Lock / Unlock selected channel by password.
Move Up - Selected channel will be move up one channel.
Move Down - Selected channel will be move down one channel.
Sorting program position
•
The TV is capable of receiving a number of different channels
depending upon where you live.
•
Program sorting is an easy way of storing each channel on the
program position of your choice.
Ex: To swap channel A1. TEN Digital 1 (Prog.13) for channel TEN
Digital 2 (Prog.14).
31
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU OPERATION (TV/AV mode)
SCREEN MENU
Favorite Channel
Press MENUꢀEXWWRQꢀDQGꢀŻŹEXWWRQꢀWRꢀVHOHFWꢀWKHꢀ³6(783´ꢂ
1
DTV Menu... 〔SETUP...Groupe Fav: 1〕
Language
Press
ꢀDQGꢀSUHVVꢀŸźEXWWRQꢀWRꢀVHOHFWꢀ³*URXSHꢀ)DYꢂꢀꢋꢄꢀꢌꢀRUꢀꢍ´ꢀ
2
Country/Region
Full Search
then press
.
Quick Search
Manual Search
Channel List
Groupe Fav: 1
3UHVVꢀŹꢀEXWWRQꢀZLOOꢀGLVSOD\ꢀWKHꢀEUHDNGRZQꢀPHQXꢂ
3UHVVꢀŸźEXWWRQꢀWRꢀVHOHFWꢀDQꢀLWHPꢂꢀ
3
4
OK
MENU
BACK
Cancel
Confirm
Return
Navigate
•
•
•
•
Add - Add selected channel from the channel list.
Delete - Delete selected channel from the channel list.
Move Up - Selected channel will move up one channel.
Move Down - Selected channel will move down one channel.
You can press
BACK button to exit.
to save edited channel program and press
5
6
7
When viewing in Digital TV, press
Fav.” channel list.
button to display the “Groupe
3UHVVꢀŸźEXWWRQꢀWRꢀVHOHFWꢀ\RXUꢀIDYRULWHꢀSURJUDPꢄꢀWKHQꢀSUHVVꢀꢀ
Auto Tuning ( Analog TV only)
ATV Menu...〔SETUP...Auto Tuning〕
First, use the “Auto Tuning” function to preset all the active channels
in your area automatically. Then, arrange the preset channels with the
“Manual Adjust” function so that you can tune into desired channels.
Language
Country/Region
Auto Tuning
Manual Adjust
Channel List
Groupe Fav: 1
Groupe Fav: 2
Press MENUꢀEXWWRQꢀDQGꢀŻŹEXWWRQꢀWRꢀVHOHFWꢀWKHꢀ³6(783´ꢂ
1
2
3
OK
MENU
BACK
Cancel
Confirm
Return
Navigate
Press
ꢀDQGꢀSUHVVꢀŸźEXWWRQꢀWRꢀVHOHFWꢀ³$XWRꢀ7XQLQJ´ꢂ
Press
a confirmation screen will appear indicating that This will
do auto tuning, Are you sure?
Press
all available stations.
to start the automatic search. The search will begin for
4
This slide bar will move along line as the search progresses.
If you make a mistake, simply repeat steps 1-3 to start again
from the beginning.
When the automatic search is completed, the TV will automatically
return to the first program position.
5
6
Press CH + or CH - to start the automatic search. The search will
begin for all available stations.
Note:
• When you preset the program channel which sound of broadcast
transmission system adopts "M" system, the sound system may
not be tuned correctly if the radio waves transmit badly. At that
time, preset the channel by "Manual Search".
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU OPERATION (TV/AV mode)
SCREEN MENU
Manual Adjust (Analog TV only)
Use the “Manual Adjust” operation if desired channels cannot be
ATV Menu...〔SETUP...Manual Adjust〕
preset with the Auto tuning or if you would like to preset channels to
specific position numbers one by one.
Language
Channel
Country/Region
Fine Tune Mode
Auto Tuning
Manual Fine Tune
PAL
Fine Tune
O
KHz
Manual Adjust
)URPꢀWKHꢀ³6(783´ꢄꢀSUHVVꢀŸźEXWWRQꢀWRꢀVHOHFWꢀ³0DQXDOꢀ$GMXVW´ꢂ
1
2
Color System
Channel List
Groupe Fav: 1
Groupe Fav: 2
Sound System
Label
Press
ꢀDQGꢀWRꢀGLVSOD\ꢀWKHꢀ³0DQXDOꢀ$GMXVW´ꢄꢀWKHQꢀSUHVVꢀŸźEXWWRQꢀ
OK to Add This Channel
BACK
Cancel
to select the item as shown below.
OK
MENU
Confirm
Return
Navigate
•
•
•
•
Channel - You can select channel no for which "Manual Adjust" is
required.
Fine Tune Mode - Press ŻŹEXWWRQꢀWRꢀVHOHFWꢀ³$XWRꢀILQHꢀ7XQH´ꢀ
and “Manual fine Tune”.
Sound System - Press ŻŹEXWWRQꢀWRꢀselect "Auto", "B/G", "I" or
"D/K" system.
Label- The video label allows you to label each input source for
your TV.
To change or create video label:
ꢋꢊꢀ3UHVVꢀŸźEXWWRQꢀWRꢀVHOHFWꢀ³/DEHO´ꢄꢀDQGꢀSUHVVꢀ\HOORZꢀNH\ꢀWRꢀXVHꢀ
the “EDIT” window as shown below.
ꢌꢊꢀ3UHVVꢀŸźRUŻŹꢀEXWWRQꢀWRꢀVHOHFWꢀFKDUDFWHUꢂ
And you can use Delete and Caps Lock to edit your label name.
3) Press Save to store your settings.
Channel List (Analog TV only)
ATV Menu...〔SETUP...Channel List〕
TV Channel List
Skip 1
)URPꢀWKHꢀ³6(783´ꢄꢀSUHVVꢀŸźEXWWRQꢀWRꢀVHOHFWꢀ³&KDQQHOꢀ/LVW´ꢂ
1
2
1. TEN Digital
10.TEN Digital
11. TEN Digital
12. TEN HD
Lock/Unlock
Delete
Press
and to display the “Channle List”.
Sort : Name Up
Sort : Name Down
Move Up
13. TEN Digital 1
14. TEN Digital 2
3UHVVŸźEXWWRQꢀWRꢀVHOHFWꢀWKHꢀSURJUDPꢀSRVLWLRQꢀ\RXꢀZDQWꢀWRꢀ
3
Move down
arrange.
OK
MENU
BACK
Cancel
Confirm
Return
DTV/Radio
3UHVVꢀŹEXWWRQꢀWRꢀGLVSOD\ꢀWKHꢀUHDNGRZQꢀPHQXꢂ
4
5
3UHVVŸźEXWWRQꢀWRꢀVHOHFWꢀDQꢀLWHPꢄꢀWKHQꢀSUHVVꢀꢀ
as shown below.
to select the item
•
Skip - If you turn this option on, selected channel will be skipped
when you select channels with CH+ or CH- button.
•
•
•
•
•
•
Lock/Unlock - Lock / Unlock selected channel by password.
Delete - Delete selected channel from the channel list.
Sort: Name Up - Delete selected channel from the channel list.
Sort: Name Up - Sort all channels by name.
Move Up - Selected channel will be move up one channel.
Move Down - Selected channel will be move down one channel.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU OPERATION (TV/AV mode)
Displaying the on-screen information
Digital TV
When viewing in Digital TV, the on-screen information will give the details of the channel program
currently being viewed.
The contains the following information:
•
•
•
•
•
•
•
•
•
Current Channel Number and Name
Received program video format.
Current time
Subtitle (closed-caption) availability (indicated by CC)
Dolby® Digital ausio track availability (indicated by Dolby D)
Now and Next Program Names
Parental Guidance code (PG, MA, G, R, etc.)
Audio setting
Signal Strength.
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU OPERATION (PC/HDMI mode)
PICTURE
Press MENU buttoQꢀDQGꢀWKHꢀPDLQꢀPHQXꢀZLOOꢀDSSHDUꢂꢀ3UHVVꢀŻŹꢀ
SCREEN MENU
1
buttons to select "PICTURE".
3UHVVꢀŸźꢀEXWWRQVꢀWRꢀVHOHFWꢀWKHꢀLWHPꢀGHVLUHGꢂ
3UHVVꢀŻŹꢀEXWWRQVꢀWRꢀDGMXVWꢀYDOXHꢂ
2
3
Ŷ
Press BACK button to return to the previous menu.
PICTURE MODE
• Select "Contrast", "Brightness", "Color" pressing ŻŹꢀEXWWRQVꢂ
Żꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ
Pressing
Ź
Selection
Contrast
Brightness
Color
lower
higher
darker
paler
lighter
deeper
VGA Set ( PC only)
Adjustment to the position of the picture may be made to suit your
viewing preferences.
Menu...〔PICTURE... VGA Set〕
Picture Mode
Color Temp
Aspect Ratio
Backlight
H Pos
50
10
10
15
V Pos
Clock
Press MENU buttoQꢀDQGꢀWKHꢀPDLQꢀPHQXꢀZLOOꢀDSSHDUꢂꢀ3UHVVꢀŻŹꢀ
Phase
1
Auto Adjust
VGA Set
buttons to select "PICTURE", then press
.
3UHVVꢀŸźꢀEXWWRQVꢀWRꢀVHOHFWꢀWKHꢅꢀ9*$ꢀ6HWꢅꢄꢀWKHQꢀSUHVVꢀ
.
2
3
4
OK
MENU
BACK
Cancel
Confirm
Return
Navigate
3UHVVꢀŸźꢀEXWWRQVꢀWRꢀVHOHFWꢀꢅ+ꢀSRVꢅꢄꢀꢅ9ꢀSRVꢅꢄꢀꢅ&ORFNꢅꢀDQGꢀꢅ3KDVHꢅꢂ
Press ŻŹꢀEXWWRQVꢀWRꢀDGMXVWꢀWRꢀVHWWLQJVꢀDVꢀUHTXLUHGꢂ
Automatically Adjusting the picture position (PC only)
Adjustment to the position of the picture may be made to suit your
viewing preferences.
)URPꢀWKHꢀꢅ9*$ꢀ6HWꢅꢄꢀSUHVVꢀŸźꢀEXWWRQVꢀWRꢀVHOHFWꢀꢅ$XWRꢀ$GMXVWꢅ
1
2
Press Ź button, then TV starts adjusting the picture position.
Note:
•
For the details, please refer to "PICTURE" on page xx.
AUDIO
SCREEN MENU
Press MENUꢀEXWWRQꢀDQGꢀWKHꢀPDLQꢀPHQXꢀZLOOꢀDSSHDUꢂꢀ3UHVVꢀŻŹꢀ
1
buttons to select “AUDIO”, and will display AUDIO menu.
3UHVVꢀŸźꢀEXWWRQVꢀWRꢀVHOHFWꢀWKHꢀLWHPꢀGHVLUHGꢂ
3UHVVꢀŻŹꢀEXWWRQVꢀWRꢀDGMXVWꢀYDOXHꢂ
2
3
Ŷ
Press BACK button to return to the previous menu.
Note:
•
For the details, please refer to "PICTURE" on page xx.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU OPERATION (PC/HDMI mode)
SETUP
SCREEN MENU
Press MENUꢀEXWWRQꢀDQGꢀWKHꢀPDLQꢀPHQXꢀZLOOꢀDSSHDUꢂꢀ3UHVVꢀŻŹꢀ
1
buttons to select “SETUP”, and will display “SETUP” menu.
3UHVVꢀŸźꢀEXWWRQVꢀWRꢀVHOHFWꢀWKHꢀLWHPꢀGHVLUHGꢂ
3UHVVꢀŻŹꢀEXWWRQVꢀWRꢀDGMXVWꢀYDOXHꢂ
2
3
Ŷ
Press BACK button to return to the previous menu.
Note:
•
For the details, please refer to "AUDIO" on page xx.
TIMER
SCREEN MENU
Press MENUꢀEXWWRQꢀDQGꢀWKHꢀPDLQꢀPHQXꢀZLOOꢀDSSHDUꢂꢀ3UHVVꢀŻŹꢀ
1
2
buttons to select “TIMER”, and will display “TIMER” menu.
3UHVVꢀŸźꢀEXWWRQVꢀWRꢀVHOHFWꢀWKHꢀLWHPꢀGHVLUHGꢂ
3UHVVꢀŻŹꢀEXWWRQVꢀWRꢀDGMXVWꢀYDOXHꢂ
3
•
Press BACK button to return to the previous menu.
Note:
•
For the details, please refer to "TIMER" on page xx.
FUNCTION
Press MENUꢀEXWWRQꢀDQGꢀWKHꢀPDLQꢀPHQXꢀZLOOꢀDSSHDUꢂꢀ3UHVVꢀŻŹꢀ
SCREEN MENU
1
2
buttons to select “FUNCTION”, and will display “FUNCTION” menu.
3UHVVꢀŸźꢀEXWWRQVꢀWRꢀVHOHFWꢀWKHꢀLWHPꢀGHVLUHGꢂ
3UHVVꢀŻŹꢀEXWWRQVꢀWRꢀDGMXVWꢀYDOXHꢂ
3
•
Press BACK button to return to the previous menu.
Note:
•
For the details, please refer to "FUNCTION" on page xx.
Download from Www.Somanuals.com. All Manuals Search And Download.
APPENDIX
CLEANING LCD TV
Be sure to disconnect the AC Power cord from AC outlet before cleaning the LCD TV.
Clean your LCD TV as follows:
•
•
Gently wipe the screen and cabinet with dry soft cloth.
The screen is likely to be dam aged if it is not maintained properly. Do not use hard objects like a hard cloth or
paper. Do not use solvents or abrasions.
CAUTION :
Do not use benzene, thinner, or any volatile substances to clean the LCD TV. These chemicals may damage the
cabinet finish.
FUNCTION OF PRODUCT SAFETY FEATURE
For protecting product safety, protection feature provided inside LCD TV. Refer to the following please.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
APPENDIX
TROUBLESHEETING
Before calling your dealer or service center for assistance, check the matters below once again.
1. Make sure you have connected LCD TV to your equipment as described in the section “CONNECTING LCD
TV”.
2. Check cable connection. Verify that all external equipment and power cords are properly connected.
3. Verify that all power is switched on.
4. If LCD TV still does not produce an image, re-start the external equipment.
5. If the image still does not appear, unplug LCD TV from the external equipment and check the external
equipment. The problem may be with your graphics controller rather than with LCD TV. (When you reconnect
LCD TV, remember to turn the external equipment and TV off before you power up LCD TV. Power the
equipment back on in order of : LCD TV and external equipment.)
6. If the problem still exists, check the following chart.
Problem
Try these Solutions
Plug this LCD TV into the AC outlet.
•
•
•
NO POWER
Press ON /STAND -BY button on SIDE Control or on Remote Control to open this LCD TV.
Check POWER Indicator. If this indicator flashes, LCD TV has any trouble.
•
•
•
•
•
Check the batteries.
Make sure nothing is between the Remote Receiver and the Remote Control.
Make sure you are not too far from LCD TV when using Remote Control.
Maximum operating range is 16.4’(5m).
Remote Control
does not work
Is direct sunlight or strong artificial light shining on LCD TV ‘s Infrared Remote Receiver?
Eliminate the light by closing curtains, pointing the light in a different direction, etc.
•
•
•
Check the connection between the external equipment and LCD TV.
When turning LCD TV on, it takes a few seconds to display the image.
Check the system that you select is corresponding with the external equipment or the video
equipment.
No image
No sound
•
•
Make sure the temperature is not out of the Operating Temperature (0°C ~ 40°C).
Turn off power, then turn on again, re-start LCD TV.
•
•
•
•
Check Audio cable connection from Audio input source.
Adjust the Audio source.
Press VOLUME (+) button.
Press MUTE button.
•
Dark or bright points of light (red, green, or blue) may appear on the screen. This is a
characteristic of the LCD panels, not a malfunction of the LCD TV.
•
LCD panel is being produced with very high accuracy technology. There is 99.99% or more dot
pixel, but there is also 0.01 % or less of dot pixel lack or dot pixel that is constantly lighted. This is
not defect.
There are tiny
black points
and/or bright
point on the TV
•
•
Regarding LCD panel characteristic, it may occur picture remain (look like a mirror) when the
screen is changed if it displays same screen for a long time. Changing the picture or turn-off the
power supply may recover.
Stripe pattern (more, interference stripes) may show up on the screen depend on the reflected
picture.
•
•
Adjust the value of colour.
Ab normal
colour of image
!
Select different colour system.
WARNING :
High voltages are used to operate this LCD TV. Do not attempt to open the cabinet.
If the problem still persists after following all operating instructions, contact the sales dealer where you purchased LCD TV
or the service center. Give the model number and explain the difficulty. We will advise you how to obtain service.
Download from Www.Somanuals.com. All Manuals Search And Download.
APPENDIX
SPECIFICATIONS
Maximum Visible Range
19"
26"
32"
42"
(H)409.8×(V)230.4 mm 18.51 inches
(H)575.769×(V)323.712 mm
(H)697.685×(V)392.256 mm
26 inches
31.51 inches
(H)930.24×(V)523.26 mm 42.02 inches
Picture Resolution
19"
26"
32"
42"
WXGA 1366 x 768
WXGA 1366 x 768
WXGA 1366 x 768
Full HD 1920 x 1080
View able Angle(L/3)
19"
26"
32"
42"
Horizontal & Vertical: 176°
Horizontal & Vertical: 176°
Horizontal & Vertical: 178°
Horizontal & Vertical: 178°
Brightness
19"
26"
32"
42"
250 cd/m2
450 cd/m2
450 cd/m2
500 cd/m2
Contrast
19"
26"
32"
42"
1000
2500
3000
1400
Voltage
100-240VAC 50/60Hz ±10%
Colour System
PAL/NTSC/NTSC4.43/NTSC 3.58/SECAM D/K , I, M , B/G
Channel Coverage
Low band: 45.25 to 144.00MHz.
Mid band: 145.00 to 424.00MHz
High band: 425.00 to 866.25MHz
Speaker Size
19"
(L)74×(W)27×(H)19.5 mm
26"/32"/42" (L)200×(W)40×(H)41.5 mm
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound speciality
Maximum Output Power
19"
26"
32"
42"
3W+3W
7W+7W
10W+10W
10W+10W
Input terminals
Video 1
Video 2
Video 3
MINI STEREO
JACK
PC
HDMI/DVI HDMI RF
AV
SV AV/SV Audio AV AV Audio YPbPr YPbPr Audio
19"
26"
32"
42"
1
1
1
1
1
1
1
1
1
1
1
1
0
1
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Output terminals
AV out
HeadPhone
19"
26"
32"
42"
1
1
1
1
1
1
1
1
Dimensions
(Including Stand)
19"
26"
32"
42"
463.4(W) X 350.3(H) X 167.9(D)
667.6(W) X 210.4(H) X 493.9(D)
801.6(W) X 210.4(H) X 570.4(D)
1022.8(W) X 697.4(H) X 250.2(D)
Net Weight
(Including Stand)
19"
26"
32"
42"
3.8 Kg
7.9 Kg
11 Kg
16.8 Kg
Operating Environment
Operating Temperature: Operating:5°C to 35°C
Operating Humidity: 0 % to 90 %
Storage Temperature: 0°C to 40°C
Storage Humidity: 0% to 90% (non-condensing)
Ŷ
Ŷ
Specifications are subject to change without notice.
The On-Screen Menu and figures in this manual may differ slightly from the product.
Download from Www.Somanuals.com. All Manuals Search And Download.
APPENDIX
CONFIGURATIONS OF VGA TERMINALS
VGA IN (D-SUB) TERMINAL
Terminal : D -SUB15 PIN
Connect video output terminal of LCD TV to this terminal with VGAC able (not supplied). When connecting
Macintosh computer, the MAC Adapter (not supplied) is required.
1
2
3
4
5
6
7
8
Red Input
Green Input
9
No Connect
Ground (Vertsync.)
Sense 0
10
11
12
13
14
15
Blue Input
Sense 2
Sense 1
Ground (Horiz.sync.)
Ground (Red)
Ground (Green)
Ground (Blue)
Horiz. sync.
Vert. sync.
Reserved
(Table) Analog RGB Video Timing Chart
Signal mode
No
Horizontal Frequency(KHz) Dot clock Frequency (MHz)
Signal name Resolution Vertical Frequency(Hz)
1
2
VGA
640x400
640x480
70.086
60
31.469
31.47
37.86
37.5
25.175
25.18
31.5
31.5
40
VESA
640x480
72
640x480
75
800x600
60
37.87
48.07
46.87
48.36
56.47
60.02
47.39
47.77
60.28
63.98
79.97
47.712
800x600
72
50
800x600
75
49.5
65
1024x768
1024x768
1024x768
1280x768
1280x768
1280x768
1280x1024
1280x1024
1360x768
60
3
VESA
70
75
75
78.75
68.25
79.5
102.25
108
60
60
75
60
4
5
75
135
VESA
60.015
85.5
41
Download from Www.Somanuals.com. All Manuals Search And Download.
APPENDIX
(Table) Component Video Timing Chart
Signal mode
No
Horizontal Frequency(KHz) Dot clock Frequency (MHz)
Signal
name
Resolution
Vertical Frequency(Hz)
1
2
3
4
5
6
7
8
9
576i
480i
720(1440)x576
720(1440)x480
720x576
50
59.94
50
15.63
15.73
31.25
31.47
28.13
33.75
37.5
27
27
576P
27
480P
720x480
59.94
50
27
1080i/50
1080i/60
720P/50
720P/60
1920x1080
1920x1080
1280x720
74.25
74.25
74.25
74.25
148.5
148.5
60
50
1280x720
60
45
1080P/50 1920x1080
50
56.25
67.5
10 1080P/60 1920x1080
60
(Table) Digital HDMI 1 Video Timing Chart
Signal mode
No
Horizontal Frequency(KHz) Dot clock Frequency (MHz)
Signal
name
Resolution
Vertical Frequency(Hz)
1
2
3
4
5
6
7
8
9
VGA
576i
640x480
720(1440)x576
720(1440)x480
720x576
59.94
50
31.47
15.63
15.73
31.25
31.47
28.13
33.75
37.5
25.18
27
480i
59.94
50
27
576P
27
480P
720x480
59.94
50
27
1080i/50
1080i/60
720P/50
720P/60
1920x1080
1920x1080
1280x720
74.25
74.25
74.25
74.25
74.25
74.25
74.25
148.5
148.5
60
50
1280x720
60
45
10 1080P/24 1920x1080
11 1080P/25 1920x1080
12 1080P/30 1920x1080
13 1080P/50 1920x1080
14 1080P/60 1920x1080
24
26.973
28.125
33.75
56.25
67.5
25
30
50
60
NOTE:
•
•
Vertical Frequency : Standard ± 1Hz
HDMI 1 can support all of the Analog RGB Video Timing.
Download from Www.Somanuals.com. All Manuals Search And Download.
APPENDIX
SAFETY NOTE
For correct installing, mounting and uninstalling LCD TV Stand, it is strongly recommended to use a trained,
authorized dealer. Failure to follow correct procedures could result in damage to the equipment or injury to the
installer.
Uninstalling Stand Base (19")
Place the LCD TV screen facing down on a
flatsurface place where maintained with soft after push 6 hooks.(A)
Pull the stand base out from the cabinet
1
2
materials (such as a blanket) for protecting the
display screen.
screwdriver remove screws from stand
mounting inserts (B) before installing stand
base .(For wall mounting).
3
Uninstalling Stand Base (26"/32"/42")
Place the LCD TV screen facing down on a
Release screw in 4 holes with screw
1
2
flatsurface place where maintained with soft driver.
materials (such as a blanket) for protecting the
display screen.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
APPENDIX
Wall Mounting (optional)
Use the screws that are threaded into the stand-mounting inserts on the back of your HDTV to secure it to a wall
mounting. Kit.
NOTE: Wall Mounting kit is not supplied.
Size
19”
26”
32”
42”
VESA standard interface
100 x 100 mm
100 x 200 mm
200 x 200 mm
200 x 400 mm
Mounting screws measurements:
Size
Mounting Screws
Distance between TV and wall(A)
65 mm (min)
19”
M4 Diameter, Length - 13mm (min.);16mm (max.)
M6 Diameter, Length - 13mm (min.);16mm (max.)
26”/32”/42”
60mm (min)
Download from Www.Somanuals.com. All Manuals Search And Download.
Note
Download from Www.Somanuals.com. All Manuals Search And Download.
Note
47
Download from Www.Somanuals.com. All Manuals Search And Download.
SANYO Electronics CO., Ltd.
Download from Www.Somanuals.com. All Manuals Search And Download.
|