Sanyo Flat Panel Television CE52SR1 User Guide

Instruction Manual  
Manuel d'utilisation  
Manual de instrucciones  
CE52SR1  
LCD Monitor  
Moniteur d'affichage à cristaux liquides  
Monitor de LCD  
English  
Page  
Page  
2~15  
GB  
F Français  
Español  
16~28  
29 41  
~
Página  
E
Please read this Instruction book before using your LCD monitor. We wish you many hours of pleasure from your new LCD monitor.  
Veuillez lire attentivement ce mode d’emploi avant d’utiliser votre moniteur d’affichage à cristaux liquides. Nous espérons que votre  
nouveau dispositif d'affichage vous procurera de nombreux instants de bonheur.  
Lea este manual de instrucciones antes de usar su nuevo monitor. Deseamos que disfrute de él muchas horas.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GB  
GB  
SERVICING  
Servicing  
Your monitor is fully transistorised and does not contain any user serviceable components.  
You must not remove the rear cover of the monitor by yourself. The apparatus is working with high voltages and could damage  
objects or even endanger people. Leave all required repair and service jobs to an authorised service technician. He will exclusively  
use such spare parts that are complying with the same safety standards as applicable to the original parts. The use of original spare  
parts can prevent fire, shock and other hazards.  
Unplug the LCD monitor from the wall outlet and refer servicing to qualified service personnel under the following conditions:  
I If the power cord or plug is damaged.  
I If liquid has been spilt in to the LCD monitor.  
I If the LCD monitor has been dropped or the cabinet has been damaged.  
I If the LCD monitor exhibits a distinct change in performance.  
I If the LCD monitor does not operate normally by following the operating instructions.  
Adjust only those controls that are covered in the operating instructions as improper adjustment of other controls may result in damage. This will  
often require extensive work by a qualified technician to restore the monitor to normal operation.  
Important recycling information.  
Your SANYO product is designed and  
manufactured with high quality materials and  
components which can be recycled and reused.  
This symbol means that electrical and electronic  
equipment, at their end-of-life, should be  
disposed of separately.  
In the European Union there are separate  
collection systems for used electrical and  
electronic products.  
Please help us to conserve the environment we live in!  
Note: This symbol mark and recycle system are applied only to  
EU countries are not applied to other countries of the  
world.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
GB  
GB  
Declaration of Conformity: North America and Canada  
Model Number  
Trade name  
: CE52SR1  
: Sanyo  
Responsible party  
Address  
Telephone  
: SANYO FISHER COMPANY  
: 21605 Plummer Street, Chatsworth, California 91311  
: (818) 998-7322  
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:  
(1) this device may not cause harmful interference, and  
(2) this device must accept any interference received, including interence that may cause undesired operation.  
AC Power Cord Requirement  
The AC Power Cord supplied with this LCD monitor meets the requirement for use in the country in which you  
purchase it.  
AC Power Cord for the United States and Canada:  
GROUND  
AC Power Cord used in the United States and Canada is listed by the Underwriters Laboratories (UL) and certified by the Canadian Standard  
Association (CSA).  
AC Power Cord has a grounding-type AC line plug. This is a safety feature to make sure that the plug will fit into the power outlet. Do not try to  
defeat this safety feature. Should you be unable to insert the plug into the outlet, contact your electrician.  
THE SOCKET-OUTLET SHOULD BE INSTALLED NEAR THE EQUIPMENT AND EASILY ACCESSIBLE  
reverse-engineer, decompile or disassemble the Software;  
End-User License  
The product (meaning the equipment or appliance to which this  
make the Software (or any part of it) available, or permit its  
redistribution, for use with any computer hardware other than  
documentation relates) incorporates Software (the software  
the Product; or rent, lease, gift, loan, sell, distribute or transfer  
applications, utilities and modules embedded within the Product)  
possession of the whole or any part of the Software.  
which is owned by Sanyo or its licensors. Before using the product,  
please read the End-User License Conditions detailed below. If you  
do not agree to the terms and conditions of the End-User License,  
Termination  
Please do not proceed to use the Product- repack the Product  
unused and return it to your supplier together with proof of purchase  
for a full refund. By using the product, you agree to be bound by the  
terms and conditions of the End-User License.  
This license is effective until terminated. This license will terminate  
automatically without notice if you fail to comply with any of its  
provisions.  
Disclaimer  
License Grant, Conditions and restrictions  
1. The Software is(to the extent permitted by law) supplied ‘as is’ and  
SANYO and its suppliers expressly exclude all warranties, express  
or implied, including (but not limited to) warranties of satisfactory  
quality, fitness for purpose and non-infringement (save to the  
extent that the same are not capable of exclusion at law).  
1. Sanyo grants you a non-exclusive, world-wide (subject to export  
controls), non-transferable (except as permitted by 2 below),  
royalty-free license to use the Software upon and with the Product.  
2. You may not transfer any of your license rights in the Software  
without the prior written consent of SANYO and if consent is  
provided then the Software shall only be transferred in conjunction  
with the transfer of the Product AND provided that the transferee  
has read and agreed to accept the terms and conditions of this  
license.  
2. In no circumstances will SANYO be liable for any direct, indirect,  
consequential, or incidental damage (including loss of profits,  
business interruption, loss of data or the cost of procurement of  
substitute goods, technology or services) arising out of the use or  
the inability to use the Software (save to the extent that such  
liability is not capable of exclusion at law).  
3. You must ensure that the copyright, trademark and other protective  
notices contained in the Software are maintained and not altered  
or removed.  
General  
1. This End-User License will be governed by laws of England and  
the User may only bring claims in the English Courts and SANYO  
shall be entitled to bring a claim in the courts of any jurisdiction.  
4. The Software provided hereunder is copyrighted and licensed (not  
sold). SANYO especially does not transfer title or and ownership  
rights in the Software to you. The Software provided hereunder  
may contain or be derived from portions of materials provided to  
SANYO under license by a third party supplier.  
2.This End-User License is governed by the laws of the State of  
California. The End-User and Sanyo agree that any action to  
enforce or interpret the terms of this End-User License shall be  
brought only in the appropriate state or federal court located in Los  
Angeles County, California.The End-User and Sanyo hereby  
submit to the exclusive jurisdiction and venue of such court.  
5. Except as expressly permitted by statute you may not;  
use the Software in conjunction with any other computer  
hardware other than the product;  
3. The above terms and conditions supersede any prior agreement,  
oral or written, between you and SANYO relating to the Software.  
copy all or part of the Software;  
incorporate all (or any of) the Software into other programs  
developed by (or on behalf of) you and/or used by you;  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
GB  
GB  
INSTALLATION  
Step : 1 Mains Connection  
I Connect the display unit to VGA, BNC and Scart connector as  
required.  
R
R
L
L
AV2-IN  
LD-Net  
N5VW  
N
5V  
W
1. Connect the in-line power connector to the Mains Inlet as shown  
above.  
4. AV3  
Composite (CVBS) signal input  
AV3 OUT is to output the composite video signal from the VIDEO IN  
so that you can connect monitors with the use of a loop through  
function.  
2. Connect the power cord of the LCD monitor to a suitable wall  
outlet.  
i As this product does not have a mains On/Off switch, please  
5. DVI-D (Digital Video Interface)  
ensure your mains plug is easily accessible.  
This monitor has a DVI connector. This is located at the back of the  
monitor next to the phono sockets. This input will support a large  
range of resolutions as shown on page 14. See page 7 for details of  
menu operation.  
i The LCD monitor is prepared for a mains voltage AC100~240V,  
50Hz/ 60Hz. To completely switch off the mains, or when the  
display unit is not to be used for an extended period of time, it is  
advisable to disconnect the power cord from the power outlet.  
R
R
L
L
AV2-IN  
6. PC connection  
This LCD monitor has a PC connector (PC-IN D-SUB). You can  
connect a PC to the LCD monitor and use it as a monitor display (see  
page 9). This input will support a large range of resolutions (see page  
14). Audio can be connected via the 3.5mm PC audio in socket.  
AC Mains Outlet  
7. LD Net IN: Has the ability for LD-NET to be connected to  
control the monitor using a network.  
8. External Audio Output  
To output the audio signal from AV1, AV2, AV3, PC and DVI. The  
speaker impedance should be 8 ohms.  
iPlease use the correct mains lead supplied with the set for your  
3. aWreaarn. ing: To prevent injury, the unit must be securely attached to  
the wall in accordance with the installation instructions.  
WARNING! High voltages are used in the operation of  
this set. Refer service to qualified service personnel.  
Step : 2 Connections  
I INPUT selection  
To switch between AV1, RGB, AV2, AV3, PC, DVI or Network press  
the INPUT button on your remote control repeatedly.  
9. Use of Monitor Audio Output Connections  
The audio monitor out sockets on the rear of the set provide a fixed  
level audio output for reproducing sound via your audio equipment.  
1. AV1  
SCART connection / CVBS / RGB / S-VIDEO.  
2. RGB  
R
R
L
L
TTL input (5V RGB signals) into SCART terminal  
3. Y,Pb,Pr/ RGBHV connection (AV2)  
AV2-IN  
This LCD monitor has a choice of Y, Pb, Pr or RGB H/V connections.  
You can connect your DVD player to the Y, Pb, Pr terminals instead  
of using a scart lead. This can support high definition in analogue  
component form. RGB H/V can be used as a PC input via the BNC  
terminals.Both options support a large range of resolutions (page 15).  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
GB  
GB  
REMOTE CONTROL  
Input  
Standby  
To switch input source from AV1, RGB, AV2, AV3, PC, DVI or  
Network mode.  
To switch the monitor on and off. Also see page 7.  
Recall  
To display input selection information and the Time set.  
You can also select colour systems in AV1 / AV3 mode as  
follows: AUTO-> PAL -> SECAM -> NTSC -> NTSC4.43 ->  
PAL M ->PAL N.  
It can also be automatically adjusted in PC mode by pressing  
this button for twice .  
Wide  
To select the screen mode Full, Full All, Zoom 16:9,  
Title in 16:9, Zoom 14:9, Title in 14:9, Normal or Natural  
wide,.  
Refer to page 11.  
Back  
Used to return to the previous menu.  
Menu  
To enter and exit the main menu, and sub menu.  
Up and Down  
To select the next or previous item.  
Level Up/Down  
To adjust the sound volume level or enter sub menus  
F/OK  
Sound Mute  
To mute the sound from the speakers.  
The sound changes as follows : Normal volume <-> Mute  
To confirm the initial setting in the menu.  
Picture mode selector  
Press the -> <- button repeatedly to select the following  
.
Bass Expander  
picture mode.  
Personal-Personal preference mode.  
Standard-Normal viewing mode.  
Dynamic-Suitable for brightly lit rooms.  
Soft- Low contrast setting  
To get an emphasised bass sound ON or OFF.  
TXT/TV  
To select Teletext mode.  
Eco-Suitable for dimly lit rooms and gives a cinema-like  
effect.  
Main/Sub Picture Swap  
To swap Main and Sub picture.  
Freeze  
To switch picture still on or off.  
ON/OFF  
To switch OFF ->PIP(1) ->PIP(2) ->POP mode in turn.  
Green  
Refer to page 12.  
Press this button for more than 5 seconds, installation  
mode will appear.  
FOR EU USERS  
Remote control battery installation  
The symbol mark and recycling systems described  
below apply to EU countries and do not apply to  
countries in other areas of the world.  
Your SANYO product is designed and manufactured  
with high quality materials and components which  
can be recycled and/or reused.  
The symbol mark means that electrical and electronic equip-  
ment, batteries and accumulators, at their end-of-life, should be  
disposed of separately from your household waste.  
In the European Union there are separate collection systems  
for used electrical and electronic equipment, batteries and  
accumulators.  
Please, dispose of them correctly at your local community  
waste collection/recycling centre.  
Please, help us to conserve the environment we live in!  
Install two "AA" 1.5 volt batteries so that the "+" and "-" marks on the  
batteries match the "+" and "-" marks inside the unit into the remote  
control handset.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
GB  
GB  
INSTALLATION  
Controls and Menus  
Menu Operation  
Many of your monitors functions are controlled through the menu  
function, using the remote control.  
MENU  
Picture  
Brightness  
Contrast  
Color  
Tint (only if NTSC equipment is detected)  
Sharpness  
White Tone  
White Tone / R / G / B  
Advanced Setting  
DCDi / ACC/ACM / CCS / DNR / MPEG NR / Film Mode  
Sound  
Time  
Treble  
Bass  
Balance  
On / Off  
Bass Expander  
Current Weekday  
Current Time  
Schedule  
Weekday  
Time  
1 - 20  
Action  
Power On / Power Off  
On Program  
AV1 / RGB / AV2 / AV3 / PC / DVI  
On / Off  
Active  
Setup Menu Setup  
Language / H/V-Position / Duration / Transparence  
PIP / POP Setup  
PIP/POP Mode / Main/Sub Source / PIP Position  
Initial Settings  
Text Language  
Tile Mode  
Western / Eastern / Russian / Arabic / Farsi  
Tile Mode Active / H/V_Sets / H/V Location / Bezel H/V Adjustment  
RGBHV / YPbPr  
AV2 Setting  
Native Resolution  
PC Power save  
XGA / WXGA 1366x768  
On / Off  
1
2
PC Adj. Auto Adjust  
H-Position  
V-Position  
Clock  
1. The LCD display has a Standby light to show there is power.  
Phase  
Switching into/from standby mode  
The Standby mode is used for switching the LCD monitor off for  
short periods of time. In standby mode the monitor is switched  
off but is still receiving mains power.  
During menu operation the bottom of the on screen display will show  
which controls can be used for menu navigation.  
Press the MENU button to enter the main menu. Whenever main  
menu is accessed initially, PICTURE will be the default selection.  
To turn the monitor into standby mode, press the 4 button.  
The blue power indicator illuminates more brightly.  
A sub menu is selected using the 5 or 6 button and pressing  
the 1 or 2 button when the required sub menu is highlighted.  
When you have finished you can press the BACK button to return to  
the previous menu, press the MENU button to exit the menu  
operation.  
To turn the monitor ON from standby mode, press the 4  
button again.  
If you find the power indicator flashing, disconnect  
power cord from the power outlet and contact our  
Service desk.  
This warning is a sign to let you know that the power  
protection function of this TV set is now operating.  
2. Control buttons (bottom corner of back cover)  
Picture menu  
Menu button: Used to display or cancel main menu.  
1. Press the MENU button. PICTURE will be the default selection.  
Press the 1 or 2 button to enter.  
Set the picture settings for your “personal” preference.  
Input/  
button: Switch between AV1, RGB, AV2, AV3, PC , DVI  
d
or Network mode. It is also used to provide sub menu selection from  
the Main Menu.  
1 or 2buttons: provide up and down adjustments.  
2. Use the 5 or 6 button to select eg. Brightness and the 1  
4 button: To switch to standby mode (to switch off completely  
or 2 button to adjust levels.  
disconnect the monitor from the power supply).  
I White Tone  
May be used to adjust the color tone of the picture. Use the 5 or  
6
button to select White Tone and press the 1 or 2 but-  
ton to enter the sub menu. You can select Personal, Cool,  
Standard or Warm settings by using the 1 or 2 button. To  
adjust the color tone of the picture by using the 5 or 6 button to  
select Red(R), Green(G) or Blue(B) and the 1 or 2 button  
to adjust levels. These settings will be stored in personal mode  
automatically.  
60  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
GB  
GB  
MENU OPERATION  
I Current Weekday  
Use to set current weekday using the 1 or 2 button.  
Picture menu  
I Advanced settings  
Use the 5 or 6 button to select Advanced settings and press  
the 1 or 2 button to enter the sub menu as follows.  
I Current Time  
Use to set the current time using the Numeric buttons.  
i Other items in Time Menu should not be selected until Current  
Time has been set.  
I Schedule  
Use to set up to 20 separate time schedules, select 1 - 20 using the  
1 or 2 button.  
I Weekday  
Use to set any weekday from Sunday through to Saturday or  
Everyday using the 1 or 2 button.  
I Time  
Use to set any time using the Numeric buttons.  
DCDi(Directional Correlational Deinterlacing) is used to process  
moving angled edge in deinterlacing to get the smoothest and most  
natural image. Press the 1 or 2 button on the remote control  
to select On or Off.  
I Action  
Use to set “Power On” or “Power Off” using the 1 or 2 button.  
I On Program  
ACC/ACM(ACC: Adaptive Contrast and Color; ACM-II: Active Color  
Management-II) is used to select adaptive Brightness, Contrast and  
tone control. Press the 1 or 2 button on the remote control to  
select suitable mode either Vivid, Cinema, Sport or Off.  
Use to select AV1, RGB, AV2, AV3, PC, DVI or Network using the  
1 or 2 button.  
I Active  
Use to select ON or OFF using the 1 or 2 button. When set  
“OFF” the above items “Schedule”, “Weekday”, “Time”, “Action” or  
“ON Program” will be inactive.  
Use NUMERIC buttons [0-9] to set On Time. (Action “Power On” -  
00:00~23:59)  
CCS(Cross Color Separation) is used to remove residual chroma  
information from luminance signal which is the result of imperfect  
decoding of composite video. Press the 1 or 2 button on the  
remote control to select either Auto, Standard or Off.  
i
Once On Time has been set, when the set time is reached, the  
monitor will leave the stand-by status and enter to the source  
automatically.  
After On Time has been set, you can go on watching other  
programs. When the set time is reached, the monitor will  
automatically switch to the preset program.  
DNR(Digital Noise Reduction) is available for noise reduction. Press  
the 1 or 2 button on the remote control to select either Auto,  
Low, Mid, High or Off.  
i
MPEG NR(MPEG Noise Reduction): Removes unwanted ringing and  
block noise from images that have undergone MPEG or JPEG com-  
pression and decompression. Press the 1 or 2 button on the  
remote control to select On or Off.  
i On Program can only be selected whenAction (Power On) has  
been set.  
i Action (Power Off) can be set to turn the monitor into standby at a  
selected time  
Film Mode(Inverse 3:2 pulldown): Film vs.Video-Detect film.  
Performed on material which underwent technologic conversion to  
video. Press the 1 or 2 button on the remote control to select  
On or Off.  
Once On Program has been set, when the set time is reached, the  
monitor will enter to the preset source automatically.  
Use the 1 or 2 button to select On program, AV1, RGB,  
AV2, AV3, PC, DVI or Network.  
Sound menu  
Setup menu  
Press the MENU button and select Sound using the 5 or 6  
buttons, press the 1 or 2 button to enter.  
Press the MENU button and select Setup using the 5 or 6  
buttons, press the 1 or 2 button to enter. Press the BACK  
button to return to the previous menu. Press the MENU button to exit  
:M[WT]\QWV  
@/)  
PC Power Save  
On  
Select and adjust to obtain the best sound settings for your  
environment using the 5 or 6 button to select Treble, Bass or  
Balance and the 1 or 2 button to adjust levels.  
Bass Expander can also be selected using the 5 or 6 button  
and pressing the 1 or 2 button to select On or Off.  
These settings automatically store when you exit the menu.  
Press the BACK button to return to the previous menu.  
Press the MENU button to exit menu operation.  
I Menu Setup  
Whenever Setup menu is accessed initially, Menu Setup will be the  
default selection. Press the 1 or 2 button to enter the sub menu.  
Time menu  
Press the MENU button and select Time using the 5 or 6  
buttons, press the 1 or 2 button to enter. Press the BACK  
button to return to the previous menu. Press the MENU button to exit  
menu operation.  
Language is used to select the preferred language. Use the 1  
or 2 button to select English, French, German, Italian,  
Spanish or Dutch.  
H-Position changes the OSD position horizontally by using the 1  
or 2 button.  
Friday  
12:17  
Current Weekday  
Current Time  
Schedule  
Weekday  
Time  
1
Friday  
12:03  
Power Off  
Action  
On Program  
Active  
AV3  
V-Position changes the OSD position vertically by using the 1 or  
2 button.  
7V  
Duration is used to set the display time of the MENU by using the  
1 or 2 button.(5~120 seconds)  
Transparence is used to adjust transparence of menu. Use the 1  
or 2 button to adjust levels.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
GB  
GB  
MENU OPERATION  
I AV2 Setting  
Use the 5 or 6 button to select AV2 Setting and press the  
1 or 2 button to select YPbPr or RGBHV.  
Setup menu  
I PIP/POP Setup  
Use the 5 or 6 button to select PIP/POP Setup and press the  
1 or 2 button to enter the sub menu.  
Connect your PC to either PC-IN or RGBHV on the rear of the set.  
Once connected select PC mode or AV2 (RGBHV, see page 5 for  
AV2 input settings) via the INPUT button on your remote control.  
The set will become a monitor for the PC.  
I Native Resolution  
Use the 5 or 6 button to select Native Resolution and press  
the 1 or 2 button to select XGA or WXGA 1366 x 768.  
I PC Power Save  
Use the 5 or 6 button to select PC Power Save and press the  
1 or 2 button to select ON or OFF.  
PIP/POP Mode: Using the 1 or 2 button select the most  
suitable mode PIP1, PIP2, POP or Off. (Please refer to page 12.)  
i When Mode is set to Off, Sub Source and PIP Position will not  
work.  
Main Source is used to select input source (AV1, RGB, AV2, AV3,  
PC, DVI or Network ) for main picture by using the 1 or 2  
button.  
PC Adj. menu  
Press the MENU button and select PC Adj. using the 5 or 6  
buttons, press the 1 or 2 button to enter. Press the BACK  
button to return to the previous menu. Press the MENU button to exit  
menu operation.  
Sub Source is used to select input source (AV1, AV2, AV3, PC or  
DVI ) for sub picture by using the 1 or 2 button.  
i For a combination of main picture and sub picture: only DVI or  
Network input can assemble with other input source. For  
example, if main source is selected as AV1 input, then the sub  
source must be DVI or Network input.  
PIP Position: Using the 1 or 2 button it can be selected  
Top Left, Top Right, Bottom Right or Bottom Left.  
I Initial Settings  
This function returns all setting values except for Installation Mode.  
Auto Adjust is used to automatically detect incoming signal, and  
adjust itself to optimize its performance by using the 1 or 2  
button. If the image is not displayed properly, a manual adjustment  
is required (Refer to following adjustments).  
I Text Language  
Use the 5 or 6 button to select Text Language and press the  
1 or 2 button to select Western, Eastern, Russian, Arabic or  
Farsi.  
H-Position is used to move the horizontal picture position by using  
the 1 or 2 button.  
I Tile Mode  
This function allows you to split an image to suit your monitor grid  
format to create a video wall.  
Use the 5 or 6 button to select Tile Mode and press the 1  
or 2 button to enter the sub menu as follows.  
Tile Mode Active can be set On or Off using the 1 or 2  
button.  
V-Position is used to move the vertical picture position by using the  
1 or 2 button.  
Clock is used to eliminate flicker from the image by using the 1  
or 2 button.  
Phase is used to eliminate disorder from the image by using the  
1 or 2 button.  
H_Sets  
V_Sets  
H_Sets is used to divide the horizonal picture into more than one  
part, but the most is 5 parts (5 monitors).  
V_Sets is used to divide the vertical picture into more than one part,  
and the most is also 5 parts (5 monitors). Using the 1 or 2  
button to set.  
H Location is used to select one part of the horizonal picture to  
display on the current LCD Monitor using the 1 or 2 button.  
V Location is used to select one part of the vertical picture to  
display on the current LCD Monitor using the 1 or 2 button.  
Bezel H Adjustment is used to align the image horizontally with  
respect to the other monitors in the video wall to accomodate the  
bezel width using the 1 or 2 button. (0~10)  
Bezel V Adjustment is used to align the image vertically with  
respect to the other monitors in the video wall to accomodate the  
bezel width using the 1 or 2 button. (0~10)  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
GB  
GB  
INSTALLATION MODE  
I LED Light setting  
Installation Mode  
Select LED Light setting using the 5 or 6 button, once high-  
lighted you can select On or Off by pressing the 1 or 2  
button.  
Installation Mode  
VER -.--  
I DCR  
Select DCR using the 5 or 6 button, once highlighted you can  
select On or Off by pressing the 1 or 2 button.  
I Network Initial  
This function automatically installs the IP Address, Subnet, Gateway  
and DNS information.  
I Temperature Error  
This function can record times for abnormal temperture.  
Network Initial  
Temperature Error  
>>>  
I IP Address / Subnet / Gateway / DNS  
These 4 items display the LD-Net information. If LD-NET is NOT  
connected, all the items would be displayed as “000000000000”.  
i Disconnecting the mains supply before exiting Installation Mode  
will cancel the following features On program, RC inhibition, Address  
and Baud Rate.  
This LCD monitor allows you to set up the following:  
SETTING PROCEDURE  
1. Press and hold the GREEN button on the remote control for 5  
seconds. (Installation Mode will appear)  
2. Use the 5 or 6 button to highlight each option, use the 1 or  
2
button to adjust each option. Press the MENU button to exit  
the mode.  
I On Program  
Select ON program using the 5 or 6 button, select the start up  
position using the 1 or 2 buttons.  
(Off/ AV1/ RGB/ AV2/ AV3/ PC/ DVI or Network)  
I Max Volume  
Select Max volume using the 5 or 6 button, use the 1 or  
2 buttons to set the maximum volume required.  
I Winter mode  
This Function can be activated when the LCD monitor is used during  
cold temperature conditions, approximately 38˚F/ 4˚C or below to  
maintain picture performance.  
Using the 5 or 6 button select winter mode, once highlighted  
you can select ON or OFF by pressing the 1 or 2 button.  
IMPORTANT: The AC cord should not be disconnected during the  
operation of Winter mode function.  
When in winter mode, power consumption is higher than normal  
standby consumption. This is entirely due to the operation of heating  
circuitry. We strongly recommend to turn off Winter mode when the  
ambient temperature is above 38˚F/ 4˚C.  
I RC inhibition  
You can prevent unwanted remote control operation by selecting RC  
Inhibition.  
Select using the 5 or 6 button. Press the 1 or 2 button  
to select On or Off.  
To re-instate RC operation press and hold the green button on the  
remote control and select RC inhibition OFF.  
I Child Lock  
You can prevent unwanted operation of the LCD monitor via the  
buttons on the rear of the monitor.  
Select using the 5 or 6 button. Press the 1 button to select  
On or OFF. The ‘Child Lock’ OSD will appear if buttons are pressed  
when child lock is On.  
i Standby operates normally when childlock is set “On”.  
I Address  
Set the address for the LCD monitor (0 - 999).  
I Baud rate  
Select Baud rate using the 5 or 6 button. To set transmission  
speed RS232 or LD-NET communication for 19200 or 9600 Baud  
rate by pressing the 1 or 2 button.  
I Panel Protect  
Select Panel Protect using the 5 or 6 button, once highlighted  
you can select ON or OFF by pressing the 1 or 2 button.  
I AV Auto shut off  
Select AV Auto Shut Off using the 5 or 6 button, once high-  
lighted you can select On or Off by pressing the 1 or 2  
button.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GB  
GB  
OPERATION  
Selection of picture size  
Select screen size from FULL, FULL ALL, ZOOM 16:9, TITLE IN  
16:9, ZOOM 14:9, TITLE IN 14:9, NORMAL or NATURAL WIDE by  
pressing the WIDE button repeatedly on the Remote Control.  
i When in AV2 (RGBHV) orPC mode FULL or NORMAL can be  
selected.  
Note: Full - Set display area 100%  
i Only in DVI or AV2 (YPbPr) displaying high resolution content  
FULL and FULL ALL are selectable.  
Note : FULL - Set display area 95%  
FULL ALL - Set display area 100%  
All other inputs AV1, AV3, DVI or AV2 (YPbPr) (displaying lower  
resolutions) can select all picture sizes.  
I Full / Full All  
I Title In 14:9  
4:3  
14:9  
16:9  
Letterbox Video  
4:3  
14:9  
16:9  
Letterbox Video  
TITLES ON SCREEN  
TITLES ON SCREEN  
TITLES ON SCREEN  
TITLES ON SCREEN  
As zoom (14:9), but As zoom (14:9), but As zoom (14:9), but As zoom (14:9), but  
The whole screen  
is filled stretching  
the width.  
The whole screen  
is filled with the  
corrrect picture  
ratio.  
The black bars top  
and bottom are  
present and the  
height is  
The whole screen  
is filled stretching  
the height slightly  
at the edges.  
bottom is  
bottom is  
bottom is  
bottom is  
compressed even  
more to allow  
subtitles to be  
seen.  
compressed even  
more to allow  
subtitles to be  
seen.  
compressed even  
more to allow  
subtitles to be  
seen.  
compressed even  
more to allow  
subtitles to be  
seen.  
compressed.  
I Normal  
I Zoom 16:9  
4:3  
14:9  
16:9  
Letterbox Video  
4:3  
14:9  
16:9  
Letterbox Video  
The correct ratio is  
maintained with  
black bars on the  
left and right.  
Black bars left and Black bars left,  
right, picture height right, top and  
Black bars left and  
right, picture height  
is stretched.  
The correct picture  
width is maintained  
but the top and  
bottom are  
Zooms in slightly  
cropping the top  
and bottom.  
The black bars top  
and bottom are  
smaller and the  
picture height is  
compressed slightly.  
Zooms in slightly  
cropping the top  
and bottom.  
is stretched.  
bottom.  
cropped.  
I Title in 16:9  
I Natural Wide  
4:3  
14:9  
16:9  
Letterbox Video  
4:3  
14:9  
16:9  
Letterbox Video  
TITLES ON SCREEN  
TITLES ON SCREEN  
TITLES ON SCREEN  
TITLES ON SCREEN  
As Zoom (16:9),  
but bottom is  
compressed even  
more to allow  
subtitles to be  
seen.  
As Zoom (16:9),  
but bottom is  
compressed even  
more to allow  
subtitles to be  
seen.  
As Zoom (16:9),  
but bottom is  
compressed even  
more to allow  
subtitles to be  
seen.  
As Zoom (16:9),  
but bottom is  
compressed even  
more to allow  
subtitles to be  
seen.  
Stretches the  
The height is  
expanded to fill the  
whole screen.  
The picture fills the The black bars top  
picture horizontally  
to fill the screen.  
The picture is more  
stretched at the  
edges.  
screen and is  
proportionally  
correct.  
and bottom remain  
and the height is  
compressed to fit  
the picture area.  
I Zoom 14:9  
4:3  
14:9  
16:9  
Letterbox Video  
The correct picture  
width is maintained  
but the top and  
bottom are  
Zooms in slightly  
cropping the top  
and bottom.  
The black bars top  
and bottom are  
smaller and the  
picture height is  
compressed slightly.  
Zooms in slightly  
cropping the top  
and bottom.  
cropped.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GB  
GB  
OPERATION  
PIP/POP Operation  
Using this function, you can enjoy a DVI or Network program and  
an image (AV1, AV2, AV3 or PC input) at the same time.  
Press the ON/OFF button on the Remote Control repeatly to select  
PIP1, PIP2, POP or OFF mode.  
During the PIP/POP mode, press the Main/Sub Picture Swap but-  
ton will switch the location for main and sub picture.  
i Only the sound on the main picture is heard from the monitor  
speaker. The sound on the sub-picture cannot be heard.  
i The details for PIP/POP operation (eg,location for sub picture or  
input source for any picture,etc.), please refer to page 9.  
I PIP2 mode  
I PIP1 mode  
I POP mode  
I OFF mode  
The left picture is main picture, the right picture is sub picture.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GB  
GB  
OPERATION (IN TEXT MODE)  
Teletext Operation  
Teletext is only available via external sources.  
Teletext mode can be operated by the following buttons on the  
Remote Control.  
i Some buttons have dual functions  
TXT/TV  
Text Reveal  
Press TXT/TV button to select teletext. Press again will display:  
AV mode: AV/ TEXT mode/ MIX mode/ AV  
Note:  
MIX mode: AV (broadcast image) screen and the contents of TEXT  
(superimposed) are displayed simultaneously.  
CANCEL mode: TEXT/MIX MODE is cancelled temporarily and AV image is  
displayed.  
Press Text Reveal button to reveal hidden items on the text page.  
Some pages such as quiz pages have the answers hidden. The button may  
have to be held to keep the answer on the screen, or press again to remove  
the answer.  
In Reveal OFF, this indication is not given.  
Text Reveal button will only work whilst in text mode.  
If the signal is removed or disconnected, the monitor will revert to a blue back-  
ground with “No signal” message on the screen.  
If the TXT/TV button is pressed during the CANCEL mode, the CANCEL mode  
will be cancelled, and full text will resume.  
Page Up and Down  
To select the next or previous page.  
Text Subcode  
Volume Up/Down  
Press this button, “110/. . . .” will be displayed (e.g. the current page is 110).  
And press the NUMERIC buttons(0-9) to enter the sub page.  
For example, to select sub page 4, press NUMERIC buttons  
0-0-0-4, and "110/0004" will be displayed.  
To adjust the sound volume level.  
When finished, press the text subcode button to return to normal operation.  
Text Size  
Text Index  
Press Text Size button to enlarge the top half of the text page.  
Press Text Size button again to enlarge the bottom half of the text page.  
Press Text Size button again to return to the normal size page.  
(Normal/ top half enlargement/ bottom half enlargement/ normal)  
Note:  
During the top half or bottom half enlargement mode, if a page request is  
performed by [ 0-9 ] numeric buttons or the TEXT INDEX button, it will return  
to normal mode and a page will be requested.  
If HOLD ON / OFF is performed during the top half enlargement mode, it will  
hold the top half enlargement mode. (HOLD symbol will display)  
If HOLD ON / OFF is performed during the bottom half enlargement mode, it  
will hold the bottom half enlargement mode. (HOLD symbol will NOT display)  
Press this button to select one of the teletext index pages in TEXT, MIX or  
CANCEL mode.  
Text Red  
Use to select the red topic or page number at the bottom of the text page.  
Text Green  
Use to select the green topic or page number at the bottom of the text page.  
Text Yellow  
Use to select the yellow topic or page number at the bottom of the text page.  
Text Blue  
Use to select the blue topic or page number at the bottom of the text page.  
Text Cancel  
Press the TEXT CANCEL button in TEXT or MIX mode, the TV picture appears  
on the screen.  
Press this button once again or press TXT/TV button, CANCEL mode will be  
cancelled.  
In CANCEL mode, "CAN" is always displayed on the upper left of the screen.  
Text Hold  
Press Text Hold button to stop page request and updating.  
HOLD ON:  
The Hold symbol will appear instead of the page number.  
Update of TELETEXT is forbidden. It holds on the current TEXT screen display  
now.  
HOLD OFF:  
The hold symbol is replaced with the page number.  
TELETEXT page data is updated.  
The present page is re-requested. (header roll)  
Text Hold button will only work whilst in TEXT Mode.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GB  
GB  
SPECIFICATIONS / HELPFUL HINTS  
Helpful hints  
Specification  
I NO PICTURE NO SOUND  
Check if monitor is plugged in.  
Check monitor is not in standby mode.  
Common specification  
Power source  
100~240V 50Hz / 60Hz  
Colour system  
PAL / NTSC / NTSC4.43/ SECAM  
I POOR PICTURE  
Adjust BRIGHTNESS/ CONTRAST LEVELS (too low).  
AV terminal  
AV1: Scart CENELEC Standard  
Input: Composite video, RGB (5V RGB with 5V sync to  
pin 14) and audio-L/R  
Output: composite video from AV3 and audio L/R  
I NO COLOUR, PICTURE OK  
Adjust COLOUR control.  
Check lead connections.  
Does the signal input have colour.  
AV2: BNC  
Input: RGB, H and V / Y, Pb, Pr and audio L/R  
Output: RGB, H and V / Y, Pb, Pr  
I REMOTE CONTROL DOES NOT WORK  
Check batteries are inserted correctly.  
Check condition of batteries.  
AV3: BNC  
Input: Composite video  
Output : Composite video  
Check to see if remote control inhibit is set ON.  
Audio Monitor Out: CINCH L/R  
Audio Speaker Out: 2 x 10W  
I PICTURE OK, NO SOUND  
Check external speakers are connected correctly.  
Check lead connections to external equipment.  
Check volume turned down or mute selected.  
DVI  
PC  
Input :  
Input:  
DVI-D GROUP Standard  
Mini D-SUB 15 PIN and  
Audio 3.5mm Jack  
Serial Port: RS232C: Input / Output  
Net Organiser: POA-LN02 (optional)  
When ordering these products, give the Name and Type No. to the  
sales dealer.  
Contrast Ratio  
1500:1  
Screen(inches/ cm)  
(viewing measured  
diagonally)  
52”/132cm  
Display Native Resolution  
Viewing angles  
Dimensions (WxHxD)  
Weight (kg)  
1920X1080  
H:176°, V:176°  
1304 x 800 x 234mm  
83  
CE52SR1  
1304  
1216  
1304  
1120.6  
1152  
234  
473.9  
215.7  
233.1  
204  
176.7  
324  
280  
420  
M6 x 10  
Wall mount  
fixing  
61.4  
480  
516  
800  
140  
648  
712  
189.4  
18  
20  
140  
280  
420  
560  
359.4  
444.6  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GB  
GB  
PC/DVI-D / COMPONENT SIGNAL SUPPORT TIMING LIST  
PC signal support timing  
H
orizontal  
Vertical  
Resolution  
Remark  
Frequency  
(kHz)  
Frequency  
(Hz)  
720_400  
640_480  
640_480  
640_480  
640_480  
640_480  
640_480  
800_600  
800_600  
800_600  
800_600  
800_600  
DOS (VGA)  
VGA VESA 60Hz  
VGA VESA 75Hz  
VGA VESA 72Hz  
VGA VESA 85Hz  
Mac. 13  
31.47  
31.43  
37.50  
37.86  
43.27  
70.09  
59.88  
75.00  
72.81  
85.00  
66.67  
66.60  
35.00  
34.97  
35.16  
37.88  
46.875  
34.50  
38.00  
53.67  
49.72  
48.36  
56.47  
60.02  
48.50  
60.31  
61.00  
68.68  
60.24  
37.5  
Mac LC 13”  
56.25  
60.32  
SVGA VESA 56Hz  
SVGA VESA 60Hz  
75.00  
55.38  
60.51  
85.06  
74.55  
60.00  
70.07  
75.03  
60.02  
74.92  
75.70  
85.00  
75.08  
50.00  
60.00  
75.025  
60.01  
59.98  
60.01  
60.18  
SVGA VESA 75Hz  
SVGA  
SVGA  
SVGA VESA 85Hz  
Mac. 16  
XGA VESA 60Hz  
XGA VESA 70Hz  
XGA VESA 75Hz  
XGA  
XGA  
XGA  
XGA VESA 85Hz  
MAC_Normal 19”  
720p-50Hz  
SXGA VESA 60Hz  
SXGA VESA 75Hz  
800_600  
832_624  
1024_768  
1024_768  
1024_768  
1024_768  
1024_768  
1024_768  
1024_768  
1024_768  
1280_720  
1280_960  
1280_1024  
60.00  
79.976  
63.370  
63.34  
63.74  
63.79  
63.90  
81.13  
61.20  
61.85  
71.40  
65.35  
65.12  
68.68  
80.00  
75.00  
48.36  
47.73  
28.125  
33.75  
1280_1024  
1280_1024  
SXGA  
SXGA  
SXGA  
SXGA  
SXGA  
1280_1024  
1280_1024  
1280_1024  
1280_1024  
1152_900  
1152_900  
1152_900  
1400_1050  
60.00  
76.107  
SXGA  
SXGA  
65.20  
66.00  
75.60  
60.12  
59.90  
75.06  
75.00  
60.00  
60.01  
60.03  
50.00  
SXGA  
SXGA  
SXGA +  
SXGA +  
MAC_Normal 21”  
Mac ll  
UXGA VESA 60Hz  
WXGA  
WXGA  
1080i-50Hz  
1080i-60Hz  
1400_1050  
1152_870  
1280_1024  
1600_1200  
1366_768  
1360_768  
1920_1080  
1920_1080  
60.00  
The monitor can be automatically adjusted in pc mode when receiving a standard VESA signal  
It will be displayed as XGA when the monitor is receiving a XGA or WXGA signal.  
Horizontal  
Frequency  
(kHz)  
31.43  
37.86  
37.5  
34.97  
35  
35.16  
37.88  
46.875  
49.72  
48.36  
60.23  
56.47  
60.24  
68.68  
63.98  
31.7  
Vertical  
Frequency  
(Hz)  
Component signal support timing  
Horizontal  
(KHz)  
Remark  
Resolution  
Vertical frequency  
(Hz)  
Remark  
Resolution  
frequency  
640_480  
640_480  
640_480  
640_480  
640_480  
800_600  
800_600  
800_600  
832_624  
1024_768  
1024_768  
1024_768  
1024_768  
1152_870  
1280_1024  
720_480  
59.88  
VGA VESA 60Hz  
VGA VESA 72Hz  
VGA VESA 75Hz  
MAC LC 13"  
72.81  
75  
66.6  
66.67  
56.25  
60.32  
75  
74.55  
60  
75.03  
70.07  
75.08  
75.06  
60.02  
59.94  
MAC_ NORMAL 13"  
SVGA VESA 56Hz  
SVGA VESA 60Hz  
SVGA VESA 75Hz  
MAC_ NORMAL 16"  
XGA VESA 60Hz  
XGA VESA 75Hz  
XGA VESA 70Hz  
MAC_ NORMAL 19"  
MAC_ NORMAL 21"  
SXGA VESA 60Hz  
480p  
720_480  
59.94  
480I  
15.73  
575p
768_575  
31.25  
50  
768_575
15.63  
50
575I
720p-50Hz  
1280_720  
37.5  
50  
720p-60Hz  
1280_720  
45  
60  
11366_768
48.36
60
WXGA
WXGA  
1360_768  
47.7  
60  
1
1920_1080  
1920_1080  
1920_1080  
1920_1080  
1920_1080  
1920_1080  
1920_1080  
28.125  
33.75  
56.25  
67.5  
50  
60  
50  
60  
24  
25  
30  
1080i-50Hz  
1080i-60Hz  
HDTV1080p-50Hz  
HDTV1080p-60Hz  
27.00  
28.13  
33.75  
HDTV1080p-24Hz  
HDTV1080p-25Hz  
HDTV1080p-30Hz  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RS232C Command Tables  
Functional Execution Command Table  
Command  
Item  
POWER ON  
C00  
POWER OFF  
C01  
C24  
Wide “Natural” direct  
Wide “Zoom 16:9” direct  
Wide “Title in 16:9” direct  
Wide “Zoom 14:9” direct  
Wide “Title in 14:9” direct  
Wide “Full” direct  
Wide “Normal” direct  
AV1 direct  
C25  
C26  
C27  
C28  
C29  
C0F  
C70  
C71  
RGB direct  
C72  
AV2 RGBHV direct  
AV2 YPbPr direct  
AV3 direct  
C73  
C74  
C75  
DVI direct  
PC direct  
C76  
C64  
PC Auto adjust  
Factory settings  
Power save ON  
Power save OFF  
Child lock ON  
Child lock OFF  
RC inhibition OFF  
RC inhibition ON  
C92  
CF PSAVE ON  
CF PSAVE OFF  
CF CLOK ON  
CF CLOK OFF  
CF DEA RMCY  
CF DEA RMCN  
Image control Read Command Table  
Status read command  
Item  
Status of Brightness.  
CR BRIGHT  
CR CONT  
Status of Contrast.  
Status of Color.  
CR COLOR  
CR TINT  
Status of Tint.  
Sharpness.  
CR SHARP  
CR WBAL  
CR WBAL-R  
CR WBAL-G  
CR WBAL-B  
CR NZRED  
CR FILM  
Status of White Balance Mode information.  
Status of White Balance Red  
Status of White Balance Green  
Status of White Balance Blue  
Status of Noise reduction setting.  
Status of Film mode setting.  
Status of Image selection.  
The same as PICTURE mode  
Status of DCDi setting.  
Status of ACC/ACM setting.  
Status of CCS setting.  
CR IMAGE  
CR DCDI  
CR ACCACM  
CR CCS  
Status of MPEG NR setting.  
CR MPEGNR  
PC Read Command Table  
Status read command  
Item  
Status of Horizontal position.  
Status of Vertical position.  
Status of PHASE value.  
CR H-POS  
CR V-POS  
CR PHASE  
Status of CLOCK value.  
CR CLOCK  
Input Read Command Table  
Status read command  
Item  
Status of Input selection.  
Status of Input source mode.  
Status of system of Input mode.  
CR INPUT  
CR SOURCE  
CR SYSTEM  
Screen Read Command Table  
Status read command  
Item  
Status of screen size The same of WIDE mode  
CR SCREEN  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RS232C Command Tables  
Time Read Command Table  
Status read command  
CR PANELH  
Item  
Status of accumulated lifetime of panel.  
The same as CR_LAMPH Command  
Status of accumulated lifetime of monitor  
The same as CR_PROJH Command  
CR MONH  
Sound control Read Command Table  
Status read command  
Item  
Status of volume value.  
Status of MUTE.  
CR VOLUME  
CR MUTE  
Setting Read Command Table  
Status read command  
Item  
Status of Language selection.  
CR LANG  
Status of Power management setting  
Status of Tile mode ON/OFF setting  
CR P-MANE  
CR TILE  
Status of Tile mode, the number of Horizontal array.  
Status of Tile mode, the number of Vertical array.  
Status of Tile mode, the number of Horizontal allocation.  
Status of Tile mode the number of Horizontal allocation.  
Status of Tile mode, the width of bezel Horizontal  
Status of Tile mode, the width of bezel (Vertical)  
Status of On Program information/  
CR TILE-HSETS  
CR TILE-VSETS  
CR TILE-HLOCAT  
CR TILE-VLOCAT  
CR TILE-BZLHADJ  
CR TILE-BZLVADJ  
CR ONPROG  
Status of Winter mode Information.  
CR WINTERMODE  
CR PANELPROTECT  
CR LEDLIGHT  
Statuses of Panel protect Information.  
Status of LED light Information.  
Status of AV auto shut OFF Information.  
Statuses of Child lock Information.  
CR AVAUTOSHUT  
CR CHILDLOCK  
CR RCINHIBITION  
Status of RC Inhibit Information.  
Other Read Command Table  
Status read command  
Item  
Status of the operation of the monitor.  
Status of with or without signal.  
Status of Freeze setting.  
CR STATUS  
CR SIGNAL  
CR FREEZE  
Statuses of fun lock error.  
CR FANLOCK  
CR TEMP  
Status of current temperature value.  
UK5 Read Command Table (Basic Command)  
Command  
Item  
Note  
CR0  
Power  
On, Standby, power error,  
AV1, AV2, ..., DVI, PC  
Auto, Normal, Full, …  
Dynamic, Standard, …  
Signal / No signal  
On / Off  
CR1  
Input Mode  
CR WIDE  
CR PICTURE  
CR SIGNAL  
CR CHILD  
CR PSAVE  
CRTM  
Wide mode  
Picture mode  
Signal existence  
Child lock  
Power save  
Panel usage time  
RC inhibition  
Model number  
On / Off  
CR RMC  
CR MDL  
On / Off  
52LH1  
Error code Table  
Error code  
Receiving the data that cannot be decoded  
The wrong indication of parameter  
Wrong figured number, or wrong word is included.  
Normal receiving no error  
If the command of out of range is directly entered  
valuable parameter.  
No matching with Hardware  
(Command for optional function which is not equipped.)  
If the command of “Out of range” is entered by  
inclement or decrements by numeric value.  
While capturing the picture, no execution. Wait and  
transmit command again.  
While PIN code is in operation, no execution.  
Wait and transmit command again.  
The errors not including above.  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Part No. 1KA6P1P0456--  
N5VYS (1)  
Printed in U.K.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

PYLE Audio Stereo Amplifier PCA4 User Guide
Raritan Engineering Power Supply AUATC User Guide
RCA CRT Television 20F530T User Guide
Roberts Radio Clock Radio DreamDock User Guide
RocketFish Network Card RF BPRACDC2 User Guide
Russound Stereo Amplifier CAV66 Six Zone User Guide
Sakar Digital Camera 27290 User Guide
Samsung Car Stereo System 181B User Guide
Sanyo Projector PDG DSU21B User Guide
Seiko Watch SOLAR DIVERS 200M Watch User Guide