INSTRUCTION MANUAL
Digital Camera
Please read these instructions carefully before using the camera.
Keep this manual in a safe place for later reference.
Download from Www.Somanuals.com. All Manuals Search And Download.
READ THIS FIRST
Trademark Information
„
„
„
„
„
Microsoft® and Windows® are U.S. registered trademarks of Microsoft Corporation.
Pentium is a registered trademark of Intel Corporation.
Macintosh is a trademark of Apple Inc.
SD™ is a trademark.
SDHC™ is a trademark.
®
„
Other names and products may be trademarks or registered trademarks of their
respective owners.
Product Information
„
Product design and specifications are subject to change without notice. This
includes primary product specifications, software, software drivers, and user’s
manual. This User Manual is a general reference guide for the product.
The product and accessories that come with your camera may be different from
those described in this manual. This is due to the fact that different retailers often
specify slightly different product inclusions and accessories to suit their market
requirements, customer demographics, and geographical preferences. Products
very often vary between retailers especially with accessories such as batteries,
chargers, AC adapters, memory cards, cables, pouches, and language support.
Occasionally a retailer will specify a unique product color, appearance, and!internal
memory capacity. Contact your dealer for precise product definition and! included
accessories.
„
„
„
The illustrations in this manual are for the purpose of explanation and may differ
from the actual design of your camera.
The manufacturer assumes no liability for any errors or discrepancies in this user
manual.
EN-2
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY INSTRUCTIONS
Read and understand all Warnings and Cautions before using this product.
Warnings
If foreign objects or water have entered the camera, turn the power off
and remove the battery.
Continued use might cause fire or electric shock. Consult the store of
purchase.
If the camera has fallen or its case has been damaged, turn the power
off and remove the battery.
Continued use might cause fire or electric shock. Consult the store of
purchase.
Do not disassemble, change or repair the camera.
This might cause fire or electric shock. For repair or internal inspection, ask
the store of purchase.
Do not use the camera in areas near water.
This might cause fire or electric shock. Take special care during rain, snow,
on the beach, or near the shore.
Do not place the camera on inclined or unstable surfaces.
This might cause the camera to fall or tilt over, causing damage.
Keep the battery out of the reach of children.
Swallowing the battery might cause poisoning. If the battery is accidentally
swallowed, immediately consult a physician.
Do not use the camera while you are walking, driving or riding a
motorcycle.
This might cause you to fall over or result in traffic accident.
Please use battery with complete external seals.
Do not use battery from which the seals have been damaged or removed.
This may cause leakage, explosion, or injury.
EN-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Cautions
Insert the battery paying careful attention to the polarity (+ or –) of the
terminals.
Inserting the battery with its polarities inverted might cause fire and injury, or
damage to the surrounding areas due to the battery rupturing or leaking.
Do not fire the flash close to anyone’s eyes.
This might cause damage to the person’s eyesight.
Do not subject the LCD monitor to impact.
This might damage the glass on the screen or cause the internal fluid to
leak. If the internal fluid enters your eyes or comes into contact with your
body or clothes, rinse with fresh water. If the internal fluid has entered your
eyes, consult a physician to receive treatment.
Camera is a precision instrument. Do not drop it, strike it or use
excessive force when handling the camera.
This might cause damage to the camera.
Do not use the camera in humid, steamy, smoky, or dusty places.
This might cause fire or electric shock.
Do not remove the battery immediately after long period of continuous
use.
The battery becomes hot during use. Touching a hot battery might cause
burns.
Do not wrap the camera or place it in cloth or blankets.
This might cause heat to build up and deform the case, resulting in fire. Use
the camera in a well-ventilated place.
Do not leave the camera in places where the temperature may rise
significantly, such as inside a car.
This might adversely affect the case or the parts inside, resulting in fire.
Before you move the camera, disconnect cords and cables.
Failure to do this might damage cords and cables, resulting in fire and
electric shock.
EN-4
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning:
TO PREVENT THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE
FOR AMERICAN USERS
The following advisory is included in accordance with the laws of the State of California
(USA):
WARNING:
This product contains chemicals, including lead, known to the States of California to
cause cancer, birth defects or other reproductive harm. Wash hands after handling.
zꢀThis equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designated to
provide reasonable protection against harmful interference in
a
residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
*
*
*
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
*
Consult the dealer or an experienced radio/TV technician for help.
zꢀChanges or modifications not expressly approved by the party responsible for
compliance could void the userís authority to operate the equipment.
EN-5
Download from Www.Somanuals.com. All Manuals Search And Download.
FOR CANADIAN USERS
zꢀThis Class B digital apparatus complies with Canadian ICES-003
FOR EU USERS
The symbol mark and recycling systems described below apply to
EU countries and do not apply to countries in other areas of the
world.
Your SANYO product is designed and manufactured with high
quality materials and components which can be recycled and/or
reused.
The symbol mark means that electrical and electronic equipment,
batteries and accumulators, at their end-of-life, should be disposed
of separately from your household waste.
Note:
If a chemical symbol is printed beneath the symbol mark, this
chemical symbol means that the battery or accumulator contains a
heavy metal at a certain concentration.
This will be indicated as follows: Hg: mercury, Cd: cadmium, Pb:
lead
In the European Union there are separate collection systems for
used electrical and electronic equipment, batteries and
accumulators.
Please, dispose of them correctly at your local community waste
collection/recycling centre.
Please, help us to conserve the environment we live in!
Manufacturer and Address
SANYO Electric Co., Ltd.
5-5, Keihan-hondori, 2-chome,
Moriguchi City, Osaka, Japan
Authorized Representative and Address
SANYO FISHER Sales (Europe) GmbH
Stahlgruberring 4, D-81829 Munich, Germany
EN-6
Download from Www.Somanuals.com. All Manuals Search And Download.
Symbols used in this manual
„ꢀPoints giving some extended instructions or special points to pay attention to.
You many find the answers to questions or problems concerning camera operation in
the sections “Troubleshooting”.
FCC information
Tested To Comply
With FCC Standards
FOR HOME OR OFFICE USE
Declaration of Conformity
Model number: VPC-T1284
Trade Name: SANYO
Responsible party: SANYO FISHER COMPANY
Address: 21605 Plummer Street
Chatsworth, California 91311
Telephone No.: (818) 998-7322
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
Canadian ICES-003 information
This class B digital apparatus complies with Canadian ICES-003.
EN-7
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes on Battery Usage
When you use the battery, carefully read and strictly observe the Safety Instructions
and the notes described below:
„
„
Use only the specified battery.
Avoid extremely cold environments as low temperatures can shorten the battery life
and reduce camera performance.
When you are using a new rechargeable battery or a rechargeable battery that has
not been used for an extended period of time, it may affect the number of images
that can be captured. Therefore, to maximize its performance and lifetime, we
recommend that you fully charge the battery and discharge it for at least one
complete cycle before use.
„
„
„
„
The battery may feel warm after a long period of continuous use of the camera or the
flash. This is normal and not a malfunction.
The camera may feel warm after a long period of continuous use. This is normal and
not a malfunction.
If the battery is not to be used for a long period of time, remove it from the camera to
prevent leakage or corrosion and store it after no battery power is left. Stored for a
long time in a fully charged condition, its performance may be impaired.
Always keep the battery terminals clean.
There is a risk of explosion if the battery is replaced by an incorrect type.
Dispose of used battery according to the recycle instructions.
Charge the rechargeable!battery fully before using for the first time.
To prevent short-circuiting or fire, keep the battery away from other metal objects
when carrying or storing.
„
„
„
„
„
CAUTION
„
„
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
- SANYO Li-ion Battery, 3.7V, 700mAh
EN-8
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
10 INTRODUCTION
10 Overview
10 Package Contents
39 TRANSFERRING FILES TO
YOUR COMPUTER
39 Downloading Your Files
11 GETTING TO KNOW YOUR
CAMERA
11 Front View
40 USING THE CAMERA AS A PC
CAMERA
40 Install the PC camera driver
12 Rear View
13 LCD Monitor Display
41 EDITING SOFTWARE
INSTALLATION
42 SPECIFICATIONS
43 APPENDIX
43 Possible Number of Shots
44 Troubleshooting
15 GETTING STARTED
15 Preparation
16 Charging the Battery
17 Initial Settings
19 CAPTURE MODE
19 Capturing Images
20 Setting the Scene Mode
22 Setting the Panorama Mode
23 Taking Images When the Smile
Feature Is On
45 Connecting to a PictBridge Compliant
Printer
24 Recording Shots into Multiple Image
Layout
24 Recording Shots using Face
Detection Technology
25 VIDEO MODE
25 Recording Video Clips
25 Playing Back Video Clips
26 PLAYBACK MODE
26 Playing Back Still Images
27 Thumbnail Display
27 Removing Red-eye
28 Attaching Voice Memos
29 Protecting Images
30 Erasing Images
31 MENU OPTIONS
31 Capture Menu
34 Video Menu
35 Playback Menu
37 Setup Menu
EN-9
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
Overview
Congratulations on your purchase of the new digital camera.
Capturing high-quality digital images is fast and easy with this state-of-the-art smart
camera. Equipped with a 12.0-megapixel CCD, this camera is capable of capturing
images with a resolution of up to 3968 x 2976 pixels.
Package Contents
Carefully unpack your camera and ensure that you have the following items:
Common Product Components:
„
„
„
„
„
„
„
„
„
„
Digital Camera
Instruction manual
Software CD-ROM
USB cable
AV cable
Camera strap
Camera pouch
Rechargeable lithium-ion battery
Battery charger
AC adapter for battery charger
Optional Accessory:
„
SD/SDHC memory card
„
Accessories and components may vary by retailer.
EN-10
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING TO KNOW YOUR CAMERA
Front View
1
2
3
5
9
8
4
6
7
1. Status LED
2. Flash
3. ON/OFF Power button
4. Self-timer LED
5. Mode switch
6. Lens
7. Microphone
8. Zoom lever
9. Shutter button
EN-11
Download from Www.Somanuals.com. All Manuals Search And Download.
Rear View
a
b
c
1
d
2
3
g
4
5
6
f
e
7
8
9
Function
Video Mode
Item
Capture Mode
Playback Mode
1. Shutter button
Record button
Still image: to capture mode
Video clip: to video mode
2. Playback mode
Playback mode
Still image: to capture mode
Video clip: to video mode
3. Capture menu
4. OO!Focus / c
5. a!Flash / f
Video menu
OO!Focus / c
--
Playback menu
--
Next Image / f
--
6. e!Self-timer / d
e!Self-timer / d
7. s!Compensation / e
Previous Image / e
--
>
8.
Still image: to display image
Records voice memo ( if “Voice
Memo” is “On”).
--
--
--
--
Video clip: to play video clip
9.
Delete
EN-12
Download from Www.Somanuals.com. All Manuals Search And Download.
LCD Monitor Display
1
2
Capture mode
1. Zoom status
2. Battery condition
18
3
4
17
16
[l]
[o]
[n]
[m]
Full battery power
Medium battery power
Low battery power
No battery power
5
6
7
15
14
13
8
3. Flash mode
[Blank] Auto
12
11 10 9
[a]
[d]
[c]
[`]
[_]
Flash On
[
[
[
]
]
]
Cont.flash
Pre-shot
Coupl.shot
Flash Off
Red-eye
Slow Sync
Pre-flash
15. Slow shutter warning
16. White balance
[Blank] Auto
4. Storage media
[
[
[
]
]
]
Internal memory (no card)
SD/SDHC memory card
Histogram
[
[
[
[
[
[
]
]
]
]
]
]
Incand.
Fluoresc.1
Fluoresc.2
Daylight
5.
6. Main focus area
7. Image quality
Cloudy
[
[
[
]
]
]
Fine
Standard
Economy
Manual WB
17. Focus setting
[Blank] Auto
8. Image size resolution
[
[
[
]
]
]
Face Detect
Macro
[
[
[
[
[
]
]
]
]
3968 x 2976
3264 x 2448
2304 x 1728
1600 x 1200
640 x 480
Infinity
18. Mode icon / Scene mode
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
]
]
]
]
]
]
]
]
]
]
]
]
]
]
]
]
]
]
]
]
]
]
Auto
]
Smile Detection
Anti-shake
Panorama
Portrait Man
Portrait Lady
Landscape
Sports
Night Portrait
Night Scene
Candlelight
Fireworks
Text
Sunset
Sunrise
Splash Water
Flow Water
Snow
9. Available number of shots
10. ISO
[Blank] Auto
[
[
[
[
[
]
]
]
]
]
ISO 100
ISO 200
ISO 400
ISO 800
ISO 1600
11. Self-timer icon
[f]
[g]
[h]
2 sec.
10 sec.
10+2 sec.
12. Date and time
13. [
[
]
]
Exposure compensation
Backlight correction
(Adjust exposure value with the se / af
buttons)
Beach
Pets
14. Capture mode icon
[Blank] Single
Natural Green
Program AE
[
[
[
[
]
]
]
]
Continuous
P
AEB (Auto Exposure Bracketing)
Album Shot
Burst
EN-13
Download from Www.Somanuals.com. All Manuals Search And Download.
Video mode
1
2
3
1. Zoom status
2. Flash mode
12
11
3. Battery condition
4. Storage media
5. Main focus area
6. Video quality
4
5
6
7
7. Video resolution
8. Available recording time/Elapsed time
9. Self-timer icon
10.Date and time
11. Focus setting
00 : 00 : 08
8
10
9
12.Mode icon
13.Sound off icon
Playback mode!-!Still image playback
1. Voice memo
1
2
2. Battery condition
3. Storage media
4. Histogram
15
14
:Play
3
4
5. Image quality
13
12
6. ISO
5
6
7
7. Image size resolution
8. File number
11
100- 0001
9. Folder number
10.Date and time
11. Exposure value
12.Aperture value
13.Shutter speed value
14.Protect icon
E
9
8
10
15.Mode icon
Playback mode!-!Video playback
1. Video status bar
1
2. Elapsed time
Total
00 : 00 : 08
Play
3. File number
4. Folder number
00 : 00 : 01
8
5
2
5. Sound off icon (When the OZc button is
pressed during video playback)
6. Play mode
q
q
7. Mode icon
8. Total recorded time
100 - 0001
R
E
7
6
4
3
EN-14
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED
Preparation
1. Attach the camera strap.
2. Open the battery/memory card cover.
3. Insert the supplied battery with correct orientation as
shown. (label side back)
4. Insert an SD/SDHC memory card (Optional).
„
The camera has 32MB internal memory (26MB
available for image storage), but you can load an
SD/SDHC memory card to expand the camera’s
memory capacity.
Be sure to format the memory card with this
camera before its initial usage.
„
5. Close the battery/memory card cover and make sure it is
locked securely.
„
To prevent valuable data from being accidentally erased from
an SD/SDHC memory card, you can slide the write protect tab
(on the side of the SD/SDHC memory card) to “LOCK”.
To save, edit, or erase data on an SD/SDHC memory card,
you must unlock the card/
„
„
To prevent damaging of an SD/SDHC memory card, be sure
to turn off the power when inserting or removing the SD/
SDHC memory card. If inserting or removing the SD/SDHC
memory card with the power on, the camera will automatically turn off.
EN-15
Download from Www.Somanuals.com. All Manuals Search And Download.
Charging the Battery
Charge the battery fully with the supplied battery charger before use.
1. Insert the battery into the battery charger. (Battery label side up)
2. Connect the power cord to the charger and
insert the plug into a wall outlet.
1
„
The status LED on the charger lights red
when charging has started and lights
green when charging is completed. The
LED also lights green if no battery is
inserted into the charger.
2
„
„
Charging time varies according to the
ambient temperature and the status of battery.
Remove the battery after charging is completed.
„
„
The battery may feel warm after it has been charged or immediately after being used. This is
normal and not a malfunction.
When using the camera in cold areas, keep the camera and battery warm by holding them inside
your outer clothes.
EN-16
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Settings
Setting the Date and Time
The date/time needs to be set if and when:
„
„
The camera is turned on for the first time.
The camera is turned on after leaving the camera without the battery for an
extended period of time.
When the date and time information is not displayed on the LCD monitor, follow these
steps to set the correct date and time.
1. Slide the mode switch to [ ] or [ ]; or press
the
button.
2. Press the
button.
3. Select [Setup] with the af button.
4. Select [Date/Time] with the OOc
/
ed
buttons, and press the
button.
5. Select the date format with the OOc / ed
buttons, and press the
button.
„
Select the item’s field with the se / af
buttons and adjust the value for the date and
time with the OOc / ed buttons.
„
„
The time is displayed in 24-hour format.
After confirming all settings are correct, press
the
button.
6. To exit from the [Setup] menu, press the
button.
EN-17
Download from Www.Somanuals.com. All Manuals Search And Download.
Choosing the Language
Specify in which language menus and messages are to be displayed on the LCD monitor.
1. Slide the mode switch to [ ] or [ ]; or press the
button.
2. Press the
button.
3. Select [Setup] menu with the af button.
4. Select [Language] with the OOc / ed buttons
and press the
button.
5. Select the displayed language with the OOc /
ed buttons and press the button
The setting will be stored.
.
„
6. To exit from the [Setup] menu, press the
button.
Formatting the Memory Card or Internal Memory
This utility formats the memory card (or internal memory) and erases all stored images
and data.
1. Slide the mode switch to [ ] or [ ]; or press
the
button.
2. Press the
button.
3. Select [Setup] menu with af button.
4. Select [Format] with the OOc / ed buttons,
then press the
button.
5. Select [Execute] with the OOc / ed buttons,
and press the button
To cancel formatting, select [Cancel] and
press the button
.
„
.
6. To exit from the [Setup] menu, press the
button.
EN-18
Download from Www.Somanuals.com. All Manuals Search And Download.
CAPTURE MODE
Capturing Images
Your camera is equipped with a 2.8" full color TFT LCD monitor to help you compose
images, playback recorded images/video clips or adjust menu settings.
1. Press the ON/OFF button to turn the power on.
„
The status LED lights green and the camera is initiated.
2. Slide the mode switch to [ ].
3. Compose your image in the LCD monitor.
„
Turn the zoom lever to
subject on the LCD monitor.
Turn the zoom lever to
angle image.
side to zoom in on the subject, and enlarges the
„
side to zoom out on the subject, and provides a wider
4. Press the shutter button.
a
„
Pressing the shutter button down halfway
b
automatically focuses and adjusts the
exposure, and pressing the shutter button
down fully captures the image.
The focus area frame turns green when
the camera is in focus and the exposure is
calculated.
„
„
When the focus is not suitable, the frame
of the focus area turns red.
EN-19
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Scene Mode
By simply selecting one of the available 21 scene modes, you can capture the image
with the most appropriate settings.
1. Slide the mode switch to [SCENE].
2. Select the desired scene mode with the se /
af buttons, and press the
button.
3. Compose the image and press the shutter
button.
!
The table below will help you choose the appropriate scene mode:
Scene mode
Description
Smile Detection Select this mode to automatically capture an image when a smiling
face is detected.
Anti-shake
This mode minimizes the influences of hand shaking when you want
to capture an image.
Panorama
Select this mode when you want to capture a series of shots then
stitch them together with software to make a single photo on the
computer.
Portrait Man
Portrait Lady
Landscape
Select this mode when you want to capture an image that makes a
man stand out against a blurred background.
Select this mode when you want to capture an image that makes a
lady stand out against a blurred background.
Select this mode when you want to capture an image with infinity
focus, hard sharpness and high saturation.
Sports
Select this mode when you want to capture fast-moving subjects.
Night Portrait
Select this mode when you want to capture people with an evening
or night scene background.
EN-20
Download from Www.Somanuals.com. All Manuals Search And Download.
Scene mode
Description
Night Scene
Select this mode when you want to capture dark scenes such as
night views.
Candlelight
Fireworks
Select this mode when you want to capture photos of candlelight
scene, without spoiling the ambience.
Select this mode when you want to capture fireworks clearly with
optimal exposure. The shutter speed becomes slower, so using a
tripod is recommended.
Text
Select this mode when you want to capture an image that contains
black and white subjects like printed documents.
Sunset
Select this mode when you want to capture a sunset. This mode
helps keep the deep hues in the scene.
Sunrise
Splash Water
Select this mode when you want to capture a sunrise. This mode
helps keep the deep hues in the scene.
Select this mode when you want to capture photos of splashing
water.
Flow Water
Snow
Select this mode when you want to capture the soft flowing water.
Select this mode when you want to capture clear snow scenes
without darkened subjects and bluish tint.
Beach
Select this mode when you want to capture bright beach scenes and
sunlit water surfaces.
Pets
Select this mode when you want to capture your pets. Shoot from
their eye level.
Natural Green
Select this mode when you want to capture the green scenery
background such as forest. This mode helps to brighten the colors.
Program AE
This mode allows you to manually set parameters other than the
shutter speed and the aperture value.
P
EN-21
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Panorama Mode
This mode is designed to make it easier to take a series of shots then stitch them
together with software to make a single image. You can capture a photographic subject
that won’t fit into a single frame, such as a landscape, and stitch it together later with a
®
program such as Arcsoft Panorama Maker 4.0 application.
1. Slide the mode switch to [SCENE].
2. Select [Panorama] with the se / af buttons, and press the
3. Select the photographic direction with the se / af buttons.
4. Shoot the first image.
button.
„
The next image appears beside the previous image.
5. Orient the camera so that the second frame overlaps a small portion of the
photographic subject of the first image and press the shutter button to capture the
next image.
6. Follow the same steps to capture subsequent images in the sequence.
7. Finish the sequence by pressing the
last image has been recorded.
button or switch to another mode after the
®
(e.g.: Editing with Arcsoft Panorama Maker 4.0)
®
®
Arcsoft Panorama Maker 4.0 - Like magic, ArcSoft Panorama Maker 4 turns any
series of overlapping photos into a gorgeous panoramic image in just seconds. The
program does most of the work for you by automatically selecting an entire group of
pictures with one click, automatically organizing the photos into the proper order, then
seamlessly stitching the photos into a panoramic masterpiece that you can print, share
or post to the web. Create horizontal, vertical and 360° panorama pictures all within this
one amazing program.
To install software:
1. Insert the CD-ROM that came with the camera into your CD-ROM drive.
The welcome screen appears.
2. Click the respective software name.
Follow the on-screen instructions to complete the installation.
EN-22
Download from Www.Somanuals.com. All Manuals Search And Download.
Taking Images When the Smile Feature Is On
With the camera’s new “smile detection” function, this camera detects smiles so you
do not miss those special moments in life.
1. Slide the mode switch to [SCENE].
2. Select [Smile Detection] with the se / af buttons, and press the
3. Compose the image, and press the shutter button
down fully.
button.
SCN
4. Once the camera detects
a
smile, it will
automatically capture 3 images (by default, the flash
mode setting is set to ).
„
If the [Capture Md.] is set to [Single], the camera
will only capture an image after it detects a
smile.
When capturing group shots (if the number of
people is more than 1), the camera will
automatically capture the image(s) when it
detects two smiles.
„
„
„
If the camera does not detect a smile within 1 minute, the camera returns to
preview display.
Press the shutter button once again to reactivate this function.
EN-23
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording Shots into Multiple Image Layout
The Album Shot mode enables you to easily record images and combine three shots
into a single image.
1. Slide the mode switch to [ ].
2. Press the
button, and select the [Function] menu with the af button.
3. Select [Capture Md.] with the OZc / ed buttons, and press the
button.
button.
4. Select [Album Shot] with the OZc / ed buttons, and press the
5. Press the
button.
6. Press the shutter button to capture the first image.
7. Press the shutter button again to capture the second and third images.
„
The camera returns to normal preview display by pressing the ed button. Press
the ed button again to switch back to album shot preview display.
This shot can only be recorded if there are 3 shots recorded in each of the
available frames.
„
Recording Shots using Face Detection Technology
Face Detection Technology can identify and focus on the human faces in the image.
This advanced function simultaneously detects up to 10 human faces regardless of their
position in the scene.
1. Slide the mode switch to [ ].
2. Press the
button.
button, and select [ ] icon with the se / af buttons. Press the
„
With Face Detection turned on, the camera identifies main face (white frame)
and subsidiary faces (gray frames).
„
If the camera cannot detect and track any faces, there will be no frame shown on
the screen.
3. Press the shutter button halfway down to lock
the focus.
„
When the main face is in focus, the white
frame simultaneously turns green.
Otherwise, it turns red.
4. Press the shutter button down fully to capture
your image.
Focus lock
„
Subjects that are not suitable with this function:
a. A person is wearing glasses, sunglasses, or face is covered with hat or hair.
b. A person turns sideways.
EN-24
Download from Www.Somanuals.com. All Manuals Search And Download.
VIDEO MODE
Recording Video Clips
This mode allows you to record video clips at a resolution of 320 x 240 / 640 x 480
pixels.
1. Slide the mode switch to [ ].
2. Compose the image.
3. Press the shutter button.
„
„
The recording of the video clip will start.
Pressing the shutter button one more time will
end the recording of the video clip.
„
„
The recording time depends on the storage
size and the subject of the image to be
recorded.
The zoom function cannot be used during video recording.
„
„
When recording a video clip, the flash and "10+2 sec." self-timer function cannot be used.
If the write speed of your SD/SDHC memory card is not fast enough for recording video clips in
the!currently selected quality, the video recording will stop. In this case, select a video quality
lower than the current one.
Playing Back Video Clips
You can play back recorded video clips on the camera. You can also play back sound if
recorded with the video.
1. Press the
The last image appears on the screen.
2. Select the desired video clip with the se / af buttons.
button.
„
3. Press the
button.
„
„
„
A press of the af se buttons during playback allows fast forward play / fast
/
reverse play.
To stop video playback, press the ed button.
This stops playback and returns to the start of the video clip.
To pause video playback, press the
This pauses video playback.
button.
To cancel pause, press the
button again.
„
„
Video clips cannot be displayed rotated or enlarged.
Windows Media player or QuickTime Player is recommended to play back the video clip on your
computer.
„
„
and Windows computers.
For more information about the operation of the media player, refer to its respective help documentation.
EN-25
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYBACK MODE
Playing Back Still Images
You can play back the still images on the LCD monitor.
1. Press the
button.
„
The last image appears on the screen.
2. The images can be displayed in forward or
reverse sequence with the se / af buttons.
„
To view the previous image, press the se
button.
„
„
To view the next image, press the af button.
Turn the zoom lever to
image.
side enlarges the
„
To return to normal magnification, turn the
zoom lever to side.
„
„
An [
] icon is displayed with the video data. Video clips cannot be rotated.
An [ ] icon is displayed with images which have an audio memo recorded.
EN-26
Download from Www.Somanuals.com. All Manuals Search And Download.
Thumbnail Display
This function allows you to view 9 thumbnail images on the LCD monitor at the same
time, which can let you quickly search for the image that you want.
1. Press the
The last image appears on the screen.
2. Turn the zoom lever to side.
button.
„
„
„
The images are displayed in the thumbnail display.
Images that have been selected with the se /
af / OZc / ed buttons will be indicated by a
yellow frame.
„
When there are ten or more images, scroll the
screen with the OZc / ed buttons.
3. Press the se / af / OZc / ed buttons to
select the image to be displayed at regular size.
4. Press the
button.
„
The selected image is displayed at its regular size.
„
An [ ], [ ], [
] icon may be displayed in a thumbnail.
Removing Red-eye
You can use this function to remove the red-eye effect after an image is taken.
1. Press the
button.
„
The last image appears on the screen.
2. Select the image that you want to edit with the
se / af buttons.
3. Press the
button.
4. Select [Fix Red Eyes] with the OZc / ed
buttons, and press the button.
5. Select [Execute] with the OZc / ed buttons,
and press the button.
6. View the changes on the corrected image.
7. To save your corrected image, select [Confirm]
with the OZc / ed buttons, and press the
button.
„
When this process ends, this replaces the
original image with the corrected image.
!
EN-27
Download from Www.Somanuals.com. All Manuals Search And Download.
Attaching Voice Memos
A maximum of 30 seconds of audio can be recorded as a memo for captured still
images. The voice memo can be recorded only once.
1. Press the
button.
„
The last image appears on the screen.
2. Select the image to which you want to attach the voice memo with the se / af
buttons.
3. Press the
4. Select [Voice Memo] with the OOc / ed buttons, and press the
5. Select [On] with the OOc / ed buttons, and press the button.
button.
button.
6. Press the
7. Press the
button to exit from the menu.
button.
„
[VOICE RECORDING] is displayed on the screen and recording starts.
8. To stop recording a voice memo as it is being recorded, press the button again.
[VOICE RECORD END] will be displayed momentarily and the recording will
„
end. An [ ] icon is displayed with images that have been recorded with a voice
memo.
Playing back voice memo
A press of the
button displays [VOICE PLAYBACK]
a
x
and plays back the voice memo.
100- 0001
E
„
Voice memo is only available for still images.
EN-28
Download from Www.Somanuals.com. All Manuals Search And Download.
Protecting Images
Set the data to read-only to prevent images from being erased by mistake.
1. Press the
button.
„
The last image appears on the screen.
2. Select the image that you want to protect with the
se / af buttons.
3. Press the
button.
4. Select [Protect] with the OOc / ed buttons, and
press the button.
5. Select [Single] or [All] with the OOc / ed buttons,
and press button.
6. Select [Set] with the OOc / ed buttons, and press
the
button.
„
Protection is applied to the image and the camera
returns to the playback mode.
„
The protect icon
images.
[
]
is displayed with protected
When [All] has been selected, [ ] is displayed
with all the images.
Canceling the Protection
To cancel protection for only one image, display the
image on which you want to remove the image
protection.
1. Press the
The last image appears on the screen.
2. Select the image that you want to cancel protection with the se / af buttons.
3. Press the button.
4. Select [Protect] with the OOc / ed buttons, and press the
button.
„
button.
5. Select [Single] or [All] with the OOc / ed buttons, and press the
button.
button.
6. Select [Cancel Protect] with the OOc / ed buttons, and press the
„
The removal of image protection is executed and the camera returns to the
playback mode.
„
Formatting an SD/SDHC memory card overrides protection, and erases all images regardless of
their protected status.
EN-29
Download from Www.Somanuals.com. All Manuals Search And Download.
Erasing Images
Erasing a single image / Erasing all images
1. Press the
button.
„
The last image appears on the screen.
2. Select the image you want to erase with the
se / af buttons.
3. Press the
button.
4. Select [Single] or [All] with the OOc / ed
buttons, and press the button.
„
[Single]: Erases the selected image or the
last image.
„
[All]: Erases all of the images except for the
protected images.
5. Select [Execute] with the OOc / ed buttons,
and press the button.
To not erase, select [Cancel], and press the
button.
6. To exit from the menu, press the
„
button.
„
Deleting an image will not affect sequential image numbering. For example, if you delete image
number 240, the next captured image will be numbered 241 even though 240 no longer exists. In
other words, an image-number is retired when an image is deleted and will not be reused or
reassigned to another subsequently captured image.
EN-30
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU OPTIONS
Capture Menu
This menu is for the basic settings to be used when capturing still images.
Function
1. Press the ON/OFF button to turn the power on.
2. Slide the mode switch to [SCENE].
3. Press the
button, and select the [Capture] / [Function] menu with the se /
af button
s.
4. Select the desired option item with the OZc / ed buttons, and press the
button to enter its respective menu.
„
The selectable items may vary in different capture modes.
5. Select the desired setting with the OZc / ed buttons, and press the
button.
6. To exit from the menu, press the
button.
Size
This sets the size of the image that will be captured.
* [
* [
* [
* [
* [
] 3968 x 2976
] 3264 x 2448
] 2304 x 1728
] 1600 x 1200
] 640 x 480
ISO
This sets the sensitivity for capturing images. When the sensitivity is raised (and the
ISO figure is increased), photography will become possible even in dark locations, but
the more pixelated (grainier) the image will appear.
* [Blank] Auto
* [
* [
* [
* [
* [
] ISO 100
] ISO 200
] ISO 400
] ISO 800
] ISO 1600
EN-31
Download from Www.Somanuals.com. All Manuals Search And Download.
Quality
This sets the quality (compression) at which the image is captured.
* [
* [
* [
] Fine
] Standard
] Economy
W. Balance
This sets the white balance for a variety of lighting conditions and permits images to be
captured that approach the conditions that are seen by the human eye.
* [Blank] Auto
* [
* [
* [
* [
* [
* [
] Incand.
] Fluoresc.1
] Fluoresc.2
] Daylight
] Cloudy
] Manual WB
Sharpness
This sets the sharpness of the image that will be captured.
* Hard / Standard / Soft
Color
This sets the color of the image that will be captured.
* Standard / Vivid / Sepia / B&W / Blue / Red / Green / Yellow / Purple
Saturation
This sets the saturation of the image that will be captured.
* High / Standard / Low
Metering
This sets the metering method for calculating the exposure.
* Center:
* Spot:
Averages the light metered from the entire frame, but gives greater
weight to the subject matter at the center.
A very small portion of the center of the screen is measured to calculate
the correct exposure.
* Average: The exposure is measured all of the image area.
EN-32
Download from Www.Somanuals.com. All Manuals Search And Download.
Capture Md.
This sets the recording method at the time of capturing images.
* [Blank] Single:
Captures one image at a time.
* [
* [
] Continuous:
Permits continuous capture of up to 3 images.
] AEB:
Permits 3 consecutive images in the order of standard exposure,
underexposure and overexposure compensation.
* [
* [
] Album Shot:
] Burst:
Creates an album-like layout to combine 3 shots into a single
image.
Permits continuous photography while pressing and holding the
shutter button. As long as you hold the shutter button pressed,
images are captured until the memory capacity is exhausted.
* [
* [
] Cont.flash:
Permits continuous capture of up to 3 images with flash.
Lets you capture the background first, then have someone to
capture you in front of it.
]
Pre-shot:
* [
] Coupl.shot:
Uses separate areas to combine two shots. You can include
yourself in the shot.
Quick Shot
If this function is set to “On”, the camera takes a quick shot without focusing.
* On / Off
Digi. Zoom
This sets whether or not to use digital zoom at the time of photography.
* On / Off
Date Print
The date of recording can be printed directly on the still images. This function must be
activated before the image is captured.
* On / Off
EN-33
Download from Www.Somanuals.com. All Manuals Search And Download.
Video Menu
This menu is for the basic settings to be used when recording video clips.
1. Slide the mode switch to [ ].
2. Press the
button, and select the [Capture] / [Function] menu with the se /
af buttons.
3. Select the desired option item with the OOc / ed buttons, and press the
button to enter its respective menu.
4. Select the desired setting with the OOc / ed buttons, and press the
button.
5. To exit from the menu, press the
button.
Size
This sets the size of the video clip that will be captured.
* [
* [
] 640 x 480
] 320 x 240
Quality
This sets the quality (compression) at which the video clip is captured.
* [
* [
] Fine
] Standard
Color
This sets the color of the video clip that will be captured.
* Standard / Vivid / Sepia / B&W / Blue / Red / Green / Yellow / Purple
Audio
This sets whether or not to record audio at the time of video recording.
* On / Off
Digi. Zoom
Refer to the section in this manual titled “Digi. Zoom” (page 33) in Capture Menu for
further details.
EN-34
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback Menu
In the [ ] mode, choose which settings are to be used for playback.
1. Press the
2. Press the
button
.
button.
3. Select the desired option item with the OOc / ed buttons, and press the
button to enter its respective menu.
4. Select the desired setting with the OOc / ed buttons, and press the
button.
5. To exit from the menu, press the
button.
Fix Red Eyes
Refer to the section in this manual titled “Removing Red-eye” (page 27) for further
details.
Slide Show
This function enables you to play back your still images automatically in order one image at a
time.
* 3 Sec. / 5 Sec. / 10 Sec.
Rotate
If you wish to rotate a still image 90 degrees to the right, select +90°; if you wish to
rotate it 90 degrees to the left, select -90°. Video clips cannot be rotated.
* +90° / -90°
Protect
Refer to the section in this manual titled “Protecting Images” (page 29) for further
details.
Voice Memo
Refer to the section in this manual titled “Attaching Voice Memos” (page 28) for further
details.
EN-35
Download from Www.Somanuals.com. All Manuals Search And Download.
Resize
Resizes a previously saved image. Resizing replaces the original image with the
changed image. It is only possible to resize to a smaller size.
Qual. Change
Changes the quality (compression) of a recorded image. Compress images down to half
of their size or less, overwrite old size images with newly compressed images. It is only
possible to reduce the image quality/size, never to increase it.
Copy to Card
Allows you to copy your files from the camera’s internal memory to an SD/SDHC
memory card. Of course, you can only do this if you have a memory card installed and
some files in internal memory. All files remain in the internal memory, even after copy to
the SD/SDHC memory card from the internal memory.
* Cancel / Execute
EN-36
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup Menu
Set your camera’s operating environment.
1. Slide the mode switch to [ ] or [ ]; or press the
button.
2. Press the
button, and select the [Setup] menu with the af button.
3. Select the desired option item with the OOc / ed buttons, and press the
button to enter its respective menu.
4. Select the desired setting with the OOc / ed buttons, and press the
button.
5. To exit from the menu, press the
button.
Date/Time
Refer to the section in this manual titled “Setting the Date and Time” (page 17) for
further details.
Language
Refer to the section in this manual titled “Choosing the Language” (page 18) for further
details.
Auto Off
If no operation is performed for a specific period of time, the power to the camera is
automatically turned off. This feature is useful for reducing battery usage.
* 1 Min. / 2 Min. / 3 Min. / Off
Beep
This sets whether or not to mute the camera sound each time you press the camera's
buttons.
* On / Off
Display
This sets the image information display state.
* Default / All / Off
Video Out
This sets your camera to match the system of the equipment that you are going to
connect to the camera.
* PAL / NTSC
EN-37
Download from Www.Somanuals.com. All Manuals Search And Download.
Fr. No. Reset
This creates a new folder. The captured images are recorded to the newly created
folder from number 0001.
* Cancel / Execute
Light Freq.
This camera supports different lighting frequencies: 50 Hz and 60 Hz. When
photographing under fluorescent lighting, select the correct frequency setting
depending in your local area's voltage.
* 50 Hz / 60 Hz
LCD Bright.
Select a brightness level for the LCD monitor. The LCD becomes brighter with the
OOc button and darker with the ed button. The adjustment range is from -5 to 5.
Format
Refer to section in this manual titled “Formatting the Memory Card or Internal Memory”
(page 18) for further details.
Media Info.
This displays the free capacity of the internal memory or the memory card.
Sys. Info.
This displays the firmware version of the camera.
Sys. Reset
This returns all basic settings to the camera’s default settings. The time setting will not be
reset.
* Cancel / Execute
EN-38
Download from Www.Somanuals.com. All Manuals Search And Download.
TRANSFERRING FILES TO YOUR
COMPUTER
System Requirement
Windows
Macintosh
„
„
„
„
„
„
Pentium III 800 or equivalent
„
„
„
„
„
„
PowerPC G3/G4/G5
Windows 2000/XP/Vista
256MB RAM (512MB recommended)
150MB available hard disk space
CD-ROM drive
OS 9.0 or later
256MB RAM (512 MB recommended)
128MB available hard disk space
CD-ROM drive
Available USB port
Available USB port
Downloading Your Files
1. Connect one end of the USB cable to an available
USB port on your computer.
2. Connect the other end of the USB cable to the
USB terminal on the camera.
3. Turn on your camera.
4. Select [PC] using the OOc / ed buttons and
press the
button.
5. From the Windows desktop, double click on “My
Computer”.
6. Look for a new “removable disk” icon.
„
This “removable disk” is actually the memory (or memory card) in your camera.
Typically, the camera will be assigned drive letter “e” or higher.
7. Double click on the removable disk and locate the DCIM folder.
8. Double click on the DCIM folder to open it to find more folders.
„
Your recorded images and video clips will be inside these folders.
9. Copy & Paste or Drag-N-Drop image and video files to a folder on your computer.
Mac users: Double-click the “untitled” or “unlabeled” disk drive icon on your desktop.
iPhoto may automatically launch.
EN-39
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE CAMERA AS A PC CAMERA
Your camera can act as a PC camera, which allows you to videoconference with busi-
ness associates, or have a real-time conversation with friends or family. To use the cam-
era for videoconferencing, your computer system must include the items as below:
„
„
„
„
Microphone
Sound card
Speakers or headphones
Network or Internet connection
Install the PC camera driver
The PC-camera driver included in the CD-ROM is exclusively for Windows. The PC
camera function is not supported for Mac platforms.
1. Insert the enclosed CD-ROM into your CD-ROM drive.
2. Follow the on-screen instructions to complete the installation.
3. After the driver installation is completed, restart your computer.
„
Make sure to install and launch a videoconferencing application software to activate the
PC-camera function.
EN-40
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING SOFTWARE INSTALLATION
There are 2 types of software that are included on the CD-ROM:
MediaOne Gallery SE - makes it the easiest way to manage and share your digital life
with family & friends. The intuitive thumbnail library automatically organizes, updates
and sorts files for the most natural way to browse your multimedia collection.
®
®
Arcsoft Panorama Maker 4.0 - Like magic, ArcSoft Panorama Maker 4 turns any
series of overlapping photos into a gorgeous panoramic image in just seconds. The
program does most of the work for you by automatically selecting an entire group of
pictures with one click, automatically organizing the photos into the proper order, then
seamlessly stitching the photos into a panoramic masterpiece that you can print, share
or post to the web. Create horizontal, vertical and 360° panorama pictures all within this
one amazing program.
To install software:
1. Insert the CD-ROM that came with the camera into your CD-ROM drive.
The welcome screen appears.
2. Click the respective software name.
Follow the on-screen instructions to complete the installation.
„
„
For more information about the operation of the software, refer to its respective help documentation.
For Windows 2000/XP/Vista users, please make sure to install and use the software in
“Administrator” mode.
„
The software is not supported by Mac.
EN-41
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
Item
Description
Image sensor
1/2.33” CCD sensor (12.0 megapixels)
Still image
3968 x 2976, 3264 x 2448, 2304 x 1728, 1600 x 1200, 640 x 480
Video clip
640 x 480 (30 fps), 320 x 240 (30 fps)
Image resolution
LCD monitor
Recording media
File format
2.8” full color TFT LCD (230K pixels)
32MB internal memory (26MB available for image storage)
Supports SD/SDHC memory card (up to 8GB) (optional)
DCF, JPEG (EXIF 2.2), Motion-JPEG (AVI)
4x optical zoom lens
Aperture range: 2.5(W) - 5.6(T)
Focal length: 5.8mm - 23.2mm (equivalent to 33mm - 132mm on a
35mm camera)
Lens
Standard
Wide: 0.3m to infinity
Tele: 0.5m to infinity
Macro
Focus Range
0.05m to infinity
Shutter speed
Sensitivity
1 - 1/2000 sec.
Still image
Auto (ISO 100-200)
Manual (ISO 100/200/400/800/1600)
* Sensitivity is measured in compliance with the ISO standard
(ISO12232:2006).
6x (Capture mode)
4x (Playback mode)
Digital zoom
0.5m - 2.7m (Wide)
0.5m - 1.5m (Tele)
Flash effective range
AV OUT
USB 2.0 compliant
(2 in 1 terminal)
Terminals
Power supply
Rechargeable Lithium-ion battery (3.7V)
Operating
environment
Temperature: 0°C - 40°C (32°F to 104°F)
Humidity: 10% - 85% (Non-condensing)
Dimensions
Weight
Approx. 97 x 23.2 x 57.53 mm (without protruding parts)
Approx. 124g (without battery and memory card)
* Design and specifications are subject to change without notice.
EN-42
Download from Www.Somanuals.com. All Manuals Search And Download.
APPENDIX
Possible Number of Shots
Possible number of shots (still image)
The table shows the approximate shots that you can capture at each setting based on
the capacity of the internal memory and the SD/SDHC memory card.
SD/SDHC memory card capacity
Internal
Size
Quality
4GB
8GB
SDHC
Memory
128MB
256MB
512MB
1GB
2GB
SDHC
Fine
3
9
11
19
46
54
27
62
40
94
109
55
81
189
220
112
163
380
441
226
507
605
662
859
922
1462
1608
1822
328
762
884
657
1525
1770
907
2034
2427
2655
3445
3695
1320
3062
3552
1821
4082
4871
5328
6913
7416
Standard
!Economy
Fine
Standard
!Economy
Fine
Standard
!Economy
Fine
Standard
!Economy
Fine
3968 x 2976
3264 x 2448
5
453
13
15
17
22
24
39
43
48
136
141
163
126
150
164
213
229
363
400
453
1262
1305
1508
253
302
330
429
460
730
803
910
2532
2619
3025
1016
1212
1326
1721
1846
2927
3219
3649
74
81
106
113
180
198
225
628
649
750
2304 x 1728
1600 x 1200
640 x 480
5859 11757
6444 12931
7302 14654
5070 10149 20311 40757
5245 10499 21011 42161
6059 12128 24270 48701
Standard
!Economy
Possible recording time / sec (video clip)
SD/SDHC memory card capacity
Internal
Memory
Size
Quality
4GB
SDHC
8GB
SDHC
128MB
256MB
512MB
1GB
2GB
Fine
00:00:22 00:01:43 00:03:28 00:06:57 00:13:55 00:27:52 00:55:47 01:51:57
640 x 480
320 x 240
Standard 00:00:27 00:02:07 00:04:16 00:08:35 00:17:11 00:34:24 01:08:51 02:18:10
Fine 00:01:17 00:05:58 00:12:00 00:24:05 00:48:14 01:36:33 03:13:14 06:27:47
Standard 00:01:33 00:07:08 00:14:22 00:28:49 00:57:43 01:55:32 03:51:13 07:43:59
* We recommend a memory card of at least 10MB/Sec write speed to prevent auto stop or
unexpected results. If you experience an error using a slower SD/SDHC memory card, you
can set your camera’s video recording to QVGA (320 x 240) and standard quality.
EN-43
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Refer to the symptoms and solutions listed below before sending the camera for repairs.
If the problem persists, contact your local reseller or service center.
Symptom
Cause
Solutions / Corrective Actions
Insert the battery correctly.
Recharge the battery.
The power does not come The battery is not inserted.
on.
The battery is exhausted.
The battery runs out quickly. The battery is not fully charged. Fully charge the battery and
The battery is not used for an
extended period of time after
being charged.
discharge it for at least one
complete cycle before use to
maximize its performance and
lifetime.
The battery or camera feels Long period of continuous use of
warm.
the camera or the flash.
Even if press the shutter
button, the camera does not
take a picture.
The shutter button is not pressed Press the shutter button all the
all the way down.
way down.
The memory card does not have Insert
a
new memory card, or
delete unwanted files.
any free capacity.
The memory card is
write-protected.
Remove the write-protection.
Images do not appear on LCD monitor is dark.
the LCD monitor.
Adjust the brightness of the
LCD monitor in the menu.
Although it is set to auto The lens is dirty.
focus, it does not focus.
Wipe clean with a soft, dry cloth
or lens paper.
The distance to the subject is
smaller than the effective range.
Get your subject within the effective
focus range.
The contents on the You played back a memory card
Insert a memory card that was
formatted on this camera.
memory card cannot be
played back.
that was not formatted by this
camera
.
Files cannot be deleted.
The file is protected.
Cancel protection.
The memory card is
write-protected.
Remove the write-protection.
Even when the camera’s
buttons are pressed, it does
not operate.
The battery is running low.
Recharge the battery.
The date and time are
wrong.
The correct date and time is not
set.
Set the correct date and time.
Cannot download images. The free space on the hard disk Check whether the hard disk has
in your computer may be
insufficient.
space for running Windows, and
if the drive for loading image files
has a capacity at least that of the
memory card inserted in the camera.
No power supply.
Recharge the battery.
EN-44
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to a PictBridge Compliant Printer
If a printer that supports PictBridge is available, images can be printed by connecting the
digital still camera directly to the PictBridge-compatible printer without using a computer.
Connecting the camera to the printer
1. Connect one end of the USB cable to your
camera.
2. Connect the other end of the USB cable to the
USB port on the printer.
3. Turn on your camera.
4. The [USB] screen is displayed. Select
[PictBridge] with the OOc / ed buttons, and
press the
button.
Printing images
When the camera is properly connected to a PictBridge compliant printer, the PictBridge
menu is displayed on the monitor.
1. Select the item you want to configure with the
OOc / ed buttons, and press the
button.
„
„
„
[Images]:Select whether you want to print
specific image or all images. You may also
select the printing number for a specific image.
[Date Print]:According to the printer type,
select whether you want to print the image
with date imprint or not.
[Paper Size]:Select the desired paper size
according to the printer type.
„
„
[Layout]:Select the desired printing layout according to the printer type.
[Print]:After all settings are configured, select this item to start printing.
2. If you select [Images] in the previous step, the
figure shown on the right hand side will appear.
Select [Single] or [All] with the OOc / ed
buttons, and press the
button.
„
„
„
[Single]:Select to print one specific image.
[All]:Select to print all images.
[Exit]:Exit from Images option.
EN-45
Download from Www.Somanuals.com. All Manuals Search And Download.
3. If you select [Single] in the previous step, the
figure shown on the right hand side will appear.
„
„
„
Select the image that you want to print with
the se / af buttons.
Select the [Print Num.] (up to 99) with the
OOc / ed buttons.
After selecting the desired image and printing
number, press the
button to confirm.
4. Select [Exit] with the OOc / ed buttons, and
press the button.
5. Select [Print] with the OOc / ed buttons,
and press the button to start printing.
6. The printing starts and the figure shown on the
right hand side appears.
„
[COMPLETE] will be displayed temporarily,
reminding you that the printing procedure is
finished.
If an error is detected during the connection
(i.e. a printer hardware problem) between
camera and printer, [PRINT ERROR] will be
displayed.
If an error is detected during the
communication (i.e. wrong setting on the camera) between camera and printer,
[ERROR] will be displayed.
„
„
„
The image printing may fail if the power to the camera is cut off.
EN-46
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|