Sanyo DVD Recorder DRW 500 User Guide
INSTRUCTION MANUAL  
DVD Video Recorder  
DRW-500  
REMOTE CONTROLLER RB-DRW500  
®
TM  
TM  
SANYO’S HELP-LINE  
Call the toll-free number below if you have any difficulties operating this product.  
1-800-813-3435 (Weekdays: 7:30 AM - 4:00 PM Central Time)  
Please Read This Manual.  
We recommend that you read this manual carefully before connecting your DVD Video Recorder and operating it for  
the first time.  
Keep the manual in a safe place for future reference.  
English  
1AD6P1P2047--A DRW-500, Issue Number 2  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Thissymbolindicatesthatdangerousvoltage  
constitutingariskofelectricshockispresent  
within this unit.  
CAUTION  
RISK OF ELECTRIC SHOCK  
DO NOT OPEN  
CAUTION: TO PREVENT THE RISK OF ELECTRIC  
SHOCK, DO NOT REMOVE COVER (OR BACK).  
NO USER-SERVICEABLE PARTS INSIDE.  
This symbol indicates that there are impor-  
tant operating and maintenance instructions  
in the literature accompanying this unit.  
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.  
WARNING: UNAUTHORIZED RECORDING OF COPY-  
RIGHTED MATERIAL MAY VIOLATE APPLICABLE  
COPYRIGHT LAWS. THE MANUFACTURER ASSUMES  
NO RESPONSIBILITY FOR UNAUTHORIZED DUPLICA-  
TION, USE OR OTHER ACTS WHICH INFRINGE UPON  
THE RIGHTS OF COPYRIGHT OWNERS.  
WARNING:TOPREVENTFIREORSHOCKHAZARD,  
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR  
MOISTURE.  
IMPORTANT SAFETY INSTRUCTIONS  
1. Read Instructions – All the safety and operating instructions  
should be read before the product is operated.  
10. Ventilation – Slots and openings in the cabinet are provided  
for ventilation and to ensure reliable operation of the product and  
to protect it from overheating, and these openings must not be  
blocked or covered. The openings should never be blocked by  
placing the product on a bed, sofa, rug, or other similar surface.  
This product should not be placed in a built-in installation such as  
a bookcase or rack unless proper ventilation is provided or the  
manufacturer’s instructions have been adhered to.  
2. Retain Instructions – The safety and operating instructions  
should be retained for future reference.  
3. Heed Warnings – All warnings on the product and in the  
operating instructions should be adhered to.  
4. Follow Instructions – All operating and use instructions should  
be followed.  
11. Power Sources – This product should be operated only  
from the type of power source indicated on the marking label. If  
you are not sure of the type of power supply to your home,  
consult your product dealer or local power company. For products  
intended to operate from battery power, or other sources, refer to  
the operating instructions.  
5. Cleaning – Unplug this product from the wall outlet before  
cleaning. Do not use liquid cleaners or aerosol cleaners. Use a  
damp cloth for cleaning.  
6. Attachments – Do not use attachments not recommended by  
the product manufacturer as they may cause hazards.  
12. Grounding or Polarization – This product may be equipped  
with a polarized alternating-current line plug (a plug having one  
blade wider than the other). This plug will fit into the power outlet  
only one way. This is a safety feature. If you are unable to insert  
the plug fully into the outlet, try reversing the plug. If the plug  
should still fail to fit, contact your electrician to replace your  
obsolete outlet. Do not defeat the safety purpose of the polarized  
plug.  
7. Water and Moisture – Do not use this product near water –  
for example, near a bath tub, wash bowl, kitchen sink, or laundry  
tub; in a wet basement; or near a swimming pool; and the like.  
8. Accessories – Do not place this product on an unstable cart,  
stand, tripod, bracket, or table. The product may fall, causing  
serious injury to a child or adult, and serious damage to the  
product. Use only with a cart, stand, tripod bracket, or table  
recommended by the manufacturer, or sold with the product.  
Any mounting of the product should follow the manufacturer’s  
instructions, and should use a mounting accessory recommended  
by the manufacturer.  
13. Power-Cord Protection – Power-supply cords should be  
routed so that they are not likely to be walked on or pinched by  
items placed upon or against them, playing particular attention to  
cords at plugs, convenience receptacles, and the point where  
they exit from the product.  
14. Lightning – For added protection for this product during a  
lightning storm, or when it is left unattended and unused for long  
periods of time, unplug it from the wall outlet and disconnect the  
antenna or cable system. This will prevent damage to the product  
due to lightning and power-line surges.  
PORTABLE CART WARNING  
(Symbol provided by RETAC)  
9. A product and cart combination  
should be moved with care. Quick stops,  
excessive force, and uneven surfaces  
may cause the product and cart  
combination to overturn.  
S3125A  
(Figure 1)  
-E2-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
15. Outdoor Antenna Grounding – If an outside antenna or  
cable system is connected to the product, be sure the antenna or  
cable system is grounded so as to provide some protection  
against voltage surges and built-up static charges. Article 810 of  
the National Electrical Code, ANSI/NFPA 70, provides information  
with regard to proper grounding of the mast and supporting  
structure, grounding of the lead-in wire to an antenna discharge  
unit, size of grounding conductors, location of antenna-discharge  
unit, connection to grounding electrodes, and requirements for  
the grounding electrode. See Figure 2.  
18. Object and Liquid Entry – Never push objects of any kind  
into this product through openings as they may touch dangerous  
voltage points or short-out parts that could result in a fire or  
electric shock. Never spill liquid of any kind on the product.  
19. Servicing – Do not attempt to service this product yourself  
as opening or removing covers may expose you to dangerous  
voltage or other hazards. Refer all servicing to qualified service  
personnel.  
20. Damage Requiring Service – Unplug this product from the  
wall outlet and refer servicing to qualified service personnel  
under the following conditions:  
EXAMPLE OF ANTENNA GROUNDING AS PER  
NATIONAL ELECTRICAL CODE, ANSI/NFPA 70  
a. When the power-supply cord or plug is damaged.  
b. If liquid has been spilled, or objects have fallen into the  
product.  
ANTENNA  
c. If the product has been exposed to rain or water.  
d. If the product does not operate normally by following the  
operating instructions. Adjust only those controls that are  
covered by the operating instructions as an improper  
adjustment of other controls may result in damage and will  
often require extensive work by a qualified technician to  
restore the product to its normal operation.  
e. If the product has been dropped or damaged in any way.  
f. When the product exhibits a distinct change in  
performance – this indicates a need for service.  
LEAD IN  
GROUND  
WIRE  
CLAMP  
ANTENNA  
DISCHARGE UNIT  
(NEC SECTION 810 - 20)  
ELECTRIC  
SERVICE  
GROUNDING CONDUCTORS  
(NEC SECTION 810 - 21)  
GROUND CLAMPS  
EQUIPMENT  
POWER SERVICE GROUNDING  
ELECTRODE SYSTEM  
21. Replacement Parts – When replacement parts are required,  
be sure the service technician has used replacement parts  
specified by the manufacturer or have the same characteristics  
as the original part. Unauthorized substitutions may result in fire,  
electric shock, or other hazards.  
(NEC ART 250, PART H)  
NEC – NATIONAL ELECTRICAL CODE  
(Figure 2)  
S2898A  
22. Safety Check – Upon completion of any service or repairs to  
this product, ask the service technician to perform safety checks  
to determine that the product is in proper operating condition.  
16. Power Lines – An outside antenna system should not be  
located in the vicinity of overhead power lines or other electric  
light or power circuits, or where it can fall into such power lines or  
circuits. When installing an outside antenna system, extreme  
care should be taken to keep from touching such power lines or  
circuits as contact with them might be fatal.  
23. Heat – The product should be situated away from heat  
sources such as radiators, heat registers, stoves, or other products  
(including amplifiers) that produce heat.  
17. Overloading – Do not overload wall outlets, extension cords,  
or integral convenience receptacles as this can result in a risk of  
fire or electric shock.  
-E3-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SAFETY CERTIFICATION  
Note:  
This unit is made and tested to meet exacting safety  
standards. It meets UL and FCC requirements and com-  
plieswithsafetyperformancestandardsoftheU.S.Depart-  
ment of Health and Human Services.  
This equipment has been tested and found to comply with the  
limits for a Class B digital device, pursuant to Part 15 of the FCC  
Rules. These limits are designed to provide reasonable protection  
against harmful interference in a residential installation. This  
equipment generates, uses and can radiate radio frequency  
energy and, if not installed and used in accordance with the  
instructions, may cause harmful interference to radio  
communications. However, there is no guarantee that interference  
will not occur in a particular installation. If this equipment does  
cause harmful interference to radio or television reception, which  
can be determined by turning the equipment off and on, the user  
is encouraged to try to correct the interference by one or more of  
the following measures:  
CAUTION - USE OF CONTROLS OR ADJUSTMENTS  
OR PERFORMANCE OF PROCEDURES OTHER THAN  
THOSESPECIFIEDHEREINMAYRESULTINHAZARD-  
OUS RADIATION EXPOSURE.  
THISUNITSHOULDNOTBEADJUSTEDORREPAIRED  
BY ANYONE EXCEPT PROPERLY QUALIFIED SER-  
VICE PERSONNEL.  
•
•
•
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different  
from that to which the receiver is connected.  
Consult the dealer or an experienced radio/TV technician for  
help.  
FCC INFORMATION  
•
This device complies with Part 15 of the FCC Rules.  
Operation is subject to the following two conditions:  
(1) This device may not cause harmful interference, and (2) this  
device must accept any interference received, including  
interference that may cause undesired operation.  
THIS CLASS B DIGITAL APPARATUS COMPLIES WITH  
CANADIAN ICES-003.  
CET APPAREIL NUMÉRIQUE DE CLASSE B EST  
CONFORME AUX EXIGENCES DU RÉGLEMENT  
CANADIEN ICES-003.  
CAUTION:  
Changes or modifications not expressly approved by Sanyo may  
void the user's authority to operate this equipment.  
ACCESSORIES  
Audio/Video cable  
RB-DRW500 wireless remote control  
75-ohm coaxial antenna cable  
REMOTE CONTROLLER RB-DRW500  
AA size battery (manganese)  
Quantity: 1 pair  
-E4-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTROLS  
Front Panel  
1
2
3
4
5
6
7
8 9  
12 11  
10  
1. Power button (POWER)  
2. Disc tray  
9. Play button (a)  
10. 2nd AV input jacks (AV2 IN)  
3. Open/Close button (q OPEN/CLOSE)  
4. FL display  
S-video input jack (S-VIDEO)  
Video input jack (VIDEO)  
5. Record mode button (REC MODE)  
6. TV channel scanning button (- CHANNEL +)  
7. Skip/Next/Previous buttons (f , e)  
8. Stop button (n)  
Audio input jacks (L-AUDIO-R)  
11. Record button and indicator (m REC)  
12. Remote sensor (IR)  
FL Display  
1
23 4  
5
6
7
8
9
10  
11  
RW TITLE  
CH  
CHP SHUFF PROG  
REP 1 ALL A-B  
REC HQ SP LP EP  
+
DIGITAL  
ST  
s
19  
SAP  
TV  
12  
CD  
18  
16  
15  
14  
17  
13  
1. DVD indicator (DVD)  
2. DVD rewritable indicator (RW)  
3. Play indicator (a)  
4. Title indicator (TITLE)  
5. Channel indicator (CH)  
6. Chapter indicator (CHP)  
7. Shuffle indicator (SHUFF)  
8. Program indicator (PROG)  
11. Record mode indicators (HQ, SP, LP, EP, +)  
12. TV indicator (TV)  
13. Second Audio Program indicator (SAP)  
14. Timer indicator (0)  
15. Message or number indicators  
(Title, chapter, track, playing time or other information)  
16. Pause indicator (k)  
17. CD indicator (CD)  
9. Repeat indicators (REP1, ALL, A-B)  
10. Record indicator (REC)  
18. Stereo indictor (ST)  
19. Dolby Digital indicator (s DIGITAL)  
Back Panel  
1
2 3  
4
5
6
AV 1 IN  
L
OUT  
VIDEO  
VIDEO  
3
4
L
ANTENNA  
COMPONENT VIDEO OUT  
R
R
IN  
OUT  
S-VIDEO  
AUDIO  
DIGITAL  
AUDIO  
AUDIO  
S-VIDEO  
1. VHF/UHF antenna input jack (ANTENNA IN)  
2. VHF/UHF antenna output jack (ANTENNA OUT)  
3. RF output channel switch (RF OUTPUT CHANNEL)  
4. 1st AV input jacks (AV1 IN)  
5. Component video output jacks (COMPONENT VIDEO OUT)  
6. AV output jacks (OUT)  
Video output jack (VIDEO)  
S-video output jack (S-VIDEO)  
Video input jack (VIDEO)  
S-video input jack (S-VIDEO)  
Coaxial digital audio output and Optical digital audio output  
jacks (DIGITAL AUDIO)  
Audio input jacks (L/R AUDIO)  
Audio output jacks (L/R AUDIO)  
-E5-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
REMOTE CONTROL  
1. Open/Close button (OPEN/CLOSE)  
2. Angle button (ANGLE)  
3. TV/DVD select button (TV/DVD)  
4. Power button (POWER)  
1
2
3
5. Shuffle button (SHUFFLE)  
6. Input select button (INPUT)  
7. Menu button (MENU)  
8. Top menu button (TOP MENU)  
9. Audio button (AUDIO)  
4
35  
5
34  
33  
6
7
8
9
10  
11  
12  
13  
14  
15  
10. Directional arrow buttons (o, a, p, b)  
11. Enter button (ENTER)  
12. Pause button (k)  
13. Stop button (n)  
14. Play button (a)  
15. Fast forward/Fast reverse buttons (d, c)  
16. Search mode button (SEARCH MODE)  
17. Return button (RETURN)  
18. Display button (DISPLAY)  
19. Muting button (MUTE)  
32  
31  
30  
29  
20. TV button (TV)  
16  
17  
28  
27  
21. TV channel scanning buttons (- CHANNEL +)  
22. Record mode button (REC MODE)  
23. Record button (m RECORD)  
24. Clear button (CLEAR)  
25. Edit button (EDIT)  
26. Number buttons (1 – 9, 0, +10)  
27. Clock button (CLOCK)  
26  
18  
19  
20  
25  
24  
28. Zoom button (ZOOM)  
29. Skip/Next/Previous buttons (f, e)  
30. Slow motion playback button (Ia)  
31. Program button (PROG)  
32. Subtitle button (SUBTITLE)  
33. Setup button (SETUP)  
23  
22  
21  
34. A-B repeat button (A-B)  
35. Repeat button (REPEAT)  
Two "AA" batteries  
Inserting batteries  
1
Remote control range  
(supplied)  
2
Remote sensor  
Within approx. 20 feet  
(6 meters)  
30°  
30°  
Note:  
Remove the batteries if the remote control is not to be used for a  
month or more. Batteries left in the unit may leak and cause  
damage.  
IMPORTANT NOTE:  
SPENT OR DISCHARGED BATTERIES MUST BE  
RECYCLED OR DISPOSED OF PROPERLY IN COMPLIANCE  
WITH ALL APPLICABLE LAWS.  
Note:  
This is not Multi-brand Remote Control.  
It cannot operate your TV and VCR.  
FOR DETAILED INFORMATION, CONTACT YOUR LOCAL  
COUNTY SOLID WASTE AUTHORITY.  
-E6-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FOR SAFE AND EFFICIENT OPERATION  
•
•
Do not damage the power cord.  
CAUTION:  
When not in use, disconnect the power cord from the outlet.  
Grasp the plug, not the cord, when disconnecting the unit.  
If water should enter the unit, electrical shock or a malfunction  
may result. Use in an area where there is low humidity and  
little dust.  
Do not disassemble or alter the unit in any way.  
Do not use the unit in areas where extremes in temperature  
occur (below 40°F (5°C) or exceeding 95°F (35°C)), or where  
it may be exposed to direct sunlight.  
The unit must be operated in a horizontal position only.  
The unit must be placed in a well ventilated area.  
Do not place any object on the top of the unit.  
Do not block ventilation holes.  
The cabinet of the unit warms up when it is used for a long time,  
however it is not a malfunction.  
•
•
•
Press [q OPEN/CLOSE] (or [OPEN/CLOSE] on the remote  
•
•
•
•
Because of the DVD recorder extremely low noise and wide  
dynamic range, there is a tendency to set the volume on the  
amplifier higher than necessary. Doing so may produce an  
excessively high output from the amplifier which can cause  
damage to your speakers. Please be careful in this regard.  
Sudden changes in the surrounding temperature can cause  
dew to form on the optical pickup lens inside the unit. Under  
this condition the unit may be unable to operate properly. If  
this should occur, remove the disc and allow the unit to adjust  
to the surrounding temperature.  
When carrying the unit, be sure to remove a disc which  
may be inside and turn the power off. Then unplug the  
power cord from the AC outlet after 10 seconds. Carrying  
the unit with a disc inside may damage the disc and/or  
the unit.  
control) when closing the disc tray. Do not push the disc tray.  
To reduce the volume temporarily (muting)  
Press [MUTE] on the remote control. “MUTE” appears on the  
TV screen.  
To restore the previous volume setting, press [MUTE] again.  
“MUTE OFF” appears briefly on the TV screen.  
WHAT TO DO IF...  
If the operation of the unit or display is not normal, even  
though the appropriate buttons have been pressed.  
1. Disconnect the power cord.  
2. Connect the power cord again.  
3. Operate the unit again.  
Do not install this equipment in a confined space, such as a  
book case or built in cabinet.  
Note:  
If the unit still does not operate correctly, please contact your  
nearest Sanyo Authorized Service Facility.  
Need help? Call  
1-800-813-3435  
-E7-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC CONNECTION  
Notes:  
•
Unpack the unit and insert the two AA size batteries in the  
remote control (See page E6).  
Need help? Call  
1-800-813-3435  
•
Do not connect the power cord to a 120VAC 60Hz outlet  
until all connections have been made.  
Before Connection  
This guide will help you to connect the unit.  
Step 1: Connecting the Antenna Cable (See page E8.)  
Step 2: Connecting the Video Cables (See page E11.)  
Step 3: Connecting the Audio Cables (See page E12.)  
Step 4: Connecting the Power Cord (See page E14.)  
Step 1: Connecting the Antenna Cable  
First, select one of the following antenna connections that best suit you.  
If you use  
See  
Antenna only (no cable TV), or cable without cable box  
Cable box with a few or many scrambled channels  
Example: Basic Antenna/Cable connections (Page E9)  
Example: Connecting a Cable Box (Page E10)  
CAUTION:  
Note to CATV system installer:  
Do not connect the antenna and VCR as shown below. Your  
VCR doesn’t work.  
This reminder is provided to call the CATV system installer’s  
attention to Section 820-40 of the NEC which provides guidelines  
for proper grounding and, in particular, specifies that the cable  
ground shall be connected to the grounding system of the  
building, as close to the point of cable entry as practical.  
Notes:  
•
•
•
If the antenna is a flat cable (300-ohm twin lead cable), use a  
300-75 ohm matching transformer (not supplied) to connect  
the antenna to the unit.  
If you use separate VHF and UHF antenna cables, use a  
VHF/UHF band combiner (not supplied) to connect the  
antenna to the unit.  
VCR  
DVD recorder  
TV  
If you are not sure about the connection, please consult your  
audio/video dealer.  
DVD recorder  
VCR  
TV  
-E8-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Example: Basic Antenna/Cable Connections  
3
4
2
DVD recorder  
(Partial back panel)  
AV 1 IN  
L
VIDEO  
3
4
1
ANTENNA  
VHF/UHF  
ANTENNA  
IN  
or  
R
IN  
OUT  
S-VIDEO  
AUDIO  
75-ohm coaxial  
TV  
antenna cable  
(not supplied)  
3
Cable TV wall jack  
75-ohm coaxial antenna cable (supplied)  
1. Connect an antenna (or a cable TV system) to the unit.  
2. Set the RF OUTPUT CHANNEL switch to “3” or “4”.  
3. Connect the unit to the TV with the 75-ohm coaxial antenna  
cable (supplied).  
Channel Switch Setting  
Set your TV to either channel 3 or channel 4. (Choose a  
channel that is not used for broadcasting in your area.)  
Then set the RF OUTPUT CHANNEL switch to channel 3 or 4  
to match the channel selected on the TV. This is your unit  
channel.  
The TV must be set to this channel whenever the unit is used  
for playing a disc or watching a TV program.  
If in doubt, check with your local cable company.  
Need help? Call  
1-800-813-3435  
-E9-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Example: Connecting a Cable Box  
This unit can receive all unscrambled cable channels without the use of a cable box. If you wish to view and record scrambled cable  
channels, you must connect a cable box as described below.  
Your local cable TV company will advise you of the channels available in your area.  
We recommend that you consult your cable TV company to make sure that the cable is properly connected.  
Example:  
Example:  
Connecting a cable box with many scrambled channels  
Use this connection if your cable system scrambles all or most  
channels.  
Connecting a cable box with only a few scrambled channels  
Use this connection if your cable system scrambles only a few  
channels.  
Connect the cable box to the unit first.  
Connect the cable box between the unit and the TV.  
Notes:  
Notes:  
•
The unit and TV receive the same channel. Be sure that the  
•
You can record any non-scrambled channel by selecting the  
cable box is turned on.  
channel on the unit.  
•
Recording one channel while watching another channel is  
not possible.  
•
You cannot record scrambled channels that require a cable  
box.  
DVD recorder  
(Partial back panel)  
Cable box (not supplied)  
AV 1 IN  
VIDEO  
3
4
L
ANTENNA  
CATV  
75-ohm coaxial antenna  
cable (not supplied)  
R
IN  
OUT  
CATV  
S-VIDEO  
AUDIO  
75-ohm coaxial  
antenna cable  
(not supplied)  
75-ohm coaxial antenna  
cable (supplied)  
DVD recorder  
(Partial back panel)  
Cable box (not supplied)  
AV 1 IN  
VIDEO  
3
4
L
ANTENNA  
R
IN  
OUT  
S-VIDEO  
AUDIO  
TO TV  
ANT. IN  
VHF/UHF  
ANTENNA  
IN  
VHF/UHF  
ANTENNA  
IN  
TV  
TV  
75-ohm coaxial antenna cable (not supplied)  
75-ohm coaxial antenna cable (supplied)  
Need help? Call  
1-800-813-3435  
-E10-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Step 2: Connecting the Video Cable  
Connect the unit to your TV.  
Select one of the following examples.  
(If the TV has an antenna input jack only, skip this step.)  
Note:  
Need help? Call  
1-800-813-3435  
For AUDIO connection, see page E12.  
Example:  
Connecting to the VIDEO OUT jack  
Connect the yellow plug of the Audio/Video cable to the video (yellow) jack.  
You can enjoy standard picture images.  
Note:  
Connect the right (red) and left (white) plugs of the Audio/Video cable to the audio input jacks (see page E12).  
AV 1 IN  
L
OUT  
VIDEO  
VIDEO  
3
4
L
AUDIO  
VIDEO  
INPUT  
1
R-AUDIO-L VIDEO  
ANTENNA  
COMPONENT VIDEO OUT  
R
R
IN  
OUT  
S-VIDEO  
AUDIO  
DIGITAL  
AUDIO  
AUDIO  
S-VIDEO  
DVD recorder (Partial back panel)  
TV  
(Yellow)  
To VIDEO OUT jack  
(Yellow)  
Audio/Video cable (supplied)  
Example:  
Example:  
Connecting to the S-VIDEO OUT jack  
Connect the S-video cable (not supplied) as shown below.  
(The VIDEO OUT jack connection is not necessary.)  
You can enjoy clearer picture images.  
Connecting to the COMPONENT VIDEO OUT jacks  
Connect a component video cable (not supplied) as shown  
below. (The VIDEO OUT or S-VIDEO OUT jack connection is not  
necessary.) You can enjoy high quality picture images.  
For AUDIO connection, see page E12.  
For AUDIO connection, see page E12.  
If you use a TV with Progressive-scan Capability, set the  
unit to the PROGRESSIVE mode. See page E44.  
DVD recorder  
(Partial back panel)  
TV  
DVD recorder  
(Partial back panel)  
OUT  
VIDEO  
L
OU  
VIDEO  
ONENT VIDEO OUT  
R
S-VIDEO IN 1  
DIGITAL  
AUDIO  
S-VIDEO  
TV  
AUDIO  
COMPONENT VIDEO OUT  
COMPONENT VIDEO INPUT  
DIGITAL  
AUDIO  
Y
P
B
PR  
A
S-VIDEO  
To S-VIDEO  
OUT jack  
To S-video input jack  
To COMPONENT  
VIDEO OUT jacks  
*S-video cable (not supplied)  
To component video  
input jacks  
*Component video cable (not supplied)  
* Please consult your local audio/video dealer.  
-E11-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Step 3: Connecting the Audio Cables  
Select the audio connection that best suits your system.  
(If the TV has an antenna input jack only, skip this step.)  
Note:  
For VIDEO connection, see page E11.  
Example:  
Connecting to your TV (or Audio System)  
The built-in speakers in your TV will sound.  
TV with Audio/Video input jacks  
To audio input jacks  
DVD recorder (Partial back panel)  
OUT  
VIDEO  
L
AUDIO  
VIDEO  
INPUT  
1
R-AUDIO-L VIDEO  
COMPONENT VIDEO OUT  
R
DIGITAL  
AUDIO  
S-VIDEO  
AUDIO  
*To video input (Yellow)  
*(Yellow)  
To AUDIO OUT jacks  
or  
Audio/Video cable (supplied)  
Audio System  
*The yellow plug is used for video connection. See page  
E11.  
L
AUDIO  
INPUT  
Notes:  
R
•
If your TV has one audio input jack, connect the AUDIO OUT  
jacks of the unit to a Y-cable adaptor (not supplied), then  
connect it to the TV’s audio input jack. Please consult your  
local audio/video dealer.  
To audio input jacks  
•
Do not connect the AV1 IN or AV2 IN (AUDIO L/R) jacks of  
the unit to your TV’s audio output jacks at the same time.  
Need help? Call  
1-800-813-3435  
-E12-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Example:  
Connecting to an Amplifier with Dolby Digital Decoder or DTS Decoder  
Connect the audio cable and/or coaxial digital cable or optical digital cable.  
To digital audio input  
or  
Amplifier with Dolby Digital Decoder  
or DTS Decoder  
*Optical digital cable  
(not supplied)  
*Coaxial digital cable  
(not supplied)  
Center  
speaker  
or  
To Optical DIGITAL  
AUDIO OUT jack  
To Coaxial DIGITAL  
AUDIO OUT jack  
Front left  
speaker  
Front right  
speaker  
OUT  
VIDEO  
Subwoofer  
L
R
Surround right  
speaker  
Surround left  
speaker  
DIGITAL  
AUDIO  
AUDIO  
S-VIDEO  
DVD recorder  
(Partial back panel)  
Before connecting, remove the  
protective cap from the jack. Replace  
the cover when the jack is not in use.  
*Please consult your local audio/video dealer.  
Manufactured under license from Dolby Laboratories.  
“Dolby”, “Pro Logic” and the double-D symbol are trademarks of  
Dolby Laboratories.  
To enjoy Dolby Digital or DTS sound  
Set “Digital Out” to “ON” in “Audio Setup” screen. See page E31.  
“DTS” and “DTS Digital Out” are trademarks of Digital Theater  
Systems, Inc.  
Example:  
Connecting to an Amplifier with Dolby Pro Logic Decoder  
Amplifier with Dolby Pro Logic Decoder  
To AUDIO INPUT jacks  
*Audio cable  
(not supplied)  
Center  
speaker  
DVD recorder  
(Partial back panel)  
To AUDIO OUT jacks  
Front left  
speaker  
Front right  
speaker  
OUT  
VIDEO  
Subwoofer  
L
COMPONENT VIDEO OUT  
R
Surround left  
speaker  
Surround right  
speaker  
DIGITAL  
AUDIO  
AUDIO  
S-VIDEO  
Note:  
Please refer to your amplifier instruction manual.  
*Please consult your local audio/video dealer.  
-E13-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Step 4: Connecting the Power Cord  
Connect the power cord to a 120VAC 60Hz outlet. This unit is equipped with a polarized plug. If you have difficulty inserting the plug, turn  
it over and reinsert it. If the unit will not be used for a long time, disconnect the AC plug from the AC outlet.  
Notes:  
•
•
Before plugging the power cord into an AC outlet, make sure that all the connections have been made.  
The unit is not disconnected from the AC power unless the power cord is unplugged from the AC outlet.  
CAUTION:  
AV  
1
IN  
OUT  
VIDEO  
VIDEO  
3
4
TO PREVENT ELECTRIC SHOCK, MATCH WIDE  
BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.  
L
L
ANTENNA  
COMPONENT VIDEO OUT  
R
R
IN  
OUT  
S-VIDEO  
AUDIO  
DIGITAL  
AUDIO  
S-VIDEO  
AUDIO  
ATTENTION :  
POUR ÉVITER LES CHOC ÉLECTRIQUES‚  
INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE  
DANS LA BORNE CORRESPONDANTE DE LA PRISE  
ET POUSSER JUSQU’ AU FOND.  
To AC 120V, 60Hz  
Need help? Call  
1-800-813-3435  
-E14-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting a VCR or Similar Recording Equipment to This Unit  
You can use this unit as the source player or as the recording deck.  
First, disconnect the AC power cord from an AC outlet.  
Connect a VCR or similar recording equipment to this unit as shown below.  
See also the owner’s manual supplied with the connected equipment.  
CAUTION:  
Pictures containing copyright protection signals cannot be recorded.  
Example:  
Connection for recording from other equipment  
Connect a VCR or similar recording equipment to the AV1 IN or AV2 IN jacks.  
See “AV Select” on page E32.  
Note:  
Do not connect the video (yellow) jack when using an S-video cable (not supplied).  
To AV output jacks  
A/V  
OUTPUT  
JACKS  
S-VIDEO VIDEO R-AUDIO-L  
S-VIDEO VIDEO R-AUDIO-L  
S-VIDEO  
VIDEO  
A/V  
INPUT  
JACKS  
A/V  
OUTPUT  
JACKS  
VCR, etc.  
To AV output jacks  
R
AUDIO  
L
DV camcorder, etc.  
*Audio/Video cable (not supplied)  
To AV2 IN jacks  
*Audio/Video cable (not supplied)  
To AV1 IN jacks  
*S-video cable  
(not supplied)  
*S-video cable (not supplied)  
AV 1 IN  
VIDEO  
3
4
L
ANTENNA  
COMPONENT VIDEO OUT  
R
IN  
OUT  
S-VIDEO  
AUDIO  
Open the lid.  
DVD recorder  
DVD recorder (Partial back panel)  
*Please consult your local audio/video dealer.  
CAUTION:  
Almost all videos and DVD softwares on sale have a copy-  
protection. You cannot record them using this unit.  
Video Games cannot be recorded.  
Need help? Call  
1-800-813-3435  
-E15-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Example:  
Connection for recording to other equipment  
Connect a VCR or similar recording equipment to the OUT jacks.  
Notes:  
•
•
Do not connect the video (yellow) jack when using an S-video cable (not supplied).  
If you pass the DVD recorder signals via the VCR, you may not receive a clear image on the TV screen.  
S-VIDEO VIDEO R-AUDIO-L  
S-VIDEO VIDEO R-AUDIO-L  
A/V  
INPUT  
JACKS  
A/V  
OUTPUT  
JACKS  
VCR, etc.  
To AV input jacks  
*Audio/Video cable (not supplied)  
*S-video cable (not supplied)  
To AUDIO OUT jacks  
IN  
L
OUT  
VIDEO  
L
COMPONENT VIDEO OUT  
R
R
AUDIO  
DIGITAL  
AUDIO  
AUDIO  
S-VIDEO  
DVD recorder (Partial back panel)  
*Please consult your local audio/video dealer.  
CAUTION:  
Almost all videos and DVD softwares on sale have a copy-  
protection. You cannot record them using this unit.  
Need help? Call  
1-800-813-3435  
-E16-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting to a Satellite Receiver or a Cable Box  
Connect a satellite receiver, digital cable box, or cable box to this unit using the AV1 IN jacks.  
First, disconnect the AC power cord from an AC outlet.  
See also the owner’s manual supplied with the connected equipment.  
A/V OUTPUT JACKS  
VIDEO R-AUDIO-L  
TO TV  
ANT. IN  
CHANNEL  
3
4
Satellite receiver or Cable box, etc.  
To AV output jacks  
*Audio/Video cable (not supplied)  
To AV1 IN jacks  
AV 1 IN  
OUT  
VIDEO  
VIDEO  
3
4
L
L
ANTENNA  
COMPONENT VIDEO OUT  
R
R
IN  
OUT  
S-VIDEO  
AUDIO  
DIGITAL  
AUDIO  
AUDIO  
S-VIDEO  
DVD recorder (Partial back panel)  
*Please consult your local audio/video dealer.  
CAUTION:  
Pictures containing copyright protection signals cannot be  
recorded.  
Need help? Call  
1-800-813-3435  
-E17-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETTING THE CLOCK  
When the unit is first connected to the AC outlet (“-- : --” may brink  
on the FL display), or after the power has failed, please follow the  
steps below.  
Important Note:  
POWER  
ENTER  
This unit uses the International Time System (24-hour display).  
Therefore the unit does not have Daylight Saving Time (DST)  
function. You must set the clock when summer switches to  
winter and vice versa.  
SETUP  
4, 5, a, b  
Preparations  
Turn on the TV and select the appropriate video input to suit the  
connections to this unit. (Refer to your TV’s owner manual.)  
7. Press [ENTER] (or [a]).  
“Set Clock Setup” screen appears.  
Example:  
To Set the Clock  
1. Press [POWER] to turn on the power.  
•
•
“POWER ON” appears briefly on the FL display.  
“SANYO” logo appears on the TV screen.  
Set Clock Setup  
Select a field then use 4to edit.  
5
2. Press [SETUP] in “NO DISC” mode.  
“Menu” screen appears on the TV screen.  
Hour Minute  
Year  
2004  
Month Day  
Jan 01  
4
00  
5
00  
/
/
a
Menu  
Play/Edit Disc  
4
Record Program  
Record Status  
Record List  
a
5
Setup Menu  
Press SETUP to exit  
Done  
Cancel  
8. Press [o], [p], [a] or [b] repeatedly (or number buttons) to  
set the date and time.  
Example:  
Press SETUP to exit  
Set Clock Setup  
3. Press [p] to select “Setup Menu”.  
Menu  
Select a field then use 4to edit.  
5
Hour Minute  
08 30  
Year  
2004  
Month Day  
4
Play/Edit Disc  
Record Program  
Setup Menu  
Recording Setup  
:
/
May  
01  
b
a
DVD Control  
General  
Video  
4
a
Audio  
Press SETUP to exit  
Done  
Cancel  
4. Press [ENTER] (or [a]).  
“Recording Setup” is highlighted.  
9. Press [a] to select “Done”.  
Note:  
5. Press [ENTER] (or [a]) again.  
If you want to cancel it, press [a] to select “Cancel”, and  
then press [ENTER]. “Recording Setup” screen returns.  
“Recording Setup” screen appears.  
Recording Setup  
10. Press [ENTER].  
Record Mode  
Auto Chapter  
Set Clock  
HQ  
SP  
LP  
a
•
•
“Recording Setup” screen returns.  
“Set Clock” is highlighted.  
11. Press [SETUP].  
Channel Setup  
EP  
EP+  
“Recording Setup” screen disappears.  
6. Press [p] to select “Set Clock”.  
12. Press [POWER] to turn off the power.  
The clock appears on the FL display.  
Example: 08:30  
Record Mode  
Auto Chapter  
4
Set Clock  
Channel Setup  
-E18-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TUNER SETTING  
This unit is equipped with a channel memory feature which  
allows channels to skip up or down to the next channel set into  
memory, skipping over unwanted channels.  
Before selecting channels, they must be programmed into the  
memory. In addition to normal VHF and UHF channels, this unit  
can receive up to 125 Cable TV channels. To use this unit with an  
antenna, set the “Channel Setup” menu.  
Important Note:  
•
The antenna must be connected to this unit. See pages E8  
~ E10.  
4, 5, a, b  
•
You may need extra instructions during this setting. If a  
message appears, please follow the instructions displayed  
on the TV screen.  
ENTER  
•
For improvement, on-screen display subject to change  
without notice.  
Tuner Select  
Select the antenna system “CATV” or “TV”.  
Setting “Channel Setup”  
1. Open “Recording Setup” screen.  
(Repeat steps 1 ~ 5 of “To Set the Clock” on page E18.)  
1) Select “Tuner Select”.  
Recording Setup  
Record Mode  
Recording Setup  
Record Mode  
Auto Chapter  
Set Clock  
HQ  
SP  
LP  
a
Auto Chapter  
Set Clock  
Auto CH Scan  
Channel List  
Modify Channel  
Tuner Select  
MTS Select  
Channel Setup  
EP  
EP+  
Channel Setup  
4
b
5
Press SETUP to exit  
Current selection  
Press SETUP to exit  
2. Press [p] to select “Channel Setup”.  
2) Press [ENTER] (or [a]).  
“Tuner Select Setup” screen appears.  
3. Press [ENTER] (or [a]) to select the sub menu.  
Tuner Select Setup  
Recording Setup  
Tuner Select  
CATV  
TV  
a
Record Mode  
Auto Chapter  
Set Clock  
Auto CH Scan  
Channel List  
Modify Channel  
Tuner Select  
MTS Select  
b
5
Channel Setup  
Press SETUP to exit  
Current selection  
Press SETUP to exit  
3) Press [a] to select the sub menu.  
4) Press [p] or [o] to select “CATV” or “TV”.  
5) Press [ENTER]. “√” appears.  
4. Press [p] or [o] to select the item.  
Auto CH Scan  
Channel List  
===> See page E20.  
===> See page E20.  
6) Press [b] repeatedly to return to “Recording Setup” screen.  
Modify Channel ===> See page E21.  
Tuner Select  
MTS Select  
===> See the right column.  
===> See page E21.  
If you use this unit for first time, select “Tuner Select”.  
Need help? Call  
1-800-813-3435  
-E19-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Auto CH Scan  
1) Select “Auto CH Scan”.  
Channel List  
1) Select “Channel List”.  
Recording Setup  
Recording Setup  
Record Mode  
Auto Chapter  
Set Clock  
Record Mode  
Auto Chapter  
Set Clock  
Auto CH Scan  
Auto CH Scan  
Channel List  
Modify Channel  
Tuner Select  
MTS Select  
b
4
5
Channel List  
b
5
Channel Setup  
Modify Channel  
Channel Setup  
Tuner Select  
MTS Select  
Press SETUP to exit  
Press SETUP to exit  
2) Press [ENTER] (or [a]).  
A message screen appears.  
2) Press [ENTER] (or [a]).  
“Channel List” screen appears.  
Example:  
Auto Chapter  
Set
Auto CH Scan  
b
5
Channel List  
Press Yes to continue Auto Scan  
press No to exit  
CATV  
6
Enabled  
Cha
b
5
CATV  
8
Enabled  
Enabled  
Enabled  
Enabled  
Enabled  
Enabled  
Enabled  
Enabled  
No  
Yes  
CATV 10  
CATV 12  
CATV 22  
CATV 24  
CATV 45  
CATV 91  
CATV 96  
“Yes” is highlighted.  
Note:  
If you want to cancel it, press [a] to select “No”, and then  
press [ENTER].  
Press ENTER to Disable  
3) Press [ENTER].  
Note:  
Auto memory channel scanning screen appears and starts  
to memorize all the channels available in your area.  
If you want to receive or not receive the channel, press [p]  
or [o] to select the channel, and then press [ENTER].  
“Enabled” or “Disabled” appears.  
Rec
Scanning for Channels (CATV) ...  
Aut
3) Press [b] to return to “Recording Setup” screen.  
5
Total Channels Found: 001  
Set
Cha
Please wait until the confirmation screen appears.  
The confirmation screen appears.  
Example:  
Rec
Total channels found (CATV): 009  
Do you want to view the available  
Aut
5
channels?  
Set
Cha
4, 5, a, b  
Yes  
No  
ENTER  
“Yes” is highlighted.  
Note:  
If you don't want it, press [a] to select “No”, and then  
press [ENTER].  
4) Press [ENTER].  
“Channel List” screen appears. (Refer to the right column.)  
Note:  
If you want to receive or not receive the channel, press [p]  
or [o] to select the channel, and then press [ENTER].  
“Enabled” or “Disabled” appears.  
Need help? Call  
1-800-813-3435  
5) Press [b] to return to “Recording Setup” screen.  
-E20-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Modify Channel  
MTS (Multi-channel TV Sound) Select  
This unit is equipped with a feature known as Multi-channel  
TV Sound or MTS. MTS broadcasts greatly enhance TV  
viewing by bringing you programs with high fidelity stereo  
sound.  
MTS also provides an extra channel called the Second Audio  
Program or SAP which broadcasters can use to transmit a  
second language for bilingual transmission or for other  
purposes.  
1) Select “Modify Channel”.  
Recording Setup  
Record Mode  
Auto Chapter  
Set Clock  
Auto CH Scan  
Channel List  
Modify Channel  
Tuner Select  
MTS Select  
4
Channel Setup  
b
5
1) Select “MTS Select”.  
Press SETUP to exit  
Recording Setup  
Record Mode  
2) Press [ENTER] (or [a]).  
Auto Chapter  
Set Clock  
Auto CH Scan  
Channel List  
Modify Channel  
Tuner Select  
MTS Select  
“CATV Modify Channel” or “TV Modify Channel” screen  
appears.  
Example:  
Channel Setup  
4
CATV Modify Channel  
b
4a  
CATV  
001  
CATV  
CATV  
CATV  
CATV  
CATV  
CATV  
CATV  
CATV  
CATV  
001  
002  
003  
004  
005  
006  
007  
008  
009  
5
Press SETUP to exit  
2) Press [ENTER] (or [a]).  
“MTS Select Setup” screen appears.  
ADD Channel  
Fine Tuning  
Delete Channel  
Done  
MTS Select Setup  
MTS Select  
Stereo  
a
SAP  
MONO  
3) Press [p] or [o] to select the desired channel to be modified.  
4) Press [a] to select the sub menu.  
“ADD Channel” is highlighted.  
5) Press [p] or [o] to select “ADD Channel”, “Fine Tuning” or  
“Delete Channel”, and then press [ENTER].  
Press SETUP to exit  
Current selection  
ADD Channel  
The channel is added.  
3) Press [a] to select the sub menu.  
4) Press [p] or [o] to select “Stereo”, “SAP” or “MONO”.  
Usually select “Stereo”.  
Fine Tuning  
“Fine Tuning” screen appears.  
Press [a] or [b] to adjust it.  
Press [p] to select “Done” and then press [ENTER].  
(To cancel it, select “Cancel” and then press [ENTER].)  
5) Press [ENTER].  
“√” appears.  
6) Press [b] repeatedly to return to “Recording Setup” screen.  
Note:  
Press [SETUP] to close the screen.  
Delete Channel  
The channel is deleted.  
6) Repeat these steps as necessary.  
After the setting is completed, select “Done”, and then press  
[ENTER]. “Recording Setup” screen returns.  
If you want to confirm the channel, open the “Channel List”  
screen. (See the previous page.)  
4, 5, a, b  
ENTER  
-E21-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BEFORE INITIAL SETTING  
Common Procedure  
Important Note:  
•
In this instruction manual, the language in on-screen display  
is English.  
•
•
•
See “SETTING THE CLOCK” on pages E18 and “TUNER  
SETTING” on pages E19 first.  
If you change the language, please follow the selected  
language in on-screen display.  
Turn on the TV and select the appropriate video input to suit  
the connections to this unit. (Refer to your TV’s owner manual.)  
Press [n] before setting if the unit is receiving the TV program.  
•
•
You may need extra instructions during the setting. If a  
message appears, please follow the instructions displayed  
on the TV screen.  
For improvement, on-screen display subject to change  
without notice.  
1. Press [POWER] to turn on the power.  
•
•
“POWER ON” appears briefly on the FL display.  
“SANYO” logo appears on the TV screen.  
2. Press [SETUP] in “NO DISC” mode or full stop mode.  
“Menu” screen appears on the TV screen.  
3. Press [p] (or [o]) to select the desired menu and go to the  
reference page.  
POWER  
Menu  
Play/Edit Disc  
SETUP  
4
4
Record Program  
Record Status  
Record List  
See page E33.  
See page E37.  
a
5
Setup Menu  
5
Press SETUP to exit  
Menu  
Play/Edit Disc  
Record Program  
Setup Menu  
Recording Setup  
DVD Control  
General  
See page E23.  
See page E25.  
See page E29.  
See page E30.  
See page E31.  
See page E32.  
4
a
Video  
Audio  
AV Select  
Press SETUP to exit  
Note:  
When a disc is loaded, “Play/Edit Disc” can be selected.  
Menu  
Play/Edit Disc  
Record Program  
Setup Menu  
Play/Edit Titles  
Edit Disc  
See page E55.  
See page E57.  
a
5
Press SETUP to exit  
Need help? Call  
1-800-813-3435  
-E22-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INITIAL SETTINGS  
Setting “Record Mode”  
1. Select “Record Mode”.  
Recording Setup  
This is a setup for recording on a DVD+RW or DVD+R disc.  
Recording Setup  
Record Mode  
Auto Chapter  
Set Clock  
HQ  
SP  
LP  
a
Preparations  
(Recording Setup ---> Record Mode & Auto Chapter)  
Channel Setup  
EP  
EP+  
1. Select “Setup Menu” in “Menu” screen. See page E22.  
Menu  
Play/Edit Disc  
Record Program  
Setup Menu  
Recording Setup  
DVD Control  
General  
Press SETUP to exit  
Current selection  
4
a
2. Press [ENTER] (or [a]) to select the sub menu.  
Video  
Recording Setup  
Audio  
AV Select  
Record Mode  
Auto Chapter  
Set Clock  
HQ  
SP  
LP  
4
b
Press SETUP to exit  
5
2. Press [ENTER] (or [a]).  
Channel Setup  
EP  
EP+  
“Recording Setup” is highlighted.  
3. Press [ENTER] (or [a]) again.  
Press SETUP to exit  
Current selection  
“Recording Setup” screen appears.  
Recording Setup  
3. Press [p] or [o] to select the desired record mode.  
Record mode  
HQ:  
SP (Standard mode):  
LP:  
EP:  
EP+:  
Record time (minutes)  
60  
120  
180  
240  
360  
Record Mode  
Auto Chapter  
Set Clock  
HQ  
a
SP  
LP  
Channel Setup  
EP  
EP+  
Please note the following:  
Press SETUP to exit  
Current selection  
•
The record times are an estimate and actual times may  
differ.  
4. Press [o] or [p] to select the item.  
•
The record time may differ depending on the recording  
conditions.  
Record Mode  
Auto Chapter  
Set Clock  
===> See the right column.  
===> See page E24.  
===> See page E18.  
===> See page E19.  
-
Recording a program with poor reception, or a program  
or video source of low picture quality  
Channel Setup  
-
-
Recording on a disc that has already been edited  
Recording only a still picture or just sound  
4. Press [ENTER].  
“√” appears.  
The record mode is set.  
5. Press [b] to return to “Record Mode”.  
4, 5, a, b  
ENTER  
Need help? Call  
1-800-813-3435  
-E23-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting “Auto Chapter”  
When recording starts, the chapters in the title are made  
automatically on the disc by this setting.  
1. Select “Auto Chapter”.  
Recording Setup  
Record Mode  
4
Auto Chapter  
Set Clock  
4 Min.  
10 Min.  
20 Min.  
30 Min.  
OFF  
a
SETUP  
Channel Setup  
4, 5, a, b  
ENTER  
Press SETUP to exit  
Current selection  
2. Press [ENTER] (or [a]) to select the sub menu.  
3. Press [p] or [o] to select the desired time.  
4. Press [ENTER].  
“√” appears.  
5. Press [b] to return to “Auto Chapter”.  
Notes:  
•
To set “Set Clock”, see “SETTING THE CLOCK” on page  
E18.  
•
To set “Channel Setup”, see “TUNER SETTING” on page  
E19.  
•
•
Press [b] again to return to “Menu” screen.  
Press [SETUP] to close the screen.  
Need help? Call  
1-800-813-3435  
-E24-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting “Disc Menu”  
1. Select “Disc Menu”.  
DVD Control  
This is a setup for playing back DVD-Video discs.  
DVD Control Setup  
Disc Menu  
Angle Mark  
Audio  
Disc  
a
Preparations  
(DVD Control ---> Disc Menu, Angle Mark, Audio, Subtitle &  
Parental Control)  
English  
German  
Italian  
Subtitle  
Parental Control  
Spanish  
French  
1. Select “Setup Menu” in “Menu” screen. See page E22.  
Menu  
Press SETUP to exit  
Current selection  
Play/Edit Disc  
Record Program  
Setup Menu  
Recording Setup  
DVD Control  
General  
2. Press [ENTER] (or [a]) to select the sub menu.  
4
a
DVD Control Setup  
Video  
Audio  
Disc Menu  
Angle Mark  
Audio  
Disc  
b
5
AV Select  
English  
German  
Italian  
Press SETUP to exit  
Subtitle  
Parental Control  
Spanish  
French  
2. Press [ENTER] (or [a]).  
“Recording Setup” is highlighted.  
Press SETUP to exit  
Current selection  
3. Press [p] to select “DVD Control”.  
3. Press [p] or [o] to select the desired language.  
Note:  
4. Press [ENTER] (or [a]).  
“DVD Control Setup” screen appears.  
Disc: The first priority language of the disc  
DVD Control Setup  
4. Press [ENTER].  
“√” appears.  
Disc Menu  
Angle Mark  
Audio  
Disc  
a
English  
German  
Italian  
The disc menu language is set.  
Subtitle  
5. Press [b] to return to “Disc Menu”.  
Parental Control  
Spanish  
French  
Press SETUP to exit  
Current selection  
5. Press [o] or [p] to select the item.  
Disc Menu  
Angle Mark  
Audio  
===> See the right column.  
===> See page E26.  
===> See page E26.  
===> See page E26.  
Subtitle  
Parental Control ===> See page E27.  
4, 5, a, b  
ENTER  
Need help? Call  
1-800-813-3435  
-E25-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting “Angle Mark”  
To show the angle mark when playing back DVD-Video discs  
(recorded with multi-angle), select this setting.  
Setting “Audio”  
1. Select “Audio”.  
DVD Control Setup  
Disc Menu  
Angle Mark  
Audio  
Disc  
1. Select “Angle Mark”.  
English  
DVD Control Setup  
4
German  
a
Disc Menu  
Subtitle  
Italian  
4
Angle Mark  
Audio  
ON  
a
Parental Control  
Spanish  
French  
OFF  
Subtitle  
Press SETUP to exit  
Current selection  
Parental Control  
2. Press [ENTER] (or [a]) to select the sub menu.  
Press SETUP to exit  
Current selection  
DVD Control Setup  
2. Press [ENTER] (or [a]) to select the sub menu.  
Disc Menu  
Angle Mark  
Audio  
Disc  
b
5
English  
German  
Italian  
DVD Control Setup  
Disc Menu  
Subtitle  
Angle Mark  
Audio  
ON  
b
Parental Control  
Spanish  
French  
5
OFF  
Subtitle  
Press SETUP to exit  
Current selection  
Parental Control  
3. Press [p] or [o] to select the desired language.  
Note:  
Press SETUP to exit  
Current selection  
Disc: The first priority language of the disc  
3. Press [p] or [o] to select “ON” or “OFF”.  
4. Press [ENTER]. “√” appears.  
4. Press [ENTER]. “√” appears.  
5. Press [b] to return to “Audio”.  
5. Press [b] to return to “Angle Mark”.  
Setting “Subtitle”  
1. Select “Subtitle”.  
2. Repeat the same steps as described in “Setting Audio”.  
4, 5, a, b  
ENTER  
Need help? Call  
1-800-813-3435  
-E26-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4) Press [p] to select “Done”.  
5) Press [ENTER].  
Setting “Parental Control”  
Notes:  
The parental lock level screen appears.  
Example:  
•
•
“Password” is set to “0000” before shipping from the factory.  
You may need extra instructions during the setting. If a  
message appears, please follow the instructions displayed  
on the TV screen.  
Parental Control Set  
Choose Rating  
1 G  
a
1. Select “Parental Control”.  
Set Password  
2
3 PG  
4 PG 13  
5
Menu  
Disc Menu  
Angle Mark  
Audio  
6 PG-R  
Press SETUP to exit  
Current selection  
Subtitle  
4
Parental Control  
Choose Rating  
Set Password  
a
6) Press [ENTER] (or [a]) to select the sub menu.  
7) Press [p] or [o] to select the parental lock level.  
Press SETUP to exit  
Parental Control  
2. Press [ENTER] (or [a]) to select the sub menu.  
MPAA (Motion Picture Association of America) Guideline  
is a rating system that provides advanced cautionary  
information to parent about the content of movie programs.  
DVD Control Setup  
Disc Menu  
Angle Mark  
Audio  
The parental lock level is equivalent to the following  
MPAA Rating System.  
1 G (General audiences)  
3 PG (Parental guidance suggested)  
4 PG-13 (Parents strongly cautioned)  
6 PG-R (Restricted)  
Subtitle  
Parental Control  
Choose Rating  
b
5
Set Password  
7 NC-17 (No one 17 and under admitted)  
8 Adult  
Press SETUP to exit  
No Parental  
3. Press [p] or [o] to select “Choose Rating” or “Set Password”.  
Some DVD-Video discs contain a restriction level which  
enables parents to prevent playback of discs by children.  
This unit is equipped with a password designed to prevent  
children changing the level.  
Choosing Rating  
1) Select “Choose Rating”.  
2) Press [ENTER] (or [a]).  
“Parental Control Set” screen appears.  
Parental Control Set  
You cannot play DVD-Video discs rated higher than the  
level you selected unless you cancel the parental lock  
function.  
Password  
For example, when you select level “5”, the unit will not  
play discs with ratings of “6”, “7” or “8”.  
The information will appear on the TV screen.  
Delete  
Clear  
0
a
k
u
1
b
l
2
3
4
5
f
p
z
6
7
8
9
j
t
c
d
e
g
q
h
r
i
m
w
n
x
o
y
s
v
Space  
If you forget the password…  
Done  
Back  
1. Enter [+10],[+10],[+10], and [+10]. (The numbers do  
Press SETUP to exit  
not appear in the box.)  
It returns to the original factory setting “0000”.  
2. Enter a new password and set the parental lock level  
again.  
Note:  
If you want to cancel the setting, select “Back”, and press  
[ENTER]. “DVD Control Setup” screen returns.  
Note:  
3) Press the directional arrow button (a, b, o, p), and press  
[ENTER] to enter the password.  
DVD video discs may or may not respond to the parental  
lock settings. Make sure this function works with your  
DVD video discs.  
Note:  
If you use this unit for first time, enter [0], [0], [0] and [0].  
Because the initial password is set “0000” before shipping  
from the factory.  
8) Press [ENTER]. “√” appears.  
9) Press [b] twice to return to “DVD Control Setup” screen.  
-E27-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Set Password  
7) Press [ENTER].  
1) Select “Set Password”.  
2) Press [ENTER] (or [a]).  
“Parental Control Set” screen appears.  
“New Password” screen appears.  
Parental Control Set  
New Password (8 chars)  
Parental Control Set  
Password  
Delete  
Clear  
0
a
k
u
1
b
l
2
c
m
w
3
d
n
x
4
e
o
y
5
f
p
z
6
g
q
7
h
r
8
9
j
t
i
Delete  
Clear  
s
0
a
k
u
1
b
l
2
3
4
5
f
p
z
6
7
8
9
j
t
v
Space  
c
d
e
g
q
h
r
i
Done  
Back  
m
w
n
x
o
y
s
v
Space  
Press SETUP to exit  
Done  
Back  
Press SETUP to exit  
8) Press the directional arrow button (a, b, o, p), and press  
[ENTER] to enter the new password (maximum 8  
characters or numbers).  
9) Press [p] to select “Done”.  
10)Press [ENTER].  
Note:  
If you want to cancel it, select “Back”, and then press  
[ENTER]. “DVD Control Setup” screen returns.  
“Confirm Password” screen appears.  
11)Press [o] to return to the character list.  
12)Enter the same password as above.  
13)Press [p] to select “Done”.  
3) Enter the password.  
(Please refer to “Choosing Rating” on the previous page.  
If you use this unit for first time, enter [0], [0], [0] and [0].)  
4) Press [p] repeatedly to select “Done”.  
5) Press [ENTER].  
14)Press [ENTER].  
The new password is set.  
The parental lock level screen appears.  
Parental Control Set  
Parental Control Set  
Choose Rating  
4
Choose Rating  
1 G  
a
Set Password  
Set Password  
2
3 PG  
4 PG 13  
5
6 PG-R  
Press SETUP to exit  
Press SETUP to exit  
Current selection  
15)Press [b] to return to “DVD Control Setup” screen.  
6) Press [p] to select “Set Password”.  
Notes:  
•
Parental Control Set  
If you want to cancel the setting, select “Back”, and then  
press “ENTER”. “DVD Control Setup” screen returns.  
Press [SETUP] to close the screen.  
Choose Rating  
4
•
Set Password  
Press SETUP to exit  
SETUP  
4, 5, a, b  
ENTER  
Need help? Call  
1-800-813-3435  
+10  
-E28-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting “Menu Language”  
1. Press [ENTER] (or [a]) to select the sub menu.  
General  
This is on-screen language setting.  
In this instruction manual, the language in on-screen display is  
English.  
General Setup  
Menu Language  
English  
b
5
If you change the language, please follow the selected language  
in on-screen display.  
Spanish  
Preparations  
(General ---> Menu Language)  
Press SETUP to exit  
Current selection  
1. Select “Setup Menu” in “Menu” screen. See page E22.  
Menu  
2. Press [p] or [o] to select the desired language.  
Play/Edit Disc  
Record Program  
Setup Menu  
Recording Setup  
DVD Control  
General  
3. Press [ENTER].  
“√” appears.  
4
a
The menu language is set.  
Video  
Audio  
4. Press [b] to return to “Menu Language”.  
AV Select  
Notes:  
Press SETUP to exit  
•
•
Press [b] again to return to “Menu” screen.  
Press [SETUP] to close the screen.  
2. Press [ENTER] (or [a]).  
“Recording Setup” is highlighted.  
3. Press [p] to select “General”.  
4. Press [ENTER] (or [a]).  
“General Setup” screen appears.  
General Setup  
Menu Language  
English  
a
SETUP  
Spanish  
4, 5, a, b  
ENTER  
Press SETUP to exit  
Current selection  
Need help? Call  
1-800-813-3435  
-E29-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting “TV Display”  
1. Press [ENTER] (or [a]) to select the sub menu.  
Video  
In this section, select the playback picture size according to the  
aspect ratio of the TV,  
Video Setup  
TV Display  
4:3 PS  
4
4:3 LB  
b
Preparations  
(Video ---> TV Display)  
5
16:9 Wide  
1. Select “Setup Menu” in “Menu” screen. See page E22.  
Menu  
Press SETUP to exit  
Current selection  
Play/Edit Disc  
Record Program  
Setup Menu  
Recording Setup  
DVD Control  
General  
2. Press [p] or [o] to select the appropriate setting for your TV  
4
a
screen size.  
Video  
Audio  
4:3 PS (Panscan):  
Select when a conventional TV set  
AV Select  
is connected.  
Press SETUP to exit  
When the wide screen disc is played  
back, it displays pictures cropped to  
fill to your TV screen. The left and  
2. Press [ENTER] (or [a]).  
“Recording Setup” is highlighted.  
Cut off  
Cut off  
right edges are cut off.  
3. Press [p] to select “Video”.  
4:3 LB (Letterbox):  
Select when a conventional TV set  
is connected.  
When the wide screen disc is played  
back, the black bands appear at the  
top and bottom of screen.  
4. Press [ENTER] (or [a]).  
“Video Setup” screen appears.  
Video Setup  
TV Display  
4:3 PS  
a
4:3 LB  
16:9 Wide:  
Select when a wide screen TV set  
16:9 Wide  
is connected.  
Played in “FULL” size. (Setting the  
wide screen TV to “FULL” mode is  
also necessary.)  
Press SETUP to exit  
Current selection  
Notes:  
•
The screen size may differ depending on the DVD video  
discs.  
•
If you select 16:9 Wide to get rid of the black bands on  
screen when wide screen disc is played back, picture  
may be slightly distorted.  
•
In some discs, even if 4:3 PS is selected, the black bands  
may remain on the screen.  
3. Press [ENTER]. “√” appears.  
4. Press [b] to return to “TV Display”.  
Notes:  
SETUP  
4, 5, a, b  
•
•
Press [b] again to return to “Menu” screen.  
Press [SETUP] to close the screen.  
ENTER  
Need help? Call  
1-800-813-3435  
-E30-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting “Digital Out”  
If the coaxial or optical DIGITAL AUDIO OUT jack is connected  
to the digital amplifier, you must set as follows:  
Audio  
Preparations  
(Audio ---> Digital Out & DRC)  
1. Select “Digital Out”.  
1. Select “Setup Menu” in “Menu” screen. See page E22.  
2. Press [ENTER] (or [a]) to select the sub menu.  
Menu  
Audio Setup  
Play/Edit Disc  
Record Program  
Setup Menu  
Recording Setup  
DVD Control  
General  
Digital Out  
OFF  
b
5
DRC  
ON  
4
a
Video  
Audio  
AV Select  
Press SETUP to exit  
Press SETUP to exit  
Current selection  
2. Press [ENTER] (or [a]).  
3. Press [p] or [o] to select “ON” or “OFF”.  
4. Press [ENTER]. “√” appears.  
“Recording Setup” is highlighted.  
3. Press [p] to select “Audio”.  
5. Press [b] to return to “Digital Out”.  
4. Press [ENTER] (or [a]).  
“Audio Setup” screen appears.  
Setting “DRC (Dynamic Range Control)”  
1. Select “DRC”.  
Audio Setup  
Digital Out  
OFF  
a
Audio Setup  
DRC  
ON  
Digital Out  
4
DRC  
OFF  
STD  
TV  
a
Press SETUP to exit  
Current selection  
5. Press [p] or [o] to select “Digital Out” or “DRC”.  
Press SETUP to exit  
Current selection  
2. Press [ENTER] (or [a]) to select the sub menu.  
Audio Setup  
Digital Out  
DRC  
OFF  
STD  
TV  
b
5
SETUP  
Press SETUP to exit  
Current selection  
4, 5, a, b  
3. Press [p] or [o] to select “OFF, “STD” or “TV”.  
OFF: Off position  
ENTER  
STD: When connecting the amplifier to the AUDIO OUT  
jacks (not DIGITAL AUDIO OUT jacks)  
TV: When using 3 or 4 channel on TV  
4. Press [ENTER].  
“√” appears.  
5. Press [b] to return to “DRC”.  
Notes:  
Need help? Call  
1-800-813-3435  
•
•
Press [b] again to return to “Menu” screen.  
Press [SETUP] to close the screen.  
-E31-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting “AV1 Select” and “AV2 Select”  
1. Press [p] or [o] to select “AV1 Select” or “AV2 Select”.  
AV1 Select: When AV1 IN jacks are used  
AV Select  
When the 1stAV input (AV1 IN) or 2nd AV input (AV2 IN) jacks  
are connected, you must set as follows:  
AV2 Select: When AV2 IN jacks are used  
2. Press [ENTER] (or [a]) to select the sub menu.  
Preparations  
(AV Select ---> AV1 Select & AV2 Select)  
AV Select  
AV1 Select  
Video  
b
1. Select “Setup Menu” in “Menu” screen. See page E22.  
5
AV2 Select  
S-Video  
Menu  
Play/Edit Disc  
Record Program  
Setup Menu  
Recording Setup  
DVD Control  
General  
4
a
Press SETUP to exit  
Current selection  
Video  
Audio  
3. Press [p] or [o] to select the video input jack.  
Video: Using VIDEO input jack  
AV Select  
Press SETUP to exit  
S-Video: Using S-VIDEO input jack  
4. Press [ENTER]. “√” appears.  
5. Press [b] to return to “AV1 Select” or “AV2 Select”.  
6. Repeat steps 1 ~ 5 as necessary.  
Notes:  
2. Press [ENTER] (or [a]).  
“Recording Setup” is highlighted.  
3. Press [p] to select “AV Select”.  
4. Press [ENTER] (or [a]).  
“AV Select” screen appears.  
•
•
Press [b] again to return to “Menu” screen.  
Press [SETUP] to close the screen.  
AV Select  
AV1 Select  
Video  
a
AV2 Select  
S-Video  
Press SETUP to exit  
Current selection  
SETUP  
4, 5, a, b  
ENTER  
Need help? Call  
1-800-813-3435  
-E32-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting “Record Time”  
Record Status  
Note:  
The program timer switches the unit on and off to record a TV  
program at a preset time.  
If you have set “Record Status” already, open “Record List”  
to check the list. Remove the unnecessary program from  
the list first. See page E37.  
You can program a total of 15 times slots to be recorded, during  
the next one-year period.  
These settings are retained in the program memory and will  
repeat as long as a recordable disc is loaded in the unit.  
1. Select “Record Time”.  
Example:  
Note:  
Record Show  
Verify the settings. Press ENTER to edit.  
The clock must be set before this setting. See “SETTING  
THE CLOCK” on page E18.  
Start  
End  
Record Time  
Record Day  
Input Source  
TV  
08:31  
09:31  
2004/05/01  
Preparations  
(Record Status ---> Record Time, Record Day, Input Source,  
TV, Record Mode & Title)  
Tuner  
10  
Record Mode  
Title  
SP  
20040501  
1. Select “Record Program” in “Menu” screen. See page E22.  
Press SETUP to exit  
Done  
Cancel  
Menu  
2. Press [ENTER].  
The start and end time screen appears.  
Example:  
Play/Edit Disc  
4
Record Program  
Record Status  
Record List  
a
5
Setup Menu  
Record Show  
Press 4or use the number keys on remote  
5
to change settings. Use the International Time  
for the hour(00-23).  
Hour Minute  
Hour Minute  
End 09 31  
4
Start 08  
:
31  
:
Done  
Back  
Press SETUP to exit  
2. Press [ENTER] (or [a]).  
“Recording Status” is highlighted.  
Press SETUP to exit  
Menu  
3. Press [o] or [p] (or the number buttons on the remote control)  
to set the start and end times.  
Play/Edit Disc  
Record Program  
Record Status  
b
Note:  
5
Setup Menu  
Record List  
Press [a] or [b] to move the cursor.  
4. Press [a] to select “Done”.  
3. Press [ENTER] (or [a]) again.  
“Record Show” screen appears.  
Example:  
5. Press [ENTER].  
The record time is set.  
The screen returns.  
Example:  
Record Show  
Verify the settings. Press ENTER to edit.  
Start  
End  
Record Time  
Record Day  
Input Source  
TV  
08:31  
09:31  
Record Show  
Verify the settings. Press ENTER to edit.  
2004/05/01  
Tuner  
10  
Start  
End  
Record Time  
Record Day  
Input Source  
TV  
21:30  
22:00  
Record Mode  
Title  
SP  
2004/05/01  
20040501  
Tuner  
10  
Press SETUP to exit  
Done  
Cancel  
Record Mode  
Title  
SP  
20040501  
4. Press [o] or [p] to select the item.  
Press SETUP to exit  
Done  
Cancel  
Record Time ===> See the right column.  
Record Day  
Input Source ===> See page E35.  
TV ===> See page E35.  
Record Mode ===> See page E36.  
Title ===> See page E36.  
===> See page E34.  
Note:  
To cancel the setting, select “Back” or “Cancel” in the screen,  
and then press [ENTER].  
Note:  
After all settings are completed, press [p] to select “Done”, and  
then press [ENTER].  
-E33-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting “Record Day”  
1. Select “Record Day”.  
Example:  
Record Show  
Verify the settings. Press ENTER to edit.  
Start End  
21:30  
Record Time  
Record Day  
Input Source  
TV  
22:00  
2004/05/01  
Tuner  
10  
Record Mode  
Title  
SP  
20040501  
Press SETUP to exit  
Done  
Cancel  
2. Press [ENTER].  
4, 5, a, b  
The calendar screen appears.  
ENTER  
Record Show  
Press 4or use the number keys on remote  
5
to change settings.  
Month  
Day  
01  
Year4  
2004  
05  
5
M
S
T
4
W
Th  
6
F
Sa  
Done  
Back  
1
8
2
9
3
5
7
10 11 12 13 14 15  
Number  
buttons  
16 17 18 19 20 21 22  
23 24 25 26 27 28 29  
30 31  
Press SETUP to exit  
3. Press [o] or [p] (or the number buttons on the remote control)  
to set the record date (“Year”, “Month” and “Day”).  
Note:  
Press [a] or [b] to move the cursor.  
Important Note:  
You may need extra operations during the setting. If a message  
appears, please follow the instructions displayed on the TV  
screen.  
4. Press [a] to select “Done”.  
5. Press [ENTER].  
The record date is set.  
The screen returns.  
Example:  
Record Show  
Verify the settings. Press ENTER to edit.  
Start  
End  
Record Time  
Record Day  
Input Source  
TV  
21:30  
22:00  
2004/05/03  
Tuner  
10  
Need help? Call  
1-800-813-3435  
Record Mode  
Title  
SP  
20040503  
Press SETUP to exit  
Done  
Cancel  
Important Information  
To set the timer recording, leave two minutes in between programs. For example if the program is scheduled to  
end at 8:00 am, the next recording should be scheduled for 8:02 am.  
7:00  
9:00  
10:00  
8:00  
Start time  
End time  
Start time (y Set this time!)  
1st Program  
3rd Program  
Start time (y Set this time!)  
2nd Program  
End time  
More than 1 minute  
More than 1 minute  
-E34-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting “Input Source”  
1. Select “Input Source”.  
Example:  
Setting “TV”  
Select the TV channel number.  
Note:  
If “AV1” or “AV2” is selected for the Input Source, the channel  
number does not appear. Skip this section.  
Record Show  
Verify the settings. Press ENTER to edit.  
Start  
End  
1. Select “TV”.  
Example:  
Record Time  
Record Day  
Input Source  
TV  
21:30  
22:00  
2004/05/03  
Tuner  
10  
Record Show  
Verify the settings. Press ENTER to edit.  
Record Mode  
Title  
SP  
Start  
End  
20040503  
Record Time  
Record Day  
Input Source  
TV  
21:30  
22:00  
2004/05/03  
Press SETUP to exit  
Done  
Cancel  
Tuner  
10  
2. Press [ENTER].  
Record Mode  
Title  
SP  
“Input Source” screen appears.  
20040503  
Record Show  
Press SETUP to exit  
Done  
Cancel  
Press 4to change settings.  
5
2. Press [ENTER].  
“TV” screen appears.  
Example:  
4
Input Source  
Tuner  
Done  
Back  
Record Show  
Press 4to change settings.  
5
Press SETUP to exit  
4
TV  
10  
Done  
Back  
3. Press [o] or [p] to select “Tuner”, “AV1” or “AV2”.  
4. Press [ENTER] (or [a]) to select “Done”.  
5. Press [ENTER].  
Press SETUP to exit  
The recording input source is selected.  
The screen returns.  
Examples:  
3. Press [o] or [p] to select the TV channel number.  
4. Press [ENTER] (or [a]) to select “Done”.  
Record Show  
Verify the settings. Press ENTER to edit.  
Start  
End  
5. Press [ENTER].  
The TV channel number is set.  
The screen returns.  
Example:  
Record Time  
Record Day  
Input Source  
TV  
21:30  
22:00  
2004/05/03  
Tuner  
10  
Record Mode  
Title  
SP  
Record Show  
20040503  
Verify the settings. Press ENTER to edit.  
Start  
End  
Press SETUP to exit  
Done  
Cancel  
Record Time  
Record Day  
Input Source  
TV  
21:30  
22:00  
2004/05/03  
Tuner  
12  
Record Show  
Record Mode  
Title  
SP  
Verify the settings. Press ENTER to edit.  
Start End  
20040503  
Record Time  
Record Day  
Input Source  
TV  
21:30  
22:00  
2004/05/03  
Press SETUP to exit  
Done  
Cancel  
AV1  
Record Mode  
Title  
SP  
20040503  
Press SETUP to exit  
Done  
Cancel  
4, 5, a, b  
ENTER  
-E35-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting “Record Mode”  
1. Select “Record Mode”.  
Example:  
Setting “Title”  
1. Select “Title”.  
Example:  
Record Show  
Record Show  
Verify the settings. Press ENTER to edit.  
Verify the settings. Press ENTER to edit.  
Start End  
Start  
End  
Record Time  
Record Day  
Input Source  
TV  
21:30  
22:00  
Record Time  
Record Day  
Input Source  
TV  
21:30  
22:00  
2004/05/03  
2004/05/03  
Tuner  
12  
Tuner  
12  
Record Mode SP  
Record Mode  
Title  
HQ  
Title  
20040503  
20040503  
Press SETUP to exit  
Done  
Cancel  
Press SETUP to exit  
Done  
Cancel  
2. Press [ENTER].  
2. Press [ENTER].  
“Title” screen appears.  
Example:  
“Quality” screen appears.  
Example:  
Record Show  
Record Show  
Press 4to change settings.  
5
Press ENTER to edit. The title is generated  
based on the date you set.  
4
Title  
20040503  
Done  
Back  
Quality  
SP  
Done  
Back  
5
Press SETUP to exit  
Press SETUP to exit  
3. Press [ENTER] again.  
“New Title” screen appears.  
3. Press [o] or [p] to select “HQ”, “SP”, “LP”, “EP” or “EP+”.  
(Please refer to “Setting Record Mode” on page E23.)  
Record Show  
4. Press [ENTER] (or [a]) to select “Done”.  
New Title :  
5. Press [ENTER].  
Record mode is set.  
The screen returns.  
Example:  
Delete  
Clear  
0
a
k
u
1
b
l
2
3
4
5
f
p
z
6
7
8
9
j
t
c
d
e
g
q
h
r
i
m
w
n
x
o
y
s
v
Space  
Done  
Back  
Record Show  
Verify the settings. Press ENTER to edit.  
Press SETUP to exit  
Start  
End  
Record Time  
Record Day  
Input Source  
TV  
21:30  
22:00  
2004/05/03  
4. Press the directional arrow button (a, b, o, p) to select the  
Tuner  
12  
letter or number.  
Record Mode HQ  
5. Press [ENTER].  
Title  
20040503  
Press SETUP to exit  
Done  
Cancel  
6. Repeat steps 4 and 5 to make a title name (up to 10  
characters).  
Note:  
If you make a mistake, select “Delete” or “Clear”, and press  
[ENTER].  
Delete:  
Every time [ENTER] is pressed, the last character of the  
title name is deleted.  
Clear:  
[ENTER] is pressed, the title name is cleared at once.  
7. Press [p] to select “Done”.  
Need help? Call  
1-800-813-3435  
-E36-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8. Press [ENTER].  
“Title” screen returns.  
The new title name appears.  
Example:  
Record List  
1. Select “Record List” in “Menu” screen.  
(See pages E22 and E33.)  
Record Show  
Menu  
Press ENTER to edit. The title is generated  
based on the date you set.  
Play/Edit Disc  
Record Program  
Setup Menu  
Record Status  
4
Title  
love  
Done  
Back  
Record List  
b
2. Press [ENTER] (or [a]).  
Press SETUP to exit  
“My Record List” screen appears.  
Example:  
9. Press [a] to select “Done”.  
My Record List  
Start Source  
Title  
Iove  
Date  
10. Press [ENTER].  
The screen returns.  
Example:  
2004/05/03  
2004/05/01  
2004/05/10  
21:30 CATV 012  
b
CATV 010 5  
news  
17:05  
the king  
10:00 CATV 024  
Record Show  
Verify the settings. Press ENTER to edit.  
Start  
End  
Record Time  
Record Day  
Input Source  
TV  
21:30  
22:00  
2004/05/03  
Press SETUP to exit  
Tuner  
12  
If the list is correct...  
Record Mode  
Title  
HQ  
love  
•
Press [b] to return to the previous screen.  
•
Press [SETUP] to close the screen.  
Press SETUP to exit  
Done  
Cancel  
If you want to delete or edit it...  
1) Press [o] or [p] to select the program in the list.  
2) Press [ENTER].  
11. After all settings are completed, press [p] to select “Done”.  
Note:  
If you want to cancel it, select “Cancel”, and then press  
[ENTER].  
A message appears on the screen.  
Example:  
My Record List  
12. Press [ENTER].  
Title  
Iove  
ne
Date  
S,Th  
Title:news  
Select Edit to change the settings.  
Start Source  
If a disc is not loaded, a message “Please insert disc.” screen  
appears. Press [ENTER] again.  
“Menu” screen returns.  
21:30  
CATV 012 4  
b
5  
th
Select Delete to delete the show  
from My Record List.  
If a message appears...  
Delete  
Edit  
Examples:  
•
•
“Record time in the past”  
“Program Overlapped ...”, etc.  
Press SETUP to exit  
Do one of the followings:  
Delete:  
1. Select “Delete”.  
In these cases, please follow the instructions displayed on the  
TV screen.  
2. Press [ENTER]. The confirmation screen appears.  
3. Select “Confirm”.  
4. Press [ENTER]. “My Record List” screen returns.  
Edit:  
1. Select “Edit”.  
2. Press [ENTER]. “Edit My Record List” screen appears.  
3. Edit the items again. (Please refer to “Setting Record  
Time” ~ “Setting Title” on pages E33 ~ E36.) “My  
Record List” screen returns.  
SETUP  
4, 5, a, b  
3) Press [b] to return to the previous screen.  
ENTER  
•
Press [SETUP] to close the screen.  
-E37-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DISC INFORMATION  
Recordable Discs  
The following types of discs can be recorded on this unit.  
Playable Discs  
The following types of discs can be played on this unit.  
Disc type and logo mark  
Disc type and logo mark  
DVD+RW  
DVD+R  
DVD-Video  
TM  
DVD+RW  
We recommend the discs as shown below.  
DVD+RW:  
DVD+R  
Rewritable disc  
You can re-record/erase the disc approximately 1,000 times.  
CMC (2.4x)  
Infodisc (2.4x)  
Audio CD  
CAUTION:  
Mitsubishi (2.4x/4x)  
Optdisc (2.4x)  
Prodisc (2.4x)  
Ritek (2.4x)  
Moser Bare India (2.4x)  
Philips (2.4x/4x)  
Richo (2.4x/4x)  
Melody (2.4x)  
•
Only the above types of discs can be played on this unit.  
DVD-RAM, DVD-ROM, CD-ROM, SVCD, CVD, VCD, etc.  
cannot be played.  
DVD+R:  
Non-rewritable disc, record-once medium  
CMC (2.4x/4X)  
Mitsubishi (2.4x/4x)  
Richo (2.4x/4x)  
DAXON (4x)  
Prodisc (2.4x)  
Taiyo Yuden (4x)  
•
•
Some DVD+R/DVD+RWs cannot be played back depending  
on the recording conditions.  
This unit can play back the DVD-R that has recorded movie  
data as well. However, some DVD-Rs cannot be played back  
depending on the recording conditions.  
CAUTION:  
•
Only the above types of discs can be recorded on this unit.  
DVD-RAM, DVD-RW, DVD-R, DVD-ROM, CD-ROM, SVCD,  
CVD, VCD, CD-R, CD-RW, Audio CD, etc. cannot be  
recorded.  
Fingerprints and small scratches on a disc can affect recording  
and/or playback performance. Please take proper care of  
your discs.  
In some cases, you may not be able to add new recordings to  
DVD+RWs that contain recordings made on other DVD  
Recorders or PCs.  
To play a recorded disc on other DVD equipment, you need  
to finalize the disc. See page E57.  
If the disc contains PC data unrecognized by this unit, the  
data will be erased.  
When repeat opening/closing the disc tray and add new  
recording on the DVD+R disc, the disc can be added new  
recording up to 30 times.  
When a data is erased from a DVD+R, that space does not  
become available. Once an area on a DVD+R is recorded on,  
that area is no longer available for recording, whether the  
recording is erased or not.  
•
•
The DVD-R that has no movie data cannot be played back.  
The DVD-RW (Video mode) can be played back. However,  
some DVD-RWs cannot be played back depending on the  
recording conditions. The DVD-RW (VR mode) cannot be  
played back.  
•
•
•
•
Uncompatible DVD discs cannot be played back.  
Unfinalized DVD+R discs cannot be played back. However,  
some (finalized) DVD+Rs cannot be played back depending  
on the recording conditions.  
•
This unit is to be used exclusively with the NTSC color  
system. PAL and SECAM system discs cannot be used with  
this unit.  
•
•
•
•
•
For MP3 CD, please see page E51.  
For Picture/JPEG CD, please see pages E53 and E54.  
This product incorporates copyright protection technology that  
is protected by method claims of certain U.S. patents and other  
intellectual property rights owned by Macrovision Corporation  
and other rights owners. Use of this copyright protection  
technology must be authorized by Macrovision Corporation,  
and is intended for home and other limited viewing uses only  
unless otherwise authorized by Macrovision Corporation.  
Reverse engineering or disassembly is prohibited.  
•
Unrecordable pictures  
Pictures with copy protection cannot be recorded on this unit.  
When the unit receives a copy guard signal while recording, the  
unit cannot record correctly.  
Important Note:  
SANYO takes no responsibility for recording failure due to  
power cuts, defective discs, or damage to the unit, etc.  
-E38-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Region Number (DVD-Video disc only)  
Region number (Regional restriction code) is built-in to the unit  
and DVD-Video discs.  
Handling, Storing and Cleaning Discs  
•
•
•
Fingerprints and dust should be carefully wiped from the  
signal surface of the disc (glossy side) with a soft cloth.  
Wipe in a straight motion from the center to the outside of  
the disc.  
Never use chemicals such as record cleaning sprays,  
antistatic sprays or fluids, benzene or thinner to clean the  
discs. These chemicals will permanently damage the plastic  
surface of the disc.  
Region number “1” or “ALL” of DVD-Video discs can be used on  
this unit.  
ALL  
1
DVD-Video Disc  
DVD-Video discs are divided into titles, and the titles are sub-  
divided into chapters.  
To remove a disc from its storage case, press down on the  
center of the case and lift the disc out, holding it carefully by  
the edges.  
Title 1  
Title 2  
•
•
Discs should be returned to their cases after use to protect  
them from dust and scratches.  
To prevent warping the disc, do not expose it to direct  
sunlight, high humidity or high temperatures for extended  
periods of time.  
Chapter 1  
Chapter 1 Chapter 2  
Chapter 2 Chapter 3  
There are the marks on some DVD-Video disc package.  
Example:  
•
Do not apply paper or write anything on either side of the  
disc. Sharp writing instruments, or the inks used in some  
felt-tip pens, may damage the surfaces of the disc.  
Multiple languages  
3
2
Multi-language subtitles  
Multi-angle  
16:9 LB  
1
Multi-aspect  
Region number  
Closed caption  
Audio CD Disc  
Audio CD discs are divided into tracks.  
Track 1  
Track 2  
Track 3  
Track 4  
Track 5  
Need help? Call  
1-800-813-3435  
-E39-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RECORDING  
When operation buttons are pressed, that operation is displayed  
Preparations  
•
on the TV screen. The display turns off after several seconds.  
This instruction manual explains the basic instruction of this  
unit using the remote control unit.  
•
Turn on the TV and select the video input source.  
Refer to your TV’s owner manual.  
Check that the disc has enough available space for recording.  
Set “Record Mode” and “Auto Chapter” (See pages E23 and  
E24).  
1. Press [POWER] to turn the power on.  
•
•
“SANYO” logo appears on the TV screen.  
“POWER ON” ---> “LOADING” ---> “NO DISC” appears  
on the FL display.  
•
•
•
Select “Stereo” in “MTS (Multi-channel TV Sound) Select” on  
page E21.  
2. Press [OPEN/CLOSE] to open the disc tray.  
“OPEN” appears.  
•
•
•
Do not touch the disc tray while it is moving.  
Never place anything except a disc on the disc tray. Foreign  
objects can damage the unit.  
Note:  
To open or close the disc tray, be sure to press [OPEN/  
CLOSE]. Do not press the disc tray with your hand.  
•
•
Do not apply excessive force to the disc tray.  
Only one disc must be placed on the disc tray at a time.  
3. Place a DVD+RW or DVD+R disc (label facing up) to be  
recorded on the disc tray.  
See “Recordable Discs” on page E38.  
POWER  
OPEN/CLOSE  
4. Press [OPEN/CLOSE] again to close the disc tray .  
Please wait until “CLOSE” ---> “DISC LOADING” ---> “STOP”  
disappears on the TV screen.  
•
•
•
•
If a blank disc is used for first time, “SANYO” logo screen  
remains.  
If the disc is recorded once before, a title menu screen  
may appear.  
“DVD RW” (or “DVD”) and “SP” (or “HQ”, “LP”, “EP” or  
“EP+”) appear on the FL display.  
Blank DVD+RWs may take a while longer before “STOP”  
disappears on the TV screen.  
5. Press [REC MODE] to select the Record Mode (“HQ”, “SP”  
“LP”, “EP” or “EP+”).  
For more details, please refer to “Setting Record Mode”  
on page E23.  
REC MODE  
Need help? Call  
1-800-813-3435  
-E40-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To pause recording  
Recording TV Programs  
Press [k] during recording.  
•
Before pressing [TV], select the Record Mode (“HQ”, “SP”  
“LP”, “EP” or “EP+”) first. See the previous page.  
•
“RECORDING PAUSE” appears on the TV screen.  
Press it again to restart recording.  
1. Press [TV] to receive the TV program.  
To stop recording  
Press [n] during recording.  
“MONITOR” appears briefly on the TV screen.  
Please wait until “CLOSING...” ---> “PLEASE WAIT...” --->  
“STOP” disappears on the TV screen.  
Note:  
It takes a while to complete closing the disc. You may not watch  
TV program while closing.  
2. To select the channel, do one of the following:  
•
•
Press [CHANNEL] + or -.  
Press the number button(s).  
Examples:  
To select Channel 6: Press [6].  
To select Channel 12: Press [1] and [2].  
To select Channel 110: Press [1], [1] and [0].  
A title menu screen appears on the TV screen.  
The channel number appears on the FL display.  
•
•
The TV program is recorded on the disc.  
The additional recording information is also stored on the  
disc.  
3. Press [RECORD m] (or [m REC] on the unit) to start recording.  
•
“RECORDING” appears briefly on the TV screen.  
While picture is frozen there is no recording until picture is  
moving again. Please wait until recording starts.  
Elapsed recording time appears on the TV screen.  
The REC indicator lights.  
Example:  
Record mode  
The beginning of the  
TV recording screen  
Disc name  
•
•
Disc remaining time  
Example (FL display):  
Total title  
number  
SP Remain 01:56:35  
Disc: Untitled Disc  
RW  
CH  
REC  
SP  
01 Titles  
Channel number  
Elapsed recording time  
01 Untitled  
03:25 SP  
05/01/04  
Recording continues until you stop the recording or the disc  
is full.  
Note:  
Press [DISPLAY] repeatedly until the elapsed recording time  
disappears on the TV screen, if necessary.  
Title number and Title name  
Record time and Record mode  
Record date  
Notes:  
•
You cannot change the channel or record mode during  
recording.  
•
•
The record time is estimate and actual time may differ.  
Recording makes on open space on the disc. Data will not be  
overwritten.  
•
•
You can record up to 48 programs on one disc (Maximum  
360 minutes for continuous recording of one program).  
You cannot record a program with copy-protection.  
To record TV program again, repeat steps 1 ~ 3 on the left  
column.  
k (Pause)  
To play back the disc, see page “DISC PLAYBACK” on page  
E44.  
n (Stop)  
Note:  
To turn off the power, press [POWER]. The clock appears on the  
FL display. If the timer recording is set, “0” appears.  
Number  
buttons  
DISPLAY  
TV  
– CHANNEL +  
REC MODE  
RECORD m  
Need help? Call  
1-800-813-3435  
-E41-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To watch another TV while recording  
Press [TV/DVD] repeatedly to select “ANTENNA SOURCE TV”  
on the TV screen.  
Recording stereo program and SAP (Second Audio  
Program)  
1. Select the recording sound.  
•
“TV” appears on the FL display.  
1) Select “Stereo”, “SAP” or “MONO” in “MTS Select”.  
See “MTS (Multi-channel TV Sound) Select” on page  
E21.  
Use your original TV remote control to select the channel on your  
TV.  
2) Press [AUDIO] to select “LEFT”, “RIGHT” or “STEREO”  
Note:  
on the TV screen.  
If you do not want to watch TV while recording, you can turn off  
the TV. If using a cable box, make sure to leave it on.  
AUDIO select TV program Recording sound  
MTS select  
Stereo  
LEFT  
Mono  
Mono  
Stereo  
Mono  
Stereo  
Mono  
Stereo  
Mono  
Mono+SAP  
Stereo  
TV/DVD  
AUDIO  
Stereo+SAP  
Mono  
RIGHT  
Mono+SAP  
Stereo  
Stereo+SAP  
Mono  
STEREO  
Mono+SAP  
Stereo  
Stereo+SAP  
Mono  
Mono  
SAP  
SAP  
SAP  
LEFT  
RIGHT  
STEREO  
Mono+SAP  
Stereo  
Stereo+SAP  
Mono  
LEFT  
Mono  
Mono+SAP  
Stereo  
Stereo  
Mono  
Mono  
SAP  
Stereo+SAP  
Mono  
RIGHT  
Mono+SAP  
Stereo  
Stereo  
SAP  
Stereo+SAP  
Mono  
STEREO  
Mono  
Mono+SAP  
Stereo  
Stereo  
Mono  
Stereo+SAP  
2. Start recording.  
Need help? Call  
1-800-813-3435  
-E42-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Timer Recording  
Recording from an External Equipment (VCR,  
etc.)  
Note:  
This unit uses the International Time System (24-hour display).  
Therefore the unit does not have Daylight Saving Time (DST)  
function. You must set the clock when summer switches to winter  
and vice versa. See page E18.  
•
Connect a VCR or other equipment to the AV1 IN or AV2  
IN jacks first. See page E15.  
•
Select “Video” or “S-Video” in “AV Select” screen. See  
page E32.  
1. Set the program(s) first.  
1. Load the disc.  
(See “Record Status” on page E33. )  
2. Press [INPUT] repeatedly to select “VIDEO1 IN” or “VIDEO2  
IN” for the equipment you have connected.  
2. Open “My Record List” screen and confirm the program to be  
recorded. Make corrections if necessary.  
(See “Record List” on page E37. )  
Example:  
•
“VIDEO1” or “VIDEO2” appears on the FL display.  
3. Start playback on the other equipment.  
My Record List  
Start Source  
4. Press [RECORD m] at the point you want to start recording.  
Title  
Iove  
Date  
Recording starts.  
2004/05/03  
2004/05/01  
2004/05/10  
21:30 CATV 012  
b
CATV 010 5  
news  
17:05  
the king  
10:00 CATV 024  
To pause recording  
Press [k]. Press it again to restart recording.  
To stop recording  
Press [n].  
For more details, see page E41.  
Press SETUP to exit  
CAUTION:  
3. Press [SETUP] to close “My Record List” screen.  
Almost all videos and DVD softwares on sale have a copy-  
protection. You cannot record them using this unit.  
Video Games cannot be recorded.  
4. Press [POWER] to turn the power off.  
Recording standby mode is set.  
•
The present time and “0” appear on the FL display.  
•
•
When the timer ON time arrives, the power turns on  
automatically and recording starts.  
When the timer OFF time arrives, the power turns off  
automatically and it is set to the standby mode.  
POWER  
Notes:  
INPUT  
•
If there is not enough space on the disc, as much of the  
SETUP  
program as possible will be recorded on the disc.  
Be sure to check and/or change the disc after every timer  
recording has been completed.  
•
k (Pause)  
n (Stop)  
RECORD
m  
Need help? Call  
1-800-813-3435  
-E43-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DISC PLAYBACK  
•
When you use a TV with Progressive-scan capability and  
Important Note:  
connect it to the COMPONENT VIDEO OUT jacks of the  
unit (see page E11), you must select the PROGRESSIVE  
mode. (For more details, please refer to your TV’s owner  
manual.)  
•
This instruction manual explains the basic instruction of  
this unit using the remote control unit.  
•
Some DVD-Video discs have different functions that may  
not be explained in this instruction manual. You may need  
extra instructions. In this case, please follow the instructions  
displayed on the TV screen or jacket or case of the disc.  
Note:  
If you use a Conventional TV or non-progressive-scan  
TV, skip this section.  
•
•
If “  
” appears on the TV screen during operation, the  
operation is prohibited by the unit or the disc.  
For improvement, on-screen display subject to change  
without notice.  
1. Press [POWER] to turn on the power.  
2. In “NO DISC” mode, press and hold down [a] on the unit  
until “PROGRESSIVE TV” appears briefly on the TV  
screen.  
Preparations  
•
•
Please refer to “Preparations” on page E40.  
Turn on the TV and select the video input source.  
Refer to your TV’s owner manual.  
If you want to switch the setting back again, press  
and hold down [a] until “INTERLACE TV” appears  
briefly on the TV screen.  
•
Select the playback picture size according to the aspect ratio  
of the TV. (See “Setting TV Display” on page E30.)  
4:3 PS  
4:3 LB  
16:9 Wide  
Note:  
(Panscan)  
(Letterbox)  
In “PROGRESSIVE TV” mode, the closed caption may  
not appear on the TV screen.  
Progressive Scanning  
While interlaced scanning produces one frame of video in  
two fields, progressive scanning creates one frame in one  
field. Conventional interlaced scanning constitutes one  
second with 30 frames (60 fields), but progressive scanning  
constitutes it with 60 frames from scratch. Progressive  
scanning can reproduce sharper picture with high resolution  
for still image or other picture containing long texts or  
horizontal lines.  
Press [n] if you want to play back a DVD disc while the unit  
is receiving the TV program.  
This model has compliance with 525p (progressive) system.  
Interlaced scanning  
+
Progressive scanning  
Note:  
This handling description is printed prior to product development.  
When a part of the product specification must be changed to  
improve operability or other functions, priority is given to the  
product specification itself. In such instances, the instruction  
manual may not entirely match all the functions of the actual  
product.  
Need help? Call  
1-800-813-3435  
Therefore, the actual product and packaging, as well as the  
name and illustration, may differ from the manual.  
-E44-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
[DVD-Video]  
Press [a] (Play) to start playback.  
Basic Playback  
Notes:  
•
•
Elapsed playing time appears on the TV screen.  
If a menu screen appears on the TV screen...  
1) Press [o], [a], [p] or [b] (or the number buttons) to  
select the desired menu.  
•
•
Do not touch the disc tray while it is moving.  
Never place anything except a disc on the disc tray. Foreign  
objects can damage the unit.  
•
•
Do not apply excessive force to the disc tray.  
Only one disc must be placed on the disc tray at a time.  
2) Press [ENTER].  
Playback of the selected menu starts.  
Note:  
For more details, please refer to the jacket or case of the  
disc.  
When operation buttons are pressed, that operation is displayed  
on the TV screen. The display turns off after several seconds.  
1. Press [OPEN/CLOSE] to open the disc tray.  
Notes:  
•
•
•
Press [DISPLAY] repeatedly until the elapsed playing  
time disappears, if necessary. (See page E50.)  
In some discs, even if 4:3 PS is selected, the black bands  
may remain on the TV screen.  
If the disc is loaded with the label side downward (and it is a  
single sided disc), or if a badly scratched disc is loaded, “NO  
DISC” or “NO PLAY” appears on the TV screen. If this  
occurs, load the disc correctly or replace the disc.  
Note:  
To open or close the disc tray, be sure to press [OPEN/  
CLOSE]. Do not press the disc tray with your hand.  
2. Place the disc with the label facing up on the disc tray.  
See “Playable Discs” on page E38.  
Stopping Playback  
[DVD-Video][DVD+RW][DVD+R]  
or  
•
Press [n] once during playback.  
“PRESS PLAY TO CONTINUE” appears briefly on the TV  
screen.  
For 5-inch (12cm) disc  
For 3-inch (8cm) disc  
3. Press [OPEN/CLOSE] again to close the disc tray.  
Please wait until “CLOSE” ---> “DISC LOADING” ---> “STOP”  
disappears on the TV screen.  
When you press [a] (Play) again, playback starts automatically  
from the point where you stopped. “PLAY” appears briefly on  
the TV screen.  
•
Some discs may start playback automatically.  
Note:  
Some discs may not resume playback.  
4. Start playback.  
•
Press [n] twice during playback.  
“STOP” appears briefly on the TV screen and playback stops  
completely.  
When you press [a] (Play), playback starts from the beginning  
of the disc.  
[DVD+RW] [DVD+R]  
If a recorded DVD+RW or DVD+R disc is loaded, a title menu  
screen may appear.  
Example:  
SP Remain 01:00:03  
Disc: Untitled Disc  
04 Titles  
[CD]  
•
Press [n] once during playback. The unit stops completely.  
To turn off the power, press [POWER]. The clock appears on the  
FL display.  
01 Untitled  
03:25 SP  
05/01/04  
02 Untitled  
02:28 HQ  
05/01/04  
03 Untitled  
03:21 SP  
05/01/04  
OPEN/CLOSE  
1) Press [a] or [b] to select the title.  
2) Press [ENTER] (or [a] (Play)) to start playback.  
MENU  
TOP MENU  
•
Elapsed playing time appears on the TV screen.  
4, 5, a, b  
Example (FL display):  
ENTER  
RW TITLE  
CHP  
SP  
a (Play)  
n (Stop)  
e
f
SEARCH  
MODE  
Number  
buttons  
DISPLAY  
CLEAR  
-E45-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Selecting a Top Menu  
Title or Chapter Search  
1. Press [SEARCH MODE] once during playback or in the stop  
mode.  
Notes:  
•
•
The operation may differ depending on the disc used.  
Selecting a menu may not be possible on some discs.  
The title/chapter search screen appears on the TV screen.  
Example:  
1. Press [TOP MENU].  
TITLE 01 / 28 CHAPTER 015 / 035  
The menu screen will appear (if the disc contains it).  
2. Press [a] or [b] to select “TITLE” or “CHAPTER”.  
2. Press [4], [5], [b] or [a] (or the number buttons) to select the  
desired menu.  
3. Press the number button(s) to enter the title or chapter  
number.  
3. Press [ENTER].  
Examples:  
The selected menu playback starts.  
To select “3”, press [3].  
To select “10”, press [+10], then [0].  
To select “24”, press [+10], [+10], then [4].  
Selecting a DVD Menu  
The title or chapter number will be changed.  
Example:  
Notes:  
•
•
The operation may differ depending on the disc used.  
Selecting a menu may not be possible on some discs.  
TITLE 24 / 28 CHAPTER 015 / 035  
Note:  
1. Press [MENU].  
If you make a mistake, enter the title or chapter number  
again.  
The menu screen will appear.  
2. Press [4], [5], [b] or [a] (or the number buttons) to select the  
4. Press [a] (Play).  
desired menu.  
Playback starts from the selected title (or chapter).  
3. Press [ENTER].  
The selected menu playback starts.  
Time Search  
1. Press [SEARCH MODE] twice during playback.  
The time search screen appears on the TV screen.  
Example:  
Chapter (Track) Skip  
TITLE 01 / 02 TIME -- : -- : --  
2. Press the number button(s) to enter the time.  
Examples:  
3 minutes 40 seconds:  
Press [0], [0], [0], [3], [4], then [0].  
20 minutes 5 seconds:  
Press [0], [0], [2], [0], [0], then [5].  
42 minutes 39 seconds:  
Press [0], [0], [4], [2], [3], then [9].  
1 hour 4 minutes 35 seconds:  
Press [0], [1], [0], [4], [3], then [5].  
Press [e] or [f] during playback.  
e:  
Skip to the next chapter (or track).  
f:  
Skip back to the beginning of the previous chapter (or track).  
The information appears briefly on the TV screen.  
Example:  
TITLE 01 / 28 CHAPTER 016 / 035  
Note:  
If you make a mistake, enter the time again.  
Notes:  
•
You can skip only through the chapters, not over the title on  
the DVD-Video disc.  
“NEXT” or “PREVIOUS” may appear during CD playback.  
3. Press [a] (Play).  
Playback starts from the searched time.  
•
Note:  
The Search mode may not work on some discs.  
Need help? Call  
1-800-813-3435  
Important Note:  
If “  
” appears on the TV screen during operation, the  
operation is prohibited by the unit or the disc.  
-E46-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Time Search [CD]  
1. Press [SEARCH MODE] once during playback.  
“GOTO --:--” appears on the TV screen.  
Fast Playback  
During playback, press [c] or [d]. Each time the button is  
pressed, the playback speed changes as follows:  
[DVD-Video] [DVD+RW] [DVD+R]  
2. Press the number button(s) to enter the time.  
Example:  
c: Fast forward  
FF 2X v FF 4X v FF 6X v FF 8X (4 steps)  
d: Fast reverse  
2 minutes 5 seconds:  
Press [0], [2], [0], then [5].  
42 minutes 39 seconds:  
Press [4], [2], [3], then [9].  
FR 2X v FR 4X v FR 6X v FR 8X (4 steps)  
[CD]  
c: Fast forward  
FF 2X v FF 4X v FF 8X v FF 16X (4 steps)  
d: Fast reverse  
Playback starts from the searched time in the track.  
FR 2X v FR 4X v FR 8X v FR 16X (4 steps)  
Press [a] (Play) to return to normal playback.  
Track Search [CD]  
Press the number buttons during playback or in the stop mode.  
Example:  
Note:  
The sound is muted during fast playback in DVD.  
To select Track No. 3, press [3].  
To select Track No. 10, press [+10], then [0].  
To select Track No. 24, press [+10], [+10], then [4].  
Slow Motion Playback  
[DVD-Video] [DVD+RW] [DVD+R]  
Playback starts from the selected track.  
Press [SLOW  
] repeatedly to select the forward (or reverse)  
slow speed playback.  
SF 2X v SF 4X v SF 8X v SR 2X v SR 4X v SR 8X  
(Forward, 3 steps)  
(Reverse, 3 steps)  
Press [a] (Play) to return to normal playback.  
Note:  
The sound is muted during slow motion playback.  
Still Picture (Pause)  
Press [k] during playback.  
•
•
“PAUSE” appears on the TV screen.  
“k” appears on the FL display.  
k (Pause)  
a (Play)  
[DVD-Video] [DVD+RW] [DVD+R]  
Still picture mode  
[CD]  
d
c
SLOW  
Pause mode  
SEARCH  
MODE  
Press [a] (Play) to return to normal playback.  
Number  
buttons  
Note:  
The sound is muted during still picture.  
Frame by Frame Advance Playback  
[DVD-Video] [DVD+RW] [DVD+R]  
Press [k] during still picture.  
•
“STEP” appears briefly on the TV screen.  
Important Note:  
Each time the button is pressed, the picture advances one frame.  
Press [a] (Play) to return to normal playback.  
If “  
” appears on the TV screen during operation, the  
operation is prohibited by the unit or the disc.  
Notes:  
•
•
The sound is muted.  
Frame playback is operated forward only.  
Need help? Call  
1-800-813-3435  
-E47-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Picture Zoom  
Repeat Playback  
Press [ZOOM] during normal/slow playback or still picture.  
The central part of the picture is magnified, and “ZOOM X 1.5”  
appears on the TV screen.  
Press [REPEAT] during playback (or programmed playback) of  
the title (or track) you want to repeat.  
Each time the button is pressed, the repeat mode will be changed  
as follows.  
•
Each time you press [ZOOM], the zoom mode will be changed  
as follows:  
[DVD-Video] [DVD+RW] [DVD+R]  
CHAPTER REPEAT ON/REP 1:  
Repeat of the chapter being played  
TITLE REPEAT ON/REP ALL:  
Repeat of the title being played  
REPEAT OFF:  
ZOOM X 1.5 vZOOM X 2 v ZOOM X 3 v ZOOM OFF  
•
Press [o], [a], [p] or [b] to change the zoom point.  
To return to the original screen, select “ZOOM OFF”.  
Normal playback mode  
Note:  
Picture Zoom may not work on some discs.  
[CD]  
REP-ONE/REP 1:  
Repeat of the track being played  
REP-ALL/REP ALL:  
Repeat all tracks  
Viewing from a Desired Camera Angle  
(Multi-Angle) [DVD-Video]  
REPEAT OFF:  
Normal playback mode  
Designated Range Repeat Playback  
(A-B Repeat)  
Some DVD-Video discs may contain scenes which have been  
shot simultaneously from a number of different camera angles.  
The jacket or case of discs that are recorded with angles will be  
marked.  
Point A  
Point B  
Example:  
3
Note:  
The recorded angles differ depending on the disc used.  
1. Press [A-B] during playback at the beginning of the section  
you want to repeat (Point A).  
1. Play the disc that is recorded with angles.  
•
•
“A TO B SET A” appears briefly on the TV screen.  
“REP A” appears on the FL display.  
2. Press [ANGLE] repeatedly until the desired angle appears.  
•
If “Angle Mark” is set to “ON” (see page E26), the angle  
mark apperas on the TV screen.  
Example:  
2. Press [A-B] again at the end of the section you want to repeat  
(Point B).  
[DVD-Video] [DVD+RW] [DVD+R]  
“A TO B REPEAT ON” appears briefly on the TV screen.  
[CD]  
3
“A TO B SET B” appears briefly on the TV screen.  
•
“REP A-B” appears on the FL display.  
The section between points A and B is played repeatedly.  
ANGLE  
3. To return to normal playback, press [A-B] again.  
•
“A TO B CANCELLED” appears briefly on the TV screen.  
REPEAT  
A-B  
Note:  
Repeat playback or A-B repeat playback mode may not work  
correctly with some discs.  
4, 5, a, b  
ZOOM  
Need help? Call  
1-800-813-3435  
Important Note:  
If “  
” appears on the TV screen during operation, the  
operation is prohibited by the unit or the disc.  
-E48-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Selecting Subtitle Language  
This operation works only with discs on which multiple subtitle  
languages are recorded.  
Press [SUBTITLE] repeatedly during playback until the desired  
subtitle language appears on the TV screen.  
Example:  
SUBTITLE  
AUDIO  
SUBTITLE 01/03 : ENGLISH  
After a few seconds, it disappears.  
Notes:  
•
•
In some cases, the subtitle language is not changed to the  
selected one.  
When a disc supporting closed caption is played, the subtitle  
and the closed caption may overlap each other on the TV  
screen. In this case, turn the subtitle off.  
•
•
•
•
When the desired language is not selected even if the button  
is pressed, the language is not available on the disc.  
When the power is turned on or the disc is replaced, select  
the subtitle language again.  
If the subtitle language is not necessary, press [SUBTITLE]  
to select “SUBTITLE OFF”.  
Please refer to “Setting Subtitle" on page E26.  
Selecting Audio Soundtrack Language  
(Multi-Language)  
This operation works only with discs on which multiple audio  
soundtrack languages are recorded.  
Press [AUDIO] repeatedly during playback until the desired  
language appears on the TV screen.  
Examples:  
AUDIO 1/4:DOLBY D 2CHENGLISH  
AUDIO 2/4:DTS 5.1ENGLISH  
(If using an amplifier with DTS Decoder, the DTS sound will  
be heard. See page E13 for the amplifier connection.)  
Notes:  
•
•
•
When the desired language is not selected even if the button  
is pressed, the language is not available on the disc.  
When the power is turned on or the disc is replaced, select  
the language again.  
If the language is not recorded on the disc, only the available  
language on the disc will be heard.  
Notes on Audio CD playback  
Changing the audio channel output  
During Audio CD playback, press [AUDIO] to select an audio  
channel (“LEFT”, “RIGHT”, or “STEREO”).  
Important Note:  
If “  
” appears on the TV screen during operation, the  
operation is prohibited by the unit or the disc.  
Need help? Call  
1-800-813-3435  
-E49-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Shuffle Playback [CD]  
To Check the Disc Playing Time  
Press [DISPLAY] during playback.  
Each time the button is pressed, the various playing times will  
appear on the TV screen.  
1. Press [SHUFFLE] in the stop mode.  
•
•
“SHUFFLE ON” appears briefly on the TV screen.  
“SHUFF” appears on the FL display.  
Examples (DVD-Video, DVD+RW, DVD+R):  
TITLE 01/02 CHAPTER 015/035  
2. Press [a] (Play) to start shuffle playback.  
The unit will automatically select tracks at random.  
00 : 50 : 09  
Note:  
TITLE REMAIN (Title remaining playing time)  
01 : 10 : 20  
To stop shuffle playback, press [n], and then press [SHUFFLE].  
“SHUFFLE OFF” appears briefly on the TV screen.  
CHAPTER ELAPSED (Chapter elapsed playing time)  
00 : 01 : 25  
Programmed Playback [CD]  
Up to 99 selections can be programmed.  
CHAPTER REMAIN (Chapter remaining playing time)  
00 : 01 : 34  
Programming procedure  
1. Press [PROG] in the stop mode.  
Released  
•
•
“PROGRAM P00:00” appears on the TV screen.  
“PROG” appears on the FL display.  
Examples (CD):  
SINGLE ELAPSED (Track elapsed playing time)  
00 : 00 : 54  
2. Press the number buttons to select the track number.  
Examples:  
To select Track No.3, press [3].  
To select Track No.10, press [+10], then [0].  
To select Track No.24, press [+10], [+10], then [4].  
SINGLE REMAIN (Track remaining playing time)  
00 : 02 : 59  
TOTAL ELAPSED (Disc elapsed playing time)  
00 : 01 : 05  
Example:  
PROGRAM P01:03  
(The Track No.3 is set to the first programmed number.)  
TOTAL REMAIN (Disc remaining playing time)  
00 : 45 : 34  
Note:  
If you make a mistake, press [CLEAR].  
OFF (Released)  
3. Repeat step 2 as above to select other tracks.  
Press [DISPLAY] repeatedly until all playing times disappear.  
Examples:  
PROGRAM P02:10  
PROGRAM P03:24  
4. Press [a] (Play) to start programmed playback.  
When all programmed selections have been played, the unit  
stops automatically.  
SHUFFLE  
•
The programmed contents are retained in memory.  
If [a] (Play) is pressed again, programmed playback  
starts.  
PROG  
Note:  
n (Stop)  
To cancel the program, press [PROG] (“PROGRAM P00:00”  
appears) in the stop mode, and then press [n].  
a (Play)  
Number  
buttons  
DISPLAY  
CLEAR  
Need help? Call  
1-800-813-3435  
Important Note:  
If “  
” appears on the TV screen during operation, the  
operation is prohibited by the unit or the disc.  
-E50-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MP3 CD OPERATION  
Before Starting  
MP3 CD Playback  
This unit can play back the CD that has recorded music data,  
MP3 files.  
1. Load the disc with the label facing up on the disc tray.  
(Please refer to “Basic Playback” on page E45.)  
•
•
The file system is ISO9660 Level 1 and Level 2.  
It would take 30 seconds or more for this unit to read MP3  
files depending on its structure.  
•
“SmartNAVI” screen appears.  
SmartNAVI  
•
•
This unit can recognize up to 999 files or folders per disc. The  
CD with 1000 files or folders and over is not available to this  
unit.  
MP3 CDs may not be played in the recorded order.  
1. Please use the MP3 software with the function that can  
record data alphabetically or numerically.  
2. Please refrain from making many sub-folders by  
preference.  
0
1
2
3
4
5
6
ROOT  
DIR_S001  
DIR_S002  
DIR_S003  
MUSIC001  
MUSIC002  
MUSIC003  
Enter  
However, some CD-R/RWs cannot be played back depending  
on the recording conditions.  
Before playing back MP3 files, please read the following.  
2. Press [p] or [o] to select the folder or file, and press [ENTER].  
•
•
•
If the folder is selected, the file menu of the selected  
folder appears.  
If the file is selected, the selected file playback starts  
(“Play” appears briefly on the TV screen).  
Number buttons can be used for selecting the file.  
Examples:  
MP3 CD  
•
•
MP3 files must have the extension letters, “.MP3” or “.mp3”.  
Standard, sampling frequency, and the bit rate:  
MPEG-1 Layer 3  
To select No.3, Press [3].  
To select No.10, press [+10], then [0].  
To select No.24, press [+10], [+10], then [4].  
44.1kHz, 48kHz  
56kbps ~ 320kbps (constant bit rate)  
The recommended recording setting for a high-quality sound  
is 44.1kHz of sampling frequency and 128kbps of constant  
bit rate.  
•
3. Repeat step 2 to select the file in the folder, if necessary.  
Note:  
LIMITATIONS ON DISPLAY  
If the disc is loaded with the label side downward, or if a badly  
scratched disc is loaded, “NO DISC” or “NO PLAY” appears on  
the TV screen. If this occurs, load the disc correctly or replace the  
disc.  
Available letters for display are the following: numbers of 0  
through 9, and capital alphabets of A through Z.  
CAUTION:  
•
Some MP3 CDs cannot be played back depending on the  
recording conditions.  
The CD has no music data or non-MP3 files cannot be played  
back.  
Stopping Playback  
Press [n] during playback.  
•
“Stop” appears briefly on the TV screen.  
•
•
The WMA files cannot be played back.  
Customers should also note that permission is required in  
order to download MP3 fils and music from the Internet.  
SANYO has no right to grant such permission. Permission  
should always be sought from the copyright owner.  
Need help? Call  
1-800-813-3435  
Important Note:  
If “  
” appears on the TV screen during operation, the  
operation is prohibited by the unit or the disc.  
-E51-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Pause  
Press [k] during playback.  
•
•
“Pause” appears on the TV screen.  
“k” appears on the FL display.  
Note:  
The sound is muted.  
Press [a] (Play) (or [k]) to return to normal playback.  
REPEAT  
File Skip  
ENTER  
Skipping forward  
5
Press [e] during playback to skip to the next file.  
“Next” appears briefly on the TV screen.  
k (Pause)  
n (Stop)  
e
f
Skipping backward  
Press [f] during playback to skip back to the previous file.  
“Previous” appears briefly on the TV screen.  
a (Play)  
Number  
buttons  
Repeat Playback  
Press [REPEAT] in the stop mode.  
Each time the button is pressed, the repeat mode will be changed  
as follows.  
DISPLAY  
Rep-one  
Disc Repeat  
Folder Repeat  
Repeat off  
To Check the Elapsed Playing Time  
Press [DISPLAY] during playback.  
Each time the button is pressed, various playing time appears.  
“File Elapsed” and elapsed playing time  
“File Remain” and remaining playing time  
“OFF”  
Need help? Call  
1-800-813-3435  
Important Note:  
If “  
” appears on the TV screen during operation, the  
operation is prohibited by the unit or the disc.  
-E52-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PICTURE DISC OPERATION  
4. Press [o], [a], [p] or [b] to move the cursor to the desired  
picture.  
To go to the next or previous thumbnail pictures, press  
[e] or [f].  
KODAK Picture CD Playback  
With KODAK Picture CD, it’s easy to turn film into pictures you  
can email from your PC and view on this unit!  
•
Just bring your film in for processing, and check the box for  
KODAK Picture CD. You’ll get back your prints and negatives as  
usual - plus you’ll get a special CD that contains your pictures  
along with software that lets you view, enhance, share, and print  
your pictures from your computer and view them on this unit.  
5. Press [ENTER] (or [a] (Play)) to start the slide show from the  
selected picture.  
•
If you press [k] during the slide show, the slide show  
stops temporarily. “PAUSE” appears.  
1. Press [OPEN/CLOSE] to open the disc tray.  
Press [a] (Play) (or [k]) again to resume the slide show.  
If the picture appears upside down, sideways, etc…  
Press [o], [a], [p] or [b] as follows:  
•
Note:  
To open or close the disc tray, be sure to press [OPEN/  
CLOSE]. Do not press the disc tray with your hand.  
a : Rotate it 90 degrees clockwise.  
b : Rotate it 90 degrees counterclockwise.  
o : Change it to the vertically reversed image picture.  
p : Change it to the mirror reversed image picture.  
If you press [e] or [f] during the slide show, it skips  
to the next picture or previous picture. “NEXT” or  
“PREVIOUS” appears briefly.  
2. Place the disc with the label facing up on the disc tray.  
•
•
To stop the slide show, press [n]. The thumbnail pictures  
appear.  
Notes:  
•
3. Press [OPEN/CLOSE] again to close the disc tray.  
Please wait until “CLOSE” ---> “DISC LOADING” ---> “STOP”  
disappears on the TV screen.  
If the disc is loaded with the label side downward, or if a badly  
scratched disc is loaded, “NO DISC” or “NO PLAY” appears  
on the TV screen. If this occurs, load the disc correctly or  
replace the disc.  
The file system is ISO9660 Level 1 and Level 2.  
This unit can recognize up to 999 files or folders per disc. The  
CD with 1000 files or folders and over is not available to this  
unit.  
The first thumbnail pictures (maximum 9-picture) appear on  
the TV screen.  
Example:  
•
•
•
•
FUJICOLOR CD cannot be used.  
Some discs cannot be played back depending on the recording  
conditions.  
•
It would take 30 seconds or more for this unit to read KODAK  
Picture CDs depending on its structure.  
KODAK and Picture CD are registered trademarks of Eastman  
Kodak Company.  
f
e
Need help? Call  
1-800-813-3435  
Important Note:  
If “  
” appears on the TV screen during operation, the  
operation is prohibited by the unit or the disc.  
-E53-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
JPEG CD Playback  
You can also view digital images from JPEG files on disc created  
by your computer.  
Picture Zoom  
1. Press [k] at the desired picture (KODAK Picture CD or JPEG  
CD).  
•
It would take 30 seconds or more for this unit to read the  
JPEG files depending on its structure.  
2. Press [ZOOM].  
•
Some JPEG files cannot be played back depending on the  
recording conditions.  
“ZOOM ON” appears briefly on the TV screen.  
3. Press [aa] or [bb] to select the desired picture size.  
1. Load the disc with the label facing up on the disc tray.  
(See the previous page.)  
•
To return to the original size, press [ZOOM] again.  
“ZOOM OFF” appears briefly on the TV screen.  
•
“SmartNAVI” screen appears.  
2. To select the file, do one of the following:  
•
•
Press the number button(s).  
Example:  
To select No.3, press [3].  
To select No.10, press [+10], then [0].  
To select No.24, press [+10], [+10], then [4].  
Press [p] (or [o]) to select the file, and press [ENTER].  
If the disc is mixed with MP3 and JPEG files…  
The files will be played back in alphabetical order.  
The slide show starts.  
•
If you press [k] during the slide show, the slide show  
stops temporarily. “PAUSE” appears.  
Press [a] (Play) (or [k]) again to resume the slide show.  
If the picture appears upside down, sideways, etc…  
Press [o], [a], [p] or [b] as follows:  
•
ENTER  
a : Rotate it 90 degrees clockwise.  
4, 5, a, b  
b : Rotate it 90 degrees counterclockwise.  
o : Change it to the vertically reversed image picture.  
p : Change it to the mirror reversed image picture.  
If you press [e] or [f] during the slide show, it skips  
to the next picture or previous picture. “NEXT” or  
“PREVIOUS” appears briefly.  
k (Pause)  
n (Stop)  
d
a (Play)  
•
e
f
c
ZOOM  
•
To stop the slide show, press [n].  
Notes:  
Number  
buttons  
•
If the disc is loaded with the label side downward, or if a badly  
scratched disc is loaded, “NO DISC” or “NO PLAY” appears  
on the TV screen. If this occurs, load the disc correctly or  
replace the disc.  
•
•
The file system is ISO9660 Level 1 and Level 2.  
This unit can recognize up to 999 files or folders per disc. The  
CD with 1000 files or folders and over is not available to this  
unit.  
•
•
JPEG resolution up to 5120 x 3840.  
Some discs cannot be played back depending on the recording  
conditions.  
Need help? Call  
1-800-813-3435  
Important Note:  
If “  
” appears on the TV screen during operation, the  
operation is prohibited by the unit or the disc.  
-E54-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EDITING  
Important Note:  
Check carefully before proceeding.  
•
You may need extra operations during this editing. If a  
message appears, please follow the instructions displayed  
on the TV screen.  
This unit may not be able to edit a disc if it was recorded on  
other DVD recorders or PCs.  
Play/Edit Titles  
1. Select “Play/Edit Titles”.  
•
•
Menu  
For improvement, on-screen display subject to change  
without notice.  
Play/Edit Disc  
Play/Edit Titles  
b
5
Record Program  
Setup Menu  
Edit Disc  
Preparations  
1. Load a DVD+RW or DVD+R disc (label facing up) to be  
edited, and then press [n] twice.  
(Please refer to “Basic Playback” on page E45.)  
Press SETUP to exit  
“SANYO” logo screen remains.  
2. Press [ENTER].  
2. Press [SETUP].  
“TITLE MENU” appears breifly on the TV screen.  
The title menu screen appears.  
Example:  
“Menu” screen appears on the TV screen.  
“Play/Edit Disc” is highlighted.  
Menu  
SP Remain 01:00:03  
Disc: Untitled Disc  
04 Titles  
Play/Edit Disc  
Record Program  
Setup Menu  
Play/Edit Titles  
Edit Disc  
a
5
01 Untitled  
03:25 SP  
05/01/04  
02 Untitled  
02:28 HQ  
05/01/04  
03 Untitled  
03:21 SP  
05/01/04  
Press SETUP to exit  
3. Press [ENTER] (or [a]) to select the sub menu.  
3. Press [a] or [b] to select the title first.  
Menu  
4. Press [EDIT].  
Play/Edit Disc  
Record Program  
Setup Menu  
Play/Edit Titles  
b
5
The edit screen appears.  
Edit Disc  
Disc: Untitled Disc  
04 Titles  
PLAY TITLE  
a
5
TITLE DELETE  
TITLE RENAME  
Press SETUP to exit  
01 Untit
03:25 S
05/01/0
Untitled  
:21 SP  
/01/04  
CANCEL  
4. Press [p] or [o] to select the item and go to the reference  
page.  
Play/Edit Titles ===> See the right column.  
Edit Disc  
===> See page E57.  
Notes:  
•
If it is not necessary, select “CANCEL”, and then press  
“ENTER”.  
Press [n] to close the screen.  
Notes:  
•
•
Once the DVD+R disc is finalized, you cannot edit or record  
on the disc.  
You may lose the edited contents if you remove the disc or a  
timer recording starts while editing.  
•
5. Press [p] or [o] to select the item.  
PLAY TITLE [DVD+RW] [DVD+R]  
1) Select “PLAY TITLE”.  
2) Press [ENTER].  
The selected title starts playback.  
Please refer to “DISC PLAYBACK” on page E44.  
Need help? Call  
1-800-813-3435  
-E55-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TITLE DELETE [DVD+RW]  
Note:  
TITLE RENAME [DVD+RW] [DVD+R]  
Note:  
Select the title first. See the previous page.  
Select the title first. See the previous page.  
1) Select “TITLE DELETE”.  
1) Select “TITLE RENAME”.  
Disc: Untitled Disc  
04 Titles  
Disc: Untitled Disc  
04 Titles  
PLAY TITLE  
PLAY TITLE  
4
TITLE DELETE  
TITLE DELETE  
a
4
5
TITLE RENAME  
TITLE RENAME  
a
01 Untit
03:25 S
05/01/0
Untitled  
:21 SP  
/01/04  
01 Untit
03:25 S
05/01/0
Untitled  
:21 SP  
/01/04  
5
CANCEL  
CANCEL  
2) Press [ENTER].  
2) Press [ENTER].  
A message appears.  
“Rename” screen appears.  
Disc: Untitled Disc  
Disc: Untitled Disc  
04 Titles  
04 Titles  
Rename  
Now: Untitled  
New:  
Please confirm the deletion of  
Delete  
Clear  
Untitled  
01 U
titled  
SP  
1/04  
0
0
1
2
c
3
d
4
5
6
7
8
9
j
t
03:2
05/0
a
k
b
l
e
f
g
q
h
r
i
Yes  
No  
m
w
n
x
o
y
p
z
s
u
v
Space  
Done  
Back  
3) Press [b] to select “Yes”.  
3) Press the directional arrow button (a, b, o, p) to select  
the letter or number.  
4) Press [ENTER].  
The character appears in the box.  
5) Repeat steps 3) and 4) to make the new title name (up to  
10 characters).  
Note:  
If it is not necessary, select “No”, and then press [ENTER].  
4) Press [ENTER].  
Please wait until “PLEASE WAIT...” disappears on the  
TV screen.  
• The title menu (with “DELETED”) screen returns.  
Note:  
If you make a mistake, select “Delete” or “Clear”, and  
press [ENTER].  
Delete:  
Every time [ENTER] is pressed, the last character of  
the title name is deleted.  
Clear:  
SETUP  
[ENTER] is pressed, the title name is cleared at once.  
4, 5, a, b  
6) Press [p] to select “Done”.  
7) Press [ENTER].  
ENTER  
Please wait until “PLEASE WAIT...” disappears on the  
TV screen.  
n (Stop)  
• The title menu (with the new title name) screen returns.  
EDIT  
Need help? Call  
1-800-813-3435  
-E56-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Erase Disc [DVD+RW]  
You can erase all titles on the disc.  
Check carefully before proceeding.  
Note:  
1) Select “Erase Disc”.  
2) Press [ENTER].  
A message appears.  
If it is a title menu screen, press [n] twice.  
Edit Disc  
Disc Operations  
1. Select “Edit Disc” in “Menu” screen.  
(See page E55.)  
Format Disc  
Erase Disc  
Fina
4
Menu  
5
Please confirm the Erasing of this  
Disc. All titles will be permanently  
Play/Edit Disc  
Record Program  
Setup Menu  
Play/Edit Titles  
Edit Disc  
4
Ren
deleted.  
Pro
b
Yes  
No  
Press SETUP to exit  
3) Press [b] to select “Yes”.  
Press SETUP to exit  
Note:  
If it is not necessary, select “No”, and then press [ENTER].  
4) Press [ENTER] to start to erase.  
2. Press [ENTER].  
“Disc Operations” screen appears.  
Please wait until erasing is finished.  
• “Disc Operations” screen returns.  
Disc Operations  
Format Disc  
Erase Disc  
5
Finalize Disc [DVD+R]  
Finalize Disc  
Rename Disc  
Protect Disc  
After you finalize the disc, you can play the disc on other DVD  
players. It can be used as DVD-Video disc. However, this is  
not guaranteed.  
CAUTION:  
Press SETUP to exit  
After you finalize a DVD+R disc, you cannot edit or  
record on the disc. Finish all the editing before you  
start to finalize the disc.  
3. Press [p] or [o] to select the item.  
Format Disc [DVD+RW]  
You can delete all titles and create a blank disc.  
Make sure nothing important is left on the disc.  
1) Select “Finalize Disc”.  
2) Press [ENTER].  
A message appears.  
1) Select “Format Disc”.  
2) Press [ENTER].  
Disc Operations  
Format Disc  
A message appears.  
Erase Disc  
4
Disc Operations  
Fin
Please confirm the Finalizing of this  
Disc. You will notbe able to  
Ren
edit/add titles after finalize.  
Pro
Format Disc  
5
Erase Disc  
Yes  
No  
Fina
Please confirm the Formatting of  
this Disc. All titles will be  
Press SETUP to exit  
Ren
permanently deleted.  
Pro
Yes  
No  
3) Press [b] to select “Yes”.  
Note:  
Press SETUP to exit  
If it is not necessary, select “No”, and then press [ENTER].  
4) Press [ENTER] to start to finalize.  
3) Press [b] to select “Yes”.  
Please wait until finalizing is finished.  
• “Disc Operations” screen returns.  
Note:  
If it is not necessary, select “No”, and then press [ENTER].  
4) Press [ENTER] to start to format.  
Notes:  
Please wait until formatting is finished.  
• “Disc Operations” screen returns.  
•
•
•
This unit may not be able to finalize the disc if it was  
recorded on other DVD recorders or PCs.  
You do not need to finalize the disc again once the disc  
has been finalized with this unit.  
Depending on the condition of the disc, recording, or the  
unit, discs may not be played even if the discs are finalized.  
-E57-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Rename Disc [DVD+RW] [DVD+R]  
You can enter up to 10 characters for a disc name.  
Protect Disc [DVD+RW]  
You can protect a disc from accidental erasure or editing.  
1) Select “Rename Disc”.  
2) Press [ENTER].  
1) Select “Protect Disc”.  
2) Press [ENTER].  
“New Disc Name” screen appears.  
A message appears.  
Disc Operations  
Disc Operations  
New Disc Name :  
Format Disc  
Erase Disc  
Delete  
Clear  
Fina
Please confirm the Protect of this  
0
a
k
u
1
b
l
2
3
4
5
f
p
z
6
7
8
9
j
t
Disc.  
Ren
c
d
e
g
q
h
r
i
m
w
n
x
o
y
s
Pro
v
Space  
Yes  
No  
Done  
Back  
Press SETUP to exit  
Press SETUP to exit  
3) Press the directional arrow button (a, b, o, p) to select  
3) Press [b] to select “Yes”.  
the letter or number.  
Note:  
Note:  
If it is not necessary, select “No”, and then press [ENTER].  
4) Press [ENTER].  
If it is not necessary, select “Back”, and then press  
[ENTER].  
A message appears.  
4) Press [ENTER].  
Disc Operations  
The character appears in the box.  
5) Repeat steps 3) and 4) to make the new disc name (up to  
10 characters).  
Format Disc  
Erase Disc  
Fina
Updating disc information.  
Note:  
Please wait...  
Ren
If you make a mistake, select “Delete” or “Clear”, and  
press [ENTER].  
Pro
Delete:  
Every time [ENTER] is pressed, the last character of  
the disc name is deleted.  
Press SETUP to exit  
Clear:  
[ENTER] is pressed, the disc name is cleared at once.  
• “Disc Operations” screen returns.  
6) Press [p] to select “Done”.  
• “Protect Disc” is changed to “Unprotect Disc”.  
7) Press [ENTER].  
Disc Operations  
Please wait until “Rename disc. Please wait...” disappears.  
• “Disc Operations” screen returns.  
Format Disc  
Erase Disc  
Finalize Disc  
Rename Disc  
4
Unprotect Disc  
Press SETUP to exit  
5) Press [b].  
“Menu” screen returns.  
SETUP  
Menu  
4, 5, a, b  
Play/Edit Disc  
Record Program  
Setup Menu  
Play/Edit Titles  
4
ENTER  
Edit Disc  
b
Press SETUP to exit  
6) Press [SETUP] to close the screen.  
Note:  
When you unprotected the disc protected in the unit, select  
“Unprotect Disc” for procedure 1) above.  
Need help? Call  
1-800-813-3435  
You can record or edit on the disc.  
-E58-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUBLESHOOTING GUIDE  
If you have followed the instructions and are having difficulty operating the unit, locate the SYMPTOM in the left column below. Check  
the corresponding POSSIBLE CAUSE and CORRECTIVE ACTION columns to locate and remedy the problem.  
Power  
SYMPTOM  
POSSIBLE CAUSE  
CORRECTIVE ACTION  
The power cord is not connected.  
The power is not on.  
Insert the power plug into the AC wall outlet.  
Press the POWER button to turn the power on.  
No power.  
Operation  
SYMPTOM  
POSSIBLE CAUSE  
CORRECTIVE ACTION  
The unit must be reset.  
1. Disconnect the power cord.  
2. Connect the power cord again.  
3. Operate the unit.  
The operation or display is not normal.  
Picture  
SYMPTOM  
There is no picture.  
CORRECTIVE ACTION  
POSSIBLE CAUSE  
Connect the video cable into the jack.  
Select the correct input function on the TV.  
Load a disc. See page E45.  
The video cable is not connected.  
The TV is not set to receive signals from the unit.  
No disc is loaded.  
Select “INTERLACE” mode. See page E44.  
Clean the disc or replace it.  
“PROGRESSIVE” mode is set.  
The disc is dirty.  
The playback picture is poor.  
Screen size is wrong.  
Load a playable or recordable disc. See page E38.  
Refer to your TV’s owner manual.  
An unplayable disc is loaded.  
Incorrect aspect ratio setup on TV.  
Incorrect “TV Display” setting.  
Select the appropriate setting for your TV screen  
size. See page E30.  
The aspect ratio of the disc is fixed on your DVD  
“
” appears on the TV screen.  
The feature or action cannot be completed at this  
time because:  
The selected function does not operate on the disc  
now.  
• The operation is prohibited by the unit or the disc.  
• The feature is not available at the moment.  
• The DVD software restricts it.  
• The DVD software doesn’t support the feature  
(e.g., angles).  
See the antenna connections. See page E8.  
The antenna cable is not connected.  
TV channel is not selected.  
TV picture does not appear on the TV  
screen.  
• In “NO DISC” mode, (1) press the n button, (2)  
press the TV button, (3) and press the CHANNEL  
button (+ or -) or press the number buttons on the  
remote control.  
• Press the INPUT button to select the TV mode.  
• Press the TV/DVD button on the remote control to  
select the TV mode.  
RF signals are being divided between the unit and  
the TV. Use a signal booster. Please consult your  
A/V dealer.  
TV reception worsens after connect-  
ing the unit.  
RF signals are weak.  
Disconnect the playback equipment form the unit  
and connect it directly to your TV.  
The program contains copy protection signals that  
restricts copying.  
The playback picture or TV program  
from the equipment connected  
through the unit is distorted.  
-E59-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Sound  
SYMPTOM  
POSSIBLE CAUSE  
CORRECTIVE ACTION  
No sound.  
The TV is turned off.  
Turn on the TV.  
The audio cables are not connected.  
The audio equipment is turned off.  
The sound volume is low on some DVDs.  
Connect the audio cables into the jacks.  
Turn on the audio equipment connected with the  
audio cables.  
Adjust the volume control of your equipment.  
Low volume.  
Playback  
SYMPTOM  
POSSIBLE CAUSE  
CORRECTIVE ACTION  
The disc does not play.  
No disc is loaded.  
Load a playable disc. See page E45.  
A blank disc is loaded.  
Load a playable disc. See page E38.  
The disc is upside down.  
An unplayable disc is loaded.  
Load the disc with the labeled side facing up.  
• Load a playable disc. (Check the disc logo, type,  
color system, and region number.) See page E38.  
• When the disc was recorded on another DVD  
recorder, the unit cannot play if it was not  
finalized. However, the disc cannot be played  
back depending on the recording condition.  
“Parental” is set.  
Cancel the parental lock function or change the  
rating level. Reset it after play. See page E27.  
Recording/Timer Recording  
SYMPTOM  
POSSIBLE CAUSE  
CORRECTIVE ACTION  
An unrecordable disc is loaded.  
Load a DVD+RW or DVD+R disc. See page E38.  
Cannot record.  
The disc is upside down.  
Load the disc with the labeled side facing up.  
Release the function on the disc. See page E58.  
Load a new DVD+RW or DVD+R disc.  
The disc is set to “Protect Disc”.  
The disc space is not enough.  
The clock setting is not correct.  
Timer recording does not start.  
See “SETTING THE CLOCK” on page E18.  
The timer setting is not correct or overlapped with  
another setting.  
Set the Record Time correctly. See “Record Status”  
on page E33.  
The disc space is not enough.  
Load a new DVD+RW or DVD+R disc.  
SERVICING:  
Should this product require service, refer to the SANYO AUDIO/  
VIDEO limited warranty.  
If you do not have a convenient SANYO service station nearby,  
contact the SANYO dealer where you purchased the unit. Be sure  
to give the model number and explain the problem. The dealer will  
advise you how to obtain service.  
Need help? Call  
1-800-813-3435  
-E60-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MAINTENANCE  
Cleaning the cabinet  
WARNING:  
Use a clean soft cloth moistened with plain lukewarm water and  
wrung dry. Never use benzol, benzene or other strong chemical  
cleaners since these could damage the finish of your unit. It is  
important that no liquid reaches the inside of the unit.  
FOR YOUR PERSONAL SAFETY, BE SURE TO  
DISCONNECT THE AC POWER CORD BEFORE  
PROCEEDING WITH ANY MAINTENANCE OR CLEANING.  
SPECIFICATIONS  
Playable discs  
Outputs  
DVD+RW  
DVD+R  
DVD-VIDEO  
DVD-R (Video mode)  
DVD-RW (Video mode)  
Audio CD (CD-DA)  
MP3 CD  
COMPONENT VIDEO OUT:  
Y: 1.0 Vp-p (75 Ω)  
Pb: 0.7 Vp-p (75 Ω)  
Pr: 0.7 Vp-p (75 Ω)  
VIDEO: 1.0 Vp-p (75 Ω)  
S-VIDEO:  
Y: 1.0 Vp-p (75 Ω)  
C: 0.286 Vp-p (75 Ω)  
DIGITAL AUDIO:  
Optical & Coaxial  
AUDIO (L/R):  
JPEG CD  
Kodak Picture CD  
Recordable discs  
DVD+RW  
DVD+R  
2 V rms  
Video recording format  
DVD+RW Video Format  
Audio recording format  
MPEG Audio  
Inputs  
AV1 IN:  
VIDEO: 1.0 Vp-p (75 Ω)  
S-VIDEO:  
Recording time (DVD+RW, Version 1.2)  
Y: 1.0 Vp-p (75 Ω)  
C: 0.286 Vp-p (75 Ω)  
AUDIO (L/R): 2 V rms  
AV2 IN:  
HQ:  
Approx. 60 minutes  
SP (Standard mode): Approx. 120 minutes  
LP:  
EP:  
EP+:  
Approx. 180 minutes  
Approx. 240 minutes  
Approx. 360 minutes  
VIDEO: 1.0 Vp-p (75 Ω)  
S-VIDEO:  
TV system  
Y: 1.0 Vp-p (75 Ω)  
C: 0.286 Vp-p (75 Ω)  
AUDIO (L/R): 2 V rms  
Power requirements  
120 V AC, 60 Hz  
Power consumption  
28 Watts  
NTSC standard system  
Tuner channel range  
VHF: 2-13  
UHF: 14-69  
CATV: 1-125  
RF converter  
Built-in VHF converter  
Converter output  
Channel 3 or 4 selectable  
Time indication  
Dimensions (W x H x D)  
Approx. 16.9" x 2.3" x 14" (430 x 59 x 355 mm)  
Weight  
Approx. 8.1 lbs (3.7 kg)  
24-hour system  
Timer  
1 year/15-event programmable  
IMPORTANT INFORMATION  
Because its products are subject to continuous improvement, Sanyo reserves the right to modify product designs and specifications  
without notice and without incurring any obligation.  
-E61-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
For assistance in obtaining repairs and operational information, please contact the following Toll Free Number:  
DIAL TOLL FREE: 1-800-813-3435  
Weekdays: 7:30 AM - 4:00 PM Central Time  
Also, you may write to SANYO Manufacturing Corporation, 3333 Sanyo Road, Forrest City, Arkansas 72335.  
Limited Warranty  
LABOR 1 YEAR  
PARTS 1 YEAR  
CARRY-IN ONLY  
THIS WARRANTY IS VALID ONLY ON SANYO PRODUCTS PURCHASED FROM A WAL-MART STORE AND USED IN THE  
UNITED STATES OF AMERICA, EXCLUDING HAWAII AND ALL U.S. TERRITORIES AND PROTECTORATES. THIS WARRANTY  
APPLIES ONLY TO THE ORIGINAL RETAIL PURCHASER AND DOES NOT APPLY TO PRODUCTS USED FOR ANY  
INDUSTRIAL, PROFESSIONAL OR COMMERCIAL PURPOSE.  
Subject to the OBLIGATIONS and EXCLUSIONS below, SANYO Manufacturing Corporation (“SANYO”) warrants this SANYO  
product against defects in materials and workmanship for the periods of LABOR and PARTS specified above. SANYO will repair or  
replace (at its option) the product and any of its parts which fail to conform to this warranty with new or refurbished products or parts.  
The warranty period commences on the date the product was first purchased at retail from a Wal-Mart Store.  
OBLIGATIONS  
In order to obtain warranty service, the product must be delivered to and picked up from a Wal-Mart Store at the original retail  
purchaser’s expense. The original dated bill of sale, or sales slip from a Wal-Mart Store must be submitted to a Wal-Mart Store at  
the time warranty service is requested.  
EXCLUSIONS  
1. This warranty does not cover (A) the adjustment of customer-operated controls as explained in the appropriate model’s  
instruction manual, or (B) the repair of any product whose serial number has been altered, defaced or removed.  
2. This warranty shall not apply to the cabinet or cosmetic parts, broken or damaged video heads, batteries or routine  
maintenance.  
3. This warranty does not apply to uncrating, setup, installation, removal of the product for repair or reinstallation of the product  
after repair.  
4. This warranty does not apply to repairs or replacements necessitated by any cause beyond the control of SANYO including, but  
not limited to, any malfunction, defect or failure caused by or resulting from unauthorized service or parts, improper  
maintenance, operation contrary to furnished instructions, shipping or transit accidents, modification or repair by user or any  
third party, abuse, misuse, neglect, accident, incorrect line voltage, fire, flood or other Acts of God, or normal wear and tear.  
The foregoing is in lieu of all other express warranties and SANYO does not assume or authorize any party to assume for it any  
other obligation or liability.  
THE DURATION OF ANY WARRANTIES WHICH MAY BE IMPLIED BY LAW (INCLUDING THE WARRANTIES OF  
MERCHANTABILITY AND FITNESS) IS LIMITED TO THE TERM OF THIS WARRANTY. IN NO EVENT SHALL SANYO OR THE  
MANUFACTURER OF THE PRODUCT BE LIABLE FOR SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING  
FROM OWNERSHIP OR USE OF THIS PRODUCT, OR FOR ANY DELAY IN THE PERFORMANCE OF ITS OBLIGATIONS  
UNDER THIS WARRANTY DUE TO CAUSES BEYOND ITS CONTROL.  
SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS AND/OR DO NOT ALLOW  
THE EXCLUSION OR LIMITATION OF CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS AND EXCLUSIONS MAY  
NOT APPLY TO YOU.  
THIS WARRANTY GIVES YOU SPECIAL LEGAL RIGHTS. YOU MAY HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO  
STATE.  
R03/12/18 (M)  
For your protection in the event of theft or loss of this product, please keep the following information with a sales receipt in a safe place.  
Model No.  
Serial No.  
Date of Purchase  
Purchase Price  
Where Purchased  
SANYO Manufacturing Corporation  
-E62-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SANYO Electric Co., Ltd.  
Printed in China  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Quantum High Chair 600 XL User Guide
Radio Shack Telephone ET 3507 User Guide
Radio Shack TV Antenna 15 2160 User Guide
RCA Camcorder EZ 105 User Guide
Reliable Iron 424HAB User Guide
Rosen Entertainment Systems GPS Receiver GM series User Guide
Runco Projector VX 1000d User Guide
Sanyo Air Conditioner CH2422 User Guide
Scotsman Ice Ice Maker C0322 User Guide
Seagate Computer Drive STSHXD301TDB User Guide