Sanyo DVD Player DVD SL25 User Guide

INSTRUCTION MANUAL  
DVD Player  
DVD-SL25  
PICTURE  
z
/ON LAST MEMO  
PROGRAM  
OPEN/CLOSE  
MODE  
SURROUND  
ON SCREEN  
REPEAT A-B REPEAT  
ANGLE  
/RANDOM  
ZOOM  
ANGLE  
REPLAY  
SUBTITLE  
CHANGE  
SETUP  
MENU  
4
SUBTITLE  
ON/OFF  
ENT  
b
a
AUDIO TOP MENU  
RETURN  
5
REV SLOW  
FWD SLOW  
PAUSE/STEP  
PLAY  
PREV  
NEXT  
REV  
FWD  
CLEAR  
1
4
7
2
3
6
9
C
5
8
0
SEARCH  
MODE  
f
e
n
a
z/ON  
q
REMOTE CONTROLLER RB-SL25  
TM  
®
TM  
1AD6P1P1806-A  
(CA)  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Thissymbolindicatesthatdangerousvoltage  
constitutingariskofelectricshockispresent  
within this unit.  
CAUTION  
RISK OF ELECTRIC SHOCK  
DO NOT OPEN  
CAUTION: TO PREVENT THE RISK OF ELECTRIC  
SHOCK, DO NOT REMOVE COVER (OR BACK).  
NO USER-SERVICEABLE PARTS INSIDE.  
This symbol indicates that there are impor-  
tant operating and maintenance instructions  
in the literature accompanying this unit.  
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.  
WARNING: UNAUTHORIZED RECORDING OF COPY-  
RIGHTED MATERIAL MAY VIOLATE APPLICABLE  
COPYRIGHT LAWS. THE MANUFACTURER ASSUMES  
NO RESPONSIBILITY FOR UNAUTHORIZED DUPLICA-  
TION, USE OR OTHER ACTS WHICH INFRINGE UPON  
THE RIGHTS OF COPYRIGHT OWNERS.  
WARNING:TOPREVENTFIREORSHOCKHAZARD,  
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR  
MOISTURE.  
CAUTION - USE OF CONTROLS OR ADJUSTMENTS  
OR PERFORMANCE OF PROCEDURES OTHER THAN  
THOSESPECIFIEDHEREINMAYRESULTINHAZARD-  
OUS RADIATION EXPOSURE.  
THISUNITSHOULDNOTBEADJUSTEDORREPAIRED  
BY ANYONE EXCEPT PROPERLY QUALIFIED SER-  
VICE PERSONNEL.  
THIS CLASS B DIGITAL APPARATUS COMPLIES WITH  
CANADIAN ICES-003.  
Please Read This Manual.  
Because DVD is a new technology, we recommend that you read this manual carefully before connecting your DVD video  
player and operating it for the first time.  
Keep the manual in a safe place for future reference.  
IMPORTANT INFORMATION:  
To connect this unit to a TV, TV must have a set of Audio/Video composite input jacks (RCA-type). You cannot use an  
antenna terminal to connect this unit.  
To enjoy Dolby Digital sound  
For connection, see Connecting to an Amplifier with Dolby Digital Decoder, DTS Decoder or MPEG2 Decoder (Example  
4)on page E10.  
See Setting Digital Outin the INITIAL SETTINGS on page E29.  
Download from Www.Somanuals.c-oEm2. -All Manuals Search And Download.  
CONTROLS  
Front Panel  
8
7 6  
f
e
n
a
z/ON  
q
3
4
5
1
2
1. Disc tray  
2. Open/Close button (q)  
3. FL display  
5. Power button (z/ON)  
6. Play button (a)  
7. Stop button (n)  
4. Remote sensor (IR)  
8. Skip/Next/Previous buttons (f, e)  
FL Display  
1
2
3
4
5 6  
7
CD DVD LM  
3
D
ALL REP  
1
A–B  
PGM M P  
3
RND WMA  
12 11 10 9  
8
1. Play indicator (a)  
2. Pause indicator (k)  
3. CD indicator (CD)  
4. DVD indicator (DVD)  
8. Message or number indicators  
(Title, chapter, track, playing time or other information)  
9. MP3 indicator (MP3)  
10. WMA indicator (WMA)  
5. Last memory indicator (LM)  
6. Virtual Surround Sound indicator (3D)  
11. Random play indicator (RND)  
12. Program indicator (PGM)  
7. Repeat mode indicators (ALL, REP 1, A-B)  
Rear Panel  
1
2
3
4
COMPONENT VIDEO OUT  
Y
R
P
B
P
R
VIDEO OUT  
SELECT  
S
L
OPT.  
S-VIDEO OUT  
DIGITAL  
OUT  
COMPONENT  
AUDIO OUT  
VIDEO OUT  
6
5
1. S-Video output jack (S-VIDEO OUT)  
2. Video output select switch (VIDEO OUT SELECT)  
4. Optical digital output jack (DIGITAL OUT)  
5. Video output jack (VIDEO OUT)  
3. Component video output jacks (COMPONENT VIDEO OUT)  
6. Audio output jacks (AUDIO OUT)  
Download from Www.Somanuals.c-oEm3. -All Manuals Search And Download.  
REMOTE CONTROL  
Controls  
1. Power button (z/ON)  
1
2 3  
2. Last memory button (LAST MEMO)  
3. Picture mode button (PICTURE MODE)  
4. Open/Close button (OPEN/CLOSE)  
5. A-B repeat button (A-B REPEAT)  
6. Repeat button (REPEAT)  
7. Angle replay button (ANGLE REPLAY)  
8. Angle button (ANGLE)  
9. Menu button (MENU)  
10. Enter button (ENT)  
11. Return button (RETURN) (See page E24.)  
12. Directional arrow buttons (4, a, 5, b)  
PICTURE  
z/ON LAST MEMO  
OPEN/CLOSE  
MODE  
4
5
7
9
PROGRAM  
SURROUND  
/RANDOM  
REPEAT A-B REPEAT  
ANGLE  
33  
31  
29  
27  
26  
6
32  
30  
28  
ON SCREEN  
ZOOM  
ANGLE  
REPLAY  
SUBTITLE  
CHANGE  
8
SETUP  
MENU  
4
SUBTITLE  
ON/OFF  
10  
ENT  
b
a
AUDIO  
TOP MENU  
RETURN  
13. Forward slow button (FWD SLOW  
14. Pause/Step button (kPAUSE/STEP)  
15. Skip/Next button (NEXT e)  
16. Play button (aPLAY)  
)
5
11  
12  
14  
25  
22  
REV SLOW  
FWD SLOW  
24  
23  
21  
13  
15  
17  
PAUSE/STEP  
17. Forward button (FWD c)  
18. Clear button (CLEAR)  
19. Search mode button (SEARCH MODE)  
20. Number buttons (1 9, 0)  
21. Reverse button (REV d)  
22. Stop button (n)  
PREV  
NEXT  
16  
PLAY  
REV  
FWD  
CLEAR  
23. Skip/Previous button (PREV f)  
1
4
7
2
3
6
9
C
18  
19  
24. Reverse slow button (REV SLOW  
25. Top menu button (TOP MENU)  
26. Audio button (AUDIO)  
27. Subtitle On/Off button (SUBTITLE ON/OFF)  
28. Setup button (SETUP)  
)
0
5
8
20  
SEARCH  
MODE  
29. Subtitle change button (SUBTITLE CHANGE)  
30. Zoom button (ZOOM)  
31. On screen display button (ON SCREEN)  
32. Program/Random play button (PROGRAM/RANDOM)  
33. Surround sound button (SURROUND)  
Two AAbatteries  
(not supplied)  
Inserting batteries  
Remote control range  
1
2
Remote sensor  
f
e
n
a
q
z/ON  
Within approx. 23 feet (7 meters)  
Note:  
30°  
30°  
Remove the batteries if the remote control is not to be used for a  
month or more. Batteries left in the unit may leak and cause  
damage.  
PICTURE  
MODE  
z/ON LAST MEMO  
OPEN/CLOSE  
PROGRAM  
SURROUND /RANDOM REPEAT A-B REPEAT  
ANGLE  
ON SCREEN  
ZOOM  
ANGLE  
REPLAY  
MENU  
SUBTITLE  
CHANGE  
IMPORTANT NOTE:  
SETUP  
4
SUBTITLE  
ON/OFF  
ENT  
b
a
AUDIO TOP MENU  
RETURN  
5
REV SLOW  
FWD SLOW  
SPENT OR DISCHARGED BATTERIES MUST BE  
RECYCLED OR DISPOSED OF PROPERLY IN COMPLIANCE  
WITH ALL APPLICABLE LAWS.  
FOR DETAILED INFORMATION, CONTACT YOUR LOCAL  
COUNTY SOLID WASTE AUTHORITY.  
PAUSE/STEP  
PLAY  
PREV  
NEXT  
REV  
FWD  
CLEAR  
1
4
7
2
3
6
9
C
5
8
0
SEARCH  
MODE  
Download from Www.Somanuals.c-oEm4. -All Manuals Search And Download.  
BEFORE CONNECTION  
IMPORTANT INFORMATION:  
To connect this unit to a TV, TV must have a set of Audio/Video composite input jacks (RCA-type).  
You cannot use an antenna terminal to connect this unit.  
If your TV has only an antenna terminal, please purchase the TV with Audio/Video input jacks or the RF modulator.  
Do not connect the unit to a VCR directly. The playback picture will be distorted because DVD video discs are copy-  
protected.  
Please refer to the instruction manuals for the components that you are connecting (TV, AV amplifier, etc.).  
Choosing a Connection  
Does your TV have Audio/Video input jacks?  
x
Yes  
No  
Do you use an RF Modulator (not supplied)?  
No  
x Yes x  
See Connecting to a Conventional TV  
(Example 1)and Using RF Modulator”  
on pages E6 & E7.  
x
x
x
x
Please purchase the TV with Audio/Video input jacks or  
the RF Modulator.  
x
x
TV Connection  
Do you connect it to a Conventional  
TV?  
x Yes x  
See Connecting to a Conventional TV  
(Example 1)on page E6.  
No  
x Yes x  
Do you connect it to a TV with  
Progressive-scan Capability?  
See Connecting to  
Progressive-scan Capability (Example  
a
TV with  
2)on page E8.  
x
TV and Amplifier Connection  
x
x
x
x
x
x
x
x
x
x
x
See Connecting to a Conventional TV  
(Example 1)on page E6 or Connecting  
to a TV with Progressive-scan Capability  
(Example 2)on page E8.  
VIDEO Connection  
x
AUDIO  
Connection  
x Yes x  
x
Do you connect it to an Amplifier  
with Dolby Digital Decoder, DTS  
Decoder or MPEG2 Decoder?  
See Connecting to an Amplifier with  
Dolby Digital Decoder, DTS Decoder or  
MPEG2 Decoder (Example 4)on page  
E10.  
No  
Do you connect it to a Digital  
Amplifier?  
x Yes x  
See Connecting to a Digital Amplifier  
(Example 5)on page E10.  
No  
x Yes x  
Do you connect it to an Amplifier  
with Dolby Pro Logic Decoder?  
See Connecting to an Amplifier with  
Dolby Pro Logic Decoder (Example 6)”  
on page E11.  
No  
See Connecting to an Audio  
System and TV (Example 3)on  
page E9.  
Download from Www.Somanuals.c-oEm5. -All Manuals Search And Download.  
BASIC CONNECTIONS  
Connecting to a Conventional TV (Example 1)  
Connect the DVD video player to your TV.  
DVD video player  
COMPONENT VIDEO OUT  
Y
P
B
P
R
VIDEO OUT  
SELECT  
S
R
L
OPT.  
S-VIDEO OUT  
DIGITAL  
OUT  
COMPONENT  
AUDIO OUT  
VIDEO OUT  
To AC 120V, 60Hz  
TV with Audio/Video input jacks  
To VIDEO OUT jack  
(Yellow)  
AUDIO  
VIDEO  
INPUT  
1
R-AUDIO-L VIDEO  
To AUDIO OUT jacks  
Audio/Video cable (supplied)  
To audio input jacks  
To video input jack  
(Yellow)  
Notes:  
Please refer to your TV instruction manual.  
When you connect the DVD video player to your TV, be sure  
to turn off the power and disconnect both units from the wall  
outlet until all the connections have been made.  
If your TV has one audio input jack, connect the AUDIO OUT  
jacks of the DVD video player to a Y-cable adapter (not  
supplied), then connect it to the TV Audio input. Please  
consult your local audio/video dealer.  
Do not connect the DVD video player to a VCR directly. The  
playback picture will be distorted because DVD video discs  
are copy protected.  
Using the COMPONENT VIDEO OUT jacks  
Note:  
Please follow the steps before turn on the power.  
1. If your TV has the component video input jacks, connect  
the DVD video player to these jacks. (The VIDEO OUT or  
S-VIDEO OUT jack connection is not necessary.)  
You can enjoy high quality picture playback.  
2. Set the VIDEO OUT SELECT switch to the COMPONENT  
position.  
Using the S-VIDEO jack  
Note:  
Please follow the steps before turn on the power.  
1. If your TV has the S-video input jack, connect the DVD video  
player with the S-video cable (not supplied). (The VIDEO  
OUT jack connection is not necessary.)  
3. You also need to connect the left  
and right audio cables (not supplied)  
You can enjoy clearer picture playback.  
to the AUDIO OUT jacks of DVD  
video player and the Audio input  
jacks of the TV.  
2. Set the VIDEO OUT SELECT switch to the S position.  
3. You also need to connect the left and right audio cables (not  
supplied) to the AUDIO OUT jacks of DVD video player and  
the Audio input jacks of the TV.  
TV  
4. Set the DVD video player to the  
INTERLACE position. See page  
E13.  
DVD video player  
TV  
COMPONENT VIDEO OUT  
Y
P
B
P
R
VIDEO OUT  
SELECT  
S
Y
R
VIDEO OUT  
SELECT  
R
L
S-VIDEO OUT  
COMPONENT VIDEO INPUT  
COMPONENT  
S
AUDIO OUT  
VIDEO OUT  
S-VIDEO IN 1  
Y
PB  
PR  
S-VIDEO OUT  
COMPONENT  
To S-VIDEO  
OUT jack  
To S-video input jack  
*S-video cable  
(not supplied)  
*Please consult your local audio/video dealer.  
*Component video cable (not supplied)  
Download from Www.Somanuals.c-oEm6. -All Manuals Search And Download.  
Using RF Modulator  
If your TV does not have a Video input jack and has an antenna  
terminal only, please purchase the *RF Modulator (not supplied).  
(*Please consult your audio/video dealer.)  
Example: DVD video player, TV and RF Modulator connections  
Audio/Video cable (supplied)  
To audio input  
jacks  
3
To AUDIO  
OUT jacks  
To AC 120V,  
1
60Hz  
TV  
A/V INPUT JACKS  
TO TV  
ANT. IN  
CHANNEL  
COMPONENT VIDEO OUT  
Y
R
P
B
P
R
VIDEO  
R-AUDIO-L  
3
4
VIDEO OUT  
SELECT  
RF Modulator  
S
L
S-VIDEO OUT  
4
COMPONENT  
VHF/UHF  
ANTENNA  
IN  
AUDIO OUT  
VIDEO OUT  
DVD video player  
2
1. Connect the antenna cable (not supplied) to the ANT. IN  
terminal of the RF Modulator.  
2. Connect the 75-ohm coaxial cable (not supplied) between  
the TO TV terminal of the RF Modulator and the VHF/UHF  
ANTENNA IN terminal of the TV.  
3. Connect the Audio/Video cable (supplied) between the  
AUDIO OUT and VIDEO OUT jacks of the DVD video  
player and the AUDIO INPUT and VIDEO INPUT jacks of  
the RF Modulator.  
4. Turn on the TV, and set the channel number (CHANNEL3 or  
CHANNEL4) on both TV and RF Modulator, whichever is not  
used for regular broadcasts in your area.  
Note:  
For more details, please refer to the instruction manual of the RF  
Modulator.  
Example: DVD video player, VCR, TV and RF Modulator connections  
Audio/Video cable (supplied)  
To audio input  
jacks  
4
To AUDIO  
OUT jacks  
1
2
To AC 120V,  
60Hz  
VHF/UHF  
FROM ANT.  
A/V INPUT JACKS  
TO TV  
ANT. IN  
IN  
CHANNEL  
COMPONENT VIDEO OUT  
Y
R
P
B
P
R
VIDEO  
R-AUDIO-L  
3
4
VIDEO OUT  
SELECT  
S
TO TV  
RF Modulator  
3
4
OUT  
L
S-VIDEO OUT  
COMPONENT  
5
AUDIO OUT  
VIDEO OUT  
CHANNEL  
5
DVD video player  
VHF/UHF  
ANTENNA  
IN  
TV  
3
VCR  
1. Connect the antenna cable (not supplied) to the VHF/UHF  
FROM ANT IN terminal of the VCR.  
2. Connect the 75-ohm coaxial cable (not supplied) between  
the TO TV OUT terminal of the VCR and the ANT. IN  
terminal of the RF Modulator.  
3. Connect the 75-ohm coaxial cable (not supplied) between  
the TO TV terminal of the RF Modulator and the VHF/UHF  
ANTENNA IN terminal of the TV.  
4. Connect the Audio/Video cable (supplied) between the  
AUDIO OUT and VIDEO OUT jacks of the DVD video player  
and the AUDIO INPUT and VIDEO INPUT jacks of the RF  
Modulator.  
5. Turn on the TV, and set the channel number (CHANNEL3 or  
CHANNEL4) on all TV, VCR and RF Modulator, whichever  
is not used for regular broadcasts in your area.  
Note:  
For more details, please refer to the instruction manual of the RF  
Modulator.  
Download from Www.Somanuals.c-oEm7. -All Manuals Search And Download.  
Connecting to a TV with Progressive-scan Capability (Example 2)  
Your TV must be capable of handling progressive scanning and have component video input capability.  
To COMPONENT VIDEO  
OUT jacks  
*Component video cable (not supplied)  
DVD video player  
COMPONENT VIDEO OUT  
Y
R
P
B
P
R
VIDEO OUT  
SELECT  
S
L
OPT.  
S-VIDEO OUT  
DIGITAL  
OUT  
COMPONENT  
AUDIO OUT  
VIDEO OUT  
To COMPONENT VIDEO  
INPUT jacks  
To AUDIO OUT jacks  
To AC 120V, 60Hz  
R
L
Y
P
B
PR  
AUDIO INPUT  
COMPONENT VIDEO INPUT  
*Audio cable (not supplied)  
To audio  
input jacks  
TV with progressive-scan capability  
*Please consult your local audio/video dealer.  
1. Connect the DVD video player to the component video input  
jacks of the TV. (The VIDEO OUT or S-VIDEO OUT jack  
connection is not necessary.)  
2. Set the VIDEO OUT SELECT switch to the COMPONENT  
position.  
3. You also need to connect the left and right audio cables (not  
supplied) to the AUDIO OUT jacks of DVD video player and  
the Audio input jacks of the TV.  
Notes:  
Please refer to your TV instruction manual.  
When you connect the DVD video player to your TV, be sure  
to turn off the power and disconnect both units from the wall  
outlet until all the connections have been made.  
Do not connect the DVD video player to a VCR directly. The  
playback picture will be distorted because DVD video discs  
are copy protected.  
4. Set the DVD video player to the PROGRESSIVE position.  
See page E13.  
Progressive Scanning  
While interlaced scanning produces one frame of video in two  
fields, progressive scanning creates one frame in one field.  
Conventional interlaced scanning constitutes one second with  
30 frames (60 fields), but progressive scanning constitutes it with  
60 frames from scratch. Progressive scanning can reproduce  
sharper picture with high resolution for still image or other picture  
containing long texts or horizontal lines.  
This model has compliance with 525p (progressive) system.  
Interlaced scanning  
+
Progressive scanning  
Download from Www.Somanuals.c-oEm8. -All Manuals Search And Download.  
ADDITIONAL CONNECTION EXAMPLES  
Connecting to an Audio System and TV (Example 3)  
Connect the DVD video player to an Audio System and a TV.  
DVD video player  
COMPONENT VIDEO OUT  
Y
PB  
PR  
VIDEO OUT  
SELECT  
S
R
L
OPT.  
S-VIDEO OUT  
DIGITAL  
OUT  
COMPONENT  
AUDIO OUT  
VIDEO OUT  
To AC 120V, 60Hz  
To VIDEO OUT jack  
(Yellow)  
TV with Audio/Video input jacks  
To video input (Yellow)  
To AUDIO OUT jacks  
*Video cable  
(not supplied)  
AUDIO  
VIDEO  
INPUT  
1
R-AUDIO-L VIDEO  
Notes:  
Please refer to the instruction manual of  
your Audio System and TV.  
Audio System  
*Audio cable  
(not supplied)  
To audio input jacks  
When you connect the DVD video player  
to other equipment, be sure to turn off the  
power and disconnect all of the equipment  
from the wall outlet until all the  
connections have been made.  
Do not connect the DVD video player to a  
VCR directly. The playback picture will  
be distorted because DVD video discs  
are copy protected.  
(White) L  
L
AUDIO  
INPUT  
R
(Red) R  
*Please consult your local audio/video dealer.  
Using the COMPONENT VIDEO OUT jacks  
Note:  
Please follow the steps before turn on the power.  
1. If your TV has the component video input jacks, connect the  
DVD video player to these jacks. (The VIDEO OUT or S-  
VIDEO OUT jack connection is not necessary.)  
You can enjoy high quality picture playback.  
2. Set the VIDEO OUT SELECT switch to the COMPONENT  
position.  
3. You also need to connect the left and right audio cables (not  
supplied) to the AUDIO OUT jacks of DVD video player and  
the Audio input jacks of the Audio System.  
Using the S-VIDEO jack  
Note:  
Please follow the steps before turn on the power.  
1. If your TV has the S-video input jack, connect the DVD video  
player with the S-video cable (not supplied). (The VIDEO  
OUT jack connection is not necessary.)  
You can enjoy clearer picture playback.  
2. Set the VIDEO OUT SELECT switch to the S position.  
3. You also need to connect the left and right audio cables (not  
supplied) to the AUDIO OUT jacks of DVD video player and  
the Audio input jacks of the Audio System.  
TV  
4. Set the DVD video player to  
the INTERLACE position.  
See page E13.  
COMPONENT VIDEO OUT  
DVD video player  
TV  
Y
R
P
B
P
R
VIDEO OUT  
SELECT  
S
Y
L
S-VIDEO OUT  
COMPONENT VIDEO INPUT  
VIDEO OUT  
SELECT  
COMPONENT  
AUDIO OUT  
VIDEO OUT  
Y
PB  
PR  
S
S-VIDEO IN 1  
R
S-VIDEO OUT  
COMPONENT  
To S-VIDEO  
OUT jack  
To S-video input jack  
*S-video cable  
(not supplied)  
*Please consult your local audio/video dealer.  
*Component video cable (not supplied)  
Download from Www.Somanuals.c-oEm9. -All Manuals Search And Download.  
Notes:  
For VIDEO connection, please refer to BASIC CONNECTIONS.  
Please refer to the instruction manual of your amplifier.  
When you connect the DVD video player to your amplifier, be sure to turn off the power and disconnect both units from the wall  
outlet until all the connections have been made.  
Connecting to an Amplifier with Dolby Digital Decoder, DTS Decoder or MPEG2 Decoder  
(Example 4)  
Amplifier with Dolby Digital Decoder, DTS Decoder or MPEG2 Decoder  
To digital audio input  
*Optical cable  
(not supplied)  
Center  
speaker  
To DIGITAL OUT jack  
Front right  
speaker  
Front left  
speaker  
COMPONENT VIDEO OUT  
Y
PB  
PR  
Subwoofer  
VIDEO OUT  
SELECT  
S
R
L
OPT.  
S-VIDEO OUT  
Surround left  
speaker  
Surround right  
speaker  
DIGITAL  
OUT  
COMPONENT  
AUDIO OUT  
VIDEO OUT  
Before connecting, remove the  
protective cap from the jack. Replace  
the cover when the jack is not in use.  
*Please consult your local audio/video dealer.  
To enjoy Dolby Digital sound  
Select Dolby Digital BitStreamin Setting Digital Outon the  
INITIAL SETTINGS. (See page E29.)  
Manufactured under license from Dolby Laboratories.  
Dolby, Pro Logicand the double-D symbol are trademarks of  
Dolby Laboratories.  
To enjoy DTS sound  
DTSand DTS Digital Outare trademarks of Digital Theater  
Select DTS Onin Setting Digital Outon the INITIAL SETTINGS.  
(See page E29.)  
Systems, Inc.  
To enjoy MPEG2 sound  
Select MPEG BitStreamin Setting Digital Outon the INITIAL  
SETTINGS. (See page E29.)  
Connecting to a Digital Amplifier (Example 5)  
You can enjoy 2 Channel Digital Stereo Sound.  
Amplifier with an optical digital input  
To digital audio input  
*Optical cable  
(not supplied)  
Before  
connecting,  
remove the protective cap  
from the jack. Replace the  
cover when the jack is not  
in use.  
To DIGITAL OUT jack  
Front left  
speaker  
Front right  
speaker  
COMPONENT VIDEO OUT  
Y
R
PB  
PR  
VIDEO OUT  
SELECT  
S
L
OPT.  
S-VIDEO OUT  
DIGITAL  
OUT  
COMPONENT  
AUDIO OUT  
VIDEO OUT  
To enjoy 2 Channel Digital Stereo sound  
Select Dolby Digital LPCM, MPEG LPCM, and DTS Offin  
Setting Digital Outon the INITIAL SETTINGS. (See page E29.)  
Note:  
*Please consult your local audio/video dealer.  
If DTS Onis selected, loud noise will occur. (See page E29.)  
Download from Www.Somanuals.-cEom1.0A-ll Manuals Search And Download.  
Connecting to an Amplifier with Dolby Pro Logic Decoder (Example 6)  
Amplifier with Dolby Pro Logic Decoder  
To AUDIO INPUT jacks  
*Audio cable  
(not supplied)  
Center  
speaker  
To AUDIO OUT jacks  
Front left  
speaker  
Front right  
speaker  
COMPONENT VIDEO OUT  
Y
R
PB  
PR  
Subwoofer  
VIDEO OUT  
SELECT  
S
L
OPT.  
S-VIDEO OUT  
Surround left  
speaker  
Surround right  
speaker  
DIGITAL  
OUT  
COMPONENT  
AUDIO OUT  
VIDEO OUT  
Note:  
Please refer to your amplifier instruction manual.  
*Please consult your local audio/video dealer.  
Power Supply  
CAUTION:  
Connect the power cord to a 120VAC 60Hz outlet. This unit is  
equipped with a polarized plug. If you have difficulty inserting the  
plug, turn it over and reinsert it. If the unit will not be used for a  
long time, disconnect the AC plug from the AC outlet.  
TO PREVENT ELECTRIC SHOCK, MATCH WIDE  
BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.  
Notes:  
Before plugging the power cord into an AC outlet, make sure  
that all the connections have been made.  
The unit is not disconnected from the AC power unless the  
power cord is unplugged from the AC outlet.  
FOR SAFE AND EFFICIENT OPERATION  
Do not damage the power cord.  
When carrying the unit, be sure to remove a disc which  
When not in use, disconnect the power cord from the outlet.  
Grasp the plug, not the cord, when disconnecting the unit.  
If water should enter the unit, electrical shock or a malfunction  
may result. Use in an area where there is low humidity and  
little dust.  
Do not disassemble or alter the unit in any way.  
Do not use the unit in areas where extremes in temperature  
occur (below 40°F (5°C) or exceeding 95°F (35°C)), or where  
it may be exposed to direct sunlight.  
Because of the DVD video player extremely low noise and  
wide dynamic range, there is a tendency to set the volume on  
the amplifier higher than necessary. Doing so may produce  
an excessively high output from the amplifier which can  
cause damage to your speakers. Please be careful in this  
regard.  
Sudden changes in the surrounding temperature can cause  
dew to form on the optical pickup lens inside the unit. Under  
this condition the unit may be unable to operate properly. If  
this should occur, remove the disc and allow the unit to adjust  
to the surrounding temperature.  
may be inside and turn the power off. Then unplug the  
power cord from the AC outlet after 10 seconds. Carrying  
the unit with a disc inside may damage the disc and/or  
the unit.  
The unit is automatically set to the Screen Saver mode after  
approximately 15 minutes have elapsed under the stop or  
pause mode.  
The unit is automatically set to the standby mode after  
approximately 30 minutes have elapsed under the complete  
stop mode.  
Press [q] (or [OPEN/CLOSE] on the remote control) when  
closing the disc tray. Do not push the disc tray.  
Download from Www.Somanuals.-cEom1.1A-ll Manuals Search And Download.  
PLAYABLE DISCS  
The following types of discs can be played on this unit.  
CAUTION:  
Only the above types of discs can be played on this unit.  
DVD-ROM, CD-ROM, SVCD, CVD, VCD, etc. cannot be  
played.  
Disc type and logo mark  
This unit can play back the DVD-R that has recorded movie  
data as well. However, some DVD-Rs cannot be played back  
depending on the recording conditions.  
The DVD-R that has no movie data cannot be played back.  
This unit is to be used exclusively with the NTSC color  
system. PAL and SECAM system discs cannot be used with  
this unit.  
DVD-Video  
Audio CD  
TM  
For MP3/WMA CD, please see page E23.  
For Picture/JPEG CD, please see pages E25 and E26.  
Region Number  
Region number (Regional restriction code) is built-in to the unit  
and DVD video discs.  
Handling, Storing and Cleaning Discs  
Region number 1or ALLof DVD video discs can be used on  
this unit.  
Fingerprints and dust should be carefully wiped from the  
signal surface of the disc (glossy side) with a soft cloth.  
Wipe in a straight motion from the center to the outside of  
the disc.  
Never use chemicals such as record cleaning sprays,  
antistatic sprays or fluids, benzene or thinner to clean the  
discs. These chemicals will permanently damage the plastic  
surface of the disc.  
ALL  
1
DVD Video Disc  
DVD video discs are divided into titles, and the titles are sub-  
divided into chapters.  
Title 1  
Title 2  
To remove a disc from its storage case, press down on the  
center of the case and lift the disc out, holding it carefully by  
the edges.  
Chapter 1 Chapter 2 Chapter 1 Chapter 2 Chapter 3  
Discs should be returned to their cases after use to protect  
them from dust and scratches.  
To prevent warping the disc, do not expose it to direct  
sunlight, high humidity or high temperatures for extended  
periods of time.  
There are the marks on some DVD video disc package.  
Examples:  
Multiple languages  
3
Do not apply paper or write anything on either side of the  
disc. Sharp writing instruments, or the inks used in some  
felt-tip pens, may damage the surfaces of the disc.  
2
Multi-language subtitles  
Multi-angle  
3
Multi-aspect  
16:9 LB  
1
This product incorporates copyright protection technology that  
is protected by method claims of certain U.S. patents and other  
intellectual property rights owned by Macrovision Corporation  
and other rights owners. Use of this copyright protection  
technology must be authorized by Macrovision Corporation,  
and is intended for home and other limited viewing uses only  
unless otherwise authorized by Macrovision Corporation.  
Reverse engineering or disassembly is prohibited.  
Region Number  
Closed caption  
Audio CD Disc  
Audio CD discs are divided into tracks.  
Track 1 Track 2 Track 3  
Track 4  
Track 5  
Download from Www.Somanuals.-cEom1.2A-ll Manuals Search And Download.  
BASIC OPERATION  
Preparations  
Basic Playback  
Notes:  
Turn on the power (TV, Audio System, AV amplifier, etc.).  
Select the video input source from your television.  
(Please refer to your TV instruction manual.)  
Do not touch the disc tray while it is moving.  
Never place anything except a disc on the disc tray. Foreign  
objects can damage the unit.  
Do not apply excessive force to the disc tray.  
Discs must be placed on the disc tray one at a time.  
TV  
When operation buttons are pressed, that operation is displayed  
on the TV screen. The display turns off after several seconds.  
VIDEO  
3
2, 4  
5 1  
f
e
n
a
Select the playback picture size according to the aspect ratio  
of the TV. (For more details, see Setting Displayon page  
E28.)  
q
z/ON  
4:3 LB  
4:3 PS  
16:9 :  
(Letterbox):  
(Panscan):  
PICTURE  
MODE  
z/ON LAST MEMO  
OPEN/CLOSE  
1
2, 4  
PROGRAM  
SURROUND  
ON SCREEN  
REPEAT A-B REPEAT  
ANGLE  
/RANDOM  
ZOOM  
ANGLE  
REPLAY  
SUBTITLE  
CHANGE  
SETUP  
MENU  
4
SUBTITLE  
ON/OFF  
Select the audio input source (Audio System, AV amplifier,  
etc.).  
ENT  
b
a
AUDIO  
TOP MENU  
RETURN  
5
REV SLOW  
FWD SLOW  
When the DVD video player is connected to the  
COMPONENT VIDEO OUT jacks of the TV (see pages E6,  
E8, and E9), you must select the INTERLACE or  
PROGRESSIVE position.  
PAUSE/STEP  
PLAY  
PREV  
NEXT  
Note: Initial setting is INTERLACE.  
1. Turn on the power (TV and DVD video player).  
2. In No Discmode, press and hold down [ a] on the DVD  
REV  
FWD  
CLEAR  
5
1
2
3
C
video player until “  
(PROGRESSIVE) appears on the TV screen.  
(INTERLACE) or “  
1. Press [z/ON].  
SANYOlogo appears on the TV screen.  
------blinks, and then NO dISCappears on the FL  
Conventional TV: Select “  
.  
display.  
TV with Progressive-scan Capability: Select “  
.  
Note:  
2. Press [q] (or [OPEN/CLOSE] on the remote control).  
In “  
mode, the closed caption may not appear on  
OPENappears on the FL display and the disc tray  
the TV screen.  
opens.  
Note:  
To open or close the disc tray, be sure to press [q] (or  
[OPEN/CLOSE] on the remote control). Do not press the disc  
tray with your hand.  
3. Place the disc with the label facing up on the disc tray.  
Important Note:  
This instruction manual explains the basic instruction of this  
unit using the remote control.  
Some DVD video discs have different functions that may  
not be explained in this instruction manual. You may need  
extra instructions. In this case, please follow the instructions  
displayed on the TV screen or jacket or case of the disc.  
or  
For 5-inch (12cm) disc  
For 3-inch (8cm) disc  
may appear on the TV screen during operation. This  
icon means that the function is not available on the disc  
now.  
For improvement, FL displays and on-screen displays  
subject to change without notice.  
Download from Www.Somanuals.-cEom1.3A-ll Manuals Search And Download.  
4. Press [q] (or [OPEN/CLOSE] on the remote control) again.  
Stopping Playback  
The disc tray closes.  
Readingappears on the TV screen.  
[DVD]  
Press [n] once during playback. Resume nappears briefly  
on the TV screen.  
Note:  
Some discs may start playback automatically.  
When you press [a PLAY] (or [a] on the unit), playback  
starts automatically from the point where you stopped. a”  
appears briefly on the TV screen.  
5. Press [aPLAY] (or [a] on the unit) to start playback.  
aappears.  
Note:  
Some discs may not resume playback.  
Press [n] twice during playback. nappears briefly on the  
TV screen and playback stops completely.  
When you press [aPLAY] (or [a]), playback starts from the  
beginning of the disc.  
Example:  
DVD  
[CD]  
Elapsed playing time  
Press [n] once during playback. The unit stops completely.  
Notes:  
To turn off the power, press [z/ON]. OFFappears briefly on the  
FL display.  
In some discs, even if 4:3 PS is selected, the black bands  
may remain on the screen.  
If the disc is loaded with the label side downward (and it is a  
single sided disc), or if a badly scratched disc is loaded, No  
Playappears on the TV screen. If this occurs, load the disc  
correctly or replace the disc.  
OPEN/CLOSE  
PICTURE  
z/ON LAST MEMO  
OPEN/CLOSE  
MODE  
z/ON  
PROGRAM  
LAST  
MEMO  
SURROUND  
ON SCREEN  
REPEAT A-B REPEAT  
ANGLE  
/RANDOM  
ZOOM  
ANGLE  
REPLAY  
If a DVD disc menu screen appears on the TV screen...  
SUBTITLE  
CHANGE  
4
SETUP  
MENU  
4
TV  
SUBTITLE  
ON/OFF  
ENT  
ENT  
b
a
AUDIO  
TOP MENU  
RETURN  
5
MENU  
5
REV SLOW  
FWD SLOW  
PAUSE/STEP  
PLAY  
Languages &PAlaudyioMSoevt-Uiep  
Subtitles  
Theatrical Trailers  
Scene Selections  
PREV  
NEXT  
n(Stop)  
REV  
FWD  
CLEAR  
PLAY  
ContinuingPlaybackfromWhereYouStopped  
Watching (LAST MEMO PLAY), for DVD only  
1. Press [o], [a], [p] or [b] (or the number  
buttons) to select the desired menu.  
2. Press [ENT].  
4
ENT  
b
a
Playback of the selected menu starts.  
1. Press [LAST MEMO] to stop playback.  
Last Memo nappears briefly on the TV screen.  
LMand StOPappear on the FL display.  
5
Note:  
For more details, please refer to the jacket or case of the disc.  
2. Press [OPEN/CLOSE] (or [q] on the unit) to open the disc  
tray to change the disc, or press [z/ON] to turn off the power.  
To lock the disc tray  
3. Load the disc (or press [aPLAY]), or press [z/ON] again.  
You can lock the disc tray to prevent misuse of young children.  
While the disc tray is opened, press [q] on the unit until LOC”  
appears on the FL display (or Disc Tray Lockedappears on  
the TV screen). (The disc tray closes.)  
Last Memo Play?screen appears on the TV screen.  
4. Press [4] to select Yes.  
The OPEN/CLOSE (or [q]) button will not function.  
Last Memo Play?  
To release this mode, press [q] on the unit until Un-LOC”  
appears on the FL display (or Disc Tray Unlockedappears on  
the TV screen).  
Yes  
No  
Clear  
(The memory is released.)  
5. Press [ENT].  
Playback resumes from the point where you stopped.  
If desired, press [LAST MEMO] again.  
Notes:  
Point on up to 3 discs can be memorized.  
The Last Memo Play mode may not work correctly with some  
discs.  
Download from Www.Somanuals.-cEom1.4A-ll Manuals Search And Download.  
Selecting a DVD Menu  
Notes:  
PICTURE  
MODE  
The operation may differ depending on the disc used.  
Selecting a menu may not be possible on some discs.  
z/ON LAST MEMO  
OPEN/CLOSE  
PROGRAM  
SURROUND  
ON SCREEN  
REPEAT A-B REPEAT  
ANGLE  
/RANDOM  
ZOOM  
ANGLE  
REPLAY  
1. Press [MENU].  
SUBTITLE  
CHANGE  
SETUP  
MENU  
The main menu screen will appear.  
4
1
SUBTITLE  
ON/OFF  
ENT  
b
a
Note:  
AUDIO  
TOP MENU  
RETURN  
3
2
5
Press [MENU] again to resume playback.  
REV SLOW  
FWD SLOW  
2. Press [4], [5], [b] or [a] (or the number buttons) to select the  
desired menu.  
3. Press [ENT]  
The selected menu playback starts.  
Selecting a Top Menu [DVD]  
Notes:  
PICTURE  
MODE  
z/ON LAST MEMO  
OPEN/CLOSE  
The operation may differ depending on the disc used.  
Selecting a top menu may not be possible on some discs.  
PROGRAM  
SURROUND  
ON SCREEN  
REPEAT A-B REPEAT  
ANGLE  
/RANDOM  
ZOOM  
ANGLE  
REPLAY  
SUBTITLE  
CHANGE  
SETUP  
MENU  
1. Press [TOP MENU].  
4
SUBTITLE  
ON/OFF  
The top menu will appear (if the disc contains a top menu).  
ENT  
b
a
AUDIO  
TOP MENU  
RETURN  
3
5
1
2. Press [4], [5], [b] or [a] (or the number buttons) to select the  
2
REV SLOW  
FWD SLOW  
desired menu.  
3. Press [ENT].  
The selected menu playback starts.  
Chapter (Track) Skip  
f
e
n
a
q
z/ON  
Skipping forward  
Press [NEXT e] (or e) during playback to skip to the next  
chapter (or track).  
f e  
eappears briefly on the TV screen.  
A chapter (or track) is skipped each time the button is pressed.  
AUDIO  
TOP MENU  
RETURN  
5
Skipping backward  
REV SLOW  
FWD SLOW  
Press [PREV f] (or f) during playback to skip back to the  
beginning of the chapter (or track) currently play.  
fappears briefly on the TV screen.  
Press the button again immediately to skip back to the beginning  
of the previous chapter (or track).  
PAUSE/STEP  
PLAY  
PREV  
NEXT  
PREV  
NEXT  
REV  
FWD  
CLEAR  
1
2
3
C
Note:  
You can skip only through the chapters, not over the title on the  
DVD disc.  
Important Note:  
may appear on the TV screen during operation. This icon  
means that the function is not available on the disc now.  
Download from Www.Somanuals.-cEom1.5A-ll Manuals Search And Download.  
Title Search [DVD]  
1. Press [SEARCH MODE] once during playback or in the stop  
Important Note:  
may appear on the TV screen during operation. This icon  
mode.  
means that the function is not available on the disc now.  
The title search screen appears on the TV screen.  
Example:  
REV SLOW  
FWD SLOW  
PAUSE/STEP  
PLAY  
Title Search  
-- /28  
PREV  
NEXT  
2. Press the number button(s) to enter the title number.  
Example:  
3
2
REV  
FWD  
CLEAR  
To select Title No.3, press [3].  
To select Title No.10, press [1], then [0].  
To select Title No.24, press [2], then [4].  
Note:  
1
4
7
2
3
6
9
C
CLEAR  
1
0
5
8
SEARCH  
MODE  
If you make a mistake, press [CLEAR].  
3. Press [aPLAY].  
Playback starts from the selected title.  
Time Search [CD]  
Chapter Search [DVD]  
1. Press [SEARCH MODE] twice during playback.  
The chapter search screen appears on the TV screen.  
Example:  
1. Press [SEARCH MODE] once during playback.  
The time search screen appears on the TV screen.  
Time Search  
--:--:--  
Title  
01 Chapter Search  
-- /35  
2. Press the number button(s) to enter the time.  
Example:  
2. Press the number button(s) to enter the chapter number.  
Example:  
2 minutes 5 seconds  
42 minutes 39 seconds  
Note:  
Press [2], [0] and [5].  
Press [4], [2], [3] and [9].  
To select Chapter No.3, press [3].  
To select Chapter No.10, press [1], then [0].  
To select Chapter No.24, press [2], then [4].  
Note:  
If you make a mistake, press [CLEAR].  
3. Press [aPLAY].  
If you make a mistake, press [CLEAR].  
Playback starts from the searched time in the track.  
3. Press [aPLAY].  
Playback starts from the selected chapter .  
Time Search [DVD]  
Track Search [CD]  
1. Press [SEARCH MODE] three times during playback.  
The time search screen appears on the TV screen.  
REV SLOW  
FWD SLOW  
PAUSE/STEP  
PLAY  
PREV  
NEXT  
2
1
Time Search  
--:--:--  
REV  
FWD  
CLEAR  
1
4
7
2
3
6
9
C
2. Press the number button(s) to enter the time.  
Example:  
0
5
8
SEARCH  
MODE  
20 minutes 5 seconds  
42 minutes 39 seconds  
Press [2], [0], [0] and [5].  
Press [4], [2], [3] and [9].  
1 hour 4 minutes 35 seconds Press [1], [0], [4], [3] and [5].  
Note:  
1. Press the number buttons during playback or in the stop  
mode.  
If you make a mistake, press [CLEAR].  
Example:  
To select Track No. 3, press [3].  
To select Track No. 10, press [1], then [0].  
To select Track No. 24, press [2], then [4].  
Note:  
3. Press [aPLAY].  
Playback starts from the searched time.  
If you make a mistake, press [CLEAR].  
Note:  
2. Press [aPLAY].  
The Search mode may not work on some discs.  
Playback starts from the selected track.  
Download from Www.Somanuals.-cEom1.6A-ll Manuals Search And Download.  
Fast Playback  
Fast forward playback  
SETUP  
MENU  
CHANGE  
Press [FWD c] repeatedly to select the fast speed forward  
playback (up to 200 times normal speed in DVD).  
4
SUBTITLE  
ON/OFF  
ENT  
b
a
AUDIO  
TOP MENU  
RETURN  
[DVD]  
5
c1 vc2 vc3 vc4 (4 steps)  
REV SLOW  
FWD SLOW  
[CD]  
PAUSE/STEP  
PLAY  
c1 vc2 (2 steps)  
PREV  
NEXT  
Press [aPLAY] to return to normal playback.  
REV  
FWD  
PLAY  
REV  
FWD  
CLEAR  
Fast reverse playback  
Press [REV d] repeatedly to select the fast speed reverse  
playback (up to 200 times normal speed in DVD).  
[DVD]  
1
4
7
2
3
6
9
C
0
5
8
SEARCH  
MODE  
d1 vd2 vd3 vd4 (4 steps)  
[CD]  
d1 vd2 (2 steps)  
Press [aPLAY] to return to normal playback.  
Important Note:  
may appear on the TV screen during operation. This icon  
Note:  
means that the function is not available on the disc now.  
The sound is muted during fast playback in DVD.  
SETUP  
MENU  
CHANGE  
Slow Motion Playback [DVD]  
4
SUBTITLE  
ON/OFF  
Forward slow playback  
ENT  
b
a
AUDIO  
TOP MENU  
RETURN  
Press [FWD SLOW  
] repeatedly to select the forward slow  
5
speed playback.  
REV SLOW  
FWD SLOW  
1 v  
2 v 3 v 4 (4 steps)  
PAUSE/STEP  
PLAY  
REV  
SLOW  
FWD  
SLOW  
PREV  
NEXT  
Press [aPLAY] to return to normal playback.  
REV  
FWD  
CLEAR  
Reverse slow playback  
PLAY  
1
4
7
2
3
6
9
C
Press [REV SLOW  
speed playback.  
] repeatedly to select the reverse slow  
0
5
8
SEARCH  
MODE  
1 v  
2 v 3 v 4 (4 steps)  
Press [aPLAY] to return to normal playback.  
Note:  
The sound is muted during slow motion playback.  
Still Picture (Pause)  
5
Press [kPAUSE/STEP] during playback.  
PAUSE  
/STEP  
REV SLOW  
FWD SLOW  
kappears on the FL display.  
kappears briefly on the TV screen.  
PAUSE/STEP  
PLAY  
PREV  
NEXT  
[DVD]  
Still picture mode  
[CD]  
Pause mode  
REV  
FWD  
CLEAR  
PLAY  
1
2
3
C
Press [aPLAY] to return to normal playback.  
Frame by Frame Advance Playback  
[DVD]  
Note:  
The sound is muted during still picture.  
Press [kPAUSE/STEP] during still picture.  
kaappears briefly on the TV screen.  
Each time the button is pressed, the picture advances one frame.  
Press [aPLAY] to return to normal playback.  
Notes:  
The sound is muted.  
Frame playback is operated forward only.  
Download from Www.Somanuals.-cEom1.7A-ll Manuals Search And Download.  
Picture Zoom (Pin Point Zoom) [DVD]  
1. Press [ZOOM] during normal/slow playback or still picture.  
The pin point guide appears on the TV screen.  
PROGRAM  
/RANDOM  
SURROUND  
ON SCREEN  
REPEAT A-B REPEAT  
ANGLE  
ZOOM  
ANGLE  
REPLAY  
SUBTITLE  
CHANGE  
ZOOM  
ENT  
SETUP  
MENU  
4
SUBTITLE  
ON/OFF  
ENT  
b
a
4, a, 5, b  
AUDIO  
TOP MENU  
RETURN  
5
REV SLOW  
FWD SLOW  
1
4
7
2
5
8
3
6
9
PAUSE/STEP  
PLAY  
PREV  
NEXT  
REV  
FWD  
CLEAR  
The guide divides the screen into nine, and the number  
shows the point.  
1
4
7
2
3
6
9
C
Number  
button  
0
5
8
SEARCH  
MODE  
Note:  
If you quit the screen, press [ZOOM].  
2. To select the point, do one of the following:  
3. Press [ZOOM] again.  
Press [o], [a], [p] or [b], and press [ENT].  
Press the number button.  
The screen is magnified more than 1.  
2appears briefly on the TV screen.  
If necessary, press [o], [a], [p] or [b] repeatedly to move  
the screen as desired.  
The screen is magnified.  
1appears briefly on the TV screen.  
4. Press [ZOOM] to return to the original screen.  
If necessary, press [o], [a], [p] or [b] repeatedly to move  
the screen as desired.  
Offappears briefly on the TV screen.  
Note:  
Pin Point Zoom may not work on some discs.  
Viewing from a Desired Camera Angle  
(Multi-Angle) [DVD]  
PICTURE  
MODE  
z/ON LAST MEMO  
OPEN/CLOSE  
Some DVD video discs may contain scenes which have been  
shot simultaneously from a number of different camera angles.  
The jacket or case of discs that are recorded with angles will be  
marked.  
Example:  
3
PROGRAM  
SURROUND  
/RANDOM  
REPEAT A-B REPEAT  
ANGLE  
ANGLE  
REPLAY  
ON SCREEN  
ZOOM  
ANGLE  
REPLAY  
SUBTITLE  
CHANGE  
SETUP  
MENU  
ANGLE  
4
SUBTITLE  
ON/OFF  
ENT  
b
a
AUDIO  
TOP MENU  
RETURN  
5
REV SLOW  
FWD SLOW  
Note:  
The recorded angles differ depending on the disc used.  
1. Play the disc that is recorded with angles.  
2. Press [ANGLE] repeatedly until the desired angle appears.  
Example:  
Important Note:  
3/5  
may appear on the TV screen during operation. This icon  
means that the function is not available on the disc now.  
Angle Replay  
During Multi-angle playback screen, press [ANGLE REPLAY].  
The unit skips back to last approximately 10 seconds, changes it  
to the next camera angle and plays it, and continues playback.  
If desired, press the button again.  
Download from Www.Somanuals.-cEom1.8A-ll Manuals Search And Download.  
Repeat Playback  
Press [REPEAT] during playback (or programmed playback) of  
the title (or track) you want to repeat.  
Each time the button is pressed, the repeat mode will be changed  
as follows.  
[DVD]  
PICTURE  
MODE  
z/ON LAST MEMO  
OPEN/CLOSE  
PROGRAM  
TV screen  
Chapter  
FL display Operation  
SURROUND  
ON SCREEN  
REPEAT A-B REPEAT  
ANGLE  
/RANDOM  
ZOOM  
ANGLE  
REPEAT  
REPLAY  
REP 1  
Repeat of chapter being played  
SUBTITLE  
CHANGE  
SETUP  
MENU  
Title  
Off  
ALL REP Repeat of title being played  
Normal playback mode  
4
SUBTITLE  
ON/OFF  
ENT  
b
a
AUDIO  
TOP MENU  
RETURN  
5
REV SLOW  
FWD SLOW  
[CD]  
During Normal Playback  
PAUSE/STEP  
TV screen  
FL display Operation  
REP 1 Repeat of track being played  
ALL REP Repeat all tracks  
1
All  
Off  
Normal playback mode  
During Programmed Playback  
TV screen FL display Operation  
Program 1  
During Random Playback  
TV screen  
FL display Operation  
REP 1 Repeat of track being played  
REP 1  
Repeat the programmed track  
being played  
1
All  
Off  
ALL REP Repeat all tracks at random  
Original random playback mode  
Program All ALL REP Repeat all programmed tracks  
Off  
Original programmed playback  
mode  
Point A  
Point B  
Designated Range Repeat Playback  
(A-B Repeat)  
1. Press [A-B REPEAT] during playback at the beginning of the  
section you want to repeat (Point A).  
A-appears on the TV screen.  
A-appears on the FL display.  
2. Press [A-B REPEAT] again at the end of the section you want  
to repeat (Point B).  
PICTURE  
Bappears briefly on the TV screen.  
z/ON LAST MEMO  
OPEN/CLOSE  
MODE  
Bappears, and A-Bremains lit on the FL display.  
PROGRAM  
SURROUND  
ON SCREEN  
REPEAT A-B REPEAT  
ANGLE  
/RANDOM  
A-B REPEAT  
The section between points A and B is played repeatedly.  
ZOOM  
ANGLE  
REPLAY  
SUBTITLE  
CHANGE  
SETUP  
MENU  
3. To return to normal playback, press [A-B REPEAT] again.  
4
SUBTITLE  
ON/OFF  
Offappears briefly on the TV screen.  
ENT  
b
a
AUDIO  
TOP MENU  
RETURN  
5
Note:  
REV SLOW  
FWD SLOW  
Repeat playback or A-B repeat playback mode may not work  
correctly with some discs.  
PAUSE/STEP  
Important Note:  
may appear on the TV screen during operation. This icon  
means that the function is not available on the disc now.  
Download from Www.Somanuals.-cEom1.9A-ll Manuals Search And Download.  
PICTURE  
MODE  
z/ON LAST MEMO  
OPEN/CLOSE  
Random Playback [CD]  
PROGRAM  
SURROUND  
ON SCREEN  
REPEAT A-B REPEAT  
ANGLE  
/RANDOM  
1. Press [PROGRAM/RANDOM] once in the stop mode.  
1
ZOOM  
ANGLE  
REPLAY  
Randomappears on the TV screen.  
SUBTITLE  
CHANGE  
SETUP  
MENU  
4
SUBTITLE  
ON/OFF  
2. Press [aPLAY] to begin random playback.  
RNDappears on the FL display.  
The unit will automatically select tracks at random.  
ENT  
b
a
AUDIO  
TOP MENU  
RETURN  
5
REV SLOW  
FWD SLOW  
PAUSE/STEP  
Notes:  
n(Stop)  
PREV  
NEXT  
To stop random playback, press [n].  
[A-B REPEAT] and [SEARCH MODE] do not work during  
Random Playback.  
PLAY  
2
REV  
FWD  
Important Note:  
may appear on the TV screen during operation. This icon  
means that the function is not available on the disc now.  
PICTURE  
MODE  
z/ON LAST MEMO  
OPEN/CLOSE  
PROGRAM  
SURROUND  
ON SCREEN  
REPEAT A-B REPEAT  
ANGLE  
/RANDOM  
Programmed Playback [CD]  
Up to 20 selections can be programmed.  
1
ZOOM  
ANGLE  
REPLAY  
SUBTITLE  
CHANGE  
SETUP  
MENU  
4
Programming procedure  
1. Press [PROGRAM/RANDOM] twice in the stop mode.  
SUBTITLE  
ON/OFF  
ENT  
b
a
AUDIO  
TOP MENU  
RETURN  
Program Modescreen appears.  
5
3
REV SLOW  
FWD SLOW  
2. Press the number buttons to select the track number.  
Example:  
PAUSE/STEP  
PREV  
NEXT  
To select Track No.3, press [0], then [3].  
To select Track No.10, press [1], then [0].  
To select Track No.24, press [2], then [4].  
Notes:  
PLAY  
5
2
REV  
FWD  
CLEAR  
1
4
7
2
5
8
3
6
9
C
CLEAR  
0
If you make a mistake, press [CLEAR].  
To quit the Program Modescreen, press [PROGRAM/  
RANDOM].  
SEARCH  
MODE  
3. Press [p] to move the highlighted box down.  
To clear the program one by one  
1. Press [PROGRAM/RANDOM] twice to display the Program  
Example:  
Modescreen.  
Program Mode  
All Clear  
2. Press [4] or [5] to select the track number.  
3. Press [CLEAR].  
1 03  
2 --  
3 --  
4 --  
5 --  
6 --  
7 --  
8 --  
9 --  
10 --  
11 --  
12 --  
13 --  
14 --  
15 --  
16 --  
17 --  
18 --  
19 --  
20 --  
To clear all the programs  
1. Press [PROGRAM/RANDOM] twice to display the Program  
Modescreen.  
2. Press [4] to select All Clear.  
4. Repeat steps 2 and 3 as above to select another track.  
3. Press [ENT].  
5. Press [aPLAY] to start playback.  
PGMappears on the FL display.  
To change the program  
When all programmed selections have played, the unit stops  
automatically.  
1. Press [PROGRAM/RANDOM] twice to display the Program  
Modescreen.  
The program contents are retained in memory.  
2. Press [4] or [5] to select the track number.  
Note:  
To play the program again, press [PROGRAM/RANDOM] twice  
to call up the Program Modescreen, then press [aPLAY].  
3. Press the number buttons to select the track number to be  
replaced.  
Note:  
To quit the Program Modescreen, press [PROGRAM/  
RANDOM].  
Download from Www.Somanuals.-cEom2.0A-ll Manuals Search And Download.  
Selecting Subtitle Language [DVD]  
This operation works only with discs on which multiple subtitle  
languages are recorded.  
PICTURE  
MODE  
z/ON LAST MEMO  
OPEN/CLOSE  
1. Press [SUBTITLE ON/OFF] during playback.  
PROGRAM  
SURROUND  
ON SCREEN  
REPEAT A-B REPEAT  
ANGLE  
/RANDOM  
The subtitle language mark appears. (Example:  
If Offappears, press the button again.  
1/3 en)  
ZOOM  
ANGLE  
REPLAY  
SUBTITLE  
CHANGE  
SETUP  
MENU  
4
2
1
2. Press [SUBTITLE CHANGE] repeatedly until the desired  
subtitle language appears on the TV screen.  
SUBTITLE  
ON/OFF  
ENT  
b
a
AUDIO  
TOP MENU  
RETURN  
After a few seconds, “  
disappears.  
5
Example:  
REV SLOW  
FWD SLOW  
PAUSE/STEP  
3/3 fr  
French  
Notes:  
In some cases, the subtitle language is not changed to the  
selected one.  
When a disc supporting closed caption is played, the subtitle  
and the closed caption may overlap each other on the TV  
screen. In this case, turn the subtitle off.  
Important Note:  
may appear on the TV screen during operation. This icon  
means that the function is not available on the disc now.  
When the desired language is not selected even if the button  
is pressed, the language is not available on the disc.  
When the power is turned on or the disc is replaced, select  
the subtitle language again.  
If the subtitle language is not necessary, press [SUBTITLE  
ON/OFF] to select “  
Off.  
Please refer to Setting Language" on page E27.  
Selecting Audio Soundtrack Language  
(Multi-Language) [DVD]  
This operation works only with discs on which multiple audio  
soundtrack languages are recorded.  
Hello!  
Holà!  
¡Hola!  
1. Press [AUDIO] during playback.  
2. Press [AUDIO] repeatedly until the desired language appears  
PICTURE  
MODE  
z/ON LAST MEMO  
OPEN/CLOSE  
on the TV screen.  
Examples:  
PROGRAM  
SURROUND  
ON SCREEN  
REPEAT A-B REPEAT  
ANGLE  
/RANDOM  
ZOOM  
ANGLE  
REPLAY  
SUBTITLE  
CHANGE  
SETUP  
MENU  
4
SUBTITLE  
ON/OFF  
1/4 fr  
French  
ENT  
b
a
AUDIO  
TOP MENU  
RETURN  
5
1, 2  
REV SLOW  
FWD SLOW  
PAUSE/STEP  
1/3 DTS  
DTS sound  
(If using an amplifier with DTS Decoder, the DTS sound will  
be heard. See page E10 for the amplifier connection.)  
Notes:  
When the desired language is not selected even if the button  
is pressed, the language is not available on the disc.  
When the power is turned on or the disc is replaced, select  
the language again.  
If the language is not recorded on the disc, only the available  
language on the disc will be heard.  
Download from Www.Somanuals.-cEom2.1A-ll Manuals Search And Download.  
For improvement, on-screen displays subject to change  
without notice.  
Selecting On-Screen Information  
Press [ON SCREEN] repeatedly to show the disc information  
(Title, Chapter, Title elapsed playing time, Language, etc.).  
Example for DVD:  
Example for Audio CD:  
1. Press [ON SCREEN] during playback.  
1. Press [ON SCREEN].  
Chapter remaining playing time  
Title elapsed playing time  
Track elapsed playing time  
02:29  
00:08:20 00:01:45  
2. Press [ON SCREEN] again.  
Track elapsed playing time  
2. Press [ON SCREEN] again.  
CD  
Track 2/22  
02:29  
Chapter remaining playing time  
Title elapsed playing time  
Track number  
Chapter number  
Title number  
3. Press [ON SCREEN] to close the disc information.  
DVD  
Title 1/2  
Audio  
00:08:40 00:00:23  
Chapter 3/35 1/3  
PICTURE  
MODE  
z/ON LAST MEMO  
OPEN/CLOSE  
1/4 Dolby D 5.1 Ch en  
2/3 fr  
PROGRAM  
SURROUND  
/RANDOM  
REPEAT A-B REPEAT  
ANGLE  
Subtitle  
ON SCREEN  
ZOOM  
ANGLE  
REPLAY  
ON SCREEN  
Camera angle  
A kind of audio  
Audio language  
SUBTITLE  
CHANGE  
SETUP  
MENU  
4
SUBTITLE  
ON/OFF  
Subtitle language  
ENT  
b
a
AUDIO  
TOP MENU  
RETURN  
5
3. Press [ON SCREEN] to close the disc information.  
Selecting Picture Mode  
SelectingSpatializerN-2-2TM VirtualSurround  
Press [PICTURE MODE] to show the picture mode.  
Each time the button is pressed, the picture mode changes as  
follows:  
Sound Mode [DVD] [CD]  
Press [SURROUND] to set the Spatializer N-2-2 Virtual Surround  
Sound.  
Onappears briefly on the TV screen.  
Standard x Mild x Black and White x Standard ...  
3Dappears on the FL display.  
Press the button again to return to the original mode.  
PICTURE MODE  
Offappears briefly on the TV screen.  
3Ddisappears.  
PICTURE  
MODE  
z/ON LAST MEMO  
OPEN/CLOSE  
PROGRAM  
SURROUND  
ON SCREEN  
REPEAT A-B REPEAT  
ANGLE  
/RANDOM  
Portions of this product are licensed from Desper Products, Inc.,  
a subsidiary of Spatializer Audio Laboratories, Inc. Copyright  
©1997-2002 Spatializer Audio Laboratories, Inc. All Rights  
Reserved Worldwide. Spatializer®, N-2-2and the circle-in-  
square device are trademarks of Desper Products, Inc.  
SURROUND  
ZOOM  
ANGLE  
REPLAY  
SUBTITLE  
CHANGE  
SETUP  
MENU  
4
SUBTITLE  
ON/OFF  
ENT  
b
a
AUDIO  
TOP MENU  
RETURN  
5
Important Note:  
may appear on the TV screen during operation. This icon  
means that the function is not available on the disc now.  
Download from Www.Somanuals.-cEom2.2A-ll Manuals Search And Download.  
MP3/WMA CD OPERATION  
Before Starting  
This unit can play back the CD that has recorded music data,  
MP3 or WMA (Windows Media Audio) files.  
MP3/WMA CD Playback  
2
1, 3  
The file system is ISO9660 Level 1 and Level 2.  
If the CD has both audio CD tracks and MP3/WMA files, only  
audio CD tracks are played.  
f
e
n
a
q
z/ON  
It would take 30 seconds or more for this unit to read MP3/  
WMA files depending on its structure.  
This unit can recognize up to 256 files or folders per disc. The  
CD with 257 files or folders and over is not available to this  
unit.  
MP3/WMA CDs may not be played in the recorded order.  
1. Please use the MP3 or WMA software with the function  
that can record data alphabetically or numerically.  
2. Please refrain from making many sub-folders by  
preference.  
PICTURE  
z/ON LAST MEMO  
OPEN/CLOSE  
MODE  
1, 3  
PROGRAM  
SURROUND  
/RANDOM  
REPEAT A-B REPEAT  
ANGLE  
ON SCREEN  
ZOOM  
ANGLE  
REPLAY  
However, some CD-R/RWs cannot be played back depending  
on the recording conditions.  
1. Press [q] (or [OPEN/CLOSE] on the remote control).  
Before playing back MP3 or WMA files, please read the following.  
OPENappears on the FL display, and the disc tray  
opens.  
MP3 CD  
Note:  
MP3 files must have the extension letters, .MP3or .mp3.  
Standard, sampling frequency, and the bit rate:  
MPEG-1 Audio  
To open or close the disc tray, be sure to press [q] (or  
[OPEN/CLOSE] on the remote control). Do not press the disc  
tray with your hand.  
32kHz, 44.1kHz, 48kHz  
32kbps ~ 320kbps (constant bit rate or variable bit rate)  
The recommend recording setting for a high-quality sound is  
44.1kHz of sampling frequency and 128kbps of constant bit  
rate.  
2. Place the disc with the label facing up on the disc tray.  
WMA CD  
When creating a WMA disc, be sure the copyright function is  
off.  
WMA files must have the extension letters, .WMAor .wma.  
Standard, sampling frequency, and the bit rate:  
WMA version 7, and 8  
32kHz, 48kbps ~ 64kbps  
44.1kHz, 48kbps ~ 192kbps  
3. Press [q] (or [OPEN/CLOSE] on the remote control).  
The disc tray closes.  
FILEappears on the FL display.  
A table of contents in the first directory appears on the TV  
screen.  
48kHz, 128kbps ~ 192kbps  
Example:  
DRM files cannot be played back.  
Microsoft, Windows Media, and Windows Logo are trademarks  
or registered trademarks of Microsoft Corporation in both the  
United States and other countries.  
File  
-/24  
00:00:00  
HYPER-EURO-MAX  
1
2
3
4
5
6
7
MUSIC001  
MUSIC002  
MUSIC003  
MUSIC004  
MUSIC005  
MUSIC006  
MUSIC007  
8
9
10  
11  
12  
MUSIC008  
MUSIC009  
MUSIC010  
MUSIC011  
MUSIC012  
LIMITATIONS ON DISPLAY  
Available letters for display are the following: capital or small  
alphabets of A through Z, and numbers of 0 through 9.  
Other letters than those above are replaced in -(hyphen).  
CAUTION:  
Some MP3/WMA CDs cannot be played back depending on  
the recording conditions.  
File: MAX  
The CD has no music data or non-MP3/WMA files cannot be  
played back.  
File information  
Note:  
If the disc is loaded with the label side downward, or if a badly  
scratched disc is loaded, No Playappears on the TV screen.  
If this occurs, load the disc correctly or replace the disc.  
Download from Www.Somanuals.-cEom2.3A-ll Manuals Search And Download.  
Stopping Playback  
PICTURE  
MODE  
z/ON LAST MEMO  
OPEN/CLOSE  
Press [n] during playback. nappears briefly on the TV screen  
and playback stops completely.  
PROGRAM  
SURROUND  
/RANDOM  
REPEAT A-B REPEAT  
ANGLE  
ON SCREEN  
ZOOM  
ANGLE  
REPLAY  
SUBTITLE  
CHANGE  
SETUP  
MENU  
4
Pause  
SUBTITLE  
ON/OFF  
5
5
ENT  
b
a
4
Press [kPAUSE/STEP] during playback.  
AUDIO  
TOP MENU  
RETURN  
5
kappears briefly on the TV screen.  
kappears on the FL display.  
REV SLOW  
FWD SLOW  
PAUSE/STEP  
PLAY  
Note:  
The sound is muted.  
PREV  
NEXT  
Press [aPLAY] to return to normal playback.  
REV  
FWD  
4. Press [o], [a], [p] or [b] to move the highlighted box to the  
File Skip  
desired file.  
Skipping forward  
To go on to the next or previous directory, press [o], [a],  
[p] or [b].  
Press [NEXT e] during playback to skip to the next file.  
eappears briefly on the TV screen.  
To go back to the previous directory, press [RETURN].  
In some discs, if [MENU] is pressed, it goes back to the  
first directory.  
Skipping backward  
Press [PREV f] during playback to skip back to the beginning  
of the file currently play.  
fappears briefly on the TV screen.  
Press the button again immediately to skip back to the beginning  
of the previous file.  
5. Press [ENT] (or [aPLAY]) to start playback.  
aappears briefly on the TV screen.  
The letters color in the highlighted box turns green.  
MP3or WMAappears on the FL display.  
PICTURE  
MODE  
z/ON LAST MEMO  
OPEN/CLOSE  
Example: (the second directory)  
Current file elapsed playing time  
Total file number  
Current file number  
PROGRAM  
SURROUND  
ON SCREEN  
REPEAT A-B REPEAT  
ANGLE  
/RANDOM  
ZOOM  
ANGLE  
REPLAY  
REPEAT  
SUBTITLE  
CHANGE  
SETUP  
MENU  
4
SUBTITLE  
ON/OFF  
ENT  
b
a
AUDIO  
TOP MENU  
RETURN  
5
PAUSE  
/STEP  
REV SLOW  
FWD SLOW  
File  
MAX2  
13/24 00:00:08  
PAUSE/STEP  
PLAY  
PREV  
NEXT  
PREV  
NEXT  
n(Stop)  
13  
14  
15  
16  
17  
18  
19  
MUSIC013  
MUSIC014  
MUSIC015  
MUSIC016  
MUSIC017  
MUSIC018  
MUSIC019  
20  
21  
22  
23  
24  
MUSIC020  
MUSIC021  
MUSIC022  
MUSIC023  
MUSIC024  
REV  
FWD  
CLEAR  
PLAY  
1
2
3
C
Repeat Playback  
Press [REPEAT] during playback.  
Each time the button is pressed, the repeat mode will be changed  
as follows.  
Song: MUSIC013  
TV screen  
FL display  
REP 1  
Operation  
1
Repeat of file being played  
Repeat all files  
All  
Off  
ALL REP  
Normal playback mode  
Note:  
Important Note:  
Repeat playback may not work correctly with some discs.  
may appear on the TV screen during operation. This icon  
means that the function is not available on the disc now.  
Download from Www.Somanuals.-cEom2.4A-ll Manuals Search And Download.  
PICTURE DISC OPERATION  
2. Press [o], [a], [p] or [b] to move the cursor to the desired  
picture.  
To go to the next or previous thumbnail pictures, press  
[NEXT e] or [PREV f].  
KODAK Picture CD Playback  
With KODAK Picture CD, its easy to turn film into pictures you  
can email from your PC and view on this DVD video player!  
Just bring your film in for processing, and check the box for  
KODAK Picture CD. Youll get back your prints and negatives as  
usual - plus youll get a special CD that contains your pictures  
along with software that lets you view, enhance, share, and print  
your pictures from your computer and view them on this DVD  
video player.  
3. Press [ENT] (or [a PLAY]) to start the slide show from the  
selected picture.  
If you press [kPAUSE/STEP] during the slide show, the  
slide show stops temporary. k" appears briefly.  
Press [a PLAY] (or [NEXT e]) again to resume the  
slide show.  
If the picture appears upside down or sideways, do  
the following steps.  
1) Press [kPAUSE/STEP], if necessary.  
2) Press [ANGLE] repeatedly until its right side up.  
PICTURE  
z/ON LAST MEMO  
OPEN/CLOSE  
MODE  
OPEN/  
PROGRAM  
SURROUND  
/RANDOM  
REPEAT A-B REPEAT  
ANGLE  
CLOSE  
ON SCREEN  
ZOOM  
ANGLE  
REPLAY  
ANGLE  
MENU  
4, a, 5, b  
SUBTITLE  
CHANGE  
SETUP  
MENU  
, “  
, “  
or Normalappears briefly  
4
SUBTITLE  
ON/OFF  
ENT  
on the TV screen.  
ENT  
b
a
AUDIO  
TOP MENU  
RETURN  
3) Press [a PLAY] (or [k PAUSE/STEP]) to skip to the  
next picture and continue the slide show.  
If you press [NEXT e] or [PREV f] during the slide  
show, it skips to the next picture or previous picture.  
5
TOP MENU  
PAUSE  
/STEP  
REV SLOW  
FWD SLOW  
PAUSE/STEP  
PLAY  
PREV  
NEXT  
PREV  
NEXT  
n(Stop)  
After the last picture has displayed, the last thumbnail pictures  
appear.  
REV  
FWD  
CLEAR  
PLAY  
1
4
7
2
3
6
9
C
Number  
button  
To stop the slide show, press [n]. The thumbnail pictures  
appear.  
0
5
8
SEARCH  
MODE  
If [TOP MENU] is pressed during the slide show, the  
thumbnail pictures appear.  
1. Load the disc with the label facing up on the disc tray.  
Notes:  
(Please refer to MP3/WMA CD OPERATIONon page E23.)  
If you press [MENU], the file list appears.  
Example:  
PHOtOappears on the FL display.  
Picture CDappears briefly on the TV screen.  
The first thumbnail pictures (maximum 9-picture) appear  
on the TV screen.  
Picture CD  
PICTURES  
-/37 00:00:00  
Example:  
1
2
3
4
5
6
7
001-1A  
002-2A  
003-3A  
004-4A  
005-5A  
006-6A  
007-7A  
8
9
008-8A  
009-9A  
10  
11  
12  
13  
14  
010-10A  
011-11A  
012-12A  
013-13A  
014-14A  
File: 001-1A  
If you start the slide show from the file list...  
1) Press [o], [a], [p] or [b] to move the highlighted box to the  
desired file.  
2) Press [ENT] (or [aPLAY]) to start the slide show.  
The file list appears after the last picture has displayed.  
If you press [TOP MENU], the thumbnail pictures appear.  
FUJICOLOR CD can be used.  
Some discs cannot be played back depending on the recording  
conditions.  
KODAK and Picture CD are registered trademarks of Eastman  
Kodak Company.  
Download from Www.Somanuals.-cEom2.5A-ll Manuals Search And Download.  
JPEG CD Playback  
You can also view digital images from JPEG files on disc created  
by your computer.  
Picture Zoom  
1. Press [kPAUSE/STEP] at the desired picture (KODAK Picture  
CD and JPEG CD).  
It would take 30 seconds or more for this unit to read the  
JPEG files depending on its structure.  
2. Press [ZOOM].  
Some JPEG files cannot be played back depending on the  
recording conditions.  
3. Press [o], [a], [p], [b] and [ENT] (or number buttons).  
The picture is magnified.  
1. Load the disc with the label facing up on the disc tray.  
(For more details, please refer to Picture Zoomon page  
E18.)  
(Please refer to MP3/WMA CD OPERATIONon page E23.)  
FILEappears on the FL display.  
The file list appears on the TV screen.  
4. Press [aPLAY] to resume the slide show.  
Example:  
File  
1/43 00:00:00  
Root  
If the disc is mixed with MP3, WMA and JPEG files…  
1. Press [o], [a], [p] or [b] to move the highlighted box to the  
desired file.  
1
2
3
4
5
6
7
001  
002  
003  
004  
005  
006  
007  
8
9
008  
009  
010  
011  
012  
013  
014  
2. Press [ENT] (or [aPLAY]) to start playback (or slide show).  
If you start from the MP3 or WMA file, the unit plays both  
MP3 and WMA files. But the unit skips the JPEG files  
automatically.  
10  
11  
12  
13  
14  
If you start from the JPEG file, the unit plays the JPEG  
files. But the unit skips both MP3 and WMA files  
automatically.  
File: 001  
2. Press [o], [a], [p] or [b] to move the highlighted box to the  
desired file.  
3. Press [ENT] (or [a PLAY]) to start the slide show from the  
selected file.  
PHOtOappears on the FL display.  
If you press [kPAUSE/STEP] during the slide show, the  
slide show stops temporary. k" appears briefly.  
Press [a PLAY] (or [NEXT e]) again to resume the  
slide show.  
If the picture appears upside down or sideways, do  
the following steps.  
1) Press [kPAUSE/STEP], if necessary.  
2) Press [ANGLE] repeatedly until its right side up.  
, “  
, “  
or Normalappears briefly  
on the TV screen.  
3) Press [a PLAY] (or [k PAUSE/STEP]) to skip to the  
next picture and continue the slide show.  
If you press [NEXT e] or [PREV f] during the slide  
show, it skips to the next file or previous file.  
After the last file has displayed, the file list appears.  
Notes:  
To stop the slide show, press [n]. The file list appears.  
If the disc is loaded with the label side downward, or if a badly  
scratched disc is loaded, No Playappears on the TV screen.  
If this occurs, load the disc correctly or replace the disc.  
Important Note:  
may appear on the TV screen during operation. This icon  
means that the function is not available on the disc now.  
Download from Www.Somanuals.-cEom2.6A-ll Manuals Search And Download.  
INITIAL SETTINGS  
Once the initial settings have been completed, the unit can  
Notes:  
always be operated under the same conditions.  
The settings will be retained in the memory until they are changed,  
even if the power is turned off.  
In this instruction manual, the language in on-screen  
display is English.  
If you change the language, please follow the selected  
language in on-screen display.  
You cannot switch audio sound track languages if there is  
only one language recorded on the disc.  
When you play back a DVD video disc, the unit automatically  
displays the pre-selected subtitle language if it is included  
on the disc.  
If Othersis selected, enter the language code. (See  
LANGUAGE CODE LISTon page E31.)  
For improvement, on-screen displays subject to change  
without notice.  
Setting Language  
1. Press [SETUP] in the stop mode.  
The setup screen appears.  
Languageis highlighted.  
Language  
Display  
Digital Out  
Parental  
2. Press [ENT].  
Languagescreen appears.  
3. Press [p] or [o] to select the item (highlighted).  
Example:  
PICTURE  
MODE  
z/ON LAST MEMO  
OPEN/CLOSE  
PROGRAM  
SURROUND  
ON SCREEN  
REPEAT A-B REPEAT  
ANGLE  
/RANDOM  
Language  
Display  
Digital Out  
Parental  
ZOOM  
ANGLE  
REPLAY  
SUBTITLE  
CHANGE  
SETUP  
MENU  
4
o
p
SETUP  
ENT  
SUBTITLE  
ON/OFF  
OSD  
English  
ENT  
b
a
Audio  
Subtitle  
DVD Menu  
Disc  
Disc  
Disc  
AUDIO  
TOP MENU  
RETURN  
5
REV SLOW  
FWD SLOW  
PAUSE/STEP  
PLAY  
PREV  
NEXT  
4. Press [ENT].  
The submenu appears.  
Example:  
REV  
FWD  
CLEAR  
1
4
7
2
3
6
9
C
0
5
8
SEARCH  
MODE  
Language  
OSD  
Audio  
Subtitle  
DVD Menu  
Display  
Digital Out  
Parental  
English  
English  
Disc  
Español  
Français  
Deutsch  
Disc  
Disc  
Portugues  
5. Press [p] or [o] to select the language (highlighted).  
6. Press [ENT].  
The selected language remains.  
7. Repeat steps 3 ~ 6 for other items.  
Note:  
If Othersis selected, enter the language code. (See  
LANGUAGE CODE LISTon page E31.)  
8. Press [o] to skip back to the setup screen (or press [SETUP]).  
Download from Www.Somanuals.-cEom2.7A-ll Manuals Search And Download.  
Setting Display  
1. Press [SETUP] in the stop mode.  
The setup screen appears.  
PICTURE  
MODE  
z/ON LAST MEMO  
OPEN/CLOSE  
Language  
Display  
Digital Out  
Parental  
PROGRAM  
SURROUND  
ON SCREEN  
REPEAT A-B REPEAT  
ANGLE  
/RANDOM  
ZOOM  
ANGLE  
REPLAY  
2. Press [a] to select Display.  
SUBTITLE  
CHANGE  
SETUP  
MENU  
4
o
SETUP  
ENT  
SUBTITLE  
ON/OFF  
ENT  
3. Press [ENT].  
b
a
a
p
AUDIO  
TOP MENU  
RETURN  
Displayscreen appears.  
5
REV SLOW  
FWD SLOW  
PAUSE/STEP  
PLAY  
Language  
Display  
Digital Out  
Parental  
PREV  
NEXT  
REV  
FWD  
CLEAR  
Dimmer  
TV Type  
Normal  
4:3 LB  
1
4
7
2
3
6
9
C
0
5
8
SEARCH  
MODE  
4. Press [ENT] again.  
The submenu (FL display brightness on the player, Normal”  
and Dark) appears.  
Dimmer  
TV Type  
Normal  
4:3 LB  
Normal  
Dark  
5. Press [p] or [o] to select the FL display brightness.  
Example: To select Dark”  
4:3 LB (Letterbox):  
Select when a conventional TV set is  
connected.  
When the wide screen disc is played  
back, the black bands appear at the  
top and bottom of screen.  
Dimmer  
TV Type  
Normal  
4:3 LB  
Normal  
Dark  
6. Press [ENT].  
(In this example, Dimmer Darkremains.)  
7. Press [p] to select TV Type.  
8. Press [ENT].  
4:3 PS (Panscan):  
Select when a conventional TV set is  
connected.  
When the wide screen disc is played  
back, it displays pictures cropped to  
fill to your TV screen. The left and  
right edges are cut off.  
The submenu (4:3 LB, 4:3 PSand 16:9) appears.  
Dimmer  
TV Type  
Drak  
4:3 LB  
4:3 LB  
4:3 PS  
16:9  
Cut off  
Cut off  
16:9 :  
Select when a wide screen TV set is  
connected.  
Played in FULLsize. (Setting the  
wide screen TV to FULLmode is  
also necessary.)  
9. Press [p] or [o] to select the appropriate setting for your TV  
screen size.  
Example: To select 4:3 PS”  
Dimmer  
TV Type  
Drak  
4:3 LB  
4:3 LB  
4:3 PS  
16:9  
Notes:  
The screen size may differ depending on the DVD video  
discs.  
If you select 16:9 to get rid of the black bands on screen  
when wide screen disc is played back, picture may be  
slightly distorted.  
10. Press [ENT].  
(In this example, TV Type 4:3 PSremains.)  
In some discs, even if 4:3 PS is selected, the black bands  
may remain on the screen.  
11. Press [o] to skip back to the setup screen (or press [SETUP]).  
Download from Www.Somanuals.-cEom2.8A-ll Manuals Search And Download.  
Setting Digital Out  
PICTURE  
MODE  
z/ON LAST MEMO  
OPEN/CLOSE  
PROGRAM  
SURROUND  
ON SCREEN  
REPEAT A-B REPEAT  
ANGLE  
/RANDOM  
If the optical DIGITAL OUT jack is connected to the amplifier, you  
must set as follows:  
ZOOM  
ANGLE  
REPLAY  
SUBTITLE  
CHANGE  
SETUP  
MENU  
4
o
SETUP  
ENT  
1. Press [SETUP] in the stop mode.  
The setup screen appears.  
SUBTITLE  
ON/OFF  
ENT  
b
a
a
p
AUDIO  
TOP MENU  
RETURN  
5
REV SLOW  
FWD SLOW  
PAUSE/STEP  
PLAY  
Language  
Display  
Digital Out  
Parental  
PREV  
NEXT  
2. Press [a] to select Digital Out.  
REV  
FWD  
CLEAR  
1
4
7
2
3
6
9
C
3. Press [ENT].  
0
5
8
Digital Outscreen appears.  
SEARCH  
MODE  
Language  
Display  
Digital Out  
Parental  
96kHz LPCM  
Dolby Digital  
DTS  
48 kHz LPCM  
96kHz LPCM (96kHz Liner Pulse Code Modulation):  
If your amplifier is available for 96kHz sampling, select 96kHz  
LPCM. If not, select 48kHz LPCM.  
LPCM  
Off  
MPEG  
LPCM  
Notes:  
When 48kHz LPCMis set, there are 48kHz LPCM audio  
signals from the AUDIO OUT jacks, not 96kHz LPCM audio  
signals.  
When playing back the DVD video disc which recorded with  
96kHz LPCM, there is no digital output.  
4. Press [p] or [o] to select the item (highlighted).  
5. Press [ENT].  
The submenu appears.  
Example:  
But playing back the DVD video disc with no copyright  
protection, the sound is original recorded sound.  
96kHz LPCM  
Dolby Digital  
DTS  
48 kHz LPCM  
LPCM  
LPCM  
BitStream  
Dolby Digital:  
Off  
If your amplifier has Dolby Digital Decoder, select BitStream.  
If not, select LPCM.  
MPEG  
LPCM  
6. Press [p] or [o] to select the submenu (highlighted).  
DTS:  
Example: To select Dolby Digital BitStream”  
If your amplifier has DTS Decoder, select On. If not, select  
Off.  
96kHz LPCM  
Dolby Digital  
DTS  
48 kHz LPCM  
LPCM  
LPCM  
BitStream  
MPEG (Moving Picture Expert Group):  
If your amplifier has MPEG2 Decoder, select BitStream. If not,  
select LPCM.  
Off  
MPEG  
LPCM  
7. Press [ENT].  
(In this example, Dolby Digital BitStreamremains.)  
8. Repeat steps 4 ~ 7 for other items.  
9. Press [o] to skip back to the setup screen (or press [SETUP]).  
Download from Www.Somanuals.-cEom2.9A-ll Manuals Search And Download.  
Setting Parental  
ANGLE  
REPLAY  
ON SCREEN  
ZOOM  
ANGLE  
1. Press [SETUP] in the stop mode.  
The setup screen appears.  
SUBTITLE  
CHANGE  
SETUP  
MENU  
o
4
SETUP  
ENT  
SUBTITLE  
ON/OFF  
ENT  
b
a
a
p
AUDIO  
TOP MENU  
RETURN  
5
Language  
Display  
Digital Out  
Parental  
Parental  
REV SLOW  
FWD SLOW  
PAUSE/STEP  
PLAY  
2. Press [a] to select Parental.  
PREV  
NEXT  
3. Press [ENT].  
REV  
FWD  
CLEAR  
Parentalscreen appears.  
1
4
7
2
3
6
9
C
CLEAR  
Number  
buttons  
0
5
8
SEARCH  
MODE  
Language  
Display  
Digital Out  
Password  
Level  
----  
Off  
4. Press [p] to skip Password ----and select Level.  
Parental Control  
Password  
Level  
----  
Off  
MPAA (Motion Picture Association of America) Guideline is a  
rating system that provides advanced cautionary information to  
parent about the content of movie programs.  
5. Press [ENT] repeatedly to select the parental lock level  
(Level Off~ Level 8).  
The parental lock level is equivalent to the following MPAA  
Rating System.  
Example: To select Level 1”  
Level 7: NC-17 (No one 17 and under admitted)  
Level 6: R (Restricted)  
Level 4: PG-13 (Parents strongly cautioned)  
Level 3: PG (Parental guidance suggested)  
Level 1: G (General audiences)  
Password  
Level  
----  
1
6. Press [o] to return to Password ----.  
Some DVD discs contain a restriction level which enables  
parents to prevent playback of discs by children. This unit is  
equipped with a password designed to prevent children changing  
the level.  
7. Enter a number in 4 digits.  
Password  
Level  
1
You cannot play DVD video discs rated higher than the level  
you selected unless you cancel the parental lock function.  
For example, when you select level 5, the unit will not play  
discs with ratings of 6, 7or 8.  
Note:  
If you make a mistake, press [CLEAR].  
8. Press [ENT].  
The information will appear on the TV screen.  
The password is now set.  
If you forget the password…  
Enter 788444even if 4 digits ----appears, then press [ENT]  
to clear the current password.  
Password  
Level  
----  
1
Enter a new password and set the parental lock level again.  
Note:  
If you do not set it, Parental Control does not work, and it  
returns to the initial settings.  
Note:  
DVD video discs may or may not respond to the parental lock  
settings. Make sure this function works with your DVD video  
discs.  
9. Press [SETUP].  
The setup screen disappears.  
Download from Www.Somanuals.-cEom3.0A-ll Manuals Search And Download.  
LANGUAGE CODE LIST  
Enter the appropriate code number for the initial settings Audio, Subtitleand DVD Menuon page E27.  
Code Abbreviation  
of the  
Language  
Code Abbreviation  
of the  
Language  
Code Abbreviation  
of the  
Language  
language  
language  
language  
6565  
6566  
6570  
6577  
6582  
6583  
6589  
6590  
6665  
6669  
6671  
6672  
6673  
6678  
6679  
6682  
6765  
6779  
6783  
6789  
6865  
6869  
6890  
6976  
6978  
6979  
6983  
6984  
6985  
7065  
7073  
7074  
7079  
7082  
7089  
7165  
7168  
7176  
7178  
7185  
7265  
7273  
7282  
7285  
7289  
7365  
aa  
ab  
af  
am  
ar  
as  
ay  
az  
ba  
be  
bg  
bh  
bi  
Afar  
7369  
7375  
7378  
7383  
7384  
7387  
7465  
7473  
7487  
7565  
7575  
7576  
7577  
7578  
7579  
7583  
7585  
7589  
7665  
7678  
7679  
7684  
7686  
7771  
7773  
7775  
7776  
7778  
7779  
7782  
7783  
7784  
7789  
7865  
7869  
7876  
7879  
7967  
7977  
7982  
8065  
8076  
8083  
8084  
8185  
8277  
ie  
ik  
in  
is  
it  
iw  
ja  
Interlingue  
Inupiak  
Indonesian  
Icelandic  
Italian  
Hebrew  
Japanese  
Yiddish  
Javanese  
Georgian  
Kazakh  
Greenlandic  
Cambodian  
Kannada  
Korean  
Kashmiri  
Kurdish  
Kirghiz  
Latin  
Lingala  
Laothian  
Lithuanian  
Latvian, Lettish  
Malagasy  
Maori  
Macedonian  
Malayalam  
Mongolian  
Moldavian  
Marathi  
8278  
8279  
8285  
8287  
8365  
8368  
8371  
8372  
8373  
8375  
8376  
8377  
8378  
8379  
8381  
8382  
8383  
8384  
8385  
8386  
8387  
8465  
8469  
8471  
8472  
8473  
8475  
8476  
8478  
8479  
8482  
8483  
8484  
8487  
8575  
8582  
8590  
8673  
8679  
8779  
8872  
8979  
9072  
9085  
rn  
ro  
ru  
rw  
sa  
sd  
sg  
sh  
si  
Kirundi  
Abkhazian  
Afrikaans  
Amharic  
Arabic  
Assamese  
Aymara  
Azerbaijani  
Bashkir  
Byelorussian  
Bulgarian  
Bihari  
Bislama  
Bengali; Bangla  
Tibetan  
Breton  
Catalan  
Corsican  
Czech  
Romanian  
Russian  
Kinyarwanda  
Sanskrit  
Sindhi  
Sangro  
Serbo-Croatian  
Singhalese  
Slovak  
ji  
jw  
ka  
kk  
kl  
km  
kn  
ko  
ks  
ku  
ky  
la  
sk  
sl  
Slovenian  
Samoan  
Shona  
sm  
sn  
so  
sq  
sr  
ss  
st  
su  
sv  
sw  
ta  
te  
tg  
th  
ti  
tk  
tl  
tn  
to  
bn  
bo  
br  
Somali  
Albanian  
Serbian  
Siswati  
Sesotho  
Sundanese  
Swedish  
Swahili  
Tamil  
ca  
co  
cs  
cy  
da  
de  
dz  
el  
en  
eo  
es  
et  
eu  
fa  
fi  
fj  
fo  
Welsh  
Danish  
German  
Bhutani  
Greek  
ln  
lo  
lt  
lv  
Telugu  
Tajik  
Thai  
mg  
mi  
mk  
ml  
mn  
mo  
mr  
ms  
mt  
my  
na  
ne  
nl  
no  
oc  
om  
or  
pa  
pl  
English  
Esperanto  
Spanish  
Estonian  
Basque  
Persian  
Finnish  
Fiji  
Faeroese  
French  
Tigrinya  
Turkmen  
Tagalog  
Setswana  
Tonga  
Turkish  
Tsonga  
Tatar  
Malay  
Maltese  
Burmese  
Nauru  
Nepali  
Dutch  
Norwegian  
Occitan  
(Afan) Oromo  
Oriya  
Punjabi  
tr  
ts  
tt  
fr  
fy  
tw  
uk  
ur  
uz  
vi  
vo  
wo  
xh  
yo  
zh  
zu  
Twi  
Ukrainian  
Urdu  
Frisian  
Irish  
ga  
gd  
gl  
gn  
gu  
ha  
hi  
Scots Gaelic  
Galician  
Guarani  
Gujarati  
Hausa  
Uzbek  
Vietnamese  
Volapük  
Wolof  
Xhosa  
Hindi  
Polish  
Yoruba  
Chinese  
Zulu  
hr  
Croatian  
Hungarian  
Armenian  
Interlingua  
ps  
pt  
qu  
rm  
Pashto, Pushto  
Portuguese  
Quechua  
Rhaeto-Romance  
hu  
hy  
ia  
Download from Www.Somanuals.-cEom3.1A-ll Manuals Search And Download.  
TROUBLESHOOTING GUIDE  
If you have followed the instructions and are having difficulty operation the unit, locate the SYMPTOM in the left column below. Check  
the corresponding POSSIBLE CAUSE and CORRECTIVE ACTION columns to locate and remedy the problem.  
SYMPTOM  
POSSIBLE CAUSE  
CORRECTIVE ACTION  
Insert the power plug into the AC wall outlet.  
Load a disc.  
No power.  
No power plug connection at the AC wall outlet.  
The power is on, but the player does not No disc is loaded.  
work.  
No picture.  
An unplayable disc is loaded.  
Load a playable disc. (Check the disc logo, type,  
color system and regional code. See page E12.)  
The TV is not set to receive signal from the player. Select the correct input function on the TV.  
The video cable is not connected.  
The S-video cable is not connected.  
PROGRESSIVEmode is set.  
The TV is turned off.  
Connect the video cable into the jack.  
Connect the video cable into the jack.  
Select INTERLACEmode. (See page E13.)  
Turn on the TV.  
No sound.  
The audio cables are not connected.  
The audio equipment is turned off.  
Connect the audio cables into the jacks.  
Turn on the audio equipment connected with the  
audio cable.  
The playback picture is poor.  
An unplayable disc is loaded.  
Load a playable disc. (Check the disc logo, type,  
color system and regional code. See page E12.)  
The selected function does not operate on the disc The feature or action cannot be completed at this  
appears on the TV screen.  
now.  
time because:  
The feature is not available at the moment.  
The DVD software restricts it.  
The DVD software doesnt support the feature  
(e.g., angles).  
The unit does not start playback.  
No disc is loaded.  
Load a disc.  
An unplayable disc is loaded.  
Load a playable disc. (Check the disc logo, type,  
color system and regional code. See page E12.)  
The disc is loaded with the label side down.  
The disc is dirty.  
Load the disc on the disc tray correctly.  
Clean the disc or replace it. (See page E12.)  
PARENTALis set.  
Cancel the parental lock function or change the  
rating level. Reset it after play. (See page E30.)  
No Playappears on the TV screen.  
An unplayable disc is loaded.  
Load a playable disc. (Check the disc logo, type,  
color system and regional code. See page E12.)  
PARENTALis set.  
Cancel the parental lock function or change the  
rating level. Reset it after play. (See page E30.)  
The disc may not have the correct file or data.  
The disc tray may be locked.  
Load a playable disc.  
The disc tray does not open.  
Press the q button on the unit until Un-LOC”  
appears. (See page E14.)  
The FL display on the unit is dark.  
The display is set to Dark.  
Reset it to Normal. (See page E28.)  
Download from Www.Somanuals.-cEom3.2A-ll Manuals Search And Download.  
SYMPTOM  
POSSIBLE CAUSE  
The unit must be reset.  
CORRECTIVE ACTION  
1. Disconnect the power cord.  
The operation or display is not normal.  
2. Reconnect the power cord.  
3. Resume operation.  
The remote control does not work properly. The batteries in the remote control are weak, or Check the battery polarity (+ or -).  
installed incorrectly. Replace the batteries. (See page E4.)  
The remote control is not aimed at the remote Aim the remote control at the remote sensor window.  
sensor window. (See page E4.)  
SERVICING:  
Should this product require service, refer to the SANYO AUDIO/DVD limited warranty.  
If you do not have a convenient SANYO service station nearby, contact the SANYO dealer where you purchased the unit. Be sure to  
give the model number and explain the problem. The dealer will advise you how to obtain service.  
MAINTENANCE  
Cleaning the cabinet  
WARNING:  
Use a clean soft cloth moistened with plain lukewarm water and  
FOR YOUR PERSONAL SAFETY, BE SURE TO  
wrung dry. Never use benzol, benzene or other strong chemical  
DISCONNECT THE AC POWER CORD BEFORE  
cleaners since these could damage the finish of your unit. It is  
PROCEEDING WITH ANY MAINTENANCE OR CLEANING.  
important that no liquid reaches the inside of the unit.  
SPECIFICATIONS  
Type:  
DVD Video player  
AUDIO OUT:  
R: 2 V rms  
Signal format:  
L: 2 V rms  
NTSC color  
VIDEO OUT:  
Laser:  
1.0 Vp-p (75 )  
Semiconductor laser, wavelength 650 nm/790 nm  
Frequency range (digital audio):  
4 Hz to 44 kHz (DVD fs: 96 kHz)  
Signal to noise ratio:  
More than 105 dB  
Harmonic distortion (digital audio):  
0.003 %  
Wow and flutter:  
DIGITAL OUT:  
Optical  
Power requirements:  
AC 120 V, 60 Hz  
Power consumption:  
11 Watts  
Dimensions (W x H x D):  
Approx. 14.2" x 2.2" x 9.8" (360 x 55 x 250 mm)  
Weight:  
Below measurable level  
Outputs:  
Approx. 4.3 lbs (1.95 kg)  
S-VIDEO OUT:  
Y: 1.0 Vp-p (75 )  
C: 0.286 Vp-p (75 )  
COMPONENT VIDEO OUT:  
Y: 1.0 Vp-p (75 )  
PB: 0.7 Vp-p (75 )  
PR: 0.7 Vp-p (75 )  
IMPORTANT INFORMATION  
Because its products are subject to continuous improvement, SANYO reserves the right to modify product designs and specifications  
without notice and without incurring any obligation.  
Download from Www.Somanuals.-cEom3.3A-ll Manuals Search And Download.  
THE SANYO COMFORT WARRANTY  
AUDIO/VIDEO PRODUCTS  
WARRANTY BECOMES VOID  
WARRANTY APPLICATION  
New, unused Sanyo Audio/Video products purchased through  
a Sanyo authorized dealer in Canada are warranted against  
manufacturing defects in materials and workmanship for ONE  
YEAR from the date of purchase by the original retail purchaser.  
This warranty only applies in favor of the original retail purchaser  
of the warranted product.  
This warranty becomes void if the products serial numbers are  
altered or removed or if any repair to the product is made other  
than by SANYO Canada Inc. or by an authorized Sanyo Service  
Depot.  
LIMITATIONS  
(a) SANYO Canada Inc. reserves the right to change or improve  
the design of the model of the product warranted hereunder  
without incurring any obligation to make any modifications  
to or to install any improvement in or on the product.  
(b) In no event shall SANYO Canada Inc. or any of its Authorized  
Dealers be liable for special or consequential damage arising  
from the use of this product.  
SANYO CANADA INC.S RESPONSIBILITY  
During the warranty period, SANYO Canada Inc. will repair, or  
at our option, replace an Audio/Video product which shows  
evidence of a manufacturing defect in materials or workmanship.  
Replacement PARTS are warranted for the remaining portion  
of the warranty period.  
WHAT IS NOT COVERED  
STATUTORY WARRANTIES  
(a) Products purchased outside Canada.  
(b) Products purchased in a used condition.  
(c) Problems due to product set-up and installation.  
(d) Adjustments that are outlined in the Operating Manual.  
(e) Accessory items including antenna, batteries, cassette tapes,  
cables, etc.  
The above provisions do not preclude the operation of any  
applicable provincial statute which in certain circumstances  
may not allow some of the limitations and exclusions described  
in this Warranty. Where any terms of this Warranty are prohibited  
by such a statute, they shall be deemed null and void but the  
remainder of this warranty shall remain in effect.  
(f) Damage in or due to transportation.  
(g) Damage due to improper maintenance, improper wiring,  
accident, abuse, misuse or negligence.  
(h) Damage caused by lightning and power surges.  
HOW TO OBTAIN WARRANTY SERVICE  
Please contact the Sanyo Authorized Dealer from whom the  
product was purchased, or contact us directly at:  
ORIGINAL RETAIL PURCHASERS RESPONSIBILITY  
You, the original retail purchaser, must present your original,  
dated bill-of-sale together with this warranty to SANYO Canada  
Inc. or to an authorized Sanyo Service Depot when you make a  
claim under this Warranty.  
SANYO Canada Inc.  
1-300 Applewood Cres.  
Concord, Ont. L4K 5C7  
(905) 760-9944  
1-800-263-2244  
You, the original retail purchaser, are responsible for any costs  
of TRANSPORTING the product to and from SANYO Canada  
Inc. or an authorized Sanyo Service Depot. You also are  
responsible for the cost of any MAINTENANCE necessary in  
respect of the product.  
(R12)  
Download from Www.Somanuals.-cEom3.4A-ll Manuals Search And Download.  
SANYO Canada Inc.  
Printed in China  
Download from Www.Somanuals.-cEom3.5A-ll Manuals Search And Download.  

Radica Games Games N7317 User Guide
Radio Shack Digital Photo Keychain 16 1033 User Guide
RCA Clock RP5435 User Guide
Rio Audio CD Player Advanced Digital Audio Center User Guide
Roland Electronic Keyboard JUNO Di User Guide
Runco Projector VX 4c 1024P User Guide
Samsung Camcorder D365WI User Guide
Samsung Projection Television ST 42W5P User Guide
Screenlife Video Games Disney Bingo User Guide
Senco Staple Gun SNS45 User Guide