Sanyo Camcorder DSR C100 User Guide

INSTRUCTION MANUAL

MANUEL D’INSTRUCTIONS

MANUAL DE INSTRUCCIONES

DSR-C100

Digital Recording Camera

Caméra d’enregistrement numérique

Cámara de grabación digital

About this manual

Acerca de este manual

Antes de instalar y usar este aparato, lea

detenidamente este manual. Asegúrese de

guardarlo a mano para futuras referencias.

Before installing and using this unit, please

read this manual carefully. Be sure to keep it

handy for later reference.

À propos de ce manuel

Avant d’installer et d’utiliser cet appareil,

veuillez lire ce manuel attentivement.

Assurez-vous de le garder à portée de la main

pour référence ultérieure.

Download from Www.Somanuals.com. All Manuals Search And Download.

Deleting all images of an ARCHIVE

SHOT...................................................... 78

ARCHIVE Playback ............................. 57

EXTENSION Playback......................... 59

Deleting all images in the

EXTENSION recording area.................. 79

FUNCTION OPERATIONS ...................... 61

Deleting all images of an EXTENSION

Function operations for ALARM

SHOT...................................................... 80

recording images.................................. 61

Function operations for SUSPICION

recording images.................................. 62

OPERATIONS USING A COMPUTER......81

REPLACING THE HARD DISK DRIVE .....82

Function operations for ARCHIVE

recording images.................................. 63

SPECIFICATIONS.....................................83

Camera unit .......................................... 83

Dimensions ........................................... 84

Ni-Cd Battery......................................... 85

AC Adaptor........................................... 85

Function operations for EXTENSION

recording images.................................. 64

Image enlargement (ZOOM) ............ 65

Enlarging images to any one of six

sizes....................................................... 65

Changing the image enlargement

position ................................................. 66

Setting date/time/information (ON

SCREEN DISPLAY) .............................. 67

Image copying (COPY) ...................... 68

Saving images recorded at times

such as during an emergency

situation to the archive recording

area of the hard disk............................ 68

Saving images recorded at times

such as during an emergency

situation onto a memory card............. 70

Formatting the memory card .............. 72

Deleting Images (DELETE)................. 73

Deleting all images in the ALARM

recording area ...................................... 73

Deleting all images in the

PRE-ALARM (PRE1) recording area...... 74

Deleting all images in the SUSPICION

recording area ...................................... 75

Deleting all images of a SUSPICION

group..................................................... 76

Deleting all images in the ARCHIVE

recording area ...................................... 77

English

Download from Www.Somanuals.com. All Manuals Search And Download.

INFORMATION TO USER

Safety Guard

This equipment has been tested and found to

comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules.

THIS SYMBOL INDICATES THAT

THERE ARE IMPORTANT OPERATING

AND MAINTENANCE INSTRUCTIONS

IN THE LITERATURE ACCOMPANYING

THIS UNIT.

These limits are designed to provide reasonable

protection against harmful interference in a

residential installation. This equipment

generates, uses, and can radiate radio

frequency energy and, if not installed and used

in accordance with the instructions, may cause

harmful interference to radio communications.

WARNING:

TO PREVENT THE RISK OF FIRE OR ELECTRIC

SHOCK , DO NOT EXPOSE THIS APPLIANCE

TO RAIN OR MOISTURE.

However, there is no guarantee that

interference will not occur in a particular

installation. If this equipment does cause

harmful interference to radio or television

reception, which can be determined by turning

the equipment off and on, the user is

encouraged to try to correct the interference by

one or more of the following measures:

For the customers in Canada

– Reorient or relocate the receiving antenna.

This Class B digital apparatus complies with

Canadian ICES-003.

– Increase the separation between the

equipment and receiver.

– Connect the equipment into an outlet on a

circuit different from that to which the

receiver is connected.

Pour la clientèle canadienne

Cet appareil numerique de la Classe B est

conforme a la norme NMB-003 du Canada.

– Consult the dealer or an experienced radio/TV

technician for help.

This device complies with Part 15 of the FCC

Rules. Operation is subject to the following two

conditions: (1) This device may not cause

harmful interference, and (2) this device must

accept any interference received, including

interference that may cause undesired

operation.

This installation should be made by a qualified service

person and should conform to all local codes.

Declaration of Conformity

Model Number

Trade Name

: DSR-C100

: SANYO

Changes or modifications not expressly

approved by Sanyo may void the user’s

authority to operate this camera.

Responsible party : SANYO FISHER COMPANY

Address

: 21605 Plummer Street,

Chatsworth, California 91311

: (818) 998-7322

Telephone No.

This device complies with Part 15 of the FCC

Rules. Operation is subject to the following

two conditions:

•

(1) this device may not cause harmful

interference, and

(2) this device must accept any interference

received, including interference that may

cause undesired operation.

English

Download from Www.Somanuals.com. All Manuals Search And Download.

PRECAUTIONS

In case of problems

Cleaning

Do not use the camera if smoke or a strange odor

comes from the unit, or if it seems not to function

correctly. Disconnect the power cord immediately,

and consult your dealer (or a Sanyo Authorized

Service Centre).

Dirt can be removed from the cabinet by wiping

it with a soft cloth. To remove stains, wipe with

a soft cloth moistened with a neutral detergent

solution and wrung dry, then wipe dry with a

dry soft cloth.

•

Do not use solvents, thinner or other chemical

product on the cabinet, as that may cause

deformation and paint peeling. Before using a

chemical cloth, make sure to read all

accompanying instructions. Make sure that no

plastic or rubber material comes in contact with

the cabinet for a long period of time, as that

may cause damage or paint peeling.

Do not open or modify

Do not open the cabinet, as it may be dangerous

and cause damage to the unit. For internal settings

and repairs, consult your dealer (or a Sanyo

Authorized Service Centre).

Do not put objects inside the unit

Make sure that no metal objects or flammable

substance get inside the camera. If used with a

foreign object inside, it could cause a fire,

short-circuits or damages.

IMPORTANT NOTE:

The EPA certified RBRC^®

If water or other liquid gets inside the camera,

disconnect the power cord immediately, and

consult your dealer (or a Sanyo Authorized Service

Centre). Be careful to protect the camera from rain,

seawater, etc.

Battery Recycling Seal on the

nickel-cadmium (Ni-Cd) battery

indicates SANYO is voluntarily

participating in an industry

program to collect and recycle

these batteries at the end of

their useful life, when taken

out of service in the United

States or Canada. The RBRC

program provides a convenient

alternative to placing used

Ni-Cd batteries into the trash

or the municipal waste stream,

which may be illegal in your

area. Please call

Be careful when handling the unit

To prevent damage, do not drop the camera or

subject it to strong shock or vibration.

Install away from electric or magnetic fields

If installed close to a TV, radio transmitter, magnet,

electric motor, transformer, or audio speakers, the

magnetic field they generate may distort the image.

Protect from humidity and dust

To prevent damage to the camera, do not install it

where there is greasy smoke or steam, where the

dampness may get too high, or where there is a lot

of dust.

1-800-822-8837 for

information on Ni-Cd battery

recycling and disposal

bans/restrictions in your area.

SANYO’s involvement in this

program is part of our

commitment to preserving our

environment and conserving

our natural resources.

Protect from high temperatures

Do not install close to stoves or other heat

generating devices, such as spotlights, or where the

camera could be subject to direct sunlight, as that

could cause deformation, discoloration or other

damage.

Be careful when installing close to the ceiling in a

kitchen or boiler room, as the temperature may rise

to high levels.

Install where the temperature range will stay

between 5˚C and 40˚C. (no condensation)

English

Download from Www.Somanuals.com. All Manuals Search And Download.

FEATURES

ACCESSORIES

Equipped with a 3.5-inch hard disk

1 AC adaptor

The images are recorded directly to the camera’s

hard disk. The saved images can then be

manipulated using a CompactFlash card and a

personal computer.

2 Relay connector

3 Ni-Cd battery (for backup)

4 Application software (CD-ROM)

a Power cord

The following four recording modes are

available.

Pre-alarm recording

•

This is normal recording. The images are saved

in the pre-alarm area of the hard disk.

Post-alarm recording

•

When a hold-up switch which is connected to

the H (HOLD-UP) terminal at the rear of the

camera is operated, post-alarm recording starts,

and the recorded images are saved in the

post-alarm area of the hard disk.

Backup recording

•

If there is 20 minutes or more of available

recording time remaining in the alarm recording

area of the hard disk when the first post-alarm

recording session ends, backup recording then

starts.

Suspicion recording

•

When a suspicion switch which is connected to

the S (SUSPICION) terminal at the rear of the

camera is operated, images such as those of

suspicious individuals are saved in the suspicion

area of the hard disk.

Multi-playback function

The captured images in hard disk can then be

played back in an instant. Special playback

functions such as multi-screen display, reverse

playback, frame jogging and zooming are all

possible. In addition, images can easily be copied

(saved) as required.

RS-232C connector/USB connector equipped

as standard

A computer can be connected to allow image data

to be transmitted at high speeds.

English

Download from Www.Somanuals.com. All Manuals Search And Download.

PART NAMES AND FUNCTIONS

Front panel

NTSC

SET

PAL

2 3

1 Operation panel cover

2 Operation panel

Remove this cover in order to use the MENU

button and CURSOR button to operate the

camera.

1 MENU button

This button is used to display menu screens.

2 CURSOR button

Removing the operation panel cover

•

This button is used to select items in the

menu screens and to change settings.

Use a screwdriver to loosen the fixing

screws, and then slide the operation panel

cover to the left to remove it.

In addition, it is used to select images to be

played back and to select playback functions.

3 SET button

This button is used to accept items selected

in the menu screens and setting values.

4 Extension port

This port is used to copy images to

removable media such as a CompactFlash

card.

Note: Be careful not to drop the operation panel

cover when removing it.

5 EJECT button (See page 70)

6 NTSC/PAL select switch

This switch is used to select the video format.

NTSC: NTSC format

PAL: PAL format

Note: This switch must be set before the power is

turned on. If it is set after the power is

turned on, the setting will be ignored.

English

Download from Www.Somanuals.com. All Manuals Search And Download.

PART NAMES AND FUNCTIONS

Front Panel

Rear Panel

3 Camera mounting bracket

1 Control terminals

The camera mounting bracket is provided with

These terminals are used to connect extra items

such as hold-up and suspicion switches, a

warning indicator or a 13.8 V DC power supply.

mounting holes (1/4” – 20 UNC). At the time of

shipment from the factory, the bracket is attached

to the top of the camera, but it can also be

attached to the bottom of the camera. Use

whichever attachment position is suitable for the

place and method of use.

2 RS-232C connector (RS-232C)

This connector is used to connect the camera to

a computer in order to transfer images from the

camera to the computer.

3 USB connector (USB)

This connector is used to connect a computer in

order to transfer images from the camera to the

computer.

If the RS-232C connector and USB connector

are both connected at the same time, the USB

connector has priority for image data transfer.

Note: If installing the camera to a ceiling, always be

sure to check the strength of the installation

location (it must be able to bear a weight of at

least 10 kg). It is recommended that you use

the model VA-WH-1 mounting bracket (sold

separately) to install the camera. Contact the

place where you purchased the camera for

further details.

4 Rear cover fixing screw

This screw is used when replacing the hard disk

or the Ni-Cd backup battery.

Note: Never open the rear cover while power is

being supplied to the camera. Always be

sure to set the hard disk to standby mode

before opening the rear cover. (See page 11)

4 Caution indicator (See page 9)

Flashes or lights to indicate the operating status of

the camera.

5 Lens

6 Cooling fan

A cooling fan is provided in order to prevent the

inside of the camera from overheating.

If the cooling fan stops, stop the camera and check

the cause of the problem.

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Control terminals

DC13.8V

GND^WARNINGGND

GND

1 2 3 4 5 6 7

5 VIDEO OUT terminal (BNC plug)

7 Warning indicator

This terminal is used to connect the camera to a

component such as a monitor or camera control

unit.

The warning indicator lights when the

camera power is turned on.

•

It flashes when there is a hard disk error or if

there is a problem with the backup battery.

•

6 RESET button

Press the RESET button if an abnormality occurs

with the camera. Settings are not changed

when the camera is reset in this way.

Terminal

Signal

Input/output voltage

1 H (HOLD-UP)

Alarm switch input signal

2.5 V or higher when alarm switch off/

0.4 V or lower when alarm switch on

2 GND

Alarm switch and suspicion switch ground 0 V

3 S (SUSPICION) Suspicion switch input signal

2.5 V or higher when suspicion switch off/

0.4 V or lower when suspicion switch on

4 GND

Warning ground

0 V

5 WARNING

6 GND

Warning signal output

Power supply ground

Power supply input

3.3 V or higher when warning generated

0 V

7 DC 13.8 V

13.8 V DC

English

Download from Www.Somanuals.com. All Manuals Search And Download.

WARNING DISPLAYS

There is a caution indicator and a warning indicator on the front and back of the camera. These indicators

operate to notify you of the operating status of the camera and of any cautions and warnings. In addition,

text messages indicating warnings are also displayed on the monitor screen in conjunction with the flashing

speed of the indicators.

A separate indicator can be connected to the WARNING terminal to let you check the same warning statuses

as shown by the built-in warning indicator.

If the warning indicator continues flashing, it indicates that there is a problem with the camera.

If this happens, maintain the camera in the same status and contact the place of purchase.

Indicator

Monitor display

Camera status

Hard disk at standby

Caution Caution

(ON) (OFF)

Off Off

Warning

Off

When MAIN MENU screen displayed

When SETTINGS screen displayed

During playback

Lights

Off

During pre-alarm or post-alarm

recording

Fast

During suspicion recording

flashes

1 When post-alarm recording is

complete and pre-alarm 2

recording has started (suspicion

recording possible)

PRE2 ALARM-REC

Slow

flashes

Lights

Off

2 When the cooling fan has stopped

(alarm/suspicion recording possible)

FUN WARN

3 When suspicion recording is

complete (alarm recording possible)

When computer connected

Slow

flashes

Slow

flashes

When computer connected

(during data transmission) (ö)

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Warning indicator

Caution indicator

Indicator

Monitor display

Camera status

Caution Caution

(ON) (OFF)

Warning

4 When there is 20 minutes or less of

recording time remaining in the

post-alarm recording area, or

When post-alarm 2 recording is

complete (suspicion recording

possible)

HDD WARN

5 When there is a problem with the

camera hardware (recording is not

possible)

SYSTEM

ERROR

Fast

flashes

Fast

flashes

Off

6 When there is a problem with the

hard disk (recording is not possible)

LOW BATT

7 When Ni-Cd battery is not installed

or not connected (NO BATT)

When there is a problem with the

Ni-Cd battery (LOW BATT)

NO BATT

When time setting has not been

carried out

During hard disk initialization (ö)

During memory card initialization

Note: If you do not need the caution indicator to operate (lighting or flashing), you can set it to remain off

at all times by setting CAUTION LED to “OFF” in the SYSTEM SET screen.

However, the ö mark indicates times when the caution indicator flashes regardless of the CAUTION

LED setting.

_{Download from Www.Somanuals.co}1_m0_{. All Manuals Search And Download.}

English

INSTALLING AND HANDLING

THE Ni-Cd BACKUP BATTERY

The Ni-Cd battery which is supplied with the camera is used as a backup power supply for the clock and the

hard disk.

The battery has not been charged. Before turning on the camera power, install the battery by referring to the

points below. If any problems with battery operation or leakages of battery fluid occur, contact the place of

purchase.

Note:

(Warning displays)

Once the camera’s power has been turned on

When the camera power is turned on after the

•

and left on for 24 hours, the battery will be

charged sufficiently to provide 30 days of

backup operation.

battery has been replaced, “LOW BATT” will

appear on the monitor screen, and charging of

the battery will start automatically.

If the battery is used continuously for long

periods, leakage of battery fluid may occur. The

interior of the battery compartment is lined with

absorbent material to absorb any fluid which

should happen to leak from the battery, so if

replacing the battery after a leak has occurred,

be sure to replace this absorbent material also.

Approximately 1 hour of charging time is

•

needed before the “LOW BATT” display

disappears from the monitor screen. If the

“LOW BATT” display does not disappear after

one hour or more has passed, it may indicate a

problem with the battery.

If “LOW BATT” appears on the monitor screen

while the camera is in use, the warning

indicator will flash and recording of images will

be halted. This may also indicate a problem with

the battery, so replace the battery at such times.

•

Always be sure to use the accessory AC

adapter. If you use some other

commercially-available AC adapter, detection of

problems with the backup battery will not be

possible, and damage to the hard disk may

result.

•

If the battery has not been installed, or if the

•

battery terminal contacts are not complete,

“NO BATT” will appear on the monitor display.

If this happens, check the battery once more.

If the camera power supply is turned off or a

power outage occurs after the battery has only

been charging for a short time, it may cause the

clock setting to be re-initialized. If this happens,

the camera will not operate.

•

Never open the rear cover while power is being

supplied to the camera. Always be sure to set

the hard disk to the standby condition before

opening the rear cover. (See page 18)

English

_{Download from Www.Somanuals.co}1_m1_{. All Manuals Search And Download.}

Installing the Ni-Cd battery

1 Loosen the rear cover fixing screw (A) and open

the cover. (The screw cannot be removed from

the cover.)

3 Connect the battery plug to the connector.

4 Close the rear cover and tighten the rear cover

fixing screw (A).

2 Insert the battery into the battery compartment

so that the Ni-Cd battery label is facing upward.

WARNING

DANGER

The following precautions must be observed at all

times, otherwise the battery may leak, overheat or

explode.

Do not short the battery terminals and do not

•

attempt to disassemble or modify the battery.

Do not drop the battery or subject it to strong

•

shocks.

Never peel off or scratch the outer tube.

•

Do not place the battery into fire, as it may

explode.

Do not use in any other appliance except for

this camera.

•

Do not expose the battery to moisture.

Do not carry the battery by holding the

connectors or lead wires.

•

Do not place the battery into water or let the

terminals of the battery get wet.

If the fluid inside the battery gets into eyes, it may

cause blindness. Do not rub the eyes, wash the

affected area immediately with clean water, and

then seek medical advice.

If the fluid inside the battery gets onto the skin or

clothing, it may injure the skin, so wash the

affected area immediately with clean water.

_{Download from Www.Somanuals.co}1_m2_{. All Manuals Search And Download.}

English

CONNECTIONS

Carefully read the documentation which is provided with each of the components being connected.

Be careful to connect components correctly, as incorrect connections could cause fire or other damage.

Basic connections

(connect a lamp or similar device)

(A) Hold-up switch

(B) Suspicion switch

13.8 V DC

Coaxial cable

To VIDEO IN

TV monitor

(sold separately)

Connect all required devices to the control

terminals before turning on the power.

Connecting the power supply

1 Connect a commercially-available cable to the

relay connector (supplied), and then connect

the cable to the power supply connector (13.8

V/GND) of the camera.

(A) Connect a commercially-available hold-up

switch (H/GND).

(B) Connect a commercially-available suspicion

switch (S/GND).

2 Insert the plug of the AC adaptor (supplied) into

the relay connector terminal.

lamp to the warning signal output terminal.

3 Insert one end of the power cord (supplied) into

the AC adaptor, and insert the other end into a

wall outlet.

This will light or flash in the same way as the

warning indicator on the rear of the camera

for checking purposes.

Note:

The cable that is connected to the relay

•

connector can be up to a maximum of 30

meters in length, but it should not be bound up

with any other cables.

Use UL NISPT-2 (2/18AWG, 105˚CM, VW-1)

cables which are listed in UL as the connection

cables.

•

English

_{Download from Www.Somanuals.co}1_m3_{. All Manuals Search And Download.}

Connection to a computer

If the camera is connected to a computer, you can then use the accessory application software to perform

operations such as data transfer and printing of images by the computer.

The method of connecting the power supply and peripheral devices is the same as described in “Basic

connections”.

(connect a lamp or similar device)

(A) Hold-up switch

(B) Suspicion switch

13.8 V DC

•RS-232C cable connection

•USB cable connection

Computer

Note:

When connecting an RS-232C cable, it may be necessary to use a separate conversion adaptor depending

on the type of computer being used.

•

When connecting a USB cable, take note of the differences in the shapes of the connectors at the

computer end and at the camera end.

Only connect a cable to the USB connector when using the application software. If the USB cable is

connected to the camera at other times, normal operations such as recording cannot be carried out.

_{Download from Www.Somanuals.co}1_m4_{. All Manuals Search And Download.}

English

HARD DISK

Hard disk recording areas

The camera records the images being viewed onto the hard disk.

The hard disk is divided into six areas (1 ~ 4). The folder and file structure on the hard disk is as shown

below.

PRE1 ALM

SUSPECT

ARCHIVE

ON SCREENN DISPLAY

COPY

EXTENSION

DELETE

2001/08/02 13:42:35 1/3

[MENU] (MAIN MENU)

View details of the time and the hard disk recording capacity. (See page 37)

CONDITION

TIME: 08/02/2002 15:15:20

PRE: 15MIN

SUSPICION:

POST: 30MIN

150/ 6834PCS

FRAMERATE: 3FPS ST/DL:OFF

FILE ID: A

COMMENT:

ID:

[MENU] (MAIN MENU)

English

_{Download from Www.Somanuals.co}1_m7_{. All Manuals Search And Download.}

HARD DISK STANDBY MODE

When shooting or recording ends, switch the hard disk to standby mode.

Setting to standby mode

Canceling standby mode

If you press the MENU button, the MAIN MENU

screen will be displayed.

Press the MENU button.

To start pre-alarm recording, select RECORD START

and then press the SET button. Furthermore, if the

MAIN MENU screen remains displayed for 30

seconds, the camera will change automatically to

pre-alarm recording.

The MAIN MENU screen will be displayed.

(MAIN MENU)

RECORD START

PLAYBACK

SETTINGS

CONDITION

Press the MENU button.

Pre-alarm recording will then start.

PRE1-ALLARM REC

While pressing the MENU button, press

the SET button.

After the current image has been recorded on

the hard disk, the disk will change to standby

mode. During recording, the message “DISK

CLOSING” will be displayed for approximately

2 seconds.

REMAIN SHOTS: 6834

Note: The warning indicator and caution indicator

will both flash while the hard disk contents

are being checked. When pre-alarm

recording starts, the caution indicator will

light.

Furthermore, the warning indicator and

caution indicator will both switch off while the

hard disk is in standby mode.

SET

DISK CLOSING

Note:

The caution indicator will flash until the hard

disk changes to standby mode. None of the

setting details will change when the hard disk is

in standby mode.

•

This operation (DISK CLOSING) cannot be

carried out using the camera control unit (sold

separately).

•

_{Download from Www.Somanuals.co}1_m8_{. All Manuals Search And Download.}

English

MEMO.....................................................

................................................................

English

_{Download from Www.Somanuals.co}1_m9_{. All Manuals Search And Download.}

MENU SETTINGS

Download from Www.Somanuals.com. All Manuals Search And Download.

MENU SETTINGS

Menu screen display

b Clock settings

b System settings

(CLOCK SET)

(SYSTEM SET)

YEAR------------------2001

MONTH----------------- 01

DAY------------------- 01

HOUR------------------ 13

MINUTE---------------- 59

SECOND---------------- 59

FORM------------MM/DD/YYYY

CLOCK START----------- YES

BLC CONTROL ------- OFF

CAUTION LED ------- ON

SUSPICION FRAMERATE 3 FPS

SUSPICION LOOP ---- OFF

FLICKER LESS ------ OFF

[MENU] (SETTINGS)

b Hard disk area capacity setting

(HDD SET)

(SPACE SET)

(SPACE SET)

MAIN MENU screen

<ALARM TIME

<PRE ALARM

<POST ALARM

45MIN>

15MIN>

30MIN>

<ALARM TIME

45MIN>

<ALARM TIME

45MIN>

(MAIN MENU)

PRE ALARM

POST ALARM

SETUP

15 MIN

30 MIN

YES

PRE ALARM

POST ALARM

SETUP

15 MIN

30 MIN

YES

RECORD START

PLAYBACK

SETTINGS

SPACE SET

CONDITION

INITIALIZE

DO NOT POWER OFF!

[MENU] (MAIN MENU)

SETTING NOW!

SET

(INITIALIZE)

PASSWORD:

(HDD INITIALIZE)

(HDD INITIALIZE)

<ALARM TIME

45MIN>

<ALARM TIME

45MIN>

PRE ALARM

POST ALARM

INITIALIZE

15 MIN

30 MIN

YES

PRE ALARM

POST ALARM

INITIALIZE

DO NOT POWER OFF!

INITIALIZING NOW!

15 MIN

30 MIN

YES

ABCDEFGHIJKLM

NOPQRSTUVWXYZ

0123456789

BS END

SETTINGS screen

(SETTINGS)

CLOCK SET

SYSTEM SET

HDD SET

SUMMER TIME/DAYLIGHT SET

KEYWORD SET

b Summer time/daylight settings

(SUMMER TIME/DAYLIGHT SET)

[MENU] (MAIN MENU)

MODE ----------------- OFF

(START) (END)

MODE ----------------- ON

(START) (END) START

MODE ----------------

(START) (END)

END

LAST

SUN

SET

WEEK

1ST LAST

WEEK

1ST LAST

1ST

SUN

WEEK

1ST LAST

SUN

MONTH

HOUR

MONTH

HOUR

MONTH

HOUR

MINUTE

b Keyword settings

(KEY WORD SET)

FILE ID :A

(KEY WORD SET)

FILE ID

(KEY WORD SET)

CAMERA ID:

(KEY WORD SET)

COMMENT

CAMERA ID:

COMMENT

CHANGE PASSWORD (DELETE)

CHANGE PASSWORD (INITIAL)

ABCDEFGHIJKLM

NOPQRSTUVWXYZ

0123456789

BS END

ABCDEFGHIJKLM

NOPQRSTUVWXYZ

0123456789.,

ABCDEFGHIJKLM

NOPQRSTUVWXYZ

0123456789.,

/-$&#’”()

END

/-$&#'”()

END

(CHANGE PASSWORD-DELETE)

OLD PASSWORD:

(CHANGE PASSWORD-INITIALIZE)

OLD PASSWORD:

NEW PASSWORD:

VERIFICATION:

ABCDEFGHIJKLM

NOPQRSTUVWXYZ

0123456789

BS END

ABCDEFGHIJKLM

NOPQRSTUVWXYZ

0123456789

BS END

English

_{Download from Www.Somanuals.co}2_m1_{. All Manuals Search And Download.}

SETTING THE CLOCK (CLOCK SET)

You need to set the date and time in order to use the camera. The recording functions of this camera cannot

be used if the date and time have not been set. In addition, if the accessory Ni-Cd battery (for backup) which

is used for running the clock and for hard disk backups has been replaced, you must reset the clock.

The setting time is displayed when “CONDITION” is selected from the MAIN MENU screen.

•

CONDITION

TIME: 08/02/2002 15:34:26

Use the CURSOR (l) button to select

“DAY ... 01” and then use the CURSOR (d

or c) button to set the day to “02”.

PRE: 15MIN

SUSPICION:

POST: 30MIN

150/ 6834PCS

FRAMERATE: 3FPS ST/DL: ON

FILE ID: A

COMMENT:

ID:

Use the CURSOR (l) button to select

“HOUR ... 00” and then use the CURSOR

(d or c) button to set the hour to “15”.

[MENU] (MAIN MENU)

Note: The clock is set when the camera is first

used, but if summer time has been set, the

time will advance by one hour automatically

during the summer time application period,

so you may need to reset the clock.

Use the CURSOR (l) button to select

“MINUTE ... 00” and then use the CURSOR

(d or c) button to set the minutes to

“15”.

Setting example: To set the clock to 15:15:20

on 2 August 2002

Use the CURSOR (l) button to select

“SECOND ... 00” and then use the CURSOR

(d or c) button to set the seconds to

“20”.

Press the MENU button to return to the SETTING

screen.

Use the CURSOR (l) button to select

“FORM ... MM/DD/YYYY” and then use

the CURSOR (d or c) button to set the

desired format.

“SETTINGS” and then press the SET button.

The SETTINGS screen will be displayed.

Use the CURSOR (l) button to select

“CLOCK SET” and then press the SET

button.

YYYY/MM/DD: Year/Month/Day

•

MM/DD/YYYY: Month/Day/Year

•

DD/MM/YYYY: Day/Month/Year

•

The CLOCK SET screen will be displayed.

(CLOCK SET)

Use the CURSOR (l) button to select

“CLOCK START ... YES” and then press the

SET button.

YEAR------------------2001

MONTH----------------- 01

DAY------------------- 01

HOUR------------------ 00

MINUTE---------------- 00

SECOND---------------- 00

FORM----------- MM/DD/YYYY

CLOCK START----------- YES

YEAR------------------2002

MONTH----------------- 08

DAY------------------- 02

HOUR------------------ 15

MINUTE---------------- 15

SECOND---------------- 20

FORM----------- MM/DD/YYYY

CLOCK START----------- YES

The CLOCK START screen will be displayed,

and the date and time which have been set

will appear on the screen. The camera will

return to recording mode after approximately

30 seconds.

(Before setting)

(After setting)

If you select “NO”, the clock setting will not

be changed, and the screen will return to the

SETTINGS screen.

Use the CURSOR (l) button to select

“YEAR ... 2001” and then use the CURSOR

(d or c) button to set the year to “2002”.

(CLOCK START)

Use the CURSOR (l) button to select

“MONTH ... 01” and then use the CURSOR

(d or c) button to set the month to “08”.

2002/08/02 15:15:20

_{Download from Www.Somanuals.co}2_m2_{. All Manuals Search And Download.}

English

SYSTEM SETTINGS (SYSTEM SET)

Several different system settings can be made as indicated below. When these settings are made, the screen

display appears as shown in the accompanying illustrations.

1 Setting the backlight compensation

Use the CURSOR (l) button to select “BLC

CONTROL ... OFF” and then use the

2 Setting the front caution indicator to stay off

during recording

CURSOR (d or c) button to select “ON”.

3 Changing the frame rate for suspicion recording

ON: Backlight compensation is carried out.

OFF: Backlight compensation is not carried

4 Setting the overwriting conditions and warning

out.

displays or suspicion recordings

5 Changing the flickerless setting

Use the CURSOR (l) button to select

“CAUTION LED ... ON” and then use the

CURSOR (d or c) button to select “OFF”.

PRE1-ALARM REC

SUSPICION

ON: The caution indicator lights.

OFF: The caution indicator stays switched off.

The screen display will also disappear during

recording.

FUNCTION

2001/02/14 15:25:50 1/1

REMAIN SHOTS:10000

Use the CURSOR (l) button to select

“SUSPICION FRAMERATE ... 3” and then

use the CURSOR (d or c) button to select

“1”.

SUSPICION

1 FPS: Images are recorded at the rate of 1

per second.

FUNCTION

3 FPS: Images are recorded at the rate of 3

REMAIN SHOTS:LOOP

per second.

Press the MENU button to return to the SETTING

screen.

Use the CURSOR (l) button to select

“SUSPICION LOOP ... OFF” and then use

the CURSOR (d or c) button to select

“ON”.

Use the CURSOR (l) button to select

“SETTINGS” and then press the SET button.

ON: Old images are deleted and overwritten.

The SETTINGS screen will be displayed.

OFF: A warning is given and old images are

not overwritten. (See page 47)

Use the CURSOR (l) button to select

“SYSTEM SET” and then press the SET

button.

Use the CURSOR (l) button to select

“FLICKER LESS ... OFF” and then use the

CURSOR (d or c) button to select “ON”.

The SYSTEM SET screen will be displayed.

The various items can be selected by

pressing the SET button.

•

ON: Image flickering is reduced.

OFF: Image flickering is not reduced.

(SYSTEM SET)

BLC CONTROL ------- OFF

CAUTION LED ------- ON

SUSPICION FRAMERATE 3 FPS

SUSPICION LOOP ---- OFF

FLICKER LES ------- OFF

BLC CONTROL ------- ON

CAUTION LED ------- OFF

SUSPICION FRAMERATE 1 FPS

SUSPICION LOOP ---- ON

FLICKER LES ------- ON

When all settings have been completed,

press the MENU button to return to the

SETTINGS screen.

[MENU] (SETTINGS)

(Before setting)

(After setting)

English

_{Download from Www.Somanuals.co}2_m3_{. All Manuals Search And Download.}

HARD DISK CAPACITY SETTINGS (HDD SET)

Hard disk initialization settings are shown in Figure 1. This section explains how to change the hard disk

recording capacity and how to initialize the hard disk.

Hard disk initialization

Use the CURSOR button and the SET

button to select the password characters

from the character palette.

If the hard disk is initialized, all data which has been

recorded on the hard disk up to that point will be

erased. When initializing the hard disk, always be

sure to transfer any recorded image data to a

computer before doing the initialization.

“ö” characters will appear in the password

entry box.

(INITIALIZE)

Hard disk initialization requires a password to be

entered before the initialization is carried out, in

order to protect the image data. See page 32 for

details on setting the password.

PASSWORD

ABCDEFGHIJKLM

NOPQRSTUVWXYZ

0123456789

BS END

Charactor

palette

Press the MENU button to return to the SETTING

screen.

Use the CURSOR (j or l) button to select

“SETTINGS” and then press the SET

button.

Use the CURSOR (j or l) button to select

“END” and then press the SET button.

The HDD INITIALIZE screen will be displayed.

The SETTINGS screen will be displayed.

Use the CURSOR button to set the capacity

of the alarm recording area.

Use the CURSOR (j or l) button to select

“HDD SET” and then press the SET button.

Example:

The HDD SET screen will be displayed.

1 Set the PRE ALARM item to 45 minutes.

2 Set the POST ALARM item to 20 minutes.

Use the CURSOR (j or l) button to select

“INITIALIZE” and then press the SET

button.

The “SUSPICION SHOTS” and “ALARM

TIME” settings will be made automatically.

The INITIALIZE screen will be displayed, and

you will be prompted to enter the password.

Use the CURSOR (j or l) button to select

“INITIALIZE” and then use the CURSOR (d

or c) button to select “YES” and then

press the SET button.

(HDD SET)

<ALARM TIME

<PRE ALARM

<POST ALARM

45MIN>

15MIN>

30MIN>

The hard disk will be initialized, and the display

will then return to the SETTINGS screen.

SPACE SET

INITIALIZE

[MENU] (SETTINGS)

If you select “NO”, the display will return to

the HDD SET screen.

(Fig. 1)

(HDD INITIALIZE)

(HDD INITIALIZE)

<ALARM TIME

45MIN>

<ALARM TIME

65MIN>

PRE ALARM

POST ALARM

INITIALIZE

15 MIN

30 MIN

YES

PRE ALARM

POST ALARM

INITIALIZE

45 MIN

20 MIN

YES

DO NOT POWER OFF!

INITIALIZING NOW!

_{Download from Www.Somanuals.co}2_m4_{. All Manuals Search And Download.}

English

HARD DISK CAPACITY SETTINGS (HDD SET)

Changing the alarm capacity

Use the CURSOR (j or l) button to

After the hard disk has been initialized and when

no post-alarm images have yet been recorded in

the pre-alarm recording area of the hard disk,

“SPACE SET” will be displayed on the screen.

select “SETUP” and then use the CURSOR

(d or c) button to select “YES” and then

press the SET button.

The capacity of the alarm recording area will

be changed, and the SPACE SET screen will be

displayed.

If “SPACE SET” is displayed on the screen, you can

then change the alarm capacity. If images have

been recorded in the post-alarm recording area,

then the alarm capacity cannot be changed. Delete

the alarm images or initialize the hard disk before

changing the alarm recording area capacity.

If you select “NO”, the display will return to

the HDD SET screen.

(SPACE SET)

(SPACE SET)

<ALARM TIME

70MIN>

<ALARM TIME

70MIN>

Use the CURSOR (j or l) button to

select “SETTINGS” and then press the SET

button.

PRE ALARM

POST ALARM

SETUP

30 MIN

40 MIN

YES

PRE ALARM

POST ALARM

SETUP

30 MIN

40 MIN

YES

DO NOT POWER OFF!

SETTING NOW!

The SETTINGS screen will be displayed.

Use the CURSOR (j or l) button to

select “HDD SET” and then press the SET

button.

The HDD SET screen will be displayed.

Use the CURSOR (j or l) button to

select “SPACE SET” and then press the SET

button.

The SPACE SET screen will be displayed.

Use the CURSOR button to reset the

capacity of the alarm recording area.

Example:

1 Set the PRE ALARM item to 30 minutes.

2 Set the POST ALARM item to 40 minutes.

The “SUSPICION SHOTS” and “ALARM

TIME” settings will be made automatically.

Note: If some images have already been recorded

in the suspicion recording area, the setting

time for the alarm recording capacity will

change.

(HDD SET)

(SPACE SET)

<ALARM TIME

<PRE ALARM

<POST ALARM

45MIN>

15MIN>

30MIN>

<ALARM TIME

70MIN>

PRE ALARM

POST ALARM

SETUP

30 MIN

40 MIN

SPACE SET

INITIALIZE

[MENU] (SETTINGS)

English

_{Download from Www.Somanuals.co}2_m5_{. All Manuals Search And Download.}

SUMMER TIME SETTINGS

(SUMMER TIME/DAYLIGHT SET)

Summer time settings include the time when summer time is to start and when it is to end. When summer

time has been set, the setting time will change automatically between standard time and summer time.

When image that have been recorded while summer time is active are being played back, a “ö” will appear

in front of the time display.

(Start time setting)

Use the CURSOR (l) button to select

“START”.

PAUSE

Use the CURSOR (l) button to select

“WEEK 1ST”, and then use the CURSOR (d

or c) button to select “LAST”.

2001/02/14 15:42:36

Setting example: Start time: 2 p.m. on the last

Sunday in March

Display: 1ST, 2ND, 3RD, 4TH, LAST

End time: 2 p.m. on the 4th

Sunday in October

Use the CURSOR (l) button to select

“WEEK SUN”.

Use the CURSOR (l) button to select

Display: SUN, MON, TUE, WED, THU, FRI, SAT

“SETTINGS” and then press the SET button.

The SETTINGS screen will be displayed.

Use the CURSOR (l) button to select

“MONTH 04” and then use the CURSOR

(d or c) button to set the month to “03”.

Use the CURSOR (j or l) button to select

“SUMMER TIME/DAYLIGHT SET” and then

press the SET button.

Display: 1, 2, 3 ... 12

The SUMMER TIME/DAYLIGHT SET screen will

be displayed.

Use the CURSOR (l) button to select

“HOUR 02” and then use the CURSOR (d

or c) button to set the hour to “14”.

(SUMMER TIME/DAYLIGHT SET)

Display: 00, 01, 02, 03 ... 22, 23

MODE ---------------- OFF

(START) (END)

WEEK

1ST LAST

Use the CURSOR (l) button to select

SUN

MONTH

HOUR

“MINUTE 00”.

Display: 00, 01, 02, 03 ... 58, 59

MINUTE

(SUMMER TIME/DAYLIGHT SET)

MODE ----------------

Use the CURSOR (d or c) button to set

(START) (END) START

“MODE ... ON”.

WEEK

LAST LAST

LAST

SUN

The “START” setting will be displayed.

MONTH

HOUR

(SUMMER TIME/DAYLIGHT SET)

MINUTE

MODE ----------------

(START) (END) START

WEEK

1ST LAST

1ST

SUN

MONTH

HOUR

MINUTE

_{Download from Www.Somanuals.co}2_m6_{. All Manuals Search And Download.}

English

SUMMER TIME SETTINGS

(SUMMER TIME/DAYLIGHT SET)

(End time setting)

☞ Notes on summer time settings

When changing the current time setting using the

CLOCK SET screen, you cannot change it to a time

which is within one hour after the time when

summer time has been set to start. If you try to set

the time in this way, the time displayed will be

changed automatically to a setting which is one

hour after the time that you have actually set.

Use the CURSOR (j or l) button to

select “START”, and then use the CURSOR

(d or c) button to select “END”.

Use the CURSOR (l) button to select

“WEEK LAST”, and then use the CURSOR

(d or c) button to select “4TH”.

Furthermore, if you change the current time to a

time which is at least one hour before the time

when summer time has been set to end, the time

will be displayed exactly as you have set it.

Use the CURSOR (l) button to select

“WEEK SUN”.

For example: If summer time has been set to start

at 2.00 and you change the current time setting to

2.30 (the time becomes 3.30), then time settings

between 2.00 and 2.59 will be carried out

automatically.

Use the CURSOR (l) button to select

“MONTH 10”.

Use the CURSOR (l) button to select

“HOUR 02” and then use the CURSOR (d

or c) button to set the hour to “14”.

For example: If summer time has been set to end

at 2.00 and you change the current time setting to

1.30 (the time becomes 1.30), then in this case you

cannot set the time to between 1.00 and 1.59.

Use the CURSOR (l) button to select

“MINUTE 00”.

(SUMMER TIME/DAYLIGHT SET)

(CLOCK SET)

YEAR------------------2002

MONTH----------------- 08

DAY------------------- 02

HOUR------------------ 02

MINUTE---------------- 30

SECOND---------------- 00

FORM------------MM/DD/YYYY

CLOCK START----------- YES

MODE ----------------

When all settings have been completed,

press the MENU button to return to the

SETTINGS screen.

(START) (END) START

WEEK

1ST LAST

FAST

SUN

MONTH

HOUR

Keep pressing the MENU button to return to

the MAIN MENU screen.

MINUTE

(SUMMER TIME/DAYLIGHT SET)

(CLOCK START)

MODE ----------------

END

LAST

SUN

MODE ----------------

(START) (END)

END

4TH

SUN

2002/08/02 *3:30:00

(START) (END)

1ST LAST

WEEK

LAST LAST

SUN

MONTH

HOUR

MONTH

HOUR

MINUTE

[MENU] (SETTING)

Note: If the start time (START) and end time

(END) settings are the same, the time will

not change between standard time and

summer time, and the ST/DL setting in the

CONDITION will be set to “OFF”.

English

_{Download from Www.Somanuals.co}2_m7_{. All Manuals Search And Download.}

KEY WORD SETTING (KEY WORD SET)

These settings are useful for identifying image data when transferring it to a computer. In addition, the key

word setting status and the settings for the alarm recording area on the hard disk can be confirmed at the

CONDITION screen. You can also set passwords to protect important image data.

(KEY WORD SET)

FILE ID :A

CAMERA ID:

COMMENT :

CHANGE PASSWORD (DELETE)

CHANGE PASSWORD (INITIAL)

1 FILE ID: The file ID is initially set to “A”. You

can set a single character to appear at the front

of the file when transferring images which have

been recorded by this camera to a computer.

5 CHANGE PASSWORD (INITIAL): You can set a

password which must be entered in order to

initialize the hard disk. This password can be up

to eight characters long. When the hard disk is

initialized, all data on the hard disk is deleted, so

it is highly recommended that this password be

set by the camera operator.

2 CAMERA ID: When this camera is one of

several cameras being used, up to five

characters can be specified as the identifying

name for the camera. This is useful for

identifying image data.

3 COMMENT: When this camera is one of several

cameras being used, you can enter a comment

of up to 36 characters to describe the setting-up

location for the camera.

4 CHANGE PASSWORD (DELETE): If necessary,

you can set a password which must be entered

in order to delete files. This password can be up

to eight characters long.

☞ About passwords

When using the camera for the first time, you can

use the CURSOR button to select “END” from the

character palette and then press the SET button to

continue editing and deleting images without

having to set a password. You only have to set a

password if you think that a password might be

needed.

_{Download from Www.Somanuals.co}2_m8_{. All Manuals Search And Download.}

English

KEY WORD SETTING (KEY WORD SET)

Entering a file ID (1 character)

Example: To enter “P” as the file ID

Use the CURSOR (j or l) button to

select “SETTINGS” and then press the SET

button.

Use the CURSOR button to select the letter

“P” from the character palette and then

press the SET button.

The SETTINGS screen will be displayed.

When the character has been set, the cursor

will move automatically to “END”.

Use the CURSOR (j or l) button to

select “KEY WORD SET” and then press

the SET button.

(KEY WORD SET)

SET

FILE ID :P

The KEY WORD SET screen will be displayed.

ABCDEFGHIJKLM

NOPQRSTUVWXYZ

0123456789

BS END

(KEY WORD SET)

FILE ID :A

CAMERA ID:

SET

COMMENT

CHANGE PASSWORD (DELETE)

CHANGE PASSWORD (INITIAL)

Press the SET button.

The display will return to the KEY WORD SET

screen.

When all settings have been completed,

press the MENU button to return to the

KEY WORD SET screen.

Use the CURSOR (l) button to select

“FILE ID” and then press the SET button.

You can then set the file ID in the KEY WORD

SET screen.

Keep pressing the MENU button to return to

the MAIN MENU screen.

(KEY WORD SET)

FILE ID :A

SET

ABCDEFGHIJKLM

NOPQRSTUVWXYZ

0123456789

BS END

English

_{Download from Www.Somanuals.co}2_m9_{. All Manuals Search And Download.}

Setting a camera ID (5 characters)

Example: To set the camera ID to “HALL1”

Use the CURSOR (l or j) button to select

“SETTINGS” and then press the SET

button.

Press the SET button.

The display will return to the KEY WORD SET

screen.

The SETTINGS screen will be displayed.

When all settings have been completed,

press the MENU button to return to the

SETTINGS screen.

Use the CURSOR (j or l) button to select

“KEY WORD SET” and then press the SET

button.

Keep pressing the MENU button to return to

the MAIN MENU screen.

The KEY WORD SET screen will be displayed.

Use the CURSOR (l) button to select

“CAMERA ID” and then press the SET

button.

You can then set the camera ID in the KEY

WORD SET screen.

(KEY WORD SET)

FILE ID :P

CAMERA ID:

SET

COMMENT

CHANGE PASSWORD (DELETE)

CHANGE PASSWORD (INITIAL)

(KEY WORD SET)

CAMERA ID:

ABCDEFGHIJKLM

NOPQRSTUVWXYZ

0123456789.,

/-$&#'”()

END

Use the CURSOR button to select the

characters “H” in order from the character

palette, and the press the SET button.

Enter “ALL1” in same way.

When five characters have been selected, the

cursor will move automatically to “END”.

SET

(KEY WORD SET)

CAMERA ID:HALL1

_{Download from Www.Somanuals.co}3_m0_{. All Manuals Search And Download.}

English

KEY WORD SETTING (KEY WORD SET)

Entering a comments (up to 36 characters)

Example: Entering “SANYO DIGITAL RECORDING CAMERA” as a comment

Use the CURSOR (l or j) button to

select “SETTINGS” and then press the SET

button.

Use the CURSOR button and the SET

button to select “SANYO DIGITAL

RECORDING CAMERA” from the character

palette.

The SETTINGS screen will be displayed.

1 Use the CURSOR button to select “S” and

then press the SET button.

Use the CURSOR (j or l) button to

select “KEY WORD SET” and then press

the SET button.

Enter “ANYO” in the same way.

2 Use the CURSOR button to select the

blank character below the letter “N” and

then press the SET button.

The KEY WORD SET screen will be displayed.

A space will be inserted after “SANYO”.

Enter “DIGITAL RECORDING CAMERA”

in the same way. Enter spaces in the first

line in order to move to the second line.

Use the CURSOR (l) button to select

“COMMENT” and then press the SET

button.

You can then set the comment in the KEY

WORD SET screen.

3 Use the CURSOR button to select “END”

and then press the SET button.

The display will return to the KEY WORD

SET screen.

(KEY WORD SET)

FILE ID :P

CAMERA ID:HALL1

SET

COMMENT

(KEY WORD SET)

COMMENT :S

COMMENT :SANYO

CHANGE PASSWORD (DELETE)

CHANGE PASSWORD (INITIAL)

ABCDEFGHIJKLM

NOPQRSTUVWXYZ

0123456789.,

ABCDEFGHIJKLM

NOPQRSTUVWXYZ

0123456789.,

/-$&#'”()

END

/-$&#'”()

END

(KEY WORD SET)

SET

COMMENT :SANYO DIGITAL

RECORDING CAMERA

ABCDEFGHIJKLM

NOPQRSTUVWXYZ

0123456789.,

/-$&#'”()

END

When all settings have been completed,

press the MENU button to return to the

KEY WORD SET (for after setting) screen.

Keep pressing the MENU button to return to

the MAIN MENU screen.

English

_{Download from Www.Somanuals.co}3_m1_{. All Manuals Search And Download.}

Entering a password for deleting files (CHANGE PASSWORD

(DELETE))

This password is used when “DELETE” is selected from the FUNCTIONS screen during image playback

(ALARM, SUSPICION, ARCHIVE and EXTENSION).

The passwords are not set in the initial settings.

Example: Set the password to “CAMERA”.

Use the CURSOR (l or j) button to select

Use the CURSOR (l) button to select

“SETTINGS” and then press the SET button.

“END” and then press the SET button.

The SETTINGS screen will be displayed.

The initial setting “END” will be cleared and

the cursor will move to the “NEW

PASSWORD” box.

Use the CURSOR (j or l) button to select

“KEY WORD SET” and then press the SET

button.

(CHANGE PASSWORD-DELETE)

OLD PASSWORD:

NEW PASSWORD:

VERIFICATION:

NEW PASSWORD:

VERIFICATION:

The KEY WORD SET screen will be displayed.

ABCDEFGHIJKLM

NOPQRSTUVWXYZ

0123456789

BS END

ABCDEFGHIJKLM

NOPQRSTUVWXYZ

0123456789

BS END

Use the CURSOR (l) button to select

“CHANGE PASSWORD (DELETE)” and then

press the SET button.

SET

The cursor will move to the “OLD PASSWORD”

box in the CHANGE PASSWORD-DELETE screen.

(KEY WORD SET)

FILE ID :P

(CHANGE PASSWORD-DELETE)

OLD PASSWORD:

CAMERA ID:HALL1

NEW PASSWORD:

COMMENT :SANYO DIGITAL

RECORDING CAMERA

CHANGE PASSWORD (DELETE)

CHANGE PASSWORD (INITIAL)

VERIFICATION:

Use the CURSOR button to select “C” and

then press the SET button.

ABCDEFGHIJKLM

NOPQRSTUVWXYZ

0123456789

BS END

The selected letter will appear as “ö”. Enter

“AMERA” in the same way.

SET

(CHANGE PASSWORD-DELETE)

OLD PASSWORD:

NEW PASSWORD:******

VERIFICATION:

OLD PASSWORD:

NEW PASSWORD:*

VERIFICATION:

ABCDEFGHIJKLM

NOPQRSTUVWXYZ

0123456789

BS END

ABCDEFGHIJKLM

NOPQRSTUVWXYZ

0123456789

BS END

SET

_{Download from Www.Somanuals.co}3_m2_{. All Manuals Search And Download.}

English

KEY WORD SETTING (KEY WORD SET)

Use the CURSOR (l) button to select

“END” and then press the SET button.

The password (CAMERA) will appear as

“öööööö” and the cursor will move to the

“VERIFICATION” box.

This prompts you to verify that the password

you have entered is correct.

(CHANGE PASSWORD-DELETE)

OLD PASSWORD:

NEW PASSWORD:******

VERIFICATION:

SET

ABCDEFGHIJKLM

NOPQRSTUVWXYZ

0123456789

BS END

Use the CURSOR button and the SET

button to enter “CAMERA” once more,

and then select “END” and press the SET

button.

The display will return to the KEY WORD SET

screen and the password for deleting images

will be set to “CAMERA”.

(CHANGE PASSWORD-DELETE)

OLD PASSWORD:

NEW PASSWORD:******

VERIFICATION:******

SET

ABCDEFGHIJKLM

NOPQRSTUVWXYZ

0123456789

BS END

When all settings have been completed,

press the MENU button to return to the

SETTINGS screen.

Keep pressing the MENU button to return to

the MAIN MENU screen.

English

_{Download from Www.Somanuals.co}3_m3_{. All Manuals Search And Download.}

Setting a password for initializing the hard disk

(CHANGE PASSWORD (INITIAL))

This password is used when “INITIALIZE” is selected from the HDD SET screen.

Example: To change the initial setting of “END” to “CMR”

Use the CURSOR (l or j) button to select

Use the CURSOR (l) button to select

“SETTINGS” and then press the SET button.

“END” and then press the SET button.

The SETTINGS screen will be displayed.

The initial setting “END” will be cleared and

the cursor will move to the “NEW

PASSWORD” box.

Use the CURSOR (j or l) button to select

“KEY WORD SET” and then press the SET

button.

(CHANGE PASSWORD-INITIALIZE)

OLD PASSWORD:

NEW PASSWORD:

OLD PASSWORD:

NEW PASSWORD:

VERIFICATION:

The KEY WORD SET screen will be displayed.

ABCDEFGHIJKLM

NOPQRSTUVWXYZ

0123456789

BS END

ABCDEFGHIJKLM

NOPQRSTUVWXYZ

0123456789

BS END

Use the CURSOR (l) button to select

“CHANGE PASSWORD (INITIAL)” and then

press the SET button.

SET

The cursor will move to the “OLD

PASSWORD” box in the CHANGE

PASSWORD-INITIALIZEscreen.

(KEY WORD SET)

FILE ID :P

(CHANGE PASSWORD-INITIALIZE)

OLD PASSWORD:

CAMERA ID:HALL1

COMMENT :SANYO DIGITAL

RECORDING CAMERA

CHANGE PASSWORD (DELETE)

CHANGE PASSWORD (INITIAL)

NEW PASSWORD:

VERIFICATION:

Use the CURSOR button to select “C” and

then press the SET button.

ABCDEFGHIJKLM

NOPQRSTUVWXYZ

0123456789

BS END

The selected letter will appear as “ö”. Enter

“MR” in the same way.

(CHANGE PASSWORD-INITIALIZE)

OLD PASSWORD:

NEW PASSWORD:***

VERIFICATION:

SET

OLD PASSWORD:

NEW PASSWORD:*

VERIFICATION:

ABCDEFGHIJKLM

NOPQRSTUVWXYZ

0123456789

BS END

ABCDEFGHIJKLM

NOPQRSTUVWXYZ

0123456789

BS END

SET

_{Download from Www.Somanuals.co}3_m4_{. All Manuals Search And Download.}

English

KEY WORD SETTING (KEY WORD SET)

Use the CURSOR (l) button to select

“END” and then press the SET button.

The password (CMR) will appear as “ööö”

and the cursor will move to the

“VERIFICATION” box.

This prompts you to verify that the password

you have entered is correct.

(CHANGE PASSWORD-INITIALIZE)

OLD PASSWORD:

NEW PASSWORD:***

VERIFICATION:

SET

ABCDEFGHIJKLM

NOPQRSTUVWXYZ

0123456789

BS END

Use the CURSOR button and the SET

button to enter “CMR” once more, and

then select “END” and press the SET

button.

The display will return to the KEY WORD SET

screen and the password for initializing the

hard disk will be set to “CMR”.

(CHANGE PASSWORD-INITIALIZE)

OLD PASSWORD:

NEW PASSWORD:***

VERIFICATION:***

SET

ABCDEFGHIJKLM

NOPQRSTUVWXYZ

0123456789

BS END

When all settings have been completed,

press the MENU button to return to the

SETTINGS screen.

Keep pressing the MENU button to return to

the MAIN MENU screen.

English

_{Download from Www.Somanuals.co}3_m5_{. All Manuals Search And Download.}

Example: If DIGITAL has been entered as

DIHITAL (using COMMENT palettes)

Correcting characters

The following two character palettes are used:

☞ For CAMERA ID and COMMENT settings

Use the CURSOR button to select 4 (or

3) from the character palette.

(KEY WORD SET)

CAMERA ID:HALL1

COMMENT :SANYO DIHITAL

RECORDING CAMERA

ABCDEFGHIJKLM

NOPQRSTUVWXYZ

0123456789.,

ABCDEFGHIJKLM

NOPQRSTUVWXYZ

0123456789.,

/-$&#'”()

END

/-$&#’”()

END

☞ For PASSWORD or CAMERA ID setting

(CHANGE PASSWORD-DELETE)

OLD PASSWORD:

NEW PASSWORD:

Keep pressing the SET button to select “H”.

The correction cursor (b) will move to “H”.

VERIFICATION:

(KEY WORD SET)

ABCDEFGHIJKLM

NOPQRSTUVWXYZ

0123456789

BS END

COMMENT :SANYO DIGITAL

RECORDING CAMERA

ABCDEFGHIJKLM

NOPQRSTUVWXYZ

0123456789.,

/-$&#’”()

END

Use the CURSOR button to select “G” from

the character palette and then press the

SET button.

(KEY WORD SET)

COMMENT :SANYO DIGITAL

RECORDING CAMERA

ABCDEFGHIJKLM

NOPQRSTUVWXYZ

0123456789.,

/-$&#’”()

END

Use the CURSOR button to select “END”

from the character palette and then press

the SET button.

When inserting spaces between characters, move

the cursor to the blank character below the letter

“N” and then press the SET button.

_{Download from Www.Somanuals.co}3_m6_{. All Manuals Search And Download.}

English

CHECKING THE CAMERA SETTING STATUS

The principal settings can be viewed on-screen. To check the settings, use the CURSOR (j or l) button to

select “CONDITION” from the MAIN MENU screen and then press the SET button.

Press the MENU button to return to the MAIN MENU screen.

•

(MAIN MENU)

RECORD START

PLAYBACK

SETTINGS

CONDITION

CONDIITION

TIME: 22002/0088/02 15::15:20

PRE: 115MIN

SUSPIICION:

FRAMERRATE: 33FFPS ST/DDL:OFF

POST:: 30MIN

150/ 68834PCS

FILE ID: A

COMMENT:

ID:

[MENU] (MMAIN MMENU)

1 Checking the CLOCK SET settings

5 Checking the KEY WORD SET settings

This shows the current time that has been set.

A “ö” in front of the time indicates that it is

summer time.

FILE ID: Shows the file ID that has been set

•

CAMERA ID: Shows the camera ID that has

been set

COMMENT: Shows the comment which has

•

2 Checking the HDD SET settings

been set

This shows the recording time for the alarm

recording area, and also shows the remaining

number of images that can be recorded.

PRE: Shows the number of minutes of

•

recording time for the pre-alarm

recording area

POST: Shows the number of minutes of

•

recording time for the post-alarm

recording area

SUSPICION: Shows the recording number

•

of images that can be recorded

(left) in the suspicion recording

area and the total recording

number set (right)

3 Checking the SYSTEM SET settings

FRAMERATE: Shows the frame rate for

suspicion recording

1 FPS: 1 still image recording per second

•

3 FPS: 3 still images recording per second

4 Checking the SUMMER TIME/DAYLIGHT SET

settings

ON: Summer time is currently being used

OFF: Summer time is not currently being used.

English

_{Download from Www.Somanuals.co}3_m7_{. All Manuals Search And Download.}

SETTING THE RECORDING METHOD

Note:

Illumination

•

The shutter speed for this camera is set

automatically in accordance with the brightness of

the object being recorded. If the object being

recorded is moving and the resulting images are

out of focus, increase the amount of illumination.

Image quality

•

The images on the monitor screen comply with a

digital image format (VGA equivalent: 640 x 480

dots), so the resolution will appear less sharp than

images which are displayed on a computer screen.

Download from Www.Somanuals.com. All Manuals Search And Download.

SETTING THE RECORDING METHOD

Before using this camera, make sure that you set the current date and time. Recording will not be

possible if they have not been set. (See page 22)

The images which are recorded by this camera (three images per second) are saved onto the hard disk. The initial

settings for the hard disk are shown in the illustration, but each of the settings can be changed if required.

For details on changing the hard disk settings, refer to “HDD SET” in the SETTINGS screen. (See page 24)

(HDD SET)

<ALARM TIME

<PRE ALARM

<POST ALARM

45MIN>

15MIN>

30MIN>

SPACE SET

INITIALIZE

[MENU] (SETTINGS)

1 Number of images that can be stored in the

Alarm recording

suspicion recording area

Alarm recording can be divided into pre-alarm

recording, post-alarm recording and backup recording.

For each method, images are recorded in the alarm

recording area of the hard disk. The recording time

can be set to between 10 and 90 minutes.

2 Total recording time available in the alarm

recording area

3 Recording time available in the pre-alarm

recording area

☞ Pre-alarm (PRE1) recording

4 Recording time available in the post-alarm

This is the normal method used for recording images.

When “RECORD START” is selected, pre-alarm

recording starts automatically. Images are recorded in

the pre-alarm (PRE1) recording area of the hard disk.

recording area

5 Used for changing the alarm time (automatic or

number of suspicion images)

For example, if the ALARM TIME recording period is

set to the initial setting of 45 minutes, continuous

recording to the pre-alarm area for 45 minutes occurs

if no post-alarm recording is carried out. However, if

the H (HOLD-UP) switch at the rear of the camera is

turned on, the images recorded during the first 30

minutes of the 45-minute pre-alarm recording period

are deleted, and this space then becomes the

post-alarm recording area (POST ALARM 30 min) and

is used for post-alarm recording. The pre-alarm

recording area (PRE ALARM 15 MIN) is maintained

according to the settings.

6 Used for hard disk initialization

The two available methods of recording the

captured images are alarm recording and

suspicion recording.

If the H (HOLD-UP) switch at the rear of the camera is

not operated while recording images in the alarm

recording area, then once recording has continued for

the full length of time that has been set, it starts again

automatically from the beginning of the hard disk and

the images which are already on the hard disk are

overwritten. This operation is continually repeated until

recording is stopped.

☞ Post-alarm (POST-1) recording

A switch must be connected to the H (HOLD-UP)

terminal at the rear of the camera for post-alarm

recording to be carried out. Post-alarm recording is

then carried out while the hold-up (H) switch is turned

on.

For example, if new images are recorded at the

beginning of the hard disk over the top of old images,

then once 2 minutes and 30 seconds of new images

have been recorded, 5 minutes’ worth of old images

will be deleted automatically.

If the switch which is connected to the H terminal is

pressed and held during pre-alarm recording, the

recording mode changes from pre-alarm recording to

post-alarm recording. The images are recorded in the

post-alarm (POST1) recording area of the hard disk.

English

_{Download from Www.Somanuals.co}3_m9_{. All Manuals Search And Download.}

☞ Backup recording

If there is 20 minutes or more of available recording

time remaining in the post-alarm recording area of

the hard disk after post-alarm (POST1) recording is

completed, pre-alarm 2 (PRE2) recording [which is

distinct from pre-alarm (PRE1) recording] starts

automatically. If the hold-up (H) switch is then

pressed, post-alarm 2 (POST2) recording [which is

distinct from post-alarm (POST1) recording] starts.

The recording time for backup recording is set

automatically according to the ratio between the

pre-alarm 2 (PRE2) and the post-alarm 2 (POST2)

recording times.

Note:

If any of the following occur, “ALARM REC FULL”

will be displayed on the screen and recording in the

alarm recording area will no longer be possible.

At such times, transfer the image data to a

computer and clear the images from the alarm

recording area, or re-initialize the hard disk.

If the pre-alarm and post-alarm recording areas

become full

•

When post-alarm 2 (POST2) recording is

complete, because this is the final recording

area used

•

If the available recording time for alarm

recording is reduced to 20 minutes or less.

•

Suspicion recording

This recording method is used at times such as

when a suspicious individual is noticed. A switch

must be connected to the S (SUSPICION) terminal

at the rear of the camera for suspicion recording to

be carried out. If the switch which is connected to

the S terminal is pressed during pre-alarm

recording, the recording mode changes from

pre-alarm recording to suspicion recording. The

images are recorded in the suspicion recording area

of the hard disk. The number of images that can be

recorded is set automatically to between 11,565

and 502 images, depending on the alarm recording

time setting.

_{Download from Www.Somanuals.co}4_m0_{. All Manuals Search And Download.}

English

SETTING THE RECORDING METHOD

Pre-alarm recording flow

Pre-alarm (PRE1) area recording in progress

Images at 10:00:00

Images at 10:05:00

PRE1-ALARM REC

REMAIN SHOTS:6834

Post-alarm (POST1) area recording in progress

Images at 10:20:00

Images at 10:21:00

POST1-ALARM REC

REMAIN SHOTS:6834

Post-alarm (POST1) area recording in progress

Images at 10:24:00

Post-alarm (POST2) area recording in progress

Images at 10:25:00

3 4

PRE2-ALARM REC

POST1-ALARM REC

REMAIN SHOTS:6834

Post-alarm (POST2) area recording in progress

Images at 10:27:00

Images at 10:28:00

POST2-ALARM REC

PPOOSSTT22--AALLAARRMM RREECC

REMAIN SHOTS:6834

Pre-alarm (PRE1) recording starts from

10:00:00

Backup recording starts.

If there is 20 minutes or more of available

Images are stored to the pre-alarm recording area.

recording time remaining in the alarm recording

area of the hard disk, pre-alarm (PRE2) recording

starts automatically at 10:25:00.

An emergency situation develops at

10:20:00, and you want to record images

in the post-alarm area.

An emergency situation develops again at

10:27:00 and you want to record images in

the post-alarm2 area.

Post-alarm (POST1) recording starts when the

hold-up switch is pressed and held.

Post-alarm (POST2) recording starts when the alarm

switch is pressed and held.

Post-alarm recording is stopped at

10:25:00.

Post-alarm recording is stopped at

10:29:00.

Post-alarm (POST1) recording stops when the

hold-up switch is released.

When the hold-up switch is released, “ALARM REC

FULL” appears on the screen and recording stops.

English

_{Download from Www.Somanuals.co}4_m1_{. All Manuals Search And Download.}

PRE1-ALARM REC

Screen displays

1 Display during recording

During recording, the screen display will switch off

after 30 seconds have passed. You can make the

screen display re-appear by pressing the SET or

CURSOR button.

•

REMAIN SHOTS: 6834

The screen display can be set to switch off immediately

from the start of recording. To do this, set “CAUTION

LED” on the SYSTEM SET screen to OFF. To re-display

the screen, set it back to ON. (See page 23)

•

2 Number of suspicion recording images

Pre-alarm recording

NTSC

Press the MENU button.

SET

PAL

The MAIN MENU screen will be displayed.

If the MAIN MENU screen remains displayed for about

30 seconds, pre-alarm recording will then start

automatically.

(MAIN MENU)

RECORD START

PLAYBACK

SETTINGS

CONDITION

Use the CURSOR (j or l) button to select

PRE1-ALARM REC

“RECORD START” and then press the SET button.

SET

“PRE1-ALARM REC” will be displayed and

pre-alarm (PRE1) recording will start.

The warning indicator and caution

indicator both light during pre-alarm

recording.

REMAIN SHOTS: 6834

Note: Pre-alarm recording will continue with the images being recorded in the pre-alarm (PRE1) area of the

hard disk until the hold-up switch or suspicion switch at the back of the camera is pressed.

Press the MENU button to stop recording.

The display will return to the MAIN MENU screen.

_{Download from Www.Somanuals.co}4_m2_{. All Manuals Search And Download.}

English

SETTING THE RECORDING METHOD

Post-alarm recording

(MAIN MENU)

RECORD START

PLAYBACK

SETTINGS

CONDITION

Press the MENU button.

The MAIN MENU screen will be displayed.

Use the CURSOR (j or l) button to select

PRE1-ALARM REC

“RECORD START” and then press the SET button.

SET

The warning indicator and caution

indicator both light during post-alarm

recording.

“PRE1-ALARM REC” will be displayed and

pre-alarm (PRE1) recording will then start.

REMAIN SHOTS: 6834

Press and hold the H (HOLD-UP) switch (rear panel).

POST1-AALARM REC

“POST1-ALARM REC” will be displayed and post-alarm

1 (POST1) recording will start.

Post-alarm recording will stop when the hold-up switch is

released, or when the post-alarm recording time which

was initially set has passed.

REMAIN SHOTS: 6834

Release the H (HOLD-UP) switch to stop recording.

If there is 20 minutes or more of available recording time remaining in the post-alarm recording

area, pre-alarm 2 (PRE2) recording starts automatically.

•

When the recording area becomes full, “ALARM REC FULL” will be displayed and recording will no

longer be possible.

•

English

_{Download from Www.Somanuals.co}4_m3_{. All Manuals Search And Download.}

Backup recording

If there is 20 minutes or more of available recording time remaining in the post-alarm recording area of the

hard disk after post-alarm recording is completed, backup recording (pre-alarm 2 (PRE2) recording) starts

automatically. It follows from this that if there is not 20 minutes or more of time remaining, backup

recording is not carried out.

PRE2-ALLARM REC

Pre-alarm 2 (PRE2) recording starts automatically.

“PRE2-ALARM REC” is displayed.

REMAIN SHOTS: 6834

If an emergency situation develops, press and hold

the H (HOLD-UP) switch.

POST2-AALARM REC

“POST2-ALARM REC” will be displayed and post-alarm

2 (POST2) recording will start.

REMAIN SHOTS: 6834

When the emergency situation has ended, release the H (HOLD-UP) switch.

“ALARM REC FULL” will be displayed and alarm recording will end.

Note:

When post-alarm 2 (POST2) recording has ended, there will not be any more space available for recording,

and so it will not be possible to continue alarm recording. To re-start pre-alarm recording, transfer the image

data to a computer and then carry out either one of the following two operations.

Select “DELETE” from the FUNCTIONS screen, and delete all of the image data. (See page 73)

•

Select “INITIALIZE” from the HDD SET sub-screen of the SETTINGS screen and re-initialize the hard disk.

(See page 24)

_{Download from Www.Somanuals.co}4_m4_{. All Manuals Search And Download.}

English

Radica Games Games 73049 User Guide
RCA Car Video System DRC220N User Guide
RCA Cordless Telephone 00004194 User Guide
RCA Flat Panel Television D40W15B User Guide
RedMax Edger HE250F User Guide
Ricoh All in One Printer H545 User Guide
RIDGID Cordless Saw R8442 User Guide
Ryobi Battery Charger 130155001 User Guide
Schumacher Battery Charger SC 8010A User Guide
Sears Refrigerator 53471 User Guide