OWNER’S MANUAL
GUIDE D’UTILISATION
24” CLASS LED-LCD HDTV WITH DVD PLAYER
LED-LCD HDTV CATÉGORIE 24 PO ET LECTEUR DVD
SLEDVD249
ATTENTION
ATTENTION
If you purchase a universal remote control from your local retailer, please contact the remote manufacturer for the
required programming code.
Si vous utilisez avec cet appareil une télécommande universelle (autre que celle vendue avec ce téléviseur),
consultez la documentation accompagnant la télécommande universelle afin de connaître le code numérique cor-
respondant au téléviseur.
AIR/CABLE MODE SELECTION
SÉLECTION DU MODE AIR/CABLE
When shipped from the factory, the Signal Type option is set to the “Cable” (Cable Television) mode.
If not using Cable TV, set this menu option to the “Air” position.
Lorsque l’appareil sort de l’usine, l’option Signal Type est en mode « Cable » (câblodistribution). Si vous
n’utilisez pas la câblodistribution, sélectionnez l’option « Air ».
IF CONTACT WITH CUSTOMER SERVICE IS REQUIRED
PLEASE HAVE THE MODEL NUMBER READY PRIOR TO THE CALL
SI VOUS DEVEZ COMMUNIQUER AVEC LE SERVICE CLIENTÈLE, PRENEZ NOTE
DU NUMÉRO DE MODÈLE AVANT D’APPELER.
CUSTOMER SERVICE – 1-800-289-0980
SERVICE/SERVICE CLIENTÈLE: 1-800-289-0980
ORION WEBSITE
SITE WEB ORION
FOR INFORMATION ON OUR OTHER PRODUCTS, TO ORDER ACCESSORIES ONLINE,
OR FOR RECYCLING INFORMATION, PLEASEVISIT OUR WEBSITE AT
POUR OBTENIR DES INFORMATIONS SUR NOS AUTRES PRODUITS, POUR COMMANDER DES ACCESSOIRES,
OU LE RECYCLAGE, VEUILLEZVISITER NOTRE SITE WEB:
Before operating the unit, please read this manual thoroughly.
Avant de faire fonctionner l’appareil, veuillez lire le présent guide attentivement.
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
15) Apparatus should not be exposed to dripping or splashing, and objects filled with liquids, such
as vases, should not be placed on the apparatus.
16) An outside antenna system should not be located in the vicinity of overhead power lines or
other electric light or power circuits, or where it can fall into such power lines or circuits. When
installing an outside antenna system, extreme care should be taken to keep from touching such
power lines or circuits, as contact with them might be fatal.
17) Do not overload wall outlets and extension cords, as this can result in a risk of fire or electric
shock.
18) Do not push objects through any openings in this unit, as they may touch dangerous voltage
points or short out parts that could result in fire or electric shock. Never spill or spray any type of
liquid into the unit.
EXAMPLE OF ANTENNA GROUNDING AS PER THE
NATIONAL ELECTRICAL CODE
19) If an outside antenna or cable system is
ANTENNA
LEAD IN WIRE
connected to the unit, be sure the antenna or
cable system is grounded to provide some
protection against voltage surges and built-up
static charges, Section 810 of the National
Electrical Code, ANSI/NFPA 70, provides
information with respect to proper grounding of
the mast and supporting structure, grounding
of the lead-in wire to an antenna discharge
unit, size of grounding conductors, location
of antenna discharge unit, connection to
GROUND
CLAMP
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
ELECTRIC SERVICE
EQUIPMENT
GROUND CLAMPS
NEC-NATIONAL
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
ELECTRICAL CODE
S2898A
grounding electrodes, and requirements for the grounding electrode.
20) When replacement parts are required, be sure the service technician uses replacement parts
specified by the manufacturer or those that have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric shock or other hazards.
21) Upon completion of any service or repairs to this unit, ask the service technician to perform
safety checks to determine that the unit is in proper operating condition.
22) Keep your fingers clear of the disc slot as it is closing. It may cause injury.
Download from Www.Somanuals.com. All Manuals Search And Download.
3 EN
IMPORTANT SAFETY INSTRUCTIONS
23) When you connect the product to other equipment, turn off the power and unplug all of the equipment from
the wall outlet. Failure to do so may cause an electric shock and serious personal injury. Read the owner's
manual of the other equipment carefully and follow the instructions when making any connections.
24) Reduce the volume to the minimum level before you turn on the product. Otherwise, sudden high volume
sound may cause hearing or speaker damage.
25) Do not allow the product to output distorted sound for an extended period of time. It may cause speaker
overheating and fire.
26) When you use the headphones, keep the volume at a moderate level. If you use the headphones
continuously with high volume sound, it may cause hearing damage.
27) Do not look into the opening of the disc slot or ventilation opening of the product to see the source of the
laser beam. It may cause eye damage.
28) Do not use a cracked, deformed, or repaired disc. These discs are easily broken and may cause serious
personal injury and product malfunction.
29) This reminder is provided to call the cable TV system installer’s attention to Article 820-40 of the NEC
that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be
connected to the grounding system of the building, as close to the point of cable entry as practical.
30) The socket-outlet must be installed near the unit and easily accessible.
CONDENSATION
Moisture will form in the operating section of the player if the player is brought from cool surroundings into a warm
room or if the temperature of the room rises suddenly.When this happens, player's performance will be impaired.
To prevent this, let the player stand in its new surroundings for about an hour before switching it on, or make sure
that the room temperature rises gradually.
Condensation may also form during the summer if the player is exposed to the breeze from an air conditioner. In
such cases, change the location of the player.
HOW TO HANDLE THE LCD PANEL
• Do not press hard or jolt the LCD panel. It may cause the LCD panel glass to break and injury may occur.
• If the LCD panel is broken, make absolutely sure that you do not touch the liquid in the panel. This may cause
skin inflammation.
If the liquid gets in your mouth, immediately gargle and consult with your doctor. Also, if the liquid gets in your
eyes or touches your skin, consult with your doctor after rinsing for at least 15 minutes or longer in clean water.
CHILD SAFETY:
It Makes A Difference How and Where You Use Your Flat Panel Display
Congratulations on your purchase! As you enjoy your new product, please keep these safety tips in mind:
THE ISSUE
The home theater entertainment experience is a growing trend and larger flat panel displays are popular
purchases. However, flat panel displays are not always supported on the proper stands or installed
according to the manufacturer’s recommendations.
Flat panel displays that are inappropriately situated on dressers, bookcases, shelves, desks, speakers,
chests or carts may fall over and cause injury.
THIS MANUFACTURER CARES!
The consumer electronics industry is committed to making home entertainment enjoyable and safe.
TUNE INTO SAFETY
One size does NOT fit all. Follow the manufacturer’s recommendations for the safe installation and use of
your flat panel display.
Carefully read and understand all enclosed instructions for proper use of this product.
Don’t allow children to climb on or play with furniture and television sets.
Don’t place flat panel displays on furniture that can easily be used as steps, such as a chest of drawers.
Remember that children can become excited while watching a program, especially on a “larger than life” flat
panel display. Care should be taken to place or install the display where it cannot be pushed, pulled over, or
knocked down.
Care should be taken to route all cords and cables connected to the flat panel display so that they cannot be
pulled or grabbed by curious children.
WALL MOUNTING: IF YOU DECIDE TO WALL MOUNT YOUR FLAT PANEL DISPLAY, ALWAYS:
Use a mount that has been recommended by the display manufacturer and/or listed by an independent
laboratory (such as UL, CSA, ETL).
Follow all instructions supplied by the display and wall mount manufacturers.
If you have any doubts about your ability to safely install your flat panel display, contact your retailer about
professional installation.
Make sure that the wall where you are mounting the display is appropriate to support the weight of the unit/
product and wall mount. If you are unsure, contact a professional installer.
A minimum of two people are required for installation. Flat panel displays can be heavy.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN 4
SAFETY PRECAUTIONS
The unit emits heat when in operation. Do not place any covers or blankets on the unit, this may cause
overheating. Do not block ventilation holes, or set up near radiators. Do not place in direct sunshine. When
placing on a shelf leave 4 inches (10 cm) free space around the entire unit.
4 inches
4 inches
Notes when mounting the LCD TV/DVD on a wall
• If the unit is to be mounted on the wall, contact the retailer where you purchased the LCD TV/DVD for advice,
and have the equipment professionally installed. Incomplete or improper installation may cause injury to you,
and/or damage to the LCD TV/DVD.
• To hang the television on a wall, remove these screws and then remove a stand. Before performing work
spread cushioning over the base area to lay the TV on.
• Before wall-mounting, please check carefully the location of the TV’s mounting-holes.
IMPORTANT NOTICE
Possible Adverse Effects on LCD Panel: If a fixed (non-moving) pattern remains on the LCD Panel for
long periods of time, the image can become permanently engrained in the LCD Panel and cause subtle but
permanent ghost images. This type of damage is NOT COVERED BY YOUR WARRANTY. Never leave your
LCD Panel on for long periods of time while it is displaying the following formats or images:
• Fixed Images, such as stock tickers, video game patterns, TV station logos, and websites.
• Special Formats that do not use the entire screen. For example, viewing letterbox style (16:9) media on
a normal (4:3) display (black bars at top and bottom of screen); or viewing normal style (4:3) media on a
widescreen (16:9) display (black bars on left and right sides of screen).
The following symptoms are not signs of malfunction but technical limitation. Therefore we disclaim
any responsibility for these symptoms.
• LCD Panels are manufactured using an extremely high level of precision technology, however sometimes
parts of the screen may be missing picture elements or have luminous spots.This is not a sign of a malfunction.
• Do not install the LCD Panel near electronic equipment that produces electromagnetic waves. Some
equipment placed too near this unit may cause interference.
• Effect on infrared devices – There may be interference while using infrared devices such as infrared cordless
headphones.
Download from Www.Somanuals.com. All Manuals Search And Download.
5 EN
How to attach the stand
NOTE:
• Unplug the AC cord from the wall outlet.
• Before beginning this process, assure that the TV is laid on a clean, safe, and cushioned surface to avoid any
damage to the unit.
• Do not touch or press the TV-screen, glass might break under pressure.
Place the TV on its front onto a table.
Align the stand’s bottom-plate (supplied) as seen here.
It will fit in only one direction.
Hold the unit and attach the stand frame slowly, as shown in figure 1.
Figure 2
Figure 1
Finally secure the bottom-plate with 4 screws (supplied), 4x16mm (3/16 x 5/8 inches) as indicated by the arrows
in figure 2.
• Be sure to follow the instructions. Insufficient tightening or incorrect installation of the stand will not support
your unit correctly, and could result in damage or injury from tip-over.
How to remove the stand
When you transport this product, remove the stand and pack flat against the back of the unit in the carton. To
remove the stand, perform above steps in reverse order.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN 6
Features
LCD color TV With DVD/CD player
Unique space saving design combines a 24” LED-LCD HDTV color TV and a DVD/CD player.
A DVD disc has much more capacity, but is the same size as an audio CD disc. The Picture/Audio quality of a
DVD exceeds other software. The picture quality is higher than Super VHS video cassettes. The audio quality
is higher than an audio CD. The DVD also has special options; audio language selection, subtitle language
selection, or multi-angle, etc.
The DVD PLAYER can playback both audio CDs and MP3/WMA/JPEG CDs.
Compatible with a wide range of DVD audio outputs
Digital Audio Jack (Coaxial)
• When a component with a built-in Dolby Digital decoder is connected, Dolby Digital sound can produce the
effect of being in a movie theater or a concert hall.
• Surround standard is different from Dolby Digital. This format is already in use in many theaters. By connecting
this unit to a DTS decoder or an AV amplifier with a built-in DTS decoder, the DTS audio of DVD discs
recorded in this format can be enjoyed. However, audio will not be output from the analog audio output jacks.
• By connecting this unit to an AV amplifier with a built-in MPEG decoder, the MPEG audio of DVD discs
recorded in this format can be enjoyed.
• The Linear PCM sound of a 48 kHz/24 bit through 96 kHz/24 bit exceeds audio CD sound.
Convenience Features
Direct selection of your desired scenes using Title/Chapter/Time/Track - You can playback from the
desired scene.
Recalling Up to 12 Scenes - You can program up to 12 scenes in memory and recall the marked scenes.
Frame Advance - The PAUSE/STILL and SEARCH moves one frame at a time.
Slow Motion - The SLOW moves you back and forth through the program by 4 steps of 1/16-1/2 times.
Repeat Playback - You can repeat chapter, track, title, sides or material between two selected points.
Program Playback (Audio CD/MP3/WMA CD) - You can playback tracks in programmed sequences.
Zoom - You can zoom in the selected subject on the screen during playback.
Note: Make sure that discs are suitable for the following functions.
Multi-Language - Maximum 32 language subtitles and maximum 8 language soundtracks can be played back
for movies or programs.
Multi-Angle - Pictures of Sports or a Live Concert are recorded with many cameras. When you play such a disc,
you can change the angles during playback.
Parental Control - You can limit the playback of scenes or sounds of DVD discs that have a rating level
encoded on the disc.
Video Aspect Ratio - You can change the aspect ratio of the screen for your monitor.
TV Features
Integrated Digital Tuner - You can view digital broadcasts without using a Digital TV Set-Top Box.
Closed Caption Decoder With Full Text Mode - Displays text captions or full screen text on the screen for
hearing impaired viewers.
Picture Adjustments Using The Remote Control - The On-Screen display allows precise remote control
adjustment of BRIGHTNESS, CONTRAST, COLOR, TINT and SHARPNESS.
Programmable TV Sleep Timer - Operable from the remote control, the TV can be programmed for up to 120
minutes to turn off automatically.
On-Screen 3 Languages Display - You can select one of 3 languages, English, French or Spanish for on-
screen programming.
V-Chip - The V-Chip function can read the rating of a TV program or movie content if the program is encoded
with this information. V-Chip will allow you to set a restriction level.
* This item incorporates copy protection technology that is protected by U.S. patents and other intellectual
property rights of Rovi Corporation. Reverse engineering and disassembly are prohibited.
*
is a trademark of DVD Format/Logo Licensing Corporation.
* Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of
Dolby Laboratories.
* The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or
registered trademarks of HDMI Licensing LLC in the United States and other countries.
Download from Www.Somanuals.com. All Manuals Search And Download.
7 EN
Contents
Before using your unit
DVD Operation
DVD Operation................................................23
Status display of disc ......................................23
Playback procedure........................................23
Special playback.............................................24
Zooming..........................................................24
Locating desired scene...................................24
A-B Repeat playback ......................................24
Marking desired scenes..................................25
Changing angles.............................................25
Changing soundtrack language ......................25
Subtitles..........................................................25
Using HOME MENU .......................................26
Play mode.......................................................26
Audio Settings menu.......................................27
Video Adjust menu..........................................28
Quick guide for DVD menu operation..............28
IMPORTANT SAFETY INSTRUCTIONS...........3
SAFETY PRECAUTIONS .................................5
IMPORTANT NOTICE.......................................5
How to attach the stand ....................................6
How to remove the stand ..................................6
Features............................................................7
Contents ...........................................................8
Disc...................................................................9
Parts and functions .........................................11
Remote control ...............................................12
Power source..................................................13
Antenna connections ......................................14
Cable TV connections.....................................14
TV operation
Starting setup .................................................15 Function Setup................................................29
TV operation ...................................................15 Parental Control ..............................................30
Quick guide for menu operation......................16
Additional information
Convenience functions ...................................17
Memorizing channels......................................18
Checking the digital signal strength ................19
Labeling channels...........................................19
Labeling video inputs......................................19
Setting the V-Chip ...........................................20
Closed Caption...............................................21
CC advanced..................................................21
Setting the picture size....................................22
Language Code List........................................31
Country/Area Code List ..................................31
Connections to other equipment.....................32
Reception disturbances ..................................35
Problems and troubleshooting ........................36
Specifications ................................................38
limited WARRANTY .......................................39
Download from Www.Somanuals.com. All Manuals Search And Download.
EN 8
Disc
Playable discs
CAUTION:
Disc type and logo mark
content
• Only the left types of discs can be played on this
unit. DVD-ROM (for PC), CD-ROM (for PC), SVCD,
CVD, VCD, etc. cannot be played.
Audio
+
• This unit cannot play an 8 cm disc. It cannot also be
played even using a disc adapter.
DVD Video
Video
(moving
pictures)
• If you insert an irregular shaped disc, it may get
stuck and cause a malfunction.
• The use of a ring protector or other disc
accessories will cause errors.
CD-DA
Audio
• This unit is to be used exclusively with the NTSC
color system. PAL and SECAM system discs cannot
be used with this unit.
The following discs are also available.
• DVD-ROM/-R/-RW/-R DL discs of DVD video format.
• CD-ROM/-R/RW discs of MP3/WMA/JPEG.
• Some discs cannot be played back depending on
the recording conditions.
Region Number
Region number (Regional restriction code) is built-in to the unit and DVD video discs.
Region number “1” or “ALL” of DVD video discs can be used on this unit.
ALL
1
Title
DVD DISC
When two or more movies are recorded on a disc, the disc
is divided into two or more sections. Each section is called
a “TITLE”.
TITLE 1
CHAPTER 1
TITLE 2
CHAPTER 2
CHAPTER 2
CHAPTER 1
CHAPTER 3
Chapter
The titles can be subdivided into many sections.
Each section is called a “CHAPTER”.
Audio CD
Track
An Audio CD can contain several items.
These are assigned to the tracks.
TRACK
1
TRACK
2
TRACK
3
TRACK
4
TRACK
5
Removing Disc from Case
Be sure to hold the edge of disc. Do not touch the surface of the disc.
Pick up the disc gently from the case.
• Do not scratch the disc.
• Do not get dirt on the surface of the disc.
• Do not stick a label or adhesive tape on the disc.
• Do not drop or bend the disc.
Storing Disc
• Store the disc in the case to avoid risk of scratches, dirt or damage.
• Do not leave disc exposed to direct sunlight or in hot or humid places.
Cleaning Disc
Wipe the disc with a clean, dry cloth from center to edge.
• Do not wipe the disc in a circular motion.
• Do not use liquid or aerosol cleaners.
Download from Www.Somanuals.com. All Manuals Search And Download.
9 EN
Disc
■ Compatibilities for the PC-created disc
• You may not be able to play discs recorded
using a personal computer or recorder for disc
compatibilities, scratches or marks on the disc, dirty
lenses of the unit or condensation and so on.
• Discs recorded using a personal computer may
not be playable in this unit due to the setting of the
application software used to create the disc. In
these particular instances, check with the software
publisher for more detailed information.
■ Windows Media Audio (WMA)
compatibility
• WMA is an acronym for Windows Media Audio
and refers to an audio compression technology
developed by Microsoft Corporation.
• You can encode your files by using Windows
Media Player Ver.7, 7.1, Windows Media Player for
Windows XP or Windows Media Player 9 Series.
• When encoding your files, use only applications
approved by Microsoft Corporation. If you use a
non-approved application, it may not work properly.
• This unit is compatible with audio files recorded with
the following sampling frequency: 32 kHz, 44.1 kHz
and 48 kHz.
■ Playable files
• ISO 9660 Level 1 or 2 compliant.
Romeo and Joliet file systems are both compatible
with this player.
• It is not compatible with loss-less encoding.
• Files with extensions .wma or .WMA can be played.
• DRM (Digital Rights Management) protected files
will not play in this player.
For detailed information, please see the instruction
manuals or help files that came with your PC and/or
software.
■ Playing MP3 (MPEG-1 Audio Layer-3) files
• This unit is compatible with audio files recorded with
the following sampling frequency: 32 kHz, 44.1 kHz
and 48 kHz.
• File structure (may differ): Up to 299 folders on a
disc; up to 648 files within each folder.
• Folder and file names can be displayed as long
as they are typed in alphabets and numbers. If
folder and file names are other than alphabets and
numbers, they may be replaced and displayed like
as “_”. Garbled characters may also be displayed in
this case.
• Files with extensions .mp3 or .MP3 can be played.
• For the best quality of sound, 128 kbps or higher bit
rate is recommended.
■ Copy Control CD (CCCD)
This product is designed to conform to CD-DA
(Compact Disc Digital Audio). Any other discs than
CD-DA are not guaranteed with their operation and
performance in this product.
■ Playing image files
JPEG files recorded in DVD-R/-RW/-R DL and CD-R/-RW
can be played.
Note on copyright
• Unauthorized recording of copyrighted television
programs, films, video cassettes and other materials
may infringe the rights of copyright owners and be
contrary to copyright laws.
■ JPEG file compatibility
• Image files should be saved in JPEG format.
• Files recorded in Fuji Color CD, Kodak Picture CD
or CD-R/-RW can be played.
• Compatible formats: Baseline JPEG and EXIF 2.2*
still image files up to a resolution of 3072 x 2048.
*File format used by digital still cameras.
• Files with extensions .jpg or .JPG can be played.
• Progressive JPEG formatted files do not work.
• It may take some more time to start to play larger
files than usual.
• JPEG files with different aspect ratio may be
displayed with black bands (either vertical or
horizontal).
■ Playing Audio files
WMA and MP3 files recoded in DVD-R/-RW/-R DL,
CD-R/-RW can be played.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN 10
Parts and functions
Front
Right side
EJECT (0) button
INPUT/ENTER button
CH (CHANNEL)
/▼/ PLAY (£) buttons
VOL (VOLUME) +/–/▶/◀
buttons, MENU button
POWER button
Remote sensor
Power Indicator
Red: Standby
To display the menu screen.
Press and hold both VOL (VOLUME) +/– at the same
time for 1 second to display the menu screen.
CH (CHANNEL) buttons, VOL (VOLUME)
+/– buttons and INPUT/ENTER button can be used
to select the desired setting during the menu screen
operations.
ANT. (RF) IN jack
HEADPHONE jack
Rear
COAXIAL OUT jack
FOR SERVICE PERSONNEL USE ONLY
Do NOT insert ANY USB device into
this port. Use of this port by other than
Service Personnel may void this products
warranty.
AUDIO (L/R) IN jacks
COMPONENT IN
(Y(VIDEO)/Pb/Pr) jacks
PC MONITOR IN jack
HDMI/DVI IN jack
Download from Www.Somanuals.com. All Manuals Search And Download.
11 EN
Remote control
POWER
Power On/Off
DISPLAY/–
Call TV information
Call DVD information
Input “–” for digital channels
TV/DVD
(EJECT)
0-9
Switch between TV and DVD
Eject a disc
Direct channel selection of TV
Input setting
Enter a password
VOL +/–
MUTE
SLEEP
Adjust volume of TV
Switch off the sound
Sleep timer
SETUP/
DVD mode - Call up initial setup mode
TV mode - Display menu of TV
TV MENU
DVD MENU
Display DVD menu
Select channel of TV
Cursor buttons
CH
▲▼◀▶
/
ENTER
Enter information in the menu
EXIT/
Exit from On-Screen menu
CANCEL
Reset information in the menu
TOP MENU
SEARCH
PLAY
Select title
Fast Forward/Review playback
Playback
SKIP
SUBTITLE
STOP
Skip chapter to forward or reverse direction
Set subtitle
Stop
SLOW
Forward/Reverse- slow motion
PAUSE/
STILL
Pause CD sound
Still picture of DVD
PLAY MODE
AUDIO
RETURN
REPEAT A-B
ANGLE
Select playback mode
Change soundtrack language
Remove DVD setup menu
Repeat playback between A and B
Change playback angle
SCREEN SIZE Display Picture Size menu
MARKER
Index
CCD/
Closed Caption
JUMP
Locating desired scene
RECALL/
ZOOM
Switch between present/last channel
Zoom
INPUT SELECT Display source selection menu
Download from Www.Somanuals.com. All Manuals Search And Download.
EN 12
Remote control
Inserting Batteries
Open the battery compartment
Install two “AAA” batteries
Replace the compartment cover.
1
cover in the direction of the arrow. 2 (supplied), paying attention to the 3
polarity diagram in the battery
compartment.
Operation
• Aim the remote control at the remote sensor and press control
buttons to operate.
• Operate the remote control within a 30° angle on either side of
the remote sensor, up to a distance of approximately 15 feet.
Approximately 15 feet
NOTE:
• Do not leave the remote control unit exposed to direct sunlight or in hot or humid places.
• The remote control unit uses infrared beams to transmit signals, so sunlight or fluorescent light on the remote
sensor may shorten operating distance.
• Incorrect use of batteries may cause them to leak or burst. Read the battery warnings and use the batteries
properly.
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc), or rechargeable, (Ni-Cd, Ni-MH, etc.) batteries.
• Remove batteries if the remote control will not be operated for an extended period of time.
Power source
TO USE AC POWER SOURCE
Use the AC polarized line cord provided for operation on AC. Insert the AC cord plug into a standard 120V 60Hz
polarized AC outlet.
AC Outlet
Wider Hole and Blade
Polarized AC Cord Plug
(One blade is wider than the other.)
NOTE:
• Never connect the AC line cord plug to other than the specified voltage (120V 60Hz).
Use the attached power cord only.
• If the polarized AC cord does not fit into a non-polarized AC outlet, do not attempt to file or cut the blade.
It is the user’s responsibility to have an electrician replace the obsolete outlet.
• If you cause a static discharge when touching the unit and the unit fails to function, simply unplug the unit from
the AC outlet and plug it back in. The unit should return to normal operation.
Download from Www.Somanuals.com. All Manuals Search And Download.
13 EN
Antenna connections
If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your
antenna system. If you are using a Cable TV service, see “Cable TV connections”.
Combination VHF/UHF Antenna (Single 75 ohm cable)
Antenna
Connect the 75 ohm cable from the combination
Jack
VHF/UHF antenna to the Antenna Jack.
75 ohm
Coaxial
Cable
Cable TV connections
This TV has an extended tuning range and can tune most cable channels without using a Cable TV
Converter box. Some cable companies offer “premium pay channels” where the signal is scrambled.
Descrambling these signals for normal viewing requires the use of a descrambler device which is
generally provided by the Cable TV company.
For subscribers to basic Cable TV service
For basic Cable TV service not requiring a Converter/
75 ohm
Descrambler box, connect the 75 ohm Coaxial Cable directly
Coaxial
Cable
Antenna
Jack
to the Antenna Jack on the back of the TV.
For subscribers to scrambled Cable TV service
If you subscribe to a Cable TV service which requires the use of a Converter/Descrambler box, connect
the incoming 75 ohm Coaxial Cable to the Converter/Descrambler box. Using another 75 ohm Coaxial
Cable, connect the output jack of the Converter/Descrambler box to the Antenna Jack on the TV. Follow the
connections shown below. Set the TV to the output channel of the Converter/Descrambler box (usually channel
3 or 4) and use the Converter/Descrambler box to select channels.
Incoming
75 ohm
Cable TV
Cable
Antenna
Jack
75 ohm Cable to TV
Converter/
Descrambler
For premium
channels
If you subscribe to a Cable TV service in which basic channels are unscrambled and premium channels require
the use of a Converter/Descrambler box, you may wish to use a signal Splitter and an A/B Switch box (available
from the Cable TV company or an electronics supply store). Follow the connections shown below. With the
switch in the “B” position, you can directly tune any nonscrambled channels on your TV. With the switch in the
“A” position, tune your TV to the output of the Converter/Descrambler box (usually channel 3 or 4) and use the
Converter/Descrambler box to tune scrambled channels.
Incoming
Converter/
75 ohm
Cable TV
Cable
Antenna
Jack
Descrambler
75 ohm Cable to TV
A
A/B Switch
Splitter
B
Download from Www.Somanuals.com. All Manuals Search And Download.
EN 14
Starting setup
TV operation
The Auto Setup menu appears the first time you
turn on the TV, and assists you to specify the
Air/Cable setting, and program your channels
automatically.
To turn on the TV, press POWER.
1
(It may take approx. 10 seconds for a picture to
appear on screen.)
Adjust the volume level by pressing VOL + or – .
2
The volume level will be indicated on the screen
IMPORTANT: Make sure that the antenna or cable
TV system connection is made!
by green bars. As the volume level increases, so
do the number of bars. If the volume decreases,
the number of green bars also decreases.
To turn on the TV, press POWER (It may take
1
approx. 10 seconds for a picture to appear on
Set the Signal Type option to the appropriate
3
4
screen.).The Auto Setup function begins.
Auto Setup
position (see “Air/Cable selection” on page 18).
Press the Direct Channel Selection (0-9, –)
TV Location
Store
Off
Cable
Start
buttons to select the channel.
E-POP Demo
Signal Type
(If you press only channel number, channel
selection will be delayed for a few seconds.)
Automatic Search
TO SELECT ANALOG CHANNELS
Press ▲ or ▼ to select “TV Location”, then press
◀ or ▶ to select “Store” or “Home”. This product
qualifies for ENERGY STAR in Home mode
default setting.
2
1-9:
Press 1-9 as needed. Example, to
select channel 2, press 2, then press
ENTER.
10-99:
Press the 2 digits in order. Example,
to select channel 12, press 1, 2, then
press ENTER.
NOTE:
• This unit has been preset to STORE brightness.
This setting does not qualify under ENERGY
STAR.To reduce brightness and energy
consumption, change setting to ‘HOME’.This
setting does qualify under ENERGY STAR.
• The device may not conform to the ENERGY
STAR standard after “Reset” is performed or the
“Backlight” is adjusted.
100-135: Press the 3 digits in order. Example, to
select channel 120, press 1, 2, 0, then
press ENTER.
TO SELECT DIGITAL CHANNELS
Press the first 1-3 digits, then press the – button,
followed by the remaining number.
Example, to select channel 15-1, press 1, 5, –, 1,
then press ENTER.
Press ▲ or ▼ to select “E-POP Demo”, then press
3
◀ or ▶ to select “On” or “Off”.
• If a channel is selected with only audio content,
“Audio only” will be displayed on the screen.
• If a channel is selected with a weak digital
signal, “Digital channel signal strength is low”
will be displayed on the screen.
On: A TV feature introduction will be popped up
at the bottom of the screen.
Off: Turn off the E-POP Demo feature.
Press ▲ or ▼ to select “Signal Type”, then press
4
5
6
◀ or ▶ to select “Cable” or “Air”.
The same program may be available on either
an analog channel or a digital channel.You may
choose to watch either format.
Press ▲ or ▼ to select “Automatic Search”, then
press ▶ or ENTER.
• If a channel is selected to which you have not
subscribed, “Digital channel is encrypted” will
be displayed on the screen.
“Auto Setup” will begin. After the Auto Setup
is completed, the TV channel appears on the
screen.
• Depending on the reception condition, it may
take up to 30 minutes to complete memorizing
digital cable channels. Please allow the
process to complete without interruption.
VHF/UHF/CABLE CHANNELS
Air
VHF
Cable
VHF
NOTE:
2-13
2-13
• If you press EXIT in the process of “Auto Setup”,
the Auto Setup stops and changes to the normal
screen.
UHF
STD/HRC/IRC
14-69
14-36
(A) (W)
37-59
60-85
86-94
95-99
(AA) (WW)
(AAA) (ZZZ)
(86) (94)
• When you make a menu selection, your changes
occur immediately.You do not have to press EXIT to
see your changes.
(A-5) (A-1)
100-135 (100) (135)
01
(4A)
NOTE:
• If a channel with no broadcast is selected, the
sound will automatically be muted.
• It may take a few seconds for a digital channel
picture to appear on screen after being selected.
Download from Www.Somanuals.com. All Manuals Search And Download.
15 EN
To select the video input source
RECALL
To view a signal from another device connected to
your LCD TV, such as a VCR player, press INPUT
SELECT, then press ▲ or ▼ or corresponding
Number buttons (0-5), then press ENTER.
This button allows you to go back to the last channel
selected by pressing RECALL. Press RECALL again to
return to the last channel you were watching.
MUTE
Input Select
Press MUTE to switch off the sound. The TV’s sound
will be silenced and “Mute” will appear on the screen.
The sound can be switched back on by pressing this
button again or the VOL + or –.
0.TV
1.Video
2.Component
3.HDMI
4.PC
5.DVD
SLEEP
To set the TV to turn off after a preset amount of time,
press SLEEP on the remote control. The clock will
count up 10 minutes for each press of the SLEEP
button (Off, 0h 10m, 0h 20m, ..., 2h 0m). After the sleep
time is programmed, the display will appear briefly
every ten minutes to remind you that the sleep timer
is operating. To confirm the sleep timer setting, press
SLEEP and the remaining time will be displayed for a
few seconds. To cancel the sleep timer, press SLEEP
repeatedly until the display turns to Off.
[0-5]:Select
CH
/
Press and release CH
/
. The channel
automatically stops at the next channel set into
memory.
For proper operation, before selecting channels, they
should be set into the memory. See “Memorizing
channels” on page 18.
DISPLAY
Press DISPLAY to display the current information on
the screen.
Quick guide for menu
operation
When the TV receives a digital signal, the digital
information will appear.
Sleep Timer
Off
62-1 HDTV...Moving...Picture1...
CH-1 TV-MA
Digital Air
English
Call menu and for example: Select Language.
No Program Information is available
Press INPUT SELECT to select TV mode.
1
Full
1080i
Press TV MENU. The TV menu screen will appear.
2
Main Menu
• Channel number
• Channel label (if preset) • Broadcast program name
• V-Chip rating
• Sleep timer
• Program guide
• Resolution
• Station name
>>
Picture
Audio
CH
Channel
Lock
• Signal type
• Audio language
• Picture size
Setup
:Select
ENTER :Set
Press ▲ or ▼ to select “Setup”, then press ▶ or
3
4
When the TV receives an analog signal, the analog
ENTER.
information will appear.
Press ▲ or ▼ to select “Language”, then press ◀
or ▶ to select the desired language.
…on the following pages the menu can be called
in the same way as here.
Sleep Timer
Off
14
G
Analog Cable
Mono
Full
480i
Press EXIT to return to the normal screen.
5
NOTE:
• Channel number
• V-Chip rating
• Channel label (if preset)
• Signal type
• Picture size
• Resolution
• If no buttons are pressed for more than about 60
seconds, the menu screen will return to normal
operation automatically.
• Sleep timer
• Audio information
(Stereo, SAP or Mono)
Press DISPLAY again to clear the call display.
NOTE:
• After a few seconds, DISPLAY screen will return to
normal TV operation automatically.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN 16
Convenience functions
You can change the default settings by pressing the TV MENU button on your remote, then select the one of the
icons at the left of the menu - follow the On-Screen prompts to set your preferences.
Icon
Selected Items
Setup hint
Picture
Picture
Sports
Bright and dynamic picture (factory-set)
Preference
Standard
Movie
Memory
Standard picture quality (factory-set)
Movie-like picture setting (factory-set)
Your personal preferences (set by you; see “Picture Setting”)
You can adjust the picture quality to your preference.
Picture Setting Brightness /Contrast /
Sharpness / Color / Tint
Color Temperature
Cool (Bluish) / Standard (Neutral) / Warm (Reddish)
The Backlight feature adjusts the screen brightness for improved picture
Backlight*2
clarity.
DBC
On/Off
Use this feature to change the Black level automatically according to the
brightness of an image.The Black level will become dark in a dark scene.
Picture Size
Film Mode
PC Setting
See page 22.
On/Off
A smoother motion may be obtained by setting the Film Mode to “On” (480i only).
Hor Position /
Ver Position
To adjust the horizontal / vertical position of the image on the PC monitor
screen. Each video standard will require a different value for this setting.
Clock
Phase
To minimize any vertical bars or stripes visible on the screen background.
This must be adjusted after the frequency has been set optimize picture quality.
To adjust the all PC settings automatically.
Auto Adjust
On/Off
DNR
DNR (Digital Noise Reduction) can reduce the roughness of the picture.
Audio
Equalizer Mode Standard/Music/Movie/ You can adjust the Equalizer Mode to your preference.
News/Memory/Flat
Audio Setting Bass/Treble
Equalizer Setting
You can adjust the sound quality to your preference. (Flat mode only)
100Hz/250Hz/500Hz/1kHz/2kHz/4kHz/10kHz (Not available in Flat
mode)
Balance
Stereo / SAP / Mono
You can adjust the sound quality to your preference.
MTS
The multi-channel TV sound (MTS) feature provides high-fidelity
stereo sound. MTS also can transmit a second audio program (SAP)
containing a second language or other audio information.
When the TV receives a stereo or SAP broadcast, the word “Stereo” or
“SAP” displays on-screen every time you press DISPLAY.
Surround
On/Off
On/Off
The dynamic presence and sound created offers a thoroughly
enjoyable listening experience.
Auto Volume
Audio Language
Volume level can be adjusted automatically by the sound level.
When two or more audio languages are included in a digital signal, you can select
one of the audio languages. (This function is available only for digital broadcast.)
HDMI Audio
HDMI
DVI
When you connect the HDMI device to the TV, select this setting.
When you connect the DVI device to the TV with analog audio cords,
select this setting.
Channel Add / Delete
DTV Signal
See page 18.
See page 19.
See page 18.
See page 19.
See page 20.
See page 21.
Auto Ch Memory
Ch Label
Lock
Setup
Closed Caption
Language
You can choose from three different languages (English, Français (French) and
Español (Spanish)) for the on-screen displays.
Select the language you prefer first, then proceed with the other menu options.
Video Label
On Timer
See page 19.
Off / 0h30m / 1h00m
/ 1h30m / 2h00m /
3h00m⋅⋅⋅12h00m
You can set the On Timer to automatically turn on the TV. To cancel the
On Timer select “Off”.
Auto Shut Off*1 On/Off
If the Auto Shut Off feature is On, a station being viewed stops
broadcasting or DVD is not operated without the menu screen,and the
TV is no operation for 15 minutes, the TV will automatically shut itself off.
Auto Setup
PC Standby
See page 15.
On/Off
If the PC Standby feature is On, In PC mode, if no signal is received or
no operation performed for 1 minute, the TV will turn to standby mode
automatically (LED light will flash red). When an input signal is received
or an operation performed on the PC, the TV will return to the On mode.
The Reset function returns your Picture/Audio settings to the factory settings.
“Picture Size”, “MTS” , “Audio Language” and “HDMI Audio” cannot be
reset by this function.
Reset*2
NOTE:
*¹ If there is no input signal in the PC mode, after 1 minute Auto Shut Off will be activated. In PC mode the “PC Standby”
setting takes precedence.
2
*
The device may not conform to the Energy Star standard after “Reset” is performed or the “Backlight” is adjusted.
Download from Www.Somanuals.com. All Manuals Search And Download.
17 EN
Adding Channel
Memorizing channels
If you find a new digital channel unregistered, you can
add the new channel into the channel memory.
This TV is equipped with a channel memory
feature which allows channels to skip up or down
to the next channel set into memory, skipping
over unwanted channels. Before selecting
channels, they must be programmed into the
TV’s memory. To use this TV with an antenna, set
the Signal Type option to the Air mode. When
shipped from the factory, this menu option is in
the Cable mode.
Tune in the new channel.
1
Select “Channel ⇒ Add/Delete ⇒ Adding
2
Channel”, then press ▶ or ENTER.
CH
Add/Delete
Adding Channel
Add/Delete
Clear All
>>
>>
>>
Air/Cable selection
The new channel will be added into the channel
memory.
3
Select “Channel ⇒ Auto Ch Memory ⇒ Signal
1
2
Type”.
Add/Delete channel
You can select the channel that you want to skip.
Press ◀ or ▶ to select “Air” or “Cable”.
Air - VHF/UHF channels
Cable - CABLE TV channels
Select “Channel ⇒ Add/Delete ⇒ Add/Delete”,
1
2
then press ▶ or ENTER.
CH
Auto Ch Memory
Press ▲ or ▼ to select the channel that you want
Signal Type
Automatic Search
Cable
Start
to skip.
CH
Add/Delete
NOTE:
CH
Signal
2
3
Analog
Analog
Digital
Digital
Analog
Add
• It may take a few seconds for a digital channel
picture to appear on screen after being selected.
Add
3-1
3-2
4
Delete
Add
Delete
Automatic Search
Select “Channel ⇒ Auto Ch Memory ⇒ Automatic
1
Search”, then press ▶ or ENTER.
Press ◀ or ▶ to select “Add” or “Delete”,
3
4
whichever function you want to perform.
CH
Auto Ch Memory
Repeat steps 2 - 3 for other channels you want to
add or delete.
Signal Type
Automatic Search
Cable
Stop
Clear All
The TV will begin memorizing all the channels
available in your area.
All channels are deleted from the channel memory.
2
Select “Channel ⇒ Add/Delete ⇒ Clear All”, then
• It may take from 15 minutes to 30 minutes to
complete memorizing digital cable channels.
Depending on the reception condition, a bar
display may not advance for several minutes,
please be patient.
press ▶ or ENTER.
CH
Add/Delete
Adding Channel
Add/Delete
Clear All
>>
>>
>>
NOTE:
•
Memorizing channels is best accomplished during
evening “PRIMETIME” hours, as more stations are
broadcasting digital signals. Memorizing channels can
only be accomplished while a station is broadcasting
a digital signal to set that channel into memory.
• If you are unsure of the digital channels available
receive a list based on your address or zip code.
Should you require further assistance you may call
our toll-free customer service line at 1-800-289-0980.
• New digital channels may be added to your area
periodically, it is recommended to perform the
“Automatic Search” procedure regularly.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN 18
Repeat steps 2-3 for other channel.You can
assign a label to each channel.
Checking the digital
signal strength
4
5
When you finish inputting the label name, press
EXIT to return to the normal screen.
This TV will allow you to view the digital signal
meter for digital channels.
To clear a Ch Label
After step 2 above, press ▲ or ▼ to select “Label
Clear”, then press ▶ or ENTER.
Select “Channel ⇒ DTV Signal”, then press ▶ or
1
2
ENTER.
NOTE:
The digital signal strength screen will appear.
• The channel labels will be reset after “Automatic
Search” on page 18.
If necessary, adjust the direction of the antenna to
obtain the maximum signal strength.
CH
DTV Signal
Labeling video inputs
The Video Label feature allows you to label each
input source for your TV.
Select “Setup ⇒ Video Label”, then press ▶ or
1
2
3
0
50
100
ENTER.
Signal Level
Press ▲ or ▼ to select an input which you want to
NOTE:
label.
• Signal meter feature is not available for analog
channels.
Press ◀ or ▶ to select the desired label for that
• After 240 seconds, DTV Signal screen will return to
normal TV operation automatically.
input source.
Video Label
Video
-
-
-
-
Labeling channels
Component
HDMI
Channel label appear with the channel number
display each time you turn on the TV, select a
channel, or press DISPLAY.
PC
– / VCR / DVD / STB / Cable / Satellite / Receiver /
You can choose any four characters to identify a
channel.
Game / Camcorder / PC / DVI PC / Blu-ray
To create channel labels
Select “Channel ⇒ Ch Label”, then press ▶ or
1
2
ENTER.
Press ◀ or ▶ to select a channel you want to
label, then press ▼.
CH
Ch Label
Channel Number
Ch Label
15-1
CH-1
>>
Label Clear
Press ◀ or ▶ repeatedly until the character you
3
want appears in the first space.
CH
Ch Label
Channel Number
15-1
CH-1
>>
Ch Label
Label Clear
The characters rotation as follows:
, () @ / + =
-
-
SPACE
If the character which you desire appears, press
ENTER.
Repeat this step to enter the rest of the characters.
If you would like a blank space in the label name,
you must choose the empty space from the list of
characters.
Download from Www.Somanuals.com. All Manuals Search And Download.
19 EN
When you select TV-Y7, TV-PG, TV-14 or TV-MA,
Setting the V-Chip
press DISPLAY to explain the rating.
Genre:
An age limitation can be set to restrict children from
viewing or hearing violent scenes or pictures that you
may choose to exclude. The restriction applies to “TV
Rating” and “Movie Rating” if this data is transmitted.
You may set this restriction separately. To use the
V-Chip function, you must register a password.
D
L
: Dialogue
: Language
: Sex
S
V
:Violence
FV
: Fantasy Violence
Movie Rating
To register a password
Movie Rating
Select “Lock”, then press ▶ or ENTER.
1
G
PG
PG-13
R
Select and enter your password (4 digits) using
2
Number buttons (0-9), then press ENTER.
NC-17
X
Lock
_
New Password
* * *
G
: All ages
: Parental guidance
PG
“
” appears instead of the number.
PG-13 : Parental guidance less than 13 years old
R
: Under 17 years old parental guidance
suggested
Enter the same password again to confirm, then
press ENTER.
3
NC-17 : 17 years old and above
The password is now registered.
X
: Adult only
NOTE:
Press ▲/▼ to select the desired rating, then press
4
5
• If you forget the password, contact Customer
Service at 1-800-289-0980 for assistance.
Your original remote control will be required.
• To avoid forgetting the password, write it down and
keep in a safe place.
ENTER.
Press EXIT to return to the normal screen.
V-Chip function is activated now.
NOTE:
• The V-Chip function is activated only on programs
and input sources that include a rating signal.
How to enter the V-Chip menu
Select “Lock” menu, then press ▶ or ENTER.
1
To change the password
Use Number buttons (0-9) to enter your
2
password, then press ENTER. The V-Chip menu
In the V-Chip menu, press ▲ or ▼ to select
1
will appear.
“Change Password”, then press ▶ or ENTER.
The Change Password screen will appear.
To set the V-Chip
Enter a new password using Number buttons
2
3
In the V-Chip menu, press ◀ or ▶ to set “V-Chip”
(0-9), then press ENTER.
1
2
to “On”.
Enter the same password again to confirm, then
Press ▲ or ▼ to select “V-Chip Set”, then press ▶
press ENTER.
or ENTER.
The password is now registered.
The V-Chip Set menu will appear.
Downloading the additional V-Chip rating system
As a supplement to the standard V-Chip rating
system, your television will be able to download an
additional rating system, if such a system becomes
available in the future.
Press ▲ or ▼ to select which rating will be used,
3
then press ▶ or ENTER. Each rating below will
appear.
TV Rating
TV Rating
To download the additional V-Chip rating system
(when available)
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
In the V-Chip menu, press ◀ or ▶ to set “V-Chip”
1
2
3
to “On”.
Press ▲ or ▼ to select “V-Chip Set (DTV)”, then
You can set the rating using age level and genre.
press ▶ or ENTER.
If the TV is not storing the additional rating
Age:
system, the TV will begin downloading it, which
may take some time to be completed.
TV-Y
: All children
TV-Y7 : 7 years old and above
TV-G
: General audience
Set your preferred content rating limits for the
4
5
TV-PG : Parental guidance
additional rating system.
TV-14 : 14 years old and above
TV-MA : 17 years old and above
You also need “Update” procedure to update
rating information.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN 20
NOTE:
NOTE:
• You can only download the additional V-Chip rating
system when your TV is receiving a digital signal.
• When you download the additional rating system, it
may take some time for the download to occur.
• The V-Chip rating information and system are not
determined or controlled by the TV.
• If the program or video you selected is not closed-
captioned, no captions will display on-screen.
• If text is not available in your viewing area, a black
rectangle may appear on-screen. If this happens,
set the CC Setting to “Off”.
• When selecting Closed Captions, the captioning will
be delayed approx. 10 seconds.
• The standard V-Chip rating system is available
whether your TV is receiving a digital signal or not,
and will block both analog and digital programs. To
set the restriction level using the standard V-Chip
rating system, select V-Chip Set in step 2.
• The downloadable V-Chip rating system is an
evolving technology, and availability, content, and
format may vary.
•
If no caption signal is received, no captions will appear,
but the television will remain in the Caption mode.
• Misspellings or unusual characters may
occasionally appear during Closed Captioning.
This is normal with Closed Captioning, especially
with live programs. This is because during live
programs, captions are also entered live. These
transmissions do not allow time for editing.
• When Captions are being displayed, on-screen
displays, such as volume may be seen but may
interfere with Closed Captions.
• You cannot select this feature if the TV is not
receiving a digital signal for the current station.
To clear the all V-Chip settings
• Some cable systems and copy protection systems
may interfere with the Closed Captioned signal.
• If using an indoor antenna or if TV reception is very
poor, the closed caption decoder may not appear or
may appear with strange characters or misspelled
words. In this case, adjust the antenna for better
reception or use an outdoor antenna.
In the V-Chip menu, press ▲ or ▼ to select
1
“V-Chip Clear”, then press ▶ or ENTER.
The V-Chip Clear screen will appear.
Use Number buttons (0-9) to enter your
2
password, then press ENTER. All of your settings
return to the factory settings.
• Closed Caption menu also can be displayed by
pressing CCD on the remote control.
Closed Caption
CC advanced
WHAT IS CLOSED CAPTIONING?
This television has the capability to decode and
display Closed Captioned television programs.
Closed Captioning will display text on the screen
for hearing impaired viewers or it will translate and
display text in another language.
When you have selected “Custom” as the display
method, you can adjust the various setting listed
below as follows:
This feature is designed to customize Digital Caption
only.
Captions: This Closed Caption mode will display
text on the screen in English or another language.
Generally, Closed Captions in English are transmitted
on C1 and Closed Captions in other languages are
transmitted on C2.
Select “Setup ⇒ Closed Caption”, then press ▶ or
1
ENTER.
Press ◀ or ▶ to set “CC Setting” to “On”.
2
Press ▲ or ▼ to select “Digital CC Preset”, then
press ◀ or ▶ to select “Custom”.
3
4
Text: The Text Closed Caption mode will usually fill
1/2 of the screen with a programming schedule or
other information.
Press ▲ or ▼ to select “CC Advanced”, then
press ▶ or ENTER.
Select “Setup ⇒ Closed Caption”, then press ▶ or
The CC Advanced menu will appear.
1
2
ENTER.
Press ▲ or ▼ to select the desired item, then
press ◀ or ▶ to change the setting.
5
Press ◀ or ▶ to set “CC Setting” to “On”.
On: Captions will be displayed on the screen.
Off: Captions will not be displayed on the screen.
CC Advanced
Press ▲ or ▼ to select “Analog Caption” or “Digital
3
Text Size
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Caption”.
Text Type
Text Edge
When you select “Analog Caption”, you can
Text Color
choose from C1, C2, C3, C4, T1, T2, T3 and T4.
Text Opacity
Background Color
Background Opacity
When you select “Digital Caption”, you can
choose from CS1, CS2, CS3, CS4, CS5 and CS6.
Press ◀ or ▶ to select the desired Closed
4
Caption mode for both Digital and Analog Caption.
Press ▲ or ▼ to select “CC Priority”, then press
5
◀ or ▶ to select “Digital CC” or “Analog CC”.
NOTE:
• Depending on the broadcast signal, some
Analog Captions will function with a Digital
broadcast signal. This step prevent that two
kind of captions are overlapping.
Download from Www.Somanuals.com. All Manuals Search And Download.
21 EN
You can select from among the following items
and parameters.
Cinema Wide1 (for 4:3 format programs)
To fill the screen, the right and left edges are
extended, however; the center of the picture remains
near its former ratio.
Text Size:
Text Type:
Auto, Small, Standard, Large
Auto, Style1, Style2, Style3, Style4,
The top and bottom edges of the picture may be hidden.
Style5, Style6, Style7
Text Edge: Auto, None, Raised, Depressed,
Uniform, Left Shadow, Right
Shadow
Text Color: Auto, Black, White, Red, Green,
Blue, Yellow, Magenta, Cyan
Text Opacity: Auto, Solid, Transparent,
Cinema Wide2 (for letter box programs)
The entire picture is uniformly enlarged—it is
stretched the same amount both wider and taller
(retains its original proportion).
Translucent, Flashing
Background Auto, Black, White, Red, Green,
Color:
Blue, Yellow, Magenta, Cyan
Background Auto, Solid, Transparent,
The top and bottom edges of the picture may be hidden.
Opacity: Translucent, Flashing
NOTE:
• You cannot set both “Text Color” and “Background
Color” as a same color.
• You cannot set both “Text Opacity” and “Background
Opacity” to “Transparent”.
Cinema Wide3 (for letter box programs with
subtitles)
Setting the picture size
To fill the width of the screen, it is extended
horizontally. However; it is only slightly extended at the
top and the bottom.
You can change to a variety of picture sizes—
Natural, Cinema Wide1, Cinema Wide2, Cinema
Wide3, Full and Native.
The top and bottom edges of the picture may be hidden.
Selecting the picture size
Select “Picture ⇒ Picture Size”, then press ▶ or
1
2
ENTER to display “Picture Size” menu
.
A B C D E F G - - - - - - - - - - - - - - - -
A B C D E F G - - - - - - - - - - - - - - - - - - - - - - - - - -
Full (for 16:9 source programs)
Full will display the picture at the maximum size.
Press ▲ or ▼ or corresponding Number buttons
(0-4) to select the desired picture size, as described
below.
Picture Size
0.Natural
1.Cinema Wide1
2.Cinema Wide2
3.Cinema Wide3
4.Full
Native (for PC mode only)
Detects the resolution of the signal of the image and it
will be shown on the screen with same amount of pixels.
NOTE:
• Selectable picture sizes may vary depending on the
input source or broadcast signal.
NOTE:
• Some High Definition and/or Digital broadcasts may
not allow you to change the picture size.
• In HDMI or COMPONENT mode with a scanning
rate of 720p, 1080i or 1080p (HDMI only) only the
Cinema Wide2 and Full picture size feature are
available.
• Picture Size menu also can be displayed by
pressing SCREEN SIZE on the remote control.
Natural
In some cases, this image will display the size of
standard 4:3 with a black side bar.
• In PC mode, only the Natural, Full and Native
picture size features are available. In PC mode
(WXGA), only the Full and Native picture size
features are available.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN 22
On the screen, “ ” changes to “Loading” and then
playback will commence.
DVD Operation
3
4
• A menu screen may appear on the TV screen,
if the disc has a menu feature. In this case,
press ▲, ▼, ◀, ▶ or ENTER to operate a menu
feature.
The following pages describe the setup/
operation in DVD mode.
Preparation
Before DVD/CD operation, please make the following
preparations.
( )
to end playback.
Press STOP
•
The unit can record where you stop a video, but it
depends on the disc you are using. Press PLAY
Insert the AC cord plug into a standard 120V
1
(
)
to resume a playback point.The unit can
60Hz polarized AC outlet.
store the stopped points of the last five discs
that you have played.When one of these discs is
reloaded, you can resume playback from where
you stopped playing last time.
• If the AC cord plug is plugged in for the first
time, wait for about 5 seconds before pressing
POWER.
NOTE:
( )
again (“Resume off”
•
•
If you press STOP
• When connecting to other equipment, unplug
the unit from the AC outlet.
appears on the screen) the unit will clear the
stopped point.
You cannot save a stopped point for some discs.
If a number of discs played and stored in the unit
exceeds five, a new memory will overwrite the
oldest stored memory.
2
Press POWER on the unit or on the remote
control to turn on the unit. The POWER indicator
will change to green.
•
Each time you turn the unit ON, the TV/DVD
starts from the TV mode.
Press (EJECT).
5
Remove the disc and then press POWER.
The unit turns off.
•
When using an amplifier, switch on the amplifier.
Press TV/DVD to select DVD mode.
3
• When you eject the disc, you may hear some
mechanism noise, but it is not a malfunction.
The DVD startup screen will appear on the screen.
• If the DVD is not operated, the unit will
automatically shut itself off after 15 minutes.
NOTE:
• If a non-compatible disc is loaded, “Can’t play disc”
or “Incompatible disc region number Can’t play
disc” will appear on the TV screen according to the
type of loaded disc. In this case, check your disc
again (see page 9).
• Some discs may take a minute or so to start
playback.
• A prohibition message “Depending on the disc, this
operation may be prohibited” or “This operation
can’t be performed” may appear on the screen.
This message means either the feature you tried is
not available on the disc, or the unit cannot access
the feature at this time. This does not indicate a
problem with the unit.
NOTE:
• If the unit does not operate properly:
Static electricity, etc., may affect the player’s
operation. Disconnect the AC power cord once,
then connect it again.
• About inserting disc:
If the unit is slanted or moved while inserting a disc,
the disc may be damaged.
• When you insert a single-faced disc label backwards
(i.e. the wrong way) “Loading” will appear on the
display and then “Can’t play disc” will be displayed.
• Some playback operations of DVDs may be
intentionally fixed by software producers. Since
this unit plays DVDs according to the disc content
recorded, some playback features may not be
available. Also refer to the instructions supplied with
the DVDs.
Status display of disc
Press DISPLAY. The status display of the disc will
appear on the screen.
• Display messages may change each time you press
DISPLAY for some discs or files.
To make the status display screen disappear, press
DISPLAY again.
Playback procedure
Press TV/DVD to select DVD mode.
1
Place the disc in the
2
disc slot with the label
side facing forward. (If
the disc has a label.)
Hold the disc without
touching either of its
surfaces, align it with
the guides, and place it
in position.
Download from Www.Somanuals.com. All Manuals Search And Download.
23 EN
In the zoom mode, press ZOOM repeatedly to
Special playback
3
return to a 1:1 view.
Fast Forward Playback
Press SEARCH (uu ) during normal playback.
Each press of SEARCH (uu ) will increase the speed of
the search.
NOTE:
• You can select the Still Playback or Fast Forward
(Review) Playback in the zoom mode.
(
)
.
• To resume normal playback, press PLAY
• Some discs may not respond to the zoom feature.
Review Playback
Locating desired scene
Press SEARCH (tt ) during normal playback.
Each press of SEARCH (tt ) will increase the speed of
the search.
Use the title, chapter and time recorded on the disc to
locate the desired point to playback.
(
)
.
• To resume normal playback, press PLAY
Still Playback
Press JUMP during playback.
1
( )
Press PAUSE/STILL
during normal playback to
pause playback.
Press ▲ or ▼ to select the “Title Search”, “Chapter
2
(
)
• To resume normal playback, press PLAY
or
Search”, “Time Search” or “Track Search”. Then
( )
PAUSE/STILL
.
press ▶ or ENTER.
Frame Advance
( )
Press Number buttons (0–9) to input the number.
3
Press PAUSE/STILL
during normal playback.
One frame is advanced each time you press SEARCH
• If you input a wrong number, press CANCEL.
• Refer to the package supplied with the disc to
check the numbers.
(tt ) or SEARCH (uu ).
(
)
.
• To resume normal playback, press PLAY
Slow-motion Playback
Press ENTER.
• Playback starts.
4
(
)
(
)
Press SLOW
or SLOW
during normal
playback or still playback.
• When you change the title, playback starts from
Chapter 1 of the selected title.
• Some discs may not work in the above
operation.
Each press of SLOW will change the speed of the
slow.
(
)
.
• To resume normal playback, press PLAY
(
)
.
•
To resume the still playback, press PAUSE/STILL
Locating a chapter or track
(
)
(
)
Press SKIP
Forward or SKIP
Reverse
A-B Repeat playback
during playback to locate a chapter/track that you want to
watch.
A-B repeat playback allows you to repeat material
between two selected points.
Each time you press the button, a chapter or track is
skipped.
Press REPEAT A-B during playback.
The start point is selected.
1
NOTE:
• The TV/DVD is capable of holding a still video image
or On screen display image on your television screen
indefinitely. If you leave the still video image or On
screen display image displayed on your TV for an
extended period of time, you risk permanent damage
to your television screen.
Press REPEAT A-B again.
2
The end point is selected.
Playback starts at the point that you selected.
Playback stops at the end point, returns to Point A
automatically, then starts again.
• To resume normal playback press REPEAT A-B
Zooming
again.
This TV/DVD will allow you to zoom in on the frame
image. You can then make selections by switching the
position of the frame.
NOTE:
• In A-B Repeat mode, subtitles near the A or B
locations may not be displayed.
• You may not be able to set A-B Repeat during
certain scenes of the DVD.
Press ZOOM during playback.
1
The center part of the image will be zoomed in.
Each press of ZOOM will change the Zoom
magnification Zoom 2× and Zoom 4×.
• A-B Repeat does not work with an interactive DVD,
MP3/WMA/JPEG-CD.
Press ▲/▼/◀/▶ to view a different part of the
2
frame.
You may move the frame from the center position
UP, DOWN, LEFT or RIGHT.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN 24
Marking desired scenes Changing soundtrack
The TV/DVD stores the points that you want to watch
language
again up to 12 points.
You can select the language when you play a
multilingual disc.
You can resume playback from each scene.
Marking the scenes
Press AUDIO during playback.
1
Press MARKER during playback.
1
The current soundtrack language will appear.
Current/Total
Select the blank Marker using ▲/▼/◀/▶, then
2
Audio
1/2
English
Dolby Digital 2/0CH
press ENTER at the desired scene.
• Up to 12 scenes can be selected.
• Repeat this procedure to set the other 11
scenes.
Press AUDIO repeatedly until the desired
language is selected.
The on-screen display will disappear after a few
seconds.
2
Press MARKER to return to the normal screen.
3
Returning to the scenes
Current/Total
Press MARKER during playback or stop mode.
1
Audio
2/2
French
Dolby Digital 2/0CH
Press ▲/▼/◀/▶ to select the Marker 1-12.
2
Press ENTER.
Playback starts from the marked scene.
3
NOTE:
• If the desired language is not heard after pressing
AUDIO several times, the language is not recorded
on the disc.
To cancel the Marker
Follow the above steps 1~2, then press CANCEL.
• Changing soundtrack language is cancelled after
“Resume off” has been selected.
NOTE:
• The initial default language or available language
will be heard if the disc is played back again.
• Some discs may not work with the marking
operation.
• The marking is cancelled when you eject the disc or
turn the power off.
Subtitles
• Some subtitles recorded around the marker may fail
to appear.
Changing the subtitle language
You can select the language when playing back a disc
recorded with multilingual subtitles.
Changing angles
Press SUBTITLE repeatedly during playback until
When playing back a disc recorded with multi-angle
facility, you can change the view angle.
1
your desired language appears.
The on-screen display will disappear after a few
seconds.
Press ANGLE during playback.
The current angle will appear.
1
Current/Total
Subtitle 1/2
English
Current/Total
Angle
1/2
Turning the subtitles off
Press SUBTITLE during playback until “Off” appears.
Press ANGLE repeatedly until the desired angle is
2
selected.
NOTE:
• Changing subtitle language is cancelled after
NOTE:
“Resume off” has been selected.
• Some functions may not work on some DVDs. You
may not be able to turn subtitles on or off or change
subtitles.
• In case of JPEG-playback, the JPEG-image is
rotated 90 degrees to the right.
• Depending on the DVD, you may not be able
to change the angles even if multi-angles are
recorded on the DVD.
While playing the DVD, the subtitle may change
when:
- you eject or insert the disc.
- you change the title.
• In some cases, the subtitle language is not changed
to the selected one immediately.
Download from Www.Somanuals.com. All Manuals Search And Download.
25 EN
Using HOME MENU
Play mode
A-B repeat playback allows you to repeat a selection
between two selected points.
A-B repeat playback
Playing a disc
Press SETUP during stop mode.
HOME MENU will appear.
1
Play Mode
Press PLAY MODE
1
HOME MENU
Press ▲/▼/◀/▶
to select “Disc
Navigator”, then
DVD
2
during playback.
Play Mode screen
will appear.
A-B Repeat
Repeat
A(Start Point)
B(End Point)
Off
Audio Settings
Play Mode
Video Adjust
Random
Program
Search Mode
Disc Navigator
press ENTER
.
Initial Settings
Press ▲/▼ to select “A-B Repeat”, then press ▶ or
2
3
4
Disc Navigator
Title
Chapter
Press ▲/▼ to select
desired option, then
press ENTER.
3
ENTER.
Press ▲/▼ to select “A(Start Point)”, then press
ENTER. The start point is selected.
• Disc Navigator may not work with some discs.
• Depending on a disc, you can select Title,
Chapter, or both.
Press ▲/▼ to select “B(End Point)”, then press
ENTER.
The end point is selected. Playback starts at the
point that you selected. Playback stops at the end
point and returns to Point A automatically, then
starts again.
Press ▲/▼/◀/▶ or Number Buttons (0–9) to
select Title or Chapter, then press ENTER.
• Press SKIP ( ) or SKIP ( ) to move to the
next/previous page.
4
To resume normal playback
Select “Off” in step 3.
• Press RETURN to return to the previous screen.
NOTE:
Playing a file
• Some discs may not work with the Play Mode function.
• A-B Repeat playback does not work with MP3/WMA
CD’s.
Press SETUP during stop mode.
1
2
3
HOME MENU will appear.
Repeat playback
Press ▲/▼/◀/▶ to select “Disc Navigator”, then
press ENTER.
Press PLAY MODE during playback.
1
Play Mode screen will appear.
00:00/ 00:00
0kbps
Press ▲/▼ to select
folder, then press
ENTER.
Press ▲/▼ to select “Repeat”, then press
▶
or
2
3
Folder1
Folder2
Folder3
Folder4
ENTER
.
Press ▲/▼ to select desired repeat option, then
press ENTER.
The unit automatically starts repeat playback after
finishing the current title or chapter.
Press ▲/▼ to select file, then press ENTER.
• If you select a JPEG file, the unit shows the
pictures one after another automatically.
• Press RETURN to go to the previous step.
4
To resume normal playback
Select “Repeat Off” in step 3.
Random playback
NOTE:
Press PLAY MODE during playback or stop mode.
1
2
3
Play Mode screen will appear.
• When music files and JPEG files are recorded
on one disc, you can play them simultaneously.
Please select the music file then select the
JPEG file.
Press ▲/▼ to select “Random”, then press
▶
or
ENTER
.
Press ▲/▼ to select desired random playback
option, then press ENTER.
The unit automatically starts random playback.
To resume normal playback
Select “Random Off” in step 3.
NOTE:
•
You cannot play Random playback for programmed
contents (Random play is not permitted during
Program playback).
•
•
During Random playback the same title, chapter or
track may be repeated.
Random playback does not work with MP3/WMA CD’s.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN 26
Program playback
Play Mode
Input Title, Chapter,
Track or Folder number
or Time by using
Number buttons
(0–9) and press
ENTER.
4
Press PLAY MODE during playback or stop mode.
Play Mode screen will appear.
A-B Repeat
Title Search
1
Input Chapter
Repeat
Chapter Search
Time Search
Random
0
0
1
Program
Search Mode
Press ▲/▼ to select “Program”, then press or
ENTER.
2
Press ▲/▼ to select
3
Program
Current
Title:02 Chapter:001
Chapter 1-004
• For instance, if you want to enter 1hr 4min
(64:00), input 6, 4, 0, 0.
NOTE:
Program Step
Title 1-38
“Create/Edit”, then
press ENTER.
01. 01
02.
Title 01
Title 02
Title 03
Title 04
Title 05
Title 06
Title 07
Title 08
Chapter 001
Chapter 002
Chapter 003
Chapter 004
03.
04.
“Create/Edit” display
differs, depending on
discs or files.
05.
06.
• You can locate a desired scene in the Menu
07.
08.
screen for some DVD videos.
• In stop mode, you can also enter the Play Mode
screen by selecting “Play Mode” in HOME
MENU.
Press ▲/▼/◀/▶ to select Title, Chapter, Track or
File, then press ENTER.
• When you add a program, find where you
want to add it (Program Step) and select Title,
Chapter, Track or File then press ENTER. (It will
be added to the left if File is added.)
• To go to previous step, press RETURN.
• If RETURN is pressed while programming, the
content will be deleted.
• To delete a program, select Program Step that
you want to delete and press CANCEL.
4
5
Audio Settings menu
The Audio Settings menu offers features for adjusting
the way discs sound.
Press SETUP during stop mode.
HOME MENU will appear.
1
HOME MENU
Press ▲/▼/◀/▶
to select “Audio
Settings”, then press
ENTER.
DVD
2
3
4
Audio Settings
Play Mode
Video Adjust
Press PLAY ( ).
• To play existing programmed contents, select
“Playback Start” from Play Mode screen and
press ENTER.
Disc Navigator
Initial Settings
Audio Settings
• To resume normal playback, select “Playback
Stop” in Play Mode screen and press ENTER.
Your programmed contents are saved.
• To delete all programmed contents, select
“Program Delete” in Play Mode screen and
press ENTER.
Press ▲/▼/◀/▶ to
setting the option,
then press ENTER.
Equalizer
Audio DRC
Dialog
Off
Rock
Pop
Live
Dance
Techno
Classic
Soft
Press SETUP to save the setting.
NOTE:
Equalizer
•
•
•
You can repeat the programmed contents. Select
“Program Repeat” from “Repeat” in the Play Mode
screen during Program playback.
Select the most suitable setting to match a
category of music that you are listening to.
You cannot play Random playback for programmed
contents (Random play is not permitted during
Program playback).
Audio DRC
• Adjusts loud sound levels down and quiet
sound levels up while playing. This is useful,
for instance, when you watch a film in the late
night.
In stop mode, you can also enter Play Mode
screen by selecting “Play Mode” in HOME MENU.
• Audio DRC only works with Dolby Digital
Sound.
Locating desired scene
• The effect depends on your AV amplifier and
speaker volume. Adjust the sound as you wish
and find the most effective setting.
Press PLAY MODE during playback or stop mode.
Play Mode screen will appear.
1
Press ▲/▼ to select “Search Mode”, then press ▶
2
3
Dialog
or ENTER.
Adjusts the audio setting when you cannot hear
dialogs very well.
Press ▲/▼ to select desired search mode option,
then press ▶ or ENTER.
NOTE:
• Search Mode options differs, depending on
discs or files.
• It may not be very effective for some discs or
files.
Download from Www.Somanuals.com. All Manuals Search And Download.
27 EN
Video Adjust menu
Quick guide for DVD menu
operation
From the Video Adjust menu you can adjust various
settings that affect how the picture is presented.
You can change the default settings to customize
performance to your preference.
Press SETUP during stop mode.
HOME MENU will appear.
1
Setting procedure
HOME MENU
Press ▲/▼/◀/▶ to
select “Video Adjust”,
then press ENTER.
DVD
2
Press SETUP in stop mode.
HOME MENU will appear.
1
Audio Settings
Play Mode
Video Adjust
Disc Navigator
HOME MENU
Initial Settings
Press ▲/▼/◀/▶ to
select “Initial Settings”,
then press ENTER.
DVD
2
Audio Settings
Play Mode
Video Adjust
Video Adjust
Sharpness
Brightness
Contrast
Gamma
Press ▲/▼/◀/▶ to
setting the option,
then press ENTER.
3
Disc Navigator
Fine
Standard
Soft
Initial Settings
Hue
Chroma Level
Press ▲/▼/◀/▶ to select the desired option, then
3
4
press ENTER.
Change the selection using ▲/▼/◀/▶ or ENTER,
by referring to the corresponding page 29.
• Repeat steps 3 and 4 to change other options.
Press SETUP to save the setting.
4
Sharpness
Adjust sharpness of images.
To clear HOME MENU screen, press SETUP.
5
Brightness
Adjust brightness of images.
Contrast
Adjust a ratio of brightness between the brightest part
and the darkest part.
Gamma
Emphasizes the dark part of images.
Hue
Adjusts the balance between green and red.
Chroma Level
Adjusts color density. It is effective with animation or
something with high color density.
NOTE:
• It may not be very effective for some discs or files.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN 28
Function Setup
Setting
Option
Digital Audio Out settings
Digital Out
On
Digital audio is output when playing a disc.
Digital audio is not output when playing a disc.
Off
Dolby Digital Out
Dolby Digital
Dolby Digital encoded digital audio is output when playing a
Dolby Digital DVD disc.
Dolby Digital > PCM
DTS
Dolby Digital audio is converted to PCM audio before being
output.
DTS encoded digital audio is output when playing a DTS disc.
(Noise will be output if your amplifier/receiver is not compatible
with DTS audio.)
DTS Out
Off
DTS encoded digital audio is not output when playing a DTS
disc.
96kHz PCM Out
MPEG Out
96kHz > 48kHz
96kHz
MPEG
96 kHz digital audio is converted to 48 kHz for digital output.
96 kHz digital audio is output as is at 96 kHz.
MPEG encoded digital audio is output as is.
MPEG > PCM
MPEG encoded digital audio is converted to PCM audio for
digital output.
Video Output settings
TV Screen 4:3 (Letter Box)
Set Picture Size to Natural. Widescreen movies are shown with
black bars top and bottom.
4:3 (Pan & Scan)
Set Picture Size to Natural. Widescreen movies are shown with
the sides cropped so that the image fills the screen.
16:9 (Wide)
Set if you have a widescreen TV.
Language settings
Audio Language
English/French/Spanish If there is an English, French or Spanish soundtrack on the
disc, then it will be played.
Other Language
Select to choose a language other than the ones displayed.
(See “Language Code List” on page 31.)
Subtitle Language English/French/Spanish If there is an English, French or Spanish subtitle on the disc,
then it will be displayed.
Other Language
Select to choose a language other than the ones displayed. (see
“Language Code List” on page 31.)
DVD Menu Lang.
w/Subtitle Lang.
DVD disc menus will be displayed in the same language as
your selected subtitle language, if possible.
English/French/Spanish If there is an English, French or Spanish DVD menu language
on the disc, then it will be displayed.
Other Language
Select to choose a language other than the ones displayed. (see
“Language Code List” on page 31.)
Subtitle Display
On
Off
Subtitles are displayed according to your selected subtitle
language (see above).
Subtitles are always off by default when you play a DVD disc
(note that some discs override this setting).
Display settings
Angle Indicator
On
Off
A camera icon is displayed on-screen during multi-angle
scenes on a DVD disc.
No multi-angle indication is shown.
Options settings
Parental Lock
See page 30.
Download from Www.Somanuals.com. All Manuals Search And Download.
29 EN
Level Change
Parental Control
Initial Settings
Press
▲
or
▼
to select
1
Some discs are specified as not suitable for children.
Such discs can be limited not to playback with the
unit.
Digital Audio Out
Video Output
Language
Parental Lock
Password Change
Level Change
Country Code
“Level Change”, then
Display
press ENTER.
Options
How to into the Parental Lock menu
Initial Settings
Press Number
buttons (0–9) to
input the current
password, then press
ENTER.
2
Digital Audio Out
Video Output
Language
Parental Lock: Level Change
Password
Press SETUP in stop mode.
HOME MENU will appear.
1
Display
Options
1
2
3
4
5
6
7
8
Off
HOME MENU
Press ▲/▼/◀/▶
to select “Initial
Settings”, then press
ENTER.
DVD
2
Audio Settings
Play Mode
Video Adjust
Initial Settings
Disc Navigator
Press
◀
or
▶
to
3
Digital Audio Out
Video Output
Language
Parental Lock: Level Change
Password
select from the level
1 to level 8.
Initial Settings
Display
Options
1
2
3
4
5
6
7
8
Off
The limitation will be
more severe as the
level number is lower.
Then press ENTER.
Press ▲/▼ to select “Options”, then press ▶ or
3
ENTER
.
Then press ▶ or ENTER to enter the Parental
Lock menu.
Level 1: DVD software for adults cannot be
played back.
Set Password
Level 8: Virtually all DVD software can be
played back.
Initial Settings
1
Press
▲
or
▼
to
Digital Audio Out
Video Output
Language
Display
Options
Parental Lock
Password
Level Change
Country Code
Level Off: The parental control setting does not
select “Password”,
function.
then press ENTER.
Country Code
Initial Settings
Initial Settings
Press
▲
or
▼
to select
1
2
Press Number
Digital Audio Out
Video Output
Language
Parental Lock
Password Change
Level Change
Country Code
Digital Audio Out
Video Output
Language
Display
Options
Parental Lock: Register Code Number
“Country Code”, then
buttons (0–9) to
input the password,
then press ENTER.
Display
press ENTER.
Options
Initial Settings
Press Number
buttons (0–9) to
input the current
password, then press
ENTER.
2
Change Password
Digital Audio Out
Video Output
Language
Parental Lock: Change Country Code
Password
Initial Settings
Country Code List
us
Code
Display
Press
▲
or
▼
to
1
Options
2
1
1
9
Digital Audio Out
Video Output
Language
Parental Lock
Password Change
Level Change
Country Code
select “Password
Change”, then press
ENTER.
Display
Options
Initial Settings
Press
▲
or
▼
to
3
Digital Audio Out
Video Output
Language
Parental Lock: Change Country Code
Password
select the input mode
from “Country Code
List” or “Code”.
Initial Settings
Country Code List
us
Code
Press Number
buttons (0–9) to
input the current
password, then press
ENTER.
Display
2
Options
Digital Audio Out
Video Output
Language
Parental Lock: Password Change
Password
2
1
1
9
New Password
Display
Options
• When you selected “Country Code List”: Press
▲ or ▼ to select “Country Code”, then press
ENTER.
Initial Settings
• When you selected “Code”: Press ▶ then use
the Number buttons (0-9) to enter the 4-digit
“Country Code”, then press ENTER. (see
Country/Area Code List on page 31)
Press Number
buttons (0–9)
to input the new
password. Press
ENTER. Now your
new password has
been set. Be sure
to remember this
number!
3
Digital Audio Out
Video Output
Language
Parental Lock: Password Change
Password
New Password
Display
Options
NOTE:
• Depending on the discs, the unit cannot limit
playback.
• Some discs may not be encoded with specific
rating level information though its disc jacket
says “adult”. For those discs, the age restriction
will not work.
• If you input a wrong number, press ◀, then input
correct number.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN 30
Language Code List
Language (Language code letter), Language code
Japanese (ja), 1001
English (en), 0514
French (fr), 0618
Bhutani (dz), 0426
Esperanto (eo), 0515
Estonian (et), 0520
Basque (eu), 0521
Persian (fa), 0601
Finnish (fi), 0609
Kirghiz (ky), 1125
Sinhalese (si), 1909
Slovak (sk), 1911
Slovenian (sl), 1912
Samoan (sm), 1913
Shona (sn), 1914
Somali (so), 1915
Albanian (sq), 1917
Serbian (sr), 1918
Siswati (ss), 1919
Sesotho (st), 1920
Sundanese (su), 1921
Swahili (sw), 1923
Tamil (ta), 2001
Latin (la), 1201
Lingala (ln), 1214
German (de), 0405
Italian (it), 0920
Laothian (lo), 1215
Lithuanian (lt), 1220
Latvian (lv), 1222
Spanish (es), 0519
Chinese (zh), 2608
Dutch (nl), 1412
Fiji (fj), 0610
Malagasy (mg), 1307
Maori (mi), 1309
Faroese (fo), 0615
Frisian (fy), 0625
Irish (ga), 0701
Portuguese (pt), 1620
Swedish (sv), 1922
Russian (ru), 1821
Korean (ko), 1115
Greek (el), 0512
Macedonian (mk), 1311
Malayalam (ml), 1312
Mongolian (mn), 1314
Moldavian (mo), 1315
Marathi (mr), 1318
Malay (ms), 1319
Scots-Gaelic (gd), 0704
Galician (gl), 0712
Guarani (gn), 0714
Gujarati (gu), 0721
Hausa (ha), 0801
Hindi (hi), 0809
Afar (aa), 0101
Telugu (te), 2005
Tajik (tg), 2007
Abkhazian (ab), 0102
Afrikaans (af), 0106
Amharic (am), 0113
Arabic (ar), 0118
Maltese (mt), 1320
Burmese (my), 1325
Nauru (na), 1401
Thai (th), 2008
Croatian (hr), 0818
Hungarian (hu), 0821
Armenian (hy), 0825
Interlingua (ia), 0901
Interlingue (ie), 0905
Inupiak (ik), 0911
Tigrinya (ti), 2009
Turkmen (tk), 2011
Tagalog (tl), 2012
Setswana (tn), 2014
Tonga (to), 2015
Turkish (tr), 2018
Tsonga (ts), 2019
Tatar (tt), 2020
Nepali (ne), 1405
Assamese (as), 0119
Aymara (ay), 0125
Azerbaijani (az), 0126
Bashkir (ba), 0201
Norwegian (no), 1415
Occitan (oc), 1503
Oromo (om), 1513
Oriya (or), 1518
Byelorussian (be), 0205 Indonesian (in), 0914
Panjabi (pa), 1601
Polish (pl), 1612
Bulgarian (bg), 0207
Bihari (bh), 0208
Bislama (bi), 0209
Bengali (bn), 0214
Tibetan (bo), 0215
Breton (br), 0218
Catalan (ca), 0301
Corsican (co), 0315
Czech (cs), 0319
Welsh (cy), 0325
Danish (da), 0401
Icelandic (is), 0919
Hebrew (iw), 0923
Yiddish (ji), 1009
Pashto, Pushto (ps), 1619
Quechua (qu), 1721
Rhaeto-Romance (rm), 1813
Kirundi (rn), 1814
Twi (tw), 2023
Ukrainian (uk), 2111
Urdu (ur), 2118
Javanese (jw), 1023
Georgian (ka), 1101
Kazakh (kk), 1111
Greenlandic (kl), 1112
Cambodian (km), 1113
Kannada (kn), 1114
Kashmiri (ks), 1119
Kurdish (ku), 1121
Uzbek (uz), 2126
Vietnamese (vi), 2209
Volapük (vo), 2215
Wolof (wo), 2315
Xhosa (xh), 2408
Yoruba (yo), 2515
Zulu (zu), 2621
Romanian (ro), 1815
Kinyarwanda (rw), 1823
Sanskrit (sa), 1901
Sindhi (sd), 1904
Sangho (sg), 1907
Serbo-Croatian (sh), 1908
Country/Area Code List
Country/Area, Country/Area code, Country/Area code letter
Argentina, 0118, ar
Australia, 0121, au
Austria, 0120, at
Belgium, 0205, be
Brazil, 0218, br
Finland, 0609, fi
France, 0618, fr
Malaysia, 1325, my
Mexico, 1324, mx
Singapore, 1907, sg
Spain, 0519, es
Germany, 0405, de
Hong Kong, 0811, hk
India, 0914, in
Netherlands, 1412, nl
New Zealand, 1426, nz
Norway, 1415, no
Sweden, 1905, se
Switzerland, 0308, ch
Taiwan, 2023, tw
Thailand, 2008, th
United Kingdom, 0702, gb
USA, 2119, us
Canada, 0301, ca
Chile, 0312, cl
Indonesia, 0904, id
Italy, 0920, it
Pakistan, 1611, pk
Philippines, 1608, ph
Portugal, 1620, pt
China, 0314, cn
Denmark, 0411, dk
Japan, 1016, jp
Republic of Korea, 1118, kr
Russian Federation, 1821, ru
Download from Www.Somanuals.com. All Manuals Search And Download.
31 EN
Connections to other equipment
The exact arrangement you use to interconnect various video and audio components to this unit is dependent
on the model and features of each component. Check the Owner’s Manual provided with each component for
the location of video and audio inputs and outputs.
To connect the LCD TV/DVD to a VCR
VCR
To VIDEO/AUDIO IN
To Video/Audio OUT
Rear of the unit
Video/Audio cord (not supplied)
To connect the LCD TV/DVD to a DVD player with Component Video Input
You can enjoy a high quality picture by connecting the unit’s COMPONENT VIDEO OUT jacks of your DVD
player with the component video cables (not supplied).
Rear of the unit
To AUDIO IN
To Audio OUT
Audio cord
(not supplied)
DVD
Y
Pb
Pr
Pr
Pb
Y
Component video cord
(not supplied)
To COMPONENT IN
(Y,Pb,Pr)
To Component OUT
NOTE:
• Component Video input of the unit are for use with a device which output 480i/1080i interlaced signals and
480p/720p progressive signals.
To connect the LCD TV/DVD to a camcorder, or a game console
To playback from a camcorder, connect the camcorder to the unit as shown.
This unit can also be used as a display device for many video games. However, due to the wide variety of
signals generated by these devices and subsequent hook-up variations required, they have not all been
included in the suggested connection diagrams.You’ll need to consult each component’s Owner’s Manual for
additional information.
Rear of the unit
To VIDEO/AUDIO IN
To Video/Audio OUT
GAME CONSOLE
or
Video/Audio cord (not supplied)
Download from Www.Somanuals.com. All Manuals Search And Download.
EN 32
Connections to other equipment
Using an AV Amplifier with built-in digital surround
If you are using an AV Amplifier with built-in digital surround sound, you can enjoy various audio systems including
Dolby Digital Surround audio that sounds just like the movie.
Connect an AV amplifier with built-in Dolby Digital decoder, DTS decoder, or MPEG decoder etc. as
shown below.
Rear of the unit
Front
Speaker
Subwoofer
(Right)
TV/DVD
Front
Speaker
(Left)
To COAXIAL OUT
Coaxial digital cable
(not supplied)
To Coaxial
Center Speaker
Digital Audio Input
Surround
Surround
Speaker (Left)
Speaker
(Right)
AV Amplifier with built-in digital surround decoder
NOTE:
• When you are viewing digital broadcast, this unit will not work in conjunction with DTS audio or MPEG audio.
There will be no sound output if connected to an AV amplifier with a built-in DTS decoder or MPEG decoder.
To connect the LCD TV/DVD to a PC (Personal Computer)
BEFORE YOU CONNECT THIS TV TO YOUR PC, CHANGE THE ADJUSTMENT OF YOUR PC’S
RESOLUTION AND REFRESH RATE (60 HZ).
Connect one end of a (male to male) VGA cable to the video cord of the computer and the other end to the VGA
connector PC MONITOR IN on the rear of the TV. Attach the connectors firmly with the screws on the plug. In case
of a Multimedia computer, connect the audio cord to the audio output of your Multimedia computer and to the
AUDIO IN connector of the AUDIO (L/R) IN jack of the TV.You can also connect the PC with HDMI cable. If you
use HDMI cable, you don’t have to connect the audio cord. If you use DVI-to-HDMI cable, please connect audio
cord as same way as VGA cable.
Press INPUT SELECT on the remote control to select PC mode.
Switch on the computer. The TV can operate as the computer monitor.
Rear of the unit
To AUDIO
(L/R) IN
Monitor Display modes
Mode Resolution Refresh rate
VGA
VGA
640x480 60/ 72/ 75 Hz
720x400 70Hz
SVGA 800x600 56/ 60/ 72/ 75 Hz
XGA 1024x768 60/ 70/ 75 Hz
WXGA 1280x768 60Hz
WXGA 1280x720 60Hz
WXGA 1360x768 60Hz
To HDMI/DVI IN
To PC
MONITOR
IN
To return to normal mode
HDMI cable (not supplied)
VGA cable (not supplied)
Audio cord (not supplied)
Press INPUT SELECT again.
NOTE:
• The on-screen displays will have a different appearance in PC mode than in TV mode.
• If there is no video signal from the PC when the unit is in PC mode, “No signal” will appear on the TV-screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
33 EN
Connections to other equipment
To connect a HDMI or a DVI device to the unit
The HDMI input receives digital audio and uncompressed video from a HDMI device or uncompressed digital
video from a DVI device.
When you connect to a DVI device with a HDMI-to-DVI adapter cable, it transfers only video signal. Separate
analog audio cords required.
To DVI output
Rear of the unit
Audio cord (not supplied)
To AUDIO (L/R) IN
HDMI - to - DVI adapter cable
(HDMI type A connector)
DVI device
(not supplied)
To HDMI/DVI IN
or
HDMI device
HDMI cable (type A connector)
(not supplied)
To HDMI output
NOTE:
• When using HDMI/DVI IN to connect your HDMI or DVI devices, you must select the corresponding
audio input source (HDMI or DVI) on the menu screen (see page 17). Otherwise you will only see the
image with no sound.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN 34
Reception disturbances
Most types of television interference can be remedied by adjusting the height and position of the VHF/UHF
antenna. Outdoor antennas are recommended for best results. The most common types of television
interference are shown below. If one of these symptoms appear when the TV is connected to a Cable TV
system, the disturbance may be caused by the local Cable TV company broadcast.
IGNITION
Black spots or horizontal streaks may appear, the picture may flutter or
drift. Usually caused by interference from automobile ignition systems,
neon lamps or AC powered tools and appliances such as drills or hair
dryers.
GHOSTS
Ghosts are caused by the television signal following two paths. One is the
direct path and the other is reflected by tall buildings, hills or other large
objects. Changing the direction or position of the antenna may improve
the reception.
SNOW
If the TV is located far from the TV station, in a fringe reception area where
the signal is weak, small dots may appear in the picture.
If the signal is extremely weak, the installation of a larger external antenna
may be necessary.
RADIO FREQUENCY INTERFERENCE (RFI)
Caused by two-way radios, this type of interference produces moving
ripples or diagonal streaks in the picture. Some cases may cause a loss of
contrast in the picture. Changing the direction and position of the antenna
or installing an RFI filter may improve the picture.
PICTURE SIZE VARIATION
A slight picture size variation is normal when you adjust the CONTRAST or
BRIGHTNESS settings.
CARE AND MAINTENANCE
To prevent fire or shock hazard, disconnect the TV from the power source before cleaning.
The finish on the cabinet may be cleaned with mild soap and a soft, damp cloth and cared for as other furniture.
Use caution when cleaning or wiping the plastic parts.
Download from Www.Somanuals.com. All Manuals Search And Download.
35 EN
Problems and troubleshooting
Use the following check list for troubleshooting when you have problems with your TV/DVD. Consult your local
dealer or service outlet if problems persist.
Be sure all connections are properly made when using with other units.
SYMPTOMS
POWER
POSSIBLE SOLUTIONS
PAGE
• Make sure the power cord is plugged in.
TV/DVD does not operate. • Power is off, check fuse or circuit breaker.
• Unplug unit, then plug it back in.
13
TV BROADCAST RECEPTION
• Station or Cable TV experiencing problems, tune to another station.
• Check Volume adjustments or muting.
• Check for sources of possible interference.
15
15, 16
35
15
14
35
17
Poor sound or no sound.
Poor picture or no picture.
•
Station or Cable TV experiencing problems, tune to another station.
• Check antenna or Cable TV connections, reorient antenna.
• Check for sources of possible interference.
• Check picture control adjustments.
• Station or Cable TV experiencing problems, tune to another station.
• Station signal is weak, reorient antenna to receive stronger station.
• Check for sources of possible interference.
15
14
35
Poor reception on some
channels.
•
Station or Cable TV experiencing problems, tune to another station.
15
18
17
14
35
• Make sure channels are set into memory.
• Check picture control adjustments.
Poor color or no color.
• Check antenna or Cable TV connections, reorient antenna.
• Check for sources of possible interference.
•
Station or Cable TV experiencing problems, tune to another station.
15
18
–
• Make sure channels are set into memory.
• Cable TV company is scrambling signal.
• Check antenna orientation.
Picture wobbles or drifts.
No Cable TV reception.
14
• Check all Cable TV connections.
14
18
15
• Set Signal Type option to the “Cable” mode.
• Station or Cable TV system problems, try another station.
Horizontal or diagonal
bars on screen.
• Check antenna connections, reorient antenna.
14
• Check for sources of possible interference.
35
No reception above
• Make sure Signal Type option is in the appropriate mode.
• If using antenna, check UHF antenna connections.
18
14
channel 13.
• No broadcast on station tuned.
15
16
–
TV shuts off.
• Sleep Timer is set.
• Power interrupted.
• TV station experiencing problems or program tuned is not closed
15
14
21
17
16
captioned. Try another channel.
Closed Caption is not
activated.
• Check Cable TV connection or VHF/UHF antenna, reposition or
rotate antenna.
• Set Closed Caption in the menu.
Display is not shown in
your language.
Cannot delete E-POP.
• Select proper language in the menu options.
• Set the “E-POP Demo” in the Auto Setup menu to “Off”.
REMOTE CONTROL
• Aim at the remote control at the remote sensor.
• Operate within approx. 15 feet or reduce the light in the room.
• Clear the path of the beam.
The remote control does
not function.
13
• The batteries are weak. Replace the batteries.
•
Check the batteries are inserted correctly.
• The LCD panel is a very high technology product, giving you fine picture details. Occasionally, a few non-
active pixels may appear on the screen as a fixed point of blue, green or red. Please note that this does not
affect the performance of your product.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN 36
Problems and troubleshooting
SYMPTOMS
POSSIBLE SOLUTIONS
PAGE
DVD
• No disc is inserted.
23
9
Playback doesn’t start or
disc ejects automatically.
• The disc may be dirty. Clean up the disc.
• The disc is scratched or warped.
• The unit cannot play CD-ROMs, etc.
9
9
No picture.
No sound.
• TV/DVD selector is not set correctly.
23
• Check the input selector of the amplifier is set properly.
• The unit is in the Special playback mode.
–
24
33
• Select the correct Audio Output position on AV amplifier.
Picture is distorted during
CUE or REVIEW.
Stopping playback,
search, slow-motion play,
repeat play, or program
play, etc. cannot be
performed.
• The picture will be distorted occasionally.
–
–
• Some discs may not allow some functions.
• The setup does not match your stereo system.
No surround sound.
33
13
The unit or remote
operation key is not
functioning.
• Turn off the unit and unplug the AC power cord for several minutes,
then replug it.
Playback does not start
when the title is selected.
Audio soundtrack and/or
subtitle language is not
changed when you play
back a DVD.
• Check the Parental Lock setup.
30
25
• Multilingual language is not recorded on the DVD disc.
• Some discs have no subtitles.
No subtitle.
25
25
• Subtitles are cleared. Press SUBTITLE.
Angle cannot be changed. • Multi-angles are not recorded on the DVD disc.
“This operation can’t be
performed” appears on the • The function is prohibited with the unit or the disc.
screen.
23
FCC Declaration of Conformity Compliance Statement (Part 15):
The Sansui SLEDVD249, LED-LCD HDTV with DVD player complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including interference
that may cause undesired operation.
The party responsible for compliance to these rules is:
ORION AMERICA,INC.
1105 SOUTH MAIN STREET PRINCETON, INDIANA 47670,U.S.A
Ph: 1-800-289-0980
Download from Www.Somanuals.com. All Manuals Search And Download.
37 EN
Specifications
GENERAL
Power supply:
AC 120V, 60Hz
Power consumption:
Operation: 42W
Stand by: 0.7W
Weight:
4.0 kg (8.8lbs )
Dimensions:
Width: 550 mm (21-21/32 inches)
Height: 349mm (13-24/32 inches)
Depth: 137mm (5-25/64 inches)
5˚C - 40˚C
Operating temperature:
Operating humidity:
Less than 80% RH
TELEVISION
Type:
599.4mmV (class 24 inches/23.6 inches diagonal)
Transmission TFT color LCD panel
1366 (H) x 768 (V)
Display method:
Number of Pixels:
Tuner type:
US system M
ATSC standard (8VSB), QAM
Receiving channels:
VHF
2-13
UHF
CATV
14-69
14-36 (A)-(W)
37-59 (AA)-(WW)
60-85 (AAA)-(ZZZ)
86-94 (86)-(94)
95-99 (A-5)-(A-1)
100-135 (100)-(135)
01 (4A)
Inputs:
Video:
Audio:
(RCA) 1 V (p-p), 75 ohms
(RCA) –8 dBm/50k ohms
Component video:
(Y) 1 V (p-p), 75 ohms
(Pb)/(Pr) 0.7 V (p-p), 75 ohms
HDMI:
HDMI compliant (type A connector)
HDCP compliant
E-EDID compliant
Suggested scan rates: 480i, 480p, 720p,1080i,1080p
HDMI Audio: 2-channel PCM
32/44.1/48 kHz sampling frequency
16/20/24 bits per sample
PC Monitor:
Mini-Dsub 15pin
Antenna: VHF/UHF In 75 ohms coaxial
Output:
Digital audio out:
0.5 V (p-p), 75 ohms terminated
Speakers:
25.4 mm x 68.6 mm (1 inch x 2-11/16 inches), 8 ohms x 2
2.0W + 2.0W
Audio output power:
DVD/CD player
Signal system:
Applicable disc:
NTSC
1.DVD (12 cm)
2.CD (12 cm)
Pickup:
CD:
Wavelength: 790 nm
Maximum output power: 7 mW
DVD: Wavelength: 655 nm
Maximum output power: 5 mW
ACCESSORIES
Remote control
Batteries (AAA) x 2
Stand
Screws 4x16mm (3/16 x 5/8 inches) x4
Designs and specifications are subject to change without notice.
FOR CUSTOMER SERVICE, ADDITIONAL SET-UP AND OPERATING ASSISTANCE, OR TO ORDER ACCESSORIES PLEASE CALL:
1-800-289-0980
WHEN CALLING CUSTOMER SERVICE – PLEASE HAVE YOUR MODEL NUMBER READY
OR WRITE TO:
ORION SALES, INC.
3471 N. UNION DR.
OLNEY, ILLINOIS 62450
FOR INFORMATION ON OUR OTHER PRODUCTS, TO ORDER ACCESSORIES ONLINE,
OR FOR RECYCLING INFORMATION, PLEASE VISIT OUR WEBSITE AT
Download from Www.Somanuals.com. All Manuals Search And Download.
EN 38
limited
WARRANTY
24” CLASS LED-LCD HDTV WITH DVD PLAYER
ORION warrants this product to be free from manufacturing defects in material and workmanship under
normal use and conditions for a period of 1 year from date of original purchase in the United States.
Should service be necessary under this warranty for any reason due to a manufacturing defect or
malfunction during the first 12 months from date of original purchase, ORION will provide carry-in service
only by an ORION authorized Independent Service Center at no charge. Also, if an original part fails due to
manufacturing defect in material and workmanship within one year from date of original purchase we will replace
the defective part, provided the defect or malfunction is verified along with dated proof of purchase.
There are ORION authorized Independent Service Centers located throughout the country. For the one
be liable for damages incurred in shipment of the unit. If there are no ORION authorized Independent Service
Centers in your area please call - 1-888-296-7466 for assistance.
Note:This warranty is void if the product is:
(a) Damaged through negligence, misuse, abuse, or accident.
(b) Used in a commercial application or rentals.
(c) Modified or repaired by anyone other than an Independent Service Center authorized by ORION to effect
warranty repairs to the class of product or by the ORION Factory Service Center.
(d) Damaged because it is improperly connected to the equipment of other manufacturers.
This warranty does not cover:
(a) Damage to video disc.
(b) Damage to equipment not properly connected to the product.
(c) Costs incurred in the shipping of the product to an ORION authorized Independent Service Center or
ORION Factory Service Center.
(d) Damage or improper operation of unit caused by customer abuse, misuse, negligence, or failure to follow
operating instructions provided with the product.
(e) Ordinary adjustments to the product which can be performed by customer as outlined in the owner’s
manual.
(f) Signal reception problems caused by external antenna or cable systems.
THIS WARRANTY IS NON TRANSFERABLE AND APPLIES ONLY TO THE ORIGINAL PURCHASER
AND DOES NOT EXTEND TO SUBSEQUENT OWNERS OF THE PRODUCT. ANY APPLICABLE IMPLIED
WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY, ARE LIMITED IN DURATION TO A
PERIOD OF THE EXPRESS WARRANTY AS PROVIDED HEREIN BEGINNING WITH THE DATE OF ORIGINAL
PURCHASE AT RETAIL AND NO WARRANTIES, WHETHER EXPRESS OR IMPLIED SHALL APPLY TO THIS
PRODUCT THEREAFTER. ORION MAKES NO WARRANTY AS TO THE FITNESS OF THE PRODUCT FOR
ANY PARTICULAR PURPOSE AND USE.
UNDER NO CIRCUMSTANCES SHALL ORION BE LIABLE FOR ANY LOSS, DIRECT, INDIRECT,
INCIDENTAL, SPECIAL, OR CONSEQUENTIAL DAMAGE ARISING OUT OF OR IN CONNECTION WITH THE
USE OF THIS PRODUCT.
THIS WARRANTY IS VALID ONLY IN THE UNITED STATES OF AMERICA. THIS WARRANTY GIVES YOU
SPECIFIC LEGAL RIGHTS, HOWEVER, YOU MAY HAVE OTHER RIGHTS WHICH MAY VARY FROM STATE
TO STATE. SOME STATES DO NOT ALLOW LIMITATION ON IMPLIED WARRANTIES OR EXCLUSION OF
CONSEQUENTIAL DAMAGE, THEREFORE THESE RESTRICTIONS MAY NOT APPLY TO YOU.
ORION SALES, INC.
3471 N. UNION DR.
OLNEY, ILLINOIS 62450
Download from Www.Somanuals.com. All Manuals Search And Download.
39 EN
|