OWNER’S MANUAL
GUIDE D’UTILISATION
24” CLASS LED-LCD HDTV
LED-LCD HDTV CATÉGORIE 24 PO
SLED2400
ATTENTION
ATTENTION
If you purchase a universal remote control from your local retailer, please contact the remote manufacturer for the
required programming code.
Si vous utilisez avec cet appareil une télécommande universelle (autre que celle vendue avec ce téléviseur),
consultez la documentation accompagnant la télécommande universelle afin de connaître le code numérique cor-
respondant au téléviseur.
AIR/CABLE MODE SELECTION
SÉLECTION DU MODE AIR/CABLE
When shipped from the factory, the Signal Type option is set to the “Cable” (Cable Television) mode.
If not using Cable TV, set this menu option to the “Air” position.
Lorsque l’appareil sort de l’usine, l’option Signal Type est en mode « Cable » (câblodistribution). Si vous
n’utilisez pas la câblodistribution, sélectionnez l’option « Air ».
IF CONTACT WITH CUSTOMER SERVICE IS REQUIRED
PLEASE HAVE THE MODEL NUMBER READY PRIOR TO THE CALL.
SI VOUS DEVEZ COMMUNIQUER AVEC LE SERVICE CLIENTÈLE, PRENEZ NOTE
DU NUMÉRO DE MODÈLE AVANT D’APPELER.
CUSTOMER SERVICE – 1-800-289-0980
SERVICE/SERVICE CLIENTÈLE: 1-800-289-0980
ORION WEBSITE
SITE WEB ORION
FOR INFORMATION ON OUR OTHER PRODUCTS, TO ORDER ACCESSORIES ONLINE,
OR FOR RECYCLING INFORMATION, PLEASE VISIT OUR WEBSITE AT
POUR OBTENIR DES INFORMATIONS SUR NOS AUTRES PRODUITS, POUR COMMANDER DES ACCESSOIRES,
OU LE RECYCLAGE, VEUILLEZ VISITER NOTRE SITE WEB:
Before operating the unit, please read this manual thoroughly.
Avant de faire fonctionner l’appareil, veuillez lire le présent guide attentivement.
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
15) Apparatus should not be exposed to dripping or splashing, and objects filled with liquids, such as
vases, should not be placed on the apparatus.
16) An outside antenna system should not be located in the vicinity of overhead power lines or other
electric light or power circuits, or where it can fall into such power lines or circuits. When installing an
outside antenna system, extreme care should be taken to keep from touching such power lines or
circuits, as contact with them might be fatal.
17) Do not overload wall outlets and extension cords, as this can result in a risk of fire or electric shock.
18) Do not push objects through any openings in this unit, as they may touch dangerous voltage points
or short out parts that could result in fire or electric shock. Never spill or spray any type of liquid into
the unit.
19) If an outside antenna or cable system
is connected to the unit, be sure the
antenna or cable system is grounded
to provide some protection against
voltage surges and built-up static
EXAMPLE OF ANTENNA GROUNDING AS PER THE NATIONAL ELECTRICAL CODE
ANTENNA LEAD IN WIRE
GROUND
CLAMP
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
charges, Section 810 of the National
Electrical Code, ANSI/NFPA 70, provides
information with respect to proper
grounding of the mast and supporting
structure, grounding of the lead-in
wire to an antenna discharge unit, size
of grounding conductors, location of
antenna discharge unit, connection to
ELECTRIC SERVICE
EQUIPMENT
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
NEC-NATIONAL ELECTRICAL CODE
S2898A
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
grounding electrodes, and requirements for the grounding electrode.
Download from Www.Somanuals.com. All Manuals Search And Download.
3 EN
IMPORTANT SAFETY INSTRUCTIONS
20) When replacement parts are required, be sure the service technician uses replacement parts
specified by the manufacturer or those that have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric shock or other hazards.
21) Upon completion of any service or repairs to this unit, ask the service technician to perform safety
checks to determine that the unit is in proper operating condition.
22) When you connect the product to other equipment, turn off the power and unplug all of the
equipment from the wall outlet. Failure to do so may cause an electric shock and serious personal
injury. Read the owner's manual of the other equipment carefully and follow the instructions when
making any connections.
23) Sudden high volume sound may cause hearing or speaker damage. When you use headphones,
(if the unit is equipped with a headphone jack) keep the volume at a moderate level. If you use
headphones continuously with high volume sound, it may cause hearing damage.
24) Do not allow the product to output distorted sound for an extended period of time. It may cause
speaker overheating and fire.
25) This reminder is provided to call the cable TV system installer’s attention to Article 820-40 of the
NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground
shall be connected to the grounding system of the building, as close to the point of cable entry as
practical.
26) The socket-outlet must be installed near the unit and easily accessible.
CHILD SAFETY:
It Makes A Difference How and Where You Use Your Flat Panel Display
Congratulations on your purchase! As you enjoy your new product, please keep these safety tips in mind:
THE ISSUE
The home theater entertainment experience is a growing trend and larger flat panel displays are popular
purchases. However, flat panel displays are not always supported on the proper stands or installed
according to the manufacturer’s recommendations.
Flat panel displays that are inappropriately situated on dressers, bookcases, shelves, desks, speakers,
chests or carts may fall over and cause injury.
THIS MANUFACTURER CARES!
The consumer electronics industry is committed to making home entertainment enjoyable and safe.
TUNE INTO SAFETY
One size does NOT fit all. Follow the manufacturer’s recommendations for the safe installation and use of
your flat panel display.
Carefully read and understand all enclosed instructions for proper use of this product.
Don’t allow children to climb on or play with furniture and television sets.
Don’t place flat panel displays on furniture that can easily be used as steps, such as a chest of drawers.
Remember that children can become excited while watching a program, especially on a “larger than life” flat
panel display. Care should be taken to place or install the display where it cannot be pushed, pulled over, or
knocked down.
Care should be taken to route all cords and cables connected to the flat panel display so that they cannot be
pulled or grabbed by curious children.
WALL MOUNTING: IF YOU DECIDE TO WALL MOUNT YOUR FLAT PANEL DISPLAY, ALWAYS:
Use a mount that has been recommended by the display manufacturer and/or listed by an independent
laboratory (such as UL, CSA, ETL).
Follow all instructions supplied by the display and wall mount manufacturers.
If you have any doubts about your ability to safely install your flat panel display, contact your retailer about
professional installation.
Make sure that the wall where you are mounting the display is appropriate to support the weight of the unit/
product and wall mount. If you are unsure, contact a professional installer.
A minimum of two people are required for installation. Flat panel displays can be heavy.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN 4
IMPORTANT SAFETY INSTRUCTIONS
CONDENSATION
Moisture will form in the operating section of the unit if the unit is brought from cool surroundings into a warm
room or if the temperature of the room rises suddenly. When this happens, unit's performance will be impaired.
To prevent this, let the unit stand in its new surroundings for about an hour before switching it on, or make sure
that the room temperature rises gradually.
Condensation may also form during the summer if the unit is exposed to the breeze from an air conditioner. In
such cases, change the location of the unit.
HOW TO HANDLE THE LCD PANEL
• Do not press hard or jolt the LCD panel. It may cause the LCD panel glass to break and injury may occur.
• If the LCD panel is broken, make absolutely sure that you do not touch the liquid in the panel. This may cause
skin inflammation.
If the liquid gets in your mouth, immediately gargle and consult with your doctor. Also, if the liquid gets in your
eyes or touches your skin, consult with your doctor after rinsing for at least 15 minutes or longer in clean water.
Possible Adverse Effects on LCD Panel: If a fixed (non-moving) pattern remains on the LCD Panel for
long periods of time, the image can become permanently engrained in the LCD Panel and cause subtle but
permanent ghost images. This type of damage is NOT COVERED BY YOUR WARRANTY. Never leave your
LCD Panel on for long periods of time while it is displaying the following formats or images:
• Fixed Images, such as stock tickers, video game patterns, TV station logos, and websites.
• Special Formats that do not use the entire screen. For example, viewing letterbox style (16:9) media on
a normal (4:3) display (black bars at top and bottom of screen); or viewing normal style (4:3) media on a
widescreen (16:9) display (black bars on left and right sides of screen).
The following symptoms are not signs of malfunction but technical limitation. Therefore we disclaim any
responsibility for these symptoms.
• LCD Panels are manufactured using an extremely high level of precision technology, however sometimes
parts of the screen may be missing picture elements or have luminous spots.
This is not a sign of a malfunction.
• Do not install the LCD Panel near electronic equipment that produces electromagnetic waves. Some
equipment placed too near this unit may cause interference.
• Effect on infrared devices – There may be interference while using infrared devices such as infrared cordless
headphones.
SAFETY PRECAUTIONS
The unit emits heat when in operation. Do not place any covers or blankets on the unit, this may cause overheating.
Do not block ventilation holes, or set up near radiators. Do not place in direct sunshine. When placing on a shelf leave 4 inches
(10 cm) free space around the entire unit.
4 inches
4 inches
Notes when mounting the TV on a wall
•
If the unit is to be mounted on the wall, contact the retailer where you
purchased the TV for advice, and have the equipment professionally
installed. Incomplete or improper installation may cause injury to you,
and/or damage to the TV.
•
Bracket holes:To attach a wall mounting bracket (not supplied) attach
where indicated in the drawing right.
Bracket holes
•
•
This manufacturer recommends professional installation.
Utilize an appropriate bracket and fasteners, sufficient to
accommodate the size and weight of the unit.
•
Assure the wall to which the unit is to be mounted will safely support
the size and weight of the unit, using the bracket and fasteners you
have selected.
•
•
Keep cords and cables connected to this flat panel display out of
reach of children.
To hang the television on a wall, remove these screws and then
remove a stand. Before performing work spread cushioning over the
base area to lay the TV on.
Screws
•
Before wall-mounting, please check carefully the location of the TV’s
Download from Www.Somanuals.com. All Manuals Search And Download.
mounting-holes.
5 EN
How to attach the stand
NOTE:
• Unplug the AC cord.
• Before beginning this process, assure that the TV is laid on a clean, safe, and cushioned surface to avoid
any damage to the unit.
• Do not touch or press the TV-screen, glass might break under pressure.
Place the TV on its front onto a table.
Align the stand’s bottom-plate (supplied) as seen here.
It will fit in only one direction.
Hold the unit and attach the stand slowly, as shown in Figure 1.
LCD PANEL FRONT
Figure 1
Figure 2
Finally secure the bottom-plate with 3 screws (supplied) (4x16mm(5/32 x 5/8 inches)) as indicated by the arrows
in Figure 2.
• Be sure to follow the instructions. Insufficient tightening or incorrect installation of the stand will not support
your unit correctly, and could result in damage or injury from tip-over.
How to remove the stand
When you transport this product, remove the stand and pack flat against the back of the unit in the carton. To
remove the stand, perform these steps in reverse order.
For wall mounting, the base must be removed. To disconnect the base/stand remove the three (3) screws from
the back (see page 5).
Download from Www.Somanuals.com. All Manuals Search And Download.
EN 6
Features
• Integrated Digital Tuner - You can view digital broadcasts without using a Digital TV Set-Top Box.
• Closed Caption Decoder With Full Text Mode - Displays text captions or full screen text on the screen for
hearing impaired viewers.
• Picture Adjustments Using The Remote Control - The On-Screen display allows precise remote control
adjustment of BRIGHTNESS, CONTRAST, COLOR, TINT and SHARPNESS.
• Programmable TV Sleep Timer - Operable from the remote control, the TV can be programmed for up to
120 minutes to turn off automatically.
• V-Chip - The V-Chip function can read the rating of a broadcast program or movie content if the program is
encoded with this information. V-Chip will allow you to set a restriction level.
• Digital Audio Jack (Coaxial) - When a component with a built-in Dolby Digital decoder is connected, Dolby
Digital sound can produce the effect of being in a movie theater or a concert hall.
• HDMI/Component Video Jacks - A VCR, DVD player, satellite receiver or other audio/video component can
be connected to this unit.
• On-Screen 3 Languages Display - You can select one of 3 languages, English, French or Spanish for on-
screen programming.
* Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of
Dolby Laboratories.
* The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or
registered trademarks of HDMI Licensing LLC in the United States and other countries.
Power source
TO USE AC POWER SOURCE
Use the AC polarized line cord provided for operation on AC. Insert the AC cord plug into a standard 120V 60Hz
polarized AC outlet.
AC Outlet
Wider Hole and Blade
Polarized AC Cord Plug
(One blade is wider than the other.)
NOTE:
• Never connect the AC line cord plug to other than the specified voltage (120V 60Hz).
Use the attached power cord only.
• If the polarized AC cord does not fit into a non-polarized AC outlet, do not attempt to file or cut the blade.
It is the user’s responsibility to have an electrician replace the obsolete outlet.
• If you cause a static discharge when touching the unit and the unit fails to function, simply unplug the unit from
the AC outlet and plug it back in. The unit should return to normal operation.
Download from Www.Somanuals.com. All Manuals Search And Download.
7 EN
Contents
Before using your unit
IMPORTANT SAFETY INSTRUCTIONS...........3
SAFETY PRECAUTIONS .................................5
How to attach the stand ....................................6
How to remove the stand ..................................6
Features............................................................7
Power source....................................................7
Contents ...........................................................8
Parts and functions ...........................................9
Remote control ...............................................10
Antenna connections ......................................11
Cable TV connections.....................................11
Connections to other equipment.....................12
TV operation
Starting setup .................................................15
TV operation ...................................................15
Quick guide for menu operation......................16
Convenience functions ...................................17
Memorizing channels......................................18
Checking the digital signal strength ................19
Labeling channels...........................................19
Labeling video inputs......................................19
Setting the V-Chip ...........................................20
Closed Caption...............................................21
CC advanced..................................................21
Setting the picture size....................................22
Time Shift........................................................23
Additional information
Reception disturbances ..................................24
Troubleshooting ..............................................25
Specifications ................................................26
limited WARRANTY ........................................27
Download from Www.Somanuals.com. All Manuals Search And Download.
EN 8
Parts and functions
Front
Right side
INPUT/ENTER button
CH (CHANNEL)
/
/▲/▼ buttons
VOL (VOLUME) +/–/▶/◀
buttons, MENU button
POWER button
Remote sensor
To display the menu screen.
Press hold VOL (VOLUME) +/–
simultaneously about 1 second the
menu will be appear.
Power Indicator
Red: Standby
Green: On
CH (CHANNEL)
/
buttons, VOL
(
VOLUME) +/– buttons and INPUT/
ENTER button can be used to select the
desired setting during the menu screen
operations.
PC MONITOR IN jack
DIGITAL AUDIO
COAXIAL OUT jack
Right Side
PC/DVI AUDIO IN jack
Rear
HEADPHONE jack
COMPONENT IN jacks
VIDEO IN jacks
(VIDEO/AUDIO (L/R))
ANT. (RF) IN jack
HDMI/DVI IN jack
USB INPUT
Download from Www.Somanuals.com. All Manuals Search And Download.
9 EN
Remote control
6.MENU Button - Use to display the On-Screen
menu function.
1
2
7.AUDIO Button - Change soundtrack language.
8.INPUT SELECT Button - Use to change the
external input.
9.PICTURE SIZE Button - Use to change the
picture size.
10.RECALL Button - This button allows you to go
back to the previous channel selected by just
pressing the RECALL button. Press this button
again to return to the channel you were watching.
11.MUTE Button - To turn off the sound, press this
button once. The TV will be silenced and the
symbol “Mute” will appear on the screen. The
muting feature can be released by pressing the
MUTE button again or one of the VOL (VOLUME)
+ or – buttons.
10
3
4
11
12
5
13
6
7
8
9
14
15
16
12.VOL (VOLUME) + / – / CURSOR
/
Buttons
- Use to operate the menu functions of the TV.
Press the button to increase, or the button to
decrease the sound level.
17
13.ENTER Button - Use to enter or select
1. (POWER) Button - Use to turn the power on/off
information for On-Screen operations.
to the TV.
14.EXIT Button - Press to remove setup menu.
2.Direct Channel Selection Buttons (0-9) - Allows
15.CCD Button - Use to display the Closed Caption
direct access to any channel of the TV.
menu screen.
3.– Button -This button is used when selecting
16.DISPLAY Button - When you press this button,
the current information will be displayed on a
screen. To remove the display from the screen,
press this button again.
digital channels.
4.SLEEP Button - To set the TV to turn off after a
preset amount of time, use the SLEEP button on
the remote control.
17.Time Shift control Buttons - See page 23.
5.CH (CHANNEL) + / – / CURSOR
/
Buttons - Use to operate the menu functions of
the TV, and to change the channels of the TV.
Before using the remote control, batteries must first be installed.
HOW TO INSTALL BATTERIES
1. Open the battery compartment cover.
Use two “AAA” size batteries. The batteries may last
approximately one year depending on how much the
remote control is used. For best performance, it is
recommended that batteries should be replaced on a
yearly basis, or when the remote operation becomes
erratic. Do not mix old and new batteries or different
types.
BATTERY PRECAUTIONS
These precautions should be followed when using
batteries in this device:
• Use only the size and type of batteries specified.
• Be sure to follow the correct polarity when
installing the batteries as indicated in the battery
compartment. Reversed batteries may cause
damage to the device.
2. Install two “AAA” batteries (supplied).
3. Replace the battery compartment cover.
• Do not mix different types of batteries together
(e.g. Alkaline, Carbon-zinc or Rechargeable) or old
batteries with fresh ones.
• If the device is not to be used for a long period of
time, remove the batteries to prevent damage or
injury from possible battery leakage.
• Do not try to recharge batteries not intended to be
recharged; they can overheat and rupture. (Follow
battery manufacturer’s directions.)
Download from Www.Somanuals.com. All Manuals Search And Download.
EN 10
Antenna connections
If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your
antenna system. If you are using a Cable TV service, see “Cable TV connections”.
Combination VHF/UHF Antenna (Single 75 ohm cable)
Connect the 75 ohm cable from the combination
Antenna
VHF/UHF antenna to the Antenna Jack.
Jack
75 ohm
Coaxial
Cable
Cable TV connections
This TV has an extended tuning range and can tune most cable channels without using a Cable TV
Converter box. Some cable companies offer “premium pay channels” where the signal is scrambled.
Descrambling these signals for normal viewing requires the use of a descrambler device which is
generally provided by the Cable TV company.
For subscribers to basic Cable TV service
For basic Cable TV service not requiring a Converter/
75 ohm
Descrambler box, connect the 75 ohm Coaxial Cable directly
Coaxial
Cable
Antenna
Jack
to the Antenna Jack on the back of the TV.
For subscribers to scrambled Cable TV service
If you subscribe to a Cable TV service which requires the use of a Converter/Descrambler box, connect
the incoming 75 ohm Coaxial Cable to the Converter/Descrambler box. Using another 75 ohm Coaxial
Cable, connect the output jack of the Converter/Descrambler box to the Antenna Jack on the TV. Follow the
connections shown below. Set the TV to the output channel of the Converter/Descrambler box (usually channel
3 or 4) and use the Converter/Descrambler box to select channels.
Incoming
75 ohm
Cable TV
Cable
Antenna
Jack
75 ohm Cable to TV
Converter/
Descrambler
For subscribers to unscrambled Cable TV service with scrambled premium channels
If you subscribe to a Cable TV service in which basic channels are unscrambled and premium channels require
the use of a Converter/Descrambler box, you may wish to use a signal Splitter and an A/B Switch box (available
from the Cable TV company or an electronics supply store). Follow the connections shown below. With the
switch in the “B” position, you can directly tune any nonscrambled channels on your TV. With the switch in the
“A” position, tune your TV to the output of the Converter/Descrambler box (usually channel 3 or 4) and use the
Converter/Descrambler box to tune scrambled channels.
Incoming
Converter/
75 ohm
Cable TV
Cable
Antenna
Jack
Descrambler
75 ohm Cable to TV
A
A/B Switch
Splitter
B
Download from Www.Somanuals.com. All Manuals Search And Download.
11 EN
Connections to other equipment
The exact arrangement you use to interconnect various video and audio components to this unit is dependent
on the model and features of each component. Check the Owner’s Manual provided with each component for
the location of video and audio inputs and outputs.
To connect the TV to a VCR
Right of the unit
VCR
To VIDEO/AUDIO IN
To Video/Audio OUT
Video/Audio cord (not supplied)
To connect the TV to a DVD player with Component Video Input
You can enjoy a high quality picture by connecting the unit’s COMPONENT VIDEO OUT jacks of your DVD
player with the component video cables (not supplied).
Right of the unit
To COMPONENT IN
To AUDIO IN
To Audio OUT
Pr
Audio cord
(not supplied)
Pb
Y
DVD
Y
Component video cord
(not supplied)
Pb
Pr
To Component OUT
NOTE:
• Component Video input of the unit are for use with a device which output 480i/1080i interlaced signals and
480p/720p progressive signals.
To connect the TV to a camcorder, or a game console
To playback from a camcorder, connect the camcorder to the unit as shown.
This unit can also be used as a display device for many video games. However, due to the wide variety of
signals generated by these devices and subsequent hook-up variations required, they have not all been
included in the suggested connection diagrams.You’ll need to consult each component’s Owner’s Manual for
additional information.
Right of the unit
To VIDEO/AUDIO IN
To Video/Audio OUT
GAME CONSOLE
or
Video/Audio cord (not supplied)
Download from Www.Somanuals.com. All Manuals Search And Download.
EN 12
Connections to other equipment
Using an AV Amplifier with built-in digital surround
If you are using an Amplifier with built-in digital surround sound, you can enjoy various audio systems including
Dolby Digital Surround audio that sounds just like the movie.
Connect an AV amplifier with built-in Dolby Digital decoder, etc. as shown below.
Rear of the unit
Front
Speaker
Subwoofer
(Right)
TV
Front
Speaker
(Left)
To DIGITAL AUDIO
COAXIAL OUT
Coaxial digital cable
(not supplied)
To Coaxial
Center Speaker
Digital Audio Input
Surround
Surround
Speaker (Left)
Speaker
(Right)
AV Amplifier with built-in digital surround decoder
NOTE:
• When you are viewing digital broadcast, this unit will not work in conjunction with DTS audio or MPEG audio.
There will be no sound output if connected to an AV amplifier with a built-in DTS decoder or MPEG decoder.
To connect the TV to a PC (Personal Computer)
BEFORE YOU CONNECT THIS TV TO YOUR PC, CHANGE THE ADJUSTMENT OF YOUR PC’S
RESOLUTION AND REFRESH RATE (60 HZ).
Connect one end of a (male to male) VGA cable to the video cord of the computer and the other end to the VGA connector PC
MONITOR IN on the rear of the TV. Attach the connectors firmly with the screws on the plug. In case of a Multimedia computer,
connect the audio cord to the audio output of your Multimedia computer and to the AUDIO IN connector of the PC/DVI AUDIO
IN jack of the TV.You can also connect the PC with HDMI cable. If you use HDMI cable, you don’t have to connect the audio
cord. If you use DVI-to-HDMI cable, please connect audio cord as same way as VGA cable.
Press INPUT SELECT on the remote control to select PC mode.
Switch on the computer. The TV can operate as the computer monitor.
Monitor Display modes
MODE Resolution Refresh rate
Rear and right of the unit
VGA
VGA
640x480 60/ 72/ 75 Hz
720x400 70Hz
SVGA 800x600 56/ 60/ 72/ 75 Hz
XGA 1024x768 60/ 70/ 75 Hz
WXGA 1280x768 60Hz
WXGA 1280x720 60Hz
WXGA 1360x768 60Hz
To HDMI/DVI IN
To PC/DVI
AUDIO IN
To PC
MONITOR
IN
HDMI cable (not supplied)
VGA cable (not supplied)
To return to normal mode
Press INPUT SELECT again.
Audio cord (not supplied)
NOTE:
•
•
The on-screen displays will have a different appearance in PC mode than in TV mode.
If there is no video signal from the PC when the unit is in PC mode, “No signal” will appear on the TV-screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
13 EN
Connections to other equipment
To connect a HDMI or a DVI device to the unit
The HDMI input receives digital audio and uncompressed video from a HDMI device or uncompressed digital
video from a DVI device.
When you connect to a DVI device with a HDMI-to-DVI adapter cable, it transfers only video signal. Separate
analog audio cords required.
Rear and right of the unit
To PC/DVI AUDIO IN
Audio cord (not supplied)
To DVI output
HDMI - to - DVI adapter cable
(HDMI type A connector)
DVI device
(not supplied)
or
To HDMI/DVI IN
HDMI device
HDMI cable (type A connector)
(not supplied)
To HDMI output
NOTE:
• When using HDMI/DVI IN to connect your HDMI or DVI devices, you must select the corresponding
audio input source (HDMI or DVI) on the menu screen (see page 17). Otherwise you will only see the
image with no sound.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN 14
Set the Signal Type option to the appropriate
position (see “Air/Cable selection” on page 18).
Starting setup
3
4
The Auto Setup menu appears the first time you
turn on the TV, and assists you to specify the
Air/Cable setting, and program your channels
automatically.
Press the Direct Channel Selection (0-9, –)
buttons to select the channel.
(If you press only channel number, channel
selection will be delayed for a few seconds.)
TO SELECT ANALOG CHANNELS
IMPORTANT: Make sure that the antenna or cable
TV system connection is made!
1-9:
Press 1-9 as needed. Example, to
select channel 2, press 2, then press
ENTER.
To turn on the TV, press POWER. (POWER
1
10-99:
Press the 2 digits in order. Example,
to select channel 12, press 1, 2, then
press ENTER.
indicator on the front of the unit changes green. It
may take approx. 10 seconds for a picture to appear
on screen.) The Auto Setup function begins.
Auto Setup
100-135: Press the 3 digits in order. Example, to
select channel 120, press 1, 2, 0, then
press ENTER.
TV Location
Store
Cable
Start
Signal Type
Automatic Search
TO SELECT DIGITAL CHANNELS
Press the first 1-3 digits, then press the – button,
followed by the remaining number.
Press
or
to select “TV Location”, then press
2
or to select “Store” or “Home”.This product qualifies
Example, to select channel 15-1, press 1, 5, –, 1,
then press ENTER.
for ENERGY STAR in Home mode default setting.
NOTE:
• If a channel is selected with only audio content,
“Audio only” will be displayed on the screen.
• If a channel is selected with a weak digital
signal, “Digital channel signal strength is low”
will be displayed on the screen.
•
This unit has been preset to STORE brightness.
This setting does not qualify under ENERGY STAR.
To reduce brightness and energy consumption,
change setting to ‘HOME’.This setting does qualify
under ENERGY STAR.
The same program may be available on either
an analog channel or a digital channel.You may
choose to watch either format.
•
The device may not conform to the ENERGY
STAR standard after “Reset” is performed or the
“Backlight” is adjusted.
• If a channel is selected to which you have not
subscribed, “Digital channel is encrypted” will
be displayed on the screen.
3
4
5
Press
or
to select “Signal Type”, then press
or to select “Cable” or “Air”.
Press
or
to select “Automatic Search”, then
VHF/UHF/CABLE CHANNELS
press or ENTER.
Air
Cable
“Auto Setup” will begin. After the Auto Setup is
VHF
VHF
completed, the TV channel appears on the screen.
2-13
2-13
•
Depending on the reception condition, it may
take up to 30 minutes to complete memorizing
digital cable channels. Please allow the process to
complete without interruption.
UHF
STD/HRC/IRC
14-69
14-36
(A) (W)
37-59
60-85
86-94
95-99
(AA) (WW)
(AAA) (ZZZ)
(86) (94)
NOTE:
• If you press EXIT in the process of “Auto Setup”,
the Auto Setup stops and changes to the normal
screen.
(A-5) (A-1)
100-135 (100) (135)
01
(4A)
• When you make a menu selection, your changes
occur immediately.You do not have to press EXIT to
see your changes.
NOTE:
• If a channel with no broadcast is selected, the
sound will automatically be muted.
TV operation
• It may take a few seconds for a digital channel
picture to appear on screen after being selected.
To turn on the TV, press POWER. (POWER
1
To select the video input source
indicator on the front of the unit changes green.
It may take approx. 10 seconds for a picture to
appear on screen.)
To view a signal from another device connected
to your TV, such as a VCR player, press INPUT
SELECT, then press
or
or corresponding
Number buttons (0-4), then press ENTER.
Adjust the volume level by pressing VOL + or – .
2
The volume level will be indicated on the screen
by green bars. As the volume level increases, so
do the number of bars. If the volume decreases,
the number of green bars also decreases.
Input Select
0.TV
1.Video
2.Component
3.HDMI
4.PC
[0-4]:Select
Download from Www.Somanuals.com. All Manuals Search And Download.
15 EN
CH +/
-
Quick guide for menu
operation
Press and release CH + / –. The channel
automatically stops at the next channel set into
memory.
For proper operation, before selecting channels, they
should be set into the memory. See “Memorizing
channels” on page 18.
Call menu and for example: Select Language.
Press INPUT SELECT to select TV mode.
1
DISPLAY
Press MENU. The TV menu screen will appear.
2
Press DISPLAY to display the current information on
Main Menu
the screen.
>>
Picture
Audio
When the TV receives a digital signal, the digital
CH
Channel
Lock
information will appear.
Setup
Sleep Timer
62-1 HDTV_Moving_Picture...
Off
CH-1 TV-MA
Digital Air
English
:Select
ENTER :Set
No Program Information is available
USB Memory Information
Play Time
:
--:--:--
Message
:
Now Live View
Press
or
or
to select “Setup”, then press or
to select “Language”, then press
3
4
USB Memory is unplugged
ENTER.
Full
1080i
Press
• Channel number
• Channel label (if preset) • Broadcast program name
• V-Chip rating
• Sleep timer
• Program guide
• Resolution
• Station name
or to select the desired language.
…on the following pages the menu can be called
in the same way as here.
• Signal type
• Audio language
• Picture size
Press EXIT to return to the normal screen.
5
• Time Shift display
NOTE:
• If no buttons are pressed for more than about 60
seconds, the menu screen will return to normal
operation automatically.
When the TV receives an analog signal, the analog
information will appear.
Sleep Timer
Off
14
G
Analog Cable
Mono
Full
480i
• Channel number
• V-Chip rating
• Channel label (if preset)
• Signal type
• Sleep timer
• Picture size
• Audio information
• Resolution
(Stereo, SAP or Mono)
Press DISPLAY again to clear the call display.
NOTE:
• After a few seconds, DISPLAY screen will return to
normal TV operation automatically.
SLEEP
To set the TV to turn off after a preset amount of time,
press SLEEP on the remote control. The clock will
count up 10 minutes for each press of the SLEEP but-
ton (Off, 0h 10m, 0h 20m, ..., 2h 0m). After the sleep
time is programmed, the display will appear briefly
every ten minutes to remind you that the sleep timer
is operating. To confirm the sleep timer setting, press
SLEEP and the remaining time will be displayed for a
few seconds. To cancel the sleep timer, press SLEEP
repeatedly until the display turns to Off.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN 16
Convenience functions
You can change the default settings by pressing the MENU button on your remote, then select the one of the icons at the left
of the menu - follow the On-Screen prompts to set your preferences.
Icon
Selected Items
Sports
Setup hint
Bright and dynamic picture (factory-set)
Picture Picture
Preference
Standard
Movie
Standard picture quality (factory-set)
Movie-like picture setting (factory-set)
Your personal preferences (set by you; see “Picture Setting”)
You can adjust the picture quality to your preference.
Memory
Picture Setting Brightness /Contrast /
Sharpness / Color / Tint
Color Temperature
Backlight*2
Cool (Bluish) / Standard (Neutral) / Warm (Reddish)
The Backlight feature adjusts the screen brightness for improved
picture clarity.
DBC
On/Off
Use this feature to change the Black level automatically according to the
brightness of an image.The Black level will become dark in a dark scene.
Picture Size
Film Mode
See page 22.
On/Off
A smoother motion may be obtained by setting the Film Mode to “On”
(480i only).
PC Setting
Hor Position /
Ver Position
To adjust the horizontal / vertical position of the image on the PC monitor
screen. Each video standard will require a different value for this setting.
Clock
Phase
To minimize any vertical bars or stripes visible on the screen background.
This must be adjusted after the frequency has been set optimize picture quality.
To adjust the all PC settings automatically.
Auto Adjust
On/Off
DNR
DNR (Digital Noise Reduction) can reduce the roughness of the picture.
Audio
Equalizer Mode Standard/Music/Movie/ You can adjust the Equalizer Mode to your preference.
News/Memory/Flat
Audio Setting Bass/Treble
You can adjust the sound quality to your preference. (Flat mode only)
Equalizer Setting
100Hz/250Hz/500Hz/1kHz/2kHz/4kHz/10kHz (Not available in Flat mode)
Balance
You can adjust the sound quality to your preference.
MTS
Stereo / SAP / Mono
The multi-channel TV sound (MTS) feature provides high-fidelity
stereo sound. MTS also can transmit a second audio program (SAP)
containing a second language or other audio information.
When the TV receives a stereo or SAP broadcast, the word “Stereo” or
“SAP” displays on-screen every time you press DISPLAY.
Surround
On/Off
On/Off
The dynamic presence and sound created offers a thoroughly
enjoyable listening experience.
Auto Volume
Audio Language
Volume level can be adjusted automatically by the sound level.
When two or more audio languages are included in a digital signal, you can select
one of the audio languages. (This function is available only for digital broadcast.)
HDMI Audio
HDMI
DVI
When you connect the HDMI device to the TV, select this setting.
When you connect the DVI device to the TV with analog audio cords,
select this setting.
Channel Add / Delete
DTV Signal
See page 18.
See page 19.
See page 18.
See page 19.
See page 20.
See page 21.
Auto Ch Memory
Ch Label
Lock
Setup
Closed Caption
Language
You can choose from three different languages (English, Français (French) and
Español (Spanish)) for the on-screen displays.
Select the language you prefer first, then proceed with the other menu options.
Video Label
On Timer
See page 19.
Off / 0h30m / 1h00m
/ 1h30m / 2h00m /
3h00m⋅⋅⋅12h00m
On/Off
You can set the On Timer to automatically turn on the TV. To cancel the
On Timer select “Off”.
1
Auto Shut Off
*
If the Auto Shut Off feature is On, a station being viewed stops
broadcasting and the TV is not operated, the TV will automatically shut
itself off after 15 minutes.
Auto Setup
See page 15.
Power On LED On/Off
When you turn on the TV, Power indicator on the front of the TV will light.
PC Standby
On/Off
In PC mode, if no signal is received or no operation performed for 1
minute, the TV will turn to standby mode automatically (LED light will
flash red). When an input signal is received or an operation performed
on the PC, the TV will return to the on mode.
Reset*2
The Reset function returns your Picture/Audio settings to the factory settings.
“Picture Size”, “MTS” , “Audio Language” and “HDMI Audio” cannot be
reset by this function.
NOTE:
1
*
*
If there is no input signal in the PC mode, after 1 minute Auto Shut Off will be activated. In PC mode the “PC Standby”
setting takes precedence.
2
The device may not conform to the Energy Star standard after Reset is performed or the Backlight is adjusted.
Download from Www.Somanuals.com. All Manuals Search And Download.
17 EN
Adding Channel
Memorizing channels
If you find a new digital channel unregistered, you can
add the new channel into the channel memory.
This TV is equipped with a channel memory
feature which allows channels to skip up or down
to the next channel set into memory, skipping
over unwanted channels. Before selecting
channels, they must be programmed into the
TV’s memory. To use this TV with an antenna, set
the Signal Type option to the Air mode. When
shipped from the factory, this menu option is in
the Cable mode.
Tune in the new channel.
1
Select “Channel ⇒ Add/Delete ⇒ Adding
2
Channel”, then press or ENTER.
CH
Add/Delete
Adding Channel
Add/Delete
Clear All
>>
>>
>>
Air/Cable selection
The new channel will be added into the channel
memory.
3
Select “Channel ⇒ Auto Ch Memory ⇒ Signal
1
2
Type”.
Press or to select “Air” or “Cable”.
Add/Delete channel
You can select the channel that you want to skip.
Air - VHF/UHF channels
Cable - CABLE TV channels
Select “Channel ⇒ Add/Delete ⇒ Add/Delete”,
1
2
then press or ENTER.
CH
Auto Ch Memory
Press
or
to select the channel that you
Signal Type
Automatic Search
Cable
Start
want to skip.
CH
Add/Delete
NOTE:
CH
Signal
2
3
Analog
Add
• It may take a few seconds for a digital channel
picture to appear on screen after being selected.
Analog
Digital
Digital
Analog
Add
3-1
3-2
4
Delete
Add
Delete
Automatic Search
Select “Channel ⇒ Auto Ch Memory ⇒ Automatic
1
Search”, then press or ENTER.
3
4
Press or to select “Add” or “Delete”, whichever
function you want to perform.
Repeat steps 2 - 3 for other channels you want to
add or delete.
CH
Auto Ch Memory
Signal Type
Automatic Search
Cable
Stop
Clear All
The TV will begin memorizing all the channels
available in your area.
2
All channels are deleted from the channel memory.
Select “Channel ⇒ Add/Delete ⇒ Clear All”, then
• It may take from 15 minutes to 30 minutes to
complete memorizing digital cable channels.
Depending on the reception condition, a bar
display may not advance for several minutes,
please be patient.
press or ENTER.
CH
Add/Delete
Adding Channel
Add/Delete
Clear All
>>
>>
>>
NOTE:
•
Memorizing channels is best accomplished during
evening “PRIMETIME” hours, as more stations are
broadcasting digital signals. Memorizing channels can
only be accomplished while a station is broadcasting
a digital signal to set that channel into memory.
• If you are unsure of the digital channels available
receive a list based on your address or zip code.
Should you require further assistance you may call
our toll-free customer service line at 1-800-289-0980.
• New digital channels may be added to your area
periodically, it is recommended to perform the
“Automatic Search” procedure regularly.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN 18
If the character which you desire appears, press
ENTER.
Checking the digital
signal strength
Repeat this step to enter the rest of the characters.
If you would like a blank space in the label name,
you must choose the empty space from the list of
characters.
This TV will allow you to view the digital signal
meter for digital channels.
Repeat steps 2-3 for other channel.You can
assign a label to each channel.
4
5
1
2
Select “Channel ⇒ DTV Signal”, then press or
ENTER.
When you finish inputting the label name, press
The digital signal strength screen will appear.
EXIT to return to the normal screen.
If necessary, adjust the direction of the antenna to
obtain the maximum signal strength.
To clear a Ch Label
After step 2 above, press
or
to select “Label
CH
DTV Signal
Clear”, then press or ENTER.
NOTE:
• The channel labels will be reset after “Automatic
Search” on page 18.
0
50
100
Signal Level
Labeling video inputs
NOTE:
The Video Label feature allows you to label each
input source for your TV.
• Signal meter feature is not available for analog
channels.
• After 240 seconds, DTV Signal screen will return to
normal TV operation automatically.
Select “Setup ⇒ Video Label”, then press or
1
2
ENTER.
Press
or
to select an input which you want
to label.
Labeling channels
3
Press or to select the desired label for that
input source.
Channel label appear with the channel number
display each time you turn on the TV, select a
channel, or press DISPLAY.
Video Label
You can choose any four characters to identify a
channel.
Video
-
-
-
-
Component
HDMI
To create channel labels
PC
Select “Channel ⇒ Ch Label”, then press or
1
2
ENTER.
– / VCR / DVD / STB / Cable / Satellite / Receiver /
Game / Camcorder / PC / DVI PC / Blu-ray
Press or to select a channel you want to label,
then press
CH
.
Ch Label
Channel Number
Ch Label
15-1
CH-1
>>
Label Clear
3
Press or repeatedly until the character you
want appears in the first space.
CH
Ch Label
Channel Number
15-1
CH-1
>>
Ch Label
Label Clear
The characters rotation as follows:
, () @ / + =
-
-
SPACE
Download from Www.Somanuals.com. All Manuals Search And Download.
19 EN
When you select TV-Y7, TV-PG, TV-14 or TV-MA,
Setting the V-Chip
press DISPLAY to explain the rating.
Genre:
An age limitation can be set to restrict children from
viewing or hearing violent scenes or pictures that you
may choose to exclude. The restriction applies to “TV
Rating” and “Movie Rating” if this data is transmitted.
You may set this restriction separately. To use the
V-Chip function, you must register a password.
D
L
: Dialogue
: Language
: Sex
S
V
:Violence
FV
: Fantasy Violence
Movie Rating
To register a password
Movie Rating
1
Select “Lock”, then press or ENTER.
G
PG
PG-13
R
Select and enter your password (4 digits) using
2
Number buttons (0-9), then press ENTER.
NC-17
X
Lock
_
New Password
* * *
G
: All ages
: Parental guidance
PG
PG-13 : Parental guidance less than 13 years old
“
” appears instead of the number.
R
: Under 17 years old parental guidance
suggested
Enter the same password again to confirm, then
press ENTER.
3
NC-17 : 17 years old and above
The password is now registered.
X
: Adult only
NOTE:
Press
/
to select the desired rating, then
4
5
press ENTER.
• If you forget the password, contact Customer
Service at 1-800-289-0980 for assistance.
Your original remote control will be required.
• To avoid forgetting the password, write it down and
keep in a safe place.
Press EXIT to return to the normal screen.
V-Chip function is activated now.
NOTE:
• The V-Chip function is activated only on programs
and input sources that include a rating signal.
How to enter the V-Chip menu
1
Select “Lock” menu, then press or ENTER.
To change the password
Use Number buttons (0-9) to enter your
2
In the V-Chip menu, press
or
to select
1
password, then press ENTER. The V-Chip menu
“Change Password”, then press or ENTER.
will appear.
The Change Password screen will appear.
To set the V-Chip
Enter a new password using Number buttons
2
3
(0-9), then press ENTER.
1
In the V-Chip menu, press or to set “V-Chip”
Enter the same password again to confirm, then
press ENTER.
to “On”.
Press
or
or ENTER.
The V-Chip Set menu will appear.
to select “V-Chip Set”, then press
2
The password is now registered.
Downloading the additional V-Chip rating system
As a supplement to the standard V-Chip rating
system, your television will be able to download an
additional rating system, if such a system becomes
available in the future.
Press
or
to select which rating will be
3
used, then press or ENTER. Each rating below
will appear.
TV Rating
To download the additional V-Chip rating system
(when available)
TV Rating
TV-Y
TV-Y7
TV-G
1
2
3
In the V-Chip menu, press or to set “V-Chip”
TV-PG
TV-14
TV-MA
to “On”.
Press
or
to select “V-Chip Set (DTV)”, then
press or ENTER.
You can set the rating using age level and genre.
If the TV is not storing the additional rating
system, the TV will begin downloading it, which
may take some time to be completed.
Age:
TV-Y
: All children
TV-Y7 : 7 years old and above
Set your preferred content rating limits for the
4
5
TV-G
: General audience
additional rating system.
TV-PG : Parental guidance
TV-14 : 14 years old and above
TV-MA : 17 years old and above
You also need “Update” procedure to update
rating information.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN 20
NOTE:
NOTE:
• You can only download the additional V-Chip rating
system when your TV is receiving a digital signal.
• When you download the additional rating system, it
may take some time for the download to occur.
• The V-Chip rating information and system are not
determined or controlled by the TV.
• Depending on the broadcast signal, some
Analog Captions will function with a Digital
broadcast signal. This step prevent that two
kind of captions are overlapping.
NOTE:
• The standard V-Chip rating system is available
whether your TV is receiving a digital signal or not,
and will block both analog and digital programs. To
set the restriction level using the standard V-Chip
rating system, select “V-Chip Set” in step 2.
• The downloadable V-Chip rating system is an
evolving technology, and availability, content, and
format may vary.
• If the program or video you selected is not closed-
captioned, no captions will display on-screen.
• If text is not available in your viewing area, a black
rectangle may appear on-screen. If this happens,
set the CC Setting to “Off”.
• When selecting Closed Captions, the captioning will
be delayed approx. 10 seconds.
•
If no caption signal is received, no captions will appear,
but the television will remain in the Caption mode.
• You cannot select this feature if the TV is not
receiving a digital signal for the current station.
• Misspellings or unusual characters may
occasionally appear during Closed Captioning.
This is normal with Closed Captioning, especially
with live programs. This is because during live
programs, captions are also entered live. These
transmissions do not allow time for editing.
• When Captions are being displayed, on-screen
displays, such as volume and mute may be seen
but may interfere with Closed Captions.
To clear the all V-Chip settings
In the V-Chip menu, press
or
to select “V-
1
2
Chip Clear”, then press or ENTER.
The V-Chip Clear screen will appear.
Use Number buttons (0-9) to enter your
password, then press ENTER. All of your settings
return to the factory settings.
• Some cable systems and copy protection systems
may interfere with the Closed Captioned signal.
• If using an indoor antenna or if TV reception is very
poor, the closed caption decoder may not appear or
may appear with strange characters or misspelled
words. In this case, adjust the antenna for better
reception or use an outdoor antenna.
Closed Caption
WHAT IS CLOSED CAPTIONING?
This television has the capability to decode and
display Closed Captioned television programs.
Closed Captioning will display text on the screen
for hearing impaired viewers or it will translate and
display text in another language.
• Closed Caption menu also can be displayed by
pressing CCD on the remote control.
CC advanced
Captions: This Closed Caption mode will display
text on the screen in English or another language.
Generally, Closed Captions in English are transmitted
on C1 and Closed Captions in other languages are
transmitted on C2.
When you have selected “Custom” as the display
method, you can adjust the various setting listed
below as follows:
This feature is designed to customize Digital Caption
only.
Text: The Text Closed Caption mode will usually fill
1/2 of the screen with a programming schedule or
other information.
Select “Setup ⇒ Closed Caption”, then press or
1
ENTER.
2
Press or to set “CC Setting” to “On”.
1
Select “Setup ⇒ Closed Caption”, then press or
ENTER.
Press
or
to select “Digital CC Preset”, then
3
4
press or to select “Custom”.
Press or to set “CC Setting” to “On”.
2
Press
or
to select “CC Advanced”, then
On: Captions will be displayed on the screen.
press or ENTER.
Off: Captions will not be displayed on the screen.
The CC Advanced menu will appear.
Press
or
to select “Analog Caption” or
3
“Digital Caption”.
Press
or
to select the desired item, then
5
press or to change the setting.
When you select “Analog Caption”, you can
choose from C1, C2, C3, C4, T1, T2, T3 and T4.
CC Advanced
When you select “Digital Caption”, you can
Text Size
Auto
Auto
Auto
Auto
Auto
Auto
Auto
choose from CS1, CS2, CS3, CS4, CS5 and CS6.
Text Type
Text Edge
Press or to select the desired Closed Caption
4
5
Text Color
mode for both Digital and Analog Caption.
Text Opacity
Background Color
Background Opacity
Press
or
to select “CC Priority”, then press
or to select “Digital CC” or “Analog CC”.
Download from Www.Somanuals.com. All Manuals Search And Download.
21 EN
Cinema Wide1 (for 4:3 format programs)
To fill the screen, the right and left edges are
extended, however; the center of the picture remains
near its former ratio.
You can select from among the following items
and parameters.
Text Size:
Text Type:
Auto, Small, Standard, Large
The top and bottom edges of the picture may be hidden.
Auto, Style1, Style2, Style3, Style4,
Style5, Style6, Style7
Text Edge: Auto, None, Raised, Depressed,
Uniform, Left Shadow, Right
Shadow
Text Color: Auto, Black, White, Red, Green,
Blue, Yellow, Magenta, Cyan
Text Opacity: Auto, Solid, Transparent,
Cinema Wide2 (for letter box programs)
The entire picture is uniformly enlarged—it is
stretched the same amount both wider and taller
(retains its original proportion).
Translucent, Flashing
Background Auto, Black, White, Red, Green,
Color:
Blue, Yellow, Magenta, Cyan
The top and bottom edges of the picture may be hidden.
Background Auto, Solid, Transparent,
Opacity: Translucent, Flashing
NOTE:
• You cannot set both “Text Color” and “Background
Color” as a same color.
• You cannot set both “Text Opacity” and “Background
Opacity” to “Transparent”.
Cinema Wide3 (for letter box programs with
subtitles)
To fill the width of the screen, it is extended
horizontally. However; it is only slightly extended at the
top and the bottom.
Setting the picture size
You can change to a variety of picture sizes—
Natural, Cinema Wide1, Cinema Wide2, Cinema
Wide3, Full and Native.
The top and bottom edges of the picture may be hidden.
Selecting the picture size
1
Select “Picture ⇒ Picture Size”, then press or
A B C D E F G - - - - - - - - - - - - - - - -
A B C D E F G - - - - - - - - - - - - - - - - - - - - - - - - - -
ENTER to display “Picture Size” menu
.
Press
or
or corresponding Number buttons
2
Full (for 16:9 source
programs)
Full will display the picture at the
maximum size.
(0-4) to select the desired picture size, as described
below.
Picture Size
0.Natural
Native (for PC mode only)
Detects the resolution of the
signal of the image and it will be
shown on the screen with same
amount of pixels.
1.Cinema Wide1
2.Cinema Wide2
3.Cinema Wide3
4.Full
NOTE:
NOTE:
• Some High Definition and/or Digital broadcasts may
not allow you to change the picture size.
• In HDMI or COMPONENT mode with a scanning
rate of 720p, 1080i or 1080p (HDMI only) only the
Cinema Wide2 and Full picture size feature are
available.
• Selectable picture sizes may vary depending on the
input source or broadcast signal.
• Picture Size menu also can be displayed by
pressing PICTURE SIZE on the remote control.
Natural
• In PC mode, only the Natural, Full and Native
picture size features are available. In PC mode
(WXGA), only the Full and Native picture size
features are available.
In some cases, this image will
display the size of standard
4:3 with a black side bar.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN 22
To delete the recorded program
Disconnect the USB memory, record another
program, or turn off the TV.
Time Shift
You can record a digital program by using the
USB memory drive. This function is for your
convenience, and allows you to pause/record a
live program for a period of time based on the
size of the USB drive inserted.
Note:
• Time shift does not work for ATV or external inputs. If you
change the signal while recording a program, it will stop.
• During Play view mode, ATV channel select or input select
will not work.
• Time shift recordable time is approximately 10 minutes
per 1 GB for HD or 30 minutes for SD (depending on the
programs).
Note: The connected USB device must;
• Have a minimum approx. 100 MB of memory (32 GB
max.).
• You cannot watch the recorded program on a PC or other
device.
• Formatted as FAT16/32.
• Have a write speed higher than 40Mb/sec.
• Contain no other files.
• All of the USB memory may not be able to be used.
• We will accept no responsibility whatsoever for loss of files
on USB devices caused by connection to this unit.
• Do not use USB extension cable.
Preparation:
Plug-in an external storage device into USB port.
• To start recording, press (PAUSE).The recording
will start and the picture will be paused.
• To view a live program press (STOP). The paused
picture goes back to a live program and recording
continues.
• To stop recording, press ■ (STOP) again during
viewing a live program with recording.
• To start playback, press (PLAY).The recorded
program starts playback.
If you want to watch the program while recording,
press
(PLAY).
You can watch the recorded program while
recording the current program.
• To pause the playback picture, press (PAUSE).
• To stop the playback, press (STOP).
•
To fast forward or fast reverse, press
(SKIP) or
(SKIP).
USB status display
Press DISPLAY while watching a DTV channel, or
press the Time Shift operation buttons. The status
display will appear.
Playback status :
(PLAY), (STOP), (PAUSE),
(SKIP),
(SKIP)
Delayed time from the current program
or Playing time in the play mode.
• If there are no recorded program in
the USB memory, --:--:-- will appear
Recording
USB Memory Information
●
▶
Delay Time : 00:02:09
Message: Now Play View
Message display
• Now Live View... Viewing live program
• Now Play View... Viewing recorded program
• Now Pause View... Pausing the program
• Not Available... Inhibited function
• USB Memory is full...Caution of available USB memory
less than 100MB (Insufficient USB free space...will show
when (PAUSE) is pressed).
• No Data... When you press
(PLAY) and there are no
data recorded in the USB memory
•
USB Memory is unplugged... USB memory is not connected
Download from Www.Somanuals.com. All Manuals Search And Download.
23 EN
Reception disturbances
Most types of television interference can be remedied by adjusting the height and position of the VHF/
UHF antenna. Outdoor antennas are recommended for best results. The most common types of television
interference are shown below. If one of these symptoms appear when the TV is connected to a Cable TV
system, the disturbance may be caused by the local Cable TV company broadcast.
IGNITION
Black spots or horizontal streaks may appear, the picture may flutter or
drift. Usually caused by interference from automobile ignition systems,
neon lamps or AC powered tools and appliances such as drills or hair
dryers.
GHOSTS
Ghosts are caused by the television signal following two paths. One is the
direct path and the other is reflected by tall buildings, hills or other large
objects. Changing the direction or position of the antenna may improve
the reception.
SNOW
If the TV is located far from the TV station, in a fringe reception area where
the signal is weak, small dots may appear in the picture.
If the signal is extremely weak, the installation of a larger external antenna
may be necessary.
RADIO FREQUENCY INTERFERENCE (RFI)
Caused by two-way radios, this type of interference produces moving
ripples or diagonal streaks in the picture. Some cases may cause a loss of
contrast in the picture. Changing the direction and position of the antenna
or installing an RFI filter may improve the picture.
PICTURE SIZE VARIATION
A slight picture size variation is normal when you adjust the CONTRAST or
BRIGHTNESS settings.
CARE AND MAINTENANCE
To prevent fire or shock hazard, disconnect the TV from the power source before cleaning.
The finish on the cabinet may be cleaned with mild soap and a soft, damp cloth and cared for as other furniture.
Use caution when cleaning or wiping the plastic parts.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN 24
Troubleshooting
Use the following checklist for troubleshooting if you have problems with your TV. Consult your local dealer or
service outlet if problems persist. Be sure all connections are properly made when using with other units.
SYMPTOMS
POSSIBLE SOLUTIONS
SYMPTOMS
POSSIBLE SOLUTIONS
Digital
• Make sure the power cord is plugged in.
broadcasting
screen
• Try another AC outlet.
• Check digital signal strength.
TV does not
operate.
• Power is off, check fuse or circuit breaker.
• Unplug unit for an hour, then plug it back
in.
problem.
• Check all Cable TV connections.
• Set Signal Type menu option to the
Cable mode.
• Station or Cable TV experiencing
problems, tune to another station.
• Check sound adjustments (VOL +/- or
MUTE).
No CATV
reception.
• Station or Cable TV system problems,
Poor sound
or no sound.
try another station.
• Check for sources of possible
interference.
• Check antenna connections, adjust or
re-direct antenna.
Horizontal or
diagonal bars
on screen.
• Check for sources of possible
interference.
• Station or Cable TV experiencing
problems, tune to another station.
• Make sure channels are set into memory.
• Make sure Signal Type option is in the
No reception
above
Poor picture • Check antenna or Cable TV
appropriate mode.
or no picture.
connections, adjust antenna.
• Check for sources of possible
interference.
• If using antenna, check UHF antenna
connections.
channel 13.
• Batteries are weak, dead or inserted
• Check picture control adjustments.
incorrectly.
• Station or Cable TV experiencing
problems, tune to another station.
• Make sure channels are set into memory.
• Station is weak, adjust antenna to
receive desired station.
• Remote is out of range, move closer to
TV (within 15 feet).
No Remote
operation.
Poor
• Make sure Remote is aimed at sensor.
• Confirm there are no obstructions
between the Remote and the TV.
• Make sure the power cord is plugged in.
reception on
some
channels.
• Check for sources of possible
interference.
• Sleep Timer is set.
TV shuts off.
• Station or Cable TV experiencing
problems, tune to another station.
• Make sure channels are set into memory.
• Power interrupted.
• TV station experiencing problems or
program tuned is not closed captioned.
Try another channel.
Poor color or • Check picture control adjustments.
Closed
no color.
• Check antenna or Cable TV
connections, adjust antenna.
• Check for sources of possible
interference.
Caption is not
activated.
• Check Cable TV connection or VHF/UHF
antenna, reposition or rotate antenna.
• Set closed caption decoder in the menu.
TV is not
• Station or Cable TV experiencing
problems, tune to another station.
• Make sure channels are set into memory.
• Cable TV company is scrambling signal.
• Adjust antenna.
• Select proper language in the menu
options.
shown in your
language.
Picture
wobbles or
drifts.
BLOCK NOISE / PICTURE FREEZE
Block noise or picture freeze may appear on the screen caused by weak signals, interference from automobile
ignition systems, neon lamps or AC powered tools and appliances such as drills or hair dryers.
FOR CUSTOMER SERVICE, ADDITIONAL SET-UP AND OPERATING ASSISTANCE, OR TO ORDER ACCESSORIES PLEASE CALL:
1-800-289-0980
WHEN CALLING CUSTOMER SERVICE – PLEASE HAVE YOUR MODEL NUMBER READY
OR WRITE TO:
ORION SALES, INC.
3471 N. UNION DR.
OLNEY, ILLINOIS 62450
FOR INFORMATION ON OUR OTHER PRODUCTS, TO ORDER ACCESSORIES ONLINE,
OR FOR RECYCLING INFORMATION, PLEASE VISIT OUR WEBSITE AT
Download from Www.Somanuals.com. All Manuals Search And Download.
25 EN
Specifications
GENERAL
Power supply:
AC 120V, 60Hz
Power consumption:
Operation: 37W
Stand by: 0.3W
3.6 kg (8.0 lbs)
Width: 550mm (21-21/32 inches)
Height: 361mm (14-15/64 inches)
Depth: 137mm (5-25/64 inches)
5˚C - 40˚C
Less than 80% RH
Weight:
Dimensions:
Operating temperature:
Operating humidity:
Type:
Display method:
Number of Pixels:
Broadcasting system:
599.4mmV (class 24 inches/23.6 inches diagonal)
Transmission TFT color LCD panel
1366 (H) × 768 (V)
US System M
ATSC standard (8VSB), QAM
Receiving channels:
VHF
2-13
UHF
14-69
CATV 14-36 (A)-(W)
37-59 (AA)-(WW)
60-85 (AAA)-(ZZZ)
86-94 (86)-(94)
95-99 (A-5)-(A-1)
100-135 (100)-(135)
01 (4A)
Tuner type:
Inputs:
Frequency synthesized
Video: (RCA) 1 V (p-p), 75 ohms
Audio:
(RCA) –8 dBm/50k ohms
Component video:
(Y) 1 V (p-p), 75 ohms
(Pb)/(Pr) 0.7 V (p-p), 75 ohms
HDMI: HDMI compliant (type A connector)
HDCP compliant
E-EDID compliant
Suggested scan rates: 480i, 480p, 720p,1080i,1080p
HDMI Audio: 2-channel PCM
32/44.1/48 kHz sampling frequency
16/20/24 bits per sample
PC Monitor: Mini-Dsub 15pin
Antenna:
VHF/UHF In 75 ohms coaxial
Output:
Speakers:
Audio output power:
ACCESSORIES
Digital audio out:
0.5 V (p-p), 75 ohms terminated
25.4 mm × 68.6 mm (1 inch × 2-11/16 inches), 8 ohms × 2
2.0W + 2.0W
Remote control
Batteries (AAA) × 2
Stand
Screws 4×16mm(5/32 × 5/8 inches) × 3
Designs and specifications are subject to change without notice.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN 26
limited
WARRANTY
24” CLASS LED-LCD HDTV
ORION warrants this product to be free from manufacturing defects in material and workmanship under
normal use and conditions for a period of 1 year from date of original purchase in the United States.
Should service be necessary under this warranty for any reason due to a manufacturing defect or
malfunction during the first 12 months from date of original purchase, ORION will provide carry-in service only by
an ORION authorized Independent Service Center at no charge. Also, if an original part fails due to manufacturing
defect in material and workmanship within one year from date of original purchase we will replace the defective
part, provided the defect or malfunction is verified along with dated proof of purchase.
There are ORION authorized Independent Service Centers located throughout the country. For the one
be liable for damages incurred in shipment of the unit. If there are no ORION authorized Independent Service
Centers in your area please call - 1-888-296-7466 for assistance.
Note:This warranty is void if the product is:
(a) Damaged through negligence, misuse, abuse, or accident.
(b) Used in a commercial application or rentals.
(c) Modified or repaired by anyone other than an Independent Service Center authorized by ORION to effect
warranty repairs to the class of product or by the ORION Factory Service Center.
(d) Damaged because it is improperly connected to the equipment of other manufacturers.
This warranty does not cover:
(a) Damage to equipment not properly connected to the product.
(b) Costs incurred in the shipping of the product to an ORION authorized Independent Service Center or
ORION Factory Service Center.
(c) Damage or improper operation of unit caused by customer abuse, misuse, negligence, or failure to follow
operating instructions provided with the product.
(d) Ordinary adjustments to the product which can be performed by customer as outlined in the owner’s
manual.
(e) Signal reception problems caused by external antenna or cable systems.
THIS WARRANTY IS NON TRANSFERABLE AND APPLIES ONLY TO THE ORIGINAL PURCHASER
AND DOES NOT EXTEND TO SUBSEQUENT OWNERS OF THE PRODUCT. ANY APPLICABLE IMPLIED
WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY, ARE LIMITED IN DURATION TO A
PERIOD OF THE EXPRESS WARRANTY AS PROVIDED HEREIN BEGINNING WITH THE DATE OF ORIGINAL
PURCHASE AT RETAIL AND NO WARRANTIES, WHETHER EXPRESS OR IMPLIED SHALL APPLY TO THIS
PRODUCT THEREAFTER. ORION MAKES NO WARRANTY AS TO THE FITNESS OF THE PRODUCT FOR
ANY PARTICULAR PURPOSE AND USE.
UNDER NO CIRCUMSTANCES SHALL ORION BE LIABLE FOR ANY LOSS, DIRECT, INDIRECT,
INCIDENTAL, SPECIAL, OR CONSEQUENTIAL DAMAGE ARISING OUT OF OR IN CONNECTION WITH THE
USE OF THIS PRODUCT.
THIS WARRANTY IS VALID ONLY IN THE UNITED STATES OF AMERICA. THIS WARRANTY GIVES YOU
SPECIFIC LEGAL RIGHTS, HOWEVER, YOU MAY HAVE OTHER RIGHTS WHICH MAY VARY FROM STATE
TO STATE. SOME STATES DO NOT ALLOW LIMITATION ON IMPLIED WARRANTIES OR EXCLUSION OF
CONSEQUENTIAL DAMAGE, THEREFORE THESE RESTRICTIONS MAY NOT APPLY TO YOU.
ORION SALES, INC.
3471 N. UNION DR.
OLNEY, ILLINOIS 62450
Download from Www.Somanuals.com. All Manuals Search And Download.
27 EN
|