Sansui CRT Television SLED3200 User Guide

OWNER’S MANUAL  
GUIDE D’UTILISATION  
32” CLASS LED-LCD HDTV  
LED-LCD HDTV CATÉGORIE 32 PO  
SLED3200  
SLED3200A  
ATTENTION  
ATTENTION  
If you purchase a universal remote control from your local retailer, please contact the remote manufacturer for the  
required programming code.  
Si vous utilisez avec cet appareil une télécommande universelle (autre que celle vendue avec ce téléviseur),  
consultez la documentation accompagnant la télécommande universelle afin de connaître le code numérique cor-  
respondant au téléviseur.  
AIR/CABLE MODE SELECTION  
SÉLECTION DU MODE AIR/CABLE  
When shipped from the factory, the Signal Type option is set to the “Cable” (Cable Television) mode.  
If not using Cable TV, set this menu option to the “Air” position.  
Lorsque l’appareil sort de l’usine, l’option Signal Type est en mode « Cable » (câblodistribution). Si vous  
n’utilisez pas la câblodistribution, sélectionnez l’option « Air ».  
IF CONTACT WITH CUSTOMER SERVICE IS REQUIRED  
PLEASE HAVE THE MODEL NUMBER READY PRIOR TO THE CALL.  
SI VOUS DEVEZ COMMUNIQUER AVEC LE SERVICE CLIENTÈLE, PRENEZ NOTE  
DU NUMÉRO DE MODÈLE AVANT D’APPELER.  
CUSTOMER SERVICE – 1-800-289-0980  
SERVICE/SERVICE CLIENTÈLE: 1-800-289-0980  
ORION WEBSITE  
SITE WEB ORION  
FOR INFORMATION ON OUR OTHER PRODUCTS, TO ORDER ACCESSORIES ONLINE,  
OR FOR RECYCLING INFORMATION, PLEASE VISIT OUR WEBSITE AT  
POUR OBTENIR DES INFORMATIONS SUR NOS AUTRES PRODUITS, POUR COMMANDER DES ACCESSOIRES,  
OU LE RECYCLAGE, VEUILLEZ VISITER NOTRE SITE WEB:  
Before operating the unit, please read this manual thoroughly.  
Avant de faire fonctionner l’appareil, veuillez lire le présent guide attentivement.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFETY INSTRUCTIONS  
15) Apparatus should not be exposed to dripping or splashing, and objects filled with liquids, such as  
vases, should not be placed on the apparatus.  
16) An outside antenna system should not be located in the vicinity of overhead power lines or other  
electric light or power circuits, or where it can fall into such power lines or circuits. When installing an  
outside antenna system, extreme care should be taken to keep from touching such power lines or  
circuits, as contact with them might be fatal.  
17) Do not overload wall outlets and extension cords, as this can result in a risk of fire or electric shock.  
18) Do not push objects through any openings in this unit, as they may touch dangerous voltage points  
or short out parts that could result in fire or electric shock. Never spill or spray any type of liquid into  
the unit.  
19) If an outside antenna or cable system  
is connected to the unit, be sure the  
antenna or cable system is grounded  
to provide some protection against  
voltage surges and built-up static  
EXAMPLE OF ANTENNA GROUNDING AS PER THE NATIONAL ELECTRICAL CODE  
ANTENNA LEAD IN WIRE  
GROUND  
CLAMP  
ANTENNA  
DISCHARGE UNIT  
(NEC SECTION 810-20)  
charges, Section 810 of the National  
Electrical Code, ANSI/NFPA 70, provides  
information with respect to proper  
grounding of the mast and supporting  
structure, grounding of the lead-in  
wire to an antenna discharge unit, size  
of grounding conductors, location of  
antenna discharge unit, connection to  
ELECTRIC SERVICE  
EQUIPMENT  
GROUNDING CONDUCTORS  
(NEC SECTION 810-21)  
GROUND CLAMPS  
NEC-NATIONAL ELECTRICAL CODE  
S2898A  
POWER SERVICE GROUNDING  
ELECTRODE SYSTEM  
(NEC ART 250, PART H)  
grounding electrodes, and requirements for the grounding electrode.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3 EN  
IMPORTANT SAFETY INSTRUCTIONS  
20) When replacement parts are required, be sure the service technician uses replacement parts  
specified by the manufacturer or those that have the same characteristics as the original part.  
Unauthorized substitutions may result in fire, electric shock or other hazards.  
21) Upon completion of any service or repairs to this unit, ask the service technician to perform safety  
checks to determine that the unit is in proper operating condition.  
22) When you connect the product to other equipment, turn off the power and unplug all of the  
equipment from the wall outlet. Failure to do so may cause an electric shock and serious personal  
injury. Read the owner's manual of the other equipment carefully and follow the instructions when  
making any connections.  
23) Sudden high volume sound may cause hearing or speaker damage. When you use headphones,  
(if the unit is equipped with a headphone jack) keep the volume at a moderate level. If you use  
headphones continuously with high volume sound, it may cause hearing damage.  
24) Do not allow the product to output distorted sound for an extended period of time. It may cause  
speaker overheating and fire.  
25) This reminder is provided to call the cable TV system installer’s attention to Article 820-40 of the  
NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground  
shall be connected to the grounding system of the building, as close to the point of cable entry as  
practical.  
26) The socket-outlet must be installed near the unit and easily accessible.  
CHILD SAFETY:  
It Makes A Difference How and Where You Use Your Flat Panel Display  
Congratulations on your purchase! As you enjoy your new product, please keep these safety tips in mind:  
THE ISSUE  
The home theater entertainment experience is a growing trend and larger flat panel displays are popular  
purchases. However, flat panel displays are not always supported on the proper stands or installed  
according to the manufacturer’s recommendations.  
Flat panel displays that are inappropriately situated on dressers, bookcases, shelves, desks, speakers,  
chests or carts may fall over and cause injury.  
THIS MANUFACTURER CARES!  
The consumer electronics industry is committed to making home entertainment enjoyable and safe.  
TUNE INTO SAFETY  
One size does NOT fit all. Follow the manufacturer’s recommendations for the safe installation and use of  
your flat panel display.  
Carefully read and understand all enclosed instructions for proper use of this product.  
Don’t allow children to climb on or play with furniture and television sets.  
Don’t place flat panel displays on furniture that can easily be used as steps, such as a chest of drawers.  
Remember that children can become excited while watching a program, especially on a “larger than life” flat  
panel display. Care should be taken to place or install the display where it cannot be pushed, pulled over, or  
knocked down.  
Care should be taken to route all cords and cables connected to the flat panel display so that they cannot be  
pulled or grabbed by curious children.  
WALL MOUNTING: IF YOU DECIDE TO WALL MOUNT YOUR FLAT PANEL DISPLAY, ALWAYS:  
Use a mount that has been recommended by the display manufacturer and/or listed by an independent  
laboratory (such as UL, CSA, ETL).  
Follow all instructions supplied by the display and wall mount manufacturers.  
If you have any doubts about your ability to safely install your flat panel display, contact your retailer about  
professional installation.  
Make sure that the wall where you are mounting the display is appropriate to support the weight of the unit/  
product and wall mount. If you are unsure, contact a professional installer.  
A minimum of two people are required for installation. Flat panel displays can be heavy.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN 4  
IMPORTANT SAFETY INSTRUCTIONS  
CONDENSATION  
Moisture will form in the operating section of the unit if the unit is brought from cool surroundings into a warm  
room or if the temperature of the room rises suddenly. When this happens, unit's performance will be impaired.  
To prevent this, let the unit stand in its new surroundings for about an hour before switching it on, or make sure  
that the room temperature rises gradually.  
Condensation may also form during the summer if the unit is exposed to the breeze from an air conditioner. In  
such cases, change the location of the unit.  
HOW TO HANDLE THE LCD PANEL  
• Do not press hard or jolt the LCD panel. It may cause the LCD panel glass to break and injury may occur.  
• If the LCD panel is broken, make absolutely sure that you do not touch the liquid in the panel. This may cause  
skin inflammation.  
If the liquid gets in your mouth, immediately gargle and consult with your doctor. Also, if the liquid gets in your  
eyes or touches your skin, consult with your doctor after rinsing for at least 15 minutes or longer in clean water.  
Possible Adverse Effects on LCD Panel: If a fixed (non-moving) pattern remains on the LCD Panel for  
long periods of time, the image can become permanently engrained in the LCD Panel and cause subtle but  
permanent ghost images. This type of damage is NOT COVERED BY YOUR WARRANTY. Never leave your  
LCD Panel on for long periods of time while it is displaying the following formats or images:  
• Fixed images, such as stock tickers, video game patterns, TV station logos, and websites.  
• Special formats that do not use the entire screen. For example, viewing letterbox style (16:9) media on  
a normal (4:3) display (black bars at top and bottom of screen); or viewing normal style (4:3) media on a  
widescreen (16:9) display (black bars on left and right sides of screen).  
The following symptoms are not signs of malfunction but technical limitation. Therefore we disclaim any  
responsibility for these symptoms.  
• LCD Panels are manufactured using an extremely high level of precision technology, however sometimes  
parts of the screen may be missing picture elements or have luminous spots.  
This is not a sign of a malfunction.  
• Do not install the LCD Panel near electronic equipment that produces electromagnetic waves. Some  
equipment placed too near this unit may cause interference.  
• Effect on infrared devices – There may be interference while using infrared devices such as infrared cordless  
headphones.  
SAFETY PRECAUTIONS  
The unit emits heat when in operation. Do not place any covers or blankets on the unit, this may cause overheating.  
Do not block ventilation holes, or set up near radiators. Do not place in direct sunshine. When placing on a shelf leave 4 inches  
(10 cm) free space around the entire unit.  
10cm  
10cm  
Notes when mounting the TV on a wall  
If the unit is to be mounted on the wall, contact the retailer where you  
purchased the TV for advice, and have the equipment professionally  
installed. Incomplete or improper installation may cause injury to you,  
and/or damage to the TV.  
Bracket holes:To attach a wall mounting bracket (not supplied) attach  
where indicated in the drawing right.  
This manufacturer recommends professional installation.  
Utilize an appropriate bracket and fasteners, sufficient to  
accommodate the size and weight of the unit.  
Bracket holes  
Assure the wall to which the unit is to be mounted will safely support  
the size and weight of the unit, using the bracket and fasteners you  
have selected.  
Keep cords and cables connected to this flat panel display out of  
reach of children.  
To hang the television on a wall, remove these screws and then  
remove a stand. Before performing work spread cushioning over the  
base area to lay the TV on.  
Before wall-mounting, please check carefully the location of the TV’s  
mounting-holes.  
Screws  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5 EN  
How to attach the stand  
NOTE:  
• Unplug the AC cord from the wall outlet.  
• Before beginning this process, assure that the TV is laid on a clean, safe, and cushioned surface to avoid  
any damage to the unit.  
• Do not touch or press the TV-screen, glass might break under pressure.  
Place the TV on its front onto a table.  
Align the stand’s bottom-plate (supplied) as seen here.  
It will t in only one direction.  
Hold the unit and attach the stand slowly, as shown in gure 1.  
LCD PANEL SIDE  
Figure 1  
Figure 2  
Finally secure the bottom-plate with 4 screws (supplied) (4x16mm (5/32x5/8 inches)) as indicated by the arrows  
in figure 2.  
• Be sure to follow the instructions. Insufficient tightening or incorrect installation of the stand will not support  
your unit correctly, and could result in damage or injury from tip-over.  
How to remove the stand  
When you transport this product, remove the stand and pack at against the back of the unit in the carton. To  
remove the stand, perform these steps in reverse order.  
For wall mounting, the base must be removed. To disconnect the base/stand remove the 4 screws from the back  
(see page 5).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN 6  
Features  
• Integrated Digital Tuner - You can view digital broadcasts without using a Digital TV Set-Top Box.  
• Closed Caption Decoder With Full Text Mode - Displays text captions or full screen text on the screen for  
hearing impaired viewers.  
• Picture Adjustments Using The Remote Control - The On-Screen display allows precise remote control  
adjustment of BRIGHTNESS, CONTRAST, COLOR, TINT and SHARPNESS.  
• Programmable TV Sleep Timer - Operable from the remote control, the TV can be programmed for up to  
120 minutes to turn off automatically.  
• V-Chip - The V-Chip function can read the rating of a broadcast program or movie content if the program is  
encoded with this information. V-Chip will allow you to set a restriction level.  
• Digital Audio Jack (Coaxial) - When a component with a built-in Dolby Digital decoder is connected, Dolby  
Digital sound can produce the effect of being in a movie theater or a concert hall.  
• HDMI/Component Video Jacks - A VCR, DVD player, satellite receiver or other audio/video component can  
be connected to this unit.  
• On-Screen 3 Languages Display - You can select one of 3 languages, English, French or Spanish for on-  
screen programming.  
* Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of  
Dolby Laboratories.  
* The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or  
registered trademarks of HDMI Licensing LLC in the United States and other countries.  
Power source  
TO USE AC POWER SOURCE  
Use the AC polarized line cord provided for operation on AC. Insert the AC cord plug into a standard 120V 60Hz  
polarized AC outlet.  
AC Outlet  
Wider Hole and Blade  
Polarized AC Cord Plug  
(One blade is wider than the other.)  
NOTE:  
• Never connect the AC line cord plug to other than the specified voltage (120V 60Hz).  
Use the attached power cord only.  
• If the polarized AC cord does not fit into a non-polarized AC outlet, do not attempt to file or cut the blade.  
It is the user’s responsibility to have an electrician replace the obsolete outlet.  
• If you cause a static discharge when touching the unit and the unit fails to function, simply unplug the unit from  
the AC outlet and plug it back in. The unit should return to normal operation.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7 EN  
Contents  
Before using your unit  
IMPORTANT SAFETY INSTRUCTIONS...........3  
SAFETY PRECAUTIONS .................................5  
How to attach the stand ....................................6  
How to remove the stand ..................................6  
Features............................................................7  
Power source....................................................7  
Contents ...........................................................8  
Parts and functions ...........................................9  
Remote control ...............................................10  
Antenna connections ......................................11  
Cable TV connections.....................................11  
Connections to other equipment.....................12  
TV operation  
Starting setup .................................................15  
TV operation ...................................................15  
Quick guide for menu operation......................16  
Convenience functions ...................................17  
Memorizing channels......................................18  
Checking the digital signal strength ................19  
Labeling channels...........................................19  
Labeling video inputs......................................19  
Setting the V-Chip ...........................................20  
Closed Caption...............................................21  
CC advanced..................................................21  
Setting the picture size....................................22  
Time Shift........................................................23  
Additional information  
Reception disturbances ..................................24  
Troubleshooting ..............................................25  
Specifications ................................................26  
limited WARRANTY ........................................27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN 8  
Parts and functions  
Front  
Right side  
INPUT/ENTER button  
CH (CHANNEL)  
/
buttons  
VOL (VOLUME)  
+/– buttons, MENU  
button  
POWER button  
Remote sensor  
To display the menu screen.  
Press hold VOL (VOLUME) +/simultaneously  
about 1 second the menu will be appear.  
Power Indicator  
Red : Standby  
Green : On  
CH (CHANNEL)  
/
buttons, VOL (VOLUME)  
+/buttons and INPUT/ENTER button can be  
used to select the desired setting during the menu  
screen operations.  
PC MONITOR IN jack  
PC/DVI AUDIO IN jack  
DIGITAL AUDIO COAXIAL OUT jack  
Right side  
Rear  
COMPONENT IN jacks  
VIDEO2 IN jacks  
(VIDEO/AUDIO (L/R))  
ANT. (RF) IN jack  
HDMI2 IN jack  
HDMI1/DVI IN jack  
USB INPUT  
VAR.(VARIABLE) AUDIO (L/R) OUT jacks  
VIDEO1 IN (VIDEO/AUDIO (L/R)) jacks  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9 EN  
Remote control  
6.CURSOR ///Buttons - Use to operate the  
12  
13  
menu functions of the TV.  
1
2
7.ENTER Button - Use to enter or select  
information for On-Screen operations.  
8.MUTE Button - To turn off the sound, press this  
button once. The TV will be silenced and the  
symbol “Mute” will appear on the screen. The  
muting feature can be released by pressing the  
MUTE button again or one of the VOL (VOLUME)  
+ or buttons.  
3
4
5
14  
15  
9.VOL (VOLUME) + / Buttons - Press the +  
button to increase, or the button to decrease the  
sound level.  
6
7
16  
8
10.INPUT SELECT Button - Use to change the  
external input.  
11.CCD Button - Use to display the Closed Caption  
17  
18  
9
menu screen.  
10  
11  
12.SLEEP Button - To set the TV to turn off after a  
preset amount of time, use the SLEEP button on  
the remote control.  
13.PICTURE SIZE Button - Use to change the  
picture size.  
1.  
POWER Button - Use to turn the power on/off  
14.RECALL Button - This button allows you to go  
back to the previous channel selected by just  
pressing the RECALL button. Press this button  
again to return to the channel you were watching.  
to the TV.  
2.DISPLAY Button - When you press this button,  
the current information will be displayed on a  
screen. To remove the display from the screen,  
press this button again.  
15.EXIT Button - Press to remove setup menu.  
16.AUDIO Button - Change soundtrack language.  
3.Direct Channel Selection Buttons (0-9) - Allows  
17.CH (CHANNEL)  
/
Buttons - To change the  
direct access to any channel of the TV.  
channels of the TV.  
4.Button -This button is used when selecting  
18.Time Shift control Buttons - See page 23.  
digital channels.  
5.MENU Button - Use to display the On-Screen  
menu function.  
Before using the remote control, batteries must first be installed.  
HOW TO INSTALL BATTERIES  
1. Open the battery compartment cover.  
Use two “AAA” size batteries. The batteries may last  
approximately one year depending on how much the  
remote control is used. For best performance, it is  
recommended that batteries should be replaced on a  
yearly basis, or when the remote operation becomes  
erratic. Do not mix old and new batteries or different  
types.  
BATTERY PRECAUTIONS  
2. Install two “AAA” batteries (supplied).  
3. Replace the battery compartment cover.  
These precautions should be followed when using  
batteries in this device:  
• Use only the size and type of batteries specified.  
• Be sure to follow the correct polarity when  
installing the batteries as indicated in the battery  
compartment. Reversed batteries may cause  
damage to the device.  
• Do not mix different types of batteries together (e.g.  
Alkaline and Carbon-zinc or Rechargeable) or old  
batteries with fresh ones.  
• If the device is not to be used for a long period of  
time, remove the batteries to prevent damage or  
injury from possible battery leakage.  
• Do not try to recharge batteries not intended to be  
recharged; they can overheat and rupture. (Follow  
battery manufacturer’s directions.)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN 10  
Antenna connections  
If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your  
antenna system. If you are using a Cable TV service, see “Cable TV connections”.  
Combination VHF/UHF Antenna (Single 75 ohms cable)  
Connect the 75 ohms cable from the combination  
VHF/UHF antenna to the Antenna Jack.  
Antenna  
Jack  
75 ohms  
Coaxial  
Cable  
Cable TV connections  
This TV has an extended tuning range and can tune most cable channels without using a Cable TV  
Converter box. Some cable companies offer “premium pay channels” where the signal is scrambled.  
Descrambling these signals for normal viewing requires the use of a descrambler device which is  
generally provided by the Cable TV company.  
For subscribers to basic Cable TV service  
For basic Cable TV service not requiring a Converter/  
Descrambler box, connect the 75 ohms Coaxial Cable directly  
to the Antenna Jack on the back of the TV.  
75 ohms  
Coaxial  
Cable  
Antenna  
Jack  
For subscribers to scrambled Cable TV service  
If you subscribe to a Cable TV service which requires the use of a Converter/Descrambler box, connect  
the incoming 75 ohms Coaxial Cable to the Converter/Descrambler box. Using another 75 ohms Coaxial  
Cable, connect the output jack of the Converter/Descrambler box to the Antenna Jack on the TV. Follow the  
connections shown below. Set the TV to the output channel of the Converter/Descrambler box (usually channel  
3 or 4) and use the Converter/Descrambler box to select channels.  
Incoming  
75 ohms  
Cable TV  
Cable  
Antenna  
Jack  
75 ohms Cable to TV  
Converter/  
Descrambler  
For subscribers to unscrambled Cable TV service with scrambled premium channels  
If you subscribe to a Cable TV service in which basic channels are unscrambled and premium channels require  
the use of a Converter/Descrambler box, you may wish to use a signal Splitter and an A/B Switch box (available  
from the Cable TV company or an electronics supply store). Follow the connections shown below. With the  
switch in the “B” position, you can directly tune any nonscrambled channels on your TV. With the switch in the  
“A” position, tune your TV to the output of the Converter/Descrambler box (usually channel 3 or 4) and use the  
Converter/Descrambler box to tune scrambled channels.  
Incoming  
Converter/  
75 ohms  
Cable TV  
Cable  
Antenna  
Jack  
Descrambler  
75 ohms Cable to TV  
A
A/B Switch  
Splitter  
B
Download from Www.Somanuals.com. All Manuals Search And Download.  
11 EN  
Connections to other equipment  
The exact arrangement you use to interconnect various video and audio components to this unit is dependent  
on the model and features of each component. Check the Owner’s Manual provided with each component for  
the location of video and audio inputs and outputs.  
To connect the TV to a VCR  
VCR  
To Video/Audio OUT  
Video/Audio cord (not supplied)  
Rear of the unit  
To VIDEO/AUDIO (L/R) IN  
To connect the TV to a DVD player with Component Video Input  
You can enjoy a high quality picture by connecting the unit’s COMPONENT VIDEO OUT jacks of your DVD  
player with the component video cables (not supplied).  
Right of the unit  
To COMPONENT IN  
To AUDIO IN  
To Audio OUT  
Pr  
Pb  
Y
Audio cord (not supplied)  
DVD  
Y
Pb  
Pr  
Component video cord  
(not supplied)  
To Component OUT  
NOTE:  
• Component Video input of the unit are for use with a device which output 480i/1080i interlaced signals and  
480p/720p progressive signals.  
To connect the TV to a camcorder, or a game console  
To playback from a camcorder, connect the camcorder to the unit as shown.  
This unit can also be used as a display device for many video games. However, due to the wide variety of  
signals generated by these devices and subsequent hook-up variations required, they have not all been  
included in the suggested connection diagrams.You’ll need to consult each component’s Owner’s Manual for  
additional information.  
To Video/Audio OUT  
Rear of the unit  
or  
GAME CONSOLE  
Video/Audio cord (not supplied)  
To VIDEO/AUDIO (L/R) IN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN 12  
Connections to other equipment  
To connect an audio system  
This connection allows you to use an audio amplifier and external speakers, and adjust the audio level using the  
TV’s remote control.  
To control the audio, turn on the TV and the stereo amplifier, and turn off the TV’s built-in speakers (see page 17).  
Rear of the unit  
Amplifier  
To VAR. (VARIABLE)  
To Audio (L) Input  
To Audio (R) Input  
AUDIO (L/R) OUT  
Audio cord (not supplied)  
NOTE:  
To hear sound when using an external audio amplifier, the volume of both the TV and the amplifier must be set  
above 0 (zero).  
• For example, if the volume of the TV is set to 0, you will not be able to hear any sound, even if the volume of the  
amplifier is at its highest level.  
Using an AV Amplifier with built-in digital surround  
If you are using an AV Amplifier with built-in digital surround sound, you can enjoy various audio systems including  
Dolby Digital Surround audio that sounds just like the movie.  
Connect an AV amplifier with built-in Dolby Digital decoder, etc. as shown below.  
Front  
Speaker  
Subwoofer  
Rear of the unit  
(Right)  
TV  
Front  
Speaker  
(Left)  
To DIGITAL AUDIO  
COAXIAL OUT  
Coaxial digital cable  
(not supplied)  
To Coaxial  
Center Speaker  
Digital Audio Input  
Surround  
Speaker (Left)  
Surround  
Speaker  
(Right)  
AV Amplifier with built-in digital surround decoder  
NOTE:  
• When you are viewing digital broadcast, this unit will not work in conjunction with DTS audio or MPEG audio.  
There will be no sound output if connected to an AV amplifier with a built-in DTS decoder or MPEG decoder.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
13 EN  
Connections to other equipment  
To connect a HDMI or a DVI device to the unit  
The HDMI input receives digital audio and uncompressed video from a HDMI device or uncompressed digital  
video from a DVI device.  
When you connect to a DVI device with a HDMI-to-DVI adapter cable, it transfers only video signal. Separate  
analog audio cords required.  
Rear and Right of the unit  
To PC/DVI AUDIO IN  
HDMI cable (type A connector) To HDMI output  
(not supplied)  
HDMI device  
or  
To HDMI IN HDMI - to - DVI adapter cable  
(HDMI type A connector)  
DVI device  
(not supplied)  
Audio cord (not supplied)  
To DVI output  
NOTE:  
• When using HDMI1/DVI IN to connect your HDMI or DVI devices, you must select the corresponding  
audio input source (HDMI or DVI) on the menu screen (see page 17). Otherwise you will only see the  
image with no sound.  
To connect the TV to a PC (Personal Computer)  
BEFORE YOU CONNECT THIS TV TO YOUR PC, CHANGE THE ADJUSTMENT OF YOUR PC’S  
RESOLUTION AND REFRESH RATE (60 HZ).  
Connect one end of a (male to male) VGA cable to the video cord of the computer and the other end to the VGA  
connector PC MONITOR IN on the rear of the TV. Attach the connectors firmly with the screws on the plug. In  
case of a Multimedia computer, connect the audio cord to the audio output of your Multimedia computer and to  
the AUDIO IN connector of the PC/DVI AUDIO IN jack of the TV.You can also connect the PC with HDMI cable.  
If you use HDMI cable, you don’t have to connect the audio cord. If you use DVI-to-HDMI cable, please connect  
audio cord as same way as VGA cable.  
Press INPUT SELECT on the remote control to select PC mode.  
Switch on the computer. The TV can operate as the computer monitor.  
Rear and Right of the unit  
Monitor Display modes  
Mode Resolution Refresh rate  
VGA  
VGA  
640x480 60/ 72/ 75 Hz  
720x400 70Hz  
SVGA 800x600 56/ 60/ 72/ 75 Hz  
XGA 1024x768 60/ 70/ 75 Hz  
WXGA 1280x768 60Hz  
WXGA 1280x720 60Hz  
WXGA 1360x768 60Hz  
To  
PC/DVI  
AUDIO  
IN  
To HDMI IN  
To PC  
MONITOR  
IN  
HDMI cable (not supplied)  
VGA cable (not supplied)  
To return to normal mode  
Press INPUT SELECT again.  
Audio cord (not supplied)  
NOTE:  
• The on-screen displays will have a different appearance in PC mode than in TV mode.  
• If there is no video signal from the PC when the unit is in PC mode, “No signal” will appear on the TV-screen.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN 14  
Adjust the volume level by pressing VOL + or .  
The volume level will be indicated on the screen  
by green bars. As the volume level increases, so  
do the number of bars. If the volume decreases,  
the number of green bars also decreases.  
Set the Signal Type option to the appropriate  
position (see “Air/Cable selection” on page 18).  
Starting setup  
2
The Auto Setup menu appears the first time you  
turn on the TV, and assists you to specify the  
Air/Cable setting, and program your channels  
automatically.  
3
4
IMPORTANT: Make sure that the antenna or cable  
TV system connection is made!  
Press the Direct Channel Selection (0-9, )  
buttons to select the channel.  
(If you press only channel number, channel  
selection will be delayed for a few seconds.)  
To turn on the TV, press POWER. (POWER  
1
indicator on the front of the unit changes green.  
It may take approx. 10 seconds for a picture to  
appear on screen.) The Auto Setup function  
begins.  
TO SELECT ANALOG CHANNELS  
1-9:  
Press 1-9 as needed. Example, to  
select channel 2, press 2, then press  
ENTER.  
Auto Setup  
10-99:  
Press the 2 digits in order. Example,  
to select channel 12, press 1, 2, then  
press ENTER.  
TV Location  
Store  
E-POP Demo  
Off  
Signal Type  
Cable  
100-135: Press the 3 digits in order. Example, to  
select channel 120, press 1, 2, 0, then  
press ENTER.  
Automatic Search  
Start  
Press or to select “TV Location”, then press  
or to select “Store” or “Home”. This product  
qualifies for ENERGY STAR In Home mode  
default setting.  
2
TO SELECT DIGITAL CHANNELS  
Press the first 1-3 digits, then press the button,  
followed by the remaining number.  
Example, to select channel 15-1, press 1, 5, , 1,  
then press ENTER.  
NOTE:  
• This unit has been preset to STORE brightness.  
This setting does not qualify under ENERGY  
STAR.To reduce brightness and energy  
consumption, change setting to ‘HOME’.This  
setting does qualify under ENERGY STAR.  
• The device may not conform to the ENERGY  
STAR standard after Reset is performed or the  
Backlight is adjusted.  
• If a channel is selected with only audio content,  
“Audio only” will be displayed on the screen.  
• If a channel is selected with a weak digital  
signal, “Digital channel signal strength is low”  
will be displayed on the screen.  
The same program may be available on either  
an analog channel or a digital channel.You may  
choose to watch either format.  
Press or to select “E-POP Demo”, then press  
or to select “On” or “Off”.  
3
• If a channel is selected to which you have not  
subscribed, “Digital channel is encrypted” will  
be displayed on the screen.  
On: A TV feature introduction will be popped up  
at the bottom of the screen.  
VHF/UHF/CABLE CHANNELS  
Off: Turn off the E-POP Demo feature.  
Air  
Cable  
Press or to select “Signal Type”, then press  
4
5
6
VHF  
VHF  
or to select “Cable” or “Air”.  
2-13  
2-13  
Press or to select “Automatic Search”, then  
UHF  
STD/HRC/IRC  
press or ENTER.  
14-69  
14-36  
(A) (W)  
37-59  
60-85  
86-94  
95-99  
(AA) (WW)  
(AAA) (ZZZ)  
(86) (94)  
“Auto Setup” will begin. After the Auto Setup  
is completed, the TV channel appears on the  
screen.  
(A-5) (A-1)  
• Depending on the reception condition, it may  
take up to 30 minutes to complete memorizing  
digital cable channels. Please allow the  
process to complete without interruption.  
100-135 (100) (135)  
01  
(4A)  
NOTE:  
If a channel with no broadcast is selected, the sound will  
automatically be muted.  
NOTE:  
If you press EXIT in the process of “Auto Setup”, the Auto  
It may take a few seconds for a digital channel picture to  
Setup stops and changes to the normal screen.  
appear on screen after being selected.  
When you make a menu selection, your changes occur  
immediately.You do not have to press EXIT to see your  
changes.  
To select the video input source  
To view a signal from another device connected  
to your TV, such as a VCR player, press INPUT  
SELECT, then press or or corresponding  
Number buttons (0-6), then press ENTER.  
Input Select  
TV operation  
0.TV  
1.Video1  
2.Video2  
3.Component  
4.HDMI1  
5.HDMI2  
6.PC  
To turn on the TV, press  
(POWER  
1
POWER.  
indicator on the front of the unit changes green.  
It may take approx. 10 seconds for a picture to  
appear on screen.)  
[0-6]:Select  
Download from Www.Somanuals.com. All Manuals Search And Download.  
15 EN  
CH  
/
Quick guide for menu  
operation  
Press and release CH  
/
. The channel  
automatically stops at the next channel set into  
memory.  
For proper operation, before selecting channels, they  
should be set into the memory. See “Memorizing  
channels” on page 18.  
Call menu and for example: Select Language.  
Press INPUT SELECT to select TV mode.  
1
DISPLAY  
Press MENU. The TV menu screen will appear.  
Press DISPLAY to display the current information on  
2
the screen.  
Main Menu  
>>  
Picture  
When the TV receives a digital signal, the digital  
Audio  
CH  
Channel  
Lock  
information will appear.  
Setup  
Sleep Timer  
62-1 HDTV_Moving_Picture...  
Off  
CH-1 TV-MA  
Digital Air  
English  
No Program Information is available  
USB Memory Information  
:Select  
ENTER :Set  
Play Time  
:
--:--:--  
Press or to select “Setup”, then press or  
Message Now Live View  
:
3
4
USB Memory is unplugged  
ENTER.  
Full  
1080i  
Press or to select “Language”, then press ◀  
or to select the desired language.  
…on the following pages the menu can be called  
in the same way as here.  
• Channel number  
• Channel label (if preset) Broadcast program name  
• V-Chip rating  
• Sleep timer  
• Program guide  
• Resolution  
• Station name  
• Signal type  
• Audio language  
• Picture size  
Press EXIT to return to the normal screen.  
5
• Time Shift display  
NOTE:  
• If no buttons are pressed for more than about 60  
seconds, the menu screen will return to normal  
operation automatically.  
When the TV receives an analog signal, the analog  
information will appear.  
Sleep Timer  
Off  
14  
G
Analog Cable  
Mono  
Full  
480i  
• Channel number  
• V-Chip rating  
• Channel label (if preset)  
• Signal type  
• Sleep timer  
• Picture size  
• Audio information  
(Stereo, SAP or Mono)  
• Resolution  
Press DISPLAY again to clear the call display.  
NOTE:  
• After a few seconds, DISPLAY screen will return to  
normal TV operation automatically.  
SLEEP  
To set the TV to turn off after a preset amount of time,  
press SLEEP on the remote control. The clock will  
count up 10 minutes for each press of the SLEEP  
button (Off, 0h 10m, 0h 20m, ..., 2h 0m). After the sleep  
time is programmed, the display will appear briefly  
every ten minutes to remind you that the sleep timer  
is operating. To confirm the sleep timer setting, press  
SLEEP and the remaining time will be displayed for a  
few seconds. To cancel the sleep timer, press SLEEP  
repeatedly until the display turns to Off.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN 16  
Convenience functions  
You can change the default settings by pressing the MENU button on your remote, then select the one of the icons at the left  
of the menu - follow the On-Screen prompts to set your preferences.  
Icon  
Selected Items  
Sports  
Setup hint  
Bright and dynamic picture (factory-set)  
Picture Picture  
Preference  
Standard  
Movie  
Standard picture quality (factory-set)  
Movie-like picture setting (factory-set)  
Your personal preferences (set by you; see “Picture Setting”)  
You can adjust the picture quality to your preference.  
Memory  
Picture Setting Brightness /Contrast /  
Sharpness / Color / Tint  
Color Temperature  
Cool (Bluish) / Standard (Neutral) / Warm (Reddish)  
DBC  
On/Eco/Off  
Use this feature to change the Black level automatically according to the  
brightness of an image.The Black level will become dark in a dark scene. If “Eco”  
is selected, the power consumption is reduced and “Backlight” will be skipped.  
Backlight*2  
The Backlight feature adjusts the screen brightness for improved  
picture clarity.  
Picture Size  
Film Mode  
PC Setting  
See page 22.  
On/Off  
A smoother motion may be obtained by setting the Film Mode to “On” (480i only).  
Hor Position /  
Ver Position  
To adjust the horizontal / vertical position of the image on the PC monitor  
screen. Each video standard will require a different value for this setting.  
Clock  
Phase  
To minimize any vertical bars or stripes visible on the screen background.  
This must be adjusted after the frequency has been set optimize picture quality.  
To adjust the all PC settings automatically.  
Auto Adjust  
On/Off  
DNR  
DNR (Digital Noise Reduction) can reduce the roughness of the picture.  
Audio  
Equalizer Mode Standard/Music/Movie/ You can adjust the Equalizer Mode to your preference.  
News/Memory/Flat  
Audio Setting Bass/Treble  
You can adjust the sound quality to your preference. (Flat mode only)  
Equalizer Setting  
100Hz/250Hz/500Hz/1kHz/2kHz/4kHz/10kHz (Not available in Flat mode)  
Balance  
You can adjust the sound quality to your preference.  
MTS  
Stereo / SAP / Mono  
The multi-channel TV sound (MTS) feature provides high-fidelity  
stereo sound. MTS also can transmit a second audio program (SAP)  
containing a second language or other audio information.  
When the TV receives a stereo or SAP broadcast, the word “Stereo” or  
“SAP” displays on-screen every time you press DISPLAY.  
Surround  
On/Off  
On/Off  
The dynamic presence and sound created offers a thoroughly  
enjoyable listening experience.  
Auto Volume  
Volume level can be adjusted automatically by the sound level.  
Audio Language  
When two or more audio languages are included in a digital signal, you can select  
one of the audio languages. (This function is available only for digital broadcast.)  
HDMI1 Audio HDMI  
DVI  
When you connect the HDMI device to the TV, select this setting.  
When you connect the DVI device to the TV with analog audio cords,  
select this setting.  
Speakers  
On/Off  
Use this feature to turn the TV speakers off when you connect an audio system.  
Channel Add / Delete  
DTV Signal  
See page 18.  
See page 19.  
See page 18.  
See page 19.  
See page 20.  
See page 21.  
Auto Ch Memory  
Ch Label  
Lock  
Setup  
Closed Caption  
Language  
You can choose from three different languages (English, Français (French) and  
Español (Spanish)) for the on-screen displays.  
Select the language you prefer first, then proceed with the other menu options.  
Video Label  
On Timer  
See page 19.  
Off / 0h30m / 1h00m  
/ 1h30m / 2h00m /  
3h00m⋅⋅⋅12h00m  
You can set the On Timer to automatically turn on the TV. To cancel the  
On Timer select “Off”.  
Auto Shut  
Off*1  
On/Off  
If the Auto Shut Off feature is On, a station being viewed stops  
broadcasting and the TV is not operated, the TV will automatically shut  
itself off after 15 minutes.  
Auto Setup  
See page 15.  
Power On LED On/Off  
When you turn on the TV, Power indicator on the front of the TV will light.  
PC Standby  
On/Off  
In PC mode, if no signal is received or no operation performed for 1  
minute, the TV will turn to standby mode automatically (LED light will  
flash red). When an input signal is received or an operation performed  
on the PC, the TV will return to the On mode.  
Reset*2  
The Reset function returns your Picture/Audio settings to the factory settings.  
“Picture Size”, “MTS” , “Audio Language”, “HDMI1 Audio” and “Speakers”  
cannot be reset by this function.  
NOTE:  
1
*
*
If there is no input signal in the PC mode, after 1 minute Auto Shut Off will be activated. In PC mode the “PC Standby”  
setting takes precedence.  
2
The device may not conform to the Energy Star standard after Reset is performed or the Backlight is adjusted.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
17 EN  
Adding Channel  
Memorizing channels  
If you find a new digital channel unregistered, you can  
add the new channel into the channel memory.  
This TV is equipped with a channel memory  
feature which allows channels to skip up or down  
to the next channel set into memory, skipping  
over unwanted channels. Before selecting  
channels, they must be programmed into the  
TV’s memory. To use this TV with an antenna, set  
the Signal Type option to the Air mode. When  
shipped from the factory, this menu option is in  
the Cable mode.  
Tune in the new channel.  
1
Select “Channel Add/Delete Adding  
2
Channel”, then press or ENTER.  
CH  
Add/Delete  
Adding Channel  
Add/Delete  
Clear All  
>>  
>>  
>>  
Air/Cable selection  
The new channel will be added into the channel  
memory.  
3
Select “Channel Auto Ch Memory Signal  
1
2
Type”.  
Add/Delete channel  
You can select the channel that you want to skip.  
Press or to select “Air” or “Cable”.  
Air - VHF/UHF channels  
Cable - CABLE TV channels  
Select “Channel Add/Delete Add/Delete”,  
1
2
then press or ENTER.  
CH  
Auto Ch Memory  
Press or to select the channel that you want  
Signal Type  
Automatic Search  
Cable  
Start  
to skip.  
CH  
Add/Delete  
NOTE:  
CH  
Signal  
2
3
Analog  
Analog  
Digital  
Digital  
Analog  
Add  
• It may take a few seconds for a digital channel  
picture to appear on screen after being selected.  
Add  
3-1  
3-2  
4
Delete  
Add  
Delete  
Automatic Search  
Select “Channel Auto Ch Memory Automatic  
1
Search”, then press or ENTER.  
Press or to select “Add” or “Delete”,  
3
4
whichever function you want to perform.  
CH  
Auto Ch Memory  
Repeat steps 2 - 3 for other channels you want to  
add or delete.  
Signal Type  
Automatic Search  
Cable  
Stop  
Clear All  
The TV will begin memorizing all the channels  
available in your area.  
All channels are deleted from the channel memory.  
2
Select “Channel Add/Delete Clear All”, then  
• It may take from 15 minutes to 30 minutes to  
complete memorizing digital cable channels.  
Depending on the reception condition, a bar  
display may not advance for several minutes,  
please be patient.  
press or ENTER.  
CH  
Add/Delete  
Adding Channel  
Add/Delete  
Clear All  
>>  
>>  
>>  
NOTE:  
Memorizing channels is best accomplished during  
evening “PRIMETIME” hours, as more stations are  
broadcasting digital signals. Memorizing channels can  
only be accomplished while a station is broadcasting  
a digital signal to set that channel into memory.  
• If you are unsure of the digital channels available  
receive a list based on your address or zip code.  
Should you require further assistance you may call  
our toll-free customer service line at 1-800-289-0980.  
• New digital channels may be added to your area  
periodically, it is recommended to perform the  
“Automatic Search” procedure regularly.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN 18  
Repeat steps 2-3 for other channel.You can  
assign a label to each channel.  
Checking the digital  
signal strength  
4
5
When you finish inputting the label name, press  
EXIT to return to the normal screen.  
This TV will allow you to view the digital signal  
meter for digital channels.  
To clear a Ch Label  
After step 2 above, press or to select “Label  
Clear”, then press or ENTER.  
Select “Channel DTV Signal”, then press or  
1
2
ENTER.  
NOTE:  
The digital signal strength screen will appear.  
• The channel labels will be reset after “Automatic  
Search” on page 18.  
If necessary, adjust the direction of the antenna to  
obtain the maximum signal strength.  
CH  
DTV Signal  
Labeling video inputs  
The Video Label feature allows you to label each  
input source for your TV.  
Select “Setup Video Label”, then press or  
1
2
3
0
50  
100  
ENTER.  
Signal Level  
Press or to select an input which you want to  
NOTE:  
label.  
• Signal meter feature is not available for analog  
channels.  
Press or to select the desired label for that  
• After 240 seconds, DTV Signal screen will return to  
normal TV operation automatically.  
input source.  
Video Label  
Video 1  
Video 2  
Component  
HDMI 1  
HDMI 2  
PC  
-
-
-
-
-
-
Labeling channels  
Channel label appear with the channel number  
display each time you turn on the TV, select a  
channel, or press DISPLAY.  
You can choose any four characters to identify a  
channel.  
/ VCR / DVD / STB / Cable / Satellite / Receiver /  
Game / Camcorder / PC / DVI PC / Blu-ray  
To create channel labels  
Select “Channel Ch Label”, then press or  
1
2
ENTER.  
Press or to select a channel you want to  
label, then press .  
CH  
Ch Label  
Channel Number  
Ch Label  
15-1  
CH-1  
>>  
Label Clear  
Press or repeatedly until the character you  
3
want appears in the first space.  
CH  
Ch Label  
Channel Number  
15-1  
CH-1  
>>  
Ch Label  
Label Clear  
The characters rotation as follows:  
, () @ / + =  
-
-
SPACE  
If the character which you desire appears, press  
ENTER.  
Repeat this step to enter the rest of the characters.  
If you would like a blank space in the label name,  
you must choose the empty space from the list of  
characters.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
19 EN  
When you select TV-Y7, TV-PG, TV-14 or TV-MA,  
Setting the V-Chip  
press DISPLAY to explain the rating.  
Genre:  
An age limitation can be set to restrict children from  
viewing or hearing violent scenes or pictures that you  
may choose to exclude. The restriction applies to “TV  
Rating” and “Movie Rating” if this data is transmitted.  
You may set this restriction separately. To use the  
V-Chip function, you must register a password.  
D
L
: Dialogue  
: Language  
: Sex  
S
V
:Violence  
FV  
: Fantasy Violence  
Movie Rating  
To register a password  
Movie Rating  
Select “Lock”, then press or ENTER.  
1
G
PG  
PG-13  
R
Select and enter your password (4 digits) using  
2
Number buttons (0-9), then press ENTER.  
NC-17  
X
Lock  
_
New Password  
* * *  
G
: All ages  
: Parental guidance  
PG  
” appears instead of the number.  
PG-13 : Parental guidance less than 13 years old  
R
: Under 17 years old parental guidance  
suggested  
Enter the same password again to confirm, then  
press ENTER.  
3
NC-17 : 17 years old and above  
The password is now registered.  
X
: Adult only  
NOTE:  
Press or to select the desired rating, then  
4
5
• If you forget the password, contact Customer  
Service at 1-800-289-0980 for assistance.  
Your original remote control will be required.  
To avoid forgetting the password, write it down and  
keep in a safe place.  
press ENTER.  
Press EXIT to return to the normal screen.  
V-Chip function is activated now.  
NOTE:  
• The V-Chip function is activated only on programs  
and input sources that include a rating signal.  
How to enter the V-Chip menu  
Select “Lock” menu, then press or ENTER.  
1
To change the password  
Use Number buttons (0-9) to enter your  
2
password, then press ENTER. The V-Chip menu  
In the V-Chip menu, press or to select  
1
will appear.  
“Change Password”, then press or ENTER.  
The Change Password screen will appear.  
To set the V-Chip  
Enter a new password using Number buttons  
2
3
In the V-Chip menu, press or to set “V-Chip”  
(0-9), then press ENTER.  
1
2
to “On”.  
Enter the same password again to confirm, then  
Press or to select “V-Chip Set”, then press ▶  
press ENTER.  
or ENTER.  
The password is now registered.  
The V-Chip Set menu will appear.  
Downloading the additional V-Chip rating system  
As a supplement to the standard V-Chip rating  
system, your television will be able to download an  
additional rating system, if such a system becomes  
available in the future.  
Press or to select which rating will be used,  
3
then press or ENTER. Each rating below will  
appear.  
TV Rating  
TV Rating  
To download the additional V-Chip rating system  
(when available)  
TV-Y  
TV-Y7  
TV-G  
TV-PG  
TV-14  
TV-MA  
In the V-Chip menu, press or to set “V-Chip”  
1
2
3
to “On”.  
Press or to select “V-Chip Set (DTV)”, then  
You can set the rating using age level and genre.  
press or ENTER.  
If the TV is not storing the additional rating  
Age:  
system, the TV will begin downloading it, which  
may take some time to be completed.  
TV-Y  
: All children  
TV-Y7 : 7 years old and above  
TV-G  
: General audience  
Set your preferred content rating limits for the  
4
5
TV-PG : Parental guidance  
additional rating system.  
TV-14 : 14 years old and above  
TV-MA : 17 years old and above  
You also need “Update” procedure to update  
rating information.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN 20  
NOTE:  
NOTE:  
You can only download the additional V-Chip rating  
system when your TV is receiving a digital signal.  
• When you download the additional rating system, it  
may take some time for the download to occur.  
• The V-Chip rating information and system are not  
determined or controlled by the TV.  
• If the program or video you selected is not closed-  
captioned, no captions will display on-screen.  
• If text is not available in your viewing area, a black  
rectangle may appear on-screen. If this happens,  
set the CC Setting to “Off”.  
• When selecting Closed Captions, the captioning will  
be delayed approx. 10 seconds.  
• The standard V-Chip rating system is available  
whether your TV is receiving a digital signal or not,  
and will block both analog and digital programs. To  
set the restriction level using the standard V-Chip  
rating system, select “V-Chip Set” in step 2.  
• The downloadable V-Chip rating system is an  
evolving technology, and availability, content, and  
format may vary.  
If no caption signal is received, no captions will appear,  
but the television will remain in the Caption mode.  
• Misspellings or unusual characters may  
occasionally appear during Closed Captioning.  
This is normal with Closed Captioning, especially  
with live programs. This is because during live  
programs, captions are also entered live. These  
transmissions do not allow time for editing.  
• When Captions are being displayed, on-screen  
displays, such as volume and mute may be seen  
but may interfere with Closed Captions.  
You cannot select this feature if the TV is not  
receiving a digital signal for the current station.  
To clear the all V-Chip settings  
• Some cable systems and copy protection systems  
may interfere with the Closed Captioned signal.  
• If using an indoor antenna or if TV reception is very  
poor, the closed caption decoder may not appear or  
may appear with strange characters or misspelled  
words. In this case, adjust the antenna for better  
reception or use an outdoor antenna.  
In the V-Chip menu, press or to select  
1
“V-Chip Clear”, then press or ENTER.  
The V-Chip Clear screen will appear.  
Use Number buttons (0-9) to enter your  
2
password, then press ENTER. All of your settings  
return to the factory settings.  
• Closed Caption menu also can be displayed by  
pressing CCD on the remote control.  
Closed Caption  
CC advanced  
WHAT IS CLOSED CAPTIONING?  
This television has the capability to decode and  
display Closed Captioned television programs.  
Closed Captioning will display text on the screen  
for hearing impaired viewers or it will translate and  
display text in another language.  
When you have selected Custom as the display  
method, you can adjust the various setting listed  
below as follows:  
This feature is designed to customize Digital Caption  
only.  
Captions: This Closed Caption mode will display  
text on the screen in English or another language.  
Generally, Closed Captions in English are transmitted  
on C1 and Closed Captions in other languages are  
transmitted on C2.  
Select “Setup Closed Caption”, then press or  
1
ENTER.  
Press or to set “CC Setting” to “On”.  
2
Press or to select “Digital CC Preset”, then  
press or to select “Custom”.  
3
4
Text: The Text Closed Caption mode will usually fill  
1/2 of the screen with a programming schedule or  
other information.  
Press or to select “CC Advanced”, then  
press or ENTER.  
Select “Setup Closed Caption”, then press or  
The CC Advanced menu will appear.  
1
2
ENTER.  
Press or to select the desired item, then  
press or to change the setting.  
5
Press or to set “CC Setting” to “On”.  
On: Captions will be displayed on the screen.  
Off: Captions will not be displayed on the screen.  
CC Advanced  
Press or to select “Analog Caption” or “Digital  
3
Text Size  
Auto  
Auto  
Auto  
Auto  
Auto  
Auto  
Auto  
Caption”.  
Text Type  
Text Edge  
When you select “Analog Caption”, you can  
Text Color  
choose from C1, C2, C3, C4, T1, T2, T3 and T4.  
Text Opacity  
Background Color  
Background Opacity  
When you select “Digital Caption”, you can  
choose from CS1, CS2, CS3, CS4, CS5 and CS6.  
Press or to select the desired Closed  
4
Caption mode for both Digital and Analog Caption.  
Press or to select “CC Priority”, then press  
5
or to select “Digital CC” or “Analog CC”.  
NOTE:  
• Depending on the broadcast signal, some  
Analog Captions will function with a Digital  
broadcast signal. This step prevent that two  
kind of captions are overlapping.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
21 EN  
You can select from among the following items  
and parameters.  
Cinema Wide1 (for 4:3 format programs)  
To fill the screen, the right and left edges are  
extended, however; the center of the picture remains  
near its former ratio.  
Text Size:  
Text Type:  
Auto, Small, Standard, Large  
Auto, Style1, Style2, Style3, Style4,  
The top and bottom edges of the picture may be hidden.  
Style5, Style6, Style7  
Text Edge: Auto, None, Raised, Depressed,  
Uniform, Left Shadow, Right  
Shadow  
Text Color: Auto, Black, White, Red, Green,  
Blue, Yellow, Magenta, Cyan  
Text Opacity: Auto, Solid, Transparent,  
Cinema Wide2 (for letter box programs)  
The entire picture is uniformly enlarged—it is  
stretched the same amount both wider and taller  
(retains its original proportion).  
Translucent, Flashing  
Background Auto, Black, White, Red, Green,  
Color:  
Blue, Yellow, Magenta, Cyan  
Background Auto, Solid, Transparent,  
The top and bottom edges of the picture may be hidden.  
Opacity: Translucent, Flashing  
NOTE:  
You cannot set both “Text Color” and “Background  
Color” as a same color.  
You cannot set both “Text Opacity” and “Background  
Opacity” to “Transparent”.  
Cinema Wide3 (for letter box programs with  
subtitles)  
Setting the picture size  
To fill the width of the screen, it is extended  
horizontally. However; it is only slightly extended at the  
top and the bottom.  
You can change to a variety of picture sizes—  
Natural, Cinema Wide1, Cinema Wide2, Cinema  
Wide3, Full and Native.  
The top and bottom edges of the picture may be hidden.  
Selecting the picture size  
Select “Picture Picture Size”, then press or  
1
2
A B C D E F G - - - - - - - - - - - - - - - -  
A B C D E F G - - - - - - - - - - - - - - - - - - - - - - - - - -  
ENTER to display “Picture Size” menu  
.
Full (for 16:9 source programs)  
Full will display the picture at the maximum size.  
Press or or corresponding Number buttons  
(0-4) to select the desired picture size, as described  
below.  
Picture Size  
0.Natural  
Native (for PC mode only)  
1.Cinema Wide1  
2.Cinema Wide2  
3.Cinema Wide3  
4.Full  
Detects the resolution of the signal of the image and it  
will be shown on the screen with same amount of pixels.  
NOTE:  
• Selectable picture sizes may vary depending on the  
input source or broadcast signal.  
NOTE:  
• Some High Definition and/or Digital broadcasts may  
not allow you to change the picture size.  
• In HDMI or COMPONENT mode with a scanning  
rate of 720p, 1080i or 1080p (HDMI only) only the  
Cinema Wide2 and Full picture size feature are  
available.  
• Picture Size menu also can be displayed by  
pressing PICTURE SIZE on the remote control.  
Natural  
In some cases, this image will display the size of  
standard 4:3 with a black side bar.  
• In PC mode, only the Natural, Full and Native  
picture size features are available. In PC mode  
(WXGA), only the Full and Native picture size  
features are available.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN 22  
Time Shift  
Playback status :  
(PLAY), (STOP), (PAUSE),  
You can record a digital program by using the  
USB memory drive. This function is for your  
convenience, and allows you to pause/record a  
live program for a period of time based on the  
size of the USB drive inserted.  
(SKIP+),  
(SKIP-)  
Delayed time from the current program  
or Playing time in the play mode.  
• If there are no recorded program in  
the USB memory, --:--:-- will appear  
Recording  
Note: The connected USB device must;  
• Have a minimum approx. 100 MB of memory (32 GB  
max.).  
USB Memory Information  
• Formatted as FAT16/32.  
• Have a write speed higher than 40Mb/sec.  
• Contain no other files.  
• Do not use USB extension cable.  
Delay Time : 00:02:09  
Message: Now Play View  
Preparation:  
Plug-in an external storage device into USB port.  
Message display  
To start recording, press (PAUSE).The recording  
will start and the picture will be paused.  
To view a live program, press (STOP).  
The paused picture goes back to a live program  
and recording continues.  
• Now Live View... Viewing live program  
• Now Play View... Viewing recorded program  
• Now Pause View... Pausing the program  
• Not Available... Inhibited function  
• USB Memory is full...Caution of available USB memory  
less than 100MB (Insufficient USB free space...will show  
when (PAUSE) is pressed.  
To stop recording, press (STOP) again during  
viewing a live program with recording.  
To start playback, press (PLAY).The recorded  
program starts playback.  
• No Data... When you press  
(PLAY) and there are no  
data recorded in the USB memory  
If you want to watch the program while recording,  
press (PLAY).  
USB Memory is unplugged... USB memory is not connected  
You can watch the recorded program while  
recording the current program.  
To delete the recorded program  
Disconnect the USB memory, record another  
program, or turn off the TV.  
To pause the playback picture, press (PAUSE).  
To stop the playback, press (STOP).  
Note:  
To fast forward or fast reverse, press  
(SKIP+) or  
• Time shift does not work for ATV or external inputs. If you  
change the signal while recording a program (Live View),  
recording will stop.  
(SKIP).  
USB status display  
• During Play view mode, ATV channel select or input select  
will not work.  
Press DISPLAY while watching a DTV channel, or  
press the Time Shift operation buttons. The status  
display will appear.  
• Time shift recordable time is approximately 10 minutes  
per 1 GB for HD or 30 minutes for SD (depending on the  
program).  
You cannot watch the recorded program on a PC or other  
device.  
• All of the USB memory may not be able to be used.  
• We will accept no responsibility whatsoever for loss of files  
on USB devices caused by connection to this unit.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
23 EN  
Reception disturbances  
Most types of television interference can be remedied by adjusting the height and position of the VHF/UHF  
antenna. Outdoor antennas are recommended for best results. The most common types of television  
interference are shown below. If one of these symptoms appear when the TV is connected to a Cable TV  
system, the disturbance may be caused by the local Cable TV company broadcast.  
IGNITION  
Black spots or horizontal streaks may appear, the picture may flutter or  
drift. Usually caused by interference from automobile ignition systems,  
neon lamps or AC powered tools and appliances such as drills or hair  
dryers.  
GHOSTS  
Ghosts are caused by the television signal following two paths. One is the  
direct path and the other is reflected by tall buildings, hills or other large  
objects. Changing the direction or position of the antenna may improve  
the reception.  
SNOW  
If the TV is located far from the TV station, in a fringe reception area where  
the signal is weak, small dots may appear in the picture.  
If the signal is extremely weak, the installation of a larger external antenna  
may be necessary.  
RADIO FREQUENCY INTERFERENCE (RFI)  
Caused by two-way radios, this type of interference produces moving  
ripples or diagonal streaks in the picture. Some cases may cause a loss of  
contrast in the picture. Changing the direction and position of the antenna  
or installing an RFI filter may improve the picture.  
PICTURE SIZE VARIATION  
A slight picture size variation is normal when you adjust the CONTRAST or  
BRIGHTNESS settings.  
CARE AND MAINTENANCE  
To prevent fire or shock hazard, disconnect the TV from the power source before cleaning.  
The finish on the cabinet may be cleaned with mild soap and a soft, damp cloth and cared for as other furniture.  
Use caution when cleaning or wiping the plastic parts.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN 24  
Troubleshooting  
Use the following checklist for troubleshooting if you have problems with your TV. Consult your local dealer or  
service outlet if problems persist. Be sure all connections are properly made when using with other units.  
SYMPTOMS  
POSSIBLE SOLUTIONS  
SYMPTOMS  
POSSIBLE SOLUTIONS  
Digital  
• Make sure the power cord is plugged in.  
broadcasting  
screen  
Try another AC outlet.  
• Check digital signal strength.  
TV does not  
operate.  
• Power is off, check fuse or circuit breaker.  
• Unplug unit for an hour, then plug it back  
in.  
problem.  
• Check all Cable TV connections.  
• Set Signal Type menu option to the  
Cable mode.  
• Station or Cable TV experiencing  
problems, tune to another station.  
• Check sound adjustments (VOL +/- or  
MUTE).  
No CATV  
reception.  
• Station or Cable TV system problems,  
Poor sound  
or no sound.  
try another station.  
• Check for sources of possible  
interference.  
• Check antenna connections, adjust or  
re-direct antenna.  
Horizontal or  
diagonal bars  
on screen.  
• Check for sources of possible  
interference.  
• Station or Cable TV experiencing  
problems, tune to another station.  
• Make sure channels are set into memory.  
• Make sure Signal Type option is in the  
No reception  
above  
Poor picture • Check antenna or Cable TV  
appropriate mode.  
or no picture.  
connections, adjust antenna.  
• Check for sources of possible  
interference.  
• If using antenna, check UHF antenna  
connections.  
channel 13.  
• Batteries are weak, dead or inserted  
• Check picture control adjustments.  
incorrectly.  
• Station or Cable TV experiencing  
problems, tune to another station.  
• Make sure channels are set into memory.  
• Station is weak, adjust antenna to  
receive desired station.  
• Remote is out of range, move closer to  
TV (within 15 feet).  
No Remote  
operation.  
Poor  
• Make sure Remote is aimed at sensor.  
• Confirm there are no obstructions  
between the Remote and the TV.  
• Make sure the power cord is plugged in.  
reception on  
some  
channels.  
• Check for sources of possible  
interference.  
• Sleep Timer is set.  
TV shuts off.  
• Station or Cable TV experiencing  
problems, tune to another station.  
• Make sure channels are set into memory.  
• Power interrupted.  
• TV station experiencing problems or  
program tuned is not closed captioned.  
Try another channel.  
Poor color or • Check picture control adjustments.  
Closed  
no color.  
• Check antenna or Cable TV  
connections, adjust antenna.  
• Check for sources of possible  
interference.  
Caption is not  
activated.  
• Check Cable TV connection or VHF/UHF  
antenna, reposition or rotate antenna.  
• Set closed caption decoder in the menu.  
TV is not  
• Station or Cable TV experiencing  
problems, tune to another station.  
• Make sure channels are set into memory.  
• Cable TV company is scrambling signal.  
• Adjust antenna.  
• Select proper language in the menu  
options.  
shown in your  
language.  
Picture  
wobbles or  
drifts.  
Cannot delete • Set the “E-POP Demo” in the Auto Setup  
E-POP. menu to “Off”.  
BLOCK NOISE / PICTURE FREEZE  
Block noise or picture freeze may appear on the screen caused by weak signals, interference from automobile  
ignition systems, neon lamps or AC powered tools and appliances such as drills or hair dryers.  
FOR CUSTOMER SERVICE, ADDITIONAL SET-UP AND OPERATING ASSISTANCE, OR TO ORDER ACCESSORIES PLEASE CALL:  
1-800-289-0980  
WHEN CALLING CUSTOMER SERVICE PLEASE HAVE YOUR MODEL NUMBER READY  
OR WRITE TO:  
ORION SALES, INC.  
3471 N. UNION DR.  
OLNEY, ILLINOIS 62450  
FOR INFORMATION ON OUR OTHER PRODUCTS, TO ORDER ACCESSORIES ONLINE,  
OR FOR RECYCLING INFORMATION, PLEASE VISIT OUR WEBSITE AT  
Download from Www.Somanuals.com. All Manuals Search And Download.  
25 EN  
Specifications  
GENERAL  
Power supply:  
AC 120V, 60Hz  
Power consumption:  
Operation: 49W  
Stand by: 0.3W  
6.0 kg (13.2lbs)  
Width: 732.9 mm (28-55/64 inches)  
Height: 472.9 mm (18-39/64 inches)  
Depth: 170 mm (6-45/64 inches)  
5˚C - 40˚C  
Less than 80% RH  
Weight:  
Dimensions:  
Operating temperature:  
Operating humidity:  
Type:  
Display method:  
Number of Pixels:  
Broadcasting system:  
800.4mmV (32” class/31.51” diagonal)  
Transmission TFT color LCD panel  
1366 (H) × 768 (V)  
US System M  
ATSC standard (8VSB), QAM  
Receiving channels:  
VHF  
2-13  
UHF  
14-69  
CATV 14-36 (A)-(W)  
37-59 (AA)-(WW)  
60-85 (AAA)-(ZZZ)  
86-94 (86)-(94)  
95-99 (A-5)-(A-1)  
100-135 (100)-(135)  
01 (4A)  
Tuner type:  
Inputs:  
Frequency synthesized  
Video: (RCA) 1 V (p-p), 75 ohms  
Audio:  
(RCA) –8 dBm/50k ohms  
Component video:  
(Y) 1 V (p-p), 75 ohms  
(Pb)/(Pr) 0.7 V (p-p), 75 ohms  
HDMI: HDMI compliant (type A connector)  
HDCP compliant  
E-EDID compliant  
Suggested scan rates: 480p, 480i, 720p,1080i,1080p  
HDMI Audio: 2-channel PCM  
32/44.1/48 kHz sampling frequency  
16/20/24 bits per sample  
PC Monitor: Mini-Dsub 15pin  
Antenna:  
Audio:  
VHF/UHF In 75 ohms coaxial  
0-600mVrms/1k ohm  
Outputs:  
Digital audio out:  
0.5 V (p-p), 75 ohms terminated  
Speakers:  
Audio output power:  
ACCESSORIES  
40.6 mm × 121.9 mm (1-5/8 inches × 4-13/16 inches), 8 ohms × 2  
5.0W + 5.0W  
Remote control  
Batteries (AAA) × 2  
Stand  
Stand Screws (4×16mm (5/32 × 5/8 inches)) × 4  
Designs and specifications are subject to change without notice.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN 26  
limited  
WARRANTY  
32” CLASS LED-LCD HDTV  
ORION warrants this product to be free from manufacturing defects in material and workmanship under  
normal use and conditions for a period of 1 year from date of original purchase in the United States.  
Should service be necessary under this warranty for any reason due to a manufacturing defect or  
malfunction during the first 12 months from date of original purchase, ORION will provide carry-in service only by  
an ORION authorized Independent Service Center at no charge. Also, if an original part fails due to manufacturing  
defect in material and workmanship within one year from date of original purchase we will replace the defective  
part, provided the defect or malfunction is verified along with dated proof of purchase.  
There are ORION authorized Independent Service Centers located throughout the country. For the one  
be liable for damages incurred in shipment of the unit. If there are no ORION authorized Independent Service  
Centers in your area please call - 1-888-296-7466 for assistance.  
Note:This warranty is void if the product is:  
(a) Damaged through negligence, misuse, abuse, or accident.  
(b) Used in a commercial application or rentals.  
(c) Modified or repaired by anyone other than an Independent Service Center authorized by ORION to effect  
warranty repairs to the class of product or by the ORION Factory Service Center.  
(d) Damaged because it is improperly connected to the equipment of other manufacturers.  
This warranty does not cover:  
(a) Damage to equipment not properly connected to the product.  
(b) Costs incurred in the shipping of the product to an ORION authorized Independent Service Center or  
ORION Factory Service Center.  
(c) Damage or improper operation of unit caused by customer abuse, misuse, negligence, or failure to follow  
operating instructions provided with the product.  
(d) Ordinary adjustments to the product which can be performed by customer as outlined in the owner’s  
manual.  
(e) Signal reception problems caused by external antenna or cable systems.  
THIS WARRANTY IS NON TRANSFERABLE AND APPLIES ONLY TO THE ORIGINAL PURCHASER  
AND DOES NOT EXTEND TO SUBSEQUENT OWNERS OF THE PRODUCT. ANY APPLICABLE IMPLIED  
WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY, ARE LIMITED IN DURATION TO A  
PERIOD OF THE EXPRESS WARRANTY AS PROVIDED HEREIN BEGINNING WITH THE DATE OF ORIGINAL  
PURCHASE AT RETAIL AND NO WARRANTIES, WHETHER EXPRESS OR IMPLIED SHALL APPLY TO THIS  
PRODUCT THEREAFTER. ORION MAKES NO WARRANTY AS TO THE FITNESS OF THE PRODUCT FOR  
ANY PARTICULAR PURPOSE AND USE.  
UNDER NO CIRCUMSTANCES SHALL ORION BE LIABLE FOR ANY LOSS, DIRECT, INDIRECT,  
INCIDENTAL, SPECIAL, OR CONSEQUENTIAL DAMAGE ARISING OUT OF OR IN CONNECTION WITH THE  
USE OF THIS PRODUCT.  
THIS WARRANTY IS VALID ONLY IN THE UNITED STATES OF AMERICA. THIS WARRANTY GIVES YOU  
SPECIFIC LEGAL RIGHTS, HOWEVER, YOU MAY HAVE OTHER RIGHTS WHICH MAY VARY FROM STATE  
TO STATE. SOME STATES DO NOT ALLOW LIMITATION ON IMPLIED WARRANTIES OR EXCLUSION OF  
CONSEQUENTIAL DAMAGE, THEREFORE THESE RESTRICTIONS MAY NOT APPLY TO YOU.  
ORION SALES, INC.  
3471 N. UNION DR.  
OLNEY, ILLINOIS 62450  
Download from Www.Somanuals.com. All Manuals Search And Download.  
27 EN  

QUAD Stereo Amplifier 24 P User Guide
RAD Data comm Modem HCD E1 User Guide
Radica Games Games 76002 User Guide
Radio Shack Stereo Amplifier XL 150 User Guide
Renault Automobile Parts 852 User Guide
Renesas Network Card SH7145F User Guide
Roland Drums TD 9 User Guide
Runco Projector VX 1000d User Guide
Samsung Microwave Oven CE282DNT User Guide
Sennheiser Headphones HD 224 X User Guide