Heavy Duty
Upright Vacuum Cleaner
Household Type
Do not return this product to
the store. Call 1-800-800-8975*
Monday - Friday, 8 am to 7:30
pm CST and 10 am to 6:30 pm
Saturday or visit our web site,
of the following:
• assembly problems
• replacement of broken or missing
items
• to order replacement parts and
accessories
• to locate the nearest Sanitaire
Warranty Station
*En Mexico llame al (55) 5343-4384
We suggest you record the model, type and serial
numbers below. They are located on the silver rating
plate on your cleaner. For prompt and complete
service information, always refer to these numbers
when inquiring about service.
Model & Type
Serial No.
It is also important to keep your receipt as proof of
date of purchase.
Part No. 75326 (12/04)
©2004 Electrolux Home Care Products Ltd.
Printed in U.S.A.
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 2
Attach Upper Cord Hook
CAUTION: Completely assemble vacuum cleaner before
using.
Pull the flexible cord support up toward the top of the
Assembly Packet is with ownerʼs guide.
Insert the lower half of the cord support into the upper cord
hook.
Check to be sure slots in handle are correct, see Detail A.
Place inner tab of cord hook into handle slot as shown (1)
and press hook handle (2) SNAPPING opposite inner tab
into place (3).
A
2-Part
Bolt
B
Upper
C
Lower
D
Bag
Cord Hook Cord Hook Screws
Step 1
Flexible
Cord
Support
Push the handle sections together. Note: Check to be sure
slots in handle are correct, see Detail A.
Su
Align the holes in the handle. Insert a 2-part bolt (A) in the
center of the handle and tighten.
Upper Cord Hook
Push handle into the handle socket so handle grip curves
away from the cleaner. Align the holes, insert the other 2-part
bolt (A) and tighten.
2. Press hook
around handle
1. Place inner
tab into slot
3. SNAP opposite
inner tab into
place
Step 3
Insert the power cord into the lower
cord hook. Snap the hook into the
Pull up on the cord to tighten but
leave enough slack near the base
so there is no strain on the cord
when the handle is lower.
Lower Cord Hook
Step 4
Wrap the cord around the two cord hooks. Fasten the plug
to the electrical cord to prevent unwinding.
Step 5
Attach Outer Bag
IMPORTANT: To provide a good gasket seal, the bag
couplingmustseatfirmlyagainstthemotor
base and not overlap the furniture guard.
A
Hold outer bag with zipper away from the handle. Start the
bag screws (D) by hand, then tighten with a screwdriver.
Loop the bag spring onto the bag support hook on the back
of the upper cord hook.
D
3
Download from Www.Somanuals.com. All Manuals Search And Download.
The instructions given in this booklet serve as a guide to
routine maintenance. To avoid unnecessary service calls,
check the bag, belt and brush roll often.
The upright vacuum clea
is designed to be used
multiple types of carpe
Do not attempt to use
upright vacuum cleane
bare floors, as damag
the floor covering may re
Above the floor cleaning t
are available (optional).
Disposable Dust Bags
Paper bags play a very important role in the efficiency of a
vacuum cleaner. The purpose of a paper bag is to trap dirt.
But at the same time the paper bag must be porous enough to
allow air to pass through. If the paper bag becomes clogged,
no air can pass through the cleaner and no cleaning can take
place, regardless of how powerful the unit. Change the dust
bag frequently. Some fine particles can restrict airflow very
quickly and will decrease performance even before the bag
appears to be full. For that reason, when vacuuming carpet
fresheners or cleaners, powder, plaster dust, or similar fine
substances, the bag may need to be changed more often.
eath
Handle Lock
Handle Adjustment
and adjust it to the desired position for (1) storing upright, (2)
operating the cleaner at a comfortable height for the user,
and (3) cleaning underneath low furniture.
How To Change Disposable Dust Bag–Style F
& G, PN 54924A
CAUTION: Turn off the switch and unplug the electrical
cord before changing dust bag. Never
operate the vacuum cleaner without the
dust bag.
The power switch is
mountedonthemotorhood.
A push with the foot turns
the motor ON; push again
to turn the motor OFF.
Cord Storage
The cleaner has two convenient cord storage
hooks attached to the handle. However, some
models feature a quick release cord hook on
the upper handle. A downward twist of the
cord hook frees the cord for quick removal.
With either style, wind the cord around the
hooks for storage. Fasten the plug to the cord
to prevent unwinding.
zipper
2. Roll down
coil spring.
3. Pull bag
throat off
sleeve.
new bag.
Cleaner Height Setting
WARNING: Avoid injury. Keep loose clothing, hair,
fingers, and all other parts of body away
from any moving part (such as the revolving
brush). Turn off the switch and unplug the
cleaner before changing the cleaner height
setting.
THR
5. Place bag
6. Roll up coil spring.
The front of the cleaner has an adjustment that raises or
lowers the cleaner base to match the type of carpet. With
the cleaner cord unplugged, set the adjustment to lowest
setting for maximum cleaning. If the cleaner is difficult to
push, move adjustment to next highest setting until cleaner
is comfortable to push. The brush roll must reach the carpet
for effective cleaning.
7. Place paper bag into outer bag.
NOTE: Be certain there are no folds
at the top or bottom of the
paper bag.
8. Lift zipper
Make each adjustment with cleaner switch off and
cord disconnected from outlet. For ease in moving the
adjustment knob, place handle in operating position and tilt
cleaner back to remove weight from front wheels.
GENUINE
Look for the
symbol.
Ask for GENUINE EUREKA dust bags – Style F & G.
Download from Www.Somanuals.com. All Manuals Search And Download.
® Bag Care
(Micron Filter Bag is standard on some models)
Because the Micron Filter Bag is an effective filter medium,
occasionally trapped dust particles will need to be cleaned
out with another vacuum or the bag may be removed to shake
out. If you desire, the bag may be hand laundered. The zipper
on the bag should be down and the bag should remain right
side out. Use warm water (150°F 65°C) and a mild detergent.
Pre-soaking the bag in a laundry pre-soak is desirable for
best cleaning results. Air dry thoroughly before using.
Check for brush wear (see Brush Roll instructions).
DO NOT USE AN AUTOMATIC WASHER OR DRYER as
either will cause abrasion to the delicate polyester fabric. DO
NOT DRY CLEAN as dry cleaning fluids will damage plastic
parts of your bag assembly.
4. Align brush roll pulley with belt guide.
CAUTION: Turn off the switch and unplug the electrical
cord before cleaning unit.
To keep the vacuum cleaner looking new, it can be wiped with
a damp cloth and a mild soap solution, then thoroughly dried.
Never use any type of chemical as chemicals can damage
the cleaner. When not in use, the cleaner should be stored
in a clean, dry place.
Metal Brush Roll only.
Place rubber end cap covers (available on select models)
over both end caps (flat side against end cap).Align holes
and secure.
The brush roll belt on the upright vacuum cleaner drives the
brush to agitate, sweep, and comb the carpet nap. The belt
should be checked regularly to be sure it is in good condition.
Replace the belt if it is stretching, cracking, or slipping. Cut
away any hair or thread wound around the brush roll or the
belt pulley because the buildup could cause the belt to rotate
unevenly.
5. Slant brush roll forward so end caps are in line with
slots in cleaner base.
6. Push brush roll into base.
How To Replace A Worn Belt
PN 52100A, Style RD
CAUTION: Turn off the switch and unplug the electrical
cord before replacing belt. Belt pulleys can
become hot during normal use. To prevent
burns, avoid touching the belt pulley when
servicing the drive belt.
7. Place lower side of belt into belt guide and pull to
stretch the belt around the left side of motor pulley.
Rotate pulley to secure belt into groove.
IMPORTANT: Improper installation of the brush roll
or brush roll belt could cause carpet or
cleaner damage.
1. Release cam locks.
8. Place slots of bottom
plateovertabsofcleaner
base.
Motor
2
9. Seat and secure cam
locks.
8
8
replacement belts, No. 52100A
2. Pull up on belt to rotate it off the motor pulley. Lift up
on brush rolL and remove worn belt.
GENUINE
Look for the
symbol.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Headlight Bulb (Standard on most models)
The rotating brush roll sweeps and combs the carpet nap.
Keep the brush roll free from hair and threads so it will
continue brushing. When the bristles of the brush roll no
longer touch a straight edge held across the bottom plate,
the brush roll is ineffective because the bristles no longer
touch the carpet nap. To maintain the most effective cleaning,
replace the wood brush roll. Install new brush strips on the
chromed steel brush roll (refer to instructions).
CAUTION: Turn off the switch and unplug the electrical
cord before replacing headlight bulb.
Headlight style varies by model. Locate the notches that
release the tabs at either (1) top, (2) side, or (3) bottom of
the lens, as illustrated. Place a screwdriver into one notch;
twist or pry the screwdriver to release the lens. Repeat for
the second notch on the opposite side.
Rotate the bulb socket forward. Push bulb in and turn to
remove. Secure new bulb into socket and rotate bulb socket
backward.
How To Replace Worn Brush Strips, PN 52282-4
(chromed steel brush roll)
CAUTION: Turn off the switch and unplug the electrical
cord before replacing brush strips.
Replace the lens tabs into the top or the bottom of the hood
opening. Rotate lens to position and press down at each
notch until the lens locks into position.
New brush strips are supplied in sets of two, one long and
one short. To replace, remove bottom plate and belt (see
How To Change Belt). Then, grasp center of brush roll and
CAUTION: Use 25 watt replacement bulb, only.
Ask for GENUINE EUREKA replacement bulb, 40009A.
2
F
3
A
B
C
D
E
Note:
Shaft washer (D) not included in ball bearing brush roll assembly.
E
G.Slide in new brush strip of same
length (rounded end first). Fit track
Replace second brush strip from
opposite end of brush roll.
A. Remove rubber end cap cover
(available on select models)
from one end.
C. Remove end cap.
F. Replace shaft.
D. Remove shaft washer (not
included in ball bearing brush
roll).
E. Align indentation on bearing retainer
with brush strip on both ends of
unplug the electrical cord
before cleaning unit.
E. Remove bearing retainer.
D. Replace shaft washer.
F. Push shaft through opposite
C. Position end cap with flat sides
To keep the vacuum cleaner looking new,
it can be wiped with a damp cloth and
a mild soap solution, then thoroughly
dried. Never use any type of chemical
as chemicals can damage the cleaner.
When not in use, the cleaner should be
stored in a clean, dry place.
G.Pull out worn brush strip with
pliers.
B. Tighten locknut.
A. Align holes and secure rubber end
cap cover flat side against end
cap.
When properly assembled, the brush roll should rotate freely
between the two end caps. Check the condition of the belt;
change if necessary. Replace the brush roll, belt, and bottom
plate (see How To Replace A Worn Belt).
Ask for GENUINE EUREKA replacement brush strip.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
hat This Warranty Covers
Your Sanitaire cleaner is warranted to be free from all defects in material and workmanship in normal household use for a period of two years.
The warranty is granted only to the original purchaser and members of his or her immediate household. The warranty is subject to the following
provisions.
hat This Warranty Does Not Cover
Parts of the cleaner that require replacement under normal use, such as disposable dust bags, filters, drive belts, light bulbs, and brush roll
bristles.
• Damages or malfunctions caused by negligence, abuse, or use not in accordance with the Ownerʼs Guide.
• Defects or damages caused by unauthorized service or the use of other than Genuine Eureka/Sanitaire parts.
Electrolux Home Care Products NorthAmerica will, at its option, repair or replace a defective cleaner or cleaner part that is covered by this warranty.
As a matter of warranty policy, Electrolux Home Care Products North America will not refund the consumerʼs purchase price.
xtended Warranty for Upright Cleaner (Only)
The base of the Sanitaire Upright cleaner is warranted for five years from the original date of purchase.
xtended Warranty for SYSTEM_PRO Canisters
The motor for SYSTEM_PRO canister cleaners is warranted for five years from the original date of purchase.
arranty Registration
Please fill out and return the warranty registration card accompanying your cleaner.
btaining Warranty Service
To obtain warranty service you must return the defective cleaner or cleaner part along with proof of purchase to any Sanitaire Authorized Warranty
Station. You will find the nearest location in the Yellow Pages, under “Vacuum Cleaners–Service and Repair.” Be certain that the Warranty Station
is “Sanitaire Authorized.” For the location of the nearest Sanitaire Authorized Warranty Station or for service information, telephone toll free:
USA: 1-800-800-8975
Mexico: (55) 5343-4384
Canada: 1-800-800-8975
If you prefer, you can write to Electrolux Home Care Products North America, Service Division, P.O. Box 3900, Peoria, Illinois 61612, USA. In
Canada write to Electrolux Home Care Products North America, 866 Langs Drive, Cambridge, Ontario N3H 2N7.
If it is necessary to ship the cleaner outside your community to obtain warranty repair, you must pay the shipping charges to the SanitaireAuthorized
Warranty Station. Return shipping charges will be paid by the Warranty Station. When returning parts for repair, please include the model, type,
and serial numbers from the data plate on the cleaner.
Any warranty that may be implied in connection with your purchase or use of the cleaner, including any warranty of Merchantability or any
warranty for Fitness For A Particular Purpose is limited to the duration of this warranty. Some states do not allow limitations on how long an
implied warranty lasts, so the above limitations may not apply to you.
Your relief for the breach of this warranty is limited to the relief expressly provided above. In no event shall Electrolux be liable for any consequential
or incidental damages you may incur in connection with your purchase or use of the cleaner. Some states do not allow the exclusion or limitation
of incidental or consequential damages, so the above limitation or exclusion may not apply to you.
This warranty gives you specific legal rights. You may also have other rights which vary by state.
GENUINE
EUREKA PRODUCT
Q
Q: Why should I use only Genuine Eureka/Sanitaire paper bags, belts, and parts in my Eureka/Sanitaire vacuum cleaner?
A: Using Genuine Sanitaire Products, which are made to our exacting specifications and engineered with emphasis on quality,
performance, and customer satisfaction, ensures the long life and cleaning efficiency of your vacuum cleaner. Overall, this
saves you money and helps to keep your home clean.
Q: How can I be sure I am using only Genuine Eureka/Sanitaire products in my vacuum cleaner?
A: Typically, packaged products and paper bags can be identified by a Eureka or Sanitaire logo. For further identification
assistance, you may call our toll-free number, 1-800-800-8975, for the location of a nearby Eureka/Sanitaire Authorized
Warranty Station.
Q: Are there any differences between “made to fit” or “imitation” and Genuine Eureka/Sanitaire paper bags, belts, and parts?
A: Yes, there are some very important differences in materials, quality, and reliability. Many customers have mistakenly
purchased “imitation” paper bags and parts while thinking they purchased genuine. Unfortunately, many of these customers
discovered the differences after they experienced related difficulties.
For Genuine Sanitaire Value, Accept No Imitations!
Household Warranty
Bloomington, Illinois 61701
Download from Www.Somanuals.com. All Manuals Search And Download.
|