RCR-5
GB
Version 1
Download from Www.Somanuals.com. All Manuals Search And Download.
Important safety instructions
1. Read and understand all safety and operating instructions
before the radio is operated.
2. Retain instruction: The safety and operating instructions should
be retained for future reference.
3. Heed warnings. All warnings on the appliance and operating
instructions should be followed.
4. Follow all operations and use instructions.
5. Water and moisture: The appliance should not be used
near water. Do not use near a bathtub, washbowl, laundry tub,
kitchen sink, wet basement, swimming pool, etc.
6. Unplug the radio from the AC power outlet before cleaning.
Use only a damp cloth for cleaning the exterior of the radio.
7. Do not place the radio on an unstable cart, stand, bracket or
table. The radio may fall, causing serious personal injury and
damage to the radio.
8. Ventilation: This radio should be situated so that its location or
position does not interfere with its proper ventilation.
For example, the radio should not be used on a bed, sofa, rug or
other soft surfaces that may block the ventilation openings.
It should not be placed in a built-in situation like a cabinet that
may reduce air flow through the ventilation openings.
9. Power sources: The radio should be operated only from the type
of power source indicated on the marking label. If you are not
sure of the type of power supply to your home, consult your
radio dealer or power company.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
10. Power cords: The power cord should be positioned so it is not
walked on, pinched, or items placed on top of it. Pay particular
attention to cords at plugs, convenience receptacles, and the
point where they exit from the unit. Unplug the power cord by
gripping the power plug, not the cord. Operate the radio using
only the current type of power source indicated. If you are not
sure of the type of power supply to your home, consult your
dealer or local power company.
11. Do not overload wall outlets or extension cords. This can result
in a risk of fire or electrical shock. Never insert objects of any
kind into the radio through opening. The objects may touch
dangerous voltage points or short out parts. This could cause
a fire or electrical shock.
12. If the radio is left attended and unused for long periods of time,
unplug it form the wall outlet. This will prevent damage caused
by lightning or power line surges.
13. If the radio is left unattended and unused for a long period
of time, remove the batteries. The batteries may leak and
damage furniture of your radio.
14. Do not attempt to service the receiver yourself. Removing the
cover may expose you to dangerous voltage, and will void the
warranty. Refer all servicing to authorized service personnel.
15. Object and Liquid Entry-Never push objects of any kind into this
radio through opening as they may touch dangerous voltage
points or short-out parts that could result in a fire or electric
shock. Never spill liquid of any kind of product.
GB
16. The appliance should be serviced by qualified service
personnel when:
A. The power supply cord or the plug has been damaged.
B. Objects have fallen or liquid had been spilled into the radio.
C. The radio has been exposed to rain or water.
D. The radio does not appear to operate normally or exhibits a
marked change in performance.
E. The radio has been dropped, or the enclosure damaged.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls
1
2
3
4
5
Power on/off and Sleep Timer button
BAND button
NAP TIMER button
STATION PRESETS
TUNING Up/Down and Snooze
TIME SET/DISPLAY button
Alarm 2 button
6
7
8
9
Alarm 1 button
LCD Display
10
11
12
13
14
15
16
Volume Control knob
Headphones socket
AUX in
Display Backlight Adjustment button
Logo and specification mark
FM antenna
Power socket
LCD display
A
Radio band and a.m./p.m. display
Hour and minute digits
Second digits
B
C
D
GB
Alarm indicators
Sleep timer
E
F
Nap timer
G
H
Week day
Clock set
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Clock Setting (date and time)
Clock time has to be set before alarm setting.
1. Press and hold the TIME SET button for more than 2 seconds,
the display will show
, and flash the year digits.
2. Press TUNING Up/Down button to set the year.
3. Press the TIME SET button, then use the same way to set
the date.
* press and hold the TUNING Up/Down button for fast-forward
or fast-backward.
4. Press the TIME SET button to set the hour with TUNING
Up/Down button. Same way (press TIME SET then TUNING
Up/Down ) to the minute. The day of week is automatically set.
5. After the minute is set, then press the TIME SET button to
complete the setting.
While setting, the setting will be cancelled after 30 seconds
without pressing any buttons.
After the time is under setting, the setting won’t be cancelled
even you don’t press any button for more than 30 seconds.
You need to press the TIME SET button to complete the
setting, and the second digit will be set to 0 at the moment
when you press the TIME SET button.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Radio operation
Turn on the radio with the POWER button.
Tune into desired stations
Station selection
1. Press the TUNING up/down button, to tune into the frequency
of your desired stations
2. Scanning tuning- Press and hold the TUNING up/down button for
more than 0.5 seconds and release, the radio will search for the
next station.
STATION PRESETS
1. Tune into the stations that you would like to store.
2. Select a STATION PRESET button (1-5) and press it for
more than 2 seconds until a beep sounds and the station is
now stored.
Note:
When you store a new station in a preset, the station previously
stored will be automatically erased.
GB
Recall the station memories
To recall the station memories, simply press the BAND button
to select the required bands and press the required STATION
PRESET (1-5 ).
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Volume
Turn the VOLUME knob to adjust the volume.
Alarm Clock
Alarm setting can be done while the power is during ON or
OFF position.
The alarm clock is equipped with two alarm systems which can be
operated independently of each other.
There are 2 kinds of alarm sounding, sound- buzzer and radio
1. Select alarm system 1 or 2 by pressing the ALARM 1 or
ALARM 2 button. Display will show the selected alarm
system symbol, or .
2. Before the display goes back to the clock, press TIME SET
button for 2 second until you hear the beep. The display will blink
the hour. Press the TUNING up/down button to set the hour.
3. Press the TIME SET button and the display will flash the minute
digit. Press the TUNING up/down button to set the minute.
4. Press the TIME SET button and then press the TUNING
up/down button to select if the alarm should work on daily,
weekday (Monday to Friday), weekend (Saturday and Sunday),
or only once. 4 options.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Press the TIME SET button and then press the TUNING
up/down button to select the alarm sound. There are
RADIO ALARM
, and BUZZER ALARM
, 2 options.
a. If the BUZZER ALARM is selected – press the TIME SET
button to complete the setting.
b. If the RADIO ALARM is selected – press the TIME SET
button and then select the radio band and the frequency to
choose the alarm radio station. Then press the TIME SET
button to complete the setting.
c. The setting will automatically complete the setting after
30 seconds without any button pressed. But when the
ALARM RADIO is under setting, it will not complete
automatically until the TIME SET of POWER button
is pressed.
6. After the alarm is set, the alarm status will be shown for
6 seconds then will go back to the clock.
* HWS(Human Wake System): In buzzer alarm mode, the buzzer
sound will increase in volume for 1 minute, then followed by
1 minute silence, then repeat the cycle for 1 hour.
GB
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Deactivate alarm setting
Press the ALARM 1 or ALARM 2 button for 2 seconds until you
hear the beep. The alarm symbol will show . And the alarm will be
deactivated. To reactivate the alarm, press the ALARM 1 or
ALARM 2 button for 2 seconds until you hear the beep.
Stop the alarm signal
To stop the alarm sounding , press the POWER button.
Snooze
To interrupt the sounding alarm ( radio or beep tone), press the
SNOOZE button. The alarm stops and begins again with interval
of 5 minutes. The alarm will continue for an hour whatever
being interrupted.
Nap timer
With the NAP button, you can select the period for the short term
alarm in 10 minutes steps from 10-120 minutes.
The Nap timer starts when you release the key. NAP will appear on
display. The alarm signal sounds after the period of time which you
have set.
If you wish to turn off the Nap timer before the time is up,
simply adjust the number of minutes by pressing NAP button to
OFF and release. NAP will disappear from display.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
SLEEP timer – auto shut off
Continuously pressing the POWER button will activate the sleep
function, the radio will switch off automatically in 15, 30, 60, 90,
or 120 minutes.
The Sleep control begins when you release the POWER button and
display will appear the minutes.
After the minutes which selected, the radio turns itself off
automatically
.
If you wish to turn off the radio beforehand, press POWER button.
And the SLEEP timer symbol will disappear.
Calendar Display
Press the TIME SET/DISPLAY button to see the year, and press
it again to see the date. The display will go back to the clock in
3 seconds.
GB
10
Download from Www.Somanuals.com. All Manuals Search And Download.
24/12 hours format, AM, FM frequency
step setting
1. Press and hold the BAND button for 6 second until you hear
the beep, and the display will flash the current 24/12 hr format.
Press the TUNING up/down button to select 24 hr (military hr)
or 12 hr format.
* After the 24/12 hour format setting, if you don’t wish to make
any change on tuning frequency step, please press the BAND
button for 2 times (you will hear the beep for each time),
then the display will go back to the clock. If you wish to
change the tuning frequency step, follow the next steps:
2. Press the BAND button again, and it will beep and flash the
FM frequency tuning step. If you wish to change the FM
frequency step, press the TUNING up/down button to select.
a. If this radio was bought in USA, the FM tuning step selections
are 100KHz/step and 200KHz/step.
b. If this radio was bought in Europe, the FM tuning step
selections are 50KHz/step and 100KHz/step.:
If you don’t wish to make any change, don’t press the
TUNING up/down button.
3. Press the BAND button again, and it will beep and flash the
AM(MW) frequency tuning step. Press the TUNING up/down
button to select 9KHz/step or 10KHz/step.
10kHz/step should be selected when you are in Europe.
9kHz/step should be selected when you are in USA.
4. Press the BAND button to complete the setting.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
AUX IN socket
Plug in external audio devices such as CD player to the AUX IN
socket (on the side of the radio), then play your device and press
the BAND button repeatedly until you see “AU” on the display.
The radio will amplify and play out the signal form your device.
Headphones
The radio provides a Headphones socket to connect the
headphones set. When plug in the headphones, the speaker
is disconnected.
Display backlight adjustment
Turn the Display Backlight Adjustment button to adjust the back
light level.
Power
There is a battery back up for 10 minutes which means:
when the power is unplugged or during a black-out, the clock and
all the storages will be lost in about 10 minutes.
GB
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical data
Power supply:
120 Volt/60 Hz (USA version);
230 Volt/50 Hz (Europe version)/
ADAPTOR DC OUT 6V/0.5A
Frequency coverage:
FM 87.5 – 108.0 MHz
AM 520 – 1710 kHz (USA version);
AM 522 – 1629 kHz (Europe version)
If at any time in the future you should need to dispose of this product please
note that: Waste electrical products should not be disposed of with household waste.
Please recycle where facilities exist. Check with your Local Authority or retailer for
recycling advice. (Waste Electrical and Electronic Equipment Directive)
13
Download from Www.Somanuals.com. All Manuals Search And Download.
|