SW50USP
Washing Machine
user manual
imagine the possibilities
Thank you for purchasing a Samsung product.
To receive a more complete service,
please register your product at
Download from Www.Somanuals.com. All Manuals Search And Download.
SW50USPIW-02447K_EN(ÀÓ½Ã).indd
1
2009-05-29 ¿ÀÈÄ 3:26:57
safety instructions
Please note that the following precautions for safety intend to prevent unpredictable danger and damage by
helping the proper use in safety.
When using hot water in washing, please make sure that the water should not exceed 50°C.
•
Plastic parts may be deformed or damaged, and an electric shock or a fire may take place.
WARNING
There might be serious injury or fatal accident when you violate this instruction.
•
If the plug (power supply cord) is damaged, it must be replaced by the manufacturer or its
service agent or a similarly qualified person in order to avoid a hazard.
•
Do not pull the cord off or touch it with moist hands.
−
An electric shock or a fire may take place.
Do not bend the power supply cord by force or press it with heavy things.
An electric shock or a fire may take place.
•
•
−
Do not install the washer nearby electric implement or don’t put a candle light or cigarette
light on the washer.
−
A fire may take place.
During operation, do not put your hands or metal materials under the washer.
You may be hurt by spinning board beneath the washer.
Stay away from the washer when the bottom of the washer sinks into the water.
There might be an electric shock. Please wait until the water drains out completely.
•
•
•
−
−
Do not put laundry stained with gasoline, benzene, or alcohol in the washer, and keep the
materials away from the washer.
−
An explosion or a fire may take place.
•
During spinning, don’t put your hand in the spinning tub.
−
It may hurt your hands. If it does not stop within 15 seconds after you open the lid, call
service agent immediately.
•
•
•
This appliance has to be connected to the plug endurable to proper power consumption.
This appliance has to be positioned so that the plug is accessible after installation.
No user-serviceable parts inside. Refer any servicing to qualified service personnel.
−
−
Otherwise this may cause a mechanical error, electric shock, fire or physical damage.
The product warranty does not cover problems resulting from disassembling the product.
•
•
Do not use this product for business purposes.
For washing machines with ventilation openings in the base, that a carpet must not obstruct
the openings.
Safety instructions_3
Download from Www.Somanuals.com. All Manuals Search And Download.
SW50USPIW-02447K_EN(ÀÓ½Ã).indd
3
2009-05-29 ¿ÀÈÄ 3:26:58
safety instructions
CAUTIONS
There might be a slight injury or damage when you violate this instruction.
•
•
•
Don’t install it in the area with moisture or outdoor where it has rain or snow.
An electric shock or a fire may take place.
Please unplug the power supply cord when you do not use it.
An electric shock or a fire may take place.
If there is dust or water on the power supply plug and its connected part, please remove it
completely.
−
−
−
An electric shock or a fire may take place.
Do not make your children look into the inside of the washer.
If your child falls into the washer, their life could be in danger.
Ventilate immediately without touching the power plug if gas is leaking.
An electric shock or a fire may take place if it catches flame.
If the washer makes strange noise, smell or smoke, unplug it promptly and call service agent.
An electric shock or a fire may take place.
When cleaning, don’t spray water to the parts of the washer directly.
•
•
•
•
−
−
−
−
It may make its life span shorten.
Also an electric shock or fire may take place.
•
•
Don’t use several appliances together with an outlet.
A fire may take place due to unusual heat.
Don’t press the button with an awl or pin.
An electric shock or a fire may take place.
−
−
•
•
Use the new hose-sets and old hose-sets should not be reused.
If the damage is found on the current cord in use, it should be replaced by manufacturer,
service center or authorized person in order to avoid the risk.
•
•
•
Connect the grounding wire to the shell plate, and bury it under at least 25cm of earth:
alternatively, connect the ground wire to the appropriate pin on a properly grounded power
receptacle. Never connect the w ire to a telephone line, lightning rod, or gas pipe.
If this appliance is supplied from a cord extension set or electrical portable outlet device, the
cord extension set or electrical portable outlet device must be positioned so that it is not
subject to splashing or ingress of moisture.
This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance by a person responsible for
their safety.
•
•
Children should be supervised to ensure that they do not play with the appliance.
The appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance by a person responsible for
their safety.
•
If the appliance is supplied from a cord extension set or electrical portable outlet device, the
cord extension set or electrical portable outlet device must be positioned so that it is not
subject to splashing or ingress of moisture.
4_Safety instructions
Download from Www.Somanuals.com. All Manuals Search And Download.
SW50USPIW-02447K_EN(ÀÓ½Ã).indd
4
2009-05-29 ¿ÀÈÄ 3:26:58
contents
6
7
Description of part
Checking before washing and caring for
garments
SETTING UP YOUR WASHER
6
9
How to wash automatically depends on the
laundry
10 Control Panel
15 Manual functions
MANUAL FUNCTIONS
15
16 Environment
16 Levelling
INSTALLATION & MAINTENANCE
16 Connecting the water supply hose
18 Assembling the rat protection panel
18 How to connect the drain hose
19 How to put the detergent in
19 How to add the fabric softener
19 Water supply connector filter
20 Cleaning the filter
16
20 How to clean the pump filter
20 Precautions
21 Troubleshooting
TROUBLESH2OOT1ING
22 Washing machine won’t work?
WASHING MACHINE WON’T2WO2RK?
SPECIFICATION
23 Specification
23
Contents_5
Download from Www.Somanuals.com. All Manuals Search And Download.
SW50USPIW-02447K_EN(ÀÓ½Ã).indd
5
2009-05-29 ¿ÀÈÄ 3:26:58
setting up your washer
DESCRIPTION OF PART
The User’s Manual is for common use.
Make use of the User’s Manual depending upon your washing machine model.
Lid
Be sure to keep the lid
closed during washing and
spinning.
Filter
Water supply hose (Hot)
Water supply hose (Cold)
Drain hose (Pump)
Lint will be collected in the
filter during washing.
Detergent box
Fabric softener
Spin basket
Power cord
dispenser
Pulsator
Ground lead
When the water pipe is
metal, make sure to cover
the end of the ground wire.
Front control
panel
Adjustable legs
Adjust the length
of the legs when
installing the
washer.
Rat protection panel
6_Setting up your washer
Download from Www.Somanuals.com. All Manuals Search And Download.
SW50USPIW-02447K_EN(ÀÓ½Ã).indd
6
2009-05-29 ¿ÀÈÄ 3:26:58
CHECKING BEFORE WASHING AND CARING FOR GARMENTS
Must follow the checkpoints in order to avoid machine problems or damages on garments.
•
If the below problems are caused by customer’s faults, separate service fee will be charged.
Checkpoints Before Starting Washing
Check if the clothes are bleaching or not.
•
Add liquid detergent to a white towel and the garment where you can’t notice well. Then, rub
together strongly. Check if the color transferred to the towel.
•
•
•
•
Be careful for scarves and imported clothes since they are easily discoloring.
Check for stains or partial dirt.
If stains are found, use the towel wet with detergents to rub on in a single direction.
Before washing, the sleeves, collar, dress hem and pockets are pre-treated by brushing with
detergents.
The wrinkle-processed clothes made of wool are specially treated by fixing them with
threads before washing. The threads shall be removed after the clothes are dried.
Not washable laundry
Clothes those are easily transformable even by soaking in water.
•
Even by soaking in water, neckties, brassieres, jackets, suits and coats can be easily
transformed like shrinking and discoloring on the garment surfaces because they are mostly
made of rayon, polynosic, cuff and their blend fabrics.
•
•
•
The wrinkle-processed, embossed, or resin processed products are easy to transform even
by soaking in water.
Easily discoloring products made of cotton and wool, wrinkled silk, leather products, leather
accessory, leather ornamented clothes and its accessory.
Don’t wash those clothes without handling guideline or material indication tag.
About Detergent
•
When detergents are not dissolving well, use warm water (about 40°C) to dissolve the
detergent.
•
•
Use an appropriate amount.
Even if excess amount of detergent is used, there is not much difference in washing
result. It may cause damages to the garments because rinsing is not enough.
CAUTION
•
•
The bleaching agent may cause damages to garments since it is strong alkali.
Do sufficient rinsing because the powder detergent is easily remained on the
garments causing bad odors.
•
•
If too much detergent is used or cold water is used, it doesn’t dissolve completely
and remain on the garments, hose or spin basket, causing contamination on clothes.
In case of reserved washing, detergents must be put in the detergent box. If the
powder detergents are spread on laundry directly, it may cause discoloration.
Setting up your washer_7
Download from Www.Somanuals.com. All Manuals Search And Download.
SW50USPIW-02447K_EN(ÀÓ½Ã).indd
7
2009-05-29 ¿ÀÈÄ 3:26:58
setting up your washer
CARING FOR CLOTHES BEFORE WASHING
Take out personal belongings from pockets.
•
Caution, Check the pockets! Hairpins and coins cause damages to
clothes and washing machine. They make noise and problems to
the machine. Must check the pocket.
If pants zippers are open while washing, the spin basket may be damaged. The zipper
should be closed and fixed with a string before washing.
•
•
Metal on the clothing may cause damage to the clothes and the tub.
Turn clothing with buttons and embroidered clothes inside out the
before washing them.
•
Clothing with long strings may become entangled with other clothes,
and may cause damage to the clothing. Be sure to fix the strings
before washing.
Waterproof clothes (Ski Wear, Diaper Covers, Footboards) are not allowed for washing.
•
This may cause the laundry to be ejected or cause the washing machine to vibrate
abnormally, which may result in personal injury or damage the washing machine, the floor
or the clothing. (Diapers, waterproof clothing, raincoats, umbrella covers, skiwear, car cover
sheets, and sleeping bags, etc.).
•
When the tub rotates, water may become trapped in the waterproof clothing or fabric and
can collect in a corner, causing abnormal vibrations. In addition, the laundry rises and may be
ejected and cause personal injury.
Shake the dirt or soils from clothes.
•
Soil and sands may rub delicate garments to cause damages and the washing result may be
unsatisfactory.
Do pre-washing for white socks, sleeves, and collars before the main washing.
•
For stains and dirt on collars, sleeves, hems, and pockets, apply some detergent to them
and apply it lightly with a brush before washing.
•
Use powdered or liquid detergent. Do not use soap as the tub may become dirty from the
dirt on it.
Turn inside out for those nappy clothes before washing.
•
If clothes have too much foreign matter, separate them for washing.
Other clothes may pick up those dirty matters (dirt, thread).
•
Wash black colored clothes and cotton towels separately. If they are
washed together, towels may pick up dirty matters. Check before
washing.
Cashmilon and those garments having big volume and lightweight (eg. Lasedecorated
clothes, lingerie, nylon stocking, synthetic fabrics etc.) may rise and cause damages to
the clothes and problems to the machine. Use the laundry net or wash them separately.
•
Must put those long stringed clothes, lase-worked clothes, bed cover
sheet, wool clothes into a laundry net before washing.
•
•
Put delicate clothes in the laundry net.
Use only those commercial laundry net for washing.
Curtains, floating garments or blue jeans shall be pressed not to float on the water.
•
If they are floated on the water, press Start/Hold button to stop and press them to sock in
the water. If the washing goes on with clothes floating on the water, it may cause damages to
the clothes and the washing machine as well as unsatisfactory washing result.
8_Setting up your washer
Download from Www.Somanuals.com. All Manuals Search And Download.
SW50USPIW-02447K_EN(ÀÓ½Ã).indd
8
2009-05-29 ¿ÀÈÄ 3:26:59
HOW TO WASH AUTOMATICALLY DEPENDS ON THE LAUNDRY
Before starting washing, check the following;
•
Connect the water supply hose to the water tap. Leave a tap open. Plug the power cord in. Make sure
to lay down the drain hose.
Washing for the first time
Before washing clothes for the first time, you must run a complete cycle without clothes.
To do this:
1. Press the Power button.
2. Open the detergent drawer and insert a little detergent.
3. Turn on the water supply to the washing machine.
4. Press the Start/Hold button.
This will remove any water from the manufacturer’s test run remaining in the machine.
Special notes!
Automatic Sensing Function
•
At every course (except Clean tub, delicate course) the amount of laundry is automatically
sensed and then appropriate water level, washing time, rinsing cycle, and spinning time are
automatically selected for automatic washing.
•
After the power is on, a course is selected and Start/Hold button is pressed. Then, the
washing board starts spinning without water. This action senses how much laundry is in
the washing basket, not a machine problem. After this sensing process, water supplies
automatically.
Adding Detergent and Softener
•
It senses the amount of laundry and indicates the water level and amount of detergent. Then,
it starts water supply right away.
•
During the water supply, it is possible to open the detergent box and add detergent.
However, it is better to press Start/Hold button to stop water supply and add detergent.
Close the lid and press Start/Hold button again. This way is much more convenient.
•
If the softener is inserted in the softener dispenser, it automatically adds in at the last rinsing
cycle.
Put the laundry into the washer and add detergent, too.
Be careful not to overload. Use right detergent for the fabrics you are washing.
•
•
•
•
If the lid is open while running, the washing machine is stopped automatically for safety.
(Except, water supply continues while the lid is open.)
When hot water is selected, both cold and hot water are supplied for the first 20
seconds in order to protect the clothes.
Possible to control the washing time, rinsing cycle, and spinning time at every course
during the washing.
Setting up your washer_9
Download from Www.Somanuals.com. All Manuals Search And Download.
SW50USPIW-02447K_EN(ÀÓ½Ã).indd
9
2009-05-29 ¿ÀÈÄ 3:26:59
setting up your washer
CONTROL PANEL
For more details, see control panel of your washing machine.
14
13
12
11
10
9
8
7
6
5
4
3
2
1
Press this button once to operate.
Press it again to turn the power off.
1
2
POWER BUTTON
Press this button once to operate.
Manually select the functions to use. (Course, Air Turbo, Rinse count)
Your choices are automatically saved when pressing the Start/Hold button.
To use a memorized course, press the Memory button and then press the
Start/Hold button.
- The memorized functions will be displayed on the panel.
MEMORY BUTTON
Insert some detergent and rinse detergent in proportion to the water level
and close the cover.
This function allows frequently used functions to be memorized so that they
can be easily used when needed.
Use to pause and restart the operation.
To change the washing procedure during an operation,
press this button to stop, and again to restart after changing the procedure.
START/HOLD
BUTTON
3
4
5
Each time the button is pressed, the washing course changes;
Fuzzy Blanket Delicate Clean Tub Quick Econo Super
clean Easy
COURSE SELECT
BUTTON
Press this button to finish the wash at a specified time.
Turn off your washing machine to cancel a reserved delay start.
You can set the delay start time from between 3 to 18 hours.
DELAY START
BUTTON
When the wash is finished, the warning lamp lights up on the filter check.
When the door is opened, it turns off. (This is not a fault.)
FILTER CHECK
6
When the Magic filter is clogged, foreign materials may start sticking to the
laundry. To ensure a clean wash, please remove foreign materials from the
filter after every wash.
Press this button to perform a spin cycle only or to adjust the spin time.
You can set the spin time from between 1 to 9 minutes.
When only a spin is selected, the spin time will be different from the total
remaining time. This is because the total remaining time includes the actual
spin time and the times for water draining and stopping.
7
8
SPIN BUTTON
Press this button to perform a rinse only or to adjust the rinse count.
You can set the rinse count up to five times.
RINSE BUTTON
10_Setting up your washer
Download from Www.Somanuals.com. All Manuals Search And Download.
SW50USPIW-02447K_EN(ÀÓ½Ã).indd 10
2009-05-29 ¿ÀÈÄ 3:26:59
Press this button to perform a wash only or to adjust the washing time.
You can set the wash time from between 4 to 30 minutes.
9
WASH BUTTON
SOAK BUTTON
Press this button to perform a soak wash.
This function cannot be selected during a Delicate course.
Soaking is automatically applied during a Clean tub course.
You can set the soak time from between 10 to 60 minutes.
10
11
Displays the remaining wash time.
Displays the reserved delay start time.
Displays the error state if a problem occurs in the washing machine so that
you can take action.
REMAINING TIME,
DELAY START
TIME, ERROR
DISPLAY
Press this button to fast dry your laundry. Each time the button is pressed,
the selection changes in the following order.
30 Min 15 Min Off 30 Min
AIR-TURBO
BUTTON
12
This function can only be selected if a spin cycle is set.
The water level is automatically adjusted. However, you can select the water
level manually by pressing this button.
Mid High Mid Low Extra low Low Mid
WATER LEVEL
BUTTON
13
14
WATER SUPPLY
BUTTON
Each time this button is pressed, the type of water is selected as follows,
Cold Cold & Hot Hot Cold
Setting up your washer_11
Download from Www.Somanuals.com. All Manuals Search And Download.
SW50USPIW-02447K_EN(ÀÓ½Ã).indd 11
2009-05-29 ¿ÀÈÄ 3:27:00
setting up your washer
FUZZY COURSE
Selects the best washing course automatically.
1. Press the Power Button to “On”.
2. Press the Start/Hold button.
Water level is selected automatically. Washing rinsing, and spinning follow.
If you want to pause, press the Start/Hold button again. You can change the course when
paused.
3. Close the lid.
BLANKET COURSE
(Big volume laundry like blanket and bed cover sheets)
1. Press the Power button to “On”.
2. Press the Course select button once.
3. Press the Start/Hold button.
Water level is selected automatically. Washing, rinsing, and spinning follow. If you want to
pause, press the Start/Hold button again. You can change the course when paused.
4. Close the lid.
•
Fold those big volume laundry (blanket and bed
cover sheets) in the following way before adding into
the spin basket.
•
•
Do not wash the electric blanket and carpets.
Get a laundry net for those light and big volume
laundry (eg. Cashmeres) because they might rise in
the water and get damaged.
DELICATE COURSE
Washable sweater, cardigan, delicate clothes etc.
1. Press the Power button to “On”.
2. Press the Course select button twice.
3. Press the Start/Hold button.
Washing, rinsing, and spinning follow. If you want to pause, press
the Start/Hold button again. You can change the course when paused.
4. Close the lid.
-
-
-
You can only select cold water.
The last spin operates lightly to prevent wrinkles.
Use the detergent indicated in the laundry.
CAUTION
•
In the Delicate course, the Soak & Air Turbo cannot be selected as it could damage the
washed items.
12_Setting up your washer
Download from Www.Somanuals.com. All Manuals Search And Download.
SW50USPIW-02447K_EN(ÀÓ½Ã).indd 12
2009-05-29 ¿ÀÈÄ 3:27:01
CLEAN TUB COURSE
Use this course to clean the tub. It will keep the tub clean and sanitary.
1. Press the Power button to “On”.
2. Press the Course select button three times.
3. Press the Start/Hold button.
4. Add a delicated detergent and close the lid
-
Never place laundry in the tub when cleaning inside the tub, as this can cause
discoloration or damage to the laundry.
-
When doing the laundry after cleaning the tub, you may find some impurities. These
are just detergent residues and impurities after the tub cleaning. Perform the rinse
cycle two to three times.
-
-
The Soak function (20 minutes) is set automatically.
The water level is set to Mid early on and then changed to High during the rinse.
KEEPING THE TUB CLEAN
When using the machine under humid conditions for an extended time, various bacteria from
the air may stick to the tub and form black dirt (fungi), causing damage to the human body.
To keep the tub clean and hygienic at all times, it is recommended reading “CLEAN TUB
COURSE” above and using only dedicated or recommended detergents to clean the tub
regularly at least once every one to three months.
QUICK COURSE
If you want to wash those frequently used towels or less dirty laundry time.
Because washing is speedy, it is good for light or less stained laundry.
1. Press the Power button to “On”.
2. Press the Course select button four times.
3. Press the Start/Hold button.
Water level is selected automatically. Washing, rinsing, and spinning follow. If you want to
pause, press the Start/Hold button again. You can change the course when paused.
4. Close the lid.
ECONO COURSE
Econo wash, high water level, cold & hot water temperature is the wash program suitable for a
‘normally soiled cotton load’.
1. Press the Power button to “On”.
2. Press the Course select button five times.
3. Press the Start/Hold button.
Water level is selected automatically. Washing, rinsing, and spinning follow. If you want to
pause, press the Start/Hold button again. You can change the course when paused.
4. Close the lid.
Setting up your washer_13
Download from Www.Somanuals.com. All Manuals Search And Download.
SW50USPIW-02447K_EN(ÀÓ½Ã).indd 13
2009-05-29 ¿ÀÈÄ 3:27:02
setting up your washer
SUPER CLEAN COURSE
Use for cleaner washing.
1. Press the Power button to “On”.
2. Press the Course select button six times.
3. Press the Start/Hold button and put the proper amount of detergent into tub.
Water level is selected automatically.
Water level is only selected High~Low.
4. Close the lid.
EASY COURSE
When selecting this course, Air Turbo is selected automatically.
1. Press the Power button to “On”.
2. Press the Course select button seven times.
3. Press the Start/Hold button.
Water level is selected automatically. Washing rinsing, and spinning follow. If you want to
pause, press the Start/Hold button again. You can change the course when paused.
4. Close the lid.
DELAY START
How to reserve washing?
Select this course when you have to go out or do something else.
1. Press the Power button to “On”.
2. Press the Course select button.
3. Press the Delay Start button once.
You may change the delay start time with use the Delay
Start button. (from 3 hours to 18 hours)
4. Press the Start/Hold button and put the proper amount of detergent into tub.
5. Close the lid.
The washing finishes by the time you reserved. Add detergent and softener in proportion to
the water level. Then, close the lid.
•
•
Must add the detergent in the detergent box.
If the detergent is spread on the laundry directly, some clothes may get discolored as
the start delays.
•
•
If the Delay Start needs to be canceled, press the Power button.
The reserved finish time may be changed depends on the water pressure.
14_Setting up your washer
Download from Www.Somanuals.com. All Manuals Search And Download.
SW50USPIW-02447K_EN(ÀÓ½Ã).indd 14
2009-05-29 ¿ÀÈÄ 3:27:03
manual functions
Possible to select the function for each course.
(Example) For a simple washing as the little dirt course :
Power Select the little dirt course Wash Start/Hold
SOAK FUNCTION (Including WASH, RINSE, SPIN)
Press the Power button.
Press the Soak button once.
Press the Start/Hold button once.
Water level is selected automatically.
Washing,rinsing, and spinning follow.
WASH ONLY
Press the Power button.
Press the Wash button.
Press the Start/Hold button.
Washing goes on for 15 minutes.
When the Wash button is pressed during washing, the wash time can be
changed to between 4 and 30 minutes in duration.
RINSE ONLY
Press the Rinse button.
Press the Start/Hold button.
Rinsing goes on for 2 times.
When the Rinse button is pressed during rinsing, the rinse times can be
changed to between 2 to 5 times in duration.
SPIN ONLY
Press the Spin button.
Press the Start/Hold button.
When the Spin button is pressed during spinning, the spin time can be
changed to from 1 to 9 minutes.
WASH AND RINSE
Press the Wash and Rinse button.
Press the Start/Hold button once.
Detects the amount of laundry, and determines wash and rinse time
period automatically.
When the Wash and Rinse button is pressed during working.
Wash time period is determined between 4 and 30 minutes, and rinse
time is determined between 1 and 5 times.
RINSE AND SPIN
Press the Rinse and Spin button.
Press the Start/Hold button once.
Rinsing and spin drying follow.
When the Rinse and Spin button is pressed during working. The number
of rinse times is determined between 2 and 5, and spin time period for
drying is determined between 1 and 9 minutes.
WASH, RINSE AND SPIN
Press the Wash, Rinse and Spin button.
Press the Start/Hold button once.
Wash, Rinse and Spin is performed.
Manual functions_15
Download from Www.Somanuals.com. All Manuals Search And Download.
SW50USPIW-02447K_EN(ÀÓ½Ã).indd 15
2009-05-29 ¿ÀÈÄ 3:27:05
installation & maintenance
The User’s Manual is for common use.
Make use of the User’s Manual depending upon your washing machine model.
ENVIRONMENT
Leave some space
Maintain at least 10cm between the washer and the wall.
Place the washer on a sturdy flat surface.
If the washer is placed on an uneven or weak surface, noise or vibration occurs. (Allowable is 1˚)
Adjust the legs for even placement.
Never install the washer near water.
Do not place the washer in steamy rooms or where the washer is directly exposed to rain. Moisture may
destroy the electrical insulation causing an electrical shock hazard.
Avoid direct sunlight or heaters.
As plastic an electrical components are affected by direct heat, never place the washer near furnaces,
boilers, etc. Do not place under direct sunlight.
LEVELLING
•
If the washer is not leveled with the ground, it makes the machine tremble more or be out of order. So,
make sure that the washer is leveled properly.
SEE IF THE MACHINE IS PLACED LEVEL BY CHECKING
THE POSITION OF THE WASHING TUB.
Water
•
Open the lid of the machine, pour water into the tub up
to the level just below the pulsator, and adjust the legs so
that the pulsator is positioned at the center of the water as
shown in the figure.
•
•
Place the machine more than 10cm away from the wall.
Adjust the legs on feet for levelling.
LOOSEN
LOCK
CONNECTING THE WATER SUPPLY HOSE
Check the type of tap fitting which is in your laundry and then see appropriate instruction below:
A tap of ordinary type is desirable
ORDINARY TAP
SQUARE TAP
ROTATING TAP
In case of square tap
•
Take out the internal part of the connector and join it in the following way.
Internal part
16_Installation & maintenance
Download from Www.Somanuals.com. All Manuals Search And Download.
SW50USPIW-02447K_EN(ÀÓ½Ã).indd 16
2009-05-29 ¿ÀÈÄ 3:27:06
1. Remove the adaptor from the water supply hose.
2. First, using a “+” type screw driver, loosen the four screws
on the adaptor. Next, take the adaptor and turn part(b)
following the arrow for gap about 5 mm between them.
3. Connect adaptor to the water tap by tightening the screws
firmly. Then, turn part(b) following the arrow and put (a) and
(b) together.
a
b
4. Connect the water supply hose to the adaptor. Pull down
the part (c) of the water supply hose. When the part (c)
is released, the hose is automatically connected to the
adaptor making a ‘click’ sound.
c
5. Connect the other end of the water supply hose to the
inlet water valve at the back of the washer. Screw the hose
clockwise all the way in.
5-1. Connect the other end of the water supply hose to the
inlet water valve at the top of the washer. Screw the hose
clockwise all the way in.
•
If the water tap is a screw type, assemble a water supply
hose that fits to the tap as shown. After completing
connection, if water leaks from the hose, then repeat the
same steps.
After completing connection, if water leaks from the hose, then repeat the same steps.
Use the most conventional type of faucet for water supply.
In case the faucet is square or too big, remove the spacing ring before inserting the faucet
into the adaptor.
Installation & maintenance_17
Download from Www.Somanuals.com. All Manuals Search And Download.
SW50USPIW-02447K_EN(ÀÓ½Ã).indd 17
2009-05-29 ¿ÀÈÄ 3:27:09
installation & maintenance
ASSEMBLING THE RAT PROTECTION PANEL
Tilt the washer a little and lift up the panel until it clicks, finally fix the panel with screw
to the base as shown in the figure.
Rear-side
1. Insert the rat protection panel to the
2. If you have difficulty inserting the panel lift
assembling hole on back side to the end.
up the washer a little and insert it.
HOW TO CONNECT THE DRAIN HOSE
IN CASE OF PUMP-DRAINED WASHER
cap-hose
Take out the cap-hose and connect the
outlet-hose.
Be sure to join tightly the drain hose into the
drainoutlet on the back of the machine.
Be sure to join tightly the drain hose into the Install the drain hose in the position of about
drain-outlet on the side of the machine. 90~100cm above the ground.
18_Installation & maintenance
Download from Www.Somanuals.com. All Manuals Search And Download.
SW50USPIW-02447K_EN(ÀÓ½Ã).indd 18
2009-05-29 ¿ÀÈÄ 3:27:12
HOW TO PUT THE DETERGENT IN
1. Open the detergent box by pulling in the direction of the arrow as shown in the
figure and then put the powder detergent in the detergent box.
2. Put in one-time amount of detergent evenly so the detergent may not brim
over the box.
HOW TO ADD THE FABRIC SOFTENER
Slide and open the cover in the direction of the arrow, insert the rinse detergent, and slide and close it in the
reverse direction.
•
When a proper amount (one time does) of fabric softener is stored in the softener
inlet, it is automatically put in at the last rinsing cycle.
•
•
•
Do not use detergent, bleach or starch into the Softener Inlet.
Using too much softener may produce unsatisfactory results.
Do not open the lid during the Spin Dry cycle. If added too early, its effectiveness
will decrease.
•
Do not leave the softener into the Softener Dispenser for a long time. Because
softner became stiff.
WATER SUPPLY CONNECTOR FILTER
1. Pull out the filter and wash well.
2. Pull in the filter and connect the hose to the inlet water
valve tightly.
3. Check if there is a leakage.
Note to tighten up the connector.
Installation & maintenance_19
Download from Www.Somanuals.com. All Manuals Search And Download.
SW50USPIW-02447K_EN(ÀÓ½Ã).indd 19
2009-05-29 ¿ÀÈÄ 3:27:13
installation & maintenance
CLEANING THE FILTER
Clean the filter net often to keep the washer clean.
1. Push the upper part of the Magic filter
2. Open the cover as shown in the figure.
and pull in.
3. Clean the Magic filter.
4. Close the cover and insert the lower part of
the filter in the basket first and then push
the filter with “click” sound.
HOW TO CLEAN THE PUMP FILTER
REAR SIDE
1. Place a rag under the washer filter not to wet the floor.
2. Rotate the filter counterclockwise and pull out the filter.
3. Remove dirts and rotate the filter clockwise until it locks in position.
OPEN
CLOSE
FILTER
RAG
PRECAUTIONS
WARNING! NOTE THE FOLLOWING PRECAUTIONS TO PREVENT ELECTRICITY
LEAKAGE AND THE POSSIBILITY OF ELECTRIC SHOCK.
Earthing is necessary to prevent leakage or electric shocks caused by the electric currents leaked from the machine.
How to earth an outlet with earthing terminals when an
earthed power load is not fitted.
Earthing
terminals
Outlet with earthing terminals:
•
Even when the internal wires of the earthing terminals are joined,
connect the earthing conductor (green) of the machine to the tap.
When using an extension cord and a boosting transformer:
•
Make sure that the earthing conductor is connected.
Earthing
conductor
Never make an earthing to
Gas pipe
•
The telephone line, lightning rod, or gas pipe as it is
extremely dangerous in case of lightning strikes.
Earthing
conductor
20_Installation & maintenance
Download from Www.Somanuals.com. All Manuals Search And Download.
SW50USPIW-02447K_EN(ÀÓ½Ã).indd 20
2009-05-29 ¿ÀÈÄ 3:27:15
troubleshooting
PROBLEM
CHECK
Washing machine won’t work
- Is the water tap opened?
- Is the washer plugged in?
- Is the power cut off?
- Is there enough water?
Water dose not drain
- Is the drain hose down?(No pump)
- Is the drain hose frozen?
- Is the drain hose clogged?
- If the water dose not drain, a buzzer will sound, and the
remaining time indicator will show “5E”.
Water is not supplied
- Is the water tap opened?
- Is the water cut off?
- Is the water supply hose or hose connection clogged?
- Is the water tap frozen?
- If the water supply is not finished in 1 hour or there is no change
in the water level 4 minutes after the water supply has started,
the buzzer rings and “4E” is displayed
on the remaining time indicator.
Spinning does not work
- Is the laundry spread out evenly in the washer?
- In the washer set on a sturdy flat surface?
Water is overflowed
- Restart after spinning.
- If the error sign still indicates, call agency.
Troubleshooting_21
Download from Www.Somanuals.com. All Manuals Search And Download.
SW50USPIW-02447K_EN(ÀÓ½Ã).indd 21
2009-05-29 ¿ÀÈÄ 3:27:16
washing machine won’t work?
PROBLEM
CHECK & SOLUTION
The power is cut off.
Is the electric voltage normal?
Is the washer plugged in? Plug in the electric cord.
Water does not drain.
Is the drain hose down? Put the drain hose down.
Is the drain hose folded? Unfold the drain hose.
Is the drain hose outlet clogged? Remove the waste cleanly.
Washing machine won’t work.
Is the washer lid open?
Close the lid.
Is the Hold button on?
Press the Start/Hold button one more time and check if the
washer starts.
Is enough water filled to the water level?
If the water pressure is low, it takes a long time to start
washing.
Is the faucet closed?
Open the faucet to supply water.
If the drain hose and spin basket
are frozen, do as follows.
•
Add hot water to the frozen water tap and remove the drain
hose. Soak into hot water.
•
•
•
Pour hot water into the spin basket for about 10 minutes.
Put a hot water towel on the drain hose connector.
If the drain hose defrosts, connect again and check for proper
water draining.
The water drains out immediately.
•
The drain is clogged with coins or pins. The drain hose is
hung over the drain hose hook. Half fill the spin basket with
water and try for spinning again.
The water leaks at the water
supply hose connector.
If the faucet connecting part is loose, water may leak.
Repeat the assembling steps again. (Refer to “Connecting the
water supply hose”)
Check if the rubber packing of water supply hose is in the right
position.
Screw tightly again.
Is the water supply hose folded?
Unfold the hose.
If the water supply is too strong, water may leak.
Close the faucet a little.
Is water leaking from the faucet itself?
Fix the faucet. Water is not supplied.
22_Washing machine won’t work?
Download from Www.Somanuals.com. All Manuals Search And Download.
SW50USPIW-02447K_EN(ÀÓ½Ã).indd 22
2009-05-29 ¿ÀÈÄ 3:27:17
PROBLEM
CHECK
The water leaks at the water
supply hose connector.
Did you press the Start/Hold button after selecting the water
supply?
If the Start/Hold button is not pressed, water is not supplied.
Press the Start/Hold button.
Is the faucet closed?
Turn on the faucet.
Is the filter net at the water supply hose connector clogged with
dirty matters?
Clean the filter net by brushing with a toothbrush.
Is the water supply cut off?
If the water supply is suspended, turn off the faucet and
power off.
Spinning makes loud noises and
vibrations.
Check if the laundry is spread evenly in the washer.
Spread out the laundry evenly and start again.
Check if the washing machine levels on a sturdy flat floor.
Set the machine at level.
Is the handle for leveling legs loose?
Adjust the legs on the feet for leveling.
Is around the washing machine filled with unnecessary stuffs?
Remove those unnecessary things away from the wash
machine.
specification
SW50USP
MAX. MASS OF DRY
CLOTH IN kg
5.0 kg
HIGH
60 l
WASH
SPIN
330 W
240 W
POWER
CONSUMPTION
STANDARD
WATER
MID
54 l
LEVEL
DIMENSIONS(mm)
WEIGHT
W540 X D560 X H856
LOW
45 l
EXTRA
LOW
31 kg
28 l
0.05~0.78 MPa
WATER PRESSURE
WATER USAGE
160 l
(0.5 ~ 8.0 kg. f/cm2)
Specification_23
Download from Www.Somanuals.com. All Manuals Search And Download.
SW50USPIW-02447K_EN(ÀÓ½Ã).indd 23
2009-05-29 ¿ÀÈÄ 3:27:17
QUESTIONS OR COMMENTS?
Country
CALL
1300 362 603
OR VISIT US ONLINE AT
AUSTRALIA
Code No. DC68-02447K_EN
Download from Www.Somanuals.com. All Manuals Search And Download.
SW50USPIW-02447K_EN(ÀÓ½Ã).indd 24
2009-05-29 ¿ÀÈÄ 3:27:17
|