User manual
BOSSCOM Bi1 controller installed in a Bang & Olufsen Beo4 remote control.
Operate these devices using the modi ed Beo4:
Samsung LED TV 7 -series and other.
Operate devices that are operate able with RCU’s like:
Samsung most remotes for Samsung digital TV.
Download from Www.Somanuals.com. All Manuals Search And Download.
The BOSSCOM controller for the Beo4 remote control
The BOSSCOM controller is a small microcomputer module, which is speci!cally
made to be built in to a Bang & Olufsen Beo4 remote control.
The controller captures the commands that were meant for operating a Bang & Olufsen
device. Before the commands are emitted from the Beo4, these commands are convert-
ed, and therefore also able to operate a non Bang & Olufsen TV.
Each controller is dedicated for operating a speci!c product like an Apple iPod docking
station, a #at screen TV, a curtain controller etc.
The controller makes the Beo4 able to operate a third part device, still able to operate
any other Bang & Olufsen products.
If there is a Bang & Olufsen audiomaster in the room, it can be used for handling the sound. Speakers con-
nected to an audiomaster are of a much better quality than the speakers in a TV. In a B&O linkroom setup
with Beolink Active or Beolink Passive, you can also use these speakers to improve sound from most TV’s.
Only a simple audio cable is needed between the TV and the audiomaster. See the option programming sec-
tion about AAUX and PC modes on page 11.
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating with BOSSCOM
.
To be able to operate the non B&O TV optimal using the BOSSCOM
the user has to be familiar with the operations available when using the original remote
control, as described in the TV’s user manual.
A beo4 remote control is not equipped with as many keys as most remote controls for
non B&O devices. We have designed an operation ‘layout’ that works logically, even
common layout
ns to other
BOOSCOM
for ma
functions.
The Beo4 Navi model introduces new buttons, making it easier to make operation
table’s, closer to the TV’s own.
Coloured function buttons.
To make room for easy access to more important functions, in some layouts we have
moved the coloured function buttons, to a lower layer. In these layouts to send a ‘color’
command, a
must be pressed before the coloured button itself.
This way we are able to assign other functions to the coloured buttons in direct mode.
gned to these opera-
In a BOSSCOM environment the coloured buttons are often assi
tions:
Guide, EPG or similar.
Back, Backup, Return or similar.
Programme zapping. P+/ P- ,
Channel up/ down or CH+/ CH-.
Go, Navi or Stop shifted operation.
Some of the buttons has two or three operations. To get to these they have to be preced-
ed withO or
.
In case of Beo4 Navi a
in ‘mode 2’. In mode 2 the BOSSCOM uses the Center button f
. Refer to page 10.
button has been a added to replace the button, when
or shifting, instead of
Buttons that has been assigned secondary functions are listed in the operating table on
page 9.
Download from Www.Somanuals.com. All Manuals Search And Download.
Programme stepping, up/ down manoeuvring in menus.
Most set top boxes and TV’s has 4 arrow buttons for manoeuvring in or screen menus,
up, down, left and right. In addition they are equipped with separate programme step-
ping buttons for zapping through the programme list. Often these keys are named P+, P
-, CH+ or CH -.
BOSSCOM often makes use of the
and the
keys for programme zap-
ping. This way the four up, down, left and right buttons are free to be used for the more
natural use of manoeuvring in on screen menus.
Using a Beo4 Navi in mode 2, manoeuvring in On-screen menus is fully handled using
the added ‘joy-stick’, not available on previous Beo4 models. In a Beo4 Navi setup we
therefore can make use of the up and down arrows for programme zapping.
Setting the Zap Mode Option
If the BOSSCOM controller is not set to operate in Navi mode, the Beo4 but-
tons
and
are used for programme stepping. The
and
buttons
are used to manoeuvre up and down in an o-sncreen menu. This is the default factory
setting, as described above.
Selecting the Zap mode buttons:
Enter one of these 2 codes within 10 seconds to set the pre"ered Programme Zap mode buttons.
The
and
buttons will be used for pro-
buttons will be used for pro-
gramme zapping.
The
&
gramme zapping.
Download from Www.Somanuals.com. All Manuals Search And Download.
Disabling and Dual TV Option
The BOSSCOM controller in the modi!ed Beo4 remote control can be enabled or disa-
bled using this option. When disabled the Beo4 remote control operates as a Beo4 that
has not been modi!ed.
In DUAL TV -mode the BOSSCOM controller enables operation of both a B&O TV and
the non B&O TV which the controller is made to operate.
Disabling and Dual TV mode:
Enter one of these 3 codes within 10 seconds to set the pre"ered mode.
Disables the BOSSCOM controller.
Enables the BOSSCOM controller.
Enables the BOSSCOM controller in Dual TV mode.
In this mode:
starts operating a B&O TV.
starts operating the non B&O TV
Download from Www.Somanuals.com. All Manuals Search And Download.
Translation table when NOT in Navigation mode.
* see page 10
Daily operation
Turns on the TV
Turns o! the TV
Text TV operation
Text TV on/ mix
Text TV o!
Enter
Prog +
Prog -
TTV page+
Playback operations
TTV page -
Play press 1 sec.
Stop
Pause
Guide
Return
TTV Hold
Rew/ FF
Record
Exit
Source
Menu
TTV Index
Other operations
FAV
Channal list
info
Tools
TTV Hide
TTV Show
TTV Size
Content
Subtitle
Media Play
Internet
*1 The up/ down arrow operations can be ex-
changed with the blue and yellow buttons. See
page 6.
*2 As the direct function of the coloured func-
tion buttons has been assigned to other func-
tions, these have to be preceded with a
to retrieve the actual coloured function.
Special/ alternative operations
Play
Record
3D
Green function
Yellow function
Red function
AD
Blue function
Download from Www.Somanuals.com. All Manuals Search And Download.
Translation table when IN Navigation mode.
* see page xxxxxx
Daily operation
Turns on the TV
Turns o! the TV
Text TV operation
Text TV on/ mix
Text TV o!
Enter
CH+ / CH -
REW / FF
Playback operations
Play
Stop
Pause
Navi buttons are used for manoeuvring in o-n
screen menus.
Record
Yellow key
Blue key
Green key
Red key
Other operations
FAV
Exit
Channal list
info
Tools
Content
Subtitle
Media Play
Internet
TTV Hide
TTV Show
TTV Size
Back
Source
Menu
TTV Index
EPG
CH List
PRE CH
TOOLS
Special/ alternative operations
Record
3D
AD
Download from Www.Somanuals.com. All Manuals Search And Download.
Beo4 NAVI mode option.
Newer Beo4 models are named Beo4 Navi due to an added special navigation button.
A joystick type control button, placed where previous Beo4 models have a
button.
If your Beo4 has a button, this chapter is not relevant for you !
Use of the Beo4 Navi joystick navigation operation:
Enter one of these 2 codes within 10 seconds to enable or disable the BOSSCOM controllers use of the ex-
Set the Beo4 Navi remote control in operation mode 2, as described in the B&O user guide that was sup-
plied with your Beo4, if you want to use these. Otherwise select mode 1.
Enable use of the NAVI control.
When the BOSSCOM controller NAVI mode has been
enabled, use the operation table on page 9.
Disable use of the NAVI control.
When the BOSSCOM controller NAVI mode has been
disabled, use the operation table on page 8.
Download from Www.Somanuals.com. All Manuals Search And Download.
When the TV mode is selected by pressing the
on the TV and turns on the picture.
button, it automatically powers
But often the sound is lead to external speakers at-
This option set the way that the BOSSCOM handles
volume in TV mode.
This option also can power on other B&O devices
than the TV, when
is selected. Audio is then
typically fed from the TV to the audiomaster from
using a Line to Datalink cable. Moving the TV sound
proves the sound quality.
Volume options
Sound destination Volume control
Download from Www.Somanuals.com. All Manuals Search And Download.
The Beo4 VMEM / VTAPE button option
On your BOSSCOM modi!ed Beo4 remote control, the VMEM button can be pro-
grammed, to open a speci!c source on your non B&O TV.
VMEM/ VTAPE options
Enter one of these codes within 10 seconds, to select the source on the non B&O TV that will be selected
with the VMEM or VTAPE button.
No new source selected.
The AV1 socket on the TV is opened.
The AV2 socket on the TV is opened.
The DTV tuner on the TV is opened.
The Component 1 socket is shifted to.
The Component 1 socket is accessed.
The HDMI 1 socket is accessed.
The HDMI 2 socket is accessed.
S-VHS 1
USB Wiselink
As the BOSSCOM controller is able to operate many di"erent TV models, there might be some sources in the
table, that is not available on your TV. The only way to #nd out if your TV accepts these codes, is testing
each of the options.
If a source is not access able using these options, sources must be accessed the same way as using the TVs
original remote control. Using the source button.
Download from Www.Somanuals.com. All Manuals Search And Download.
The Beo4 DTV/ SAT button option
On your BOSSCOM modi!ed Beo4 remote control, the DTV/ SAT button can be pro-
grammed, to open a speci!c source on your non B&O TV.
DTV/ SAT options
Enter one of these codes within 10 seconds, to select the source on the non B&O TV that will be selected
with the DTV/ SAT button.
No new source selected.
The AV1 socket on the TV is opened.
The AV2 socket on the TV is opened.
The DTV tuner on the TV is opened.
The Component 1 socket is shifted to.
The Component 1 socket is accessed.
The HDMI 1 socket is accessed.
The HDMI 2 socket is accessed.
S-VHS 1
USB Wiselink
As the BOSSCOM controller is able to operate many di"erent TV models, there might be some sources in the
table, that is not available on your TV. The only way to #nd out if your TV accepts these codes, is testing
each of the options.
If a source is not access able using these options, sources must be accessed the same way as using the TVs
original remote control. Using the source button.
Download from Www.Somanuals.com. All Manuals Search And Download.
The Beo4 DVD button option
On your BOSSCOM modi!ed Beo4 remote control, the DVD button can be pro-
grammed, to open a speci!c source on your non B&O TV.
DVD options
Enter one of these codes within 10 seconds, to select the source on the non B&O TV that will be selected
with the VMEM or VTAPE button.
No new source selected.
The AV1 socket on the TV is opened.
The AV2 socket on the TV is opened.
The DTV tuner on the TV is opened.
The Component 1 socket is shifted to.
The Component 1 socket is accessed.
The HDMI 1 socket is accessed.
The HDMI 2 socket is accessed.
S-VHS 1
USB Wiselink
As the BOSSCOM controller is able to operate many di"erent TV models, there might be some sources in the
table, that is not available on your TV. The only way to #nd out if your TV accepts these codes, is testing
each of the options.
If a source is not access able using these options, sources must be accessed the same way as using the TVs
original remote control. Using the source button.
Download from Www.Somanuals.com. All Manuals Search And Download.
The Beo4 VAUX button option
On your BOSSCOM modi!ed Beo4 remote control, the VAUX button in the List -
menu can be programmed, to open a speci!c source on your non B&O TV.
VAUX options
Enter one of these codes within 10 seconds, to select the source on the non B&O TV that will be selected
with the VMEM or VTAPE button.
No new source selected.
The AV1 socket on the TV is opened.
The AV2 socket on the TV is opened.
The DTV tuner on the TV is opened.
The Component 1 socket is shifted to.
The Component 1 socket is accessed.
The HDMI 1 socket is accessed.
The HDMI 2 socket is accessed.
S-VHS 1
USB Wiselink
As the BOSSCOM controller is able to operate many di"erent TV models, there might be some sources in the
table, that is not available on your TV. The only way to #nd out if your TV accepts these codes, is testing
each of the options.
If a source is not access able using these options, sources must be accessed the same way as using the TVs
original remote control. Using the source button.
Download from Www.Somanuals.com. All Manuals Search And Download.
|
RCA MP3 Player Accessories 200KITNA1800 User Guide
Riccar Vacuum Cleaner RC 1500S User Guide
Samsung Air Conditioner 3759 User Guide
Samsung Computer Monitor 151BM User Guide
Samsung Digital Camera AD68 04709A User Guide
Samsung Flat Panel Television LA46A850S1R User Guide
Scag Power Equipment Lawn Mower GC STWC 61V User Guide
Seagate Switch ST34501FC User Guide
Seiko Watch 7T32 User Guide
Senco Nail Gun Nail Gun User Guide