* Some of the contents in this manual may differ from your
phone, depending on the software installed or your
service provider.
DUAL BAND
GPRS TELEPHONE
SGH-X100A
ELECTRONICS
Printed in Korea
World Wide Web
Code No.: GH68-04738A
English. 1/2004. Rev. 1.0
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Important Safety Precautions ...................... 7
Unpacking.................................................... 9
Your Phone ................................................ 10
Phone Layout.................................................... 10
Display............................................................. 13
Backlight.......................................................... 16
Service Light..................................................... 16
Getting Started .......................................... 17
Inserting/Removing the SIM Card ........................ 17
Installing/Removing/Charging the Battery............. 18
Switching the Phone On or Off............................. 22
Selecting Functions and Options .......................... 23
Locking or Unlocking the Keypad ......................... 25
Call Functions ............................................ 26
Making a Call .................................................... 26
Ending a Call..................................................... 29
Answering a Call................................................ 29
Rejecting a Call ................................................. 29
Adjusting the Volume......................................... 29
Accessing Options During a Call........................... 30
Using the Ear-microphone................................... 36
Entering Text ............................................. 37
Changing the Text Input Mode ............................ 38
Using Chinese Pinyin Mode.................................. 39
Using Chinese Stroke Modes ............................... 41
Using Quick English Mode ................................... 43
Using English Mode............................................ 45
Using Number Mode........................................... 47
Using Symbolic Mode ......................................... 47
Using the Menus......................................... 48
Accessing a Menu Function ................................. 48
List of Menu Functions........................................ 49
3
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Contents
Phonebook Menu........................................ 55
Phone Settings......................................... 100
Find Name (Phonebook 1.1)................................. 55
Add Entry (Phonebook 1.2) .................................. 58
Speed List (Phonebook 1.3) ................................. 59
Copy All to Phone (Phonebook 1.4) ....................... 61
Delete All (Phonebook 1.5)................................... 62
Own Number (Phonebook 2.1).............................. 63
Group Setting (Phonebook 2.2)............................. 64
Memory Status (Phonebook 2.3)........................... 65
Service Directory (Phonebook 3.1)........................ 65
Greeting Message (Menu 4.1) ............................. 100
Display (Menu 4.2)............................................ 101
Auto Keylock (Menu 4.3) .................................... 103
Language (Menu 4.4)......................................... 103
Security (Menu 4.5)........................................... 104
Auto Redial (Menu 4.6) ...................................... 107
Anykey Answer (Menu 4.7)................................. 107
Auto Answer (Menu 4.8)..................................... 108
Fax Mode (Menu 4.9)......................................... 108
Service Light (Menu 4.10) .................................. 109
Reset Settings (Menu 4.11) ................................ 109
Messages ................................................... 66
Short Message (Menu 1.1)................................... 66
Multimedia Message (Menu 1.2) ........................... 73
Voice Mail (Menu 1.3) ......................................... 84
Preset Messages (Menu 1.4) ................................ 85
Broadcast (Menu 1.5) ......................................... 85
Settings (Menu 1.6)............................................ 87
Memory Status (Menu 1.7) .................................. 90
Organiser................................................. 110
New Memo (Menu 5.1)....................................... 110
Calendar (Menu 5.2).......................................... 112
To Do List (Menu 5.3) ........................................ 115
Clock (Menu 5.4)............................................... 116
Alarm (Menu 5.5).............................................. 118
Calculator (Menu 5.6) ........................................ 120
Conversion (Menu 5.7)....................................... 121
Timer (Menu 5.8) .............................................. 122
Stopwatch (Menu 5.9)........................................ 123
Call Records ............................................... 91
Missed Calls (Menu 2.1) ...................................... 91
Received Calls (Menu 2.2) ................................... 91
Dialled Calls (Menu 2.3) ...................................... 92
Delete All (Menu 2.4).......................................... 92
Call Time (Menu 2.5) .......................................... 93
Call Costs (Menu 2.6) ......................................... 94
Network Services..................................... 124
Call Diverting (Menu 6.1) ................................... 124
Call Barring (Menu 6.2)...................................... 126
Call Waiting (Menu 6.3)...................................... 129
Network Selection (Menu 6.4)............................. 130
Caller ID (Menu 6.5).......................................... 131
Active Line (Menu 6.6)....................................... 131
Sound Settings........................................... 95
Incoming Calls (Menu 3.1)................................... 95
Messages (Menu 3.2).......................................... 96
Power On/Off (Menu 3.3) .................................... 97
Connection Tone (Menu 3.4)................................ 97
Key Tone (Menu 3.5) .......................................... 98
Minute Minder (Menu 3.6) ................................... 98
Quiet Mode (Menu 3.7) ....................................... 99
Fun Box.................................................... 132
WWW Services (Menu 7.1) ................................. 132
Media Box (Menu 7.2)........................................ 138
JAVA World (Menu 7.3) ...................................... 140
5
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Using ALS (Alternate Line Service) .......... 145
Solving Problems ..................................... 147
Access Codes ........................................... 150
Phone Password ............................................... 150
PIN................................................................. 150
PIN2............................................................... 151
PUK................................................................ 151
PUK2 .............................................................. 152
Call Barring Password........................................ 152
Health and Safety Information................. 153
Exposure to Radio-Frequency Energy
(SAR Information) ............................................ 153
Precautions When Using Batteries....................... 154
Road Safety..................................................... 156
Operating Environment ..................................... 158
Electronic Devices............................................. 158
Potentially Explosive Atmospheres ...................... 160
Emergency Calls............................................... 161
Other Important Safety Information.................... 162
Care and Maintenance....................................... 162
Glossary................................................... 164
Quick Reference Card............................... 167
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety
Precautions
Read these guidelines before using your wireless
phone. Failure to comply with them may be
dangerous or illegal.
Road Safety at All Times
Do not use a hand-held phone while driving; park
the vehicle first.
Switching Off When Refuelling
Do not use the phone at a refuelling point (service
station) or near fuels or chemicals.
Switching Off in Aircraft
Wireless phones can cause interference. Using them
in aircraft is both illegal and dangerous.
Switching Off in Hospitals
Switch off your phone near medical equipment.
Follow any regulations or rules in force.
Interference
All wireless phones may be subject to interference,
which could affect their performance.
Special Regulations
Meet any special regulations in force in any area
and always switch off your phone whenever it is
forbidden to use it, or when it may cause
interference or danger (in a hospital for example).
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Precautions
Sensible Use
Unpacking
Your package contains the following items:
Use only in the normal position (held to the ear).
Avoid unnecessary contact with the antenna when
the phone is switched on,, especially the phone is in
service.
Emergency Call
Ensure the phone is switched on and in service. Key
in the emergency number for your present location,
Phone
Travel Adapter
then press the
key. If certain feature are in use,
you may need to deactivate those features before
you can make an emergency call. Give all the
necessary information as accurately as possible. Do
not end the call until given permission to do so by
the person on the other end of the phone.
Manual
Batteries
Water Resistance
Your phone is not water-resistant. Keep it dry.
Note: The items supplied with your phone may be
Accessories and Batteries
different depending on the country.
Use only Samsung-approved accessories and
batteries.
In addition, you can obtain the following
accessories for your phone from your local
Samsung dealer:
Qualified Service
Only qualified service personnel should install or
repair your phone. Failure to do so may invalidate
the warranty.
• Battery charger
• Simple hands-free kit
• Cigarette lighter adapter
• Data kit
For more detailed safety information, see “Health
and Safety Information” on page 153.
8
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Your Phone
Your Phone
Key(s)
Description
Perform the functions indicated by the
text above them, on the bottom line of
the display.
Phone Layout
(soft keys)
The following illustrations show the main elements
of your phone.
In Menu mode, scroll through the
menu options.
In Idle mode, the Left key enters the
New SMS message writing screen,
the Right key enters the Incoming
call’s melody setting menu and the
Up key enters the Calendar menu.
The Down key enters the Java world
menu.
Service light
Earpiece
Ear-microphone
Display
In Idle mode, launches the WAP
(Wireless Application Protocol) browser
directly.
jack
Volume keys
Makes or answers a call.
Navigation keys
(Up/Down/Left/
Right)
In Idle mode, accesses the call log list.
In Menu mode, selects a menu
function or stores information that you
have entered, such as a name in the
phone or SIM memory.
Soft key (left)
Browser key
Dial/Menu
confirmation key
Soft key (right)
Power On/Off /
Menu exit key
Cancel/Back/
Correction key
Deletes characters from the display.
When pressed and held in Idle mode,
quickly accesses the New memo
screen.
Alphanumeric
keys
In Menu mode, returns to previous
menu.
Special
function keys
Microphone
Ends a call.
When pressed and held, switches the
phone on and off.
Charger Connector
In Menu mode, cancels your input and
returns to Idle mode.
10
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Your Phone
Key(s)
Your Phone
Display
Description (continued)
When pressed and held in Idle mode,
quickly accesses your voice mail
server.
Display Layout
The display has three areas:
Enters numbers, letters and some
special characters.
Icons
Used for various purposes in different
functions.
Text and
graphic area
When pressed and held while entering
a phone number, the
pause.
key enters a
When pressed and held in Idle mode,
Soft keys
indications
Menu
Phonebook
the
key enters or exits the Quiet
Mode.
When pressed and held in Idle mode,
Area
Description
the
key enters or exits the Key Lock
Mode.
First line
Displays various icons. See
page 14.
(on the left side of the phone)
During a call, adjusts the earpiece
volume.
In Idle mode, adjusts the key tone
volume.
Middle lines
Display messages, instructions
and any information that you
enter, such as number to be
dialled.
When held down at an incoming call,
silence the ring tone.
Last line
Shows the functions currently
assigned to the two soft keys.
12
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Your Phone
Your Phone
Icons
Icon Description
Icon Description
Appears when you are connected to the
GPRS network.
Shows the received signal strength. The
more the number of bars, the stronger
the signal.
Appears when you are at the home zone.
May be shown only if your service provider
supports this)
(
Appears when a call is in progress. When
your SIM card supports ALS (Alternate
Line Service), this icon may appears with
the number 1,2, or both.
Appears when your are at the office zone.
(May be shown only if your service provider
supports this)
For example
,
,
.
Appears when the keys are locked.
Appears when you are out of a service
area. When it displays, you cannot make
or receive calls.
Appears when you set the alert type for
incoming calls to Vibration or Vibration
then melody. For further details, see
page 96.
Appears when you have new or
unchecked voice messages. When your
SIM card supports ALS (Alternate Line
Service), this icon may appears like
Appears when the Quiet mode is active.
,
,
.
Shows the level of your battery. The more
bars you see, the more power you have
left.
Appears when you have new or unread
messages.
Appears when you have new or
unchecked multimedia messages.
Dimming Mode
If no key is pressed for given period of time which
you can set in the Phone setting menu option
(Menu 4.2.3), the backlight turns to dim to save
the power. Press any key to awake it from Dimming
mode.
Appears when you are retrieving a
multimedia message.
Appears when you set the alarm(s) to ring
at a specified time.
Appears when the Call diverting feature is
activated.When you SIM card supports
ALS (Alternate Line Service), this icon
may appears with the number 1, 2, or
Clock Mode
If no key is pressed for a minute in a Dimming
mode then it switches to the digital clock. Press any
key to awake the display from Clock mode.
both. For example
,
,
.
14
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Your Phone
Getting Started
Backlight
The display and the keypad are illuminated by a
backlight. When you press any key the backlight
illuminates. It turns off if no key is pressed within a
given period of time, depending on the Backlight
menu option. See page 102 for further details.
Inserting/Removing the SIM Card
When you subscribe to a cellular network, you are
provided with a SIM card loaded with your
subscription details, such as your PIN, any optional
services available and so on.
Note: The backlight remains on at all times when the
phone is connected to an optional car kit.
• Keep all miniature SIM cards out of the reach of
small children.
• The SIM card and its data can be easily damaged
by scratches or bending, so be careful when
handling, inserting or removing the card.
Service Light
The service light’s activity depends on the Service
light menu option. See page page 109. The colour
of service light is also selectable from the option.
• When installing the SIM card, always make sure
that the phone is switched off before you remove
the battery.
The service light will also flash, when you set the
SMS message, MMS message and incoming call
alert to Light only.
Inserting the SIM Card
1. If necessary, remove the battery by referring to
page 19.
2. Insert and slide the SIM card under the two
tabs, ensuring that the notched corner is top left
and the gold contacts of the card face into the
phone.
16
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Getting Started
2. Slide the battery up towards the catch until it
locks into place.
Removing the SIM Card
To remove the SIM card, slide the card out of the
holder, as shown.
Removing the Battery
1. Switch off the phone by pressing and holding the
key.
Installing/Removing/Charging the
Battery
2. Press and hold down the catch above the battery
on the back of the phone and slide the battery
away.
Your phone is powered by a rechargeable Li-ion
battery. Use only approved batteries and chargers.
Ask your local Samsung dealer for further details.
Note: You must fully charge the battery before using
your phone for the first time. A discharged
standard battery is fully recharged in
approximately 120 minutes.
Installing the Battery
1. Place the battery back on the phone. Make sure
each side tab of the battery placed into
corresponding slot on the phone.
18
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Getting Started
3. When charging is finished, disconnect the
Charging the Battery by Using the Travel
Adapter
adapter from the power outlet and from the
phone by pressing the grey tabs on both sides of
the connector and pulling the connector out.
Note: The phone can be used while the battery is
being charged, but this causes the battery to
charge more slowly.
1. Plug the connector of the travel adapter into the
jack at the bottom of the phone. Check that the
arrow on the connector is facing towards the
front of the phone.
➀
➀
➁
Low Battery Indicator
When the battery is weak and only a few minutes of
talk time remain, the battery sensor informs you in
the following ways: an empty battery icon flashes
(
), you hear a warning tone and a message
2. Plug the adapter into a standard AC wall outlet.
repeats at regular intervals on the display.
While charging, the battery icon at the top right-
hand corner of the display repeatedly fills to
show that the battery is charging.
When the battery becomes too weak for the phone
to operate, it switches off automatically.
20
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Getting Started
Switching the Phone On or Off
Selecting Functions and Options
To switch the phone on:
Your phone offers a set of functions that allow you
to customise your phone. These functions are
arranged in menus and sub-menus, accessed via
1. Hold down the
on.
key until the phone switches
the two soft keys marked
and
. Each menu
and sub-menu allows you to view and alter the
settings of a particular function.
2. If the phone asks for a PIN, enter the PIN and
press the Ok soft key. For further details, see
page 150.
The roles of the soft keys vary according to the
current context; the labels or icons on the bottom
line of the display and just above the soft keys
indicate their current roles.
The phone searches for your network and the
current date and time appear on the display.
After finding, you can make or receive a call.
Example:
Service Provider
Web 17 Sep
12:53
Service Provider
Wed 17 Sep
12:53
Menu
Phonebook
Menu
Phonebook
Note: To change the language, use the
Language menu option (Menu 4.4).
For further details, see page 103.
To switch the phone off:
Press the left soft
key to access the
menu functions.
Press the right soft
key to access the
Phonebook feature.
Hold down the
key until the power-off
animation displays.
To view various functions/options available or select
the one is required:
22
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Getting Started
1. Press the appropriate soft key.
Locking or Unlocking the Keypad
2. To
select the:
Press the
Select soft key.
You can lock the keypad to avoid pressing keys by
mistake.
To lock the keypad manually, press and hold
in Idle mode until “Keypad locked” appears on the
display.
key
• function displayed
• option highlighted
view the next function or Down key.
highlight the next option
on a list
To lock the keypad automatically, use the Auto key
lock option (Menu 4.3). See page 103
.
In the Key Lock Mode, you can dial emergency calls
and answer incoming call using keypad. When you
end the call, your phone returns to the Key Lock
Mode after given period time.
move back to the
previous function or
option on a list
Up key.
move back up one level
in the structure
(or Back) soft key
or C key.
To exit the Key Lock Mode, press the Unlock soft
key and then press the
appears.
key. “Keypad unlocked”
return to Idle mode
key.
In some functions, you may be asked for a
password or PIN. Enter the required code and press
the Ok soft key.
24
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Call Functions
Call Functions
Making an International Call
1. Press and hold the 0 key for the international
Making a Call
prefix. The + character appears.
2. Enter the country code, area code and phone
number and press the
key.
Using the Number Keypad
When the idle screen is displayed, enter the area
Making a Call from Phonebook
code and phone number, and press the
key.
You can store the names and phone numbers called
regularly in the SIM card and phone’s memory,
which are jointly called the Phonebook. You then do
not need to remember all your numbers; simply
select the required name to recall the associated
number.
Note: If you have set the Auto redial option (Menu
4.6) to On, the number is redialled
automatically up to ten times if the person you
called does not answer or the line is busy. For
further details, see page 107.
For further details about the Phonebook feature,
see page 55.
Correcting the Number
To clear
Press the
Using the Call Logs
the last digit
displayed
C key.
The phone stores up to 20 calls dialled, received or
missed chronologically. The last call is saved in the
first position. If the same number occurs more than
once, only the latest occurrence is saved.
any other digit in
the number
Left or Right key until the
cursor (|) is immediately to
the right of the digit to be
cleared and press the C key.
You can also insert a missing
digit simply by pressing the
appropriate key.
To recall any of these numbers:
1. Press the
log list.
key in Idle mode to access the Call
the whole digits
display
C key and hold it down for
more than one second.
2. Use the Up and Down keys to scroll through the
list until the number you want is highlighted.
The call logs are listed with the following icons:
•
•
•
: Dialled calls
: Received calls
: Missed calls
26
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Call Functions
Call Functions
3. To dial the number, press the
key.
Ending a Call
To view each call record, see “Call Records” on
page 91.
When you want to finish your call, briefly press the
key.
Viewing Missed Calls
Answering a Call
If you have a subscription that includes the Caller
Line Identification (CLI) feature and you are unable
to answer a call for any reason, you can find out
who was calling you so that you can call the person
back.
When somebody calls you, the phone rings and
displays the incoming call animation.
If the caller can be identified, the caller’s phone
number, or name if stored in your Phonebook, is
displayed.
The number of missed calls is displayed on the idle
screen immediately after a call was missed.
To view the missed calls immediately:
To answer a call, press the
key.
key or Accept soft
1. Press the View soft key.
Note: You can answer a call while using the
Phonebook or menu features. The current
operation stops.
The list of the missed calls displays.
2. If necessary, scroll to the number you want by
pressing the Up or Down key.
3. To dial the number, press the
key.
Rejecting a Call
To use the missed call options, see “Missed Calls”
on page 91.
To reject an incoming call, press the
key or
Reject soft key.
Note: To clear the missed call notification on the
display, press the
key.
Adjusting the Volume
Speed-Dialling from Phonebook
Once you have stored numbers in the Phonebook,
you can dial a number simply by pressing one or
two keys. For further details, see page 59.
During a call, if you wish to adjust the earpiece
volume, press the up or down volume key on the
left side of the phone.
When you hear a sound, such as ringtone, you can
also adjust the earpiece volume. But it is not fixed.
28
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Call Functions
Call Functions
To communicate with answering machines or
computerised telephone systems, the Send keys
Accessing Options During a Call
option must be selected.
Your phone provides a number of control functions
that you can use during a call.
Putting a Call on Hold
Switching the Microphone Off (Mute)
You can place the current call on hold whenever you
want. You can make another call while you have a
call in progress if this service is supported by the
network. Of these two calls, one is active and the
other is on hold and you can switch between the
calls.
You can temporarily switch your phone’s
microphone off so that the other person cannot
hear you.
Example: You may wish to say something to
another person in the room but do not
want the calling person to hear you.
To place a call on hold, simply press the Hold soft
key. You can reactivate the call whenever you want
by pressing the Retrieve soft key.
1. Press the Options soft key.
To make a call while you have a call in progress:
2. When Mute highlights, press the Select soft
key.
1. Enter the phone number that you want to dial or
look it up in Phonebook.
The Mute icon (
) appears on the bottom line
of the display and your correspondent can no
longer hear you.
2. Press the
key to dial the second call.
The first call is automatically put on hold.
To switch the microphone back on:
Or alternatively:
1. Press the Options soft key.
1. Put the current call on hold by pressing the Hold
soft key.
2. When Unmute highlights, press the Select soft
key.
2. Make the second call in the normal way.
The Mute icon disappears and your
correspondent can hear you.
To switch between the two calls, simply press the
Swap soft key.
The current call is placed on hold and the call on
hold is reactivated so that you can continue
conversing with the other person.
Muting/Sending Key Tones
You can turn the key tones off or on during a call.
When the Mute keys option is selected, your phone
does not transmit the key tones. It allows you to
press keys without hearing annoying key tones
during a call.
To end the call on hold, press the Options soft key
and select the End held call option.
When you want to finish, end each call normally by
pressing the
key.
30
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Call Functions
Call Functions
Answering a Second Call
Searching for a Number in Phonebook
You can answer an incoming call while you have a
call in progress, if this service is supported by the
network and you have activated the Call waiting
option (see page 129). You will be notified of an
incoming call by a call waiting tone.
You can search for a number in your Phonebook
during a call.
1. Press the Options soft key.
2. If necessary, press the Up or Down key to
highlight the Phonebook option. Press the
Select soft key.
To answer a call while you have another call in
progress:
1. Press the
key to answer the incoming call.
3. Select the Find name option and press the
The first call is automatically put on hold.
Select soft key.
The Phonebook entries are listed.
2. To switch between the two calls, press the Swap
soft key.
Enter the first few letters of the name that you
want to find.The Phonebook entries are listed
starting with the first entry matching your input.
3. To end the call on hold, press the Options soft
key and select the End held call option.
Note: You can also scroll through the Phonebook
To end the current call, press the
The call on hold is automatically reconnected to
you.
key.
from the beginning, by pressing the Up or
Down key
.
4. To view the highlighted entry, press the Ok soft
key.
Transferring a Call
For further details about the Phonebook feature,
see page 55.
You can transfer the current call to the call on hold
if this service is supported by the network, so that
the callers can talk to each other. You are
disconnected from both of them.
Using the Message Service
1. During a call, answer or make a call in the
You can read or write a new message during a call.
1. Press the Options soft key.
normal way, and press the Options soft key.
2. Press the Up or Down key to select the Transfer
option and press the Select soft key.
2. Press the Up or Down key to highlight the
Message option. Press the Select soft key.
The two people are connected to each other.
3. To read a received message, select the Inbox
option, and then scroll to the message that you
want to read.
32
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Call Functions
Call Functions
To write a new message, select the New
2. Answer or make a call in the normal way.
message option.
3. You can reactivate the call on hold by pressing
the Retrieve soft key.
4. Press the Select soft key.
To end the multi-party call on hold, press the
Options soft key and select the End held
multiparty option.
For further details about the SMS feature, see
page 66.
To answer an incoming call when you have a multi-
party call in progress and a call on hold:
Making a Multi-party Call
A multi-party call feature is a network service that
allows up to six people to take part simultaneously
in a multi-party or conference call. For more
information, contact your service provider.
1. Press the Accept soft key.
2. Select the End held option to end the call on
hold.
Setting up the Multi-party Call
Or, select the End current option to end the call
in progress.
1. Call the first participant in the normal way.
3. Answer the new call by pressing the
key.
2. Call the second participant in the normal way.
The first call is automatically put on hold.
Having a Private Conversation With One
Participant
3. To join the first participant to the multi-party
call, press the Options soft key and select the
Join option. Press the Select soft key.
1. Press the Options soft key and select the Split
option. Press the Select soft key.
4. To add a new person to the multi-party call, call
the person in the normal way. Then press the
Options soft key and select the Join option.
Press the Select soft key.
2. Press the Up or Down key to highlight a
participant and press the Select soft key.
Now you can talk privately with that person. The
other participants can continue to converse with
each other.
You can add incoming callers by answering the call
and selecting the Join option. Repeat as needed.
3. To return to the multi-party call, press the
Options soft key and select the Join option.
Having a Second Call During a Multi-party Call
4. Press the Select soft key.
To answer or make a call when you have the multi-
party call:
All of the multi-party call participants can now
hear each other.
1. To place the multi-party call on hold, press the
Hold soft key.
34
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Call Functions
Entering Text
Removing One Participant
The phone allows you to enter characters for
messages and names in Chinese and English. To
enter Chinese text, the phone provides several
widely used pronunciation based (Pinyin) and
character shape based (Stroke) input methods to
meet the preferences of different users, allowing for
greater convenience and ease of use
1. Press the Options soft key and select the
Remove option.
2. Press the Up or Down key to highlight a
participant and press the Select soft key.
The call ends with that participant, but you can
continue to talk with the other participants.
You can also enter any combination of Chinese
characters, alphabets, numbers, and special
symbols including punctuation marks
3. End the multi-party call by pressing the
key.
• Pinyin mode
• Chinese Simplified Stroke mode
Using the Ear-microphone
*
• Quick English mode (T9 mode)
With the ear-microphone, you can make or answer
a call without holding the phone.
• English mode
• Malay mode
When you connect the ear-microphone to the jack
at the left side of the phone, the button on the ear-
microphone works as listed below:
• Chinese Traditional Stroke mode
• Number mode
• Symbolic mode
To
Press
• Add word mode
redial the last call
the button twice in Idle
mode.
Directions for using each of the text input modes
appears later in this section.
answer a call
end a call
and hold the button when
you receive the call.
and hold the button when
you have finished the call.
*
is a registered Trademark of Tegic Communications,
Inc. and is licensed under U.S. Patent 5,818,437/
5,953,541/6,011,554.
36
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Entering Text
Entering Text
Changing the Text Input Mode
Using Chinese Pinyin Mode
When you are in a field that allows characters to be
entered, you will see the text input mode indicator
at the bottom of the display.
Pinyin is a system to mark Chinese pronunciation in
Latin alphabets. With the pinyin input method, you
can enter Chinese characters by entering the pinyin
string from the phone keypad and the phone
Example: Entering a name in Phonebook
automatically presents the matching alternatives.
This mode allows you to enter Pinyin characters
with only one key press per letter.
Enter name
Typing Characters in Pinyin Mode
1. Press keys corresponding to the phonetic
spelling, referring to the Roman letters printed
on the keys. Notice that the choices in the
Character Selection Map change.
Text input mode
9
Ok
PY
indicator: Chinese
Pinyin mode
Example: Typing “
” in Pinyin mode
To change to another text input mode:
1. Press the right soft key indicating the current
text input mode.
Enter name
Text Area
2. Scroll to the mode you want to use by pressing
the Up or Down key.
Key Stroke Area: press
the 5 and 4 keys to
You can use the Add word option to add new
enter “li.”
words into t9 dictionary. see page 43.
Character Selection Map
Ok
PY
Note: If you want to exit the menu without
changing the mode, press the
key.
soft key or
2. If there are more than one pinyin spelling
corresponding to your keypress, press the Left
or Right key to select the spelling you want.
3. Press the Select soft key to confirm the
highlight text input mode.
3. If you cannot find the character you want from
the display, press the Up or Down key to scroll
through choices in the Character Selection map.
Note: If you want to exit the menu without changing
to a new mode, press the right soft key.
4. The selected text input mode indicator appears
at the bottom of the display.
38
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Entering Text
Entering Text
Clearing Strokes and Characters
When the character you are typing appears in
the Character Selection Map, you may select it.
without completing the Pinyin spelling or
entering the tone for the character.
Press the C key or more times to remove strokes to
the left. Once the Pinyin Area is empty, pressing the
C key removes characters from the Text Area.
4. To select a character, press the 1 key to activate
the Character Selection Map. A number, 1 to 5,
is added to the beginning of a corresponding
character. With the Character Selection Map
being activated, a normal press on the 1 to 5
key selects the corresponding character.
Using Chinese Stroke Modes
These modes allow you to enter individual Chinese
strokes, in written order; from top to bottom, and
from left to right. Your phone provides Chinese
Simplified Stroke mode and Chinese Simplified
Stroke mode.
Enter name
The two modes work similarly, but the characters
that appear on the display.
Even though there are many different strokes used
to create Chinese characters, the strokes are
classified into 5 basic categories; heng, shu, pie,
dian and zhe. The basic strokes are printed on the
keypad, on the 1 to 5 keys.
Press the
to enter “
3
key
.”
Ok
PY
Notes:
• To insert a space when entering a text, press the
key when the cursor blinks in the Text Area.
To enter a stroke, press the key printed with the
printed with the stroke that most closely represents
the exact stroke you want.
•
To remove the activate character in the Character
Selection Map, press the key.
C
The table shows the stroke/key relationship:
Scrolling
To move the cursor left or right through your text
message, press the Left or Right key.
Inserting a Space
Insert a space between the characters, press the
key in the Text Area.
40
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Entering Text
Entering Text
Typing Strokes and Characters in Stroke
Mode
Selection map correspond to keys 7 to 0 on the
keypad. To select a character from the Character
Selection Map and add it to your message, press
the corresponding key 7 to 0.
1. To type a character, press keys corresponding to
its component strokes. Press keys on the
handset in the order that you would write the
strokes, using one press per each stroke.
Scrolling
Example: Typing “
” in Chines Traditional
To move the cursor left or right through your text
message, press the Left or Right key.
Stroke mode
Clearing Strokes and Characters
Press the C key one or more times to remove
strokes to the left. Once the Stroke Area is empty,
pressing the C key removes characters from the
Text Area.
Press the 5 key to enter
“
to enter “
,”and the.n”the 3 key
9
Using Quick English Mode
2. The phone displays your strokes in the Key
Stroke Area and offers character choices in the
Character Selection Map. As you enter strokes,
notice that the choices in the Character
Selection Map change.
To type a word, press keys corresponding to the
letters you need. Remember the following as you
are typing:
1. Start entering the word by pressing keys 1 to 0.
To scroll through choices in the Character
Selection Map, press the Up or Down key.
Press each key only once for each letter.
Example: To enter “hello” in Quick English
mode, press the 4, 3, 5, 5, and 6
keys.
Note: If you are uncertain of the order of one or
more strokes, press the
6
key in place of
each questionable stroke. Continue entering
strokes until the character is displayed in
the Character Selection Map or until you
have finished the character.
Thewordyouaretypingappearsonthedisplay.
It may change with each key that you press.
2. Enter the whole word before editing or deleting
any keystrokes.
3. When the character you are typing appears in
the Character Selection Map, you may select it
without finishing the stroke sequence for the
character. Characters displayed in the Character
3. If the word is correct, start entering the next
word. Otherwise, press the 0 key repeatedly to
42
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Entering Text
Entering Text
display alternative word choices for the keys
that you have pressed.
Changing the Case
To shift the case of the next letter(s) that you type,
Example: Both “of” and “me” have the sequence
of 6 and 3. The phone displays the
press the key. There are three cases; Lower
Case, Initial Capital and Capital Lock.
most commonly used choice first.
Scrolling
4. Insert a space between words by pressing the
key.
• To move the cursor to the left or right within the
text, press the Left or Right key.
If Spell appears above the left soft key while you
are entering text, the word does not exist in the T9
dictionary. To type words not found in Quick English
mode, change the text input mode to English mode,
or proceed as follows:
• To scroll through alternative word choices for the
keys you have entered, press the 0 key.
Clearing Letters and Words
Press the C key one or more times to clear letters to
the left. Press and hold the key to clear the display.
1. Press the Spell soft key, or press the right soft
key and select the Add word option.
2. Enter the word you want to add using English
mode (see page 45) and press the Ok soft key.
Using English Mode
The word is saved in the T9 dictionary and
inserted in the input field.
When typing in English mode, press the key labelled
with the required letter:
- Once for the first letter
- Twice for the second letter
- And so on
3. Continue entering other words in Quick English
mode.
Smart Punctuation
Example: To display the letter “C”, quickly press the
2 key three times. To display the letter
“K”, press the 5 key twice. This method is
called Multi-tap typing.
To enter periods, hyphens or apostrophes, press the
1 key. T9 mode applies rules of grammar to insert
the correct punctuation.
Note: The cursor moves to the right when you press a
different key. When entering the same letter
twice or a different letter on the same key, just
wait a few seconds for the cursor to move to
the right automatically, and then enter the next
letter.
Example: The 1 key is used twice to display two
punctuation marks.
l
e
t
‘
s
e
a
t
.
44
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Entering Text
Entering Text
Refer to the table below for more information about
the characters available:
Using Number Mode
Number mode enables you to enter numbers in
your text. Press the keys corresponding to the
digits you want to enter.
Characters in the Order Displayed
Key
Upper case
Lower case
Using Symbolic Mode
Symbolic mode enables you to enter symbols in
your text.
To
Press the
display more
symbols
Up or Down key.
enter a symbol
corresponding number key.
Changing the Case
To shift the case of the next letter(s) that you type,
return to the
previous text input
mode
Ok or
soft key.
press the key. There are three cases; Lower
Case, Initial Capital and Capital Lock.
Inserting a Space
To insert a space between the words, press the
key.
Scrolling
To move the cursor to the left or right within the
text, press the Left or Right key.
Clearing Letters and Words
Press the C key one or more times to clear letters to
the left. Press and hold the key to clear the display.
46
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Menus
Using the Menus
The phone offers a range of functions that allow you
to tailor the phone to your needs. These functions
are arranged in menus and sub-menus.
You can also access the menus and sub-menus by
entering the corresponding menu number.
Example: To access the Voice mail menu option,
press the Menu soft key, 1, 3 in Idle
mode.
Accessing a Menu Function
List of Menu Functions
The menus and sub-menus can be accessed by
pressing the Menu soft key or Phonebook soft key
in Idle mode, then scrolling with the navigation
keys.
Various menus let you check or change your phone
settings. The following list shows the menu
structure.
1. In Idle mode, press the Menu to access the
main menu or press the Phonebook soft key to
access Phonebook menu.
The numbers assigned to each menu option may
not match the menu number on the phone. It
depends on the services supported by your SIM
card.
2. Scroll through the menus using the Left or Right
key.
Phonebook Menu
3. Find the sub-menu that you wish to use by
scrolling with the Up or Down key.
1. Phonebook (see page 55)
1.1 Find name
1.2 Add entry
1.3 Speed list
1.4 Copy all to phone
1.5 Delete all
4. Press the Select soft key to access the sub-
menu.
If the menu that you have selected contains
further sub-menus, repeat steps 3 and 4.
5. Scroll to the option you want to choose with the
Up or Down key.
2. Management (see page 63)
2.1 Own number
2.2 Group setting
2.3 Memory status
6. Press the Select soft key to choose the setting.
Note: You can return to the previous menu level by
pressing the
soft key.
3. Services (see page 65)
3.1 Service directory
49
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Menus
Using the Menus
Main Menu
2. Call records (see page 91)
2.1 Missed calls
2.2 Received calls
2.3 Dialled calls
2.4 Delete all
1. Messages (see page 66)
1.1 Short message
1.1.1 Inbox
2.5 Call time
1.1.2 New message
2.5.1 Last call time
2.5.2 Total sent
2.5.3 Total received
2.5.4 Reset timers
1.1.3 Outbox
1.1.4 Delete all
1.2 Multimedia message
1.2.1 Inbox
*
2.6 Call costs
1.2.2 New message
1.2.3 Outbox
1.2.4 Draft
2.6.1 Last call cost
2.6.2 Total cost
2.6.3 Max cost
2.6.4 Reset counters
2.6.5 Set max cost
2.6.6 Price/Unit
1.2.5 My folder
1.2.6 Delete all
1.3 Voice mail
1.3.1 Connect to voice mail
1.3.2 Voice server number
1.4 Preset messages
1.5 Broadcast
1.5.1 Read
3. Sound settings (see page 95)
3.1 Incoming calls
3.1.1 Default melodies
3.1.2 My sounds
3.1.3 Ring volume
3.1.4 Alert type
1.5.2 Receive
1.5.3 Channel
1.5.4 Language
1.6 Settings
3.2 Messages
1.6.1 Short message
1.6.2 Multimedia message
1.7 Memory status
3.2.1 Short message
3.2.2 Multimedia message
3.3 Power on/off
3.4 Connection tone
3.5 Key tone
1.7.1 Short massage
1.7.2 Multimedia message
3.6 Minute minder
3.7 Quiet mode
* Shown only if supported by your SIM card.
51
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Menus
Using the Menus
4. Phone settings (see page 100)
5. Organiser (see page 110)
4.1 Greeting message
4.2 Display
5.1 New memo
5.2 Calendar
5.3 To do list
5.4 Clock
4.2.1 Wallpaper
4.2.2 Skin
4.2.3 Backlight
4.2.4 LCD contrast
4.3 Auto keylock
4.4 Language
5.4.1 Set time
5.4.2 Set date
5.4.3 Set world time
5.4.4 Set format
5.5 Alarm
4.5 Security
4.5.1 PIN check
4.5.2 Change PIN
4.5.3 Phone lock
4.5.4 Change password
4.5.5 Privacy
5.6 Calculator
5.7 Conversion
5.8 Timer
5.9 Stopwatch
4.5.6 SIM lock
4.5.7 FDN mode
*
6. Network services (see page 124)
4.5.8 Change PIN2*
4.6 Auto redial
4.7 Anykey answer
4.8 Auto answer
6.1 Call diverting
6.1.1 Divert always
6.1.2 Busy
6.1.3 No reply
4.9 Fax mode
6.1.4 Unreachable
6.1.5 Cancel all
6.2 Call barring
6.2.1 All outgoing
6.2.2 International
4.10 Service light
4.11 Reset settings
4.11.1 Sound settings
4.11.2 Phone settings
4.11.3 All settings
6.2.3 International except to home
6.2.4 All incoming
6.2.5 Incoming while abroad
6.2.6 Cancel all
6.2.7 Change barring password
6.3 Call waiting
6.3.1 Voice calls
6.3.2 Fax calls
6.3.3 Data calls
6.3.4 Cancel all
6.4 Network selection
6.5 Caller ID
*
6.6 Active Line
* Shown only if it is supported by your SIM card.
* Shown only if it is supported by your SIM card.
53
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Menus
Phonebook Menu
Phonebook offers the following features:
7. Funbox (see page 132)
*
7.1 WWW services
• Phonebook: allows you to find, create or set up
the speed-dialling feature and manage
Phonebook entries.
7.1.1 Home
7.1.2 Bookmark
7.1.3 Go to URL
7.1.4 Clear cache
7.1.5 Proxy settings
7.1.6 Current proxy
7.1.7 Push messages
7.2 Media box
• Management: allows you to create or remove
your own number, set up caller groups and check
the memory status.
• Services: allows you to use the service directory
depending on your SIM card.
7.2.1 Images
7.2.2 Sounds
7.2.3 Delete all
7.2.4 Memory status
7.3 JAVA world
Find Name (Phonebook 1.1)
7.3.1 Downloads
7.3.2 DNS setting
7.3.3 Memory status
To search for a number in the phonebook, proceed
as follows.
1. Enter a letter(s) of the name that you want to
find.
**
8. SIM AT
The Phonebook entries are listed, highlighting
the entry matching your input.
2. If necessary, press the Up or Down key to scroll
to the entry you want.
3. Once you have found the entry, press the Ok
soft key.
4.
To
Press the
dial the displayed
number
key.
* May not be shown or supported by your network service provider.
**Shown only if it is supported by your SIM card.
54
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Phonebook Menu
Phonebook Menu
The following options are available:
4.
To
Press the
Edit number
change the
Phonebook entries
Options soft key. For
further details, see the
page 56.
This option allows you to change the number. You
can also add a new number if none has been stored
for the selected category.
Changing the Phone Memory Entries
Change name
Scroll to the category that you want to edit by
pressing the Left or Right key. Following categories
are available and you can edit information of each
category by pressing the Options soft key.
This option allows you to change the name of the
entry.
To clear the old name, press the C key. For more
information about how to enter characters, see
page 37.
Category Options
Send message
Mobile
Home
Office
Fax
Select one of the following options. For
details for these options, refer to the
page 57.
This option allows you to send a message to the
number. For more information about how to send a
message, see page 66.
Edit number
Change name
Other
Copy
Send message (shown if the category
contains a number)
Copy (shown if the category contains a
number)
This option allows you to copy the entry from the
phone’s memory to the SIM card, and vice versa.
Delete entry
Delete entry
This option allows you to delete the entry from
Phonebook. To confirm the deletion, press the Yes
soft key. Otherwise, press the No soft key.
E-Mail
Group
Graphic
Alert
Enter or edit e-mail address
Set one of the groups or no group
Set one of the images or no image
Set one of the melody or not assign
Changing the SIM Memory Entries
To change the SIM memory entry’s information,
press the Options soft key.
57
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Phonebook Menu
Phonebook Menu
6. When you are satisfied, press the OK soft key.
Add Entry (Phonebook 1.2)
7. If you select Phone in step 3, go to step 8.
You can store phone numbers and the
If you select SIM in step 3, enter the location
number and press the Ok soft key.
corresponding names in the memory of your SIM
card. In addition, you can store up to 1000 names
in the phone memory and each name can be
associated with up to five numbers.
8. If you want to change the entry, use the options.
for information about how to do it, see
ppage 56.
1. Enter the number you want to save.
If you want to return to Idle mode, press the
Notes
• If you make a mistake while entering a number,
correct it using the key. For further details, see
page 26
:
soft key or the
key.
C
Storing a Number in Idle Mode
.
• To insert a dialling pause for special phone
services, such as banking by phone, hold down
As soon as you start to enter a number, Save
appears above the left soft key to allow you to store
the number in Phonebook.
the
key. “P” is displayed to indicate the pause.
Continue the procedure from step 1 on page 58 to
store the number.
2. When you are sure that the number is correct,
press the Save soft key.
3. Select the memory where the number is to be
stored, either Phone or SIM, and press the
Select soft key.
Speed List (Phonebook 1.3)
Note: If you change phones, any numbers stored
in your SIM card will automatically be
available with the new phone, whereas any
numbers stored in the phone’s memory
must be stored again.
You can set up to eight speed-dial entries and then
dial them easily whenever you want, simply by
pressing the associated number key.
Setting Up Speed-dial Entries
4. If you select SIM in step 3, go to step 5.
1. Press the Up or Down key to scroll to an empty
If you select Phone in step 3, choose a number
type using the Up or Down key and press the
Select soft key.
location and press the Select soft key.
2. When the Edit number option highlights, press
the Select soft key.
5. Enter the associated name.
For information about how to enter characters,
see page 37.
59
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Phonebook Menu
Phonebook Menu
3. Enter a phone number and press the Ok soft
Dialling a Number Stored in the SIM Card
key. Or,
Once you have stored phone numbers in your SIM
card, you can dial them easily whenever required.
To retrieve a number from your Phonebook,
press the Phonebook soft key. Select an entry
from the list and press the Ok soft key. Press
the Ok soft key to save it.
To dial a number stored in the SIM card:
1. Enter the number of the SIM card location where
the number you want to dial is stored.
4. When you have finished, press the
the key to exit.
soft key or
2. Press the
key.
The display shows the name and number stored
in that location.
Editing the Speed-dial Entries
1. Select the speed-dial entry you want to edit
3. Press the Dial soft key or the
key.
from the list and press the Select soft key.
2. Select one of the following menu options by
pressing the Up or Down key and press the
Select soft key:
Copy All to Phone (Phonebook 1.4)
• Edit number: allows you to change the
number.
You can copy all of the numbers stored in the SIM
card to the phone’s memory.
• Change name: allows you to change the
name of the entry.
1. When a confirming message appears, press the
Yes soft key to copy.
• Delete: allows you to clear the setting so that
no number is assigned to the key.
The number are copied to the phone’s memory,
labelled with Mobile by default.
3. When you have finished, press the
the key to exit.
soft key or
Otherwise, press the No soft key.
2. When you have finished, press the
the key to exit.
soft key or
Using the Speed-dial Feature
When the idle screen is displayed, press the number
key, 2 to 9, assigned to the speed-dial entry and
press the
key. You can also press and hold the
number key.
Note: The
1
key is reserved for your voice mail server
number.
61
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Phonebook Menu
Phonebook Menu
Delete All (Phonebook 1.5)
Own Number (Phonebook 2.1)
You can delete Phonebook entries selectively
depending on the memory location, or all entries at
once.
To store your own phone number(s) with a name:
1. Scroll to an empty location by pressing the Up or
Down key and press the Select soft key.
1. Scroll to the desired memory and place a check
mark ahead of it by pressing the Select soft
key.
2. When Edit number highlights, press the Select
soft key.
Selecting All places check marks on all of the
3. Enter your number and press the Ok key.
memories.
4. To assign a name, press the Down key to move
2. If necessary, repeat step 1 to check another
options.
to Change name and press the Select soft key.
5. Enter a name and press the Ok soft key.
3. When you have finished checking, press the Ok
6. When you have finished, press the
the key to exit.
soft key or
soft key.
4. When a confirming message appears, press the
Yes soft key to delete all of the entries in the
memory(ies). Then enter the phone password
and press the Ok soft key. The password is
preset to “00000000” by default. To change it,
see page 105.
To remove one of your numbers:
1. Select the entry you want to delete from the
Own number list and press the Select soft key.
2. Scroll to Delete by pressing the Up or Down key
and press the Select soft key.
Otherwise, press the No soft key.
3. When a confirming message appears, press the
Yes soft key to delete the number.
Otherwise, press the No soft key.
4. When you have finished, press the
the key to exit.
soft key or
63
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Phonebook Menu
Phonebook Menu
Group Setting (Phonebook 2.2)
Memory Status (Phonebook 2.3)
You can change the settings of the five predefined
caller groups.
You can check how many names and numbers are
stored in Phonebook, SIM card and phone’s
memories, and how many free locations remain.
1. Select a caller group by pressing the Up or Down
When you have finished, press the
the key to exit.
soft key or
key and press the Select soft key.
2. Scroll to a setting option by pressing the Up or
Down key and press the Select soft key.
The following options are available:
Service Directory (Phonebook 3.1)
• Melody: allows you to select a melody to
sound when a call comes in from a member in
the group.
Note: This feature may not be available depending on
your SIM card.
• Change name: allows you to change the
name of the group; for further details about
how to enter characters, see page 37.
The display shows the list of the numbers in the
Service Directory.
If necessary, scroll to a number by pressing the Up
• View image: shows the image to display
when a call comes in from a member in the
group.
or Down key and press the
number.
key to dial the
3. Change the setting as required and press the
Select soft key.
4. Repeat steps 1 and 3 to change other options.
When you have finished, press the
the key to exit.
soft key or
65
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Messages
Messages
To read the new message(s) immediately, press the
View soft key. The list of the messages appears.
This menu allows you to create, send, read and
save messages with the Short Message Service
(SMS: text message), Enhanced Message Service
(EMS: message including simple image, animation
or melody) and Multimedia Message Service
(MMS: message supporting the presentation of
various media types, such as full colour images and
polyphonic ring tones). Voice mails are also
available.
Note: To clear the new message notification on the
display, press the
key.
Managing memory
Inbox and Outbox share a given amount of memory
in your phone or SIM card. When the message
memory is full, the New message icon (
and an error message displays. (It disappears when
you press the key, but it reappears if you don’t
) blinks
Note: This feature is only available if your service
provider’s network supports it. Contact your
service provider for more information.
delete old messages.) In this case, you cannot
receive any new messages. You must delete one or
more old messages to get free memory for new
messages using the Delete option within Inbox or
Outbox or the Delete all option; for further details,
see page 72.
Short Message (Menu 1.1)
Short message service (SMS) allows you to send
and receive short text messages to and from other
GSM mobile phones. In addition, your phone
supports the Enhanced Messaging Service (EMS),
which enables you to make short messages
consisting of simple pictures, melodies, animations
and styled text all of which adds a new dimension to
simple text messages.
Inbox (Menu 1.1.1)
Your phone receives incoming messages and saves
them in Inbox. SMS is usually saved in the SIM
card, but if the SIM memory is full, the incoming
messages will be saved in the phone’s memory.
To send text messages by phone, you must obtain
the number of the SMS centre from your service
provider.
When the Inbox menu is selected, the list of
messages received displays with the:
• sender’s phone number, or name if stored in
Phonebook.
Receiving a new message
When you receive a new message, the New
• message status;
message to read or
message.
for a read message,
for an incomplete
for a
message icon (
) and a text notification showing
the number of the message appear on the display.
You also hear an alert, depending on the message
sound setting; for further details, see page 96.
67
66
Download from Www.Somanuals.com. All Manuals Search And Download.
Messages
Messages
To view a message, scroll to it and press the Select
soft key. The screen shows the:
New Message (Menu 1.1.2)
Using this menu, you can write messages,
containing text, images and melodies.
• date and time when the message was received.
• memory where the message was stored;
for
1. Create a message.
the SIM card or
for the phone’s memory.
• message contents.
On the first line of the display, you see the
number of remaining characters you can enter,
the number of current message and the
maximum messages you can create, and the
font style you set in Text option.
You can scroll to the next or previous message by
pressing the Left or Right key.
To scroll through the message contents, press the
Up or Down key. When you focus on an object that
includes a melody, the melody is played.
Note: For further information about how to enter
characters, see page 37.
You can choose the following options by pressing
the Options soft key:
2. While entering your message, press the
Options soft key to use the following options.
Delete: allows you to delete the message.
• Send: allows you to send the message. Refer
to the next step.
Message reply: allows you to reply by sending a
message.
• Text: allows you to format the text. Following
text attributes can all be combined as
required.
Call back: allows you to call the sender back.
Cut address: extracts phone numbers, email
addresses or URL addresses in the text, so that you
can call the number or send a message to the
number or save it in your Phonebook.
Text size: Small/Medium/Large
Text mode: Normal/Underscore/Strikethrough
Bold: On/Off
Send: allows you to send the message to another
person.
Italic: On/Off
Alignment: Left/Center/Right
Edit: allows you to edit the message.
Extract media: you can save media (except the
predefined EMS animations and sounds) from the
message into Media box. You can use these items
when writing a message; for further details, see
below.
Note: The text attributes you can use are different
depending on whether you are entering
English or Chinese.
• Add media: allows you to add pictures,
animations and/or melodies to the message.
Transfer: allows you to transfer the message from
the SIM card to the phone’s memory.
69
68
Download from Www.Somanuals.com. All Manuals Search And Download.
Messages
Messages
• Select a category; Add picture, Add
Note: When the phone fails to send the message,
animation or Add melody. You can then
choose a factory-set object or an object that
you have received from another source and
stored in the Media box. See page 138.
press the Retry soft key to try again the
transmission. Or, press the No soft key and the
Save soft key to save the message or exit the
menu by pressing the No soft key.
• Preset messages: allows you to add a preset
message to your text. Select one of nine
messages stored in the Preset messages
menu option (Menu 1.4). See page 85.
Outbox (Menu 1.1.3)
Outbox stores any messages that you have already
sent or just saved without sending.
• Save message: allows you to save the
message so that it can be sent later. You can
read the message in Outbox.
When the Outbox menu option is selected, the list
of messages you have sent or saved displays with
the:
3. When you have finished entering your message,
• recipient’s phone number, or name if stored in
Phonebook.
choose Send from the options.
4. Enter a destination number on the Address
screen.
• message status;
a message to send.
for a sent message or
for
You can search for a number in Phonebook by
pressing the Phonebook soft key.
To view a message, scroll to it and press the Select
soft key. The screen shows the:
Note: To clear or clear all your input, press or
press and hold the C key. When you have
no input, press and hold the C key to move
to the previous screen.
• message status;
a message to send.
for a sent message or
for
for
• memory where the message was stored;
the SIM card or
for the phone’s memory.
To send the message to multiple destinations up
to 5, press the Add soft key and repeat step 4.
• message contents.
You can scroll to the next or previous message by
pressing the Left or Right key.
5. When you have finished entering the numbers,
press the Ok soft key.
To scroll through the message, press the Up or
Down key.
6. If the Enter centre screen displays, enter the
service number and press the Ok soft key.
You can store the SMS service centre number. For
details, see page 87.
71
70
Download from Www.Somanuals.com. All Manuals Search And Download.
Messages
Messages
You can choose the following options by pressing
the Options soft key:
Multimedia Message (Menu 1.2)
Multimedia Message Service (MMS) is a messaging
service very similar to Short Message Service
(SMS). It provides asynchronous delivery of
personal multimedia messages from between
phone and phone, phone and e-mail, phone and
web(by URL).
Delete: allows you to delete the message.
Cut address: extracts phone numbers, email
addresses or URL addresses in the text, so that you
can call the number or send a message to the
number or save it in your Phonebook.
Send: allows you to send the message to another
person.
In addition to the familiar text content of text
messages, multimedia messages can contain
images, graphics, voice and sounds. An MMS
message is a multimedia presentation in a single
entry. It is not a text file with attachments.
Edit: allows you to edit the message.
Transfer: allows you to transfer the message from
the SIM card to the phone’s memory or vice versa.
Using the MMS feature, your phone can receive
multimedia messages. You can also send picture
messages. This function is available only if it is
supported by your service provider. Only phones
that offer picture message features can receive and
display picture messages.
Delete All (Menu 1.1.4)
You can delete all messages stored in the SIM card
and phone’s memory in this menu.
1. Scroll to a message box and place a check mark
Retrieving a new message
ahead of it by pressing the Select soft key.
When you are retrieving a message, the Retrieving
Selecting All places check marks on all of the
message boxes.
icon (
retrieving a new message, the New message icon
) and a text notification showing the number of
) appears on the display. When you finish
(
2. If necessary, repeat step 1 to check another
box.
the message appear on the display. You also hear
an alert, depending on the message sound setting;
for further details, see page 96.
3. When you have finished checking, press the Ok
soft key.
To read the new message in Idle mode, press the
View soft key. And then you see the list in Inbox. If
you select a message, you can read it.
4. When a confirming message appears, press the
Yes soft key to delete all of the messages in the
box(es).
Otherwise, press the No soft key.
73
72
Download from Www.Somanuals.com. All Manuals Search And Download.
Messages
Messages
Notes
:
Inbox (Menu 1.2.1)
• When you set the Message reception (see
page 88) to Automatic, you cannot enter the
Downloads menu (Menu 7.3.1) and cannot also
access WAP sites while retrieving a new message. If
a new message comes in your phone while you play
a Java game, your phone only receive a notification
message. After playing the game, you can retrieve
the message with saved notification message.
• To clear the new message notification on the display,
Your phone receives incoming messages and saves
them in Inbox.
When the Inbox menu is selected, the list of
messages received displays with the:
• message’s subject or No subject if the message
had no subject.
• sender’s phone number, or name if stored in
Phonebook.
press the
key.
• message status;
a message to read,
for a read message,
for a read notification
for
If Message reception sets to Manual (for details,
see page 88), when the New message icon (
appears on the display, you have to retrieve
)
message and
read.
for a notification message to
messages in Inbox. You select a message with the
icon such as and in Inbox. Then you
,
Note: The icon of message status can have various
can select retrieve or delete message by pressing
the Options soft key.
forms like
,
,
as the priority that
sender fixed.
Managing memory
To view a message, scroll to it and press the Select
soft key.
When the memory is full, the New message icon
(
) blinks and an error message displays. (It
To scroll through the message contents, press the
Up or Down key. When the message has more than
one page, you can press the Left or Right key to
move through the pages or the pages are moved
through as paging timing that sender fixed
automatically.
disappears when you press the key, but it
reappears if you don’t delete old messages.) In this
case, you cannot receive any new messages. You
must delete one or more old messages to get free
memory for new messages using the Delete option
within Inbox, Outbox, Draft or My folder, or the
Delete all option; for further details, see page 83.
Notes:
• Some types of sound or picture may not be able
to play or display.
Notes:
• You can only receive up to 150 messages.
• Multimedia message boxes and Media box share a
given amount of memory in your phone. You can
also use the Delete or Delete all option to delete
some sounds or images in Media box.
• When the message has an attachment like video
clips, the Attachment icon (
) appears on the
title line. You may not play the attachment. And
you may also not extract it from the message.
75
74
Download from Www.Somanuals.com. All Manuals Search And Download.
Messages
Messages
You can choose the following options by pressing
the Opt. soft key:
Item
How to add
Delete: deletes the message
Subject 1. Enter a subject of your message.
For details about entering
Replay: replays the message.
characters, see page 37.
Reply: replies to the sender by sending a message.
Forward: forwards the message to another person.
Call back: allows you to call the sender back.
2. Press the Ok soft key.
Note: To move a previous screen while
entering a message, press and hold
the
C
key.
Cut media: extracts the picture or sound, so that
you can set them as a wallpaper or ringtone or you
can send them as a multimedia message.
Picture 1. Select one of the pictures you want to
add. The picture is displayed.
2. Press the Add soft key.
Cut address: extracts phone numbers, email
addresses or URL addresses in the text, so that you
can call the number or send a message to the
number or save it in your Phonebook.
Sound
To add a new sound;
1. Select the Record new option.
2. Press the Record soft key to start
recording.
Properties: shows you detailed information about
the message.
3. Press the Stop soft key to stop
recording.
Move to My folder: moves the message to the My
folder for later use.
4. Press the Play soft key to replay the
sound. Or, press the Add soft key to
add it. Enter the sound’s name and
press the Ok soft key. The sound is
added to the message and saved in
Media box automatically.
New Message (Menu 1.2.2)
This menu option allows you to create a new
multimedia message and then send it to multiple
destinations.
To add a sound in Media box;
1. Select one of the sound categories.
The sound list of the category is
displayed.
1. Select one of the following items using the Up or
Down key and press the Add soft key.
2. Select one of the sounds you want to
add.
3. Press the Select soft key to add it.
77
76
Download from Www.Somanuals.com. All Manuals Search And Download.
Messages
Item
Messages
• Save message: saves the message in Draft
(Menu 1.2.4) or My folder (Menu 1.2.5).
How to add
Message 1. Enter a new message. Or you can
enter a preset message.
Note: To go back to the edit screen, press the
soft key or the
C
key.
To enter a preset message;
3. When you finish creating the message, select
• Press the Opt. soft key and select
the Preset messages.
Send from the options.
• Select one of the preset messages.
4. Select an entry on the Send screen.
2. Press the Opt. soft key and select the
If it is an empty entry, enter a destination as
below.
Done option to add the message.
Note: To move a previous screen while
Number: to enter a destination number.
entering a message, press and hold
the
C
key.
E-mail: to enter e-mail address.
2. Press the Opt. soft key to use the following
options.
Phonebook: to enter a destination from
phonebook.
• Preview: shows your message as it will
display on the recipient’s phone. To go back to
the message screen, press the Edit soft key.
To send the message, press the Send soft key
and go to step 4.
After entering a destination, press the Ok soft
key.
If it is not an empty entry, do the following
things.
• Send: allows you to send the message to
another person. Refer to the next steps.
Edit address: to edit the selected address.
Delete address: to delete the selected
address.
• Add page: allows you to add up to 10 pages.
You can move to each page using the Left or
Right key on the message screen.
Note: To clear or clear all your input, press or
press and hold the
no input, press and hold the
to the previous screen.
C
key. When you have
• Page timing: allows you to set how long one
page of the received messages displays. After
a specified time, the display automatically
scrolls to the next page.
C
key to move
5. To send the message to multiple destinations up
to 20, repeat step 4.
• Clear subject/picture/sound/message:
allows you to delete the subject, image, sound
or message by selected work.
• Delete page: allows you to delete the current
page.
79
78
Download from Www.Somanuals.com. All Manuals Search And Download.
Messages
Messages
6. When you have finished entering the
You can choose the following options by pressing
destinations, press the Send soft key.
the Opt. soft key:
Press the Cancel soft key not to send the
message.
Delete: deletes the message.
Replay: replays the message.
Send: send the message.
When the phone fails to send the message, press
the Retry soft key to try again the transmission.
Or, press the Cancel soft key to save the message.
Properties: shows you detailed information about
the message.
Outbox (Menu 1.2.3)
Move to My folder: moves the message to the My
folder for later use.
Outbox stores messages that you sent, you failed to
send and you cancelled sending.
Draft (Menu 1.2.4)
When the Outbox menu option is selected, the list
of messages you have sent or saved displays with
the:
This message box stores messages that you save,
interrupted messages by an incoming call or
message while you create a new message.
• message’s subject or No subject if the message
had no subject.
Note: Saves messages that are failed to send in
• recipient’s phone number, or name if stored in
Phonebook.
Outbox.
To view a message, scroll to it and press the Select
soft key.
• message status;
message that failed to send or you cancelled
sending, for a delivered report. When
receiver retrieve a message you sent,
changed into
for a sent message,
for a
You can choose the following options by pressing
the Opt. soft key:
is
.
Send: replies to the sender by sending a message.
Replay: replays the message.
To view a message, scroll to it and press the Select
soft key.
Delete: deletes the message.
To scroll through the message, press the Up or
Down key. When the message has more than one
page, you can press the Left or Right key to move
through the pages or the pages are moved through
as predefined page timer, which the sender sets,
has elapsed.
Properties: shows you detailed information about
the message.
81
80
Download from Www.Somanuals.com. All Manuals Search And Download.
Messages
Messages
My Folder (Menu 1.2.5)
Delete All (Menu 1.2.6)
You can move the messages stored in Inbox or
Outbox to the My folder by using the Move to My
folder option. While making a new message, you
can also save to My folder by using the Save
message option.
This menu option allows you to delete all of the
messages in each message box. You can also delete
all of your messages at one time.
1. Scroll to a message box and place a check mark
ahead of it by pressing the Select soft key.
To view a message, scroll to it and press the Select
soft key.
Selecting All places check marks on all of the
message boxes.
You can choose the following options by pressing
the Opt. soft key:
2. If necessary, repeat step 1 to check another
box.
Delete: deletes the message.
Replay: replays the message.
Send: send the message.
3. When you have finished checking, press the Ok
soft key.
4. When a confirming message appears, press the
Yes soft key to delete all of the messages in the
box(es).
Cut media: extracts the picture or sound, so that
you can set them as a wallpaper or ringtone or you
can send them as a multimedia message.
Otherwise, press the No soft key.
Cut address: extracts phone numbers, email
addresses or URL addresses in the text, so that you
can call the number or send a message to the
number or save it in your Phonebook.
Properties: shows you detailed information about
the message.
83
82
Download from Www.Somanuals.com. All Manuals Search And Download.
Messages
Messages
Voice Mail (Menu 1.3)
Preset Messages (Menu 1.4)
When you receive a voice mail, your phone displays
Using this menu, you can preset up to nine
the
icon and you hear an alert.
messages that you use most frequently. When you
access this menu, the preset message list displays.
Connect To Voice Mail (Menu 1.3.1)
1. Scroll to a message or an empty entry by
pressing the Up or Down key.
• In Idle mode, when you receive a new voice mail,
press the Connect soft key to access your voice
mail server and follow the instructions provided.
2. Press the Select soft key and enter a new
message or change the old message.
• In Idle mode, hold the 1 key down to access your
voice mail server and follow the instructions
provided.
For further details about entering characters,
see page 37.
• Call your voice mail server number by accessing
the Connect to voice mail menu (Menu 1.3.1)
and follow the instructions provided.
3. Press the Ok soft key to save the message.
Broadcast (Menu 1.5)
Voice Server Number (Menu 1.3.2)
This network service allows you to receive text
messages on various topics, such as the weather or
traffic. Messages are displayed immediately as they
are received, provided that:
Before using the voice mail service, you must store
the voice mail server number obtained from your
service provider.
When you select an entry, following options are
available:
• the phone is in Idle mode.
• the Receive option (Menu 1.5.2) is set to On.
Edit number: enter a voice mail server number or
press the Phonebook soft key to enter a number
from phonebook. And then press the Ok soft key.
• the message channel is currently active on the
channel list.
When you get broadcast messages, you can see the
messages in Idle mode. If it is short you can see
the display, otherwise, press the view soft key to
read the message.
Change name: enter a server name and press the
Ok soft key to save it.
Delete: when the confirming message appears,
press the Yes soft key. To cancel, press the No soft
key.
85
84
Download from Www.Somanuals.com. All Manuals Search And Download.
Messages
Messages
In the Broadcast menu option, the following
options are available:
Settings (Menu 1.6)
Read: lets you read the received broadcast
messages.
Short Message (Menu 1.6.1)
Using this menu, you can set up default SMS
information. The following options are available:
Archive: shows the list of the messages you saved
from the temporary list.
Service centre: allows you to store or change the
number of your SMS centre required when sending
messages. You must obtain this number from your
service provider.
Temporary: shows the latest messages. These
messages will be gone when the phone is switched
off.
If the message is long, press the UP or Down key.
Validity period: allows you to set the length of
time your messages are stored at the message
centre while attempts are made to deliver them.
When you read a message, press the Options soft
key to access following options:
Cut number: shows the list of numbers included in
the message.
Message type: allows you to set the message type
to Text, Fax, Voice, ERMES, X400, or E-Mail.
The network can convert the messages into the
selected format.
Save: (Temporary only) saves this message to
Archive list.
Reply path: allows the recipient of your SMS
message to send you a reply via your message
centre, if the service is provided by the network.
Delete: delete this message.
Delete All: delete all message on the list.
Delivery report: allows you to set on or off. When
this function is set to on, the network informs you
whether or not your message has been delivered.
Receive: allows you to turn the reception of
broadcast messages on or off.
Channel: the check mark inside All check box
indicates that the channel is enabled.
Multimedia Message (Menu 1.6.2)
To enable or disable this channel press the Select
soft key, then select Enable or Disable.
Using this menu, you can set up default settings for
sending or receiving MMS message. The following
options are available:
The Add channel option allows you to add a new
channel to the channel list. Enter the appropriate
channel code obtained from your service provider
and a title for the channel.
Send settings: The following options are available:
Priority: allows you to set the priority of message.
Language: selects a language you prefer. Then,
You can get cell broadcast messages only in the
language you selected.
Validity period: allows you to set the length of time
your messages are stored at the message centre
while attempts are made to deliver them.
87
86
Download from Www.Somanuals.com. All Manuals Search And Download.
Messages
Messages
Delivery after: you can set the delay time before
the phone sends your messages.
• Profile name: enter the name of the profile.
• Server URL: enter the address of profile server.
Leave a copy: allows you to copy the message that
you sent.
• GSM setting: allows you to change the proxy
settings for the GSM network.
Address hiding: when this option sets to On, your
phone number does not display on the recipients
phone.
- Gateway: enter the IP address and IP port.
- Data call type: select a network connection
type between ISDN and Analogue.
Delivery report: when this option sets to On, the
network informs you whether or not your message
has been delivered.
- Dial number: enter the server phone
number.
- Login ID: enter the server login ID.
- Password: enter the server password.
Read reply: when this option sets to On, your
recipient’s phone sends a reply to let you know
when your message was read by her/him.
• GPRS setting: allows you to change the proxy
settings for the GPRS network.
Receive settings: the following options are
available:
- Gateway: enter the IP address and IP port.
Message reception: allows you to set how you
receive a message. You can select one of Manual,
Automatic and Reject.
- APN: enter the access point name used for
the address of the GPRS network gateway.
- Login ID: enter the user ID required to connect
to GPRS network.
Anonymous reject: when this option sets to On,
your phone rejects messages without a caller ID.
- Password: enter the password required to
connect to the GPRS network.
Adverts reject: when this option sets to On, you
can reject advertisements by service provider.
• Bearer: select the bearer to be used for each type
of network accesses.
Report allowed: when this option sets to On, your
phone does not send a reply to the recipient’s
phone even if the sender asks for the read reply.
- GPRS only: it only works in GPRS network.
- GSM only: it only works in GSM network.
MMS profiles: in this menu, you can configure
MMS profile settings that are required when you
send or receive multimedia messages.
Current profile: allows you to select one profile to
use currently.
Profile setting: allows you to set up to five profiles.
89
88
Download from Www.Somanuals.com. All Manuals Search And Download.
Messages
Call Records
Via this menu, you can view the:
• calls you missed, received or dialled.
• cost of your calls.
Memory Status (Menu 1.7)
You can check the memory status for messages.
Short Message (Menu 1.7.1)
• length of your calls.
You can check how many messages are stored in
SIM card and phone’s memory.
Note: You can access the numbers in the three types
of call records by pressing the
mode.
key in Idle
When you have finished, press the
the key to exit.
soft key or
Missed Calls (Menu 2.1)
Multimedia Message (Menu 1.7.2)
This option lets you view the last 20 unanswered
calls if the caller line identification is available.
Multimedia message boxes and Media box share a
given amount of memory in your phone.
The number, or name if available, displays together
with the date and time when the call was missed.
The display shows the status of free and used
memory.
By pressing the Options soft key, you can also:
• delete the current call record from the list.
• delete all of the call records.
You can see the used memory status of Multimedia
message boxes and Media box by pressing the Left
or Right key.
• paste the number into the Phonebook.
Received Calls (Menu 2.2)
This option lets you view the last 20 received calls if
the caller line identification is available.
The number, or name if available, displays together
with the date and time when the call was received.
By pressing the Options soft key, you can also:
• delete the current call record from the list.
• delete all of the call records.
• paste the number into the Phonebook.
90
91
Download from Www.Somanuals.com. All Manuals Search And Download.
Call Records
Call Records
Dialled Calls (Menu 2.3)
Call Time (Menu 2.5)
This option lets you view the last 20 dialled
numbers.
This option lets you view the timers for calls made
and received.
The number, or name if available, displays together
with the date and time when the call was made.
Notes:
• If your SIM card supports the ALS (Alternate Line
Service) feature, you must first select the
appropriate line.
• The actual time invoiced for calls by your service
provider may vary, depending on network features,
rounding-off for billing purposes and others.
By pressing the Options soft key, you can also:
• delete the current call record from the list.
• delete all the call records.
• paste the number into the Phonebook.
The following timers are available:
Last call time: the length of the last call.
Delete All (Menu 2.4)
Total sent: the total length of all calls made since
the timer was last reset.
You can delete all of the numbers, selectively
depending on the record types or all together.
Total received: the total length of all calls
received since the timer was last reset.
When a confirming message appears press the Yes
soft key to confirm. Otherwise, press the No soft
key.
You can use the Reset timers option to reset the
call timers.
93
92
Download from Www.Somanuals.com. All Manuals Search And Download.
Call Records
Sound Settings
You can use the Sound Settings feature to
customise various settings, such as the:
Call Costs (Menu 2.6)
This feature lets you view the cost of calls.
• ring tone, volume and type for incoming calls or
messages.
Notes:
• This feature is not intended to be used for billing
purposes.
• volume for the voice prompt.
• AOC (Advice Of Charge) information may display in
Idle mode, depending on your SIM card or service
provider.
• sounds made when your call is connected or
when you press a key.
• Quiet Mode to which your phone switches when
you hold down the
key.
The following options are available:
Last call cost: cost of the last call made.
Total cost: total cost of all calls made since the
cost counter was last reset. If the total cost exceeds
the maximum cost set via the Set max cost
option, you can no longer make any calls until you
reset the counter.
Incoming Calls (Menu 3.1)
This option allows you to set up the ringer for
incoming calls.
Note: If your SIM card supports the ALS (Alternate
Line Service) feature, you must select the line
you wish to change first.
Max cost: maximum cost set via the Set max cost
option (see below).
Reset counters: option used to reset the cost
counter; you must first enter your PIN2 (see
page 151) and then press the Ok soft key.
The following options are available:
Each time you select a melody from the list, it plays
the melody.
Set max cost: option used to enter the maximum
cost that you authorise for your calls; you must first
enter your PIN2 (see page 151) and then press the
Ok soft key.
Default melodies: allows you to select one of the
predefined melodies.
My sounds: allows you to select one of sounds
received from other sources, such as the WAP sites
or multimedia messages.
Price/Unit: option used to set the cost of one unit;
this price per unit is applied when calculating the
cost of your calls; you must first enter your PIN2
(see page 151) and then press the Ok soft key.
Ring volume: allows you to adjust the ring
volume. Use the Up and Down keys or the volume
94
95
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound Settings
Sound Settings
keys on the left side of the phone. The more bars
you see, the louder the volume.
Vibration then tone: the phone first vibrates and
then starts ringing.
Alert type: lets you specify how you are informed
of any incoming calls.
Light only: only the service light is switched on; the
phone neither rings nor vibrates.
Melody: the phone rings using the melody selected
via the Melody option. See above.
Repetition: allows you to specify how often the
phone informs you of a new message. You can
choose either Once or Periodic.
Vibration: the phone vibrates but does not ring.
Vibration then melody: the phone first vibrates and
then starts ringing.
Power On/Off (Menu 3.3)
Light only: only the backlight is switched on. The
phone neither rings nor vibrates.
This option allows you to select the melody that the
phone sounds when you switch it on or off.
You can choose either Basic or Cheerful. To turn
the sound off, select Off.
Messages (Menu 3.2)
This option allows you to set up the ringer for
incoming each of short messages and multimedia
messages.
Connection Tone (Menu 3.4)
This menu option allows you to specify whether or
not the phone beeps when the phone connects to
the network.
Short message (Menu 3.2.1) / Multimedia
message (Menu 3.2.2)
The following options are available:
The following options are available:
Off: the phone does not beep.
Tone: lets you choose from many different tones.
Each time you select a tone from the list, the tone is
played.
On: the phone beeps when your call is accepted.
Alert type: lets you specify how you are informed
of any incoming messages.
Tone: the phone rings using the tone selected via
the Tone option. See above.
Vibration: the phone vibrates but does not ring.
97
96
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound Settings
Sound Settings
Key Tone (Menu 3.5)
Quiet Mode (Menu 3.7)
When you hold the key down in Idle mode, the
phone switches to the Quiet Mode. You can specify
whether the phone vibrates or mutes about all
sounds in the Quiet Mode.
This menu option allows you to select the tone that
the keypad sounds when you press a dial key.
The following options are available:
Off: the keys do not make any sound.
The following options are available:
Tone: each key, when pressed, makes a different
sound.
Vibration: the phone vibrates rather than rings in
the Quiet Mode.
Beep: each key, when pressed, makes the same
sound.
Mute: the phone mutes sound settings in the Quiet
Mode.
Woman: each key, when pressed, makes woman’s
voice.
Girl: each key, when pressed, makes girl’s voice.
Piano: each key, when pressed, makes a sound
like playing the piano.
Drum: each key, when pressed, makes a sound
like playing the drum.
To adjust the key tone volume, press the volume
keys on the left side of the phone in Idle mode.
Minute Minder (Menu 3.6)
This menu option allows you to specify whether or
not the phone beeps every minute during a call to
keep you informed of the length of your call.
The following options are available:
Off: the phone does not beep.
On: the phone beeps every minute.
99
98
Download from Www.Somanuals.com. All Manuals Search And Download.
Phone Settings
Phone Settings
Many different features of your phone can be
customised to suit your preferences via the
Phone Settings menu.
Display (Menu 4.2)
You can change the background image and the
colour of the components on the display according
to your preference and needs.
Greeting Message (Menu 4.1)
Wallpaper (Menu 4.2.1)
This option allows you to change the background
image to be displayed in Idle mode.
This menu option allows you to set a greeting
message to be displayed briefly when the phone is
switched on.
The following options are available:
When you access this menu, the current message
displays.
Animations: allows you to select one of the
animations.
Images: allows you to select one of images in the
Image box in the Media box menu that are
downloaded from the Internet or the EasyStudio PC
software.
To
Press the
clear the existing
message
C key and hold it down.
Text position: allows you to select the position of
the text displayed on the idle screen, such as the
operator’s name, current date and time, and text
notifications of missed calls or new messages.
Choose either Top or Bottom. If you set this option
to Off, your phone displays only the wallpaper
image.
enter a new
message
appropriate alphanumeric
keys.
save your input
Ok soft key.
cancel your input
and return to Idle
mode
key.
Text style: allows you to set the style of the text
displayed on the idle screen.
For further information on how to enter text, see
page 37.
Note: When you set the wallpaper image to
Calendar, the Text position and Text style
options don’t work.
101
100
Download from Www.Somanuals.com. All Manuals Search And Download.
Phone Settings
Phone Settings
Skin (Menu 4.2.2)
Auto Keylock (Menu 4.3)
You can change the colour setting of the display
components, such as text, soft key indications area
or the menu names and icons.
You can set the phone to automatically lock the
keys if no key is pressed within a given of time. This
feature is useful to avoid pressing keys by mistake.
To use this feature, select the length of time for
which the phone waits before it locks the keypad.
Backlight (Menu 4.2.3)
You can specify how long the phone uses the
backlight.
15 sec, 30 sec, 1 Min and 2 Min are available.
If you don’t want to use this feature, select Off.
Select how long the backlight remains on after the
last key is pressed.
Note: You can manually lock the keypad. For further
details. see page 25.
LCD Contrast (Menu 4.2.4)
This option allows you to adjust the contrast of the
display.
Language (Menu 4.4)
1. Adjust the contrast by using the Up and Down
keys or the volume keys on the left side of the
phone.
You can select a display language.
2. When you are satisfied, press the Ok soft key to
save the selection.
103
102
Download from Www.Somanuals.com. All Manuals Search And Download.
Phone Settings
Phone Settings
Phone Lock (Menu 4.5.3)
Security (Menu 4.5)
When the Phone Lock feature is enabled, the phone
is locked and you must enter the 8-digit phone
password each time the phone is switched on.
The security settings enable you to restrict the use
of your phone to the people and types of calls of
your choice.
The password is preset to “00000000” at the
factory. To change the phone password, see the
Change password menu option on the following
page.
Various codes and passwords are used to protect
the features of your phone. They are described in
the following sections. See also page 150 -152.
Once the correct password has been entered, you
can use the phone until you switch it off.
PIN Check (Menu 4.5.1)
When the PIN Check feature is enabled, you must
enter your PIN each time you switch the phone on.
Consequently, any person who does not have your
PIN cannot use your phone without your approval.
The following options are available:
Disable: you are not asked to enter the phone
password when you switch the phone on.
Enable: you are required to enter the phone
Note: Before disabling the PIN Check feature, you
password when you switch the phone on.
must enter your PIN.
The following options are available:
Change Password (Menu 4.5.4)
Disable: the phone connects directly to the
network when you switch it on.
The Change Password feature allows you to change
your current phone password to a new one. You
must enter the current password before you can
specify a new one.
Enable: you must enter the PIN each time the
phone is switched on.
To change your PIN, see the Change PIN menu
option. See below.
The password is preset to “00000000” at the
factory. Once you have entered a new password,
you are asked to confirm it by entering it again.
Change PIN (Menu 4.5.2)
Privacy (Menu 4.5.5)
This feature allows you to change your current PIN
to a new one, provided that the PIN Check feature
is enabled. You must enter the current PIN before
you can specify a new one.
This feature allows you to lock or unlock the usage
of the contents, such as multimedia messages,
images and sounds.
Once you have entered a new PIN, you are asked to
confirm it by entering it again.
To enable or disable the privacy feature, you must
enter your password.
105
104
Download from Www.Somanuals.com. All Manuals Search And Download.
Phone Settings
Phone Settings
SIM Lock (Menu 4.5.6)
Change PIN2 (Menu 4.5.8)
To enable the SIM Lock feature, you must enter a
new four- to eight-digit SIM lock code, and confirm
it by entering it again.
The Change PIN2 feature allows you to change your
current PIN2 to a new one. You must enter the
current PIN2 before you can specify a new one.
Once you have entered a new PIN2, you are asked
to confirm it by entering it again.
The following options are available:
Disable: you can use any other SIM cards with
your phone.
Note: Not all SIM cards have a PIN2. If your SIM card
does not, this menu option is not displayed.
Enable: you must enter the SIM lock code to use
another SIM card with your phone.
To unlock the SIM, enter the SIM lock code.
Auto Redial (Menu 4.6)
FDN Mode (Menu 4.5.7)
With the Auto Redial function, the phone makes up
to ten attempts to redial a phone number after an
unsuccessful call.
The FDN (Fixed Dial Number) mode, if supported by
your SIM card, allows you to restrict your outgoing
calls to a limited set of phone numbers.
Note: The interval between two call attempts varies.
The following options are available:
The following options are available:
Off: the number is not redialled.
Disable: you can phone any number.
Enable: you can only call phone numbers stored in
Phonebook. You must enter your PIN2.
On: the number is redialled automatically.
Note: Not all SIM cards have a PIN2. If your SIM card
does not, this menu option is not displayed.
Anykey Answer (Menu 4.7)
To change your PIN2, see the Change PIN2 menu
option. See below.
You can answer incoming calls by pressing anykey
or not.
Off: You can only press
or the Accept soft key
to answer incoming calls.
On: you can press any key, except
and the
Reject soft key to answer.
107
106
Download from Www.Somanuals.com. All Manuals Search And Download.
Phone Settings
Phone Settings
Auto Answer (Menu 4.8)
Service Light (Menu 4.10)
The phone automatically answers calls after 3,5,
and 10 seconds. You can also turn this feature off.
You can turn off the service light and change the
colour of the service light.
Note: This feature is only available when the phone is
connected to a car kit (optional).
Reset Settings (Menu 4.11)
This menu option allows you to reset your phone to
its default configuration. You can reset the sound
settings, phone settings or all of the settings
together.
Fax Mode (Menu 4.9)
You can use your phone as a modem for faxing
when it is connected to computing devices. You
need to purchase a data kit from your local
Samsung dealer.
1. Select one of the settings to reset by pressing
the Select soft key.
In this menu, you can enable the fax mode on your
phone.
2. When a confirming message appears, press the
Yes soft key to reset settings. Then enter the
phone password and press the Ok soft key.
The following options are available:
The password is preset to “00000000”by
default. To change it, see page 105.
Off: you can send or receive data calls.
On: you can send or receive fax calls.
In any case you can send or receive voice calls.
Otherwise, press the No soft key.
After connecting the phone to your computing
device using the data cable and set this menu to
On. Your phone works as a fax modem.
For further details about setting and faxing through
the phone on your computer, see the computers
user’s manual.
109
108
Download from Www.Somanuals.com. All Manuals Search And Download.
Organiser
Organiser
• Call: calls you need to make.
The Organiser feature enables you to:
• Anniversary: anniversaries to be
remembered, such as wedding anniversaries,
birthdays or other special days.
• view the calendar and/or write a memo or to do
list.
• set the current date and time, and find out what
time it is in various cities around the world.
Note: You can save up to 25 items to each
category, so you can save 100 memos
totally.
• set the alarm so that the phone rings at a specific
time.
3. Scroll to a date on the calendar by pressing the
• use your phone as a calculator, unit convertor,
timer or stopwatch.
navigation keys. Press the Select soft key.
4. If applicable depending on the category you
selected, enter the event time and press the Ok
soft key.
New Memo (Menu 5.1)
5. If you have selected the 12-hour time format
(see page 117), select AM or PM by pressing
the Up or Down key and then press the Select
soft key.
This menu option allows you to create a new memo.
Note: You can also access this menu by holding down
the
C
key in Idle mode.
6. To set an alarm for the memo, press the Yes
1. Write your memo of up to 100 characters and
soft key.
press the Ok soft key.
Otherwise, press the No soft key. The memo is
saved immediately. Go to Step 10.
For further information about how to enter text,
see page 37.
7. Enter the time for the alarm to sound and press
2. Select the category of the memo to be saved
the Ok soft key.
and press the Select soft key.
8. If you have selected the 12-hour time format
(see page 117), select AM or PM by pressing
the Up or Down key and then press the Select
soft key.
The following categories are available:
• Scheduler: general schedule events, such as
appointments or meetings.
• To do list: tasks you need to do. They are
saved on the to do list.
9. Select an alarm melody and press the Select
soft key.
The memo is saved and then displays on the
screen.
110
111
Download from Www.Somanuals.com. All Manuals Search And Download.
Organiser
Organiser
10. You can choose the following option by pressing
The following options are available when you press
the Options soft key:
the Options soft key on the Calendar display:
• Add: allows you to add a new memo on the
day.
Add memo: allows you to add a new memo on the
day.
• Delete: allows you to delete the memo.
Go to date: allows you to enter a particular date
and then schedule an event on that date.
• Edit: allows you to edit the memo.
View all: shows all of the events that you have
scheduled.
• Move: allows you to move the memo to a
different date.
Delete day: deletes the scheduled event on the
selected day.
• Copy: allows you to copy the memo to a
different date.
Delete all: deletes all of the events that you have
scheduled.
11.When you have finished, press the
the key to exit.
soft key or
Creating a New Memo
Calendar (Menu 5.2)
1. Scroll to a date on the calendar, referring to
page 112, and press the Select soft key.
The calendar helps you to keep track of schedule,
calls that you need to make, tasks that you need to
do and anniversaries. You can set the alarm to ring
when the set date for a schedule is reached.
2. Write your memo and press the Ok soft key.
For further information about how to enter
characters, see page 37.
3. Select the category of the memo to be saved
Consulting the Calendar
and press the Select soft key.
To
Press the
The following categories are available:
move to another
day
Left or Right key.
• Scheduler: general schedule events, such as
appointments or meetings.
move to another
week
Up or Down key.
• To do list: tasks you need to do.
• Call: calls you need to make.
move to the
previous or next
month
Up or Down key and hold it
down
• Anniversary: anniversaries to be
remembered, such as wedding anniversaries,
birthdays or other special days.
move to the
previous or next
year
Left or Right key and hold it
down.
4. Follow the procedure from Step 4 on page 111
onwards to save the memo.
112
113
Download from Www.Somanuals.com. All Manuals Search And Download.
Organiser
Organiser
Viewing Your Calendar Memos
To Do List (Menu 5.3)
A date that has a memo associated with it is
highlighted in a red box. If you select a date when
events have already been scheduled, the number of
memos of each type is shown at the bottom of the
calendar.
This menu allows you to view a list of tasks.
To create a new memo of the To do list type:
1. Write the memo about your task and press the
Ok soft key.
•
•
•
•
: General schedule events
: To do list
For more information about how to enter
characters, see page 37.
: Calls
2. Scroll to a date on the calendar, referring to
: Anniversaries
page 112, and press the Select soft key.
Press the Select soft key to view the memos.
3. Follow Step 4 on page 111 onwards to save the
memo.
If you have created more than one memo on the
same day, you can scroll to the event you want to
view by pressing the Left or Right key.
Once you have defined tasks, they are listed with a
status mark (
for Done or
for Undo) within
The following options are available when you press
the Options soft key:
the To do list menu.
To scroll to a specific task, press the Up or Down
key and press the Select soft key. The task displays
with the deadline, alarm setting, job details and
status mark.
Add: allows you to add a new memo. For further
information about how to add a memo, see
page 110.
Delete: allows you to delete the memo.
You can scroll to the previous or next task by
pressing the Left or Right key.
Edit: allows you to edit the memo.
The following options are available when you press
the Options soft key:
Move: allows you to move the memo to a different
date.
Add: allows you to add a new task. For details
about adding To do list-type memos, see page 110.
Copy: allows you to copy the memo to a different
date.
Mark: allows you to change the status mark.
Edit: allows you to edit the contents of the task.
Move: allows you to move the task to a different
date.
114
115
Download from Www.Somanuals.com. All Manuals Search And Download.
Organiser
Organiser
Copy: allows you to copy the task to a different
To select your time zone:
date.
1. Select the city corresponding to your time zone
by pressing the Left or Right key one or more
times.
Delete: allows you to delete the task.
Delete all: allows you to delete all of tasks from
the list.
The local date and time display.
2. Press the Set soft key.
Clock (Menu 5.4)
3. To
Select
This option allows you to change the current time
and date displayed. You can also check the current
time for Greenwich Mean Time (GMT) and 21 major
cities around the world.
update the current Set local.
date/time with this
new setting
indicate that the
time zone is
Set DST. The
shown next to the time
icon is
The following options are available:
currently using the difference.
daylight saving
time
Set time: allows you to enter the current time. You
can choose the time format in the Set format
menu option; see page 117.
indicate that the
time zone is no
longer using the
daylight saving
time
Remove DST (only
Note: Before setting the time, you must specify your
available when the
icon is shown next to the
time difference).
time zone in the Set world time menu option.
Set date: allows you to enter the day, month and
year. You can change the date format in the Set
format menu option; see page 117.
4. When you have finished, press the
the key to exit.
soft key or
Set world time: allows you to check the current
time in GMT and 21 major cities around the world.
Scroll through the cities using the Left or Right key.
The screen shows the:
Set format: allows you to change the time and
date formats.
• city name.
Time format: 24 hours
12 hours
• current date and time.
• time difference between the selected city and
your city if you have set the local time (see
below) or GMT (by default).
Date format: DD/MM/YYYY (day/month/year)
YYYY/MM/DD (year/month/day)
116
117
Download from Www.Somanuals.com. All Manuals Search And Download.
Organiser
Organiser
Once an alarm has been set, you can see the Alarm
Alarm (Menu 5.5)
icon (
) on the top line of the display. To stop the
alarm when it rings press any key.
This option allows you to set an alarm to ring at a
specific time. You can set up to three alarms or set
the phone to ring an alarm when it is switched off.
Note: When the Quiet Mode is activated, the alarm
tone doesn’t sound. But When you set a
Morning call, it sounds the alarm tone even if
the Quiet Mode is activated.
To set an alarm:
1. Select either Morning call, Alarm1 or Alarm2
To set the alarm to ring even if your phone is
switched off:
by pressing the Up or Down key.
The
set. The
already been set.
icon means that no alarm is currently
icon means that an alarm has
1. Scroll to Auto power on the Alarm list and
press the Select soft key.
2. If necessary, press the Up or Down key to select
2. Press the Select soft key.
3. Press the Options soft key.
On.
To turn the Auto Power feature off, select Off.
4. Scroll to an option by pressing the Up or Down
key and press the Select soft key. Change the
setting, as needed.
3. Press the Select soft key to save the setting.
4. When you have finished, press the
the key to exit.
soft key or
• Alarm day: place or remove a check mark on
the day(s) of the week by pressing the Select
soft key. If you want to set a daily alarm,
select Everyday. If you want to set a
temporary alarm, select Once alarm. When
you press the Ok soft key after selecting, your
phone asks you to enter the alarm time.
Once you have activated the auto power alarm, a
check mark appears ahead of Auto power. If the
phone is switched off at the specified alarm time, it
automatically switches on and rings the alarm. It
then automatically switches off again.
• Alarm time: enter the time for the alarm to
sound.
• Alarm tone: select an alarm melody.
• Remove alarm: deactivates the alarm.
5. Repeat Step 4 to change each setting.
6. When you have finished, press the
the key to exit.
soft key or
118
119
Download from Www.Somanuals.com. All Manuals Search And Download.
Organiser
Organiser
Calculator (Menu 5.6)
Conversion (Menu 5.7)
You can use the phone as a calculator. The
calculator performs basic arithmetic functions, such
as addition, subtraction, multiplication, division and
remainder calculations.
This menu option allows you to convert from one
type of unit to another.
To convert a value:
1. Scroll to the type of conversion to be performed
from Length, Weight, Volume, Area and
Temperature, and press the Select soft key.
To perform a calculation:
1. Enter the first number using the number keys.
Note: To erase any mistakes or clear the display,
2. Enter the value to be converted and press the
press the
C
key.
Down key to move to the From field.
2. Press the
key to enter a decimal point (.) or
You can enter a decimal point (.) using the
key.
the key to enter the appropriate arithmetic
symbol: + (add), - (subtract),
(multiply), /
3. Select the original unit by pressing the Left or
Right key and press the Down key to move to
the To field.
(divide), % (remainder), ( or ).
3. Enter the second figure.
Refer to the table on the following page for the
units available.
4. Repeat Steps 2 and 3, if necessary.
5. Press the Equal soft key to view the result.
The result appears in the Answer box.
4. Select the required unit by pressing the Left or
Right key.
Note: The result is rounded to six decimal places.
5. Press the Ok soft key or the
key to view the
result.
6. When you have finished, press the
the key to exit.
soft key or
The result appears in the Answer box.
6. When you have finished, press the
the key to exit.
soft key or
120
121
Download from Www.Somanuals.com. All Manuals Search And Download.
Organiser
Organiser
To stop the timer melody when it rings, press any
key.
Units Available
Type
Units
To stop the timer before the end, press the Stop
soft key on the Timer screen.
Length
mm
km
cm
in
m
ft
Notes
:
yard mile
kg
• The timer uses power from the battery
consequently, the phone’s operating time is
reduced.
Weight
Volume
g
ton
grain oz
pound
3
3
cm
m
l
• When the Quiet mode is activated, no sound.
3
3
3
in
ft
yd
gal
2
2
Area
cm
m
a
Stopwatch (Menu 5.9)
2
2
2
in
ft
yd
The stopwatch can be used to measure times for
various sports.
acre
°C
Temperature
°F
Example: Running or swimming races
Up to four stopwatches can be used.
Timer (Menu 5.8)
The precision of the stopwatch is one hundredth of
a second. The maximum measurement time is 10
hours.
Using the Timer feature, you can set the phone to
sound an alarm after a certain time.
1. To start the stopwatches, press the Ok soft key.
1. Press the Set soft key.
2. When you wish to stop the first stopwatch, press
the Ok soft key. Repeat this step for the other
stopwatches.
2. Enter the length of time you want to count down
in hours and minutes and press the Ok soft key.
3. Press the Start soft key to start counting down.
3. Press the Reset soft key to reset the watches.
Even if you exit the Timer screen, the timer will
continue running. After the specified time has
expired, the phone informs you by playing a melody
and displaying a text notification.
4. Press the C or
key to exit.
122
123
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Services
Network Services
These menu functions are network services.
Please contact your service provider to check their
availability and subscribe to them, if you wish.
You can specify individual call diverting options for
each of the following call types:
• Voice calls only
• Fax calls only (not available when line 2 is in use)
• Data calls only (not available when line 2 is in
use)
Call Diverting (Menu 6.1)
Example: You can:
• systematically divert fax calls to your
office fax machine.
• divert voice calls to your colleague if
you are already using the phone.
Note: The call divert options may be different
depending on your SIM card and those not
supported by your network operator may not
be shown.
This network service enables incoming calls to be
rerouted to the number that you specify.
Setting Call Diverting Options
Example: You may wish to divert your business
calls to a colleague while you are on
holiday.
1. Select the type of call diverting by pressing the
Up or Down key and then press the Select soft
key.
Call diverting can be set up in the following ways:
2. Select the type of calls to be diverted by
pressing the Up or Down key and then press the
Select soft key.
Divert always: all calls are diverted.
Busy: calls are diverted if your phone is engaged
on another call.
3. Press the Activate soft key to confirm your
settings.
No reply: calls are diverted if you do not answer
the phone.
4. Enter the number to which the calls are to be
diverted.
Unreachable: calls are diverted if you are not in an
area covered by your service provider.
To enter an international code, hold down the 0
key until the + sign displays.
Cancel all: all call diverting options are
deactivated.
You can also select a number in the Phonebook
or the voice mail server number, by pressing the
Options soft key, followed by Phonebook or
Voice server.
5. When you are satisfied, press the Ok soft key.
The phone sends your settings to the network
and the network’s acknowledgement displays.
124
125
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Services
Network Services
Cancel all: all call barring options are deactivated;
calls can be made and received normally.
Deactivating Specific Call Diverting
Options
You can specify individual call barring options for
each of the following call types:
1. Select the call diverting option to be
deactivated.
• Voice calls only
2. Select the type of calls to which this option
applies.
• Fax calls only (not available when line 2 is in use)
• Data calls only (not available when line 2 is in
use)
3. Press the Remove soft key.
The phone sends your settings to the network
and the network’s acknowledgement displays.
Setting Call Barring Options
You can also deactivate all call diverting options by
selecting the Cancel all option.
1. Select the type of call barring by pressing the Up
or Down key and then press the Select soft key.
2. Select the type of calls to be barred by pressing
the Up or Down key and then press the Select
soft key.
Call Barring (Menu 6.2)
The call barring network service allows you to
restrict your calls.
3. Press the Activate soft key to confirm your
settings.
Call barring can be set up in the following ways:
All outgoing: calls cannot be made.
4. Enter your call barring password supplied by
your service provider and press the Ok soft key.
The phone sends your settings to the network
and the network’s acknowledgement displays.
International: international calls cannot be made.
International except to home: when abroad,
calls can be made only to numbers within the
current country and to your home country, that is
the country where your home network provider is
located.
All incoming: calls cannot be received.
Incoming while abroad: calls cannot be received
when you are using your phone outside your home
service area.
126
127
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Services
Network Services
Deactivating Specific Call Barring
Options
Call Waiting (Menu 6.3)
This network service informs you when someone is
trying to reach you during another call.
1. Select the call barring option to be deactivated.
You can specify individual call waiting options for
each of the following call types:
2. Select the type of calls to which this option
applies.
• Voice calls only
3. Press the Deactivate soft key.
• Fax calls only (not available when line 2 is in use)
4. Enter your call barring password supplied by
your service provider.
• Data calls only (not available when line 2 is in
use)
The phone sends your settings to the network
and the network’s acknowledgement displays.
Activating the Call Waiting Feature
You can also deactivate all call barring options by
selecting the Cancel all option.
1. Select the type of calls to which the call waiting
option is to be applied by pressing the Up or
Down key and then press the Select soft key.
Changing the Barring Password
2. Press the Activate soft key to confirm your
You can set and change the call barring password
obtained from your service provider.
settings.
The phone sends your settings to the network
and the network’s acknowledgement displays.
1. Select Change barring password from the
Call barring screen, and press the Select soft
key.
Deactivating Specific Call Waiting
Options
2. Enter the current password and press the Ok
soft key.
1. Select the type of call to which the option
applies.
3. Enter a new password and press the Ok soft
key.
2. Press the Deactivate soft key.
4. Enter the new password again to confirm it and
The phone sends your settings to the network
and the network’s acknowledgement displays.
press the Ok soft key.
You can also deactivate all call waiting options by
selecting the Cancel all option.
128
129
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Services
Network Services
Network Selection (Menu 6.4)
Caller ID (Menu 6.5)
You can prevent your phone number from being
displayed on the phone of the person being called.
The Network Selection feature enables you to
automatically or manually select the network used
when roaming outside your home area.
Note: Some networks do not allow the user to change
this setting.
Note: You can select a network other than your home
network only if it has a valid roaming
The following options are available:
agreement with your home network.
Default: the default setting provided by the
network is used.
To indicate to automatically or manually select the
network when roaming:
Hide number: your number does not display on
the other person’s phone.
1. Press the Up or Down key until the appropriate
option highlights and press the Select soft key.
Send number: your number is sent each time you
make a call.
If you select Automatic, you are connected to
the first available network when roaming.
If you select Manual, the phone scans for the
available networks. Go to Step 2.
Active Line (Menu 6.6)
2. Press the Up or Down key until the preferred
network highlights and press the Select soft
key.
Some SIM cards may be used with two subscriber
numbers. This function is available only if your SIM
card supports it.
You are connected to that network when
roaming.
This menu option allows you to select the line to be
used to make calls. However, calls can be answered
on both lines, regardless of the selected line.
130
131
Download from Www.Somanuals.com. All Manuals Search And Download.
Fun Box
Fun Box
The Fun box menu contains several fun options:
To scroll through the screen, use the Up and Down
keys.
• WWW services
• Media box
To exit the browser, press the
The phone returns to Idle mode.
key at any time.
• JAVA world
Navigating the WAP Browser
To
Press the
WWW Services (Menu 7.1)
scroll through and Up or Down key until the item
select browser
items
Your phone comes equipped with a WAP (Wireless
Application Protocol) Browser, making it possible for
you to access the Wireless Web.
you want highlights, and then
press the soft key.
select a numbered corresponding numeric key.
item
Each time you start the WAP Browser, the phone
connects to the Wireless Web and the service
return to the
previous page
(or Back) soft key or C
key.
indicator icon (
or
) appears on the display to
inform you that you are connected to the Wireless
Web and will be billed accordingly. Rates vary
according to your service option.
return to the
startup homepage browser option. For details,
see page 133.
key and select the Home
The WAP Browser ends the network connection
after a certain period of inactivity and automatically
reconnects as necessary. For this reason, you may
find that you are billed for several network
connections within a single session. This is normal
and is designed to minimise your bill.
Entering Text in the WAP Browser
When you are prompted to enter text, the current
text input mode appears above the right soft key.
For further information on how to enter text, see
page 37.
Home (Menu 7.1.1)
When you select this menu option, the phone
connects to the network and loads the homepage of
the Wireless Web service provider.
Using the WAP Browser Menus
There are various menu options available when
surfing the Wireless Web.
Once connected, the homepage displays. The
content depends on the service provider.
To access the WAP Browser menu:
1. Press the
key or scroll to the logo on the top
Note: To quickly launch the WAP browser from Idle
left of all Web pages and then press the ( ) soft
key. A list of options appears.
mode, press the
key.
132
133
Download from Www.Somanuals.com. All Manuals Search And Download.
Fun Box
Fun Box
2. Highlight the required option using the Up or
Down key.
Messages: allows you to read or write an SMS
message. For details, see page 66.
Media box: allows you to use your Media box. For
details, see page 138.
3. Press the
soft key to select the option.
4. If necessary, select the secondary option by
pressing the Up or Down key and then press the
soft key.
Answering a Call During a WAP Connection
You can receive an incoming call while you are
navigating the WAP browser.
Note: The WAP Browser menus may vary,
depending on your version of the browser.
Answer the call by pressing the
key, as you
The following options are available:
normally would. After ending the call, you can
continue navigating on the Web page you
previously were accessed.
Back: returns to the previous page.
Home: takes you back at any time to the
homepage of the Wireless Web service provider.
Bookmark (Menu 7.1.2)
Exit: exits the WAP browser.
This menu option allows you to store the URL
addresses of up to 10 of your favourite Web sites.
Reload: reloads the current page.
Show URL: shows the URL address of the Web
page you are currently accessed.
To store a URL address:
1. Select an empty location and press the Select
Advanced: the following options are available:
soft key.
Clear Cache: clears the information stored in the
cache, the phone’s temporary memory used to
store the most recently accessed Web pages.
2. Enter the name of the bookmark and press the
Ok soft key.
For further information about how to enter text,
see page 37.
About...: shows browser information.
Using the WAP Browser Options
3. Enter the address and press the Ok soft key to
Several options are available when you are surfing
the Wireless Web. To access these options, press
save it.
Once you have stored an address, the following
options are available when you select it.
the
key once connected to the Wireless Web.
Goto URL: allows you to manually enter the URL
address of the site that you wish to access.
Go: allows you to access the site directly.
Edit: allows you to change the name and URL
address of the bookmark.
Bookmark: allows you to use the Bookmark
menu option. For details, see page 135.
Delete: allows you to delete the bookmark.
Download from Www.Somanuals.com. All Manuals Search And Download.
134
135
Fun Box
Fun Box
Login ID: enter the PPP server login ID.
Password: enter the PPP server password.
Go to URL (Menu 7.1.3)
This menu option allows you to manually enter the
URL address of the Web site that you wish to
access.
GPRS setting: you can change the proxy settings
for the GPRS network.
Enter the URL address and press the Ok soft key.
Gateway: enter the IP Address and IP Port.
For further information about how to enter text, see
page 37.
APN: enter the access point name used for the
address of the GPRS network gateway.
Login ID: enter the user ID required to connect to
the GPRS network.
Clear Cache (Menu 7.1.4)
Password: enter the password required to connect
to the GPRS network.
This menu option allows you to clear the
information stored in the cache, the phone’s
temporary memory used to store the most recently
accessed Web pages.
Home URL: You can change the address of your
startup homepage.
When the default homepage displays, you can
delete it using the C key and enter your own choice.
To enter any special characters, / for example, use
the Symbolic mode; see page 47.
Proxy Settings (Menu 7.1.5)
This menu option allows you to set up five proxy
servers.
Bearer: You can select the bearer to be used for
each type of network accesses.
Note: You do not need to change the browser settings
in most cases. Change the settings only when
your network provider asks you to.
GPRS first: your phone will search for the GPRS
network first. If this service is not available, you
can set the GSM service temporarily.
For each proxy, the following options are available:
Proxy name: enter the name of the HTTP proxy
server.
GPRS only: the phone only works in GPRS
networks.
GSM setting: you can change the proxy settings
for the GSM network.
GSM only: the phone only works in GSM networks.
Gateway: enter the IP Address and IP Port
Current Proxy (Menu 7.1.6)
Data call type: select a network connection type;
ISDN or Analogue.
This menu option allows you to activate one of the
proxies you set up to use the WAP connection.
Dial number: enter the PPP server phone number.
136
137
Download from Www.Somanuals.com. All Manuals Search And Download.
Fun Box
Fun Box
Send: allows you to send it via a message.
Rename: allows you to rename it.
Delete: allows you to delete it.
Push Messages (Menu 7.1.7)
This menu allows you to set to be received and read
push messages.
The following options are available:
Set as wallpaper: allows you to set it as a
wallpaper.
Inbox: Your phone receives push messages and
saves them in Inbox. And you can read push
messages in Inbox.
Properties: allows you to view the detail
information of the photo.
Setting: This option allows you to set the push
message receiving options.
Sounds (Menu 7.2.2)
Always: push messages always comes in.
Never: push messages never comes in.
This option allows you to listen to the recorded
voices and the melodies received from other
sources, such as the WAP sites or multimedia
messages.
Optional: Only the push messages whose setting
matches to the number in his option come in. The
preset number is SMS service centre. You can also
edit the number.
Voices: allow you to listen to the recorded voices.
My sounds: allow you to listen to various melodies.
Delete all: deletes all of the push messages.
When you select a sound, press the Options soft
key to send, rename, delete, set as a ringtone or
view the properties.
Media Box (Menu 7.2)
For further details about these options, see the
options of the Images menu (Menu 7.3.1).
This menu option stores various media items from
other sources, such as the wireless web or
multimedia messages.
Delete All (Menu 7.2.3)
This option deletes all of the images and sounds in
the Media box.
Images (Menu 7.2.1)
Images: Press the Yes soft key to delete it,
otherwise press the No soft key.
This option allows you to view the images extracted
from EMS or MMS, downloaded from WAP or
EasyStudio PC soft ware.
Sounds:
To view an image, press the View soft key.
1. Scroll to a sound box and place a check mark
ahead it by pressing the Select soft key.
When you view a photo, press the Options soft key
to do the followings:
Selecting All places check marks on all of the
boxes.
138
139
Download from Www.Somanuals.com. All Manuals Search And Download.
Fun Box
Fun Box
2. If necessary, repeat step 1 to check another
box.
MIDets to the list, you can download MIDlets from
the WAP sites.
3. When you have finished checking, press the Ok
To
Press the
soft key.
find a game
run a game
Up or Down key.
Launch soft key.
Info soft key.
4. When a confirming message appears, press the
Yes soft key to delete all of the sounds in the
box(es).
view detail
information
Otherwise, press the No soft key.
delete the game
Delete soft key in the
information display.
Memory Status (Menu 7.2.4)
Media box and multimedia message boxes share a
given amount of memory in your phone.
SnowBallFight
The display shows the status of free and used
memory.
The goal of this game is to challenge and defeat the
snowball fight champions of four different teams.
You can see the used memory status of Media box
and multimedia message boxes by pressing the Left
or Right key.
Accessing a game
After loading the game, press any key twice to go
to the first menu screen. At the first menu screen,
press
key to play a game, or press
key to
access the main menu of this game.
JAVA World (Menu 7.3)
Play: allows you to start a new game or a saved
game. Saved game allows you to continue the
beginning of last stage you played.
You can download MIDlets (Java applications
running on mobile phones) from various sources
using the WAP Browser and store them in your
phone.
Instructions: shows you the explanation of control
keys, offense items and defense items.
Configuration: allows you to turn the sound,
vibration on or off and select the game speed from
1 to 5.
Downloads (Menu 7.3.1)
A list of Java games is displayed. In basic, two pre-
loaded MIDlets (Java games) are provided. If the
list of Java games is empty, a pop up message is
displayed to invite to download a new game. To add
Quit: quits the game and returns to the downloads
menu screen.
140
141
Download from Www.Somanuals.com. All Manuals Search And Download.
Fun Box
Fun Box
BubbleSmile
Playing a game
BubbleSmile is a arcade puzzle game.
Move the character along the street using the
navigation key. If you have enough gold coins which
you can earn while fighting to buy items, you can
buy defense items at the drug store and offense
items at the item shop. Move the character to the
Accessing a game
After loading the game, you will see the following
options, press key to select one of them:
team of current stage and press
key to select it.
When the snowball fight game starts, hit the rival
kids with snowballs and avoid theirs. While fighting
you can use items you have. If you raise enough
mana, you can also use special attack. You should
win all fights in four stages in order to challenge the
champions of the snowball fight.
Start game: allows you to start a new game with
timed mode or skilled mode.
• Timed mode: you have to achieve the best score
before gauge disappear at the time bar. When
you get the same coloured bubble together,
gauge at the time bar increases.
Key Commands
• Skilled mode: you have to make more than 4
bubbles disappear at once for the gauge at the
skill bar increase. If 3 or none of bubbles
disappear, then the gauge decreases.
4/6 or Left/Right: move left or right
2, 5 or Up, :control the distance at the first press
and throw the snowball at the next press.
Continue: allows you to continue the last game
you played. The menu is only available when a
game has already been played.
8 or Down: use the special attack depending on
your mana.
3: enters item mode to use your item, select the
item you want to use by pressing 2, 5, Up or key.
High score: shows you the high score table.
How to play: shows you the instruction of this
game.
Special attacks
Option: allows you to set the sound on or off
Level 1: Aurora, all enemies are hit by a snowball.
Level 2: Ice dragon, all enemies are hit by a
snowball and frozen for 8 seconds.
Playing a game
Your score goes up when you remove the bubbles.
Only when more than 3 same coloured bubbles line
up horizontally or diagonally, they disappear. To line
up the bubbles, move the band rounding three
bubbles to suitable place and rotate it. When the
game is over, your score is ranked on the high score
board if it is within third.
Level 3: Icicle storm, double powered snowball
attack to all enemies and decreasing enemies’
attack accuracy for 10 seconds.
142
143
Download from Www.Somanuals.com. All Manuals Search And Download.
Fun Box
Using ALS (Alternate
Line Service)
The ALS feature enables two lines to be associated
with one SIM card. Consequently, you can make
and receive calls on either line. If you subscribe to
this network service, a few additional menu options
enable you to set up this feature.
Key Commands
2, 4, 6, 8, or navigation key: move the band up,
down, left or right
1: rotate the bubbles in the band counterclockwise
3: rotate the bubbles in the band clockwise
DNS Setting (Menu 7.3.2)
Note: Please contact your service provider to check
the availability of this feature and how to
subscribe to ALS.
The DNS (Domain Name Server) address to connect
the Java server is automatically set when making
data call set up. The address is provided by the
network operator automatically, but you can change
it manually at this menu.
Selecting a Line
You can select a line for each call via the Active
line menu option (Menu 6.6). For further details,
refer to page 131.
Memory Status (Menu 7.3.3)
You can check the free space for Java download.
The display also shows the total memory and used
memory.
Editing the Line Name
You can edit the name of each line via the Own
number menu option.
When you edit the name of a line, this name
replaces “Line 1” or “Line 2”, as applicable. For
further details, refer to page 63.
Setting the Ring Type
To distinguish between incoming calls on the two
lines, you can select a different ring tone for each
line via the Incoming calls menu option (Menu
3.1). See page 95 for further details.
144
145
Download from Www.Somanuals.com. All Manuals Search And Download.
Using ALS (Alternate Line Service)
Solving Problems
Setting Call Diverting Options
Before contacting the after-sales service, perform
the following simple checks. They may save you the
time and expense of an unnecessary service call.
You can set up call diverting via the Call diverting
menu option (Menu 6.1). This service reroutes
incoming calls on the line of your choice to a
specified number. For further details, see page 124.
When you switch your phone on, the
following messages may appear
Viewing Call Information
No SIM card
You can view call times and last call cost
information for each line. For further details, see
page 93.
Check that the SIM card is correctly installed.
Phone locked Enter password
The Phone lock feature is enabled. You must enter
the phone’s password before you can use the
phone.
Enter PIN
• You are using your phone for the first time. You
must enter the Personal Identification Number
supplied with the SIM card.
• The PIN check feature is enabled. Every time the
phone is switched on, you must enter the PIN. To
disable this feature, use the PIN check menu
option (Menu 4.5.1). See page 104.
Enter PUK
The PIN was entered wrongly three times in
succession and the phone is now blocked. Enter the
PUK supplied by your network operator.
146
147
Download from Www.Somanuals.com. All Manuals Search And Download.
Solving Problems
Solving Problems
“No service” displays
The phone starts beeping and “Battery
Low” flashes on the display
• The network connection was lost. You may be in a
weak reception area (in a tunnel or surrounded
by buildings). Move and try again.
The battery is insufficiently charged. Replace the
battery and recharge it.
• You are trying to access an option for which you
have not taken out a subscription with your
service provider. Contact the service provider for
further details.
The audio quality of the call is poor
• Check the signal strength indicator on the display
(
); the number of bars indicates the signal
strength from strong ( ) to weak ( ).
• Try moving the phone slightly or moving closer to
a window if you are in a building.
You have entered a number but it was
not dialled
• Have you pressed the
key?
• Are you accessing the right cellular network?
• You may have set an outgoing call barring option.
No number is dialled when you recall a
Phonebook entry
• Check that the number has been stored correctly,
by using the Phonebook Search feature.
• Re-store them, if necessary.
Your correspondent cannot reach you
• Is your phone switched on (the
for more than one second)?
key pressed
• Are you accessing the right cellular network?
• You may have set an incoming call barring option.
If the above guidelines do not help you to solve
the problem, take a note of:
• the model and serial numbers of your phone
• your warranty details
• a clear description of the problem
Your correspondent cannot hear you
speaking
Then contact your local dealer or Samsung
after-sales service.
• Have you switched off the microphone (Mute
appears)?
• Are you holding the phone close enough to your
mouth? The microphone is located at the bottom
of the phone.
148
149
Download from Www.Somanuals.com. All Manuals Search And Download.
Access Codes
Access Codes
There are several access codes that are used by
your phone and its SIM card. These codes help you
protect the phone against unauthorised use.
PIN2
The PIN2, supplied with some SIM cards, is required
to access some functions, such as charging unit
counters. These functions are only available if
supported by your SIM card.
Some access codes can be changed using the
Security menu option (Menu 4.5). See page 104
for further details.
If you key in an incorrect PIN2 three times in
succession, key in the PUK2 and press the Ok soft
key to unlock the phone. Key in a new PIN2 and
press the Ok soft key. Key in the new PIN2 again
and press the Ok soft key.
Phone Password
The Phone lock feature (see page 105) uses the
phone password to protect your phone against
unauthorised use.
PUK
The phone password is supplied with the phone and
is preset to “00000000” at the factory. To change
the password, use the Change password menu
option (Menu 4.5.4). See page 105.
The PUK (PIN Unblocking Key) is required to change
a blocked PIN. The PUK may be supplied with the
SIM card. If not, contact your local service provider.
If you key in an incorrect PUK ten times in
succession, the SIM card cannot be used anymore.
Contact your service provider for a new card.
PIN
You cannot change the PUK. If you lose the code,
contact your service provider.
The PIN (Personal Identification Number) protects
your SIM card against unauthorised use. It is
usually supplied with the SIM card. When the PIN
Check feature is enabled (see page 104), you must
enter the PIN each time you switch on the phone.
If you key in an incorrect PIN three times in
succession, key in the PUK and press the Ok soft
key to unlock the phone. Key in a new PIN and
press the Ok soft key. Key in the new PIN again and
press the Ok soft key.
150
151
Download from Www.Somanuals.com. All Manuals Search And Download.
Access Codes
Health and Safety
Information
PUK2
The PUK2, supplied with some SIM cards, is
required to change a blocked PIN2.
Exposure to Radio-Frequency Energy
(SAR Information)
If you key in an incorrect PUK2 ten times in
succession, you cannot use the functions requiring
the PIN2. Contact your service provider for a new
card.
This phone meets European Union (EU)
requirements concerning exposure to radio waves.
You cannot change the PUK2. If you lose the code,
contact your service provider.
Your mobile phone is a radio transmitter and
receiver. It is designed and manufactured, so as not
to exceed the limits for exposure to radio-frequency
(RF) energy, as recommended by the EU Council.
These limits are part of comprehensive guidelines
and establish permitted levels of RF energy for the
general population. The guidelines were developed
by independent scientific organisations through the
periodic and thorough evaluation of scientific
studies. The limits include a substantial safety
margin designed to ensure the safety of all persons,
regardless of age and health.
Call Barring Password
The 4-digit call barring password is required when
you use the Call Barring function. You obtain the
password from your service provider when you
subscribe to this function.
You can change this password using the Call
barring menu option (Menu 6.2). For further
details, see page 128.
The exposure standard for mobile phones employs
a unit of measurement known as SAR (Specific
Absorption Rate). The SAR limit recommended by
*
the EU Council is 2.0W/kg.
* The SAR limit for mobile phones used by the public is
2.0 watts/kilogram (W/kg) averaged over ten grams of
body tissue. The limit incorporates a substantial margin
of safety to give additional protection for the public and
to account for any variations in measurements. The SAR
values may vary depending on national reporting
requirements and the network band.
152
153
Download from Www.Somanuals.com. All Manuals Search And Download.
Health and Safety Information
Health and Safety Information
SAR tests are conducted using standard operating
positions with the phone transmitting at its highest
certified power level in all tested frequency bands.
Although the SAR is determined at the highest
certified power level, the actual SAR level of the
phone while operating can be well below the
maximum value. This is because the phone is
designed to operate at multiple power levels so as
to use only the power required to reach the
• If left unused, a fully charged battery will
discharge itself over time.
• Use only Samsung-approved batteries and
recharge your battery only with Samsung-
approved chargers. When a charger is not in use,
disconnect it from the power source. Do not leave
the battery connected to a charger for more than
a week, since overcharging may shorten its life.
network. In general, the closer you are to a base
station, the lower the power output of the phone.
• Extreme temperatures will affect the charging
capacity of your battery: it may require cooling or
warming first.
The highest SAR value for this model phone when
tested for compliance against the standard was
0.845W/kg. While there may be differences
between the SAR levels of various phones and
various positions, they all meet the EU
• Do not leave the battery in hot or cold places,
such as in a car in summer or winter conditions,
as you will reduce the capacity and lifetime of the
battery. Always try to keep the battery at room
temperature. A phone with a hot or cold battery
may temporarily not work, even when the battery
is fully charged. Li-ion batteries are particularly
affected by temperatures below 0 °C (32 °F).
requirements for RF exposure.
Precautions When Using Batteries
• Do not short-circuit the battery. Accidental short-
circuiting can occur when a metallic object (coin,
clip or pen) causes a direct connection between
the + and – terminals of the battery (metal strips
on the battery), for example when you carry a
spare battery in a pocket or bag. Short-circuiting
the terminals may damage the battery or the
object causing the short-circuiting.
• Never use any charger or battery that is
damaged in any way.
• Use the battery only for its intended purpose.
• If you use the phone near the network’s base
station, it uses less power; talk and standby time
are greatly affected by the signal strength on the
cellular network and the parameters set by the
network operator.
• Dispose of used batteries in accordance with local
regulations. Always recycle. Do not dispose of
batteries in a fire.
• Battery charging time depends on the remaining
battery charge and the type of battery and
charger used. The battery can be charged and
discharged hundreds of times, but it will
gradually wear out. When the operation time
(talk time and standby time) is noticeably shorter
than normal, it is time to buy a new battery.
154
155
Download from Www.Somanuals.com. All Manuals Search And Download.
Health and Safety Information
Health and Safety Information
attention away from your primary responsibility,
driving safely.
Road Safety
Your wireless phone gives you the powerful ability
to communicate by voice, almost anywhere,
anytime. But an important responsibility
accompanies the benefits of wireless phones, one
that every user must uphold.
6. Dial sensibly and assess the traffic; if possible,
place calls when you are not moving or before
pulling into traffic. Try to plan calls when your
car will be stationary. If you need to make a call
while moving, dial only a few numbers, check
the road and your mirrors, then continue.
When driving a car, driving is your first
responsibility. When using your wireless phone
behind the wheel of a car, practice good common
sense and remember the following tips.
7. Do not engage in stressful or emotional
conversations that may be distracting. Make the
people with whom you are talking aware that
you are driving and suspend conversations that
have the potential to divert your attention from
the road.
1. Get to know your wireless phone and its
features, such as speed dial and redial. If
available, these features help you to place your
call without taking your attention off the road.
8. Use your wireless phone to call for help. Dial the
emergency number in the case of fire, traffic
accident or medical emergencies. Remember, it
is a free call on your wireless phone!
2. When available, use a hands-free device. If
possible, add an extra layer of convenience and
safety to your wireless phone with one of the
many hands-free accessories available today.
9. Use your wireless phone to help others in
emergencies. If you see a car accident, crime in
progress or other serious emergency where lives
are in danger, call the emergency number, as
you would want others to do for you.
3. Position your wireless phone within easy reach.
Be able to access your wireless phone without
removing your eyes from the road. If you get an
incoming call at an inconvenient time, let your
voice mail answer it for you.
10.Call roadside assistance or a special non-
emergency wireless assistance number when
necessary. If you see a broken-down vehicle
posing no serious hazard, a broken traffic signal,
a minor traffic accident where no one appears
injured, or a vehicle you know to be stolen, call
roadside assistance or any other special non-
emergency wireless number.
4. Let the person you are speaking with know you
are driving; if necessary, suspend the call in
heavy traffic or hazardous weather conditions.
Rain, sleet, snow, ice and even heavy traffic can
be hazardous.
5. Do not take notes or look up phone numbers
while driving. Jotting down a To Do list or
flipping through your Phonebook takes your
156
157
Download from Www.Somanuals.com. All Manuals Search And Download.
Health and Safety Information
Health and Safety Information
Persons with pacemakers:
Operating Environment
• should always keep the phone more than 15 cm
(6 inches) from their pacemaker when the phone
is switched on
Remember to follow any special regulations in force
in any area and always switch off your phone
whenever it is forbidden to use it, or when it may
cause interference or danger.
• should not carry the phone in a breast pocket
• should use the ear opposite the pacemaker to
minimise potential interference
When connecting the phone or any accessory to
another device, read its user’s guide for detailed
safety instructions. Do not connect incompatible
products.
If you have any reason to suspect that interference
is taking place, switch off your phone immediately.
As with other mobile radio transmitting equipment,
users are advised that for the satisfactory operation
of the equipment and for the safety of personnel, it
is recommended that the equipment should only be
used in the normal operating position (held to your
ear with the antenna pointing over your shoulder).
Hearing Aids
Some digital wireless phones may interfere with
some hearing aids. In the event of such
interference, you may wish to consult your hearing
aid manufacturer to discuss alternatives.
Other Medical Devices
Electronic Devices
If you use any other personal medical devices,
consult the manufacturer of your device to
Most modern electronic equipment is shielded from
radio frequency (RF) signals. However, certain
electronic equipment may not be shielded against
the RF signals from your wireless phone. Consult
the manufacturer to discuss alternatives.
determine if it is adequately shielded from external
RF energy. Your physician may be able to assist you
in obtaining this information. Switch off your phone
in health care facilities when any regulations posted
in these areas instruct you to do so. Hospitals or
health care facilities may be using equipment that
could be sensitive to external RF energy.
Pacemakers
Pacemaker manufacturers recommend that a
minimum distance of 15 cm (6 inches) be
maintained between a wireless phone and a
pacemaker to avoid potential interference with the
pacemaker. These recommendations are consistent
with the independent research and
recommendations of Wireless Technology Research.
158
159
Download from Www.Somanuals.com. All Manuals Search And Download.
Health and Safety Information
Vehicles
Health and Safety Information
Emergency Calls
RF signals may affect improperly installed or
inadequately shielded electronic systems in motor
vehicles. Check with the manufacturer or its
representative regarding your vehicle.
This phone, like any wireless phone, operates using
radio signals, wireless and landline networks as well
as user-programmed functions, which cannot
guarantee connection in all conditions. Therefore,
you should never rely solely on any wireless phone
for essential communications (medical
You should also consult the manufacturer of any
equipment that has been added to your vehicle.
emergencies, for example).
Posted Facilities
Remember, to make or receive any calls the phone
must be switched on and in a service area with
adequate signal strength. Emergency calls may not
be possible on all wireless phone networks or when
certain network services and/or phone features are
in use. Check with local service providers.
Switch off your phone in any facility where posted
notices require you to do so.
Potentially Explosive Atmospheres
To make an emergency call, proceed as follows.
1. If the phone is not on, switch it on.
Switch off your phone when in any area with a
potentially explosive atmosphere and obey all signs
and instructions. Sparks in such areas could cause
an explosion or fire resulting in bodily injury or even
death.
2. Key in the emergency number for your present
location (for example, 112 or any other official
emergency number). Emergency numbers vary
by location.
Users are advised to switch off the phone while at a
refuelling point (service station). Users are
reminded of the need to observe restrictions on the
use of radio equipment in fuel depots (fuel storage
and distribution areas), chemical plants or where
blasting operations are in progress.
3. Press the
key.
If certain features are in use (call barring, for
example), you may first need to deactivate those
features before you can make an emergency call.
Consult this document and your local cellular
service provider.
Areas with a potentially explosive atmosphere are
often but not always clearly marked. They include
below deck on boats, chemical transfer or storage
facilities, vehicles using liquefied petroleum gas
(such as propane or butane), areas where the air
contains chemicals or particles, such as grain, dust
or metal powders, and any other area where you
would normally be advised to turn off your vehicle
engine.
When making an emergency call, remember to give
all the necessary information as accurately as
possible. Remember that your phone may be the
only means of communication at the scene of an
accident; do not cut off the call until given
permission to do so.
160
161
Download from Www.Somanuals.com. All Manuals Search And Download.
Health and Safety Information
Health and Safety Information
• Do not touch the phone with a wet hand while it
is charging. Doing so may cause an electric shock
to you or damage to the phone.
Other Important Safety Information
• Only qualified personnel should service the phone
or install the phone in a vehicle. Faulty
installation or service may be dangerous and may
invalidate any warranty applicable to the device.
• Do not use or store the phone in dusty, dirty
areas, as its moving parts may be damaged.
• Do not store the phone in hot areas. High
temperatures can shorten the life of electronic
devices, damage batteries, and warp or melt
certain plastics.
• Check regularly that all wireless phone
equipment in your vehicle is mounted and
operating properly.
• Do not store or carry flammable liquids, gases or
explosive materials in the same compartment as
the phone, its parts or accessories.
• Do not store the phone in cold areas. When the
phone warms up to its normal operating
temperature, moisture can form inside the
phone, which may damage the phone’s electronic
circuit boards.
• For vehicles equipped with an air bag, remember
that an air bag inflates with great force. Do not
place objects, including both installed or portable
wireless equipment in the area over the air bag or
in the air bag deployment area. If wireless
equipment is improperly installed and the air bag
inflates, serious injury could result.
• Do not drop, knock or shake the phone. Rough
handling can break internal circuit boards.
• Do not use harsh chemicals, cleaning solvents or
strong detergents to clean the phone. Wipe it
with a soft cloth slightly dampened in a mild
soap-and-water solution.
• Switch off your phone before boarding an aircraft.
The use of wireless phones in aircraft may be
dangerous to the operation of the aircraft, and is
illegal.
• Do not paint the phone. Paint can clog the
device’s moving parts and prevent proper
operation.
• Failure to observe these instructions may lead to
the suspension or denial of telephone services to
the offender, or legal action, or both.
• Do not put the phone in or on heating devices,
such as a microwave oven, a stove or a radiator.
The phone may explode when overheated.
• Use only the supplied or an approved
Care and Maintenance
replacement antenna. Unauthorised antennas or
modified accessories may damage the phone and
violate regulations governing radio devices.
• Keep the phone and all its parts and accessories
out of the reach of small children’s.
• If the phone, battery, charger or any accessory is
not working properly, take it to your nearest
qualified service facility. The personnel there will
assist you, and if necessary, arrange for service.
• Keep the phone dry. Precipitation, humidity and
liquids contain minerals that will corrode
electronic circuits.
162
163
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
Glossary
GPRS (General Packet Radio Service)
To help you understand the main technical terms
and abbreviations used in this booklet and take full
advantage of the features of your mobile phone,
here are a few definitions.
New non-voice value-added service that allows
information to be sent and received across a mobile
telephone network. GPRS guaranties continuous
connection to the Internet for mobile phone and
computer users. It is based on the Global System
for Mobile Communication (GSM) circuit-switched
cellular phone connections and the Short Message
Service (SMS).
ALS (Alternate Line Service)
Capability of associating two lines with one SIM
card. With this service, you can make and receive
calls on either line, as required.
GSM
Call Barring
(Global System for Mobile Communication)
Ability to restrict outgoing and incoming calls.
Call Diverting
International standard for cellular communication,
guaranteeing compatibility between the various
network operators. GSM covers most European
countries and many other parts of the world.
Ability to reroute calls to another number.
Call Holding
Multiparty Calling
Ability to put one call on standby while answering or
making another call; you can then switch between
the two calls, as required.
Ability to establish a conference call involving up to
five additional parties.
Call Waiting
PIN (Personal Identification Number)
Ability to inform users that they have an incoming
call when engaged on another call.
Security code that protects the phone/SIM against
unauthorised use. The PIN is supplied by the
service provider with the SIM card. It may be a four
to eight-digit number and can be changed, as
required.
CLI (Caller Line Identification) Services
Services allowing subscribers to view or block the
telephone numbers of callers.
PUK (PIN Unblocking Key)
EMS (Enhanced Message Service)
Security code used to unlock the phone when an
incorrect PIN has been entered three times in
succession. The eight-digit number is supplied by
the service provider with the SIM card.
Network service sending and receiving messages
that include images, sounds and animations to and
from another user without having to speak to the
correspondent.
164
165
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
Roaming
Use of your phone when you are outside your home
area (when travelling for example).
SIM (Subscriber Identification Module)
Card containing a chip with all the information
required to operate the phone (network and
memory information, as well as the subscriber’s
personal data). The SIM card fits into a small slot
on the back of the phone and is protected by the
battery.
SMS (Short Message Service)
Network service sending and receiving messages to
and from another subscriber without having to
speak to the correspondent. The message created
or received can be displayed, received, edited or
sent.
Soft Keys
Two keys marked
purpose of which:
and
on the phone, the
• varies according to the function that you are
currently using
• is indicated on the bottom line of the display just
above the corresponding key
Voice Mail
Computerised answering service that automatically
answers your calls when you are not available,
plays a greeting (optionally in your own voice) and
records a message.
166
Download from Www.Somanuals.com. All Manuals Search And Download.
167
Download from Www.Somanuals.com. All Manuals Search And Download.
168
Download from Www.Somanuals.com. All Manuals Search And Download.
|