Samsung Speaker System HWF450 User Guide

HW-F450  
Crystal Surround Air Track  
(Active Speaker System)  
user manual  
imagine the possibilities  
Thank you for purchasing this Samsung product.  
To receive more complete service,  
please register your product at  
Download from Www.Somanuals.com. All Manuals Search And Download.  
safety information  
safety Warnings  
tO reDUce tHe risK Of eLectric sHOcK, DO nOt reMOVe tHe cOVer(Or BacK). nO User-serViceaBLe Parts are insiDe. refer  
serVicing tO QUaLifieD serVice PersOnneL.  
CAUTION  
RISK OF ELECTRIC SHOCK  
DO NOT OPEN  
The lighting flash and Arrowhead within the  
triangle are warning signs alerting you to  
dangerous voltage Inside the product  
caUtiOn: TO REDUCE THE RISK OF  
ELECTRIC SHOCK, DO NOT REMOVE THE  
COVER (OR BACK). NO USER SERVICEABLE instructions accompanying the product.  
PARTS INSIDE.  
The exclamation point within the triangle is a  
warning sign alerting you to important  
REFER SERVICING TO QUALIFIED SERVICE  
PERSONNEL.  
WARNING  
To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.  
To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions.  
CAUTION  
Do not expose this apparatus to dripping or splashing. Do not put objects filled with liquids, such as vases on the apparatus.  
To turn this apparatus off completely, you must pull the power plug out of the wall socket. Consequently, the power plug must be easily and readily  
accessible at all times.  
This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other equipment. To prevent  
electromagnetic interference with electric appliances, such as radios and televisions, use shielded cables and connectors for connections.  
FCC NOTE (for U.S.A):  
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits  
are designed to provide reasonable protection against harmful interference in a residential installation.  
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause  
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.  
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the  
user is encouraged to try to correct the interference by one or more of the following measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment to an outlet that is on a different circuit than the radio or TV.  
Consult the dealer or an experienced radio/TV technician for help.  
Caution : FCC regulations state that any unauthorized changes or modifications to this equipment may void the user's authority to operate it.  
Important Safety Instructions  
Read these operating instructions carefully before using the unit. Follow all the safety instructions listed below. Keep these operating instructions handy for  
future reference.  
1) Read these instructions.  
2) Keep these Instructions.  
3) Heed all warnings.  
10) Protect the power cord from being walked on or pinched  
particularly at plugs, convenience receptacles, and the point where  
they exit from the apparatus.  
11) Only use attachment/accessories  
specified by the manufacturer.  
4) Follow all instructions.  
5) Do not use this apparatus near water.  
6) Clean only with dry cloth.  
7) Do not block any ventilation openings. Install in  
accordance with the manufacturer's instructions.  
8) Do not install near any heat sources such as  
radiators, heat registers, stoves, or other apparatus (including  
amplifiers) that produce heat.  
12) Use only with the cart, stand, tripod,  
bracket, or table specified by the  
manufacturer, or sold with the apparatus.  
When a cart is used, use caution when  
moving the cart/apparatus combination to  
avoid injury from tip-over.  
13) Unplug this apparatus during lightning storms or when unused for  
long periods of time.  
9) Do not defeat the safety purpose of the polarized or grounding-type  
plug. A polarized plug has two blades with one wider than the other.  
A grounding type plug has two blades and a third grounding prong.  
The wide blade or the third prong are provided for your safety. If the  
provided plug does not fit into your outlet, consult an electrician for  
replacement of the obsolete outlet.  
14) Refer all servicing to qualified service personnel. Servicing is  
required when the apparatus has been damaged in any way, such  
as when the power-supply cord or plug is damaged, liquid has  
been spilled or objects have fallen into the apparatus, the  
apparatus has been exposed to rain or moisture, does not operate  
normally, or has been dropped.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
PrecaUtiOns  
2.7 inch  
3.9 inch  
3.9 inch  
3.9 inch  
Ensure that the AC power supply in your house complies with the power requirements listed on the identification sticker located on the  
back of your product. Install your product horizontally, on a suitable base (furniture), with enough space around it for ventilation (3~4 inch-  
es). Make sure the ventilation slots are not covered. Do not place the unit on amplifiers or other equipment which may become hot. This  
unit is designed for continuous use. To fully turn off the unit, disconnect the AC plug from the wall outlet. Unplug the unit if you intend to  
leave it unused for a long period of time.  
During thunderstorms, disconnect the AC plug from the  
wall outlet. Voltage peaks due to lightning could damage the unit.  
Do not expose the unit to direct sunlight or other heat sources.  
This could lead to overheating and cause the unit to malfunction.  
Phones  
The batteries used with this product contain chemicals that are harmful to  
the environment.  
Do not dispose of batteries in the general household trash.  
Protect the product from moisture (i.e. vases) , and excess heat (e.g.  
a fireplace) or equipment creating strong magnetic or electric fields  
Disconnect the power cable from the AC supply if the unit malfunctions.  
Your product is not intended for industrial use. This product is for per-  
sonal use only.  
Condensation may occur if your product has been stored in cold tem-  
peratures. If transporting the unit during the winter, wait approximately 2  
hours until the unit has reached room temperature before using.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
contents  
2
2
Features  
License  
FeAtU2ReS  
3
4
Safety warnings  
Precautions  
SAFety INFORMAtION  
3
6
6
Before reading the User’s manual  
What’s included  
gettINg StAR6teD  
7
Front/Rear Panel  
DeSCRIPtIONS  
7
8
9
Tour of the remote control  
Installing the wall mount  
ReMOte CONtROL  
8
CONNeCtIONS  
10 Connecting the Wireless Subwoofer  
11 Attaching the Toroidal Ferrite Core to the  
Power Cord of the Subwoofer  
11 Looping the Power Cable around the  
Toroidal Core  
12 Connecting an external device using HDMI  
cable  
9
13 Connecting an external device using Audio  
(Analog) cable or Optical (Digital) cable  
14 Input mode  
14 Bluetooth  
FUNCtIONS  
16 SoundShare  
17 USB  
18 Using the remote control  
21 Software Upgrade  
14  
22 Troubleshooting  
23 Specifications  
tROUBLeSH2OOt2INg  
APPeNDIx  
23  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
getting started  
BefOre reaDing tHe User’s ManUaL  
Note the following terms before reading the user manual.  
icons used in this manual  
icon  
term  
Definition  
Indicates a situation where a function does not operate or settings may be  
canceled.  
caution  
note  
Indicates tips or instructions on the page that help you operate a function.  
safety instructions and troubleshooting  
1) Be sure to familiarize yourself with the Safety Instructions before using this product. (See page 3)  
2) If a problem occurs, check Troubleshooting. (See page 22)  
copyright  
©2013 Samsung Electronics Co.,Ltd.  
All rights reserved; no part or whole of this users manual may be reproduced or copied without the prior  
written permission of Samsung Electronics Co.,Ltd.  
WHat’s incLUDeD  
Check for the supplied accessories shown below.  
POWER  
TV POWER  
AUTO  
SOURCE POWER SPEAKER TV SOURCE  
SoundShare  
REPEAT  
TV VOL  
TV CH  
AUDIO SYNC  
TV MUTE TV INFO TV PRE-CH DIMMER  
SOUND EFFECT  
SMART VOLUME  
VOL  
S/W  
S/W  
MUTE  
VOL  
LEVEL  
LEVEL  
3D SOUND  
PLUS  
DRC  
AH59-02547B  
remote control / Batteries (aaa size)  
Bracket-Wall Mount  
User Manual  
(AH59-02547B / 4301-000116)  
(AH61-02952A)  
(AH68-02644D)  
(For Subwoofer power cable 1EA)  
aux cable  
UsB cable  
toroidal ferrite core  
(BN39-01286A)  
(AH39-01178A)  
(3301-000144)  
The appearance of the accessories may differ slightly from the illustrations above.  
Use the dedicated USB cable to connect external USB devices to the unit.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
descriptions  
frOnt/rear PaneL  
1
2
O
P
I
     C
7
8
3
4
5
9
H
D
M
I
I
N
T
A
X
     I
10  
H
D
M
I
O
U
6
11  
reMOte  
cOntrOL  
sensOr  
The remote control can operate  
Air Tracks made by SAMSUNG  
only.  
Connect USB devices such as  
MP3 players here to the play  
files on the devices.  
UsB POrt  
6
Connect to the digital (optical)  
output of an external device.  
DisPLay  
Displays the current mode.  
OPticaL in  
aUX in  
7
8
POWer  
BUttOn  
Turns the Crystal Surround Air  
Track on and off.  
Connect to the Analog output  
of an external device.  
Selects the D.IN, AUX, HDMI,  
BT, TV, USB input.  
Receives digital video and  
audio signals simultaneously  
from an external source using  
an HDMI cable.  
HDMi in  
JacK  
9
-
While the unit is powered,  
pressing the  
button for more  
fUnctiOn  
BUttOn  
than 3 seconds sets the button  
to act as MUte button. To  
cancel MUte button setup,  
Outputs digital video and audio  
signals simultaneously using an  
HDMI cable.  
HDMi OUt  
JacK  
10  
11  
press  
button for more than 3  
POWer  
sUPPLy  
caBLe  
Plug the power supply cable  
into the AC wall outlet.  
seconds again.  
VOLUMe  
(+/-)  
Controls the volume level.  
5
When you turn on this unit, there will be a 4 to 5 second delay before it produces sound.  
When disconnecting the power cable from the wall outlet, pull the plug. Do not pull the cable.  
Do not connect this unit or other components to an AC outlet until all connections between components are  
complete.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
remote control  
tOUr Of tHe reMOte cOntrOL  
POWeR BUttON  
tV POWeR BUttON  
Turns your Samsung TV on and off.  
Turns the Crystal Surround Air Track  
on and off.  
POWER  
TV POWER  
SPeAKeR  
SOURCe  
Press to select a connected SAT  
source. (SAT:Surround Air Track)  
This button allows you to choose to listen  
to audio from the Air track or your TV.  
AUTO  
SPEAKER TV SOURCE  
SoundShare  
SOURCE POWER  
tV SOURCe  
Press to select a connected TV's video  
source.  
AUtO POWeR  
Synchronizes the Air Track to a  
connected Optical source via the  
Optical jack so it turns on automatically  
when you turn on your TV.  
REPEAT  
Anynet+, SoundShare  
Anynet+ is a function that enables you  
to control other Samsung Devices  
with your Samsung TV's remote  
control.  
This produces TV sound on your SAT  
via a Bluetooth connection and  
controls the sound.  
RePeAt  
Select Repeat File, All, Random.  
TV VOL  
TV CH  
AUDIO SYNC  
tV VOLUMe  
Adjusts the TV volume level.  
TV MUTE TV INFO TV PRE-CH DIMMER  
tV CHANNeL, AUDIO SyNC  
Switches between the available TV  
channels.  
Used to help sync video to audio  
when connected to a digital TV.  
tV MUte  
Mutes the sound from the TV. Press  
again to restore the sound to the  
previous volume level.  
SOUND EFFECT  
SMART VOLUME  
VOL  
tV INFO, tV PRe-CH  
Display current TV status.  
Moves to the previous TV channel.  
DIMMeR  
You can control the brightness of the  
Display.  
S/W  
S/W  
MUTE  
VOL  
LEVEL  
LEVEL  
CONtROL BUttON  
SMARt VOLUMe  
Regulates and stabilizes the volume  
level against a drastic volume change.  
Play, pause, or stop playing  
a music file, or search forwards or  
backwards for a music file.  
3D SOUND  
PLUS  
DRC  
VOLUMe, S/W LeVeL  
SOUND eFFeCt  
Adjusts the volume level of the unit.  
Adjusts the Subwoofer level.  
Selects the Sound Effect:  
(MUSIC, NEWS, DRAMA, CINEMA,  
SPORTS, GAME, OFF (Original Sound))  
DRC  
AH59-02547B  
You can use this function to enjoy Dolby  
Digital sound when watching movies at  
low volume at night (Standard, MAX, MIN).  
3D SOUND PLUS  
This feature adds depth and  
spaciousness to the sound.  
MUte  
Mutes the sound from the unit. Press  
again to restore the sound to the  
previous volume level.  
SAT stands for Surround Air Track, which is a Samsungs proprietary name.  
The remote control can operate TVs made by SAMSUNG only.  
Depending on the TV you are using, you may not be able to operate your TV with this remote control. If you can't,  
operate the TV using the TV's remote control.  
Installing batteries in the Remote Control  
1. Lift the cover at the back of  
the remote control upward as  
shown.  
Install two AAA size batteries.  
Make sure to match the “+” and “–” ends  
of the batteries with the diagram inside the  
compartment.  
Replace the cover.  
Assuming typical TV usage,  
the batteries last for about  
one year.  
2.  
3.  
Operational Range of the Remote Control  
You can use the remote control up to 23 feet (7 meters) in a straight line from the unit. You can also operate the  
remote at a horizontal angle of up to 30° from the remote control sensor.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
connections  
instaLLing tHe WaLL MOUnt  
You can use the wall mount bracket to mount this unit on a wall.  
Installation Precautions  
Install on a vertical wall only.  
For the installation, avoid a location with high temperature or humidity, or a wall that cannot sustain the  
weight of the set.  
Check the strength of the wall. If the wall is not strong enough to support the unit, reinforce the wall or  
install the unit on different wall that can support the unit's weight.  
Purchase and use the flxing screws or mollys appropriate for the kind of wall you have (plaster board, iron  
board, wood, etc.). If possible, fix the support screws into wall studs.  
Connect cables from the unit to external devices before you install it on the wall.  
Make sure the unit is turned off and unplugged before you install it. Otherwise, it may cause an electric shock.  
1. Place the wall mount bracket on a wall surface and then  
secure it with two screws (not supplied).  
If you are hanging the unit below a TV, be sure to install the  
wall mount bracket so that the arrow ( ) is placed in the  
center of the TV.  
Also make sure the unit is at least two inches (5 cm)  
below the TV.  
2. Align the two HOLDER-SCREWs with the screw holes  
on the left and right sides of the MAIN UNIT, and then fix  
them to the main unit with the supplied screws.  
3. Fit the unit into the corresponding slots of the wall mount  
bracket. For secure installation, make sure the mounting  
studs slide firmly down into the bottom of the slots.  
1
2
4. The installation is complete.  
2 inches (5 cm) or more  
Do not hang onto the installed unit and avoid any impact to the unit.  
Secure the unit firmly to the wall so that it does not fall off. If the unit falls off, it may cause an  
injury or damage the product.  
When the unit is installed on a wall, please make sure that children do not pull any of the  
connecting cables, as it may cause it to fall.  
For the optimal performance of a wall mount installation, install the speaker system at least 2  
inches (5 cm) below the TV.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
connections  
cOnnecting tHe WireLess sUBWOOfer  
The Subwoofer's linking ID is preset at the factory and the main unit and subwoofer should link (connect  
wirelessly) automatically when the main unit is turned on. If the link indicator ( ) does not light when the main  
unit and subwoofer are turned on, please set the ID by following the procedure below.  
1. Plug the power cords of the main unit and subwoofer into an AC wall outlet.  
2. Press the ID Set button on the back of the subwoofer with a small, pointed object for 5 seconds.  
The STANDBY indicator is turned off and the LINK indicator (Blue LED) blinks quickly.  
TV MUTE TV INFO TV PRE-CH DIMMER  
POWER  
TV POWER  
3. While the main unit is powered off (STANDBY mode),  
AUTO  
SOURCE POWER SPEAKER TV SOURCE  
press MUte on the remote control for 5 seconds.  
SoundShare  
REPEAT  
SOUND EFFECT  
SMART VOLUME  
VOL  
TV VOL  
TV CH  
AUDIO SYNC  
4. The ID Set message appears on the main units VFD display.  
TV MUTE TV INFO TV PRE-CH DIMMER  
SOUND EFFECT  
SMART VOLUME  
VOL  
S/W  
S/W  
5. To finalize the link, turn the main units power on while the  
MUTE  
VOL  
S/W  
S/W  
LEVEL  
LEVEL  
MUTE  
VOL  
LEVEL  
LEVEL  
subwoofers Blue LED blinks.  
3D SOUND  
PLUS  
DRC  
The main unit and the subwoofer are now linked (connected).  
AH59-02547B  
3D SOUND  
DRC  
The Link indicator (blue LED) on the subwoofer is turned on.  
You can enjoy better sound from the wireless subwoofer by  
selecting the sound effect. (See page 19)  
Before moving or installing the product, be sure to turn off the power and disconnect the power  
cord.  
If the main unit is powered off, the wireless subwoofer will be in the standby mode and the  
STANDBY LED on the upper side will come on after the Link indicator (Blue LED) blinks for 30  
seconds.  
If you use a device that uses the same frequency (2.4GHz) near the system, interference may  
cause some sound interruption.  
The transmission distance of the wireless signal between the main unit and sub is about 33 ft.,  
but may vary depending on your operating environment. If a steel-concrete or metallic wall is  
between the main unit and the wireless subwoofer, the system may not operate at all, because  
the wireless signal cannot penetrate metal.  
If the main unit doesn't make a wireless connection, follow steps 1-5 above to retry the  
connection between the main unit and wireless subwoofer.  
The wireless receiving antenna is built into the wireless subwoofer. Keep the unit away from  
water and moisture.  
For optimal listening performance, make sure that the area around the wireless subwoofer  
location is clear of any obstructions.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
attacHing tHe tOrOiDaL ferrite cOre tO tHe POWer cOrD  
Of tHe sUBWOOfer  
Attaching the Toroidal ferrite core to the power cord of the subwoofer  
helps prevent RF interference from radio signals.  
1. Pull the fixing tab of the Toroidal ferrite core to open it.  
2. Make two loops around the core with the power cable of the  
subwoofer.  
3. Attach the Toroidal ferrite core to the Subwoofer power cord as the figure  
shows and press it until it clicks.  
LOOPing tHe POWer caBLe arOUnD tHe tOrOiDaL cOre  
Lift up to release the lock and open the core.  
Close the lock.  
Make two loops around the core with the power cable.  
(Start winding 5-10cm (12.75 - 25.5 in.)  
away from the core).  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
connections  
cOnnecting an eXternaL DeVice Using HDMi caBLe  
HDMI is the standard digital interface for connecting to such devices as a TVs, projectors, DVD players,  
Blu-ray players, set top boxes, and more.  
HDMI removes any loss of signal from analog conversion, enabling you to enjoy video and audio sound  
quality as it was originally created in the digital source.  
HDMI IN  
HDMi cable  
H
D
M
I
I
N
Digital Devices  
T
HDMI OUT  
HDMi cable  
H
D
M
I
O
U
HDMI IN  
Connect an HDMI cable (not supplied) from the HDMI IN jack on the back of the product to the HDMI OUT  
jack on your digital devices.  
and,  
HDMI OUt (HDMI)  
Connect an HDMI cable from the HDMI OUT jack on the back of the product to the HDMI IN jack on your TV.  
HDMI is an interface that enables the digital transmission of video and audio data with just  
a single connector.  
HDMI OUt (ARC)  
The ARC function allows digital audio to output via the HDMI OUT (ARC) port.  
It can be enabled only when the Air Track is connected to a TV that supports the ARC function.  
Anynet+ must be turned on.  
This function is not available if the HDMI cable does not support ARC.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
cOnnecting an eXternaL DeVice Using aUDiO (anaLOg)  
caBLe Or OPticaL (DigitaL) caBLe  
This unit comes equipped with one optical in digital jack and one audio analog in jack, giving you two ways to  
connect it to a TV.  
O
P
T
I
    A
    L
       I
OPTICAL IN  
Optical cable (not supplied)  
OPTICAL  
OUT  
AUX IN  
A
U
X
I
BD/DVD player/  
set-top box/  
or  
game console  
or  
AUDIO  
OUT  
audio cable  
OPtICAL IN  
Connect the Digital Input on the main unit to the OPTICAL OUT of the TV or Source Device  
.
or,  
AUx IN  
Connect AUX IN (Audio) on the main unit to the AUDIO OUT of the TV or Source Device.  
Be sure to match connector colors.  
Do not connect the power cord of this product or your TV to the wall outlet until all  
connections between components are complete.  
Before moving or installing this product, be sure to turn off the power and disconnect the power  
cord.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
functions  
INPUt MODe  
You can select D.IN, AUX, HDMI, BT, TV input or USB input.  
input mode  
Display  
Optical Digital input  
aUX input  
D.IN  
AUX  
HDMI  
BT  
HDMi input  
BLUetOOtH mode  
tV mode  
POWER  
TV POWER  
POWER  
TV POWER  
AUTO  
TV  
SOURCE POWER SPEAKER TV SOURCE  
SoundShare  
REPEAT  
AUTO  
TV VOL  
TV CH  
AUDIO SYNC  
UsB mode  
USB  
SPEAKER TV SOURCE  
SoundShare  
SOURCE POWER  
TV MUTE TV INFO TV PRE-CH DIMMER  
SOUND EFFECT  
SMART VOLUME  
VOL  
The unit turns off automatically in the following situations:  
REPEAT  
S/W  
S/W  
MUTE  
VOL  
LEVEL  
LEVEL  
BT/TV/USB/HDMI/ARC/D.IN MODE  
3D SOUND  
PLUS  
DRC  
AH59-02547B  
TV VOL  
TV CH  
AUDIO SYNC  
- If there is no audio signal for 20 minutes.  
AUX Mode  
- If no KEY input is entered for 8 hours when the cable is connected.  
- If the AUX cable is disconnected for 20 minutes.  
The ARC function is activated in D.IN mode if the unit is connected to an ARC supporting TV.  
To turn off the ARC function, turn Anynet off.  
Use the provided cable if a USB flash memory device cannot be connected directly to the unit.  
BLUetOOtH  
You can use a Bluetooth device to enjoy music with high quality stereo sound, all without wires!  
What is Bluetooth?  
Bluetooth is a technology that enables Bluetooth-compliant devices to interconnect easily with each other using  
a short wireless connection.  
A Bluetooth device may cause noise or malfunction, depending on usage, when:  
- A part of your body is in contact with the receiving/transmitting system of the Bluetooth device or the Air  
Track.  
- It is subject to electrical variation from obstructions caused by a wall, corner, or office partition.  
- It is exposed to electrical interference from same frequency-band devices including medical equipment,  
microwave ovens, and wireless LANs.  
Pair the Air Track with the Bluetooth device while they are close together.  
The further the distance is between Air Track and Bluetooth device, the worse the quality is.  
If the distance exceeds the Bluetooth operational range, the connection is lost.  
In poor reception-sensitivity areas, the Bluetooth connection may not work properly.  
The Bluetooth connection only works when it is close to the set. The connection will be automatically cut off if  
the Bluetooth device is out of range. Even within range, the sound quality may be degraded by obstacles  
such as walls or doors.  
This wireless device may cause electric interference during its operation.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
to connect the Air track to a Bluetooth device  
Check if the Bluetooth device supports the Bluetooth compliant stereo headset function.  
Connect  
Bluetooth device  
1. Press the sOUrce button on the remote control of the AirTrack to display the Bt message.  
You will see Wait for 4 seconds and then Bt reaDy on the front display of the Air Track.  
2. Select the Bluetooth menu on the Bluetooth device you want to connect. (Refer to the Bluetooth  
device's user manual.)  
3. Select the Stereo headset menu on the Bluetooth device.  
You will see a list of scanned devices.  
4. Select "[samsung] airtrack" from the list.  
When the Air Track is connected to the Bluetooth device, it will display Bt cOnnecteD  
Bt on the front  
display.  
If the Bluetooth device has failed to pair with the Air Track, delete the previous “[Samsung] AirTrack” found  
by the Bluetooth device and have it search for the Air Track again.  
5. Play music on the connected device.  
You can listen to the music playing on the connected Bluetooth device over the Crystal Surround Air Track  
system.  
In BT mode, Play/Repeat/Stop/Next/Prev functions are not available.  
You may be required to enter a PIN code (password) when connecting the Bluetooth device to  
the Air Track. If the PIN code input window appears, enter <0000>.  
The Air Track supports SBC data (44.1kHz, 48kHz).  
The AVRCP feature is not supported.  
Connect only to a Bluetooth device that supports the A2DP (AV) function.  
You cannot connect to a Bluetooth device that supports only the HF (Hands Free) function.  
Only one Bluetooth device can be paired at a time.  
Once you have turned off Air Track and the pairing is disconnected, the pairing will not be  
restored automatically. To reconnect, you must pair the device again.  
Search or connection may not be performed properly by Air Track in the following cases:  
- If there is a strong electrical field around Air Track.  
- If several Bluetooth devices are simultaneously paired with AirTrack  
- If the Bluetooth device is turned off, not in place, or malfunctions  
- Note that such devices as microwave ovens, wireless LAN adaptors, fluorescent lights, and gas  
stoves use the same frequency range as the Bluetooth device, which can cause electric  
interference.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
functions  
to disconnect the Bluetooth device from the Air track  
You can disconnect the Bluetooth device from the Air Track.  
For instructions, see the Bluetooth device's user manual.  
The Air Track will be disconnected.  
When the Air Track is disconnected from the Bluetooth device the Air Track will display Bt DiscOnnecteD  
on the front display.  
to disconnect the Air track from the Bluetooth device  
Press the  
Track.  
button on the side panel of the Air Track to switch from Bt to another mode or turn off the Air  
The connected Bluetooth device will wait a certain amount of time for a response from the Air Track before  
terminating the connection.  
(Disconnection time may differ, depending on the Bluetooth device)  
The currently connected device will be disconnected.  
In Bluetooth connection mode, the Bluetooth connection will be lost if the distance between the Air  
Track and the Bluetooth device exceeds 16.25 ft. (5m).  
If the Bluetooth device comes back into the effective range after disconnecting, you can restart the Air  
Track to restore the pairing with the Bluetooth device.  
The Air Track automatically turns off after 20 minutes in the Ready state.  
sOUnDsHare  
This section explains how to connect the Crystal Surround Air Track to a Bluetooth compatible SAMSUNG TV.  
to connect the Crystal Surround Air track to a Bluetooth compatible  
Samsung tV  
Connect  
Press the  
button to select the tV mode, and then connect the TV to the Crystal Surround Air Track.  
The unit will play the TV's audio when it is connected to the TV.  
If you change to another mode, except the TV SoundShare mode, or turn off the Air Track, you will hear audio  
from the TV again.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
<to pair to your tV>  
To produce TV sound on your Air Track via a Bluetooth connection, you need to pair your system to the Bluetooth  
compliant TV first. Once the pairing is established, the pairing information is recorded and kept and no further  
Bluetooth connection message will appear. Bring the Air Track and the TV close together before pairing.  
1. Turn on the Samsung TV and Air Track.  
Set Add New Device in the TV's SoundShare Setting menu to On.  
2. When you change the mode of the Air Track to tV, a message asking whether to proceed with  
Bluetooth pairing is displayed. "[Samsung] AirTrack" appears on the TV screen.  
3. Select <yes> on the TV screen. The pairing with the Air Track will be completed.  
Once the pairing is established, when you change the Air Track to the TV mode from other input modes, it will  
automatically connect to the TV.  
Changing the Air Track from TV mode to any other mode will cancel the SoundShare connection.  
If you want to cancel the existing pairing of the SAT to a TV and pair your SAT to a different TV.  
- Press the PLay/PaUse button on the SAT for 5 seconds in the TV input mode to cancel the existing pairing.  
You can now pair it to a different TV.  
In the SoundShare mode, you can control the volume and mute using either the TV remote or the SAT remote.  
TV SoundShare operation range  
- recommended pairing range: within 20 inches (within 50cm.)  
- recommended operation range: within 16.25 ft. (5m)  
If the distance between the Air Track and Samsung TV is over 16.25 ft. (5m), the connection or the  
sound can be cut off. If this occurs, connect to the Bluetooth device again within the operational range.  
Make sure the Samsung TV's SoundShare mode is on before you use this function.  
The PLay, neXt, PreV, stOP buttons will not work in the SoundShare mode.  
Bluetooth Standby On function  
- Air Track will be powered on automatically when you turn the TV on if you connected TV and Air Track with  
SoundShare function.  
- You can toggle this fucntion On/Off by pressing sOUrce button over 5 seconds when AirTrack is  
powered off. If set to Off, the product turns off automatically when the TV turns off, but it does not turn on  
automatically.  
The SoundShare function is supported by some Samsung TVs released after 2012.  
Check whether your TV supports SoundShare before you begin.  
(For more information, refer to the user's guide of your TV)  
USB  
1. Connect the USB device to the USB port on the side of the unit.  
2. Press the ( ) button on the side panel of the Air Track repeatedly until UsB appears.  
3. UsB appears on the display screen and then disappears.  
The Crystal Surround Air Track connection is complete.  
The SAT automatically turZns off (Auto Power Off) if no USB device has been connected for more than 20  
minutes.  
Before you connect a USB device  
Be aware of the following:  
If the file name of a folder on a USB device exceeds 10 characters, it is  
not displayed on the VFD.  
This product may not be compatible with certain types of USB storage  
media.  
The Air Track supports the FAT16 and FAT32 file systems.  
- The NTFS file system is not supported.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
functions  
Connect USB devices directly to the USB port of the product. Otherwise, you may encounter a USB  
compatibility problem.  
Do not connect multiple storage devices to the product via a multi-card reader. It may not operate  
properly.  
Digital camera PTP protocols are not supported.  
Do not remove the USB device while it is being read.  
DRM-protected music files (MP3, WMA) from a commercial web site will not be played.  
External HDDs are not supported.  
Mobile phone devices are not supported.  
File Format Type Compatibility list:  
format  
codec  
MPEG 1 Layer2  
MPEG 1 Layer3  
MPEG 2 Layer3  
Wave_Format_MSAudio1  
Wave_Format_MSAudio2  
AAC  
*.mp3  
*.wma  
*.aac  
AAC-LC  
HE-AAC  
*.wav  
*.Ogg  
*.flac  
-
OGG 1.1.0  
FLAC 1.1.0, FLAC 1.2.1  
Supporting Sampling Rate above 16KHz  
Using tHe reMOte cOntrOL  
POWER  
TV POWER  
Play/Pause/Stop  
AUTO  
SOURCE POWER SPEAKER TV SOURCE  
SoundShare  
REPEAT  
During playback, press the  
+#,@ button.  
TV VOL  
TV CH  
AUDIO SYNC  
TV MUTE TV INFO TV PRE-CH DIMMER  
TV MUTE TV INFO TV PRE-CH DIMMER  
Press the +  
#
button again to stop playing the file temporarily.  
button to play the selected file.  
SOUND EFFECT  
SMART VOLUME  
VOL  
Press the +  
#
S/W  
S/W  
MUTE  
VOL  
LEVEL  
LEVEL  
SOUND EFFECT  
SMART VOLUME  
3D SOUND  
PLUS  
DRC  
To stop playback, press the Stop (@) button during playback.  
AH59-02547B  
Skip Forward/Back  
POWER  
TV POWER  
AUTO  
SOURCE POWER SPEAKER TV SOURCE  
During playback, press the [,] button.  
SoundShare  
REPEAT  
TV VOL  
TV CH  
AUDIO SYNC  
When there is more than one file and you press the ] button, the next file  
is selected.  
TV MUTE TV INFO TV PRE-CH DIMMER  
TV MUTE TV INFO TV PRE-CH DIMMER  
SOUND EFFECT  
SMART VOLUME  
VOL  
S/W  
S/W  
MUTE  
VOL  
LEVEL  
LEVEL  
When there is more than one file and you press the [ button, the  
SOUND EFFECT  
SMART VOLUME  
3D SOUND  
PLUS  
DRC  
previous file is selected.  
AH59-02547B  
Using the RePeAt function  
POWER  
TV POWER  
POWER  
TV POWER  
AUTO  
SOURCE POWER SPEAKER TV SOURCE  
Repeat playback allows you to repeatedly play a file, repeat all, randomly play  
files, or turn Repeat off.  
SoundShare  
REPEAT  
AUTO  
SPEAKER TV SOURCE  
SoundShare  
SOURCE POWER  
TV VOL  
TV CH  
AUDIO SYNC  
TV MUTE TV INFO TV PRE-CH DIMMER  
Press the RePeAt button.  
SOUND EFFECT  
SMART VOLUME  
VOL  
REPEAT  
S/W  
S/W  
MUTE  
VOL  
LEVEL  
LEVEL  
rePeat Off : Cancels Repeat Playback.  
rePeat fiLe : Repeat playing a track.  
rePeat aLL : Repeat playing all tracks.  
3D SOUND  
PLUS  
DRC  
TV VOL  
TV CH  
AUDIO SYNC  
AH59-02547B  
rePeat ranDOM : Plays tracks in random order. (A track that has  
already been played may be played again.)  
You can set the REPEAT function during the playback of music from  
a USB drive.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TV VOL  
TV CH  
AUDIO SYNC  
POWER  
TV POWER  
Muting the sound  
AUTO  
SOURCE POWER SPEAKER TV SOURCE  
SoundShare  
REPEAT  
TV MUTE TV INFO TV PRE-CH  
DIMMER  
This is useful when answering a doorbell or telephone call.  
TV VOL  
TV CH  
AUDIO SYNC  
TV MUTE TV INFO TV PRE-CH DIMMER  
1. To mute the sound of this unit, press the MUte button on the remote  
control.  
SOUND EFFECT  
SMART VOLUME  
VOL  
SOUND EFFECT  
SMART VOLUME  
VOL  
S/W  
S/W  
MUTE  
VOL  
LEVEL  
LEVEL  
3D SOUND  
PLUS  
DRC  
2. To mute the TV, press the tV MUte (  
control.  
)
button on the remote  
S/W  
S/W  
AH59-02547B  
MUTE  
VOL  
LEVEL  
LEVEL  
3. Press MUte/ tV MUte (  
) on the remote control again (or press  
3D SOUND  
PLUS  
DRC  
VOLUMe +/–) to restore the sound.  
POWER  
TV POWER  
Using the 3D SOUND PLUS function  
AUTO  
SOURCE POWER SPEAKER TV SOURCE  
SoundShare  
REPEAT  
SOUND EFFECT  
SMART VOLUME  
VOL  
TV VOL  
TV CH  
AUDIO SYNC  
The 3D Sound Plus feature adds depth and spaciousness to the sound.  
TV MUTE TV INFO TV PRE-CH DIMMER  
SOUND EFFECT  
SMART VOLUME  
S/W  
S/W  
VOL  
MUTE  
VOL  
LEVEL  
LEVEL  
Press 3D SOUND PLUS on the remote control.  
S/W  
S/W  
MUTE  
VOL  
LEVEL  
LEVEL  
Each time the button is pressed, the selection changes as follows :  
3D SOUND PLUS OFF 3D SOUND PLUS MUSIC 3D SOUND  
PLUS MOVIE  
3D SOUND  
PLUS  
DRC  
3D SOUND  
PLUS  
DRC  
AH59-02547B  
When you turn on 3D Sound Plus, the Sound Effect function will  
automatically change to OFF.  
POWER  
TV POWER  
Using the SMARt VOLUMe function  
This will regulate and stabilize the volume level against a drastic volume  
change caused by a channel change or scene transition.  
AUTO  
SOURCE POWER SPEAKER TV SOURCE  
SoundShare  
REPEAT  
SOUND EFFECT  
SMART VOLUME  
VOL  
TV VOL  
TV CH  
AUDIO SYNC  
TV MUTE TV INFO TV PRE-CH DIMMER  
SOUND EFFECT  
SMART VOLUME  
S/W  
S/W  
VOL  
MUTE  
VOL  
LEVEL  
LEVEL  
Press SMARt VOLUMe on the remote control.  
Each time the button is pressed, the selection changes as follows :  
SMART VOLUME ON SMART VOLUME OFF  
S/W  
S/W  
MUTE  
VOL  
LEVEL  
LEVEL  
3D SOUND  
PLUS  
DRC  
3D SOUND  
PLUS  
DRC  
AH59-02547B  
POWER  
TV POWER  
Using the Sound effect function  
You can select from 7 different sound modes - MUSIC, NEWS, DRAMA,  
CINEMA, SPORTS, GAME, and OFF (Original Sound) - depending on the  
type of sources you want to enjoy.  
AUTO  
SOURCE POWER SPEAKER TV SOURCE  
SoundShare  
REPEAT  
SOUND EFFECT  
SMART VOLUME  
VOL  
TV VOL  
TV CH  
AUDIO SYNC  
TV MUTE TV INFO TV PRE-CH DIMMER  
SOUND EFFECT  
SMART VOLUME  
S/W  
S/W  
VOL  
MUTE  
VOL  
LEVEL  
LEVEL  
S/W  
S/W  
MUTE  
VOL  
LEVEL  
LEVEL  
Press SOUND eFFeCt on the remote control.  
3D SOUND  
PLUS  
DRC  
3D SOUND  
PLUS  
DRC  
AH59-02547B  
Select the OFF mode if you want to enjoy the original sound.  
We recommend that you select a Sound Effect based on the  
source material and your personal taste.  
When you choose a Sound Effect mode (except OFF), 3D Sound  
Plus will automatically be turned OFF.  
POWER  
TV POWER  
Using the S/W LeVeL function  
You can control the base volume with the S/W Level button on the remote  
control.  
AUTO  
SOURCE POWER SPEAKER TV SOURCE  
SoundShare  
REPEAT  
SOUND EFFECT  
SMART VOLUME  
VOL  
TV VOL  
TV CH  
AUDIO SYNC  
TV MUTE TV INFO TV PRE-CH DIMMER  
SOUND EFFECT  
SMART VOLUME  
S/W  
S/W  
VOL  
MUTE  
VOL  
LEVEL  
LEVEL  
1. Press the S/W LeVeL button on the remote control.  
S/W  
S/W  
MUTE  
VOL  
LEVEL  
LEVEL  
3D SOUND  
PLUS  
DRC  
2. “SW 0” appears on the display.  
3D SOUND  
PLUS  
DRC  
AH59-02547B  
3. Press or button on the LeVeL key if you want to increase or decrease  
the subwoofer volume. You can set it from SW -6 to SW +6.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
functions  
POWER  
TV POWER  
Using the AUtO POWeR LINK function  
The Crystal Surround Air Track is automatically turned on when you turn on the  
TV or any device connected to the Air Track with the optical cable.  
POWER  
TV POWER  
AUTO  
SOURCE POWER SPEAKER TV SOURCE  
SoundShare  
REPEAT  
AUTO  
TV VOL  
TV CH  
AUDIO SYNC  
SPEAKER TV SOURCE  
SOURCE POWER  
TV MUTE TV INFO TV PRE-CH DIMMER  
SoundShare  
SOUND EFFECT  
SMART VOLUME  
VOL  
REPEAT  
Press AUtO POWeR on the remote control of this unit.  
S/W  
S/W  
MUTE  
LEVEL  
LEVEL  
VOL  
3D SOUND  
PLUS  
DRC  
The Auto power link function turns on and off each time you press AUtO  
TV VOL  
TV CH  
AUDIO SYNC  
AH59-02547B  
POWeR.  
aUtO POWer LinK  
Display  
POWER LINK ON  
POWER LINK OFF  
On  
Off  
If a TV or any device connected to Air Track with the optical cable is  
off and there is no digital input, the Air Track is turned off after 20  
minutes.  
These functions are available only when Anynet+ (HDMI-CEC) is  
turned off.  
POWER  
TV POWER  
SoundShare  
AUDIO SYNC  
Using the AUDIO SyNC function  
AUTO  
REPEAT  
SOURCE POWER SPEAKER TV SOURCE  
SoundShare  
REPEAT  
Video may appear out of synch with the audio if the Air Track is connected to a  
TV VOL  
TV CH  
AUDIO SYNC  
TV VOL  
TV CH  
TV MUTE TV INFO TV PRE-CH DIMMER  
digital TV. If this occurs, adjust the audio delay time to match the video.  
SOUND EFFECT  
SMART VOLUME  
VOL  
TV MUTE TV INFO TV PRE-CH DIMMER  
Press AUDIO SyNC +/–. on the remote control of this unit.  
S/W  
S/W  
MUTE  
VOL  
LEVEL  
LEVEL  
3D SOUND  
PLUS  
DRC  
You can use the + , - buttons to set the audio delay time between 0 ms  
and 300 ms.  
AH59-02547B  
SOUND EFFECT  
SMART VOLUME  
VOL  
In USB mode, TV mode or BT mode, the Audio Sync function may  
not work.  
POWER  
TV POWER  
Using the DRC function  
This feature balances the range between the loudest and quietest sounds.  
You can use this function to enjoy Dolby Digital sound when watching movies  
at low volume at night.  
AUTO  
SOURCE POWER SPEAKER TV SOURCE  
SoundShare  
REPEAT  
SOUND EFFECT  
SMART VOLUME  
VOL  
TV VOL  
TV CH  
AUDIO SYNC  
TV MUTE TV INFO TV PRE-CH DIMMER  
SOUND EFFECT  
SMART VOLUME  
VOL  
S/W  
S/W  
MUTE  
VOL  
LEVEL  
LEVEL  
S/W  
S/W  
MUTE  
VOL  
LEVEL  
LEVEL  
Press DRC on the remote control of this unit.  
3D SOUND  
PLUS  
DRC  
Each time the button is pressed, the selection changes as follows :  
DRC STANDARD DRC MAX DRC MIN  
AH59-02547B  
3D SOUND  
PLUS  
DRC  
POWER  
TV POWER  
SoundShare  
Using the DIMMeR function  
AUTO  
REPEAT  
TV VOL  
SOURCE POWER SPEAKER TV SOURCE  
SoundShare  
REPEAT  
This feature controls the brightness of the Display.  
Press DIMMeR on the remote control of this unit.  
Each time the button is pressed, the selection changes as follows :  
TV VOL  
TV CH  
AUDIO SYNC  
TV CH  
AUDIO SYNC  
TV MUTE TV INFO TV PRE-CH DIMMER  
SOUND EFFECT  
SMART VOLUME  
VOL  
TV MUTE TV INFO TV PRE-CH DIMMER  
S/W  
S/W  
MUTE  
VOL  
LEVEL  
LEVEL  
3D SOUND  
PLUS  
DRC  
DIMMER ON  
DIMMER OFF  
AH59-02547B  
SOUND EFFECT  
SMART VOLUME  
VOL  
SPeAKeR button  
POWER  
TV POWER  
POWER  
TV POWER  
If the TV and Air Track are connected via HDMI, this button lets you select  
between listening to audio through your TV or through the Air Track.  
AUTO  
SOURCE POWER SPEAKER TV SOURCE  
SoundShare  
REPEAT  
AUTO  
SPEAKER TV SOURCE  
SoundShare  
SOURCE POWER  
TV VOL  
TV CH  
AUDIO SYNC  
TV MUTE TV INFO TV PRE-CH DIMMER  
Press SPeAKeR on the remote control of this unit.  
SOUND EFFECT  
SMART VOLUME  
VOL  
REPEAT  
aUDiO MODe  
HDMi in  
sPeaKer  
tV  
scroll Display  
TV SPEAKER  
AVR SPEAKER  
TV SPEAKER  
AVR SPEAKER  
Display  
TV SPK  
HDMI  
S/W  
S/W  
MUTE  
VOL  
LEVEL  
LEVEL  
3D SOUND  
PLUS  
DRC  
TV VOL  
TV CH  
AUDIO SYNC  
AH59-02547B  
air  
t
rack  
tV  
rack  
S MUTE  
TV ARC  
arc  
air  
t
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
POWER  
TV POWER  
POWER  
TV POWER  
Using the Anynet+(HDMI-CeC) function  
AUTO  
SOURCE POWER SPEAKER TV SOURCE  
SoundShare  
REPEAT  
AUTO  
SPEAKER TV SOURCE  
SoundShare  
SOURCE POWER  
TV VOL  
TV CH  
AUDIO SYNC  
Anynet+ is a function that enables you to control other Samsung Devices  
with your Samsung TV's remote control.  
TV MUTE TV INFO TV PRE-CH DIMMER  
SOUND EFFECT  
SMART VOLUME  
VOL  
REPEAT  
S/W  
S/W  
MUTE  
VOL  
LEVEL  
LEVEL  
The Anynet+ function turns on and off each time you press Anynet+.  
3D SOUND  
PLUS  
DRC  
TV VOL  
TV CH  
AUDIO SYNC  
1. Connect the product to a Samsung TV with an the HDMI cable.  
(See page 12)  
AH59-02547B  
2. Set the Anynet+ function on your TV and the SAT to ON. (See the  
TV instruction manual for more information.)  
Depending on your TV, certain HDMI output resolutions may not  
work.  
Please refer to the users manual of your TV and check for the  
logo (If your TV has an  
Anynet+ function.)  
logo, then it supports the  
Using the tV functions (with Samsung tVs only)  
POWER  
TV POWER  
POWER  
TV POWER  
AUTO  
SOURCE POWER SPEAKER TV SOURCE  
SoundShare  
REPEAT  
AUTO  
Press tV SOURCe on the remote control to change the TV's input source.  
Press tV INFO on the remote control to display the TV channel  
SPEAKER TV SOURCE  
SoundShare  
SOURCE POWER  
TV VOL  
TV CH  
AUDIO SYNC  
TV MUTE TV INFO TV PRE-CH DIMMER  
SOUND EFFECT  
SMART VOLUME  
VOL  
REPEAT  
information.  
S/W  
S/W  
MUTE  
VOL  
LEVEL  
LEVEL  
Press tV CH on the remote control to select the TV channel.  
3D SOUND  
PLUS  
DRC  
TV VOL  
TV CH  
AUDIO SYNC  
Press tV VOL on the remote control to increase or decrease the volume  
level.  
AH59-02547B  
TV MUTE TV INFO TV PRE-CH DIMMER  
Use tV Pre-cH button to move to the previous TV channel in TV mode.  
When you press the soundshare button, the TV's sound is  
transmitted through the Air Track system via a Bluetooth  
connection. The Air Track also controls the sound volume,  
sound quality, etc.  
The remote control can operate TVs made by SAMSUNG only.  
sOftWare UPgraDe  
Samsung may offer upgrades for the Crystal  
Surround Air Track's system firmware in the future.  
If an upgrade is offered, you can upgrade the  
firmware by connecting a USB drive with the  
firmware upgrade stored on it to the USB port on  
your Air Track.  
Note that if there are multiple upgrade files, you must  
load them onto the USB drive singly and use them to  
upgrade the firmware one at a time.  
Please visit Samsung.com or contact the Samsung  
call center to receive more information about  
downloading upgrades files.  
Insert a USB drive containing the firmware upgrade into the USB port on the main unit.  
Do not disconnect the power or remove the USB drive while upgrades are being applied. The main unit will turn  
off automatically after completing the firmware upgrade.  
When software is upgraded, settings you have made will return to their default (factory) settings.  
We recommend you write down your settings so that you can easily reset them after the upgrade.  
Once upgrading the product software is completed, turn off the product and then press and hold  
to reset the product.  
(@)  
button for a while  
If the firmware fails to upgrade, we recommend formatting the USB device in FAT16 and trying again.  
For upgrading purposes, do not format the USB drive in NTFS format because it is not a supported file system.  
Depending on the manufacturer, some USB devices may not be supported.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
troubleshooting  
Before requesting service, please check the following.  
symptom  
check  
remedy  
the unit will not turn on.  
• Is the power cord plugged into  
• Connect the power plug to the  
the outlet?  
outlet.  
a function does not work when the  
• Is there static electricity in the  
• Disconnect the power plug and  
button is pressed.  
air?  
connect it again.  
sound is not produced.  
• Is the unit properly connected  
• Connect it correctly.  
to your TV?  
• Press the Mute button to  
• Is the Mute function on?  
cancel the function.  
• Is the volume set to minimum?  
• Adjust the volume.  
the Picture does not appear on a tV • Is the TV connected properly?  
• Connect it correctly.  
when the function is selected.  
the remote control does not work.  
• Are the batteries drained?  
• Replace with new batteries.  
• Is the distance between remote • Move closer to the unit.  
control and main unit too far?  
the sound from the left/right  
channels are reversed.  
• Are the left/right audio output  
cables from the TV connected  
properly?  
• Check the left/right channel and  
connect it/them correctly.  
the soundshare (tV pairing) failed.  
• Does your TV support  
SoundShare?  
• SoundShare is supported by  
some Samsung TVs released  
after 2012. Check your TV to  
see if it supports SoundShare.  
• Is your TV firmware the latest  
version?  
• Update your TV with the latest  
firmware.  
• Does an error occur when  
connecting?  
• Contact the call center.  
• Reset the TV MODE and  
connect again.  
• Press  
button for 5 seconds  
to reset the product.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
appendix  
sPecificatiOns  
HW-F450  
Model name  
Power supply  
AC 120V~60Hz  
Standby power consumption 0.45W  
Main unit  
25.9W  
20W  
Power  
consumption  
Subwoofer  
(PS-WF450)  
USB  
5V/0.5A  
4.28 Ibs  
Main unit  
generaL  
Weight  
Subwoofer  
(PS-WF450)  
12.01 Ibs  
Main unit  
35.67 x 1.77 x 2.76 inches  
6.89 x 13.78 x 11.61 inches  
Dimensions  
(W x H x D)  
Subwoofer  
(PS-WF450)  
Operating temperature range +41°F to +95°F  
Operating humidity range  
10 % to 75 %  
Main unit  
80W/CH, 4OHM, THD = 10%, 1kHz  
Rated output  
power  
Subwoofer  
(PS-WF450)  
120W, 4OHM, THD = 10%, 70Hz  
aMPLifier  
input)  
S/N ratio (analog  
65 dB  
65 dB  
Separation(1kHz)  
* S/N ratio, distortion, separation and usable sensitivity are based on measurement using AES (Audio  
Engineering Society) guidelines.  
*: Nominal specification  
- Samsung Electronics Co., Ltd reserves the right to change the specifications without notice.  
- Weight and dimensions are approximate.  
As an ENERGY STAR Partner, Samsung  
has determined that this product or product  
models meets the ENERGY STAR guidelines  
for energy efficiency.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warranty  
LiMiteD Warranty tO OriginaL PUrcHaser  
This SAMSUNG brand product, as supplied and distributed by Samsung Electronics America, Inc. (SAMSUNG) and delivered new,  
in the original carton to the original consumer purchaser, is warranted by SAMSUNG against manufacturing defects in materials and  
workmanship for a limited warranty period of:  
One (1) year Parts and Labor*  
(*90 Days Parts and Labor for commercial Use)  
This limited warranty begins on the original date of purchase, and is valid only on products purchased and used in the United States. To  
receive warranty service, the purchaser must contact SAMSUNG for problem determination and service procedures. Warranty service  
can only be performed by a SAMSUNG authorized service center. The original dated bill of sale must be presented upon request as  
proof of purchase to SAMSUNG or SAMSUNG's authorized service center. Transportation of the product to and from  
the service center is the responsibility of the purchaser.  
SAMSUNG will repair or replace this product, at our option and at no charge as stipulated herein, with new or reconditioned parts  
or products if found to be defective during the limited warranty period specified above. All replaced parts and products become the  
property of SAMSUNG and must be returned to SAMSUNG. Replacement parts and products assume the remaining original warranty,  
or ninety (90) days, whichever is longer.  
SAMSUNGs obligations with respect to software products distributed by SAMSUNG under the SAMSUNG brand name are set forth in the  
applicable end user license agreement. Non-SAMSUNG hardware and software products, if provided, are on an “AS IS” basis.  
Non-SAMSUNG manufacturers, suppliers, publishers, and service providers may provide their own warranties.  
This limited warranty covers manufacturing defects in materials and workmanship encountered in normal, and except to the extent  
otherwise expressly provided for in this statement, noncommercial use of this product, and shall not apply to the following, including,  
but not limited to: damage which occurs in shipment; delivery and installation; applications and uses for which this product was not  
intended; altered product or serial numbers; cosmetic damage or exterior finish; accidents, abuse, neglect, fire, water, lightning or other  
acts of nature; use of products, equipment, systems, utilities, services, parts, supplies, accessories, applications, installations, repairs,  
external wiring or connectors not supplied and authorized by SAMSUNG, or which damage this product or result in service problems;  
incorrect electrical line voltage, fluctuations and surges; customer adjustments and failure to follow operating instructions, cleaning,  
maintenance and environmental instructions that are covered and prescribed in the instruction book; product removal or reinstallation;  
reception problems and distortion related to noise, echo, interference or other signal transmission and delivery problems. SAMSUNG  
does not warrant uninterrupted or error-free operation of the product.  
THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED AND DESCRIBED ABOVE, AND NO WARRANTIES  
WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY  
OR FITNESS FOR A PARTICULAR PURPOSE, SHALL APPLY AFTER THE EXPRESS WARRANTY PERIODS STATED ABOVE, AND  
NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR CORPORATION WITH RESPECT TO THIS  
PRODUCT SHALL BE BINDING ON SAMSUNG. SAMSUNG SHALL NOT BE LIABLE FOR LOSS OF REVENUE OR PROFITS, FAILURE  
TO REALIZE SAVINGS OR OTHER BENEFITS, OR ANY OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED  
BY THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT, REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS  
BASED, AND EVEN IF SAMSUNG HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOR SHALL RECOVERY OF  
ANY KIND AGAINST SAMSUNG BE GREATER IN AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCT SOLD BY SAMSUNG  
AND CAUSING THE ALLEGED DAMAGE. WITHOUT LIMITING THE FOREGOING, PURCHASER ASSUMES ALL RISK AND LIABILITY  
FOR LOSS, DAMAGE OR INJURY TO PURCHASER AND PURCHASER’S PROPERTY AND TO OTHERS AND THEIR PROPERTY  
ARISING OUT OF THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT SOLD BY SAMSUNG NOT CAUSED DIRECTLY BY  
THE NEGLIGENCE OF SAMSUNG. THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL  
PURCHASER OF THIS PRODUCT, IS NONTRANSFERABLE AND STATES YOUR EXCLUSIVE REMEDY.  
Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential  
damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also  
have other rights which vary from state to state.  
To obtain warranty hardware service, please contact SAMSUNG customer care center.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
QUESTIONS OR COMMENTS?  
COUNTRY  
CALL  
OR VISIT US ONLINE AT  
WRITE  
1-800-SAMSUNG  
(726-7864)  
Samsung Electronics America, Inc. 85 Challenger  
Road Ridgefield Park, NJ 07660  
U.S.A  
AH68-02644D-00  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Radio Shack Weather Radio 63 1086 User Guide
RCA Network Router RC 930 User Guide
Remington Electric Shaver MS 5100 User Guide
Rosewill Network Card RNX N150UBE User Guide
Saleen Window 10 8002 C12167A User Guide
Samsung Stereo System HT XQ100 User Guide
Sanyo Air Conditioner 12RLS11 User Guide
Seagate Computer Drive EE252 User Guide
Sears Air Compressor 91972197 User Guide
Sears Lawn Mower 917372851 User Guide