Samsung Security Camera SCC B1031P User Guide

SCC-B1331(P)  
SCC-B1031P  
DIGITAL COLOR CAMERA  
user manual  
imagine the possibilities  
Thank you for purchasing this Samsung product.  
To receive more complete service,  
please register your product at  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety information  
CAUTION  
1. Do not drop objects on the product or apply strong blows to it. Keep away from a location subject to  
excessive vibration or magnetic interference.  
2. Do not install in a location subject to high temperature (over 140°F), low temperature (below -14°F), or high  
humidity. Doing so may cause fire or electric shock.  
RTS  
3. If you want to relocate the already installed product, be sure to turn off the power and then move or reinstall  
it.  
4. Remove the power plug from the outlet when there is a lighting storm. Neglecting to do so may cause fire or  
damage to the product.  
5. Keep out of direct sunlight and heat radiation sources. It may cause fire.  
6. Install it in a place with good ventilation.  
tant  
e
7. Avoid aiming the camera directly towards extremely bright objects such as sun, as this may damage the  
CCD image sensor.  
8. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases,  
shall be placed on the apparatus.  
9. The Mains plug is used as a disconnect device and shall stay readily operable at any time.  
FCC Statement  
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions :  
1) This device may not cause harmful interference, and  
2) This device must accept any interference received including interference that may cause undesired operation.  
r
Caution  
This equipment has been tested and found to comply with the limits for a Class A digital device, pursu-  
ant to part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful  
interference when the equipment is operated in a commercial environment.  
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used  
in accordance with the instruction manual, may cause harmful interference to radio communications.  
Operation of this equipment in a residential area is likely to cause harmful interference in which case the  
user will be required to correct the interference at his own expense.  
er on  
use  
IC Compliance Notice  
This Class A digital apparatus meets all requirements of the Canadian Interference.-  
Causing Equipment Regulations of ICES-003.  
ify  
or  
ck.  
English 3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Important Safety Instructions  
WARNING  
1. Read these instructions.  
2. Keep these instructions.  
3. Heed all warnings.  
4. Follow all instructions.  
5. Do not use this apparatus near water.  
6. Clean only with dry cloth.  
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.  
8. Do not install near any heat sources such as radiators, heat registers, or other apparatus (including  
amplifiers) that produce heat.  
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades  
with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide  
blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult  
an electrician for replacement of the obsolete outlet.  
10.Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and  
the point where they exit from the apparatus.  
11.Only use attachments/accessories specified by the manufacturer.  
12.Use only with cart, stand, tripod, bracket, or table specified by the manufacturer, or  
sold with the apparatus.  
13.Unplug this apparatus when a card is used. Use caution when moving the cart/  
apparatus combination to avoid injury from tip-over.  
14.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been  
damaged in any way, such as powersupply cord or plug is damaged, liquid has been spilled or objects have  
fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or  
has been dropped.  
Apparatus shall not be exposed to dripping or splashing and no objects filled with  
liquids, such as vases, shall be placed on the apparatus  
4 – DIGITAL COLOR CAMERA  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
Introduction  
Features  
PRODUCT & ACCESSORIES  
Part Names and Functions  
6
7
8
Installation  
Connecting the Auto Iris Lens Connector  
Mounting the lens  
Connecting cables and checking operation  
11  
11  
12  
How to use OSD Menu  
es  
wide  
sult  
Using Icons in the Menu  
Main Menu  
13  
13  
14  
16  
22  
23  
24  
25  
25  
Profile  
Camera Setup  
Intelligence  
Privacy zone Setup  
Other Set  
System Information  
Language  
and  
Specifications  
have  
y, or  
Specifications  
26  
th  
English 5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
P  
FEATURES  
High Resolution  
This camera has realized high resolution of 600 lines using the top-notch full digital image processing and  
special algorithm technologies.  
Intelligent Motion Detection & Tracking  
This is an intelligent function that automatically detects a motion of an object. You can set a virtual fence so it  
sounds an alert if an object passes / enters /exits the virtual fence or virtual area.  
XDR (eXtended Dynamic Range)  
Actively controls the gamma compensation in the way it operates the ambient luminance contrast in a  
certain pixel unit to determine the optimal visibility.  
High Sensitivity  
It implements images of high sensitivity using the up-to-date SONY Super-HAD Progressive CCD.  
Low Illumination  
It uses the digital signal technologies such as low illumination and Day/Night functions that make your camera  
identify objects even in the worst environment.  
Superior Backlight Adjustment  
When an object has a bright illumination or sunlight behind it, this camera automatically improves the  
shaded object picture quality.  
Digital Power Synchronization  
The full digital Line Lock function directly adjusts the vertical camera synchronization to enhance the  
operationability and reliability of this camera.  
Output Signal Setting  
You can set the following Video output signals: Image reversion (Horizontal, Vertical, or both), Privacy,  
Horizontal/Vertical profiling, and digital zooming.  
OSD(On Screen Display) Menu  
OSD menu is provided to display the status of camera and to configure the functions interactively.  
Came  
Coaxial Cable Communication  
This is a remote control function that overlaps the coaxial cable (for a transfer of the video signal) with the  
control signal. In installation or repair, this helps you control the communication controller (optional) without  
additional cabling.  
PRODUCT & ACCESSORIES  
6 – DIGITAL COLOR CAMERA  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
Product & Accessories  
Accessories  
and  
t
Main Product  
ra  
Camera  
C Mount Adapter  
User’s Manual  
Camera Holder(Mount)  
Auto Iris  
Lens Connector  
t
English 7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
R  
PART NAMES AND FUNCTIONS  
Side View  
Mount Adapter  
Fixing Grooves  
Auto Iris Lens  
Connector  
Camera Lens  
Auto Iris Lens  
Control Cable  
Auto Iris Lens Connector  
This groove is used for screwing the mount adapter, a part of the bracket where the camera will be installed.  
Auto Iris Lens Control Cable  
This cable transmits the power and signals from the camera for controlling the Auto Iris Lens.  
Mount Adapter Fixing Grooves  
These grooves are used when fixing screws of the mount adapter connected to the bracket when installing  
the camera on it.  
Note :  
When the camera lens becomes dirty, softly clean it with a lens tissue or a cloth soaked in pure ethanol.  
8 – DIGITAL COLOR CAMERA  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
Rear Panel  
<AC24/DC12V (SCC-B1331(P))>  
n
o
q
p
r
s
alled.  
ing  
<AC220V~240V(SCC-B1031P)>  
n
s
o
p
q
English 9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
This connector has input and output ports for, DAY/NIGHT switching,  
and alarm output signals.  
n
Input/Output Connector  
CO  
CO  
No.  
Function  
Description  
1
2
ALARM OUT  
GND  
Alarm out port for motion detection. (Open collector type)  
Grounding Port.  
Displays the current still image when it receives the Trigger signal.  
(Normal Open Type)  
3
4
5
TRIGGER IN  
SHUTTER (S0)  
SHUTTER (S1)  
This is a port for selecting an external high speed shutter mode.  
Conn  
the A  
If connected in LOW (0V), it will become ON inside.  
This is a port for selecting an external high speed shutter mode.  
If connected in LOW (0V), it will become ON inside.  
This is a port for selecting an external high speed shutter mode.  
P
N
6
7
SHUTTER (S2)  
5V OUT  
If connected in LOW (0V), it will become ON inside.  
Use within typical DC +5V 100mA  
1
2
3
4
o
SETUP Switch  
This switch is used to set the function or property. When this switch is pressed for at least 2 seconds, the  
MAIN MENU appears.  
ef (Left/Right) : By pressing this switch left or right, you can move left or right on the menu or change the  
displayed value.  
cd (Up/Down) : By pressing this switch up or down, you can move up or down on the menu.  
No  
: When you press this switch in the menu, the selected function is confirmed. To enter a submenu, press  
this button.  
p
q
r
s
Power Display LED  
When the power is normally connected, the red LED lights.  
Video OUT Port  
This is connected to the Video Input Port of the monitor and it outputs the Video signals.  
GND  
This is a grounding port.  
Power Connection Port  
This is connected to the Power cable.  
10 – DIGITAL COLOR CAMERA  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
MOUNTING THE LENS  
CONNECTING THE AUTO IRIS LENS  
CONNECTOR  
When using the CS lens  
Mount the CS lens by rotating it clockwise as shown  
in the picture:  
CS lens  
Connect each uncovered shutter control cables to  
the Auto Iris Lens Connector as the following  
When using the C lens  
Pin  
No.  
DC Control  
Type  
After mounting the C-mount adapter by rotating it  
clockwise, turn the C lens clockwise until it is fixed as  
shown in the picture.  
Video Control Type  
1
2
3
4
Damp(-)  
Damp(+)  
Drive(+)  
Drive(-)  
Power (+12V)  
Not applicable  
Video Signal  
Ground  
he  
C 렌즈  
C lens  
e the  
Note :  
ress  
You can switch a control type of the lens in the menu.  
English 11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
CONNECTING CABLES AND  
CHECKING OPERATION  
USI  
E
Finally connect the power adapter to the  
camera. You can connect 2 lines of the power  
adapter to the camera using the Slot Head  
screwdriver as shown in the picture.  
Connect one end of the BNC cable to the  
VIDEO OUT Port on the rear of the camera.  
B
sa  
Connect another end of the BNC cable to the  
VIDEO IN Port on the monitor.  
(GND: cable with the white stripe line)  
R
R
U
P
O
e
1
2
3
4
.
.
.
.
A
L
A
R
G
A
M
N
O
D
U
T
S
T
R
5
6
7
8
IG  
.
.
.
.
G
S
S
H
H
E
U
U
H
R
T
T
U
I
T
T
T
N
E
T
R
E
(S  
R
1
(S  
)
O
5V  
ER  
)
O
(
S
U
2)  
D
T
A
Y
/N  
IG  
H
T
I
N
1
2
3
4
5
6
7
8
U
P
O
re  
Video In Terminal of Monitor Rear  
Surface  
1.  
2.  
3.  
4.  
A
LA  
R
G
A
M
N
O
U
D
TR  
SH  
T
IG  
5.  
6.  
7.  
8.  
SH  
G
E
U
U
U
R
IN  
S
5
TT  
TT  
H
ER  
ER  
(S  
(S  
(S  
TTE  
1)  
2)  
O
V
R
)
O
U
D
T
A
Y
/N  
IG  
H
T
IN  
BNC cable  
1
2
3
4
5
6
7
8
Video Out Terminal  
Note :  
Connect any power source of AC 24V and DC 12V  
irrespective of polarity.  
12 – DIGITAL COLOR CAMERA  
Download from Www.Somanuals.com. All Manuals Search And Download.  
How to use OSD Menu  
USING ICONS IN THE MENU  
MAIN MENU  
(EXIT)  
ÃÃMAIN MENUÃÃ  
PROFILE  
CAMERA SET  
INTELLIGENCEꢅ  
PRIVACY ZONEꢅ  
OTHER SETꢅ  
Exits the menu setting.  
Before you exits the menu setting, select SAVE to  
save your settings, or select QUIT to cancel.  
wer  
(RET)  
Returns to the previous menu.  
SYSTEM INFOꢅ  
LANGUAGEꢅ  
(HOME)  
Returns to the main menu.  
(SAVE)  
Used to save your settings of MASK AREA,  
PRIVACY ZONE and more.  
Once you save your settings, they will remain  
even if you select QUIT in the menu.  
PROFILE  
You can set a mode according to the camera  
installation conditions.  
(DEL)  
CAMERA SET  
Used to deletes your settings of MASK AREA,  
PRIVACY ZONE and more.  
Once you delete your settings, they will not be  
restored even if you select QUIT in the menu.  
Configure Camera related functions and data.  
INTELLIGENCE  
You can configure the settings of motion  
detection, tracking and more.  
PRIVACY ZONE  
You can configure the privacy related settings.  
OTHER SET  
You can configure for Factory Defaults, and more.  
SYSTEM INFO.  
Displays the system information including the  
camera version and communication settings.  
LANGUAGE  
Select a preferred one from the supported  
languages.  
English 13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
How to use OSD Menu  
PROFILE  
ePROFILEf  
Pr  
M
Ã
STANDARD  
ITS  
WH  
BACKLIGHT  
DAY/NIGHT  
GAMING  
CUSTOM  
D
In the PROFILE menu, you can configure the following camera settings at once.  
CAMERA SET Menu  
STANDARD  
ITS  
BACKLIGHT  
GAMING  
Previous  
Menu  
Sub-menus  
IRIS  
ALC  
-
ALC  
-
ALC  
ALC  
-
ALC  
-
DC  
0
LENS  
DC  
0
DC  
0
DC  
0
LEVEL  
BACKLIGHT  
OFF  
OFF  
-
OFF  
User setting  
allowed  
User setting  
allowed  
User setting  
allowed  
WEIGHT  
WDR LEVEL  
WHITE BAL  
MID  
0
IT  
User setting  
allowed  
User setting  
allowed  
User setting  
allowed  
It w  
User setting  
allowed  
User setting  
allowed  
User setting  
allowed  
User setting  
allowed  
B
AGC  
DNR  
VERY HIGH  
MID  
VERY HIGH-  
MID  
VERY HIGH  
MID  
VERY HIGH  
MID  
It w  
SHUTTER  
XDR  
OFF  
AUTO1/250  
MID  
OFF  
OFF  
MID  
MID  
MID  
G
It w  
14 – DIGITAL COLOR CAMERA  
Download from Www.Somanuals.com. All Manuals Search And Download.  
How to use OSD Menu  
CAMERA SET Menu  
STANDARD  
ITS  
BACKLIGHT  
GAMING  
Previous  
Menu  
Sub-menus  
WHITE BAL  
DAY  
DAY/NIGHT  
DAY  
DAY  
DAY  
-
-
-
-
MODE  
RED  
ATW2  
ATW1  
ATW1  
ATW1  
0
0
2
0
0
2
0
0
2
0
0
2
BLUE  
DETAIL  
ITS  
It will be set automatically so you can easily check the traffic conditions.  
BACKLIGHT  
It will be set automatically so you can distinguish the object from the background in a severe backlighting scene.  
GAMING  
It will be set automatically to help you take a picture in a regular indoor lighting condition.  
English 15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
How to use OSD Menu  
CAMERA SETUP  
CAMERA ID  
[OFF, ON]  
eCAMERA SETf  
CAMERA ID‹  
CAMERA ID  
IRIS  
OFF  
ALCꢅ  
VERY HIGH  
MID  
ABCDEFGHIJKLMNOPQRSTUVWXYZ0  
123456789 :?-+*()/  
AGC  
DNR  
SHUTTER  
SENS-UP  
FLICKERLESS  
XDR  
OFF  
AUTO X4  
OFF  
MID  
OFF  
SPffeeSP LOCATION  
CAMERA-1..................  
DIS  
...........................  
d
c
The CAMERA ID menu is used for you to assign  
a unique name to a camera. If you press the  
SETUP switch with the CAMERA ID menu  
selected, you will see the appropriate screen.  
WHITE BAL  
OFF  
[2]  
INT  
LOW  
OFF  
+
DIGITAL ZOOM  
DETAIL  
V-SYNC  
AGC COLOR SUP  
REVERSE  
POSI/NEGA  
PIP  
You can enter up to 54 alphanumeric or  
special characters for the CAMERA ID. Select  
LOCATION and press the SETUP switch to  
move the display position of the CAMERA ID.  
OFF  
IRIS  
[ALC, ELC]  
The IRIS menu is used if you want to adjust the  
intensity of radiation incoming to the camera.  
Setup the general functions of zoom camera module.  
ALC (Automatic Light Control)  
Use the cdef switch to select a menu item.  
If you press the SETUP switch with an ALC-  
based sub menu selected, you will see the  
appropriate screen.  
ALC‹  
LENS  
LEVEL  
DC  
[00]----I----  
OFF  
EL  
BACKLIGHT  
The LENS menu is used if you select a type of  
the AI lens.  
For normal operation, you must select DC for a  
DC-type lens, and select VIDEO for a VIDEO-  
type lens.  
16 – DIGITAL COLOR CAMERA  
Download from Www.Somanuals.com. All Manuals Search And Download.  
How to use OSD Menu  
ELC‹  
LEVEL  
BACKLIGHT  
[00]----I----  
OFF  
The LEVEL menu is used to adjust the  
overall brightness, where “+” will increase the  
brightness and “–” will decrease it.  
If you set the BACKLIGHT option to BLC,  
you will see a menu where you can set the  
BLC area.  
you can set the desired BLC zone by defining  
the size and location.  
In similar to ALC setting, you can specify the  
ALC‹  
BLC area.  
sign  
ct  
LENS  
DC  
[00]----I----  
BLC  
LEVEL  
BACKLIGHT  
AREA  
ELC‹  
USER  
LEVEL  
BACKLIGHT  
AREA  
[00]----I----  
BLC  
<SIZE>  
<LOCATION>ꢅ  
USER  
<SIZE>ꢅ  
<LOCATION>ꢅ  
D.  
If you use an ordinary camera in a scene  
with an intensive backlight, the object will be  
displayed dark on the monitor affected by the  
backlight. To solve this problem, you can use  
the BLC(Back Light Compensation) function  
to improve the sharpness of the image in  
such a high contrast scene.  
he  
AGC  
[OFF, VERY LOW, LOW, MID, HIGH, VERY  
HIGH, USER]  
LC-  
e
The AGC (Auto Gain Control) menu is used to  
set the AGC level of the camera. When the AGC  
is active, the camera automatically increases the  
sensitivity by amplifying the Video signal when  
the strength of the signal falls below the normal  
value.  
ELC (Electronic Light Control)  
If you press the SETUP switch when the ELCꢅ  
submenu is selected, the corresponding screen  
appears. You can make the ELC (Electronic Light  
Control) function active or not.  
If you press the SETUP switch with a USER  
sub menu selected, you will see the appropriate  
screen.  
e of  
or a  
O-  
English 17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
How to use OSD Menu  
SHUTTER  
AGC USER‹  
[16]  
[OFF, AUTO 1/100(PAL:1/120), AUTO 1/250,  
AUTO 1/500, AUTO 1/1000, AUTO 1/2000, AUTO  
1/4000, AUTO 1/10K , 1/100(PAL:1/120), 1/250,  
1/500, 1/1000, 1/2000, 1/4000, 1/10K , EXT]  
LEVEL  
The SHUTTER menu is used to set the fixed  
high-speed electronic shutter, auto high speed  
electronic shutter and external high speed  
electronic shutter(EXT).  
No  
You can select one of 7 options from 1/100(PAL:1/120)  
to 1/10K for the fixed high speed electronic shutter,  
which is mostly used for imaging a fast moving object.  
In USER mode, you can break down the level in  
16 steps from VERY LOW to VERY HIGH to your  
preference.  
The auto high speed electronic shutter operates  
as the fixed high speed shutter in a high contrast  
scene but automatically focuses the target if the  
iris opens fully in a low contrast scene like in ELC  
mode. When it gets brighter back, the mode will  
switch to the fixed high speed electronic shutter  
mode.  
AGC FIX‹  
LEVEL  
[01]  
A
d
e
b
However, the auto high speed shutter operates  
properly only in a camera featuring a DC or VIDEO  
lens.  
F
If  
1
d
fr  
In external high speed electronic shutter (EXT)  
mode, you can select one of 8 modes from OFF  
through 1/100(PAL:1/120) to 1/10K for the high  
speed electronic shutter. It works as the high  
speed electronic shutter. You can select an  
option using SHUTTER(S0), SHUTTER(S1) and  
SHUTTER(S2) on the rear.  
If you press the SETUP switch with a FIX sub  
menu selected, you will see the appropriate screen.  
X
[O  
As a fixed value of the AGC gain is used in FIX  
mode, you can select one of the 16 detailed levels  
from VERY LOW to VERY HIGH before fixing it.  
A
w
in  
v
Connect each of the terminals to GND.  
.
See the below table for the operation.  
DNR  
[OFF,LOW,MID,HIGH, USER(1~16)]  
S
C
le  
You can configure the DNR (Digital Noise  
Reduction) related settings.  
SHUTTER(S0) SHUTTER(S1) SHUTTER(S2)  
OFF  
Reduces the noise on the screen.  
This is especially useful for a severely distorted  
screen.  
(NTSC: 1/60,  
PAL:1/50)  
OFF  
ON  
OFF  
OFF  
OFF  
OFF  
W
If  
W
1/100  
(PAL:1/120)  
You can set the level if you set DNR to USER.  
DA  
1/250  
1/500  
OFF  
ON  
ON  
ON  
OFF  
OFF  
ON  
In  
R
c
1/1000  
OFF  
OFF  
18 – DIGITAL COLOR CAMERA  
Download from Www.Somanuals.com. All Manuals Search And Download.  
How to use OSD Menu  
WHITE BAL‹  
1/2000  
1/4000  
1/10K  
ON  
OFF  
ON  
OFF  
ON  
ON  
ON  
ON  
ON  
DAY/NIGHT  
MODE  
DAY  
AWCꢅ  
UTO  
0,  
RED  
[00]----I----  
[00]----I----  
[0248]  
BLUE  
R-GAIN  
B-GAIN  
[0247]  
Note :  
d
If IRIS mode is set to ELC, the SHUTTER menu will be  
deactivated as you adjust the brightness using the  
electronic shutter.  
/120)  
r,  
If the SENS-UP function is set to AUTO, only items of  
Note :  
OFF and AUTO are available in the SHUTTER menu.  
ect.  
You can set the values of R-GAIN and B-GAIN only in  
AWC mode.  
If the FLICKERLESS function is set to ON, the SHUTTER menu  
will be deactivated.  
es  
ast  
e
LC  
will  
er  
If AGC is set to OFF or FIX, you can not access the  
NIGHT menu.  
Automatically detects the ambient level of  
darkness in the dark or low contrast scene to  
extend the accumulated time, keeping the image  
bright and sharp;  
For adjusting the white balance, the following  
5 modes are provided:  
ATW1(Auto Tracing White Balance mode  
1): The camera can automatically adjust the  
color temperature in real time, according to  
the ambient conditions. The color temperature  
ranges from approx. 2500K to 9300K.  
s
FLICKERLESS  
[OFF, ON]  
DEO  
If set to ON, the shutter speed will be fixed to  
1/100(PAL:1/120) second. This will prevent possible screen  
distortion due to a mismatch between the vertical sync  
frequency and the blinking frequency of the lighting.  
ATW2: The color temperature ranges from  
FF  
h
approx. 2,000K to 10,000K.  
AWC ( Auto White Balance Control): If you  
press the SETUP switch in the appropriate item  
position, Auto White Balance will perform once.  
XDR (eXtended Dynamic Range)  
[OFF, LOW, MID, HIGH]  
d
Actively controls the gamma compensation in the  
way it operates the ambient luminance contrast  
in a certain pixel unit to determine the optimal  
visibility.  
3200K : Set color temperature to 3200K  
5600K : Set color temperature to 5600K  
RED : Adjusts the strength of the red color.  
Select one from OFF, LOW, MID and HIGH.  
Closing to HIGH will increase the compensation  
level.  
BLUE : Adjusts the strength of the blue color.  
R(S2)  
R-GAIN/B-GAIN : Enables you to set the current  
color temperature manually.  
F
WHITE BAL  
[DAY/NIGHT]  
BRIGHTNESS : Select a brightness level in  
switching from setting in DAY mode to setting in  
NIGHT mode.  
If you want to adjust the color scheme, use the  
WHITE BALANCE function.  
F
DAY  
F
F
In DAY mode, you can set the color values of  
RED and BLUE. The screen will be displayed in  
colors according to your settings.  
English 19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
How to use OSD Menu  
DIGITAL ZOOM  
[ON/OFF]  
REVERSE  
[OFF, H, V, H/V]  
INT  
You can set the digital zoom factor and position.  
If you press the SETUP switch with the DIGITAL  
ZOOM function set to ON, you will see the  
appropriate screen.  
Mirrors video signals horizontally, vertically, or  
both.  
POSI/NEGA  
[+, -]  
Output as it is or mirror the video brightness  
signal.  
When the zoom factor and position are defined,  
the digital zoom function will operate.  
PIP  
[OFF, ON]  
DIGITAL ZOOM‹  
Displays a sub image together with the main  
image on the same screen using the Picture In  
Picture function.  
RATIO  
[X1.0]  
< LOCATION >  
You  
INTE  
Note :  
If more than one privacy zone is set and the PRIVACY  
SET is set to ON, the PIP function will be deactivated.  
M
If the INTELLIGENCE function is set to FENCE mode, the  
PIP menu will be deactivated.  
TR  
De  
DIS  
[OFF, ON]  
-
LOCATION : If you press the SETUP switch in the  
condition where the image is enlarged as much as the  
ratio setting, you can watch an invisible area of the  
effective screen as well using the cdef switch.  
Digital Image Stabilization will set the anti-shake  
compensation.  
DE  
De  
Note :  
Note :  
If you set DIS to ON, the compensation area will be  
enlarged as set in the digital zoom factor.  
If you set the digital zoom factor to greater than the  
enlarged zoom factor for the compensation, the DIS  
function will be deactivated.  
M
S
The DIGITAL ZOOM function enlarges the pixel itself, which can  
cause deterioration of the quality.  
S
p
DETAIL  
[0~3]  
Controls the horizontal or vertical distinction.  
V-SYNC  
[INT, LINE]  
Select the vertical sync mode for INT or LINE.  
If you select INT, the camera will use the internal  
synchronization.  
If selecting LINE, the camera will use the external  
power source frequency for the synchronization.  
You can adjust the LL-PHASE.  
Note :  
D
Use of DC 12V will fix V-SYNC to INT, which can not be  
changed.  
W
fu  
d
AGC COLOR SUP  
[LOW , MID, HIGH]  
Adjust the color scheme according to the AGC  
value.  
S
20 – DIGITAL COLOR CAMERA  
Download from Www.Somanuals.com. All Manuals Search And Download.  
How to use OSD Menu  
Set the sensitivity of the motion detection.  
INTELLIGENCE  
r
RESOLUTION  
[1~5]  
eINTELLIGENCEf  
MOTION  
MASK AREA  
DISPLAY  
SENSITIVITY  
RESOLUTION  
ALARM OUT  
OFF  
2 3 4  
ON  
If setting it to high, the camera can detect even a  
trivial movement of the target.  
1
[4]  
[5]  
ALARM OUT  
If you set a desired menu item to ON, the camera  
will sound an alert if it detect the appropriate  
motion.  
n
You can set the motion detection and tracking in the  
INTELLIGENCE menu.  
ALARM OUT‹  
Y
d.  
MOTION  
ON  
MOTION  
[OFF,TRACKING,DETECTION]  
the  
TRACKING  
Detects and tracks a moving object.  
DETECTION  
Detects a moving object.  
MASK AREA [1~4]  
Specify a detection exception area to mask.  
Select a mask number and specify the size and  
position.  
MASK AREA‹  
<SIZE>  
<LOCATION>ꢅ  
DISPLAY  
[ON, OFF]  
With the DISPLAY option set to ON, a motion  
function will be displayed on the screen, if  
detected.  
SENSITIVITY  
[1~7]  
English 21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
How to use OSD Menu  
PRIVACY ZONE SETUP  
OTH  
PRIVACY ZONE SET1‹  
PIXEL LEVEL [4]  
<POINT>ꢅ  
<POSITION>ꢅ  
ePRIVACY ZONEf  
1
2
3
4
5
6
7
8
9
10 11 12  
PRIVACY SET  
STYLE  
ON  
MOSAIC1  
- How to set the point  
You can set each position of the 4 points.  
The PRIVACY function will protect your privacy by  
screening the privacy area that you have specified  
during monitoring. You can specify up to 12 privacy  
zones.  
If you press the SETUP switch in <POINT>,  
you will see the points available in the  
F
A
d
PRIVACY ZONE. Each time you press the  
SETUP switch, the points available will move.  
If you set the PRIVACY SET to ON, your PRIVACY  
ZONE settings will be applied.  
Use the cdef switch to set the position  
of each point. Set each position of the four  
points and press the SETUP switch to  
complete the positioning.  
O
You can change the style to adjust the mosaic size  
and color of the PRIVACY ZONE.  
Y
C
- How to set the position  
ePRIVACY ZONEf  
You can move the position of the overall area.  
1
7
2
8
3
9
4
5
6
By pressing the SETUP switch in  
<POSITION>, you can move the overall  
position of the privacy zone.  
10 11 12  
PRIVACY SET  
STYLE  
Y-LEVEL  
RED  
BLUE  
ON  
COLOR  
[128]  
[128]  
[128]  
Use the cdef switch to move the  
position and press the SETUP switch to  
confirm it.  
Note :  
If more than one PRIVACY ZONE is specified and the  
PRIVACY SET is set to ON, the PIP function will be  
deactivated.  
Use the cdef switch to select one from  
PRIVACY 1 through 12.  
If the 12th PRIVACY ZONE is specified, the LINE function  
of FENCE will be deactivated.  
Select one from PRIVACY 1~12 and press the  
SETUP switch to confirm your setting. You can  
specify a pixel that moves as you change the PIXEL  
LEVEL to set the position.  
22 – DIGITAL COLOR CAMERA  
Download from Www.Somanuals.com. All Manuals Search And Download.  
How to use OSD Menu  
SYSTEM INFORMATION  
OTHER SET  
eOTHER SETf  
FACTORY DEFAULTS  
OSD COLOR  
eSYSTEM INFOf  
BW  
TYPE  
3_BOX_WDR_N  
SERIAL NO. 000000000000000  
CAMERA VER.  
0.50_090101  
You can view the system information including,  
camera version  
T>,  
FACTORY DEFAULTS  
All the settings will be restored to the factory  
default.  
e
ove.  
LANGUAGE  
tion  
ur  
OSD COLOR  
[BW, R/G/B]  
eLANGUAGEf  
You can set the OSD(On-screen Display) color to  
COLOR or B/W.  
ÃENGLISH  
FRANÇAIS  
ESPAÑOL  
日文  
a.  
INGLÊS  
The camera supports 5 different languages.  
Select a preferred language.  
e
ction  
English 23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
How to use OSD Menu  
S
SPE  
Initial Configuration Table  
Camera Configuration  
CAMERA ID  
OFF  
ALC  
VERY HIGH  
MID  
IRIS  
AGC  
DNR  
SHUTTER  
FLICKERLESS  
XDR  
OFF  
OFF  
MID  
DIGITAL ZOOM  
DETAIL  
OFF  
[2]  
AGC COLOR SUP  
REVERSE  
POSI/NEGA  
PIP  
MID  
OFF  
+
OFF  
DIS  
OFF  
24 – DIGITAL COLOR CAMERA  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
SPECIFICATIONS  
Items  
Camera Type  
Sub-items  
SCC-B1331N  
CCTV Camera (WDR & DAY/NIGHT)  
Device  
1/3” Super-HAD IT CCD  
811 x 508  
Image  
Total  
Pixels  
Effective  
768 x 494  
System  
Scanning Line  
Frame  
Interlace/Progressive  
525 lines  
30frame/1sec  
15,734 Hz  
Scanning  
Internal Mode  
Line-lock Mode  
Internal Mode  
Line-lock Mode  
Condition  
Horizontal  
Frequency  
15,750 Hz  
59.94 Hz  
Vertical  
Frequency  
60 Hz  
Min. Scene illumination  
Sens-up  
OFF  
OFF  
F No.  
1.2  
1.2  
Level  
DAY  
0.4  
0.24  
NIGHT  
0.4  
0.24  
Min. Scene  
Illumination  
50  
30  
IRE  
IRE  
Lux  
Lux  
Lux  
Lux  
OFF  
1.2  
15  
IRE  
0.12  
Lux  
0.12  
Lux  
Number of Privacy Zone  
12 (Polygonal Method)  
OFF/Tracking/Detection  
Off/On (Level Setting)  
x1 ~ x16 (x0.1 STEP)  
Off/On  
Motion Detection  
eXtended Dynamic Range(XDR)  
D-Zoom  
PIP  
High Speed Shutter  
Flickerless  
1/60 ~ 1/10Ksec (OSD/External Control)  
Off/On  
Sens-Up  
x2 ~ x512  
BLC  
Off/On (Area Setting)  
Off/On (Max.Level Setting)  
Off/On ( ~ 1/200K sec)  
Off/On (Phase Control)  
Off/On (Max.54ea/2Line)  
ATW1/ATW2/AWC/3200K/5600K  
Off/On (Adaptive 3D+2D)  
Off/On  
Functions  
AGC  
ELC  
Line Lock  
Camera ID  
White Balance  
Digital Noise Reduction(DNR)  
Digital Image Stabilization(DIS)  
Intelligent Video  
Etc. Function  
Horizontal  
Fixed/Moved, Fence  
Detail, Reverse(H/V), Posi/Nega  
600 TV Lines  
Resolution  
Vertical  
350 TV Lines  
Video Output  
S/N Ratio  
-
VBS 1.0Vp-p, 75 Ω  
Approx. 52dB  
S/N Ratio  
English 25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Items  
Sub-items  
Lens Drive Type  
Mount Type  
Input  
SCC-B1331N  
MANUAL/AI(VIDEO/DC)  
CS/C  
Lens  
N/A  
Alarm  
Output  
1 Output  
Remote  
Control  
Coaxitron (Data On Coax cable)  
Yes (with SCX-RD100)  
Operating Temperature  
Humidity  
-10˚C ~ +50˚C  
Less than 90%  
Environmental  
Conditions  
AC24V 10%(60Hz 0.3Hz)  
DC12V 10%  
Power Requirement  
Power  
In normal operation : 2.6W  
In switching the DAY/NIGHT filter : 3.2W  
Yes  
Power Consumption  
(With DC Lens)  
LED Indicator  
Net  
64(W) x 58(H) x 109.2(D) mm  
173(W) x 99(H) x 115(D) mm  
Dimensions  
(WxHxD)  
Package  
Physical  
Specification  
Net  
Weight  
305g  
530g  
Silver  
Package  
Color  
Body  
26 – DIGITAL COLOR CAMERA  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Items  
Sub-items  
SCC-B1331P / SCC-B1031P  
Camera Type  
CCTV Camera (WDR & DAY/NIGHT)  
Device  
1/3” Super-HAD IT CCD  
795 x 596  
Image  
Total  
Pixels  
Effective  
752 x 582  
System  
Scanning Line  
Frame  
Interlace/Progressive  
625 lines  
25frame/1sec  
15,625 Hz  
Scanning  
Internal Mode  
Line-lock Mode  
Internal Mode  
Line-lock Mode  
Condition  
Horizontal  
Frequency  
15,625 Hz  
50 Hz  
Vertical  
Frequency  
50 Hz  
Min. Scene illumination  
Sens-up  
OFF  
OFF  
F No.  
1.2  
1.2  
Level  
DAY  
0.4  
0.24  
NIGHT  
0.4  
0.24  
Min. Scene  
Illumination  
50  
30  
IRE  
IRE  
Lux  
Lux  
Lux  
Lux  
OFF  
1.2  
15  
IRE  
0.12  
Lux  
0.12  
Lux  
Number of Privacy Zone  
Motion Detection  
eXtended Dynamic Range(XDR)  
D-Zoom  
12 (Polygonal Method)  
OFF/Tracking/Detection  
Off/On (Level Setting)  
Max. x16  
PIP  
Off/On  
High Speed Shutter  
Flickerless  
1/50 ~ 1/10Ksec (OSD/External Control)  
Off/On  
Sens-Up  
x2 ~ x512  
BLC  
Off/On (Area Setting)  
Off/On (Max.Level Setting)  
Off/On ( ~ 1/200K sec)  
Off/On (Phase Control)  
Off/On (Max.54ea/2Line)  
ATW1/ATW2/AWC/3200K/5600K  
Off/On (Adaptive 3D+2D)  
Off/On  
Functions  
AGC  
ELC  
Line Lock  
Camera ID  
White Balance  
Digital Noise Reduction(DNR)  
Digital Image Stabilization(DIS)  
Intelligent Video  
Etc. Function  
Fixed/Moved, Fence  
Detail, Reverse(H/V), Posi/Nega  
English 27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Items  
Image  
Sub-items  
Device  
SCC-B1331P / SCC-B1031P  
1/3” Super-HAD IT CCD  
600 TV Lines  
Horizontal  
Resolution  
Vertical  
350 TV Lines  
Video Output  
S/N Ratio  
-
S/N Ratio  
VBS 1.0Vp-p, 75 Ω  
Approx. 52dB  
MANUAL/AI(VIDEO/DC)  
CS/C  
Lens Drive Type  
Mount Type  
Lens  
Input  
N/A  
Alarm  
Output  
1 Output  
Coaxitron (Data On Coax cable)  
RS-485  
Yes (with SCX-RD100)  
Yes (Multi Protocol, 8ea)  
-10˚C ~ +50˚C  
Less than 90%  
Remote  
Control  
Operating Temperature  
Humidity  
Environmental  
Conditions  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Pyramid Technologies Power Supply PS32LAB User Guide
Quatech Network Card DSCLP SSCLP 100 User Guide
RCA MP3 Player H104 User Guide
Rival Toaster TO 709 User Guide
Rolls Stereo Amplifier PM50s User Guide
Runco Flat Panel Television XP 50DHD, XP 50DHDxa, XP 65DHD, XP 65DHDxa, XP 103DHD User Guide
Samsung Microwave Oven SMH1927W User Guide
Sanyo Barcode Reader PLC XU75 User Guide
Schwinn Home Gym 130 230 User Guide
SECO LARM USA Car Satellite TV System SK 910R3 4Q User Guide