MF68-00271A
DIGITAL TERRESTRIAL RECEIVER
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY INSTRUCTIONS
This STB has been manufactured to satisfy international safety standards.
Please read the following recommended safety precautions carefully.
MAINS SUPPLY:
AC 100~240V 50/60Hz
OVERLOADING:
Do not overload wall outlets, extension cords or adapters
as this can result in fire or electrical shock.
LIQUIDS:
Keep liquids away from the STB.
CLEANING:
Before cleaning, disconnect the STB from the wall socket.
Use a cloth lightly dampened with water(no solvents) to
clean the exterior.
VENTILATION:
Do not block the STB ventilation holes. Ensure that free airflow
is maintained around the STB. Never store the STB where it is
exposed to direct sunlight or near heating euipment e.g. a
radiator.
Never stack other electronic equipment on top of the STB.
Place the STB at least 30mm from the wall.
ATTACHMENTS:
Do not use any attachment that is not recommended by the
manufacturer; it may cause a hazard or damage the equipment.
CONNECTION TO THE CABLE TV SIGNAL AND TV:
Connect all components before plugging any power cords into the wall
outlet. Always turn off the STB, TV and other components before you
connect or disconnect any cables.
SERVICING:
Do not attempt to service this product yourself.
Any attempt to do so will make the warranty invalid.
Refer all servicing to a qualified service agent.
LIGHTNING:
If the STB is installed in an area subject to intense lightning
activity, protection devices for the STB mains connector and
modem telephone line are essential.
The individual manufacturer’s instruction for safeguarding other
equipment, such as TV set, Hi-Fi, etc., connected to the STB must
also be followed during lightning storms.
GROUNDING:
CATV cable MUST BE EARTHED.
The grounding system must comply with SABS 061.
Note :
Dispose the used batteries at designated place for environment protection
D
I
G
I
T
A
L
T
E
R
R
E
S
GB-2
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY INSTRUCTIONS
WARNING!
1. Follow these directions in order not to damage the power cord or plug.
" Do not modify or process the power cord or plug arbitrarily.
" Do not bend or twist the power cord too much.
" Make sure to disconnect the power cord with holding the plug.
" Separate heat appliances from the power cord as distance as possible in order
to prevent the cover from being melted.
2. Failure to follow one of them may cause electrical shock.
" Do not open the main body.
" Do not insert metals or inflammable objects inside the product.
" Do not touch the power plug with a wet hand.
" Disconnect the power cord in case of lightening.
" Do not cover the receiver’s ventilation openings with items such as newspapers,
clothes etc.
" Do not place the receiver on top of household appliances that emit heat.
3. Do not use the product when it is out of order. If you continue to use
the product with a defect, it can cause a serious damage to the product.
Make sure to contact your local product distributor when the product is
out of order.
T
R
I
A
L
R
E
C
E
I
V
E
R
GB-3
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENT
Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
General Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Connecting Your DTB-9401F. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Remote Control Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Basic Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Operating The Receiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Main Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
1. Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
1.1 Manual Scanning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
1.2 Auto Scanning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
1.3 Reset to Factory Defaults . . . . . . . . . . . . . . . . . . . . . . . . . . 19
2. Channel Organising . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
2.1 Delete Frequency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
2.2 Delete Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
2.3 Delete All Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
2.4 Delete Scrambled Channels . . . . . . . . . . . . . . . . . . . . . . . . 21
2.5 Favorite Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
2.6 Move & Edit Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
3. Parental Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
3.1 Set Channel Lock. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
3.2 Change PIN Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
4. System Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
4.1 Language Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
4.2 OSD Setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
4.3 Media Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
4.4 Time &Timer Setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
4.5 System Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
4.6 Software Upgrade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Technical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
D
I
G
I
T
A
L
T
E
R
R
E
S
GB-4
Download from Www.Somanuals.com. All Manuals Search And Download.
GENERAL FEATURES
1. USER SECTION
400 PROGRAMMABLE CHANNELS
ADVANCED ELECTRONIC PROGRAM GUIDE
MULTI LANGUAGE SUPPORTED FOR OSD
SUBTITLE & TELETEXT(OSD & VBI) SUPPORTED
WITH MULTI LANGUAGE
FULL FUNCTION INFRARED REMOTE CONTROL UNIT
AUTO AND MANUAL SCAN FACILITY
CHANNEL ORGANIZING (PROGRAMMABLE)
LOW POWER CONSUMPTION
AUTO UPDATED EPG
2. TUNER SECTION
3. VIDEO SECTION
50~860 MHz WIDE BAND TUNER
RF LOOP-THROUGH OUTPUT(MALE) FOR ANALOG RECEIVER
DVB-T COMPLIANT
MPEG-2 VIDEO(MP@ML)
COMPATIBLE FOR BOTH SCPC/MCPC
SUPPORTS ASPECT RATIO 4:3(NORMAL) AND
16:9(WIDE SCREEN)
FFT: 2K OR 8K
2SCART
4. AUDIO SECTION
MPEG 1 AUDIO LAYER I & II
MONO, DUAL, STEREO AND JOINT STEREO AUDIO MODE
32, 44.1 AND 48 KHz SAMPLING FREQUENCIES
VOLUME CONTROL AND MUTE FUNCTION THROUGH
REMOTE CONTROL UNIT
SPDIF DIGITAL AUDIO OUTPUT
T
R
I
A
L
R
E
C
E
I
V
E
R
GB-5
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTING YOUR “DTB-9401F”
1. LOCATION OF THE RECEIVER
Your DTB-9401F should be placed under proper ventilation.
Don’t put in completely enclosed cabinet that will restrict the flow of air,
resulting in overheating.
The location should be safeguarded from direct sunlight, excess moisture,
rough handling or household pets.
Avoid stacking other electronic components on the top of the receiver.
The location should be safely accessible by the cable from your antenna system.
2. CONNECTING THE RECEIVER WITH AERIALS
You can connect the receiver to the following type of aerials:
" Use a standard outdoor roof aerial intended for receiving channels between
VHF and UHF.
" Because many older roof-mounted aerials may only receive a limited number
of channels, it is difficult or impossible to receive digital channels transmitted
on higher frequencies. If so, you may replace the roof aerial.
" Some outdoor aerials are directed towards an analogue transmitter.
The aerial must be directed towards a digital TV transmitter.
" It is not desirable to use indoor or window mounted aerials,
as it will be difficult or impossible to receive digital channels.
3. CONNECTING THE RECEIVER TO TV
To connect the receiver with your television, you can use Scart Cable.
In the case of connecting your TV through SCART cable,
connect the SCART connector marked TV to the respective SCART port on the TV.
4. CONNECTING YOUR VCR
To connect a VCR, the DTB-9401F has been provided with SCART
at the rear marked “AV2(EXT)”.
Using a SCART connector, the VCR can be connected to the receiver.
D
I
G
I
T
A
L
T
E
R
R
E
S
GB-6
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTINGYOUR “DTB-9401F”
Connecting Figure
Note : In some region, the digital terrestrial signal may be weak.
So you’d better use the antenna in which the booster was built, for watching
the weak signal channels.
T
R
I
A
L
R
E
C
E
I
V
E
R
GB-7
Download from Www.Somanuals.com. All Manuals Search And Download.
DESCRIPTION
Front Panel
1
2
1. Infrared Sensor
2. LED
This is to receive the IR commands from the Remote Control Unit.
When the LED light Red, the set-top box enters the standby mode.
When the LED light Green, it enters the operation mode.
D
I
G
I
T
A
L
T
E
R
R
E
S
GB-8
Download from Www.Somanuals.com. All Manuals Search And Download.
DESCRIPTION
Rear Panel
6
5
4
3
2
1
1. AC MAINS
This is to plug in the AC mains power cord.
The input AC voltage range is 100V to 240V, 50Hz/60Hz supply.
2. DIGITAL AUDIO OUT
3. AV2(EXT)
Output for connection to a digital amplifier.
This is used to connect to your VCR.
This is used to connect to your TV.
4. AVI(TV)
5. ANT. LOOP
6. ANT. IN
This is used to connect other receiver.
This is used to connect a terrestrial antenna.
T
R
I
A
L
R
E
C
E
I
V
E
R
GB-9
Download from Www.Somanuals.com. All Manuals Search And Download.
DESCRIPTION
Remote Control Unit
Note : When inserting batteries, make sure that the polarity(+/-) is correct.
1. POWER
This is used to switch the receiver ON/STANDBY mode.
2. 0-9 Numerical keys
These keys are to enter numeric values and to select the channel
directly by entering its number.
3. Pg+/Pg-
These keys are used to move up or down pages the menu.
4. TV/RADIO
This key is used to toggle between the TV channel and Radio channel.
D
I
G
I
T
A
L
T
E
R
R
E
S
GB-10
Download from Www.Somanuals.com. All Manuals Search And Download.
DESCRIPTION
5. MUTE
6. FAV
This key is used to toggle between normal & muted audio.
Use the key to switch between favorite lists.
7. EPG
8. LAST
Electronic Program Guide button displays the TV/Radio Program guide.
This key is used to call up directly whatever channel you were
watching list.
9. TEXT(green)
10. ALT(yellow)
11. AUDIO(blue)
This key is used to select the subtitle mode.
This button functions same as the green button on the menu.
Press once and subtitle appears. You can select the language you
want using the CH+/CH- keys.
Press twice and Teletext with OSD appears.
Press three times and Teletext with VBI appears.
This key is used to select the soundtrack list for the current service.
This button functions same as the yellow button on the menu.
Press once and sound track appears.
Press twice and video track appears.
The sound and video track services are not provided for every
channel and depend on the conditions the operator is in.
This key is used to change the Audio to the left, right or both channels.
This button functions same as the blue button on the menu.
12. INFORMATION This key is used to display the programe information box in the screen.
(red)
This button functions same as the red button on the menu. Press
once and you can get simple information on the program. Press twice
and you can get detailed information on the channel in text box.
13. MENU
14. EXIT
15. OK
This key is used to open up the menu or return to the previous menu.
This key is used to exit a menu or return to the previous menu.
This key is used to enter and confirm any data to the receiver in the
menu system. This key is used to select the item. Press while viewing
TV and a list of channels is displayed.
16. CH+/CH-
These keys are used to change channels.
These keys are used to move the cursor to the up/down menu option.
17. VOL+/VOL-
These keys are used to increase or decrease the volume.
These keys are used to move the cursor to the left/right menu option.
T
R
I
A
L
R
E
C
E
I
V
E
R
GB-11
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC FUNCTIONS
1. Display Screen
Before you can view the television program, you must perform the installation.
Therefore you will see only menu images at first.
After the television channels have been programmed, you will see the following picture(banner)
each time you switch channels:
Channel Number
Signal Status
Program Information Current Favorite
The number of soundtrack in current channel
● Press the red( i ) key in view mode.
ᮡ
ᮢ
● Select the channel by pressing the Numerical 0~9 keys or
TV/RADIO key to move to TV or Radio channel.
/
keys and select the
You will also see this picture each time you change channels.
When you press the TV/RADIO key on the Remote Control Unit, TV and Radio program are
toggled.
Detailed program information
● Press the red( i ) key twice while you are viewing a program.
First you will see the banner described above.
After the red( i ) key is pressed in the second time, detailed information for current program can
be displyed on another banner, if there is more information. When this information is more than
one page, Pg+/Pg- can be used for page up and down.
Note : This service depends on service provider.
2. Volume Control
To control the volume level :
ᮤ
ᮣ
● Press the
/
keys to adjust the volume level.
● Press the MUTE key to turn to silence mode.
ᮤ
ᮣ
● Press the MUTE key again or
/
keys in order to cancel the mute function.
D
I
G
I
T
A
L
T
E
R
R
E
S
GB-12
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC FUNCTIONS
3. Select Soundtrack
● Press the ALT(yellow) key to see the soundtrack list.
ᮡ
ᮢ
● Press the
/
and OK key to select one.
4. Select Videotrack
● Press the ALT(yellow) key twice to see the videotrack list.
ᮡ
ᮢ
● Press the
/
and OK key to select one.
5. Service List
● Press the OK key to while you are viewing a program.
● Select list by pressing the TV/RADIO or FAV key.
The icon
scrambled channel, and the
channel name symbolises lock channel.
behind the channel name symbolises
icon behind the
ᮡ
ᮢ
● Select the channel by pressing the
/
, Pg+/Pg-.
● Press the OK key to watch that channel.
The colour key corresponds the following service list.
● Green(TEXT) key : Favorites
● Yellow(ALT) key : Alphabetical
● Blue(AUDIO) key : Provider
● Red( i ) key
: Frequency
T
R
I
A
L
R
E
C
E
I
V
E
R
GB-13
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC FUNCTIONS
5.1 Service Favorites
● Press the green(TEXT) key on the control unit to select the
Favorites list.
● Press the green(TEXT) key to toggle group and channel list.
ᮡ
● Use the
you want.
ᮢ
/
, Pg+/Pg- keys to select a favorite group that
5.2 Service Alphabetical
● Press the yellow(ALT) key on the remote control unit to select
the Alphabetical list.
● Press the yellow(ALT) key to toggle group and channel list.
ᮡ
ᮢ
● Use the
/
, Pg+/Pg- keys to select a Alphabetical group
that you want.
5.3 Service Provider
● Press the blue(AUDIO) key on the remote control
unit to select the Provider list.
● Press the blue(AUDIO) key to toggle group and channel list.
ᮡ
● Use the
you want.
ᮢ
/
, Pg+/Pg- keys to select a Provider group that
5.4 Service Frequency
● Press the red( i ) key on the remote control unit to select the
Frequency list.
● Press the red( i ) key to toggle group and channel list.
ᮡ
ᮢ
● Use the
/
, Pg+/Pg- keys to select a Frequency group
that you want.
D
I
G
I
T
A
L
T
E
R
R
E
S
GB-14
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC FUNCTIONS
6. Program Information
EPG-Electronic Program Guide
The electronic program guide gives you a channel list for the
channels.
Note : 1. This service depends on service provider.
2. After receiver recognized the GMT-time from the
signal which takes few seconds, it can display
correct EPG information.
● Press the EPG key while you are viewing a program.
This function is displayed on the screen by using only time.
● GREEN(TEXT) key : Green key is for moving back to the previous date.
● YELLOW(ALT) key : Yellow key is for moving to the next coming date.
● RED( i ) key
: This key is used to watch the program information, if there is more
information than one page. Use the Pg+/Pg- keys to move up and
down pages.
ᮤ
ᮣ
●
/
key
: Use to display the program list by 30 minutes per block.
Time interval can be adjusted by press keys as followings on EPG screen:
1 Key: 1 hour and 30 minutes 2 key: 30 minutes 3 key: 15 minutes
With the TV/RADIO or FAV key you can browse among the various programs lists.
ᮡ
ᮢ
● Select the channel by pressing the
/
, Pg+/Pg- keys and press the OK key to watch
this channel.
7. Subtitle
When the current broadcasting program provides subtitle,
press the TEXT key to see the current subtitle language list.
If Subtitle is available on current program, [S] is displayed on
the banner after changing program(channel) or pressing the
red( i ) key.
To change the subtitle language:
● Press the TEXT key to see the subtitle language List.
ᮡ
ᮢ
● Use the
/
keys to select a subtitle language you want.
● Press the OK key and then the subtitle language you want is displayed.
The menu display is carefully created and user friendly to assure the easy operation
of the receiver by the user.
T
R
I
A
L
R
E
C
E
I
V
E
R
GB-15
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC FUNCTIONS
8. Teletext OSD
When the current broadcasting program provides Teletext OSD,
press the TEXT key twice to see the current Teletext OSD list.
To change the Teletext OSD:
ᮡ
ᮢ
● Use the
/
keys to select a Teletext OSD you want.
● Press the OK key and then the Teletext OSD you want is
displayed on the screen.
9. Teletext VBI
When the current broadcasting program provides
Teletext VBI, press the TEXT key three times to see the
current Teletext VBI list.
To change the Teletext VBI:
ᮡ
ᮢ
● Use the
/
keys to select a Teletext VBI you want.
● Press the OK key and then the Teletext VBI you want is
displayed on the screen.
Note : A television with TV functions supported shall be used.
The system shall operate with the subtitle turned off.
10. Audio Mode
You can choose a mode among left, right or stereo using the
AUDIO key.
To change the audio mode:
● Press the AUDIO key to select the left, right or stereo.
● Press the EXIT key to save and escape from this menu.
D
I
G
I
T
A
L
T
E
R
R
E
S
GB-16
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING THE RECEIVER
Main Menu
After installing your antenna system and DTB-9401F with appropriate connectors.
● Plug in the AC main power and switch on the receiver.
● Press the MENU key to bring up the main menu.
The following on screen display will appear:
The sub menu topics will be displayed from 1 to 4.
For the sub-menus 1, 2 and 3 you need the PIN Code.
1. Installation
This menu consists of 3 sub-menus:
Manual Scanning, Auto Scanning and Reset to Factory Default.
● Select “Installation” in the main menu mode to
select the sub menu.
● Enter the PIN Code.
If you have not entered your own PIN Code then the
PIN Code 0000 applies, which was set at the factory.
T
R
I
A
L
R
E
C
E
I
V
E
R
GB-17
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING THE RECEIVER
1.1 Manual Scanning
To tune-in new channels and weak signals, the DTB-9401F has been provided with the
option “Manual Scanning” where the channel data can be entered by the user.
After selecting the “Manual Scanning” from the Installation Menu, the following screen
will be displayed:
● Select the channel which you want to find.
● Input the frequency of the channel you want to find.
● Select the bandwidth.
You can select the value of 6, 7 or 8 MHz.
● Select the FFT (Fast Fourier Transform) Mode.
You can select the value of 2K or 8K.
● After select option, press the OK key to start the
scanning process.
D
I
G
I
T
A
L
T
E
R
R
E
S
GB-18
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING THE RECEIVER
1.2 Auto Scanning
The sub menu “Auto Scanning” will enable download of the channels automatically
from the preprogrammed load.
To download channels automatically:
● Select the region which is possible in your
location for Auto search.
● You can select All or Only Free option mode.
All : Scanning all the channels
Only Free : Scanning free channels
● Select the FFT (Fast Fourier Transform) Mode.
You can select the value of 2K or 8K.
● Setting the maximum or minimum frequency.
● Press the OK key.
Auto Scanning menu will be displayed.
All the channels in the list will be automatically downloaded.
1.3 Reset to Factory Defaults
This to restore the factory set values in case the user
has encountered some problems after changing any values of
channel data and others which may be in error.
At the request window,
if you press the OK key, the receiver will be reset to factory
default settings automatically.
Note : This cause your previous settings to be deleted!
T
R
I
A
L
R
E
C
E
I
V
E
R
GB-19
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING THE RECEIVER
2. Channel Organising
The “Channel Organising” menu has six functions:
The “Channel Organising” menu is used to delete the
Frequencies and Channels or to make Favorite channels
or move channel as you want.
● Enter the PIN Code.
If you have not entered your own PIN Code PIN Code 0000
applies, which was set at the factory.
2.1 Delete Frequency
● Select the desired frequency list you want to delete by
pressing red( i ) key.
● Press the OK key for confirmation.
Note : This feature doesn’t delete frequency itself but
deletes the list of channels registered for frequency.
2.2 Delete Channel
● Select the desired channel you want to delete by pressing
the red( i ) key.
● Press the OK key for confirmation.
D
I
G
I
T
A
L
T
E
R
R
E
S
GB-20
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING THE RECEIVER
2.3 Delete All Channels
At the request window, press the OK key to delete
all channels and press the MENU / EXIT to exit.
2.4 Delete Scrambled Channels
At the request window, press the OK key to delete
scrambled channels and press the MENU / EXIT to exit.
2.5 Favorite Channels
You can immediately register the present channel to
the desired Favorite Group.
In addition, you can register a channel to multiple favorite
groups.
● Select the desired Favorite Group(FAV1~FAV9)
using the FAV key.
ᮡ
ᮢ
● Select the desired channel list using the
/
or
Pg+/Pg- keys at the TV or RADIO list window.
● Press the red( i ) key and then register the selected
channel at the Favorite Group.
● Then press the OK key for confirmation.
You can change TV list or Radio list by the TV/RADIO key and
change favorite list by the FAV key.
● When you press the TV/RADIO key, TV list and Radio list are toggled.
● Press the FAV key to select another favorite list.
To delete channels from Favorite Group:
ᮡ
ᮢ
● Select a channel list to delete with
/
or Pg+/Pg- keys.
● Press the red( i ) key to delete the selected channel from the favorite channels.
T
R
I
A
L
R
E
C
E
I
V
E
R
GB-21
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING THE RECEIVER
2.6 Move & Edit Channel
ᮤ
ᮡ
ᮣ
ᮢ
● Select the TV/RADIO list with
/
/
keys.
● Select the TV/RADIO list with
or Pg+/Pg- keys.
● Select channel by pressing the red( i ) key.
ᮡ
ᮢ
● Press the
/
or Pg+/Pg- keys to change the
position of the channel you want, and press the
OK key for confirmation.
● If you want to return the channel to the initial position,
do not press the OK key but press the blue(AUDIO) key.
To edit Channel Name
ᮤ
ᮣ
● Select the TV/RADIO list with
/
keys.
● Select a channel list to move to other location with
ᮡ
ᮢ
/
or Pg+/Pg- keys.
● Press the green(TEXT) key. Font Table will be displayed.
● Select desired font table using the Num.1~5 keys.
ᮤ
ᮣ
ᮡ
ᮢ
● Select desired character with
/
,
/
and
then press the OK key to paste character to the string.
Note : Pg- key : Backspace.
● Press the MENU key and then press the OK key
to save the set data.
D
I
G
I
T
A
L
T
E
R
R
E
S
GB-22
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING THE RECEIVER
3. Parental Lock
This “Parental Lock” feature sets viewing restrictions and
prevents unauthorized access to your DTB-9401F through
the PIN (Personal Identification Number), which is a 4 digit
number. (The factory preset PIN Code : 0000)
On selecting this menu, you will have two options:
to set lock for any desired channel and to change
your PIN value.
● Enter PIN Code.
If you have not entered your own PIN Code then the PIN Code 0000 applies,
which was set at the factory.
3.1 Set Channel Lock
● Select the TV or RADIO channel window by
ᮤ
ᮣ
pressing the
/
or TV/RADIO key.
ᮤ
ᮣ
● Select the channel by pressing the
/
or
Pg+/Pg- keys.
● Select the channel lock by pressing red( i ) key.
● Press the OK key for confirmation.
This will lock the channel. Whenever you need to view
the channel, you will have to enter the PIN at the request
window.
After entering PIN Code to able to access a parental locked
channel, it will work on all parental locked channels.
It means that you can access all parental locked
channels with entering PIN Code on any parental locked
channel successfully.
To cancel the lock :
● Press the red( i ) key again in order to cancel the lock.
T
R
I
A
L
R
E
C
E
I
V
E
R
GB-23
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING THE RECEIVER
3.2 Change PIN Code
To change the PIN Code, select the second option
“Change PIN Code”.
This will take you to the following menu:
In this option, you need to enter the current PIN Code at the first
cursor, and at the second cursor enter the desired PIN Code.
To confirm, you need to enter the new PIN Code again.
Please remember the PIN Code should be a 4 digit numerical
value.
THE FACTORY PRESET PIN CODE : 0 0 0 0.
Note : If you forget the PIN Code, contact your dealer or service provider.
Once you change password, please do not forget and keep well.
D
I
G
I
T
A
L
T
E
R
R
E
S
GB-24
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING THE RECEIVER
4. System Setup
This option enables you to change the factory preset system
settings as per your requirements.
4.1 Language Selection
The “Language Selection” option allows the user to select
the desired language of the OSD, Soundtrack, Teletext,
Subtitle or EPG.
● To accommodate user from different regions speaking
different languages, OSD languages are available 18
languages.
ᮤ
ᮣ
● To select the desired language menu, press the
/
keys
to change language and press the OK.
● The OSD Language, Soundtrack, Teletext, Subtitle, or EPG
will vary according to the selected language.
4.2 OSD Setting
You can set the OSD transparency and the display time.
● Select OSD Transparency level.
The OSD Transparency level from 0 to 100%.
ᮤ
ᮣ
Setting is made with the numeric keys,
/
keys
or Pg+/Pg- keys.
ᮤ
ᮣ
/
keys
: Setting in increment of 1%.
Pg+/Pg- keys : Setting in increment of 10%.
● Set the display duration of the information(banner)
box displayed in the screen.
The time ranges from 0.5 to 60.0 seconds.
ᮤ
ᮣ
Setting is made with the numeric keys,
/
keys or Pg+/Pg- keys.
ᮤ
ᮣ
/
keys
: Adjusting in increment of 0.5sec.
Pg+/Pg- keys : Adjusting in increment of 1 sec.
● Set the DVB subtitle : ON/OFF
T
R
I
A
L
R
E
C
E
I
V
E
R
GB-25
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING THE RECEIVER
4.3 Media Settings
You can set the various media settings you want.
Place the cursor on this sub menu and press the OK key.
ᮡ
ᮤ
ᮢ
ᮣ
● Press the
/
/
keys to move the sub items and
keys to select the option.
press the
● Press the OK key to confirm.
● Press the MENU/EXIT keys to exit the menu.
● Select the TV system : PAL or SECAM.
● Select the TV type according to your TV:
STANDARD 4: 3 ratio or WIDE SCREEN 16 : 9 ratio type.
● Select the aspect ratio conversion :
Letter box, Pan & Scan, Mixed or Full.
● Select the Video Signal Type :
Composite+RGB or Composite.
4.4 Time & Timer Setting
Various time modes can be set, such as current local time,
switch on/off time. The exact local present time can be
adjusted by using the GMT.
● Place the cursor on this sub menu and press the OK key.
ᮤ
ᮣ
● Press the Pg+/Pg-,
/
keys to change the Local time in
Time Zone. The local time will be changed according to your
location.
GMT is referred to the standard time of Greenwich.
This cannot be changed.
ᮤ
ᮣ
● Press the
/
keys to choose event repetition you
want to reserve : Daily, Every Sunday, Every Monday,
Every Tuesday, Every Wednesday, Every Thursday, Every Friday,
Every Saturday, Once.
● Press the Numerical (0~9) keys to set the time you want and press
ᮤ
ᮣ
the
/
keys to choose a switch time you want to reserve.
ᮤ
ᮣ
● Select TV program to set the event program by pressing
/
keys.
When you press the TV/RADIO key, TV program and Radio program are toggled.
D
I
G
I
T
A
L
T
E
R
R
E
S
GB-26
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING THE RECEIVER
4.5 System Information
If you have to contact your service provider or a service center
they might ask for information available from this menu.
Place the cursor on this sub menu and press the OK key.
The following will be the on-screen display.
4.6 Software Upgrade
You can download and upgrade the system software of the receiver through a specific
channel through a specific channel designated by the broadcaster.
The distributor will provide you with more information about that.
If you select to download a new software version, all your previous settings, access code
and favourite channels etc. will be erased! Downloading may take a while during downloading
don’t turn off the receiver.
T
R
I
A
L
R
E
C
E
I
V
E
R
GB-27
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
In some region, the digital terrestrial signal may be weak.
So you’d better use the antenna in which the booster was built,
for watching the weak sinal channels.
You can download and upgrade the system software of the receiver through
a specific channel through a specific channel designated by the broadcaster.
The Distributor will provide you with more information about that.
Problem
Possible cause
Solution of the problem
No display LED on
the front panel;
Power cord
not plugged in correctly
Power cord plug in correctly
Back switch in correctly
No power supply
No pictures on the screen
Receiver in Standby mode;
Scart not connected tightly
to video output of television;
incorrect channel or video
output selected on television
Set receiver to “On”;
Check connection and correct;
Check channel and video output and
correct (TV instruction manual)
No sound
Audio cord connected
incorrectly;
Check connection and correct;
Loudness level = 0;
Muting active
Increase loudness on television set;
Press the MUTE key
Remote Control does not
operate directly
incorrect operation;
Point remote control
towards the Receiver.
Batteries dead or inserted
incorrectly
Replace batteries or insert correctly
Poor picture quality
Signal strength too low
Check the signal strength in
the “Auto Scanning” menu, correct
alignment of your antenna
On-Screen Error Message
“Searching for signal”
Antenna cable not connected
or not tight;
Check connection and correct;
incorrect position of the
antenna;
Check position and correct,
Check the signal strength in
the “Auto Scanning” menu
On-Screen Error Message
“Channel data
Rereiver not yet set
Scanning of in “Automatic scanning”
or “Manual scanning” menu
does not exist.”
DISPOSAL
The device, packaging material (e.g. Styrofoam) and the batteries must never
be disposed of with household refuse.
Please obtain appropriate information about the regulations in your community,
and dispose of all refuse in accordance with regulations at the separate
locations provided.
D
I
G
I
T
A
L
T
E
R
R
E
S
GB-28
Download from Www.Somanuals.com. All Manuals Search And Download.
TECHNICAL SPECIFICATIONS
Power supply
Type :
SMPS
Input Voltage :
Fuse rating :
AC 100 - 240V 50/60 Hz
250 V/T1.6 AH
Power Consumption :
Stand by :
Max. 10W
7W
Demodulator
Type :
FFT :
COFDM DEMODULATION (DVB-T)
2K OR 8K
Code Rate :
Guard Intervals :
1/2,2/3,3/4,5/6,7/8
1/4,1/8,1/16 & 1/32
RF Input
Input Connector :
Frequency range :
Input Signaln Level :
Loop Through :
IEC, Female
50 ~ 860 MHz
-78 ~ -20 dBm
50 ~ 860 MHz, IEC, Male
Video decoder
System decoding :
MPEG 2 ISO/IEC 13818
(transport stream)
Profile and level :
Data rate :
MPEG 2 MP@ML (4:2:2)
1~ 15 Mb/s
Video formats :
Picture resolution :
4:3 (normal) & 16:9 (widescreen)
720(H) x 576(V) x 50 fields/sec
Audio Decoder
System decoding :
Audio mode :
MPEG 1 ISO/IEC 11172~3 layer I & II
single channel, dual channel, stereo,
joint stereo
Sampling frequency :
32, 44.1, 48 KHz
Note : The specification of the STB may be changed without notice in advance.
T
R
I
A
L
R
E
C
E
I
V
E
R
GB-29
Download from Www.Somanuals.com. All Manuals Search And Download.
TECHNICAL SPECIFICATIONS
BASE-BAND AUDIO/VIDEO OUTPUT
VIDEO
Video Type :
Interface :
Impedance :
Output level :
PAL, SECAM
2 SCART (TV, VCR)
75Ω
1Vp-p
AUDIO
Inteface :
Impedance :
2 SCART (TV, VCR)
600Ω
Output level :
Frequency response :
DIGITAL AUDIO (S/PDIF) :
3.0Vp-p max (controllable)
ע 3dB (20~15kHz) Connector : Fiber-Optic
MEMORY
Flash :
SDRAM :
2MB
8MB
PHISICAL SPECIFICATION
Size (W x D x H) :
Weight (Net) :
233 x 176 x 38 mm
0.95Kg
D
I
G
I
T
A
L
T
E
R
R
E
S
GB-30
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMO
T
R
I
A
L
R
E
C
E
I
V
E
R
GB-31
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMO
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMO
Download from Www.Somanuals.com. All Manuals Search And Download.
|