00-M30UK(Cover) 5/22/00 4:08 PM Page 1
If you have access to this online service, you can download
the User’s Guide and drivers from Samsung Electronics.
P/N : JB68-00390A Rev. 1.00
Download from Www.Somanuals.com. All Manuals Search And Download.
00-M30UK(i to 1-5) 5/22/00 2:59 PM Page i
Safety Precautions
Before using the printer, please read the instructions in this guide
carefully and keep the guide in a safe place close to the printer, so that it
is available when you need it later. Please take the following precautions
when using your printer.
Important Precautions and
Safety Information
When using this machine, these basic safety precautions should always
be followed to reduce risk of fire, electric shock, and injury to persons:
1. Read and understand all instructions.
2. Use common sense whenever operating electrical appliances.
3. Follow all warnings and instructions marked on the product and in the
literature accompanying the product.
4. If an operating instruction appears to conflict with safety information,
heed the safety information. You may have misunderstood the
operating instruction. If you cannot resolve the conflict, contact your
sales or service representative for assistance.
5. Unplug the machine from the AC wall socket before cleaning. Do not
use liquid or aerosol cleaners. Use only a damp cloth for cleaning.
6. Do not place the machine on an unstable cart, stand, or table. It may
fall, causing serious damage.
7. Your machine should never be placed on, near, or over a radiator,
heater, air conditioner, or ventilation duct.
8. Do not allow anything to rest on the power or printer cable. Do not
locate your machine where the cords might be damaged by persons
walking on them.
9. Do not overload wall outlets and extension cords. This can diminish
performance, and may result in the risk of fire or electric shock.
10. Do not allow pets to chew on the AC power, or PC interface cable.
i
Download from Www.Somanuals.com. All Manuals Search And Download.
00-M30UK(i to 1-5) 5/22/00 2:59 PM Page ii
11. Never push objects of any kind into the machine through case or
cabinet openings. They may touch dangerous voltage points, creating a
risk of fire or shock. Never spill liquid of any kind onto or into the
machine.
1
Chapter
Introduction
12. To reduce the risk of electric shock, do not disassemble the machine.
Take it to a qualified service technician when repair work is required.
Opening or removing covers may expose you to dangerous voltages or
other risks. Incorrect reassembly could cause electric shock when the
unit is subsequently used.
Overview .............................................................. 1-1
About This Guide .................................................. 1-2
Main Features ...................................................... 1-3
Printer Components .............................................. 1-4
13. Unplug the machine from the printer, and AC wall outlet, and refer
servicing to qualified service personnel under the following conditions:
• When any part of the power cord, plug, or connecting cable is
damaged or frayed.
• If liquid has been spilled into the product.
• If the product has been exposed to rain or water.
• If the product does not operate properly after instructions have been
followed.
2
Chapter
Setting up Your Printer
Overview ............................................................... 2-1
Unpacking Your Printer ......................................... 2-2
Connecting the Printer Cable ................................ 2-4
Connecting the Power Cord .................................. 2-7
Loading Paper into the Input Tray ........................ 2-8
Installing the Print Cartridges .............................. 2-10
Testing the Printer ............................................... 2-16
• If the product has been dropped, or the cabinet appears damaged.
• If the product exhibits a sudden and distinct change in performance.
14. Adjust only those controls covered by the operating instructions.
Improper adjustment of other controls may result in damage, and may
require extensive work by a qualified service technician to restore the
product to normal operation.
15. Avoid using this machine during a lightning storm. There may be a
remote risk of electric shock from lightning. If possible, unplug the AC
power and telephone for the duration of the lightning storm.
Installing the Printer Software ............................. 2-17
Uninstalling the Samsung Software .................... 2-25
Making Installation Diskettes .............................. 2-26
17. SAVE THESE INSTRUCTIONS.
ii
iii
Download from Www.Somanuals.com. All Manuals Search And Download.
00-M30UK(i to 1-5) 5/22/00 2:59 PM Page iv
3
6
Chapter
Chapter
Using the Control Panel
Making a Copy
Overview ............................................................... 3-1
Control Panel Buttons ........................................... 3-2
Control Panel Display ........................................... 3-4
Overview ............................................................... 6-1
Making a Single Copy ........................................... 6-2
Making Multiple Copies ......................................... 6-3
Changing Copy Setup ........................................... 6-4
Collated Copying ................................................... 6-6
Making a Clone Copy ........................................... 6-7
Printing Multipage on a Single Page
(SCX-1000S only).................................................. 6-8
Printing Poster ...................................................... 6-9
4
Chapter
Print Media
Overview ............................................................... 4-1
Media Size ............................................................ 4-2
Print Media Characteristics ................................... 4-3
Paper Guideline .................................................... 4-4
Using the Manual Feed Slot ................................. 4-5
7
Chapter
Smart Media Function (SCX-1000S only)
Overview ............................................................... 7-1
About Smart Media Card ...................................... 7-2
Printing Images ..................................................... 7-4
Selecting Print Mode ..............................................7-5
Deleting Images .....................................................7-6
Storing Images ...................................................... 7-7
5
Chapter
Printing Tasks
Overview ............................................................... 5-1
Selecting the Printer ............................................. 5-2
Printing a Document ............................................. 5-3
Using Features in the Printer Driver ..................... 5-7
8
Chapter
Changing Printer Setting
Overview ............................................................... 8-1
Selecting the Paper Size ...................................... 8-2
Selecting the Paper Type .......................................8-3
iv
v
Download from Www.Somanuals.com. All Manuals Search And Download.
00-M30UK(i to 1-5) 5/22/00 2:59 PM Page vi
9
Chapter
Maintaining Your Printer
Appendix
Overview ............................................................... 9-1
Replacing Print Cartridge ...................................... 9-2
Aligning Print Cartridge ......................................... 9-3
Cleaning Your Printer ............................................ 9-4
Cleaning the Print Cartridge Carrier Contacts ...... 9-6
Printing the Help List ............................................. 9-7
Restoring the Menu to the Default Setting .............9-8
Appendix
Specifications ........................................................ A-1
Replacing the Fitted Plug ..................................... A-4
Guarantee ............................................................. A-5
Index ..................................................................... A-6
10
Chapter
Troubleshooting
Overview ............................................................ 10-1
Clearing Paper Jams .......................................... 10-2
Error Messages .................................................. 10-5
General Printing Problems ................................ 10-10
Print Quality Problems ...................................... 10-12
Scanning Problems .......................................... 10-14
OCR Problems .................................................. 10-17
vi
vii
Download from Www.Somanuals.com. All Manuals Search And Download.
00-M30UK(i to 1-5) 5/22/00 2:59 PM Page 1
1
Chapter
Introduction
Overview
Congratulations on the purchase of your SCX-1000
Series printer!
This chapter provides the following information:
About This Guide
Main Features
Printer Components
Introduction
1-1
Download from Www.Somanuals.com. All Manuals Search And Download.
00-M30UK(i to 1-5) 5/22/00 2:59 PM Page 2
About This Guide
Main Features
This Printer provides the following main features:
This guide will show you to get started and perform the most common
tasks with your printer.
You can print with excellent quality and high speed
G
High-quality printing at a maximum resolution of 1200 dpi
G
Printing speeds of 9 ppm (page per minute) for mono prints,
and 4.5 ppm (page per minute) for colour prints
Conventions used
Throughout this guide, following specific conventions are used to help
you quickly identify information:
With SmarThru 2, you can easily copy, or scan documents and
photographs into your computer, and maintain them as
electronic documents. You can also use SmarThru to quickly
transmit scanned documents by fax or electronic mail, or to
print a copy on your printer.
This label identifies significant information.
Scan
This label identifies information you should know before
you continue.
Copy
Scan to FAX
This label calls attention to an operating procedure,
practice, or the like, which, if not correctly performed or
adhered to, could result in damage to or destruction of
part or all of the product or your data.
Scan to E-mail
Scan to OCR
Scan to Smart
Media
(SCX-1000S only)
You can use this printer as your scanner
You can easily scan documents and photographs.
Your printer is a high quality copier
G
G
G
Colour Copies
Adjustable Contrast/Resolution
Reduce/Enlarge
G
G
Multiple Copies Collate
You can print images captured on digital cameras (SCX-1000S only)
Since everything is saved on a Smart Media Card, you can
print out graphics files and make copies without a direct link
to a PC.
Introduction
Introduction
1-2
1-3
Download from Www.Somanuals.com. All Manuals Search And Download.
00-M30UK(i to 1-5) 5/22/00 2:59 PM Page 4
Printer Components
Front View
Rear View
The following illustration shows the front view of your printer and
indicates the various main elements.
The following illustration shows the rear view of your printer and
indicates the various main elements.
Scanner Bed
Top Cover
Scanner bed
Cartridge
Compartment
Cover
Parallel Interface
Connector
Power Connector
Rear Cover
Control Panel
USB Port
Ink Cartridge and
Smart Media
Carrier (inside)
Function Buttons
Display
Manual
Feeder
(SCX-1000S only)
Smart Media Slot
(SCX-1000S only)
Handle
Paper Input
Tray
Paper Out Tray
Introduction
Introduction
1-4
1-5
Download from Www.Somanuals.com. All Manuals Search And Download.
01-M30UK(1-6 to 2-11) 5/22/00 3:18 PM Page 1
2
Chapter
Memo
Setting Up Your Printer
Overview
This chapter provides step-by-step information
on setting up your printer.
Unpacking Your Printer
Connecting the Printer Cable
Connecting the Power Cord
Loading Paper into the Input Tray
Installing the Print Cartridge
Testing the Printer
Installing the Printer Software
Setting Up Your Printer
2-1
Introduction
1-6
Download from Www.Somanuals.com. All Manuals Search And Download.
01-M30UK(1-6 to 2-11) 5/22/00 3:19 PM Page 2
Unpacking Your Printer
When you start unpacking the box of your printer, you will find the
During the storage and transport of your printer, adhesive tape is used
to protect some of the elements that may move or open unexpectedly
and consequently be damaged.
following items in addition to your printer.
Remove all the adhesive tapes, as illustrated below.
1
Power Cord
Parallel Cable
Print Cartridges
(Colour/Black)
●●
User’s Guide
SmarThru 2 Guide
CD-ROMs
●●
If you find that any of the above items are missing or
damaged, contact your local dealer.
Slide the Input Tray out of the printer.
Remove the packaging material from the tray.
2
●
The shape of power cord may differ, depending on your
country.
●
If necessary, purchase the USB cable. If you are an
SCX-1000S user, you will need to purchase Smart Media
Card for full advantage of your machine.
Setting Up Your Printer
Setting Up Your Printer
2-2
2-3
Download from Www.Somanuals.com. All Manuals Search And Download.
01-M30UK(1-6 to 2-11) 5/22/00 3:19 PM Page 4
Connecting the Printer Cable
The SCX-1000 Series printer has two interfaces for wide connectivity;
parallel and USB. If you are running Windows 98 or higher and your
computer is equipped with a USB port, see page 2-6 for connection.
Push the metal clips down to fit inside the notches on the
cable plug.
3
4
Parallel cable connection
To prevent malfunction, it is strongly recommend that you use
the supplied parallel cable with the printer. If you need to
purchase another cable, ensure that it is complies to IEEE-
1284.
Check that both the printer and the computer are powered
off and disconnected from the power point.
1
Plug the other end of the cable into the appropriate parallel
connector on your computer and fasten it tight.
Plug one end of the parallel cable into the connector on the
rear of the printer.
2
Setting Up Your Printer
Setting Up Your Printer
2-4
2-5
Download from Www.Somanuals.com. All Manuals Search And Download.
01-M30UK(1-6 to 2-11) 5/22/00 3:19 PM Page 6
Continued
Connecting the Printer Cable
Connecting the Power Cord
To use a USB cable for printing, your computer should be running
Windows 98 or higher and have a USB port.
The SCX-1000 Series printer has a power range of 110-240V AC.
USB cable connection
Plug one end of the power cable supplied to the connector
on the rear of the printer.
1
The USB and parallel printer cables cannot be connected
simultaneously. You should decide which connection to use and the
best connection to fit your requirement.
Plug the other end into a suitable power point.
2 The printer indicates and enters the Ready Mode. At this
moment, you will hear some of movement inside the printer.
Make sure that both the printer and computer are turned off.
1
Plug one end of the certified USB cable into the USB port on the
printer.
2
Plug the other end into the USB port on the computer.
3
Setting Up Your Printer
Setting Up Your Printer
2-6
2-7
Download from Www.Somanuals.com. All Manuals Search And Download.
01-M30UK(1-6 to 2-11) 5/22/00 3:19 PM Page 8
Loading Paper into the Input Tray
Your printer has the Input Tray that can hold up to 150 sheets of paper.
Squeeze the Width Guide and slide it to fit the edge of the
paper.
4
5
Pull the tray completely out of the printer.
1
Slide the Length Guide in to fit the bottom edge of the
paper.
Slide the paper width and length guides to their
outermost positions.
2
Place the paper against the right side of the tray with
the recommended print side face down.
Push the input tray back towards the printer until it stops.
Do not fold or
crease the paper.
3
6
If necessary, flex the
sheets back and
forth to loosen them,
then fan them.
Setting Up Your Printer
Setting Up Your Printer
2-8
2-9
Download from Www.Somanuals.com. All Manuals Search And Download.
01-M30UK(1-6 to 2-11) 5/22/00 3:19 PM Page 10
Installing the Print Cartridges
Complete the following steps to move the Print Cartridge
Carrier into the installation position.
When you unpack the printer, the Print Cartridge Carrier is hidden on the
right side of the printer. The carrier slides horizontally across a track inside
the printer.
3
4
a) Press Setup until CARTRIDGE appears in the display.
It must move into the installation position on the far left side of the printer
to install the print cartridges.
b) Press ˆ or ¤ until CHANGE CAR. appears in the second row of
the display.
Do not pull the Print Cartridge Carrier by hand. Doing so
may damage the printer.
c) Press Enter/Select.
The Print Cartridge Carrier moves to the far left side of the printer.
You are now ready to install the print cartridges.
Remove the sticker and the transparent tape covering the
copper contact area on one of the cartridges.
To print correctly, the cartridges should be installed into
the correct slot.
1
2
Put the cartridges in the carrier slot as indicated below:
Cartridge Type
Black/Photo*
Colour
Cartridge Carrier Slot
Do not touch the
copper contact area.
Right
Left
* Photo cartridge is optional.
Copper Contact Area
Insert cartridges.
Lift the Scanner Bed (●), and support it with the Cartridge
Compartment Cover (●).
Black or Photo
Cartridge
Colour
Cartridge
Setting Up Your Printer
Setting Up Your Printer
2-11
2-10
Download from Www.Somanuals.com. All Manuals Search And Download.
02-M30UK(2-12 to 2-21) 5/22/00 3:41 PM Page 14
Continued
Installing the Print Cartridge
To change the alignment value
1) From the ALIGNMENT A group on the test page, locate the
number under the alignment pattern that comes closest to forming
a perfectly straight line.
The following illustrations are examples of the alignment test
patterns. Each pattern has a letter above it (A, B, C, D, E,
and F for black/color, A, B, C and D for color/photo
cartridge).
11
2) Press ˆ or ¤ to display the correct alignment value based on the
printed test page.
3) Press Enter/Select to choose the correct alignment value.
The next Alignment screen appears on the display.
4) Repeat steps 1 through 3 to select alignment values for B, C, D,
E, and F.
Once you pressed Enter/Select to choose the correct value for
ALIGNMENT F, the printer returns to the Ready Mode.
■
■
When either print cartridge starts to run out of ink, replace the empty print cartridge.
If you do not have a new replacement for the empty print cartridge, leave the empty
print cartridge in the printer.
Keep a spare print cartridge on hand. When buying print cartridges, check the part
numbers referenced below carefully to ensure that you are buying the correct print
cartridge.
ALIGN CARTRIDGE
15 [00-30]
Once the cartridge alignment test
page has printed, the display looks
like this:
¤
A
The current alignment
value appears in the
second row.
These print cartridges have been specifically designed to work with your printer to
produce results that are always clear and sharp.
If you want to purchase a new print cartridge, either contact your point of purchase
or any Lexmark authorized supplies dealer.
■
Cartridge type
Part number
Standard
Lexmark P/ N 12A1970
Lexmark P/ N 12A1975
Lexmark P/ N 15M0120
Lexmark P/ N 15M0125
Lexmark P/ N 12A1990
Black cartridge
High yield
Standard
Colour cartridge
High yield
Photo cartridge (optional)
Setting up Your Printer
Setting up Your Printer
2-15
2-14
Download from Www.Somanuals.com. All Manuals Search And Download.
02-M30UK(2-12 to 2-21) 5/22/00 3:41 PM Page 16
Testing the Printer
Installing the Printer Software
The printer software (printer driver) and the SmarThru 2 program
are provided on two CD-ROMs. To use your new machine as a
printer, the printer software must be installed. In addition, it is
recommended to install SmarThru 2 program to take more
features than the stand-alone printer.
Each time you install a new print cartridge, run the Self Test to check if the
print cartridge is installed properly.
Press Setup until MAINTENANCE
appears in the display.
[MAINTENANCE]
HELP LIST
Printer software (printer driver)
1
2
¤
¤
The printer driver accesses the printer features and allows
the computer to communicate with the printer.
Press ˆ or ¤ until PRINT SELF
TEST appears in the second row of
the display.
[MAINTENANCE]
PRINT SELF TEST
SmarThru 2 program
The program called SmarThru 2 is an application program that helps
you manage your printer.
Samsung SmarThru 2 provides you with :
■
A Mail Box that can send, receive and store e-mail and fax
Press Enter/Select.
PRINTING
■■■
messages.
3 The message PRINTING appears in
■
An Image Manager that supports operations on images.
the display.
■
Scan Manager that supports scanner operations.
■
A Copy Manager that controls the copying process.
■
AnyPage Lite OCR software gives you the possibility to convert
scanned images into text documents suitable for editing in your
favorite text editor.
■
Smart Media Manager that can store, delete and edit scanned
For information about SmarThru 2, see the separate
SmarThru 2 Guide.
Setting up Your Printer
Setting up Your Printer
2-17
2-16
Download from Www.Somanuals.com. All Manuals Search And Download.
02-M30UK(2-12 to 2-21) 5/22/00 3:41 PM Page 18
Continued
Installing the Printer Software
Installing the printer software
1
Hardware Requirements
To install and run the Printer Software you must have the following
hardware configuration:
Make sure the printer is plugged in and connected to your
computer.
1
■
120MB of available Hard disk space
■
Pentium 133 or better
Start Windows.
■
32MB of RAM or more
2
3
4
When the New Hardware Found message appears, click
the Cancel button.
Software Requirements
To install and run the Printer Software you must have the following
software configuration.
Insert the Setup CD-ROM into the CD-ROM drive.
■
Windows 95 OSR2
The Model Selection window should appear
automatically.
■
Windows 98 or Windows 98 SE
If the installation does not start automatically, do
the following:
■
If you are installing the software onto a Windows NT 4 Workstation,
you must have installed Service Pack 3 or higher
a) Click Start ■ Run from the Windows task bar.
b) Type e:\Setup.exe (substitute your CD-ROM drive
letter for the ‘e’) on the command line, then click the
OK button.
■
Internet Explorer 4.01 or later
Select the printer model which is connected to
your computer.
5
6
Select the language you want to use .
If you do not have a CD-ROM drive, you
can copy the Setup program onto floppy
diskettes.
For more information see ‘Making
Installation Diskettes’ page 2-26.
Setting up Your Printer
Setting up Your Printer
2-19
2-18
Download from Www.Somanuals.com. All Manuals Search And Download.
02-M30UK(2-12 to 2-21) 5/22/00 3:41 PM Page 20
Continued
Installing the Printer Software
Choose the Setup type and click the Next button.
11
Click Install the Samsung Software on your PC.
■
Typical (recommended)
7 The Welcome window appears.
This option allows you to install the
MFP driver, SmarThru software and
OCR software.
■
■
Compact (minimum)
This option only allows you to install
the MFP driver.
Select this icon to
Adobe Acrobat Reader.
Custom (for experienced users)
This option allows you to choose
which components will be installed.
The installation program will prompt
you to select the software items.
Select this icon to make
diskettes of your software.
Select this icon to to
uninstall the Samsung
Software on your computer.
Select the program folder that you want to create
the program icons for, and click the Next button.
12
13
If there is no Internet Explorer 4.0 or above version on your PC,
the Setup program will install Internet Explorer version 5.0 on your PC
first. After installing it, to continue SCX-1000 Series software setup, run
‘Autorun.exe’ from the CD or reinsert the CD in the drive.
■
The files are automatically installed.
■
The progress window appears on
your screen as the program files are
copied onto your computer.
Click Next.
8
Type the user name and company and click the
Next button.
9
After the installation is completed, click on Finish.
The Windows will restart.
Select the folder which the Samsung Software will
be installed in, and click the Next button.
10
Setting up Your Printer
Setting up Your Printer
2-21
2-20
Download from Www.Somanuals.com. All Manuals Search And Download.
03-M30UK(2-22 to 3-3) 5/22/00 3:39 PM Page 22
Continued
Installing the Printer Software
After Windows is restarted, now you will be asked to add Fax
Modem.
Setting up your Internet Connection
Set up your Internet connection if you have an E-mail
account from your company or a service provider.
3
Adding a New Fax Modem
2
Select the way you are connected to the Internet
and then click the Next button.
1
2
Click the Next button when SmarThru Add New
Fax Modem window appears.
1
2
If ‘Connection to internet over LAN’ is selected in
step1, the following screen appears. Type your user
name and the e-mail address, and then click the Next
button.
Select the modem that is installed in your system and then
click the Next button.
●
If ‘Use Dial-up for internet
connection’ is selected in
step 1, follow the
instructions on the screen.
Type the identifier (usually your name), select the
Type the mail server address and then click the
fax modem class, and then click the Next button.
Next button.
3
3
●
●
For more information about
Contact your Internet
the Fax modem class, see
the user guide supplied with
your fax modem.
Service Provider for more
details.
When you have completed, click Finish.
4
Setting Up Your Printer
Setting Up Your Printer
2-22
2-23
Download from Www.Somanuals.com. All Manuals Search And Download.
03-M30UK(2-22 to 3-3) 5/22/00 3:39 PM Page 24
Continued
Installing the Printer Software
Uninstalling the Samsung
Software
Type the password that you use to access your
Internet mail server and then click the Next button.
The Uninstall utility is supplied with the Samsung Software to
enable you to remove the software and all associated files
from your hard disk.
4
5
6
To uninstall the printer driver, proceed as follows:
Close any programs that are running first.
1) Click Start ● Programs ● Samsung SCX-1000
Series ● SCX-1000 Series Uninstall from the
Windows task bar.
2) Follow the instructions on the screen.
The printer driver is removed from your hard disk.
Click the Next button.
To uninstall the SmarThru 2 program, proceed as follows:
Close any programs that are running first.
1) Click Start ● Programs ● Samsung SmarThru ●
SmarThru 2 Uninstall from the Windows task bar.
2) Follow the instructions on the screen.
The SmarThru 2 program is removed from your hard disk.
If prompted to do so,
restart your computer.
If necessary, re-install the
Samsung Software.
To complete the configuration of your Internet
e-mail service, click Finish.
Congratulations!
You have finished setting
up your printer.
Now you are ready to
start using it.
Setting Up Your Printer
Setting Up Your Printer
2-24
2-25
Download from Www.Somanuals.com. All Manuals Search And Download.
03-M30UK(2-22 to 3-3) 5/22/00 3:39 PM Page 26
Making Installation Diskettes
If you do not have a CD-ROM drive, you can copy the Setup files from
the Setup CD-ROM onto floppy diskettes at another computer, and then
use them instead of the CD-ROM to install the software.
The Copy to Floppy dialog box appears.
Select the floppy disk drive that you will insert the diskette in.
Insert the Setup CD-ROM into the CD-ROM drive.
5
1
2
Select the printer model which is connected to your computer.
Select the floppy
drive you will use.
Select the language
you want to use.
Select the language you want to use.
3
Click the Make icon.
4
Shows the number of
disks required to copy
Click Copy all disk images.
6
7
8
9
When prompted, insert a blank and formatted diskette into the
floppy drive, and click Yes to start copying.
If you need more than one disk, insert the next disk and click Yes.
When completed copying, click Close in the Copy to Floppy dialog
box.
Setting Up Your Printer
Setting Up Your Printer
2-27
2-26
Download from Www.Somanuals.com. All Manuals Search And Download.
03-M30UK(2-22 to 3-3) 5/22/00 3:39 PM Page 28
Continued
Making Installation Diskettes
3
Chapter
Installing Software from Diskette
Using the Control Panel
Insert the first diskette.
1
2
3
4
Overview
Select Start ● Run from the Windows task bar.
This chapter contains information about using the
printer control panel, changing printer settings,
and understanding control panel menus.
Type A:\setup.exe (substitute your floppy disk drive letter for ‘A’)
on the command line, and then click the OK button.
This chapter provides the following information:
Control Panel Buttons
Follow the instructions on the screen to complete the installation.
Control Panel Display
Setting Up Your Printer
Using Control Panel
3-1
2-28
Download from Www.Somanuals.com. All Manuals Search And Download.
03-M30UK(2-22 to 3-3) 5/22/00 3:39 PM Page 30
Button
Function
Control Panel Buttons
Press Resolution to change the resolution setting
when copying documents.
The Control Panel has many buttons which are used to change
printer settings, make copies, scan documents and maintain the
printer. Look for the following buttons and their functions.
●
NORMAL
BEST
DRAFT
●
●
Press Contrast to change the contrast setting when
copying documents.
●
NORMAL
●
LIGHTEN
●
DARKEN
Press Zoom Rate to reduce or enlarge the size of a
copied image from 25% to 400%.
Press Copy Page to determine the number of copies
(1 to 99) printed for each page.
Press Special Copy to :
Button
Function
●
sort the copy job. (MONO COLLATE)
●
Press Setup to change printer settings.
print several page images on a single page.
Setup
(N-UP, SCX-1000S only)
clone the same images on a single page. (CLONE)
print a single image on 4, 9, or 16 sheets.
(POSTER COPY)
The setup menu includes the following items:
●
●
CARTRIDGE
●
●
PAPER SIZE
●
PAPER TYPE
●
Press Black to make black-and-white copies.
●
MAINTENANCE
●
Press Color to make colour copies.
●
Press ¤ to move to the next item in the menus, or
press ˆ to move to the previous item in the menus.
●
For menu items that have numerical values, such
as for COPY PAGE, press ¤ to scroll forward,
or ˆ to scroll backward.
Smart Media Function Buttons (SCX-1000S only)
●
Button
Function
Press and hold each button for fast scrolling up and
down.
Press Menu to :
Menu
Press Enter/Select to select the menu item shown in
the second row of the display.
●
select the Print Mode
●
delete the images or format on the Smart Media Card
Press Scan to scan and save the images onto the
Smart Media Card.
Press Stop/Restore to return to the Ready Mode.
Press Print to print the stored images on the Smart
Media Card in specific size or in thumbnails.
Using Control Panel
Using Control Panel
3-3
3-2
Download from Www.Somanuals.com. All Manuals Search And Download.
04-M30UK(3-4 to 4-5) 5/22/00 3:26 PM Page 31
Control Panel Display
There are two kinds of messages and they show the information that
you have to take care and what you need to do.
4
Chapter
G
Status messages provide information about the current state
of the printer.
G
Attendance messages indicate printer errors that you must
resolve.
Print Media
Status Message
Status Message indicates the current state of the printer.
For example, if you first plug in the power cord, the printer enters
the Ready Mode and shows following information.
Overview
This chapter provides specifications and guidelines for
each type of print media that can be used with your
printer.
Resolution
Paper Size
NORMAL A4
100%
02 PAGES
Media Size
Zoom Rate
Number of Copies
Print Media Characteristics
Paper Guideline
Attendance Message
Using the Manual Feed Slot
Attendance Message helps you to solve printer problems.
For example, if a paper is jammed in the printer, the message
REMOVE PAPER JAM appears in the display:
REMOVE PAPER JAM
THEN PRESS STOP
Using Control Panel
Print Media
3-4
4-1
Download from Www.Somanuals.com. All Manuals Search And Download.
04-M30UK(3-4 to 4-5) 5/22/00 3:26 PM Page 33
M
edia Size
Print Media Characteristics
The following table lists the types and dimensions of print media that
you can use with your printer.
Print media characteristics affect print quality and reliability.
When you choose print media, consider the following:
Dimension
Media
Weight
The printer automatically feeds paper weights from 20 lbs
Letter
216 mm x 279 mm
(8.50 inch x 11.00 inch)
(8.50 inch x 14.00 inch)
(8.27 inch x 11.69 inch)
(5.83 inch x 8.27 inch)
(7.17 inch x 10.12 inch)
(7.25 inch x 10.50 inch)
(4.13 inch x 5.85 inch)
(3.94 inch x 5.83 inch)
(3.88 inch x 7.50 inch)
(3.88 inch x 8.88 inch)
(4.13 inch x 9.50 inch)
(6.93 inch x 9.84 inch)
(4.00 inch x 6.00 inch)
to 24 Ibs.
Legal
216 mm x 356 mm
210 mm x 297 mm
148 mm x 210 mm
182 mm x 257 mm
184 mm x 267 mm
105 mm x 149 mm
100 mm x 148 mm
98 mm x 190 mm
98 mm x 225 mm
105 mm x 241 mm
176 mm x 250 mm
102 mm x 152 mm
A4
Surface Smoothness
The degree of smoothness of the paper affects print quality.
If the paper is too rough, the ink may not adhere to the
paper properly, resulting in poor print quality.
A5
B5
Executive
A6 Card
Moisture Content
The amount of moisture in the paper affects both print
quality and paper feeding reliability.
Postcard Hagaki
Envelope #7 3/4
Envelope #9
Envelope #10
Envelope B5
Post Card 4x6
Custom
Always test a sample of paper before purchasing
large quantities.
76.2~215.9 mm x 127.0~355.6 mm
(3.00~8.50 inch x 5.00~14.00 inch)
Using media that does not conform to the
specifications listed in the paper specifications
can cause problems that require service.
Print Media
Print Media
4-2
4-3
Download from Www.Somanuals.com. All Manuals Search And Download.
04-M30UK(3-4 to 4-5) 5/22/00 3:26 PM Page 35
Paper Guideline
Using the Manual Feed Slot
When choosing any paper type, consider the weight, surface
smoothness and colour of the paper.
Your Printer has a Manual Feeder that lets you feed the papers
which cannot be fed through the Input Tray. The OHP, thick paper,
envelopes, and unformatted paper should be fed manually through
the Manual Feeder. This feeder allows only one sheet at one time.
G
For best print quality, use inkjet paper.
G
Use only undamaged paper
Not supported paper types
- Multiple-sheet forms or documents
- Preprinted papers with chemicals that may contaminate
the printer.
- Rough-edged or curled papers
- Synthetic paper
Manual Feeder Slot
- Thermal paper
Insert the media fully until the printer picks it up.
1
Guidelines for paper storage
G
Keep paper away from moisture, direct sunlight or other
conditions that can cause it to wrinkle or curl.
Insert the media with
the recommended
print side face up.
G
Do not place anything on top of the paper packages.
G
Store cartons of paper on a pallet or shelf, rather
than directly on the floor.
Send your job to print.
2
Print Media
Print Media
4-4
4-5
Download from Www.Somanuals.com. All Manuals Search And Download.
05-M30UK(4-6 to 5-9) 5/22/00 3:37 PM Page 1
5
Chapter
Memo
Printing Tasks
Overview
This chapter shows how to print a file in Windows and
each property you can change.
Selecting the Printer
Printing a Document
Using Features in the Printer Driver
Print Media
Printing Tasks
5-1
4-6
Download from Www.Somanuals.com. All Manuals Search And Download.
05-M30UK(4-6 to 5-9) 5/22/00 3:37 PM Page 2
Printing a Document
Selecting the Printer
The following procedure describes the general steps required
for printing from various Windows applications.
The steps for printing a document may vary depending on the
application program you are using.
After installation, the Samsung Software (printer driver), SCX-1000
Series printer is automatically selected as the default printer.
If you, in any reason, want to set the SCX-1000 Series printer as the
default printer, follow the procedures as described below:
Start your application you are using to create the document,
and open the document you want to print.
Setting Your Default Printer
1
2
Select Start ➝ Settings ➝ Printers from the Windows task
Select Print from the File menu.
bar.
1
➝
You can see the print dialog box for your application.
➝
The basic print settings you will need are usually selected
within this print dialog box.
Double-click the SCX-1000 Series icon.
2
➝
To take full advantage of the
printer features, click the
Properties button.
For more information about
Properties, see ‘Using Features
in the Printer Driver’ on page 5-7.
Click Printer and select Set as Default.
3
Any changes you make in
the application apply while
it is running. If you want to
apply all the changes to
every application, use
Printers of the Control Pale
in Windows Setting.
After you have changed settings, click OK to start printing.
3
Printing Tasks
Printing Tasks
5-3
5-2
Download from Www.Somanuals.com. All Manuals Search And Download.
05-M30UK(4-6 to 5-9) 5/22/00 3:37 PM Page 4
Continued
Printing a Document
About Printer Control Program Window
When the SCX-1000 Series Control Program on LPT1 window appears,
click the appropriate tab for the options.
Starting the SCX-1000 Series Control Program
Using the Options Tab
Select Start ➝ Programs ➝➝Samsung SCX-1000 Series ➝
This tab allows you to specify the Control Program setup options.
Printer Control Program from the Windows task bar.
Check this option to prevent the
Control Program from appearing
on your computer screen each
time you send a job to print.
Using the Status Tab
Check this option to close the
Control Program when a job has
been sent to the printer.
This tab shows the current printer status.
If your system has bi-directional
communication problems, error
message appears each time you
send a job to print. To avoid seeing
this message, check this option, or
correct the problem.
These images show the
amount of ink remaining
in each cartridge.
These items provide
specific details about
the status of your
print job.
Check this option if your printer
pauses frequently during a print
job, and prints pages with
alternating bands of light and dark
print.
Click to suspend your
print job. Click this
button again to resume
the paused print job.
Click to Cancel Print
the current print job.
Click to print a test
page.
Printing Tasks
Printing Tasks
5-4
5-5
Download from Www.Somanuals.com. All Manuals Search And Download.
05-M30UK(4-6 to 5-9) 5/22/00 3:37 PM Page 6
Continued
Printing a Document
Using Features in the Printer Driver
To take a full advantage of the printer features, be familiar with
each property that the printer provides.
Using the Cartridges Tab
Select Start ➝ Settings ➝ Printers from the Windows task
bar.
1
This tab allows you to choose cartridge options.
Double-click the SCX-1000 Series icon.
2
Shows the amount of
ink remaining in each
cartridge.
Select Printer ➝ Properties.
The Properties dialog box allows you to access all the
information you will need when using your printer.
3
Click to install or
replace the print
cartridge.
Click this button to
order supplies from
Samsung’s World
Wide Web site.
Click to clean the
print nozzles.
Click to align printheads.
For more information
about the print cartridge,
see Chapter 9.
Click the appropriate tab, and then select/deselect the
required options.
4
Printing Tasks
Printing Tasks
5-7
5-6
Download from Www.Somanuals.com. All Manuals Search And Download.
05-M30UK(4-6 to 5-9) 5/22/00 3:37 PM Page 8
Continued
Using Features in the Printer Driver
Document/Quality Tab
Paper Tab
This tab allows you to specify the document type,
paper type and print quality.
This tab allows you to specify paper size, number of copies, page
collation and page orientation.
Document Types
Automatic: Automatically
produces quality printing.
Copies
Orientation
Vivid Color: Produces
Sets the number of
copies you want to print.
enhanced colour printing.
Select the default
orientation
of the printed page.
Natural Color: Produces
photo-realistic natural colour
printing.
Collate: If Collate is
checked, the printer
prints each job again as
many times as specified in
the Copies field.
Black Color: Optimizes
black and white printing.
Paper Source
• Collate is off:
Paper Types
Select the paper type you are
feeding.
The paper source
setting identifies the
default paper tray.
You can restore all the
default settings by clicking
Defaults.
• Collate is on:
Reverse Page Order
Check this option to print
the last at first.
If you want to know
more about each
menu, click the Help
button. The help
screen gives detailed
information about
each menu.
Paper Size
Use this setting to select
the paper size installed in the
Paper Tray or Manual Feeder.
Click to activate a
delay between pages
that allows ink to dry.
Print Quality
You can set the resolution
for the graphics images.
If you want to know
more about each
menu click on the
Help button. The help
screen gives detailed
information about
each menu.
Printing Tasks
Printing Tasks
5-9
5-8
Download from Www.Somanuals.com. All Manuals Search And Download.
06-M30UK(5-10 to 6-9) 5/22/00 3:24 PM Page 1
Continued
Using Features in the Printer Driver
6
Chapter
Advanced Tab
Making a Copy
This tab allows you to specify the halftone type, and adjust the image
brightness, shadow and colour.
Overview
Halftone
This chapter contains information about copying the original,
Use the Halftone settings
to improve the
selecting the special copy, and changing the
copy setup.
appearance of pictures
and graphics.
Image
Making a Single Copy
You can adjust image
Brightness, Contrast,
and colour. Generally,
default settings at 0%
produce the best
image quality.
Line Art: Generally the
best choice for printed text
or pen-and-ink drawings.
Making Multiple Copies
Changing Copy Setup
Fine Dither: Produces
fine quality printing.
Air Brush: Produces
air brush image printing.
Collated Copying
Making a Clone Copy
Printing Multipage on a Single Page (SCX-1000S only)
Printing Poster
If you want to know
more about each
menu click the Help
button. The help
screen gives detailed
information about
each menu.
Printing Tasks
Making a Copy
5-10
6-1
Download from Www.Somanuals.com. All Manuals Search And Download.
06-M30UK(5-10 to 6-9) 5/22/00 3:24 PM Page 2
M
aking a Single Copy
M
aking Multiple Copies
Your printer can copy in black and white or full colour.
You can make copies up to 99 via the Control Panel.
Place your original face down on
the Scanner Bed with the top left
of the original towards the green
Place your original face down on
the Scanner Bed with the top left
of the original towards the green
1
2
1
mark (
), and close the Printer
mark (
), and close the Printer
Top Cover.
Top Cover.
Press the Copy Page button.
[SET COPY PAGE]
01 PAGE
2
3
¤
Start copying by doing one of the
following:
COPYING
PAGE 01
GGG
Press ˆ or ¤ until the desired
number appears on the
display.
[SET COPY PAGE]
04 PAGES
G
Press the Black button to make
¤
black and white copies.
G
Press the Color button to make
If you press and hold
ˆ or ¤ , the number
is increased or
G
For example, if you select 4,
colour copies.
set the pages to 04.
decreased by the step of
five.
If you press Copy Page,
the number is
To cancel a copy in
progress, press the
Stop/Restore button.
Press the Enter/Select button
to select the new setting.
NORMAL A4
100% 04 PAGES
4
G
The selected number appears
increased by ten.
in the display.
Start copying by doing one of
the following:
COPY TO MEMORY
98% PAGE 1
5
G
Press the Black button to
make black and white
copies.
The printer copies the document
into the memory.
To cancel a copy in
progress press the
Stop/Restore button.
PRINTING COPY
COPY 1
PG 1
G
Press the Color button to
make colour copies.
COPYING
PAGE 01
GGG
Making a Copy
Making a Copy
6-2
6-3
Download from Www.Somanuals.com. All Manuals Search And Download.
06-M30UK(5-10 to 6-9) 5/22/00 3:24 PM Page 4
Changing Copy Setup
Before making copies, you can change the contrast, resolution and
scale. Any change will take effective to every copy you will make.
To change Copy Size
To change Copy Contrast
1) Press the Zoom Rate button repeatedly until the desired
setting appears in the display.
1) Press the Contrast button.
2) Press ˆ or ¤ until the desired setting appears in the display.
Or press Zoom Rate, ˆ or ¤ to increase/decrease the scale
value.
You may choose NORMAL, LIGHTEN or DARKEN.
3) Press Enter/Select.
[ZOOM RATE]
¤
NORMAL 100%
Whenever you press Zoom Rate, following options display
in order.
NORMAL 100%
makes a copy that is the same size as
your original.
ENTIRE 91%(ˆ ¤) reduces your copy slightly to ensure
that the whole image, out to all the
edges, is copied.
To change Copy Resolution
AUTOFIT
pre-scans the original to determine where
its edges are, and then reduces or
enlarges the original to fit on the paper
you are using.
1) Press the Resolution button.
2) Press ˆ or ¤ until the desired setting appears in the display.
G
You may choose NORMAL, BEST or DRAFT.
TWICE 200%(ˆ ¤) enlarges the original to 200%.
3) Press Enter/Select.
MAX
400%(ˆ ¤) enlarges the original to the highest
enlargement percentage.
HALF
MIN
50% (ˆ ¤) reduces the original to 50%.
25% (ˆ ¤) reduces the original to the lowest
reduction percentage.
CUSTOM100%(ˆ ¤)lets you specify an exact reduction or
enlargement percentage between 25%
and 400%.
3) Press Enter/Select.
Making a Copy
Making a Copy
6-4
6-5
Download from Www.Somanuals.com. All Manuals Search And Download.
06-M30UK(5-10 to 6-9) 5/22/00 3:24 PM Page 6
Collated Copying
Making a Clone Copy
The SCX-1000 Series printer has a collated copying function to sort
copies.
Use the CLONE setting to print multi-same image on a single page.
For example, 4 IMAGES means four same images are printed on one page.
Place your original face down on the Scanner Bed with the top left
Press the Special Copy button
until MONO COLLATE appears
in the first row of the display.
[MONO COLLATE]
DOCUMENT NO (01)
of the original to the green mark (
Cover.
), and close the Printer Top
1
2
1
The copy will be
produced as
below when
collated.
Press ˆ or ¤ to enter the number of pages to scan.
2
3
Press the Special Copy button
until CLONE appears.
[CLONE]
4 IMAGES
¤
Choose print order by pressing
either Enter/Select or
Stop/Restore.
PRINT REV ORDER?
Y:ENTER N:STOP
Press ˆ or ¤ to select the clone number.
3 You may choose 4 IMAGES, 9 IMAGES, 16 IMAGES or AUTO 100%.
For example, if you have a three-page job to print and
want two copies:
G
When the Enter/Select button is pressed, the printer prints
page 3, page 2, page 1, page 3, page 2, page 1.
Press the Enter/Select button.
CLONE COPY READY
PRESS START COPY
4
5
G
When the Stop/Restore button is pressed, the printer prints
page 1, page 2, page 3, page 1, page 2, page 3.
Start copying by doing one of the
following:
COPYING
PAGE 01
GGG
Press the Black button.
4
5
G
Press the Black button to make
black and white copies.
Press the Color button to make
G
This feature only
allows you to print a
document in black and
white. You cannot
select high quality
printing.
Lift the Printer Top Cover, and then place your first page
face down on the Scanner Bed and close the Printer Top
Cover.
colour copies.
Press the Enter/Select button.
COPY TO MEMORY
94% PAGE 1
6 The printer copies the document
into the memory.
Repeat steps 5 and 6 to copy the remaining pages into the
memory.
7
Making a Copy
Making a Copy
6-6
6-7
Download from Www.Somanuals.com. All Manuals Search And Download.
06-M30UK(5-10 to 6-9) 5/22/00 3:24 PM Page 8
Printing Multipage on a Single
Printing Poster
This feature allows you to print a single page image on 4, 9 or
16 pages, which can be pasted together to form one poster size
image.
Page (SCX-1000S only)
Use the N-UP COPY to print several pages in a single page.
For example, 2-up means two page images are printed on one page.
Press the Special Copy
button until N-UP COPY
appears.
[N-UP COPY]
4 UP
Place your original face down on the Scanner Bed with
the top left of the original to the green mark (
close the Printer Top Cover.
), and
¤
1
1
Press the Special Copy
button until POSTER COPY
appears.
Press ˆ or ¤ to select the number of page images to be
[POSTER COPY]
4 PAGES
2 put in one page.
2
3
¤
Press the Enter/Select button.
4-UP COPY READY
PRESS START COPY
Press ˆ or ¤ to select the number of the pages, which
can be divided.
3
‘4 PAGES’ means a single page image is printed on four
pages, and ‘9 PAGES’ means a single page image is
printed on nine pages.
Start copying by doing one of the following:
4
G
Press the Black button to make black and white copies.
G
Press the Color button to make colour copies.
Press the Enter/Select button
to confirm your selection.
4 PAGES COPY RDY
PRESS START COPY
4
5
Lift the Printer Top Cover,
and then place your first
page face down on the
Scanner Bed and close
the Printer Top Cover.
LOAD DOCUMENT 1
& PRESS ENTER
5
Start copying by doing one of the following:
G
Press the Black button to make black and white copies.
G
Press the Color button to make colour copies.
Press the Enter/Select button.
6
7
The printer copies the document into the memory.
Repeat steps 5 and 6 for the remaining pages.
The printer prints multiple page images on a single page.
Making a Copy
Making a Copy
6-8
6-9
Download from Www.Somanuals.com. All Manuals Search And Download.
07-M30UK(6-10 to 7-7) 5/22/00 3:36 PM Page 1
7
Chapter
Memo
Smart Media Function
(SCX-1000S only)
Overview
This function is only applied to printers with the
Smart Media Function (SCX-1000S only).
This chapter provides the following information:
About Smart Media Card
Printing Images
Selecting Print Mode
Deleting Images
Storing Images
Making a Copy
Smart Media Function
6-10
7-1
Download from Www.Somanuals.com. All Manuals Search And Download.
07-M30UK(6-10 to 7-7) 5/22/00 3:36 PM Page 2
About Smart Media Card
The Smart Media Card is one-third the size of a standard credit
card and extremely slim. Therefore, you can carry it easily in a
wallet, and have convenient access to your data anywhere and at
anytime.
To create a folder on Smart Media Card, you have to use the SmartMedia
Manager in SmarThru 2.
Selecting the file stored on the Smart Media Card
Inserting and Removing Cards
Note that following illustration and example show when you print images captured by a
Samsung digital camera.
Insert a card
Put the card into the slot with its
copper contact area face down
and chamfer side at left until it
snaps.
Root Directory
Level 1 <SAMSUNG>
<USER>
FILE1.JPG
FILE2.JPG
FILE3.JPG
Remove a card
Push the card slightly then it is
partially ejected.
Pull it out of the slot.
Level 2
SDC50001.JPG
SDC50002.JPG
To select and print FILE2.JPG in level 1
[ PRINT MODE ]
ONE IMAGE
¤
1. Press the Print button.
2. Press ˆ or ¤ until ONE IMAGE appears
in the second row of the display.
3. Press the Enter/Select button.
4. Press ˆ or ¤ to find FILE2.JPG.
SELECT IMAGE
<SAMSUNG>
Card care and Storage
SELECT IMAGE
FILE2.JPG
5. Press Enter/Select when FILE2.JPG appears.
Follow the directions for continued high
quality images from the card.
PROCESSING GGG
FILE2.JPG
G
To prevent deleting the images on the
card, adhere the sticker to the indicated
part of the circle.
G
Store the card in the original case if it will not be used
To select and print SDC50002.JPG in level 2
for a long period of time.
[ PRINT MODE ]
ONE IMAGE
G
Do not touch the copper contact area.
The card is easily damaged by static electricity.
¤
1. Press the Print button.
2. Press ˆ or ¤ until ONE IMAGE appears
in the second row of the display.
3. Press the Enter/Select button.
4. Press ˆ or ¤ to find SAMSUNG folder.
5. Press Enter/Select when <SAMSUNG> appears.
6. Press ˆ or ¤ to find SDC50002.JPG.
7. Press Enter/Select when SDC50002.JPG
appears.
SELECT IMAGE
<SAMSUNG>
G
Back up important data onto another medium
(floppy disk, hard disk, etc.)
SELECT IMAGE
SDC50002.JPG
PROCESSING GGG
SDC50002.JPG
Smart Media Function
Smart Media Function
7-2
7-3
Download from Www.Somanuals.com. All Manuals Search And Download.
07-M30UK(6-10 to 7-7) 5/22/00 3:36 PM Page 4
Printing Images
Selecting Print Mode
You can print images captured on digital cameras.
Since everything is saved on a Smart Media Card, you can print
images and make copies without a direct link to a PC.
Using the Smart Media Card slot, the printer can print images
from digital cameras in various sizes.
Insert the Smart Media Card
into the Smart Media slot of
the printer.
1
Smart Media
Function Button
Smart Media Slot
[ PRINT MODE ]
Press the Print button.
2
¤
¤
FILE LIST
Press the Menu button.
1
2
[ PRINT MODE ]
ONE IMAGE
Press ˆ or ¤ to select the
print mode.
3
If PRINT MODE appears in
the first row of the display,
press the Enter/Select
button.
[ PRINT MODE ]
PRINTING SIZE
FILE LIST
The printer prints a list of all files stored in
the directory of the Smart Media Card.
¤
THUMBNAIL The printer reduces and prints all of the
Press ˆ or ¤ until the desired
printing size appears on the
second line of the display.
[PRINTING SIZE]
PHOTO SIZE
images stored on the Smart Media Card.
3
¤
ONE IMAGE
The printer prints only one image.
ALL IMAGES The printer prints all of the images stored
PHOTOSIZE The printer prints images as photo size.
in a directory of the Smart Media Card.
PAPER SIZE The printer prints images as selected paper size.
4 CLONE
9 CLONE
16 CLONE
The printer prints four same images on one page.
The printer prints nine same images on one page.
The printer prints 16 same images on one page.
Press the Enter/Select button.
SELECT IMAGE
<SAMSUNG>
4
The name surrounded by < >
indicates that it is a directory.
This printer can only print
standard JPEG files (24 bit True
Colour). You can easily print
images from the File List or
Thumbnails. (If the image file is
not a JPEG file or a JPEG
standard file is damaged,
Press ˆ or ¤ to select the
Press the Enter/Select button to select the new
setting for the printing size.
SELECT IMAGE
SDC50001.JPG
5 image file you want to print.
4
5
Press ˆ or ¤ to select the
number of pages printed for
each image.
PRINT MULTIPAGE
[01]
Press the Enter/Select button.
PROCESSING GGG
SDC50001.JPG
appears instead of image.)
¤
6 The printer starts printing.
PRINTING 1 GGG
SDC50001.JPG
Press the Enter/Select button to select the new setting.
6
To change the printing size, see ‘Selecting Print Mode’ on page 7-5.
Start printing.
To Select the number of copies printed for each image,
7 See 'Printing Images' on page 7-4.
see ‘Selecting Print Mode’ on page 7-5.
Smart Media Function
Smart Media Function
7-4
7-5
Download from Www.Somanuals.com. All Manuals Search And Download.
07-M30UK(6-10 to 7-7) 5/22/00 3:36 PM Page 6
Storing Images
Deleting Images
You can store the scanned images on the Smart Media Card.
You can easily delete images stored on the Smart Media Card.
Smart Media
Smart Media
Function Button
Function Button
Smart Media Slot
Smart Media Slot
To delete a image file from the Smart Media card
Place your original face down on the Scanner Bed with the
top left of the original to the green mark (
Printer Top Cover.
), and close the
Insert the Smart Media Card into the Smart Media slot
of the printer.
1
2
1
2
Press the Menu button until
CARD CONTROL appears in
the first row of the display.
SCANNING GGG
[CARD CONTROL]
DELETE ONE IMG
Press the Scan button to start
¤
¤
scanning.
PROCESSING GGG
SDC50001.JPG
Scanned image is automatically stored
onto the Smart Media Card.
Press ˆ or ¤ until the desired
deleting mode appears in the
second line of the display.
[CARD CONTROL]
DELETE ALL IMG
3
DELETE ONE IMG means one selected image is deleted.
DELETE ALL IMG means all images are deleted.
DELETE DIR
FORMAT
means the selected directory is deleted.
means the card is to be formatted.
Press the Enter/Select button
to select the new setting.
4
5
Press ˆ or ¤ to select the
file you want to delete.
DELETE
SDS00001.JPG
For more information about image file selection, see ‘Selecting the file
Stored on Smart Media Card’ on page 7-3.
Press the Enter/Select button.
DELETING...
6 The selected file is deleted.
Smart Media Function
Smart Media Function
7-6
7-7
Download from Www.Somanuals.com. All Manuals Search And Download.
08-M30UK(7-8 to 9-1) 5/22/00 3:29 PM Page 1
8
Chapter
Memo
Changing Printer Setting
Overview
This chapter provides the following information:
Selecting the Paper Size
Selecting the Paper Type
Smart Media Function
Changing Printer Setting
7-8
8-1
Download from Www.Somanuals.com. All Manuals Search And Download.
08-M30UK(7-8 to 9-1) 5/22/00 3:29 PM Page 2
Selecting the Paper Type
Selecting the Paper Size
The Paper Type Setting lets you specify the type of print media
installed in the Paper Input Tray.
It is important to select the correct paper size from the setup
when using the input tray.
See tables beginning on page 4-2 for a list of the dimensions for
each paper and envelope size.
Press the Setup button
repeatedly until PAPER SIZE
appears.
[PAPER SIZE]
A4
Press the Setup button until
PAPER TYPE appears.
[PAPER TYPE]
PLAIN
1
¤
1
¤
Press ˆ or ¤ until the desired paper size appears in the
second row of the display.
Press ˆ or ¤ until the desired paper type appears in the
second row of the display.
2
3
2
3
NORMAL LETTER
100% 01 PAGES
Press the Enter/Select button.
Press the Enter/Select button.
The selected paper size
appears in the display.
For more information about paper size, see ‘Print Media’
in Chapter 4.
Changing Printer Setting
Changing Printer Setting
8-2
8-3
Download from Www.Somanuals.com. All Manuals Search And Download.
08-M30UK(7-8 to 9-1) 5/22/00 3:29 PM Page 4
9
Chapter
Memo
Maintaining Your Printer
Overview
You will need to replace and clean print cartridges
in your printer in order to maintain optimum print
capabilities.
This chapter provides information about
maintaining your printer.
Replacing Print Cartridge
Aligning Print Cartridge
Cleaning Your Printer
Cleaning the Print Cartridge Carrier Contacts
Printing the Help List
Restoring the Menu to the Default Setting
Changing Printer Setting
Maintaining Your Printer
8-4
9-1
Download from Www.Somanuals.com. All Manuals Search And Download.
09-M30UK(9-2 to 10-3) 5/22/00 3:30 PM Page 2
Replacing Print Cartridge
Aligning Print Cartridge
The following sections take you through the process of
replacing the print cartridges.
For optimal printing you should align the print cartridge. If you
replace print cartridges, your printer automatically prints an
alignment test page. If you need to print an alignment test
page, complete the following steps:
To remove the print cartridge
1) Lift the Printer Top Cover and support it with the Cartridge
[CARTRIDGE]
CHANGE CAR.
Press the Setup button until
CARTRIDGE appears in the
display.
Compartment Cover.
¤
¤
1
2
2) Complete the following steps to move the Print Cartridge Carrier
into the installation position.
a) Press Setup repeatedly until CARTRIDGE appears in the
display.
b) Press ˆ or ¤ until CHANGE CAR. appears in the second
row of the display.
Press ˆ or ¤ until ALIGN
CAR. appears in the second
row of the display.
[CARTRIDGE]
ALIGN CAR.
c) Press Enter/Select.
The print cartridge carrier moves to the far left side of the printer.
Press the Enter/Select button.
PRINTING
III
3 The printer automatically prints
Do not pull the Print Cartridge Carrier by hand.
an alignment test page.
3) Pull forward on the print cartridge until it releases from the Print
Enter the alignment value.
ALIGN CARTRIDGE
13 [00-30]
Cartridge Carrier.
Once the cartridge alignment
¤
A
4
test page has printed the
display looks like the one at
left.
4) Pull up the print cartridge to remove it.
Continue with ‘To change the alignment value’ on page 2-15.
To install the print cartridge
5
Continue from step 4 of ‘Installing the Print Cartridges’ on
page 2-10 .
Maintaining Your Printer
Maintaining Your Printer
9-2
9-3
Download from Www.Somanuals.com. All Manuals Search And Download.
09-M30UK(9-2 to 10-3) 5/22/00 3:30 PM Page 4
Cleaning Your Printer
The following sections take you through the process of cleaning
the print cartridge printheads.
To clean the printheads
To wipe the printheads
Run CLEAN CAR. to clean the printheads.
A test line prints so that you can see if the cleaning process was
successful.
1) Remove the print cartridge from the printer.
If you need help, see ‘To Remove the Print
Cartridge’ on page 9-2.
Copper Contact
Area
Clean the printheads:
I
When you suspect the printheads are clogged.
When characters are not printing completely.
2) Use a clean, damp cloth to gently wipe
the entire copper contact area and the
printheads as shown.
I
1) Press the Setup button until
When cleaning
the colour print
cartridge wipe
the printheads
in one direction
so the colours
do not mix.
[CARTRIDGE]
CARTRIDGE appears in the display.
¤
¤
CHANGE CAR.
3) Allow the copper contact area to dry.
Printhead
2) Press ˆ or ¤ until CLEAN CAR.
appears in the second row of the
display.
[CARTRIDGE]
CLEAN CAR.
4) Reinstall the print cartridges.
If you need help, see ‘Installing the Print Cartridges’ on page 2-10.
3) Press the Enter/Select button.
The printer prints the printheads
cleaning test page.
PRINTING
III
5) Close the Scanner Bed.
6) Repeat the cleaning printheads test.
If you need help, see ‘To clean the printheads’ on page 9-4.
7) If the cleaning printheads test page still contains broken lines,
4) If the printheads cleaning test
page still contains broken lines,
see ‘To Wipe the
see ‘Cleaning the Print Cartridge Carrier Contacts’ on page 9-6.
printheads’ on page 9-5.
To clean the Scanner Bed
The printer slows down copying and scanning performance if the
Scanner Bed is dirty. Keep the bed clean.
1) Unplug the power cord.
2) Lift the Printer Top Cover.
The printer returns to Ready Mode after
the test page.
Scanner
3) Use a clean, damp cloth to
Bed
clean the bed.
Troubleshooting
Maintaining Your Printer
9-4
9-5
Download from Www.Somanuals.com. All Manuals Search And Download.
09-M30UK(9-2 to 10-3) 5/22/00 3:30 PM Page 6
Printing the Help List
Cleaning the Print
The Help list contains the information about all of the functions
currently available.
Cartridge Carrier Contacts
Clean the Print Cartridge Carrier Contacts only if you have run the
printheads cleaning test, wiped the printheads, and print quality is
not satisfactory.
Remove the print cartridge from the printer.
If you need help, see ‘To Remove the Print Cartridge’ on page
9-2.
[MAINTENANCE]
¤ HELP LIST
Press the Setup button until
MAINTENANCE appears in
the display.
1
1
2
Use a clean, dry cloth to clean the Cartridge Carrier Contacts
inside the Print Cartridge Carrier.
Press the Enter/Select button
when HELP LIST appears on
the second line of the display.
PRINTING
III
2
The printer prints the Help list.
Cartridge Carrier
Contacts
Reinstall the print cartridge.
If you need help, see ‘Installing the Print Cartridges’ on
page 2-10.
3
Close the Scanner Bed.
4
If the print quality is not improved after this cleaning
process, replace the print cartridges you are currently
using with new ones. For more information,
see ‘Replacing Print Cartridge’ on page 9-2.
Troubleshooting
Maintaining Your Printer
9-6
9-7
Download from Www.Somanuals.com. All Manuals Search And Download.
09-M30UK(9-2 to 10-3) 5/22/00 3:30 PM Page 8
Restoring the Menu to the
10
Chapter
Default Setting
To disable the menus so that changes cannot be made to the
printer default setting:
Troubleshooting
To restore factory defaults
Press the Setup button until
MAINTENANCE appears in the
display.
[MAINTENANCE]
HELP LIST
¤
¤
1
Overview
Most printer problems can be easily solved by
going through simple check lists and tests.
The most frequent problems have been divided
into several categories, as listed below.
Press ˆ or ¤ until RESTORE
DEFAULT appears in the
second row of the display.
[MAINTENANCE]
RESTORE DEFAULT
2
3
Clearing paper Jams
Error Messages
General Printing Problems
Poor Print Quality
Scanning Problems
OCR Problems
Press the Enter/Select button.
COMPLETED!!
DEFAULT SETTINGS
The printer restores the factory
default.
NORMAL A4
100%
01 PAGES
Troubleshooting
Troubleshooting
9-8
10-1
Download from Www.Somanuals.com. All Manuals Search And Download.
09-M30UK(9-2 to 10-3) 5/22/00 3:30 PM Page 10
Clearing Paper Jams
By carefully selecting print media and loading them properly,
you should be able to avoid most paper jams.
Paper jams while the printer is feeding
Paper jams while printing
Pull the Input Tray completely out of the
Open the Rear Cover by pushing the
1 printer.
1 metal clips at each end of the cover.
Output Tray
Input Tray
Pull the paper out gently and slowly.
Lift the Output Tray.
2
2
Pull the paper up and toward you to
Push on the Rear Cover until it snaps
3
4
remove it.
3
4
into place.
Press the Stop/Restore button.
The error message disappears.
Press the Stop/Restore button.
The error message disappears.
REMOVE PAPER JAM
THEN PRESS STOP
REMOVE PAPER JAM
THEN PRESS STOP
Replace the Input Tray and
5lower the Output Tray.
I
If you cannot get a firm grasp on the jammed paper,
it may be easier to remove it from the Rear Cover.
See ‘Paper jams while printing’ on page
10-3 for more information.
Troubleshooting
Troubleshooting
10-3
10-2
Download from Www.Somanuals.com. All Manuals Search And Download.
10-M30UK(10-4 to 10-17) 5/22/00 3:32 PM Page 4
Continued
Cleaning Paper Jams
Error Messages
The following table explains the various messages that
may appear on your printer display.
Tips for Avoiding Paper Jams
If jams occur frequently, make sure you are following these tips to avoid jams :
Message
Meaning and Required Action
●
●
CHECK PAPER
THEN PRESS STOP
Follow the procedures in 'Loading paper into the Input Tray' on page 2-8
to load paper properly.
Press the Stop/Restore button after loading the
paper in the Input Tray.
Do not overload the Input Tray. Never exceed the maximum capacity of
150 sheets of paper in the tray.
The printer detects a paper jam. Remove the
jammed paper and press the Stop/Restore
button. See 'Clearing paper jams' on page 10-2.
REMOVE PAPER JAM
THEN PRESS STOP
●
●
●
●
●
●
●
When using the Manual Feeder, feed only one sheet of print media at a time.
Do not remove the Input Tray while the printer is printing.
Flex, fan, and straighten the paper before loading it.
Do not load wrinkled, creased, damp, or highly curled paper.
Do not mix paper types.
The original size is too big, so that the printer
cannot print the multi-same images on a single
page.
DOCUMENT IS BIG
SET SMALL CLONE
Make sure the recommended print side is face down for printing.
Store print media in an acceptable environment.
The printer lacks the memory for collation.
To cancel the job, press Enter/Select.
To continue collating, press Stop/Restore.
CANCEL COLLATE ?
Y:ENTER N:STOP
The printer ran out of paper in POSTER COPY.
Install the paper and press Enter/Select to
continue, or press Stop/Restore to cancel it.
RESUME POSTER ?
Y:ENTER N:STOP
The printer lacks the memory.
MEMORY FULL...
PC SCANNING...
PC PRINTING...
ALL CAR. EMPTY
The printer is scanning from your PC.
The printer is printing a job received from your PC.
The Black and Colour cartridges are not installed or
improperly installed in the Print Cartridge Carrier.
Troubleshooting
Troubleshooting
10-4
10-5
Download from Www.Somanuals.com. All Manuals Search And Download.
10-M30UK(10-4 to 10-17) 5/22/00 3:32 PM Page 6
Continued
Error Messages
Smart Media messages
Message
Message
Meaning and Required Action
Meaning and Required Action
The Black or Photo cartridge is not installed or
improperly installed in the Print Cartridge Carrier.
RIGHT CAR. EMPTY
This message is displayed when the Smart Media
Card is inserted into the slot.
SMARTMEDIA CARD
CHECKING...
LEFT CAR. EMPTY
The Colour cartridge is not installed or improperly
installed in the Print Cartridge Carrier.
This message is displayed when the Smart Media
Card is removed from the slot.
SMARTMEDIA CARD
REMOVED...
Check the print cartridge to make sure that it is
properly installed in the print cartridge carrier.
See 'Installing the print cartridges' on page 2-10
for more information.
CHECK CARTRIDGE
The Smart Media Card is not installed correctly.
See ‘About Smart Media Card’ on page 7-2
for more information.
INSERT CARD WITH
METAL SIDE DOWN
The images on the Smart Media card are
uploading into your PC.
PC UPLOADING...
PC DOWNLOADING..
PLEASE CHANGE
PHOTO CARTRIDGE
Change the Photo cartridge with the Black cartridge.
The images are downloading from your PC into
the Smart Media Card.
The system error occurs to the printer, so that
the printer cannot print continually.
SYSTEM ERROR
The Smart Media Card is formatted.
FORMATTING...
SMARTMEDIA CARD
Remove the jammed paper and press the
Stop/Restore button.
REMOVE PAPER JAM
THEN PRESS STOP
PRESS STOP TO
CLEAR SYSTEM ERR
Press the Stop/Restore button.
The Smart Media Card is only relevant to the SCX-1000S.
This message means the printer is returned to
normal.
SYSTEM INITIAL..
PLEASE WAIT
Troubleshooting
Troubleshooting
10-7
10-6
Download from Www.Somanuals.com. All Manuals Search And Download.
10-M30UK(10-4 to 10-17) 5/22/00 3:32 PM Page 8
Continued
Error Messages
Smart Media messages Continued
Smart Media messages Continued
Message
Meaning and Required Action
Message
Meaning and Required Action
If the Smart Media Card is not formatted,
the message is displayed for about 2 seconds.
NOT FORMATTED
The printer is processing the file from the Smart
Media Card, but an error occurs.
FILE FORMAT ERR
CHECK FILE
1) Check that the Smart Media Card is inserted correctly
To format the Smart Media Card, press Enter/Select.
Press Stop/Restore if you do not wish to format.
FORMAT
Y:ENTER N:STOP
2) Check that the file you want to print is a JPEG standard
file (24 bit True Colour). The printer can print only
JPEG Standard files.
If the printer prints images in thumbnails, load
A4 or Letter size paper into the Input Tray and
press the Enter/Select.
INSERT A4/LETTER
THEN PRESS ENTER
The printer cannot process the file or directory
stored on the Smart Media Card.
SMARTMEDIA ERROR
CHECK CARD
1) Check that the Smart Media Card is inserted correctly.
Check the file or directory stored on the Smart
Media Card.
SMARTMEDIA CARD
NO FILE/DIR
2) Remove the Smart Media Card, and then insert it
again.
3) Unplug the power cord, and then plug in it again.
There is no image file stored on the Smart Media
card but you tried to print it.
FILE NOT FOUND
JPEG FILE SIZE
IS BIG
The size of JPEG Standard file is too big to process.
The file size should be smaller than 3MB for thumbnail
and 5MB for image printing.
The directory has a file or more. To delete it, you
have to delete all files under that directory.
DIRECTORY
NOT EMPTY
Check that the write-protect sticker is adhered on the
Smart Media Card.
ALREADY LOCKED
CHECK CARD
The printer is storing the job on the Smart Media
Card, but the memory used to store the images
is full.
SMARTMEDIA CARD
MEMORY FULL
Delete unnecessary files.
Troubleshooting
Troubleshooting
10-8
10-9
Download from Www.Somanuals.com. All Manuals Search And Download.
10-M30UK(10-4 to 10-17) 5/22/00 3:32 PM Page 10
General Printing Problems
Selecting the Default Printer
If you did not select this printer as the default, you’d better select it as the default
printer before attempting to print a document.
Problem
Cause & Solution
●
●
●
The paper does not feed
into the printer
Make sure the print media is loaded correctly.
Remove and re-insert paper correctly.
There is too many sheets in the Input Tray.
Remove some papers.
To set the default printer, proceed as follows:
1) Select Start ● Settings ● Printers from the Windows task bar.
2) Double-click the Samsung SCX-1000 Series icon.
3) Select File ●●Default Printer.
Do not mix paper types.
●
●
The data does not print
correctly
The printer cable is not connected properly.
Problem
Cause & Solution
The printer driver may be incorrectly installed.
Remove the existing printer driver, and re-install it.
●
●
●
The printer does not
print
Check if the power cord is plugged in.
The printer cable is not connected properly.
The printer cable is defective. Check the cable
and replace it, if necessary.
The printer port is configured incorrectly.
Check Pinter Setting in Windows to make sure
that the print job is being sent to the correct
port (for example, LPT1).
●
●
●
●
●
Printing is too slow
Adjust the print quality setting.
Graphics print more slowly than text.
Colour prints more slowly than black and white.
Special media prints more slowly than plain paper.
Another running application affects print speed.
Close the running program if not required.
●
●
●
●
A paper jam has occurred. Remove the jammed
paper.
This printer is not selected as the default.
Check the default printer.
The printer driver may be incorrectly installed.
Remove the existing printer driver, and re-install
the printer driver.
●
●
Printer prints, but no
characters appear
Make sure the tape is removed from the
printhead.
See 'Installing the Print Cartridges' on page 2-10
for more information.
Check the print cartridges to be sure they are
correctly installed. See 'Installing the Print
Cartridges' on page 2-10 for more information.
Check to see if the print cartridge ink is low or
empty.
●
●
Make sure print media is loaded in the printer.
Troubleshooting
Troubleshooting
10-10
10-11
Download from Www.Somanuals.com. All Manuals Search And Download.
10-M30UK(10-4 to 10-17) 5/22/00 3:32 PM Page 12
Print Quality Problems
Problem
Cause & Solution
Problem
Cause & Solution
●
●
Print is too light or
blurred
Make sure the Print Quality setting is set to
Normal. See Print Quality on page 5-9 for more
information.
Entire page is white
The page layout is too complex.
Simplify the page layout. Delete any unnecessary
graphics.
●
●
●
●
●
●
●
Check to see if the print cartridge ink is low or
empty.
If you are printing on an uneven print surface,
change the paper type setting.
If there is a recommended print size for the paper,
load the proper paper.
Clean the printheads. If the printhead cleaning test
page still contains broken lines, clean the Print
Cartridge Carrier Contacts.
Check the paper orientation.
Make sure the paper size is set correctly.
Make sure you are using the correct cable;
IEEE-1284 compliant parallel cable.
Load the correct paper in the printer or change the
paper size in the Print Setup dialog box.
●
●
●
Printed colour does not
match screen colour
The ink in the colour cartridge is too low. Replace the
colour print cartridge.
Clean the printheads.
●
Characters print askew
Align the print cartridge.
●
●
Black and White is
printing instead of
colour
Make sure the Document Type is set correctly.
The black print cartridge may be installed in the
colour Carrier Slot. Replace with the colour print
cartridge.
●
Adjust the Print Quality to Normal.
●
●
Characters print with
White lines
Check to see if the print cartridge ink is low or
empty.
Remove and re-install one of the print cartridges.
See 'Replacing Print Cartridges' on page 9-2 for
more information.
Clean the printheads. If the cleaning printheads
test page still contains broken lines, clean the
Print Cartridge Carrier Contacts.
●
Colour print quality is
poor
Make sure the Paper Type is appropriate for the
paper you loaded.
Change the Print Quality to High or Normal.
If there is a recommended print side for the paper,
load the paper correctly.
●
●
●
●
●
Incorrect character print
This printer is not selected as the default. Check
the default printer.
Make sure you are using the correct cable. Use
IEEE-1284 compliant parallel cable.
Troubleshooting
Troubleshooting
10-13
10-12
Download from Www.Somanuals.com. All Manuals Search And Download.
10-M30UK(10-4 to 10-17) 5/22/00 3:32 PM Page 14
Scanning Problems
Problem
Cause & Solution
Problem
Cause & Solution
‘The scanner driver is
not installed or an
operation environment
is not set up properly.
Re-install the scanner
driver and try again’
message appears on the
screen
File setting required for I/O may not be proper.
Follow the instructions below :
1) Start your windows.
2) Select Run from Start menu.
3) Type sysedit, then click OK.
●
The printer does not
scan
Make sure your original is placed face down on
the Scanner Bed.
Make sure the printer cable is connected properly.
The printer lacks the memory for scanning.
The printer cable is defective.
●
●
●
4) Select SYSTEM.INI file, and set the file as shown
If necessary, replace the cable.
below.
•
[386 Enh]
●
●
The printer scans very
slowly
Graphics are scanned more slowly than text.
Communication speed becomes slow in scan
mode because a lot of memory is required to
analyze and reproduce the scan image. Set your
computer to ECP mode through BIOS setting. It
will help to increase the speed. For details on
how to set BIOS, refer to the document of your
computer.
•
device = vecp.386
•
LPT1TurnAroundDelay = 50
5) Restart your Windows.
●
‘Port is disabled.
I/O error occurs during scanning.
Close the unnecessarily running program.
Check if the port is
properly connected, or
power is on. Then
restart your computer’
message appears on the
screen
Check the basic cable and the cable connection.
If you still have the same message, open the
system.ini file in the windows directory as described
above, and increase the time as much as required in
increments of 10.
‘Scanner is busy
Your scanner may be used for scanning and faxing.
When the current job is completed, try again.
receiving or printing
data. When the current
job is completed, try
again’ message appears
on the screen
‘Memory is not enough
to save the scan image.
Exit all applications if
not required, then try
again after memory
becomes available’
message appears on the
screen
There is not enough memory to save the scan
image. Exit all applications currently open, if not
required, in order to save memory.
‘The selected port is
currently being used.
Restart your computer
and try again’ message
appears on the screen
Scan error occurred and the scanning has not been
completed properly. Restart your computer and try
again.
Troubleshooting
Troubleshooting
10-15
10-14
Download from Www.Somanuals.com. All Manuals Search And Download.
10-M30UK(10-4 to 10-17) 5/22/00 3:32 PM Page 16
Continued
Scanning Problems
OCR Problems
Problem
Cause & Solution
Problem
Cause & Solution
●
The original document is scanned with improper
brightness or too low resolution. Adjust the
scanning brightness to medium in your scanning
application.
The recognized page
contains many
unrecognized words
‘Scanning has failed.
Restart your scanner
and try again’ message
appears on the screen
Scan error occurs. Turn the printer off and back
on. If you still have the same problem, restart
your computer.
●
●
The original document contains wrong text
language. You can recognize English text only.
You have set wrong text type. Text type is set in the
AnyPage Lite system automatically. But if you have
to recognize typewritten or matrix printer texts, set
the corresponding text type to increase recognition
accuracy. Do not forget to set the switch back to
Auto position if you are recognizing text, which are
neither typed on a typewriter nor printed on matrix
printer in draft mode.
After scanning, scan
program is not closed
If Samsung TWAIN UI is used for scanning,
you must close the Samsung TWAIN UI program.
Part of data is not
automatically scanned
Match scan area of the image being scanned to
the data size.
The result of automatic
segmentation is not
correct
In most cases the system analyzes text layout
successfully. But if there are mistakes, you can mark
blocks manually.
The system does not
load your image file
You may be trying to load an image file of a format
not supported in AnyPage Lite.
●
AnyPage Lite can load image files in the following
formats: BMP, PCX, DCX, JPEG, TIFF.
●
AnyPage Lite can save images in the following
formats: BMP, PCX, JPEG, TIFF.
●
AnyPage Lite does not offer the scan feature.
Scanning is not
achieved in AnyPage
Lite.
It provides only the recognizing feature of the
scanned image.
Troubleshooting
Troubleshooting
10-17
10-16
Download from Www.Somanuals.com. All Manuals Search And Download.
11-M30UK(10-18 to A-9) 5/22/00 3:27 PM Page 1
Appendix
Memo
Specifications
General Specifications
specification
Item
Rated AC power input
110 ~240V AC (Universal)
Under 15W (Standby)
Average power
consumption
Under 35W (Operation Mode)
Machine Size
444 x 369 x 258 mm
7.8 kg
Machine Weight
Temperature
5~40°C (40~104°F)
Operating Condition
Humidity
20% RH ~ 80% RH
16~32°C (60~90°F)
Temperature
Recommended
Operating Condition
Humidity
40% RH ~ 70% RH
Ink Cartridge
See page 2-15 for part numbers
Appendix
A-1
Troubleshooting
10-18
Download from Www.Somanuals.com. All Manuals Search And Download.
11-M30UK(10-18 to A-9) 5/22/00 3:27 PM Page 2
Copier
Printer
specification
specification
Black and Colour
Flat-bed
Item
Item
Technology
Engine Type
Colour Thermal Inkjet
Copy Mode
2-pen (K and CMY)
Scanner Type
Maximum Original Size
Operating System
Interface
Windows 95/ 98/ NT 4.0 (See page 2-18)
A4 (210 x 297 mm)
A4 (210 x 297 mm)
300 x 600 dpi
IEEE 1284 (ECP Support),
USB (Windows 98 only, without HUB Mode)
Maximum Paper Size
Optical Resolution
Emulation
HBP (GDI)
Mono
9 ppm draft, 7 ppm normal
Copy Quality
Draft, Normal, Best
Draft: 4 cpm
Print Speed
Colour 4.5 ppm draft, 2 ppm normal
Mono Copy Speed (A4)
Colour Copy Speed (A4)
Draft
300 x 600 dpi
Print Resolution
(H x V)
Draft: 1.5 cpm
Normal 600 x 600 dpi
Top
Bottom
Each side : 6.5 mm
: 3.4 mm
: 19.05 mm
Best
1200 x 1200 dpi
Effective Print-edge
Margin
Maximum Paper Size
Effective Printing Width
Output Tray Capacity
Input Paper Capacity
A4 (210 mm x 297 mm), See page 4-2 for paper sizes
203 ± 1 mm
Multicopy
99 pages
Maximum 50 sheets
Maximum 150 sheets
6 ft. / 1.8 m.
Reduction & Enlargement
Contrast Control
25% to 400% (1% increments)
3 steps
Maximum Printer Cable
Length
Scanner
specification
TWAIN Standard
Item
Compatibility
Device
Platen Color CIS (Contact Image Sensor)
Max (216 x 297 mm) Effective (210 x 291 mm)
Internal 30 bit
Scanning Area
Colour Depth
Optical Resolution
Interpolation Resolution
Pre-scan Mode
300 x 600 dpi
Maximum 4800 dpi
Yes, 75 dpi
Appendix
Appendix
A-3
A-2
Download from Www.Somanuals.com. All Manuals Search And Download.
11-M30UK(10-18 to A-9) 5/22/00 3:27 PM Page 4
Replacing the Fitted Plug
Guarantee
Important
Limited Guarantee
The mains lead for this machine is fitted with a standard (BS 1363) 13 amp plug
and has a 13 amp fuse. When you change or examine the fuse, you must re-fit
the correct 13 amp fuse. You then need to replace the fuse cover. If you have lost
the fuse cover, do not use the plug until you get another fuse cover from the peo-
ple from whom you bought the machine.
We guarantee that this product has no faulty parts.
If the machine breaks down during the guarantee period and this is caused by
improper workmanship or a fault, we will repair or replace the machine.
The 13 amp plug is the most widely used type in the UK and should be suitable.
However, some buildings (mainly old ones) do not have normal 13 amp plug sock-
ets. You need to buy a suitable plug adaptor. Do not remove the moulded plug.
All repairs done under the guarantee must be done by a service centre we have
authorized. You must keep the receipt as proof when you buy the machine. You
must give this receipt to the service centre if they ask for it.
Warning
Exclusions
If you cut off the moulded plug, get rid of it straight away. You cannot
rewire the plug or you may get an electric shock if you put it into a socket.
This guarantee does not cover damage caused by:
• an accident;
• fire;
• flood;
• acts beyond our control;
Important warning: You must earth this
machine
• misusing the machine;
• using an incorrect line voltage;
• not installing it properly;
The wires in the mains lead have the following colour code:
G Green and Yellow
G Blue
: Earth
: Neutral
: Live
• unauthorized repairs;
• using the machine to make a project; and
• damage that occurs when the machine is being transported.
The guarantee does not cover the machine’s appearance, lamps and glass.
G Brown
If the wires in the mains lead do not match the colours marked in your plug, do
the following:
You must connect the green and yellow wire to the pin marked by the letter ‘E’, or
by the safety ‘Earth symbol’ or coloured green and yellow or green.
Any changes to the machine which are explained in the guide to using your
Samsung printer are not covered under the terms of the guarantee. This guaran-
tee will not apply if your machine does not have a serial number or the serial num-
ber is changed. This guarantee only applies to the machines bought and used in
the United Kingdom.
You must connect the blue wire to the pin which is marked with the letter ‘N’ or
coloured black.
In very rare circumstances your electricity supply may be hit by lightning. If it is
likely that there will be a thunder storm, disconnect your machine from electricity
supply.
You must connect the brown wire to the pin which is marked with the letter ‘L’ or
coloured red.
Samsung Electronics (UK) Ltd.
Stafford Park 12, Telford
Shropshire TF3 3BJ
You must have a 13 amp fuse in the plug, adaptor, or at the distribution board.
Appendix
Appendix
A-5
A-4
Download from Www.Somanuals.com. All Manuals Search And Download.
11-M30UK(10-18 to A-9) 5/22/00 3:27 PM Page 6
Index
Colour
Installing
Print Cartridge
Printer Software
Internet connection
Interface
Interpolation Resolution
A
E
Button
3-3
2-10
2-17
2-23
2-4, A-2
A-2
Cartridge
Copy Speed
Depth
2-15
A-3
A-2
A-2
Acrobat Reader
Advanced Tab
Air Brush
2-20
5-10
5-10
ECP
10-14
A-2
A-2
3-3, A-3
4-2, 4-5
10-5
Emulation
Engine Type
Enlargement
Envelope
Error Messages
Executive
E-mail
Compatibility
Connecting
Alignment
test page
2-13, 2-14
2-15
Power Cord
Parallel Cable
LAN
2-7
2-4
2-23
2-6
1-4, 3-2, 3-4
2-10
J
value
AnyPage Lite
Application program
Automatic
A4
2-17
2-17
5-9
4-2
4-2
2-17, 2-23
JPEG
7-4, 10-9
USB
Control Panel
Copper Contact Area
Copy
L
F
Contrast
Page
Resolution
Size
Mode
Quality
Scale
6-4
3-3
6-4
6-5
A-3
A-3
6-5
B
Letter
Lighten
Line Art
Loading Paper
4-2
3-3, 6-4
5-10
2-8
Fax Modem
Fax Message
Feature
File format
Fine Dither
2-22
2-17
5-7
10-9
5-10
BIOS
10-14
Black
Button
Cartridge
Colour
Buttons
B5
3-3, 6-6
2-15
5-9
3-2
4-2
M
D
Machine Size
Maintenance
Manual Paper Feeder
Maximum
A-1
2-16, 3-2
1-5, 4-5
H
Darken
Device
Diskettes
Display
Docu m ent
Tab
3-3, 6-4
A-2
2-26
3-4
C
Hagaki
Halftone
Handle
Hardware Requirements
Help List
4-2
5-10
1-4
2-18
9-7
A-1
Original Size
Paper Size
Printer Cable Length
Resolution
A-3
A-2, A-3
A-2
1-3
4-2
Cartridge
Carrier Contacts
Compartment Cover
Tab
9-6
1-6
5-5, 5-6, 5-8,
5-9, 5-10
2-11
5-9
10-13
3-3, 6-4
Humidity
Media Size
Menu Button
Mono
Collate
Copy Speed
Multiple Copies
Typ e
3-3
Draft
Type
I
Check
3-3, 6-6
A-3
6-3, A-3
Cartridge
Paper
10-6
10-5
Image
5-10, 7-5
Deleting
Storing
Important Precautions
Installation diskettes
7-6
7-7
i
Cleaning
Scanner Bed
Paper Jam
Clone Copy
Collate
9-5
10-2
3-3, 6-7
5-8, 6-6
2-26
Appendix
Appendix
A-6
A-7
Download from Www.Somanuals.com. All Manuals Search And Download.
11-M30UK(10-18 to A-9) 5/22/00 3:27 PM Page 8
Print
Self test
Single Copy
Smart Media Card
2-16
6-2
7-2, 10-9, 2-17
1-4
10-8
1-4
1-3, 2-17
2-18
3-3, 6-6
A-1
2-4
N
W
Button
Cartridge
3-3
Natural color
Normal
N-up Copy
5-9
3-3, 6-4
3-3, 6-8
Weight
Aligning
Install
Remove
Replacing
9-3
2-10
9-2
9-2
7-5
A-2
5-9, 10-12
A-2
Function Button
Memory full
Slot
Machine
Media
A-1
4-3
2-18
Windows 95/ 98/ NT 4.0
SmarThru 2
Mode
Speed
Quality
Software Requirements
Special Copy Button
Specifications
Cable
O
Z
Resolution
Printheads
Copier
Printer
Scanner
A-3
A-2
A-2
5-4
OCR
1-3, 2-17, 10-17
A-2
A-2, A-3
5-5
5-8
Zoom Rate
3-3, 6-5
Clean
Wipe
9-4
9-5
Operating System
Optical Resolution
Options Tab
Orientation
Status Tab
System Error
10-6
Q
T
P
Quality Tab
5-9
Technology
Temperature
Thumbnail
Top Cover
Troubleshooting
TWAIN UI
A-2
A-1
7-4
1-4
10-1
10-16
Paper
R
Guideline
Input Tray
Jams
Output Tray
Size
Source
Tab
Type
4-4
1-4, 2-8
10-2
1-4
5-8, 7-5, 8-2
5-8
Rear Cover
Reduction
Remove
Paper Jam
Smart Media Card
Restore Default
1-5
3-3, A-3
10-2, 10-5
10-7, 7-2
9-8
5-8
U
8-3, 5-9, 10-13
Root Directory
7-3
Uninstall
Printer driver
SmarThru 2
USB
Parallel Interface
Part number
Photo
Cartridge
Size
Post card
Poster Copy
Power Connector
Power Cord
ppm
1-5
2-15
2-25
2-25
S
2-11, 2-15
7-5
4-2
3-3, 6-9
1-5
2-2
Safety Information
Scan
i
Cable
Port
2-2, 2-6
1-5
Button
Scan to E-mail
Scan to FAX
Scan to OCR
3-3
1-3
1-3
1-3
1-3
1-4
A-3
A-2
V
1-3, A-2
A-2
Scan to Smart Media
Pre-scan Mode
Vivid Color
5-9
Scanner Bed
Scanner Type
Scanning Area
Appendix
Appendix
A-8
A-9
Download from Www.Somanuals.com. All Manuals Search And Download.
|