Samsung MP3 Player DVD V8650 User Guide

Instruction Manual  
DVD-V8650  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SAFETY INSTRUCTIONS  
Precautions  
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT  
REMOVE THE COVER (OR BACK).  
NO USER-SERVICEABLE PARTS ARE INSIDE. REFER  
SERVICING TO QUALIFIED SERVICE PERSONNEL.  
This symbol indicates  
important instructions  
accompanying the product.  
This symbol indicates “dangerous voltage”  
inside the product that presents a risk of  
electric shock or personal injury.  
Do not install this equipment in a confined space such as a bookcase or similar unit.  
WARNING : To prevent damage which may result in fire or electric shock hazard, do not expose  
this appliance to rain or moisture.  
Note to CATV system installer: This reminder is provided to call CATV system installer’s attention to Article  
820-40 of the National Electrical Code (Section 54 of Canadian Electrical Code, Part I) that provides guidelines  
for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding  
system of the building as close to the point of cable entry as practical.  
Caution: FCC regulations state that any unauthorized changes or modifications to this equipment may void  
the user’s authority to operate it.  
FCC NOTE (for U.S.A):  
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to  
Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful  
interference in a residential installation. This equipment generates, uses and can radiate radio frequency  
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to  
radio or television reception, which can be determined by turning the equipment off and on.  
The user is encouraged to try to correct the interference by one or more of the following measures.  
• Reorient or relocate the receiving antenna.  
• Increase the separation between the equipment and receiver.  
• Connect this equipment into an outlet on a circuit different from that to which the receiver is connected.  
• Consult the dealer or an experienced radio/TV technician for help.  
This class B digital apparatus meets all requirements of the Canadian Interference --  
Causing Equipment Regulations.  
CLASS 1  
LASER PRODUCT  
KLASSE 1 LASER PRODUKT  
LUOKAN 1 LASER LAITE  
KLASS 1  
LASER APPARAT  
PRODUCTO LÁSER CLASE 1  
ENG-3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SAFETY INSTRUCTIONS  
CAUTION  
THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR  
PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT  
IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVER AND DO NOT REPAIR  
YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.  
Notes:  
This unit can be used only where the power supply is AC 120V, 60Hz. It cannot be used  
elsewhere.  
• This DVD player is designed and manufactured to respond to the Region Management  
Information.  
If the Region number of a DVD disc does not correspond to the Region number of this DVD player,  
the DVD player cannot play the disc.  
• The product unit accompanying this user manual is licensed under certain intellectual property  
rights of certain third parties. In particular, this product is licensed under the following US patents:  
5,991,715, 5,740,317, 4,972,484, 5,214,678, 5,323,396, 5,539,829, 5,606,618, 5,530,655,  
5,777,992, 6,289,308, 5,610,985, 5,481,643, 5,544,247, 5,960,037, 6,023,490, 5,878,080, and  
under US Published Patent Application No. 2001-44713-A1.  
This license is limited to private non-commercial use by end-user consumers for licensed contents.  
No rights are granted for commercial use. The license does not cover any product unit other than  
this product unit and the license does not extend to any unlicensed product unit or process  
conforming to ISO/IEC 11172-3 or ISO/IEC 13818-3 used or sold in combination with this product  
unit.  
The license only covers the use of this product unit to encode and/or decode audio files conforming  
to the ISO/IEC 11172-3 or ISO/IEC 13818-3. No rights are granted under this license for product  
features or functions that do not conform to the ISO/IEC 11172-3 or ISO/IEC 13818-3.  
Handling Cautions  
Before connecting other components to this player, be sure to turn them all off.  
• Do not move the player while a disc is being played, or the disc may be scratched or broken, and the  
player’s internal parts may be damaged.  
• Do not put a flower vase filled with water or any small metal objects on the player.  
• Be careful not to put your hand into the disc tray.  
• Do not place anything other than the disc in the disc tray.  
• Exterior interference such as lightning and static electricity can affect normal operation of this player.  
If this occurs, turn the player off and on again with the POWER button, or disconnect and then reconnect  
the AC power cord to the AC power outlet. The player will operate normally.  
• Be sure to remove the disc and turn off the player after use.  
• Disconnect the AC power cord from the AC outlet when you don’t intend to use the player for long  
periods of time.  
• Clean the disc by wiping in a straight line from the inside to the outside of the disc.  
Disc Storage  
Be careful not to harm the disc because the data on these discs is highly vulnerable to the environment.  
• Do not keep under direct sunlight.  
• Keep in a cool ventilated area.  
• Store vertically.  
• Keep in a clean protection jacket.  
Maintenance of Cabinet  
For safety reasons, be sure to disconnect the AC power cord from the AC outlet.  
• Do not use benzene, thinner, or other solvents for cleaning.  
• Wipe the cabinet with a soft cloth.  
ENG-4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BEFORE YOU START  
Before you start  
Accessories  
Batteries-2EA  
1.5V(AAA)  
(AC43-12002H)  
Video/Audio Cable  
(AC39-00073A)  
Remote Control  
(AK59-00052B)  
Antenna Cable  
(AC39-42001J)  
User’s Guide  
Install Batteries in the Remote Control  
1
Open the battery cover on  
the back of the remote  
control.  
2
Insert two AAA batteries.  
Make sure that the  
polarities (+ and -) are  
aligned correctly.  
3
Replace the battery  
cover.  
If the remote control doesn’t operate properly:  
Check the polarity +, - of the batteries (Dry-Cell)  
Check if the batteries are drained.  
Check if remote control sensor is blocked by obstacles.  
Check if there is any fluorescent lighting nearby.  
ENG-5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TABLE OF CONTENTS  
Table of Contents  
Safety Instructions ........................................................................................................................................2  
Important Safety Instructions ................................................................................................................2  
Precautions ....................................................................................................................................................3  
Before you start ............................................................................................................................................5  
Accessories............................................................................................................................................5  
Install Batteries in the Remote Control ..................................................................................................5  
Chapter 1: Setup  
General Features............................................................................................................................................8  
Disc Type and Characteristics........................................................................................................................9  
Description....................................................................................................................................................10  
Tour of the Remote Control..................................................................................................................12  
Chapter 2: Connections  
Connecting the Antenna Cable ....................................................................................................................13  
Method1: Antenna + DVD-VCR + TV: No Cable box ..........................................................................13  
Method2: Antenna + DVD-VCR + TV: Cable box with many scrambled channels ..............................14  
Method3: Antenna + DVD-VCR + TV: Cable box with a few scrambled channels ..............................14  
Before Connecting the DVD-VCR ..............................................................................................................15  
Connection to a TV ......................................................................................................................................15  
Connection to a TV (Video)..................................................................................................................15  
Connection to a TV (S-Video) ............................................................................................................16  
Connection to a TV (Interlace) ............................................................................................................17  
Connection to a TV (Progressive)........................................................................................................18  
Connection to an Audio System ..................................................................................................................19  
Connection to an Audio System (2 Channel Amplifier) ........................................................................19  
Connection to an Audio System (Dolby digital, MPEG2 or DTS Amplifier)..........................................20  
Connecting a Power Cord & Auto Setup ......................................................................................................21  
Chapter 3: Initial Setup  
Selecting a Menu Language ........................................................................................................................22  
Setting the Clock ........................................................................................................................................23  
Setting the Clock Automatically............................................................................................................23  
Setting the Clock Manually ................................................................................................................24  
Memorizing the Channels ............................................................................................................................26  
Selecting the Video Signal-source ......................................................................................................26  
Storing Channels in Memory (Automatic Method) ..............................................................................27  
Adding and Erasing Channels (Manual Method) ................................................................................27  
Selecting the RF Output Channel ................................................................................................................28  
Selecting the Front Panel Display ..............................................................................................................29  
Setting the Power Off Automatically ............................................................................................................30  
ENG-6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TABLE OF CONTENTS  
Chapter 4: DVD Operations  
Playing a Disc ..............................................................................................................................................31  
Using the Search and Skip Functions ........................................................................................................33  
Using the Display Function ..........................................................................................................................34  
Using the Disc and Title Menu (DVD) ..........................................................................................................36  
Using the Function Menu (DVD) ..................................................................................................................37  
Repeat Play ................................................................................................................................................38  
Slow Repeat Play ........................................................................................................................................40  
Adjusting the Aspect Ratio (EZ View) ..........................................................................................................41  
Selecting the Audio Language ....................................................................................................................43  
Selecting the Subtitle Language ................................................................................................................44  
Changing the Camera Angle ......................................................................................................................45  
Using the Bookmark Function ....................................................................................................................45  
Using the Zoom Function (DVD) ..................................................................................................................47  
How to insert a Memory Card ......................................................................................................................48  
Clips Menu for MP3/WMA/JPEG ................................................................................................................49  
Folder Selection ..........................................................................................................................................49  
MP3/WMA Playback ....................................................................................................................................50  
Program Play & Random Play ....................................................................................................................52  
Picture CD Playback ....................................................................................................................................53  
Using the Setup Menu ................................................................................................................................55  
Setting Up the Language Features ..............................................................................................................56  
Setting Up the Audio Options ......................................................................................................................58  
Setting Up the Display Options ....................................................................................................................60  
Setting Up the Parental Control ..................................................................................................................62  
Chapter 5: VCR Operations  
Inserting and Ejecting a Video Cassette Tape ............................................................................................65  
Playing a Pre-Recorded Video Cassette Tape ............................................................................................66  
Special VCR Playback Features ................................................................................................................67  
Using Automatic Tracking ............................................................................................................................68  
Selecting the Cassette Type ........................................................................................................................69  
Setting the Auto Play ..................................................................................................................................70  
Setting the Auto Repeat ..............................................................................................................................71  
Using the Tape Counter ..............................................................................................................................72  
Using the Assemble Edit Function ..............................................................................................................73  
Selecting the Audio Output Mode ................................................................................................................74  
Searching for a Specific Sequence ............................................................................................................75  
Basic Recording ..........................................................................................................................................77  
Special Recording Features ........................................................................................................................78  
Using One-Touch Recording ......................................................................................................................79  
Selecting the Recording Speed ..................................................................................................................80  
Making a Timer Recording ..........................................................................................................................81  
Chapter 6: Reference  
Using the TV Buttons on the Remote Control ............................................................................................83  
Troubleshooting ..........................................................................................................................................84  
Technical Specifications ..............................................................................................................................86  
ENG-7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 1  
SETUP  
-
-
DVD-RW (VR mode)  
Non-finalizing DVD-RW, -R, DVD+RW, and +R  
disc.  
General Features  
Ability to play back may depend on recording  
conditions.  
DVD-VCR Features  
-
DVD-RW, -R/CD-RW/DVD+RW, +R/CD-ROM  
Perfect compatibility to play back DVDs, audio  
CDs or VHS Tapes.  
Enjoy a DVD movie while recording a TV show  
Note  
This product incorporates copyright protection  
technology that is protected by U.S. patents and  
other intellectual property rights. Use of this copyright  
protection technology must be authorized by  
Macrovision, and is intended for home and other  
limited viewing uses only unless otherwise authorized  
by Macrovision. Reverse engineering or disassembly  
is prohibited.  
to the VCR.  
Auto Setup instantly finds the time and runs  
channel search.  
RF input and output.  
Composite, S-Video, and Component Video  
outputs.  
Remote control provides full operation on  
DVD-VCR.  
On-Screen Program (English/French/Spanish).  
COPY PROTECTION  
Many DVD discs are encoded with copy protection.  
Because of this, you should only connect your DVD-  
VCR directly to your TV, not to a VCR. Connecting to  
a VCR results in a distorted picture from copy-  
protected DVD discs.  
This product incorporates copyright protection  
technology that is protected by methods claims of  
certain U.S. patents and other intellectual property  
rights owned by Macrovision Corporation and other  
rights owners. Use of this copyright protection  
technology must be authorized by Macrovision  
Corporation, and is intended for home and other  
limited viewing uses only unless otherwise  
authorized by Macrovision Corporation. Reverse  
engineering or disassembly is prohibited.  
DVD Features  
10-bit video digital to analog converter and  
54MHz advanced digital filter.  
Playback of 96KHz/24-bit sources.  
DTS digital output for DTS-enhanced DVDs.  
2 slots to support 12 types of memory cards:  
MMC, RS-MMC, SD, Smart Media Card,  
Compact Flash, Micro Drive, Memory Stick,  
Memory Stick-Pro, Memory Stick-Pro Duo,  
Memory Stick Duo, Mini SD Card and XD-  
Picture Card.  
Play back MP3-CDs.  
VCR Features  
PROGRESSIVE SCAN  
OUTPUTS (525p)  
Hi-Fi Stereo VCR.  
Superior slow motion and stop action (with 4  
heads).  
Playback of S-VHS tapes with a better than  
standard resolution.  
INTRO Scan, Zero Return, and END Search.  
7-event/1 month timer recording.  
“CONSUMERS SHOULD NOTE THAT NOT ALL  
HIGH DEFINITION TELEVISION SETS ARE FULLY  
COMPATIBLE WITH THIS PRODUCT AND MAY  
CAUSE ARTIFACTS TO BE DISPLAYED IN THE  
PICTURE. IF 525 PROGRESSIVE SCAN PICTURE  
PROBLEMS OCCUR, IT IS RECOMMENDED THAT  
THE USER SWITCH THE CONNECTION TO THE  
‘STANDARD DEFINITION’ OUTPUT. IF THERE ARE  
QUESTIONS REGARDING YOUR TV SET  
COMPATIBILITY WITH THIS DVD-VCR, PLEASE  
CONTACT SAMSUNG'S CUSTOMER SERVICE  
CENTER.”  
Time remaining counter, real time counter.  
Notes  
Discs which cannot be played with this player.  
-
-
-
-
DVD-ROM/DVD-RAM/VCD  
CDI/CDV  
Super Audio CD (CD, HD layer)  
CDGs play audio only, not graphics.  
ENG-8  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETUP  
Disc Type and Characteristics  
This DVD-VCR is capable of playing the following types of discs with the corresponding logos:  
Recording Types Disc Size Max. Playing Time  
Characteristics  
Disc Types (Logos)  
-
-
DVD contains excellent sound  
and video due to Dolby Digital  
and MPEG-2 system.  
Single-sided 240 min.  
5”  
DVD  
Double-sided 480 min.  
Audio  
+
Video  
Various screen and audio  
functions can be easily selected  
through the on-screen menu.  
Single-sided 80 min.  
Double-sided 160 min.  
3 1/2”  
5”  
-
CD is recorded as a Digital  
Signal with better audio quality,  
less distortion and less  
deterioration of audio quality  
over time.  
AUDIO-CD  
74 min.  
20 min.  
Audio  
3 1/2”  
CD-R,CD-RW and DVD-RW, -R, DVD+RW, +R discs may not be playable in all cases due to the disc  
type or condition of the recording.  
Do not run the player with two discs loaded at the same time.  
Disc Markings  
Region Number  
Both the DVD-VCR and the discs are  
coded by region. These regional codes  
must match in order for the disc to play.  
If the codes do not match, the disc will  
not play.  
~
Play Region Number  
NTSC broadcast system in U.S.A, Canada, Korea,  
Japan, etc.  
NTSC  
Dolby Digital disc  
Stereo disc  
The Region Number for this player is  
described on the rear panel of the player.  
STEREO  
DIGITAL  
SOUND  
Digital Audio disc  
DTS disc  
MP3 disc  
You must only insert one DVD disc at a time. Inserting two  
or more discs will not allow playback and may cause  
damage to the DVD-VCR.  
ENG-9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETUP  
Description  
Front Panel Controls  
1
2
4
3
6
8
11  
12  
13  
14  
15  
16  
5
7
9
10  
1
2
3
4
5
6
DISC TRAY  
Place the disc here.  
OPEN/CLOSE  
Press to open and close the disc tray.  
VCR Deck  
Insert a standard VHS video tape.  
10 DVD/VCR  
Press to view DVD or VCR mode.  
11 EZ VIEW  
The aspect ratio of a picture can easily be  
adjusted to your TV's screen size.  
12  
13  
14  
REC (VCR)  
Press to begin recording.  
(Reverse/Rewind)  
Press to reverse/rewind a disc/video tape.  
EJECT  
Press to eject a video tape if the tape is stopped.  
(POWER)  
Press to turn the DVD-VCR on and off.  
MULTI CARD INPUT  
Insert a Memory Card  
P.SCAN  
Press to select component video out progressive  
scan mode.  
Front Panel Display  
Operation indicators are displayed here.  
(STOP)  
Press to stop a disc/video tape during playback  
or record (VCR).  
15  
16  
(Play/Pause)  
Press to play or pause the disc/video tape.  
(Forward/Fast Forward)  
Press to forward/fast forward a disc/videotape.  
7
8
9
CHANNEL  
and  
Press to change channels.  
Front Panel Display  
1
2
DVD is activated.  
The time, counter position, time remaining or  
current deck status is indicated.  
3
4
5
VCR is activated.  
DVD or CD media is loaded.  
VHS videotape is loaded.  
ENG-10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETUP  
Rear Panel  
1
2
AUDIO OUT  
Connect to the Audio input jacks of your  
television. You can use as audio output terminal  
when Component or S-Video is connected.  
COMPONENT VIDEO OUT  
5
RF IN (FROM ANT.)  
Connect the RF Antenna cable to your DVD-  
VCR.  
6
S-VIDEO OUT  
Use the S-Video cable to connect this jack to the  
S-Video input jack on your television for higher  
picture quality. You can use as audio output  
terminal when Component or S-Video is  
connected.  
- Use these jacks if you have a TV with  
Component Video in jacks.  
R
B
These jacks provide P , P and Y video.  
- If Component (Progressive Scan) Video Output  
is selected in the Alt Video Out menu or by  
using the P.SCAN button on the front panel,  
progressive scan mode will be enabled.  
- If Component (Interlace Scan) Video Output is  
selected in the Alt Video Out menu or by using  
the P.SCAN button on the front panel,  
interlaced scan mode will be enabled.  
LINE IN 1 (VIDEO/AUDIO)  
7
DIGITAL AUDIO OUT (OPTICAL/COAXIAL)  
- Use either an optical or coaxial digital audio  
cable to connect to a compatible Dolby Digital  
receiver.  
- Use either an optical or coaxial digital audio  
cable to connect to an A/V Amplifier that  
contains a Dolby Digital, MPEG2 or DTS  
decoder.  
3
4
Connect to the Video/Audio output jack of your  
external device.  
LINE OUT (VIDEO/AUDIO)  
8
RF OUT (TO TV)  
Connect your DVD-VCR to a TV.  
Use the Video/Audio cable to connect to the  
Video/Audio input jacks on your television.  
You can also use as audio output terminal when  
Component or S-Video is connected.  
DVD/VCR Output Chart  
Type of Connection  
DVD Output Jacks VCR Output Jacks  
O : Active.  
X : Inactive.  
S-VIDEO OUT  
O
O
O
O
O
O
X
X
X
X
O
O
COMPONENT VIDEO OUT  
AUDIO OUT (L,R)  
DIGITAL AUDIO OUT (COAXIAL)  
LINE OUT (A/V)  
RF OUT  
Notes  
Consult your TV User’s Manual to find out if your TV supports Progressive Scan. If Progressive Scan is  
supported, follow the TV User’s Manual regarding Progressive Scan settings in the TV’s menu system.  
If Component (Progressive Scan) Output is selected in Alt Video Out menu, Video and S-Video will not work.  
See pages 60 ~ 61 to get more information on how to use the Alt Video Out menu.  
ENG-11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETUP  
Tour of the Remote Control  
18 VCR button  
Use to operate VCR.  
1
2
3
TV button  
Use to operate TV.  
19 TV/VCR button  
Use to switch between TV  
and VCR mode.  
DVD button  
Use to operate DVD.  
Œ
´
˜
¯
POWER button  
20 OPEN/CLOSE button  
Turns the DVD-VCR’s power  
on and off.  
˘
¿
ˇ
21 ZOOM button  
Enlarges DVD pictures  
4
5
6
NUMBER buttons  
100+ button  
22  
Skip button  
Press to forward skip a disc.  
Use to skip a title, chapter or  
track on a disc.  
Skip button  
¨
Press to reverse skip a disc.  
Use to skip a title, chapter or  
track on a disc.  
23 EZ VIEW/SPEED button  
The aspect ratio of a picture  
can easily be adjusted  
7
8
9
REC button  
Use to begin recording.  
(VCR)  
¸
ˆ
Ø
according to the screen size  
of your TV (16:9 or 4:3).  
Search button  
Press to reverse search a  
disc.  
˛
Use to select the tape  
recording speed. (VCR)  
24  
25  
Search button  
Press to forward search a  
disc.  
Stop button  
Press to stop a disc/video  
tape during play or record  
(VCR).  
(Play/Pause) button  
Press to play or pause the  
disc/video tape.  
10 VOL (+, -) buttons  
˝
11 MENU button  
Brings up the DVD-VCR  
player’s menu.  
26 CH/TRK button  
Use to change channels.  
(TV)  
÷
Ô
12 ENTER/œƒ¦‹ buttons  
This button functions as a  
toggle switch.  
Use to adjust tape tracking.  
(VCR)  
27 AUDIO/TV MUTE button  
Use this to access various  
audio functions on a  
13 SUBTITLE button  
Use to display the DVD’s  
subtitle language.  
disc.(DVD mode)  
Ò
Ú
14 DISC MENU button  
Brings up the Disc menu.  
(DVD)  
®
This operates as Sound  
Mute. (TV mode)  
28 RETURN button  
15 DVD/M.CARD button  
Use to select DVD or  
M.CARD mode.  
Returns to a previous menu.  
Æ
ı
µ
¥
29 INFO. button  
Displays the current disc  
mode. (DVD)  
16 MODE button  
Use to select the program or  
random play.  
30 CLEAR button  
Use to remove menus or  
status displays from the  
screen.  
REPEAT button  
Allows you to repeat play a  
title, chapter, track, or disc.  
(DVD)  
31 MARK/SEARCH button  
Use to memorize scenes for  
replay. (DVD)  
17 F.ADV/SKIP/INPUT SEL.  
button  
Displays the VCR Function  
menu. (VCR)  
Use to advance play one  
frame at a time. (DVD and  
VCR)  
32 ANGLE/TIMER button  
Use to access various  
camera angles on a disc.  
(DVD)  
Use to fast forward a video  
tape. (VCR)  
Use to select a external  
signal source.  
Displays the Manual Clock  
menu.  
ENG-12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 2  
CONNECTIONS  
Connecting the Antenna Cable  
There are several ways to connect your DVD-VCR. Select one of the following antenna connections that best  
suits you below.  
Method 1: Antenna + DVD-VCR + TV: No Cable box  
Method 2: Antenna +Cable box + DVD-VCR + TV: Cable box with many scrambled channels  
Method 3: Antenna + DVD-VCR + Cable box +TV: Cable box with a few scrambled channels  
-
-
-
If you are using an off-air antenna that has 300-ohm twin flat leads, use an external  
antenna connector (300-75 ohm adaptor: not supplied) to connect the antenna to the  
DVD-VCR.  
If you have two separate antennas (one VHF and the other UHF), use a UHF/VHF  
combiner-adaptor (available at most electronics shops) to connect the antenna to the  
DVD-VCR.  
The RF OUT(TO TV) jack of this product sends signals received through the antenna  
and also outputs Audio/Video signals.  
Method1: Antenna + DVD-VCR + TV: No Cable box  
You can record non-scrambled channels by  
selecting the channel on the DVD-VCR.  
Also use this Method if you watch channels  
without cable box.  
To RF IN  
To RF OUT  
Antenna cable  
To Antenna Input  
ENG-13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTIONS  
Method2: Antenna + DVD-VCR + TV: Cable box with many  
scrambled channels  
Wall  
You can record channels by selecting the channel  
on the cable box. You cannot record one channel  
while watching another channel. Be sure that the  
cable box is turned on.  
Cable Box  
To RF IN  
To RF OUT  
Antenna cable  
To Antenna Input  
Method3: Antenna + DVD-VCR + TV: Cable box with a few  
scrambled channels  
Wall  
You can record non-scrambled channels by  
selecting the channel on the cable box.  
You cannot record scrambled channels that  
require a cable box.  
To RF IN  
To RF OUT  
Cable Box  
Antenna  
cable  
To Antenna Input  
ENG-14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTIONS  
Before Connecting the DVD-VCR  
-
Always turn off the DVD-VCR, TV, and other components before you connect or disconnect any cables.  
-
Refer to the user’s manual of the additional components (such as a TV) you are connecting for more  
information on those particular components.  
Connection to a TV  
The following shows examples of connections commonly used to connect the DVD-VCR with a TV and other  
components.  
Connection to a TV (Video)  
1
Using video/audio cables, connect the VIDEO  
(yellow)/AUDIO (red and white) OUT terminals  
on the rear of the DVD-VCR to the VIDEO  
(yellow)/AUDIO (red and white) IN terminals of  
your TV.  
White  
Audio Cable  
Yellow  
2
Turn on the DVD-VCR and TV.  
Red  
Video Cable  
Yellow  
Red  
White  
3
Press the input selector on your TV remote  
control until the Video signal from the DVD-VCR  
appears on the TV screen.  
Notes  
-
Noise may be generated if the audio cable is placed too close to the power cable.  
-
If you want to connect to an Amplifier, please refer to the Amplifier connection page.  
(See pages 19 to 20).  
-
-
-
-
The number and position of terminals may vary depending on your TV set. Please refer to the user's manual  
of your TV.  
If there is one audio input terminal on the TV, connect it to the LINE OUT AUDIO OUT Left (white) terminal of  
the DVD-VCR.  
If you press the P.SCAN button when DVD-VCR is in stop mode or no disc is inserted, the Alt Video Out  
mode changes in the following sequence: (S-Video - Interlace - Progressive)  
When the Alt Video Output in Display setup menu is set to Progressive, the S-Video Outputs do not work.  
ENG-15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTIONS  
Connection to a TV (S-Video)  
-
-
Connecting to your TV using an S-Video cable.  
You will enjoy high quality images. S-Video separates the picture element into black and white(Y) and  
color(C) signals to present clearer images than regular video input mode. (Audio signals are  
delivered through the audio out or line out audio).  
1
Using an S-Video cable (not included), connect  
the S-VIDEO OUT terminal on the rear of the  
DVD-VCR to the S-VIDEO IN terminal of your TV.  
2
Using the audio cables, connect from the AUDIO  
OUT or LINE OUT AUDIO (red and white)  
terminals on the rear of the DVD-VCR to the  
AUDIO (red and white) IN terminals of your TV.  
White  
Red  
Turn on the DVD-VCR and TV.  
S-Video Cable  
(not included)  
Audio Cable  
White  
3
Red  
With the unit in stop mode, set the Alt video  
output to S-Video in the Display Setup menu (see  
pages 60~61) or press the P.SCAN button on the  
front panel until S-Video is output.  
4
Press the input selector on your TV remote  
control until the S-Video signal from the DVD-  
VCR appears on your TV screen.  
Notes  
-
-
If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 19 to 20)  
The number and position of terminals may vary depending on the TV set.  
Please refer to the user's manual of your TV.  
-
-
The S-Video jack only outputs video from the DVD player. To view video from the VCR, you must have the  
Video Out (Yellow) or RF Out jack connected.  
You can hear sound from LINE OUT AUDIO or AUDIO OUT (red and white) terminals for S-Video connection.  
VCR audio only outputs through the Line Out Audio jacks (Red,White).  
ENG-16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTIONS  
Connection to a TV (Interlace)  
-
-
Connecting to your TV using Component video cables.  
You will enjoy high quality and accurate color reproduction images. Component video separates the picture  
B
R
element into black and white(Y), blue(P ), red(P ) signals to present clear and clean images. (Audio signals  
are delivered through the audio out or line out audio).  
1
Using component video cables (not included),  
connect the COMPONENT VIDEO OUT terminal  
on the rear of the DVD-VCR to the COMPONENT  
IN terminal of your TV.  
2
Using the audio cables, connect from the AUDIO  
OUT or LINE OUT AUDIO (red and white)  
terminals on the rear of the DVD-VCR to the  
AUDIO (red and white) IN terminals of your TV.  
Blue  
White  
Red  
Green  
Turn on the DVD-VCR and TV.  
Red  
Audio Cable  
Component Cable  
(not included)  
3
With the unit in stop mode, set the Alt video  
output to Component: Interlace in the Display  
Setup menu (see pages 60~61) or press the  
P.SCAN button on the front panel until Interlace is  
output.  
Green  
Blue  
Red  
White  
Red  
4
Press the input selector on your TV remote  
control until the Component signal from the DVD-  
VCR appears on the TV screen.  
Notes  
-
-
If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 19 to 20)  
The component terminal of your TV may be marked “R-Y, B-Y, Y” or “Cr, Cb, Y” instead of “PR, PB, Y”  
depending on the manufacturer. The number and position of terminals may vary depending on the TV set.  
Please refer to the user's manual of your TV.  
-
-
The Component Video Out jacks only output video from the DVD player. To view video from the VCR, you  
must have the Video Out (Yellow) or RF Out jack connected.  
You can hear the sound from LINE OUT AUDIO or AUDIO OUT (red and white) terminals for Component  
connection. VCR audio only outputs through the Line Out Audio jacks (Red,White).  
ENG-17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTIONS  
Connection to a TV (Progressive)  
1
Using component video cables (not included),  
connect the COMPONENT VIDEO OUT terminal  
on the rear of the DVD-VCR to the COMPONENT  
IN terminal of your TV.  
2
Using the audio cables, connect from the AUDIO  
OUT or LINE OUT AUDIO (red and white)  
terminals on the rear of the DVD-VCR to the  
AUDIO (red and white) IN terminals of your TV.  
Blue  
White  
Red  
Green  
Turn on the DVD-VCR and TV.  
Red  
Audio Cable  
Component Cable  
(not included)  
3
With the unit in stop mode, set the Alt video  
output to Component: Progressive in the Display  
Setup menu (see pages 60~61) or press the  
P.SCAN button on the front panel Progresive  
Scan mode prompt screen appears. Then press  
ENTER and progressive will be output.  
Red  
Blue  
Green  
Red  
White  
4
Press the input selector on your TV remote  
control until the Component signal from the  
DVD-VCR appears on the TV screen.  
To see the progressive video output,  
- Consult your TV User’s Manual to find out if your TV supports Progressive Scan.  
If Progressive Scan is supported, follow the TV User’s Manual regarding Progressive Scan  
settings in the TV’s menu system.  
- Depending on your TV, the connection method may differ from the illustration above.  
Note  
What is "Progressive Scan"?  
Progressive scan has twice as many scanning lines as the interlace output method.  
Progressive scanning method provides better and clearer picture quality.  
The Component Video jacks only output video from the DVD player. To view video from the VCR, you must have  
the Video Out (Yellow) or RF Out jack connected.  
ENG-18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTIONS  
Connection to an Audio System  
Connection to an Audio System (2 Channel Amplifier)  
1
Using the audio cables, connect the (LINE)  
AUDIO (red and white) OUT terminals on the  
rear of the DVD-VCR to the AUDIO (red and  
white) IN terminals of the Amplifier.  
2
Using the video signal cable(s), connect the  
VIDEO, S-VIDEO or COMPONENT OUT  
terminals on the rear of the DVD-VCR to the  
VIDEO, S-VIDEO or COMPONENT IN terminal of  
Red  
White  
your TV as described on pages 15 to 18.  
Audio Cable  
3
Red  
White  
Turn on the DVD-VCR, TV, and Amplifier.  
2-channel  
Stereo Amp.  
4
Press the input select button of the Amplifier to  
select the External input in order to hear sound  
from the DVD-VCR.  
Refer to your Amplifier's user manual to set the  
Amplifier's audio input.  
Notes  
-
Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause damage  
to the speakers and your ears.  
-
-
Please set the audio in the menu screen according to the Amplifier. (See pages 58 to 59)  
The position of terminals may vary depending on the Amplifier.  
Please refer to your Amplifier's user manual .  
-
You can also connect the amplifier using AUDIO OUT (red and white) terminals from the DVD-VCR.  
ENG-19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTIONS  
Connection to an Audio System (Dolby digital, MPEG2 or DTS  
Amplifier)  
1
Using a coaxial cable or optical cable (not  
included), connect the DIGITAL AUDIO OUT  
(COAXIAL or OPTICAL) terminal on the rear of  
the DVD-VCR to the DIGITAL AUDIO IN  
(COAXIAL or OPTICAL) terminal of the Amplifier.  
2
Using the video signal cable(s), connect the  
S-VIDEO or COMPONENT OUT terminals on the  
rear of the DVD-VCR to the S-VIDEO or  
COMPONENT OUT terminal of your TV as  
described on pages 15 to 18.  
Coaxial Cable  
(not included)  
Optical Cable  
(not included)  
3
Turn on the DVD-VCR, TV, and Amplifier.  
Dolby digital or  
DTS Amp.  
4
Press the input select button of the Amplifier to  
select external input in order to hear sound from  
the DVD-VCR.  
Refer to your Amplifier's user manual to set the  
Amplifier's audio input.  
Notes  
-
When you connect the DVD-VCR to DTS Amplifier and play a DTS disc, set the DTS to On in Audio  
Setup menu. If it is set to Off, sound will not be heard, or there will be a loud sound.  
-
Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause damage  
to the speakers and your ears.  
-
-
Please set the audio in the menu screen according to the Amplifier. (See pages 58 to 59)  
The position of terminals may vary depending on the Amplifier.  
Please refer to the user's manual of the Amplifier.  
-
Only audio from the DVD player can be heard when connection is made via the Optical or Coaxial jack. You  
must have the analog L and R Audio Out connection to hear VCR audio. (See page 17)  
ENG-20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTIONS  
Connecting a Power Cord & Auto Setup  
1
Your DVD-VCR's power cord should be plugged  
into a standard 120V/60Hz wall outlet. Avoid  
pressing any buttons on the remote control or on  
the unit during Auto Setup. While your DVD-VCR  
is running Auto Setup, “Auto” will blink. When  
Auto Setup is complete, the current time will be  
displayed on the front panel. If Auto Setup fails to  
You must have the antenna/cable  
connected for the Auto Clock to set  
locate a channel to set the clock, you should set  
the clock manually. (See pages 24 to 25.)  
2
Turn on the power by pressing the POWER  
button on the remote control or  
on the front  
panel.  
3
Turn on your TV by pressing the POWER button  
on the TV remote control.  
4
Press the input selector on your TV remote until  
the signal from the DVD-VCR appears.  
ENG-21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 3  
INITIAL SETUP  
Selecting a Menu Language  
To change the on-screen MENU language to English, French or Spanish, follow these steps.  
1
Press the MENU button.  
2
Press the œꢀƒ buttons to  
select Setup, then press the ‹  
or ENTER button.  
3
Press the œꢀƒ buttons to  
select Language, then press  
the or ENTER button.  
4
Press the œꢀƒ buttons to  
select the appropriate  
language : English, Français  
or Español.  
Press the ENTER button.  
5
Press the MENU button to exit.  
ENG-22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INITIAL SETUP  
Setting the Clock  
This menu is used to set the current time. You need to set the time to use timer recording.  
Setting the Clock Automatically  
1
Press the MENU button.  
2
Press the œꢀƒ buttons to  
select Setup, then press the ‹  
or ENTER button.  
3
Press the œꢀƒ buttons to  
select Clock, then press the ‹  
or ENTER button.  
Notes  
You must have the antenna connected to set  
the Auto Clock. (See pages 13~14)  
The Clock will be automatically set when you  
turn off the DVD-VCR.  
4
Press the œꢀƒ buttons to  
select Auto Clock, then press  
the or ENTER button.  
5
Select a channel that carries a  
time signal by using the or  
ENTER button.  
(Auto, 1, 2, ...., 125)  
ENG-23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INITIAL SETUP  
6
Press the œꢀƒ buttons to  
select Time Zone, then press  
the or ENTER button.  
Select the time zone of your area  
by using the œꢀƒ,¦‹  
buttons, then press the ENTER  
button. Select Automatic to set  
the time zone automatically.  
7
Press the œꢀƒ buttons to  
select Daylight Saving, then  
press the or ENTER button  
to select Yes, No or Auto  
.
8
Press the MENU button to exit.  
Note  
If your clock is set to the wrong Time Zone or  
Daylight Saving, you can adjust these  
settings without turning off the Auto Clock  
Set function.  
Setting the Clock Manually  
If Auto Setup fails to set the DVD-VCR’s internal clock by locating a local TV station, follow these steps to set  
the data and time manually.  
Note: For accurate Timer Recording, your DVD-VCR's internal clock must be set correctly.  
1
Press the MENU button.  
ENG-24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INITIAL SETUP  
2
Press the œꢀƒ buttons to  
select Setup, then press the ‹  
or ENTER button.  
3
Press the œꢀƒ buttons to  
select Clock, then press the ‹  
or ENTER button.  
4
Press the œꢀƒ buttons to  
select Manual Clock, then  
press the or ENTER button.  
5
Use the ¦ꢀ‹ buttons to select  
each of the following options,  
then use the œꢀƒ buttons to  
set each option.  
Press the ENTER button to set  
the clock.  
6
Press the MENU button to exit.  
ENG-25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INITIAL SETUP  
Memorizing the Channels  
Selecting the Video Signal-source  
This feature allows you to manually set the DVD-VCR’s tuner band to Antenna or Cable, whichever you  
connected to the Antenna In jack during initial setup.  
Use this setting only if Auto Setup detected the incorrect tuner band, i.e. channels are coming in on the wrong  
channel numbers.  
1
Press the MENU button.  
2
Press the œꢀƒ buttons to  
select Setup, then press the ‹  
or ENTER button.  
3
Press the œꢀƒ buttons to  
select Channel, then press the  
or ENTER button.  
- Cable TV: Select this if the DVD-VCR  
is connected to Cable TV.  
4
Press the or ENTER button  
to select Cable TV or  
Antenna.  
- Antenna: Select this if the DVD-VCR  
is connected to an indoor or outdoor  
VHF/UHF antenna.  
ENG-26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INITIAL SETUP  
Storing Channels in Memory (Automatic Method)  
Auto Channel Memory will automatically seek and store all active channels in your area.  
5
Press the œꢀƒ buttons to  
select Auto Channel Memory,  
then press the or ENTER  
button.  
The DVD-VCR will  
automatically search for all  
available channels in the  
selected tuner band.  
This procedure may take a few  
minutes to complete.  
Note  
Do not turn the power off when Auto  
Channel Memory function is proceeding.  
If the power is off, Auto Channel Memory  
should be reset.  
When finished, the lowest  
channel found will be  
displayed.  
Adding and Erasing Channels (Manual Method)  
Use this feature if Auto Channel Search missed a channel that you would like to add, or to delete a channel you  
wish to remove.  
6
Press the œꢀƒ buttons to  
select Channel Add/Delete,  
then press the or ENTER  
button.  
CHANNEL ADD/DELETE  
7
Select channel :  
[07]  
Press the CH œꢀƒ¤buttons to  
tune in the channel number  
you wish to add or delete.  
Use the number button to  
select the channel directly.  
and press [  
press [  
] to ADD  
¦] to DELETE  
RETURN  
CH œƒ  
CHANNEL ADD/DELETE  
8
Select channel :  
(in memory)  
[07]  
Press the ¦ or button to  
delete the channel from your  
channel list or to add.  
and press [  
press [  
] to ADD  
] to DELETE  
¦
Repeat steps 7 to add or  
to delete additional channels.  
Note  
RETURN  
CH œƒ  
Use the number button to move the channel  
directly.  
Press the MENU button to exit.  
ENG-27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INITIAL SETUP  
Selecting the RF Output Channel  
Use this feature if the DVD-VCR is connected to your TV using the RF antenna cable.  
1
Press the MENU button.  
2
Press the œꢀƒ buttons to  
select Setup, then press the ‹  
or ENTER button.  
3
Press the œꢀƒ buttons to  
select Channel, then press the  
or ENTER button.  
4
Press the œꢀƒ buttons to  
select RF Output CH, then  
press the or ENTER button  
to select 3CH or 4CH.  
5
Press the MENU button to exit.  
ENG-28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INITIAL SETUP  
Selecting the Front Panel Display  
You can set the Front Panel Display to be bright all the time, dim all the time, or to automatically dim during  
power off.  
1
Press the MENU button.  
2
Press the œꢀƒ buttons to  
select Setup, then press the ‹  
or ENTER button.  
3
Press the œꢀƒ buttons to  
select Front Display, then  
press the or ENTER button  
to select Auto, Bright or Dim.  
4
Press the MENU button to exit.  
Auto: Front Panel Display will dim automatically  
during power off.  
Bright: Front Panel Display will be bright all the time.  
Dim:  
Front Panel Display will be dim all the time.  
ENG-29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INITIAL SETUP  
Setting the Power Off Automatically  
This feature automatically turns off your DVD-VCR if no signal is received and you do not press any buttons for  
the selected time.  
1
Press the MENU button.  
2
Press the œꢀƒ buttons to  
select Setup, then press the ‹  
or ENTER button.  
3
Press the œꢀƒ buttons to  
select Auto Power Off, then  
press the or ENTER button  
to select Off, 1Hr or 2Hr.  
4
Press the MENU button to exit.  
Off: Auto power off is disabled.  
1Hr: DVD-VCR will auto shut off 1 hour after the last button  
is pressed or no signal is received.  
2Hr: DVD-VCR will auto shut off 2 hours after the last button  
is pressed or no signal is received.  
ENG-30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 4  
DVD OPERATIONS  
Playing a Disc  
Before Play  
-
-
Turn on your TV and set it to the correct Video Input on your TV's remote control.  
If you connected an external Audio System, turn on your Audio System and set it to the correct Audio Input.  
Playback  
1
Press the OPEN/CLOSE (  
button on the front panel.  
)
2
Place a disc gently into the tray  
with the disc’s label facing up.  
3
Press the  
(Play/Pause)  
button on your remote control  
or on the front panel.  
Most discs will start to play  
back as soon as the tray  
closes.  
Stop/Resume  
-
Press the (Stop) button once to  
stop playback. To resume the  
DVD/CD from the point where the  
disc stopped, press the  
4
Stopping Play  
Press the (Stop) button  
during play.  
(Play/Pause) button.  
-
Press the (Stop) button twice to  
completely stop playback. The next  
time you press the  
(Play/Pause),  
the disc will start over from the  
beginning.  
ENG-31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD OPERATIONS  
-
-
Screen stops, no sound.  
To resume, press the  
(Play/Pause) button once again.  
5
Pausing Play  
Press the  
(Play/Pause)  
Note  
button on your remote control  
or on the front panel during  
play.  
If the player is left for about 5 minutes in  
pause mode, it will stop.  
-
-
-
-
Each time the button is pressed, a  
new frame will appear.  
No sound is heard during STEP  
mode.  
6
Step Motion Play (Except CD)  
Press the F.ADV button on the  
remote control during play.  
Press the  
(Play/Pause) button to  
resume normal play.  
You can only perform step motion  
play in the forward direction.  
-
-
No sound is heard during slow mode.  
Press the  
(Play/Pause) button to  
7
resume normal play.  
Reverse slow motion play will not  
work.  
Slow Motion Play (Except CD)  
-
Press the  
(Forward) button to  
choose the play speed between  
1/8, 1/4 and 1/2 of normal during  
PAUSE or STEP mode.  
Note  
This (  
press.  
) icon indicates an invalid button  
8
Removing Disc  
Press the OPEN/CLOSE (  
)
button on the front panel.  
ENG-32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD OPERATIONS  
Using the Search and Skip Functions  
During play, you can search quickly through a chapter or track, and use the skip function to jump to the next  
selection.  
Searching through a Chapter or Track  
If you want to search at a faster speed  
on the DVD or CD, press the button.  
During play, press the  
(Search) buttons on the remote  
control.  
/
DVD  
CD  
2X, 8X, 32X, 128X  
2X, 4X, 8X  
Notes  
-
The speed marked in this function may be  
different from the actual playback speed.  
-
No sound is heard during search mode  
(Except CD).  
Continuous Search Mode  
During play, press and hold the  
/
(Search) buttons on  
your remote control or on the front panel.  
The picture will search backward or forward at the 4X speed.  
If you release the  
/
(Search) buttons, the picture will  
go back to playback mode.  
Skipping Tracks  
During play, press the  
(Skip) buttons.  
/
-
When playing a DVD, if you press the  
it moves to the next chapter. If you press the  
button, it moves to the beginning of the chapter.  
(Skip) button,  
(Skip)  
One more press makes it move to the beginning of the  
previous chapter.  
ENG-33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD OPERATIONS  
Using the Display Function  
When Playing a DVD/CD  
You can select information in the  
DVD Function menu by pressing the  
MENU button.  
1
During play, press the INFO  
button on the remote control.  
DVD  
2
Press button to select Title,  
Chapter, Time, Audio, Subtitle  
in a sequence.  
ENG  
ENG  
MOVE  
CD  
CD  
You may use the number buttons of the  
remote control to directly access a title,  
chapter or time to start the playback  
from a desired time.  
3
Press the ¦ꢀ‹ buttons to  
make the desired setup and  
then press the OK button.  
ENG-34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD OPERATIONS  
4
To exit the menu, press the  
INFO button again.  
Notes  
To access the desired title when there is more than one in the disc.  
For example, if there is more than one movie on a DVD, each movie will be identified.  
Most DVD discs are recorded in chapters so that you can quickly find a specific passage (similar to  
tracks on an audio CD).  
Allows playback of the film from a desired time. You must enter the starting time as a reference.  
The time search function does not operate on some discs.  
Refers to the film's soundtrack language. In the example, the soundtrack is played in English 5.1CH.  
A DVD disc can have up to eight different soundtracks.  
Refers to the subtitle languages available in the disc.  
You will be able to choose the subtitle languages or, if you prefer, turn them off from the screen.  
A DVD disc can have up to 32 different subtitles.  
ENG-35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD OPERATIONS  
Using the Disc and Title Menu (DVD)  
MENU button can be used to access  
Disc and title menus on a DVD during  
playback.  
1
During playback of a DVD disc,  
press the MENU button on the  
remote control.  
2
Press the œꢀƒ buttons to  
select Function, then press  
the or ENTER button.  
3
Press the œꢀƒ buttons to  
select DVD Function, then  
press the or ENTER button.  
Notes  
-
Depending on the disc, the Disc Menu or  
Title Menu may not work.  
You can also use the Disc Menu by using  
the DISC MENU button on the remote  
control.  
Title Menu will only be displayed if there  
are at least two titles on the disc.  
The Title Menu works only with DVD.  
4
Press the œꢀƒ buttons to  
select Title Menu or Disc  
Menu then press the or  
ENTER button.  
-
-
-
ENG-36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD OPERATIONS  
Using the Function Menu (DVD)  
MENU button can be used to access  
DVD functions such as Information,  
Zoom, Bookmark, Repeat and EZ view  
menu during DVD playback.  
1
During the playback of a DVD  
disc, press the MENU button  
on the remote control.  
2
Press the œꢀƒ buttons to  
select Function, then press  
the or ENTER button.  
3
Press the œꢀƒ buttons to  
select DVD Function, then  
press the or ENTER button.  
- Information  
(See pages 34 to 35)  
- Zoom (See page 47)  
- Bookmark  
(See pages 45 to 46)  
- Repeat (See pages 38 to 39)  
- EZ View  
(See pages 41 to 42)  
You can also directly select these  
functions using their respective buttons  
on the remote control.  
4
Press the œꢀƒ buttons to  
select one of the five functions.  
Then press the or ENTER  
button to access the function.  
-
-
-
INFO  
MARK  
REPEAT  
ENG-37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD OPERATIONS  
Repeat Play  
Repeat the current track, chapter, title, a chosen section (A-B), or all of the disc.  
When playing a DVD/CD  
1
During play, press the REPEAT  
button on the remote control.  
Repeat screen appears.  
DVD repeats play by chapter or title,  
and CD repeats play by track or disc.  
DVD  
2
-
Chapter: repeats the chapter that is  
playing.  
Chapter Title A - B  
Off  
Press the ¦ꢀ‹ buttons to  
select Chapter, Title or A-B,  
then press the ENTER  
button.  
-
-
Title: repeats the title that is playing.  
Track: repeats the track that is  
playing.  
CD  
Track Disc A - B  
Off  
-
-
Disc: repeats the disc that is playing.  
A-B: repeats a segment of the disc  
that you select.  
DVD  
3
Chapter Title A - B  
To return to normal play,  
press the REPEAT button  
again, then press the ¦ꢀ‹  
buttons to select Off and  
press ENTER button.  
Off  
CD  
Track Disc A - B  
Off  
Press the CLEAR button in  
order to stop repeat play.  
Note  
- Depending on a disc, the Repeat function  
may not work.  
ENG-38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD OPERATIONS  
Using the A-B Repeat function  
1
During play, press the REPEAT  
button on the remote control.  
Repeat screen appears.  
DVD  
2
Chapter Title A - B  
Off  
Press the ¦ꢀ‹ buttons to  
select A-.  
CD  
Track Disc A - B  
Off  
DVD  
3
Chapter Title A - B  
Off  
Mark the Starting Point  
Press the ENTER button at  
the beginning of the segment  
you want to repeat (Point A).  
Once you select point A, B  
will be selected.  
CD  
Track Disc A - B  
Off  
Note  
The minimum A -B Repeat time is 5  
seconds.  
DVD  
4
Chapter Title A - B  
Off  
Mark the Ending Point  
Press the ENTER button  
again at the end of the  
segment you want to repeat  
(Point B).  
CD  
Track Disc A - B  
Off  
The segment will begin  
repeating in a continuous  
loop.  
DVD  
5
Chapter Title A - B  
Cancel A-B Repeat  
Press the REPEAT button,  
then press the ¦ꢀ‹ buttons  
to select Off and press  
ENTER button.  
Off  
CD  
Track Disc A - B  
Off  
ENG-39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD OPERATIONS  
Slow Repeat Play  
This feature allows you to slowly to repeat scenes containing sports, dancing, musical instruments being  
played etc., so you can study them more closely.  
When playing a DVD  
1
During play, press the  
(Play/Pause) button.  
Continuous Slow Mode  
2
-
In still mode, press and hold the  
button for 1 second. The picture will  
forward search at the 1/2X speed.  
Press the  
(Forward) button  
to choose the play speed  
between 1/8, 1/4 and 1/2 of  
normal during PAUSE or STEP  
mode.  
If you release the  
(Search) button,  
the picture will go back to still mode.  
Note  
- You cannot search backward in continuous  
slow mode.  
3
Chapter Title A - B  
Off  
Press the REPEAT button on  
the remote control.  
Press the ¦ꢀ‹ buttons to  
select A-.  
4
Chapter Title A - B  
Off  
Press the ENTER button at  
the point where you want  
repeat play to start (A).  
B is automatically selected.  
Press the ENTER button at  
the point where you want  
the repeat play to stop (B).  
To set A-B repeat, set (A) first,  
then set (B) after the following slow play  
time has elapsed:  
1/8x: wait 40 seconds, then press B  
1/4x: wait 20 seconds, then press B  
1/2x: wait 10 seconds, then press B  
The disc will play from A to B repeatedly  
at the speed you chose.  
5
Chapter Title A - B  
Off  
To return to normal play,  
press the REPEAT button,  
then press the ¦ꢀ‹ buttons  
to select Off and press  
ENTER button.  
ENG-40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD OPERATIONS  
Adjusting the Aspect Ratio (EZ View)  
Set the aspect ratio (length x width) of your TV screen so the DVD-VCR will display movies at the appropriate  
size for your television.  
To Playback using Aspect Ratio (DVD)  
The EZ View feature is not available  
when the A-B Repeat function is  
activated.  
Press the EZ VIEW button on  
the front panel or remocon.  
- The screen size changes  
when the button is pressed  
repeatedly.  
- The screen zoom mode  
operates differently  
depending on the screen  
setting in the Display Setup  
menu.  
- To ensure correct operation  
of the EZ VIEW button, you  
should set the correct  
aspect ratio in the Display  
Setup menu.  
(See pages 59 to 60).  
If you are using a 16:9 TV  
For 4:3 aspect ratio discs  
For 16:9 aspect ratio discs  
- NORMAL WIDE  
Displays the content of the DVD title in 16:9  
aspect ratio. The picture will look horizontally  
- WIDE SCREEN  
Displays the content of the DVD title in 16:9  
aspect ratio.  
stretched.  
- SCREEN FIT  
- SCREEN FIT  
The top and bottom portions of the screen are  
The top and bottom portions of the screen are  
cut off. When playing a 2.35:1 aspect ratio disc,  
cut off and the full screen appears. The picture  
the black bars at the top and bottom of the  
will look vertically stretched.  
screen will disappear. The picture will look  
- ZOOM FIT  
The top, bottom, left and right portions of the  
screen are cut off and the central portion of the  
screen is enlarged.  
vertically stretched. (Depending on a type of disc,  
the black bars may not disappear completely.)  
- ZOOM FIT  
The top, bottom, left and right of the screen are  
cut off and the central portion of the screen is  
enlarged.  
- VERTICAL FIT  
When a 4:3 DVD is viewed on a 16:9 TV, black  
bars will appear at the left and right of the screen  
in order to prevent the picture from looking  
horizontally stretched.  
ENG-41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD OPERATIONS  
If you are using a 4:3 TV  
For 4:3 aspect ratio discs  
- NORMAL SCREEN  
Displays the content of the DVD title in 4:3  
aspect ratio.  
For 16:9 aspect ratio discs  
- 4:3 Letter Box  
Displays the content of the DVD title in 16:9  
aspect ratio. The black bars will appear at the top  
and bottom of the screen.  
- SCREEN FIT  
The top and bottom portions of the screen are  
cut off and the full screen appears. The picture  
will look vertically stretched.  
- 4:3 Pan Scan  
The left and right portions of the screen are cut  
off and the central portion of the 16:9 screen is  
displayed.  
- ZOOM FIT  
The top, bottom, left and right portions of the  
screen are cut off and the central portion of the  
screen is enlarged.  
- SCREEN FIT  
The top and bottom portions of the screen are  
cut off and a full screen appears. The picture will  
look vertically stretched.  
- ZOOM FIT  
The top, bottom, left and right of the screen are  
cut off and the central portion of the screen is  
enlarged.  
Note  
This function may behave differently depending on the type of disc.  
ENG-42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD OPERATIONS  
Selecting the Audio Language  
You can select a desired audio language quickly and easily with the AUDIO button.  
Using the AUDIO button (DVD/CD)  
Notes  
-
To change the desired audio in the Disc  
Menu, press the DISC MENU button.  
This function depends on what audio  
languages are encoded on the disc and  
may not work on all DVDs.  
A DVD disc can contain up to 8 audio  
languages.  
To have the same audio language come  
up whenever you play a DVD, see pages  
56 to 57.  
1
During play, press the  
AUDIO button.  
-
Audio languages change  
when the button is pressed  
repeatedly.  
-
-
The audio languages are  
represented by  
abbreviations.  
DVD  
CD  
DOLBY DIGITAL 5.1CH  
ENG  
When playing a CD, you can  
select among Stereo, Right  
or Left.  
Stereo  
2
To remove the AUDIO icon,  
press the AUDIO, CLEAR  
or RETURN button.  
ENG-43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD OPERATIONS  
Selecting the Subtitle Language  
You can select a desired subtitle quickly and easily with the SUBTITLE button.  
Using the SUBTITLE button (DVD)  
Notes  
-
To change the desired subtitle in the Disc  
Menu, press the DISC MENU button.  
1
During play, press the  
SUBTITLE button.  
-
This function depends on what subtitles  
are encoded on the disc and may not  
work on all DVDs.  
A DVD disc can contain up to 32 subtitle  
languages.  
To have the same subtitle language come  
up whenever you play a DVD,  
see pages 56 to 57.  
The subtitle changes when  
the ¦ꢀ‹ button is pressed  
repeatedly.  
-
-
The subtitle languages are  
represented by abbreviations.  
ENG  
On  
2
To remove the SUBTITLE  
icon, press the SUBTITLE,  
CLEAR or RETURN button.  
ENG-44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD OPERATIONS  
Changing the Camera Angle  
When a DVD contains multiple angles of a particular scene, you can use the ANGLE function.  
Using the ANGLE button (DVD)  
If the disc contains multiple angles, the ANGLE appears on the screen.  
1
Press the ANGLE button,  
then the ANGLE icon will  
appear with the current angle  
number and the number of  
angles available.  
Note  
If the disc has only one angle, this feature  
won’t work. Currently, very few discs have  
this feature.  
2
Press the ¦ꢀ‹ button  
repeatedly to select the  
desired angle. To remove the  
ANGLE icon, press the  
CLEAR or RETURN button.  
Using the Bookmark Function  
This feature lets you bookmark sections of a DVD so you can quickly find them at a later time.  
Using the MARK button (DVD)  
1
During play, press the MARK  
button on the remote control.  
Note  
Depending on a disc, the Bookmark function  
may not work.  
2
When you reach the scene  
you want to mark, press the  
ENTER button. Up to three  
scenes may be marked at a  
time.  
ENG-45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD OPERATIONS  
Recalling a Marked Scene  
1
During play, press the MARK  
button on the remote control.  
2
Press the ¦ꢀ‹ buttons to  
select a marked scene.  
3
Press the  
(Play/Pause)  
button to play the marked  
scene.  
Clearing a Bookmark  
1
During play, press the MARK  
button on the remote control.  
2
Press the ¦ꢀ‹ buttons to  
select the bookmark  
number you want to delete.  
3
Press the CLEAR button to  
delete a bookmark number.  
ENG-46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD OPERATIONS  
Using the Zoom Function (DVD)  
1
During the playback of a DVD  
disc, press the MENU button  
on the remote control.  
2
Press the œꢀƒ buttons to  
select Function, then press  
the or ENTER button.  
3
Press the œꢀƒ buttons to  
select DVD Function, then  
press the or ENTER button.  
4
Press the œꢀƒ buttons to  
select Zoom, then press the  
or ENTER button.  
During DVD play, press ENTER to  
zoom in 2X/4X/2X/Normal in order.  
5
Press the œꢀƒ or ¦ꢀ‹  
buttons to select the part of  
the screen you want to  
zoom in on.  
You can also select Zoom function  
directly using ZOOM button on the  
remote control.  
Note  
Press the ENTER button.  
Depending on a disc, the Zoom function may  
not work.  
ENG-47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD OPERATIONS  
How to insert a Memory Card  
This unit accepts 12 different types of Memory Cards  
Insert the Memory Card correctly with the label facing up, otherwise it may not work.  
This device supports 12 types of memory cards :MMC, RS-MMC, SD, Smart Media Card, Memory Stick,  
Memory Stick-Pro, Memory Stick-Pro Duo, Memory Stick Duo, Mini SD Card ,XD-Picture Card. through the  
upper slot and Compact Flash, Micro Drive through the lower slot.  
If cards are inserted in both slots, the Compact Flash or Micro Drive in the lower slot has priority.  
We recommend you only insert one Memory Card at a time in the unit.  
Notes  
-
-
Memory Cards over 4GB use FAT 32, which may not be compatible with this unit.  
If it is not fully inserted, the “Memory Card” will not work. Some memory cards may not be performed  
correctly.  
-
-
-
If you remove the “Memory Card” during Memory Card operation, the recorded data may become corrupted.  
It is better to remove it after pressing DVD/M.CARD button to return to DVD/CD Mode.  
Memory Stick Duo, Memory Stick-Pro Duo, Mini SD, and RS-MMC must be inserted into a slot using adapter.  
But some Memory cards may not be performed correctly depending on the adapter condition.  
Some memory cards may not be compatible.  
When playing a Memory Card  
1
Insert a Memory Card.  
2
Press the DVD/M.CARD button  
on the remote control.  
3
Depending on the file type stored on the Memory card,  
audio files will be played the same way as MP3/WMA files  
and picture files will be played the same way as Picture CD  
files.(See pages 48 to 53)  
ENG-48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD OPERATIONS  
Clips Menu for MP3/WMA/JPEG  
Discs with MP3/WMA/JPEG contain individual songs and/or pictures that can be organized into folders as  
shown below. They are similar to how you use your computer to put files into different folders.  
1
Open the disc tray.  
2
Place the disc on the tray.  
3
Parent Folder,  
Current Folder and in Current Folder  
Peer Folders  
Folders and Files  
Close the tray.  
The tray closes and this  
screen displays.  
-
-
-
-
-
-
: MP3 file icon.  
: WMA file icon.  
: JPEG file icon.  
: Folder icon.  
-
: Name of currently playing file.  
: Current Playback Time.  
-
-
: Current Playback Mode : There are four  
modes. They can be selected in order by  
pressing the REPEAT button.  
- Off: Normal Playback  
- Track: Repeats the current track.  
- Folder: Repeats the current folder.  
- Random: Files in the disc will be played  
in random order.  
: Current Folder icon.  
: Disc mode (  
: Memory Card Mode)  
Folder Selection  
The folder can only be selected in the Stop mode.  
-
-
-
To select the Parent Folder  
Root  
Press the RETURN button to go to the parent  
folder, or press the œꢀƒ buttons to select “..” and  
press the ENTER button to go to the parent folder.  
WMA  
JPEG  
MP3  
Parent Folder  
To select the Peer Folder  
Press the ¦ꢀ‹ buttons to highlight the left window.  
Press the œꢀƒ buttons to select the desired folder,  
then the ENTER button.  
MUSIC  
Current Folder  
1st  
Sub-Folders  
2nd  
To select the Sub-Folder  
Press the ¦ꢀ‹ buttons to highlight the right  
window. Press the œꢀƒ buttons to select the  
desired folder, then press the ENTER button.  
SONG FILE  
SONG FILE  
1
2
Peer Folders  
SONG FILE  
3
ENG-49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD OPERATIONS  
MP3/WMA Playback  
1
Open the disc tray.  
2
Place the disc on the tray.  
3
Close the tray.  
When a disc or a folder contains both  
MP3 and WMA files, only one type will  
be played, not both.  
4
Press the œꢀƒ or ¦ꢀ‹  
buttons to select a song file.  
Press the ENTER button to  
begin playback of the song  
file.  
Notes  
-
A DVD/CD cannot be played in the Memory Card mode. If you push the DVD/M.CARD or OPEN button in  
M.CARD mode, the system will automatically enter the DVD/CD mode.  
-
-
-
-
Depending on the recording method, some MP3 CD-Rs may not be played.  
When pushing the DVD/M.CARD button to play disc again, the player doesn’t remember where you stopped.  
It is impossible to write MP3 or JPEG files to a Memory Card in this unit as it is read only.  
Only MP3/WMA Format files with the “ .mp3 and .wma” extensions can be played.  
Repeat/Random playback  
During play, press the  
REPEAT button to change  
the playback mode. There  
are four modes.  
Off, Track, Folder and  
Random.  
- Off: Normal Playback  
- Track: Repeats the current song file.  
- Folder: Repeats the song files which have the  
same extension in the current folder.  
- Random: Song files which have the same  
extension will be played in random order.  
To resume normal play, press the CLEAR button.  
ENG-50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD OPERATIONS  
CD-R MP3/WMA file  
When you record MP3 or WMA files on CD-R/Memory Card, please refer to the following.  
- Use a decompression transfer rate of at least  
64Kbps when recording WMA files.  
- Your MP3 or WMA files should be ISO 9660  
or JOLIET format.  
Sound quality with WMA files basically depends  
on the rate of compression/decompression you  
choose.  
ISO 9660 format and Joliet MP3 or WMA files  
are compatible with Microsoft's DOS and  
Windows, and with Apple's Mac. This format is  
the most widely used. Memory Cards over 4GB  
use FAT32, which may not be compatible with  
this unit.  
Getting CD audio sound requires an  
analog/digital sampling rate, that is conversion  
to WMA format, of at least 64Kbps and up to  
192Kbps.  
- When naming your MP3 or WMA files, do not  
exceed 8 characters, and enter “.mp3, .wma”  
as the file extension.  
Conversely, files with decompression rates  
below 64Kbps or over 192Kbps will not be  
played properly.  
General name format : Title.mp3. or Title.wma.  
When composing your title, make sure that you  
use 8 characters or less, have no spaces in the  
name, and avoid the use of special characters  
including: (.,/,\,=,+).  
- Do not try recording copyright protected  
MP3 files.  
Certain "secured" files are encrypted and code  
protected to prevent illegal copying. These files  
are of the following types: Windows MediaTM  
(registered trade mark of Microsoft Inc) and  
SDMITM (registered trade mark of The SDMI  
Foundation). You cannot copy such files.  
- Use a decompression transfer rate of at least  
128 Kbps when recording MP3 files.  
Sound quality with MP3 files basically depends  
on the rate of compression/decompression you  
choose. Getting CD audio sound requires an  
analog/digital sampling rate, that is conversion  
to MP3 format, of at least 128 Kbps and up to  
160 Kbps. However, choosing higher rates, like  
192  
- Important:  
The above recommendations cannot be taken  
as a guarantee that the DVD-VCR will play MP3  
recordings, or as an assurance of sound quality.  
You should note that certain technologies and  
methods for MP3 file recording on CD-Rs  
prevent optimal playback of these files on your  
DVD-VCR (degraded sound quality and in some  
cases, inability of the player to read the files).  
Kbps or more, only rarely give better sound  
quality. Conversely, files with decompression  
rates below 128 Kbps will not be played  
properly.  
- This unit can play a maximum of 3000 files and  
300 folders per disc.  
ENG-51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD OPERATIONS  
Program Play & Random Play  
You can listen to songs randomly or in the desired sequence.  
Up to 20 tracks can be programmed.  
This function is available only with Audio CDs.  
Program Play  
Notes  
Random Play  
• With the unit in stop mode, press the  
REPEAT button.  
1
With the unit in stop mode,  
press the REPEAT button.  
- The play mode menu will  
appear.  
- The play mode menu will appear.  
• Press the ¦ or buttons to select  
2
Random, then press the ENTER button.  
Press the ¦ or buttons to  
select PROGRAM, then  
press the ENTER button.  
- The program play screen  
will appear.  
-The disc will be played in random order.  
3
Press the œꢀƒ or ¦ꢀ‹  
buttons to select the desired  
track, then press the ENTER  
button.  
- The selected track will be  
added to the Program order.  
- If you delete the track,  
press the CLEAR button.  
The track added last will be  
deleted from the Program  
order.  
Note  
If the disc tray is opened during  
programming, program play will be canceled.  
To Cancel Programming  
4
- Press the REPEAT button.  
The program will not be saved and the  
program screen will disappear.  
To finish programming and  
start playback, press the  
button.  
To Cancel Program Play  
- During playback or in Stop mode, press  
The disc will be played in  
programmed order.  
the CLEAR button.  
ENG-52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD OPERATIONS  
Picture CD Playback  
1
Select the desired folder  
then press the ENTER  
button.  
2
Press the œꢀƒ buttons to  
select a Picture file in the  
clips menu, then press the  
ENTER button.  
Notes  
-
If no buttons on the remote control are  
pressed for 10 seconds, the menu will  
disappear.  
Press the (Stop) button to return to the  
clips menu.  
When playing a Kodak Picture CD, the  
unit displays the Photo directly, not the  
clips menu.  
3
Press the INFO. button to  
display the menu.  
-
-
Press the ¦ꢀ‹ buttons to  
select the menu you want to  
view, then press the ENTER  
button.  
Album Screen  
Slide Show  
-
-
: Returns to the Album Screen.  
TIMER:  
To see the next six picture, press the  
button.  
To see the previous six picture, press the  
button.  
(skip)  
(skip)  
-
-
-
: The unit enters slide show mode.  
Rotation  
Before beginning the Slide Show, the picture  
interval must be set.  
:Each time the ENTER button is pressed,  
the picture rotates 90 degrees clockwise.  
-
: When this icon is selected and ENTER is  
pressed, the pictures change automatically  
with about a 6 second interval.  
Zoom  
: Press the œꢀƒ or ¦ꢀ‹ buttons to select the  
part of the screen you want to zoom in on.  
Press the ENTER button. Each time the  
ENTER button is pressed, the picture is  
enlarged up to 4X. (2X 4X 2X Normal)  
-
-
: The pictures change automatically with  
about a 12 second interval.  
: The pictures change automatically with  
about a 18 second interval.  
Notes  
You can also select Zoom function directly  
- Depending on a file size, the amount of time  
between each picture may be different from the  
set interval time.  
using ZOOM button on the remote control.  
- If you don’t press any button, the slide show will  
start automatically in about 10 seconds by  
default.  
ENG-53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD OPERATIONS  
CD-R JPEG Discs  
When playing a CD-R/Memory Card/Picture CD  
- Only files with the “.jpg” and “.JPG” extensions can be played.  
- If the disc is not closed, it will take longer to start playing and not all of the recorded files may be played.  
- Only CD-R discs with JPEG files in ISO 9660 or Joliet format can be played.  
- Memory Cards over 4GB use FAT32, which may not be compatible with this unit.  
- Some memory cards may not perform correctly.  
- The name of the JPEG file may not be longer than 8 characters and should contain no blank spaces or  
special characters (. / = +).  
- Only a consecutively written multi-session disc can be played. If there is a blank segment in the multi-  
session disc, the disc can be played only up to the blank segment.  
- A maximum of 3000 images can be stored on a single CD.  
- Kodak Picture CDs are recommended.  
- When playing a Kodak Picture CD, only the JPEG files in the pictures folder can be played.  
- Kodak Picture CD: The JPEG files in the pictures folder can be played automatically.  
- Konica Picture CD: If you want to see the Picture, select the JPEG files in the clips menu.  
- Fuji Picture CD: If you want to see the Picture, select the JPEG files in the clips menu.  
- QSS Picture CD: The unit may not play QSS Picture CD.  
- If the number of files in 1 Disc is over 3000, only the first 3000 JPEG files can be played.  
- If the number of folders in 1 Disc is over 300, only JPEG files in the first 300 folders can be played.  
ENG-54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD OPERATIONS  
Using the Setup Menu  
The Setup menu lets you customize your DVD-VCR by allowing you to select various language preferences,  
set up a parental level, even adjust the player to the type of television screen you have.  
1
With the unit in Stop mode,  
press the MENU button on the  
remote control.  
2
Press the œꢀƒ buttons to  
select DVD, then press the  
or ENTER button.  
ŒLanguage: Setup of the Language.  
´Audio: Setup of the Audio Options.  
ˇDisplay: Setup of the Display Options. Used to select which type of screen you want to watch and several  
display options.  
¨Parental: Setup of the Parental Level. Allows users to set the level necessary to prevent children from  
viewing unsuitable movies such as those with violence, adult subject matter, etc.  
3
Press the œꢀƒ buttons to  
access the different  
features. Press the or  
ENTER button to access the  
sub features.  
4
To make the DVD setup screen  
disappear after setting up,  
press the MENU button again.  
Note  
Depending on the disc, some DVD Setup  
menu selections may not work.  
ENG-55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD OPERATIONS  
Setting Up the Language Features  
If you set the player menu on the OSD disc menu, audio and subtitle language in advance, they will come up  
automatically every time you watch a movie.  
1
With the unit in Stop mode,  
press the MENU button on the  
remote control.  
2
Press the œꢀƒ buttons to  
select DVD, then press the  
or ENTER button.  
3
Press the œꢀƒ buttons to  
select Language, then press  
the or ENTER button.  
4
Press the œꢀƒ buttons to  
select the desired item, then  
press the or ENTER  
button.  
-
-
The language is selected and the  
screen returns to Language Setup  
menu.  
5
Press the œꢀƒ buttons to  
select the desired language,  
then press the or ENTER  
button.  
To make the DVD Setup menu  
disappear, press the MENU button.  
ENG-56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD OPERATIONS  
Language Function  
-
-
Select “Others” if the language you  
want is not listed.  
Disc Menu  
To set the Disc Menu  
If the selected language is not  
recorded on the disc, the original pre-  
recorded language is selected.  
Language to your preferred  
language, follow these steps.  
If your preferred language is  
available on a DVD, your  
Disc Menu Language will  
automatically be set to the  
language you choose.  
-
Select “Original” if you want the  
default soundtrack language to be  
the original language the disc is  
recorded in.  
Audio  
To set the Audio Language to  
your preferred language,  
follow these steps. If your  
preferred language is  
available on a DVD, your  
Audio Language will  
-
-
Select “Others” if the language you  
want is not listed.  
If the selected language is not  
recorded on the disc, the original pre-  
recorded language is selected.  
automatically be set to the  
language you choose.  
-
-
Select “Automatic” if you want the  
subtitle language to be the same as  
the language selected as the audio  
language.  
Subtitle  
Subtitle Language  
Automatic  
To set the Subtitle Language  
to your preferred language,  
follow these steps. If your  
preferred language is  
available on a DVD, your  
Subtitle Language will  
Subtitle  
Select “Others” if the language you  
want is not listed. Some discs may  
not contain the language you select  
as your initial language; in that case  
the disc will use its original  
automatically be set to the  
language you choose.  
language setting.  
ENG-57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD OPERATIONS  
Setting Up the Audio Options  
Audio Options allows you to set up sound for use with your external audio system.  
1
With the DVD in Stop mode,  
press the MENU button on the  
remote control.  
2
Press the œꢀƒ buttons to  
select DVD, then press the  
or ENTER button.  
3
Press the œꢀƒ buttons to  
select Audio, then press the  
or ENTER button.  
-
To make the DVD Setup menu  
disappear, press the MENU button.  
4
Press the œꢀƒ buttons to  
select the desired item, then  
press the or ENTER  
button.  
PCM Down Sampling  
:
On  
ENG-58  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD OPERATIONS  
Audio Options  
Note  
Digital Output  
There is no analog audio output when you  
play a DTS disc.  
- PCM: Converts to  
PCM(2CH) audio.  
PCM Down Sampling  
: On  
Manufactured under license from Dolby  
Laboratories. “Dolby” and the double-D  
symbol are trademarks of Dolby  
Laboratories.  
“DTS” and “DTS Digital Out” are trademarks  
of Digital Theater Systems, Inc.  
- Bitstream: Outputs Dolby  
Digital via the digital  
output. Select Bitstream  
when connecting to a  
Dolby Digital Decoder.  
Note  
DTS  
There is no analog audio output when you  
play a DTS sound disc.  
Select On when connecting  
to a DTS Decoder.  
PCM Down Sampling  
: On  
- Off: Doesn’t output digital  
signal.  
- On: Outputs DTS Bitstream  
via digital output.  
-
Dynamic compression restrains the  
dynamic range of the sound, i.e. the  
difference between the loud and  
quiet passages of a DVD audio track.  
This is useful when watching a DVD  
late at night.  
Dynamic Compression  
- On: When the movie-  
soundtracks are played at  
low volume or from smaller  
speakers, the system can  
apply appropriate compression  
to make low-level content more  
intelligible and prevent dramatic  
passages from getting too loud.  
- Off: To select the standard  
range.  
Note  
PCM Down Sampling  
Even when PCM Down sampling is Off,  
some discs will only output down sampled  
audio through the digital outputs.  
- On: Select this when the  
Amplifier connected to the  
player is not 96KHz  
PCM Down Sampling  
:
On  
compatible. In this case, the  
96KHz signals will be down  
converted to 48KHZ.  
- Off: Select this when the  
Amplifier connected to the  
player is 96KHz compatible.  
In this case, all signals will  
be output without any  
changes.  
ENG-59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD OPERATIONS  
Setting Up the Display Options  
Display options enable you to set various video functions of the player.  
1
With the unit in Stop mode,  
press the MENU button on the  
remote control.  
2
Press the œꢀƒ buttons to  
select DVD, then press the  
or ENTER button.  
3
Press the œꢀƒ buttons to  
select Display, then press  
the or ENTER button.  
-
To make the DVD Setup menu  
disappear, press the MENU button.  
4
Press the œꢀƒ buttons to  
select the desired item, then  
press the or ENTER  
button.  
ENG-60  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD OPERATIONS  
Display Options  
TV Aspect  
Depending on the type of  
television you have, you may  
want to adjust the screen  
setting (aspect ratio).  
- 4:3 Letter Box: Select when you want to see the total 16:9  
ratio screen the DVD supplies, even though you have a TV  
with a 4:3 ratio screen. Black bars will appear at the top  
and bottom of the screen.  
- 4:3 Pan Scan: Select this for conventional size TVs when  
you want to see the central portion of the 16:9 screen.  
(Extreme left and right side of movie picture will be cut off.)  
- 16:9 Wide: You can view the full 16:9 picture on your wide  
screen TV.  
Black Level  
Note  
It cannot be adjusted when Alt Video Out is  
set to Progressive.  
The Black Level feature  
On  
adjusts black reference level  
in the video signal to one of  
two choices:  
- On: This will enhance the  
Black Level for increased  
brightness/contrast when  
viewing DVDs.  
- Off: This is the Standard NTSC reference Black  
Level for consistent brightness/contrast across all sources.  
Alt Video Out  
-
-
See your TV owner’s manual to  
determine what type of TV you have.  
Interlace: Interlaced Scan mode will  
work.  
The “Alt Video Out” option  
must be set in the on-screen  
menu if you have connected  
your DVD-VCR to a TV using  
the S-VIDEO OUT or  
- Progressive: Progressive Scan mode  
will work, and Video and S-Video will  
not work.  
- Press the P-SCAN button on the  
front panel or PROGRESSIVE button  
on the remote control in stop mode.  
Be sure to set the correct Video  
output for the proper picture.  
COMPONENT VIDEO OUT  
jacks.  
- S-Video: Select when you want to use S-Video  
output.  
- Component: Select when you want to use  
Component interlace(525i) Out or  
Progressive(525p) Out.  
ENG-61  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD OPERATIONS  
Setting Up the Parental Control  
The Parental Control function works in conjunction with DVDs that have been assigned a rating, which helps  
you control the types of DVDs that your family watches. There are up to 8 rating levels on a disc.  
1
With the DVD in Stop mode,  
press the MENU button on the  
remote control.  
2
Press the œꢀƒ buttons to  
select DVD, then press the  
or ENTER button.  
3
Press the œꢀƒ buttons to  
select Parental, then press  
the or ENTER button.  
4
Press the or ENTER  
button to set up password if  
you want to use a password.  
The Enter Password screen  
appears.  
0~9  
-
To make the DVD Setup menu  
disappear, press the MENU button.  
5
Note  
Enter your password.  
The Re-enter Password  
screen appears to confirm  
the password. Enter your  
password again.  
Re-enter new Password  
There is no default password.  
0~9  
The player is locked (  
).  
ENG-62  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD OPERATIONS  
Setting Up the Rating Level  
1
With the unit in stop mode,  
press the MENU button on the  
remote control.  
2
Press the œꢀƒ buttons to  
select DVD, then press the  
or ENTER button.  
3
Press the œꢀƒ buttons to  
select Parental, then press  
the or ENTER button.  
Enter your password.  
0~9  
4
Yes  
Press the œꢀƒ buttons to  
select Rating Level, then  
press the or ENTER  
button.  
-
-
To make the DVD setup menu  
disappear, press the MENU button.  
5
Press the œꢀƒ buttons to  
select the Rating Level you  
want, then press the or  
ENTER button.  
For example, if you select up to Level  
6, discs that contain Level 7, 8 will  
not play.  
e.g) Setting up in Level 6.  
ENG-63  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD OPERATIONS  
Changing the Password  
1
With the unit in stop mode,  
press the MENU button on the  
remote control.  
2
Press the œꢀƒ buttons to  
select DVD, then press the  
or ENTER button.  
3
Press the œꢀƒ buttons to  
select Parental, then press  
the or ENTER button.  
Enter your password.  
0~9  
4
Yes  
Press the œꢀƒ buttons to  
select Change Password,  
then press the or ENTER  
button.  
-
To make the DVD setup menu  
disappear, press the MENU button.  
5
Note  
Enter your new password.  
Re-enter the new password  
again.  
If you forgot your password, press power on  
from a cold start with no disc in the unit.  
Press the  
/
(Search) buttons  
simultaneously on the front panel for 5  
seconds. The “Reset OK” message will  
appear. Press the POWER button.  
0~9  
ENG-64  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 5  
VCR OPERATIONS  
In this chapter, you will learn how to play a video cassette tape, how to use the time counter and memory stop  
features, and how to record a program as you are watching TV.  
Inserting and Ejecting a Video Cassette  
Tape  
To Insert a Video Cassette Tape  
-
-
Don’t try to insert a tape upside down  
or backwards.  
1
Hold the video cassette tape  
window-side up with the arrow  
pointing away from you.  
Use only video tapes labeled “VHS.”  
European PAL VHS video tapes and  
S-VHS pre-recorded tapes aren’t  
compatible with this unit. Choose  
brand name, high quality tapes for  
best results.  
-
If the safety tab of your video tape  
has been removed, the tape begins  
to play automatically. You don’t have  
to press PLAY. For more information  
on the safety tab, see page 77.  
2
Gently push the tape through  
the compartment door until you  
feel the VCR pull it.  
The VCR loads the tape  
automatically.  
To Eject a Video Cassette Tape  
When you’re finished playing a pre-  
recorded video tape, it’s best to rewind it  
to the beginning and remove it from the  
VCR to protect it from wear and tear.  
1
Press the  
(Stop) button to  
stop playing the tape.  
After ejecting a tape, you should remove  
it completely from the compartment and  
turn off the VCR.  
2
Press the EJECT button on the  
front panel to eject the tape.  
ENG-65  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VCR OPERATIONS  
Playing a Pre-Recorded Video Cassette  
Tape  
Playing the Tape  
-
For more information on the safety  
tab, see page 77.  
1
Insert the video cassette tape.  
2
If the tape doesn’t begin to play  
automatically, press the  
(Play/Pause) button.  
-
-
-
The VCR does not play sound while  
a video tape is paused.  
3
Pausing Play  
See “Using Automatic Tracking” on  
the next page.  
While a tape is playing, press  
the  
when you want to interupt play.  
The tape pauses temporarily.  
(Play/Pause) button  
If you see white lines on the screen,  
see “Using Automatic Tracking” on  
page 68.  
Press the  
(Play/Pause)  
button to resume playing the  
tape.  
Note  
To view VCR playback, you must connect the Video Out (Yellow) or RF Out jack to your TV. The VCR does not  
output video throught the S-Video or Component jacks.  
ENG-66  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VCR OPERATIONS  
Special VCR Playback Features  
While a videotape is playing, you can enjoy a variety of special playback features, including Still, Frame  
Advance, Skip, Repeat, and more. Press the Play/Pause button again to resume normal playback.  
Frame Advance  
In the pause mode, press  
F.ADV to advance to the next  
frame.  
Fps/Rps Review  
In Play mode, press  
(Forward) or  
/
/
(Rewind) to review at two  
speeds:  
- Picture Search: Press and  
release  
or  
(SKIP)  
buttons to advance the tape  
forward or backward at 5  
times normal speed.  
- Jet Search: Press and hold  
down the  
/
(SEARCH)  
buttons, then release it to play  
back at the normal speed.  
SKIP  
In Play mode, press the SKIP  
button to move ahead exactly  
30 seconds. Press the SKIP  
button repeatedly up to 4 times  
to move ahead 2 minutes.  
Repeat  
- In Play mode, press the  
REPEAT button to review the  
last 5 seconds of tape (SP  
mode).  
- In Play mode, press the  
REPEAT button to review the  
last 15 seconds of tape (SLP  
mode).  
ENG-67  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VCR OPERATIONS  
Using Automatic Tracking  
The Tracking adjustment removes the white lines that sometimes appear during playback because of slight  
differences in recording decks. The TRK button will automatically align the recorded tracks with the playback  
heads to solve this problem. You may also set tracking manually.  
1
Insert and play a video  
cassette tape.  
As soon as the tape begins  
to play, the VCR begins  
Tracking  
automatic tracking.  
2
If automatic tracking doesn’t  
remove the streaks from the  
picture, press and hold the  
CHTRK ꢀ¤¤¤¤¤¤button until  
the streaks disappear.  
ENG-68  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VCR OPERATIONS  
Selecting the Cassette Type  
If you wish to use the tape counter to display the time remaining on a cassette, you must indicate the  
type of cassette inserted.  
1
Press the MENU button on the  
remote control.  
2
n
Press the œꢀƒ buttons to  
select VCR, then press the  
or ENTER button.  
Note  
This information is usually printed on the  
tape box. The menu cycles through: T-120,  
T-160 or T-180.  
Once the type of cassette is set, the VCR  
can display the amount of time remaining on  
the tape when you press the INFO. button.  
3
n
Press the œꢀƒ buttons to  
select Tape Length, then  
press the or ENTER  
button to select the correct  
cassette length.  
4
Press the MENU button to exit.  
ENG-69  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VCR OPERATIONS  
Setting the Auto Play  
If you want your videotapes to play automatically when you insert them, turn on Auto Play.  
Note  
Only tapes that are missing the Record  
Safety Tab will play automatically when  
inserted (See page 65).  
1
Press the MENU button on the  
remote control.  
2
n
Press the œꢀƒ buttons to  
select VCR, then press the  
or ENTER button.  
-
-
On: The VCR will automatically begin  
playing a video tape when it is  
inserted, as long as the safety  
tab of the cassette has been  
removed.  
3
n
Press the œꢀƒ buttons to  
select Auto Play, then press  
the or ENTER button to  
select On or Off.  
Off: Auto play is disabled.  
4
Press the MENU button to exit.  
ENG-70  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VCR OPERATIONS  
Setting the Auto Repeat  
If you want your videotapes to play repeatedly, turn on Auto Repeat.  
1
Press the MENU button on the  
remote control.  
2
n
Press the œꢀƒ buttons to  
select VCR, then press the  
or ENTER button.  
-
-
On: The VCR will play a tape  
repeatedly [unless a tape control  
is activated (stop, fast forward or  
rewind)].  
3
n
Press the œꢀƒ buttons to  
select Auto Repeat, then  
press the or ENTER  
button to select On or Off.  
Off: Auto Repeat is disabled.  
4
Press the MENU button to exit.  
ENG-71  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VCR OPERATIONS  
Using the Tape Counter  
The tape counter:  
-
-
-
-
Indicates the elapsed time in the play and record modes (hours, minutes and seconds).  
Is reset when a cassette is inserted in the DVD-VCR.  
Allows you to easily find the beginning of a sequence.  
If the remaining time is to be calculated correctly, you must indicate the type of cassette being used.  
1
Insert a cassette in your DVD-  
VCR. To set the tape counter  
to zero at the beginning of a  
sequence:  
- Press the INFO. button twice  
to display the counter  
- Press the CLEAR button  
when you want to set the  
tape counter to zero.  
2
When you are ready,  
- Start playback or recording.  
- Press the  
(Stop) button.  
- To fast-forward or rewind to  
the sequence at which the  
counter was set to zero, press  
the the  
/
Forward) or  
(Rewind) buttons on  
/
(
the remote control.  
- Some DVD-VCR information, such as the counter, can be  
displayed on the television screen.  
Press the INFO. button:  
- Once to display the current function, recording speed and  
counter.  
- Twice to display the counter only.  
- Three times to display the time remaining on the cassette.  
- Four times to clear the display.  
ENG-72  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VCR OPERATIONS  
Using the Assemble Edit Function  
This function allows you to start a new recording at a specific position on the cassette while maintaining a very  
smooth scene change.  
1
Insert the cassette to be edited  
in your DVD-VCR.  
2
Press the  
(Play/Pause)  
button to start playback.  
3
When you reach the position  
from which you wish to start  
the new recording, press the  
(Play/Pause) button.  
4
Press the F.ADV button as  
often as necessary to advance  
frame by frame, until the exact  
recording position is located.  
5
While the DVD-VCR is in  
pause mode, press the REC  
button. The pause mode is  
displayed on the screen.  
ENG-73  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VCR OPERATIONS  
6
Select the source from which  
you wish to record by pressing:  
- The CH  
or button for  
television channel.  
- The INPUT SEL. button for  
the LINE1 or LINE2 input  
source.  
7
Press the REC button to start  
recording. When you have  
finished recording, press the  
(Stop) button.  
Selecting the Audio Output Mode  
You can select the mode in which the sound is reproduced on the loudspeakers and AV outputs.  
The following options are available.  
Press the AUDIO button on the  
remote control until the  
required option is displayed.  
Audio output Mode  
-
-
-
-
Left : Used to listen to the sound on the left Hi-Fi channel.  
Right: Used to listen to the sound on the right Hi-Fi channel.  
Mono: Used to listen to the sound on the normal mono channel.  
Hi-Fi : Used to listen to Hi-Fi stereo sound on the left and  
right channels. When playing back tapes recorded in  
Hi-Fi, the sound switches to Hi-Fi after five seconds of  
Mono.  
ENG-74  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VCR OPERATIONS  
Searching for a Specific Sequence  
Each time you record a cassette on this DVD-VCR, an “index” is automatically marked on the tape when  
recording starts.  
The Search function allows you to fast-forward or rewind to a specific index and start playback from that point.  
Depending on the direction selected, the indexes are numbered as follows:  
Prev  
Seq.  
Seq. being  
played  
Next  
Seq.  
etc.  
etc.  
2
1
1
2
This DVD-VCR uses a standard indexing system (VISS). As a result, it will recognize any indexes marked by  
other VCRs using the same system and vice versa.  
1
Press the MENU button on the  
remote control.  
2
Press the œꢀƒ buttons to  
select Function, then press  
the or ENTER button.  
3
DVD Function  
Press the œꢀƒ buttons to  
select VCR Function, then  
press the or ENTER  
button.  
VCR Function  
VCR Function can be  
displayed simply by pressing  
the SEARCH button.  
4
Go to [0:00:000]  
End Search  
Press the œꢀƒ buttons to  
select the desired item, then  
press the or ENTER  
button.  
Forward Intro Scan  
Reverse Intro Scan  
ENG-75  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VCR OPERATIONS  
Variable Search System  
Go To [0:00:00] Stop  
Go to [0:00:000]  
Use this feature when you  
want to search for the 0:00:00  
counter position on a  
cassette.  
End Search  
Forward Intro Scan  
Reverse Intro Scan  
Press the CLEAR button at  
the point on the tape where  
you want to set the counter to [0:00:00].  
The VCR will rewind or fast forward, searching for the  
0:00:00 counter position, and then automatically stop at that  
position.  
End Search  
Go to [0:00:000]  
Use this feature when you  
End Search  
Forward Intro Scan  
want to search for a blank  
Reverse Intro Scan  
position to record a program  
on a cassette.  
The VCR will fast forward,  
searching for a blank position,  
and then automatically stop at that position.  
If the VCR reaches the end of the tape during end search,  
the tape will be ejected.  
Scan and play  
Use scan and play when you  
Go to [0:00:000]  
End Search  
don’t know exactly where a  
program is located on a  
Forward Intro Scan  
Reverse Intro Scan  
cassette tape.  
- Forward Intro Scan  
Select “Forward Intro Scan”,  
then press the ENTER button.  
- Reverse Intro Scan  
Select “Reverse Intro Scan”, then press the ENTER button.  
ENG-76  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VCR OPERATIONS  
Basic Recording  
You can record a TV show in progress by inserting a blank tape and pressing the REC button.  
You can even add time in 30-minute increments up to 4 hours by pressing the REC button repeatedly;  
see page 79.  
Note  
Be sure your videotape has a Record Safety Tab. If the tab is missing, you can cover the opening with a small  
piece of tape. Warning: Do not cover this opening unless you are sure you want to record over the tape.  
Before You Begin...  
-
Power on the DVD-VCR  
-
Power on the TV  
Protecting a Recorded Cassette  
Video cassettes have a safety tab to prevent accidental erasure. When this tab has been removed, you cannot  
record on the tape.  
If you wish to protect a  
cassette, break off the tab  
using a small screwdriver.  
To re-record over a protected  
cassette (safety tab broken),  
cover the hole with adhesive  
tape.  
Recording  
1
Insert a blank VHS tape into  
the VCR deck.  
Make sure the tape is long  
enough to record the entire  
program.  
Press the SPEED button to set  
the record speed.  
(See page 80)  
2
Use the Number buttons or the CH œ or ƒ buttons to select  
the desired channel, or press the INPUT SEL. button to  
select Line 1 or 2 if recording from an external device  
connected to the front or rear jacks, respectively.  
ENG-77  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VCR OPERATIONS  
Note  
Recording from the DVD to the VCR is not  
possible.  
3
Press the REC button on the  
remote control or front panel.  
For options while recording is in  
progress, see “Special Recording  
Features” on this page.  
4
Pause/Resume Recording  
Press the  
(Play/Pause)  
button.  
Press the REC button again to  
resume.  
5
Stop Recording  
Press the  
(Stop) button.  
Special Recording Features  
While a recording is in progress, you can watch a different channel or a DVD, or add recording time in 30-  
minute increments.  
To Watch a different Channel while Recording  
Make sure that you connect the DVD-VCR to the TV using  
an RF cable.  
- When you watching through the Antenna input during  
recording, press the TV/VCR button on the remote control.  
Using your TV remote control, change the channel you  
want to watch.  
- When you watching through Line input during recording,  
change the input of your TV from Line to Antenna. Using  
your TV remote control, change the channel you want to  
watch.  
ENG-78  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VCR OPERATIONS  
To Watch a DVD while Recording  
Insert a DVD in the DVD tray and press the  
(Play/Pause). The output will automatically change to the  
DVD.  
To Add Recording Time  
See One-Touch Recording (OTR) below.  
Using One-Touch Recording  
One-Touch Recording (OTR) allows you to add recording time in 30-minute increments up to 4 hours at the  
touch of a button.  
1
Insert a blank VHS tape into  
the VCR deck.  
2
Use the Number buttons or the CH œ or ƒ buttons to select  
the desired channel, or press the INPUT SEL. button to  
select Line 1 or 2 if recording from an external device  
connected to the front or rear jacks, respectively.  
3
Press the REC button on the  
remote control or front panel.  
ENG-79  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VCR OPERATIONS  
4
While in Record mode, press  
the REC button again to  
activate One-Touch Recording  
(OTR).  
Record length 0:30 appears  
on the On-screen display and  
the DVD-VCR will record for  
exactly 30 minutes.  
5
Record length 0:30  
07  
Add Recording Time  
Continue pressing REC  
button to add recording time  
in 30 minute increments up to  
4 hours.  
SP  
The DVD-VCR stops  
recording automatically when  
the time has elapsed. The  
DVD-VCR will automatically be  
turned off when the OTR  
finished.  
Selecting the Recording Speed  
You can slow down the recording speed from SP to SLP in order to fit six hours of programming on a T-120  
tape.  
Note  
Press the SPEED button on the  
remote control to select the  
Record Speed.  
The selected Record Speed will appear on  
the front panel display and on-screen  
display.  
- SP: Standard Play, for best  
quality.  
- SLP: Super Long Play, for  
maximum recording  
time (3 times SP).  
Maximum Recording Time - SP vs. SLP  
Tape Length  
T-120  
SP (Standard Play) SLP (Super Long Play)  
2 hrs  
2hrs 40 mins  
3 hrs  
6 hrs  
8 hrs  
9 hrs  
T-160  
T-180  
ENG-80  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VCR OPERATIONS  
Making a Timer Recording  
Insert a blank videotape into the VCR deck. Be sure to leave the Record Safety Tab intact.  
With the Timer Recording function, you can program up to 7 events at a time to record up to a month in  
advance.  
To Begin Setting the Timer Recording,  
- Power On your DVD-VCR.  
- Power On your TV.  
1
Press the MENU button on the  
remote control.  
2
Press the œꢀƒ buttons to  
select PROG, then press the  
or ENTER button.  
The Timer Program Screen  
can be displayed simply by  
pressing the TIMER button.  
3
Select Channel Number  
Press the button, then  
press the œꢀƒ buttons to  
set the channel.  
Press the button to move  
to the next setting.  
Note  
4
You can select external input directly  
(L1 or L2) using INPUT SEL. button.  
Set Time/Date/Speed  
Repeat Step 3 above to set  
start time, end time, date and  
record speed.  
Date can be set for one time,  
daily or weekly recording.  
ENG-81  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VCR OPERATIONS  
Selecting Auto Speed  
If the length of the videotape is not long enough for a timer  
recording in the SP mode, set the recording tape speed to  
“Auto”. Recording will start in the SP mode. If the length is not  
long enough, the tape speed will automatically change from SP  
mode to SLP mode.  
Daily/Weekly Date Programming  
Weekly [Sun~Sat]: Use this to record TV programs on the same  
channel at the same time every week. Daily [Mon, Tue, Wed,  
Thu, Fri]: Use this to record TV programs on the same channel  
at the same time every day Monday through Friday.  
5
Save Timer Recording  
Press the RETURN button to  
finish setting the timer  
recording.  
Stop the DVD-VCR or turn the  
power off. Then the DVD-VCR  
will automatically turn on and  
begin recording at the time you  
set.  
To stop the timer recording,  
press the POWER button or  
press the  
(Stop) button  
twice.  
ENG-82  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 6  
REFERENCE  
Using the TV Buttons on the Remote Control  
Your DVD-VCR remote control will work with Samsung televisions and compatible brands.  
To determine whether your television is compatible, follow the instructions below.  
1 Switch your television on.  
2 Point the remote control towards the television.  
3 Hold down the TV button and enter the two-figure code corresponding to the brand of your television, by  
pressing the appropriate numeric buttons.  
TV Codes  
BRAND  
SAMSUNG  
DAEWOO  
EMERSON  
HITACHI  
LG  
CODE  
01, 14, 15, 23  
19  
21  
10  
06, 08, 18  
28  
LOEWE  
MAGNAVOX  
NEWSAN  
NOBLEX  
PANASONIC  
RCA  
SANYO  
SHARP  
SONY  
04  
27  
25  
12, 24  
07, 29  
05, 20  
02, 16, 22  
03  
TELEFUNKEN  
TOSHIBA  
ZENITH  
26  
09  
17  
Note  
-
If your television is compatible with the remote control, it will switch off. It is now programmed to operate  
with the remote control.  
-
If several codes are indicated for your television brand, try each one in turn until you find one that works.  
You can then control the television using the following buttons.  
Button  
POWER  
INPUT SEL.  
VOL + or –  
Function  
Used to switch the television on and off.  
Used to select an external source.  
Used to adjust the volume of the television.  
Used to select the required channel.  
Used to toggle the sound on and off.  
CH (  
or  
)
TV MUTE  
The various functions will not necessarily work on all televisions. If you encounter problems, operate the  
television directly.  
ENG-83  
Download from Www.Somanuals.com. All Manuals Search And Download.  
REFERENCE  
Troubleshooting  
Before contacting a Samsung authorized service center, perform the following simple checks.  
If you are unable to solve the problem after reading the above instructions, note:  
-
-
-
The model and serial number on the rear of your DVD-VCR  
The warranty information  
A clear description of the problem  
Then contact your nearest SAMSUNG service center.  
Identifying DVD Problems  
Problem  
Action  
Page  
• Check the batteries in the remote control.  
They may need replacing.  
No operations can  
be performed with  
the remote control.  
• Operate the remote control at a distance of no more than 20 feet.  
• Remove batteries and hold down one or more buttons for several  
minutes to drain the microprocessor inside the remote control to  
reset it. Reinstall batteries and try to operate the remote control  
again.  
P5  
• Ensure that the disc is installed with the label side facing up.  
• Check the region number of the DVD.  
Disc does not play.  
P9  
• 5.1 channel sound is reproduced only when the following  
conditions are met.:  
1) The DVD-VCR is connected with the proper Amplifier  
2) The disc is recorded with 5.1 channel sound.  
• Check whether the disc being played has the “5.1 ch” mark on  
the outside.  
5.1 channel sound  
is not being  
reproduced.  
P20  
• Check if your audio system is connected and working properly.  
• In a DVD Setup Menu, is the Audio Output set to Bitstream?  
• The features or action cannot be completed at this time because:  
1. The DVD’s software restricts it.  
2. The DVD’s software doesn’t support the feature (e.g., angles).  
3. The feature is not available at the moment.  
4. You’ve requested a title or chapter number or search time that is  
out of range.  
The  
icon  
appears on  
screen.  
-
Disc Menu doesn’t  
appear.  
• Check if the disc has a Menu.  
-
-
• Some of the functions selected in the Setup Menu may not work  
properly if the disc is not encoded with the corresponding  
function.  
Play mode differs  
from the Setup  
Menu selection.  
The screen ratio  
• The Screen Ratio is fixed on your DVDs.  
P41-42  
P58~59  
cannot be changed.  
• Make sure you have selected the correct Digital Output in the  
Audio Options Menu.  
No audio.  
ENG-84  
Download from Www.Somanuals.com. All Manuals Search And Download.  
REFERENCE  
Problem  
Action  
Page  
• Press the  
/
button for more than 5 seconds with no disc in  
The screen is  
blocked  
-
the unit. All settings will revert to the factory settings.  
• From a cold start with no disc in unit, press the  
/
button  
Forgot password  
simultaneously on the front panel for 5 seconds. All settings  
including the password will revert to the factory settings. Don't  
use this unless absolutely necessary.  
P62-64  
• Go to the contents and find the section of the instruction book  
that contains the explanations regarding the current problem, and  
follow the procedure once again.  
If you experience  
other problems.  
• If the problem still cannot be solved, please contact your nearest  
authorized service center.  
The picture is  
noisy or distorted  
• Make sure that the disc is not dirty or scratched.  
Clean the disc.  
Identifying VCR Problems  
Problem  
Action  
Page  
• Check that the power plug is connected to a wall outlet.  
-
No power  
A video cassette can only be inserted with the window  
side up and the safety tab facing you.  
You cannot insert  
a video cassette  
P65  
-
Check the DVD-VCR antenna/cable connections.  
Is the DVD-VCR tuner properly set?  
Check if the safety tab is intact on the cassette.  
The television  
program was not  
recorded  
Re-check the recording start/stop time settings.  
If there was a power failure or interruption during timer  
recording, the recording will have been cancelled.  
Timer recording  
was unsuccessful  
P81-82  
No playback picture  
or the picture is  
distorted  
Check to see if you are using a prerecorded tape.  
P77  
-
Check the tuner or external setting. It should be on tuner.  
Check the TV or VCR antenna connections.  
You cannot see  
normal broadcasts  
Noise bars or  
Press the TRK buttons to minimize this effect.  
P68  
-
streaks on playback  
When the II button  
is pressed during  
playback, the still  
picture has severe  
“noise bars” streaks  
A still picture may have “noise bars”, depending on the  
condition of the tape. Press the TRK buttons during slow  
motion to minimize this effect.  
If poor pictures appear on a variety of cassettes, the video  
heads may need cleaning. This is not a common problem  
and unless it appears, the heads should not be cleaned.  
When cleaning the video heads, read all instructions  
provided with the head cleaning cassette. Incorrect head  
cleaning can permanently damage the video heads.  
Video Head  
Cleaning  
-
ENG-85  
Download from Www.Somanuals.com. All Manuals Search And Download.  
REFERENCE  
Technical Specifications  
AUDIO  
2 Stereo audio inputs, RCA Connector, -8dbm, 47K,  
front and rear  
Inputs  
VIDEO  
2 Composite video inputs, RCA Connector, 75, 1Vp-p  
Antenna or CATV Input, F-Connector, 75Ω  
1 Stereo audio outputs, RCA Connector, -8dbm, 1.5KΩ  
2 Digital audio outputs (1 coaxial and 1 optical)  
1 pair Stereo audio outputs  
RF  
AUDIO  
AUDIO (DVD only)  
VIDEO  
1 Composite video output, RCA Connector, 75, 1Vp-p  
1 S-Video output, S-Connector, 75, Y=1.0Vp-p,  
C=0.286Vp-p  
Outputs  
VIDEO (DVD only)  
1 Component video output, 75, Y=1.0Vp-p, Pb=0.7Vp-p,  
Pr=0.7Vp-p  
RF  
Channel 3 or 4  
VIDEO SYSTEM  
1/2-inch VHS system, 4 rotary head helical scanning;  
FM azimuth luminance;chrominance: converted sub system  
phase shift  
AUDIO TRACK  
PLAY/RECORD TIME  
FF/REW TIME  
HEADS  
Normal: 1 track; Hi-Fi: 2 track  
T-180 tape: SP 3 hours, SLP 9 hours  
T-120 tape: <2 minutes  
VCR  
Video:  
Audio:  
DA 4 rotary  
2 rotary heads (Hi-Fi); 1 stationary head (Linear)  
Control: 1 stationary head  
Erase:  
1 full track, 1 audio track  
WOW & FLUTTER  
FREQ. RESPONSE  
DISC COMPATIBILITY  
Less than 0.005% (Hi-Fi)  
20-20,000 Hz (Hi-Fi)  
CD, CD-R, CD-RW  
DVD-Video, CD-Digital Audio (5” and 3.5”)  
96/48 kHz Sampling: 4 Hz-22kHz  
110 dB  
FREQ. RESPONSE  
S/N RATIO  
DVD  
DYNAMIC RANGE  
THD  
96 dB  
0.003 %  
POWER REQUIREMENT  
ENVIRONMENT  
WEIGHT  
120V AC, 60 Hz, 25 watts  
SYSTEM  
41-104˚F (5-40˚C); 10%-75% humidity  
13.8 lbs.  
- Samsung Electronics Co., Ltd reserves the right to change the specifications with out notice.  
- Weight and dimensions are approximate.  
ENG-86  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MEMO  
ENG-87  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MEMO  
ENG-88  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MEMO  
ENG-89  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contact SAMSUNG WORLD WIDE  
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG  
customer care centre.  
Region  
Country  
CANADA  
MEXICO  
Customer Care Center  
1-800-SAMSUNG (7267864)  
01-800-SAMSUNG (7267864)  
1-800-SAMSUNG (7267864)  
0800-333-3733  
Web Site  
North America  
U.S.A  
ARGENTINE  
BRAZIL  
0800-124-421  
CHILE  
800-726-7864(SAMSUNG)  
0-800-507-7267  
1-800-10-7267  
COSTA RICA  
ECUADOR  
EL SALVADOR  
GUATEMALA  
JAMAICA  
800-6225  
1-800-299-0013  
1-800-234-7267  
800-7267  
1-800-682-3180  
1-800-751-2676  
1-800-7267-864  
1-800-100-5303  
02 201 2418  
844 000 844  
38 322 887  
09 693 79 554  
08 25 08 65 65 (0,15€/Min)  
01805 - 121213 (€ 0,12/Min)  
06 40 985 985  
199 153 153  
02 261 03 710  
0900 20 200 88 (€ 0.10/Min)  
231 627 22  
0 801 801 881  
80 8 200 128  
0850 123 989  
902 10 11 30  
08 585 367 87  
0870 242 0303  
8-800-200-0400  
8-800-502-0000  
1300 362 603  
800-810-5858, 010- 6475 1880  
2862 6001  
Latin America  
PANAMA  
PUERTO RICO  
REP. DOMINICA  
TRINIDAD & TOBAGO  
VENEZUELA  
BELGIUM  
CZECH REPUBLIC  
DENMARK  
FINLAND  
FRANCE  
GERMANY  
HUNGARY  
ITALIA  
LUXEMBURG  
NETHERLANDS  
NORWAY  
Europe  
POLAND  
PORTUGAL  
SLOVAKIA  
SPAIN  
SWEDEN  
U.K  
RUSSIA  
UKRAINE  
AUSTRALIA  
CHINA  
HONG KONG  
CIS  
3030 8282  
1600 1100 11  
INDIA  
INDONESIA  
JAPAN  
MALAYSIA  
PHILIPPINES  
SINGAPORE  
0800-112-8888  
0120-327-527  
1800-88-9999  
1800-10-SAMSUNG (7267864)  
1800-SAMSUNG (7267864)  
1800-29-3232  
Asia Pacific  
THAILAND  
02-689-3232  
TAIWAN  
0800-329-999  
1 800 588 889  
0860 7267864 (SAMSUNG)  
800SAMSUNG (7267864)  
VIETNAM  
SOUTH AFRICA  
U.A.E  
Middle East & Africa  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warranty  
LIMITED WARRANTY TO ORIGINAL PURCHASER  
This SAMSUNG brand product, as supplied and distributed by SAMSUNG ELECTRONICS AMERICA, INC.  
(SAMSUNG) and delivered new, in the original carton to the original consumer purchaser, is warranted by  
SAMSUNG against manufacturing defects in materials and workmanship for the following limited warranty period:  
One (1) Year Parts / Ninety days (90) Labor  
This limited warranty begins on the original date of purchase, and is valid only on products purchased and used in  
the United States, and does not include transportation, installation, removal or reinstallation.  
Warranty repairs must be performed by SAMSUNG’S authorized service center. To receive warranty service, the  
original dated bill of sale must be presented upon request as proof of purchase to SAMSUNG or SAMSUNG’S  
authorized service center. Transportation to and from the service center is the responsibility of the purchaser.  
SAMSUNG will repair or replace this product, at our option and at no charge with new or reconditioned parts, if  
found to be defective during the limited warranty period specified above. The product must be returned during the  
warranty period with transportation charges prepaid to SAMSUNG’s designated service center. Prior to returning  
any product for warranty service, the purchaser must contact SAMSUNG for problem determination and service  
procedures. SAMSUNG does not warrant uninterrupted or error-free operation of the product.  
All replaced parts and products become the property of SAMSUNG and must be returned to SAMSUNG.  
Replacement parts and products assume the remaining original warranty, or ninety (90) days, whichever is longer.  
This limited warranty covers manufacturing defects in materials and workmanship encountered in normal,  
noncommercial use of this product and shall not apply to the following, including, but not limited to: damage which  
occurs in shipment; applications and uses for which this product was not intended; failures or problems which are  
caused by products or equipment not supplied by SAMSUNG; accidents, misuse, abuse, neglect, misapplication,  
fire, water, lightning or other acts of nature; incorrect electrical line voltage, fluctuations or surges; damage caused  
by improper or faulty installation; improper connection with any peripheral; product alteration or modification;  
improper or unauthorized repair; cosmetic damage or exterior finish; product with altered serial numbers; failure to  
follow operating instructions, customer adjustments, maintenance and environmental instructions that are covered  
and prescribed in the instruction book; use of non-SAMSUNG or unauthorized parts, supplies, accessories or  
equipment which damage this product or result in service problems; failures or problems due to incompatibility  
with other equipment.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contact SAMSUNG WORLD WIDE  
If you have any questions or comments relating to Samsung products,  
please contact the SAMSUNG customer care center.  
1-800-SAMSUNG (7267864) / www.samsung.com  
Samsung Electronics America, Inc.  
105 Challenger Road  
Ridgefield Park, NJ 07660-0511  
1-800-SAMSUNG (7267864)  
AK68-00956B (02)  
US  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Remington Electric Shaver MPT 3500 User Guide
Renesas Computer Hardware R8C 2F User Guide
Royal Sovereign Laminator RSS 1050 User Guide
RTS Stereo Amplifier RM 325 User Guide
Russell Hobbs Appliance Trim Kit RHSLDW1B User Guide
Samsung Computer Monitor UD22B User Guide
Samsung DVR SMT 190 User Guide
Sanyo Flat Panel Television DP26640 User Guide
Schumacher Power Supply IP 1825FL User Guide
Sears Automobile 917252541 User Guide