YP-T5 Quick Guide
Location of Controls
Connecting the USB cable
➤ Before connecting the yepp to PC, make sure to install USB driver.
Neck strap Hook
Display
MENU, Navigation button/
Move to Track/Speed Search/
Volume Button
Connect a USB cable to the USB port on the
computer.
1
Loop Repeating Button
Play/Pause Button
Hold Switch
Recording Button
Microphone
Connect the other end of a USB cable to the USB
cable connection port on the bottom of the yepp,
2
and press the
button on the main unit.
➤ If you disconnect the USB cable from your PC while
implementing a command or initializing during USB
driver installation, your PC may not function correctly.
ENC Jack
Earphone Jack
Battery Cover
USB Cable
Connection Port
USB driver is installed with a message saying that
it is searching for a new device. You may not see
the display screen during installation.
Go to the device manager to check that
installation has been successfully completed.
3
4
Playing Music
Turning Power On and Off
➤ Power On : Press the
button to turn on the power.
Press the
button.
➤ Power Off : Press and hold the
button to turn off the power.
➤ Playback starts.
Upon installation of the USB driver
Pausing Music
"SAMSUNG YP-T5" will appear in the
[Start] ➤ [Settings] ➤ [Control Panel] ➤
[System Properties] ➤ [Device Manager].
Press the
button to pause playback.
➤ If no buttons are pressed within 10 seconds(changes depending on settings),
the yepp automatically powers off.
➤ While in Pause mode, briefly press
again to resume playback.
1
2
Download from Www.Somanuals.com. All Manuals Search And Download.
|