SAMSUNG ELECTRONICS CANADA, INC.
HEADQUARTERS
7037 Financial Drive, Mississauga, Ontario, Canada L5N 6R3
TEL: 1-905-542-3535
SERVICE DIVISION
7037 Financial Drive, Mississauga, Ontario, Canada L5N 6R3
1-800-SAMSUNG (1-800-726-7864)
- Sports Function Support
- 2xMP3 support
- 3D surround sound
- FM reception
- MP3 and WMA playback
- Encoding function
- 15 hours of continuous play
AH68-01467F (Rev 0.0)
Download from Www.Somanuals.com. All Manuals Search And Download.
Co n t e n t s
Additional Usage
Loop Repeating
MENU Mode
Chinging Modes
Setting the Advanced Functions
Playing Folders
Selecting the Play Mode
Selecting Sound Effects
Managing Files
● Deleting
● Formatting
TIME CONTROL
● WATCH TIME SET / POWER OFF TIME
● SLEEP TIME / BACKLIGHT
Setting the Environment
● DISPLAY
- INFORMATION / CONTRAST
● SOUND CONTROL
- WOW LEVEL
46
47
48
49
50
51
52
52
54
54
55
55
56
57
57
57
58
58
59
59
60
60
61
62
63
Preparations
Safety Instructions
Battery Charger Safety
Cautions for Recharging
Features
4
6
7
8
Accessories
Location of Controls (yepp)
11
12
Connection to Com puter
Connecting yepp to PC
Manual Installation of USB Driver
Using yepp Studio
● Downloading Files
● Creating 2xMP3 Files
● Downloading Albums
● Creating Folders
14
18
24
24
26
27
28
29
30
31
32
34
36
- ENCODE BIT RATE
- BEEP ON/OFF / DEFAULT VOLUME
● Setting Additional Regional Functions
- LANGUAGE / UNIT
Using Navigation
● Uploading Files
● Deleting Files
● Formatting
● To View Help on yepp Studio
Installing Fitness Manager
Using Fitness Manager
Setting FM
Using Sports Function
Appendix
MENU Table
Basic Usage
68
Playing Music and Turning Off the Device
Adjusting the Volume / Hold Function
Searching for Music/Voice Files
Encoding MP3s
Listening to FM Radio
Encoding From FM Radio
40
41
42
43
44
45
Custom er Support
Troubleshooting
Specifications
Safety Information
Warranty
70
72
74
76
2
3
Download from Www.Somanuals.com. All Manuals Search And Download.
S a fe t y In s t ru c t io n s
Earphones
Read and understand all the instructions to avoid injury to yourself and damage to the equipment.
Do not expose to extreme
temperatures (above 95°F or below
23°F). Do not expose to moisture.
Do not let any foreign matter
spill into the device.
Do not apply excessive pressure
to the device.
Follow Traffic Safety Instructions
● Do not use the earphones while driving an automobile or riding a bicycle.
It’s not only dangerous, but also against the law.
● An accident may result if you turn up the volume of the earphones too high while walking
down the street, especially when crossing at intersections.
Protect your ears
● Do not turn the volume up too high.
Do not use the unit near any
appliance that generates a strong
magnetic field.
Do not expose to chemicals such
as benzene and thinners.
Do not place heavy objects on
top of the device.
Doctors warn against prolonged exposure to high volumes.
● Stop using the device or turn the volume down if you get ringing in your ears.
Ambient operating conditions
● Ambient temperature : 5°C ~ 35°C (41°F ~ 95°F)
Do not expose to direct
sunlight or heat sources.
● Humidity : 10 ~ 75%
Do not store in dusty areas.
Do not try to disassemble and
repair the device yourself.
Environmental Information
● Follow local guidelines for waste disposal when discarding packaging, batteries,
and old electronic appliances.
● yepp packaging uses cardboard, polyethylene etc., and does not use
any unnecessary materials.
● Please be aware that we claim no responsibility for damage from data loss
due to breakdown, repair or other causes.
4
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Ba t t e ry Ch a rg e r S a fe t y
Ca u t io n s fo r Re c h a rg in g
A charger is provided with the YP-60.
Please be sure to only use the provided adapter.
CAUTION
RISK OF ELECTRIC SHOCK. DO NOT OPEN
!
Plug the charger into a wall outlet.
● When recharging is complete,
“FULLY CHARGED” is shown in the display window.
● Recharging continues to take place even when
the USB cable is connected.
The uninsulated parts inside the charger can
cause electric shock.
For your safety, do not open the charger’s case.
Caution
● Do not charge longer than the specified charge time to avoid risk of fire.
● Do not plug several devices into the same outlet.
Read this User Manual to prevent any problems that
may occur while using the charger.
!
● Do not use a damaged internal rechargable battery or recharge adapter.
● When using the rechargeable battery for the first time or after several
months of non-use, fully charge it first.
● Do not charge the rechargeable battery for more than 6 hours.
● Overcharging or overdischarging will reduce battery life.
● You should check the recharging time and switch to a new internal rechargable battery
when the battery life becomes low.
Warning
● Use the charger away from water sources to avoid fire or electric shock.
● The rechargeable battery is a consumable item and its capacity will decrease gradually.
● To prolong the life of your battery, use the fully charged battery until it is completely
discharged, and then fully charge it again before use. If you charge a battery that is not
completely drained, the battery operating time will decrease. In this case, repeat the full
charge/discharge cycle several times.
Caution
● To avoid electric shock, Use the charger only with a power outlet that matches
the converter's plug.
● Make sure that the charger's plug is inserted all the way into the outlet.
● Do not let metallic objects, such as necklaces or coins, come into contact with the
terminals (metallic parts) of the charger and the built-in rechargeable battery.
A fire or electric shock may result.
● Be careful not to touch the recharge adapter with wet hands.
6
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Sports Function Support
3D surround sound
●
Using the Consumed Calories, Heartrate and Stopwatch functions will help you
exercise much more efficiently and scientifically.
●
You will hear deep bass and 3D surround sound.
is a trademark of SRS Labs, Inc.
●
WOW technology is incorporated under license from SRS labs, Inc.
Encoding Function
●
You can make an MP3 file from an external source using the ENC jack
on the main unit.
You can also convert an FM radio program into an MP3 file in real time.
MP3 & WMA Playback
●
MP3 is an MPEG1 Layer3 audio format.
●
●
WMA is a Microsoft Windows Media audio format.
8
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Ac c e s s o rie s
FM Reception
Earphones
Arm band
Finger Clip
User manual
Player
●
Listening to an FM program is made easy with Auto Search and Frequency
Memory functions.
Sound
Earphone
extension cable
●
You can adjust the equalizer manually.
Line In cable
USB cable
Charger
Installation CD
Model
YP-60 H
128MB
YP-60 V
256MB
YP-60 X
512MB
YP-60 Z
1GB
15-Hour Continuous Play
Built-in memory
●
Use a lithium polymer rechargable battery in order to play continuously for
up to 15 hours.
● The capacity of the useable built-in memory is less than indicated as the internal firmware
uses a part of the memory as well.
● Design of accessories is subject to change, for the purposes of improvement, without notice.
10
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Lo c a t io n o f Co n t ro ls (ye p p )
Display
Heart Rate Measurement Sensor
Earphone Jack
Equalizer, SRS indicator
Folder Play Indicator
Hold Switch
Calorie Measurement Indicator
Sleep Time indicator
Time indicator
Display
Remaining Battery
Power indicator
MENU/
07:32AM
001
Play/Stop/Pause
On/Off Button
Nor
Loop Repeating Button
Mode indicator
Title (track & artist) indicator
Playtime indicator
Track 1
Volume Button
NOR
0 0 : 0 1 : 3 0
ENC/NAVI.
Button
Sports Function Button
Track Number indicator
Play mode/Interval repeat indicator
Play/Stop/Pause indicator
USB Cable
Connection Port
ENC Jack
Move to Track/
Speed Search Button
Reset Hole
Note
● If the device won’t respond even after pressing the buttons, reboot it by pressing the Reset Hole with a pin.
12
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Co n n e c t in g t h e ye p p t o a P C
Before connecting yepp to PC, make sure to install
System
yepp Studio. If “Add New Hardware Wizard”appears,
press the [Cancel] button and install yepp Studio.
Requirements.
The PC system must meet the
following specifications:
Choose the language you wish to use.
2
3
Installing software
● Pentium 133MHz or greater.
● Windows 98 SE/ME/2000/XP.
● 40MB of available hard disk space
● CD-ROM drive.
Insert the Installation CD into the CD-ROM drive.
The picture shown below appears.
Select [yepp Studio].
1
(double speed or greater)
● USB port (1.1) supported.
● VGA graphics.
Click [Next] in the series of windows
that appear.
● DirectX 8.0 or above.
Note
● Windows ME, 2000 and XP can
recognize the driver without installing
the provided program. However,
you must install the program in order to
format the yepp and upgrade the firmware.
Continued...
14
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Co n n e c t in g t h e ye p p t o a P C
Connecting the yepp to a PC with a USB cable
How to check the USB driver
●
Windows 98/ME:
Control Panel System
Disk drives SAMSUNG YP-60
Connect a USB cable to the USB port on the computer.
4
●
●
Device Manager
●
●
Connect the opposite end of the USB cable to the USB cable
port on the right side of the yepp.
5
6
7
●
Windows 2000:
Control Panel
●
System
●
Hardware
●
●
● If you disconnect the USB cable from your PC while
implementing a command or initializing during
USB driver installation, your PC may not function correctly.
Device Manager
●
Disk drives
●
SAMSUNG YP-60 USB Device
●
Windows XP:
Control Panel
Device Manager
SAMSUNG YP-60 USB Device
●
System
● Hardware
The USB driver is installed with a message saying that
it is searching for a new device. You may not see the
display screen during installation.
Go to the device manager to check that
installation has been successfully completed.
●
Disk drives
●
When the USB driver is not installed automatically, refer to the next page.
8
Upon installation of the USB driver
"SAMSUNG YP-60" will appear in the
[Start]
●
[Settings]
●
[Control Panel]
●
[System Properties]
●
[Device Manager].
16
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Ma n u a l In s t a lla t io n o f t h e US B Drive r
Go to “Using yepp Studio” on page 24 if the USB driver is in place.
Follow these steps if the USB driver is not in place.
When an error occurs during installation of the USB driver
After selecting the driver,
click on [Update Driver].
Select a compatible driver,
click on [Next] to finish.
4
5
Check the device manager.
1
● Windows 98,ME:
Control Panel
●
System
●
●
Device Manager
● Windows 2000:
Control Panel
●
System
Hardware
Hardware
●
●
Device Manager
● Windows XP:
Control Panel
●
System
●
Device Manager
Check if there is a device listed with an
exclamation point or a question mark
(displayed as unknown device or USB device).
2
3
Double click on the device listed with an
exclamation point or a question mark.
18
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Ma n u a l In s t a lla t io n o f t h e US B Drive r
In Windows XP
Select [Search removable media]
or select [Include this location in
the search] and designate
[CDROM]\Drivers\win2k_winxp.
For example
Click the [Finish] button
when installation is complete.
Select [Install from a list or specific location] and click the [Next] button.
1
2
3
E:\Driver\win2k_winxp.
● You must reboot your computer to complete the installation.
20
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Ma n u a l In s t a lla t io n o f t h e US B Drive r
In Windows 2000
In Windows 98
Click [Next] in the series of windows that appear.
Click [Next] in the series of windows that appear.
Select [Specify a location]
and then select
[CD-ROM]\Drivers\win98_winme.
Š
Select [Specify a location]
and then select
Š
[CD-ROM]\Drivers\win2k_winxp.
● You must reboot your computer to complete the installation.
● You must reboot your computer to complete the installation.
22
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Us in g ye p p S t u d io
Downloading Files
Turn on the yepp and connect it to your PC.
When the Download List Window appears, click the
● The selected files are sent to the yepp.
button.
1
2
3
5
● You can change to the desired font when downloading.
Click [yepp Studio] on the desktop.
Select the file you wish to download from the Play List Window or File List Window
● If the Play List Window is empty, use the [Open Files] button on the main window or
drag-and-drop the desired files from the File List Window to the Play List Window.
.
Drag-and-drop the selected files to the Music folder in the yepp window or click
4 the [Transmit to yepp] button to move the files.
Note
● Refer to Help for more detailed information about using yepp Studio.
● When running the yepp Studio for the first time, input the serial number listed on the back of the
yepp when the Product Number Registration Window appears.
● You cannot use yepp Studio while Fitness Manager is running.
24
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Us in g ye p p S t u d io
Creating 2xMP3 Files
Downloading an Album
Click the
button on the
After selecting the Limit BitRate first,
Turn on the yepp and connect it to your PC.
1 Download List Window.
2 move scroll bar with mouse to adjust
1
the file size.
After selecting the album that you
When the Download List Window
2 wish to download from the Album List 3 appears, click the
button.
Window, drag-and-drop the album to
the Music folder in the yepp window.
● The selected album is sent to the yepp.
Click the
button.
3
● Files converted to 2xMP3 are sent to the yepp.
Note
Note
● Refer to Help for more detailed information about using yepp Studio.
● Refer to Help for more detailed information about using yepp Studio.
● Limit Bitrate means the minimum sound quality(Bitrate) when transfering to 2xMP3.
By selecting the level of LimitBitrate, you can change the level of sound quality.
● Albums can only be downloaded to the Music folder.
26
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Us in g ye p p S t u d io
Creating a Folder
Uploading Files
Turn on the yepp and connect it to your PC.
Turn on the yepp and connect it to your PC.
1
2
1
2
Click [yepp Studio] on the desktop.
Click [yepp Studio] on the desktop.
After selecting the files to upload in the yepp
After clicking in the Music folder
When the Making New Folder Window
3 window, click the [Transmit to yepp] button
3 using the right mouse button,
4 appears, click [OK] after entering the
at the bottom of the window.
select [Make Folder].
folder name.
● A new sub-folder is created under
the Music folder.
After selecting the folder to save the files
4 to when the Folder Setting Window
appears, click the [OK] button.
Note
Note
● Refer to Help for more detailed information about
using yepp Studio.
● Refer to Help for more detailed information about using yepp Studio.
● Up to 100 folders can be created in the Music folder.
● Only subfolders of the Music folder can be deleted.
● MP3 and WMA formatted files that are in the Music
folder are not uploaded to the PC.
28
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Us in g ye p p S t u d io
Deleting a File
Formatting
Turn on the yepp and connect it to your PC.
Turn on the yepp and connect it to your PC.
1
2
1
2
Click [yepp Studio] on the desktop.
Click [yepp Studio] on the desktop.
After selecting the file that you want
Click [Yes] when the confirm
After clicking in the yepp window
Click [Yes] when the confirm
3 to delete in the yepp window,
4 window appears.
3 with the right mouse button,
4 window appears.
click the [Delete] button.
● The selected file is deleted.
select [Format].
Note
Note
● Refer to Help for more detailed information about using yepp Studio.
● Refer to Help for more detailed information about using yepp Studio.
30
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Us in g ye p p S t u d io
To View Help on yepp Studio
Run yepp Studio and press F1.
Note
● Help will appear.
● Music recognition technology and related data are provided by Gracenote and Gracenote CDDB®
Music Recognition ServiceSM
.
Move the arrow to the top of yepp Studio and right click on the mouse.
The following selection window will appear.
● CDDB is a registered trademark of Gracenote. The Gracenote logo and logotype, the Gracenote CDDB
logo and logotype, and the "Powered by Gracenote CDDB" logo are trademarks of Gracenote. Music
Recognition Service and MRS are service marks of Gracenote.
● Click on Help and the Help window will appear.
● If a firewall is installed on the PC, it may not be possible to import CDDB information.
N
32
33
Download from Www.Somanuals.com. All Manuals Search And Download.
In s t a llin g Fit n e s s Ma n a g e r
Insert the Installation CD into your PC's CD-ROMdrive.
Select [Fitness Manager].
Click [Next] in the series of windows that appear.
1
3
Choose the language you wish to use.
2
34
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Us in g Fit n e s s Ma n a g e r
When connecting to Fitness Manager for
3 the first time, click [New Account] and
Log In
create a new username of 6 letters or less.
Turn on the yepp and connect it to your PC.
1
2
Click [yepp Sports Fitness Manager] on the desktop.
Press the [OK] button after entering your
personal information.
4
After entering a username and password,
5 log in by clicking [Login].
Set a nickname for the
YP-60 that you are using.
Š
Note
- No more than 6 English
characters can be entered.
● Input up to six English letters.
In order to upload the measured data that was saved on the device to a PC,
yepp Studio must be installed.
● If Fitness Manager is run after connecting the device to the PC, the measured
data saved on the device will be updated automatically to the PC and then deleted.
● Fitness Manager cannot be used while yepp Studio is running.
36
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Us in g Fit n e s s Ma n a g e r
[Calorie Chart]
Setting Up a User
● Click [Calorie Chart].
● You can change user information or delete a user.
● You can check the calories consumed
as a result of exercise in units of years,
months and days.
Turn on the yepp and connect it to your PC.
1
2
: Displays calorie data for one year based
on the current point.
Click [Account] after selecting
Fitness Manager.
: Displays calorie data for one month based
on the current point.
After setting up the user,
: Displays calorie data by time as of today.
3 click the [OK] button.
Setting Up a New User
Deleting a User
[Biorhythm]
Using Fitness Manager
[Calorie List]
● Click [Biorhythm].
● You can check the biorhythm of the
selected user.
● Click [Calorie List].
● You can see the measured data that has been saved.
- Data : Displays the data and time when a user takes exercise.
- Exercise time : Displays the exercise in Hour and Minute.
- Starting HR : Displays Heart rate(bmp) before exercise.
- Final HR : Displays Heart rate(bmp) after exercise.
- Calorie Data : Displays the calorie consumption(kcal).
- Remark : Displays the contents that a user enters.
Note
● If [Edit Profile] is clicked, personal information can be changed.
● The resulting graph of the biorhythm reflects the statistical values of the
measured data and so may be different from the actual values.
● Refer to Help for more detailed information about using yepp Studio.
38
39
Download from Www.Somanuals.com. All Manuals Search And Download.
P la yin g Mu s ic a n d Tu rn in g Off t h e De vic e
Ad ju s t in g t h e Vo lu m e /Ho ld Fu n c t io n
Turning Power On and Off
Adjusting the Volume
● Power On : Press and hold the
button to turn on the power.
button to turn off the power.
Press the
,
buttons to adjust the volume.
07:32AM
001
Nor
30
● Power Off : Press and hold the
NOR
0 0 : 0 1 : 3 0
Playing Music
Note
●
The volume can be adjusted in increments between 0 and 40.
07:32AM
001
Nor
Press the
button.
●
Press once to adjust the volume by one step.
Track 1
● Playback starts.
sports
Press and hold to increase or decrease the volume in greater increments.
NOR
0 0 : 0 1 : 3 0
HOLD Function
Pausing Music
In Hold mode, all buttons are disabled.
07:32AM
001
Nor
Press the
button to pause playback.
Track 1
GOOD BYE
● While in Pause mode, briefly press
NOR
0 0 : 0 1 : 3 0
Slide the
switch on the player in the
again to resume playback.
direction of the arrow.
HOLD!
●
When the button is pressed,
Note
the “ HOLD!” message will appear on
the display.
● WMA files can be played only as music files with a compression rate of 64Kbps-192Kbps,
that can be created in Windows Media Player (Version 8.0).
● The power off time can be set in the menu.
40
41
Download from Www.Somanuals.com. All Manuals Search And Download.
S e a rc h in g fo r Mu s ic /Vo ic e File s
En c o d in g MP 3 s
Connect the Audio Output port on the external audio source
To search for specific parts during play
1 (or the Line Out port) to the ENC port on the device with the Line in cable.
● A desired passage can be searched for by pressing and holding down the
,
buttons during play.
To change tracks during play
● If the
button is pressed during play, the next track is played.
button is pressed before five seconds have passed since starting to play a track,
button is pressed after five seconds,
the current track is replayed from the beginning.
● If the
the previous track is played and if the
If the ENC button is pressed, MP3 encoding begins.
2
● If the
button is pressed, encoding is paused and if the
button is pressed again,
the encoding resumes.
To change tracks when stopped
If the ENC button is pressed during encoding, the encoding stops and an
encoding file is created.
● Encoding is performed in order (ENC001, ENC002, etc.)
and files are saved in the MP3 format after encoding.
3
● If the
,
buttons are pressed when stopped, the yepp moves
to the previous or next track, respectively.
Note
Note
● VBR(Variable Bit Rate) file: A file that constantly changes the compression rate according
● The bit rate can be set to 64Kbps, 96Kbps and 128Kbps.
to the type of sounds, such as their pitch, in the file.
● During encoding, there is no beeping sound and the button lights and
● With VBR files, pressing the
in the previous track playing.
button within 5 seconds from the start of the track may not result
backlight do not illuminate.
Caution
● Files that were downloaded in MP2 or MP1 and had their file extension changed to MP3 may not play.
● Do not disconnect the Line cable during Encoding.
● If the battery is not sufficiently charged, encoding will not be done.
● Adjust the volume of the external audio source to a suitable level and encode it.
If the volume level is extremely high, the sound quality may not be good.
42
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Lis t e n in g t o FM Ra d io
En c o d in g Fro m FM Ra d io
Select FM mode first. (Refer to "Changing Modes" on page 48)
Doing FM encoding
Manual Search for a Frequency
Press the ENC button during FM reception.
1
● Press the
,
buttons to search manually for
● Encoding of the currently transmitted
07:32AM
the desired frequency.
FM broadcast begins.
91.90MHz
FMCH — —
Press the ENC button again.
2
● A file is created and the encoding stops.
● Files are saved in order, starting FM001,
FM002...etc., and stop automatically when
the memory is full.
Automatic Search for a Frequency
● Press and hold the
,
buttons in order to
07:32AM
search for and stop at frequencies with reception.
91.90MHz
FM Scan
Note
● During encoding, there is no beeping sound and the button lights and back light do not illuminate.
● Encoded files will become 64Kbps files after they are encoded from FM.
44
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Lo o p Re p e a t in g
MENU Mo d e
Press and hold the
After navigating with the
button while in Music/Voice Mode.
Starting Point
Ending Point
,
buttons, press the
button is pressed.
button to select the desired menu.
Menu mode is cancelled if the
While playing music files, press the
button briefly at the
beginning of the loop you want to
set.
Press the
again to set the end of the loop.
button briefly
MENU
EXIT
MENU
MODE SELECT
A
appears in the display.
B
MODE SELECT
SETTING
The loop is played repeatedly.
SETTING
NAVIGATION
appears in the display.
A
07:32AM
001
Nor
07:32AM
001
Nor
MENU
MENU
NAVIGATION
SETTING
Track 1
Track 1
FM SETTING
EXIT
NAVIGATION
FM SETTING
A
A
0 0 : 0 1 : 3 0
0 0 : 0 1 : 3 8
B
● MODE SELECT : When changing modes.
● SETTING : When changing the yepp’s advanced functions.
● NAVIGATION : When performing a simple search for saved music files.
● FM SETTING : When saving frequencies automatically or checking saved frequencies.
● EXIT : To exit MENU.
Note
● Press the
button briefly to cancel the loop.
Note
● Loop Repeat is automatically released if you Speed Search with the
,
buttons.
● In MENU mode, no input for 30 seconds will cancel the MENU mode.
46
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Ch a n g in g Mo d e s
S e t t in g Ad va n c e d Fu n c t io n s
Press and hold the
button.
Select SETTING in the MENU. (Refer to “MENU Mode”)
1
2
3
1
2
In SETTING, after moving to the desired function with the
,
button,
After using the
,
button to move to MODE SELECT, press the
button.
press the
button.
Move to the mode you want by using the
press the button.
,
button, and then
SETTING
EXIT
SETTING
SETTING
ENVIRONMENT
EXIT
TIME
FOLDER PLAY
ENVIRONMENT
EXIT
MODE SELECT
MODE SELECT
LINE ENC
EXIT
MODE SELECT
PLAY MODE
FOLDER PLAY
EXIT
MUSIC
FM
FM ENC
LINE ENC
EXIT
SETTING
FILE
SETTING
SOUND EFFECT
FILE
SETTING
MUSIC
PLAY MODE
SOUND EFFECT
FILE
Music Mode
EXIT
LINE ENC Mode
TIME
ENVIRONMENT
TIME
MODE SELECT
MODE SELECT
FM
MUSIC
FM
FM ENC
LINE ENC
FM ENC
FM ENC Mode
FM Mode
48
49
Download from Www.Somanuals.com. All Manuals Search And Download.
P la yin g Fo ld e rs
S e le c t in g t h e P la y m o d e
Select FOLDER PLAY in SETTING.
Select PLAY MODE in SETTING.
1
2
1
2
FOLDER PLAY
● The saved folders are shown.
F
MUSIC
Love You
LOCK
In PLAY MODE, after moving to the desired mode with the
,
button,
press the
button.
PLAY MODE
PLAY MODE
PLAY MODE
EXIT
NORMAL
REPEAT ONE
REPEAT ALL
SHUFFLE
In PLAY MODE, after moving to the desired folder
NORMAL
REPEAT ONE
REPEAT ONE
REPEAT ALL
07:32AM
Nor
with the
,
button press the
button.
● The files in the selected folder are played.
● FOLDER PLAY does not work when there
aren’t any files in the folder.
Track 1
PLAY MODE
PLAY MODE
NOR
001
0 0 : 0 1 : 3 0
REPEAT ALL
SHUFFLE
EXIT
SHUFFLE
EXIT
NORMAL
● Move to each respective mode by selecting
MUSIC, FM ENC or LINE ENC.
● NORMAL : To play all the tracks in order one time.
● REPEAT ONE : To repeat one track.
● REPEAT ALL : To repeat all tracks.
● SHUFFLE : To play tracks at random.
● EXIT : To move to the higher-level menu.
50
51
Download from Www.Somanuals.com. All Manuals Search And Download.
S e t t in g S o u n d Effe c t s
EQ
Select SOUND EFFECT in SETTING.
1
2
Use the
,
buttons to move
1to the setting you want
EQ
EQ
In SOUND EFFECT, after moving to the desired sound mode with the
,
button,
EXIT
JAZZ
(out of the 4 settings available)
and press the button to select.
press the
button.
NORMAL
CLASSIC
ROCK
NORMAL DBB
SOUND EFFECT
SOUND EFFECT
TRUBASS
WOW
EXIT
EQ
EQ
EQ
USER EQ
EXIT
CLASSIC DBB
JAZZ DBB
SRS
EXIT
NORMAL
ROCK DBB
● EQ : You can adjust the equalizer manually.
If you want to manually adjust
the equalizer, select User EQ
and Bass/Treble.
● SRS (
) : You will hear 3D Stereo sound.
2
USER EQ
USER EQ
● TRUBASS (
) : This is a bass boost feature that adds fullness to the sound.
EXIT
BASS
TREBLE
EXIT
BASS
TREBLE
● WOW : This feature allows you to enjoy the SRS and Trubass features simultaneously.
● BASS/TREBLE can each be
● EXIT : To move to the higher-level menu
adjusted from 0 to 10 with
the
,
button.
BASS
TREBLE
6
5
Note
● Please adjust the volume to a suitable level, as the volume may increase in the SRS setting.
● This unit supports sampling frequencies of 32KHz, 44.1KHz or 48KHz.
● You can only set SRS functions in Music Mode. (Except for 2xMP3 files)
52
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Ma n a g in g File s
TIME CONTROL
Select TIME in SETTING.
Deleting
WATCH TIME SET
Select FILE in SETTING.
1
● Select the method of setting the clock time using
WATCH TIME SET
Select DELETE and then move to the file you
EXIT
the
,
button.
2 wish to delete.
MUSIC DELETE
AUTO TIME SET
MANUAL TIME SET
● AUTO TIME SET : Automatically sets the clock time
when connected and sending
EXIT
● If EXIT is selected, files in other folders can
001:Track 1.mp3
002:Track 2.mp3
also be selected.
data to a PC.
● MANUAL TIME SET : The clock time can be set manually.
Select CONFIRM in the DELETE CONFIRM Window
● Select CONFIRM to finish setting the time after setting manually.
3 after pressing the
DELETE CONFIRM
button.
CONFIRM
CANCEL
● The selected file is deleted.
POWER OFF TIME
● Use the
,
buttons to set the POWER OFF TIME.
Formatting
● The power off time can be set from 3 to 180 seconds.
After stopping playback, the power is turned off
automatically if no buttons have been pressed
during the set time.
POWER OFF TIME
120 sec
FILE
Select FILE in SETTING.
1
DELETE
FORMAT
EXIT
Select FORMAT in FILE.
● When set to NO POWER OFF, the power does not
turn off even when the device is stopped.
2
● Formatting is performed if CONFIRM is selected.
FORMAT
Note
CONFIRM
CANCEL
● All files are deleted if the yepp is fomatted.
54
55
Download from Www.Somanuals.com. All Manuals Search And Download.
TIME CONTROL
S e t t in g t h e En viro n m e n t
Select ENVIRONMENT in SETTING.
SLEEP TIME
DISPLAY
● Use the
,
buttons to set the SLEEP TIME.
SLEEP TIME
150 min
● The sleep time can be set from 3 to 180 minutes.
The power turns off automatically after the set time
has passed.
Select DISPLAY in the ENVIRONMENT.
INFORMATION
● When set to NO SLEEP, the power does not turn off
automatically.
● Use the
,
buttons to select the music mode and
select the content to be displayed at the top of the Screen
Display Window.
INFORMATION
EXIT
BACKLIGHT TIME
PLAY TIME
REMAIN TIME
● PLAY TIME : Displays the current play time
● REMAIN TIME : Displays the remaining play time
● REMAIN MEMORY : Displays the remaining memory
● BIT RATE : Displays the wave bit rate that is being played
●
Use the
,
buttons to set the Backlight “ON” time.
BACKLIGHT TIME
15 sec
● The setting range for Backlight-On Time is 0 to 30
seconds.
● When set to Always On, the backlight stays on
continuously.
CONTRAST
● Use the
,
buttons to set the Contrast.
CONTRAST
● The setting range for the contrast, which adjusts the
brightness of the screen, is from 0 to 15.
11
Note
● The backlight does not illuminate when the residual battery level is insufficient.
56
57
Download from Www.Somanuals.com. All Manuals Search And Download.
S e t t in g t h e En viro n m e n t
ENCODE BIT RATE
● Use the
,
buttons to set the desired MP3
SOUND CONTROL
ENCODE BIT RATE
96 kbps
encoding bit rate.
● You can set the desired bit rate to 64kbps, 96kbps or
128kbps when doing MP3 encoding.
Select SOUND in ENVIRONMENT.
WOW LEVEL
BEEP ON/OFF
● The levels of SRS and TRUBASS
● Use the
,
buttons to set the BEEP mode.
can be adjusted.
SRS LEVEL
8
TRUBASS LEVEL
BEEP ON/OFF
● BEEP ON : A beep sounds each time a button is
pressed.
● Use the
,
buttons to select the
Level
8
Level
level you want.
ON
● BEEP OFF : No beep sounds when a button is pressed.
● The level for SRS and TRUBASS can
OFF
each be set within the range of 0 to 10.
DEFAULT VOLUME
● If OPTIMIZATION is selected, the SRS function is
optimized to the connected device.
OPTIMIZATION
● Use the
,
buttons to set the DEFAULT VOLUME.
EARPHONE
HEADPHONE
CARPACK
● Set the desired device to earphone, headphone,
speaker or carpack (car cassette adapter)
● It is possible to set the default volume to a value
between 0 and 40. If the power is turned on again after
having adjusted the volume above the default value,
music is played at the default volume.
DEFAULT VOLUME
22
by using the
,
buttons.
● If the power is turned on again after the volume was set to
within the default value, the music is replayed at the
previously played volume.
58
59
Download from Www.Somanuals.com. All Manuals Search And Download.
S e t t in g t h e En viro n m e n t
Us in g Na vig a t io n
Setting Additional Regional Functions
Press and hold the
button.
1
2
NAVIGATION
● The file that is currently being played is shown.
EXIT
Select COUNTRY in ENVIRONMENT in SETTING.
001 : Track 1.mp3
002 : Track 2.mp3
LANGUAGE
After using the
,
button to move to NAVIGATION, press the
button.
● Use the
,
button to select the desired menu
● If EXIT is selected, you can move to another folder.
LANGUAGE
language from among nine languages.
● The menu is shown in the selected language.
● SETTING, ENVIRONMENT, COUNTRY and
LANGUAGE are shown only in English.
ITALIAN
JAPANESE
KOREAN
NAVIGATION
EXIT
MUSIC
Love You
NAVIGATION
NAVIGATION
EXIT
002:Track 2.MP3
EXIT
001:Track 1.MP3
002:Track 2.MP3
001:Track 1.MP3
UNITS
Select the file or folder that you want to play.
● Use the
,
button to select kg/m or lb/ft as the
3
UNIT
measurement units.
●
●
●
,
: When entering a folder or when playing a file.
EXIT
kg/m
lb/ft
: When moving to a higher-level folder. When leaving NAVIGATION mode.
: When moving to a file or folder in the same directory.
,
60
61
Download from Www.Somanuals.com. All Manuals Search And Download.
S e t t in g FM
Us in g S p o rt s Fu n c t io n
● Caution when measuring your heart rate
Automatic Storage of a Frequency
- Don’t press too hard when placing your finger on the sensor.
Press and hold the
button while in FM Mode.
- Don’t move your finger during measurement.
1
2
● FM SETTING is shown.
After moving to AUTO PRESET using the
button, press the button.
,
Setting the User
07:32AM
● Frequencies within the range of 87.5MHz to
108MHz are automatically selected and stored.
● Frequencies are automatically stored,
starting from 1.
91.90MHz
Before using the sports functions select the user.
FM Scan
Press the Sports Function Select
button.
1
2
PROFILE
EXIT
Select PROFILE in SPORTS FUNCTION.
TRY IT
Searching Stored Frequencies
Press and hold the
button while in FM Mode.
1
2
Select a user ID registered on the PC or TRY IT
and set the age, sex, height and weight
of the user.
● FM SETTING is shown.
3
4
EDIT PROFILE
NAME
AGE
: GUEST
: 20
Press the
button after using the
,
buttons
FM CHANNEL
to move to the desired FM CHANNEL.
CH1 95.9 MHz
CH2 91.9 MHz
CH3 89.1 MHz
GENDER : MALE
Select CREATE after the setting is complete.
Note
Note
● You can store up to 20 frequencies.
● When measuring after selecting TRY IT, data is not saved.
62
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Us in g S p o rt s Fu n c t io n
Measuring Calories Consumed
Measuring Heartrate
Measure your heart rate before and after exercise in order
to find out the calories burned.
CALORIE COUNTER
Press the Sports Function Select
button.
USER
Try It
1
2
END
CALORIE
Before starting exercise, press the Sports Function
1st Check
1
2
Select
button.
Press the
button in SPORTS FUNCTION
HEART RATE
USER
and select HEART RATE MONITOR.
Select CALORIE COUNTER in SPORTS FUNCTION.
CALORIE COUNTER
● The selected user and whether a
Try It
Place your finger
on sensor and
press button
● Shows the selected user and whether or not
measurement has started will be shown.
measurement has started.
After placing your finger on the sensor on the
HEART RATE
3 top of the device, press the
button.
Place your finger
on sensor and
press button
CALORIE COUNTER
Measuring
82bpm
● Measurement of heart rate starts.
● When the heart rate measurement finishes, the
heartrate that was measured is saved automatically
and a “ ” indicator is shown in the display window.
After putting your finger on the sensor on the
3
HEART RATE
Measuring
top of the device, press the
button.
Measure your heart rate one more time after finishing
82bpm
4 your exercise as in #2 and #3 above.
● Heart rate measurement starts.
● When measurement is complete,
the heart rate is shown on the screen.
● Shows the calories consumed by your exercise.
● The calories are shown in kcal units.
HEART RATE
If you want to save the data, select CREATE.
S
72
E
101
5
082
● The measured data is saved.
64
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Us in g S p o rt s Fu n c t io n
Measuring Lap Time
Checking the Database
You can measure the user’s interval time when exercising,
such as when jogging or running a marathon.
Press the Sports Function Select
button.
Press the Sports Function Select
button twice.
1
2
3
1
2
VIEW CALORIE
72
CALORIE
03.01.01
● Shows the STOP WATCH.
Select DATABASE in SPORTS FUNCTION.
S
E
T
101
576
12:07
:
D
To see the consumed calories measured,
select VIEW CALORIES. To see the heart rate,
select VIEW HEART RATE.
Press the ENC/NAVI. button.
VIEW HEART RATE
HEART RATE
● Time measurement starts.
: 96
● Shows the most recently measured data.
DATE
TIME
: 03.01.01
: 12:07
Press the
measurement.
button during time
3
STOP WATCH function
● “LAP” is shown and the lap time is recorded every
time the button is pressed.
● A maximum of three lap times can be recorded.
● Press the button to record up to
Press the Sports Function Select
button twice.
1
● Shows the STOP WATCH.
three lap times and then press the
button to stop.
The three lap times and ending time are shown.
Press the ENC/NAVI. button.
2
3
● Time measurement starts.
Press the ENC/NAVI. button one more time.
● The time measurement finishes.
66
67
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU Ta b le
● Use the
,
button to navigate and then select using the
button.
68
69
Download from Www.Somanuals.com. All Manuals Search And Download.
Tro u b le s h o o t in g
The buttons do not work.
The software doesn’t work
● Check the Hold switch setting.
● Refer to the recommended PC specifications.
● Press the RESET hole on the side of the main unit with a pin.
The yepp does not work and the LCD displays nothing.
The yepp keeps turning off.
● Check the condition of the rechargable battery.
● In Stop mode, the power is automatically turned off after ten seconds (changes depending on settings).
● Press the RESET hole on the side of the main unit with a pin.
● Check to see if there are files saved in it. The yepp will be turned off if no files are saved in it
In PLAY mode, music is not played after pressing the
button
Something is wrong with the play time displayed during Play mode.
● Verify that the device is currently set to Music mode.
● Check to see if MP3 or WMA files are saved in the built-in memory.
● Check to see if the HOLD switch is locked.
● “VBR SONG” message is displayed instead of play time while VBR
(Variable Bit Rate) file is playing.
● Check if the REC button is on.
LCD window is dark
● Check Contrast.
Files cannot be downloaded.
● Check the condition of the rechargable battery.
Strange characters are displayed on the screen during playback.
● Check the connection between yepp and computer.
● Check and/or replace the battery, turn on the yepp's power.
● Change the font settings in the Download List Window to the correct font.
Backlight does not work.
● Check the backlight setup.
● When the current and voltage of the rechargeable battery are low,
the backlight automatically stays off in order to play longer.
70
71
Download from Www.Somanuals.com. All Manuals Search And Download.
S p e c ific a t io n s
S a m s u n g Lim it e d Wa rra n t y
S a m s u n g Ele c t ro n ic s Ca n a d a In c . (S ECA),
warrants that this product is free from defective m aterial and workm anship.
Model
Built-in Memory capacity
Voltage
YP-60
128MB(YP-60 H)/256MB(YP-60 V)/512MB(YP-60 X)/1GB(YP-60 Z)
SECA further warrants that if this product fails to operate properly within the
specified warranty period and the failure is due to im proper workm anship or
defective m aterial SECA will repair or replace the product at its option.
3.7V (Li-polymer battery)
Playing time
Lasts up to 15hours (MP3 128Kbps, Vol level 20)
Recharge time
Approximately three hours.
All warranty repairs m ust be perform ed by a SECA authorized service
centre. (The nam e and address of the location nearest you can be obtained by
calling toll free 1 -8 0 0 -7 2 6 -7 8 6 4 or visiting our web site at w w w .s a m s u n g .c a )
Maximom number of files that can be saved
Dimensions/Weight
Case
Up to 256 files (per folder).
1.53X3.66X0.66 inch/1.6 oz (Battery included)
Plastic
La b o u r
P a rt s
Noise Ratio
80dB with 20KHz LPF
o n e (1 ) ye a r (c a rry-in )
o n e (1 ) ye a r
Earphones Jack Output Power
Output Frequency Range
Operating Temperature Range
FM Frequency
6mW(Max 10mW)/CH (16 Ω)
20Hz~20KHz
On carry-in m odels, transportation to and from the service centre is the
custom er’s responsibility.
-5 ~ +35°C(23~95°F)
87.5 ~ 108.0 MHz
The original dated sales receipt m ust be retained by the custom er and
is the only acceptable proof of purchase. It m ust be presented to the
authorized service centre at the tim e service is requested.
FM Signal to Noise Ratio
FM T.H.D
50dB
1%
FM Useable Sensitiivity
10dB
Exc lu s io n s
MPEG1/2/2.5 Layer3(8Kbps ~ 320Kbps, 8KHz ~ 48KHz)
WMA (64Kbps ~ 192Kbps, 32KHz, 44.1KHz, 48KHz)
File Support
This warranty does not cover dam age due to accident, fire flood and/or
other acts of God; m isuse, incorrect line voltage, im proper installation,
im proper or unauthorized repairs, com m ercial use, or dam age that occurs in
shipping. Exterior and interior finish, lam ps and glass are not covered under this
warranty. Custom er adjustm ents which are explained in the instruction m anual
are not covered under the term s of this warranty. This warranty will autom atical-
ly be voided for any unit found with a m issing or altered serial num ber. This war-
ranty is valid only on products purchased and used in Canada.
72
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMO
MEMO
Download from Www.Somanuals.com. All Manuals Search And Download.
|