Samsung MP3 Docking Station DA E670 User Guide

DA-E670

Wireless Audio with Dock

user manual

imagine the possibilities

Thank you for purchasing this Samsung product.

To receive more complete service,

please register your product at

www.samsung.com/register

Download from Www.Somanuals.com. All Manuals Search And Download.

safety information

safety Warnings

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The lighting flash and arrowhead within the

triangle indicates that there is dangerous

voltage Inside the product.

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE THE

COVER (OR BACK). NO USER SERVICEABLE

PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

The explanation point within the triangle

indicates that there are important instructions

accompanying the product.

WARNING

• To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.

CAUTION

• Do not expose this apparatus to dripping or splashing. Do not put objects filled with liquids, such as vases on the apparatus.

• To turn this apparatus off completely, you must pull the power plug out of the wall socket. Consequently, the power plug must be easily and readily

accessible at all times.

This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other equipment. To prevent

electromagnetic interference with electric appliances, such as radios and televisions, use shielded cables and connectors for connections.

FCC NOTE (for U.S.A):

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment to an outlet that is on a different circuit than the radio or TV.

• Consult the dealer or an experienced radio/TV technician for help.

Caution : FCC regulations state that any unauthorized changes or modifications to this equipment may void the user's authority to operate it.

Important Safety Instructions

Read these operating instructions carefully before using the unit. Follow all the safety instructions listed below. Keep these operating instructions handy for

future reference.

1) Read these instructions.

2) Keep these Instructions.

3) Heed all warnings.

10) Protect the power cord from being walked on or pinched

particularly at plugs, convenience receptacles, and the point where

they exit from the apparatus.

11) Only use attachment/accessories

specified by the manufacturer.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings. Install in

accordance with the manufacturer's instructions.

8) Do not install near any heat sources such as

radiators, heat registers, stoves, or other apparatus (including

amplifiers) that produce heat.

12) Use only with the cart, stand, tripod,

bracket, or table specified by the

manufacturer, or sold with the apparatus.

When a cart is used, use caution when

moving the cart/apparatus combination

to avoid injury from tip-over.

13) Unplug this apparatus during lightning storms or when unused for

long periods of time.

9) Do not defeat the safety purpose of the polarized or grounding-type

plug. A polarized plug has two blades with one wider than the other.

A grounding type plug has two blades and a third grounding prong.

The wide blade or the third prong are provided for your safety. If the

provided plug does not fit into your outlet, consult an electrician for

replacement of the obsolete outlet.

14) Refer all servicing to qualified service personnel. Servicing is

required when the apparatus has been damaged in any way, such

as power-supply cord or plug is damaged, liquid has been spilled

or objects have fallen into the apparatus, the apparatus has been

exposed to rain or moisture, does not operate normally, or has

been dropped.

CALIFORNIA USA ONLY

This perchlorate warning applies only to primary CR ( Manganese Dioxide ) Lithium coin cells in the product sold or

distributed ONLY in California USA

" Perchlorate Material - special handling may apply,

See www.dtsc.ca.gov/hazardouswaste/perchlorate. "

Download from Www.Somanuals.com. All Manuals Search And Download.

PrecaUtions

2.7 inch

3.9 inch

Ensure that the AC power supply in your house complies with the power requirements listed on the identification sticker located on the

back of your product. Install your product horizontally, on a suitable base (furniture), with enough space around it for ventilation (3~4

inches). Make sure the ventilation slots are not covered. Do not place the unit on amplifiers or other equipment which may become hot.

This unit is designed for continuous use. To fully turn off the unit, disconnect the AC plug from the wall outlet. Unplug the unit if you intend

to leave it unused for a long period of time.

During thunderstorms, disconnect the AC plug from the

wall outlet. Voltage peaks due to lightning could damage the unit.

Do not expose the unit to direct sunlight or other heat sources.

This could cause the unit to overheat and malfunction.

Phones

The batteries used with this product contain chemicals that are harmful to

the environment.

Do not dispose of batteries in the general household trash.

Protect the product from moisture (i.e. vases) , and excess heat

(e.g.fireplaces) or equipment creating strong magnetic or electric fields

Disconnect the power cable from the AC supply if the unit malfunctions.

Your product is not intended for industrial use. This product is for

personal use only.

Condensation may occur if your product has been stored in cold temper-

atures. If transporting the unit during the winter, wait approximately 2 hours

until the unit has reached room temperature before using.

Download from Www.Somanuals.com. All Manuals Search And Download.

contents

Features

License

^FeAtU2^ReS

Safety warnings

Precautions

SAFetY INFORmAtION

Before reading the user’s manual

What’s included

^{gettINg StAR}6^teD

Top/Front/Rear Panel

DeSCRIPtIONS

Tour of the remote control

RemOte CONtROL

10 Turning the Power on/off

10 Adjusting the volume

POweR ON AND vOLUme

CONtROL

11 Installing the Toroidal ferrite on the Power

cable

12 Using the Spacer Cover

13 Connecting a device to the Dual Dock

14 Connecting an audio device using AUX IN

15 Connecting to your Network

CONNeCtIONS

21 Connecting to Bluetooth devices

23 Using the TV mode (SoundShare)

23 Using the docking mode with Samsung

Galaxy and Apple Devices

PLAYINg

25 Using the Bluetooth mode

26 Using the USB mode

27 Using AirPlay and AllShare Play mode

28 Basic functions

29 Advanced functions

FUNCtIONS

30 Software upgrade (only USB mode)

31 Troubleshooting

32 Specifications

^tROUBLeSH3^OOt1^INg

APPeNDIX

Download from Www.Somanuals.com. All Manuals Search And Download.

getting started

Before reading the User’s ManUaL

Note the following terms before reading the user manual.

icons used in this manual

icon

term

definition

Indicates a situation where a function does not operate or settings may be

canceled.

caution

note

Indicates tips or instructions on the page that help a function operate.

safety instructions and troubleshooting

1) Familiarize yourself with the Safety Instructions before using this product. (See page 3)

2) If a problem occurs, check Troubleshooting. (See page 31)

written permission of Samsung Electronics Co.,Ltd.

What’s incLUded

Check for the supplied accessories shown below.

FUNCTION

MUTE

VOL

BASS

remote control / Lithium Battery (3V)

dc adapter

Power cable

audio cable

(AH59-02482A/4301-000108)

(BN44-00461A)

(3903-000598)

(BN39-01286A)

(Large)

(For Power Cable 1EA)

spacer cover/

Protection cover

(AH63-02996A/

AH63-03008A)

ferrite core

(3301-000144)

Lan cable

(GL39-00050A)

cloth

(BN63-02368B)

User Manual

(AH68-02481M)

▪

The appearance of the accessories may differ slightly from the illustrations above.

Download from Www.Somanuals.com. All Manuals Search And Download.

descriptions

toP/front/rear PaneL

<toP>

DOCK

<front>

<rear>

PUSH

LAN

DC 14V 4A WPS/

RESET

AUX IN

ONLY FOR

SERVICE

USB 5V 500mA

LAN

ONLY FOR

SERVICE

DC 14V 4A WPS/

RESET

AUX IN

USB 5V 500mA

Download from Www.Somanuals.com. All Manuals Search And Download.

PLay/PaUse

BUtton

Play or pause a music file.

fUnction

BUtton

Switches the mode as follows :

;

; aUX (Led off)

VoLUMe +/-

BUtton

Controls the volume level.

When you change the mode with the Function button, the icon of the

selected mode is displayed in white on the Function Display.

fUnction

disPLay

The LED blinks when you turn the power on and stops blinking when

the unit is on and ready to play.

Provides a 5 pin dock for Samsung Galaxy devices and a 30 pin dock

for Apple devices.

dUaL docK

Lan terMinaL

dc 14V

Lets you connect to a network using a LAN cable.

Connect the unit's DC adapter to this jack.

WPs/reset

BUtton

Used in procedures for connecting the unit to wireless networks.

Connect an external USB storage device such as an MP3 player here

to play files located on the device.

UsB Port

aUX in

Connect to the Analog output of an external device.

This jack is for service only.

onLy for

serVice

▪

When you turn on this unit, there will be a 4 to 5 second delay before it produces sound.

To update the product’s software via USB port, it is required to use a USB memory device.

▪

This unit can connect to mobile devices with high audio output levels. When you connect this

unit to external devices with high output levels, it may lower the audio output to protect the amp

and speakers.

When disconnecting the power cable from the wall outlet, hold the plug.

Do not pull the cable.

Download from Www.Somanuals.com. All Manuals Search And Download.

remote control

toUr of the reMote controL

POweR BUttON

FUNCtION BUttON

FUNCTION

Turns the unit on and off.

Selects the Function mode.

PLAY/PAUSe BUttON

Play or pause a music file.

CONtROL BUttON

Search for the next or previous

music file.

MUTE

BASS

mUte BUttON

Mutes the sound from this unit.

Press again to restore the sound

to the previous volume level.

VOL

vOLUme

Adjusts the volume level of the unit.

BASS BUttON

Optimize the sound based on

your tastes.

Installing battery in the Remote Control

1. Open the cover of the remote

control by putting your fingernail

into the gap between the cover

and body of the remote control.

Then, lift the cover and separate

it completely.

Install a 3V Lithium battery.

Fit the remote control's cover to the

Insert the battery into the battery

compartment with the + side facing

up.

remote control. Next, lower the cover so

that it is flush with the body of the remote,

and then press the cover into the body by

pushing the edges down with your hand.

▪

Be careful not to catch your fingernail in the gap when you lift the cover. You can damage

your fingernail.

Operation Range of the Remote Control

You can use the remote control up to 23 feet (7 meters) in a straight line from the unit. You can also operate the

remote at a horizontal angle of up to 30° from the remote control sensor.

Download from Www.Somanuals.com. All Manuals Search And Download.

power on and volume control

tUrning the PoWer on/off

DOCK

FUNCTION

MUTE

VOL

BASS

MUTE

1. To turn on this unit, press any button on the unit's top panel when the unit is in Standby mode.

or,

Press POweR on the remote control.

2. To turn off this unit, press the +# button on the unit's top panel for more than 3 seconds.

or,

Press POweR on the remote control again.

adJUsting the VoLUMe

Use +,- buttons to adjust the volume. The function LEDs light from left to right when you turn the volume up and

from right to left when you turn the volume down. The LEDs do not light if you try to increase the volume when it has

already been set to maximum or try to decrease the volume when it has already been set to minimum.

DOCK

FUNCTION

MUTE

VOL

BASS

VOL

BASS

Press the +/– button on the right side of the top panel.

or,

Press vOL +/– on the remote control.

▪

The volume level increases or decreases when you press VOL +/–.

You can also use the volume controls of devices connected using the Dual Dock or Bluetooth to control

the volume. However, your ability to control the volume using the volume controls of devices connected

using Bluetooth may be limited.

Download from Www.Somanuals.com. All Manuals Search And Download.

connections

instaLLing the toroidaL ferrite on the PoWer caBLe

Lift up to release the lock and open the core.

Close the lock back.

Wind Power cable around the core three times.

(Start winding at 2-4 inches away from the plugs)

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the sPacer coVer

Attach the space cover if you want to dock a Samsung Galaxy or Apple device having no protective case onto the

Dual Dock.

- Use it for stable installation of your device considering the shape of the device.

The Dual Dock also comes with a protective cover for the 30-pin Apple device connector. Use the protective cover

for the 30-pin connector when you attach the 5-pin Samsung Galaxy device.

See the illustrations below for additional instructions.

When docking a device, use appropriate support considering the docking device’s protective case

or the device’s shape for further stability.

Protective Cover

Used for docking devices having no protective case on it.

Protective Cover

Spacer Cover

▪

It is impossible to attach a device to the Dual Dock that has a case thicker than 1.5 mm or an unusual

rounded bottom.

Download from Www.Somanuals.com. All Manuals Search And Download.

connecting a deVice to the dUaL docK

How to connect a device to the Dual Dock.

PUSH

PUS

FOR

ONL

SER

VICE

FOR

UX IN

ONL

SER

VICE

UX IN

PS/

ESE

WPS/

RESE

USB 5V 500mA

1. The DUAL DOCK is located on the back of the product. To open, push it in gently.

2. Press the button on the top panel of the Wireless Audio with Dock repeatedly until the icon appears in the

display.

• Each time you press the button, the selection changes as follows :

;

; aUX (Led off)

• The selected mode is displayed in white in the Function Display.

3. If you have a Samsung Galaxy device, connect the device to the 5 pin (smaller) connector to connect to the Dual

Dock. If you have a Apple device, connect the device to the 30 pin (larger) connector on the Dual Dock.

4. Lift the device support up as shown to prevent the device from sliding or falling off the Dual Dock.

▪

Turn on your Samsung Galaxy device before you attach it to the Dual Dock.

This unit doesn't support the simultaneous docking of Samsung Galaxy and Apple devices.

Connect your Samsung Galaxy or Apple device to the Dual Dock before starting Docking mode.

(See page 23)

Download from Www.Somanuals.com. All Manuals Search And Download.

connecting an aUdio deVice Using aUX in

This section explains how to connect the unit to an audio device.

This unit is equipped with one audio analog jack for connecting an audio device.

PUSH

LAN

DC 14V 4A WPS/

RESET

AUX IN

ONLY FOR

SERVICE

USB 5V 500mA

LAN

ONLY FOR

SERVICE

DC 14V 4A WPS/

RESET

AUX IN

USB 5V 500mA

AUX IN

audio cable

Earphones

jack

external device

AUX IN

1. Connect AUX IN (Audio) on the back of the unit to the earphone jack of the external device or audio device.

2. Press the button repeatedly until the function LEDs are off.

• The AUX mode is active when no function LED is lit.

▪

Before moving or installing this product, be sure to turn off the power and disconnect the power cord.

Download from Www.Somanuals.com. All Manuals Search And Download.

connecting to yoUr netWorK

You can connect your Wireless Audio with Dock to your network router using one of the methods illustrated on the

next few pages.

to connect the wireless Audio with Dock to a wired Network

PUSH

LAN

DC 14V 4A WPS/

RESET

AUX IN

SERVICE

USB 5V 500mA

Broadband modem

(with integrated router)

router

Broadband

service

Broadband

service

Broadband

modem

Please turn off the power of the wireless Audio with Dock before you connect the LAN Cable.

1. Turn off the Wireless Audio with Dock.

2. Connect the Wireless Audio with Dock to the router using a LAN cable.

3. Turn on the Wireless Audio with Dock.

4. Press the button on the top panel of the Wireless Audio with Dock repeatedly until the

icon

appears in the display.

• Each time you press the button, the selection changes as follows :

;

; aUX (Led off)

indicator lights up in red, and changes to solid white once the Wireless Audio with Dock

connects to the router.

5. The

▪

If you connected the LAN cable when the product is on, turn the product off, then turn it on again.

If failed to connect to the network, unplug the LAN cable and connect it again, and restart the product.

xDSL user needs a router to make a network connection.

Download from Www.Somanuals.com. All Manuals Search And Download.

to connect the wireless Audio with Dock to a wireless Network

This section describes 4 methods of connecting the Wireless Audio with Dock to a wireless network.

▪

Some of network related operations may be different than explained depending on performance and

supported functions of used AP.

To configure the network connection to your router or modem, see the router or modem's user manual.

▪ The Wireless Audio with Dock supports the following security protocols:

WEP ; Open

WPA-PSK ; TKIP

WPA2-PSK ; AES

▪ You can also connect the Wireless Audio with Dock to a network that does not have security and has

no password.

▪ If your wireless router supports DHCP, this Wireless Audio with Dock can use a DHCP or static IP

address to connect to the wireless network.

▪ Select a channel on the wireless router that is not currently being used, if the channel set for the

wireless router is currently being used by another device nearby, it will result in interference and

communication failure.

▪ If you select the Pure High-throughput (Greenfield) 802.11n mode and set the encryption type on

your router to WEP or TKIP, then the Wireless Audio with Dock will not support a connection in

compliance with new Wi-Fi certification specifications.

▪ Wireless LAN, by its nature, may cause interference, depending on the operating conditions (router

performance, distance, obstacles, interference with other radio devices, etc)

▪ WPS(PBC) / WPS(PIN) does not operate when the security protocol is set to WEP.

▪ If you fail to set up the network, press and hold the wPS/ReSet button on the rear panel until the

indicator blinks twice. Wait until the red light stops blinking, turn off and on the unit.

And try again.

to connect the wireless Audio with Dock to your Apple device

having iOS 5.0 or above (Info Sharing)

This network set-up method is for users of Apple devices that have iOS 5.0 or later.

1. Connect the Apple device to your network.

2. Select

on the Wireless Audio with Dock, and then connect the iPod /iPhone /iPad device to the

Dual Dock.

3. Press and hold the wPS/ReSet button on the rear panel of the Wireless Audio with Dock with a pen

tip or similar item for more than 1 second. The icon will blink once. Release the buttom.

4. Select <Allow> in the pop-up menu on the display of the Apple device.

5. Change the mode to the

and then the indicator will blink in red and changes to solid white. After

the Wireless Audio with Dock connects, the indicator stops blinking in red, and glows in white.

• The network connection is complete.

Download from Www.Somanuals.com. All Manuals Search And Download.

to connect the wireless Audio with Dock using wPS (PBC)

1. Press the button on the top panel of the Wireless Audio with

Dock repeatedly until the

icon appears in the display.

• Each time you press the button, the selection changes as

PUSH

follows :

LAN

DC 14V 4A WPS/

RESET

AUX IN

ONLY FOR

SERVICE

;

; aUX (Led off)

USB 5V 500mA

The indicator changes from white to red and blinks.

2. Press and hold the wPS/ReSet button on the rear panel with a

pen tip or similar item for more than 1 second. The indicator

blinks once in white. After the indicator blinks, release the

button.

LAN

WPS/

RESET

AUX IN

USB 5V 500mA

• The indicator blinks in red.

3. Push the wPS/ReSet button on your router or modem within

90 seconds.

4. After the Wireless Audio with Dock connects, the

indicator changes from blinking red to white.

• The network connection is complete.

Download from Www.Somanuals.com. All Manuals Search And Download.

to connect the wireless Audio with Dock through a JBC (JukeBox

Connect) Connection

1. Press the button on the top panel of the Wireless Audio with Dock repeatedly until the

icon appears in the display.

• Each time you press the button, the selection changes as follows :

;

; aUX (Led off)

The indicator changes from white to red and blinks.

2. Press and hold the wPS/ReSet button on the back panel with a pen tip or similar item for more

than 5 seconds. The indicator blinks in white once. Wait until the indicator blinks in white twice

more, and then release the wPS/ReSet button.

• The indicator blinks in red, and then stops blinking and glows in red when the unit accesses the

Network Setting mode.

3. To connect the Wireless Audio with Dock to the network, search for "Samsung w_Audio e670

XXXXXXX" in the Wi-Fi Setting list of your WI-Fi device, and then select it.

ex) Samsung Galaxy Device

4. Open the web browser of the Wi-Fi device, and then type

"http://192.168.1.1" into the address bar of the Internet browser

to access the Wireless Audio with Dock's web page.

5. In the "Service Set ID (SSID)" field, select the AP device (router

or modem) your Wi-Fi device is connected to.

6. Type the AP device's password into the "wPA Passphrase

filed. If you want to set the static IP, press advanced settings. Fill

in the desired static IP address.

7. Press <Apply>.

If a warning appears on your Wi-Fi device, click OK.

8. When the connection between the Wireless Audio with Dock and

AP you selected is completed, the indicator on the Wireless

Audio with Dock changes to white.

• The Wireless Audio with Dock connection is complete.

 The picture above is the screen which will appear on the display after

completing the network connection successfully, so you can run AirPlay

or DLNA normally.

Download from Www.Somanuals.com. All Manuals Search And Download.

to connect the wireless Audio with Dock using a wPS PIN

1. Press the button on the top panel of the Wireless Audio with Dock repeatedly until the

icon appears in the display.

• Each time you press the button, the selection changes as follows :

;

; aUX (Led off)

The indicator changes from white to red and blinks.

2. Press and hold the wPS/ReSet button on the back panel with a pen tip or similar item for more

than 5 seconds. The indicator blinks in white once. Wait until the indicator blinks in white twice

more, and then release the wPS/ReSet button.

• The icon blinks in red, and then stops blinking and glows in red when the unit accesses the

Network Setting mode.

3. To connect the Wireless Audio with Dock to the network, search for "Samsung w_Audio e670

XXXXXXX" in the Wi-Fi Setting list of your WI-Fi device, and then select it.

ex) Samsung Galaxy Device

4. Open the web browser of the Wi-Fi device, and then type "http://192.168.1.1" into the address bar

of the Internet browser.

5. Press or touch Samsung Wireless Audio with Dock Status.

6. The wPS PIN number appears on the bottom of the

screen. Note or write down the number, and then turn the

Wireless Audio with Dock unit off and then on.

7. Access the Wi-Fi set-up page of your AP (wireless router or

modem) using your PC or other Internet ready device, and

then set the Wi-Fi settings to the PIN method. Refer to the

user's manual of your router or modem for instructions.

8. Type the Wireless Audio with Dock's WPS PIN number into

the appropriate field of the Wi-Fi setup page.

9. Press and hold the wPS/ReSet button on the back panel

of the Wireless Audio with Dock with a pen tip or similar item for more than 10 seconds in the

mode. The indicator blinks once in white, and then twice. Wait until the indicator blinks three

times, and then release the button.

• The icon blinks in red.

10. If the connection between the Wireless Audio with Dock and the AP is completed within 90

seconds, the indicator changes from red to white.

• The Wireless Audio with Dock connection is complete.

▪

The Wi-Fi Direct function is not supported by this product.

Direct connection may succeed in some cases, but it is not supported function by this

product.

Download from Www.Somanuals.com. All Manuals Search And Download.

BLUetooth

You can connect the Wireless Audio with Dock to Bluetooth devices and enjoy music with high quality stereo

sound, all without wires!

what is Bluetooth?

Bluetooth technology lets Bluetooth-compliant devices interconnect easily with each other using a short

wireless connection.

• A Bluetooth device may cause noise or malfunction, depending on usage, when:

- A part of your body is in contact with the receiving/transmitting system of the Bluetooth device or

the Wireless Audio with Dock.

- It is subject to electrical variation from obstructions caused by a wall, corner, or by office partitioning.

- It is exposed to electrical interference from same frequency-band devices including medical

equipment, microwave ovens, and wireless LANs.

• Keep the Wireless Audio with Dock and the Bluetooth device close together when pairing.

• The further the distance between the Wireless Audio with Dock and Bluetooth device, the worse the

quality. If the distance exceeds the Bluetooth operational range, the connection is lost.

• In poor reception-sensitivity areas, the Bluetooth connection may not work properly.

• The Bluetooth connection only works when the Bluetooth device is close to the set. The connection is

automatically cut off if the Bluetooth device moves out of range. Even within range, the sound quality

may be degraded by obstacles such as walls or doors.

• This wireless device may cause electric interference during its operation.

▪

You may be required to enter a PIN code (password) when connecting the Bluetooth device to

the Wireless Audio with Dock. If the PIN code input window appears, enter <0000>.

▪

The Wireless Audio with Dock supports SBC data (44.1kHz, 48kHz).

The AVRCP feature is not supported.

Connect only to a Bluetooth device that supports the A2DP (AV) function.

You cannot connect to a Bluetooth device that supports only the HF (Hands Free) function.

Only one Bluetooth device can be paired at a time.

Once you have turned off the Wireless Audio with Dock and the pairing is disconnected, the

pairing will not be restored automatically. To reconnect, you must pair the devices again.

▪

The Wireless Audio with Dock may not search or connect properly in the following cases:

If there is a strong electrical field around the Wireless Audio with Dock.

If several Bluetooth devices are simultaneously paired to the Wireless Audio with Dock.

If the Bluetooth device is turned off, not in place, or malfunctions

Note that such devices as microwave ovens, wireless LAN adaptors, fluorescent lights, and

gas stoves use the same frequency range as the Bluetooth device, which can cause electric

interference.

Download from Www.Somanuals.com. All Manuals Search And Download.

connecting to BLUetooth deVices

This section explains how to connect the Wireless Audio with Dock to Bluetooth compatible TVs and other

Bluetooth devices.

to connect the wireless Audio with Dock to a Bluetooth compatible 2012

Samsung tv (SoundShare)

DOCK

connect

To produce TV sound on your Wireless Audio with Dock via Bluetooth connection, you need to pair your system to

the Bluetooth compliant TV first. Once the pairing is established, the pairing information is recorded and kept and no

further Bluetooth connection message will appear from the next time. Keep the Wireless Audio with Dock and the

TV close together before pairing. (It is recommended to pair devices within 3.3 feet.)

1. Turn on the Samsung TV and Wireless Audio with Dock.

• Set "Add New Device" menu to "On" in the TV. (For more information, refer to the user's guide of TV)

Menu ; System ; Device Manager ; SoundShare Settings ; Add New Device.

2. When you change the mode of Wireless Audio with Dock to

, a message asking whether to proceed with

Bluetooth pairing appears. Select <Yes> on the TV screen, then the pairing with the Wireless Audio with Dock

will be completed.

• The

indicator blinks, and stops blinking.

• The Wireless Audio with Dock Bluetooth pairing is complete.

If you want to pair your Wireless Audio with Dock to a TV other than the connected TV, you should cancel the

existing pairing in the Wireless Audio with Dock. It is possible to cancel the pairing in the way below.

The

. This unit will automatically pair to a TV once you cancel the existing pairing and the new TV is ready for

connection.

LED will blink once when you press the wPS/ReSet button on the rear panel of the unit for 1 second in

▪

If the TV cannot be connected, please try to reconnect it after pressing the WPS/RESET button on the

rear panel of the set in the Bluetooth mode.

You should update TV software to the latest version to operate TV pairing (SoundShare) function.

▪

Check the instructions for updating and applicable models from the support page on website

(http://www.samsung.com) or contact the call center.

Download from Www.Somanuals.com. All Manuals Search And Download.

to connect the wireless Audio with Dock to a Bluetooth device

Before you begin, confirm that your Bluetooth device supports the Bluetooth compliant stereo headset function.

DOCK

connect

external device

1. Press the button on the top panel of the Wireless Audio with Dock repeatedly until the icon appears in the

display.

• Each time you press the button, the selection changes as follows :

;

; aUX (Led off)

• The selected mode is displayed in white in the Function Display.

2. Select the Bluetooth menu on your Bluetooth device.

(Refer to the Bluetooth device's user manual for instructions.)

3. Scan or search for All Devices or for Headsets.

• You will see a list of devices.

4. Select "[Samsung]w_Audio XXXXXX" from the searched list.

• If the Bluetooth device fails to pair with the Wireless Audio with Dock, delete the "[Samsung]W_Audio XXXXXX"

found by the Bluetooth device, and search for the Wireless Audio with Dock again, and then repeat Steps 2, 3,

and 4.

Download from Www.Somanuals.com. All Manuals Search And Download.

playing

Using the tV Mode (soundshare)

Press the button to select the

mode, and then connect the TV to the Wireless Audio

with Dock. (See page 21)

• The unit will play the TV's audio when it is connected to the TV.

• If you change the Wireless Audio with Dock's Bluetooth input source or turn it off, you will

hear audio from the TV again.

▪

You can control the volume only with the Wireless Audio with Dock.

Using the docKing Mode With saMsUng gaLaXy and aPPLe

deVices

Press the button to select the

Dock. (See page 13)

mode, and then connect the Samsung Galaxy or Apple device to the Dual

To use your Samsung Galaxy series device with the Dual Dock, you must download and

install the Docking Mode application from the Android Market on the device. To download,

follow these steps:

1. Tap the Play Store (Android Market) icon on the Samsung Galaxy device's main screen.

2. Tap the search icon on the screen to access the search bar.

3. In the search bar, type in the [Samsung wireless Audio Dock], and then search.

4. In the search result list, find, and then tap [Samsung wireless Audio

Dock] to start downloading.

5. Tap [install].

To play music, follow these steps:

-1

.If you start the app when the Wireless Audio with Dock is the only device

for the Bluetooth connection,

selecting PLAY in your device automatically establishes the Bluetooth

connection to the Wireless Audio with Dock and the unit plays music.

-2

.If there are multiple devices for Bluetooth connection including Wireless

Audio with Dock,

1) When you start the app, the list of the devices which you can connect to

the Wireless Audio with Dock will appear.

2) Play music after connecting to the Wireless Audio with Dock by

selecting it on the list of devices.

If there exists a Bluetooth device paired to the Wireless Audio with

Dock before, it will not appear in the list and be connected

automatically.

2. If you replace the Wireless Audio with Dock which you have paired to your mobile device, you should delete

the remaining settings saved in your device before pairing to the new one.

•

; [Clear data].

Download from Www.Somanuals.com. All Manuals Search And Download.

▪

Once you started the application, running is not disturbed by charging your mobile device with an

ordinary charger.

When you connect other device to the Wireless Audio with Dock after connecting Samsung Galaxy

device in docking mode, you may have to turn off the Bluetooth mode of the Samsung Galaxy device.

If you have trouble connecting the Samsung Galaxy device to the Dual Dock, turn off the devices's

Bluetooth mode.

1. Select the mode as described above, and then connect the Apple device to the Dual Dock as described in

Connecting a Device to the Dual Dock (Page 13). You will hear a ringing sound.

2. Select the <music> menu in the main screen of the Apple device.

3. Select and play the desired music.

• The music will play through the Wireless Audio with Dock's speakers.

▪ While playing a video with your device, Play/Pause/Next/Back operations may not be available.

Use the button on your source device to operate it.

Compatibility list (Apple Device)

Docking mode compatible iPod/iPhone/iPad models

Update the software of your iPod/iPhone/iPad to the latest version before using it with this unit.

iPod touch (4th generation)

iPod touch (3rd generation)

iPod nano (6th generation)

iPod nano (5th generation)

iPhone 4S

iPhone 4

iPhone 3GS

iPad 2

iPad

• Depending on its version of iPod Software, your device may not be compatible or may operate

abnormally.

 If you connect an incompatible Apple device, the iPod Function LED will blink.

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the BLUetooth Mode

Press the button to select the mode, and then connect the Bluetooth device to the

Wireless Audio with Dock. (See page 22)

To connect your Bluetooth device when the Wireless Audio with Dock is in Bluetooth mode,

search for the Wireless Audio with Dock on the device's Bluetooth list. Select the Wireless

Audio with Dock, and then connect. Once the Wireless Audio with Dock has connected,

select and play the desired music.

The music will play through the Wireless Audio with Dock's speakers.

▪ If you want to change the device which is connected through Bluetooth mode to other device,

disconnect the existing device and try to connect to the other device which you want to use.

▪ While in Bluetooth communication, Play/Pause/Next/Back operations may not be available

depending on used mobile device and application.

▪ Operating Bluetooth device paired to the Wireless Audio with Dock may cause stuttering if operated

while the Wireless Audio with Dock is playing back from AUX input.

to disconnect the Bluetooth device from the wireless Audio with

Dock

You can cancel Bluetooth pairing from the Wireless Audio with Dock. For instructions, see the Bluetooth

device's user manual.

• The Wireless Audio with Dock will be disconnected.

to disconnect the wireless Audio with Dock from the Bluetooth

device

Press the button on the top panel of the Wireless Audio with Dock to switch from to another mode

or press the Power button on the remote to turn the Wireless Audio with Dock off.

• The currently connected device will be disconnected.

▪

The Bluetooth connection only works when the Bluetooth device is close to the set. The

connection is automatically cut off if the Bluetooth device moves out of range. Even within

range, the sound quality may be degraded by obstacles such as walls or doors.

If the Bluetooth device comes back into the effective range, you can restart to restore the

pairing with the Bluetooth device.

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the UsB Mode

1. Connect the USB device to the USB port on the back of the unit.

2. Press the button on the top panel of the Wireless Audio with Dock repeatedly until

the

• Each time you press the button, the selection changes as follows :

; aUX (Led off)

icon appears in the display.

;

• The selected mode is displayed in white in the Function Display.

Before you connect a USB device

Read the list below to check compatibility.

• This product may not be compatible with certain types of USB storage media.

• The FAT16 and FAT32 file systems are supported.

- The NTFS file system is not supported.

PUSH

• Connect a USB device directly to the USB port of the product.

Otherwise, you may encounter a USB compatibility problem.

LAN

DC 14V 4A WPS/

RESET

AUX IN

ONLY FOR

SERVICE

USB 5V 500mA

• Do not connect multiple storage devices to the product via a

multi-card reader. It may not operate properly.

• Digital camera PTP protocols are not supported.

LAN

• Do not remove the USB device while it is being read.

WPS/

RESET

AUX IN

• DRM-protected music files (MP3, WMA) from a commercial web

site can not be played.

USB 5V 500mA

• External HDDs are not supported.

• Compatibility list

format

Music

file name

MP3

WMA

file extension

.MP3

.WMA

80~320

kbps

56~128

kbps

Bit rate

Version

sampling frequency

44.1KHz

 Do not connect your mobile device to the USB port and the Docking station at the same time for

recharging.

Download from Www.Somanuals.com. All Manuals Search And Download.

Using airPLay and aLLshare PLay Mode

to use the

function, the wireless Audio with Dock and the device which you are trying to

connect must be connected to the same AP.

airPlay mode

1. Play the desired music in the <music> menu on main screen of the Apple device.

2. Select "Samsung w_Audio e670 XXXXXXX" by pressing the

icon on the screen of

the Apple device.

• The music will play through the Wireless Audio with Dock's speakers.

 When you succeed the connection between iTunes and the Wireless Audio with Dock through same IP once, the

mode will be switched automatically to AirPlay mode when you select the Wireless Audio with Dock and play

musics in iTunes in a mode other than the AirPlay mode.

▪ It takes 3~5 seconds to respond for the set from your remote control operation.

allshare Play mode

1. Select the menu on the main screen of the Galaxy device.

2. After going into [Audio] in AllShare Play, select the desired music.

3. When the <Select device> pop-up appears, select "Samsung w_Audio e670

XXXXXXX".

• The music will play through the Wireless Audio with Dock's speakers.

▪ The control function may not be supported by your device depending on the functions of the

application and the Audio Dock of your device.

Download from Www.Somanuals.com. All Manuals Search And Download.

functions

Basic fUnctions

DOCK

Using the input mode

You can select the following inputs:

;

; aUX

(Led off).

Press an appropriate button on the remote control to select a desired mode,

or press to select from:

;

; aUX (Led off).

input mode

tV mode

display

docking mode

BLUetooth mode

UsB mode

FUNCTION

airPlay mode

allshare Play mode

aUX input

MUTE

VOL

BASS

MUTE

LED Off

Download from Www.Somanuals.com. All Manuals Search And Download.

adVanced fUnctions

Play/Pause

FUNCTION

During playback, press the +# button.

MUTE

BASS

VOL

MUTE

VOL

• Press the +# button to stop playing the file temporarily.

Press the +# button again to play the selected file.

▪ This function may not operate in certain mode.

Skip Forward/Back

FUNCTION

During playback, press the [,] button.

MUTE

BASS

VOL

MUTE

VOL

• When there is more than one file and you press the ] button, the next file

is selected.

• When there is more than one file and you press the [ button, the

previous file is selected.

▪ This function may not operate in certain mode.

muting the sound

FUNCTION

This is useful when answering a doorbell or telephone call.

MUTE

BASS

MUTE

VOL

1. To mute sound of this unit, press the mUte (

) button of the remote

control.

2. Press mUte (

) on the remote control again (or press vOLUme +/-) to

restore the sound.

Using the BASS function

FUNCTION

Lets you optimize the bass sound according to your tastes.

MUTE

BASS

MUTE

BASS

VOL

Press BASS on the remote control of this unit.

VOL

• Each time the button is pressed, the selection changes as follows :

BASS ON ; OFF

Download from Www.Somanuals.com. All Manuals Search And Download.

softWare UPgrade (onLy UsB Mode)

1. Visit www.samsung.com.

2. Click SUPPORt on the top right of the page.

PUSH

3. Enter the product's model number into the search field, and then click Find

LAN

Product.

DC 14V 4A WPS/

RESET

AUX IN

ONLY FOR

SERVICE

USB 5V 500mA

4. Click get downloads in the Center of the page below the Downloads

header.

LAN

5. Click Firmware in the Center of the page.

WPS/

RESET

AUX IN

6. Click ZIP file icon of the upgrade file.

7. Once popup window appears, click OK and continue to download and save

USB 5V 500mA

upgrade file onto your PC.

8. Uncompress downloaded .zip file into a certain folder of your PC.

9. Copy all files in the folder to the USB flash drive’s root directory.

• Upgrading allows only one file set for upgrading at a time.

10. Press the button on the top panel of the Wireless Audio with Dock

repeatedly until the

icon appears in the display. Insert the USB drive into

the USB port on the back panel of the unit.

11. The LED will blink during the Software update process. The product will turn off automatically after completing

the firmware upgrade.

• It may take longer depending on the functions to upgrade. (Maximum 10 minutes)

• Turn on the product again.

▪

Do not disconnect the power or remove the USB drive while an upgrade is being applied. The main unit

will turn off automatically after completing the firmware upgrade.

When software is upgraded, settings you have made will return to their default (factory) settings.

We recommend you write down your settings so that you can easily reset them after the upgrade.

If the firmware fails to upgrade, we recommend formatting the USB drive in the FAT16 format and then

trying again.

▪

For upgrading purposes, do not format the USB drive in NTFS format. It is not a supported file system.

Depending on the manufacturer, the USB may not be supported.

Disconnect the Wireless Audio with Dock from the Internet and any external devices before you upgrade

the software.

▪

You cannot charge other external devices through this USB port.

Refer to the Upgrade Guide from the website.

Download from Www.Somanuals.com. All Manuals Search And Download.

troubleshooting

Before requesting service, please check the following.

symptom

check

remedy

the unit will not turn on.

• Is the power cord plugged

• Connect the power plug to

into the outlet?

the outlet.

a function does not work when

• Has the Wireless Audio with • Disconnect the power plug

the button is pressed.

Dock or the remote been

and connect it again.

exposed to static electricity?

sound is not produced.

• Is the unit properly

• Connect it correctly.

connected to device?

• Press the Mute button to

• Is the Mute function on?

cancel the function.

• Is the volume set to

• Adjust the volume.

minimum?

the remote control does not

• Are the batteries drained?

• Replace with new batteries.

work.

• Is the distance between

remote control and main

unit too far?

• Operate closer to the main

unit.

Wi-fi network connection failed

• Check if your Wi-Fi router is • Make sure the Network

Wi-Fi certified.

Connection is set to

Wireless (General).

• Make sure the Wireless

Audio with Dock unit is

connected to a wireless IP

router or modem.

the soundshare (tV pairing)

failed.

• Is your TV a supporting

model?

• Check whether your TV is a

supporting model or not.

(http://www.samsung.com)

• Is your TV firmware the

latest version?

• Update your TV with the

latest firmware.

• Does an error occur in

connection?

• Reset the unit.

Press the WPS/RESET

button in the TV mode.

• Contact the call center.

Download from Www.Somanuals.com. All Manuals Search And Download.

appendix

sPecifications

DA-E670

Model name

Power supply

Power consumption

Weight

DC 14V 4A

29.8W

9.26 Ibs

generaL

Dimensions (W x D x H)

15.7 x 7.9 x 5.6 inches

Operating temperature range +41°F to +95°F

Operating humidity range

Rated output power

10 % to 75 %

40W, 4OHM, THD = 10%, 1kHz

800mV/56Kohm

Impedance

Input sensitivity/

aMPLifier

input)

S/N ratio (analog

Separation(1kHz)

65 dB

20Hz~20kHz( 3 dB)

Analog input

freQUency

resPonse

Digital input/48kHz PCM

iPad

5 V 2.0 A

5 V 1.0 A

docKing

rating

iPod

Galaxy

Type A

USB 1.1

500mA

UsB

DC output

Ethernet

100BASE-TX Terminal

Built-in

Wireless LAN

WEP (OPEN)

WPA-PSK (TKIP)

WPA2-PSK (AES)

netWorK

Security

WPS(PBC/PIN)

Supported

* S/N ratio, distortion, separation, and usable sensitivity are based on measurement using AES (Audio Engineering

Society) guidelines.

* Nominal specification

- Samsung Electronics Co., Ltd reserves the right to change the specifications without notice.

- Weight and dimensions are approximate.

- Network speeds equal to or below 10Mbps are not supported.

Download from Www.Somanuals.com. All Manuals Search And Download.

Warranty

LiMited Warranty to originaL PUrchaser

This SAMSUNG brand product, as supplied and distributed by Samsung Electronics America, Inc. (SAMSUNG) and delivered new,

in the original carton to the original consumer purchaser, is warranted by SAMSUNG against manufacturing defects in materials and

workmanship for a limited warranty period of:

one (1) year Parts and Labor*

(*90 days Parts and Labor for commercial Use)

This limited warranty begins on the original date of purchase, and is valid only on products purchased and used in the United States.

To receive warranty service, the purchaser must contact SAMSUNG for problem determination and service procedures. Warranty

service can only be performed by a SAMSUNG authorized service center. The original dated bill of sale must be presented upon

request as proof of purchase to SAMSUNG or SAMSUNG's authorized service center. Transportation of the product to and from

the service center is the responsibility of the purchaser.

SAMSUNG will repair or replace this product, at our option and at no charge as stipulated herein, with new or reconditioned parts

or products if found to be defective during the limited warranty period specified above. All replaced parts and products become

the property of SAMSUNG and must be returned to SAMSUNG. Replacement parts and products assume the remaining original

warranty, or ninety (90) days, whichever is longer.

SAMSUNG’s obligations with respect to software products distributed by SAMSUNG under the SAMSUNG brand name are set forth in the

applicable end user license agreement. Non-SAMSUNG hardware and software products, if provided, are on an “AS IS” basis.

Non-SAMSUNG manufacturers, suppliers, publishers, and service providers may provide their own warranties.

This limited warranty covers manufacturing defects in materials and workmanship encountered in normal, and except to the extent

otherwise expressly provided for in this statement, noncommercial use of this product, and shall not apply to the following, including,

but not limited to: damage which occurs in shipment; delivery and installation; applications and uses for which this product was not

intended; altered product or serial numbers; cosmetic damage or exterior finish; accidents, abuse, neglect, fire, water, lightning or

other acts of nature; use of products, equipment, systems, utilities, services, parts, supplies, accessories, applications, installations,

repairs, external wiring or connectors not supplied and authorized by SAMSUNG, or which damage this product or result in service

problems; incorrect electrical line voltage, fluctuations and surges; customer adjustments and failure to follow operating instructions,

cleaning, maintenance and environmental instructions that are covered and prescribed in the instruction book; product removal

or reinstallation; reception problems and distortion related to noise, echo, interference or other signal transmission and delivery

problems. SAMSUNG does not warrant uninterrupted or error-free operation of the product.

THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED AND DESCRIBED ABOVE, AND NO WARRANTIES

WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY

OR FITNESS FOR A PARTICULAR PURPOSE, SHALL APPLY AFTER THE EXPRESS WARRANTY PERIODS STATED ABOVE, AND

NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR CORPORATION WITH RESPECT TO

THIS PRODUCT SHALL BE BINDING ON SAMSUNG. SAMSUNG SHALL NOT BE LIABLE FOR LOSS OF REVENUE OR PROFITS,

FAILURE TO REALIZE SAVINGS OR OTHER BENEFITS, OR ANY OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES

CAUSED BY THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT, REGARDLESS OF THE LEGAL THEORY ON WHICH

THE CLAIM IS BASED, AND EVEN IF SAMSUNG HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOR SHALL

RECOVERY OF ANY KIND AGAINST SAMSUNG BE GREATER IN AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCT

SOLD BY SAMSUNG AND CAUSING THE ALLEGED DAMAGE. WITHOUT LIMITING THE FOREGOING, PURCHASER ASSUMES

ALL RISK AND LIABILITY FOR LOSS, DAMAGE OR INJURY TO PURCHASER AND PURCHASER’S PROPERTY AND TO OTHERS

AND THEIR PROPERTY ARISING OUT OF THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT SOLD BY SAMSUNG NOT

CAUSED DIRECTLY BY THE NEGLIGENCE OF SAMSUNG. THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER

THAN THE ORIGINAL PURCHASER OF THIS PRODUCT, IS NONTRANSFERABLE AND STATES YOUR EXCLUSIVE REMEDY.

Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential

damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also

have other rights which vary from state to state.

To obtain warranty hardware service, please contact SAMSUNG customer care center.

Download from Www.Somanuals.com. All Manuals Search And Download.

Open Source Announcement

To send inquiries and requests for questions regarding open sources, contact Samsung via Email

([email protected]).

• This product uses some software programs which are distributed under the Independent JPEG Group.

Redistribution and use in source and binary forms, with or without modification, are permitted provided

that the following conditions are met:

- Redistributions of source code must retain the above copyright notice, this list of conditions and the

following disclaimer.

- Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the

following disclaimer in the documentation and/or other materials provided with the distribution.

- Neither the name of the Xiph.org Foundation nor the names of its contributors may be used to endorse or

promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS''

AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.

IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,

INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED

TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;

OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER

IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN

ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH

DAMAGE.“