Samsung Home Theater System HTH5500 User Guide

HT-H5500W  
5.1CH Blu-ray™  
Home Entertainment System  
user manual  
imagine the possibilities  
Thank you for purchasing this Samsung product.  
To receive more complete service,  
please register your product at  
This Nanum Gothic Eco font is provided by NAVER.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Do not allow children to hang on the product.  
Connect this equipment to an outlet on a circuit that  
the receiver is not connected to.  
Store the accessories (battery, etc.) in a location safely  
out of the reach of children.  
Consult the dealer or an experienced radio/TV  
technician for help.  
Do not install the product in an unstable location such  
as a shaky self, a slanted floor, or a location exposed  
to vibration.  
This class B digital product meets all requirements  
of the Canadian Interference - Causing Equipment  
Regulations.  
Do not drop or strike the product. If the product is  
damaged, disconnect the power cord and contact a  
service center.  
CLASS 1 LASER pROdUCT  
This product is classified as a CLASS 1 LASER product.  
Use of controls, adjustments or performance of  
procedures other than those specified herein may result  
in hazardous radiation exposure.  
To clean this apparatus, unplug the power cord from  
the wall outlet and wipe the product using a soft,  
dry cloth. Do not use any chemicals such as wax,  
benzene, alcohol, thinners, insecticide, air fresheners,  
lubricants, or detergent. These chemicals can damage  
the appearance of the product or erase the printing  
on the product.  
Complies with 21CFR 1040.10 except for deviations  
pursuant to Laser Notice No. 50, dated June 24, 2007.  
dANGER :  
Do not expose this apparatus to dripping or splashing.  
Do not put objects filled with liquids, such as vases on  
the apparatus.  
VISIBLE AND INVISIBLE LASER RADIATION WHEN  
OPEN. AVOID DIRECT EXPOSURE TO BEAM.  
(FDA 21 CFR)  
Do not dispose of batteries in a fire.  
Do not plug multiple electric devices into the same  
wall socket. Overloading a socket can cause it to  
overheat, resulting in a fire.  
CAUTION :  
CLASS 3B VISIBLE AND INVISIBLE LASER RADIATION  
WHEN OPEN. AVOID EXPOSURE TO THE BEAM (IEC  
60825-1)  
There is danger of an explosion if you replace the  
batteries used in the remote with the wrong type of  
battery. Replace only with the same or equivalent  
type.  
THIS PRODUCT UTILIZES A LASER. USE OF  
CONTROLS OR ADJUSTMENTS OR PERFORMANCE  
OF PROCEDURES OTHER THAN THOSE SPECIFIED  
HEREIN MAY RESULT IN HAZARDOUS RADIATION  
EXPOSURE. DO NOT OPEN THE COVER. DO NOT  
REPAIR THE PRODUCT YOURSELF. REFER SERVICING  
TO QUALIFIED PERSONNEL.  
WARNING :  
TO PREVENT THE SPREAD OF FIRE,  
KEEP CANDLES AND OTHER ITEMS  
WITH OPEN FLAMES AWAY FROM THIS  
PRODUCT AT ALL TIMES.  
This product contains chemicals known to the State of  
California to cause cancer and reproductive toxicity.  
CLASS 1  
KLASSE 1  
LUOKAN 1  
KLASS 1  
LASER PRODUCT  
LASER PRODUKT  
LASER LAITE  
LASER APPARAT  
FCC NOTES (for U.S.A)  
PRODUCTO LÁSER CLASE 1  
This equipment has been tested and found to comply  
with the limits for a Class B digital device, pursuant  
to Part 15 of the FCC rules. These limits are designed  
to provide reasonable protection against harmful  
interference in a residential installation. This equipment  
generates, uses and can radiate radio frequency energy  
and, if not installed and used in accordance with the  
instructions, may cause harmful interference to radio  
or television reception, which can be determined by  
turning the equipment off and on.  
Important Safety Instructions  
Read these operating instructions carefully before using  
the unit. Follow all the safety instructions listed below.  
Keep these operating instructions handy for future  
reference.  
1. Read these instructions.  
2. Keep these instructions.  
3. Heed all warnings.  
If interference is present, the user is encouraged to try to  
correct the interference by one or more of the following  
measures:  
4. Follow all instructions.  
Reorient or relocate the receiving antenna.  
5. Do not use this apparatus near water.  
6. Clean only with a dry cloth.  
Increase the separation between the equipment and  
receiver.  
7. Do not block any ventilation openings. Install in  
accordance with the manufacturer’s instructions.  
3 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety Information  
8. Do not install near any heat sources such as  
radiators, heat registers, stoves, or other apparatus  
(including AV receivers) that produce heat.  
Do not use the 3D Active Glasses for other purposes  
(such as general eyeglasses, sunglasses, protective  
goggles, etc.)  
Do not use the 3D function or 3D Active Glasses while  
walking or moving around. Using the 3D function or  
3D Active Glasses while moving around may cause  
you to bump into objects, trip, and/or fall, and cause  
serious injury.  
9. Do not defeat the safety purpose of the polarized  
or grounding-type plug. A polarized plug has two  
blades with one wider than the other. A grounding  
type plug has two blades and a third grounding  
prong. The wide blade or the third prong are  
provided for your safety. If the provided plug does  
not fit into your outlet, consult an electrician for  
replacement of the obsolete outlet.  
If you want to enjoy 3D content, connect a 3D device  
(3D compliant AV receiver or TV) to the product’s  
HDMI OUT port using a high-speed HDMI cable. Put  
on 3D glasses before playing the 3D content.  
10. Protect the power cord from being walked on  
or pinched particularly at plugs, convenience  
receptacles, and the point where it exits the  
apparatus.  
The product outputs 3D signals only through an HDMI  
cable connected to the HDMI OUT port.  
The video resolution in 3D play mode is fixed to  
the resolution of the original 3D video. You can not  
change the resolution.  
11. Only use attachments/accessories specified by the  
manufacturer.  
Some functions such as BD Wise, screen size  
adjustment, and resolution adjustment may not  
operate properly in 3D play mode.  
12. Use only with the cart, stand,  
tripod, bracket, or table  
specified by the manufacturer,  
or sold with the apparatus.  
When a cart is used, use  
caution when moving the  
cart/apparatus combination to avoid injury from  
tip-over.  
You must use a high-speed HDMI cable for proper  
output of the 3D signal.  
Stay at least three times the width of the screen from  
the TV when watching 3D images. For example, if  
you have a 46 inch screen, stay 138 inches (11.5 feet)  
from the screen.  
13. Unplug this apparatus during lightning storms or  
Place the 3D video screen at eye level for the best 3D  
picture.  
when unused for long periods of time.  
14. Refer all servicing to qualified service personnel.  
Servicing is required when the apparatus has been  
damaged in any way, such as when the power-  
supply cord or plug is damaged, liquid has been  
spilled or objects have fallen into the apparatus,  
the apparatus has been exposed to rain or  
moisture, does not operate normally, or has been  
dropped.  
When the product is connected to some 3D devices,  
the 3D effect may not function properly.  
This product does not convert 2D content into 3D.  
“Blu-ray 3D” and “Blu-ray 3D” logo are trademarks of  
the Blu-ray Disc Association.  
3D Precautions  
IMPORTANT HEALTH AND SAFETY INFORMATION FOR  
3D PICTURES.  
Read and understand the following safety information  
before using the 3D function.  
Some viewers may experience discomfort while  
viewing 3D TV such as dizziness, nausea, and  
headaches.  
If you experience any such symptom, stop viewing 3D  
TV, remove the 3D Active Glasses, and rest.  
Watching 3D images for an extended period of time  
may cause eye strain. If you feel eye strain, stop  
viewing 3D TV, remove your 3D Active Glasses, and  
rest.  
A responsible adult should frequently check on  
children who are using the 3D function.  
If there are any reports of tired eyes, headaches,  
dizziness, or nausea, have the child stop viewing 3D  
TV and rest.  
Download from Www.Somanu4als-.cEonmg.liAshll Manuals Search And Download.  
 
Contents  
GETTING STARTEd  
NETWORk SERvICES  
33 Using BD-LIVE™  
6
6
7
7
8
Accessories  
Speaker Components  
Front Panel  
33 Using DLNA  
33 Apps  
Rear Panel  
34 Using Opera TV Store  
35 Screen Mirroring  
Remote Control  
CONNECTIONS  
Connecting the Speakers  
AppENdIx  
9
36 Additional Information  
37 Disk and Format Compatibility  
42 Troubleshooting  
45 Specifications  
11 Attaching the Toroidal Ferrite Core to the Power  
Cord of the Wireless Receiver Module (SWA-  
6000)  
12 Connecting to a TV and External Devices  
46 Licenses  
13 Connecting to a Network Router  
SETTINGS  
Figures and illustrations in this User Manual  
are provided for reference only and may differ  
from actual product appearance.  
14 The Initial Settings Procedure  
15 The Home Screen at a Glance  
15 Accessing the Settings Screen  
16 Settings Menu Functions  
19 Network Setup  
21 Wi-Fi Direct  
22 Upgrading Software  
23 Setting Up DLNA  
pLAyING CONTENT  
24 Switching the Source Device  
24 Playing Commercial Discs  
24 Playing a Disc with User Recorded Content  
25 Playing Files on a USB Device  
26 Controlling Video Playback  
27 Playing a Pre-Recorded Commercial Audio Disc  
28 Controlling Music Playback  
29 Playing Photo Contents  
30 Listening to the Radio  
30 Using Bluetooth  
32 Using the Special Effects Remote Control  
Buttons  
5 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started  
Check the box for the accessories and speaker components listed or shown below.  
Accessories  
Remote Control (AH59-02533A)  
User Manual (AH68-02673A)  
Batteries (AAA size) (4301-000116)  
(For Power cord)  
power Cable (3903-000598)  
FM Antenna (AH42-00021A)  
Toroidal Ferrite Core (3301-000144)  
Speaker Components  
Center  
Wireless Receiver  
Subwoofer  
Front x 2  
Surround x 2  
Speaker Cable x 6  
Module (SWA-6000)  
Download from Www.Somanu6als-.cEonmg.liAshll Manuals Search And Download.  
Front Panel  
dISpLAy ICONS  
FUNCTION  
STOp  
pLAy/pAUSE  
vOLUME  
CONTROL  
OpEN/CLOSE  
pOWER  
dISpLAy  
5V 0.5A  
dISC TRAy  
REMOTE CONTROL SENSOR  
USB  
When the product is on, do not let children touch the product's surface. It will be hot.  
To upgrade the product's software through the USB jack, you must use a USB flash drive.  
When the product displays a Blu-ray Disc menu, you cannot start the movie by pressing the  
/
6
button on the product or the remote. To play the movie, you must select Play Movie or Start in the  
disc menu, and then press the button.  
v
If you are using the Internet or are playing content from a USB device on your TV through the home  
theater, you cannot select the Bd/dvd mode with the FUNCTION button. To select the Bd/dvd  
mode, exit the Internet or stop the content you are playing on the TV, and then select the Bd/dvd  
mode.  
Rear Panel  
AUx IN  
* FM ANTENNA  
HdMI OUT  
COOLING FAN  
SpEAkER OUTpUT  
CONNECTORS  
pOWER CORd  
ExTERNAL dIGITAL  
AUdIO IN (OpTICAL)  
LAN TERMINAL  
* Connecting the FM Antenna  
1. Connect the supplied FM antenna to the FM ANT Jack.  
2. Slowly move the antenna wire around until you find a location where reception is good, then fasten it to  
a wall or other rigid surface.  
Maintain a minimum of 4 inches of clear space on all sides of the home theater to ensure adequate  
ventilation.  
Do not obstruct the cooling fan or ventilation holes.  
This product does not receive AM broadcasts.  
7 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started  
Remote Control  
Tour of the Remote Control  
Turn the product on and off.  
Press to select Home Theater's  
mode. (BD/DVD, D. IN, AUX,  
etc.).  
FUNCTION  
MUTE  
To open and close the disc tray.  
VOLUME  
Adjust the volume.  
-
+
2
5
8
0
Cut off the sound temporarily.  
1
4
3
6
Press numeric buttons to  
operate options.  
7
9
DISC MENU  
TITLE MENU  
Use to enter the Popup  
menu/Title menu.  
Press to search backwards or  
forwards.  
Press to view the disc menu.  
POPUP  
Press to skip backwards or forwards.  
Press to play a disc or files.  
Press to pause playing.  
Press to stop a disc or files.  
SUBTITLE  
HOME  
REPEAT  
Allows you to repeat a title,  
chapter, track or disc.  
Selects the disc subtitle language.  
Press to move to the Home screen.  
TOOLS  
INFO  
Use to display the playback  
information when playing  
a Blu-ray/DVD disc or files.  
Press to use the Tools menu.  
Select on-screen menu items  
and change menu values.  
RETURN  
A
EXIT  
Press to exit the menu.  
Return to the previous menu.  
Use to set a preset radio frequency.  
TUNER  
MEMORY MO/ST  
These buttons are used both for  
menus on the product and also  
several Blu-ray Disc functions.  
B
C
D
TV SOUND DSP/EQ  
TUNING  
Select MONO or STEREO for radio  
broadcasts.  
UP  
DOWN  
Press to direct audio signal to home  
theater speaker or TV speaker.  
Search for active FM stations and  
to change channels.  
Select the desired DSP/EQ audio  
mode.  
Installing batteries in the Remote Control  
Make sure to match the "+" and "–" ends of the batteries  
with the diagram inside the compartment.  
Assuming typical usage, the batteries last for about one  
year.  
Battery size: AAA  
The remote control can be used up to approximately 23  
feet  
(7 meters) from the product in a straight line.  
Download from Www.Somanu8als-.cEonmg.liAshll Manuals Search And Download.  
Connections  
This section describes various methods of connecting the product to other external components.  
Before moving or installing the product, be sure to turn off the power and disconnect the power cord.  
Connecting the Speakers  
position of the product  
Place it on a stand or cabinet shelf, or  
under the TV stand.  
Front (R)  
Selecting the Listening position  
Center  
Subwoofer  
Front (L)  
The listening position should be  
located about 2.5 to 3 times the TV's  
screen size away from the TV. For  
example, if you have a 46 inch screen,  
locate the listening position 115 to  
138 inches (9.6 to 11.5 feet) from the  
screen.  
Surround (R)  
product  
Surround (L)  
Wireless  
Receiver Module  
Place these speakers in front of your listening position, facing inwards (about  
45°) toward you. Place the front speakers so that their tweeters will be at the  
same height as your ear. Align the front face of the front speakers with the  
front face of the center speaker or place them slightly in front of the center  
speakers.  
Front Speakers  
It is best to install the Center Speaker at the same height as the front speakers.  
You can also install it directly over or under the TV.  
Center Speaker  
Place these speakers to the side of your listening position. If there isn't enough  
room, place these speakers so they face each other. Position them about 2 to 3  
feet (60 to 90cm) above your ear, facing slightly downward.  
Surround Speakers  
* Unlike the front and center speakers, the surround speakers are used mainly  
for sound effects. Sound will not come from them all the time.  
Subwoofer  
The position of the subwoofer is not so critical. Place it anywhere you like.  
* Surround speakers must be connected to the wireless receiver module.  
* The appearance of your speakers may differ from the illustrations in this manual.  
* Each speaker has a colored label on its back or underside. Each cable has a single colored band near its end.  
Match the band on each cable to the speaker label by color, and then connect the cable to the speaker. See  
page 10 for exact instructions.  
9 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections  
Speaker Cable Connections  
1. Match each speaker cable bundle to the correct speaker by matching the color coded plug on each  
bundle to the colored sticker on the bottom or back of each speaker.  
2. Connect the speaker wire plugs from each speaker to the back of the product by matching the colors of  
the speaker plugs to the colors of the speaker jacks.  
Center Speaker  
Front Speaker (L)  
Front Speaker (R)  
Subwoofer  
Surround  
Speaker (L)  
Surround  
Speaker (R)  
Wireless Receiver Module  
* This product should be connected with the SWA-6000 only.  
If you place a speaker near your TV set, the screen color may be distorted because of the magnetic  
field.  
Place the wireless receiver module at the rear of the listening position. If the wireless receiver module  
is too close to the product, sound from the speakers may be disrupted because of interference.  
If you use a device such as a microwave oven, wireless LAN Card, Bluetooth device, or any other  
device that uses the 2.4/5.8GHz frequencies near the product, sound from the speakers may be  
disrupted because of interference.  
The maximum transmission distance from the product to the wireless receiver module is about 33  
feet (10m), but may vary depending on your operating environment. If a steel-concrete wall or  
metallic wall is between the product and the wireless receiver module, the system may not operate  
at all, because the radio waves cannot penetrate metal.  
If the product doesn't make a wireless connection, you need to run an ID Set between the product  
and wireless receiver module. With the product turned off, press "0" "1" "3" "5" on the remote  
control. Turn on the wireless receiver module. Then, press and hold the "Id SET" button on the back  
of the wireless receiver module for 5 seconds, and then turn the product on.  
10 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
| CAUTION |  
If you want to install the speakers on the wall, fasten screws or nails (not provided) firmly to the wall  
wherever you want to hang a speaker, and then, using the hole in the rear of each speaker, carefully  
hang each speaker on a screw or nail.  
Do not let children play with or near the speakers. They could get hurt if a speaker falls.  
When connecting the speaker wires to the speakers, make sure that the polarity (+/–) is correct.  
Keep the subwoofer speaker out of reach of children to prevent children from inserting their hands  
or alien substances into the duct (hole) of the subwoofer speaker.  
Do not hang the subwoofer on the wall using the duct (hole).  
The wireless receiving antenna is built into the wireless receiver module. Keep it away from water  
and moisture.  
For optimal listening performance, make sure that the area around the wireless receiver module  
location is clear of any obstructions.  
In 2-CH mode, you will hear no sound from the wireless surround speakers.  
Attaching the Toroidal Ferrite Core to the Power Cord of the Wireless Receiver  
Module (SWA-6000)  
If you attach a Toroidal ferrite core to the power cord of the wireless receiver module, it will help prevent RF  
interference from radio signals.  
1. Pull the fixing tab of the Toroidal ferrite core to open it.  
2. Make two loops in the wireless receiver module power cord.  
3. Attach the Toroidal ferrite core to the wireless receiver module's  
power cord as shown in the figure on the right, and then close it  
by pressiing it until it clicks.  
Attach the ferrite core as close to the Wireless Receiver Module  
as possible.  
11 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections  
Connecting to a TV and External Devices  
Red  
R
White  
W
Method 1  
Method 2  
External devices  
AUDIO OUT  
OPTICAL OUT  
HDMI IN  
Connecting to a Tv  
Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the HDMI IN  
jack on your TV. If the TV supports ARC, you can hear the audio from your TV through the home theater with  
only this cable connected. See page 17 in this manual and the section on ARC in your TV's user's manual  
for details.  
Connecting to External devices  
Two methods of connecting external devices to your home theater are explained below.  
Method 1 AUx IN : Connecting an External Analog Component  
Using an RCA audio cable (not supplied), connect the AUDIO In jack on the product to the AUDIO Out jack on  
the external analog component.  
Select the AUx mode.  
Be sure to match the colors on the cable plugs to the colors on the input and output jacks.  
Method 2 OpTICAL : Connecting an External digital Audio Component  
Use to connect the digital audio output of digital signal components such as Cable Boxes and Satellite  
Receivers (Set-Top-Boxes) to the home theater. Using a digital optical cable (not supplied), connect the Optical  
Digital Audio In jack on the product to the Digital Optical Out jack of the external digital device using a digital  
optical cable.  
Select the d. IN mode.  
To see video from your Cable Box/Satellite receiver, you must connect its video output directly to your TV.  
This system supports Digital sampling frequencies of 32 kHz or higher from external digital  
components.  
This system supports only DTS and Dolby Digital audio. MPEG audio, a bitstream format, is not  
supported.  
Selecting an External device to Use  
To select an external device after you have connected it, press the FUNCTION button. Each time you press the  
button, the mode changes in this order : Bd/dvd d. IN AUx FM BT  
;
;
;
;
12 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Wireless Network  
Connecting to a Network Router  
You can connect your product to your network  
router using one of the methods illustrated below.  
Wired Network  
Wireless Ip sharer  
Broadband modem  
(with integrated router)  
Broadband  
service  
Broadband  
Or  
service  
If your wireless IP router supports DHCP, this  
product can use a DHCP or static IP address to  
connect to the wireless network.  
Router  
Set your wireless IP router to Infrastructure  
mode. Ad-hoc mode is not supported.  
The product supports only the following  
wireless security key protocols:  
Broadband  
service  
Broadband  
WEP (OPEN/SHARED), WPA-PSK (TKIP/AES),  
-
modem  
WPA2-PSK (TKIP/AES)  
Select a channel on the wireless IP router that  
is not currently being used. If the channel set  
for the wireless IP router is currently being  
used by another device nearby, it will result in  
interference and communication failure.  
Your router or your Internet Service Provider's  
policies may prevent the product from  
accessing Samsung's software update server.  
If this occurs, contact your Internet Service  
Provider (ISP) for more information.  
In compliance with the newest Wi-Fi  
certification specifications, Samsung home  
theaters do not support WEP, TKIP, or TKIP-  
AES (WPS2 Mixed) security encryption in  
networks running in the 802.11n mode.  
DSL users, please use a router to make a  
network connection.  
To use the DLNA function, you must connect  
your PC to your network as shown in the  
illustrations above.  
Wireless LAN, by its nature, may cause  
interference, depending on the operating  
conditions (AP performance, distance,  
obstacles, interference by other radio devices,  
etc).  
The connection can be wired or wireless.  
13 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Settings  
4:3 pan-Scan - For older, standard screen,  
analog TVs. Displays 4:3 pictures in full screen  
and 16:9 pictures in Pan-Scan format that fills  
the screen, but cuts off the left and right sides  
of the picture and enlarges the middle vertically.  
The Initial Settings Procedure  
The Home menu will not appear if you do not  
configure the initial settings.  
The OSD (On Screen Display) may change in  
this product after you upgrade the software  
version.  
5. The Network screen appears.  
- Before you begin, confirm that the product is  
connected to your router.  
The access steps may differ depending on the  
menu you selected.  
- Set to wired or wireless depending on your  
network environment.  
- If you have a network with static IP addresses,  
we suggest you select Skip by pressing the  
BLUE (d) button.  
1. Turn on your TV after connecting the product,  
and then turn on the product. When you turn  
on the product for the first time, the product  
automatically displays the Initial Settings  
Language screen.  
If you skip network setup here or the setup  
does not work correctly, you can set up the  
product's network connection later. (See page  
2. Press the ▲▼ buttons to select the desired  
language, and then press the  
button.  
v
Initial Settings | Network  
Select your network type.  
3. Press the  
button to start function setup.  
v
Initial Settings  
Network Type  
Wireless  
TV Aspect and Network will be set.  
Wired  
Each setting may be changed later under "Settings"  
Connect  
Network cable connected.  
Start  
6. The product verifies the network connection  
Previous  
Select  
a
"
and then connects to the network. When it is  
done, press the  
completed." screen appears, and then the  
Home screen appears.  
button. The "Initial settings  
v
4. The Tv Aspect screen appears. Press the ▲▼  
buttons to select a TV aspect ratio, and then  
press the  
button.  
v
You have four choices:  
If you want to display the Initial Settings screen  
again and make changes, select the Reset  
16:9 Original - For widescreen TVs. Displays  
widescreen pictures in their original 16:9 format  
and 4:3 pictures (the old, standard format) in  
4:3 pillar box format with black bars on the left  
and right.  
16:9 Full - For widescreen TVs. Displays  
widescreen pictures in their original 16:9 format  
and expands 4:3 pictures to fill the 16:9 screen.  
4:3 Letter Box - For older, standard screen,  
analog TVs. Displays 4:3 pictures in full screen  
and 16:9 pictures in letter box format that  
retains the 16:9 aspect ratio but puts black bars  
above and below the picture.  
If you use an HDMI cable to connect the  
product to an Anynet+ (HDMI-CEC)-compliant  
Samsung TV and 1.) You have set the Anynet+  
(HdMI-CEC) feature to On in both the TV  
and the product and 2.) You have set the  
TV to a language supported by the product,  
the product will select that language as the  
preferred language automatically.  
14 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
The Home Screen at a Glance  
Function  
8
Use for switching to an external device, and  
for radio and mode switching for a Bluetooth  
connection. You can use the remote control’s  
1
2
Play Disc  
Photos  
Videos  
Music  
FUNCTION button and the main unit’s  
button  
for mode switching.  
Settings  
9
Set various functions to suit your personal  
preferences.  
Blu-ray  
To play or view video, photo, music files  
located on your PC, you must connect your  
home theater and PC to a home network and  
you must download, install, and configure the  
App 1 App 2 App 3 App 4  
Opera TV More  
Store  
Screen Change Function Settings  
Mirroring Device  
3
45 6 7 8 9  
Accessing the Settings Screen  
play disc  
1
1. Select Settings on the Home screen, and then  
press  
. The Settings screen appears.  
v
The disc currently in the tray is displayed.  
Press to start playing the disc.  
v
Settings  
Display  
photos/videos/Music  
2
3D Settings  
TV Aspect Ratio  
BD Wise  
: 16:9 Original  
Audio  
Play photos, videos, or music content from  
Disc, USB, PC, or mobile devices.  
: Off  
Network  
System  
Resolution  
: Auto  
: Off  
Apps  
3
Movie Frame (24Fs)  
HDMI Color Format  
HDMI Deep Color  
Progressive Mode  
Language  
Security  
General  
Support  
: Auto  
: Off  
Access various for pay or free-of-charge  
applications.  
: Auto  
Opera Tv Store  
4
Makes the Web-based App for TV available for  
use.  
2. To access the menus, sub-menus, and options  
on the Settings screen, please refer to the  
More  
5
A list of useful and popular apps we recommend.  
Screen Mirroring  
If you leave the product in the stop mode for  
more than 5 minutes without using it, a screen  
saver will appears on your TV. If the product is  
left in the screen saver mode for more than 20  
minutes, the power automatically turns off.  
6
Set up the wireless mirroring function between  
the home theater and a smart phone or tablet.  
Change device  
7
Displays a list of external devices connected to the  
main unit. Switch to the desired device.  
15 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Settings  
Buttons on the Remote Control Used for  
the Settings Menu  
Settings Menu Functions  
SUBTITLE  
HOME  
REPEAT  
display  
3d Settings  
1
2
TOOLS  
INFO  
Set up the 3D related functions.  
3d Blu-ray playback Mode: Select whether  
to play a Blu-ray Disc with 3D contents in 3D  
Mode. If you move to the Home menu while  
in 3D mode, the product will switch to 2D  
automatically.  
3
4
RETURN  
EXIT  
Screen Size: Enter the size of the TV attached to  
the product. The product will automatically adjust  
the 3D output to the screen size of the TV.  
HOME Button : Press to move to the Home  
screen.  
1
Carefully read the health and safety information  
RETURN Button : Press to return to the  
previous menu.  
2
3
4
Tv Aspect Ratio  
(ENTER) / dIRECTION Button :  
v
Lets you adjust the output of the product to the  
screen size of your TV. (See page 36)  
Press ▲▼◀▶ to move the cursor or  
select an item.  
Press the  
button to activate the  
v
Bd Wise  
currently selected item or confirm a  
setting.  
Bd Wise is Samsung’s latest inter-connectivity  
feature. When you connect a Samsung product  
and a Samsung TV with Bd Wise to each other  
via HDMI, and Bd Wise is on in both the product  
and TV, the product outputs video at the video  
resolution and frame rate of the Blu-ray/DVD Disc.  
ExIT Button : Press to exit the current  
menu.  
detailed Function Information  
Each Settings function, menu item, and individual  
option is explained in detail on-screen. To view an  
explanation, use the ▲▼◀▶ buttons to select the  
function, menu item, or option. The explanation will  
usually appear on the bottom of the screen.  
Resolution  
Lets you set the output resolution of the HDMI  
video signal to Bd Wise, Auto, 1080p, 1080i,  
720p, 480p. The number indicates the number  
of lines of video per frame. The i and p indicate  
interlaced and progressive scan, respectively. The  
more lines, the higher quality.  
A short description of each Settings function starts  
on this page. Additional information on some of the  
functions is also in the Appendix of this manual.  
Movie Frame (24Fs)  
Setting the Movie Frame (24Fs) feature to Auto lets  
the product adjust its HDMI output to 24 frames  
per second automatically for improved picture  
quality if attached to a 24Fs compatible TV.  
You can enjoy the Movie Frame (24Fs) feature  
only on a TV supporting this frame rate.  
Movie Frame is only available when the product  
is in the HDMI 1080p output resolution modes.  
HdMI Color Format  
Lets you set the color space format for the HDMI  
output to match the capabilities of the connected  
device (TV, monitor, etc).  
16 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
HdMI deep Color  
dynamic Range Control  
Lets you set the product to output video from  
the HDMI OUT jack with Deep Color. Deep Color  
provides more accurate color reproduction with  
greater color depth.  
Lets you apply dynamic range control to Dolby  
Digital, Dolby Digital Plus, and Dolby TrueHD audio.  
Auto: Automatically controls the dynamic range  
of Dolby TrueHD audio, based on information  
in the Dolby TrueHD soundtrack. Also turns  
dynamic range control off for Dolby Digital and  
Dolby Digital Plus.  
progressive Mode  
Lets you improve picture quality when viewing  
DVDs.  
Off: Leaves the dynamic range uncompressed,  
letting you hear the original sound.  
Audio  
On: Turns dynamic range control on for all three  
Dolby formats. Quieter sounds are made louder  
and the volume of loud sounds is reduced.  
Speaker Settings  
Lets you adjust the following speaker settings and  
turn the test tone on and off so you can test the  
speakers.  
downmixing Mode  
Lets you select the multi-channel downmix method  
that is compatible with your stereo system. You can  
choose to have the product downmix to Normal  
Stereo or to Surround Compatible.  
Level: Lets you adjust the relative loudness of  
each speaker from 6dB to -6dB. For example,  
if you like deep bass, you can increase the  
loudness of the subwoofer by 6dB.  
Audio Sync  
distance: Lets you adjust the relative distance  
of each speaker from the listening position up  
to 30 feet. The farther the distance, the louder  
the speaker will be.  
When the product is attached to a digital TV, lets  
you adjust the audio delay so that the audio syncs  
with the video. You can set the delay between 0  
and 300 milliseconds.  
Test Tone Lets you run the Test Tone function so  
:
you can test your adjustments. Setting Test Tone to  
On turns the Test Tone on. Setting it to Off turns it  
off.  
Network  
Network Settings  
Speaker Selection  
Lets you configure the network connection so  
you can enjoy various features such as Internet  
services or DLNA Wi-Fi functionality, and perform  
software upgrades.  
Lets you select which speakers you want active,  
either the TV's speakers or the home theater's  
speakers.  
Audio Return Channel  
Network Test  
Lets you direct the sound from the TV to the  
Home Theater speakers. Requires an HDMI  
connection and an Audio Return Channel (ARC)  
compatible TV.  
Lets you test the Internet Protocol setup to see if  
it is working correctly.  
Network Status  
If Audio Return Channel is set to on and you are  
using an HDMI cable to connect the product to  
the TV, digital optical input will not work.  
Lets you check the current network and Internet status.  
Wi-Fi direct  
If Audio Return Channel is set to Auto and  
Lets you connect a Wi-Fi direct device to the  
product using a peer-to-peer network, without  
the need for a wireless router.  
Note that if the product is connected to a wireless  
network, it may be disconnected when you use  
Wi-Fi direct. (See page 21)  
you are using an HDMI cable to connect the  
product to the TV, ARC or digital optical input is  
selected automatically.  
digital Output  
Lets you set the digital Output to match the  
capabilities of the AV receiver you’ve connected to  
the product. For more details, please refer to the  
Text files, such as files with a .TXT or .DOC  
extension, will not display when you are using  
the Wi-Fi direct function.  
17 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Settings  
Screen Mirroring  
Language  
The Screen Mirroring function lets you view the  
screen of your smart phone or smart device on  
the TV you have connected to the home theater  
Lets you select the language you prefer for the  
On-Screen Menu, disc menu, etc.  
The selected language will only appear if it is  
supported on the disc.  
device Name  
Security  
Lets you assign an identifying name to the  
product. You use this name to identify the  
product when you are connecting external Wi-Fi  
devices (smart phones, tablets, etc.) to it.  
The default PIN is 0000. Enter the default PIN to  
access the security function if you haven't created  
your own PIN.  
Bd parental Rating  
Bd-Live Internet Connection  
Prevents playback of Blu-ray Discs with a rating  
equal to or above a specific age rating unless you  
enter the PIN.  
Lets you allow or prohibit an Internet connection  
for the BD-Live service.  
dvd parental Rating  
System  
Prevents playback of DVDs with a rating above a  
specific numerical rating unless you enter the PIN.  
Initial Settings  
Lets you re-run the Initial Settings procedure. (See  
Change pIN  
Changes the 4-digit PIN used to access security  
functions.  
Quick Start  
You can turn on the power quickly by decreasing  
the boot time.  
General  
If this function is set to On, Standby power  
consumption will be increased. (About 12W  
~ 20W)  
Time Zone  
Lets you specify the time zone that is applicable to  
your area.  
Anynet+ (HdMI-CEC)  
Support  
Anynet+ is a convenient function that offers  
linked operations with other Samsung products  
that have the Anynet+ feature and lets you control  
those products with one Samsung TV remote.  
To operate this function, you must connect this  
product to an Anynet+ Samsung TV using a HDMI  
cable.  
Software Upgrade  
For more information about this function see  
Contact Samsung  
Provides contact information for assistance with  
your product.  
Bd data Management  
Lets you manage the contents you downloaded  
through a Blu-ray disc that supports the BD-Live  
service. You can view the information about the  
USB device you are using for BD Live data storage  
including the storage space. You can also delete  
BD Live data and change the device.  
Terms of Service Agreement  
View the general disclaimer regarding third party  
contents and services.  
Reset  
Reverts all settings to their defaults except for the  
network. Requires that you enter your security  
PIN. The default security PIN is 0000.  
18 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Network Setup  
Network Settings  
Wired network connection failed.  
When you connect this product to a network, you  
can use network based applications and functions  
such as BD-LIVE and upgrade the product's software  
through the network connection.  
MAC Address  
XX:XX:XX:XX:XX:XX  
IP Address  
Subnet Mask  
Gateway  
0. 0. 0.  
0. 0. 0.  
0. 0. 0.  
0. 0. 0.  
0
0
0
0
DNS Server  
IP auto setting failed. Try the following to set up IP automatically, or set up the IP manually by  
selecting 'IP Settings'.  
Configuring your Network Connection  
-
Ensure that DHCP server is enabled on the wireless network, and then unplug and re-plug the wireless  
network.  
To begin configuring your network connection,  
follow these steps:  
- Contact your Internet Service Provider for more information.  
Change Network  
IP Settings  
a Previous  
Retry  
Close  
< Move " Select  
1. In the Home screen, select Settings, and then  
d Skip  
press the  
button.  
v
2. Select Network, and then press the  
button.  
v
2. Use the ◀▶ buttons to select Ip Settings, and  
then press the button. The Ip Settings  
3. Select Network Settings, and then press the  
v
v
screen appears.  
button.  
3. Select the Ip Setting field, and then set it to  
4. Go to the instructions for Wired networks  
Enter manually.  
starting below or the instructions for Wireless  
networks on the bottom right of this page.  
4. Select a parameter to enter (Ip Address, for  
example), and then press  
. Use the number  
v
Wired Network  
keypad on your remote control to enter the  
numbers for the parameter. You can also enter  
numbers using the ▲▼ buttons. Use the ◀▶  
buttons on the remote control to move from  
entry field to entry field within a parameter.  
Ğ
Wired – Automatic  
After following Steps 1 to 3 above:  
1. In the Network Settings screen, change  
When done with one parameter, press the  
button.  
v
Network Type to Wired. Then, select Connect  
and press the  
button. The product detects  
v
the wired connection, verifies the network  
connection, and then connects to the network.  
5. Press the ▲ or ▼ button to move to another  
parameter, and then enter the numbers for that  
parameter following the instructions in Step 4.  
2. When it is done, highlight Ok, and then press  
button.  
v
6. Repeat Steps 4 and 5 until you have filled in all  
parameters.  
Ğ
Wired - Manual  
You can get the network parameter values  
from your Internet provider.  
If you have a static IP address or the automatic  
procedure does not work, you'll need to set the  
Network Settings values manually.  
7. When finished entering all the parameter  
values, select Return ( ), and then press the  
'
After following Steps 1 to 3 above:  
button. The home theater verifies the  
v
1. In the Network Settings screen, change  
network connection and then connects to the  
network.  
Network Type to Wired. Then, select Connect  
and press the  
button.  
v
The product searches for a network, and then  
displays the connection failed message.  
Wireless Network  
You can set up a wireless network connection in  
three ways:  
If it is possible to connect the home theater  
to your network wirelessly, select Change  
Network at this point, change the Network  
Type to Wireless, and then go to the  
instructions for wireless networks on the  
bottom right of this page.  
Wireless Automatic  
-
Wireless Manual  
-
WPS(PBC)  
-
Before you configure the wireless network  
connection, disconnect any wireless network devices  
currently connected to the product or, if applicable,  
the product's current wired connection.  
19 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Settings  
Ğ
Wireless - Automatic  
4. Enter your wireless network or wireless router's  
name.  
Follow the Steps 1 to 3 in "Configuring Your  
Enter numbers directly using the number  
buttons on your remote control.  
1. In the Network Settings screen, change  
Network Type to Wireless. The product searches  
for and then displays a list of the available  
networks.  
Enter letters by selecting a letter with the  
▲▼◀▶ buttons, and then pressing the  
button.  
v
To display capital letters (or redisplay lower  
case letters if capital letters are displayed),  
Network Settings  
select  
To display symbols and punctuation, select  
123#&, and then press the button. To  
, and then press the  
button.  
v
Select your network type.  
Network Type  
Wireless  
v
Wireless network  
redisplay letters, select 123#&, and then  
press the button.  
v
si-ap  
You can connect your BD  
Home Theater to the  
internet. Please select which wireless  
network to use.  
When finished, select done, and then press the  
button.  
MIC  
v
KIMING_VTOWER  
5. On the Security method screen that appears,  
WPS(PBC)  
Search  
use the ▲▼ buttons to select the network's  
Security method, and then press the  
v
m Move  
" Select  
' Return  
button. On the next screen, enter your  
network's security code or pass phrase.  
2. Select the desired network, and then press the  
button.  
Enter numbers directly using the number  
v
buttons on your remote control.  
3. On the Security screen, enter your network's  
security code or pass phrase.  
Enter letters by selecting a letter with the  
▲▼◀▶ buttons, and then pressing the  
button.  
v
Enter numbers directly using the number  
buttons on your remote control. Enter letters  
by selecting a letter with ▲▼◀▶ buttons, and  
When finished, select done, and then press  
the button. The product searches for the  
then pressing  
button.  
v
v
network.  
4. When finished, select done, and then press the  
button. The product verifies the network  
6. The Network connection fail screen appears.  
v
Use ◀▶ buttons to select Ip Settings, and then  
connection and then connects to the network.  
press the  
button.  
v
You should be able to find the security code or  
pass phrase on one of the set up screens you  
used to set up your router or modem.  
7. Select the Ip Setting field, and then set it to  
Enter manually.  
8. Select a network parameter to enter (Ip  
Ğ
Wireless - Manual  
Address, for example), and then press  
v
If you have a static IP address or the Automatic  
procedure does not work, you'll need to set the  
Network Settings values manually.  
button. Use the number keypad on your remote  
control to enter the numbers for the parameter.  
You can also enter numbers using the ▲▼  
buttons. Use the ◀▶ buttons on the remote  
control to move from entry field to entry field  
within a parameter. When done with one value,  
Follow the Steps 1 to 3 in "Configuring Your  
1. In the Network Settings screen, change  
Network Type to Wireless. The product searches  
for and then displays a list of the available  
networks.  
press the  
button.  
v
9. Press the ▲ or ▼ button to move to another  
parameter, and then enter the numbers for that  
parameter following the instructions in Step 8.  
2. Scroll through the list, select the desired  
network or Add Network, and then press the  
10. Repeat Steps 8 and 9 until you have filled in all  
button.  
v
parameters.  
3. If you selected a network in Step 2, go to Step 6.  
If you selected Add Network, go to Step 4.  
20 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
You can get the Network parameter values  
from your Internet provider.  
Wi-Fi Direct  
The Wi-Fi direct function allows you to connect Wi-  
Fi direct devices to the product and each other using  
a peer-to-peer network, without a wireless router.  
11. When finished, select Return ( ), and then  
'
press the  
appears.  
button. The Security key screen  
v
Some Wi-Fi direct devices may not support  
12. On the Security key screen, enter your  
network's Security Code or Pass Phrase. Enter  
numbers directly using the number buttons on  
your remote control. Enter letters by selecting  
a letter with the ▲▼◀▶ buttons, and then  
the DLNA function if connected via Wi-Fi  
direct. If this is the case, change the network  
connection method you used to connect the  
device to the home theater.  
pressing the  
button.  
v
Wi-Fi direct transmissions can interfere  
with Bluetooth signals. Before you use the  
Bluetooth function, we strongly recommend  
that you turn off the Wi-Fi direct function on  
any device in which it is currently on.  
13. When finished, select done at the right of the  
screen, and then press the button. The  
v
product verifies the network connection and  
then connects to the network.  
1. Turn on the Wi-Fi direct device and activate its  
14. After the home theater verifies the network,  
Wi-Fi direct function.  
select Ok, and then press the  
button.  
v
2. In the Home screen, select Settings, and then  
You can also begin the Manual Network setup  
by going to Settings > Network > Network  
Status.  
press the  
button.  
v
3. Select Network, and then press the  
button.  
v
4. Select Wi-Fi direct, and then press the  
v
Ğ
WpS(pBC)  
button.  
One of the easiest ways to set up the wireless  
network connection is using the WpS(pBC) function.  
If your wireless router has a WpS(pBC) button,  
follow these steps:  
The Wi-Fi direct devices that you can connect  
to appear.  
Settings  
Follow the Steps 1 to 3 in "Configuring Your  
Wi-Fi Direct  
Dis
Device Name : HT-H5500  
Au
Select your Wi-Fi Direct device to connect to.  
Ne
1. In the Network Settings screen, change  
Network Type to Wireless. The product searches  
for and then displays a list of the available  
networks.  
AndroidXXXXXXX  
Sys
Not Connected  
Refresh  
Close  
Lan
Sec
Ge
Su
2. Scroll the list down, select WpS(pBC), and then  
press the  
button.  
v
3. Press the WpS(pBC) button on your router  
within two minutes. Your product automatically  
acquires all the network settings values it  
needs and connects to your network after the  
network connection is verified.  
5. You have three ways to complete the Wi-Fi  
connection:  
Through the Wi-Fi device.  
4. When it is done, highlight Ok, and then press  
Through the product using PBC.  
the  
button.  
v
Through the product using a PIN.  
For a WPS connection, set your wireless  
router’s security encryption to AES. WEP  
security encryption does not support a WPS  
connection.  
Each is covered below.  
Through the Wi-Fi device  
1. On the Wi-Fi device, follow the device's  
procedure for connecting to another Wi-Fi  
direct device. See the device's user manual for  
instructions.  
21 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Settings  
2. When you have completed the procedure, you  
should see a pop-up on your TV screen saying  
that a device that supports Wi-Fi direct has  
requested to connect. Select Ok, and then  
Never turn the product off or back on manually  
during the update process.  
The update is complete when the product turns  
off after restarting. Press the pOWER button to  
turn on the updated product for your use.  
press the  
button to accept.  
v
3. The Connecting pop-up appears, followed by  
the Connected pop-up. When it closes, you  
should see the device listed on the Wi-Fi direct  
screen as connected.  
Samsung Electronics takes no legal  
responsibility for product malfunction  
caused by an unstable Internet connection  
or consumer negligence during a software  
upgrade.  
The PBC and PIN procedures connect devices  
automatically.  
1. In the Home menu, select Settings, and then  
press the button.  
v
Through the product Using pBC  
2. Select Support, and then press the  
button.  
v
1. Select the Wi-Fi direct device you want to  
3. Select Software Upgrade, and then press the  
button.  
connect to this product, and then press the  
button.  
v
v
4. Select one of the following methods:  
2. The Connecting pop-up appears, followed by  
the Connected pop-up. When it closes, you  
should see the device listed on the Wi-Fi direct  
screen as connected.  
By Online  
By USB  
Auto Upgrade Notification  
5. Press the  
button.  
v
Through the product Using a pIN  
Directions for each method begin below.  
1. Select the Wi-Fi direct device you want to  
If you want to cancel the upgrade while the  
upgrade software is downloading, press the  
connect to this product, and then press the  
button.  
v
button.  
v
2. The PIN pop-up appears.  
By Online  
3. Note the PIN code in the pop-up, and then  
enter it into the appropriate field in the Wi-Fi  
direct device you want to connect.  
Your product must be connected to the Internet to  
use the By Online function. Remove all discs before  
you begin.  
4. The Connecting pop-up appears, followed by  
the Connected pop-up. When it closes, you  
should see the device listed on the Wi-Fi direct  
screen as connected.  
1. Select By Online, and then press the  
button.  
v
The Connecting to Server message appears.  
2. If an update is available, a popup message  
appears asking if you want to upgrade. If you  
select yes, the product turns off automatically,  
turns on, and then begins the upgrade.  
The current wired or wireless network  
connection will be disconnected when you use  
the Wi-Fi direct function.  
Text files, such as files with a .TXT or .DOC  
3. The update progress popup appears. When  
the update is completed, the product turns off  
automatically again.  
extension, will not display when you are using  
the Wi-Fi direct function.  
4. Press the pOWER button to turn on the  
product.  
Upgrading Software  
By USB  
The Software Upgrade menu allows you to  
upgrade the product’s software for performance  
improvements or additional services.  
2. Click SUppORT on the top right of the page.  
3. Enter the product's model number into the  
search field. As you enter the model number, a  
drop down will display products that match the  
model number.  
22 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
4. Left click your product's model number in the  
4. The update progress popup will appear. When  
the update is complete, the product will turn  
off automatically again.  
drop down list.  
5. On the page that appears, scroll down to and  
then click Firmware Manuals & downloads.  
5. Press the pOWER button to turn on the  
product.  
6. Click Firmware in the center of the page.  
7. Click the ZIp icon in the File column on the right  
Setting Up DLNA  
side of the page.  
8. Click Send in the first pop-up that appears.  
Click Ok in the second pop-up to download  
and save the firmware file to your PC.  
DLNA enables you to play music, video, and photo  
files located in your PC using this product. To use  
DLNA, you must connect the product to your PC  
SAMSUNG PC Share Manager on the PC.  
9. Unzip the zip archive to your computer. You  
should have a single folder with the same name  
as the zip file.  
To download the dLNA Software  
10. Copy the folder to a USB flash drive.  
To use DLNA with your PC, you must install DLNA  
software on your PC. You can download the PC  
software and get detailed instructions for using  
DLNA from the Samsung.com website.  
11. Make sure no disc is inserted in the product,  
and then insert the USB flash drive into the USB  
port of the product.  
12. In the product’s menu, go to Settings > Support  
> Software Upgrade.  
2. Click SUppORT at the top of the page.  
13. Select By USB.  
3. Enter the product's model number into the  
search field. As you enter the model number, a  
drop down will display products that match the  
model number.  
14. The home theater searches for the software on  
the USB drive. When it finds the software, the  
Update Request pop-up appears.  
15. Select Ok. The home theater turns off, turns  
on, and then begins the upgrade. When the  
upgrade is done, the home theater turns off.  
4. Left click your product's model number in the  
drop down list.  
5. On the page that appears, scroll down to and  
16. Press the pOWER button to turn on the home  
then click Firmware Manuals & downloads.  
theater.  
6. Click the Software tab.  
There should be no disc in the product when  
you upgrade the software using the USB Host  
jack.  
7. On the software tab, click the EXE icon on the  
right side of the DLNA line.  
When the software upgrade is done, check  
the software details in the Software Upgrade  
8. In the first pop-up that appears, click Send. In  
the second pop-up, click Save File.  
menu.  
9. Find the DLNA install file on your disk, and then  
double click the file.  
Auto Upgrade Notification  
10. In the pop-up that appears, click Run, and  
then follow the directions that appear on your  
screen.  
If your product is connected to the network and you  
set Auto Upgrade Notification on, the product will  
notify you if a new software version is available with  
a pop-up message.  
Download the DLNA Installation/Instruction  
manual from the same Software Tab by clicking the  
corresponding PDF file symbol in the File column  
on the right. The file, in PDF format, will download  
and open. Follow the directions to install and setup  
DLNA. You can view and/or save the file.  
1. Turn on the product.  
2. In the Software Upgrade menu, set Auto  
Upgrade Notification to On.  
If there is a new software version available, the  
product will notify you with a pop-up message.  
To use DLNA with your smart phone, you  
need to connect your home theater and smart  
phone to the same network.  
3. To upgrade the firmware, select yes. The  
product turns off automatically, turns on, and  
then begins the upgrade.  
23 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Playing Content  
Your home theater can play content located on  
Blu-ray/DVD/CD discs, USB devices, PCs, smart  
phones, tablets, and in Apps.  
3. Press the button to close the disc tray.  
^
Playback starts automatically.  
4. If playback does not start automatically, press  
To play content located on your PC or a mobile  
device, you must connect the PC or mobile device  
and the product to your network. To play content on  
your PC, you must also download and install DLNA  
network software or already have DLNA network  
software on your PC.  
the  
button on the remote.  
6
disc Storage & Management  
Holding Discs  
Fingerprints or scratches on  
a disc may reduce sound and  
picture quality or cause skipping.  
-
PCs running Windows 7 and Windows 8 have  
DLNA software (Play To) built in.  
Avoid touching the surface of a disc where data  
has been recorded.  
-
Switching the Source Device  
Hold the disc by the edges so that fingerprints  
will not get on the surface.  
-
If two or more external devices are connected to the  
main unit, you can use any of the three methods  
described below to change the source device.  
Do not stick paper or tape on the disc.  
-
Cleaning Discs  
If you get fingerprints or dirt on a  
-
Method 1  
disc, clean it with a mild detergent  
diluted in water and wipe with a  
soft cloth.  
From the Home screen, use the ▲▼◀▶ buttons to  
move to Change device, and then press  
.
v
When cleaning, wipe gently from  
the inside to the outside of the disc.  
-
The Change device popup window will appear. Use  
the ▲▼ buttons to move to the desired device, and  
then press  
.
Disc Storage  
v
-
`
Do not keep in direct sunlight.  
Method 2  
`
Keep in a cool ventilated area.  
If you move to photos, videos, Music or other file-  
based contents, a list of folders and files will appear.  
Press the REd (A) button to display the Change  
device popup window, use the ▲▼ buttons to move  
`
Keep in a clean protective jacket and store  
vertically.  
to the desired device, and then press  
.
v
Playing a Disc with User Recorded  
Content  
Method 3  
When a device is connected for the first time, a  
popup window appears on which you can change  
the source device by using the ◀▶ buttons.  
You can play multimedia files you have recorded on  
Blu-ray, DVD, or CD discs.  
1. Place a user recorded disc into the disc tray with  
the disc’s label facing up, and then close the  
tray.  
Playing Commercial Discs  
2. Use the ▲▼◀▶ buttons to select the type of  
1. Press the button to open the disc tray.  
^
content you want to view or play - photos,  
2. Place a disc gently into the disc tray with the  
videos, or Music - and then press the  
v
disc’s label facing up.  
button.  
OR  
2-1. Select play disc from the Home screen. The play  
disc screen appears. Use the ▲▼ buttons to  
select the desired content type, photos, videos,  
or Music.  
24 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
3. A screen appears listing the contents of the  
disc. Depending on how the contents are  
arranged, you will see either folders, individual  
files, or both.  
3. If necessary, use the ▲▼◀▶ buttons to select  
a folder, and then press the button.  
v
4. Select a file to view or play, and then press the  
button.  
v
4. If necessary, use the ▲▼◀▶buttons to select a  
5. Press the RETURN button to exit a folder or the  
folder, and then press the  
button.  
ExIT button to return to the Home screen.  
v
explain how to control playback of videos,  
music, and pictures on a USB device.  
5. Use the ▲▼◀▶ buttons to select a file to view  
or play, and then press the button.  
v
6. Press the RETURN button one or more times to  
exit a current screen, exit a folder, or to return  
to the Home screen.  
Method 2 : If the product is turned on after  
you connect a USB device  
Press the ExIT button to return directly to the  
Home Screen.  
1. Turn the product on.  
explain how to control playback of videos,  
music, and pictures on a disc.  
2. Press Change device and select a USB device.  
3. Use the ◀▶ buttons to select photos, videos,  
or Music on the Home screen, and then press  
the  
button.  
v
Playing Files on a USB Device  
4. If necessary, use the ▲▼◀▶ buttons to select  
a folder, and then press the button.  
v
There are two methods you can use to play or view  
multimedia files located on a USB device through  
your product.  
5. Select a file to view or play, and then press the  
button.  
v
6. Press the RETURN button to exit a folder or the  
Method 1 : If you connect a USB device while  
the product is turned on  
ExIT button to return to the Home screen.  
explain how to control playback of videos,  
music, and pictures on a USB device.  
1. The "New device connected." pop-up appears.  
If you insert a disc when playing a USB device  
or phone, the device mode changes to "Disc"  
automatically.  
New device connected.  
USB DISK  
If your cellular phone is DLNA compatible, you  
can play contents without connecting a USB  
Photos  
Videos  
Music  
If the pop-up does not appear, go to Method  
2.  
2. Use the ▲▼ buttons to select photos, videos,  
or Music and then press the button.  
v
Depending on how the contents are arranged,  
you will see either folders, individual files, or  
both.  
25 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Playing Content  
Controlling Video Playback  
Using the disc menu, title menu, popup  
menu, and title list  
2
You can control the playback of video content  
located on a Blu-ray/DVD disc, USB device, mobile  
device, or PC. Depending on the disc or contents,  
some of the functions described in this manual may  
not be available.  
dISC MENU  
During playback, press this button to display the  
Disc menu.  
TITLE MENU  
Buttons on the Remote Control used for  
During playback, press this button to display the  
Title menu.  
video playback  
DISC MENU  
TITLE MENU  
If your disc has a playlist, press the GREEN (B)  
POPUP  
0
button to go to the playlist.  
2
3
pOpUp MENU  
1
During playback, press this button to display the  
Popup menu.  
SUBTITLE  
HOME  
REPEAT  
Repeat playback  
3
1. During playback, press the REpEAT button  
playback related buttons  
1
on the remote control.  
The product does not play sound in Search, Slow,  
or Step mode.  
2. Press the ▲▼ buttons to select Off, Title,  
Chapter, All or Repeat A-B, and then press  
To return to normal speed playback, press the  
the  
button.  
v
button.  
6
Ğ
Repeat A-B  
Starts playback.  
6
1. Press the  
button at the point where you  
v
Stops playback.  
want repeat play to start (A).  
5
7
2. Press the  
button at the point where you  
v
Pauses playback.  
want repeat play to stop (B).  
During playback, press the  
or  
3
3. To return to normal play, press the REpEAT  
button.  
4
button again.  
Fast Motion  
play  
Each time you press the  
or  
4
3
4. Press the  
button.  
v
button, the playback speed will  
change.  
Depending on the disc, the screen may not  
display all repeat options.  
In pause mode, press the  
button.  
4
The screen may not display Chapter or  
Title immediately. Continue to press the  
▲▼ buttons until your choice is inside the  
applicable field.  
Slow  
Motion play Each time you press the  
button,  
4
the playback speed will change.  
In pause mode, press the  
Step Motion button.  
To return to normal play, press the REpEAT  
button again, press the ▲▼ buttons to  
7
play  
Each time you press the  
a new frame appears.  
button,  
7
select Off, and then press the  
button.  
v
The screen may not display Repeat A-B  
immediately. Continue to press the ▲▼  
buttons until Repeat A-B is inside the  
applicable field.  
During playback, press the  
or  
1
button.  
2
Skip Motion  
Each time you press the  
or  
1
play  
You must set point (B) at least 5 seconds of  
playing time after point (A).  
button, the disc moves to the  
2
previous or next chapter or file.  
26 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Using the TOOLS Menu  
Subtitle  
During playback, press the TOOLS button.  
Lets you set the desired subtitle language.  
Title  
Angle  
If there is more than one title on a disk or device,  
lets you move to or select a desired title.  
To view a scene from another angle. The Angle  
option displays the number of angles available to  
view (1/1, 1/2, 1/3, etc.).  
playing Time  
BONUSvIEW video  
BONUSvIEW Audio  
Lets you go to a specific playback point. Use the  
numeric buttons to input the playback point.  
Lets you set the desired Bonusview option.  
Repeat Mode  
Menu selections that appear only while a file  
Lets you repeat a specific title, chapter, or marked  
section.  
plays  
Full Screen  
Audio Sync  
Lets you set the desired full screen size. You  
can select Original, Mode1 (larger), and Mode2  
(largest).  
Lets you adjust the audio delay so that the audio  
syncs with the video. You can set the delay from  
0 to 300 milliseconds.  
Information  
picture Settings  
Select to view video file information.  
Lets you set the picture mode.  
Mode  
Depending on the disc or storage device, the  
Tools menu may differ. All options may not be  
displayed.  
User : Lets you adjust the Brightness,  
Contrast, Color, and Sharpness functions  
-
manually.  
dynamic : Choose this setting to increase  
sharpness.  
-
Creating a video playlist  
You can create a playlist of video files in a way that  
is nearly identical to the way you create a playlist of  
Normal : Choose this setting for most viewing  
applications.  
Movie : This is the best setting for watching  
movies.  
-
-
Playing a Pre-Recorded Commercial  
Audio Disc  
Menu selections that appear only when a  
Bd/dvd disc plays  
1. Insert an Audio CD (CD-DA) or an MP3 Disc  
into the disc tray.  
Chapter  
For an Audio CD (CD-DA), the first track will  
be played automatically. Tracks on a disc  
are played in the order in which they were  
recorded on the disc.  
Lets you move to a chapter that you want to  
watch.  
Audio  
For an MP3 disc, press the ◀▶ buttons to  
select Music, then press the  
button.  
v
Lets you set the desired audio language.  
27 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing Content  
Fast play (Audio Cd [Cd-dA] only) :  
Tools  
During playback, press the  
button.  
or  
3
4
TRACK 001  
Repeat Mode  
Rip  
Track  
4
Each time you press the  
or  
button,  
3
4
> Move < Adjust ' Return  
the playback speed will change.  
TRACK 003  
04:41  
04:02  
03:43  
03:40  
button : Pauses a track.  
TRACK 004  
TRACK 005  
TRACK 006  
5
6
7
00:00/00:00  
button : Plays the currently selected  
6
track.  
CD  
" Pause  
c Select  
Tools  
' Return  
Repeating Tracks  
You can set the product to repeat tracks.  
2. To play a particular track, use the ▲▼ buttons  
1. During music playback, press the TOOLS  
on the remote to select the track, and then  
button.  
press the  
button.  
v
2. Use ◀▶ button to select Off, Track or One, All  
For more information about playing music, see  
Controlling Music Playback below.  
or Shuffle in Repeat Mode, and then press the  
button.  
v
Controlling Music Playback  
Creating a Music playlist  
1. If playing music from a commercial CD or DVD,  
You can control the playback of music content  
located on a DVD, CD, USB, mobile device, or PC.  
Depending on the disc or contents, some of the  
functions described in this manual may not be  
available.  
press the  
or RETURN button. The Music List  
5
Screen appears. If you are creating a playlist  
from music on a user created disk or USB  
device, access the Music list as described on  
Buttons on the Remote Control used for  
Music playback  
2. Press the ▲▼◀▶ buttons to move to a desired  
file, and then press the yELLOW (C) button  
to select it. Repeat this procedure to select  
additional files.  
1
4
2
5
8
0
3
6
3. If you want to select all files, press the TOOLS  
1
button, use the ▲▼ buttons to select Select All,  
and then press  
. If you want to deselect all  
v
7
9
files, press the TOOLS button, select deselect  
DISC MENU  
TITLE MENU  
POPUP  
All, and then press  
.
v
4
Music TRACK 001  
1 files selected 1/2 Page  
2
3
5
6
TRACK 001  
05:57  
TRACK 002  
04:27  
TRACK 003  
04:07  
TRACK 004  
03:41  
TRACK 005  
03:17  
TRACK 006  
03:35  
Number buttons : During Playlist playback,  
press the desired track number. The  
selected track is played.  
1
TRACK 007  
03:47  
TRACK 008  
03:49  
TRACK 009  
03:53  
TRACK 010  
03:45  
Skip : During playback, press the  
or  
1
2
button to move to the previous or next  
music track.  
2
3
CD a Change Device  
c Select  
Tools () Jump Page ' Return  
button : Stops a track.  
5
28 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Ripping encodes music in the .mp3 format at  
192kbps.  
4. To remove a file from the playlist, move to the  
file, and then press the yELLOW (C) button.  
On the Track list screen, you can choose Select  
All or deselect All.  
5. Press the  
button to play the selected files.  
v
The playlist screen appears.  
Use Select All to select all tracks, and then  
-
6. To go to the Music List, press the  
or RETURN  
5
press the  
button. This cancels your  
v
button.  
individual track selections.  
7. To go back to the playlist, press the  
button.  
v
Use deselect All to deselect all selected tracks  
at once.  
-
You can create a playlist with up to 99 tracks  
on Audio CDs (CD-DA).  
If you go to the Music List from the playlist,  
and then return to the playlist, the playlist will  
start playing again from the beginning.  
Playing Photo Contents  
You can play photo contents located on a DVD, USB,  
mobile device, or PC.  
Ripping  
Using the Tools Menu  
During playback, press the TOOLS button.  
1. Insert a USB device into the USB jack on the  
front of the product.  
2. With the Playback screen displayed, use the  
▲▼ buttons to select a track, and then press  
the yELLOW (C) button. A check appears to the  
left of the track.  
Start / Stop Slide Show  
Select to play/pause the slide show.  
Slide Show Speed  
3. Repeat Step 2 to select and check additional  
tracks.  
Select to adjust the slide show speed.  
Background Music  
4. To remove a track from the list, move to the  
track, and then press the yELLOW (C) button  
again. The check on the track is removed.  
Select to listen to music while viewing a slide  
show.  
5. When done, press the TOOLS button.  
The Tools menu appears.  
Zoom  
6. Use the ▲▼ buttons to select Rip, and then  
press the  
button. The Rip screen appears.  
v
Select to enlarge the current picture.  
(Enlarge up to 4 times)  
7. Use the ▲▼ buttons to select the device to  
store the ripped files on, and then press the  
button.  
v
Rotate  
Do not disconnect the device while ripping is  
in progress.  
Select to rotate a picture. (This will rotate the  
picture either clockwise or counter clockwise.)  
8. If you want to cancel ripping, press the  
v
Information  
button and then select yes. Select No to  
continue ripping.  
Shows the picture information including the name  
and size, etc.  
9. When ripping is complete, the "Ripping is  
completed." message appears.  
10. Press the  
button to go back to the Playback  
v
screen.  
This function is not available for DTS Audio  
CDs.  
This function may not be supported by some  
discs.  
29 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing Content  
Depending on the disc or storage device, the  
Tools menu may differ. All options may not be  
displayed.  
presetting Stations  
Example : Presetting FM 89.10 into memory.  
1. Press the FUNCTION button to select FM.  
To enable the background music function, the  
2. Press the TUNING Up, dOWN button to select  
photo file must be in the same storage media  
as the music file. However, the sound quality  
can be affected by the bitrate of the MP3  
file, the size of the photo, and the encoding  
method.  
<89.10>.  
3. Press the TUNER MEMORy button.  
NUMBER flashes on the display.  
4. Press the TUNER MEMORy button again.  
Press the TUNER MEMORy button before  
NUMBER disappears from the display on its  
own.  
Creating a photo playlist  
You can create a photo playlist in nearly the same  
instructions. Select photo files instead of music files.  
After you press the TUNER MEMORy button,  
NUMBER disappears from the display and the  
station is stored in memory.  
Listening to the Radio  
5. To preset another station, repeat steps 2 to 4.  
To tune in to a preset station, press the  
TUNING Up, dOWN button.  
To listen to the radio, you must connect the  
supplied FM antenna.  
Using Bluetooth  
Operating the Radio with the Remote  
Control  
You can use a Bluetooth device to enjoy music with  
high quality stereo sound, all without wires!  
1. Press the FUNCTION button to select FM.  
What is Bluetooth?  
2. Tune to the desired station.  
preset Tuning 1 : Press the  
select pRESET, and then press the TUNING  
Up, dOWN button to select a preset station.  
button to  
5
Bluetooth is a technology that enables Bluetooth-  
compliant devices to interconnect with each other  
easily using a short, wireless connection.  
- Before you can tune to preset stations, you  
must add preset stations to the product's  
memory.  
A Bluetooth device may hum or malfunction:  
When a part of your body is in contact with the  
receiving/transmitting system of the Bluetooth  
device or the Home Theater.  
-
Manual Tuning : Press the  
button to select  
5
MANUAL, and then press the TUNING Up,  
dOWN button to tune in to a lower or higher  
frequency.  
When it is subject to electrical variation from  
obstructions caused by a wall, corner, or office  
partitioning.  
-
Automatic Tuning : Press the  
button to  
5
When it is exposed to electrical interference  
-
select MANUAL, and then press and hold the  
TUNING Up, dOWN button to automatically  
search the band.  
from same frequency-band devices including  
medical equipment, microwave ovens, and  
wireless LANs.  
Pair the Home Theater with the Bluetooth device  
while the two are close together.  
Setting Mono/Stereo  
Press the MO/ST button.  
The further the distance is between the Home  
Theater and the Bluetooth device, the worse the  
quality is.  
Each time you press the button, the sound  
switches between STEREO and MONO.  
If the distance exceeds the Bluetooth operational  
range, the connection is lost.  
In a poor reception area, select MONO for a clear,  
interference-free broadcast.  
In poor reception-sensitivity areas, the Bluetooth  
connection may not work properly.  
30 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
The AVRCP feature is supported. It's  
functionality will differ, depending on the  
specifications of the connected device.  
The Home Theater has an effective reception  
range of up to 32.8 feet in all directions if  
there are no obstacles. The connection will be  
automatically cut off if the device is out of this  
range. Even within this range, the sound quality  
may be degraded by obstacles such as walls or  
doors.  
Connect only to a Bluetooth device that  
supports the A2DP Profile.  
Only one Bluetooth device can be paired at a  
time.  
This wireless device may cause electrical  
interference. during its operation.  
The search or connection functions may not  
work properly in the following cases:  
If there a strong electric field near or around  
the home theater.  
To Connect the Home Theater to a Bluetooth  
-
device  
If several Bluetooth devices are simultaneously  
paired with product.  
-
If the Bluetooth device is turned off, not in  
place, or malfunctions.  
-
Note that such devices as microwave ovens,  
-
Connect  
wireless LAN adapters, fluorescent lights, and  
gas stoves use the same frequency range as  
the Bluetooth device, and can cause electric  
interference.  
For the good compatibility of Bluetooth or any  
other devices like Mobile Phone, we recommend  
you update the device's lastest version.  
Bluetooth device  
Before you begin, confirm that the Bluetooth device  
supports the Bluetooth compliant stereo headset  
function.  
To disconnect the Bluetooth device from the  
Home Theater  
1. Press the FUNCTION button on the remote  
You can disconnect the Bluetooth device from  
the Home Theater. For instructions, refer to the  
Bluetooth device's manual.  
control to display the BT message.  
2. Select the Bluetooth menu on the Bluetooth  
device you want to connect. For instructions,  
refer to the Bluetooth device's manual.  
When the Home Theater is disconnected from the  
Bluetooth device, the Home Theater will display  
dISCONNECTEd on the front display.  
3. Select the Stereo headset menu on the  
Bluetooth device.  
To disconnect the Home Theater from the  
You will see a list of devices.  
Bluetooth device  
4. Select "[HTS]Hxxxxx" from the searched list.  
When the Home Theater is connected to the  
Press the (  
) button on the front panel of the  
Bluetooth device, the device name of the  
connected Bluetooth device, followed by the  
name of home theater will appear on the  
front display of home theater.  
Home Theater to switch from BT to another mode or  
turn off the Home Theater.  
Except when you disconnect the Home Theater  
by changing functions, the connected Bluetooth  
device will wait a certain time for a response  
from the Home Theater before terminating the  
connection. (Disconnection time may differ,  
depending on the Bluetooth device.)  
5. Play music on the connected device.  
You can listen to the music playing on the  
connected Bluetooth device over the Home  
Theater system.  
In Bluetooth connection mode, the Bluetooth  
The Home Theater only supports Middle  
Quality SBC data (up to 237kbps@48kHz),  
and does not support High Quality SBC data  
connection will be lost if the distance between  
the Home Theater System and the Bluetooth  
device exceeds 32.8 feet. When the Bluetooth  
device comes back into effective range or you  
restart the Bluetooth device, you have to pair the  
device and home theater again to reconnect.  
31 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing Content  
In Bluetooth mode, the screen saver will start  
4. Press the Tv SOUNd button again to turn  
if the Bluetooth device stays in the Ready state  
for 5 minutes. To reconnect the Bluetooth  
device, turn off the screen saver, and then  
connect the device. To turn off the screen  
saver, press any button on the remote control  
(the Volume button, a number button, etc.)  
TV SOUND off.  
When TV SOUND is off, TV audio outputs  
through the speakers of the connected  
Anynet+ TV.  
Ğ
Use Tv SOUNd:  
Using the Bluetooth power On  
When the home theater is turned off, connecting  
your smart device to the product via a Bluetooth  
connection can turn the home theater on.  
1) When you want to listen to the TV's audio  
through the home theater speakers.  
2) When you want to listen to the audio from  
a USB device plugged into the TV through  
the home theater speakers.  
Quick Start function is available when AC  
Power Cord is connected to AC Source.  
Ğ
Tv SOUNd ON/OFF support specifications:  
To use this function, set Settings > System >  
Quick Start to On.  
Anynet+  
To use this function, Bluetooth connection  
(HdMI-CEC)  
Setting  
Tv Sound ON  
Tv Sound OFF  
between the Home theater and your smart  
device should have been established before.  
In other words, the Home theater should  
be found from the list of known Bluetooth  
devices of your smart device.  
HTS Speaker  
Output  
HTS Speaker  
Mute  
ON  
TV Speaker  
Mute  
TV Speaker  
Output  
1. Connect your smart device to the product  
via Bluetooth. (For information on Bluetooth  
connections, refer to your smart device’s manual.)  
HTS Speaker  
Output  
HTS Speaker  
Mute  
2. Once connected, the home theater will turn  
OFF  
TV Speaker  
Output  
TV Speaker  
Output  
itself on automatically in BT mode.  
Select the desired music to play on your smart  
device.  
HTS Speaker  
Output  
HTS Speaker  
Mute  
No  
Operation  
Using the Special Effects Remote  
Control Buttons  
TV Speaker  
Output  
TV Speaker  
Output  
TV SOUND  
DSP/EQ  
Tv SOUNd  
dSp/EQ  
If you have a TV that supports Anynet+ (HDMI-  
CEC), the Tv SOUNd button lets you direct the  
TV's audio to the Home Theater Speakers or the  
TV Speakers. To use, follow these steps:  
You can enjoy various sound mode.  
z
dSpOFF : Select for normal listening.  
z
CINEMA : Reproduces realistic and powerful  
sound for movie sources.  
1. Connect an HDMI cable to the TV and home  
z
z
MUSIC : Suitable for whole music sources.  
GAME : Suited for playing video games and  
2. Set Anynet+ (HdMI-CEC) On in the home  
produces powerful sound.  
theater and TV.  
z
M-STEREO (Multi Stereo) : Produces surround  
3. Press the Tv SOUNd button on the remote  
control. Tv SOUNd ON flashes on the display  
on the front panel, and then changes to d. IN.  
sound for 2 channel input sources.  
z
z
pOWER BASS : Reinforce bass sound effect.  
LOUd : Improves bass sound characteristics  
according to output level.  
When TV SOUND is on, TV audio outputs  
through the Home Theater speakers.  
z
NIGHT : Optimizes to night by compress  
dynamic range (soft sound).  
32 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Network Services  
3. On your home theater, select Change device.  
Using BD-LIVE™  
4. Use the ▲▼ button to select your PC in the  
Device List.  
1. Connect the product to the network.  
5. Select the kind of file you want to view or play,  
photos, videos, or Music and then press  
.
v
2. Configure the network settings.  
6. Use the ▲▼◀▶ button to select the folder  
with the kind of files you selected, and then  
press  
. The File List is displayed.  
Once the product is connected to your network, you  
can enjoy various movie-related service contents  
available on BD-LIVE compliant discs.  
v
7. Select the file you want to view or play, and  
then press  
.
v
1. Attach a USB memory stick to the USB jack on  
the front of the product, and then use Bd data  
Management to check its remaining memory.  
The memory device must have at least 1GB  
of free space to accommodate the BD-LIVE  
services.  
You can create Playlists from files on your PC  
in the same way you create playlists from files  
on USB devices and discs.  
With a few exceptions, you can control the  
playback of files on your PC in the same  
fashion you control the playback of files on  
USB devices and discs.  
2. Select Settings on the Home screen, and then  
press the  
button.  
v
You can also access files on your PC by first  
selecting photos, videos, or Music on the  
Home screen, and then selecting your PC from  
the device list that appears.  
3. Select System, and then press the  
button.  
v
4. Select Bd data Management, and then press  
the button.  
v
5. Select Change device, and then press the  
v
button.  
Apps  
6. Select USB dISk, and then press the  
button.  
v
Your home theater offers an extensive collection  
of news, movies, weather, and other content you  
can download directly to and enjoy on your home  
theater. First, check the network and make sure the  
home theater is connected to the Internet. Your  
home theater must be connected to the Internet to  
use the Apps feature.  
7. Insert a Blu-ray Disc that supports BD-LIVE.  
8. Select an item from the list of BD-LIVE service  
contents provided by the disc manufacturer.  
The way you use BD-LIVE and the provided  
contents may differ, depending on the disc  
manufacturer.  
The apps offered through the Apps feature work  
much like their on-line versions or, if different, are  
easy to use.  
Using DLNA  
The apps require you to create accounts before you  
can use them. Although you can create an account  
at most of these sites through your home theater, it  
is easier and quicker to create an account by visiting  
the sites on line using a PC, laptop, or tablet with  
Internet access. Note that in some cases, you will  
need to use the home theater and a PC, laptop, or  
tablet to establish an account. The main difference  
between the regular on-line versions and the  
versions you can access through your home theater  
is that with the home theater versions, you use your  
remote to enter letters and numbers as opposed to a  
keyboard.  
DLNA lets you access and play files located on your  
PC through your home theater.  
Follow the directions in the DLNA user's guide to set  
up DLNA on your PC and to tag folders and files you  
want to share with the home theater.  
To access and play files located on your PC after you  
have setup DLNA, follow these steps:  
1. Turn on your PC, your TV, and the home  
theater.  
2. Make sure the DLNA Shared server is running  
on your PC.  
33 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Network Services  
Using Apps  
Using Opera TV Store  
The first time you access any one of the apps, the  
home theater displays two agreements. You must  
accept both agreements to download and use any  
apps.  
At the Opera Tv Store, you will find high-quality  
Internet video streaming, social network, and music  
streaming services.  
By default, the home theater displays four popular  
apps on the Home screen. You can view more apps  
and change the apps the home theater displays on  
the Home screen by selecting the More button.  
Accessing Opera Tv Store  
To access Opera Tv Store, select the Opera Tv Store  
button on the Home screen, and then press the  
button.  
v
To start an app, highlight the app, double click it,  
and then follow the directions displayed on the  
screen.  
To exit the Opera Tv Store screen, press the ExIT or  
RETURN button on your remote.  
viewing Additional Apps  
Navigating in Opera Tv Store  
When the Opera Tv Store screen appears, it displays  
a bank of assorted apps. Use the ▲▼◀▶ buttons on  
your remote to move the highlight from app to app.  
1. Select the More button on the Home screen,  
and then press the  
button. The More Apps  
v
screen appears displaying a bank of apps.  
2. To view additional apps, move the highlight  
to the right or left until another group of apps  
appears.  
Selecting an App  
Move the highlight to the app you want, and then  
press the  
button.  
v
3. To exit the More Apps screen, select Close or  
press the RETURN button or ExIT button on  
your remote.  
In the pop-up that appears, select OpEN to open the  
app immediately or Add TO My AppS to add the  
app to My Apps. Press the RETURN button on your  
remote to go back to the Opera Tv Store screen.  
Changing the Apps displayed on the Home  
Screen  
Selecting Apps by Category  
To make searching for apps easier, you can view apps  
by categories such as popular, Watch, Listen, play,  
etc.  
1. Select the More button, and then press the  
v
button.  
2. Select the Edit button on the More Apps screen,  
and then press the button.  
v
To select a category, use the ▲ button on your  
remote to move the highlight to the top of the  
screen.  
3. Apps that the home theater displays on the  
Home page are marked with a check. Deselect  
apps you want to remove from the Home  
screen by highlighting each app, and then  
Then, use the◀▶ buttons to select a category.  
pressing the  
button.  
v
Using the My Apps Screen  
4. Select apps by highlighting each app, and then  
pressing the button. A check mark appears  
To access the My Apps screen, highlight My AppS,  
v
and then press the  
button. The My Apps screen  
v
on each app you select. You can have up to  
four apps selected at a time.  
appears displaying all the apps you have saved with  
the My Apps designation.  
5. When done, select Ok, and then press the  
v
deleting Apps from My Apps  
button. The Home screen re-appears.  
To exit an application, press the ExIT button  
on your remote.  
1. Highlight the MENU button on the top of the  
My Apps screen, and then press the  
button  
v
on your remote.  
To delete the login information for all Apps,  
press the  
button for 5 seconds or more.  
2. Select REMOvE AppS in the menu, and then  
press the button. A red rectangle appears  
5
v
around one of the apps.  
3. Move the rectangle to the app you want to  
delete, and then press the  
button.  
v
34 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4. Repeat this process to delete additional apps.  
Bluetooth transmissions can interfere with  
the Screen Mirroring signal. Before using  
the Screen Mirroring function, we strongly  
recommend that you turn off the Bluetooth  
function on your smart phone or smart  
device.  
5. When finished, select dONE, and then press  
the  
button.  
v
6. Press the RETURN button to go back to the  
Main screen.  
Searching for Apps  
1. Select SEARCH at the top of the screen, and  
then press the  
button.  
v
2. To search quickly for popular items, click one  
of the popular search tabs at the top of the  
screen.  
3. To search for an app by name, enter the app  
name using the onscreen keyboard. Opera Tv  
Store will search as you type and display apps  
with names that match the letters you enter.  
To cancel a current search, press the RETURN  
button on your remote or select BACk on the  
screen, and then press  
.
v
Screen Mirroring  
Screen Mirroring lets you display the screen of a  
smart phone or other compatible device on the TV  
screen using Miracast™ technology. Manual Screen  
Mirroring does not require a cable or a wireless  
router.  
1. From the Home screen, use the ◀▶ buttons to  
select Screen Mirroring, and then press  
.
v
2. Launch AllShare Cast on your smart phone or  
device.  
3. On your device, find the name of the home  
theater system in the list of available devices,  
and then select it.  
4. The TV displays a connecting message (for  
example, Connecting to Android_92gb...) and  
then displays the connected message.  
5. In a few moments, the screen of your device  
appears on the TV screen.  
When you are using the Screen Mirroring  
function, video stuttering or audio dropouts  
may occur, depending on your environment.  
The Home Theater can connect to devices  
that support AllShare Cast. Note that all  
devices that have AllShare Cast may not  
be fully supported, depending on the  
manufacturer. For further information on  
mobile connection support, refer to the  
manufacturer’s web site.  
35 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Appendix  
digital Output  
Additional Information  
Be sure to select the correct digital Output or you  
will hear no sound or just loud noise.  
Notes  
If the HDMI device (AV receiver, TV) is not  
compatible with compressed formats (Dolby  
Digital, DTS), the audio signal outputs as PCM.  
Connections  
HdMI OUT  
Regular DVDs do not have BONUSVIEW audio and  
Navigation Sound Effects.  
Certain HDMI output resolutions may not work,  
depending on your TV.  
Some Blu-ray Discs do not have BONUSVIEW audio  
and Navigation Sound Effects.  
You must have an HDMI connection to enjoy  
videos with 3D technology.  
This digital Output setup does not affect the  
analog (L/R) audio or HDMI audio output to your  
TV. It affects the optical and HDMI audio output  
when your product is connected to an AV receiver.  
A long HDMI cable may cause screen noise. If this  
occurs, set HdMI deep Color to Off in the menu.  
If you play MPEG audio soundtracks, the audio  
signal outputs as PCM regardless of your digital  
Settings  
Output selections (PCM or Bitstream).  
3d Settings  
digital Output can be activated when Speaker  
Selection is set to Tv Speaker.  
For some 3D discs, to stop a movie during 3D  
playback, press the  
stops and the 3D mode option is de-activated.  
To change a 3D option selection when you are  
playing a 3D movie, press the  
Blu-ray menu appears. Press the  
button once. The movie  
5
Bd-Live Internet Connection  
The Internet connection may be restricted while  
button once. The  
5
you are using BD-LIVE contents.  
button again,  
5
then select 3d Settings in the Blu-ray menu.  
Anynet+ (HdMI-CEC)  
Depending on the content and the position of the  
picture on your TV screen, you may see vertical  
black bars on the left side, right side, or both sides.  
Depending on your TV, certain HDMI output  
resolutions may not work. Please refer to the user  
manual of your TV.  
Tv Aspect Ratio  
This function is not available if the HDMI cable  
does not support CEC.  
Depending on the disc type, some aspect ratios  
may not be available.  
If your Samsung TV has an Anynet+ logo, then it  
supports the Anynet+ function.  
If you select an aspect ratio and option which is  
different than the aspect ratio of your TV screen,  
the picture might appear to be distorted.  
Bd data Management  
If you select 16:9 Original, your TV may display 4:3  
pillarbox (black bars on the sides of the picture).  
In the external memory mode, disc playback may  
be stopped if you disconnect the USB device in the  
middle of playback.  
Bd Wise (Samsung products only)  
Only those USB devices formatted in the FAT file  
system (DOS 8.3 volume label) are supported.  
We recommend you use USB devices that support  
the USB 2.0 protocol with 4 MB/sec or faster  
read/write speeds.  
When Bd Wise is on, the Resolution setting  
automatically defaults to BD Wise and BD Wise  
appears in the Resolution menu.  
If the product is connected to a device that does  
not support Bd Wise, you cannot use the Bd Wise  
function.  
The Resume Play function may not work after you  
format the storage device.  
The total memory available to Bd data  
Management may differ, depending on conditions.  
For proper operation of Bd Wise, set the Bd Wise  
option in both the product and the TV to On.  
Speaker Settings  
When Speaker Selection is set to Tv Speaker, audio  
is produced by the TV speakers.  
36 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
playing Content  
HdMI audio  
Using the TOOLS button while playing pictures  
When HDMI audio is output to the TV speakers, it  
is automatically down-mixed to 2 channels.  
If the home theater is connected to a BD Wise  
compliant TV that has Bd Wise On, the picture  
Settings menu will not appear.  
Audio Return Channel  
When Anynet+ (HdMI-CEC) is Off, the Audio  
The Background Music function will not work  
Return Channel function is not available.  
unless the music file and the photo file are located  
on the same storage media. Also, sound quality  
can be impacted by the bitrate of the MP3 music  
file, the size of the photos, and the encoding  
method.  
Using an HDMI cable not certified for ARC (Audio  
Return Channel) may cause a compatibility  
problem.  
The ARC function is only available if an ARC-  
compliant TV is connected.  
playback  
Disk and Format Compatibility  
playing video files  
disc types and content your product can  
play  
Video files with high bitrates of 20Mbps or more  
strain the product’s capabilities and may stop  
playing during playback.  
Media  
disc Type  
details  
Selecting the Audio Language  
BD-ROM or BD-RE/-R disc  
recorded in the BD-RE  
format.  
Blu-ray Disc  
The ◀▶ indicator will not appear on the screen  
if the BONUSVIEW section does not contain any  
BONUSVIEW audio settings.  
3D Blu-ray Disc  
The languages available through the Audio  
DVD-VIDEO, recorded  
Language function depend on the languages that  
are encoded on the disc. This function or certain  
languages may not be available.  
DVD-VIDEO, DVD+RW/DVD-RW(V)/  
VIDEO  
DVD-RW,  
DVD-R,  
DVD-R/+R discs that  
have been recorded and  
finalized, or a USB storage  
media containing MKV,  
MP4 contents.  
Some Blu-ray Discs may allow you to select either  
the PCM or Dolby Digital audio English soundtrack.  
DVD+RW,  
DVD+R  
Selecting the Subtitle Language  
Music recorded on CD-  
RW/-R, DVD-RW/-R, BD-  
DVD-RW/-R, RE/-R discs or a USB  
Depending on the Blu-ray Disc / DVD, you may be  
able to change the subtitle language in the Disc  
Menu. Press the dISC MENU button.  
CD-RW/-R,  
MUSIC  
PHOTO  
BD-RE/-R  
storage media containing  
MP3 or WMA contents.  
This function depends on the selection of subtitles  
that are encoded on the disc and may not be  
available on all Blu-ray Discs/DVDs.  
Photos recorded on CD-  
RW/-R, DVD-RW/-R, BD-  
DVD-RW/-R, RE/-R discs or a USB  
CD-RW/-R,  
Information about the main feature BONUSVIEW  
mode will also appear if the Blu-ray Disc has a  
BONUSVIEW section.  
BD-RE/-R  
storage media containing  
JPEG contents.  
This function changes both the primary and  
secondary subtitles at the same time.  
The product may not play certain CD-RW/-R and  
DVD-R because of the disc type or recording  
conditions.  
The total number of primary and secondary  
subtitles, respectively, is displayed.  
If a DVD-RW/-R disc has not been recorded  
properly in DVD video format, it will not be  
playable.  
playing JpEG files  
You can’t enlarge the subtitle and PG graphics in  
the full screen mode.  
Your product will not play content that has been  
recorded on a DVD-R at a bitrate that exceeds 10  
Mbps.  
37 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix  
Your product will not play content that has been  
recorded on a BD-R or USB device at a bitrate that  
exceeds 30 Mbps.  
Logos of discs the product can play  
Playback may not work for some types of discs, or  
when you use specific operations, such as angle  
change and aspect ratio adjustment. Information  
about the discs is written in detail on the disc box.  
Please refer to this if necessary.  
Blu-ray Disc  
3D Blu-ray Disc  
When you play a BD-J title, loading may take longer  
than a normal title or some functions may perform  
slowly.  
disc Types your product cannot play  
BD-LIVE  
Dolby  
HD DVD  
DVD-RAM  
DVD-ROM/PD/MV-Disc,  
etc  
Super Audio CD  
(except CD layer)  
DVD-RW(VR mode)  
3.9 GB DVD-R Disc for  
Authoring.  
CVD/CD-ROM/CDV/CD-  
G/CD-I/LD  
DTS  
Java  
(CD-Gs play audio only,  
not graphics.)  
This product may not respond to all operating  
commands because some Blu-ray Disc, DVD, and  
CD discs allow specific or limited operation and  
provide only certain features during playback.  
Please note that this is not a defect in the  
product.  
NTSC broadcast system in  
U.S.A, Canada, Korea, Japan  
Samsung cannot guarantee that this product  
Region Code  
Both products and discs are coded by region. These  
regional codes must match for a disc to play. If the codes  
do not match, the disc will not play.  
The Region Number for this product is displayed on the  
rear panel of the product.  
will play every disc bearing the Blu-ray Disc,  
DVD, or CD logo because disc formats evolve,  
and problems and errors may occur during the  
creation of Blu-ray Disc, DVD, and CD software  
and/or the manufacture of discs.  
Please contact the SAMSUNG Customer Care  
Center at 1-800-726-7864 if you have questions  
or encounter difficulty when playing Blu-ray Discs,  
DVD, or CD discs in this product. Also, refer to the  
rest of this user manual for additional information  
on playback restrictions.  
Region  
Code  
disc Type  
Area  
North America, Central  
America, South America, Korea,  
Japan, Taiwan, Hong Kong and  
South East Asia.  
Some commercial discs and DVD discs purchased  
outside your region may not play on this product.  
A
Europe, Greenland, French  
territories, Middle East, Africa,  
Australia and New Zealand.  
Blu-ray  
disc  
b
C
India, China, Russia, Central  
and South Asia.  
38 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Some AVCHD format discs may not play,  
depending on the recording conditions.  
AVCHD format discs need to be finalized.  
The U.S., U.S. territories and  
Canada  
1
2
3
"x.v.Color" offers a wider color range than normal  
DVD camcorder discs.  
Europe, Japan, the Middle East,  
Egypt, Africa, Greenland  
Some MKV and MP4 format discs may not play,  
depending on their video resolution and frame  
rate.  
Taiwan, Korea, the Philippines,  
Indonesia, Hong Kong  
Supported Formats  
dvd-  
vIdEO  
Mexico, South America,  
Central America, Australia,  
New Zealand, Pacific Islands,  
Caribbean  
Notes on the USB connection  
Your product supports USB storage media, MP3  
4
players, digital cameras, and USB card readers.  
The product does not support folder or file names  
longer than 128 characters.  
Russia, Eastern Europe, India,  
North Korea, Mongolia  
Some USB/digital camera devices may not be  
compatible with the product.  
5
6
Your product supports the FAT 16, FAT 32, and NTFS  
file systems.  
China  
Connect USB devices directly to the product’s USB  
port. Connecting through a USB cable may cause  
compatibility problems.  
If the Region number of a Blu-ray Disc/DVD  
does not correspond to the Region number of  
this product, the product cannot play the disc.  
Inserting more than one memory device into a  
multi-card reader may cause the reader to operate  
improperly.  
The product does not support the PTP (Peer to Peer)  
protocol.  
AvCHd (Advanced video Codec High  
definition)  
Do not disconnect a USB device while it is transferring  
or recording data.  
This product can play back AVCHD format discs. These  
The bigger the image resolution, the longer the image  
takes to display.  
discs are normally recorded and used in camcorders.  
The AVCHD format is a high definition digital video  
This product cannot play MP3 files with DRM (Digital  
Rights Management) downloaded from commercial  
sites.  
camera format.  
The MPEG-4 AVC/H.264 format compresses images  
with greater efficiency than the conventional image  
compressing format.  
Your product only supports video that is under 30fps  
(frames per second).  
Some AVCHD discs use the "x.v.Color" format. This  
Your product only supports USB Mass Storage Class  
(MSC) devices such as thumb drives and USB HDD.  
(HUB is not supported.)  
product can play back AVCHD discs that use the  
"x.v.Color" format.  
"x.v.Color" is a trademark of Sony Corporation.  
Certain USB HDD Devices, multi-card readers and  
thumb drives may not be compatible with this  
product.  
"AVCHD" and the AVCHD logo are trademarks of  
Matsushita Electronic Industrial Co., Ltd. and Sony  
Corporation.  
If some USB devices require excessive power, they may  
be limited by the circuit safety device.  
If playback from a USB HDD is unstable, provide  
additional power by plugging the HDD into a wall  
socket. If the problem continues, contact the USB  
HDD manufacturer.  
SAMSUNG is not responsible for any data file damage  
or data loss.  
39 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix  
video File Support  
File Extension  
Container  
video Codec  
Audio Codec  
Resolution  
MP3, Dolby Digital, DTS,  
WMA, PCM  
MP4v3  
*.avi  
AVI  
H.264 BP/MP/HP  
VC-1 AP  
*.mkv  
*.wmv  
*.mp4  
MP3, Dolby Digital, DTS  
MKV  
H.264 BP/MP/HP  
VC-1 AP  
VC-1 SM  
WMV  
(wmv9)  
WMA  
AAC  
1920x1080  
MP4 (mp4v)  
MP4  
PS  
H.264 BP/MP/HP  
MPEG1  
MPEG2  
MP1, 2  
*.mpg /  
*.mpeg  
Dolby Digital, DTS  
H.264 BP/MP/HP  
Limitations  
`
Even when a file is encoded by a supported codec listed above, the file might not play if its content has a problem.  
Normal playback is not guaranteed if the file’s container information is wrong or the file itself is corrupted.  
Files having a higher bitrate/frame rate than standard may stutter during sound/video playback.  
The Seek (skip) function is not available if the file’s index table is damaged.  
-
-
-
-
video decoder  
`
Supports up to H.264 Level 4.1 and AVCHD  
-
-
-
Does not support H.264 FMO/ASO/RS and VC1 SP/MP/AP L4  
MPEG4 SP, ASP :  
Below 1280 x 720 : 60 frames max  
Above 1280 x 720 : 30 frames max  
Does not support GMC 2 or higher  
-
Audio decoder  
`
Supports WMA 7, 8, 9 and STD  
-
-
-
Does not support WMA sampling rate of 22050Hz mono.  
AAC: Max sampling rate: 96Khz (8, 11, 12, 16, 22,24, 32,44.1, 48, 64, 88.2, 96) Max bitrate: 320kbps  
Music File Support  
File Extension  
Container  
Audio Codec  
Support Range  
*.mp3  
MP3  
-
MP3  
* Sampling rates (in kHz) - 8, 11, 16, 22, 32, 44.1, 48  
* Bitrates - All bitrates from 5kbps to 384kbps  
*.wma  
WMA  
WMA  
picture File Support  
File Extension  
Type  
Resolution  
*.jpg / *.jpeg / *.jpe  
*.png  
JPEG  
PNG  
15360x8640  
40 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
digital Output Selections  
Bitstream  
(Re-encoded  
dolby d)  
Bitstream  
(Unprocessed)  
Bitstream  
(Re-encoded dTS)  
Setup  
pCM  
Connection  
PCM  
HdMI supported Av receiver  
Up to PCM 7.1ch  
Up to PCM 5.1ch  
PCM  
Dolby Digital  
Dolby Digital  
Dolby Digital  
Plus  
Up to PCM 5.1ch  
Dolby Digital Plus  
Dolby TrueHD  
Audio  
Stream on  
Blu-ray Disc  
Dolby TrueHD  
DTS  
Up to PCM 5.1ch  
Up to PCM 5.1ch  
Re-encoded  
Dolby Digital *  
DTS re-encoded  
DTS  
DTS-HD High  
Resolution  
Audio  
DTS-HD High  
Resolution Audio  
Up to PCM 5.1ch  
Up to PCM 5.1ch  
DTS-HD Master  
Audio  
DTS-HD Master  
Audio  
PCM  
Dolby Digital  
DTS  
PCM 2ch  
PCM 2ch  
Dolby Digital  
DTS  
PCM 2ch  
Dolby Digital  
DTS  
PCM 2ch  
Dolby Digital  
DTS  
Audio  
Stream on  
DVD  
Up to PCM 5.1ch  
Up to PCM 5.1ch  
Decodes the  
main feature  
audio and  
BONUSVIEW  
audio stream  
together into  
Outputs only the  
main feature audio  
stream so that your BONUSVIEW audio  
AV receiver can  
decode the audio  
bitstream.  
You will not hear  
BONUSVIEW audio  
or Navigation  
Decodes the main  
feature audio and  
Decodes the main  
feature audio and  
BONUSVIEW audio  
stream together  
into PCM audio and  
adds Navigation  
Sound Effects.  
stream together  
Definition  
for Blu-ray  
Disc  
into PCM audio and PCM audio and  
Any  
adds Navigation  
Sound Effects, then  
re-encodes the  
adds Navigation  
Sound Effects,  
then re-encodes  
PCM audio into DTS the PCM audio  
Sound Effects.  
bitstream.  
into Dolby  
Digital bitstream  
or PCM.  
If the Source Stream is 2ch or mono, "Re-encoded Dolby D" Setting are not applied. Output will be PCM 2ch.  
Blu-ray Discs may include three audio streams :  
Main Feature Audio : The audio soundtrack of the main feature.  
-
BONUSVIEW audio : An additional soundtrack such as the director or actor’s commentary.  
-
Navigation Sound Effects : When you choose some menu navigation options, Navigation Sound Effects may sound.  
Navigation Sound Effects are different on each Blu-ray Disc.  
-
41 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Appendix  
Resolution according to the output mode  
Blu-ray disc/E-contents/digital Contents playback  
HdMI Mode  
dvd playback  
Output  
HdMI Mode  
E-contents/  
Setup  
Blu-ray disc  
digital contents  
Resolution of Blu-ray  
Disc  
BD Wise  
1080p@60F  
480i  
Auto  
1080p@60F  
1080p  
Max. Resolution of TV input  
Max. Resolution of TV input  
1080p@60F  
-
-
1080p  
-
Movie Frame : Auto (24Fs)  
1080p@24F  
1080i  
1080i  
720p  
480p  
1080i  
720p  
480p  
720p  
480p  
Troubleshooting  
Refer to the table below when this product does not function properly. If the problem you are experiencing is not  
listed below or if the instructions below do not help, turn off the product, disconnect the power cord, and contact  
Samsung Electronics at 1-800-SAMSUNG (1-800-726-7864).  
Symptom  
Check/Remedy  
you cannot eject the disc.  
Is the power cord plugged securely into the outlet?  
Turn off the power, and then turn it back on.  
playback does not start.  
Check the region number of the Blu-ray/DVD disc.  
Blu-ray/DVD disc purchased from abroad may not be playable.  
CD-ROMs and DVD-ROMs cannot be played on this product.  
Make sure that the rating level is correct.  
playback does not start  
immediately when you press  
Are you using a deformed disc or a disc with scratches on the surface?  
Wipe the disc clean.  
the  
/
button.  
6 7  
No sound.  
The home theater does not play sound during fast playback, slow playback,  
and step motion playback.  
Are the speakers connected properly? Is the speaker setup correctly customized?  
Is the disc severely damaged?  
you can only hear sound  
from a few speakers, but not  
all 6.  
On certain Blu-ray/DVD discs, sound is output from the front speakers only.  
Check if the speakers are connected properly.  
Adjust the volume.  
When playing audio from a CD, the radio, or a TV, the unit outputs sound to the  
front speakers only.  
42 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Symptom  
Check/Remedy  
dolby digital 5.1 CH  
Surround Sound is not  
produced.  
Is there "Dolby Digital 5.1 CH" mark on the disc? Dolby Digital 5.1 CH Surround  
Sound is produced only if the disc is recorded with 5.1 channel sound.  
Is the audio language correctly set to Dolby Digital 5.1-CH in the information  
display?  
The remote control does not  
work.  
Are you operating the remote within its operational range and within the proper  
angle relative to the sensor?  
Are the batteries drained?  
Have you selected the mode (TV/BD) functions of the remote control (TV or BD)  
correctly?  
The disc is rotating but  
there is no picture.  
Is the TV power on?  
Are the video cables connected properly?  
Is the disc dirty or damaged?  
picture quality is poor and  
the picture is shaking.  
A poorly manufactured disc may not be playable.  
Audio language and subtitles  
do not work.  
The Audio Language and subtitle functions will not work if the disc does not  
contain multiple language sound tracks or subtitles.  
The menu screen does not  
appear even when you select  
the menu function.  
Are you using a disc that does not contain menus?  
The aspect ratio cannot be  
changed.  
You can play 16:9 Blu-ray/DVD discs in 16:9 Full mode, 4:3 Letter Box mode,  
or 4:3 Pan-Scan mode, but 4:3 Blu-ray/DVD discs are played in 4:3 mode only.  
Refer to the Blu-ray Disc jacket, and then select the appropriate function.  
The product is not  
Press and hold the remote control's  
This will reset the unit.  
button for 5 seconds in STANDBY mode.  
5
working.  
(Example: The power goes  
off or you hear a strange  
noise.)  
Using the RESET function will erase all stored settings.  
Do not use this function unless necessary.  
-
The product is not  
working normally.  
you have forgotten the  
With no disc in the product, press and hold the product's  
button for longer  
5
rating level password.  
than 5 seconds. INIT appears on the display and all settings will return to their  
default values.  
Using the RESET function will erase all stored settings.  
Do not use this function unless necessary.  
-
Can't receive radio  
broadcasts.  
Is the antenna connected properly?  
If the antenna's input signal is weak, install an external FM antenna in an area  
with good reception.  
There is no sound when  
you try to listen to Tv audio  
through the home theater  
speakers.  
If you press the button while listening to TV audio using the d. IN or AUx  
functions, the Blu-ray/DVD disc functions are turned on and the TV audio is  
muted.  
^
"Not Available" appears on  
screen.  
The features or action cannot be completed at this time because:  
1. The Blu-ray/DVD disc's software restricts it.  
2. The Blu-ray/DVD disc's software doesn’t support the feature (e.g., angles)  
3. The feature is not available at the moment.  
4. You’ve requested a title or chapter number or search time that is out of range.  
43 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix  
Symptom  
Check/Remedy  
If the HdMI output is set to  
a resolution your Tv cannot  
support (for example,  
Press and hold the  
disc in the product. All settings will revert to their factory settings.  
button on front panel for more than 5 seconds with no  
5
1080p), you may not see a  
picture on your Tv.  
No HdMI output.  
Check the connection between the TV and the HDMI jack of the product.  
Check if your TV supports 480p/720p/1080i/1080p HDMI input resolution.  
Abnormal HdMI output  
appears on the screen.  
If random noise appears on the screen, it means that TV does not support HDCP  
(High-bandwidth Digital Content Protection).  
dLNA function  
you can see folders shared  
through dLNA, but cannot  
see the files.  
DLNA shows only Photo, Music, and Movie files. It does not display other kinds  
of files.  
video plays intermittently.  
Check if the network is stable.  
Check if the network cable is properly connected and if the network is  
overloaded.  
The dLNA connection  
between the Tv and pC is  
unstable.  
IP addresses under the same subnetwork should be unique, otherwise IP collision  
can cause an unstable connection.  
Check if you have a firewall enabled.  
If so, disable the firewall function.  
Bd-LIvE  
The home theater cannot  
connect to the Bd-LIvE  
server.  
Test whether the network connection is active by using the Network Status  
function.  
Check whether a USB memory device is connected to the product.  
The memory device must have at least 1GB of free space to accommodate the  
BD-LIVE service.  
You can check the available size in Bd data Management. (See page 36)  
See if the Bd-Live Internet Connection option is set to Allow(All).  
If all above fails, contact the contents provider or update to the latest firmware.  
When using the Bd-LIvE  
service, an error occurs.  
The USB memory device must have at least 1GB of free space to accommodate  
the BD-LIVE service.  
You can check the available size in Bd data Management. (See page 36)  
When the factory default settings are restored, all stored user BD data is deleted.  
Repairs  
If you contact us to repair your product, an administration fee may be charged if either:  
1. An engineer is called out to your home at your request and there is no defect in the product.  
2. You bring the unit to a repair center and there is no defect in the product.  
We will provide you with the amount of the administration fee before we make a home visit or begin any work on  
your product.  
com, or contact Samsung Customer Care at 1-800-SAMSUNG (726-7864) before seeking to repair your product.  
44 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Power Requirements  
AC 110-120V ~ 50/60Hz  
Power Consumption  
Weight  
47 W  
4.19 Ibs  
General  
Dimensions  
16.9 (W) x 2.1 (H) x 8.8 (D) inches  
Operating Temperature Range  
Operating Humidity Range  
Signal/noise ratio  
+41°F to +95°F  
10 % to 75 %  
55 dB  
FM Tuner Usable sensitivity  
Total harmonic distortion  
12 dB  
1.0 %  
Video  
1080p, 1080i, 720p, 480p  
HDMI  
Audio  
PCM multichannel audio, Bitstream audio, PCM audio  
Front speaker output  
Center speaker output  
Surround speaker output  
Subwoofer speaker output  
165W x 2 (3Ω)  
170W (3Ω)  
165W x 2 (3Ω)  
170W (3Ω)  
Amplifier  
Analog input : 20Hz~20kHz (±3dB)  
Digital input : 20Hz~40kHz (±4dB)  
70dB  
Frequency response  
S/N Ratio  
Channel separation  
Input sensitivity  
60dB  
(AUX) 500mV  
Speaker (5.1ch speaker system)  
Speaker  
system  
Dimensions  
Output sound Rated Maximum  
Weights  
(Ibs)  
Impedance  
3 Ω  
Frequency range  
pressure level input  
input  
(W x H x D) (inches)  
Front  
Surround  
Center  
3.7 x 5.8 x 2.9  
3.7 x 4.6 x 2.9  
8.9 x 3.7 x 2.9  
6.7 x 13.8 x 11.3  
0.96  
0.88  
1.24  
7.52  
165W  
84dB/W/M  
330W  
200Hz ~ 20kHz  
50Hz ~ 200Hz  
170W  
340W  
Subwoofer  
Samsung Electronics Co., Ltd reserves the right to change the specifications without notice.  
Weight and dimensions are approximate.  
Design and specifications are subject to change without prior notice.  
Dispose of unwanted electronics through an approved recycler.  
278 - 0799  
Ğ
SWA-6000  
Operating Temperature  
Range  
+41°F to +95°F  
10% ~ 75%  
Power Requirements  
Power Consumption  
Weight  
AC 120V ~60Hz  
50 W  
Operating Humidity  
Range  
2.52 lbs  
Output  
165W x 2 CH  
20Hz~20KHz  
65dB  
Dimensions (W x H x D)  
3.0 x 9.0 x 6.0 inches  
Frequency range  
S/N Ratio  
45 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix  
Licenses  
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are  
trademarks of Dolby Laboratories.  
DTS Licensing Limited. DTS, DTSHD, the Symbol, & DTS and the Symbol together  
are registered trademarks, and DTS-HD Master Audio | Essential is a trademark of  
DTS, Inc. © DTS, Inc. All Rights Reserved.  
DLNA®, the DLNA Logo and DLNA CERTIFIED® are trademarks, service marks, or  
certification marks of the Digital Living Network Alliance.  
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are  
trademarks or registered trademarks of HDMI Licensing LLC in the United States and other  
countries.  
Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks  
of their respective owners.  
This item incorporates copy protection technology that is protected by U.S. patents and other intellectual property  
rights of Rovi Corporation. Reverse engineering and disassembly are prohibited.  
Blu-ray Disc™, Blu-ray™, and the logos are trademarks of Blu-ray Disc Association.  
This product uses Cinavia technology to limit the use of unauthorized copies of some commercially-produced film  
and videos and their soundtracks. When a prohibited use of an unauthorized copy is detected, a message will be  
displayed and playback or copying will be interrupted.  
More information about Cinavia technology is provided at the Cinavia Online Consumer Information Center at  
http://www.cinavia.com. To request additional information about Cinavia by mail, send a postcard with your mailing  
address to: Cinavia Consumer Information Center, P.O. Box 86851, San Diego, CA, 92138, USA."  
This product incorporates proprietary technology under license from Verance Corporation and is protected by U.S.  
Patent 7,369,677 and other U.S. and worldwide patents issued and pending as well as copyright and trade secret  
protection for certain aspects of such technology. Cinavia is a trademark of Verance Corporation. Copyright 2004-  
2010 Verance Corporation. All rights reserved by Verance. Reverse engineering or disassembly is prohibited.  
- Open Source License Notice  
In the case of using open source software, Open Source Licenses are available on the product menu.  
46 - English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LIMITED WARRANTY TO ORIGINAL PURCHASER  
This SAMSUNG brand product, as supplied and distributed by SAMSUNG and delivered new, in the original carton  
to the original consumer purchaser, is warranted by SAMSUNG against manufacturing defects in materials and  
workmanship for a limited warranty period of:  
One (1) year parts and Labor*  
(*90 days parts and Labor for Commercial Use)  
This limited warranty begins on the original date of purchase, and is valid only on products purchased and used in  
the United States. To receive warranty service, the purchaser must contact SAMSUNG for problem determination and  
service procedures. Warranty service can only be performed by a SAMSUNG authorized service center. The original  
dated bill of sale must be presented upon request as proof of purchase to SAMSUNG or SAMSUNG's authorized  
service center. Transportation of the product to and from the service center is the responsibility of the purchaser.  
SAMSUNG will repair or replace this product, at our option and at no charge as stipulated herein, with new or  
reconditioned parts or products if found to be defective during the limited warranty period specified above. All  
replaced parts and products become the property of SAMSUNG and must be returned to SAMSUNG. Replacement  
parts and products assume the remaining original warranty, or ninety (90) days, whichever is longer.  
SAMSUNG’s obligations with respect to software products distributed by SAMSUNG under the SAMSUNG brand  
name are set forth in the applicable end user license agreement. Non-SAMSUNG hardware and software products, if  
provided, are on an "AS IS" basis.  
Non-SAMSUNG manufacturers, suppliers, publishers, and service providers may provide their own warranties.  
This limited warranty covers manufacturing defects in materials and workmanship encountered in normal, and except  
to the extent otherwise expressly provided for in this statement, noncommercial use of this product, and shall not  
apply to the following, including, but not limited to: damage which occurs in shipment; delivery and installation;  
applications and uses for which this product was not intended; altered product or serial numbers; cosmetic damage  
or exterior finish; accidents, abuse, neglect, fire, water, lightning or other acts of nature; use of products, equipment,  
systems, utilities, services, parts, supplies, accessories, applications, installations, repairs, external wiring or connectors  
not supplied and authorized by SAMSUNG, or which damage this product or result in service problems; incorrect  
electrical line voltage, fluctuations and surges; customer adjustments and failure to follow operating instructions,  
cleaning, maintenance and environmental instructions that are covered and prescribed in the instruction book;  
product removal or reinstallation; reception problems and distortion related to noise, echo, interference or other signal  
transmission and delivery problems. SAMSUNG does not warrant uninterrupted or error-free operation of the product.  
THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED AND DESCRIBED ABOVE, AND NO  
WARRANTIES WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES  
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, SHALL APPLY AFTER THE EXPRESS WARRANTY  
PERIODS STATED ABOVE, AND NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR  
CORPORATION WITH RESPECT TO THIS PRODUCT SHALL BE BINDING ON SAMSUNG. SAMSUNG SHALL NOT BE  
LIABLE FOR LOSS OF REVENUE OR PROFITS, FAILURE TO REALIZE SAVINGS OR OTHER BENEFITS, OR ANY OTHER  
SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE OR INABILITY TO USE THIS  
PRODUCT, REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF SAMSUNG HAS  
BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST SAMSUNG  
BE GREATER IN AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCT SOLD BY SAMSUNG AND CAUSING THE  
ALLEGED DAMAGE. WITHOUT LIMITING THE FOREGOING, PURCHASER ASSUMES ALL RISK AND LIABILITY FOR  
LOSS, DAMAGE OR INJURY TO PURCHASER AND PURCHASER’S PROPERTY AND TO OTHERS AND THEIR PROPERTY  
ARISING OUT OF THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT SOLD BY SAMSUNG NOT CAUSED DIRECTLY  
BY THE NEGLIGENCE OF SAMSUNG. THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE  
ORIGINAL PURCHASER OF THIS PRODUCT, IS NONTRANSFERABLE AND STATES YOUR EXCLUSIVE REMEDY.  
Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental  
or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you  
specific legal rights, and you may also have other rights which vary from state to state.  
To obtain warranty service, please contact SAMSUNG customer care center.  
The benefits of this Limited Warranty extend only to the original purchaser of Samsung products from an authorized  
Samsung reseller. THIS LIMITED WARRANTY SHALL NOT APPLY TO ANY SAMSUNG PRODUCTS PURCHASED  
FROM UNAUTHORIZED RESELLERS OR RETAILERS, EXCEPT IN STATES WHERE SUCH RESTRICTION MAY BE  
PROHIBITED. For a list of Samsung authorized retailers, please go to: http://www.samsung.com/us/peaceofmind/  
authorized_resellers.html.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
QUESTIONS OR COMMENTS?  
COUNTRy  
CALL  
OR vISIT US ONLINE AT  
WRITE  
Samsung Electronics America, Inc. 85  
Challenger Road Ridgefield Park, NJ  
07660  
(726-7864) support  
IN THE US  
© 2014 Samsung Electronics Co., Ltd. All rights reserved.  
AH68-02673A-00  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Q Logic Computer Hardware 4010 User Guide
Reebok Stud Sensor RBMC11980 User Guide
Ricoh Digital Camera 15530 User Guide
Rosen Entertainment Systems GPS Receiver GM series User Guide
Ryobi Blower RY09605 User Guide
Samsung DVD Player AK68 01477B User Guide
Sanyo Digital Camera VPC AZ3 User Guide
Sea Frost Refrigerator DC 5000 User Guide
Sears Lawn Mower Accessory 917249391 User Guide
Sennheiser Headphones C 2 1 User Guide