Samsung Home Theater System HT F5500W User Guide

HT-F5500W  
5.1CH Blu-ray™  
Home Entertainment System  
user manual  
imagine the possibilities  
Thank you for purchasing this Samsung product.  
To receive more complete service,  
please register your product at  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Precautions  
Disc Storage & Management  
• Holding Discs  
Important Safety Instructions  
-
Fingerprints or scratches on  
a disc may reduce sound and picture  
quality or cause skipping.  
Read these operating instructions carefully before using  
the unit. Follow all the safety instructions listed below.  
Keep these operating instructions handy for future  
reference.  
-
-
-
Avoid touching the surface of a disc where data has  
been recorded.  
Hold the disc by the edges so that fingerprints will  
not get on the surface.  
1.  
2.  
3.  
4.  
5.  
6.  
7.  
Read these instructions.  
Keep these instructions.  
Heed all warnings.  
Do not stick paper or tape on the disc.  
• Cleaning Discs  
Follow all instructions.  
-
If you get fingerprints or dirt on a disc,  
clean it with a mild detergent diluted in  
water and wipe with a soft cloth.  
Do not use this apparatus near water.  
Clean only with a dry cloth.  
-
-
When cleaning, wipe gently from the  
inside to the outside of the disc.  
Do not block any ventilation openings. Install in  
accordance with the manufacturers instructions.  
Disc Storage  
8.  
Do not install near any heat sources such as  
radiators, heat registers, stoves, or other apparatus  
(including AV receivers) that produce heat.  
Do not keep in direct sunlight.  
Keep in a cool ventilated area.  
Keep in a clean protection jacket and store  
9.  
Do not defeat the safety purpose of the polarized  
or grounding-type plug. A polarized plug has two  
blades with one wider than the other. A grounding  
type plug has two blades and a third grounding  
prong. The wide blade or the third prong are  
provided for your safety. If the provided plug does  
not fit into your outlet, consult an electrician for  
replacement of the obsolete outlet.  
vertically.  
Handling Cautions  
• Do not expose this apparatus to dripping or splashing.  
Do not put objects filled with liquids, such as vases, on  
the apparatus.  
To turn this apparatus off completely, you must pull the  
power plug out of the wall socket. Consequently, the  
power plug must be easily and readily accessible at all  
times.  
10. Protect the power cord from being walked on  
or pinched particularly at plugs, convenience  
receptacles, and the point where it exits the  
apparatus.  
• Do not touch the power plug with a wet hand.  
It can cause an electric shock.  
11. Only use attachments/accessories specified by the  
manufacturer.  
• Do not plug multiple electric devices into the same wall  
socket. Overloading a socket can cause it to overheat,  
resulting in a fire.  
12. Use only with the cart, stand,  
tripod, bracket, or table  
specified by the manufacturer,  
or sold with the apparatus.  
When a cart is used, use  
• Before connecting other components to this product,  
be sure to turn them off.  
caution when moving the cart/  
apparatus combination to avoid  
injury from tip-over.  
• If you move your product suddenly from a cold place  
to a warm place, condensation may occur on the  
operating parts and lens and cause abnormal disc  
playback. If this occurs, unplug the product, wait for  
two hours, and then connect the plug to the power  
outlet. Then, insert the disc, and try to play back again.  
13. Unplug this apparatus during lightning storms or  
when unused for long periods of time.  
14. Refer all servicing to qualified service personnel.  
Servicing is required when the apparatus has been  
damaged in any way, such as when the power-  
supply cord or plug is damaged, liquid has been  
spilled or objects have fallen into the apparatus, the  
apparatus has been exposed to rain or moisture,  
does not operate normally, or has been dropped.  
|
English  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety Information  
• If the product makes an abnormal noise or produces  
a burning smell or smoke, turn off the power switch  
immediately and disconnect the power plug from  
the wall outlet. Then, contact the nearest customer  
service center for technical assistance. Do not use the  
product. Using the product as it is may cause a fire or  
an electric shock.  
This product uses Cinavia technology to limit the  
use of unauthorized copies of some commercially-  
produced film and videos and their soundtracks. When  
a prohibited use of an unauthorized copy is detected, a  
message will be displayed and playback or copying will  
be interrupted.  
More information about Cinavia technology is provided  
at the Cinavia Online Consumer Information Center  
at http://www.cinavia.com. To request additional  
information about Cinavia by mail, send a postcard with  
your mailing address to: Cinavia Consumer Information  
Center, P.O. Box 86851, San Diego, CA, 92138, USA.”  
This product incorporates proprietary technology  
under license from Verance Corporation and is  
protected by U.S. Patent 7,369,677 and other U.S.  
and worldwide patents issued and pending as well  
as copyright and trade secret protection for certain  
aspects of such technology. Cinavia is a trademark of  
Verance Corporation. Copyright 2004-2010 Verance  
Corporation. All rights reserved by Verance. Reverse  
engineering or disassembly is prohibited.  
License  
Manufactured under license  
from Dolby Laboratories.  
Dolby, Pro Logic, and  
the double-D symbol are  
trademarks of Dolby Laboratories.  
Manufactured under a license from U.S. Patent  
Nos: 5,956,674, 5,974,380, 5,978,762, 6,487,535,  
6,226,616, 7,212,872, 7,003,467, 7,272,567,  
7,668,723, 7,392,195, 7,930,184, 7,333,929 and  
7,548,853. DTS, DTS-HD, the Symbol, and DTS  
or DTS-HD and the Symbol together are registered  
trademarks & DTS Neo:Fusion is a trademark of DTS,  
Inc. ©2012 DTS, Inc. All Rights Reserved.  
- Open Source License Notice  
In the case of using open source software, Open  
Source Licenses are available on the product menu.  
Using the 3D Function  
IMPORTANT HEALTH AND SAFETY INFORMATION FOR  
3D PICTURES.  
The terms HDMI and HDMI  
High-Definition Multimedia  
Read and understand the following safety information  
before using the 3D function.  
Interface, and the HDMI  
• Some viewers may experience discomfort while viewing  
3D TV such as dizziness, nausea, and headaches.  
If you experience any such symptom, stop viewing 3D  
TV, remove the 3D Active Glasses, and rest.  
Logo are trademarks or registered trademarks of  
HDMI Licensing LLC in the United States and other  
countries.  
• Watching 3D images for an extended period of time  
may cause eye strain. If you feel eye strain, stop  
viewing 3D TV, remove your 3D Active Glasses, and  
rest.  
Oracle and Java are registered trademarks  
of Oracle and/or its affiliates. Other names  
may be trademarks of their respective  
owners.  
• A responsible adult should frequently check on children  
who are using the 3D function.  
If there are any reports of tired eyes, headaches,  
dizziness, or nausea, have the child stop viewing 3D  
TV and rest.  
This item incorporates copy protection technology  
that is protected by U.S. patents and other intellectual  
property rights of Rovi Corporation. Reverse engineering  
and disassembly are prohibited.  
• Do not use the 3D Active Glasses for other purposes  
(such as general eyeglasses, sunglasses, protective  
goggles, etc.)  
Blu-ray Disc™, Blu-ray™, and the logos are trademarks  
of Blu-ray Disc Association.  
• Do not use the 3D function or 3D Active Glasses while  
walking or moving around. Using the 3D function or 3D  
Active Glasses while moving around may cause you to  
bump into objects, trip, and/or fall, and cause serious  
injury.  
|
4
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
• If you want to enjoy 3D content, connect a 3D device  
(3D compliant AV receiver or TV) to the products HDMI  
OUT port using a high-speed HDMI cable. Put on 3D  
glasses before playing the 3D content.  
GETTING STARTED  
6
7
Disk and Format Compatibility  
Logos of Discs the Product can Play  
• The product outputs 3D signals only through HDMI  
cable connected to the HDMI OUT port.  
10 Accessories  
11 Front Panel  
11 Rear Panel  
• As the video resolution in 3D play mode is fixed  
according to the resolution of the original 3D video, you  
can not change the resolution to your preference.  
12 Remote Control  
• Some functions such as BD Wise, screen size  
adjustment, and resolution adjustment may not operate  
properly in 3D play mode.  
CONNECTIONS  
14 Connecting the Speakers  
You must use a high-speed HDMI cable for proper  
output of the 3D signal.  
16 Attaching the Toroidal Ferrite Core to the Power  
Cord of the Wireless Receiver Module (SWA-6000)  
• Stay at least three times the width of the screen from  
the TV when watching 3D images. For example, if you  
have a 46 inch screen, stay 138 inches (11.5 feet) from  
the screen.  
17 Connecting to TV/External Devices  
18 Connecting to a Network Router  
SETTINGS  
• Place the 3D video screen at eye level for the best 3D  
picture.  
19 The Initial Settings Procedure  
19 The Home Screen  
• When the product is connected to some 3D devices,  
the 3D effect may not function properly.  
19 Accessing the Settings Screen  
20 Settings Menu Functions  
24 Networks and the Internet  
27 Upgrading Software  
• This product does not convert 2D content into 3D.  
• “Blu-ray 3D” and “Blu-ray 3D” logo are trademarks of  
the Blu-ray Disc Association.  
MEDIA PLAY  
Copyright  
29 The All Content Screen  
© 2013 Samsung Electronics Co.,Ltd.  
29 Playing Commercial Discs  
All rights reserved; No part or whole of this users manual  
may be reproduced or copied without the prior written  
permission of Samsung Electronics Co.,Ltd.  
29 Playing Files on a USB Device  
30 Playing a Disc with User Recorded Content  
30 Using the AllShare Network Function  
31 Controlling Video Playback  
34 Controlling Music Playback  
38 Playing Photo Contents  
39 Listening to Radio  
39 Using the Special Effects Remote Control Buttons  
Contents  
NETWORK SERVICES  
41 Logging In to Your Samsung Account  
41 Before Using Movies & TV Shows or Apps  
42 Using Movies & TV Shows  
42 Using Apps  
SAFETY INFORMATION  
2
3
3
3
4
4
5
Warning  
Precautions  
Disc Storage & Management  
Handling Cautions  
License  
46 Screen Mirroring  
46 Using the Web Browser  
49 Linking your Internet Service Accounts to the Product  
Using the 3D Function  
Copyright  
49 BD-LIVE™  
APPENDIX  
50 Additional Information  
53 Troubleshooting  
56 Specifications  
|
English  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started  
Disk and Format Compatibility  
Disc types and content your Product can Play  
Media  
VIDEO  
Disc Type  
Details  
Blu-ray Disc  
BD-ROM or BD-RE/-R disc recorded in the BD-RE format.  
3D Blu-ray Disc  
DVD-VIDEO, DVD-RW,  
DVD-R, DVD+RW,  
DVD+R  
DVD-VIDEO, recorded DVD+RW/DVD-RW(V)/DVD-R/+R discs that have  
been recorded and finalized, or a USB storage media containing MKV,  
MP4 contents.  
CD-RW/-R,  
Music recorded on CD-RW/-R, DVD-RW/-R, BD-RE/-R discs or a USB  
storage media containing MP3 or WMA contents.  
DVD-RW/-R,  
MUSIC  
PHOTO  
BD-RE/-R  
CD-RW/-R,  
Photos recorded on CD-RW/-R, DVD-RW/-R, BD-RE/-R discs or a USB  
storage media containing JPEG contents.  
DVD-RW/-R,  
BD-RE/-R  
| NOTES |  
The product may not play certain CD-RW/-R and DVD-R because of the disc type or recording conditions.  
If a DVD-RW/-R disc has not been recorded properly in DVD video format, it will not be playable.  
Your product will not play content that has been recorded on a DVD-R at a bitrate that exceeds 10 Mbps.  
\
\
\
\
Your product will not play content that has been recorded on a BD-R or USB device at a bitrate that exceeds 30  
Mbps.  
Playback may not work for some types of discs, or when you use specific operations, such as angle change  
and aspect ratio adjustment. Information about the discs is written in detail on the disc box. Please refer to this if  
necessary.  
\
\
When you play a BD-J title, loading may take longer than a normal title or some functions may perform slowly.  
Disc Types your Product cannot Play  
• HD DVD  
• DVD-RAM  
• DVD-RW(VR mode)  
• 3.9 GB DVD-R Disc for  
Authoring.  
• DVD-ROM/PD/MV-Disc, • Super Audio CD  
• CVD/CD-ROM/CDV/  
CD-G/CD-I/LD  
etc  
(except CD layer)  
(CD-Gs play audio only,  
not graphics.)  
| NOTES |  
This product may not respond to all operating commands because some Blu-ray Disc, DVD, and CD discs allow  
specific or limited operation and provide only certain features during playback.  
\
\
\
\
Please note that this is not a defect in the product.  
Samsung cannot guarantee that this product will play every disc bearing the Blu-ray Disc, DVD or CD logo because  
disc formats evolve, and problems and errors may occur during the creation of Blu-ray Disc, DVD, and CD software  
and/or the manufacture of discs.  
Please contact the SAMSUNG Customer Care Center at 1-800-726-7864 if you have questions or encounter  
difficulty when playing Blu-ray Disc, DVD, or CD discs in this product. Also, refer to rest of this user manual for  
additional information on playback restrictions.  
Some commercial discs and DVD discs purchased outside your region may not play on this product.  
|
6
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Region Code  
Logos of Discs the Product can Play  
Both products and discs are coded by region. These  
regional codes must match for a disc to play. If the codes  
do not match, the disc will not play.  
The Region Number for this product is displayed on the  
rear panel of the product.  
Blu-ray Disc  
BD-LIVE  
3D Blu-ray Disc  
Dolby  
Region  
Disc Type  
Area  
Code  
North America, Central  
America, South America,  
Korea, Japan, Taiwan, Hong  
Kong and South East Asia.  
A
Blu-ray Disc  
Europe, Greenland, French  
territories, Middle East, Africa,  
Australia and New Zealand.  
B
India, China, Russia, Central  
and South Asia.  
C
1
2
3
DTS  
The U.S., U.S. territories and  
Canada  
Europe, Japan, the Middle  
East, Egypt, South Africa,  
Greenland  
Taiwan, Korea, the Philippines,  
Indonesia, Hong Kong  
NTSC broadcast system  
Java  
in U.S.A, Canada, Korea,  
Japan  
Mexico, South America,  
Central America, Australia,  
New Zealand, Pacific Islands,  
Caribbean  
DVD-VIDEO  
| NOTES |  
4
Russia, Eastern Europe, India,  
most of Africa, North Korea,  
Mongolia  
5
6
China  
If the Region number of a Blu-ray Disc/DVDs  
does not correspond to the Region number of this  
product, the product cannot play the disc.  
\
|
English  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started  
Supported Formats  
Video File Support  
File  
Frame rate  
(fps)  
Bitrate  
(Mbps)  
Container  
Video Codec  
Resolution  
Audio Codec  
Extension  
MPEG4 SP/ASP  
*.avi  
*.mkv  
*.asf  
H.264 BP/  
MP/HP  
AVI  
MKV  
ASF  
MP4  
3GP  
MOV  
FLV  
Dolby Digital  
LPCM  
*.wmv  
*.mp4  
*.3gp  
*.vro  
Motion JPEG  
1920x1080  
(WMV v7,v8,  
MSMPEG4 v3 :  
1280x720)  
ADPCM  
(IMA, MS)  
AAC  
Microsoft  
30  
MPEG-4 v3  
*.mpg  
6~30  
*.mpeg  
HE-AAC  
WMA  
Window Media  
*.ts  
*.tp  
*.trp  
VRO  
VOB  
PS  
Video v7, v8, v9  
Dolby Digital  
Plus  
MPEG2  
MPEG1  
VP6  
MVC  
VP8  
*.mov  
*.flv  
MPEG(MP3)  
DTS  
TS  
SVAF  
*.vob  
*.svi  
4
60  
20  
640x480  
*.m2ts  
24/25/30  
6~30  
-
*.webm  
Vorbis  
WebM  
1920x1080  
-
-
Supports SVAF Top/Bottom, Side by Side Only  
Supports BD MVC Spec Only  
Limitations  
-
Even when a file is encoded by a supported codec  
listed above, the file might not be played if its content  
is defective or corrupted.  
Audio decoder  
-
-
-
-
-
-
-
Supports WMA 10 Pro (Up to 5.1)  
Does not support WMA lossless audio.  
Supported ADPCM IMA, MS.  
-
-
-
-
Normal playback is not guaranteed if the file's container  
information is wrong or the file itself is corrupted.  
Files having higher bit or frame rates than standard  
may stutter when played back.  
Does not support ADPCM (A-Law, μ-Low)  
Does not support QCELP, AMR NB/WB  
Supports vorbis (Up to 2ch),  
The seek (skip) function is not available if the file's  
index table is damaged.  
When you playback a file remotely through a network  
connection, video playback may stutter depending on  
the network speed.  
Supports Dolby Digital Plus (Up to 7.1ch)  
Comments  
-
-
-
-
-
MPEG4 : Supports up to GMC 1-Warping Point.  
H.264 : Supports up to BP/MP/HP Level 4.1.  
WMV : Supports V9, VC1 SP/MP/AP L3.  
MPEG1 : Does not support D-picture.  
-
Some USB/Digital camera devices may not be  
compatible with the product.  
Video decoder  
-
Supports up to H.264 Level 4.1 (except for FMO/ASO/  
MPEG2 : Supports up to Hight Profile High Level.  
RS)  
-
-
Does not support VC1 AP L4  
| NOTES |  
Except for WMV v7, v8, MSMPEG4 v3, MVC, VP6  
Below 1280 X 720: 60 frame max  
Some MKV and MP4 format discs may not play,  
\
depending on their video resolution and frame rate.  
Above 1280 X 720: 30 frame max  
-
Does not support GMC 2 or higher  
|
8
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Music File Support  
Notes on the USB connection  
Your product supports USB storage media, MP3  
players, digital cameras, and USB card readers.  
File  
Audio  
Container  
Extension  
Support Range  
Codec  
• The product does not support folder or file names  
longer than 128 characters.  
MPEG1  
Audio  
• Some USB/digital camera devices may not be  
compatible with the product.  
*.mp3  
-
MP3  
Layer 3  
Your product supports the FAT 16, FAT 32, and NTFS  
file systems.  
*.m4a  
*.mpa  
*.aac  
• Connect USB devices directly to the products USB  
port. Connecting through a USB cable may cause  
compatibility problems.  
AAC  
-
MPEG4  
• Inserting more than one memory device into a  
multi-card reader may cause the reader to operate  
improperly.  
Supports up to  
2ch  
*.flac  
*.ogg  
FLAC  
FLAC  
OGG  
• The product does not support the PTP protocol.  
Supports up to  
2ch  
• Do not disconnect a USB device during a “loading”  
process.  
Vorbis  
• The bigger the image resolution, the longer the image  
takes to display.  
Supports WMA 10  
Pro (Up to 5.1)  
• This product cannot play MP3 files with DRM (Digital  
Rights Management) downloaded from commercial  
sites.  
Does not support  
WMA lossless  
audio  
*.wma  
*.wav  
WMA  
WMA  
Your product only supports video that is under 30fps  
(frame rate).  
Supports up to M2  
profile  
Your product only supports USB Mass Storage Class  
(MSC) devices such as thumb drives and USB HDD.  
(HUB is not supported.)  
Does not  
support LBR mode  
• Certain USB HDD Devices, multi-card readers and  
thumb drives may not be compatible with this product.  
wav  
midi  
-
wav  
midi  
• If some USB devices require excessive power, they  
may be limited by the circuit safety device.  
*.mid  
*.midi  
type 0 and type 1  
• If playback from a USB HDD is unstable, provide  
additional power by plugging the HDD into a wall  
socket. If the problem continues, contact the USB  
HDD manufacturer.  
Does not support  
X13, NVT  
*.ape  
ape  
ape  
• SAMSUNG is not responsible for any data file damage  
or data loss.  
Picture File Support  
File Extension  
AVCHD  
Type  
Resolution  
(Advanced Video Codec High Definition)  
*.jpg  
• This product can play back AVCHD format discs.  
These discs are normally recorded and used in  
camcorders.  
15360x8640  
JPEG  
*.jpeg  
*.png  
*.bmp  
*.mpo  
4096x4096  
4096x4096  
15360x8640  
PNG  
BMP  
MPO  
• The AVCHD format is a high definition digital video  
camera format.  
• The MPEG-4 AVC/H.264 format compresses images  
with greater efficiency than the conventional image  
compressing format.  
• Some AVCHD discs use the “x.v.Color” format. This  
product can play back AVCHD discs that use the  
“x.v.Color” format.  
|
English  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started  
• “x.v.Color” is a trademark of Sony Corporation.  
• “AVCHD” and the AVCHD logo are trademarks of  
Matsushita Electronic Industrial Co., Ltd. and Sony  
Corporation.  
| NOTES |  
Some AVCHD format discs may not play, depending  
\
on the recording conditions.  
AVCHD format discs need to be finalized.  
\
“x.v.Color” offers a wider color range than normal DVD  
\
camcorder discs.  
Some MKV and MP4 format discs may not play,  
\
depending on their video resolution and frame rate.  
Accessories  
Check for the supplied accessories below.  
FUNCTION  
TV  
SOURCE  
R
ECEIVER  
BD  
TV  
SLEEP  
1
2
5
8
0
3
6
9
4
7
D
I
S
T
I
T
L
U  
P
O
P
U
P
M
UTE  
T
U
/
N
C
I
H
N
G
T
V
SOUND  
VOL  
F
U
L
L
S
C
R
E
E
N
H
O
M
E
REPEAT  
TOOLS  
INFO  
EXIT  
RETURN  
A
ER  
M
E
M
O
R
Y
M
O
/
S
T
(For Power cord)  
B
C
D
SMART  
SEARCH  
S
/
W
L
E
V
E
L
3
D
S
O
U
ND  
HUB  
MANUAL  
A
U
D
I
O
S
U
B
T
IT  
L
E
SOUN  
D
PRESET  
EFFECT  
Remote Control  
(AH59-02538A)/  
Batteries (AAA size)  
(4301-000116)  
Toroidal Ferrite Core  
(3301-000144)  
Power Cable  
FM Antenna  
(AH42-00021A)  
(3903-000598)  
User Manual  
Soft Cloth  
(AH68-02575A)  
(BN63-02368B)  
Figures and illustrations in this User Manual  
are provided for reference only and may differ  
from actual product appearance.  
|
10  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Front Panel  
VOLUME CONTROL  
OPEN/CLOSE  
PLAY/PAUSE  
STOP  
FUNCTION  
DISC TRAY  
DISPLAY  
5V 0.5A  
REMOTE CONTROL SENSOR  
USB  
POWER  
| NOTES |  
When the product is on, do not let children touch the product's surface. It will be hot.  
To upgrade the product's software through the USB jack, you must use a USB flash drive.  
When the product displays the Blu-ray Disc menu, you cannot start the movie by pressing the  
\
\
\
button on the  
6
product or the remote. To play the movie, you must select Play Movie or Start in the disc menu, and then press the  
button.  
E
If you use the Internet service or play the USB device contents on the TV, you cannot select the BD/DVD mode with  
\
the FUNCTION button. Stop the playing contents on the TV first to select the BD/DVD mode.  
Rear Panel  
* FM ANTENNA  
COOLING FAN  
AUX IN  
HDMI OUT  
HDMI IN  
HDMI OUT  
HDMI IN  
SPEAKER OUTPUT  
CONNECTORS  
POWER CORD  
EXTERNAL DIGITAL  
LAN TERMINAL  
AUDIO IN (OPTICAL)  
* Connecting the FM Antenna  
1.  
2.  
Connect the FM antenna supplied to the FM ANT Jack.  
Slowly move the antenna wire around until you find a location where reception is good, then fasten it to a wall or  
other rigid surface.  
| NOTES |  
Maintain a minimum of 4 inches of clear space on all sides of the home theater to ensure adequate ventilation.  
\
\
Do not obstruct the cooling fan or ventilation holes.  
This product does not receive AM broadcasts.  
|
English  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started  
Remote Control  
Tour of the Remote Control  
Press to select the home theater's  
mode (HDMI, AUX, BD/DVD, etc.).  
Turn the product on and off.  
FUNCTION  
or  
TV  
SOURCE  
To change to Television mode  
and control the TV, press the TV  
button.  
Press to select TV's video mode.  
Set a Sleep time to shut off the  
RECEIVER  
product.  
To change to Home Theater mode  
and control the Home Theater,  
press the BD button.  
SLEEP  
BD  
TV  
Press to open and close the disc  
tray.  
1
4
2
5
8
0
3
6
Press numeric buttons to operate  
options.  
7
9
DISC MENU  
TITLE MENU  
Use to enter the Popup menu/Title  
menu.  
POPUP  
Press to view the disc menu.  
Press to search backwards or  
Press to skip backwards or  
forwards.  
forwards.  
Press to stop/play a disc.  
Press to pause a disc.  
Cut off the sound temporarily.  
MUTE  
Search for active FM stations and  
to change channels.  
Press to output the audio signal to  
the home theater speakers or the TV  
speaker. (See page 40)  
TUNING  
Adjust the volume.  
TV SOUND  
HOME  
VOL  
/
CH  
Press to move to the Home screen.  
FULL SCREEN  
REPEAT  
Press to see the full screen  
on a TV.  
Allows you to repeat a title,  
chapter, track or disc.  
TOOLS  
INFO  
EXIT  
Press to use the Tools menu.  
Use to display the playback  
information when playing  
a Blu-ray/DVD disc.  
Select on-screen menu items and  
change menu values.  
Press to exit the menu.  
RETURN  
A
Return to the previous menu.  
Use to set a preset radio frequency.  
TUNER  
MO/ST  
MEMORY  
These buttons are used both for  
menus on the product and also  
several Blu-ray Disc functions.  
B
C
D
Select MONO or STEREO for radio  
broadcasts.  
SMART  
SEARCH S/W LEVEL 3D SOUND  
HUB  
Press to use Smart Hub.  
MANUAL  
AUDIO  
SUBTITLE SOUND  
Press to apply the 3D sound effect.  
Press to apply sound effects.  
PRESET  
EFFECT  
Press to select MANUAL/  
PRESET in the Tuner function.  
Use to adjust the level of the  
Press to search contents.  
subwoofer.  
Selects the disc Audio language.  
Selects the disc subtitle language.  
|
12  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TV Control Codes  
Installing batteries in the Remote Control  
Brand  
Code  
56, 57, 58  
01, 15  
Brand  
Mitsubishi/MGA  
MTC  
Code  
Battery size: AAA  
18, 40, 59, 60, 75  
Admiral  
(M.Wards)  
18  
1
2
A Mark  
Anam  
AOC  
NEC  
18, 19, 20, 40, 59, 60  
01, 02, 03, 04, 05, 06, 07,  
Nikei  
03  
03  
03  
08, 09, 10, 11, 12, 13, 14  
Onking  
01, 18, 40, 48  
57, 58, 81  
Onwa  
Bell & Howell  
06, 07, 08, 09, 54, 66,  
67, 73, 74  
Panasonic  
Penney  
Philco  
(M.Wards)  
Brocsonic  
Candle  
59, 60  
18  
18  
| NOTES |  
03, 15, 17, 18, 48, 54,  
59, 62, 69, 90  
Cetronic  
Citizen  
03  
Make sure to match the “+” and “–” ends of the  
batteries with the diagram inside the compartment.  
Assuming typical TV usage, the batteries last for about  
one year.  
\
\
\
15, 17, 18, 40, 48, 54,  
62, 72  
03, 18, 25  
Philips  
Cinema  
Classic  
97  
Pioneer  
Portland  
Proton  
63, 66, 80, 91  
15, 18, 59  
03  
Concerto  
Contec  
Coronado  
Craig  
18  
The remote control can be used up to approximately  
23 feet (7 meters) from the product in a straight line.  
40  
46  
Quasar  
06, 66, 67  
15  
Radio Shack  
17, 48, 56, 60, 61, 75  
Setting up the Remote Control  
03, 05, 61, 82, 83, 84  
18, 59, 67, 76, 77, 78,  
92, 93, 94  
RCA/Proscan  
You can control certain functions of your TV with this  
remote control.  
Croslex  
Crown  
62  
03  
Realistic  
Sampo  
03, 19  
40  
To operate a TV with the Remote Control  
Curtis Mates  
CXC  
59, 61, 63  
03  
00, 15, 16, 17, 40, 43,  
46, 47, 48, 49,  
1. Press the TV button to set the remote control to TV  
Samsung  
mode.  
02, 03, 04, 15, 16, 17, 18,  
19, 20, 21, 22, 23, 24, 25,  
26, 27, 28, 29, 30, 32, 34,  
35, 36, 48, 59, 90  
59, 60, 98  
19, 61, 65  
Daewoo  
2.  
3.  
Turn on your TV.  
Sanyo  
Scott  
Sears  
Sharp  
While holding down the POWER button, enter the  
03, 40, 60, 61  
15, 18, 19  
Daytron  
Dynasty  
40  
03  
code corresponding to your brand of TV.  
• If there is more than one code listed for your TV in  
the table, enter one at a time to determine which  
code works.  
15, 57, 64  
03, 15, 40, 46, 59, 61, 64,  
Emerson  
Signature 2000  
82, 83, 84, 85  
57, 58  
(M.Wards)  
Fisher  
Funai  
19, 65  
03  
Example : For a Samsung TV  
Sony  
50, 51, 52, 53, 55  
While holding down the POWER button, use  
the number buttons to enter 00. If that does not  
work, try 15, then 16, etc.  
Soundesign  
Spectricon  
SSS  
03, 40  
01  
Futuretech  
03  
General Electric  
06, 40, 56, 59, 66, 67, 68  
18  
(GE)  
4.  
If the TV turns off, the setting is complete.  
18, 40, 48, 54, 59, 60,  
62  
Hall Mark  
Hitachi  
Inkel  
40  
15, 18, 50, 59, 69  
45  
Sylvania  
You can use the TV POWER, VOLUME,  
Symphonic  
Tatung  
61, 95, 96  
06  
CHANNEL, and Numeric buttons (0~9).  
JC Penny  
JVC  
56, 59, 67, 86  
70  
| NOTES |  
Techwood  
Teknika  
TMK  
18  
The remote may not be able to control some  
\
03, 15, 18, 25  
18, 40  
KTV  
59, 61, 87, 88  
03, 15, 40  
15  
functions, depending on your brand of TV. Also, the  
remote control may not work on some brands of TVs.  
The remote control will work with Samsung TVs by  
default.  
KEC  
Toshiba  
Vidtech  
Videch  
19, 57, 63, 71  
18  
\
KMC  
01, 15, 16, 17, 37, 38, 39,  
59, 60, 69  
LG (Goldstar)  
Luxman  
40, 41, 42, 43, 44  
15, 17, 18, 40, 48, 54,  
60, 64  
Wards  
18  
19, 54, 56, 59, 60, 62, 63,  
Yamaha  
York  
18  
40  
LXI (Sears)  
65, 71  
15, 17, 18, 48, 54, 59, 60,  
62, 72, 89  
Magnavox  
Yupiteru  
Zenith  
03  
58, 79  
01  
Marantz  
Matsui  
MGA  
40, 54  
54  
Zonda  
Dongyang  
03, 54  
18, 40  
|
English  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections  
This section describes various methods of connecting the product to other external components.  
Before moving or installing the product, be sure to turn off the power and disconnect the power cord.  
Connecting the Speakers  
Position of the product  
Place it on a stand or cabinet shelf, or  
under the TV stand.  
Front (R)  
Selecting the Listening Position  
Center  
Subwoofer  
The listening position should be located  
about 2.5 to 3 times the TV's screen  
size away from the TV. For example, if  
you have a 46 inch screen, locate the  
listening position 115 to 138 inches (9.6  
to11.5 feet) from the screen.  
Surround (R)  
Product  
Front (L)  
Surround (L)  
Wireless  
Receiver Module  
Place these speakers in front of your listening position, facing inwards (about 45°) toward you.  
Place the front speakers so that their tweeters will be at the same height as your ear. Align the  
front face of the front speakers with the front face of the center speaker or place them slightly  
in front of the center speakers.  
Front Speakers  
Center Speaker  
It is best to install the Center Speaker at the same height as the front speakers. You can also  
install it directly over or under the TV.  
Place these speakers to the side of your listening position. If there isn't enough room, place  
these speakers so they face each other. Position them about 2 to 3 feet (60 to 90cm) above  
your ear, facing slightly downward.  
Surround  
Speakers  
* Unlike the front and center speakers, the surround speakers are used mainly for sound  
effects. Sound will not come from them all the time.  
Subwoofer  
The position of the subwoofer is not so critical. Place it anywhere you like.  
* Surround speakers must be connected to the wireless receiver module.  
|
14  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Speaker Components  
SWA-6000  
Center  
Speaker  
Wireless Receiver  
Module  
Front x 2  
Surround x 2  
Speaker Cable x 3  
Subwoofer  
Cable x 2  
Connecting The Speakers  
1.  
2.  
Match each speaker cable bundle to the correct speaker by matching the color coded  
plug on each bundle to the colored sticker on the bottom of each speaker.  
To attach speaker wire to each speaker:  
a. Press down the red tab on the back of the speaker, insert the red wire, and then  
release the tab.  
Black  
Red  
b. Press down the black tab on the back of the speaker, insert the black wire, and then  
release the tab.  
3.  
Connect the speaker wire plugs from each speaker to the back of the product by  
matching the colors of the speaker plugs to the colors of the speaker jacks.  
4. Connect the left and right surround speakers to the wireless receiver module.  
Again, match the color of the plugs to the jacks on the wireless receiver module.  
5. Plug the power cord of the wireless receiver module into a wall outlet.  
6. Turn on the product. The product and wireless receiver module will now communicate with each other and you will  
hear sound from the Surround speakers.  
Front Speaker (R)  
Front Speaker (L)  
SPEAKERS OUT  
Subwoofer  
FRONT  
R
FRONT  
L
SUBWOOFER  
CENTER  
Center Speaker  
Surround  
Surround  
Speaker (L)  
Speaker (R)  
AUX IN  
FM ANT  
SPEAKERS OUT  
FRONT  
R
FRONT  
L
L
SUBWOOFER  
CENTER  
OPTICAL  
R
DIGITAL  
HD  
AUDIO IN  
Wireless Receiver Module  
* This product should be connected with the SWA-6000 only.  
|
English  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections  
| CAUTION |  
If you want to install the speakers on the wall, fasten screws or nails (not provided) firmly to the wall wherever you  
\
want to hang a speaker, and then, using the hole in the rear of each speaker, carefully hang each speaker on a screw  
or nail.  
Do not let children play with or near the speakers. They could get hurt if a speaker falls.  
\
When connecting the speaker wires to the speakers, make sure that the polarity (+/–) is correct.  
\
Keep the subwoofer speaker out of reach of children to prevent children from inserting their hands or alien  
\
substances into the duct (hole) of the subwoofer speaker.  
Do not hang the subwoofer on the wall using the duct (hole).  
\
The wireless receiving antenna is built into the wireless receiver module. Keep it away from water and moisture.  
\
For optimal listening performance, make sure that the area around the wireless receiver module location is clear of  
\
any obstructions.  
If you hear no sound from the wireless surround speakers, switch the mode to Dolby Pro Logic II.  
\
In 2-CH mode, you will hear no sound from the wireless surround speakers.  
\
| NOTES |  
If you place a speaker near your TV set, the screen color may be distorted because of the magnetic field.  
\
Place the wireless receiver module at the rear of the listening position. If the wireless receiver module is too close to  
\
the product, sound from the speakers may be disrupted because of interference.  
If you use a device such as a microwave oven, wireless LAN Card, Bluetooth equipment or any other device that uses  
\
the 2.4/5.8GHz frequencies near the product, sound from the speakers may be disrupted because of interference.  
The maximum transmission distance from the product to the wireless receiver module is about 33 feet (10m), but  
\
may vary depending on your operating environment. If a steel-concrete wall or metallic wall is between the product  
and the wireless receiver module, the system may not operate at all, because the radio wave cannot penetrate metal.  
If the product doesn't make a wireless connection, you need to run an ID Set between the product and wireless  
\
receiver module. With the product turned off, press "0""1""3""5" on the remote control. Turn on the wireless  
receiver module. Then, press and hold the “ID SET” button on the back of the wireless receiver module for 5  
seconds, and then turn the product on.  
Attaching the Toroidal Ferrite Core to the Power Cord of the Wireless  
Receiver Module (SWA-6000)  
If you attach a Toroidal ferrite core to the power cord of the wireless receiver  
module, it will help to prevent RF interference from radio signals.  
1.  
2.  
3.  
Pull the fixing tab of the Toroidal ferrite core to open it.  
Make a loop twice in the wireless receiver module power cord.  
Attach the Toroidal ferrite core to the wireless receiver module power  
cord as the figure shows and press it until it clicks.  
• Insert the ferrite core as close to the Wireless Receiver Module as  
possible.  
|
16  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting to TV/External Devices  
AUX IN  
FM ANT  
A
U
X
I
N
F
M
A
N
T
SPEAKERS OUT  
POWER  
LAN  
FRONT  
R
FRONT  
L
L
SUBWOOFER  
CENTER  
OPTICAL  
R
DIGITAL  
HDMI OUT  
HDMI IN  
A
U
D
I
O
I
N
L
OPTICAL  
R
DIGITAL  
HDMI OUT  
HDMI IN  
AIN  
Red  
R
White  
Method 1  
Method 2  
Method 3  
W
External Devices  
AUDIO OUT  
OPTICAL OUT  
HDMI OUT  
HDMI IN  
Connecting to a TV  
Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the HDMI IN jack on your  
TV. If you have set the product's remote control to operate your TV, press the TV SOURCE button on the remote control  
and select HDMI as the external source of the TV.  
Connecting to External Devices  
To select the correct mode for an external device, press the FUNCTION button. Each time you press the button, the  
mode changes in this order : BD/DVD D. IN AUX HDMI FM BT  
Method 1 AUX IN : Connecting an External Analog Component  
Using an RCA audio cable (not supplied), connect the AUDIO In jack on the product to the AUDIO Out jack on the  
external analog component. Select the AUX mode.  
• Be sure to match the colors on the cable plugs to the colors on the input and output jacks.  
Method 2 OPTICAL : Connecting an External Digital Audio Component  
Use to connect the digital audio output of digital signal components such as Cable Boxes and Satellite Receivers (Set-  
Top-Boxes). Using a digital optical cable (not supplied), connect the Optical Digital Audio In jack on the product to the  
Digital Optical Out jack of the external digital device.  
Select the D. IN mode.  
Method 3 HDMI IN : Connecting to an External Component with an HDMI Cable  
Connect an HDMI cable (not supplied) from the HDMI IN jack on the back of the product to the HDMI OUT jack on your  
digital device. Select the HDMI mode.  
| NOTES |  
To see video from your Cable Box/Satellite receiver, you must connect its video output directly to your TV.  
\
This system supports Digital sampling frequencies of 32 kHz or higher from external digital components.  
\
This system supports only DTS and Dolby Digital audio. MPEG audio, a bitstream format, is not supported  
\
|
English  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections  
Wireless Network  
Connecting to a Network Router  
You can connect your product to your network router  
using one of the methods illustrated below.  
Wired Network  
AUX IN  
FM ANT  
SPEAKERS OUT  
POWER  
LAN  
FRONT  
R
FRONT  
L
L
SUBWOOFER  
CENTER  
OPTICAL  
R
DIGITAL  
HDMI OUT  
HDMI IN  
AUDIO IN  
Wireless IP sharer  
Broadband modem  
(with integrated router)  
Broadband  
service  
Broadband  
service  
Or  
Router  
| NOTES |  
If your wireless IP router supports DHCP, this product  
can use a DHCP or static IP address to connect to the  
wireless network.  
\
Broadband  
service  
Set your wireless IP router to Infrastructure mode. Ad-  
hoc mode is not supported.  
\
\
The product supports only the following wireless  
security key protocols:  
Broadband  
modem  
-
WEP (OPEN/SHARED), WPA-PSK (TKIP/AES),  
WPA2-PSK (TKIP/AES)  
Select a channel on the wireless IP router that is not  
currently being used. If the channel set for the wireless  
IP router is currently being used by another device  
nearby, it will result in interference and communication  
failure.  
\
\
\
| NOTES |  
Your router or your Internet Service Provider's policies  
may prevent the product from accessing Samsung's  
software update server. If this occurs, contact your  
Internet Service Provider (ISP) for more information.  
DSL users, please use a router to make a network  
connection.  
\
In compliance with the newest Wi-Fi certification  
specifications, Samsung home theaters do not  
support WEP, TKIP, or TKIP-AES (WPS2 Mixed)  
security encryption in networks running in the 802.11n  
mode.  
\
\
To use the AllShare function, you must connect your  
PC to your network as shown in the illustrations on the  
above.  
Wireless LAN, by its nature, may cause interference,  
depending on the operating conditions (AP  
performance, distance, obstacles, interference by  
other radio devices, etc).  
The connection can be wired or wireless.  
|
18  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Settings  
Photos, Videos & Music : Play photos, videos  
or music content from Disc, USB, PC or mobile  
devices.  
The Initial Settings Procedure  
5
6
• The Home menu will not appear if you do not  
configure the initial settings.  
Settings : Set various functions to suit your  
personal preferences.  
• The OSD (On Screen Display) may change in this  
product after you upgrade the software version.  
RED (A) : Press the RED (A) button on your  
remote to create and/or log in to your personal  
Samsung account.  
• The access steps may differ depending on the  
menu you selected.  
7
The Initial Settings Procedure lets you set the OSD and  
menu languages, configure the connection to your home  
network, choose the aspect ratio output (screen size and  
format) that is correct for your TV, and apply an upgrade  
to your product's software, if one is available.  
For complete Initial Settings instructions, see the Quick  
Start Guide.  
BLUE (D) : Set up the wireless mirroring  
function between the home theater and a smart  
phone or tablet.  
Selecting an Option on the Home Screen  
1.  
To select an option on the Home screen, move the  
cursor using the  
buttons until it highlights  
▲▼◄►  
the option of your choice, and then press the  
E
| NOTES |  
button.  
If you want to display the Initial Settings screen again  
\
| NOTES |  
and make changes, select Settings > System >  
Setup in the Home screen or select the Reset option.  
(See page 22)  
If you leave the product in the stop mode for more  
\
than 5 minutes without using it, a screen saver will  
appear on your TV. If the product is left in the screen  
saver mode for more than 20 minutes, the power will  
automatically turn off.  
The Home Screen  
Accessing the Settings Screen  
4
5
Movies & TV  
Shows  
Apps  
Photos,  
Videos &  
Music  
1.  
Select Settings on the Home screen, and then  
press  
. The Settings screen appears.  
E
1
Display  
2
3
6
7
Display  
Add App  
Add App  
Add App  
Web Browser  
Settings  
3D Settings  
Audio  
TV Aspect Ratio  
16:9 Original  
On  
Samsung Account  
Screen Mirroring  
a
d
Network  
Smart Features  
System  
BD Wise  
Resolution  
Auto  
Movie Frame (24Fs)  
DVD 24Fs Conversion  
Smart Hub Screen Size  
Auto  
Off  
Support  
Movies & TV Shows : Download movies and  
Size 3  
TV Shows from the Internet.  
1
| NOTES |  
Depending on your country, this menu  
\
2.  
To access the menus, sub-menus, and options  
on the Settings screen, please refer to the remote  
control illustration on the next page.  
function may not be supported.  
Recommended Apps : A list of useful and  
2
3
4
popular apps we recommend you download.  
Web Browser : You can access the Internet  
using the Web Browser application.  
Apps : Download/Access various for pay or  
free-of-charge applications.  
|
English  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Settings  
Buttons on the Remote Control Used  
for the Settings Menu  
Lets you adjust the output of the  
product to the screen size of your  
TV. See page 50.  
TV Aspect  
Ratio  
FULL SCREEN  
HOME  
REPEAT  
BD Wise is Samsungs latest inter-  
connectivity feature.  
1
2
When you connect a Samsung  
product and a Samsung TV with BD  
Wise to each other via HDMI, and  
BD Wise is on in both the product  
and TV, the product outputs video at  
the video resolution and frame rate  
of the Blu-ray/DVD Disc.  
TOOLS  
INFO  
BD Wise  
3
4
RETURN  
EXIT  
TUNER  
MEMORY  
MO/ST  
Lets you set the output resolution of  
HOME Button : Press to move to the Home  
the HDMI video signal to  
1
screen.  
BD Wise, Auto, 1080p, 1080i,  
720p, 480p. The number indicates  
the number of lines of video per  
frame. The i and p indicate interlaced  
and progressive scan, respectively.  
The more lines, the higher quality.  
Resolution  
RETURN Button : Return to the previous menu.  
2
3
4
(Enter) / DIRECTION Button :  
E
• Press  
to move the cursor or select  
button to activate the currently  
▲▼◄►  
an item.  
• Press the  
Setting the Movie Frame (24Fs)  
feature to Auto lets the product  
adjust its HDMI output to 24 frames  
per second automatically for  
improved picture quality if attached  
to a 24Fs compatible TV.  
E
selected item or confirm a setting.  
EXIT Button : Press to exit the current menu.  
Movie Frame  
(24Fs)  
Detailed Function Information  
You can enjoy the Movie Frame  
(24Fs) feature only on a TV  
supporting this frame rate.  
Each Settings function, menu item, and individual option  
is explained in detail on-screen. To view an explanation,  
use the ▲▼◄►buttons to select the function, menu  
item, or option. The explanation will usually appear on the  
right of the screen.  
• Movie Frame is only available  
when the product is in the HDMI  
1080p output resolution modes.  
A short description of each Settings function starts on  
this page. Additional information on some of the functions  
is also in the Appendix of this manual.  
Converts DVD playback to 24  
frames per second and outputs it via  
HDMI. This option is only available  
when Movie Frame (24Fs) is set to  
on.  
DVD 24Fs  
Conversion  
Settings Menu Functions  
Smart Hub  
Lets you select the optimal size for  
Display  
Screen Size  
the Smart Hub Screen.  
Set up the 3D related functions.  
Lets you set the color space format  
for the HDMI output to match the  
capabilities of the connected device  
(TV, monitor, etc).  
3D Blu-ray Playback Mode:  
Select whether to play a Blu-ray  
Disc with 3D contents in 3D Mode.  
If you move to the Home or Smart  
Hub Home menu while in 3D  
mode, the product will switch to 2D  
automatically.  
HDMI Color  
Format  
Lets you set the product to output  
video from the HDMI OUT jack with  
Deep Color. Deep Color provides  
more accurate color reproduction  
with greater color depth.  
3D Settings  
HDMI Deep  
Color  
Screen Size: Enter the size of the  
TV attached to the product. The  
product will automatically adjust the  
3D output to the screen size of the  
TV.  
|
20  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Lets you select which speakers you  
want active, either the TV's speakers  
or the home theater's speakers.  
Progressive  
Mode  
Lets you improve picture quality  
when viewing DVDs.  
Speaker  
Selection  
Audio  
Lets you direct the sound from the  
TV to the Home Theater speakers.  
Requires an HDMI connection and  
an Audio Return Channel (ARC)  
compatible TV.  
Lets you configure the settings of  
the speakers you have connected  
to obtain the best possible surround  
sound.  
• If Audio Return Channel is set to  
on and you are using an HDMI  
cable to connect the product to  
the TV, digital optical input will not  
work.  
Normal Mode: Select if you  
have set up your speakers in the  
recommended speaker layout with  
the surround speakers next to or  
behind the listening positions.  
Audio Return  
Channel  
Simple  
Speaker  
Setup  
• If Audio Return Channel is set to  
auto and you are using an HDMI  
cable to connect the product to  
the TV, ARC or digital optical input  
is selected automatically.  
Simple Mode: Select if you have  
put your surround speakers in front  
of the listening position. Downmixes  
the front sound to the surround  
sound speakers.  
Lets you set the Digital Output to  
match the capabilities of the AV  
receiver you’ve connected to the  
product. For more details, please  
refer to the digital output selection  
table. (See page 52)  
| NOTES |  
DPLII, SFE, Virtual 7.1 will not  
\
Digital Output  
operate when the simple mode is  
on.  
Lets you adjust the following  
speaker settings and turn the test  
tone on and off so you can test the  
speakers.  
Lets you apply dynamic range  
control to Dolby Digital, Dolby  
Digital Plus, and Dolby TrueHD  
audio.  
Level: Lets you adjust the relative  
loudness of each speaker from 6db  
to -6db. For example, if you like  
deep bass, you can increase the  
loudness of the subwoofer by 6db.  
Auto: Automatically controls the  
dynamic range of Dolby TrueHD  
audio, based on information in the  
Dolby TrueHD soundtrack. Also  
turns dynamic range control off for  
Dolby Digital and Dolby Digital Plus.  
Dynamic  
Range  
Speaker  
Settings  
Distance: Lets you adjust the  
relative distance of each speaker  
from the listening position up to 30  
feet. The farther the distance, the  
louder the speaker will be.  
Control  
Off: Leaves the dynamic range  
uncompressed, letting you hear the  
original sound.  
Test Tone: Lets you run the Test  
Tone function so you can test your  
adjustments. Setting Test Tone to  
On turns the Test Tone on. Setting it  
to Off turns it off.  
On: Turns dynamic range control on  
for all three Dolby formats. Quieter  
sounds are made louder and the  
volume of loud sounds is reduced.  
Lets you select the multi-channel  
downmix method that is compatible  
with your stereo system. You  
can choose to have the product  
downmix to normal stereo or in  
surround compatible stereo.  
Lets you configure the Equalizer  
Equalizer  
settings manually.  
Downmixing  
Mode  
Lets you set the product so that  
the volume remains stable when a  
scene change occurs or when you  
change the channel.  
Smart Volume  
|
English  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Settings  
When the product is attached to a  
Smart Features  
digital TV, lets you adjust the audio  
delay so that the audio syncs with  
the video. You can set the delay  
between 0 and 300 milliseconds.  
Lets you configure App notification  
settings and view basic info about  
your Apps.  
Audio Sync  
Push Notification Settings :  
Receive notifications from selected  
services.  
Apps Settings  
Network  
Properties : See basic info about  
Network  
Status  
Lets you check the current network  
Apps.  
and Internet status.  
You can lock access to Video on  
Demand (VOD) content based on its  
rating.  
Configure the network connection  
so you can enjoy various features  
such as Internet services or AllShare  
Wi-Fi functionality, and perform  
software upgrades.  
Network  
Settings  
VOD Rating  
Lock  
| NOTES |  
The default security PIN is 0000.  
\
Lets you connect a Wi-Fi Direct  
device to the product using a peer-  
to-peer network, without the need  
for a wireless router.  
Depending on your country,  
\
this menu function may not be  
supported.  
Note that if the product is connected  
to a wireless network, it may be  
disconnected when you use Wi-Fi  
Direct.  
Terms &  
Lets you view the Smart Hub Terms  
and Conditions and Privacy Policy.  
Conditions,  
Privacy Policy  
Wi-Fi Direct  
Resets all Smart Hub settings to  
their default settings.  
| NOTES |  
Reset Smart  
Hub  
Text files, such as files with a .TXT  
\
| NOTES |  
or .DOC extension, will not display  
when you are using the Wi-Fi  
Direct function.  
The default security PIN is 0000.  
\
System  
Lets you control which devices on  
your network, such as smart phones  
and tablets, can share content with  
your TV.  
AllShare  
Settings  
Lets you re-run the Initial Settings  
procedure. See the Quick Start  
Guide for details.  
Setup  
Lets you assign an identifying name  
You can select the language you  
prefer for the On-Screen menu, disc  
menu, subtitles, etc.  
to the product. You use this name  
Device Name to identify the product when you are  
connecting external Wi-Fi devices  
Language  
• The language you select for the  
disc menu, disc audio, or subtitles  
will only appear if it is supported  
on the disc.  
(smart phones, tablets, etc.) to it.  
Set various BD-Live functions.  
BD-Live allows you to access extra  
features available on some Blu-ray  
Discs if you are connected to the  
Internet.  
BD-Live  
Settings  
BD-Live Internet Connection :  
Lets you fully allow, partly allow,  
or prohibit a BD-Live Internet  
connection.  
BD Data Management : Manage  
BD data downloaded from a BD-  
Live service or Blu-ray Disc.  
|
22  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
You can connect a wireless USB  
keyboard or mouse to the USB port  
on the front of the product.  
The default security PIN is 0000.  
Enter the default PIN to access  
the security function if you haven't  
created your own PIN.  
Keyboard Settings: Lets you  
configure a wireless USB keyboard  
connected to the product.  
BD Parental Rating : Prevents  
playback of Blu-ray Discs with a  
rating equal to or above a specific  
age rating you enter unless the PIN  
is entered.  
| NOTES |  
You can use the keyboard only  
\
when a QWERTY keyboard  
screen or window appears in the  
Web Browser.  
DVD Parental Rating : Prevents  
playback of DVDs with a rating  
above a specific numerical rating  
you have set unless the PIN is  
entered.  
Mouse Settings : Lets you  
configure a wireless USB mouse  
connected to the product. You can  
use the mouse in the product's  
menu in the same way you use a  
mouse on your PC.  
Change PIN : Changes the 4-digit  
PIN used to access security  
functions.  
Security  
If you forget your PIN  
To use a mouse with the  
1.  
2.  
Remove any disc or USB  
product's menu :  
storage device.  
1.  
Connect the USB mouse to  
Device  
Press and hold the  
button  
5
the product  
.
Manager  
on the front panel for 5  
seconds or more.  
2.  
Click the primary button you  
selected in Mouse Settings.  
The Simple Menu appears.  
All settings will revert to the  
factory default settings.  
3.  
Click the menu options you  
| NOTES |  
want.  
When the factory default settings  
\
are restored, all the user stored  
| NOTES |  
BD data is deleted.  
Some USB HID keyboards and  
\
mice may not be compatible with  
your product.  
You can specify the display  
brightness and time zone.  
Some HID keyboard keys may  
not work.  
\
\
\
\
Front Display : Lets you change  
the brightness of the front panel.  
Wired USB keyboards are not  
supported.  
General  
Time Zone : You can specify the  
time zone that is applicable to your  
area.  
Some applications may not be  
supported.  
Menu Transparency : Adjust the  
If a wireless HID Keyboard does not  
operate because of interference,  
move the keyboard closer to the  
product.  
transparency of the menu box.  
|
English  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Settings  
Anynet+ is a convenient function  
Networks and the Internet  
that offers linked operations with  
other Samsung products that have  
the Anynet+ feature and lets you  
control those products with one  
Samsung TV remote. To operate  
this function, you must connect this  
product to an Anynet+ Samsung TV  
using an HDMI cable.  
When you connect this product to a network, you can  
use network based applications and functions such as  
Smart Hub and BD-LIVE, and upgrade the product's  
software through the network connection. For more  
information about accessing and using Internet services,  
see the Network Services chapter of this manual on  
pages 41~49. Instructions for configuring the network  
cCoonnnefcitgiounrsitnargt bYeloowu.r Network Connection  
If you want to use an Anynet+  
(HDMI-CEC) function, please follow  
the instructions below.  
1)  
2)  
3)  
Anynet+  
If you didn't configure your network connection during the  
initial settings procedure or you need to reset the network  
connection, follow the directions below.  
Connect the product to an  
(HDMI-CEC)  
Anynet+ (HDMI-CEC)-compliant  
Samsung TV using HDMI Cable.  
Before you begin, contact your Internet Service Provider  
to find out if your IP address is static or dynamic. If it  
is dynamic, and you have a wired or wireless network,  
we recommend using the Automatic configuration  
procedures described below.  
Set the Anynet+ (HDMI-CEC)  
feature to On in both the TV and  
the product.  
Search for and then select the  
product in the TV's Anynet+  
(HDMI-CEC) list. For more exact  
instructions, see the Anynet+  
section of the TV's user's  
manual.  
If you are connecting to a wired network, connect the  
product to your router using a LAN cable before you start  
the configuration procedure.  
To begin configuring your network connection, follow  
these steps:  
1.  
In the Home screen, select Settings, and then  
Support  
press the  
button.  
E
2.  
3.  
Select Network, and then press the  
button.  
E
When activated, lets Samsung  
Call Center agents diagnose and  
fix problems with the product  
remotely. Requires an active Internet  
connection. Remote Management  
service might not be available in  
some countries.  
Select Network Settings, and then press the  
E
button.  
Remote  
4.  
Go to the instructions for Wired networks starting  
below or the instructions for Wireless networks  
starting on page 25.  
Management  
Wired Network  
For more information about the  
Software Update function, see  
"Upgrading Software" on page 27.  
Software  
Update  
K
Wired – Automatic  
After following Steps 1 to 3 above:  
Lets you set the Use mode. If you  
are using the home theater at home,  
always select Home. Store is for  
retail display settings only.  
1.  
In the Network Settings screen, change Network  
type to Wired. Then, select Connect and press  
the E button. The product detects the wired  
connection, verifies the network connection and  
then connects to the network.  
Use Mode  
Contact  
Provides contact information for  
Samsung  
assistance with your product.  
2.  
When it is done, highlight OK, and then press E  
button.  
Reverts all settings to their defaults  
except for the network and Smart  
Hub settings, and then starts the  
Setup function. Requires that you  
enter your security PIN. The default  
security PIN is 0000  
Reset  
|
24  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
K
Wired - Manual  
Wireless Network  
If you have a static IP address or the automatic procedure  
does not work, you'll need to set the Network Settings  
values manually.  
You can setup a wireless network connection in three  
ways:  
-
-
-
Wireless Automatic  
Wireless Manual  
WPS(PBC)  
After following Steps 1 to 3 above:  
1.  
In the Network Settings screen, change Network  
type to Wired. Then, select Connect and press the  
E button.  
Before you configure the wireless network connection,  
disconnect any wireless network device currently  
connected to the product or, if applicable, the product's  
current wired connection.  
The product searches for a network, and then  
displays the connection failed message.  
| NOTES |  
K
Wireless - Automatic  
If it is possible to connect the home theater to your  
\
After following Steps 1 to 3 in "Configuring Your Network  
Connection" on page 24:  
network wirelessly, select Change Network at this  
point, change the Network Type to Wireless, and  
then go to the instructions for wireless networks on  
page 25.  
1.  
In the Network Settings screen, change Network  
type to Wireless. Then, select Connect and press  
the E button.  
The product searches for and then displays a list of  
the available networks.  
Network Settings  
Wired network connection failed.  
MAC Address  
IP Address  
Subnet Mask  
Gateway  
XX:XX:XX:XX:XX:XX  
0. 0. 0.  
0. 0. 0.  
0. 0. 0.  
0. 0. 0.  
0
0
0
0
Network Settings  
Select your network type.  
DNS Server  
Network type  
Wireless  
Unable to connect to the network. Try the following: check if your IP address is  
set correctly in IP Settings. Contact your Internet Service Provider for more  
information.  
Wireless Network  
si-ap  
iptime  
Change Network  
IP Settings  
Retry  
Close  
iptime5G  
KIMING_VTOWER  
TIAS  
You can connect your TV to the  
internet. Please select which  
wireless network to use.  
Please select your preference.  
2.  
Use the ◄► buttons to select IP Settings, and  
then press the E button. The IP Settings screen  
appears.  
WPS(PBC)  
Refresh  
3.  
4.  
Select the IP Setting field, and then set it to Enter  
2.  
3.  
Select the desired network, and then press the  
button.  
E
manually.  
Select a value to enter (IP Address, for example),  
and then press E. Use the number keypad on  
your remote control to enter the numbers for the  
value. You can also enter numbers using the ▲▼  
buttons. Use the ◄► buttons on the remote control  
to move from entry field to entry field within a value.  
When done with one value, press the E button.  
On the Security screen, enter your network's  
security code or pass phrase.  
Enter numbers directly using the number buttons  
on your remote control. Enter letters by selecting a  
letter with ▲▼◄► buttons, and then pressing  
E
button.  
4.  
When finished, select Done, and then press the  
E
5.  
6.  
Press the ▲ or ▼ button to move to another value,  
and then enter the numbers for that value following  
the instructions in Step 4.  
button. The product verifies the network connection  
and then connects to the network.  
| NOTES |  
Repeat Steps 4 and 5 until you have filled in all  
You should be able to find the security code or pass  
\
values.  
phrase on one of the set up screens you used to set  
up your router or modem.  
| NOTES |  
You can get the Network values from your Internet  
\
provider.  
7.  
When finished entering all the values, select OK,  
and then press the E button. The home theater  
verifies the network connection and then connects  
to the network.  
|
English  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Settings  
K
Wireless - Manual  
9.  
Press the ▲ or ▼ button to move to another value,  
and then enter the numbers for that value following  
the instructions in Step 8.  
If you have a static IP address or the Automatic  
procedure does not work, you'll need to set the Network  
Settings values manually.  
10. Repeat Steps 8 and 9 until you have filled in all  
After following Steps 1 to 3 in "Configuring Your Network  
values.  
Connection" on page 24:  
| NOTES |  
1.  
In the Network Settings screen, change Network  
type to Wireless. Then, select Connect and press  
the E button.  
You can get the Network values from your Internet  
\
provider.  
The product searches for and then displays a list of  
11. When finished, select OK, and then press the  
E
the available networks.  
button. The Security Screen appears.  
2.  
Scroll through the list, select the desired network or  
12. On the Security screen, enter your network's  
Security Code or Pass Phrase. Enter numbers  
directly using the number buttons on your remote  
control. Enter letters by selecting a letter with the  
Add Network, and then press the  
button.  
E
3.  
4.  
If you selected a network in Step 2, go to Step 6.  
If you selected Add Network, go to Step 4.  
▲▼◄► buttons, and then pressing the  
button.  
E
Enter your wireless network or wireless router's  
name.  
13. When finished, select Done at the right of the  
screen, and then press the  
button. The product  
E
• Enter numbers directly using the number buttons  
on your remote control.  
verifies the network connection and then connects  
to the network.  
• Enter letters by selecting a letter with the ▲▼◄►  
14. After the home theater verifies the network, select  
buttons, and then pressing the  
button.  
E
OK, and then press the  
button.  
E
To display capital letters (or redisplay small letters  
if capital letters are displayed), select , and  
then press the button.  
| NOTES |  
E
You can also begin the Manual Network setting by  
\
To display symbols and punctuation, select  
going to Settings >Network > Network Status.  
123#&, and then press the  
button. To  
E
K
WPS(PBC)  
redisplay letters, select 123#&, and then press  
the E button.  
One of the easiest ways to set up the wireless network  
connection is using the WPS(PBC) function. If your  
wireless router has a WPS(PBC) button, follow these  
steps:  
When finished, select Done, and then press the  
E
button.  
5.  
6.  
On the Security type screen that appears, use the  
After following Steps 1 to 3 in "Configuring Your Network  
▲▼buttons to select the network's Security type,  
Connection" on page 24:  
and then press the  
button. On the next screen,  
E
enter your network's security code or pass phrase.  
1.  
In the Network Settings screen, change Network  
type to Wireless. Then, select Connect and press  
the E button.  
• Enter numbers directly using the number buttons  
on your remote control.  
The product searches for and then displays a list of  
the available networks.  
• Enter letters by selecting a letter with the ▲▼◄►  
buttons, and then pressing the E button.  
2.  
3.  
Scroll the list down, select WPS(PBC), and then  
When finished, select Done, and then press the  
E
press the  
button.  
E
button. The product searches for the network.  
Press the WPS(PBC) button on your router within  
two minutes. Your product automatically acquires all  
the network settings values it needs and connects  
to your network.  
The Network connection fail screen appears. Use  
◄► buttons to select IP Settings, and then press  
the E button.  
7.  
8.  
Select the IP Setting field, and then set it to Enter  
The product connects to the network after the  
network connection is verified.  
manually.  
Select a network value to enter (IP Address, for  
example), and then press E button. Use the  
number keypad on your remote control to enter the  
numbers for the value. You can also enter numbers  
using the ▲▼ buttons. Use the ◄► buttons on the  
remote control to move from entry field to entry field  
within a value. When done with one value, press the  
E button.  
4.  
When it is done, highlight OK, and then press E  
button.  
| NOTES |  
For WPS connection, set your wireless routers  
\
security encryption to AES. Setting to WEP security  
encryption does not support WPS connection.  
|
26  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wi-Fi Direct  
• The PBC and PIN procedures connect devices  
automatically.  
The Wi-Fi Direct function allows you to connect Wi-Fi  
Direct devices to the product and each other using a  
peer-to-peer network, without a wireless router.  
Through the Product Using PBC  
1.  
2.  
Select the Wi-Fi Direct device you want to connect  
| NOTES |  
to this product, and then press the  
button.  
E
Some Wi-Fi Direct devices may not support the  
\
The Connecting pop-up appears, followed by the  
Connected pop-up. When it closes, you should  
see the device listed on the Wi-Fi Direct screen as  
connected.  
AllShare function if connected via Wi-Fi Direct. If this is  
the case, change the network connection method you  
used to connect the device to the home theater.  
Wi-Fi Direct transmissions can interfere with the  
\
Bluetooth signal. Before you use the Bluetooth  
function, we strongly recommend that you turn off  
the Wi-Fi Direct function on any device in which it is  
currently on.  
Through the Product Using a PIN  
1.  
Select the Wi-Fi Direct device you want to connect  
to this product, and then press the  
The PIN pop-up appears.  
button.  
E
1.  
2.  
Turn on the Wi-Fi direct device and activate its Wi-Fi  
2.  
3.  
Direct function.  
Note the PIN code in the pop-up, and then enter it  
into the appropriate field in the Wi-Fi Direct device  
you want to connect.  
In the Home screen, select Settings, and then  
press the  
button.  
E
3.  
4.  
Select Network, and then press the  
button.  
E
4.  
The Connecting pop-up appears, followed by the  
Connected pop-up. When it closes, you should  
see the device listed on the Wi-Fi Direct screen as  
connected.  
Select Wi-Fi Direct, and then press the  
button.  
E
The Wi-Fi Direct devices that you can connect  
appear.  
| NOTES |  
Wi-Fi Direct  
Device Name : [HTS]-F5500W  
The current wired or wireless network connection  
\
Select your Wi-Fi Direct device to connect to.  
will be disconnected when you use the Wi-Fi Direct  
function.  
AndroidXXXXXXX  
Disconnected  
Text files, such as files with a .TXT or .DOC extension,  
\
will not display when you are using the Wi-Fi Direct  
function.  
Refresh  
Close  
Upgrading Software  
The Software Update menu allows you to upgrade the  
products software for performance improvements or  
additional services.  
5.  
You have three ways to complete the Wi-Fi  
connection:  
• Through the Wi-Fi device.  
• Through the product using PBC.  
• Through the product using a PIN.  
• Never turn the product off or back on manually  
during the update process.  
Each is covered below.  
1.  
In the Home menu, select Settings, and then press  
the  
button.  
E
Through the Wi-Fi Device  
2.  
3.  
Select Support, and then press the  
button.  
E
1.  
2.  
On the Wi-Fi device, follow the device's procedure  
for connecting to another Wi-Fi Direct device. See  
the device's user manual for instructions.  
Select Software Update, and then press the  
E
button.  
4.  
To download update software and update now,  
When you have completed the procedure, you  
should see a pop-up on your TV screen saying that  
a device that supports Wi-Fi Direct has requested to  
select Update now, and then press the  
button.  
E
See "Update now" on the next page for details.  
connect. Select OK, and then press the  
The Connecting pop-up appears, followed by the  
Connected pop-up. When it closes, you should  
see the device listed on the Wi-Fi Direct screen as  
onnected.  
button  
E
5.  
To let the product download update software  
to accept.  
automatically when available, select Auto Update,  
3.  
and then press the  
button. See "Auto Update"  
E
on the next page for details.  
|
English  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Settings  
| NOTES |  
2.  
Select On or Off.  
If you select On, the product will automatically  
download new upgrade software when it is in Auto  
Update mode with the power off. If it downloads  
new upgrade software, the product will ask you if  
you want to install it when you turn the product on.  
The upgrade is complete when the product turns off,  
\
and then turns on again by itself.  
Samsung Electronics takes no legal responsibility for  
\
product malfunction caused by an unstable Internet  
connection or consumer negligence during a software  
upgrade.  
| NOTES |  
If you want to cancel the upgrade while the upgrade  
\
To use the Auto Update function, your product must  
\
software is downloading, press the  
button.  
E
be connected to the Internet.  
When a system upgrade is in progress, "UPDATE" is  
displayed on the front panel.  
\
Update by USB  
Update now  
1.  
2.  
3.  
You can use Update now to update the software through  
your network connection or by using a USB flash drive.  
The network instructions are below. The USB flash drive  
instructions are on this page.  
Click SUPPORT on the top right of the page.  
Enter the product's model number into the search  
field. As you enter the model number, a drop down  
will display products that match the model number.  
1.  
2.  
3.  
Select Update now, and then press the  
button.  
E
4.  
5.  
Left click your product's model number in the drop  
The Update now pop-up appears.  
down list.  
The product searches on line for the latest software  
On the page that appears, scroll down to and then  
version.  
click Firmware Manuals & Downloads.  
If it does not find an update, the "There are no new  
updates for you at the moment." pop-up appears.  
6.  
7.  
Click Firmware in the center of the page.  
Click the ZIP button in the File column on the right  
Press the  
button to exit.  
E
side of the page.  
4.  
5.  
6.  
If it finds a new version, the Update Request pop-  
up appears.  
8.  
Click Send in the first pop-up that appears.  
Click OK in the second pop-up to download and  
save the firmware file to your PC.  
Select OK. The product upgrades the software,  
turns off, and then turns on automatically.  
9.  
Unzip the zip archive to your computer. You should  
have a single folder with the same name as the zip  
file.  
If you do not select OK or Cancel in one minute,  
the product stores the new upgrade software. You  
can upgrade the software later using Auto Update.  
7.  
If you select Cancel, the product cancels the  
10. Copy the folder to a USB flash drive.  
upgrade.  
11. Make sure no disc is inserted in the product, and  
then insert the USB flash drive into the USB port of  
the product.  
| NOTES |  
When the system upgrade is done, check the  
\
\
12. In the products menu, go to Settings > Support >  
software details in the Product Information section of  
the Contact Samsung screen.  
Software Update.  
13. Select Update now.  
Do not turn off the product during the Software  
Update. It may cause the product to malfunction.  
14. The product searches for the software on the  
USB drive. When it finds the software,the Update  
Request pop-up appears.  
Auto Update  
You can set the Auto Update function so that the product  
downloads new upgrade software when it is in Auto  
Update mode.  
15. Select OK. The product upgrades the software,  
turns off, and then turns on automatically.  
| NOTES |  
In Auto Update mode, the product is off, but its Internet  
connection is active. This allows the product to download  
upgrade software automatically, when you are not using it.  
There should be no disc in the product when you  
\
upgrade the software using the USB jack.  
When the system upgrade is done, check the  
\
1.  
Press the ▲▼ buttons to select Auto Update  
software details in the Product Information section of  
the Contact Samsung screen.  
Mode, and then press the  
button.  
E
Do not turn off the product during the software  
\
upgrade. It may cause the product to malfunction.  
Software upgrades using the USB jack must be  
\
performed with a USB flash drive only.  
|
28  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Media Play  
Your home theater can play content located on Blu-ray/  
DVD/CD discs, USB devices, PCs, smart phones, tablets,  
and on the Web.  
Movies & TV  
Shows  
Apps  
Phot
os,  
Vide
o
s &  
Mus
i
c  
To play content located on your PC or a mobile device,  
you must connect the PC or mobile device and the  
product to your network. To play content on your PC, you  
must also download and install AllShare network software  
or already have DNLA network software on your PC.  
New device connected.  
USB Flash Disk  
Videos  
Photos  
Music  
All  
Add App  
Add App  
Add App  
Web Browser  
Settings  
| NOTES |  
PCs running Windows 7 and Windows 8 have DLNA  
\
software (Play To) built in.  
| NOTES |  
If the pop-up does not appear, go to Method 2.  
\
3.  
The All Content Screen  
Use the ▲▼ buttons to select Videos, Photos,  
For all media, the All Content screen or one of its sub  
screens is your primary means of accessing and playing  
contents saved on a variety of devices, either connected  
Music or All, and then press the  
button.  
E
Depending on how the contents are arranged, you  
will see either folders, individual files, or both.  
dUirsecintlygorthuseingAyloluCr noentwtoernk.t Screen  
| NOTES |  
Even though the product will display folders for all  
\
content types, it will only display files of the Content  
Type you selected in Step 3. For example, if you  
selected music, you will only be able to see music  
files. You can change this selection by returning to  
the AllShare Play screen, and then going to Step 4 in  
Method 2 below.  
To access the All Content screen, select Photos, Videos  
& Music on the Home screen, and then press the  
E
button.  
Playing Commercial Discs  
4.  
5.  
6.  
7.  
If necessary, use the ▲▼◄► buttons to select a  
1.  
2.  
Press the button to open the disc tray.  
folder, and then press the  
button.  
E
Place a disc gently into the disc tray with the discs  
label facing up.  
Select a file to view or play, and then press the  
E
button.  
Press the RETURN button to exit a folder or the  
Exit button to return to the Home screen.  
Go to pages 31~38 for instructions that explain how  
to control playback of videos, music, and pictures  
on a USB device.  
Method 2  
3.  
4.  
Press the button to close the disc tray.  
1.  
2.  
Turn the product on.  
Playback starts automatically.  
Connect the USB device to the USB port on the  
If playback does not start automatically, press the  
front panel of the product.  
button on the remote or see “The All Content  
6
3.  
4.  
Select Photos, Videos & Music on the Home  
Screen” above.  
screen, and then press the  
button.  
E
Select Photos, Videos, Music or All Content, and  
Playing Files on a USB Device  
then press the  
button.  
E
Depending on how the contents are arranged, you  
There are two methods you can use to play or view  
multimedia files located on a USB device through your  
product.  
will see either folders, individual files, or both.  
| NOTES |  
Even though the product will display folders for all  
Method 1  
\
content types, it will only display files of the Content  
Type you selected in Step 4. For example, if you  
selected music, you will only be able to see music  
files. You can change this selection by returning to the  
AllShare Play screen and repeating Step 4.  
1.  
2.  
Turn the product on.  
Connect the USB device to the USB port on  
the front panel of the product. The New Device  
Connected pop-up appears.  
|
English  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Media Play  
5.  
6.  
7.  
8.  
Use the ◄► buttons to select the desired device  
Using the AllShare Network  
Function  
and then press the  
button.  
E
If necessary, use the ▲▼◄► buttons to select a  
folder, and then press the  
button.  
E
AllShare lets you play Videos, Photos, or Music located  
on your PC or your DLNA compatible device through the  
product using a wireless network connection.  
Press the RETURN button to exit a folder or the  
Exit button to return to the Home screen.  
Go to pages 31~38 for instructions that explain how  
to control playback of videos, music, and pictures  
on a USB device.  
To Download the AllShare Software  
To use AllShare with your PC, you must install AllShare  
software on your PC. You can download the PC software  
and get detailed instructions for using AllShare from the  
Samsung.com website.  
| NOTES |  
If you insert a disc when playing a USB device  
\
or phone, the device mode changes to "Disc"  
automatically.  
1.  
2.  
3.  
Click Support at the top of the page.  
If your cellular phone is DLNA compatible, you can  
play contents without connecting a USB cable. See  
"Using the AllShare Network Function" on page 30.  
\
On the Support page, enter the model number of  
your product into the Model Number field, and then  
press the  
button.  
E
Playing a Disc with User Recorded  
Content  
4.  
On the page that appears, click See All Downloads  
on the left side of the screen under Downloads. The  
Download Tab appears.  
You can play multimedia files you have recorded on Blu-  
ray, DVD, or CD discs.  
5.  
6.  
On the Download Tab, click Software.  
In the list of software, click the EXE button on the  
1.  
Place a user recorded disc into the disc tray with  
the discs label facing up, and then close the tray.  
The Device Connected pop-up appears.  
right side of the AllShare line.  
7.  
8.  
9.  
In the pop-up that appears, click the Send button.  
In the next pop-up, click Save File.  
2.  
Use the ▲▼ buttons to select the type of content  
Find the AllShare install file on your disk, and then  
double click the file.  
you want to view or play - Videos, Photos, or Music  
- and then press the  
button.  
E
10. In the pop-up that appears, click Run, and then  
| NOTES |  
follow the directions that appear on your screen.  
Even though the product will display folders for all  
content types, it will only display files of the Content  
Type you selected in Step 2. For example, if you  
selected music, you will only be able to see music  
files. You can change this selection by returning to the  
Home screen and repeating Step 2.  
\
Download the AllShare Installation/Instruction manual from  
the same Software Tab by clicking the corresponding  
PDF file symbol in the File column on the right. The file, in  
PDF format, will download and open. You can view and/  
or save the file.  
3.  
A screen appears listing the contents of the disc.  
Depending on how the contents are arranged, you  
will see either folders, individual files, or both.  
Playing Content Located on your PC or  
DLNA Device through the Product  
4.  
5.  
6.  
If necessary, use the ▲▼◄►buttons to select a  
folder, and then press the  
button.  
E
PC  
Product  
Use the ▲▼◄► buttons to select a file to view or  
play, and then press the  
button.  
E
Press the RETURN button one or more times to  
exit a current screen, exit a folder, or to return to the  
Home screen.  
Play back  
PC's files  
Press the Exit button to return directly to the Home  
AllShare Connection  
Screen.  
7.  
Go to pages 31~38 for instructions that explain how  
to control playback of videos, music, and pictures  
on a disc.  
1.  
Connect the product, your PC, and/or your DLNA  
compatible device to the same wireless network.  
|
30  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2.  
3.  
4.  
Follow the directions in the AllShare software  
Installation/Instruction manual to set up devices and  
files for playing or viewing.  
Controlling Video Playback  
You can control the playback of video content located on  
a Blu-ray/DVD disc, USB device, mobile device or PC.  
Depending on the disc or contents, some of the functions  
Select Photos, Videos & Music on the product's  
Home screen, and then press the  
AllShare Play screen appears.  
button. The  
E
dBeusctrtiboendsinothnis tmhaenuRalemmayontoet bCe aovnaitlarbolel.used  
Select the type of content you want to play -  
Photos, Videos, Music, or All Content - and then  
press the  
button.  
E
for Video Playback  
5.  
6.  
On the next screen, select AllShare, and then press  
DISC MENU  
TITLE MENU  
the  
button.  
E
POPUP  
0
In the list of AllShare connected devices that  
appears, select your PC or other AllShare  
1
2
compatible device, and then press the  
button.  
E
A screen listing the available files appears.  
MUTE  
HOME  
7.  
Select the file you want to play or view, and then  
FULL SCREEN  
REPEAT  
press the  
button.  
E
3
Controlling the Playback of Content  
Located on Your PC with your Smart  
Phone  
Using the disc menu, title menu, popup menu and  
1
title list  
During playback, press this button to  
DISC MENU  
PC  
display the Disc menu.  
Product  
During playback, press this button to  
display the Title menu.  
TITLE  
Play back  
PC's files  
MENU  
• If your disc has a playlist, press the  
View button to go to the playlist.  
AllShare  
Control PC's  
Connection  
POPUP  
MENU  
During playback, press this button to  
files to Product  
display the Popup menu.  
Smart Phone  
Playback related buttons  
2
(Only available with Samsung phones supporting AllShare  
The product does not play sound in Search, Slow, or  
functionality.)  
Step mode.  
To return to normal speed playback, press the  
6
1.  
2.  
Connect the product, your PC, and your DLNA  
compatible cellular phone to the same wireless  
network.  
button.  
Starts playback.  
6
Follow the directions in the AllShare software  
Installation/Instruction manual to set up devices and  
files for playing or viewing.  
Stops playback.  
5
Pauses playback.  
7
3.  
4.  
On your computer, using the AllShare software,  
During playback, press the  
or  
3
4
confirm your phone is connected.  
button.  
Fast Motion  
Play  
On the phone, select the file you want to view or  
play, and then select the home theater system as  
the playback device.  
Each time you press the  
or  
3
4
button, the playback speed will  
change.  
5.  
On the phone, start playback.  
In pause mode, press the  
Each time you press the  
button.  
4
4
Slow Motion  
Play  
button,  
the playback speed will change.  
In pause mode, press the  
button.  
7
7
Step Motion  
Each time you press the  
button, a  
Play  
new frame appears.  
|
English  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Media Play  
During playback, press the  
or  
Movie Note provides information  
such as director, cast, synopsis,  
etc.  
1
2
button.  
Skip Motion  
Each time you press the  
or  
1
2
Play  
Movie Note  
button, the disc moves to the previous  
-
Movie Note is available if the disc  
includes Movie Note information  
and is connected to a network.  
or next chapter or file.  
Repeat Playback  
3
You can use the Search Scene  
function during playback to view  
or start a movie from the scene of  
your choice.  
1.  
During playback, press the REPEAT button on the  
remote control.  
2.  
Press the ▲▼ buttons to select Off, Title, Chapter,  
All or Repeat A-B then press the  
button.  
E
| NOTES |  
If the index information in the file  
K
Repeat A-B  
\
is damaged or the file does not  
support indexing, you will not be  
able to use the Search Scene  
function.  
1.  
Press the  
button at the point where you want  
E
Search Scene  
repeat play to start (A).  
2.  
3.  
4.  
Press the  
button at the point where you want  
E
repeat play to stop (B).  
If you are using the DLNA  
\
function after connecting to a  
computer through your network,  
Search Scene may not be  
supported.  
To return to normal play, press the REPEAT button  
again.  
Press the  
button.  
E
| NOTES |  
If there is more than one movie on  
the disc or device, select to start a  
different title.  
Depending on the disc, the screen may not display all  
repeat options.  
\
\
The screen may not display Chapter or Title  
immediately. Continue to press the ▲▼ buttons until  
your choice is inside the applicable field.  
To return to normal play, press the REPEAT button  
again, press the ▲▼ buttons to select Off, and then  
1.  
2.  
Select Search Titles, and  
Search Titles  
then press the  
button.  
E
Use the ▲▼ buttons to select  
\
\
\
a title, and then press the  
E
button.  
press the  
button.  
E
The screen may not display Repeat A-B immediately.  
Continue to press the ▲▼ buttons until Repeat A-B is  
inside the applicable field.  
Select to play the chapter of your  
choice.  
1.  
2.  
Select Search Chapters, and  
You must set point (B) at least 5 seconds of playing  
time after point (A).  
Search  
then press the  
button.  
E
Chapters  
Use the ▲▼ buttons to select  
a chapter, and then press the  
Using the TOOLS Menu  
button.  
E
During playback, press the TOOLS button.  
Select to play the movie from a  
selected time point.  
Select to return to the beginning of  
Play from the  
Beginning  
the movie, and then press the  
button.  
E
1.  
2.  
Select Search Time Bar, and  
then press the  
button.  
E
Using the number buttons,  
enter the time point you want  
to go to, and then press the  
Use 3D menu to select Side by  
Side or Top Bottom option if the  
3D content currently playing does  
not properly appear in 3D mode.  
Search Time  
Bar  
button.  
E
3D  
| NOTES |  
| NOTES |  
You can also use the ◄►  
\
Use 3D menu for 3D contents  
\
buttons to advance or rewind  
the movie. The movie advances  
or rewinds one minute each tme  
you press the ◄► buttons.  
only. If applied to 2D contents, it  
may not be displayed properly.  
|
32  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Select to repeat a title, chapter, or  
specific section.  
Select to set the Equalizer.  
Equalizer  
Settings  
| NOTES |  
-
-
-
-
Off : Select to return to normal  
It only appears when equalizer  
\
playback.  
mode is on.  
Title : Choose to repeat a  
selected title.  
Select to set the desired subtitle  
Chapter : Choose to repeat a  
language.  
specific chapter.  
-
You can also operate this  
function by pressing the  
SUBTITLE button on the remote  
control.  
Subtitle  
Repeat A-B : Choose to repeat  
a specific section.  
1.  
2.  
Press the ▲▼ buttons to  
select repeat A-B, and then  
Subtitle  
Settings  
Select to set the desired subtitle  
Repeat Mode  
press the  
Press the  
button.  
E
E
options.  
button at the  
To view a scene from another  
angle. The Angle option displays  
the number of angles available to  
view (1/1, 1/2, 1/3, etc.).  
point where you want repeat  
play to start (A). Let the movie  
play.  
Angle  
3.  
Press the  
button at the  
E
point where you want repeat  
BONUSVIEW  
Video  
play to stop (B).  
Select to set the desired bonusview  
option.  
| NOTES |  
BONUSVIEW  
Audio  
You must set point (B) at least  
\
5 seconds of playing time after  
Select to set the size of the video  
image. Choose Original, Mode1  
(larger), or Mode2 (largest).  
point (A).  
Full Screen  
Select to set the picture mode.  
-
-
-
-
Dynamic : Increases sharpness  
Information  
| NOTES |  
Select to view video file information.  
and brightness.  
Standard : Choose this setting  
for most viewing applications.  
Depending on the disc or storage device, the Tools  
menu may differ.  
\
\
Movie : The best setting for  
watching movies.  
Video files with high bitrates of 20Mbps or more strain  
the products capabilities and may stop playing during  
playback.  
Picture Mode  
User : Lets you adjust the  
sharpness and noise reduction  
function respectively.  
Using the View & Options Menus  
| NOTES |  
On the screen that lists the video files, use the ▲▼◄►  
When you use the BD wise  
\
buttons to select View or Options in the upper right, and  
function, this menu will not  
then press the  
button.  
E
appear.  
Select to set the desired audio  
language.  
Videos  
Audio  
Displays all the folders with  
In some cases when the product is  
connected to a digital TV, the audio  
signal may not synchronize with the  
video signal. If this occurs, adjust  
the audio delay time to match the  
video signal.  
videos by date. If you select  
Date  
a folder, and then press  
E
button, displays all the videos  
Audio Sync  
in the folder by date.  
View  
Displays all the video files on  
the media or storage device  
by title.  
Title  
Equalizer  
Mode  
Select to use the Equalizer.  
Displays all the folders on the  
Folder  
media or storage device.  
|
English  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Media Play  
Play Selected lets you  
button : Stops a track.  
3
4
5
create a playlist by selecting  
specific files to play. It works  
essentially the same way for  
all media. See Creating a  
Playlist from a CD on page  
35.  
Fast Play (Audio CD (CD-DA) only)  
Play  
During playback, press the  
Each time you press the  
or  
button.  
3
or  
4
Selected  
button, the  
3
4
playback speed will change.  
button : Pauses a track.  
5
6
7
Options  
Select Send to upload  
button : Plays the currently selected track.  
6
selected files to apps (Picasa,  
Facebook etc) or devices.  
To use Send, you need to  
establish an account with the  
on-line site, and then log in  
using the Log In function.  
Send  
Music Screen Controls  
Options  
TRACK 001  
TRACK 002  
TRACK 003  
TRACK 004  
TRACK 005  
00:43  
03:56  
04:41  
04:02  
03:43  
03:40  
04:06  
03:52  
03:04  
04:02  
| NOTES |  
Depending on the disc or storage device, the Options  
View menus may differ. All options may not be  
displayed.  
\
TRACK 001  
TRACK 006  
TRACK 007  
00:09  
00:43  
The View and Options menus are usually available  
when you are viewing video files on a USB flash  
drive, a PC, a disc you recorded yourself, or a mobile  
device. They are usually not available if you are viewing  
a commercial Blu-ray, DVD, or CD disc.  
\
TRACK 008  
TRACK 009  
TRACK 010  
off  
off  
Pause a track.  
Play a track.  
Controlling Music Playback  
You can control the playback of music content located on  
a DVD, CD, USB, mobile device or PC. Depending on the  
disc or contents, some of the functions described in this  
manual may not be available.  
Move to the previous track.  
Move to the next track.  
Rewind the track.  
Buttons on the Remote Control used  
for Music Playback  
Advance the track.  
1
4
2
5
8
0
3
6
Repeat one track or all tracks.  
Play tracks in random order.  
,
1
1
7
9
DISC MENU  
TITLE MENU  
Display the Equalizer.  
POPUP  
4
Adjust the equalizer manually.  
2
3
(Only when equalizer mode is on)  
5
6
To access the controls, play a track, and then use the  
▲▼◄► buttons to move to the control of your choice.  
NUMBER buttons : If numbered tracks are  
displayed, press the number of a track. The  
selected track is played.  
1
buttons : Move to the previous/next  
1 2  
track.  
2
|
34  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
| NOTES |  
Select to see content  
information.  
Information  
Encoding  
The Music Screen controls are only accessible when a  
\
\
track is playing.  
Select to manage the text  
All controls do not appear at the same time.  
encoding options.  
Using the View & Options Menus  
| NOTES |  
On the screen that lists the music files, use the ▲▼◄►  
Depending on the disc or storage device, the Options  
menu may differ. All options may not be displayed.  
\
buttons to select View or Options in the upper right, and  
then press the  
button.  
E
Repeating Tracks on an Audio CD  
Music  
You can set the product to repeat tracks on an audio CD  
(CD-DA/MP3).  
Displays all the music  
Track  
tracks on the media or  
1.  
During playback, use the ▲▼◄► buttons to select  
storage device.  
in the lower left corner of the screen, and then  
Displays all the music on  
the media or storage by  
album.  
press the  
button.  
E
Album  
Artist  
2.  
Use the ▲▼ to select the Repeat mode you want  
- Off, One Song, or All - and then press the  
E
button.  
Displays all the music files  
on the media or storage  
device by artist  
View  
Options  
TRACK 001  
TRACK 002  
TRACK 003  
TRACK 004  
TRACK 005  
TRACK 006  
TRACK 007  
TRACK 008  
TRACK 009  
TRACK 010  
00:43  
03:56  
04:41  
04:02  
03:43  
03:40  
04:06  
03:52  
03:04  
04:02  
Displays all music on  
the media or storage by  
genre.  
Genre  
Folder  
TRACK 001  
Displays all the folders  
on the media or storage  
device.  
00:09  
00:43  
off  
off  
Play Selected lets you  
create a playlist by  
selecting specific files to  
play. It works essentially  
the same way for all  
media. See Creating a  
Playlist on an Audio CD  
on this page.  
Play  
Shuffling Tracks on an Audio CD  
Selected  
You can set the product to play tracks on an audio CD  
(CD-DA/MP3) at random.  
1.  
During playback, use the ▲▼◄► buttons to select  
in the lower left corner of the screen, and then  
Select Send to upload  
selected files to apps  
(Picasa, Facebook etc)  
or devices. To use Send,  
you need to establish an  
account with the on-line  
site, and then log in using  
the Log In function.  
press the  
button.  
E
2.  
Use the ▲▼ to set the Shuffle mode Off or On, and  
then press the  
button.  
E
Options  
Send  
Creating a Playlist from a CD  
1.  
2.  
With the Playback screen displayed, select the  
Options button and then press the  
button. The  
E
Options menu appears.  
The Ripping function  
converts CD audio to the  
mp3 format and saves  
the converted files on a  
USB device or the mobile  
device connected to the  
product. See Ripping on  
page 36.  
Use the  
buttons to select Play Selected , and  
ꢁꢂ  
then press the  
button. The Play Selected screen  
E
appears.  
Ripping  
|
English  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Media Play  
3.  
Use the  
buttons to select a track, and then  
button. A check appears to the left of  
8.  
Use the ▲▼ buttons to select the device to store  
the ripped files on, and then press the button.  
ꢁꢂ  
press the  
E
E
the track.  
| NOTES |  
4.  
5.  
Repeat Step 3 to select and check additional tracks.  
To remove a track from the list, move to the track,  
Do not disconnect the device while ripping is in  
progress.  
\
and then press the  
button again.The check on  
E
9.  
If you want to cancel ripping, press the  
button  
E
the track is removed.  
and then select Yes. Select No to continue ripping.  
6.  
When done, press the  
buttons to select Play,  
ꢁꢂ  
10. When ripping is complete, the “Successfully  
and then press the  
button. The Music Playback  
E
Ripped.” message appears. Press the  
button.  
E
screen reappears listing only the tracks you  
11. Press the RETURN button to go back to the  
checked. The selected tracks play automatically.  
Playback screen.  
| NOTES |  
| NOTES |  
You can create a playlist with up to 99 tracks from  
\
\
\
This function is not available with DTS Audio CDs.  
\
Audio CDs (CD-DA).  
This function may not be supported by some discs.  
\
If you have created a playlist, Play Selected is  
replaced by Edit Playlist on the Options menu.  
On the Play Selected screen, you can also choose  
Select All, Deselect All, and Cancel.  
Ripping encodes music to the .mp3 format at  
\
192kbps.  
On the Ripping screen, you can also choose Select  
\
All or Deselect All.  
Use Select All to select all tracks. This cancels  
~
- Use Select All to select all tracks and press the  
E
your individual track selections. When you press  
button. This cancels your individual track selections.  
the RETURN button on your remote or select Play  
and then press the  
button, all tracks will appear  
- Use Deselect All to deselect all selected tracks at  
E
on the Music Playback screen, and the product will  
once.  
begin to play all tracks from Track 001.  
Use Deselect All to deselect all selected tracks at  
once. Then, select individual tracks or use Select  
All to select all the tracks, and then press the  
RETURN button on your remote or select Play and  
Using Bluetooth  
~
You can use a Bluetooth device to enjoy music with high  
quality stereo sound, all without wires!  
then press the  
button. If you do not use Select  
E
What is Bluetooth?  
All or select individual tracks, the Playlist will not  
change.  
Bluetooth is a technology that enables Bluetooth-  
compliant devices to interconnect with each other easily  
using a short wireless connection.  
Cancel cancels any changes you made on the Play  
Select screen. When you return to the Playback  
screen, the Playlist will be unchanged.  
~
• A Bluetooth device may hum or malfunction:  
Ripping  
-
-
-
When a part of your body is in contact with the  
receiving/transmitting system of the Bluetooth device  
or the Home Theater.  
1.  
2.  
Insert a USB device into the USB jack on the front  
of the product.  
When it is subject to electrical variation from  
obstructions caused by a wall, corner or office  
partitioning.  
With the Playback screen displayed, select the  
Options button and then press the  
button.  
E
The Options menu appears.  
When it is exposed to electrical interference from  
same frequency-band devices including medical  
equipment, microwave ovens and wireless LANs.  
3.  
4.  
Use the ▲▼ buttons to select Ripping, and then  
press the  
button. The Ripping screen appears.  
E
• Pair the Home Theater with the Bluetooth device while  
the two are close together.  
Use the ▲▼ buttons to select a track, and then  
press the  
button. A check appears to the left of  
E
the track.  
• The further the distance is between the Home Theater  
and the Bluetooth device, the worse the quality is.  
If the distance exceeds the Bluetooth operational  
range, the connection is lost.  
5.  
6.  
Repeat Step 4 to select and check additional tracks.  
To remove a track from the list, move to the track,  
and then press the  
button again. The check on  
E
• In poor reception-sensitivity areas, the Bluetooth  
connection may not work properly.  
the track is removed.  
7.  
When done, select the Rip button using the ▲▼  
buttons, and then press the  
The Rip pop-up appears.  
button.  
E
|
36  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connect only to a Bluetooth device that supports the  
A2DP Profile.  
• The Home Theater has an effective reception range of  
up to 32.8 feet in all directions if there are no obstacles.  
The connection will be automatically cut off if the  
device is out of this range. Even within this range, the  
sound quality may be degraded by obstacles such as  
walls or doors.  
\
Only one Bluetooth device can be paired at a time.  
The search or connection functions may not work  
properly in the following cases:  
\
\
-
If there a strong electric field near or around the  
home theater.  
• This wireless device may cause electrical interference.  
during its operation.  
-
-
-
If several Bluetooth devices are simultaneously  
paired with product.  
To connect the Home Theater to a  
If the Bluetooth device is turned off, not in place, or  
malfunctions.  
Bluetooth device  
Note that such devices as microwave ovens, wireless  
LAN adapters, fluorescent lights, and gas stoves use  
the same frequency range as the Bluetooth device,  
and can cause electric interference.  
Connect  
To disconnect the Bluetooth device from  
the Home Theater  
You can disconnect the Bluetooth device from the Home  
Theater. For instructions, refer to the Bluetooth device's  
manual.  
Bluetooth device  
• When the Home Theater is disconnected from the  
Bluetooth device, the Home Theater will display  
DISCONNECTED on the front display.  
Check if the Bluetooth device supports the Bluetooth  
compliant stereo headset function.  
1.  
2.  
Press the FUNCTION button on the remote control  
To disconnect the Home Theater from the  
of the product to display the BT message.  
Bluetooth device  
Select the Bluetooth menu on the Bluetooth device  
you want to connect. For instructions, refer to the  
Bluetooth device's manual.  
Press the (  
) button on the front panel of the Home  
Theater to switch from BT to another mode or turn off the  
Home Theater.  
3.  
4.  
Select the Stereo headset menu on the Bluetooth  
• Except when you disconnect the home theater by  
changing functions, the connected Bluetooth device  
will wait a certain time for a response from the  
Home Theater before terminating the connection.  
(Disconnection time may differ, depending on the  
Bluetooth device.)  
device.  
You will see a list of devices  
Select "[HTS]Fxxxxx" from the searched list.  
• When the Home Theater is connected to the  
Bluetooth device, the device name of the  
connected Bluetooth device, followed by the  
name of home theater will appear on the front  
display of home theater.  
| NOTES |  
In Bluetooth connection mode, the Bluetooth  
\
connection will be lost if the distance between the  
Home Theater System and the Bluetooth device  
exceeds 32.8 feet. When the Bluetooth device comes  
back into effective range or you restart the Bluetooth  
device, you have to pair the device and home theater  
again to reconnect.  
5.  
Play music on the connected device.  
You can listen to the music playing on the  
connected Bluetooth device over the Home  
Theater system.  
| NOTES |  
In Bluetooth mode, the screen saver will start if  
\
The Home Theater only supports Middle Quality SBC  
\
the Bluetooth device stays in the Ready state for 5  
minutes. To reconnect the Bluetooth device, turn off  
the screen saver, and then connect the device. To turn  
off the Screen saver, press any button on the remote  
control (the Volume button, a number button, etc.)  
data (up to 237kbps@48kHz), and does not support  
High Quality SBC data ([email protected]).  
The AVRCP feature is supported. It's functionality  
will differ, depending on the specifications of the  
connected device.  
\
|
English  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Media Play  
You can't enlarge the subtitle and PG graphic in the  
full screen mode.  
\
Playing Photo Contents  
You can play photo contents located on a DVD, USB,  
mobile device or PC.  
Using the View and Options Menus  
When You See the Photo File List  
Using the Tools Menu  
Photos  
During playback, press the TOOLS button.  
Groups all the photo files  
Select to move to the previous  
on the media or storage  
Previous  
picture.  
Date  
device by Date. Click a  
group to see the photos in  
that group.  
Next  
Select to move to the next picture.  
Start / Stop  
Select to play/pause the slide show.  
Slide Show  
View  
Displays all the photo files  
on the media or storage  
device by title.  
Title  
Speed : Select to set a slide  
show's speed.  
Slideshow  
Settings  
Effects : Select to set a slide  
Displays all the folders  
on the media or storage  
device.  
show's special effects.  
Folder  
Select to enlarge the current  
Zoom  
picture. (Enlarge up to 4 times)  
Starts the slide show.  
Shows all the files in the  
current folder, one after  
Select to rotate the picture. (This will  
rotate the picture either clockwise  
or counter clockwise.)  
Rotate  
Slide Show another. If you want to  
create a slide show with a  
Background  
Music  
Select to listen to music while  
selected group of photos,  
viewing a slide show.  
see Play Selected below.  
Picture Mode  
Play Selected lets you  
-
-
-
-
Dynamic : Choose to increase  
create a playlist by  
Sharpness.  
selecting specific files to  
Play  
play. It works essentially  
the same way for all  
media. See Creating a  
Playlist on an Audio CD  
on page 35.  
Standard : Choose for most  
Selected  
viewing applications.  
Options  
Movie : This is the best setting  
Settings  
for watching movies.  
User : Lets you adjust the  
sharpness and noise reduction  
function respectively.  
Select Send to upload  
selected files to on line  
sites (Picasa, Facebook  
etc) or devices. To use  
Send, you need to  
Information : Shows the picture  
information.  
Send  
Customize your own personal  
sound preferences using the  
equalizer settings.  
Equalizer  
Mode  
establish an account with  
the on-line site, and then  
log in using the Log In  
function.  
Equalizer  
This function is only available when  
Settings  
Equalizer Mode is On.  
| NOTES |  
| NOTES |  
Depending on the disc or storage device, the Options  
menu may differ. All options may not be displayed.  
\
Depending on the disc or storage device, the Options  
menu may differ. All options may not be displayed.  
To enable the background music function, the photo  
file must be in the same storage media as the music  
file. However, the sound quality can be affected by the  
bitrate of the MP3 file, the size of the photo, and the  
encoding method.  
\
\
|
38  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Listening to Radio  
Using the Special Effects Remote  
Control Buttons  
Using Buttons on the Remote Control  
SOUND  
1.  
2.  
Press the FUNCTION button to select FM.  
SOUND EFFECT Function  
EFFECT  
Tune to the desired station.  
• Preset Tuning 1 : Press the MANUAL/PRESET  
Lets you select a mode that optimizes the sound.  
button to select Preset and then press the  
TUNING/CH (  
) button to select the preset  
,.  
1.  
Press the SOUND EFFECT button.  
station.  
2.  
Press the ▲▼ buttons to select the desired  
-
Before you can tune to preset stations, you  
mode: DSP, Dolby Pro Logic II or SFE Mode.  
must add preset stations to the product's  
memory. See Presetting Stations below.  
3.  
Press the ◄► buttons to select the desired  
sound effect.  
• Manual Tuning : Press the MANUAL/PRESET  
button to select Manual and then press the  
K
DSP  
TUNING/CH (  
) button to tune to a lower or  
,.  
MP3 Enhancer Power Bass Football   
higher frequency.  
Virtual 7.1 Off  
• Automatic Tuning : Press the MANUAL/PRESET  
MP3 Enhancer : Helps enhance your sound  
experience (ex. mp3 music). You can upscale your  
MP3 level sound (24 kHz, 8bit) to CD level sound  
(44.1 kHz, 16bit).  
button to select Manual and then press and hold  
the TUNING/CH (  
) button to automatically  
,.  
search the band.  
Power Bass : Increases the volume level of bass  
Setting Mono/Stereo  
tones and provides thudding sound effects.  
Press the MO/ST button.  
Football : Creates a more dynamic, realistic,  
stadium like sound. For listening to football, soccer,  
and other sporting events.  
• Each time you press the button, the sound switches  
between STEREO and MONO.  
• In a poor reception area, select MONO for a clear,  
Virtual 7.1 : Creates a virtual 7.1 CH sound using  
interference-free broadcast.  
the 5.1 CH speaker system.  
Off : Select for normal listening.  
Presetting Stations  
K
Dolby Pro Logic II  
Example : Presetting FM 89.10 into memory.  
Movie Music Game Matrix Pro Logic Off  
1.  
Press the FUNCTION button to select FM.  
Movie : Adds realism to a movie soundtrack.  
2.  
Press the TUNING/CH (  
) button to select  
,.  
Music : When listening to music, you can  
experience sound effects as if you are listening to  
the actual performance.  
<89.10>.  
3.  
4.  
Press the TUNER MEMORY button.  
• NUMBER flashes on the display.  
Press the TUNER MEMORY button again.  
Game : Enhances the excitement of the games  
sound.  
• Press the TUNER MEMORY button before  
Matrix : Select to hear multi channel surround  
Pro Logic : Select to listen to a 2CH sound source  
NUMBER disappears from the display on its own.  
sound.  
• After you press the TUNER MEMORY button,  
NUMBER disappears from the display and the  
station is stored in memory.  
in 5.1CH surround sound with all speakers active.  
-
A specific speaker(s) may not output depending  
on the input signal.  
5.  
To preset another station, repeat steps 2 to 4.  
To tune to a preset station, press the MANUAL/  
Off : Select for normal listening.  
PRESET button to select Preset and then press  
the TUNING/CH (  
) button to select the  
,.  
preset station.  
|
English  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Media Play  
K
K
SFE Mode  
Use TV SOUND:  
Symphony Hall in Boston (Hall 1) Philharmonic  
Hall in Bratislava (Hall 2) Jazz Club in Seoul B   
Church in Seoul Amphitheater (Rock) Off  
1) When you want to listen to the TV's audio  
through the home theater speakers.  
2) When you want to listen to the audio from a USB  
device plugged into the TV through the home  
theater speakers.  
Symphony Hall in Boston (Hall 1) : Provides a  
clear vocal as if listening in a concert hall.  
Philharmonic Hall in Bratislava (Hall 2) : Also  
provides a clear vocal as if listening in a concert hall  
but, less powerful than HALL1.  
K
TV SOUND ON/OFF support specification  
Anynet+  
(HDMI-CEC)  
Setting  
TV  
TV  
OFF  
O
Jazz Club in Seoul B : Recommended setting for  
Connected TV  
Sound Sound  
Jazz.  
ON  
O
Church in Seoul : Gives the feel of being in a grand  
church.  
Anynet+  
ON  
Amphitheater (Rock) : Recommended setting for  
(HDMI-CEC)  
supported TV  
Rock.  
OFF  
O
X
Off : Select for normal listening.  
Anynet+  
(HDMI-CEC) not  
supported TV  
No operation  
O
X
3D Sound  
You can enjoy more natural and vivid surround sound  
with enriched tones by adjusting the depth of sound  
using the level options.  
Off High Low  
| NOTES |  
3D Sound is not available in FM mode.  
\
TV SOUND  
TV Sound  
If you have a TV that supports Anynet+ (HDMI-CEC),  
the TV SOUND button lets you direct the TV's audio  
to the Home Theater Speakers or the TV Speakers. To  
use, follow these steps:  
1.  
2.  
3.  
Connect an HDMI cable to the TV and home  
theater. (See page 17.)  
Set Anynet+ (HDMI-CEC) On in the home  
theater and TV.  
Press the TV SOUND button on the remote  
control. TV SOUND ON flashes on the display  
on the front panel, and then changes to D. IN.  
• When TV SOUND is on, TV audio outputs  
through the Home Theater speakers.  
4.  
Press the TV SOUND button again to turn TV  
SOUND off.  
• When TV SOUND is off, TV audio outputs  
through the speakers of the connected  
Anynet+ TV.  
|
40  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Network Services  
If you press the RED (A) button after you have logged  
in, the My Account pop-up appears. On the pop-up,  
you can select Logout, Change Account Information,  
Link Service Accounts, Remove Accounts from the  
Device, and Deactivate Account.  
You can enjoy various network services such as streaming  
video or on-line apps by connecting the product to your  
network.  
\
\
To use network services, you must first:  
To rent movies and purchase for pay apps,you must  
have a credit card registered in your account. If you  
haven’t registered a card, select Change Account  
Information. On the Change Account information  
1.  
2.  
Connect the product to the network.  
(See page 18)  
Configure the network settings.  
(See pages 24~26)  
page, select Register Card, press the  
button,  
E
and then follow the directions on the screen.  
Logging In to Your Samsung  
Account  
Before Using Movies & TV Shows  
or Apps  
Before you access Movies & TV Shows or Apps, we  
suggest you log in to your Samsung account.  
If you haven’t set up Smart Hub, when you use Movies  
& TV Show or Apps for the first time, the product will ask  
you to perform the Smart Hub set up procedure.  
To log in to your Samsung account, follow these steps:  
1.  
2.  
3.  
With the Home screen displayed, press the RED (A)  
1.  
On the Home screen, select either Movies & TV  
button. The Log In screen appears.  
Shows or Apps, and then press the  
button. If  
E
Select the Email field, and then press the  
E
you have selected Apps, go to Step 4.  
button. The keyboard pop-up appears.  
2.  
If you selected Movies & TV Shows, the Smart Hub  
Using the keyboard, enter your e-mail address.  
pop-up appears asking if you want to set up Smart  
When finished, select the Done button, and then  
Hub. Select Yes, and then press the  
button.  
E
press the  
button. The Log In screen re-appears.  
E
The Welcome screen appears.  
4.  
5.  
Select the Password field, and then press the  
E
3.  
4.  
Select Start, and then press the  
button. The  
E
button. The keyboard pop-up appears.  
Smart Hub Terms & Conditions, Privacy Policy  
screen appears.  
Using the keyboard, enter your password. When  
finished, select the Done button, and then press the  
On the Smart Hub Terms & Conditions, Privacy  
Policy screen, you must review and agree to both  
the Smart Hub Terms and Conditions and the  
Privacy Policy to use Smart Hub.  
button. The Log In screen re-appears.  
E
6.  
7.  
To make the log in process easier next time, select  
Sign me in automatically, and then press the  
E
button.  
5.  
6.  
Scroll down, and then click the View Details buttons  
to review the full documents.  
Select Log In, and then press the  
button. The  
E
product logs you in to your account. Your account  
When done reading, scroll up to the first entry field,  
e-mail is displayed on the bottom left of the screen.  
and press the  
button to agree to the Terms and  
E
Conditions and consent to the Privacy Policy.  
| NOTES |  
7.  
8.  
9.  
Press the ► button twice to go to the Supplemental  
If you selected Sign me in automatically, the next  
\
Privacy Notices screen.  
time you log in, the product will automatically enter  
your e-mail and password. All you need to do is select  
Log In.  
Click the View Details button to view the entire  
notice.  
If your e-mail address and password are not displayed  
when the Log In screen appears, select the button  
with the down pointing arrow head next to the Email  
\
When done reading, scroll up to the top entry field,  
and then press the  
button.  
E
| NOTES |  
field, and then press the  
button. A drop down list  
E
You do not need to consent to the Supplemental  
Privacy Notice, but one or more Smart TV features or  
functionalities may not be available if you do not.  
of all your registered accounts will appear. Select your  
account, and then press the button. The product  
\
E
will fill in the e-mail and password fields.  
10. Press the ► button twice. The Setup Complete  
screen appears. Press the  
button.  
E
|
English  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Network Services  
If you don't have a credit card associated with your  
Samsung account, after you log in, the Register  
Card screen will appear. Follow the directions on the  
screen. You must have a credit card registered to your  
account to rent movies and to purchase for-pay apps.  
\
Using Movies & TV Shows  
You can download or stream for pay and free-of-charge  
movies and TV shows and view them on your TV.  
Movies & TV Shows  
Featured  
Recommended  
Using Apps  
You can download the applications from the Internet, and  
access various for pay or free-of-charge application and  
view them on your TV. To access some applications, you  
need to have a Samsung account.  
The Apps Screen at a Glance  
Favorites  
TV Shows  
Movies  
Purchased  
Recommended  
1.  
2.  
On the Home screen, select Movies & TV Shows,  
1
2
3
2
3
4
5
Samsung  
1
TV  
and then press the  
button.  
E
My Apps  
Select one of the Featured or Recommended  
Web Browser  
Apps  
Apps  
movies, and then press the  
for that movie appears.  
button. The page  
E
OR  
Use the ▼ button to go to the bottom of the screen.  
Downloaded  
Select Favorites, Featured, TV Shows, Movies, or  
4
Purchased, and then press the  
button.  
E
On the page that appears, use the ▲▼◄► buttons  
to select a show or movie, and then press the  
E
Recommended : Displays recommended  
button.  
contents managed by Samsung.  
1
Gives you access to various for pay or free-of-  
On the TV Shows or Movies screen, you can also  
select What’s New, Most Popular, or Genres to  
see more available shows or movies. On the Genre  
screen, use the ▲▼◄► buttons to select a Genre,  
charge applications you can download.  
Featured Applications : Use the ▲▼◄►  
buttons to highlight the displayed Feature  
and then press the  
button.  
E
Application, and then press the  
button.  
2
E
To make a selection on a page displaying TV shows  
or movies, use the ▲▼◄► buttons to make a  
Information about the featured application  
appears.  
selection, and then press the  
button.  
E
My Apps : Displays your personal gallery of  
applications modifiable on the All Downloaded  
screen.  
3.  
4.  
To watch a selection, select Watch now, and then  
3
4
press the  
button. A selection screen appears  
E
listing various locations from which you can rent the  
film along with prices.  
Downloaded : Select Downloaded to access  
the All Downloaded screen where you can add  
to, modify, and delete applications and see all  
downloaded applications.  
Select a location, and then press the  
button.  
E
Follow the directions on the screen to start the  
movie.  
| NOTES |  
If you haven't logged into your Samsung account,  
\
the Log in screen will appear after Step 3 and you will  
need to log in.  
|
42  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Downloading Applications  
Starting an Application  
You can download for pay or free-of-charge applications  
through Samsung Apps.  
1.  
2.  
Select Apps on the Home screen, and then press  
the  
button.  
E
1.  
On the Apps screen, select Samsung Apps, and  
On the Apps screen, use the ▲▼◄►buttons to  
then press the  
button. The Samsung Apps  
E
select an app, and then press the  
app starts.  
button. The  
E
screen appears.  
2.  
Across the top of the screen, under What’s  
New, you'll see a series of new apps. Use the  
◄► buttons to scroll the list right or left, and  
Using the All Downloaded Screen  
then select an app. Press the  
button to see  
E
more information about the app. If the app is free,  
All Downloaded  
View : Date Downloaded  
Edit  
select Download, and then press the  
button  
E
to download the app. If it is a for-pay app select  
1
/23  
Buy, press the  
button, and then follow the  
E
Web Browser  
Samsung Apps  
instructions on the screen.  
| NOTES |  
To buy an app, you must be logged into your  
\
Samsung account and have a credit card registered to  
the account. Press the RED (A) button on your remote  
to log in.  
Web Browser  
Category  
:
XXXXX  
|
Version  
:
X.XXX  
|
Size  
:
XX.XKB  
Contact Info  
:
[email protected] (If you need to contact us, please use this address.)  
If you haven’t registered a card, after you log in, press  
the RED (A) button again, and then select Change  
Account Information in the pop-up that appears. On  
the Change Account information page, select Register  
\
The All Downloaded Screen lists all the apps you have  
downloaded and lets you:  
• Sort the apps on the All Downloaded screen by Date  
Card, press the  
button, and then follow the  
Downloaded, Recently Opened, and Title.  
E
directions on the screen.  
• Apply a number of Edit Menu functions to the apps  
listed in the My Apps section of the Apps screen  
including updating apps, moving apps into a folder,  
deleting the apps from My Apps, and locking the apps.  
You can also access and download apps from  
the categories listed on the left of the screen. For  
instructions, see Step 4.  
\
3.  
After the app has downloaded, select Run, and  
• Start apps.  
then press the  
button to run the app now.  
E
To run the app later, press the RETURN button. In  
either case, the icon for the app will appear on the  
Apps screen.  
Sorting the Apps  
To sort the apps on the All Download screen, follow these  
steps:  
4.  
5.  
To see additional apps, use the ▲▼◄► buttons  
to move to the category list on the left side of the  
screen.  
1.  
2.  
On the Home screen, select Apps, and then press  
the  
button.  
E
On the Apps screen, use the ▼ button to move to  
the Downloaded hotspot at the bottom of the page,  
Use the ▲▼ buttons to select a category. Each  
time you move the highlight to another category, a  
different set of applications appears on the right.  
and then press the  
button.  
E
3.  
4.  
On the All Downloaded screen, use the ▲► buttons  
6.  
7.  
8.  
Use the ► button to move to the applications and  
to move to View at the top of the screen, and then  
the ▲▼◄► buttons to move from app to app.  
press the  
button.  
E
To see more information about an app, select it, and  
In the drop down that appears, select Date  
then press the  
button.  
E
Downloaded, Recently Opened, or Title, and  
To download the app, follow the directions in Steps  
then press the  
button. The apps on the All  
E
2 and 3.  
Downloaded screen are sorted by the criteria you  
have chosen.  
|
English  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Network Services  
Delete an App from My Apps  
Using the Edit Menu Functions  
Lock / Unlock  
1.  
On the All Downloaded screen, use the ▲► buttons  
to go to Edit at the top of the screen, and then  
press the  
button.  
E
Using the Lock / Unlock function and the Security PIN,  
you can lock applications so they cannot be started on  
either the Apps screen or the All Downloaded screen. The  
default PIN is 0000.  
2.  
3.  
Select Edit My Apps, and then press the  
E
button. The Edit My Apps screen appears.  
Select the app you want to delete from My Apps,  
press the  
button, and then press the ▲▼◄►  
E
1.  
On the All Downloaded screen, use the ▲► buttons  
buttons in the direction of the  
.
to go to Edit at the top of the screen, and then  
The Remove from My Apps pop-up appears.  
press the  
button.  
E
4.  
5.  
Select Yes, and then press the  
button.  
E
2.  
3.  
4.  
Select Lock / Unlock, and then press the  
E
button.  
When you return to the Apps screen, the app will  
have been removed from the My Apps area.  
When the Lock Service appears, enter the PIN  
using the number buttons on your remote control.  
Move an App in My Apps  
To lock an application, select the application, and  
1.  
On the All Downloaded screen, use the ▲► buttons  
then press the  
button. A lock appears on the  
E
to go to Edit at the top of the screen, and then  
app. Repeat to lock other, individual apps.  
press the  
button.  
E
5.  
6.  
To unlock a locked app, select the application, and  
2.  
3.  
Select Edit My Apps, and then press the  
then press the  
button.  
E
E
button. The Edit My Apps screen appears.  
To lock all the apps at once, use the ▲► buttons to  
Select the app you want to move in My Apps, press  
select the Lock All button, and then press the  
E
the  
button, and then press the ▲▼◄► buttons  
button.  
E
to move the app icon in the direction of one of the  
arrows (<, >, ^, etc.) that appears around the app  
icon. The app icon moves in the direction you have  
chosen.  
7.  
8.  
To unlock all the locked apps at once, use the ▲►  
buttons to select the Unlock All button and then  
press the  
button.  
E
Press the RETURN button twice to return to the  
Apps screen. Locked apps will display a lock on the  
upper right side.  
4.  
5.  
After you have placed the app icon where you want,  
press the  
button.  
E
When you return to the Apps screen, the app will be  
Edit My Apps  
positioned in the location you had selected.  
Edit My Apps lets you add apps to and delete apps from  
My Apps. It also lets you change the position of an app in  
My Apps.  
Create Folder  
Create Folder lets you create a folder on the Downloaded  
screen into which you can put apps.  
Add an App to My Apps  
1.  
2.  
On the All Downloaded screen, use the ▲► buttons  
to go to Edit at the top of the screen, and then  
1.  
On the All Downloaded screen, use the ▲► buttons  
press the  
button.  
E
to go to Edit at the top of the screen, and then  
press the  
button.  
E
Select Create Folder, and then press the  
E
button. The Set Folder Name pop-up appears.  
2.  
3.  
Select Edit My Apps, and then press the  
E
button. The Edit My Apps screen appears.  
3.  
4.  
Press the  
button. The keyboard appears.  
E
Select a full color app from the top row of apps, and  
Select the Clear button on the right side, and then  
then press the  
button. The full color app icon  
E
press the  
button to remove Folder 1 from the  
E
appears in the My Apps area below and the app  
entry field. Then, using the keyboard, enter the  
icon in the top row is grayed out.  
name you want to apply to the folder.  
5.  
6.  
When finished, select the Done button on the right  
| NOTES |  
side, and then press the  
reappears.  
button. The pop-up  
E
Grayed out apps are already in My Apps.  
\
4.  
When you return to the Apps screen, the app will  
appear in the My Apps area.  
Select OK, and then press the  
button. The new  
E
folder appears in the list of apps on the left side of  
the screen.  
|
44  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6.  
7.  
Select OK, and then press the  
button. The  
E
Move to Folder  
folder is renamed.  
Move to Folder lets you move apps to the folder of your  
Select Close on the right side of the screen, and  
choice.  
then press the  
button.  
E
1.  
On the All Downloaded screen, use the ▲► buttons  
to go to Edit at the top of the screen, and then  
Delete  
press the  
button.  
E
Delete lets you delete apps and folders from the My  
Apps screen. If there are apps in a folder, both the folder  
and the apps are deleted together. Delete removes apps  
permanently. If you decide you want to use an app you  
deleted, you will need to download it again.  
2.  
3.  
Select Move to Folder, and then press the  
E
button. The Move to Folder screen appears.  
Use the ▲▼◄► buttons to move to an app, and  
then press the  
button to select the app. A  
E
check appears in the upper left corner of the app.  
1.  
On the All Downloaded screen, use the ▲► buttons  
4.  
5.  
To deselect an app, press the  
button. The  
E
to go to Edit at the top of the screen, and then  
check disappears.  
press the  
button.  
E
Repeat Step 3 to select additional apps.  
2.  
3.  
Select Delete, and then press the  
button. The  
E
Delete screen appears.  
| NOTES |  
Use the ▲▼◄► buttons to move to an app, or  
To select all the downloaded apps, select Select All  
\
folder and then press the  
button to select. A  
E
at the top right of the screen, and then press the  
E
check appears in the upper left corner of the app or  
button. To deselect all the apps, select Deselect All  
folder you selected.  
at the top right of the screen, and then press the  
E
4.  
5.  
To deselect an app, press the  
check disappears.  
button. The  
E
button.  
6.  
7.  
When done, select Select folder at the top of the  
screen, and then press the  
folder pop-up appears.  
button. The Select  
Repeat Step 3 to select additional apps or folders.  
E
| NOTES |  
In the Select folder pop-up, use the ▲▼ buttons  
To select all the downloaded apps, select Select All  
\
to select the folder you want to move the apps you  
at the top right of the screen, and then press the  
E
selected to, and then press the  
button.  
E
button. To deselect all the apps, select Deselect All  
8.  
9.  
The Apps Moved pop up appears. Press the  
E
at the top right of the screen, and then press the  
E
button.  
button.  
To open the folder, use the ▲▼◄► buttons to  
6.  
7.  
After you have made all your selections, select  
highlight the folder, and then press the  
button.  
E
Delete at the top of the screen, and then press the  
button. The deleting pop-up appears.  
E
Rename Folder  
Select Yes, and then press the  
button. All the  
E
apps you selected are deleted.  
Rename Folder lets you rename an existing folder.  
1.  
2.  
3.  
On the All Downloaded screen, use the ▲► buttons  
| NOTES |  
to go to Edit at the top of the screen, and then  
You cannot immediately delete a locked app or  
folder. If you select a locked app or folder to delete,  
when you perform Step 7, the Lock Service pop-up  
appears. Enter the Security PIN into the pop-up, and  
\
press the  
button.  
E
Select Rename Folder, and then press the  
E
button. The Rename Folder screen appears, and a  
folder is highlighted.  
then press the  
button. The lock will be released  
E
and the app or folder will be deleted.  
User the ▲▼◄► buttons to highlight a folder of  
your choice, and then press the  
button. The  
E
Update Apps  
Rename pop-up appears.  
4.  
5.  
Press the  
button. The keyboard appears.  
Update Apps automatically searches the Internet for  
updated versions of the apps you have downloaded and  
updates them if it finds newer versions.  
E
Enter the new name for the folder. When finished,  
select Done on the right side, and then press  
the  
button. The Rename popup reappears  
1.  
On the All Downloaded screen, use the ▲► buttons  
E
displaying the new name.  
to go to Edit at the top of the screen, and then  
press the  
button.  
E
2.  
Select Update Apps, and then press the  
E
button.  
|
English  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Network Services  
Bluetooth transmissions can interfere with the Screen  
Mirroring signal. Before using the Screen Mirroring  
function, we strongly recommend that you turn off  
the Bluetooth function on your smart phone or smart  
device.  
3.  
4.  
5.  
The unit searches the Internet for newer versions of  
your apps. If there are new apps, the Update Apps  
pop-up appears.  
\
To download the update for a particular app,  
highlight the app, and then press the  
button.  
E
A check appears to the left of the app.  
Using the Web Browser  
To deselect the app, highlight it, and then press the  
button.  
E
You can access the Internet using the Web Browser  
application.  
| NOTES |  
To select all the updates, select Select All on the  
Select Web Browser on the Home screen, and then  
\
press the  
button.  
right of the pop-up, and then press the  
button. To  
E
E
deselect all the updates, select Deselect All, and then  
| NOTES |  
press the  
button.  
E
When you run the Web Browser with the product  
connected by HDMI to a BD Wise compatible TV -  
and BD Wise is on - the browser is maximized to fill  
the screen and the TV's resolution is set to the optimal  
resolution automatically.  
\
6.  
7.  
After you have selected the updates you want to  
download, select Update on the right side of the  
pop-up, and then press the  
button.  
E
The unit downloads the updates you have chosen.  
A download bar appears in each app icon as the  
update for that app is downloaded. The download  
is complete when the download bars disappear.  
The Web Browser is not compatible with Java  
applications.  
\
\
\
If you attempt to download a file, and the file cannot  
be saved, an error message will appear.  
E-commerce (purchasing products online) is not  
supported.  
Screen Mirroring  
The Screen Mirroring function lets you view the screen of  
your smart phone or smart devices on the TV you have  
connected to the home theater system.  
ActiveX is not supported.  
\
\
Access may be blocked to some websites or to web  
browsers operated by certain businesses.  
1.  
With the Blu-ray's Home screen displayed, press  
the BLUE (D) button on the remote. The Screen  
Mirroring screen appears.  
Link Browsing and Pointer Browsing  
The Web Browser provides two types of browsing,  
Pointer Browsing and Link Browsing. When you launch  
the browser for the first time, Pointer Browsing is active.  
If you are using a mouse to navigate in the Web Browser,  
we recommend leaving Pointer Browsing active. If you  
are using your remote to navigate in the Web Browser,  
we recommend that you replace Pointer Browsing with  
Link Browsing. Link Browsing moves a highlight from one  
link to the next in the Web Browser and is much faster  
than Pointer Browsing if you are using your remote.  
2.  
3.  
Launch AllShare Cast or Miracast on your device.  
On your device, find the name of the home theater  
system in the list of available devices and then  
select it.  
4.  
The TV displays a connecting message (for  
example, Connecting to Android_92gb...) and then  
displays the connected message.  
5.  
In a few moments, the screen of your device  
appears on the TV screen.  
To activate Link Browsing, follow these steps:  
| NOTES |  
1.  
Use the ▲▼◄►buttons on your remote to move  
the pointer to the Link Browser icon on the top right  
of the screen. The Link Browser icon is the third  
icon from the right.  
When you are using the Screen Mirroring function,  
\
video stuttering or audio dropouts may occur,  
depending on your environment.  
Before using the Screen Mirroring function, confirm  
that your smart phone has a compatible function.  
Depending on your smart phone, the Screen Mirroring  
function may have a different name (AllShare Cast,  
etc.).  
The pointer will be in the correct position if the icon  
turns blue and the words “Link Browsing” appear  
on the screen.  
\
2.  
Press the  
button. Link Browsing is activated  
E
and will remain active whenever you bring up the  
Web Browser.  
|
46  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The Control Panel at a Glance  
Using the Keyboard Pop-up  
The Control Panel, which runs across the top of the  
screen, has a series of icons which start a number of  
useful functions. The icons are described below, starting  
with the icon on the far left of the screen.  
When you click the  
, the  
or access a data or text entry field, and  
then press the  
button, the keyboard pop-up appears.  
E
1
Caps  
1
q
a
z
2
w
s
3
e
d
c
4
r
5
t
6
y
h
n
7
u
j
8
i
9
o
l
0
p
~
?
Clear  
^
@
-
*
!
123#&  
ENG  
f
g
b
k
,
Done  
Cancel  
x
v
m
.
.com  
4
To use the keyboard pop-up with your remote, follow  
these steps:  
1.  
2.  
3.  
Use the ▲▼◄► buttons on your remote to move  
the highlight to a letter or number of your choice.  
: Moves to the previous page.  
: Moves to the next web page.  
Press the  
button to enter the letter or number  
E
into the entry field.  
: Displays the Bookmarks and History  
screen. You can bookmark the current page,  
select an existing bookmark, and edit and  
delete bookmarks. You can also view your  
browsing history and select a page to revisit.  
To access capital letters, move the highlight to the  
Caps key on the top left, and then press the  
E
button. Press the  
button again with the Caps  
E
key highlighted to access small letters again.  
4.  
5.  
6.  
7.  
To access symbols and additional punctuation  
: Moves to the Home screen of the Web  
Browser.  
marks, highlight the 123#& button on the left, and  
then press the  
button.  
E
: Lets you enter a  
To delete a character you entered, move the  
page address manually using the keyboard  
pop-up.  
highlight to the button, and then press the  
E
button.  
: Reloads the current page so that it is  
refreshed on the screen.  
To delete all the characters you entered, move the  
highlight to the Clear button, and then press the  
1
: Adds the current page to your  
bookmarks.  
button.  
E
When finished entering, move the highlight to the  
: Lets you search for  
information by entering words or characters  
using the keyboard pop-up. See Using the  
Keyboard Popup on this page.  
Done button, and then press the  
button.  
E
| NOTES |  
If you have a wireless keyboard connected to your  
product, you can use the wireless keyboard to enter  
letters, numbers, symbols, and punctuation. Note  
that the wireless keyboard will work only when the  
keyboard popup appears and can only be used to  
enter letters, numbers, symbols, and punctuation.  
\
: Lets you enlarge or shrink the  
screen by various percentages.  
: Turns on the PIP function.  
: Lets you switch between Pointer  
Browsing and Link Browsing.  
: Lets you configure the Browsers  
settings. See Using the Setting Menu on  
page 48.  
: Closes the Web Browser.  
|
English  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Network Services  
Options on the Keyboard Pop-Up  
Provides an easy-to-read page by  
enlarging the main text.  
Reading  
Tools  
To access the keyboard pop-up options, highlight the  
Reading Tools is not available for all  
button on the bottom left of the keyboard, and then press  
pages.  
the  
button.  
E
Lets you restrict your childrens  
access to inappropriate web pages  
by allowing access only to the web  
sites you have registered.  
Select the language for the  
keyboard. You can select English,  
French, Russian, etc.  
Language  
Every time you access Approved  
Sites, the PIN screen appears. The  
first time you access Approved  
Sites, enter the default PIN, 0000  
using the number buttons on your  
remote.  
The keyboard will suggest  
recommended words as you enter  
text. You can turn this function On  
or Off.  
Recommended  
Text  
The keyboard will predict the next  
letter as you enter letters. The  
predictions appear in a ring around  
the letter you have just entered.  
You can select a predicted letter or  
move to another letter. You can turn  
this function On or Off.  
You can change the PIN using the  
Reset password for the Approved  
Sites function. See below.  
Predict Next  
Letter  
Approved Sites feature : Turns  
the Approved Sites function on  
or off.  
Approved  
Sites  
Reset password for Approved  
Sites : Change the Approved  
Sites password.  
Using the Setting Menu  
The Setting menu contains functions that control how  
the Browser operates and Browser security functions.  
Add current site : Lets you add  
the currently displayed web site  
to the Approved Sites list.  
To open the Setting menu, highlight the  
icon in the  
Control Panel, and then press the  
button. To select  
E
Manage Approved Sites : Lets  
you key in URLs to add to the  
Approved Sites List and delete  
sites from the Approved Sites  
list. If you turn Approved Sites  
on and have not added any sites  
to the Approved Sites list, you  
will not be able to access any  
Internet sites.  
an option in the setting menu, highlight the option, and  
then press the  
button.  
E
Enable Grabbing  
Reading Tools  
Approved Sites  
Private browsing off  
Web Browser Settings  
Help  
Close  
Enable or disable the Privacy mode.  
When the Privacy mode is enabled,  
the browser does not retain the  
URLs of sites you visit. If you want  
to enable Privacy mode, select OK.  
Private  
Browsing  
On/Off  
If the Privacy mode is running, the  
“Stop” icon appears in front of  
the URL at the top of the screen.  
To disable Privacy mode, select  
it again when Privacy mode is  
enabled.  
Turns the Grabber function on and  
off. When the Grabber function is  
on, you can move a web page up  
and down without dragging the  
scroll bar.  
Enable/  
Disable  
Grabbing  
The Grabber function is only  
available in Pointer Browsing.  
|
48  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5.  
6.  
Select Register, and then press the  
button.  
E
Set as homepage : You can set  
In the ID and Password screen, enter the ID you use  
to log in to the service you selected using the pop-  
up keyboard. When finished, select Done, and then  
the Browser's home page.  
Pop-up Block : Turns the Popup  
Block on and off.  
press the  
button.  
E
Page Block : You can determine  
whether to block advertisements  
and select the URLs for which  
advertisements are blocked.  
7.  
8.  
Repeat the same process for the password. When  
finished select Done, and then press the  
E
button.  
General : You can delete  
personal in information such as  
website history and browsing  
data (cookies, etc.), and reset  
all web browser settings to their  
factory defaults.  
Select OK, and then press the  
button.  
E
BD-LIVE™  
Web Browser  
Setting  
Once the product is connected to your network, you can  
enjoy various movie-related service contents available on  
BD-LIVE compliant discs.  
Encoding : You can set the  
Encoding setting for web pages  
to Automatic or select the  
encoding format manually from a  
list.  
1.  
Attach a USB flash drive to the USB jack on the  
front of the product, and then check its remaining  
memory. The memory device must have at least  
1GB of free space to accommodate the BD-LIVE  
services.  
Pointer : You can set the speed  
of the cursor when the cursor  
is set to Pointer and turn Smart  
Cursor On and Off.  
2.  
Select Settings on the Home screen, and then  
press the  
button.  
E
Browser Information : Displays  
the version number and copyright  
information for the Web Browser.  
3.  
4.  
Select Network, and then press the  
button.  
E
Select BD-Live Settings, and then press the  
E
button.  
Provides basic information about  
5.  
6.  
Select BD Data Management, and then press the  
Help  
the operation of the Web Browser.  
button.  
E
Select Select Device, and then press the  
E
| NOTES |  
button.  
Depending on the web site, some of the Web Browser  
Setting functions may not be activated. Functions that  
are not activated are greyed out and cannot be used.  
\
7.  
8.  
9.  
Select USB device, and then press the  
button.  
E
Insert a Blu-ray Disc that supports BD-LIVE.  
Select an item from the list of BD-LIVE service  
contents provided by the disc manufacturer.  
Linking your Internet Service  
Accounts to the Product  
| NOTES |  
The way you use BD-LIVE and the provided contents  
\
The Link Service Accounts function lets you link your  
product to your accounts with Internet services such as  
Pandora so that the product can log you in to the service  
automatically when you start the app for that service.  
may differ, depending on the disc manufacturer.  
To create a service account link, follow these steps:  
1.  
2.  
3.  
4.  
On the Home screen, press the RED (A) button on  
your remote to log in to your Samsung Account.  
After you have logged in, press the RED (A) button  
on your remote again.  
Select Link Service Accounts in the My Account  
pop-up, and then press the  
button.  
E
On the Link Service Accounts screen, select the  
service you want to link to the product, and then  
press the  
button.  
E
|
English  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix  
Digital Output  
Additional Information  
• Be sure to select the correct Digital Output or you  
will hear no sound or just loud noise.  
Notes  
• If the HDMI device (AV receiver, TV) is not  
compatible with compressed formats (Dolby Digital,  
DTS), the audio signal outputs as PCM.  
Connections  
HDMI OUT  
• Regular DVDs do not have BONUSVIEW audio and  
Navigation Sound Effects.  
• Certain HDMI output resolutions may not work,  
• Some Blu-ray Discs do not have BONUSVIEW  
audio and Navigation Sound Effects.  
depending on your TV.  
You must have a HDMI connection to enjoy videos  
with 3D technology.  
• This Digital Output setup does not affect the analog  
(L/R) audio or HDMI audio output to your TV.  
It affects the optical and HDMI audio output when  
your product is connected to an AV receiver.  
• A long HDMI cable may cause screen noise. If this  
occurs, set HDMI Deep Color to Off in the menu.  
• If you play MPEG audio soundtracks, the audio  
signal outputs as PCM regardless of your Digital  
Output selections (PCM or Bitstream).  
Settings  
3D Settings  
• Digital Output can be activated when Speaker  
• For some 3D discs, to stop a movie during 3D  
Selection is set to TV Speaker.  
playback, press the  
button once. The movie  
5
stops and the 3D mode option is de-activated.  
To change a 3D option selection when you are  
BD-Live Internet Connection  
• The Internet connection may be restricted while you  
playing a 3D movie, press the  
button once. The  
5
are using BD-LIVE contents.  
Blu-ray menu appears. Press the  
button again,  
5
then select 3D Settings in the Blu-ray menu.  
Anynet+ (HDMI-CEC)  
• Depending on the content and the position of the  
picture on your TV screen, you may see vertical  
black bars on the left side, right side, or both sides.  
• Depending on your TV, certain HDMI output  
resolutions may not work. Please refer to the user  
manual of your TV.  
TV Aspect Ratio  
• This function is not available if the HDMI cable does  
not support CEC.  
• Depending on the disc type, some aspect ratios  
• If your Samsung TV has an Anynet+ logo, then it  
may not be available.  
supports the Anynet+ function.  
• If you select an aspect ratio and option which is  
different than the aspect ratio of your TV screen, the  
picture might appear to be distorted.  
BD Data Management  
• If you select 16:9 Original, your TV may display 4:3  
• In the external memory mode, disc playback may  
be stopped if you disconnect the USB device in the  
middle of playback.  
Pillarbox (black bars on sides of picture).  
BD Wise (Samsung Products only)  
• Only those USB devices formatted in the FAT file  
system (DOS 8.3 volume label) are supported.  
We recommend you use USB devices that support  
the USB 2.0 protocol with 4 MB/sec or faster read/  
write speeds.  
• When BD Wise is on, the Resolution setting  
automatically defaults to BD Wise and BD Wise  
appears in the Resolution menu.  
• If the product is connected to a device that does  
not support BD Wise, you can not use the BD Wise  
function.  
• The Resume Play function may not work after you  
format the storage device.  
• The total memory available to BD Data Management  
For proper operation of BD Wise, set the BD Wise  
option in both the product and the TV to On.  
may differ, depending on conditions.  
Front Display  
You cannot change the brightness of the  
button  
and the VOL +, - button.  
|
50  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Speaker Settings  
Playing JPEG files  
• When Speaker Selection is set to TV Speaker,  
You can’t enlarge the subtitle and PG graphic in the  
audio is produced through the TV speakers.  
full screen mode.  
HDMI audio  
Media Play  
• When HDMI audio is output to the TV speakers, it is  
Dolby Pro Logic II Mode  
automatically down-mixed to 2 channels.  
• Before selecting Dolby Pro Logic II mode, connect  
your external device to the AUDIO INPUT jacks (L  
and R) on the product. If you connect to only one  
of the inputs (L or R), you cannot listen to surround  
sound.  
Audio Return Channel  
• When Anynet+ (HDMI-CEC) is Off, the Audio Return  
Channel function is not available.  
• Using an HDMI cable not certified for ARC (Audio  
Return Channel) may cause a compatibility problem.  
Using the TOOLS button while playing pictures  
• The ARC function is only available if an ARC-  
• If the system is connected to a BD Wise compliant  
TV that has set BD Wise to On, the Picture Settings  
menu will not appear.  
compliant TV is connected.  
Playback  
• The Background Music function will not work unless  
the music file and the photo file are located on the  
same storage media. Also, sound quality can be  
impacted by the bitrate of the MP3 music file, the  
size of the photos, and the encoding method.  
Playing Video files  
• Video files with high bitrates of 20Mbps or more  
strain the products capabilities and may stop  
playing during playback.  
Selecting the Audio Language  
• The ◄► indicator will not appear on the screen  
if the BONUSVIEW section does not contain any  
BONUSVIEW audio settings.  
• The languages available through the Audio  
Language function depend on the languages that  
are encoded on the disc. This function or certain  
languages may not be available.  
• Some Blu-ray Discs may allow you to select either  
the PCM or Dolby Digital audio English soundtrack.  
Selecting the Subtitle Language  
• Depending on the Blu-ray Disc / DVD, you may be  
able to change the subtitle language in the Disc  
Menu. Press the DISC MENU button.  
• This function depends on the selection of subtitles  
that are encoded on the disc and may not be  
available on all Blu-ray Discs/DVDs.  
• Information about the main feature BONUSVIEW  
mode will also appear if the Blu-ray Disc has a  
BONUSVIEW section.  
• This function changes both the primary and  
secondary subtitles at the same time.  
• The total number of primary and secondary subtitles  
are displayed respectively.  
|
English  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix  
Digital Output Selection  
Bitstream  
(Re-encoded  
Dolby D)  
Bitstream  
Bitstream  
Setup  
PCM  
(Unprocessed)  
(Re-encoded DTS)  
Connection  
HDMI supported AV receiver  
Re-encoded  
PCM  
Up to PCM 7.1ch  
Up to PCM 5.1ch  
Up to PCM 7.1ch  
Up to PCM 7.1ch  
Up to PCM 7.1ch  
PCM  
Dolby Digital  
Dolby Digital Plus  
Dolby TrueHD  
DTS  
DTS re-encoded  
Dolby Digital *  
Re-encoded  
Dolby Digital  
DTS re-encoded  
DTS re-encoded  
DTS re-encoded  
DTS re-encoded  
Dolby Digital *  
Dolby Digital  
Re-encoded  
Plus  
Dolby Digital *  
Dolby  
Re-encoded  
Audio  
TrueHD  
Dolby Digital *  
Stream on  
Blu-ray Disc  
Re-encoded  
DTS  
Dolby Digital *  
DTS-  
HD High  
Resolution  
Audio  
DTS-HD  
Master  
Audio  
PCM  
DTS-HD High  
Re-encoded  
Up to PCM 7.1ch  
Up to PCM 7.1ch  
DTS re-encoded  
Resolution Audio  
Dolby Digital *  
DTS-HD Master  
Audio  
Re-encoded  
DTS re-encoded  
Dolby Digital *  
PCM 2ch  
Up to PCM 5.1ch  
Up to PCM 7.1ch  
PCM 2ch  
Dolby Digital  
DTS  
PCM 2ch  
Dolby Digital  
DTS  
PCM 2ch  
Dolby Digital  
DTS  
Audio  
Stream on Dolby Digital  
DVD  
DTS  
Decodes the main  
feature audio and  
BONUSVIEW audio  
stream together  
into PCM audio and  
adds Navigation  
Sound Effects, then  
re-encodes the PCM  
audio into Dolby  
Digital bitstream or  
PCM.  
Outputs only the  
Decodes the main  
feature audio and  
main feature audio  
Decodes the main  
feature audio and  
BONUSVIEW audio  
stream together  
stream so that your BONUSVIEW audio  
AV receiver can  
decode the audio  
bitstream.  
stream together  
into PCM audio and  
adds Navigation  
Definition for  
Any  
Blu-ray Disc  
into PCM audio and  
adds Navigation  
Sound Effects.  
You will not hear  
BONUSVIEW audio  
Sound Effects, then  
re-encodes the  
or Navigation Sound PCM audio into DTS  
Effects.  
bitstream.  
If the Source Stream is 2ch or mono, “Re-encoded Dolby D” Setting are not applied. Output will be PCM 2ch.  
Blu-ray Discs may include three audio streams :  
-
-
-
Main Feature Audio : The audio soundtrack of the main feature.  
BONUSVIEW audio : An additional soundtrack such as the director or actors commentary.  
Navigation Sound Effects : When you choose some menu navigation, Navigation Sound Effects may sound.  
Navigation Sound Effects are different on each Blu-ray Disc.  
|
52  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Resolution according to the output mode  
Blu-ray Disc/E-contents/Digital Contents playback  
DVD playback  
HDMI Mode  
HDMI Mode  
Output  
E-contents/  
Setup  
Blu-ray Disc  
Resolution of Blu-ray  
Digital contents  
BD Wise  
1080p@60F  
480i  
Disc  
Auto  
Max. Resolution of TV input  
Max. Resolution of TV input  
1080p@60F  
Movie Frame : Auto (24Fs)  
1080p@60F  
1080p@24F  
1080i  
720p  
480p  
1080p@60F  
-
1080i  
720p  
480p  
1080i  
720p  
480p  
Troubleshooting  
Refer to the table below when this product does not function properly. If the problem you are experiencing is not listed  
below or if the instructions below do not help, turn off the product, disconnect the power cord, and contact Samsung  
Electronics at 1-800-SAMSUNG (1-800-726-7864).  
Symptom  
Check/Remedy  
I cannot eject the disc.  
• Is the power cord plugged securely into the outlet?  
Turn off the power and then turn it back on.  
Playback does not start.  
• Check the region number of the Blu-ray/DVD disc.  
Blu-ray/DVD disc purchased from abroad may not be playable.  
• CD-ROMs and DVD-ROMs cannot be played on this product.  
• Make sure that the rating level is correct.  
Playback does not start  
immediately when the  
Play/Pause button is  
pressed.  
• Are you using a deformed disc or a disc with scratches on the surface?  
• Wipe the disc clean.  
Sound is not produced.  
The home theater does not play sound during fast playback, slow playback,and step  
motion playback.  
Are the speakers connected properly? Is the speaker setup correctly customized?  
• Is the disc severely damaged?  
Sound can be heard only  
from a few speakers and  
not all 6.  
• On certain Blu-ray/DVD discs, sound is output from the front speakers only.  
• Check if the speakers are connected properly.  
• Adjust the volume.  
• When playing audio from a CD, the radio, or a TV, the unit outputs sound to the  
front speakers only.  
Dolby Digital 5.1 CH  
Surround Sound is not  
produced.  
• Is there "Dolby Digital 5.1 CH" mark on the disc? Dolby Digital 5.1 CH Surround Sound is  
produced only if the disc is recorded with 5.1 channel sound.  
• Is the audio language correctly set to Dolby Digital 5.1-CH in the information  
display?  
|
English  
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix  
Symptom  
Check/Remedy  
The remote control does  
• Are you operating the remote within its operational range and within the proper  
not work.  
angle relative to the sensor?  
• Are the batteries drained?  
• Have you selected the mode (TV/BD) functions of the remote control (TV or BD)  
correctly?  
The disc is rotating but  
• Is the TV power on?  
no picture is produced.  
• Are the video cables connected properly?  
• Is the disc dirty or damaged?  
Picture quality is poor  
and the picture is  
shaking.  
• A poorly manufactured disc may not be playable.  
Audio language and  
• Audio language and subtitles will not work if the disc does not contain them.  
• Are you using a disc that does not contain menus?  
subtitles do not work.  
The menu screen does  
not appear even when the  
menu function is selected.  
The aspect ratio cannot be  
You can play 16:9 Blu-ray/DVD discs in 16:9 Full mode, 4:3 Letter Box mode, or  
4:3 Pan-Scan mode, but 4:3 Blu-ray/DVD discs are played in 4:3 ratio only. Refer  
to the Blu-ray Disc jacket and then select the appropriate function.  
changed.  
The product is not  
working.  
• Press and hold the remote control's  
button for 5 seconds in STANDBY mode.  
5
This will reset the unit.  
(Example: The power  
goes out or a strange  
noise is heard.)  
-
Using the RESET function will erase all stored settings.  
Do not use this function unless necessary.  
The Product is not working  
normally.  
You have forgotten the  
rating level password.  
• With no disc in the product, press and hold the product's  
button for longer  
5
than 5 seconds. INIT appears on the display and all settings will return to the  
default values.  
Then, press the POWER button.  
-
Using the RESET function will erase all stored settings.  
Do not use this function unless necessary.  
Can't receive radio  
broadcasts.  
• Is the antenna connected properly?  
• If the antenna's input signal is weak, install an external FM antenna in an area with  
good reception.  
While listening to TV audio  
through the Product, no  
sound is heard.  
• If you press the OPEN/CLOSE button while listening to TV audio using the D.  
audio is muted.  
^
IN or AUX functions, the Blu-ray/DVD disc functions are turned on and the TV  
"Not Available" appears on • The features or action cannot be completed at this time because:  
screen.  
1. The Blu-ray/DVD disc's software restricts it.  
2. The Blu-ray/DVD disc's software doesn’t support the feature (e.g., angles)  
3. The feature is not available at the moment.  
4. You’ve requested a title or chapter number or search time that is out of range.  
If the HDMI output is set to • Press and hold the  
button on front panel for more than 5 seconds with no disc  
5
a resolution your TV cannot  
support (for example,  
1080p), you may not see a  
picture on your TV.  
in the product. All settings will revert to the factory settings.  
|
54  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Symptom  
Check/Remedy  
No HDMI output.  
• Check the connection between the TV and the HDMI jack of the product.  
• Check if your TV supports 480p/720p/1080i/1080p HDMI input resolution.  
Abnormal HDMI output  
• If random noise appears on the screen, it means that TV does not support HDCP  
screen.  
(High-bandwidth Digital Content Protection).  
AllShare function  
I can see folders shared  
through AllShare, but I  
cannot see the files.  
• AllShare only shows Video, Photo, and Music files. Other types of files are not  
displayed.  
Video is played  
• Check if the network is stable.  
intermittently.  
• Check if the network cable is properly connected and if the network is not  
overloaded.  
• The wireless connection between the DLNA compatible device and the product is  
unstable.  
Check the connection.  
The AllShare connection  
between the product and  
PC is unstable.  
IP address under the same subnetwork should be unique, otherwise IP collision can  
results in such a phenomenon.  
Check if you have a firewall enabled.  
If so, disable the firewall function.  
BD-LIVE  
I cannot connect to the  
Test whether the network connection is active by using the Network Status  
function.  
BD-LIVE server.  
• Check whether a USB memory device is connected to the product.  
• The memory device must have at least 1GB of free space to accommodate the  
BD-LIVE service.  
You can check the available size in BD Data Management. (See page 50)  
• See if the BD-LIVE Internet Connection option is set to Allow(All).  
• If all above fails, contact the contents provider or update to the latest firmware.  
When using the BD-LIVE  
service, an error occurs.  
The USB memory device must have at least 1GB of free space to accommodate  
the BD-LIVE service.  
You can check the available size in BD Data Management. (See page 50)  
| NOTES |  
When the factory default settings are restored, all stored user BD data is deleted.  
\
Repairs  
If you contact us to repair your product, an administration fee may be charged if either:  
1.  
An engineer is called out to your home at your request and there is no defect in the product.  
You bring the unit to a repair center and there is no defect in the product.  
2.  
We will provide you with the amount of the administration fee before we make a home visit or begin any work on your  
product.  
com, or contact Samsung Customer Care at 1-800-SAMSUNG (726-7864) before seeking to repair your product.  
|
English  
55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix  
Specifications  
Power Requirements  
AC 110-120V, ~50/60Hz  
Power Consumption  
Weight  
72.5 W  
5.07 Ibs  
General  
Dimensions  
16.93 (W) x 2.17 (H) x 9.92 (D) inches  
Operating Temperature Range  
Operating Humidity Range  
Signal/noise ratio  
+41°F to +95°F  
10 % to 75 %  
55 dB  
FM Tuner Usable sensitivity  
12 dB  
Total harmonic distortion  
0.5 %  
Video  
1080p, 1080i, 720p, 480p  
HDMI  
Audio  
PCM multichannel audio, Bitstream audio, PCM audio  
Front speaker output  
Center speaker output  
Surround speaker output  
Subwoofer speaker output  
165W x 2 (3—)  
170W (3—)  
165W x 2 (3—)  
170W (3—)  
Amplifier  
Analog input : 20Hz~20kHz ( 3dB)  
Digital input : 20Hz~40kHz ( 4dB)  
70dB  
Frequency response  
S/N Ratio  
Channel separation  
Input sensitivity  
60dB  
(AUX) 500mV  
Speaker (5.1ch speaker system)  
Speaker  
system  
Dimensions  
Output sound Rated Maximum  
Weights  
(Ibs)  
1.59  
1.34  
1.94  
8.09  
Impedance  
3 —  
Frequency range  
pressure level input  
input  
(W x H x D) (inches)  
Front  
Surround  
Center  
3.5 x 8.2 x 2.7  
3.5 x 5.6 x 2.7  
14.2 x 2.9x 2.7  
6.6 x 13.8 x 11.2  
165W  
330W  
140Hz~ 20kHz  
40Hz ~ 160Hz  
87dB/W/M  
170W  
340W  
Subwoofer  
88dB/W/M  
• Samsung Electronics Co., Ltd reserves the right to change the specifications without notice.  
• Weight and dimensions are approximate.  
• Design and specifications are subject to change without prior notice.  
• Dispose of unwanted electronics through an approved recycler.  
K
SWA-6000  
Operating Humidity Range 10% ~ 75%  
Power Requirements  
AC 120V ~60Hz  
50 W  
Output  
165W x 2 CH  
20Hz~20KHz  
65dB  
Power Consumption  
Weight  
Frequency range  
S/N Ratio  
2.52 lbs  
Dimensions (W x H x D)  
3 x 9 x 6 inches  
Operating Temperature  
+41°F to +95°F  
Range  
|
56  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LIMITED WARRANTY TO ORIGINAL PURCHASER  
This SAMSUNG brand product, as supplied and distributed by SAMSUNG and delivered new, in the original carton to the original  
consumer purchaser, is warranted by SAMSUNG against manufacturing defects in materials and workmanship for a limited  
warranty period of:  
One (1) Year Parts and Labor*  
(*90 Days Parts and Labor for Commercial Use)  
This limited warranty begins on the original date of purchase, and is valid only on products purchased and used in the United  
States. To receive warranty service, the purchaser must contact SAMSUNG for problem determination and service procedures.  
Warranty service can only be performed by a SAMSUNG authorized service center. The original dated bill of sale must be  
presented upon request as proof of purchase to SAMSUNG or SAMSUNG's authorized service center. Transportation of the  
product to and from the service center is the responsibility of the purchaser.  
SAMSUNG will repair or replace this product, at our option and at no charge as stipulated herein, with new or reconditioned parts  
or products if found to be defective during the limited warranty period specified above. All replaced parts and products become  
the property of SAMSUNG and must be returned to SAMSUNG. Replacement parts and products assume the remaining original  
warranty, or ninety (90) days, whichever is longer.  
SAMSUNGs obligations with respect to software products distributed by SAMSUNG under the SAMSUNG brand name are set  
forth in the applicable end user license agreement. Non-SAMSUNG hardware and software products, if provided, are on an “AS  
IS” basis.  
Non-SAMSUNG manufacturers, suppliers, publishers, and service providers may provide their own warranties.  
This limited warranty covers manufacturing defects in materials and workmanship encountered in normal, and except to the  
extent otherwise expressly provided for in this statement, noncommercial use of this product, and shall not apply to the following,  
including, but not limited to: damage which occurs in shipment; delivery and installation; applications and uses for which this  
product was not intended; altered product or serial numbers; cosmetic damage or exterior finish; accidents, abuse, neglect,  
fire, water, lightning or other acts of nature; use of products, equipment, systems, utilities, services, parts, supplies, accessories,  
applications, installations, repairs, external wiring or connectors not supplied and authorized by SAMSUNG, or which damage this  
product or result in service problems; incorrect electrical line voltage, fluctuations and surges; customer adjustments and failure  
to follow operating instructions, cleaning, maintenance and environmental instructions that are covered and prescribed in the  
instruction book; product removal or reinstallation; reception problems and distortion related to noise, echo, interference or other  
signal transmission and delivery problems. SAMSUNG does not warrant uninterrupted or error-free operation of the product.  
THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED AND DESCRIBED ABOVE, AND NO WARRANTIES  
WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY  
OR FITNESS FOR A PARTICULAR PURPOSE, SHALL APPLY AFTER THE EXPRESS WARRANTY PERIODS STATED  
ABOVE, AND NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR CORPORATION WITH  
RESPECT TO THIS PRODUCT SHALL BE BINDING ON SAMSUNG. SAMSUNG SHALL NOT BE LIABLE FOR LOSS OF  
REVENUE OR PROFITS, FAILURE TO REALIZE SAVINGS OR OTHER BENEFITS, OR ANY OTHER SPECIAL, INCIDENTAL OR  
CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT, REGARDLESS OF  
THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF SAMSUNG HAS BEEN ADVISED OF THE POSSIBILITY  
OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST SAMSUNG BE GREATER IN AMOUNT THAN THE  
PURCHASE PRICE OF THE PRODUCT SOLD BY SAMSUNG AND CAUSING THE ALLEGED DAMAGE. WITHOUT LIMITING  
THE FOREGOING, PURCHASER ASSUMES ALL RISK AND LIABILITY FOR LOSS, DAMAGE OR INJURY TO PURCHASER AND  
PURCHASER’S PROPERTY AND TO OTHERS AND THEIR PROPERTY ARISING OUT OF THE USE, MISUSE OR INABILITY  
TO USE THIS PRODUCT SOLD BY SAMSUNG NOT CAUSED DIRECTLY BY THE NEGLIGENCE OF SAMSUNG. THIS  
LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT, IS  
NONTRANSFERABLE AND STATES YOUR EXCLUSIVE REMEDY.  
Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or  
consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights,  
and you may also have other rights which vary from state to state.  
To obtain warranty service, please contact SAMSUNG customer care center.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
QUESTIONS OR COMMENTS?  
COUNTRY  
CALL  
OR VISIT US ONLINE AT  
WRITE  
Samsung Electronics America, Inc.  
85 Challenger Road Ridgefield Park,  
NJ 07660-2112  
1-800-SAMSUNG  
IN THE US  
(726-7864)  
AH68-02575A-01  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Q See Home Security System QC40196 835 User Guide
Quasar Answering Machine PAX210 User Guide
Radica Games Games 74051 User Guide
Radio Shack Cordless Telephone 43 3820 User Guide
Remington Pole Saw 110946 01A User Guide
Samsung TV DVD Combo L100W User Guide
Sanus Systems TV Mount VLT14 User Guide
Sanyo Freezer MDF 137 User Guide
Saturn Automobile 2007 Vue Hybrid User Guide
Scion Automobile 00505 12wMG XB User Guide