Samsung Home Theater System HT C6930W User Guide

HT-C6930W  
7.1CH Blu-ray  
Home Theater System  
user manual  
imagine the possibilities  
Thank you for purchasing this Samsung product.  
To receive more complete service,  
please register your product at  
Download from Www.Somanuals.com. All Manuals Search And Download.  
This product satisfies FCC regulations when shielded cables and connectors are used to connect the  
unit to other equipment. To prevent electromagnetic interference with electric appliances, such as  
radios and televisions, use shielded cables and connectors for connections.  
FCC NOTE (for U.S.A)  
This equipment has been tested and found to comply with the limits for a Class B digital device,  
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection  
against harmful interference in a residential installation.  
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used  
in accordance with the instructions, may cause harmful interference to radio communications.  
However, there is no guarantee that interference will not occur in a particular installation.  
If this equipment does cause harmful interference to radio or television reception, which can be  
determined by turning the equipment off and on, the user is encouraged to try to correct the  
interference by one or more of the following measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from that to which the receiver is  
connected.  
Consult the dealer or an experienced radio/TV technician for help.  
CAUTION : FCC regulations state that any unauthorized changes or modifications to this equip-  
ment may void the user’s authority to operate it.  
RF Radiation Exposure Statement  
This equipment complies with FCC RF Radiation Exposure limits set forth for an uncontrolled  
environment.  
This equipment should be installed and operated with a minimum distance of 20cm between the  
radiator and your body.  
This transmitter must not be co-located or operating in conjunction with any other antenna or  
transmitter.  
This device complies with part 15 of the FCC Rules. Operation is subject to the following two  
conditions:  
(1) This device may not cause harmful interference, and  
(2) this device must accept any interference received, including interference that may cause  
undesired operation.  
Changes or modifications not expressly approved by the party responsible for compliance  
could void the user's authority to operate the equipment.  
To comply with the FCC RF exposure compliance requirements, this device and its antenna  
must not be co-located or operated in conjunction  
The final device into which this transmitter module is installed must be labeled with the following  
statement:  
"This device contains TX FCC ID: A3LDNUBS1." If this transmitter will be configured as a pc  
peripheral, it will be the OEM's responsibility to obtain authorization as such (either through  
Certification of Declaration of Conformity) prior to marketing of the device.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
3
Important Safety Instructions  
Read these operating instructions carefully before using the unit. Follow all the safety instructions listed  
below. Keep these operating instructions handy for future reference.  
1) Read these instructions.  
2) Keep these Instructions.  
3) Heed all warnings.  
4) Follow all instructions.  
5) Do not use this apparatus near water.  
6) Clean only with dry cloth.  
7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.  
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus  
(including amplifiers) that produce heat.  
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two  
blades with one wider than the other. A grounding type plug has two blades and a third grounding  
prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit  
into your outlet, consult an electrician for replacement of the obsolete outlet.  
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles,  
and the point where they exit from the apparatus.  
11) Only use attachment/accessories specified by the manufacturer.  
12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or  
sold with the apparatus. When a cart is used, use caution when moving the cart/  
apparatus combination to avoid injury from tip-over.  
13) Unplug this apparatus during lightning storms or when unused for long periods of time.  
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been  
damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects  
have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate  
normally, or has been dropped.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
English  
Precautions  
Ensure that the AC power supply in your house complies with the identification sticker located on the back  
of your product.  
Install your product horizontally, on a suitable base (furniture), with enough space around it for ventilation  
(3~4 inches).  
Do not place the product on amplifiers or other equipment which may become hot.  
Make sure the ventilation slots are not covered.  
Do not stack anything on top of the product.  
Before moving the product, ensure the Disc Insert Hole is empty.  
In order to disconnect the product completely from the power supply, remove the main plug from the wall  
outlet, especially when left unused for a long period of time.  
During thunderstorms, disconnect the AC main plug from the wall outlet. Voltage peaks due to lightning  
could damage the product.  
Do not expose the product to direct sunlight or other heat sources. This could lead to overheating and  
malfunction of the product.  
Protect the product from moisture, and excess heat or equipment creating strong magnetic or electric  
fields (i.e. speakers.).  
Disconnect the power cable from the AC supply if the product malfunctions.  
Your product is not intended for industrial use. Use of this product is for personal use only.  
Condensation may occur if your product or disc has been stored in cold temperatures. If transporting the  
product during the winter, wait approximately 2 hours until the product has reached room temperature  
before using.  
The batteries used with this product contain chemicals that are harmful to the environment.  
Do not dispose of batteries in the general household trash.  
Viewing TV using the 3D function  
IMPORTANT HEALTH AND SAFETY INFORMATION FOR 3D PICTURES. Read and  
understand the following safety information before using the TV’s 3D function.  
WARNING  
Some viewers may experience discomfort while viewing 3D TV such as dizziness, nausea and headaches. If you  
experience any such symptom, stop viewing 3D TV, remove 3D Active Glasses and rest.  
Watching 3D images for an extended period of time may cause eye strain. If you feel eye strain, stop viewing 3D  
TV, remove your 3D Active Glasses and rest.  
A responsible adult should frequently check on children who are using the 3D function. If there are any reports of  
tired eyes, headaches, dizziness, or nausea, have the child stop viewing 3D TV and rest.  
Do not use the 3D Active Glasses for other purposes (such as general eyeglasses, sunglasses, protective  
goggles, etc.)  
Do not use the 3D function or 3D Active Glasses while walking or moving around. Using the 3D function or 3D  
Active Glasses while moving around may result in injuries due to running into objects, tripping, and/or falling.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
5
Safety Information  
Cautions on Handling and Storing Discs  
License  
Small scratches on the disc may reduce sound  
and picture quality or cause skipping.  
Be especially careful not to scratch discs when  
handling them.  
“This item incorporates copy protection technology that is protected  
by U.S. patents and other intellectual property rights of Rovi  
Corporation. Reverse engineering and disassembly are prohibited.”  
ABOUT DIVX VIDEO: DivX® is a digital video format  
created by DivX,Inc. This is an official DivX Certified  
Holding discs  
more information and software tools to convert your  
files into DivX video.  
Do not touch the playback side of the disc.  
Hold the disc by the edges so that  
fingerprints will not get on the surface.  
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must  
be registered in order to play DivX Video-on-Demand (VOD) content.  
To generate the registration code, locate the DivX VOD section in the  
device setup menu. Go to vod.divx.com with this code to complete  
the registration process and learn more about DivX VOD.  
DivX Certified to play DivX video up to HD 1080p, including premium  
Do not stick paper or tape on the disc.  
Disc Storage  
content.  
iPod is a trademark of Apple Inc.,  
registered in the U.S. and other  
countries.  
Do not keep in direct sunlight  
Keep in a cool ventilated area  
Keep in a clean Protection jacket.  
Store vertically.  
iPhone is a trademark of Apple Inc.  
Manufactured under license from Dolby Laboratories. Dolby,  
Pro Logic and the double-D symbol are trademarks of Dolby  
Laboratories.  
Manufactured under license under U.S. Patent #’s: 5,451,942;  
5,956,674;5,974,380; 5,978,762; 6,226,616; 6,487,535;  
7,212,872; 7,333,929; 7,392,195; 7,272,567 & other U.S.  
and worldwide patents issued & pending.  
DTS and the Symbol are registered trademarks, & DTS-HD,  
DTS-HD Master Audio | Essential, and the DTS logos are  
trademarks of DTS, Inc. Product includes software. © DTS,  
Inc. All Rights Reserved.  
< Open Source License Notice >  
In the case of using open source software, Open Source  
Licenses are available on the product menu.  
"Blu-ray 3D" and "Blu-ray 3D"logo are trademarks of Blu-ray  
Disc Association.  
NOTE  
Do not allow the discs to become contaminated with  
dirt.  
Do not load cracked or scratched discs.  
Handling and Storing Discs  
If you get fingerprints or dirt on the disc, clean it with a  
mild detergent diluted in water and wipe with a soft cloth.  
When cleaning, wipe gently from the inside to  
the outside of the disc  
NOTE  
Condensation may form if warm air comes into  
contact with cold parts inside the product. When  
condensation forms inside the product, it may not  
operate correctly. If this occurs, remove the disc  
and let the product stand for 1 or 2 hours with the  
power on.  
Copyright  
© 2010 Samsung Electronics Co., Ltd. All rights  
reserved.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6
English  
Contents  
2
4
5
6
6
6
Safety Warnings  
SAFETY INFORMATION  
Important Safety Instructions  
Precautions  
Cautions on Handling and Storing Discs  
License  
Copyright  
2
GETTING STARTED  
9
9
Key features of your new Blu-ray Home Theater  
10 Icons that will be used in manual  
11 Disc Types and Characteristics  
15 Accessories  
16 Description  
16  
17  
Front Panel  
Rear Panel  
18 Remote control  
20 Connecting the Speakers  
CONNECTIONS  
25 Connecting External Devices/your TV via HDMI  
26 Connecting the FM Antenna  
27 Connecting the Video Out to your TV  
28  
Connecting Audio from External Components  
20  
29 Connecting to the Network  
31 Before Starting (Initial settings)  
32 Setting the Menu  
33 Display  
SETUP  
33  
34  
34  
34  
36  
36  
36  
36  
36  
3D  
TV Aspect Ratio  
BD Wise (Samsung Products only)  
Resolution  
31  
HDMI Format  
Movie Frame (24Fs)  
Progressive Mode  
Still Mode  
HDMI Deep Color  
37 Audio  
37  
38  
38  
38  
39  
40  
40  
Speaker Setting  
Musical Room Calibration  
EQ Optimizer  
HDMI Audio  
Digital Output  
Dynamic Range Control  
AV Sync  
40 System  
40  
40  
40  
40  
41  
41  
41  
Initial Settings  
Internet@TV Screen Size  
Anynet+ (HDMI-CEC)  
BD Data Management  
Clock  
DivX(R) Registration  
DivX(R) Deactivation  
42 Network  
42  
45  
45  
Network Settings  
Network Status  
BD-Live Internet Connection  
45 Language  
46 Security  
46  
46  
Parental Rating  
Change Password  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
7
Contents  
46 General  
SETUP  
46  
46  
46  
46  
Background  
Front Display  
Power On/Off Sound  
Light Effect  
46  
47 Support  
47  
47  
Software Upgrade  
Contact Samsung  
48 Playing a Disc  
BASIC FUNCTIONS  
48 Using the Disc menu / Title menu / Popup menu  
49 Using the Search and Skip Functions  
50 Slow Motion Play/Step Motion Play  
50 Repeat Playback  
48  
51 Using the TOOLS button  
53 Listening to Music  
55 Sound Mode  
56 Playing back a Picture  
57 Playing Back a USB Storage Device  
57 Listening to Radio  
58 Using an iPod  
60 Using Internet@TV  
64 BD-LIVE™  
NETWORK SERVICES  
64 Software Upgrade Notification  
64 Using the AllShare Function  
60  
66 Troubleshooting  
69 Index  
70 Specifications  
OTHER INFORMATION  
66  
Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8
English  
Getting Started  
Key features of your new Blu-ray Home Theater  
Product Features  
Playback of many disc types, plus an FM tuner  
This product allows you to play various discs, including BD-ROM/RE/R, DVD-VIDEO, DVD-RW/-R  
(V mode), DVD+RW/+R, MP3/WMA, JPEG, DivX/MKV/MP4, and CD-R/RW, and has a sophisticated  
FM tuner, all in a single player.  
Full HD audio decoding support (Dolby Digital, Dolby Pro Logic llx, Dolby Pro Logic llz,  
Dolby Digital Plus, Dolby TrueHD, DTS, DTS-HD HRA, DTS-HD MA Essential)  
HDMI  
HDMI transmits Blu-Ray/DVD video and audio signals simultaneously, and provides a clearer picture.  
The 1080p (Full HD) resolution provides even clearer pictures.  
AV SYNC function  
Video may lag behind the audio if the product is connected to a digital TV.  
To compensate for this, you can adjust the audio delay time to sync up with the video.  
Wireless receiver module  
Samsung ’s rear-channel wireless receiver module does away with cables running between the product  
and rear-channel speakers. Instead, the rear speakers connect to a compact wireless receiver module  
that communicates with the product.  
iPod & iPhone support  
You can enjoy music files by connecting your iPod to the product with the supplied iPod dock.  
BD Wise  
BD Wise automatically adjusts BD Wise-compliant Samsung products to their optimal settings.  
This feature is enabled only if BD Wise-compliant Samsung products are connected to each other using  
an HDMI cable.  
Internet@TV  
You can download various fee charged or free of charge applications through the network connection.  
Various internet services and content are provided, including news, weather forecast, stock  
market, games, movies and music.  
3D  
This product can play 3D contents through an HDMI cable.  
To implement the 3D effect, connect a 3D device (3D-compliant AV receiver, 3D-compliant TV) to the  
product using an HDMI cable, and play the 3D content while wearing 3D vision glasses.  
Blu-ray Disc Features  
Blu-ray Discs support the highest quality HD video available in the industry - Large capacity means no  
compromise in video quality. Furthermore, a Blu-ray Disc has the same familiar size and look as a DVD.  
* The following Blu-ray Disc features are disc dependant and will vary. Appearance and navigation of  
features will also vary from disc to disc. Not all discs will have the features described below.  
Video highlights  
The BD-ROM format for movie distribution supports three highly advanced video codecs, including AVC,  
VC-1, and MPEG-2.  
HD video resolutions are also available:  
1920 x 1080 HD  
1280 x 720 HD  
For high-definition playback  
To view high-definition content on a Blu-ray disc, an HDTV (High Definition Television) is required.  
Some discs may require using the product's HDMI OUT to view high-definition content. The ability to view  
high-definition content on Blu-ray disc may be limited depending on the resolution of your TV.  
BD-LIVE  
You can use a Blu-ray Disc supporting BD-LIVE through the network connection to enjoy special content  
provided by the disc manufacturer.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
9
Getting Started  
Icons that will be used in manual  
Make sure to check the following terms before reading the user manual.  
Term  
Logo  
Icon  
Definition  
BD-ROM  
This indicates a function available on a BD-ROM.  
h
This indicates a function available on a BD-RE/-R disc recorded in the  
BD-RE format.  
BD-RE/-R  
z
Z
DVD-VIDEO  
This indicates a function available on a DVD-VIDEO.  
DVD-RW (V)  
DVD-R  
This indicates a function available on recorded DVD+RW or DVD-RW (V)/  
DVD-R/+R discs that have been recorded and finalized.  
DVD+RW  
y
DVD+R  
Audio CD  
This indicates a function available on an audio CD-RW/-R (CD-DA format  
o
w
G
This indicates a function available in a CD-RW/-R, DVD-RW/-R disc or a  
USB storage media containing MP3 or WMA contents.  
MP3  
WMA  
-
-
This indicates a function available in a CD-RW/-R, DVD-RW/-R disc or a  
USB storage media containing JPEG contents.  
JPEG  
DivX  
MKV  
MP4  
This indicates a function available in a CD-RW/-R, DVD-RW/-R disc or a  
USB storage media containing DivX contents.  
x
DivX  
-
USB storage  
device  
This indicates a function available on a USB storage device.  
F
!
This indicates a situation where a function does not operate or settings  
may be cancelled.  
CAUTION  
NOTE  
-
-
-
This indicates tips or instructions on the page that help each function  
operate.  
This indicates a button on the remote that provides direct and easy  
access to a function.  
Shortcut Key  
This product is compatible with the NTSC color system only.  
PAL discs will not play.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10  
English  
Logos of Discs that can be played  
Disc Types and Characteristics  
Blu-ray Disc Compatibility  
Blu-ray is a new and evolving format. Accordingly, disc  
compatibility issues are possible. Not all discs are  
compatible and not every disc will play back. For  
additional information, refer to the Disc Types and  
Characteristics section of this Manual. If you encounter  
compatibility problems, please contact the SAMSUNG  
customer care center at 1-800 SAMSUNG.  
Blu-ray Disc  
3D Blu-ray Disc  
NOTE  
NTSC broadcast system in  
U.S.A, Canada, Korea,  
Japan  
Playback may not work for some types of discs, or  
when specific operations, such as angle change  
and aspect ratio adjustment, are being performed.  
Information about the discs is written in detail on  
the box. Please refer to this if necessary.  
Dolby Digital Plus  
Do not allow the disc to become dirty or scratched.  
Fingerprints, dirt, dust, scratches or deposits of  
cigarette smoke on the recording surface may  
make it impossible to use the disc for playback.  
When a BD-Java title is played, loading may take  
longer than a normal title, or some functions may  
perform slowly.  
DTS-HD High Resolution  
Audio  
Dolby TrueHD  
Discs that cannot be played  
HD DVD Disc  
DVD-RAM  
DTS-HD Master Audio |  
Essential  
3.9 GB DVD-R Disc for Authoring.  
DVD-RW (VR mode)  
Java  
Super Audio CD (except CD layer)  
DVD-ROM/PD/MV-Disc, etc CVD/CD-ROM/  
CDV/CD-G/CD-I/LD  
CDGs play audio only, not graphics.  
NOTE  
BD-LIVE  
Some commercial discs and DVD discs purchased  
outside your region may not be playable with this  
product. When these discs are played, “Cannot read  
this disc. Please check the regional code of the  
disc.” will be displayed.  
If a DVD-R/-RW disc has not been recorded  
properly in DVD video format, it will not be playable.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
11  
Getting Started  
Region code  
Disc Types  
BD-ROM  
Both this product and the discs are coded by  
region. These regional codes must match in  
order to play the disc. If the codes do not match,  
the disc will not play.  
Blu-ray Disc Read Only Memory. A BD-ROM disc  
contains pre-recorded data. Although a BD-ROM  
may contain any form of data, most BD-ROM discs  
will contain movies in High Definition format, for  
playback on the product. This product can play  
back pre-recorded commercial BD-ROM discs.  
Region  
Disc Type  
Blu-ray  
Area  
Code  
North America, Central America,  
South America, Korea, Japan,  
Taiwan, Hong Kong and South  
BD-RE/BD-R  
A
Blu-ray Disc Rewritable/Blu-ray Disc Recordable.  
BD-RE/BD-R is the ideal format for making  
backups, or recording personal video.  
East Asia.  
Europe, Greenland, French  
territories, Middle East, Africa,  
Australia and New Zealand.  
DVD-VIDEO  
B
A digital versatile disc (DVD) can contain up to 135-  
minutes of images, 8 audio languages and 32 subtitle  
languages. It is equipped with MPEG-2 picture  
compression and Dolby Digital surround, allowing you  
to enjoy vivid and clear quality images.  
India, China, Russia, Central and  
South Asia.  
C
1
2
3
The U.S., U.S. territories and  
Canada  
When switching from the first layer to the second  
layer of a dual-layered DVD Video disc, there may  
be momentary distortion in the image and sound.  
This is not a malfunction of the product.  
Once a DVD-RW/-R recorded in Video Mode is  
finalized, it becomes DVD-Video. Pre-recorded  
(pre-stamped) commercial DVDs with movies are  
also referred to as DVD-Videos. This product can  
play back pre-recorded commercial DVD discs  
(DVD-Video discs) with movies.  
Europe, Japan, the Middle East,  
Egypt, South Africa, Greenland  
Taiwan, Korea, the Philippines,  
Indonesia, Hong Kong  
DVD-VIDEO  
Mexico, South America, Central  
America, Australia, New Zealand,  
Pacific Islands, Caribbean  
4
DVD-R/-RW  
Once a DVD-R/-RW recorded in Video Mode is  
finalized, it becomes DVD-Video. Ability to play  
back may depend on recording conditions.  
Russia, Eastern Europe, India,  
most of Africa, North Korea,  
Mongolia  
5
6
This product can play back DVD-R disc recorded  
and finalized with a Samsung DVD video recorder.  
China  
Playback can be perfomed with DVD-RW discs in  
the Video Mode and finalized only.  
DVD+RW  
This product can play back a DVD+RW disc  
recorded with a DVD Video recorder. Ability to  
play back may depend on recording conditions.  
DVD+R  
This product can play back a DVD+R disc recorded  
and finalized with a DVD Video recorder. Ability to  
play back may depend on recording conditions.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
12  
English  
Audio CD  
DivX (Digital Video Express)  
An audio disc on which 44.1kHz PCM Audio is  
recorded.  
DivX is a video file format developed by Microsoft and is  
based on MPEG4 compression technology to provide  
audio and video data over the Internet in real-time.  
MPEG4 is used for video encoding and MP3 for audio  
encoding so that the users can watch a movie at near  
DVD-quality video and audio.  
This product can play back CD-DA format audio  
CD-R and CD-RW discs.  
The product may not be able to play some CD-R or  
CD-RW discs due to the condition of the recording.  
CD-R/-RW  
Supported Formats (DivX)  
This product only supports the following media formats.  
If both video and audio formats are not supported, the  
user may experience problems such as broken images  
or no sound.  
Use a 700MB (80 minute) CD-R/-RW disc.  
If possible, do not use a 800MB (90 minute) or above  
disc, as the disc may not play back.  
If the CD-R/-RW disc was not recorded as a closed  
session, you may experience delays when playing  
back the beginning of the disc or all recorded files  
may not play.  
Some CD-R/-RW discs may not be playable with this  
product, depending on the device which was used to  
burn them. For contents recorded on CD-R/-RW  
media from CDs for your personal use, playability  
may vary depending on contents and discs.  
Supported Video Formats  
Format  
Supported Versions  
AVI  
DivX3.11~DivX5.1, XviD  
Supported Audio Formats  
Sampling  
Frequency  
Format  
Bit Rate  
Disc Format  
MP3  
AC3  
DTS  
80~384kbps  
128~384kbps  
1.5Mbps  
44.1khz  
Using MP3 discs  
44.1/48khz  
44.1khz  
CD-R/-RW, DVD-RW/-R recorded with UDF,  
ISO9660 or JOLIET format can be played back.  
Only MP3 files with the “.mp3” or “.MP3” extension  
DivX files, including audio and video files, created  
in the DTS format can only support up to 6Mbps.  
Aspect Ratio : Although the default DivX resolution  
is 640x480 pixels (4:3), this product supports up  
to 800x600 pixels (16:9). TV screen resolutions  
higher than 800 are not supported.  
When you play a disc whose sampling frequency is  
higher than 48khz or 320kbps, you may experience  
shaking on the screen during playback.  
can be played.  
Playable bit rate range is from 56 Kbps to 320 Kbps.  
Playable sample-rate is 32KHz to 48KHz.  
The product can handle a maximum of 1500 files and  
folders under a parent folder. For MP3 files recorded with  
a VBR (Variable Bit Rates), the sound may cut in and out.  
Using JPEG discs  
CD-R/-RW, DVD-RW/-R recorded with UDF,  
ISO9660 or JOLIET format can be played back.  
Qpel and gmc is not supported.  
Only JPEG files with the ".jpg", ".JPG", ".jpeg" or  
MKV, MP4  
"JPEG" extension can be displayed.  
Progressive JPEG is supported.  
CD-R/-RW, DVD-R/-RW, USB, PC streaming  
Video Files with the following extensions can be  
played. : .avi, .divx, .mkv, .mp4, .AVI, .DIVX,  
.MKV, .MP4  
DVD-RW/-R (V)  
This is a format that is used for recording data on a  
DVD-RW or DVD-R disc. The disc can be played by  
this product once it has been finalized.  
If a disc has has been recorded in Video Mode by a  
different maker’s recorder but has not been finalized,  
it cannot be played by this product.  
NOTE  
Some DivX, MKV and MP4 format discs may  
not play, depending on the video resolution and  
frame rate condition.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
13  
Getting Started  
Supported File Formats  
Video File Support  
File Extension  
Container  
Video Codec  
Divx 3.11/4.x/5.1/6.0  
XviD  
Audio Codec  
Resolution  
1920x1080  
1920x1080  
1920x1080  
1920x1080  
1920x1080  
1920x1080  
1920x1080  
1920x1080  
1920x1080  
1920x1080  
1920x1080  
1920x1080  
1920x1080  
1920x1080  
1920x1080  
MP3  
AC3  
DTS  
WMA  
PCM  
*.avi  
AVI  
MP4v3  
H.264 BP/MP/HP  
VC-1 AP  
MP3  
AC3  
DTS  
DivX 5.1/6.0  
XviD  
*.mkv  
MKV  
H.264 BP/MP/HP  
VC-1 AP  
*.wmv  
*.mp4  
WMA  
AAC  
WMV (wmv9)  
MP4  
VC-1 SM  
MP4 (mp4v)  
H.264 BP/MP/HP  
MPEG1  
MP1, 2  
AC3  
DTS  
*.mpg  
*.mpeg  
PS  
MPEG2  
H.264 BP/MP/HP  
Music File Support  
File Extension  
Container  
Audio Codec  
Support Range  
*.mp3  
MP3  
-
MP3  
Compliant with WMA version 10  
* Sampling rates (in kHz) - 8, 11, 16, 22, 32,  
44.1, 48  
*.wma  
WMA  
WMA  
* Bit rates - All bit-rates in the range 5kbps to  
384kbps  
Download from Www.Somanuals.com. All Manuals Search And Download.  
14  
English  
10) Bigger the image resolution, the longer the  
delay to displaying.  
Notes on USB connection  
11) DRM applied MP3 files downloaded from a  
Supported devices:  
commercial site are not played back.  
USB storage media, MP3 player, digital camera,  
USB card reader  
12) External HDD device is not supported.  
13) Supported file formats  
1) Does not support if a folder or file name is  
longer than 125 characters.  
Format  
Still Picture  
Music  
File name  
File extension  
Bit rate  
Version  
Pixel  
Sampling Frequency  
JPG  
MP3  
2) A subtitle file bigger than 300 KB may not be  
properly displayed.  
JPG .JPEG  
.MP3  
3) A certain USB/digital camera device may not  
be compatible with the product.  
80~384kbps  
640x480  
4) FAT16 and FAT32 file systems are  
supported.  
44.1kHz  
NTFS file system is not supported.  
5) Photo (JPEG), music (MP3) and video file  
should have their names in Korean or English.  
Otherwise, the file may not played.  
6) Connect directly to the product's USB port.  
Connecting through another cable may raise  
problems with USB compatibility.  
7) Inserting more than one memory device to a  
multi-card reader may not operate properly.  
8) PTP protocol for digital camera is not  
supported.  
9) Do not disconnect USB device during a  
"loading" process.  
Accessories  
Check for the supplied accessories below.  
FUNCTION  
POWER  
T
V
S
O
U
R
C
E
B
D
R
E
C
E
I
V
E
R
/
T
V
SLEEP  
1
4
2
5
8
0
3
6
9
7
F
U
L
L
S
C
R
E
E
N
REPEAT  
MUTE  
TUNING  
/CH  
VOL  
DISC MENU  
TOOLS  
SFE MODE  
MENU  
TITLE MENU  
POPUP  
INFO  
RETURN  
A
EXIT  
UER  
M
E
MORY  
MO/ST  
B
C
D
INTERNET  
@
DSP  
Remote Control  
Video Cable  
(AH39-40001V)  
FM Antenna  
(AH42-00017A)  
iPod Dock  
(AH96-00051A)  
User's Manual  
(AH68-02279Y)  
(AH59-02298A)/  
Batteries (AAA size)  
(4301-000116)  
ASC Microphone  
(AH30-00099A)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
15  
Getting Started  
Description  
Front Panel  
1
2
3
4
5
6
7
8
9
10  
11 12  
13  
DISC TRAY  
DISPLAY  
Insert disc here.  
1
2
3
4
Displays the playing status, time, etc.  
Detects signals from the remote control.  
REMOTE CONTROL SENSOR  
OPEN/CLOSE BUTTON  
Opens and closes the disc tray.  
Switches the mode as follows :  
BD/DVD D. IN AUX HDMI. IN1 HDMI. IN2 FM  
Goes back to the previous title/chapter/track.  
Tunes down the FM frequency band.  
FUNCTION BUTTON  
5
6
TUNING DOWN & SKIP BUTTON  
STOP BUTTON  
Stops disc playback.  
7
8
PLAY/PAUSE BUTTON  
Plays a disc or pauses playback.  
Goes to the next title/chapter/track.  
Tunes up the FM frequency band.  
TUNING UP & SKIP BUTTON  
9
Turns the product on and off.  
Volume adjustment.  
10  
11  
12  
POWER BUTTON (  
VOLUME CONTROL  
)
ASC IN JACK  
USB PORT  
Used to connect the ASC Microphone for setting up MRC (Musical Room Calibration).  
A USB storage device can be connected here and used as storage when connected to BD-  
LIVE. It can also be used for software upgrades and MP3/JPEG/DivX/MKV/MP4 playback.  
13  
NOTE  
Software upgrades using the USB Port must be performed with a USB memory flash stick only.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
16  
English  
Rear Panel  
1
2
3
4
5
6
7
8
9
10  
11  
12  
FM ANT  
COMPONENT OUT  
LAN  
DIGITAL  
AUDIO IN  
WIRELESS  
HDMI IN  
HDMI OUT  
iPod  
OPTICAL  
SPEAKER IMPEDANCE  
:
3
VIDEO OUT  
SPEAKER OUTPUT CONNECTORS  
COOLING FAN  
Connect the front, center, surround back, subwoofer speakers.  
1
2
3
4
5
The cooling fan supplies cool air to the product to prevent overheating  
and always revolves when the power is on.  
iPod JACK  
Connect the iPod dock connector here.  
Connect the FM antenna.  
FM 75 COAXIAL JACK  
The TX card enables communication between the product and the  
wireless receiver module.  
TX CARD CONNECTION (WIRELESS)  
EXTERNAL DIGITAL OPTICAL IN JACKS  
(OPTICAL)  
Use this to connect external equipment capable of digital output.  
6
Receives digital video and audio signals simultaneously using an  
HDMI cable.  
HDMI IN JACKS  
7
8
Using an HDMI cable, connect this HDMI output terminal to the  
HDMI input terminal on your TV for the best quality picture.  
HDMI OUT JACK  
Can be used for network based services (see pages 60~65),  
BD-LIVE and software upgrade under the network connection.  
LAN TERMINAL  
9
Connect to the 2CH analog output of an external device  
(such as a VCR)  
AUX IN JACKS  
10  
11  
12  
COMPONENT VIDEO OUT JACKS  
VIDEO OUT JACK  
Connect a TV with Component video inputs to these jacks.  
Connect your TV's Video Input jack (VIDEO IN) to the VIDEO OUT  
Jack on this product.  
! CAUTION  
Provide a minimum of 4 inches of clearance on all sides of the the home theater to ensure adequate  
ventilation.  
Do not obstruct the cooling fan or ventilation holes.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
17  
Getting Started  
Remote control  
Tour of the Remote Control  
FUNCTION  
Use to select the mode.  
POWER  
TV SOURCE  
or  
Press to select TV's video mode.  
Turn the product on and off.  
Set a Sleep time to shut off the  
procuct.  
BD RECEIVER/TV  
SLEEP  
If you want to change to Home Theater  
or TV mode on the remote control,  
check this button's LED color.  
- Home Theater : Orange  
To open and close the disc tray.  
1
4
2
5
8
0
3
6
- TV: Green  
Press numeric buttons to operate options.  
7
9
FULL SCREEN  
REPEAT  
Allows you to repeat a title, chapter,  
track or disc.  
Press this to see the full screen on a TV.  
Press to skip backwards or forwards.  
Press to search backwards or  
forwards.  
Press to pause a disc.  
Press to stop/play a disc.  
Cut off the sound temporarily.  
MUTE  
Adjust the volume.  
TUNING  
/CH  
Search for active FM stations and  
change channels.  
VOL  
DISC MENU  
TOOLS  
SFE MODE  
MENU  
Press this to move to the home  
menu.  
You can set the SFE (Sound Field Effect) mode best  
suited for the type of music you are listening to.  
TITLE MENU  
POPUP  
Press to view the disc menu.  
Use this to enter the popup  
menu/title menu.  
INFO  
Use this to display the playback  
information when playing  
a Blu-ray/DVD disc.  
Press this to use the Tools menu.  
Select on-screen menu items and  
change menu value.  
Press this to exit the menu.  
RETURN  
A
EXIT  
Return to the previous menu.  
Used to set a preset radio  
frequency.  
TUNER  
MEMORY  
MO/ST  
These buttons are used both for menus  
on the product and also several  
Blu-ray Disc functions.  
B
C
D
Select MONO or STEREO for radio  
broadcasting.  
@
INTERNET  
DSP  
Press this to link to various  
Internet@TV services.  
Regulate and stabilize the volume  
level. (Digital Signal Processor)  
Select the desired Dolby Pro  
Logic II audio mode.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
18  
English  
Installing batteries in the Remote Control TV Brand Code List  
* Battery size: AAA  
Brand  
Code  
56, 57, 58  
01, 15  
01, 02, 03, 04, 05,  
06, 07, 08, 09, 10,  
11, 12, 13, 14  
Brand  
Code  
Admiral  
Mitsubishi/  
18, 40, 59, 60, 75  
(M.Wards)  
MGA  
A Mark  
Anam  
AOC  
MTC  
NEC  
18  
18, 19, 20, 40, 59, 60  
Nikei  
03  
03  
03  
Onking  
Onwa  
01, 18, 40, 48  
Bell &  
Howell  
06, 07, 08, 09, 54,  
66, 67, 73, 74  
Panasonic  
Penney  
Philco  
57, 58, 81  
(M.Wards)  
18  
Brocsonic  
Candle  
59, 60  
18  
03  
03, 18, 25  
97  
03  
18  
NOTE  
03, 15, 17, 18, 48,  
54, 59, 62, 69, 90  
Make sure to match the “+” and “–” ends of  
Cetronic  
Citizen  
15, 17, 18, 40,  
48, 54, 62, 72  
63, 66, 80, 91  
15, 18, 59  
40  
06, 66, 67  
17, 48, 56, 60,  
61, 75  
Philips  
the batteries with the diagram inside the  
compartment.  
Pioneer  
Portland  
Proton  
Cinema  
Classic  
Concerto  
Contec  
Coronado  
Craig  
Assuming typical TV usage, the batteries last  
for about one year.  
The remote control can be used up to  
approximately 23 feet (7 meters) in a straight line.  
Quasar  
46  
15  
Radio  
Shack  
03, 05, 61, 82, 83, 84  
RCA/  
Proscan  
18, 59, 67, 76, 77,  
78, 92, 93, 94  
Croslex  
Crown  
62  
03  
Setting the Remote Control  
Realistic  
Sampo  
03, 19  
40  
Curtis  
Mates  
59, 61, 63  
03  
02, 03, 04, 15, 16,  
17, 18, 19, 20, 21,  
22, 23, 24, 25, 26,  
27, 28, 29, 30, 32,  
34, 35, 36, 48, 59, 90  
You can control certain functions of your TV with  
this remote control.  
00, 15, 16, 17, 40,  
43, 46, 47, 48, 49,  
59, 60, 98  
CXC  
Samsung  
Sanyo  
Scott  
Sears  
Sharp  
19, 61, 65  
03, 40, 60, 61  
15, 18, 19  
Daewoo  
When operating a TV with the remote control  
Daytron  
Dynasty  
40  
03  
1. Press the BD RECEIVER/TV button to set the  
15, 57, 64  
remote control to TV mode.  
Signature  
2000  
03, 15, 40, 46, 59, 61,  
57, 58  
Emerson  
64, 82, 83, 84, 85  
(M.Wards)  
2. Turn on the TV.  
Fisher  
Funai  
19, 65  
03  
03  
Sony  
Soundesign  
Spectricon  
SSS  
50, 51, 52, 53, 55  
3. While holding down the POWER button, enter  
03, 40  
01  
18  
the code corresponding to your brand of TV.  
Futuretech  
General  
06, 40, 56, 59,  
66, 67, 68  
40  
15, 18, 50, 59, 69  
45  
56, 59, 67, 86  
70  
59, 61, 87, 88  
03, 15, 40  
15  
If there is more than one code listed for  
your TV in the table, enter one at a time to  
determine which code works.  
Electric (GE)  
18, 40, 48, 54,  
59, 60, 62  
Hall Mark  
Hitachi  
Inkel  
Sylvania  
Symphonic  
Tatung  
Techwood  
Teknika  
TMK  
61, 95, 96  
06  
18  
03, 15, 18, 25  
18, 40  
19, 57, 63, 71  
18  
Example : For a Samsung TV  
JC Penny  
JVC  
While holding down the POWER button, use the  
number buttons to enter 00, 15, 16, 17, or 40.  
KTV  
4. If the TV turns off, the setting is complete.  
KEC  
Toshiba  
Vidtech  
Videch  
You can use the TV POWER, VOLUME,  
CHANNEL, and Numeric buttons (0~9).  
KMC  
LG  
01, 15, 16, 17, 37, 38,  
59, 60, 69  
(Goldstar)  
39, 40, 41, 42, 43, 44  
15, 17, 18, 40,  
48, 54, 60, 64  
Luxman  
18  
Wards  
NOTE  
LXI  
(Sears)  
19, 54, 56, 59,  
The remote control may not work on some  
Yamaha  
York  
18  
40  
03  
58, 79  
01  
03, 54  
60, 62, 63, 65, 71  
brands of TV's. Also, some operations may not  
be possible, depending on your brand of TV.  
The remote control will work with Samsung TVs  
by default.  
15, 17, 18, 48, 54,  
Magnavox  
59, 60, 62, 72, 89  
Yupiteru  
Zenith  
Marantz  
Matsui  
MGA  
40, 54  
54  
18, 40  
Zonda  
Dongyang  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
19  
Connections  
This section involves various methods of connecting the product to other external components.  
Before moving or installing the product, be sure to turn off the power and disconnect the power cord.  
Connecting the Speakers  
6.6~9.8 feet (2~3m)  
BD  
6.6~9.8 feet (2~3m)  
BD  
Installing the DPL IIx  
Position of the product  
Installing the DPL IIz  
Place it on a stand or cabinet shelf, or under the TV stand.  
Selecting the Listening Position  
The listening position should be located about 2.5 to 3 times the distance of the TV's screen size away from the TV.  
Example : For 32" TV's 6.56 ~ 7.87 feet (2~2.4m)  
For 55" TV's 11.5 ~ 13.1 feet (3.5~4m)  
Place these speakers in front of your listening position, facing inwards (about 45°)  
toward you. Place the speakers so that their tweeters will be at the same height as your  
Front Speakers ei  
ear. Align the front face of the front speakers with the front face of the center speaker or  
place them slightly in front of the center speakers.  
It is best to install it at the same height as the front speakers. You can also install it  
Center Speaker  
f
directly over or under the TV.  
Place these speakers to the sides of your listening position. If there isn't enough  
room, place these speakers so they face each other. Place them about 2 to 3 feet  
(60 to 90cm) above your ear, facing slightly downward.  
Surround Speakershj  
Unlike the front and center speakers, the surround speakers are used to handle  
*
mainly sound effects and sound will not come from them all the time.  
If you are using two back surround speakers, place them behind the listening position  
and about 2.3-3.3 feet (70 cm to 1 m) above your ears.  
SBL SBR  
Surround Back Speakers  
Subwoofer  
The position of the subwoofer is not so critical. Place it anywhere you like.  
g
Setting the rear surround speakers above the front left and right speakers FHL FHR  
1. Mount the rear surround left/right speakers on the wall above the front left/right speakers.  
2. It is recommended that the rear surround speakers be mounted at least 3.3 (1 m) feet above the front left/right  
speakers to achieve the height effect.  
NOTE  
When installing speakers on a wall, make sure the speakers are firmly fixed.  
If you change the speaker positions, run the speaker calibration again.  
When installing surround back speakers or front top channel speakers, some of the speaker cables may be exposed.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
20  
English  
Speaker Components  
Assembled Speakers  
(L) (R)  
SCREW (5x15): 2EA  
SCREW (4x20): 8EA  
CENTER SPEAKER  
STAND  
FRONT  
CENTER  
STAND BASE  
FRONT SPEAKER  
(L) (R)  
(L) (R)  
SUBWOOFER  
SUBWOOFER  
SURROUND  
SURROUND BACK  
SURROUND  
SPEAKER  
SURROUND BACK  
SPEAKER  
SPEAKER CABLE  
SWA-5000  
TX Card  
Wireless Receiver Module  
Speaker Cable (2EA)  
NOTE  
Refer to page 22 to install the Speakers on the Tallboy Stand.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
21  
Connections  
Installing the Speakers on the Tallboy Stand  
1. Turn the Stand Base upside-down and connect it to the Stand.  
1
2
3
4
5
Stand  
Base  
Stand  
2. Insert small screws (4x20, For connecting Stand & Stand Base) clockwise  
into the four holes marked using a screwdriver as shown in the illustration.  
! CAUTION  
When you use a torque screwdriver, be careful not to put  
excessive force. Otherwise, it runs idle or can be damaged.  
(torque screwdriver- below 15 kg.f.cm)  
3. Connect the upper Speaker to the assembled Stand.  
Speaker  
Stand  
4. Insert another large screw (5x15, For connecting Speaker &  
Stand) clockwise into the hole on the rear of the speaker using a  
screwdriver.  
5. This is the appearance after the speaker is installed.  
Follow this steps to install other speaker.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
22  
English  
Connecting The Speakers  
1. Press down the terminal tab on the back of the speaker.  
2. Insert the black wire into the black terminal (–) and the red wire into  
the red (+) terminal, and then release the tab.  
3. Connect the connecting plugs to the back of the product by  
matching the colors of the speaker plugs to the speaker jacks.  
4. With the product turned off, insert the TX card into the TX Card  
Black  
Red  
Connection (WIRELESS) on the back of the product.  
Hold the TX card so that the label "WIRELESS" faces upward and  
insert the card into the port.  
The TX card enables communication between the product  
and the wireless receiver module.  
5. Connect the left and right surround speakers to the wireless  
iPod  
receiver module.  
6. Plug the power cord of the wireless receiver module into the  
wall outlet.  
TX card  
7. Turn on the product. The product and wireless receiver  
module will now communicate with each other and you will  
hear sound from the Surround speakers.  
Front Speaker (R)  
Front Speaker (L)  
Center Speaker  
Surround Back Speaker (R)  
Surround Back Speaker (L)  
SPEAKER IMPEDANCE  
:
3
Surround Speaker (L)  
Surround Speaker (R)  
FM ANT  
Subwoofer  
WIRE  
iPod  
SPEAKER IMPEDANCE  
:
3
Wireless Receiver Module  
This product should be connected to the SWA-5000 only.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
23  
Connections  
! CAUTION  
Do not let children play with or near the speakers. They could get hurt if a speaker falls.  
When connecting the speaker wires to the speakers, make sure that the polarity (+/–) is correct.  
Keep the subwoofer speaker out of reach of children to prevent children from inserting their hands  
or alien substances into the duct (hole) of the subwoofer speaker.  
Do not hang the subwoofer on the wall through the duct (hole).  
Do not insert any other card except the TX card specifically for this product.  
If you use a different TX card, the product may be damaged or you may not be able to remove  
the card easily.  
Do not insert the TX card upside down or in the reverse direction.  
Insert the TX card when the product is turned off. Inserting the card when it is turned on may  
cause a problem.  
The wireless receiving antenna is built into the wireless receiver module. Keep it away from water  
and moisture.  
For optimal listening performance, make sure that the area around the wireless receiver module  
location is clear of any obstructions.  
If you hear no sound from the wireless surround speakers, switch the mode to DVD 5.1 channel  
or Dolby Pro Logic II.  
In 2-CH mode, you will hear no sound from the wireless surround speakers.  
NOTE  
If you place a speaker near your TV set, screen color may be distorted because of the magnetic  
field generated by the speaker. If this occurs, place the speaker away from your TV set.  
Place the wireless receiver module at the rear of the listening position. If the wireless receiver  
module is too close to the product, it may cause some sound interruption due to interference.  
If you use a device such as a microwave oven, wireless LAN Card or any other device that uses  
the same frequency (2.4/5.8GHz) near the product, it may cause some sound interruption due to  
interference.  
The transmission distance from the product to the wireless receiver module is about 33 feet  
(10m), but may vary depending on your operating environment. If a steel-concrete wall or metallic  
wall is between the product and the wireless receiver module, the system may not operate at all,  
because the radio wave cannot penetrate metal.  
If the product doesn't make wireless connection, the system needs ID Setting between the  
product and wireless receiver module. With the product turned off, press "0""1""3""5" on  
the remote control, and then turn on the product. With the wireless receiver module turned on,  
press the "ID SET" button on the back of the wireless receiver module for 5 seconds.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
24  
English  
Connecting External Devices/your TV via HDMI  
HDMI is the standard digital interface for connecting to devices such as a TV, projector, DVD player, Blu-ray  
player, set top box, and more.  
Because HDMI is all digital, you'll enjoy digital quality video and sound as it was originally created, without  
the distortions that can be caused when digital content is converted to analog.  
DVD or Blu-ray Player  
SAT (Satellite/Set top box)  
HDMI IN  
FM ANT  
COMPONENT OUT  
LAN  
DIGITAL  
AUDIO IN  
WIRELESS  
HDMI IN  
HDMI OUT  
iPod  
SPEAKER IMPEDANCE  
:
3
VIDEO OUT  
HDMI OUT  
HDMI OUT : Connecting to a TV with an HDMI Cable (BEST QUALITY)  
Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the  
HDMI IN jack on your TV.  
NOTE  
Certain HDMI output resolutions may not work, depending on your TV.  
If an HDMI cable is connected or removed during playback of a CD-DA, MP3 or JPEG file, the product will  
stop playing.  
After making the video connection, set the Video input source on your TV to match the corresponding Video  
output (HDMI, Component or Composite) on your product.  
See your TV owner's manual for more information on how to select the TV's Video Input source.  
If you have set the product's remote control to operate your TV, press the TV SOURCE button on the remote  
control and select HDMI as the external source of the TV.  
You must have an HDMI connection to enjoy videos with 3D technology.  
A long HDMI cable may cause a screen noise. If this is the case, set Deep Color to Off in the menu.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
25  
Connections  
Connecting External Devices/your TV via HDMI  
HDMI IN : Connecting to an External Component with an HDMI Cable  
1. Connect an HDMI cable (not supplied) from the HDMI IN jack on the back of the product to the HDMI OUT jack  
on your digital device.  
2. Press the FUNCTION button to select HDMI. IN1 or HDMI. IN2 input.  
The mode switches as follows : BD/DVD D. IN AUX HDMI. IN1 HDMI. IN2 FM  
HDMI Auto Detection Function  
If you have connected your home theater by HDMI cable, the home theater's video output  
automatically switches to the HDMI mode when you turn it on. For available HDMI video resolutions,  
see page 35.  
This function is not available if the HDMI cable does not support CEC.  
HDMI connection description  
- HDMI outputs only a pure digital signal to the TV.  
- If your TV does not support HDCP, random noise appears on the screen.  
What is the HDCP?  
HDCP (High-band width Digital Content Protection) is a system for preventing BD/DVD content outputted via  
HDMI from being copied. It provides a secure digital link between a video source (PC, DVD. etc) and a display  
device (TV, projector. etc). Content is encrypted at the source device to prevent unauthorized copies from being  
made.  
! CAUTION  
The Anynet+ function is supported only when an HDMI Cable is connected to the HDMI OUT of the  
product.  
Connecting the FM Antenna  
1. Connect the FM antenna supplied to the  
FM Antenna (supplied)  
FM 75Ω COAXIAL jack.  
2. Slowly move the antenna wire around until  
you find a location where reception is good,  
then fasten it to a wall or other rigid surface.  
FM ANT  
WIRE
NOTE  
iPod  
This product does not receive AM  
broadcasts.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
26  
English  
Connecting the Video Out to your TV  
Red Blue  
Green  
METHOD 1  
METHOD 2  
OMPONENOUT  
LAN  
Yellow  
VIDEO OUT  
METHOD 1 : Component Video (BETTER QUALITY)  
If your television is equipped with Component Video inputs, connect a Component video cable (not  
supplied) from the Component Video Output (Pr, Pb and Y) jacks on the back of the product to the  
Component Video Input Jacks on your TV.  
NOTE  
You can select from a variety of resolution settings such as 1080i, 720p, 480p and 480i, depending on the disc type. (See page 35)  
The actual resolution may differ from the setting in the Setup menu if both Component and HDMI cables are connected.  
The resolution may also be different depending on the disc. (See page 35)  
After making the video connection, set the Video input source on your TV to match the corresponding Video output (HDMI,  
Component or Composite) on your product.  
See your TV owner's manual for more information on how to select the TV's Video Input source.  
If you have set the product's remote control to operate your TV, press the TV SOURCE button on the remote control and select  
COMPONENT as the external source of the TV.  
In DVD playback, if both HDMI and Component jacks are connected and you select the Component 1080p, 1080i, 720p or 480p  
mode, the Display Setup menu will show the output resolution as 1080p, 1080i, 720p or 480p in the menu.  
The resolution is actually 480i.  
METHOD 2 : Composite Video (GOOD QUALITY)  
Connect the supplied Video cable from the VIDEO OUT jack on the back of the product to the VIDEO  
IN jack on your TV.  
NOTE  
The VIDEO source is always output in 480i resolution regardless of the resolution set in the Setup menu. (See page 35)  
After making the video connection, set the Video input source on your TV to match the corresponding Video output (HDMI,  
Component or Composite) on your product.  
See your TV owner's manual for more information on how to select the TV's Video Input source.  
If you have set the product's remote control to operate your TV, press the TV SOURCE button on the remote control and  
select VIDEO as the external source of the TV.  
! CAUTION  
Do not connect the unit through a VCR. Video signals fed through VCRs may be affected by copyright protection  
systems and the picture will be distorted on the television.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
27  
Connections  
Connecting Audio from External Components  
COMPONENT OUT  
LAN  
DIGITAL  
AUDIO IN  
HDMI IN  
HDMI OUT  
OPTICAL  
VIDEO OUT  
Red  
White  
Optical Cable  
(not supplied)  
Audio Cable  
(not supplied)  
If the external analog  
component has only one  
Audio Out, connect either  
left or right.  
Set-Top Box  
OPTICAL  
VCR  
AUX  
OPTICAL : Connecting an External Digital Component  
Digital signal components such as a Cable Box/Satellite receiver (Set-Top Box).  
1. Connect the Digital Input (OPTICAL) on the product to the Digital Output of the external digital  
component.  
2. Press the FUNCTION button to select D.IN input.  
The mode switches as follows : BD/DVD D. IN AUX HDMI. IN1 HDMI. IN2 FM  
NOTE  
To see video from your Cable Box/Satellite receiver, you must connect it's video output directly to a TV.  
This system supports Digital sampling frequencies of 32 kHz of higher from external digital components.  
This system supports only DTS and Dolby Digital audio, MPEG audio (bit stream) is not supported.  
AUX : Connecting an External Analog Component  
Analog signal components such as a VCR.  
1. Connect AUX IN (Audio) on the product to the Audio Out of the external analog component.  
Be sure to match connector colors.  
2. Press the FUNCTION button to select AUX input.  
The mode switches as follows : BD/DVD D. IN AUX HDMI. IN1 HDMI. IN2 FM  
NOTE  
You connect the Video Output jack of your VCR to the TV, and connect the Audio Output jacks of the  
VCR to this product.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
28  
English  
Connecting to the Network  
This product enables you to view network based services (See pages 60~65) such as Internet@TV and  
BD-LIVE, as well as receive software upgrades when a network connection is made. We recommend  
using an AP (Access Point) or IP router for the connection.  
For more information on router connection, refer to the user manual of the router or contact the router  
manufacturer for technical assistance.  
Cable Network  
1. Using the Direct LAN Cable (UTP cable), connect the LAN terminal of the product to the LAN  
terminal of your modem.  
2. Set the network options. (See page 42)  
COMPONENT OUT  
LAN  
HDMI IN  
HDMI OUT  
VIDEO OUT  
Router  
Broadband modem  
(with integrated router)  
Or  
Broadband modem  
Broadband  
service  
Broadband  
service  
Networking with PC for  
AllShare function  
(See pages 64~65)  
NOTE  
Internet access to Samsung’s software update server may not be allowed, depending on the router you use or the  
ISP’s policy. For more information, contact your ISP (Internet Service Provider).  
For DSL users, please use a router to make a network connection.  
For the AllShare function, a PC must be connected in the network as shown in the figure.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
29  
Connections  
Connecting to the Network  
Wireless Network  
You can connect to your network with a Wireless IP sharer. A wireless AP/IP router is required to make  
a wireless network connection. To set the network configuration options. see page 42.  
Broadband  
service  
Wireless IP sharer  
PC  
Networking with PC for  
AllShare function  
(See pages 64~65)  
NOTE  
To use a wireless network, your product must be connected to a wireless IP sharer. If the wireless IP sharer  
supports DHCP, your product can use a DHCP (dynamic) or static IP address to connect to the wireless network.  
This product supports IEEE 802.11B, G, and N. We recommend using IEEE 802.11N. When you play video  
over a IEEE 802.11B or G connection, the video may not play smoothly.  
Select a channel for the wireless IP sharer that is not currently being used. If the channel set for the wireless IP  
sharer is currently being used by another device nearby, this will result in interference and communication failure.  
If you select the Pure High-throughput (Greenfield) 802.11n mode and set your AP's Security Encryption type  
to WEP, TKIP or TKIPAES (WPS2Mixed), your Samsung home theater will not support the connection in  
compliance with new Wi-Fi certification specifications.  
If your AP supports WPS (Wi-Fi Protected Setup), you can connect to the network via PBC (Push Button  
Configuration) or PIN (Personal Identification Number). WPS will automatically configure the SSID and WPA  
key in either mode.  
Connection Methods : You can setup the wireless network connection 3 ways:  
- PBC(WPS)  
- Auto Setup (Using the Auto Network Search function)  
- Manual Setup  
Wireless LAN, by its nature, may cause interference, depending on the operating conditions.  
(AP performance, distance, obstacles, interference by other radio devices, etc).  
Set the wireless IP sharer to Infrastructure mode. Ad-hoc mode is not supported.  
When applying the security key for the AP (wireless IP sharer), only the following security protocols are  
supported:  
1) Authentication Mode : WEP, WPAPSK, WPA2PSK  
2) Encryption Type : WEP, AES  
To use the AllShare function, you must connect your PC to your network as shown in the figure.  
The connection can be wired or wireless.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
30  
English  
Setup  
7. Press the ◄► buttons to select the desired  
Network Settings : Wired, Wireless or  
Before Starting (Initial Settings)  
1. Turn on your TV after connecting the product.  
(When the product is connected to TV for the first  
time, the product will turn on automatically and  
display the Initial Settings screen.)  
PBC(WPS), and then press the ENTER button.  
If you do not know your Network Settings,  
press the BLUE (D) button on your remote  
instead to skip Network Settings here, finish the  
Initial Settings, and go to the Home menu. If  
you selected a Network Setting, go to pages  
42~45 for more information about the Network  
settings. When done, go to Step 8.  
Initial Settings I On-Screen Language  
Select a language for the on-screen displays.  
English  
Français  
Deutsch  
Español  
Italiano  
Initial Settings I Network  
Network Setting is needed to use various Internet services.  
Choose the primary method for connecting to network.  
Nederlands  
>Move  
s
Select  
Wired : Set the network connection using the Ethernet cable.  
Please make sure that the Ethernet cable is connected.  
Wireless  
PBC(WPS)  
Wired  
2. Press the ▲▼ buttons to select the desired  
language, then press the ENTER button.  
a
Previous  
d
Skip  
<
Move  
"
Select  
3. Press the ENTER button to Start.  
Initial Settings  
8. Press the OK button.  
TV Aspect, Musical Room Calibration and Network will be set.  
Each setting may be changed later under "Settings"  
The home menu appears. (For more information  
about home menu, please see page 32)  
Home Menu  
Start  
TV service  
to enjoy a variety of Internet Services.  
Please activate Intern  
e
t
@
a
Previous  
"
Select  
4. Press the ▲▼ buttons to select the desired TV  
aspect ratio, then press the ENTER button.  
(See page 34)  
The Musical Room Calibration screen appears.  
No Disc  
a Change Device  
d View Devices  
Enter  
"
5. Plug the ASC microphone into the ASC IN jack  
on the product. (See page 38)  
6. Press the ENTER button to Start.  
NOTE  
When the product is connected to TV for the  
first time, the product will turn on automatically.  
This is not a malfunction.  
The home menu will not appear if you do not  
configure the initial settings, with the exception  
below.  
If you press the BLUE (D) button during the  
Musical Room Calibration or Network setup,  
you can access the home menu even if the  
network setup is not completed yet.  
When you return to the home menu, the full  
screen mode is cancelled automatically.  
Initial Settings I Musical Room Calibration  
Preparing...  
d Skip  
Setting the Musical Room Calibration function  
takes about 3 minutes.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
31  
Setup  
If you want to display the Initial Settings screen  
1. Press the POWER button.  
again to make changes, press the STOP ()  
button on the front panel of the product for  
more than 5 seconds with no disc inserted.  
Use the HDMI cable to connect the product to  
an Anynet+ (HDMI-CEC)-compliant Samsung TV.  
If the TV uses a language supported by the  
product, that language will be set to a  
preferred language automatically.  
The Home Menu appears.  
Home Menu  
TV service  
Please activate Intern  
e
t
@
to enjoy a variety of Internet Services.  
2
3
4
For this to work, the Anynet+ (HDMI-CEC)  
feature must be set to On in both TV and the  
product.  
If the product is left in the stop mode for more  
than 5 minutes without being operated, a  
screen saver will appear on your TV. If the  
product is left in the screen saver mode for  
more than 25 minutes, the power will  
automatically turn off except during playback  
of a CD-DA (Automatic Power-Off Function).  
1
5
6
No Disc  
a Change Device  
d View Devices  
Enter  
"
Selects the Internet@TV.  
Selects the Videos.  
1
2
3
4
5
6
Selects the Music.  
Selects the Photos.  
Selects the Settings.  
Displays buttons available.  
Setting the Menu  
DISC MENU  
TITLE MENU  
POPUP  
1
2
2. Press the ◄► buttons to select Settings,  
TOOLS  
INFO  
then press the ENTER button.  
3. Press the ▲▼ buttons to select the desired  
submenu, then press the ENTER button.  
4. Press the ▲▼ buttons to select the desired  
item, then press the ENTER button.  
3
4
5. Press the EXIT button to exit the menu.  
TUNER  
NOTE  
1
MENU Button : Press this to move to the home menu.  
When the product is connected to the network,  
select Internet@TV from the home menu.  
Download desired content from Samsung AppS.  
The access steps may differ depending on the  
selected menu.  
The OSD (On Screen Display) may change in  
this product after you upgrade the software  
version.  
2
3
4
RETURN Button : Return to the previous menu.  
ENTER / DIRECTION Button:  
Press the arrow buttons to move the cursor and select  
an item.  
Press the ENTER button to launch the selected item or  
confirm the setting.  
EXIT Button : Press this to exit the menu.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
32  
English  
TV Screen Size  
Display  
Lets you enter the actual screen size of your  
TV so that the product can adjust the image  
according to the screen size and display an  
optimal 3D image. (The maximum allowed  
screen size is 116 inches for this product.)  
You can configure various display options such  
as the TV Aspect, Resolution, 3D, etc.  
3D  
Select whether to play a Blu-ray Disc with 3D  
contents in 3D Mode.  
! CAUTION  
If you want to enjoy a 3D content, connect a  
3D device (3D compliant AV receiver or TV)  
to the product and wear a 3D glass before  
playing the 3D content.  
Settings  
Display  
Audio  
3D  
3D  
Syste
Netw
3D Mode  
TV Screen Size :  
: Auto  
55 inch  
While watching the 3D video, all analog  
component and composite signals will be  
blocked automatically.  
Lang
Secu
Gene
Support  
>Move sEnter rReturn  
Still Mode : Auto  
All 3D signals are output only using the  
HDMI cable and through the HDMI OUT  
port.  
3D Mode  
As the video resolution in 3D play mode is  
fixed according to the resolution of the  
original 3D video, you can not change the  
resolution to your preference.  
Auto : The 3D Blu-ray Disc is played in 3D  
mode if your product detects a TV which  
supports it. It is played in 2D mode if your  
product detects a TV which cannot support it.  
Some functions such as BD Wise, or setting  
the screen size or resolution may not  
operate properly in 3D play mode.  
3D : The 3D Blu-ray Disc is played in 3D mode  
at all times. If a TV cannot support 3D Blu-ray  
discs, the TV's screen can be black.  
2D : The 3D Blu-ray Disc is played in 2D mode  
at all times. Choose this to view a picture  
without 3D effect or when a TV cannot support  
3D Blu-ray discs.  
You must use a high-speed HDMI cable for  
a proper output of the 3D signal.  
Stay at least three times of the length of the  
screen distant from the TV.  
- It is recommended to place the 3D video  
screen forward at eye level.  
NOTE  
If the product is connected to some 3D  
devices, the 3D effect may not function  
properly.  
If you press the STOP() button once during  
the 3D disc playback, 3D mode option will be  
deactivated.  
To activate 3D mode option during the 3D disc  
playback, press the STOP() button twice.  
You can not use this product for switching a  
2D content to 3D.  
Depending on the content and its play position,  
vertical black bars could be seen on left or right  
or both sides.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
33  
Setup  
TV Aspect Ratio  
BD Wise (Samsung Products only)  
Depending on the type of television you have, you  
may want to adjust the screen aspect ratio.  
BD Wise is Samsung's latest inter-connectivity feature.  
When you connect Samsung products with  
BD-Wise to each other via HDMI, the optimum  
resolution is set automatically.  
16:9 Normal  
Certain movies (4:3 source)  
are displayed in 4:3 Pillarbox  
(black bars on sides of  
picture) if 16:9 normal is  
selected.  
Off : The output resolution is fixed according to  
the resolution previously set, regardless of the  
resolution of the disc.  
On : The original resolution of the BD/DVD disc  
is output to the TV.  
16:9 Wide  
NOTE  
You can view the full 16:9  
picture on your widescreen  
TV.  
If you want to change the resolution in BD  
Wise, you must set BD Wise to Off in advance.  
If you set BD Wise to off, the resolution of the  
connected TV will be adjusted to its maximum  
resolution automatically.  
4:3 Letter Box  
If the product is connected to a device that  
does not support BD Wise, you can not use  
the BD Wise function.  
Select when you want to  
see the full 16:9 ratio screen  
supplied by a Blu-ray Disc/  
DVD, even though you have  
a TV with a 4:3 ratio screen.  
Black bars will appear at  
the top and bottom of the  
screen.  
For a proper operation of BD Wise, set the BD Wise  
menu of both the product and the TV to On.  
Resolution  
Sets the output resolution of the Component and  
HDMI video signal.  
4:3 Pan-Scan  
The number in 1080p, 1080i, 720p, 480p, or  
480i indicates the number of lines of video.  
The i and p indicate interlaced and progressive  
scan, respectively.  
Select when you want to see  
the 16:9 video supplied by the  
Blu-ray Disc/DVD without the  
black bars on top and bottom,  
even though you have a TV  
with a 4:3 ratio screen. The  
extreme left and right portion  
of the movie picture will be cut  
off.  
Auto : Automatically checks and sets the optimal  
resolution. (HDMI only)  
BD Wise : Automatically sets the optimal  
resolution when connected via HDMI to a TV with  
the BD Wise feature. (The BD Wise menu item  
appears only if BD Wise is set to On.) HDMI only.  
NOTE  
1080p : Outputs 1080 lines of progressive video. (HDMI only)  
1080i : Outputs 1080 lines of interlaced video.  
720p : Outputs 720 lines of progressive video.  
480p : Outputs 480 lines of progressive video.  
480i : Outputs 480 lines of interlaced video.  
(Component & VIDEO only)  
Depending on the disc type, some aspect ratios  
may not be available.  
If you select an aspect ratio and option which is  
different than the aspect ratio of your TV screen,  
the picture might appear distorted.  
If you select the 4:3 Pan-Scan or 4:3 Letter Box,  
you can't see full screen by pressing the FULL  
SCREEN button on the remote control.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
34  
English  
Resolution according to the output mode  
Blu-ray Disc playback  
HDMI / connected  
HDMI / not connected  
Output  
Setup  
HDMI Mode  
Component/VIDEO Mode  
Component Mode  
VIDEO Mode  
Auto  
Optimal Resolution  
1080p@60F  
480i  
480i  
-
-
-
-
1080p, Movie Frame (24Fs) off  
1080p/1080i,  
Movie Frame (24Fs) on  
1080p@24F  
480i  
-
-
1080i, Movie Frame (24Fs) off  
1080i  
720p  
480p  
-
480i  
480i  
480i  
-
1080i  
720p  
480p  
480i  
480i  
480i  
480i  
480i  
720p  
480p  
480i  
DVD playback  
HDMI / connected  
HDMI / not connected  
Output  
Setup  
HDMI Mode  
Optimal Resolution  
1080p@60F  
1080i  
Component/VIDEO Mode  
Component Mode  
VIDEO Mode  
Auto  
1080p  
1080i  
720p  
480p  
480i  
480i  
480i  
480i  
480i  
480i  
-
-
-
-
-
480p  
480p  
480p  
480i  
480i  
480i  
480i  
480i  
720p  
480p  
-
NOTE  
When the factory default settings are restored,  
all user BD data is deleted.  
The Blu-ray Disc must have the 24 frame  
feature in order to use the Movie Frame (24Fs)  
mode.  
If both HDMI and Component jacks are  
connected and you are currently viewing  
component output, there may be a difference  
between the resolution listed in the table and  
actual resolution depending on your TV.  
If the HDMI Auto Detection feature does not  
work, you can't select the 1080p resolution or  
Movie Frame (24Fs).  
If the connected TV does not support Movie  
Frame or the selected resolution, the message  
“If no pictures are shown after the selection,  
please wait for 15 seconds. And then, the  
resolution will be reverted to the previous value  
automatically. Would you like to make a  
selection?” will be displayed.  
If you select Yes and the resolution is not  
supported, the TV's screen will be blank.  
Please wait. After 15 seconds, the resolution  
reverts to the previous value automatically.  
If the screen is blank, press and hold the  
STOP () button on the front of the product  
for more than 5 seconds (no disc inserted).  
All settings are restored to the factory default.  
Follow the steps on the previous page to  
access each mode and select the Display  
Setup that your TV will support.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
35  
Setup  
HDMI Format  
Progressive Mode  
You can optimize the color setting from the HDMI  
output by selecting a connected device Type:  
Set to improve picture quality when you view DVDs.  
Auto : Select to have the product automatically  
set the best picture for the DVD you're  
watching.  
TV : Select if connected to a TV via HDMI.  
Monitor : Select if connected to a Monitor via  
HDMI.  
Video : Select for the best picture from  
Concert or TV show DVDs.  
NOTE  
A TV or monitor has to be connected to the  
product before you select this option.  
Still Mode  
Set the type of picture the home theater shows  
when you pause DVD playback.  
Movie Frame (24Fs)  
Auto: Automatically show the best still picture  
depending on the content.  
Frame : Select when pausing a scene with a  
little action.  
Setting the Movie Frame (24Fs) feature to On  
allows you to adjust the product's HDMI output to  
24 frames per second for improved picture quality.  
You can enjoy the Movie Frame (24Fs) feature only  
on a TV supporting this frame rate. This menu can  
only be selected in 1080i or 1080p HDMI output  
resolution modes.  
Field : Select when pausing a scene with a lot  
of action.  
Off : Movie Frame (24Fs) function is off.  
HDMI Deep Color  
On : Movie Frame (24Fs) function is on.  
Set to output the picture from the HDMI OUT jack  
with Deep Color or without. Deep Color allows more  
accurate color reproduction with deeper color depth.  
NOTE  
Two types of frame rates may be included,  
Auto: The picture is output with Deep Color to  
the connected TV which supports HDMI Deep  
Color.  
depending on the disc: Movie material (24  
frame) and Video material (30 frame). When the  
setting switches between Movie (24 frame) and  
Video (30 frame), the screen may blink for a  
few seconds.  
Off : The picture is output without Deep Color.  
If your TV does not support Movie Frame  
(24Fs) function, a pop-up message is  
displayed.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
36  
English  
Distance  
Audio  
If the speakers cannot be placed at equal  
distances from the listening position, you can  
adjust the delay time of the audio signals from the  
front, center, surround, surround back and  
subwoofer speakers.  
Speaker Setting  
DPL llz  
Off : Select when you place the Surround Back  
speakers as shown.  
On: Provide a more realistic 3D surround  
sound with vertical surround system.  
You can set the Speaker Distance between  
1ft (0.3m) and 30ft (9.0m).  
Settings  
Distance  
Front L  
:
:
:
:
:
:
:
:
:
10ft (3.0m) |  
10ft (3.0m)  
10ft (3.0m)  
10ft (3.0m)  
10ft (3.0m)  
10ft (3.0m)  
10ft (3.0m)  
10ft (3.0m)  
Off  
Display  
Audio  
Settings  
Speaker Setting  
Front R  
Center  
Display  
Audio  
DPL IIz  
:
Off  
Off  
|
Surround L  
Surround R  
Surround Back L  
Surround Back R  
Subwoofer  
Test Tone  
System  
Networ
Langua
Security  
General  
Support  
Level  
System  
Networ
Langua
Security  
General  
Support  
Distance  
Test tone  
:
<Change rReturn  
<Change rReturn  
Test Tone  
Use the Test Tone feature to check the speaker  
connections.  
NOTE  
When selecting DPLII Mode, you can listen  
to 7.1 channel sound from 2CH, 5.1CH  
audio. With 7.1 channel audio, you can  
listen to 7.1 channel sound as it is.  
Press the or button to select All.  
A test tone will be sent to Front L Center ꢀ  
Front R Surround R Surround Back R ꢀ  
Surround Back L Surround L Subwoofer  
in order so you can make sure the speakers are  
set up correctly.  
Level  
You can adjust the balance and level for each  
speaker.  
To stop the test tone, press the or button to  
select Off.  
Adjusting Front/Center/Surround  
/Surround Back/Subwoofer Speaker Level  
• The volume level can be adjusted in steps from  
+6dB to -6dB.  
• The sound gets louder as you move closer to  
+6dB and quieter as you get closer to -6dB.  
Settings  
Speaker Setting  
DPL IIz  
:
Off  
Display  
Audio  
Level  
System  
Networ
Langua
Security  
General  
Support  
Distance  
Test Tone  
:
All  
|
Settings  
Level  
Front L  
:
:
:
:
:
:
:
:
:
0 dB |  
0 dB  
0 dB  
0 dB  
0 dB  
0 dB  
0 dB  
0 dB  
Off  
Display  
Audio  
Front R  
<Change rReturn  
Center  
System  
Networ
Langua
Security  
General  
Support  
Surround L  
Surround R  
Surround Back L  
Surround Back R  
Subwoofer  
Test Tone  
NOTE  
<Change rReturn  
When HDMI Audio is ON, audio is produced  
through the TV speakers. The Test Tone  
function is not available.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
37  
Setup  
NOTE  
Musical Room Calibration  
Setting the Musical Room Calibration  
By setting the Musical Room Calibration (MRC)  
function just once when you relocate or install the  
product, you can have the product automatically  
recognize the distance between speakers, levels  
between channels, and frequency characteristics  
to create a 7.1-channel sound field optimized for  
your environment.  
function takes about 3 minutes.  
You can only use the Musical Room Calibration  
setup if there is no disc in the player.  
If the ASC microphone is disconnected during the  
Musical Room Calibration setup, the setup will be  
canceled.  
When the Musical Room Calibration function is  
activated, the DSP, Dolby Pro Logic ll and SFE  
Mode will not work.  
If the product is connected to external devices or  
other components (such as an iPod, AUX, D.IN),  
the Musical Room Calibration Setup may not work  
properly.  
Noise may result in wrong measurement. So  
please proceed with the measurement in a quiet  
room to obtain proper calibration.  
ASC  
microphone  
EQ Optimizer  
Set optimal EQ automatically depending on the  
region.  
Off : Turn EQ Optimizer off.  
On : Turn EQ Optimizer on.  
Musical Room Calibration  
HDMI Audio  
Turns the Musical Room Calibration mode  
on and off.  
The audio signals transmitted over the HDMI  
Cable can be toggled On and Off.  
Off: You hear the speakers set to the User  
Speaker Setting values.  
Off : Video is transmitted over the HDMI  
connection cable only, and audio is output  
through your product speakers only.  
On: You hear the speakers set to the Musical  
Room Calibration mode values.  
On : Both video and audio signals are  
transmitted over the HDMI connection cable,  
and audio is output through your TV speakers  
only.  
Musical Room Calibration Setting  
1. Plug the ASC microphone into the ASC IN jack.  
2. Place the ASC microphone at the listening position.  
NOTE  
Musical Room Calibration runs automatically  
HDMI Audio is automatically down-mixed to  
2ch for TV speakers.  
in the following sequence:  
Front left  
Center  
Surround Back left  
Surround Back right Surround left  
Subwoofer  
Front right  
Surround right  
Press the RETURN button to cancel the  
Musical Room Calibration Setting.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
38  
English  
NOTE  
Digital Output  
Be sure to select the correct Digital Output  
or you will hear no sound or a loud noise.  
If the HDMI device (Receiver, TV) is not compatible  
with a compressed format (Dolby digital, DTS), the  
audio signal outputs as PCM.  
Regular DVDs do not have Secondary and Effect  
audio.  
Some Blu-ray Discs do not have Secondary and  
Effect audio.  
This Digital Output setup does not affect the  
analog (L/R) audio or HDMI audio output to your  
TV.  
It affects the optical and HDMI audio output when  
the home theater is connected to a receiver.  
Lets you set the audio output format according  
to the capabilities of your amplifier. (For more  
details, please refer to the digital output  
selection).  
PCM  
Bistream (Re-encode)  
Bistream (Audiophile)  
Blu-ray Discs may include three audio streams.  
- Primary Audio : The audio soundtrack of the  
main feature.  
-
Secondary Audio : Additional soundtrack  
such as director or actor's commentary.  
- Interactive Audio : Plays Interactive sounds  
when selected. Interactive Audio is different on  
each Blu-ray Disc.  
If you play MPEG audio soundtracks, audio signal  
outputs PCM regardless of Digital Output  
Selections (PCM or Bitstream).  
Digital Output Selection  
Bitstream  
Bitstream  
Setup  
PCM  
HDMI Receiver  
(Re-encode)  
(Audiophile)  
Connection  
Optical  
PCM 2ch  
PCM 2ch  
HDMI Receiver or Optical HDMI Receiver  
Optical  
PCM 2ch  
PCM  
Up to 7.1ch  
Up to 5.1ch  
DTS re-encoded  
DTS re-encoded  
PCM  
Dolby Digital  
Dolby Digital  
Dolby Digital  
Dolby Digital  
Plus  
Up to 7.1ch  
PCM 2ch  
DTS re-encoded  
Dolby Digital Plus  
Dolby Digital  
Audio Stream  
on Blu-ray Disc Dolby TrueHD  
Up to 7.1ch  
Up to 6.1ch  
Up to 7.1ch  
Up to 7.1ch  
PCM 2ch  
PCM 2ch  
PCM 2ch  
PCM 2ch  
PCM 2ch  
PCM 2ch  
PCM 2ch  
PCM 2ch  
DTS re-encoded  
DTS re-encoded  
DTS re-encoded  
DTS re-encoded  
PCM 2ch  
Dolby TrueHD  
DTS  
Dolby Digital  
DTS  
DTS  
DTS-HD HRA  
DTS-HD MA  
PCM  
DTS-HD HRA  
DTS-HD MA  
PCM 2ch  
Dolby Digital  
DTS  
DTS  
DTS  
PCM 2ch  
Dolby Digital  
DTS  
Audio Stream  
Dolby Digital  
on DVD  
Up to 5.1ch  
Up to 6.1ch  
Dolby Digital  
DTS  
DTS  
Outputs only the Primary audio  
soundtrack (main soundtrack of the  
movie) so that your receiver can decode  
the audio bitstream. You will not hear  
Secondary and Effect audio.  
Decodes Primary, Secondary and  
Effect audio streams together into  
PCM audio, then re-encodes the  
PCM audio into DTS bitstream.  
Decodes Primary, Secondary and  
Effect audio streams together into  
PCM audio.  
Definition for  
Any  
Blu-ray Disc  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
39  
Setup  
You can then operate this product using a  
Samsung TV remote control and start disc  
playback simply by pressing the PLAY () button  
on the TV’s remote control.  
Dynamic Range Control  
You can listen at low volumes but still hear dialog  
clearly. This is only active when a Dolby Digital  
signal is detected.  
For more information, please see the TV user  
manual.  
Off : Turn Dynamic Range Control off.  
Off : Anynet+ function is off.  
On : Anynet+ function is on.  
On : Choose to listen to a movie at a lower  
volume without losing clarity of dialog.  
Auto : The Dynamic Range Control is set  
automatically based on the information  
provided by the Dolby TrueHD Soundtrack.  
NOTE  
This function is not available if the HDMI cable  
does not support CEC.  
If your Samsung TV has an  
n
logo, then  
AV Sync  
it supports the Anynet+ function.  
Depending on your TV, certain HDMI output  
resolutions may not work.  
Video may not sync with the audio when the  
product is connected to a digital TV. If this occurs,  
adjust the audio delay time to match the video.  
Please refer to the user manual of your TV.  
The Anynet+ function is supported only when  
an HDMI Cable is connected to the HDMI OUT  
of the product.  
You can set the audio delay time between  
0 msec and 300 msec. Adjust it to the optimal  
setting.  
If the HDMI cable or the power code is  
unplugged, or if the product is turned off  
abnormally due to power failure, first connect  
the HDMI cable again; turn on all devices  
including the product, and use the ANYNET+  
function under the TV menu to activate all  
connected devices again.  
System  
Initial Settings  
By using the Initial Settings, you can set  
language, TV aspect, Musical Room Calibration  
and Network setting, etc.  
BD Data Management  
For more information on the settings, refer to the  
corresponding section in this user manual.  
Lets you manage the downloaded contents from a Blu-ray  
Disc that supports the BD-LIVE service.  
You can check the device information including the  
storage size, delete the BD data or change the Flash  
memory device. Change Device allows you to select either  
the product's Internal Memory or External Memory  
(connected USB Device). If the data to be stored from  
BD-LIVE is greater than the size of the remaining memory  
or the Internal Memory is full, connect an External USB  
device, then select External Device in the menu.  
Internet@TV Screen Size  
Set the Internet@TV Screen to the optimal size.  
Size 1 : Display smaller application icons. You  
may see some black on the sides of the  
screen.  
Size 2 : Display normal application icons.  
Size 3 : Display larger application icons. The  
image may be too large for your TV screen.  
Settings  
Display  
Audio  
BD Data Management  
Internal Memory  
Current Device  
:
Anynet+ (HDMI-CEC)  
System  
Network  
Language  
Security  
General  
Support  
Total Size  
: 589 MB  
: 589 MB  
Available Size  
Anynet+ is a convenient function that offers linked  
operations with other Samsung products that  
have the Anynet+ feature.  
To operate this function, connect this product to  
a Samsung TV with an HDMI cable.  
Delete BD Data  
Change Device  
|
:
Internal Memory  
>Move sSelect rReturn  
Download from Www.Somanuals.com. All Manuals Search And Download.  
40  
English  
Description of Device (Storage) Information  
on the Product  
DivX(R) Registration  
View DivX(R) VOD Registration Code to purchase  
and play DivX(R) VOD content.  
Total Size : Total size of the Device (Storage).  
Available Size : Available size of the Device (Storage).  
NOTE  
Settings  
In the external memory mode, disc playback  
will be stopped if you disconnect the USB  
device in the middle of the playback.  
Only those USB devices formatted in FAT file  
system (DOS 8.3 volume label) are supported.  
We recommend you use USB devices that  
support USB 2.0 protocol with a 4 MB/sec or  
faster read/write speed.  
The Resume Play function may not work after  
you format the storage device.  
The total size of BD Data Management may  
differ, depending on the software version.  
Display  
Audio  
Initial Settings  
Disc Menu  
DivX(R) Video On Demand  
:
System  
Network  
Language  
Security  
General  
Support  
Your registration code is : XXXXXXXXXX  
OK  
NOTE  
This option is not activated if you select OK.  
To activate this option, please activate  
DivX(R) Deactivation.  
Clock  
Set time-related functions.  
DivX(R) Deactivation  
Settings  
Select this to get a new registration code.  
Display  
Audio  
System  
Networ
Clock  
Clock Mode  
Clock Set  
: Auto  
|
Settings  
Time Zone  
: GMT + 0:00  
: Off  
Display  
Audio  
Initial Settings  
Disc Menu  
Langua
DST  
:
Security  
General  
Support  
System  
Network  
Language  
Security  
General  
Support  
Do you want to deactivate your device?  
>Move sSelect rReturn  
Yes  
No  
Clock Mode : You can select Auto or Manual.  
If you select Manual, the Clock Set menu will  
be activated while DST will be deactivated.  
Clock Set : You can specify the current time  
NOTE  
and date manually.  
This function can be operated when DivX(R)  
Registration function is deactivated.  
Time Zone : You can specify the time zone  
that is applicable to your area.  
DST : You can set DST (Daylight Saving Time)  
1 hour, 2 hours and off.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
41  
Setup  
Network  
Network Setting  
Internet Protocol Setup : Auto  
\
To begin setting up the network connection for  
your product, follow these steps:  
IP Address  
Subnet Mask  
Gateway  
:
:
:
0
0
0
0
0
0
0
0
0
0
0
0
1. In the Home menu, press the ◄► buttons to  
select the Settings, and then press the  
ENTER button.  
DNS  
: Auto  
DNS Server  
:
0
0
0
0
>Move  
"
Enter  
'
Return  
2. Press the ▲▼ buttons to select Network,  
and then press the ENTER button.  
3. Press the ▲▼ buttons to select Network  
2. After the Network Function has acquired the  
network values, press the RETURN button.  
Then, run a Network Test to ensure the  
product has connected to your network (See  
page 45).  
3. If the Network Function does not acquire the  
network values or you selected Manual, go to  
the directions for Manual Setup.  
Settings, and then press the ENTER button.  
4. Press the ▲▼ buttons to select Network  
Type, and then press the ENTER button.  
5. Press the ▲▼ buttons to select Wired or  
Wireless, and then press the ENTER button.  
6. Go to the next section.  
Setting Up a Wired Connecton - Manual  
Network Settings  
If the Auto Setting does not work, you’ll need to set  
the Network Setting values manually.  
To get the Network setting values from most  
Windows computers, follow these steps:  
Please contact your ISP to find out if your IP  
address is static or dynamic. If it is dynamic, we  
recommend using the Auto setting. This is the  
easiest and will work in the majority of cases. If it is  
static, you must use the manual set up procedure.  
Directions for wired networks are below. Directions  
for wireless networks are after the directions for  
wired networks.  
1. Right click the Network icon on the bottom  
right of the screen.  
2. In the pop-up menu, click Status.  
3. On the dialog that appears, click the Support  
tab.  
Wired Network  
4. On the Support tab, click the Details button.  
The Network settings are displayed.  
1. In the Network Settings menu, press the  
▲▼ buttons to select Network Setting, and  
then press the ENTER button.  
To enter the Network settings into your product,  
follow these steps:  
The Internet Protocol Setup screen appears.  
1. On the Internet Protocol Setup screen, press  
2. Press the ► button, then select Auto or  
the ENTER button.  
Manual, and then press the ENTER button.  
2. Press the ▲▼ buttons to select Manual,  
and then press the ENTER button.  
Setting Up a Wired Connecton - Auto  
3. Press the ▼ button to go to the first entry  
field (IP Address).  
1. If you selected Auto, the Network Function  
acquires and fills in the values for IP Address,  
Subnet Mask, etc., automatically.  
Network Setting  
Internet Protocol Setup  
IP Address  
: Manual  
\
:
:
:
0
0
0
0
0
0
Subnet Mask  
Gateway  
255 255 255  
NOTE  
0
0
0
This process can take up to five minutes.  
DNS  
: Manual  
DNS Server  
:
0
0
0
0
>Move  
"
Enter  
'
Return  
Download from Www.Somanuals.com. All Manuals Search And Download.  
42  
English  
4. Use the number buttons on your remote to  
4. After the network connection is set up,  
press the RETURN button to exit the  
Network Setting screen.  
enter numbers.  
5. When done with each field, use the ►  
button to move successively to the next  
field.  
Setting Up the Wireless Network  
Connection - Auto Network Search  
You can also use the other arrow buttons to  
move up, down, and back.  
Most wireless networks have an optional security  
system that requires devices that access the  
network to transmit an encrypted security code  
called an Access or Security Key. The Security Key  
is based on a Pass Phrase, typically a word or a  
series of letters and numbers of a specified length  
you were asked to enter when you set up security  
for your wireless network. If you use this method  
of setting up the network connection, and have  
a Security Key for your wireless network, you will  
have to enter the Pass Phrase during the setup  
process.  
6. Enter the IP Address, Subnet Mask, and  
Gateway values.  
7. Press the ▼ button to go to DNS.  
8. Press the ▼ button to go to the first DNS  
entry field.  
9. Press the RETURN button on your remote.  
10. Run a Network Test to ensure the product  
has connected to your network (See page  
45).  
Setting Up the Network Connection  
Wireless Network  
To set up the wireless connection using Auto  
Network Search, follow these steps:  
You can setup the wireless connection three ways:  
1. In the Network Settings menu, press the  
▲▼ buttons to select Network Setting,  
and then press the ENTER button.  
Using PBC(WPS)  
Using the Auto Network Search function.  
Manually.  
The Internet Protocol Setup screen appears.  
Each method is described below.  
2. Press the ▲▼ buttons to select the  
Internet Protocol Setup, and then press  
the ENTER button.  
Setting Up the Wireless Network  
Connection - PBC(WPS)  
3. Press the ▲▼ buttons to select Auto or  
Manual, and then press the ENTER button.  
The easiest way to set up the wireless network  
connection is using the PBC(WPS) function.  
If your wireless router has a PBC(WPS) button,  
follow these steps:  
4. If you selected Auto, press the ▲ button to  
go to Select a network, and then press the  
ENTER button.  
The Network function searches for available  
wireless networks.  
When done, it displays a list of the available  
networks.  
1. In the Network Settings menu, press the  
▲▼ buttons to select Network Setting,  
and then press the ENTER button.  
The Internet Protocol Setup screen appears.  
2. Press the RED (A) button on the remote  
Network Setting  
control.  
Select a network  
: Not Selected  
: Auto  
3. Press the PBC(WPS) button on your router  
within two minutes. Your product displays  
the Network Selection Screen, and  
automatically acquires all the network  
setting values it needs and connects to your  
network. When it is done, it displays an OK  
button. Press the ENTER button on your  
remote.  
Internet Protocol Setup  
\
IP Address  
Subnet Mask  
Gateway  
:
:
:
0
0
0
0
0
0
0
0
0
0
0
0
DNS  
: Auto  
DNS Server  
:
0
0
0
0
a PBC(WPS) >Move  
"
Enter  
'
Return  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
43  
Setup  
5. In the list of networks, press the ▲▼  
buttons to select a network, and then press  
the ENTER button.  
10. When done, press the BLUE (D) button on  
your remote, and then press the ENTER  
button.  
6. If the PIN/Security pop-up appears, go to  
Step 7. If the Network Connecting Screen  
appears, go to Step 11.  
11. Wait until the connection confirmation  
message is displayed, and then press the  
ENTER button. The Network Settings  
screen reappears.  
12. To test the connection, press the ▼ button  
to select Network Test, and then press the  
ENTER button.  
7. Press the ▲▼ buttons to select PIN or  
Security.  
For most home networks, you would select  
Security (for Security Key).  
8. On the Security screen, enter your network’s  
Pass Phrase.  
Setting Up the Wireless Network  
Connection - Manual  
NOTE  
If the Auto Setting does not work, you need to  
enter the Network settng values manually.  
To get the Network setting values from most  
Windows computers, follow these steps:  
You should be able to find the Pass Phrase  
on one of the set up screens you used to set  
up your router or modem.  
Network Setting  
Security Key  
1. Right click the Network icon on the bottom  
right of the screen.  
0 entered  
0~9  
Number  
Lower case  
Delete  
2. In the pop-up menu, click Status.  
A
B
I
C
J
D
K
R
Y
E
L
S
Z
F
M
T
G
N
U
a
b
H
O
V
3. On the dialog that appears, click the  
P
W
Q
X
space  
Support tab.  
4. On the Support tab, click the Details button.  
Move  
"
Enter  
'
Return  
The Network settings are displayed.  
To Enter the Network settings into your product,  
follow these steps:  
9. To enter the Pass Phrase, follow these  
1. On the Internet Protocol Setup screen,  
general directions:  
press the ENTER button.  
Press the number keys on your remote to  
enter numbers.  
2. Press the ▲▼ buttons to select Manual,  
Use the arrow keys on your remote to  
move from button to button on the  
Security Key screen.  
and then press the ENTER button.  
3. Press the ▼ button to go to the first entry  
field (IP Address).  
Pressing the RED (A) button on the  
remote lets you change the text displayed  
on the buttons to lower case, upper case,  
numbers, or icons. To enter a letter or  
symbol, move the cursor to the letter or  
symbol, and then press the ENTER  
button.  
Network Setting  
Select a network  
Internet Protocol Setup  
: Not Selected  
: Manual  
\
IP Address  
Subnet Mask  
Gateway  
:
:
:
0
0
0
0
0
0
255 255 255  
0
0
0
0
DNS  
: Manual  
To delete the last letter or number you  
entered, press the GREEN (B) button.  
DNS Server  
:
0
0
0
a PBC(WPS) >Move  
"
Enter  
'
Return  
4. Use the number buttons to enter numbers.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
44  
English  
5. When done with each field, use the ►  
button to move successively to the next  
field.  
BD-Live Internet Connection  
Select whether to allow an Internet connection  
when BD-LIVE service is used.  
You can also use the other arrow buttons to  
move up, down, and back.  
Allow(All) : The Internet connection will be  
allowed for all BD-LIVE contents.  
6. Enter the IP Address, Subnet Mask, and  
Allow(Valid Only) : The Internet connection will  
be allowed only for BD-LIVE contents  
containing a valid certificate.  
Gateway values.  
7. Press the ▼ to go to DNS.  
8. Press the ▼ button to go to the first DNS  
Prohibit : No Internet connection will be  
allowed for any BD-LIVE content.  
entry field. Enter the numbers as above.  
9. When done, press the ▲ button to return to  
Access Point Selection. Select the network,  
and then press the ENTER button.  
10. Go to Step 6 in the Automatic Wireless  
procedure above, and follow the directions  
from that point on.  
NOTE  
What is a valid certificate?  
When the product uses BD-LIVE to send the  
disc data and request to the server to certify  
the disc, the server uses the transferred data  
to check if the disc is valid and sends the  
certificate back to the product.  
Network Test  
Use this menu to connect to the wired network or  
check whether your network connection is  
working or not.  
The Internet connection may be restricted  
while you are using BD-LIVE contents.  
Language  
Network Status  
You can select the language you prefer for the  
home menu, disc menu, etc.  
Check whether a connection to the network and  
the Internet have been established.  
On-Screen Menu : Select the language for the  
on-screen displays.  
Disc Menu : Select the language for the disc  
menu displays.  
Audio : Select the language for disc audio.  
Subtitle : Select the language for disc subtitles.  
NOTE  
The selected language will only appear if it is  
supported on the disc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
45  
Setup  
Security  
General  
When you operate this menu for the first time, the  
password setup screen appears. Enter the  
desired 4-digit password using the number  
buttons. (Default password is set to 0000.)  
Background  
Change the background theme of the menu screen.  
Parental Rating  
Settings  
The Parental Rating works in conjunction with  
Blu-ray Disc/DVDs that have been assigned a  
rating, which helps you control the types of  
Blu-ray Disc/ DVDs that your family can watch.  
Background  
Skin 1  
Skin 2  
Skin 3  
Skin 4  
Skin 5  
To use this function, select a rating level that  
restricts the player to playing discs with ratings  
appropriate for your family.  
A larger number indicates that the program is  
intended for adult audiences only. When you  
select a rating number, you should select the  
highest rating number you want the player to be  
able to play. For example, if you select Level 6,  
the player will play discs rated 6 and below, and  
will not play discs rated Level 7 or 8.  
lect rReturn  
Front Display  
Change the brightness of the front panel.  
Settings  
Auto : Dim during playback only.  
Dim : Dim the display window.  
Bright : Brighten the display window.  
Display  
Audio  
Parental Rating  
Change Password  
Off  
8(Adults)  
System  
Network  
Language  
Security  
General  
Support  
7
6
5
4
3
2
Power On/Off Sound  
Play a melody when the product is turned on and  
off.  
Off : Turn Power Sound Off.  
Change Password  
Change the 4-digit password used to access  
security functions.  
On : Turn Power Sound On.  
Light Effect  
Settings  
You can activate or deactivate the light effect on the  
top of the product.  
Change Password  
Display  
Audio  
Always On : Activate Light Effect at all times.  
Select this for retail display.  
System  
Networ
Langua
Securit
Genera
Suppor
Enter New Password  
Auto : Activate Light Effect when turning the  
product on and off or when moving the tray.  
Select when installing the product in your home.  
Number rReturn  
Off : Turn Light Effect off at all times.  
If you forgot your password  
1. Remove the disc.  
2. Press and hold the STOP () button on the  
front panel for 5 seconds or more.  
All settings will revert to the factory settings.  
NOTE  
When the factory default settings are restored, all the  
user data stored in the BD data will be deleted.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
46  
English  
You can also update software in two other ways:  
Support  
then download and store the latest software  
(RUF file) onto a USB flash drive. Connect the  
USB flash drive to the USB port of the product  
(disc tray must be empty) to update the  
software, then follow the on-screen  
instructions.  
download and write the latest software (RUF  
file) onto a disc. Insert and play the disc in the  
product to start the update, then follow the  
on-screen instructions.  
Software Upgrade  
This menu allows you to upgrade software for  
performance improvements or additional services.  
You can check the current software version,  
upgrade on the Internet and set the Auto upgrade  
notification. If the product is properly connected to  
the network by cable or wirelessly, the product will  
automatically connect to our website each time it is  
turned on and download update files if any valid  
upgrade exists.  
Settings  
Display  
Audio  
Syste
Software Upgrade  
Software Upgrade  
NOTE  
Software upgrades using the USB Host jack  
must be performed with no disc inside.  
Current Version  
: XXX-XXXXXXXX-XXXX.X  
Netwo
By Internet  
Langu
Auto Upgrade Notification : On  
|
Secur
Gener
Support  
If you want to cancel the upgrade during the  
process of downloading the upgrade data,  
press the ENTER button.  
When the system upgrade is done, check the  
software details in the software Upgrade  
menu.  
Do not turn off the product during the System  
Upgrade. It may cause the product to not  
work properly.  
Do not use USB devices other than USB Flash  
Drives to do software upgrades when using  
the USB Host jack.  
>Move sSelect rReturn  
1. To select By Internet, press the ENTER  
button.  
A popup message appears if an update is  
available asking if you want to upgrade.  
2. If you select Yes, the product turns off  
automatically before restarting, and then  
begins the upgrade. (Never turn it on  
manually here.)  
3. The update progress popup appears.  
When the update is completed, the product  
turns off automatically again.  
Contact Samsung  
Provides contact information for assistance with  
your product.  
4. Press the POWER button to turn on the  
product.  
NOTE  
The Update is complete when the product turns  
off after restarting. Press the POWER button to  
turn on the updated product for your use. Never  
turn the product off or on manually during the  
update process.  
Samsung Electronics shall take no legal  
responsibility for product malfunction caused by  
an unstable internet connection or consumer  
negligence during software upgrade.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
47  
Basic Functions  
Disc Structure  
Playing a Disc  
The contents of disc are usually divided as below.  
Playback  
Blu-ray Disc, DVD-VIDEO  
1. Press the OPEN/CLOSE ( ) button to open  
title 1  
title 2  
chapter 2  
the disc tray.  
chapter 1  
chapter 2  
chapter 1  
chapter 3  
2. Place a disc gently into the tray with the  
disc’s label facing up.  
Audio CD (CD-DA)  
track 1 track 2  
3. Press the PLAY () button or OPEN/  
track 3  
track 4  
track 5  
CLOSE ( ) button to close the disc tray.  
MP3, WMA, DivX, MKV and MP4  
folder (group) 1  
file 1 file 2  
Playback related buttons  
folder (group) 2  
file 2  
file 1  
file 3  
PLAY ( )  
Starts playback.  
Stops playback.  
Using the Disc menu / Title menu / Popup menu  
If you press the button once:  
The stop position will be  
memorized.  
Using the Disc Menu  
If you press the button  
twice: The stop position will  
be not memorized.  
STOP ( )  
hZ  
1. During playback, press the DISC  
MENU button on the remote  
control.  
DISC MENU  
With some Blu-ray discs (BD-J),  
this function may not work.  
2. Press the ▲▼◄ ► buttons to make  
the desired selection, then press the  
ENTER button.  
PAUSE ( )  
Pauses playback.  
NOTE  
NOTE  
Depending on the disc, the menu items may  
differ and this menu may not be available.  
"Not Available" will appear when an invalid  
button is pressed.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
48  
English  
Using the Title Menu  
Using the Search and Skip Functions  
During playback, you can search quickly through  
a chapter or track, and use the skip function to  
jump to the next selection.  
Z
TITLE MENU  
1. During playback, press the TITLE  
MENU button on the remote  
control.  
2. Press the ▲▼◄ ► buttons to  
make the desired selection, then  
press the ENTER button.  
POPUP  
Searching for a Desired Scene  
hzZyx  
During playback, press the SEARCH ()  
NOTE  
button.  
Depending on the disc, the menu items may  
Each time you press the SEARCH ()  
button, the playback speed will change as  
follows.  
differ and this menu may not be available.  
The Title Menu will only be displayed if there  
are at least two titles on the disc.  
BD-ROM,  
) 1 - ) 2 - ) 3 -  
BD-RE/-R,  
) 4 - ) 5 - ) 6 - ) 7  
Playing the Title List  
DVD-RW/-R,  
( 1 - ( 2 - ( 3 -  
( 4 - ( 5 - ( 6 - ( 7  
DVD+RW/+R,  
DVD-VIDEO  
z
) 1 - ) 2 - ) 3  
( 1 - ( 2 - ( 3  
DISC MENU  
1. During playback, press the DISC  
DivX, MKV, MP4  
MENU or TITLE MENU button.  
TITLE MENU  
POPUP  
2. Press the ▲▼ buttons to select an  
entry you want to play from Title  
List, then press the ENTER  
button.  
To return to normal speed playback, press the  
PLAY () button.  
NOTE  
No sound is played in search mode.  
Using the Popup Menu  
Skipping Chapters  
h
TITLE MENU  
POPUP  
1. During playback, press the POPUP  
hzZyx  
During playback, press the SKIP (#$)  
button.  
button on the remote control.  
2. Press the ▲▼◄ ► buttons or  
ENTER button to select the desired  
menu.  
If you press the SKIP ($) button, the disc  
moves to the next chapter.  
NOTE  
If you press the SKIP (#) button, the disc  
moves to the beginning of the chapter. One  
more press makes it move to the beginning of  
the previous chapter.  
Depending on the disc, the menu items may  
differ and this menu may not be available.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
49  
Basic Functions  
Slow Motion Play/Step Motion Play  
Slow Motion Play  
Repeat  
Off  
hzZy  
In pause mode, press the SEARCH ()  
3. To return to normal play, press the REPEAT  
button again.  
button.  
4. Press the ▲▼ buttons to select Off, then  
If you press the SEARCH () button, the  
playback speed is reduced to * 1/8 * 1/4 * 1/2  
press the ENTER button.  
To return to normal speed playback, press the  
NOTE  
PLAY () button.  
Depending on the disc, the Repeat function  
may not be available.  
NOTE  
No sound is played in slow mode.  
Slow motion operates only in the forward  
direction.  
Repeat the Section  
hzZy  
Step Motion Play  
REPEAT  
1. During playback, press the REPEAT  
button on the remote control.  
2. Press the ▲▼ buttons to select  
hzZy  
In pause mode, press the PAUSE ( ) button.  
REPEAT A-B.  
Each time you press the PAUSE ( ) button, a  
new frame appears.  
To return to normal speed playback, press the  
Repeat  
REPEAT A-B : Off  
sMark A  
PLAY ( ) button.  
NOTE  
No sound is played in step mode.  
Step motion operates only in the forward  
direction.  
3. Press the ENTER button at the point where  
you want repeat play to start (A).  
4. Press the ENTER button at the point where  
you want repeat play to stop (B).  
Repeat Playback  
5. To return to normal play, press the REPEAT  
button again.  
Repeat the Title or Chapter  
6. Press the ENTER button.  
hzZy  
NOTE  
Repeat the disc title or chapter.  
If you set point (B) before 5 seconds has  
elapsed, the prohibition message will appear.  
1. During playback, press the  
REPEAT button on the remote  
control.  
REPEAT  
2. Press the ▲▼ buttons to select  
Chapter or Title, then press the  
ENTER button.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
50  
English  
Information about the primary / secondary  
mode is also displayed if the Blu-ray Disc has a  
BONUSVIEW section.  
Use the ◄► button to switch between  
primary and secondary audio modes.  
This function depends on what audio  
languages are encoded on the disc and may  
not be available.  
A Blu-ray Disc can contain up to 32 audio  
languages and a DVD up to 8.  
Using the TOOLS button  
TOOLS  
During playback, you can operate the  
disc menu by pressing the TOOLS  
button.  
TOOLS Menu Screen  
Tools  
:
Title  
1/1  
4/21  
00:12:06  
Chapter  
Playing Time  
Audio  
Subtitle  
Angle  
:
Some Blu-ray Discs may allow you to select  
either the multi-channel LPCM or Dolby digital  
audio soundtrack in English.  
:
:
:
1/7 ENG Multi CH  
1/6 ENG  
1/1  
BONUSVIEW Video :  
BONUSVIEW Audio :  
Picture Setting  
Off  
0/1 Off  
Selecting the Subtitle Language  
<Change  
Enter  
"
hZx  
NOTE  
Depending on the disc, the TOOLS menu may  
differ.  
1. During playback, press the TOOLS button.  
2. Press the ▲▼ buttons to select Subtitle.  
3. Press the ◄► buttons to select the desired  
Moving to a Desired Scene Directly  
subtitle language.  
NOTE  
hzZy  
Depending on the Blu-ray Disc / DVD, you may  
be able to change the desired subtitle in the  
Disc Menu.  
1. During playback, press the TOOLS button.  
2. Press the ▲▼ buttons to select Title,  
Press the DISC MENU button.  
Chapter or Playing Time.  
This function depends on what subtitles are  
encoded on the disc and may not be available  
on all Blu-ray Discs/DVDs.  
A Blu-ray Disc can contain up to 255 subtitle  
languages and a DVD up to 32.  
Information about the primary / secondary  
mode is also displayed if the Blu-ray Disc has a  
BONUSVIEW section.  
3. Enter the desired Title, Chapter or Playing  
Time using the number buttons, then press  
the ENTER button.  
Selecting the Audio Language  
hzZx  
This function changes both the primary and  
secondary subtitles at the same time.  
The total number of subtitles is the sum of the  
primary and secondary ones.  
1. During playback, press the TOOLS button.  
2. Press the ▲▼ buttons to select Audio.  
3. Press the ENTER button.  
4. Press the ▲▼ buttons to select the audio  
language you want.  
NOTE  
The ◄► indicator is not displayed on the  
screen if the BONUSVIEW section does not  
contain any BONUSVIEW audio settings.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
51  
Basic Functions  
User : The user can adjust the sharpness  
and noise reduction function respectively.  
Caption Function  
x
Setting the BONUSVIEW  
You must have some experience with video  
extraction and editing in order to use this  
feature properly.  
h
To use the caption function, save the caption  
file (*.smi) with the same file name as that of the  
DivX media file (*.avi) within the same folder.  
Example. Root Samsung_007CD1.avi  
Samsung_007CD1.smi  
You can use up to 60 alphanumeric characters or 30  
East Asian characters (2 byte characters such as  
Korean and Chinese) for the file name.  
The BONUSVIEW feature allows you to view  
additional content (such as commentaries) in a  
small screen window while the movie is playing.  
This function is only available if the disc has the  
bonusview feature.  
Changing the Camera Angle  
hZ  
When a Blu-ray Disc/DVD contains multiple  
angles of a particular scene, you can use the  
ANGLE function.  
Primary a audio/video  
Secondary a audio/video  
1. During playback, press the TOOLS button.  
2. Press the ▲▼ buttons to select Angle.  
1. During playback, press the TOOLS button.  
3. Press the ◄► buttons to select the desired  
angle.  
2. Press the ▲▼ buttons to select BONUSVIEW  
Video or BONUSVIEW Audio.  
3. Press the ◄► buttons to select the desired  
Selecting the Picture Setting  
bonusview.  
hzZy  
This function lets you to adjust video quality when  
the home theater is connected to a TV via HDMI.  
NOTE  
If you switch from BONUSVIEW Video,  
BONUSVIEW Audio will change automatically  
in accordance with BONUSVIEW Video.  
1. During playback, press the TOOLS button.  
Tools  
2. Press the ▲▼ buttons to select Picture  
Setting, then press the ENTER button.  
BONUSVIEW Video  
BONUSVIEW Audio :  
Picture Setting  
Off  
0/1 Off  
3. Press the ◄► buttons to select the desired  
Picture Setting, then press the ENTER  
button.  
<Change  
Enter  
"
Dynamic : Choose this setting to increase  
Sharpness.  
Normal : Choose this setting for most  
viewing applications.  
Movie : This is the best setting for watching  
movies.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
52  
English  
Listening to Music  
ENTER button : Plays and pauses the selected  
7
8
9
track.  
ow  
Buttons on the Remote Control  
used for Music Playback  
◄► buttons : Fast Play.  
(except for Audio CD (CD-DA))  
STOP button : Stops a track  
.
SKIP ($) button : During playback, moves to  
the next page in the Music List or moves to the  
next track in the Playlist.  
0
!
@
SKIP (  
#
) button : During playback, moves to  
@
the previous page in the Music List or moves to  
the previous track in the Playlist.  
FULL SCREEN  
If you press this button after three seconds  
of playback in the Playlist, the current track is  
replayed from the beginning. But, if you press this  
button within three seconds after playback starts  
in the Playlist, the previous track is played.  
1
2
!
0
3
4
9
8
NUMBER button : During the Playlist playback,  
press the desired track number. The selected  
track will be played.  
TOOLS  
INFO  
5
6
7
RETURN  
A
EXIT  
TUNER  
Playing an Audio CD (CD-DA)/MP3  
MO/ST  
B
D
1. Insert an Audio CD (CD-DA) or an MP3 Disc  
@
INTERNET  
DSP  
into the disc tray.  
Audio CDs (CD-DA) play automatically.  
To start an MP3 disc, press the ◄►  
buttons to select Music, then press the  
ENTER button.  
REPEAT buttons : Selects the play mode in the  
Playlist.  
1
2
3
4
5
6
SEARCH buttons : Fast Play.  
(Audio CD (CD-DA) only)  
PAUSE button : Pauses playback.  
PLAY button : Plays the currently selected track.  
▲▼ buttons : Selects a track in the Music List  
or Playlist.  
YELLOW (C) button : Select or deselect a track  
in the music list.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
53  
Basic Functions  
Audio CD (CD-DA)/MP3 Screen Elements  
Playlist  
1
2
3
1. Insert an Audio CD (CD-DA) or an MP3 Disc into the  
disc tray.  
Playlist  
1/12  
TRACK 001  
TRACK 001  
TRACK 002  
TRACK 003  
TRACK 004  
TRACK 005  
TRACK 006  
Audio CDs (CD-DA) play automatically.  
To start an MP3 disc, press the ◄► buttons to  
select Music, then press the ENTER button.  
05:57  
04:27  
04:07  
03:41  
03:17  
03:35  
7
6
2. To move to the Music List, press the STOP () or  
RETURN button.  
+
00:08 / 05:57  
The Music List screen appears.  
s
Pause  
Tools rReturn  
3. Press the ▲▼◄► buttons to move to the desired  
track, then press the YELLOW (C) button to check  
desired tracks.  
5
4
Repeat this procedure to select additional tracks.  
3 files selected 1/2 Page  
Music TRACK 003  
Displays the music information.  
Displays the playlist.  
1
TRACK 001  
00:05:57  
TRACK 002  
00:04:27  
2
3
4
5
6
7
TRACK 003  
00:04:07  
TRACK 004  
00:03:41  
Shows the current track/total tracks.  
Displays control buttons available.  
TRACK 005  
00:03:17  
TRACK 006  
00:03:35  
TRACK 007  
00:03:47  
TRACK 008  
00:03:49  
TRACK 009  
00:03:53  
TRACK 010  
00:03:45  
Shows the current play time/total play time.  
Displays the current playback status.  
Displays the repeated playback status.  
  
Jump page rReturn  
CDDA  
c Select  
4. If there is an undesired track in the playlist,  
press the YELLOW (C) button again.  
The selected track will be deleted.  
2. Press the ▲▼ buttons to select the track  
you want to play, and then press the ENTER  
button.  
5. Press the ENTER button to play the selected  
tracks.  
1/1  
Playlist  
Repeat an Audio CD (CD-DA)/MP3  
TRACK 001  
TRACK 001  
TRACK 002  
TRACK 003  
05:57  
04:27  
04:07  
REPEAT  
1. During the Playlist playback, press  
the REPEAT button.  
2. Select the desired play mode by  
+
00:08 / 05:57  
pressing the REPEAT button repeatedly.  
Tracks on a disc are played  
Audio CD  
(CD-DA)/MP3  
s
Pause  
Tools rReturn  
Off  
in the order in which they  
were recorded on the disc.  
Audio CD  
(CD-DA)  
MP3  
Audio CD  
(CD-DA)/MP3  
6. To go to the Music List, press the STOP ()  
(
(
(
)Track  
)One  
)All  
Current track is repeated.  
Current track is repeated.  
All tracks are repeated.  
or RETURN button.  
7. To go to the Playlist, press the ENTER  
button.  
NOTE  
The random option plays  
a disc's tracks in random  
order.  
Audio CD  
(CD-DA)/MP3  
(
)Shuffle  
You can create a playlist with up to 99 tracks  
on Audio CD (CD-DA).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
54  
English  
Dolby Pro Logic II Mode  
Sound Mode  
You can select the desired Dolby Pro  
Logic II audio mode.  
DSP (Digital Signal Processor) Function  
DSP  
Press the  
PL II button.  
DSP regulates the volume level and  
decreases drastic volume changes  
when you change channels or during  
a scene transitions.  
Setting the speakers with DPL IIz  
1. Set the DPL IIz of speaker settings to “On”.  
(For further details, refer to page 37.)  
When you press the DSP button, it cycles  
through the following functions:  
2. Press the  
PL II button of the remote  
control until "DPL IIz” or “DPL IIz OFF”  
appears on the display. Set to “DPL IIz” to  
enable sound reproduction from front  
center/height speakers.  
SMART SOUND ¨ MP3 ENHANCER ¨ POWER  
BASS ¨ DSP MODE OFF  
• SMART SOUND : Regulates the volume level  
and deceases drastic volume changes when  
you change channels or during a scene  
transition.  
You can listen to a 2CH sound source in 7.1CH  
surround sound with all speakers active.  
MP3 ENHANCER : This also helps enhance your  
sound experience (ex. mp3 music). You can  
upscale your MP3 level sound (24 kHz, 8bit) to  
CD level sound (44.1 kHz, 16bit).  
DPL IIz  
- A specific speaker(s) may not be output  
depending on the input signal.  
DPL IIz  
OFF  
Select this option to listen through the front left/  
right speakers and the subwoofer only.  
• POWER BASS : This function stresses low  
tones providing deep, powerful sound effects.  
Setting the speakers with DPL IIx  
SFE (Sound Field Effect) MODE  
1. Set the DPL IIz of speaker settings to “Off”.  
(For further details, refer to pages 37.)  
SFE MODE  
You can set the SFE mode best suited  
for the type of music you are listening to.  
2. Press the  
PL II button of the remote  
control until the desired setting is  
When you press the SFE MODE  
button, it cycles through the following  
functions:  
displayed. Once selected with the desired  
mode, sound will be heard through the  
rear speakers.  
When listening to music, you can experience  
sound effects as if you are listening to the  
actual performance.  
Provides a clear vocal as if  
HALL1  
MUSIC  
listening in a concert hall.  
Also provides a clear vocal as if  
listening in a concert hall but, less  
powerful than HALL1.  
CINEMA  
Adds realism to the movie soundtrack.  
HALL2  
You can listen to a 2CH sound source in 7.1CH  
surround sound with all speakers active.  
- A specific speaker(s) may not be output  
depending on the input signal.  
PRO-  
LOGIC  
JAZZ  
Recommended setting for Jazz.  
Gives the feel of being in a grand  
church.  
CHURCH  
MATRIX  
You will hear multi channel surround sound.  
DPL IIx  
GAME  
You can hear like game sound.  
ROCK  
Recommended setting for Rock.  
Select this for normal listening.  
Select this to listen to sound from the front left  
and right speakers and the subwoofer only.  
SFE OFF  
STEREO  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
55  
Basic Functions  
NOTE  
Using the TOOLS button  
The Dolby Prologic II is not available for sound  
source encoded in 7.1 CH format or HD sound.  
For 2 channel audio CD/MP3 playback, wireless  
receiver does not produce sound (for rear and  
front center/height speakers).  
For sound source of DVD 5.1 CH, BD 5.1/7.1  
CH, the wireless receiver produces sound (for  
rear and front center/height speakers) regardless  
of the sound settings. For 2 channel audio  
CD/MP3/TV broadcast, set the Dolby Prologic to  
ON to make wireless receiver produce sound (for  
rear and front center/height speakers).  
TOOLS  
During the slide show playback, you  
can use various function by pressing  
the TOOLS button.  
Tools  
Stop Slide Show  
Slide Show Speed :  
Normal  
Fade1  
Slide Show Effect  
Background Music  
Zoom  
:
Rotate  
Information  
>Move  
"
Enter  
'
Return  
When selecting Dolby Pro Logic II mode,  
connect your external device to the AUDIO  
INPUT jacks (L and R) on the product. If you  
connect to only one of the inputs (L or R), you  
cannot listen to surround sound.  
This mode is available with both 2 channel  
and 5.1 channel audio. 7.1ch audio is directly  
transmitted without any transformation.  
Stop Slide Show : Select this if you want to  
stop the slide show.  
Slide Show Speed : Select if you want to  
adjust the Slide Show speed.  
Slide Show Effect : Select if you want to set  
the Slide Show Effect.  
Playing back a Picture  
Background Music : Select if you want to  
listen to music while viewing a picture.  
G
Zoom : Select if you want to enlarge the  
current picture. (Enlarged up to 4 times)  
Playing a JPEG Disc  
Rotate : Select if you want to rotate the  
picture. (This will rotate the picture either  
clockwise or counter clockwise.)  
1. Insert a JPEG disc into the disc tray.  
2. Press the ◄► buttons to select Photos,  
Information : Shows the picture information  
and then press the ENTER button.  
including the name and size, etc.  
3. Press the ▲▼◄► buttons to select the  
folder you want to play, and then press the  
ENTER button.  
4. Press the ▲▼◄► buttons to select the  
photo you want to play, and then press the  
ENTER button.  
NOTE  
Before you can enable the background music  
function, the photo file should exist in the same  
storage media with the music file. However,  
the sound quality can be affected by the bit  
rate of the MP3 file, the size of the photo, and  
the encoding method.  
NOTE  
You can't enlarge the subtitle and PG graphic  
in the full screen mode.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
56  
English  
NOTE  
Playing Back a USB Storage Device  
You must remove the USB storage device  
safely by performing the “Safe to Remove  
Hardware” function to prevent possible  
damage to the USB memory. Press the MENU  
button to move to the main screen, press the  
YELLOW (C) button, and then press the ENTER  
button.  
When the Audio-CD (CD-DA), MP3, or JPEG  
files are in stop mode, you can't see the full  
screen by pressing the FULL SCREEN button on  
the remote control.  
If you insert a disc when playing a USB storage  
device, the device mode is changed to “DVD  
or CD” automatically.  
To listen to your music files with 7.1 channel sound,  
you must set the Dolby Pro Logic ll mode to Matrix.  
(See page 55)  
F
You can use the USB connection to play multimedia  
files (MP3, JPEG, DivX, etc.) downloaded from a USB  
storage device.  
1. Move to the Home menu.  
2. In Stop mode, connect the USB storage device  
to the USB port on the front panel of the product.  
The message “Do you want to access the  
device?” appears.  
3. Press the ◄► button to select Yes, then  
press the ENTER button.  
4. Press the RED (A) button or the BLUE (D)  
button. If you pressed the RED (A) button,  
go to Step 5. If you pressed the BLUE (D)  
-1  
button, go to Step  
4
>
TV service  
Please activate Intern  
e
t
@
to enjoy a variety of Internet Services.  
Listening to Radio  
Using buttons on the Remote Control  
CD  
USB  
1. Press the FUNCTION button to select FM.  
USB a Change Device  
c Safely Remove USB d View Devices  
Enter  
"
2. Tune in to the desired station.  
Automatic Tuning 1 : When the # $ button  
5. Press the ▲▼ buttons to select USB, then  
press the ENTER button.  
is pressed, a preset broadcast station is selected.  
Automatic Tuning 2 : Press and hold the  
6. Press the ◄► buttons to select the desired  
Videos, Music or Photos, then press the  
ENTER button. Go to Step 7.  
TUNING/CH (  
) button to search for active  
broadcasting stations automatically.  
4-1. Press the BLUE (D) button, the screen  
Manual Tuning : Press the TUNING/CH  
below appears. Go to 5-1  
.
(
) button to increase or decrease the  
frequency incrementally.  
Please activate Internet@TV service  
to enjoy a variety of Internet Services.  
Using the buttons on the home theater  
USB  
1. Press the FUNCTION (  
) button to select FM.  
2. Select a broadcast station.  
Automatic Tuning 1 : Press the STOP ( I )  
button to select PRESET and then press the  
# $ button to select the preset station.  
Automatic Tuning 2 : Press the STOP ( I )  
button to select MANUAL and then press and  
hold the # $ button button to search the  
band automatically  
USB  
d Home  
Enter  
"
5-1. Press the ◄► buttons to select USB, then  
press the ENTER button.  
6-1. Press the ▲▼ buttons to select the desired  
Videos, Music or Photos, then press the  
ENTER button.  
Manual Tuning : Press the  
button to  
STOP ( I )  
and then press the # $  
button to tune in to a lower or higher frequency.  
7. To play back Video, Music, or Photo files,  
select MANUAL  
see pages 48~56.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
57  
Basic Functions  
Setting Mono/Stereo  
Press the MO/ST button.  
Using an iPod  
You can enjoy music and video files from an iPod  
through the product.  
MO/ST  
D
Each time the button is pressed, the  
sound switches between STEREO  
and MONO.  
iPod  
In a poor reception area, select  
MONO for a clear, interference-free reception.  
iPod  
Presetting Stations  
Example : Presetting FM 89.10 into memory  
1. Press the FUNCTION button to select FM.  
TUNING/CH  
2. Press the  
(
)
button to select  
<89.10>.  
3. Press the TUNER MEMORY button.  
NUMBER flashes on the display.  
TUNER  
MEMORY  
Listening to Music  
C
4. Press the # $ button to select  
You can play music files stored in the iPod player by  
connecting it to the product.  
preset number.  
You can select between 1 and 15  
presets.  
5. Press the TUNER MEMORY button again.  
Please activate Internet@TV service  
to enjoy a variety of Internet Services.  
Press the TUNER MEMORY button before  
NUMBER disappears from the display.  
NUMBER disappears from the display and  
the station is stored in memory.  
6. To preset another station, repeat steps 2 to 5.  
No disc  
MEMU  
iPod  
To tune in to a preset station, press the # $  
button on the remote control to select a channel.  
No Disc  
a Change Device  
d View Devices s Enter  
1. Connect the iPod dock connector to the iPod  
jack on the rear panel of the product.  
2. Place the iPod in the supplied iPod Dock.  
Your iPod is automatically turned on.  
“iPod” message appears on the TV screen.  
3. Press the RED (A) button.  
4. Press the ▲▼ buttons to select iPod, then press  
the ENTER button.  
5. Press the ◄► buttons to select Music, then  
press the ENTER button.  
6. Select the music file to play.  
-
You can use the remote control or product to  
control simple playback functions such as the  
PLAY, PAUSE, STOP, #/ $, / and  
REPEAT buttons. See page 18.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
58  
English  
NOTE  
3. Place the iPod in the supplied iPod Dock.  
“iPod” message appears on the TV screen.  
4. Press the RED (A) button.  
Adjust the volume to a moderate level before you  
connect your iPod and product.  
When the product is powered on and you connect  
an iPod, the product charges your iPod's battery.  
Make sure to connect the dock connector so that  
the label “SAMSUNG” faces upward.  
5. Press the ▲▼ buttons to select iPod, then press  
the ENTER button.  
6. Press the ◄► buttons to select Videos, then  
press the ENTER button.  
“Made for iPod” means that an electronic accessory  
has been designed to connect specifically to the  
iPod and has been certified by the developer to meet  
Apple performance standards.  
“Works with iPhone” means that an electronic  
accessory has been designed to connect specifically  
to an iPhone and has been certified by the developer  
7. Select the video file to play.  
- You can use the remote control or the product to  
control simple playback functions such as the  
PLAY, PAUSE, STOP, # /$ and /  
buttons. (See page 18.)  
iPod/iPhone models you can use with  
this product  
to meet Apple performance standards.  
iPod Music categories  
iPod touch (3rd generation)  
iPod touch (2nd generation)  
iPod touch (1st generation)  
File information including the artist name, album name,  
music title and genre is displayed according to the ID3  
Tag information on each music file.  
iPod classic  
iPod with video  
Now  
Playing  
Plays a recently played file or moves to  
the playback screen of the current file.  
iPod with dock connector  
iPod with Click Wheel  
Artist  
Songs  
To play by artist.  
iPod nano (5th generation)  
iPod nano (4th generation)  
iPod nano (3rd generation)  
iPod nano (2nd generation)  
iPod nano (1st generation)  
To play in numeric or alphabetical order  
To play by Playlist.  
Playlist  
Album  
To play by album.  
Generic  
Composers  
To play by genre.  
iPhone 3GS  
iPhone 3G  
iPhone  
To play by composer.  
NOTE  
The category list may differ, depending on the  
iPod model.  
NOTE  
You must have the VIDEO output (Composite)  
connected to your TV to view iPod video (See  
page 27).  
What is an ID3 Tag?  
This is what is attached to an MP3 to carry  
information relevant to the file such as the title,  
artist, album, year, genre and a comment field.  
If you want to view an iPod video via VIDEO  
output, set Anynet+ (HDMI-CEC) to off.  
No other screen than the playback screen  
appears on the TV screen. View other iPod  
screens on the iPod player.  
Watching a Movie  
You can play video files stored in the iPod player  
by connecting it to the product.  
If the connected iPod does not support video  
playback, the “Cannot play video files saved on  
this iPod” message appears when you select the  
Video menu.  
Apple is not responsible for the operation of this  
device or its compliance with safety and  
regulatory standards.  
1. Connect the iPod dock connector to the iPod jack  
on the rear panel of the product.  
2. In the iPod screen, move to Settings > Videos,  
then set the TV Out option and the TV signal.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
59  
Network Services  
You can enjoy various network services such as  
Internet@TV or BD-LIVE by connecting the  
product to the network system.  
4. After you have signed off on the service  
agreement, the Internet@TV service starts  
updating. It takes several minutes. When the  
update is complete, you will see the  
Internet@TV menu screen.  
Check the following instructions before using  
any network service.  
1. Connect the product to the network.  
Internet@TV at a Glance  
(see pages 29~30)  
1
2
3
2. Configure the network settings.  
(see pages 42~45)  
Recommended  
Contents  
1
Contents  
2
2
Contents  
Contents  
3
3
Contents  
4
Using Internet@TV  
My Applications  
by Date 1/3  
Contents  
1
Contents  
Connect this product to the network to download  
various for a fee or free-of-charge applications.  
Internet@TV brings useful and entertaining  
content and services directly from the web to  
your product such as news, weather forecasts,  
stock market quotes, games, movies, and music.  
Samsung AppS Settings  
aLogin bMark as Favorite dSort by  
Return  
'
6
5
4
@
INTERNET  
You can also initiate this function  
by pressing the INTERNET@ button  
on the remote control.  
Commercial : Displays Internet@TV Guide,  
product introduction and new application  
introduction.  
1
Recommended : Displays recommended  
2
3
contents managed by Samsung.  
Getting Started with Internet@TV  
My Application : Displays your personal gallery  
in which you can add and delete applications.  
1. Move to the home menu.  
Navigation Help : Displays the remote control  
buttons available.  
TV service  
to enjoy a variety of Internet Services.  
Please activate Intern  
e
t
@
RED (A) : To log in to to Internet@TV.  
GREEN (B) : To mark the application as  
a favorite.  
4
BLUE (D) : To sort the applications.  
Return : To return to the previous  
menu.  
No Disc  
a Change Device  
d View Devices  
Enter  
"
Settings : You can set up the system and create  
5
6
accounts, etc.  
2. Press the ◄► buttons to select Internet@  
Samsung AppS : You can download various for  
a fee or free-of-charge application services.  
TV and press the ENTER button.  
3. In the start screen of the Internet@TV service,  
you will see the service agreement screen.  
You must agree to the service terms and  
conditions before you can use the Internet@  
TV service.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
60  
English  
13. Press the ENTER button.  
Using the On-Screen Keypad  
14. The map and address appear on the screen.  
Through your remote, you can use the On-  
Screen Keypad in several Internet@TV  
applications to enter text.  
Pressing the FULL SCREEN button on the  
remote while you are using the Screen Keypad  
lets you change the text fields to lower case,  
upper case, numbers, and icons.  
NOTE  
Samsung Electronics shall take no legal  
responsibility for any interruption of the  
Internet@TV service caused by the service  
provider for any reasons.  
The Internet@TV service downloads and  
processes data via the Internet so that you can  
enjoy the contents on the TV screen.  
If the Internet connection is unstable, the  
service may be delayed or interrupted.  
If the connection is especially unstable, your  
home theater may turn off automatically.  
If this occurs, check the Internet connection  
and try again.  
abc  
jkl  
def  
mno  
wxyz  
1
4
7
2
5
8
0
3
6
9
ghi  
pqrs  
tuv  
Input Mode  
Delete  
a
A
1
For example, here is how to use the Keypad to  
search for an address in Google Maps:  
Internet@TV applications may be provided in  
English only and the contents available may  
vary, depending on the area.  
1. Press the ENTER button on the remote at  
the Google Maps icon at the Internet@TV.  
For more information about the Internet@TV  
service, visit the web site of the applicable  
service provider.  
2. Press the GREEN (B) button to use the  
SEARCH function.  
3. Press the ◄► buttons to move to the  
The services provided are subject to change,  
depending on the Internet@TV service  
provider.  
"Search or address" window.  
4. Press the ENTER button to use the Search  
or address function.  
The Internet@TV service contents may differ  
according to the firmware version on your  
device.  
5. Let's say that you want to input “105  
Challenger Rd., Ridgefield Park NJ’.  
6. Press the FULL SCREEN button on the  
remote twice to change the input mode from  
lower case to numbers.  
For-a-fee DivX contents with copy protection  
can only be played using HDMI cable. If you  
have connected your product to your TV using  
Component or video cables, the DivX video  
signal can not output. You may see the popup  
message “Connect with a HDMI cable to play  
this file.”or “Cannot play current file”.  
7. Press ‘1’, ‘0’, ‘5’.  
8. Press the YELLOW (C) button on the remote  
to input a blank space.  
9. Press the FULL SCREEN button on the  
remote 3 times to change the input mode  
from numbers to upper case.  
10. Press ‘2’ button on the remote 3 times to  
input C.  
11. Press the FULL SCREEN button on the  
remote 3 times to change the input mode  
from upper case to lower case.  
12. Press buttons on the remote to input the rest  
of ‘Challenger Rd., Ridgefield Park NJ’.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
61  
Network Services  
Account Login  
System Setup  
Reset  
For a more enjoyable application experience,  
register and log in to your account.  
To do this, you must create an account first. (For  
instructions on creating an account, refer to  
Internet@TV ID on this page)  
Resets Internet@TV settings to factory default  
settings.  
NOTE  
1. Press the ▲▼◄► buttons to select the  
desired application and press the RED (A)  
button.  
If you forgot your password, press the STOP  
() button on the front panel of the product for  
more than 5 seconds with no disc inserted.  
Login  
Internet@TV ID  
Use this menu to create or delete an account and  
enter or delete account information.  
You can control your account including the  
content site’s account information.  
User Account :  
Password :  
admin  
This account is only for Internet@TV.  
a Create  
[0~9] Enter PIN  
'
Cancel  
Create  
Create an account and link it with desired service  
applications.  
2. Enter the user account and password.  
Settings  
NOTE  
Create IDs and configure Internet@TV settings on  
this screen.  
The account name must be at least 1  
character in length but no more than 8.  
Settings  
You can register up to 10 User Account  
Names.  
. System setup  
. Internet@TV ID  
. Service Manager  
. Properties  
Change the Service Lock password  
Reset  
Manager  
Service Site : Register login information for  
service sites.  
Change Password : Change account  
password.  
Delete : Delete the account.  
'
Cancel  
Download from Www.Somanuals.com. All Manuals Search And Download.  
62  
English  
Using the color buttons with the Samsung  
Apps  
Service Manager  
Delete and lock applications installed in Internet@  
TV.  
RED (A) (Login) : To log in to the Internet  
service.  
GREEN (B) (Thumbnail View) : To change  
the view mode.  
BLUE (D) (Sort By) : To sort the applications  
by Featured, Most Downloaded, Most Recent  
or Name.  
Lock  
Lock the application. Accessing a locked  
application requires a password.  
Delete  
Delete the application.  
Internet@TV Services Available  
YouTube/Pandora/Netflix/Blockbuster/USA  
Today News  
Properties  
- Blockbuster : You can view movies streamed  
by Bloxckbuster.  
Display information about Internet@TV. Use the  
"Check the speed of your internet connection"  
option to test your network connection.  
- YouTube : You can view video streamed by  
YouTube.  
- Netflix : You can view movies streamed by  
Netflix.  
- Pandora : You can listen to Internet radio.  
- USA Today News : You can read news  
streamed by USA Today News.  
- AccuWeather : You can view weather  
information by AccuWeather.  
- Google Maps : You can view maps by  
Google Maps and search for locations.  
Samsung AppS  
Various applications are available through this  
screen, organized into different categories.  
Some applications have a download fee.  
Samsung AppS  
Video  
1/1  
Featured  
Most downloaded  
Most recent  
Name  
What's New!  
Video  
YouTube  
Free  
Sports  
TV store Test User002  
Lifestyle  
Games  
NOTE  
Infomation  
Other  
The available Internet contents services may  
be added or deleted.  
My Applications  
Help  
a Login b Thumbnail View d Sort By  
'
Return  
My Applications  
Displays the application list.  
Help  
If you questions about Internet@TV, check this  
section first. If none of the tips apply, please visit  
the help website.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
63  
Network Services  
BD-LIVE™  
Using the AllShare Function  
Once the product is connected to the network,  
you can enjoy various movie-related service  
contents using a BD-LIVE compliant disc.  
1. Check the size of the remaining memory.  
The memory device must have at least 1GB  
of free space to accommodate the BD-LIVE  
services.  
AllShare lets you play music, video and photo  
files in your PC using the product.  
To use AllShare, you must connect the product to  
your PC via the network (See pages 29~30) and  
install the SAMSUNG PC Share Manager on the  
PC. To install Share Manager, follow these steps.  
2. Insert a Blu-ray disc that supports BD-LIVE.  
com.  
3. Select an item from various BD-LIVE service  
2. Download the SAMSUNG PC Share  
contents provided by the disc manufacturer.  
Manager and install it on the PC.  
3. When the installation is completed, you will  
see the SAMSUNG PC Share Manager icon  
on your desktop.  
NOTE  
The way you use BD-LIVE and the provided  
contents may differ, depending on the disc  
manufacturer.  
Double-click the icon to launch the  
application.  
Software Upgrade Notification  
AllShare Program at a Glance  
When connected to the network, the product can  
notify you of any new software version with a  
popup message.  
6
1
SAMSUNG PC Share Manager  
File Share Server Help  
Server : PC Share Manager  
1. Turn on the product.  
2 3 4 5  
My Computer  
Shared Folder  
Folder  
Folder 1  
C: Document and settings Admin  
Full Path  
C: Document and settin..  
2. In the Software Upgrade menu, set Auto  
Upgrade Notification to On. (See page 47)  
If there is a new software version available,  
the product notifies you with a popup  
message.  
Name  
Folder 1  
Size  
Kind  
File  
Folder 2  
Folder 3  
File  
File  
3. To upgrade the firmware, select Yes on the  
pop-up.  
The product turns off automatically, then  
restarts, and begins the download.  
(Never turn it on manually.)  
8
7
Menu Bar  
1
4. The update progress popup appears.  
When the update is completed, the product  
turns off again automatically.  
Share Folder Enabled icon : Use this if you  
want to select a folder in your PC to share.  
Share Folder Disabled icon : Use this if you  
want to set folder sharing off.  
Refresh icon : Use this if you want to refresh  
list of folders and files in My Computer.  
Set Change State icon : You must click the  
Set Change State icon after you have selected  
a folder to share or your home theater won't  
be able to read the shared folder.  
Server : Displays the name of the sharing server.  
Shared Folder : Displays a list of the shared  
folders.  
My Computer : Displays a list of the folders  
and files in the PC.  
2
3
4
5. Press the POWER button to turn on the product  
.
NOTE  
Update is complete when the product turns off  
after downloading and then restarts. Press the  
POWER button to turn on the updated  
product for your use.  
5
Never turn the product off or on manually  
during the update process.  
6
7
Samsung Electronics shall take no legal  
responsibility for product malfunction caused by  
unstable of internet connection or consumer  
8
negligence during software upgrade.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
64  
English  
AllShare does not support the following  
functions.  
To use Share Manager, follow these steps:  
- The Background Music and Background  
Music Setting functions.  
1. Select a folder to share from the My  
computer pane, and click the Share Folder  
Enabled icon
).  
- Sorting files by preference in the Photo,  
Music, and Movie folders.  
- The Change Group function.  
- The Safe Remove function.  
(To remove a shared folder : Select a folder  
to remove from the shared folders, and click  
the Share Folder Disabled icon
).)  
2. To apply the updated sharing state to the  
The Sorting method may differ depending on  
the server function.  
server, click the Set Change State icon
).  
3. To enable the product to locate a PC server,  
click Share from the menu bar.  
The search and skip operation may differ  
depending on the server function.  
Click Set Device Policy and click Accept.  
During video playback, play time is not  
displayed.  
SAMSUNG PC Share Manager  
File Share Server Help  
Server : PC Share Manager  
Set Device Policy  
To use the AllShare function, please place both  
this product and the PC in the same subnet.  
My Co
Delete  
Item  
Selected
C:
IP Device  
State  
Set State  
settin..  
Na
Accept  
XXX.XXX.X.XX SAMSUNG Blu-ray Disc Player  
Deny  
F
F
F
OK  
Cancel  
4. Click the Set Change State icon
)
and  
move to the home menu on the product.  
5. To select a device, use the RED (A) or  
BLUE (D) button to select a file to play.  
(To play back Video, Music, or Photos files,  
see pages 48~56.)  
TV service  
Please activate Intern  
e
t
@
to enjoy a variety of Internet Services.  
No Disc  
a Change Device  
d View Devices  
Enter  
"
NOTE  
Depending on the performance of the external  
modem or router, HD video may not play  
properly.  
If your system uses a firewall, the product may  
not locate your PC on the TV screen.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
65  
Other information  
Troubleshooting  
Refer to the chart below when this product does not function properly. If the problem you are  
experiencing is not listed below or if the instructions below do not help, turn off the product,  
disconnect the power cord, and contact Samsung Electronics at 1-800-SAMSUNG.  
Symptom  
Check/Remedy  
I cannot eject the disc.  
• Is the power cord plugged securely into the outlet?  
• Turn off the power and then turn it back on.  
The iPod fails to connect.  
Playback does not start.  
• Check the condition of the iPod connector and Dock.  
• Keep the iPod S/W version up to date.  
• Check the region number of the BD/DVD.  
BD/DVD discs purchased from abroad may not be playable.  
• CD-ROMs and DVD-ROMs cannot be played on this Product.  
• Make sure that the rating level is correct.  
Playback does not start  
immediately when the  
Play/Pause button is pressed.  
• Are you using a deformed disc or a disc with scratches on the surface?  
• Wipe the disc clean.  
Sound is not produced.  
No sound is heard during fast playback, slow playback, and step motion playback.  
Are the speakers connected properly? Is the speaker setup correctly customized?  
• Is the disc severely damaged?  
Sound can be heard only from a  
few speakers and not all 8.  
• On certain BD/DVD discs, sound is output from the front speakers only.  
• Check if the speakers are connected properly.  
• Adjust the volume.  
• When listening to a CD, radio or TV, sound is output to the front speakers only.  
Select "PRO LOGIC II" by pressing  
control to use all six speakers.  
PL II (Dolby Pro Logic II) on the remote  
Dolby Digital 7.1 CH Surround  
Sound is not produced.  
Is there "Dolby Digital 7.1 CH" mark on the disc? Dolby Digital 7.1 CH Surround Sound is  
produced only if the disc is recorded with 7.1 channel sound.  
• Is the audio language correctly set to Dolby Digital 7.1-CH in the information  
display?  
The remote control does not work.  
Is the remote control being operated within its operational angle and distance ranges?  
• Are the batteries drained?  
Have you selected the mode (TV/BD) functions of the remote control (TV or BD) correctly?  
• Disc is rotating but no  
picture is produced.  
• Is the TV power on?  
• Are the video cables connected properly?  
• Is the disc dirty or damaged?  
• Picture quality is poor and  
picture is shaking.  
• A poorly manufactured disc may not be playable.  
Audio language and subtitles do  
not work.  
Audio language and subtitles will not work if the disc does not contain them.  
Menu screen does not appear  
even when the menu function is  
selected.  
• Are you using a disc that does not contain menus?  
Download from Www.Somanuals.com. All Manuals Search And Download.  
66  
English  
Symptom  
Check/Remedy  
Aspect ratio cannot be changed.  
• You can play 16:9 BD/DVDs in 16:9 Wide mode, 4:3 Letter Box mode, or 4:3  
Pan - Scan mode, but 4:3 BD/DVDs can be seen in 4:3 ratio only. Refer to the  
Blu-ray Disc jacket and then select the appropriate function.  
• The product is not working.  
(Example: The power goes out  
or a strange noise is heard.)  
• Turn off the power, and press and hold the STOP ( I ) button on the product  
for longer than 5 seconds.  
- Using the RESET function will erase all stored settings.  
Do not use this unless necessary.  
The Product is not working  
normally.  
The rating level password has  
been forgotten.  
• With no disc in the product, press and hold the product's STOP ( I ) button for  
longer than 5 seconds. INIT appears on the display and all settings will return  
to the default values.  
And then press the POWER button.  
- Using the RESET function will erase all stored settings.  
Do not use this unless necessary.  
Can't receive radio broadcasts.  
• Is the antenna connected properly?  
• If the antenna's input signal is weak, install an external FM antenna in an area  
with good reception.  
While listening to TV audio  
through the Product, no sound is  
heard.  
If the OPEN/CLOSE ( ) button is pressed while listening to TV audio using the  
D.IN or AUX functions, the BD/DVD functions are turned on and the TV audio is  
muted.  
"Not Available" appears on  
screen.  
• The features or action cannot be completed at this time because:  
1. The BD/DVD’s software restricts it.  
2. The BD/DVD’s software doesn’t support the feature (e.g., angles)  
3. The feature is not available at the moment.  
4. You’ve requested a title or chapter number or search time that is out of range.  
No HDMI output.  
• Check the connection between the TV and the HDMI jack of the Product.  
• Check if your TV supports 480p/720p/1080i/1080p HDMI input resolution.  
Abnormal HDMI output screen.  
• If random noise appears on the screen, it means that TV does not support  
HDCP (High-bandwidth Digital Content Protection).  
If the HDMI output is set to a resolution  
your TV cannot support (for example,  
1080p), you may not see a picture on  
your TV.  
• Press the STOP () button (on front panel) for more than 5 seconds with no  
disc inside. All settings will revert to the factory settings.  
• When the factory default settings are restored, all the user data stored in the  
BD data will be deleted.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
67  
Other information  
Symptom  
Check/Remedy  
PC Share Manager function  
I can see folders shared through the  
PC Share Manager, but I cannot see  
the files.  
• Since it shows only files corresponding to the Image, Music, and Movie  
categories, files that do not correspond to these categories may not be  
displayed.  
AllShare function  
Video is played intermittently.  
Check if the network is stable.  
Check if the network cable is properly connected and if the network is not  
overloaded.  
Wireless connection between the server and the product is unstable.  
Check the connection.  
AllShare connection between TV  
and PC is unstable.  
IP address under the same subnetwork should be unique, otherwise IP  
collision can results in such a phenomenon.  
Check if you have a firewall enabled.  
If so, disable the firewall function.  
BD-LIVE  
I cannot connect to the BD-LIVE  
server.  
• Check whether the network connection is successful or not by using Network  
Test menu. (See page 45)  
• Check whether the USB memory device is connected with product or not.  
• The memory device must have at least 1GB of free space to accommodate the  
BD-LIVE service.  
You can check the available size in BD Data Management. (See page 40)  
• Please check whether the BD-LIVE Internet Connection menu is set to Allow  
(All).  
• If all above fails, contact the contents provider or update the latest firmware.  
When using the BD-LIVE service,  
an error occurs.  
The memory device must have at least 1GB of free space to accommodate the  
BD-LIVE service.  
You can check the available size in BD Data Management. (See page 40)  
NOTE  
When the factory default settings are restored, all the user data stored in the BD data will be deleted.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
68  
English  
Index  
A
D
P
Accessories  
AllShare  
15  
64  
52  
40  
37  
51  
40  
Digital Output  
Disc menu  
Display  
39  
48  
33  
41  
41  
55  
55  
40  
Parental Rating  
Playlist  
46  
54  
49  
46  
36  
Angle  
Popup menu  
Anynet+ (HDMI-CEC)  
Audio  
Audio Language  
AV Sync  
DivX(R) Deactivation  
DivX(R) Registration  
Dolby Pro Logic ll Mode  
DSP  
Power On/Off Sound  
Progressive Mode  
R
Region code  
Remote Control  
Remote control sensor  
Repeat  
12  
18  
16  
Dynamic Range Control  
B
E
Background  
BD-Live  
BD-LIVE Internet Connection 45  
BD Data Management  
BD Wise  
Before Starting (Initial settings) 31  
BONUSVIEW  
46  
64  
EQ Optimizer  
38  
46  
46  
50, 54  
34  
Resolution  
F
40  
34  
S
Front Display  
Search  
Security  
Setting the Menu  
Setup  
SFE  
Skip  
SLEEP (timer)  
Slow motion  
Software Upgrade  
Speaker Setting  
Step motion  
Still Mode  
Subtitle Language  
Support  
System  
49  
46  
32  
31  
55  
49  
18  
50  
47  
37  
50  
36  
51  
47  
40  
G
52  
General  
C
H
Change Password  
Clock  
Connections  
Speaker  
Wireless receiver module 23  
TV  
HDMI  
FM Antenna  
Component  
Composite  
Set-Top Box  
OPTICAL  
AUX  
Network  
LAN Cable  
Wireless Network  
Contact Samsung  
46  
41  
20  
20  
HDMI Audio  
HDMI Deep Color  
HDMI Format  
38  
36  
36  
I
25  
25  
26  
27  
27  
28  
28  
28  
29  
29  
30  
47  
Initial Settings  
Internet@TV  
Internet@TV Screen Size  
iPod  
40  
60  
40  
58  
L
T
Language  
Light Effect  
45  
46  
3D  
Title menu  
Title list  
TV Aspect  
TV Screen Saver  
33  
49  
49  
34  
32  
M
Mono/Stereo  
58  
36  
38  
18  
Movie Frame (24 Fs)  
Musical Room Calibration  
MUTE  
U
USB Storage  
57  
56  
N
Z
Network Setup  
Network Settings  
Network Status  
42  
42  
45  
Zoom  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
69  
Other information  
Specifications  
Power Requirements  
Power Consumption  
AC 120V, 60Hz  
75 W  
Weight  
General  
8.3 Ibs  
Dimensions  
16.9 (W) x 2.4 (H) x 13.0 (D) inches  
+41°F to +95°F  
Operating Temperature Range  
Operating Humidity Range  
Signal/noise ratio  
10 % to 75 %  
70 dB  
FM Tuner  
Usable sensitivity  
10 dB  
Total harmonic distortion  
BD (Blu-ray Disc)  
0.5 %  
Reading Speed : 4.917m/sec  
Reading Speed : 3.49 ~ 4.06 m/sec.  
Approx. Play Time (Single Sided, Single Layer Disc) : 135 min.  
Reading Speed : 4.8 ~ 5.6 m/sec.  
Maximum Play Time : 74 min.  
Reading Speed : 4.8 ~ 5.6 m/sec.  
Maximum Play Time : 20 min.  
1 channel : 1.0 Vp-p (75 Ω load)  
DVD (Digital Versatile Disc)  
Disc  
CD : 5 inches (COMPACT DISC)  
1
CD : 3 /2 inches (COMPACT DISC)  
Composite Video  
Component Video  
Blu-ray Disc : 480i  
DVD : 480i  
Y : 1.0 Vp-p (75 Ω load)  
Pr : 0.70 Vp-p (75 Ω load)  
Pb : 0.70 Vp-p (75 Ω load)  
Video Output  
Video/Audio  
Blu-ray Disc : 1080i, 720p, 480p, 480i DVD : 480p, 480i  
2D : 1080p, 1080i, 720p, 480p  
3D : 1080p, 720p  
HDMI  
PCM multichannel audio, Bitstream audio, PCM audio  
Front speaker output  
165W x 2 (3  
Ω)  
Center speaker output  
170W (3Ω)  
Surround speaker output  
Surround Back Speaker output  
Subwoofer speaker output  
165W x 2 (3  
Ω
)
)
165W x 2 (3  
Ω
170W (3Ω)  
Amplifier  
Analog input  
Digital input  
70dB  
20Hz~20kHz ( 3dB)  
20Hz~44kHz ( 3dB)  
Frequency response  
S/N Ratio  
Channel separation  
Input sensitivity  
60dB  
(AUX)500mV  
Download from Www.Somanuals.com. All Manuals Search And Download.  
70  
English  
7.1ch speaker system  
Speaker system  
Front  
3 Ω  
Surround/Surround back Center  
Subwoofer  
3 Ω  
Impedance  
3 Ω  
3 Ω  
Frequency range  
Output sound pressure level  
Rated input  
140Hz~20kHz 140Hz~20kHz  
140Hz~20kHz 40Hz ~ 160Hz  
87dB/W/M  
165W  
87dB/W/M  
165W  
87dB/W/M  
170W  
88dB/W/M  
170W  
Speaker  
Maximum input  
330W  
330W  
340W  
340W  
Front : 3.54 x 51.18 x 4.69 inches (Stand base : 9.84 x 9.84 inches)  
Surround/Surround back : 3.54 x 5.57 x 2.7 inches  
Center : 14.17 x 2.93 x 2.7 inches  
Dimensions (W x H x D)  
Weights  
Subwoofer : 6.61 x 13.78 x 11.61 inches  
Front : 7.21 Ibs, Surround/Surround back : 1.28 Ibs  
Center : 1.28 Ibs , Subwoofer : 9.92 Ibs  
*: Nominal specification  
- Samsung Electronics Co., Ltd reserves the right to change the specifications without notice.  
- Weight and dimensions are approximate.  
- Design and specifications are subject to change without prior notice.  
SWA-5000  
AC 120V ~60Hz  
50 W  
Power Requirements  
Power Consumption  
Weight  
2.52 lbs  
3 x 9 x 6 inches  
+41°F to +95°F  
10% ~ 75%  
165W x 2 CH  
20Hz~20KHz  
Dimensions (W x H x D)  
Operating Temperature Range  
Operating Humidity Range  
Output  
Frequency range  
65dB  
S/N Ratio  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
71  
LIMITED WARRANTY TO ORIGINAL PURCHASER  
This SAMSUNG brand product, as supplied and distributed by Samsung Electronics America, Inc. (SAMSUNG) and delivered  
new, in the originalcarton to the original consumer purchaser, is warranted by SAMSUNG against manufacturing defects in  
materials and workmanship for a limited warranty period of:  
One (1) Year Parts and Labor*  
(*90 Days Parts and Labor for Commercial Use)  
This limited warranty begins on the original date of purchase, and is valid only on products purchased and used in the United  
States. To receive warranty service, the purchaser must contact SAMSUNG for problem determination and service procedures.  
Warranty service can only be performed by a SAMSUNG authorized service center. The original dated bill of sale must be  
presented upon request as proof of purchase to SAMSUNG or SAMSUNG's authorized service center. Transportation of the  
product to and from the service center is the responsibility of the purchaser.  
SAMSUNG will repair or replace this product, at our option and at no charge as stipulated herein, with new or reconditioned  
parts or products if found to be defective during the limited warranty period specified above. All replaced parts and products  
become the property of SAMSUNG and must be returned to SAMSUNG. Replacement parts and products assume the  
remaining original warranty, or ninety (90) days, whichever is longer.  
SAMSUNG’s obligations with respect to software products distributed by SAMSUNG under the SAMSUNG brand name are set forth in  
the applicable end user license agreement. Non-SAMSUNG hardware and software products, if provided, are on an “AS IS” basis.  
Non-SAMSUNG manufacturers, suppliers, publishers, and service providers may provide their own warranties.  
This limited warranty covers manufacturing defects in materials and workmanship encountered in normal, and except to  
the extent otherwise expressly provided for in this statement, noncommercial use of this product, and shall not apply to the  
following, including, but not limited to: damage which occurs in shipment; delivery and installation; applications and uses for  
which this product was not intended; altered product or serial numbers; cosmetic damage or exterior finish; accidents, abuse,  
neglect, fire, water, lightning or other acts of nature; use of products, equipment, systems, utilities, services, parts, supplies,  
accessories, applications, installations, repairs, external wiring or connectors not supplied and authorized by SAMSUNG, or  
which damage this product or result in service problems; incorrect electrical line voltage, fluctuations and surges; customer  
adjustments and failure to follow operating instructions, cleaning, maintenance and environmental instructions that are covered  
and prescribed in the instruction book; product removal or reinstallation; reception problems and distortion related to noise,  
echo, interference or other signal transmission and delivery problems. SAMSUNG does not warrant uninterrupted or error-free  
operation of the product.  
THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED AND DESCRIBED ABOVE, AND NO WARRANTIES  
WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY  
OR FITNESS FOR A PARTICULAR PURPOSE, SHALL APPLY AFTER THE EXPRESS WARRANTY PERIODS STATED  
ABOVE, AND NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR CORPORATION WITH  
RESPECT TO THIS PRODUCT SHALL BE BINDING ON SAMSUNG. SAMSUNG SHALL NOT BE LIABLE FOR LOSS OF  
REVENUE OR PROFITS, FAILURE TO REALIZE SAVINGS OR OTHER BENEFITS, OR ANY OTHER SPECIAL, INCIDENTAL  
OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT, REGARDLESS  
OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF SAMSUNG HAS BEEN ADVISED OF THE  
POSSIBILITY OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST SAMSUNG BE GREATER IN AMOUNT  
THAN THE PURCHASE PRICE OF THE PRODUCT SOLD BY SAMSUNG AND CAUSING THE ALLEGED DAMAGE. WITHOUT  
LIMITING THE FOREGOING, PURCHASER ASSUMES ALL RISK AND LIABILITY FOR LOSS, DAMAGE OR INJURY TO  
PURCHASER AND PURCHASER’S PROPERTY AND TO OTHERS AND THEIR PROPERTY ARISING OUT OF THE USE,  
MISUSE OR INABILITY TO USE THIS PRODUCT SOLD BY SAMSUNG NOT CAUSED DIRECTLY BY THE NEGLIGENCE OF  
SAMSUNG. THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF  
THIS PRODUCT, IS NONTRANSFERABLE AND STATES YOUR EXCLUSIVE REMEDY.  
Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or  
consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal  
rights, and you may also have other rights which vary from state to state.  
To obtain warranty service, please contact SAMSUNG customer care center.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contact SAMSUNG WORLD WIDE  
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG  
customer care center.  
Area  
` North America  
Canada  
Mexico  
U.S.A  
Contact Centre  
Web Site  
Area  
Contact Centre   
Web Site  
ch_fr/ (French)  
0848 - SAMSUNG (7267864,  
CHF 0.08/min)  
Switzerland  
1-800-SAMSUNG (726-7864) www.samsung.com  
01-800-SAMSUNG (726-7864) www.samsung.com  
1-800-SAMSUNG (726-7864) www.samsung.com  
Lithuania  
Latvia  
Estonia  
` CIS  
Russia  
8-800-77777  
8000-7267  
800-7267  
` Latin America  
Argentine  
0800-333-3733  
0800-124-421  
4004-0000  
800-SAMSUNG (726-7864)  
00-1800-5077267  
800-7919267  
0-800-507-7267  
1-800-10-7267  
800-6225  
Brazil  
8-800-555-55-55  
8-800-555-555  
0-800-05-555  
Georgia  
Chile  
Armenia  
Azerbaijan  
Kazakhstan  
Uzbekistan  
Kyrgyzstan  
Tadjikistan  
Nicaragua  
Honduras  
Costa Rica  
Ecuador  
El Salvador  
Guatemala  
Jamaica  
088-55-55-555  
8-10-800-500-55-500  
8-10-800-500-55-500  
00-800-500-55-500  
8-10-800-500-55-500  
ua_ru  
1-800-299-0013  
1-800-234-7267  
800-7267  
Ukraine  
0-800-502-000  
Panama  
Puerto Rico  
1-800-682-3180  
Belarus  
Moldova  
` Asia Pacific  
Australia  
New Zealand  
810-800-500-55-500  
00-800-500-55-500  
Rep. Dominica 1-800-751-2676  
Trinidad &  
1-800-SAMSUNG (726-7864) www.samsung.com  
Tobago  
1300 362 603  
0800 SAMSUNG (0800 726 786) www.samsung.com  
Venezuela  
Colombia  
` Europe  
0-800-100-5303  
01-8000112112  
400-810-5858  
China  
010-6475 1880  
0810 - SAMSUNG  
Austria  
Belgium  
Czech  
(7267864, € 0.07/min)  
hk  
Hong Kong  
(852) 3698-4698  
be (Dutch)  
hk_en/  
02-201-24-18  
be_fr (French)  
3030 8282  
1800 110011  
India  
1800 3000 8282  
800 - SAMSUNG  
(800-726786)  
70 70 19 70  
030 - 6227 515  
01 48 63 00 00  
1800 266 8282  
0800-112-8888  
021-5699-7777  
Denmark  
Finland  
France  
Indonesia  
Japan  
Malaysia  
0120-327-527  
1800-88-9999  
01805 - SAMSUNG  
Germany  
1-800-10-SAMSUNG  
(726-7864)  
(726-7864 € 0,14/Min)  
Hungary  
Italia  
Luxemburg  
06-80-SAMSUNG (726-7864) www.samsung.com  
800-SAMSUNG (726-7864)  
261 03 710  
1-800-3-SAMSUNG  
(726-7864)  
Philippines  
1-800-8-SAMSUNG  
(726-7864)  
02-5805777  
0900-SAMSUNG  
Netherlands  
Norway  
Singapore  
Thailand  
1800-SAMSUNG (726-7864) www.samsung.com  
1800-29-3232  
02-689-3232  
(0900-7267864) (€ 0,10/Min)  
815-56 480  
0 801 1SAMSUNG (172678)  
022-607-93-33  
80820-SAMSUNG (726-7864) www.samsung.com  
0800-SAMSUNG (726-7864) www.samsung.com  
Poland  
Taiwan  
Vietnam  
` Middle East & Africa  
0800-329-999  
1 800 588 889  
Portugal  
Slovakia  
Turkey  
South Africa  
U.A.E  
Bahrain  
Jordan  
444 77 11  
902 - 1 - SAMSUNG  
(902 172 678)  
0771 726 7864 (SAMSUNG) www.samsung.com  
Spain  
0860-SAMSUNG (726-7864) www.samsung.com  
800-SAMSUNG (726-7864)  
8000-4726  
Sweden  
U.K  
Eire  
0845 SAMSUNG (7267864)  
0818 717100  
800-22273  
Download from Www.Somanuals.com. All Manuals Search And Download.  
QUESTIONS OR COMMENTS?  
COUNTRY  
CALL  
OR VISIT US ONLINE AT  
WRITE  
Samsung Electronics America, Inc.  
85 Challenger Road Ridgefield Park,  
NJ 07660-2112  
1-800-SAMSUNG  
(7267864)  
IN THE US  
Code No. AH68-02279Y  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Radio Shack Telephone ET 3222 User Guide
RCA Flat Panel Television R52WM24 User Guide
RCA Stereo System ANT2050X User Guide
Renesas Power Supply RD74LVC14B User Guide
Ricoh Printer FAX4000L User Guide
Rosewill Corded Headset RHTS 8206 User Guide
Samsung Digital Camera EC DV300FBPB User Guide
Samsung DVD Player 525p User Guide
Samsung Printer 3710 User Guide
Sceptre Technologies Flat Panel Television SCEPTRE X425 HDTV User Guide