LCD TV
LA32R8
LA37R8
Contact SAMSUNG WORLD-WIDE
LA40R8
If you have any questions or comments relating to Samsung products,
please contact the SAMSUNG customer care centre.
LA40M8
LA46M8
LA52M8
Country
AUSTRALIA
Customer Care Centre
1300 362 603
Web Site
CHINA
800-810-5858 , 010- 6475 1880
3698 - 4698
HONG KONG
INDIA
3030 8282
1800 1100 11
INDONESIA
JAPAN
0800-112-8888
0120-327-527
MALAYSIA
PHILIPPINES
SINGAPORE
THAILAND
1800-88-9999
1800-10-SAMSUNG (7267864)
1800-SAMSUNG (7267864)
1800-29-3232
Owner’s Instructions
Before operating the unit,
please read this manual thoroughly,
and retain it for future reference.
02-689-3232
TAIWAN
0800-329-999
VIETNAM
SOUTH AFRICA
U.A.E
1 800 588 889
0860 7267864 (SAMSUNG)
800SAMSUNG (7267864)
8000-4726
ON-SCREEN MENUS
PC DISPLAY
PICTURE IN PICTURE (PIP)
TELETEXT
Record your Model and Serial number here for future reference.
▪ Model _______________ ▪ Serial No. _______________
BN68-01199A-01
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions When Displaying a Still Image
A still image may cause permanent damage to the TV screen.
•
Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image retention.
This image retention is also known as "screen burn".
To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image.
Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right and center
of the screen caused by the difference of light emission on the screen.
•
Playing a DVD or a game console may cause a similar effect to the screen.
Damages caused by the above effect are not covered by the Warranty.
•
Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images.
To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images.
© 2007 Samsung Electronics Co., Ltd. All rights reserved.
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
ConnECting and PrEParing Your tV
SEtting thE timE
List of Parts ........................................................ 2
Installing the Stand............................................. 2
Installing the Wall Mount Kit............................... 2
Viewing the Control Panel.................................. 3
Viewing the Connection Panel ........................... 4
Viewing the Remote Control............................... 7
Installing Batteries in the Remote Control.......... 8
Switching On and Off ......................................... 8
Placing Your Television in Standby Mode........... 8
Plug & Play......................................................... 9
Setting and Displaying the Current Time.......... 25
Setting the Sleep Timer.................................... 25
Switching the Television On and Off
Automatically.................................................... 26
FunCtion dESCriPtion
Choosing Your Language................................. 27
Using Game Mode ........................................... 27
Setting the Blue Screen Mode / Selecting the
Melody ............................................................. 28
Setting the Home Theatre PC .......................... 28
Setting the Light Effect (LA32R8, LA37R8,
SEtting thE ChannElS
Storing Channels Automatically ....................... 10
Storing Channels Manually ...............................11
Setting the Channel Lists ................................. 12
Activating the Child Lock.................................. 12
Sorting the Stored Channels............................ 13
Assigning Channels Names............................. 13
Fine Tuning Channel Reception....................... 14
LA40R8)........................................................... 29
Using the Energy Saving Feature .................... 30
HDMI Black Level............................................. 30
Selecting the Source........................................ 31
Editing the Input Source Names ...................... 31
uSing thE tElEtExt FEaturE
Teletext Decoder .............................................. 32
Displaying the Teletext Information .................. 32
Selecting a Specific Teletext Page................... 33
Using Fastext to Select a Teletext Page........... 33
Setting Up Your Remote Control...................... 34
Remote Control Codes..................................... 36
SEtting thE PiCturE
Changing the Picture Standard........................ 14
Adjusting the Custom Picture........................... 15
Changing the Colour Tone................................ 15
Configuring Detailed Settings on the Picture ... 16
Activating Backlight.......................................... 17
Changing the Picture Size................................ 17
Freezing the Current Picture............................ 18
Digital NR / Active Colour / DNIe / Movie Plus. 18
Resetting the Picture Settings to the Factory
SEtting thE PC
Setting up Your PC Software
(Based on Windows XP) .................................. 39
Display Modes.................................................. 39
Setting the PC.................................................. 41
Defaults............................................................ 19
Viewing the Picture In Picture (PIP) ................. 19
about anYnEt+
SEtting thE Sound
What is Anynet+? ............................................. 42
Connecting Anynet+ Devices ........................... 42
Setting Up Anynet+ ......................................... 43
Scanning and Switching between Anynet+
Devices ........................................................... 43
Recording ........................................................ 44
Listening through a Receiver .......................... 45
Check Points before Requesting Service ........ 45
Changing the Sound Standard......................... 21
Adjusting the Sound Settings........................... 21
Setting the TruSurround XT (SRS TS XT)........ 22
Adjusting the Volume Automatically ................. 22
Selecting the Internal Mute .............................. 23
Listening to the Sound of the Sub Picture........ 23
Resetting the Sound Settings to the Factory
Defaults............................................................ 24
Connecting Headphones.................................. 24
Selecting the Sound Mode............................... 24
rECommEndationS For uSE
Wall-Mount Adjustment (LA40R8, LA40M8,
LA46M8, LA52M8)(Sold separately)................ 46
Using the Anti-Theft Kensington Lock.............. 47
Troubleshooting: Before Contacting
Service Personnel............................................ 47
Technical and Environmental Specifications ... 48
Symbol
Press
Important
Note
One-Touch
Button
English - ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
list of Parts
Please make sure the following items are included with your LCD TV.
If any items are missing, contact your dealer.
M4 X L16
Remote Control
Stand Screw
& Batteries
(AAA x 2)
Power Cord
Cover-Bottom
Stand
Cleaning Cloth
Registration Card
X 4
Owner’s Instructions
Warranty card
Safety Guide
Warranty card / Safety Guide / Registration Cards (Not available in all locations)
The stand and stand screw may not be included depending on the model.
installing the Stand
< 3 >
< ꢁ >
ꢀ. Place the TV faced down on a soft cloth or cushion on a table.
ꢁ. Put the stand into the hole at the bottom of the TV.
3. Insert screw into the hole indicated and tighten.
The stand is installed for models with the screen size of 37 inch and above.
installing the Wall mount Kit
Wall mount items (sold separately) allow you to mount
the TV on the wall.
For detailed information on installing the wall mount,
see the instructions provided with the Wall Mount items.
Contact a technician for assistance when installing the
wall mounted bracket.
Samsung Electronics is not responsible for any damage
to the product or injury to yourself or others
if you elect to install the TV on your own.
Remove the stand and cover the bottom hole with a
cap and fasten with two screws.
English - ꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing the Control Panel
(LA32R8, LA37R8, LA40R8 )
1
2
3
4
5
Front Panel buttons
Touch the right side of
each button to operate.
6
(LA40M8, LA46M8, LA52M8)
1
2
3
4
5
6
The product colour and shape may vary depending on the model.
1
SourCE
4
Ch
Toggles between all the available input
sources (TV, AV.1, AV.2, S-Video, Component1,
Component2, PC, HDMI1, HDMI2, HDMI3).
In the on-screen menu, use this button as you
use the EntEr/oK button on the remote
control.
Press to change channels.
In the on-screen menu, use the Ch
buttons as you use the ▲ and ▼ buttons on
the remote control.
(Without the Remote Control, you can turn on
the TV by using the Channel buttons.)
2
3
mEnu
5
(PoWEr)
Press to turn the TV on and off.
Power indicator
Blinks and turns off when the power is on and
lights up in stand-by mode.
remote Control Sensor
Aim the remote control towards this spot on
the TV.
Press to see an on-screen menu of your TV’s
features.
+ Vol -
Press to increase or decrease the volume.
In the on-screen menu, use the + VOL -
buttons as you use the
the remote control.
◄
and
►
buttons on
6
Speakers
English - 3
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing the Connection Panel
4
1
2
3
3
5
Power Input
7
0
9
8
6
Whenever you connect an external device to your TV, make sure that power on the unit is turned off.
When connecting an external device, match the colour of the connection terminal to the cable.
1 Connecting External a/V devices (aV in ꢀ)
- Connect RCA cable to an appropriate external A/V device such as VCR, DVD or Camcorder.
- Connect RCA audio cables to “R - AUDIO - L” on the rear of your set and the other ends to
corresponding audio out connectors on the A/V device.
2 Connecting audio
- Connect RCA audio cables to “R - AUDIO - L” on the rear of your set and the other ends to
corresponding audio in connectors on the Amplifier or DVD Home Theater.
English - ꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
3 hdmi in ꢀ, hdmi in ꢁ, hdmi in 3
- Supports connections between HDMI-connection-enabled AV devices (Set-Top Boxes, DVD players)
- No additional Audio connection is needed for an HDMI to HDMI connection.
What is HDMI?
- "High Definition Multimedia interface" allows the transmission of high definition digital video
data and multiple channels of digital audio (5. 1 channels).
- The HDMI/DVI terminal supports DVI connection to an extended device with the appropriate cable
(not supplied). The difference between HDMI and DVI is that the HDMI device is smaller in size,
has the HDCP (High Bandwidth Digital Copy Protection) coding feature installed, and supports
multi - channel digital audio.
dVi in(hdmi ꢁ)(audio r/l)
- When connecting this product via HDMI or DVI to a Set Top Box, DVD Player or Games Console
etc, make sure that it has been set to a compatible video output mode as shown in the table
below. Failure to observe this may result in picture distortion, image breakup or no picture.
- When using an HDMI/DVI cable connection, it is only possible from the HDMI 2 IN terminal.
You should use the DVI-to-HDMI cable or DVI-HDMI Adapter for the connection, and the
“R - AUDIO - L” terminal on DVI for sound output.
Supported modes for HDMI/DVI and Component
la3ꢁr8, la37r8, laꢂ0r8 models
480i
X
480p
X
576i
X
576p
O
720p
O
1080i
O
HDMI/DVI 50Hz
HDMI/DVI 60Hz
Component
X
O
O
O
X
O
X
O
O
O
O
O
laꢂ0m8, laꢂ6m8, laꢃꢁm8 models
480i
X
480p
X
576i
X
576p
O
720p
O
1080i
O
1080p
O
HDMI/DVI 50Hz
HDMI/DVI 60Hz
Component
X
O
O
O
X
O
X
O
O
O
O
O
O
O
The external devices that support lower versioned HDMI mode may not implement sound output
for the TV with the latest HDMI version (HDMI 1.3). In this case, connect to HDMI IN 2 and DVI IN
(HDMI 2) "R - AUDIO - L" on the back panel of the TV.
Part of lower versioned HDMI cables may cause annoying flickers or no screen display.
In this case use the cable that supports the latest HDMI version (HDMI 1.3).
4
Connecting an aerial or Cable television network
To view television channels correctly, a signal must be received by the set from one of the following
sources:
- An outdoor aerial / A cable television network / A satellite network
6 Connecting External a/V devices
- Connect RCA or S-VIDEO cable to an appropriate external A/V device such as VCR, DVD or
Camcorder.
- Connect RCA audio cables to "R - AUDIO - L" on the rear of your set and the other ends to corre
sponding audio out connectors on the A/V device.
- Headphone may be connected to the headphone output (5) on the rear of your set. While the
head phone is connected, the sound from the built-in speakers will be disabled.
7 Connecting Computer
- Connect the D- Sub cable (optional) to "PC (PC IN)" on the rear of your set and the other end to
the Video Card of your computer.
- Connect the stereo audio cable (optional) to "AUDIO (PC IN)" on the rear of your set and the other
end to "Audio Out" of the sound card on your computer.
8 SErViCE
- Service connection for qualified service engineer.
- Auto Wall-Mount (Refer to page 46)
English - ꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
9 Connecting Component devices (dVd)
- Connect component video cables (optional) to component connector ("PR", "PB", "Y") on the rear of
your set and the other ends to corresponding component video out connectors on the DVD.
- If you wish to connect both the Set-Top Box and (or DVD), you should connect the Set-Top Box to
the (or DVD) and connect the (or DVD) to component connector ("PR", "PB", "Y") on your set.
- The PR, PB and Y connectors on your component devices (DVD) are sometimes labeled Y, B-Y and
R-Y or Y, Cb and Cr.
- Connect RCA audio cables (optional) to "R - AUDIO - L" on the rear of your set and the other ends to
corresponding audio out connectors on the DVD.
- This LCD TV displays its optimum picture resolution in 720p mode.
- This LCD TV displays its maximum picture resolution in 1080i mode.
0 Kensington lock
- The Kensington lock (optional) is a device used to physically fix the system when used in a public
place.
- If you want to use a locking device, contact the dealer where you purchased the TV.
- The place of the Kensington Lock may be different depending on its model.
English - 6
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing the remote Control
1 Selects a target device to be a P : Next channel
controlled by the Samsung
remote control (TV, DVD,
STB, CABLE, VCR)
P
: Previous channel
b Exit the OSD
(Refer to page 36~38)
c Control the cursor in the
menu
2 Television Standby button
d Use to see information on
3 Number buttons for direct
channel access
the current broadcast
e Runs the Anynet view
functions and sets up Anynet
devices. .
4
One/Two-digit channel
selection
5 It display "Channel List"
f Picture size selection
on the screen.
g PIP:Picture-In-Picture On / Off
SOURCE: Input source
selection
6 Selects the TV mode directly
7 VCR/DVD Functions
Rewind, Stop, Play/Pause,
Fast/Forward
POSITION: PIP position
selection
P
P
: Next channel
: Previous channel
8
Volume increase
Volume decrease
h When your remote does not
work, change the batteries
and press the "RESET"
button for 2-3 seconds before
use.
9 Temporary sound switch-off
0 Menu display and
change confirmation
! Returns to the previous
menu.
teletext Functions
8 Exit from the teletext display
0 Teletext index
# Sound effect selection
$ SRS TS XT selection
@ Alternately select Teletext,
%
Adjusts 5 separate devices
Double, or Mix.
- TV, DVD, STB, CABLE, or
VCR
.
& Teletext mode selection
(LIST/FLOF)
^ When pressing this button, a
number of buttons on the
remote control (e.g. Selects
a target device, volume,
channel and MUTE buttons)
light up for a few seconds
and then turn off to save
power. This function is to
conveniently use the
( Teletext sub page
b P : Teletext next page
P
: Teletext previous page
c Teletext cancel
d Teletext reveal
f Fastext topic selection
remote control at night or
when dark.
g
g
g
Teletext Hold
PIP:
Teletext Store
SOURCE:
Teletext size
POSITION:
selection
& Available source selection
* Previous channel
( Automatic Power-off
) Records for Live
Broadcasting
(Anynet+ function only)
(Refer to page 43)
The performance of the remote control may be affected by bright light.
This is a special remote control for the visually impaired, and has Braille points on the Power,
Channel, STOP, PALY/PAUSE and Volume buttons.
English - 7
Download from Www.Somanuals.com. All Manuals Search And Download.
installing batteries in the remote Control
ꢀ. Lift the cover at the back of the remote control upward as shown in the
figure.
ꢁ. Install two AAA size batteries.
Make sure to match the "+" and "–" ends of the batteries with the
diagram inside the compartment.
3. Replace the cover.
Remove the batteries and store them in a cool, dry place if you won’t be
using the remote control for a long time. The remote control can be used
up to about 23 feet from the TV.
(Assuming typical TV usage, the batteries last for about one year.)
If the remote control doesn’t work, check the following:
ꢀ. Is the TV power on?
ꢁ. Are the plus and minus ends of the batteries reversed?
3. Are the batteries drained?
ꢂ. Is there a power outage, or is the power cord unplugged?
ꢃ. Is there a special fluorescent light or neon sign nearby?
Switching on and off
the mains lead is attached to the rear of your set.
ꢀ. Plug the mains lead into an appropriate socket.
The standby indicator lights up on the front of the set.
ꢁ. Press the button on the front of the set.
You also can press the PoWEr
button or the tV button on the remote control to turn
the TV on.
The programme that you were watching last is reselected automatically.
Press the numeric button (0~9) or channel up/down ( / ) button on the remote control or
Ch button on the right side of the set.
3.
When you switch the set on for the very first time, you will be asked to choose language in
which the menus are to be displayed.
ꢂ. To switch your set off, press the PoWEr button again.
Placing Your television in Standby mode
Your set can be placed in standby mode in order to reduce the power consumption. the standby
mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).
ꢀ. Press the PoWEr button on the remote control.
The screen is turned off and a red standby indicator appears on the front of your set.
ꢁ. To switch your set back on, simply press the PoWEr , numeric buttons (0~9), tV button or
channel up/down ( / ) button again.
Do not leave your set in standby mode for long periods of time
(when you are away on holiday, for example).
It is best to unplug the set from the mains and aerial.
English - 8
Download from Www.Somanuals.com. All Manuals Search And Download.
Plug & Play
When the tV is initially powered on, several basic settings
proceed automatically and subsequently. the following
settings are available.
Plug & Play
Start Plug & Play.
ꢀ. Press the PoWEr button on the remote control.
oK
The message "Start Plug & Play" is displayed with "OK" selected.
Enter
Exit
ꢁ. Select the appropriate language by pressing the ▲ or ▼ button.
Press the EntEr/oK button to confirm your choice.
3. Press the
◄
or
►
buttons to select “Shop” or “Home”, then the EntEr/oK button.
We recommend setting the TV to Home mode for the best picture in your home envronment.
Shop mode is only intended for use in retail environments.
If the unit is accidentally set to Shop mode and you want to return to Dynamic (Home) mode,
press the Volume button and then hold down the mEnu button for five seconds on the side
panel of the TV.
ꢂ. The message "Check antenna input." is displayed with "OK" selected.
Press the EntEr/oK button.
Please check that the antenna cable is connected correctly.
ꢃ. Select the appropriate country by pressing the ▲ or ▼ button.
Press the EntEr/oK button to confirm your choice.
6. The "Auto Store" menu is displayed with the "Start" selected. Press the EntEr/oK button.
The channel search will start and end automatically.
After all the available channels are stored, the "Clock Set" menu appears.
Press the EntEr/oK button at any time to interrupt the memorization process.
7. Press the EntEr/oK button.
Select the "Month" , "Day" , "Year", "Hour", "Minute", or "am/pm" by pressing the
Set the "Month" , "Day" , "Year", "Hour", "Minute" or, "am/pm" by pressing the
◄
or
or
▼
►
button.
button..
▲
You can also set the hour and minute by pressing the number buttons on the remote control.
When you have finished, press the EntEr button
The message “Enjoy your viewing.” is displayed.
8. Press the EntEr/oK button to confirm your setting.
language: Select your language.
area : Select your country.
auto Store: Automatically scans for and stores channels available in the local area.
Clock Set: Sets the current time for the TV clock.
English - 9
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup
if you want to reset this feature...
tV
Plug & Play
language
time
game mode
blue Screen
melody
ꢀ. Press the mEnu button to display the menu.
: English
Press the
▲
or
▼
button to select "Setup", then press the
:
:
:
off
off
off
EntEr/oK button.
PC
ꢁ. Press the EntEr/oK button again, to select "Plug & Play".
home theatre PC
:
off
smore
3. The message to "Start Plug & Play" is displayed.
(On page 9)
move
Enter
return
Plug & Play
Start Plug & Play.
oK
Enter
return
Channel
tV
- Storing Channels Automatically
- Storing Channels Manually
area
auto Store
manual Store
:
asia/W.Europe
Channel manager
Sort
name
Fine tune
move
Enter
return
Storing Channels automatically
You can scan for the frequency ranges available to you (and availability depends on your country).
automatically allocated programme numbers may not correspond to actual or desired programme
numbers. however, you can sort numbers manually and clear any channels you do not wish to watch.
ꢀ. Press the mEnu button to display the menu.
Press the
▲
or
▼
button to select "Channel", then press the EntEr/oK button.
ꢁ. Press the EntEr/oK button to select “Area”.
3. Select the appropriate area by pressing the
▲
or
▼
button.
Press the EntEr/oK button to confirm your choice.
ꢂ. Press the or button to select “Auto Store" then press the EntEr/oK button.
▲
▼
ꢃ. Press the EntEr/oK button.
The TV will begin memorizing all of the available channels.
Press the EntEr/oK button at any time to interrupt the memorization process and return to the
"Channel" menu.
6. After all the available channels are stored, the "Sort" menu appears.
English - ꢀ0
Download from Www.Somanuals.com. All Manuals Search And Download.
Storing Channels manually
You can store up to ꢀ00 channels, including those received via cable networks.
When storing channels manually, you can choose:
Whether or not to store each of the channels found.
the programme number of each stored channel which you wish to identify.
ꢀ. Press the mEnu button to display the menu.
Press the
▲
or
▼
button to select "Channel", then press the EntEr/oK button.
ꢁ. Press the
▲
or
▼
button to select "Manual Store", then press the EntEr/oK button.
3. Press the EntEr/oK button to select "Programme".
ꢂ. To assign a programme number to a channel, find the correct number by pressing the
▲
or
▼
button and then press the EntEr/oK button.
You can also set a programme number by pressing number buttons on the remote control.
ꢃ. Press the
▲
or
▼
button to select "Colour System", then press the EntEr/oK button.
6. Select the colour standard required by pressing the
▲
or
▼
button then, press the EntEr/oK
button.
7. Press the
▲
or
▼
button to select "Sound System", then press the EntEr/oK button.
8. Select the sound standard required by pressing the
▲
or
▼
button, then press the EntEr/oK
button.
If there is an abnormal sound or no sound, re-select the sound system required.
9. If you know the number of the channel to be stored, press the
Press the EntEr/oK button. Select C (Air channel) or S (Cable channel) by pressing the
button. Press the button to select channel.
Select the required number by pressing the button and then press the EntEr/oK button.
▲
or
▼
button to select "Channel".
▲
or
▼
►
▲
or
▼
Channel mode: P (Programme mode), C (Air channel mode), S (Cable channel mode)
You can also set a channel number by pressing number buttons on the remote control.
ꢀ0. If you do not know the channel numbers, press the
▲
or
▲
▼
or
button to select "Search".
button and then press the
Press the EntEr/oK button. Search by pressing the
▼
EntEr/oK button.
ꢀꢀ. Press the
▲
or
▼
button to select "Store". Press the EntEr/oK button to select "OK".
ꢀꢁ. Repeat steps 3 to ꢀꢀ for each channel to be stored.
Programme: Selects a program number for the channel.
Colour System: Sets the colour supporting system.
Sound System: Sets the sound supporting system.
Channel: Selects a channel.
Search: Scans for the frequency value for the channel.
Store: Saves your settings.
English - ꢀꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Channel lists
Set the channels according to your preference.
Channel list
You can easily delete, add, or lock the channel you want.
P
ꢀ
C3
ꢀ / ꢀ0
ꢀ. Press the mEnu button to display the menu.
Prog.
Press the
EntEr/oK button.
▲
or
▼
button to select "Channel", then press the
button to select "Channel Manager",
0
ꢀ
ꢁ
3
ꢂ
ꢃ
C--
C3
ꢁ. Press the or
▲
▼
bbC ꢀ
C7ꢂ
C7ꢃ
C76
then press the EntEr/oK button.
3. Press the EntEr/oK button again, to select "Channel List".
ꢂ. Press the
►
▲
button to select " " line.
6
7
8
S3
Sꢂ
S6
ꢃ. Press the
or ▼ button to select the undesired channel,
then press the EntEr/oK button to cancel.
6. Repeat steps 5 for each channel to be selected or canceled
7. Press the Exit button to exit.
9
S7
add
lock
move
Enter
return
"
" is active when "Child Lock" is selected to "On".
Page
You can select these options by simply pressing the Ch liSt
button on the remote control.
activating the Child lock
this feature allows you to prevent unauthorized users, such
as children, from watching unsuitable programmes by muting
out video and audio.
Child lock cannot be released using the buttons on the side.
only the remote control can release the Child lock setting,
so keep the remote control away from children.
Channel manager
Channel list
Child lock
tV
:
off
on
ꢀ. Press the mEnu button to display the menu.
Press the
EntEr/oK button.
▲
or
▼
button to select "Channel", then press the
move
Enter
return
Channel list
ꢁ. Press the or
▲
▼
button to select "Channel Manager",
then press the EntEr/oK button.
3. Press the or button to select "Child Lock", then press
the EntEr/oK button.
ꢂ. Press the or
EntEr/oK button.
ꢃ. Press the or
P
ꢁ
Cꢂ
bbCꢀ
ꢀ / ꢀ0
▲
▼
Prog.
0
ꢀ
ꢁ
3
ꢂ
ꢃ
C--
▲
▼
button to select "On" or "Off". Press the
button to select "Channel List",
C3
bbC ꢀ
C7ꢂ
C7ꢃ
C76
▲
▼
then press the EntEr/oK button.
6. Press the
►
▲
button to select " " line.
or button to select the channels you want to
6
7
8
S3
Sꢂ
S6
7. Press the
▼
lock, then press the EntEr/oK button.
8. Repeat steps 7 for each channel to be locked or unlocked.
9. Press the Exit button to exit.
9
S7
add
lock
move
Enter
return
Select "On" or "Off" in "Child Lock" to easily turn the channels
which selected on " " to be active or inactive.
Page
English - ꢀꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Sorting the Stored Channels
Channel
asia/W.Europe
auto Store
manual Store
Channel manager
Sort
tV
You can exchange the numbers of two channels, in order to:
area
:
modify the numeric order in which the channels have
been automatically stored.
give easily remembered numbers to the channels
that you watch most often.
name
Fine tune
ꢀ. Press the mEnu button to display the menu. Press the
▲
or
▼
button to select "Channel", then press the EntEr/oK button.
move
Enter
return
ꢁ. Press the or button to select "Sort", then press the
EntEr/oK button.
3. Select the channel number that you wish to change by press
▲
▼
tV
Sort
Prog.
Ch.
name
r
0
ꢀ
ꢁ
3
ꢂ
C--
ing the
button.
▲
or
▼
button repeatedly. Press the EntEr/oK
Cꢁ3
Cꢀ6
C3
The selected channel number and name are moved to
right side.
Sꢀ
r
ꢂ. Press the
▲
or
▼
button to move to the position in which you
move
Enter
return
would like to change and then press the EntEr/oK button.
The selected channel is exchanged with the one
previously stored to the chosen number.
ꢃ. Repeat steps 3 to ꢂ for another channel to be sorted.
6. Press the Exit button to exit.
assigning Channels names
Channel names will be assigned automatically when channel
information is broadcast. these names can be changed,
allowing you to assign new names.
tV
Channel
area
:
asia/W.Europe
auto Store
manual Store
Channel manager
Sort
ꢀ. Press the mEnu button to display the menu.
Press the
▲
or
▼
button to select "Channel", then press the
name
Fine tune
EntEr/oK button.
ꢁ. Press the or
EntEr/oK button.
3. If necessary, select the channel to be assigned to a new
▲
▼
button to select "Name", then press the
move
Enter
return
tV
name
name by pressing the
button.
▲
or
▼
button. Press the EntEr/oK
Prog.
Ch.
name
r
0
ꢀ
ꢁ
3
ꢂ
C--
-----
-----
-----
-----
-----
The selection bar is displayed around the name box.
Cꢁ3
Cꢀ6
C3
ꢂ.
to...
then...
Sꢀ
r
Select a letter, number or symbol
Move on the next letter
Move back the previous letter
Confirm the name
Press the ▲ or ▼ button
Press the ► button
Press the ◄ button
Press the EntEr/oK button
move
Enter
return
ꢀ
The characters available are : Letters of the alphabet
(A~Z) / Numbers (0~9) / Special characters ( -, space)
ꢃ. Repeat steps 3 to ꢂ for each channel to be assigned to a new
name.
6. Press the Exit button to exit.
English - ꢀ3
Download from Www.Somanuals.com. All Manuals Search And Download.
Fine tuning Channel reception
Channel
asia/W.Europe
auto Store
manual Store
Channel manager
Sort
tV
use fine tuning to manually adjust a particular channel for
area
:
optimal reception.
ꢀ. Use the number buttons to directly select the channel that
you want to fine tune.
name
Fine tune
ꢁ. Press the mEnu button to display the menu.
Press the
▲
or
▼
button to select "Channel", then press the
EntEr/oK button.
move
Enter
return
3. Press the or
▲
▼
button to select "Fine Tune", then press
the EntEr/oK button.
Fine tune
ꢂ. Press the
◄
or
►
button to adjust the fine tuning.
Press the EntEr/oK button.
P ꢀ
ꢃ. Press the Exit button to exit.
0
Fine tuned channels that have been saved are marked with
an asterisk "*" on the right-hand side of the channel number
in the channel banner. And the channel number turns red.
reset
adjust
Save
return
To reset the fine-tuning, select "Reset" by pressing the
▲
or
▼
button and then press the EntEr/oK button.
Changing the Picture Standard
You can select the type of picture which best corresponds to
tV
Picture
: dynamic
your viewing requirements.
mode
Contrast
brightness
Sharpness
Colour
tint
Colour tone
detailed Settings
backlight
smore
ꢀ00
ꢂꢃ
7ꢃ
ꢃꢃ
rꢃ0
ꢀ. Press the mEnu button to display the menu.
Press the EntEr/oK button to select "Picture".
gꢃ0
ꢁ. Press the EntEr/oK button again, to select "Mode".
: Coolꢀ
: ꢀ0
3. Press the
▲
or
▼
button to select the desired picture effect.
Press the EntEr/oK button.
move
Enter
return
ꢂ. Press the Exit button to exit.
tV
Picture
: d
mode
dynamic
Standard
movie
dynamic: Selects the picture for high-definition in a bright
Contrast
brightness
Sharpness
Colour
0
7ꢃ
room.
Standard: Selects the picture for optimum display in a
ꢃꢃ
rꢃ0
normal environment.
tint
gꢃ0
Colour tone
detailed Settings
backlight
: Coolꢀ
movie: Selects the picture for comfortable display in a
dark room.
: ꢀ0
smore
The Picture mode must be adjusted separately for each input
source.
move
Enter
return
You can return to the factory defaults picture settings by
selecting the "Reset".
(Refer to "Resetting the Picture Settings to the Factory
Defaults" on page 19)
You can also press the
P.modE button on the remote
control to select one of the
picture settings.
English - ꢀꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Custom Picture
TV
Picture
: Dynamic
Your set has several settings which allow you to control
picture quality.
Mode
Contrast
Brightness
Sharpness
Colour
100
45
75
55
R50
1. To select the desired picture effect, follow the
"Changing the Picture Standard" instructions number 1 to 3.
Tint
Colour Tone
Detailed Settings
Backlight
sMore
G50
2. Press the
▲
or
▼
button to select a particular item. Press the
: Cool1
: 10
ENTER/OK button.
3. Press the or
◄
►
button to decrease or increase the value of
a particular item. Press the ENTER/OK button.
Move
Enter
Return
4. Press the EXIT button to exit.
Contrast: Adjusts the lightness and darkness between objects and the background.
Brightness: Adjusts the brightness of the whole screen.
Sharpness: Adjusts the outline of objects to either sharpen them or make them more dull.
Colour: Adjusts the colours, making them lighter or darker.
Tint : Adjusts the colour of objects, making them more red or green for a more natural look.
The adjusted values are stored according to the selected Picture mode.
In PC Mode, Only "Contrast", "Brightness" can be adjusted.
Changing the Colour Tone
TV
Picture
: Dynamic
You can select the most comfortable colour tone to your
eyes.
Mode
Contrast
Brightness
Sharpness
Colour
Tint
Colour Tone
Detailed Settings
Backlight
sMore
100
45
75
55
R50
1. To select the desired picture effect, follow the
"Changing the Picture Standard" instructions number 1 to 3.
(on page 14)
G50
: Cool1
: 10
2. Press the
▲
or
▼
button to select "Colour Tone", then press
the ENTER/OK button.
Move
Enter
Return
3. Press the
▲
or
▼
button to select the desired colour tone
setting. Press the ENTER/OK button.
TV
Picture
: Dynamic
Mode
4. Press the EXIT button to exit
Contrast
Brightness
Sharpness
Colour
100
45
75
55
R50
Cool2: Makes the colour temperature bluer than "Cool1"
menu.
Tint
G50
Cool 2
:
Colour Tone
Detailed Settings
Backlight
Cool 1
Cool1: Makes whites bluish.
Normal: Keeps whites white.
Warm1: Makes whites reddish.
Warm2: Makes the colour temperature redder than
"Warm1" menu.
Normal
Warm 1
Warm 2
:
sMore
Move
Enter
Return
The adjusted values are stored according to the selected Picture mode.
When the picture mode is set to Dynamic or Standard, Warm1 and Warm2 cannot be selected.
English - 15
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuring Detailed Settings on the Picture
tV
Picture
: movie
You can set detailed picture settings.
mode
Contrast
brightness
Sharpness
Colour
tint
Colour tone
ꢀ00
ꢂꢃ
7ꢃ
ꢃꢃ
rꢃ0
ꢀ
ꢁ
3
Press the mEnu button to display the menu.
Press the EntEr/oK button, to select "Picture".
gꢃ0
Press the ▲ or ▼ button to select Detailed Settings, then
press the EntEr/oK button.
: Coolꢀ
: ꢀ0
detailed Settings
backlight
smore
ꢂ
Select the required option by pressing the ▲ or ▼ button,
then press the EntEr/oK button.
move
Enter
return
Available options: Black Adjust, Dynamic Contrast, Gamma,
White Balance, My Colour Control, Edge Enhancement,
Colour Space.
tV
detailed Settings
black adjust
dynamic Contrast
gamma
:
:
off
off
: 0
White balance
my Colour Control
Edge Enhancement : off
ꢃ
6
When you are satisfied with your setting, press the
EntEr/oK button.
Colour Space
: auto
Press the Exit button to exit.
xvYCC
:
off
Detailed Settings is available in Standard or Movie mode.
If DNIe is Off, the Detailed Settings cannot be selected
when the Picture mode is in Standard mode.
move
Enter
return
black adjust: off/low/medium/high
You can directly select the black level on the screen to adjust the screen depth.
dynamic Contrast: off/low/medium/high
You can adjust the screen contrast so that the optimal contrast is provided.
gamma: -3 ~ 3
You can adjust the middle brightness of pictures.
Press the ◄ or ► button until you reach the optimal setting.
White balance: r offset/g offset/b offset/r gain/g gain/b gain/reset
You can adjust the color temperature for more natural picture colors.
R Offset/G Offset/B Offset/R Gain/G Gain/B Gain: Changing the adjustment value will refresh the
adjusted screen.
Select the required option by pressing the ▲ or ▼ button, then press the EntEr/oK button.
Press the ◄ or ► button until you reach the optimal setting.
Reset: The previously adjusted white balance will be reset to the factory defaults.
my Colour Control: Pink/green/blue/White/reset
This setting can be adjusted to suit your personal preferences.
Pink/Green/Blue/White: Changing the adjustment value will refresh the adjusted screen.
Select the required option by pressing the ▲ or ▼ button, then press the EntEr/oK button.
Press the ◄ or ► button until you reach the optimal setting.
Reset: The previously adjusted white balance will be reset to the factory defaults.
Edge Enhancement: on/off
You can emphasize object boundaries.
Colour Space: auto/Wide
You can set the colour reproduction space for the input signal to Auto or Wide.
xvYCC : on/off (laꢂ0m8, laꢂ6m8, laꢃꢁm8)
Setting the xvYCC mode to On increases detail and color space when watching movies from an
external device (ie. DVD player) connected to the HDMI or Component IN jacks. You must set the
Picture Mode to Movie to enjoy this feature.
External devices with an older HDMI version may not implement color space for TVs with the
latest HDMI version (HDMI 1.3).
English - ꢀ6
Download from Www.Somanuals.com. All Manuals Search And Download.
activating backlight
You can adjust the screen brightness by adjusting the LCD
tV
Picture
: dynamic
mode
backlight brightness. (0~10)
Contrast
brightness
Sharpness
Colour
tint
Colour tone
detailed Settings
backlight
smore
ꢀ00
ꢂꢃ
7ꢃ
ꢃꢃ
rꢃ0
ꢀ. To select the desired picture effect, follow the
"Changing the Picture Standard" instructions number 1 to 3.
(On page 14)
gꢃ0
: Coolꢀ
: ꢀ0
ꢁ. Press the ▲ or ▼ button to select “Backlight”, then press the
EntEr/oK button.
move
Enter
return
3. Press the ◄ or ► button to decrease or increase the value of
a particular item.
ꢃ
backlight
Press the EntEr/oK button.
ꢂ. Press the Exit button to exit.
adjust
return
Changing the Picture Size
tV
Picture
You can select the picture size which best corresponds to
your viewing requirements.
rmore
Size
digital nr
active Colour
dnle
: ꢀ6 : 9
: auto
: off
: off
: on
ꢀ. Press the mEnu button to display the menu.
Press the EntEr/oK button , to select "Picture".
movie Plus
reset
ꢁ. Press the
▲
or
▼
button to select "Size", then press the
: oK
EntEr/oK button.
3. Select the required option by pressing the
▲
or
▼
button.
move
Enter
return
Press the EntEr/oK button.
tV
Size
ꢂ. Press the Exit button to exit.
ꢀ6 : 9
Wide Zoom
Zoom
ꢀ6:9: Adjusts the picture size to 16:9 appropriate for DVDs or
wide broadcasting.
ꢂ : 3
Just Scan
Wide Zoom: Magnify the size of the picture more than 4:3.
Zoom: Magnifies the 16:9 wide picture (in the vertical direction)
to fit the screen size.
move
Enter
return
ꢂ:3: This is the default setting for a video movie or normal broadcasting.
Just Scan (hdmi only): Displays the input scenes as they are without
any cutoff when 720p,1080i,1080p(LA40M8,
LA46M8, LA52M8) signals are input.
In PC Mode, only "16:9" and "4:3" mode can be adjusted.
Zoom: Select
Use the
down.After selecting
by pressing the
or button to move the picture up and
, use the or button to
◄
or
►
buttons.
You can select these options
by simply pressing the P.SiZE
button on the remote control.
▲
▼
▲
▼
magnify or reduce the picture size in the vertical
direction.
Wide Zoom : Move the screen up/down using the▲ or ▼
buttons after selecting the
by pressing
the ► or EntEr/oK button.
English - ꢀ7
Download from Www.Somanuals.com. All Manuals Search And Download.
Freezing the Current Picture
Press the Still button to freeze a moving picture into a
still one. Press again to cancel.
digital nr / active Colour / dnie / movie Plus
if the broadcast signal received by your tV is weak, you can
tV
Picture
activate the digital noise reduction feature to help reduce
any static and ghosting that may appear on the screen.
rmore
Size
: ꢀ6 : 9
: auto
: off
: off
: on
digital nr
active Colour
dnle
movie Plus
reset
ꢀ. Press the mEnu button to display the menu.
Press the EntEr/oK button , to select "Picture".
: oK
ꢁ. Select the required option by pressing the ▲ or ▼ button,
then press the EntEr/oK button.
Available options: Digital NR, Active Colour, DNIe,Movie Plus.
move
Enter
return
3. When you are satisfied with your setting, press the
EntEr/oK button.
ꢂ. Press the Exit button to exit.
digital nr: off/low/medium/high/auto
If the signal received by the television is weak, you can activate this feature to reduce any static and
ghosting that may appear on the screen.
This function is not available in PC mode.
active Colour: off/on
If you turn on this option, the colors of the sky and grass will be stronger and clearer for a more
vivid on-screen picture.
This function is not available in PC mode.
This function is available in Dynamic mode
dnie : off/demo/on
This TV includes the DNIe function so as to provide a high visual quality. If you set DNIe to on, you
can view the screen with the DNIe feature activated. If you set the DNIe to Demo, you can view the
applied DNIe and normal pictures on the screen, for demonstration purposes. Using this function,
you can view the difference in the visual quality.
DNIeTM (Digital Natural Image engine)
This feature brings you more detailed image with 3D noise reduction, detail enhancement,
contrast enhancement and white enhancement. New image compensation Algorithm gives
brighter, clearer, more detailed image to you. DNIeTM technology will fit every signal into your eyes.
This function is not available in PC mode.
This function is not available in Movie mode
movie Plus: off/on
You can view more natural skin and clear text even in fast moving scenes.
Use this function when watching movies.
The Wide Zoom, Zoom and Just Scan mode is not supported.
This function is not available in PC mode.
English - ꢀ8
Download from Www.Somanuals.com. All Manuals Search And Download.
resetting the Picture Settings to the Factory defaults
You can return to the factory defaults picture settings.
tV
Picture
ꢀ. To select the desired picture effect, follow the
"Changing the Picture Standard" instructions number 1 to 3
(on page 14.)
rmore
Size
: ꢀ6 : 9
: auto
: off
digital nr
active Colour
dnle
ꢁ. Press the
▲
or
▼
button to select "Reset", then press the
: off
movie Plus
reset
: on
:
Cancel
EntEr/oK button.
oK
3. Press the ▲ or ▼ button to select “OK”,” Cancel”, then press
the EntEr/oK button.
move
Enter
return
ꢂ. Press the Exit button to exit.
The "Reset" will be set for each picture mode.
Viewing the Picture in Picture (PiP)
You can display a sub picture within the main picture of set
programme or video input. in this way, you can watch the
picture of set programme or video input from any connected
equipment while watching the main picture.
tV
Setup
rmore
Wall-mount ajustment
Energy Saving
hdmi black level
PiP
:
:
off
low
ꢀ. Press the mEnu button to display the menu.
Press the
▲
or
▼
button to select "Setup", then press the
EntEr/oK button.
ꢁ. Press the or
EntEr/oK button.
3. Press the EntEr/oK button again.
Press the or button to select "On",
then press EntEr/oK button.
ꢂ. Press the or button to select "Source", then press
EntEr/oK button. Select a source of the sub picture by
▲
▼
button to select "PIP", then press the
move
Enter
return
tV
PiP
PiP
: on
: tV
:
▲
▼
Source
Size
Position
Programme
:
▲
▼
: P ꢀ
pressing the
button.
▲
or
▼
button and press the EntEr/oK
move
Enter
return
The sub picture can serve different source selections
based on what the main picture is set to.
ꢃ. Press the
▲
or
▼
button to select "Size" of the sub picture
and then press the EntEr/oK button. Select a size of the sub
picture by pressing the
▲
or
▼
button and then press the
EntEr/oK button.
Press the PiP button on the
remote control repeatedly to activate
or deactivate the "PIP".
If main picture is in "PC" and “Component” mode, "Size" is
ꢀ
not available.
English - ꢀ9
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Press the
▲
or
▼
button to select "Position", then press the EntEr/oK button.
Select the position of the sub picture by pressing the
button.
▲
or
▼
button and then press the EntEr/oK
7. Press the
▲
or
▼
button to select "Programme" and then press the EntEr/oK button.
You can select the channel that you want to view through sub picture by pressing the
button. Press the EntEr/oK button.
▲
or
▼
The "Programme" can be active when the sub picture is set to TV.
8. Press the Exit button to exit.
You may notice that the picture in the PIP window becomes slightly unnatural when you use the
main screen to view a game or karaoke.
Source: Used to select a source of the sub picture.
Size: Used to select a size of the sub picture.
Position: Used to move the sub picture.
Programme: Used to Change the sub picture.
PiP Settings
o: PIP operates, x: PIP doesn’t operate
Sub
tV
aVꢀ
aVꢁ
S-Video
Componentꢀ,ꢁ
PC
hdmiꢀ,ꢁ,3
main
Component
O
O
O
X
X
X
X
hdmi
O
O
O
O
O
O
X
X
X
X
X
X
X
X
PC
English - ꢁ0
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the Sound Standard
You can select the type of the special sound effect to be used
when watching a given broadcast.
tV
Sound
mode
: Standard
Equalizer
SrS tS xt
auto Volume
internal mute
Sound Select
reset
ꢀ. Press the mEnu button to display the menu.
: off
: off
: off
: main
Press the
▲
or
▼
button to select "Sound", then press the
EntEr/oK button.
ꢁ. Press the EntEr/oK button again, to select "Mode".
3. Select the required sound effect by pressing the or
▲
▼
move
Enter
return
button repeatedly and then press the EntEr/oK button.
tV
Sound
ꢂ. Press the Exit button to exit.
mode
: C
Standard
Equalizer
SrS tS xt
auto Volume
internal mute
Sound Select
reset
music
movie
Speech
Custom
Standard: Selects the normal sound mode.
music: Emphasizes music over voices.
movie: Provides live and full sound for movies.
Speech: Emphasizes voices over other sounds.
Custom: Selects your custom sound settings.
(Refer to "Adjusting the Sound Settings")
:
:
: off
: main
move
Enter
return
adjusting the Sound Settings
the sound settings can be adjusted to suit your personal
tV
Sound
preferences.
mode
: Standard
Equalizer
SrS tS xt
auto Volume
internal mute
Sound Select
reset
ꢀ. Press the mEnu button to display the menu.
Press the ▲ or ▼ button to select "Sound", then press the
EntEr/oK button.
: off
: off
: off
: main
ꢁ. Press the ▲ or ▼ button to select "Equalizer", then press the
EntEr/oK button.
move
Enter
return
3. Press the ◄ or ► button to select a particular item.
Press the EntEr/oK button.
Equalizer
tV
ꢂ. Press the ▲ or ▼ button to reach the required setting.
Press the EntEr/oK button.
ꢃ. Press the Exit button to exit.
If you make any changes to these settings, the Sound Mode
is automatically switched to "Custom".
balance ꢀ00hz 300hz ꢀkhz 3khz ꢀ0khz
move
adjust
return
English - ꢁꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the truSurround xt (SrS tS xt)
truSurround xt is a patented SrS technology that solves
the problem of playing ꢃ.ꢀ multichannel content over two
speakers. truSurround delivers a compelling,virtual surround
sound experience through any two-speaker playback system,
including internal television speakers. it is fully compatible
with all multichannel formats.
tV
Sound
mode
: Standard
Equalizer
SrS tS xt
auto Volume
internal mute
Sound Select
reset
: off
: off
: off
: main
ꢀ. Press the mEnu button to display the menu.
Press the
▲
or
▼
button to select "Sound", then press the
move
Enter
return
EntEr/oK button.
tV
Sound
ꢁ. Press the ▲ or ▼ button to select "SRS TS XT", then press
mode
: Standard
Equalizer
SrS tS xt
auto Volume
internal mute
Sound Select
reset
the EntEr/oK button.
: off
on
:
3. Press the ▲ or ▼ button to select "On" or "Off". Press the
: off
: main
EntEr/oK button.
ꢂ. Press the Exit button to exit.
move
Enter
return
TruSurround XT, SRS and
symbol are
trademarks of SRS Labs, Inc. TruSurround XT
technology is incorporated under license from SRS
Labs, Inc.
You can also set these options
simply by pressing the SrS
button on remote control.
adjusting the Volume automatically
Each broadcasting station has its own signal conditions, and
so it is not easy for you to adjust the volume every time the
channel is changed. this feature allows you to automatically
adjust the volume of the desired channel by lowering the
sound output when the modulation signal is high or by
raising the sound output when the modulation signal is low.
tV
Sound
mode
: Standard
Equalizer
SrS tS xt
auto Volume
internal mute
Sound Select
reset
: off
: off
: off
: main
ꢀ. Press the mEnu button to display the menu.
Press the ▲ or ▼ button to select "Sound", then press the
EntEr/oK button.
move
Enter
return
tV
Sound
ꢁ. Press the ▲ or ▼ button to select "Auto Volume", then press
mode
: Standard
the EntEr/oK button.
Equalizer
SrS tS xt
auto Volume
internal mute
Sound Select
reset
: off
: off
: off
: main
3. Press the ▲ or ▼ button to select "On" or "Off". Press the
on
EntEr/oK button.
ꢂ. Press the Exit button to exit.
move
Enter
return
English - ꢁꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the internal mute
if you want to hear the sound through separate speakers,
tV
Sound
cancel the internal amplifier.
mode
: Standard
Equalizer
SrS tS xt
auto Volume
internal mute
Sound Select
reset
ꢀ. Press the mEnu button to display the menu.
Press the ▲ or ▼ button to select "Sound", then press the
EntEr/oK button.
: off
: off
: off
: main
ꢁ. Press the ▲ or ▼ button to select "Internal Mute", then press
the EntEr/oK button.
move
Enter
return
3. Press the ▲ or ▼ button to select "On" or "Off". Press the
tV
Sound
EntEr/oK button.
mode
: Standard
ꢂ. Press the Exit button to exit.
Equalizer
SrS tS xt
auto Volume
internal mute
Sound Select
reset
: off
: off
:
:
When "Internal Mute" is set to "On’, the Sound menus except
for "Sound Select" (in PIP mode) cannot be adjusted.
off
on
move
Enter
return
listening to the Sound of the Sub Picture
during the PiP features activation, you can listen to the
tV
Sound
mode
: Custom
sound of the sub picture.
Equalizer
SrS tS xt
auto Volume
internal mute
Sound Select
reset
: off
: off
: off
: main
ꢀ. Press the mEnu button to display the menu.
Press the ▲ or ▼ button to select "Sound", then press the
EntEr/oK button.
ꢁ. Press the ▲ or ▼ button to select "Sound Select", then press
the EntEr/oK button.
move
Enter
return
3. Press the ▲ or ▼ button to select "Main".
tV
Sound
Press the EntEr/oK button.
mode
: Custom
Equalizer
SrS tS xt
auto Volume
internal mute
Sound Select
reset
ꢂ. Press the Exit button to exit.
: off
: off
: off
main : Used to listen to the sound of the main picture.
Sub : Used to listen to the sound of the sub picture.
:
main
Sub
You can select this option when the “PIP” is set to “On”.
move
Enter
return
English - ꢁ3
Download from Www.Somanuals.com. All Manuals Search And Download.
resetting the Sound Settings to the Factory defaults
if game mode is on, the reset Sound function is activated.
tV
Sound
Selecting the reset function after setting the equalizer resets
the equalizer setting to the factory defaults.
mode
: Custom
Equalizer
SrS tS xt
auto Volume
internal mute
Sound Select
reset
: off
: off
: off
: main
ꢀ. Press the mEnu button to display the menu.
Press the ▲ or ▼ button to select "Sound", then press the
EntEr/oK button.
ꢁ. Press the ▲ or ▼ button to select "Reset", then press the
move
Enter
return
EntEr/oK button.
3. Press the Exit button to exit.
You can select this option when the "Game Mode" is set to "On".
Connecting headphones
You can connect a set of headphones to your set if you wish to
watch a tV programme without disturbing the other people in the
room.
When you insert the head set jack into the corresponding port, you
can operate only "SRS TS XT" and "Auto Volume" in Sound menu.
Prolonged use of headphones at a high volume may damage your
hearing.
You will not receive sound from the speakers when you connect headphones to the system.
The headphone volume and TV volume are adjusted differently.
Selecting the Sound mode
You can set the sound mode by pressing the “dual” button.
When you press it, the current sound mode is displayed on the
screen.
Audio Type
Mono
DUAL 1/2
MONO
Default
Automatic
change
FM
Stereo
You can also set these
options simply by
pressing the dual
button on remote control.
Stereo
Dual
STEREO ↔ MONO
DUAL 1 ↔ DUAL 2
MONO
DUAL 1
Mono
Automatic
change
NICAM
Stereo
Stereo
Dual
MONO ↔ STEREO
MONO ↔ DUAL 1
DUAL 2
DUAL 1
If the stereo signal is weak and an automatic switching occurs, then switch to the Mono.
English - ꢁꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting and displaying the Current time
You can set the tV’s clock so that the current time is
displayed when you press the inFo button. You must also
set the time if you wish to use the automatic on/off timers.
Setup
tV
Plug & Play
language
time
game mode
blue Screen
melody
: English
:
:
:
off
off
off
ꢀ. Press the mEnu button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the
EntEr/oK button.
PC
home theatre PC
smore
:
off
ꢁ. Press the ▲ or ▼ button to select "Time", then press the
move
Enter
return
EntEr/oK button.
tV
Clock Set
3. Press the EntEr/oK button to select "Clock Set".
ꢂ.
month
p
0ꢀ
day
Year
ꢁ007
Press the...
to...
0ꢀ
q
or
or
button.
button.
Move to Month, Day, Year, Hour, Minute or "am/pm
Set the Month, Day, Year, Hour Minute or "am/pm
Press the EntEr/oK button.
hour
minute am/pm
0ꢀ
00
am
move
adjust
return
ꢃ. Press the Exit button to exit.
If you disconnect the power cord, you have to set the clock again.
You can also set Year, Month, Day, Hour and Minute by pressing the number buttons on the
remote control.
Setting the Sleep timer
Setup
tV
You can select a time period of between 30 and ꢀ80 minutes
after which the television automatically switches to standby
mode.
Plug & Play
language
time
game mode
blue Screen
melody
: English
:
:
:
off
off
off
ꢀ. Press the mEnu button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the
EntEr/oK button.
PC
home theatre PC
smore
:
off
ꢁ. Press the ▲ or ▼ button to select "Time", then press the
move
Enter
return
EntEr/oK button.
tV
time
3. Press the ▲ or ▼ button to select "Sleep Timer", then press
Clock Set
Sleep timer
timerꢀ
timerꢁ
timer3
:
:
:
:
off
30
60
the EntEr/oK button.
ꢂ. Press the ▲ or ▼ button dly until the desired time
appears (Off, 30, 60, 90, 120, 150, 180).
Press the EntEr/oK button.
90
ꢀꢁ0
ꢀꢃ0
ꢀ80
ꢃ. Press the Exit button to exit.
move
Enter
return
The TV automatically switches to standby mode when the
timer reaches 0.
English - ꢁꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
Switching the television on and off automatically
Setup
tV
ꢀ. Press the mEnu button to display the menu.
Plug & Play
language
time
game mode
blue Screen
melody
PC
Press the ▲ or ▼ buttons to select "Setup", then press the
EntEr/oK button.
Press the ▲ or ▼ buttons to select "Time", then press the
EntEr/oK button.
: English
:
:
:
off
off
off
home theatre PC
smore
:
off
ꢁ. Press the ▲ or ▼ buttons to select "Timer 1,Timer 2,Timer 3 ",
then press the EntEr/oK button.
move
Enter
return
3. Press the ▲ or ▼ buttons to adjust “Hour”, then press the
button to move to the next step.
►
tV
timerꢀ
on time
Set other items using the same method as above.
▲
:
00
00
am
am
no
ꢀꢁ
▼
Yes/ No
Press the ▲or▼ button
Press the ▲or▼ button
off time
:
ꢀꢁ
no
Volume
repeat
Repeat
Select a Once, Everyday,
Mon-Fri, Mon-Sat, Sat-Sun
ꢀ0
once
Programme
0ꢀ
Volume
Adjust a 0~100
Press the ▲or▼ button
Press the ▲or▼ button
move
adjust
return
Programme
Adjust a Programme
When finished, press the rEturn button to return.
• The current time will appear every time you press the
inFo button.
• You can set the hour, minute directly by
pressing the number buttons on the remote control.
Press the Exit button to exit.
English - ꢁ6
Download from Www.Somanuals.com. All Manuals Search And Download.
Choosing Your language
Setup
tV
When you start using your set for the first time, you must
select the language which will be used for displaying menus
and indications.
Plug & Play
language
time
game mode
blue Screen
melody
: English
:
:
:
off
off
off
ꢀ. Press the mEnu button to display the on-screen menu.
Press the ▲ or ▼ button to select "Setup", then press the
EntEr/oK button.
PC
home theatre PC
smore
:
off
ꢁ. Press the ▲ or ▼ button to select "Language", then press
move
Enter
return
the EntEr/oK button.
Setup
tV
3. Select a particular language by pressing the ▲ or ▼ button
repeatedly.
Plug & Play
language
time
game mode
blue Screen
melody
: Eli
English
Press the EntEr/oK button.
:
:
:
Français
You can choose one of 5 languages.
PC
ꢂ. Press the Exit button to exit.
home theatre PC
smore
:
off
move
Enter
return
using game mode
Setup
When connecting to a game console such as PlayStationtm
or xboxtm, you can enjoy a more realistic gaming experience
by selecting game menu.
tV
Plug & Play
language
time
game mode
blue Screen
melody
: English
:
:
:
off
off
off
ꢀ. Press the mEnu button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the
EntEr/oK button.
PC
home theatre PC
smore
:
off
ꢁ. Press the ▲ or ▼ button to select "Game Mode", then press
move
Enter
return
the EntEr/oK button.
Setup
: English
tV
3. Press the ▲ or ▼ button to select "On" or "Off". Press the
Plug & Play
language
time
EntEr/oK button.
game mode
blue Screen
melody
:
:
:
off
off
on
ꢂ. Press the Exit button to exit.
To disconnect the game console and connect another
external device, cancel game mode in the setup menu.
If you display the TV menu in Game mode, the screen
shakes slightly.
PC
home theatre PC
smore
:
off
move
Enter
return
Game Mode is not available in TV mode.
If Game Mode is On:
• Picture Mode changes to Standard and Sound Mode changes to Custom automatically.
The user cannot change these to other modes.
• Sound Mode in the Sound menu is deactivated. Adjust the sound using the equalizer.
• The Reset Sound function is activated. Selecting the Reset function after setting the equalizer
resets the equalizer setting to the factory defaults.
English - ꢁ7
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the blue Screen mode / Selecting the melody
blue Screen:
Setup
tV
if no signal is being received or the signal is very weak, a
blue screen automatically replaces the noisy picture
background. if you wish to continue viewing the poor picture,
you must set the "blue Screen" mode to "off".
Plug & Play
language
time
game mode
blue Screen
melody
PC
: English
:
:
:
off
off
off
melody:
home theatre PC
smore
:
off
You can hear melody sound when the television is powered
on or off.
move
Enter
return
ꢀ. Press the mEnu button to display the menu.
Setup
tV
Press the ▲ or ▼ button to select "Setup", then press the
EntEr/oK button.
Plug & Play
language
time
: English
ꢁ. Press the ▲ or ▼ button to select "Blue Screen" or "Melody".
game mode
blue Screen
melody
PC
home theatre PC
smore
:
:
:
off
off
on
Press the EntEr/oK button.
3. When you are satisfied with your setting, press the
:
off
EntEr/oK button.
blue Screen: off/on
melody: off/low/medium/high
move
Enter
return
Setup
tV
Plug & Play
language
time
ꢂ. Press the Exit button to exit.
: English
game mode
blue Screen
melody
:
:
:
off
off
off
PC
low
home theatre PC
:
medium
high
smore
move
Enter
return
Setting the home theatre PC
You can view higher quality pictures by configuring the
screen settings in PC mode.
if you set the home theatre PC function to on, you can
configure the detailed Settings (when Picture mode is set to
Standard or movie) as in PC mode.
Setup
tV
Plug & Play
language
time
game mode
blue Screen
melody
: English
:
:
:
off
off
off
PC
ꢀ. Press the mEnu button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the
EntEr/oK button.
home theatre PC
smore
:
off
move
Enter
return
ꢁ. Press the ▲ or ▼ button to select "Home Theatre PC".
Setup
tV
Press the EntEr/oK button.
Plug & Play
language
time
game mode
blue Screen
melody
: English
3. Press the ▲ or ▼ button to select "Off" or "On".
Press the EntEr/oK button.
:
:
:
off
off
off
ꢂ. Press the Exit button to exit.
PC
home theatre PC
smore
:
off
This function is available only in PC mode.
on
move
Enter
return
English - ꢁ8
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the light Effect (la3ꢁr8, la37r8, laꢂ0r8)
You can turn on/off the blue lEd on the front of tV
according to the situation. use it for saving power or when
the lEd dazzles your eyes.
Setup
tV
Plug & Play
language
time
: English
game mode
blue Screen
melody
PC
home theatre PC
light Effect
smore
:
:
:
off
off
off
ꢀ. Press the mEnu button to display the on-screen menu.
Press the ▲ or ▼ buttons to select "Setup", then press the
EntEr/oK button.
:
:
off
Watching mode on
ꢁ. Press the ▲ or ▼ buttons to select “Light Effect”, then press
move
Enter
return
the EntEr/oK button.
Setup
tV
3. Select the required option (Off, Standby Mode On, Watching
Plug & Play
language
time
: English
Mode On, On) by pressing the ▲ or ▼ button. Press the
EntEr/oK button.
game mode
blue Screen
melody
PC
home theatre PC
light Effect
smore
:
:
:
off
off
off
• off: LED will not come on
• Standby mode on: Turns the LED on in standby mode
• Watching mode on: Turns the LED on while watching TV.
off
Standby mode on
atching mode on
W
:
:
on
• on: The LED ON condition if the unit in ON or OFF.
move
Enter
return
ꢂ. Press the Exit button to exit.
English - ꢁ9
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Energy Saving Feature
This function adjusts the brightness of the TV so as to reduce
power consumption. When you watching TV at night, set the
"Energy Saving " mode option to "High" so as to reduce the
dazzling of your eyes as well as the power consumption.
Setup
TV
rMore
Wall-Mount Ajustment
Energy Saving
HDMI Black level
PIP
: Off
: Low
1. Press the MENU button to display the on-screen menu.
Press the ▲ or ▼ button to select "Setup", then press the
ENTER/OK button.
2. Press the ▲ or ▼ button to select "Energy Saving", then
Move
Enter
Setup
Return
press the ENTER/OK button.
TV
3. Select the required option (Off, Low, Medium, High, Auto) by
rMore
Wall-Mount Ajustment
Energy Saving
HDMI Black level
PIP
pressing the ▲ or ▼ button. Press the ENTER/OK button.
: Off
:
Off
Low
Medium
High
4. Press the EXIT button to exit.
Auto
Move
Enter
Return
HDMI Black Level
You can directly select the black level on the screen to adjust
the screen depth.
Setup
TV
rMore
Wall-Mount Ajustment
Energy Saving
HDMI Black level
PIP
: Off
: Normal
1. Press the MENU button to display the menu.
Press the ▲ or ▼ buttons toselect “Setup”, then press the
ENTER/OK button.
2. Press the ▲ or ▼ buttons to select "HDMI Black Level", then
press the ENTER/OK button.
Move
Enter
Setup
Return
3. Press the ▲ or ▼ buttons to select “Normal” or “Low”, then
press the ENTER/OK button.
TV
rMore
4. Press the EXIT button to exit.
Wall-Mount Ajustment
Energy Saving
HDMI Black level
PIP
: Off
:
This Function is active only when the externel input
connects HDMI(RGB siginal).
Normal
Low
• Normal: The screen gets brighter.
• Low: The screen gets darker.
Move
Enter
Return
4. Press the EXIT button to exit.
English - 30
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the Source
oe
: Cuto
You can select among external sources connected to your
tV’s input jacks.
input
tV
Source list
Edit name
: tV
anynet+(hdmi-CEC)
ꢀ. Press the mEnu button to display the menu.
Press the ▲ or ▼ button to select “Input”, then press the
EntEr/oK button.
ꢁ. Press the EntEr/oK button again, to select "Source List".
When no external device is connected to your set, only
“TV” are activated in the “Source List”, “AV1”, “AV2”,
“S-Video”, “Component1”, “Component2”, “PC”, “HDMI1” ,
“HDMI2”, “HDMI3” are activated only when they are con-
nected to your set.
move
Enter
return
oe
: Cuto
Source list
tV
tV
aVꢀ
: ----
aVꢁ
: ----
S-Video
: ----
3. Select the required device by pressing the ▲ or ▼ button.
Componentꢀ
: ----
: ----
: ----
: ----
: ----
Componentꢁ
PC
Press the EntEr/oK button.
hdmiꢀ
hdmiꢁ
hdmi3
: ----
move
Enter
return
Press the SourCE button on the remote control to toggel
between all the available source.
TV mode can be selected by pressing the tV button, number
buttons(0~9), and the P
/
button on the remote control.
But it cannot be selected using the SourCE button.
Editing the input Source names
mode
: Custom
name the device connected to the input jacks to make your
input source selection easier.
input
tV
Source list
: tV
Edit name
anynet+(hdmi-CEC)
ꢀ. Press the mEnu button to display the menu.
Press the ▲ or ▼ button to select “Input”, then press the
EntEr/oK button.
ꢁ. Press the ▲ or ▼ button to select "Edit Name", then press
move
the EntEr/oK button.
Enter
return
3. Press the ▲ or ▼ button to select the device that you wish
Edit name
tV
to edit.
aVꢀ
aVꢁ
: ----
----
Press the EntEr/oK button.
: VCr
dVd
:
S-Video
ꢂ. Press the ▲ or ▼ button to select the required device.
d-VhS
:
Componentꢀ
Cable Stb
Press the EntEr/oK button.
Componentꢁ
PC
hdmiꢀ
:
hd Stb
:
Satellite Stb
ꢃ. Press the Exit button to exit.
:
: ----
q
hdmiꢁ
hdmi3
: ----
move
Enter
return
English - 3ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
teletext decoder
most set channels carry " teletext ", pages of written
information that provide information such as:
television programme times.
news bulletins and Weather forecasts.
Sports results.
Subtitles for the hard of hearing.
the teletext pages are organized according to six categories:
Contents
Part
a
b
C
d
Selected page number.
Broadcasting station identity.
Current page number or search status.
Date and time.
Text.
E
Status information.
F
displaying the teletext information
You can display teletext information at any time, but signal reception
must be good. otherwise:
information may be missing.
Some pages may not be displayed.
to activate the teletext mode and display the contents page:
ꢀ. Using the P
(
) or P
(
) button, select the channel providing
the teletext service.
ꢁ. Press the tExt/mix (
) button to activate the teletext mode.
The contents page is displayed. It can be redisplayed at any time
by pressing the mEnu ( ) button.
3. Press the tExt/mix (
) button again.
The actual broadcast will be displayed with "Teletext", "Double",
and "Mix" in order on the screen.
ꢂ. Press the tV button to exit from the Text display.
If any broken character appears while Text is being viewed, make
sure that the Text language is identical with the language in the
"Setup" menu mode. If both languages are different, select the same language with the Text
language on the "Setup" menu.
English - 3ꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting a Specific Teletext Page
Press the number buttons on the remote control to enter the
page number directly:
ꢀ. Enter the three-digit page number listed in the contents by
pressing the corresponding numeric buttons.
ꢁ. If the selected page is linked with several secondary pages, the
secondary pages are displayed in sequence. To freeze the
display on a given page, press the PiP ( ) . Press the PiP (
button again to resume.
)
3. Using the various display options:
Press the...
to display...
tExt/mix (
)
Both teletext information and the normal broadcast
Hidden text (answers to quiz games, for example)
The normal screen
inFo (
)
)
inFo (
PrE-Ch (
)
A secondary page, by entering its 4-digit number
P
P
(
(
)
)
The next page
The previous page
SourCE
Once
Twice
(
)
Double-size letters in the:
Upper half of the screen
Lower half of the screen
Three times
Normal screen
using Fastext to Select a teletext Page
the various topics included in the teletext pages are
colour-coded, and can be selected by pressing the coloured
buttons on the remote control.
ꢀ. Display the teletext contents page by pressing the
tExt/mix (
) button.
ꢁ. Press the coloured button corresponding to the topic that you
wish to select (The available topics are listed on the status
information line).
3. Press the Red button to display the previous page.
Press the Green button to display the next page.
ꢂ. Press the tV button to exit from the Text display.
English - 33
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up Your remote Control
after it has been set up properly, your remote control can
operate in five different modes: tV, dVd, Cable, Set-top box, VCr.
Pressing the corresponding button on the remote control allows
you to switch between these modes, and control whichever piece
of equipment you choose.
The remote control might not be compatible with all DVD Players,
VCRs, Cable boxes, and Set-Top Boxes.
Setting up the remote to operate Your VCr
ꢀ. Turn off your VCR.
ꢁ. Press the VCr button on your TV’s remote control.
3. Press the SEt button on your TV’s remote control.
ꢂ. Using the number buttons on your remote control, enter three digits
of the VCR code listed on page 36 of this manual for your brand of
VCR. Make sure you enter three digits of the code, even if the first
digit is a "0". (If more than one code is listed, try the first one.)
ꢃ. Press the PoWEr button on the remote control.
Your VCR should turn on if your remote is set up correctly.
If your VCR does not turn on after set up, repeat steps 2, 3, and
4, but try one of
the other codes listed for your brand of VCR.
If no other codes are listed, try each VCR code, 000 through 080.
Note on Using Remote Control Modes: VCR
When your remote control is in "VCR" mode, the volume buttons still
control your TV’s volume.
Setting up the remote to operate Your Cable box
ꢀ. Turn off your cable box.
ꢁ. Press the CablE button on your TV’s remote control.
3. Press the SEt button on your TV’s remote control.
ꢂ. Using the number buttons on your remote control, enter three digits
of the cable box code listed on page 37 of this manual for your brand
of cable box. Make sure you enter three digits of the code, even if the
first digit is a "0".
(If there is more than one code listed, try the first one.)
ꢃ. Press the PoWEr button on the remote control.
Your cable box should turn on if your remote is set up correctly.
If your cable box does not turn on after set up, repeat steps 2, 3, and 4,
but try one of the other codes listed for your brand of cable box. If no other codes are listed,
try each code, 000 through 046.
Note on Using Remote Control Modes: Cable Box
When your remote control is in "CABLE" mode, the volume buttons still control your TV’s volume.
English - 3ꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the remote to operate Your dVd
ꢀ. Turn off your DVD.
ꢁ. Press the dVd button on your TV’s remote control.
3. Press the SEt button on your TV’s remote control.
ꢂ. Using the number buttons on your remote control, enter three digits
of the DVD code listed on page 37~38 of this manual for your brand
of DVD. Make sure you enter three digits of the code, even if the first
digit is a "0". (If there is more than one code listed, try the first one.)
ꢃ. Press the PoWEr button on the remote control.
Your DVD should turn on if your remote is set up correctly.
If your DVD does not turn on after set up, repeat steps 2, 3, and 4,
but try one of the other codes listed for your brand of DVD.
If no other codes are list-ed, try each code, 000 through 141.
Note on Using Remote Control Modes: DVD
When your remote control is in "DVD" mode, the volume buttons still
control your TV’s volume.
Setting up the remote to operate Your Stb
ꢀ. Turn off your STB.
ꢁ. Press the Stb button on your TV’s remote control.
3. Press the SEt button on your TV’s remote control.
ꢂ. Using the number buttons on your remote control, enter three digits
of the STB code listed on page 38 of this manual for your brand of
STB. Make sure you enter three digits of the code, even if the first digit is
a "0". (If there is more than one code listed, try the first one.)
ꢃ. Press the PoWEr button on the remote control.
Your STB should turn on if your remote is set up correctly.
If your STB does not turn on after set-up, repeat steps 2, 3 and 4, but
try one of the other codes listed for your brand of STB.
(If no other codes are listed, try each code, 000 through 074.)
Note on Using Remote Control Modes: STB
When your remote control is in "STB" mode, the volume buttons still
control your TV’s volume.
English - 3ꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
remote Control Codes
VCr
brand
Code
brand
Code
SAMSUNG
ADMIRAL
AIWA
000 001 002 003 004 005 077 078 079
MONTGOMERY WARD
MTC
020
020
002 025
025
MULTITECH
NEC
002 005 025 038
007 008 018 026 037 062 064
020
AKAI
004 027 032
AUDIO DYNAMICS
BELL&HOWELL
BROKSONIC
CANDLE
007 026
OPTIMUS
ORION
018
073 074 075 076
021 056 071 072
019 041 075
008
022
PANASONIC
PENTAX
002 003 006 008 015 055
CANON
021 056
PENTEX
RESEARCH+
CITIZEN
002 003 006 008 015 055
PHILCO
021 056 059
COLORTYME
CRAIG
007
PHILIPS
021 080
002 024
PIONEER
PORTLAND
PROSCAN
QUARTZ
QUASAR
019 026 039 053
CURTIS MATHES
DAEWOO
DB
002 007 008 017 021 025 056 064 066
015 049 055
003 010 011 012 013 014 015 016
017
007 026
017
018
DIMENSIA
DYNATECH
ELECTROHOME
EMERSON
021 056
025
RADIO SHACK/
REALISTIC
006 018 020 021 024 025 029 034 048 056
034
001 003 006 021 022 025 030 032 034 040
047 050 052 060 063 065 066 067 069 073
RCA
002 017 019 021 035 041 043 057 068 076
SANSUI
026
FISHER
018 024 028 029 048 051 061
SANYO
018 024
FUNAI
025
SCOTT
003 047 052 067
GENERAL ELECTRIC
GO VIDEO
HARMAN KARDON
HITACHI
INSTANT REPLAY
JC PENNEY
JCL
002 005 017 021 056
SEARS
006 018 019 024 028 029 041 048 051
002
SHARP
020 034 045 015
007
SHIMTOM
SIGNATURE
SONY
027 033 038 058
019 025 041 042 074
025
021
027 033 044
002 007 018 019 021 026 037 041 054 056
SYLVANIA
SYMPHONIC
TANDY
021 025 056 059
007 008 018 021 026 037
025
JVC
081 082 083
018 025
KENWOOD
KLH
007 008 018 021 026 037
TASHIKA
TATUNG
006
070
037
KONIA
036
TEAC
025 037 068
LG(Goldstar)
LIOYD
006 007 008 009 010
TECHNICS
TEKNIKA
TMK
021
025
006 021 025 031
LOGIK
038
066
LXI
025
TOSHIBA
TOTEVISION
UNITECH
VECTOR RESEARCH
VICTOR
003 019 029 051 052
MAGNAVOX
MARANTZ
MARTA
021 056 059
002 006
007 008 018 021 026 037 062
002
006
007 026
MEI
021
026
MEMOREX
MGA
006 021 024 025
034
VIDEO CONCEPTS
VIDEOSONIC
WARDS
007 026
002
MIDLAND
MINOLTA
MITSUBISHI
005
002 003 006 019 020 021 024 025 034 038 041
007 008 018 026 037
019 041 075
019 034 041 046
YAMAHA
ZENITH
023 027 033
English - 36
Download from Www.Somanuals.com. All Manuals Search And Download.
CablE box
brand
Code
brand
Code
SAMSUNG
GI
000 001 002 003 004 005 006 007
REGENCY
SA
015 023
041
042 043
HAMLIN
HITACHI
JERROLD
MACOM
MAGNAVOX
OAK
003 024 031
025 030
SCIENTIFIC ATLAN
SPRUCER
STARGATE 2000
SYLVANIA
TEXSCAN
TOCOM
042 043
022
038 039
036
025 030
016
019 023 028
026
016
032
PANASONIC
PHILIPS
PIONEER
RCA
003 022 027 037 044
019 021 023 028
004 018 020 044
014 022 040
003
UNIVERSAL
VIEWSTAR
WAMER AMEX
ZENITH
033 034
019 021 023 028
046
017 029 035 037 045
REGAL
SamSung dVd
Product
Code
Product
Code
DVD
000 001 002
Home Theater VCR COMBO
HDD Recorder COMBO
TWIN TRAY COMBO
STB DVD COMBO
DVD Receiver
014 015 016
DVDR
003 004
017
018
019
020
021
BD Record
VCR COMBO
VCR Record
DHR COMBO
005 006
007 008 009 010 011
012
013
AV Receiver
dVd
brand
Code
brand
Code
092
ANAM
030
INTEGRA
JBL
AUDIOVOX
AUDIOLOGIC
ANABA
075
091
085
JVC
022 033 115 116
072
JATON
KENWOOD
KISS
073
APEX DIGITAL
AIWA
070 071 074 086 083 084 088 111 112
051 108 109
073
114
BROKSONIC
BLAUPUNKT
B&K
062
KONKA
KLH
059 100 106 107
074 075
025 031
057
074
122 123
LG(Goldstar)
LOEWE
LASONIC
CURTIS MATHES
CYBER HOME
CLARION
CIRRUS
027
077 078 079 082
058
080 125
081
MOBILE
AUTHORITY
054
MEMOREX
MALATA
055
CYBER HOME
CINEVISION
DAEWOO
DENON
065
056
095
MAGNAVOX
MINTEK
076 093
074 094
073
066
146
MONYKA
NORCENT
NEXT BASE
NEC
FARENHEIT
FISHER
067 068
090
048 049 050
052
GPX
060
053
GO VIDEO
GE
061 089 133 135
069 074
074
NANTAUS
NESA
144
074
GREENHILL
HITACHI
OPTOMEDIA
ELECTRONICS
105
064 113
071
HITEKER
HOYO
OPTIVIEW
ONKYO
072
073
076 092 119
044 045
046 047
023
HARMAN / KARDON
IRT
091 110
089
PHILCO
PRINCETON
PROSCAN
English - 37
Download from Www.Somanuals.com. All Manuals Search And Download.
dVd
brand
Code
brand
Code
145
PANASONIC
PHILIPS
ROTEL
RIO
024 034 124 134 136 137 138
THOMSON
TOSHIBA
TECHNICS
TVIEW
036 076
028 062 076
139
117 118
120
072
RCA
023 035 074 075 131 132
TOKAI
073
RAITE
073
TEAC
096
ROWA
038
TECHWOOD
TREDEX
097
SAMPO
SONY
104
098 099 101
076
026 029 126 127 128 129 130 141
URBAN CONCEPTS
VENTURER
VOCOPRO
YAMAHA
YAMAKAWA
XWAVE
SHERWOOD
SVA
039 041
042
075
102
SYLVANIA
SHARP
SANSUI
SANYO
SHINSONIC
043 093
140
032 063
040 073
103
062
062 090
094
ZENITH
076 121
SamSung SEt-toP box
Product
Code
001 002
003
Product
Code
010
011
Ground wave STB
Satellite STB
Satellite STB HDD COMBO Premium
CABLE STB HDD COMBO Standard
CABLE STB HDD COMBO Premium
Ground wave STB HDD COMBO Standard
Ground wave STB HDD COMBO Premium
CABLE STB
004
012
013
014
STB DVD COMBO
Satellite STB HDD COMBO Standard
008
009
SEt-toP box
brand
Code
023
brand
Code
ALPHASTAR
ANAM
MAGNAVOX
MEMOREX
MOTOROLA
MACOM
016 021 036 038 039 040 041 042
043
016
CHANNEL
MASTER
018 034
064
018
CROSSDIGITAL
CHAPARRAL
DIRECT TV
019
035
MITSUBISHI
NEXT LEVEL
PHILIPS
015
047 048 064
015 016 017 019 022 045 060 061 062
065 066 067 068
015 016 017 021 033 036 038 039 040
041 042 067
DAEWOO
074
PRIMESTAR
PANASONIC
PAYSAT
046 049 050 063
DISH NETWORK
SYSTEM
069 070
058 059 061 062
016
DISHPRO
DRAKE
069
PROSCAN
RCA
065 066
018 024 032
051 052 053 065 066
DX ANTENNA
ECHOSTAR
EXPRESSVU
GOI
027
RADIOSHACK
REALISTIC
STAR TRAK
STS
064
025 069 070 071
057
069
026
069
020 027
GE
065
SKY
031
GENERAL INSTRUMENT
HTS
046 047 048 063 064
SKY LIFE
SHACK
005 006 007
069
064
HOME CABLE
HITACHI
056
STAR CHOICE
SONY
064
022
054 060
HUGHES NETWORK
IQ
015 017
020
TOSHIBA
015 017 028 029 030 072
060 066
ULTIMATE TV
UNIDEN
ZENITH
IQ PRISM
020
016 021 037 055 056 057
024 031 068
JANEIL
059
JERROID
JVC
063
069 070
044 073
LG(Goldstar)
English - 38
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up Your PC Software (based on Windows xP)
the Windows display-settings for a typical computer are shown below. the
actual screens on your PC may be different depending upon your particular
version of Windows and your particular video card. Even if your actual
screens look different, the same, basic set-up information will apply in
almost all cases. (if not, contact your computer manufacturer or Samsung
dealer.)
ꢀ. First, click on "Control Panel" on the Windows start menu.
ꢁ. When the control panel window appears, click on "Appearance and Themes"
and a display dialog-box will appear.
3. When the control panel window appears, click on "Display" and a display dialog-box will appear.
ꢂ. Navigate to the "Settings" tab on the display dialog-box.
The correct size setting (resolution):
Optimum- (LA32R8, LA37R8, LA40R8) : 1360 X 768
(LA40M8, LA46M8, LA52M8) : 1920 X 1080
If a vertical-frequency option exists on your display settings dialog box, the correct value is
"60" or "60 Hz". Otherwise, just click "OK" and exit the dialog box.
display modes
both screen position and size will vary depending on the type of PC monitor and its resolution.
the resolutions in the table are recommended. (all resolutions between the supported limits are
supported)
(la3ꢁr8, la37r8, laꢂ0r8)
d-Sub input
mode
resolution
horizontal
Vertical
Pixel Clock
Sync Polarity
Frequency (khz) Frequency (hz
)
Frequency (mhz)
(h/V)
ibm
640 × 350
640 x 480
720 x 400
31.469
31.469
31.469
70.086
59.940
70.087
25.175
25.175
28.322
+ / -
- / -
- / +
VESa
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
1024 x 768
1024 x 768
1024 x 768
1360 x 768
37.861
37.500
37.879
48.077
46.875
48.364
56.476
60.023
47.712
72.809
75.000
60.317
72.188
75.000
60.000
70.069
75.029
60.015
31.500
31.500
40.000
50.000
49.500
65.000
75.000
78.750
85.800
- / -
- / -
+ /+
+ /+
+ /+
- / -
- / -
+ /+
+ /+
hdmi/dVi input
Pixel Clock
Frequency
(mhz)
horizontal
Frequency (khz)
Vertical
Frequency (hz)
Sync Polarity
mode
resolution
(h/V)
640×350
720×400
640×480
800×600
1024×768
1360×768
31.469
31.469
31.469
37.879
48.364
47.712
70.086
70.087
59.940
60.317
60.000
60.015
25.175
28.322
25.175
40.000
65.000
85.800
+/-
-/+
-/-
+/+
-/-
ibm
VESa
+/+
English - 39
Download from Www.Somanuals.com. All Manuals Search And Download.
(laꢂ0m8, laꢂ6m8, laꢃꢁm8)
d-Sub input
mode
resolution
horizontal
Vertical
Pixel Clock
Sync Polarity
Frequency (khz) Frequency (hz) Frequency (mhz)
(h/V)
640 X 350
640 x 480
720 x 400
31.469
31.469
31.469
70.086
59.940
70.087
25.175
25.175
28.322
+ / -
- / -
- / +
ibm
640 X 480
640 x 480
640 x 480
800 x 600
800 x 600
35.000
37.861
37.500
43.750
37.879
48.077
46.875
57.672
48.364
56.476
60.023
67.500
60.000
63.981
74.620
76.824
79.976
75.000
66.587
70.000
72.809
75.000
70.000
60.317
72.188
75.000
72.000
60.000
70.069
75.029
75.000
60.000
60.020
70.000
72.000
75.025
60.000
59.934
28.560
31.500
31.500
45.500
40.000
50.000
49.500
78.434
65.000
75.000
78.750
108.000
108.000
108.000
128.943
132.752
135.000
162.000
138.500
- / +
- / -
- / -
- / +
+ / +
+ / +
+ / +
- / -
VESa
800 x 600
800 x 600
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1152 x 864
1280 x 960
1280 x 1024
1280 x 1024
1280 x 1024
1280 x 1024
1600 x 1200
1920 x 1080
- / -
- / -
+ /+
+ / +
+ / +
+ / +
- / -
- / -
+ / +
+ / +
+ / -
hdmi/dVi input
Pixel Clock
Frequency
(mhz)
horizontal
Frequency (khz)
Vertical
Frequency (hz)
Sync Polarity
mode
resolution
(h/V)
640 X 350
640 X 480
720 X 400
800×600
1024×768
1280×1024
1920×1080
31.469
31.469
31.469
37.879
48.364
63.981
66.587
70.086
59.940
70.087
60.317
60.000
60.020
59.934
25.175
25.175
28.322
40.000
65.000
108.000
138.500
+ / -
- / -
- / +
+ / +
- / -
+ / +
+ / -
ibm
VESa
The interlace mode is not supported.
The set might operate abnormally if a non-standard video format is selected.
Separate and Composite modes are supported. SOG is not supported.
English - ꢂ0
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the PC
Coarse and Fine tuning of the image (image lock):
the purpose of picture quality adjustment is to remove or
reduce picture noise.
if the noise is not removed by Fine-tuning alone, then adjust
the frequency as best as possible (coarse) and Fine-tune
again. after the noise has been reduced, re-adjust the picture
so that it is aligned on the center of screen.
PC
tV
image lock
Position
auto adjustment
image reset
ꢀ. Preset: Press the SourCE button to select PC mode.
move
e
Enter
return
ꢁ. Press the mEnu button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the
EntEr/oK button.
image lock
tV
Coarse
ꢃ0
3. Press the ▲ or ▼ button to select "PC", then press the
Fine
0
EntEr/oK button.
ꢂ. Press the EntEr/oK button to select "Image Lock".
ꢃ. Press the ▲ or ▼ button to select "Coarse" or "Fine", then
press the EntEr/oK button.
move
6. Press the
◄
or
►
button to adjust the screen quality.
Enter
return
Press the EntEr/oK button.
7. Press the Exit button to exit.
Changing the image Position:
adjust the PC’s screen positioning if it does not fit the
tV screen.
Position
tV
ꢀ. Follow the "Coarse and Fine Tuning of the Image
(Image Lock)"
instructions number 1 to 3.
ꢁ. Press the ▲ or ▼ button to select "Position", then press the
EntEr/oK button.
move
Enter
return
3. Press the ▲ or ▼ button to adjusting the Vertical-Position.
Press the
◄
or
►
button to adjust the Horizontal-Position.
Press the EntEr/oK button.
ꢂ. Press the Exit button to exit.
tV
adjusting the PC Screen automatically (auto adjustment):
auto adjustment allows the PC screen of set to self-adjust to
the incoming PC video signal. the values of fine, coarse and
position are adjusted automatically.
PC
image lock
Position
auto adjustment
image reset
ꢀ. Follow the "Coarse and Fine Tuning of the Image
(Image Lock)" instructions number 1 to 3.
ꢁ. Press the ▲ or ▼ button to select "Auto Adjustment", then
press the EntEr/oK button.
move
Enter
return
3. Press the Exit button to exit.
initializing the image Settings (image reset):
You can replace all image settings with the factory default
values.
PC
tV
image lock
Position
auto adjustment
image reset
ꢀ. Follow the "Coarse and Fine Tuning of the Image
(Image Lock)" instructions number 1 to 3.
ꢁ. Press the ▲ or ▼ button to select "Image Reset", then press
the EntEr/oK button.
3. Press the Exit button to exit.
move
Enter
return
English - ꢂꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
What is anynet+?
anynet+ is an aV network system that enables an easy-to-use aV interface for users by controlling
all connected aV devices through the anynet+ menu when Samsung Electronics aV devices are
connected.
Connecting anynet+ devices
the anynet+ system supports aV devices supporting anynet+ only.
Check if there is an anynet+ mark on the aV device to be connected to the tV.
to directly connect to tV
Connect the [HDMI 1], [HDMI
2] or [HDMI 3] jack on the TV
tV
anynet+ device ꢀ anynet+ device ꢁ anynet+ device 3
and the HDMI OUT jack of the
corresponding Anynet+ device
using the HDMI cable.
hdmi ꢀ.3 Cable
hdmi ꢀ.3 Cable
hdmi ꢀ.3 Cable
to connect to home theater
ꢀ. Connect the [HDMI 1],
tV
[HDMI 2] or [HDMI 3]
jack on the TV and the
anynet+ device ꢀ
anynet+ device ꢁ
HDMI OUT jack of the
corresponding Anynet+
device using the HDMI
cable.
ꢁ. Connect the HDMI IN jack
of the home theater and
the HDMI OUT jack of the
corresponding Anynet+
device using the HDMI
cable.
hdmi ꢀ.3 Cable
hdmi ꢀ.3 Cable
anynet+ device 3
home theater
hdmi ꢀ.3 Cable
hdmi ꢀ.3 Cable
➣
➣
Connect only one receiver.
You can connect an Anynet+ device using the HDMI 1.3 cable. Some HDMI cables may not support Anynet+
functions.
➣
➣
Anynet+ works when the AV device supporting Anynet+ is in the Standby or On status.
Anynet+ supports up to 8 AV devices in total.
English - ꢂꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up anynet+
the following settings are to use anynet+ functions.
air ꢁ8
using the anynet+ Function
View tV
Select device
record
ꢀ. Press the anynet+ button.
Press the ▲ or ▼ button to select Setup, then press the
EntEr/oK button.
ꢁ. Press the EntEr/oK button to select anynet+ (hdmi-CEC),
then press the EntEr/oK button.
3. Press the ▲ or ▼ button to select on, then press the EntEr/
menu on device
device operation
receiver
:off
Setup
move
Exit
Enter
oK button.
➣
➣
➣
The Anynet+ (HDMI-CEC) function is enabled.
If you select off, Anynet+ (HDMI-CEC) is disabled.
When the Anynet+ (HDMI-CEC) function is disabled, all the
Anynet+ related operations are deactivated.
Setup
anynet+ (hdmi-CEC)
auto turn off
:
off
:
on
Searching Connections
move
Enter
return
turning an anynet+ device off automatically when the tV is
turned off
Setup
ꢀ. Press the ▲ or ▼ button to select auto turn off, then press
the EntEr/oK button.
ꢁ. Press the ▲ or ▼ button to select on, then press the EntEr/
oK button.
anynet+ (hdmi-CEC)
: on
auto turn off
off
Searching Connections
on
➣
➣
The Auto turn off function is enabled.
If you select off, the Auto turn off function is canceled.
Press the Exit button to exit.
The Select Device setting of the TV remote control is to be set to TV to use the Anynet+ function.
move
Enter
return
➣
➣
If you set Auto Turn Off to On, connected external devices are also turned off when the TV is turned off.
However, if the device is recording, it may not be turned off.
Scanning and Switching between anynet+ devices
ꢀ. Press the anynet+ button.
air ꢁ8
ꢁ. Press the ▲ or ▼ button to select Select device, then press
View tV
the EntEr/oK button.
dVdrꢀ
dVdrꢁ
dVdꢀ
Select device
record
3. Press the ▲ or ▼ button to select to a particular device and
press the EntEr/oK button.
dVdꢁ
menu on device
device operation
It is switched to the selected device.
ꢂ. If you cannot find a device you want, press the ▲ or ▼ button
to select Searching Connections, then press the EntEr/oK
button.
receiver
:off
Setup
The meassage Configuring anynet+ connection... is
displayed. When searching devices completes, the connected
devices are listed in the Anynet+ menu.
move
return
Enter
Setup
➣
➣
➣
➣
Switching to the selected devices may take up to 2 minutes. You
cannot cancel the operation during the switching operation.
The time required to scan for devices is determined by the number
of connected devices.
When the device scan is complete, the number of found devices
is not displayed.
anynet+ (hdmi-CEC)
auto turn off
:
:
on
on
Searching Connections
move
Enter
return
Although the TV automatically scans devices when it is turned on
using the PoWEr button, devices connected when the TV is on or under a specific circumstance are not
displayed in the device list. Therefore select Searching Connections menu to search devices.
If you have selected external input mode by pressing the SourCE button, you cannot use the Anynet+
function. Make sure to switch to an Anynet+ device by using the anynet+ button.
➣
English - ꢂ3
Download from Www.Somanuals.com. All Manuals Search And Download.
anynet+ menu
the anynet+ menu changes depending on the type and status of the anynet+ devices connected
to the tV.
anynet+ menu
View tV
description
Switches from Anynet+ to TV broadcast mode.
Your TV connects to the corresponding device.
Select device
record
Starts a recording. (This menu works only for a device supporting
recording.)
menu on device
Shows the menu of the connected device.
Example. When a DVD Recorder is connected, the DVD Recorder’s
title menu appears.
device operation
Shows the play control menu of the connected device.
Example. When a DVD Recorder is connected, the play control
menu of the DVD Recorder appears.
receiver
Sound is output through the receiver.
Setup
You can set the environment for using Anynet+.
tV remote Control buttons available in anynet+ mode
device type
operating Status
available buttons
After switching to the
Numeric buttons
device, when the menu of
the corresponding device is
displayed on the screen.
▲/▼/◄/►/EntEr buttons
Color buttons
Exit button
anynet+ device
◄◄(Backward search)
►►(Forward search)
(Stop)
After switching to the device,
while playing a file
►
ꢀ
ꢀ
(Play/Pause)
After switching to the device,
when you are watching a TV
program
device with built-in tuner
CH ▲/▼ button
VOL +/- button
audio device
When Receiver is activated
When watching TV
MUTE button
anyviewꢁ
►
ꢀ
ꢀ
(Play/Pause)
➣
➣
➣
The Anynet+ function only works when the remote control is set to TV.
The rEC button works only while in the recordable state.
You cannot control Anynet+ devices using the buttons on the side of the TV. You can control Anynet+
devices only using the TV remote control.
➣
➣
➣
➣
The TV remote control may not work under certain conditions. In this case, re-select the Anynet+ device.
The Anynet+ functions don’t operate for the products from other manufacturers.
In Anynet+ mode, the color buttons may not work properly.
The ◄◄, ►► operations may differ depending on the device.
recording
You can make a recording of a tV program using a recorder.
Press the rEC button.
Recording begins. (Only when the Anynet+ enabled recording device is connected.)
➣
The current TV program is recorded in the Watching TV status. If you are watching video from another
device, the video from the device is recorded.
➣
➣
You can also record the source streams by selecting record after pressing the Anynet+ button.
Before recording, check whether the antenna jack is properly connected to the recording device. For the
antenna connection to the recording device, refer to its user manual.
English - ꢂꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
listening through a receiver
You can listen to sound through a receiver instead of the tV speaker.
ꢀ. Press the anynet+ button.
air ꢁ8
Press the ▲ or ▼ button to select receiver, then press the
View tV
EntEr/oK button.
ꢁ. Press the ◄ or ► button to select to on, then press the
EntEr/oK button.
Select device
record
menu on device
device operation
Now you can listen to sound through the receiver.
3. Press the Exit button to exit.
receiver
:on
➣
When the receiver is set to On, you can listen to the TV sound
through the 2-channel receiver.
Setup
move
Exit
Enter
➣
If the receiver is exclusively for a home theater only (supporting
audio only), it may not appear in the device list.
➣
➣
In case of a content with copyright problem, listening through the receiver may not properly operate.
When listening through the receiver, there are restrictions for using the PIP and audio-related menu.
Check Points before requesting Service
Symptom
anynet+ does not
work.
Solution
■
Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+
devices only.
■
■
■
■
■
■
■
■
Connect only one receiver.
Check if the Anynet+ device power cord is properly connected.
Check the Anynet+ device’s Video/Audio/HDMI 1.3 cable connections.
Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu.
Check whether the TV remote control is in TV mode.
Check whether it is Anynet+ exclusive remote control.
Anynet+ doesn’t work at a certain condition. (Searching channels)
When connecting or removing the HDMI 1.3 cable, please make sure to search
devices again or restart your TV.
■
■
Check if the Anynet+ Function of Anynet+ device is set on.
Check if the Anynet+ device is properly connected to the TV and check if the
Anynet+ (HDMI-CEC) is set to On in the Anynet+ Setup menu.
Press the tV button on the TV remote control to switch to TV. Then press the
Anynet+ button to show the anynet+ menu and select a menu you want.
Select View tV in Anynet+ menu.
i want to start
anynet+.
■
i want to exit anynet+.
■
■
Press the SourCE button on the TV remote control and select a device other
than Anynet+ devices.
■
Press any of Ch, Ch liSt, PrE-Ch, and such to change to the
TV mode. (Note that the channel button operates only when a tuner-embedded
Anynet+ device is not connected.)
the Connecting to
anynet+ device…
message appears on
the screen.
■
■
You cannot use the remote control when you are configuring Anynet+ or
switching to a view mode.
Use the remote control when the Anynet+ setting or switching to view mode is
complete.
the anynet+ device
does not play.
You cannot use the play function when Plug & Play is in progress.
the connected device
is not displayed.
■
■
■
■
■
Check whether or not the device supports Anynet+ functions.
Check whether or not the HDMI 1.3 cable is properly connected.
Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu.
Search Anynet+ devices again.
You can connect an Anynet+ device using the HDMI 1.3 cable only. Some HDMI
cables may not support Anynet+ functions.
the tV program
cannot be recorded.
Check whether the antenna jack on the recording device is properly connected.
English - ꢂꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
Wall-mount adjustment (laꢂ0r8, laꢂ0m8, laꢂ6m8, laꢃꢁm8)(Sold separately)
once the wall mount is installed, the position of your tV can be easily adjustable.
tV rear Panel
auto Wall-mount
Serial Cable(ꢀP to ꢀP)(not supplied)
Entering the menu
e
Setup
tV
ꢀ. Press the mEnu button to display the menu.
Press the ▲ or ▼ button to select “Setup”, then press the
EntEr/oK button.
rmore
Wall-mount adjustment
Energy Saving :off
hdmi black level :off
PiP
ꢁ. Press the ▲ or ▼ buttons to select “Wall-Mount Adjustment”,
then press the EntEr/oK button.
move
3. Adjust to the desired position using the ▲,▼,◄,► buttons
Press the Exit button to exit.
Enter
return
If you press an arrow button when no OSD is displayed on the
Wall mount adjusment
TV screen, the Adjustment screen appears.
Positionꢀ
When you turn the power off, your TV moves to the initial installa-
tion position.
When you turn the power on, your TV moves to the last
remembered position you adjusted.
Position
ꢀ
ꢁ
3
adjust
Center
Exit
inFo
using the remote Control buttons
button
operations
Wall-mount angle
adjustment
Tilt Up, Tilt Down, Move right, Move left
Reset
Moves to the initial installation position
Remembering the
position and moving
to the remembered
position
Remembers 3 positions with the Red, Green and
Yellow buttons.
Moves to the remembered position using these 3
color buttons.
For installation, refer to the Installation Manual provided.
For product installation and the installation and moving of the wall mount, make sure to consult a
specialized installation company.
This installation manual is to be used when attaching the wall mount to a wall.
When attaching to other building materials, please contact your nearest dealer
English - ꢂ6
Download from Www.Somanuals.com. All Manuals Search And Download.
using the anti-theft Kensington lock
the Kensington lock is a device used to physically fix the system when using it in a public place.
the locking device has to be purchased separately. the appearance and locking method may dif-
fer from the illustration depending on the manufacturer. Please refer to the manual provided with
the Kensington lock for proper use.
ꢀ. Insert the locking device into
the Kensington slot on the
Cable
LCD TV (Figure 1), and turn it
in the locking direction
(Figure 2).
Figure 2
ꢁ. Connect the Kensington lock
Figure 1
cable.
3. Fix the Kensington lock to a
The place of the Kensington Lock may be
different depending on its model.
<optional>
desk or a heavy stationary
object.
troubleshooting: before Contacting Service Personnel
No sound or picture
Check that the mains lead has been connected to a wall socket.
Check that you have pressed the POWER
Check the picture contrast and brightness settings.
Check the volume.
buttons on the front of the set.
Normal picture but no
sound
Check the volume.
Check whether the MUTE
Check if "Internal Mute" is on
button has been pressed on the remote control.
No picture or black and
white picture
Adjust the colour settings.
Check that the broadcast system selected is correct.
Sound and picture
interference
Try to identify the electrical appliance that is affecting the set and move it
further away.
Plug your set into a different mains socket.
Blurred or snowy picture,
distorted sound
Check the direction, location and connections of your aerial.
This interference is often due to the use of an indoor aerial.
Remote control malfunctions
Replace the remote control batteries.
Clean the upper edge of the remote control (transmission window).
Check the battery terminals.
"Check signal cable."
message is displayed.
Check that the signal cable is firmly connected to the PC or video sources.
Check that the PC or video sources are turned on.
On PC mode, "Not Supported
Mode." message is displayed.
Check the maximum resolution and the frequency of the video adaptor.
Compare these values with the data in the Display Modes.
The TFT LCD panel uses a panel consisting of sub pixels (3,147,264 (LA32R8, LA37R8, LA40R8),
6,220,800 (LA40M8, LA46M8, LA52M8)) which require sophisticated technology to produce. However,
there may be few bright or dark pixels on the screen. These pixels will have no impact on the perfor-
mance of the product.
English - ꢂ7
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical and Environmental Specifications
model name
la3ꢁr8
32 inch
la37r8
37 inch
laꢂ0r8
40 inch
Screen Size (diagonal)
Power Consumption
PC resolution
150 W
170 W
210 W
1360 x 768 @ 60 Hz
1360 x 768 @ 60 Hz
1360 x 768 @ 60 Hz
Sound
Output
10 W X 2
10 W X 2
10 W X 2
dimension (Wxdxh)
Body
With stand
800 X 91 X 541 mm
800 X 252 X 581 mm
917 x 107 x 618 mm
917 x 300 x 661 mm
992 X 107 X 655 mm
992 X 300 X 698 mm
Weight
With stand
13.1 kg
20.1 kg
21.1 kg
Environmental
Considerations
10 °C to 40 °C (50 °F to 104 °F) 10 °C to 40 °C (50 °F to 104 °F) 10 °C to 40 °C (50 °F to 104 °F)
10 % to 80 %, non-condensing 10 % to 80 %, non-condensing 10 % to 80 %, non-condensing
-20 °C to 45 °C (-4 °F to 113 °F) -20 °C to 45 °C (-4 °F to 113 °F) -20 °C to 45 °C (-4 °F to 113 °F)
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
5 % to 95 %, non-condensing
5 % to 95 %, non-condensing
5 % to 95 %, non-condensing
model name
laꢂ0m8
40 inch
laꢂ6m8
46 inch
laꢃꢁm8
52 inch
Screen Size (diagonal)
Power Consumption
PC resolution
240 W
260 W
310 W
1920 X 1080 @ 60 Hz
1920 X 1080 @ 60 Hz
1920 X 1080 @ 60 Hz
Sound
Output
10 W X 2
10 W X 2
10 W X 2
dimension (Wxdxh)
Body
With stand
971 x 87 x 628 mm
971 x 300 x 687 mm
1106 x 104x 706 mm
1106 x 326 x 768 mm
1257 x 111 x 800 mm
1257 x 326 x 860 mm
Weight
With stand
20.7 kg
29.6 kg
36.4 kg
Environmental
Considerations
10 °C to 40 °C (50 °F to 104 °F) 10 °C to 40 °C (50 °F to 104 °F) 10 °C to 40 °C (50 °F to 104 °F)
10 % to 80 %, non-condensing 10 % to 80 %, non-condensing 10 % to 80 %, non-condensing
-20 °C to 45 °C (-4 °F to 113 °F) -20 °C to 45 °C (-4 °F to 113 °F) -20 °C to 45 °C (-4 °F to 113 °F)
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
5 % to 95 %, non-condensing
5 % to 95 %, non-condensing
5 % to 95 %, non-condensing
Stand Swivel (left / right)
-20˚ ~ 20˚
-20˚ ~ 20˚
Design and specifications are subject to change without prior notice.
This device is a Class B digital apparatus.
For the power supply, refer to the label attached to the product.
English - ꢂ8
Download from Www.Somanuals.com. All Manuals Search And Download.
This page is intentionally
left blank.
Download from Www.Somanuals.com. All Manuals Search And Download.
|